ffa ag mech cde electrical equipment id (state). 12/2 nm with ground
TRANSCRIPT
FFA Ag Mech CDE
Electrical Equipment ID (state)
12/2 NM with ground
12/2 NM
14/2 UF with ground
14/2 NM with ground
14/2 NM
12/3 UF with ground
12/3 NM with ground
12/3 NM
14/3 UF with ground
No. 10 TW
No. 12 TW
No. 14 TW
No. 6 Triplex
Conduit switch box - 2 1/2”
Conduit switch box - 3 1/2”
Switch box with clamps - 3 1/2”
Bevel Corner switch box - 2 1/2”
Handy box
Octagon box - 4”
Octagon box with clamps- 4”
Square outlet box - 4”
Raised cover for 4” square box
Octagon box extension ring
Square box extension ring
Single-pole toggle switch
Three-way toggle switch
Four-way toggle switch
Range Receptacle
Single 240-volt receptacle
Bushing for 1/2” conduit
Bushing for 3/4” conduit
Locknut for 1/2” conduit
Locknut for 3/4” conduit
Conduit Entrance elbow
Coupling for 1/2” thinwall conduit
Connector for 1/2” thinwall conduit
Connector for nonmetalllic cable
3/4” nonweatherproof service cable connector
Conduit entrance cap
Service cable entrance head
Flange-type entrance cap
Sill plate
Bronze clamp for 5/8” ground rod
Knockout seals for 1/2” openings
Porcelain service knob
4” square keyless receptacle
Blank cover for 4” octagon box
Blank cover for 4” square box
Rigid conduit – ½”
Thin-wall conduit – ½”
Rigid conduit – ¾”
Thin-wall conduit – ¾”
Solderless service connector (split-bolt type)
Handy box cover for toggle switch
Handy box cover for duplex receptacle
Wall plate for toggle switch
Wall plate for duplex receptacle
Wall plate for toggle switches, 2-gang
Wall plate for toggle switch and receptacle
Wedge-type clamps for triplex service drop
4” porcelain keyless lampholder
4” porcelain pull-chain lampholder
Single grounding receptacle with fuse holder
Combination switch and receptacle