fast drying wood stain & polyurethane - zar · fast drying wood stain & ... formulation,...
TRANSCRIPT
P L U SP L U S
• InteriorOil-Based
• Easy One-StepApplication
• Dries in 2 Hours• Brush on NewWood orPreviouslyFinished Wood
Finishing Tips
Fast DryingWood Stain &Polyurethane— All in One —
These chips have been reproduced as accurately as possible using process color lithography
U L T R A
Fast DryingWood Stain &Polyurethane— All in One —
UGL193(ZAR Plus)_ZAR PLUS BROCH 52340 4/5/17 4:26 PM Page 2
Beauty PlusProtection inHalf the Time
ULTRA ZAR® PLUS is the fast, easy way toa beautiful wood finish. With its uniqueformulation, ZAR® PLUS brushes on richbeautiful color and lasting protection in oneeasy step. No more staining and waiting withone product, then protecting with another.ULTRA ZAR® PLUS does both in half thetime!It enhances the beauty of wood and protectsthe surface with atough, abrasionresistantfinish. A thincoat ofZAR® PLUSeven revivesold varnishfinishes to theiroriginal luster. ULTRAZAR® PLUS is idealfor all interior woodsurfaces, furniture andcabinets.
ULTRA ZAR® PLUSis a unique blend ofwood stain andpolyurethane in one.Available in gloss andsatin sheens in sixpopular wood tones.
UGL193(ZAR Plus)_ZAR PLUS BROCH 52340 4/5/17 4:26 PM Page 3
PREPARATION:Make sure the surface isclean, dry and free from dirt,oil, grease, wax and polish.Wipe the surface with paintthinner.If you are working with barewood, sand thoroughly in thedirection of the grain usingsuccessively finer grades ofsandpaper up to 220 grit.On previously finishedwood* in good condition, alight sanding over the entirearea with 220 grit sandpaperwill help the finish to adhere.Remove all sanding dust using a tack cloth ora rag dampened with paint thinner.
APPLICATION:Stir well (do not shake orthin). Check color bybrushing on an unseen area.Flow on first coat usinglong, even strokes in thedirection of the grain.Maintain a wet edge andbrush out any lap marks.Allow to dry 2 hours, then rublightly using fine sandpaper orsteel wool. Wipe off dust witha tack cloth. Apply a second coat.Additional coats will produce a darker color.
Finishing Tips
*WARNING! If you scrape, sand, or remove old paint, you may release lead dust.LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS,SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANTWOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respiratorto control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.Before you start, find out how to protect yourself and your family by contacting theNational Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
UGL193(ZAR Plus)_ZAR PLUS BROCH 52340 4/5/17 4:26 PM Page 4
United Gilsonite LaboratoriesP.O. Box 70, Scranton, PA 18501 • Jacksonville, IL • Jackson, MS • Dayton, NV
Item # 52340 www.ugl.com Made in USA LR417
141 Honey Maple Gloss/162 Honey Maple Satin
These chips have been reproduced as accurately as possible using process color lithography.
142 Dark Mahogany Gloss/163 Dark Mahogany Satin
144 Teak Natural Gloss/167 Teak Natural Satin
147 Salem Maple Gloss/153 Salem Maple Satin
149 Fruitwood Gloss/155 Fruitwood Satin
150 Cherry Gloss/156 Cherry Satin
Color Selection
UGL193(ZAR Plus)_ZAR PLUS BROCH 52340 4/5/17 4:26 PM Page 1