factory training for trainers and end users

ASME B30.20 Section X Certain hazards cannot be abated by mechanical means… it is therefore essential to have personnel… who are… trained in the proper operation of the equipment and the handling of loads. “ ” The training includes… • A plant tour • Clamp operations (how they work) • Inspection procedures (ANSI/ASME) • Hands-on inspection of products • ASME clamp design categories • ASME clamp service class categories • Assembly of clamps (hands-on) • Disassembly of clamps (hands-on) • Product selection (choosing the correct clamp) • Application (correct use of product) • ASME B30/20 guidelines • Safety and maintenance procedures GRADUATE BENEFITS Those candidates who complete the two-day instruction will receive… • A Training Workbook • Do’s & Don’ts Operating Aids • Inspection and Maintenance Guidelines • Forms for Inspection and Maintenance Records • Copies of ANSI/ASME Pages (By Permission) • Maintenance and Inspection Kit • And Enrollment into the J.C Renfroe & Sons Alumni for current information exchange. TRAINING ENROLLMENT To enroll in Renfroe’s free training course, contact Clint Sage at 1-800-874-8454. Class sizes are limited. So reservations should be made 30 days in advance. FACTORY TRAINING FOR TRAINERS AND END USERS J.C. Renfroe & Sons offers a free two-day product and safety training course to increase the level of expertise for customers’ employees in the areas of application, inspection and maintenance of clamps and blocks.

Upload: others

Post on 23-Oct-2021

31 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: FACTORY TRAINING FOR TRAINERS AND END USERS

ASME B30.20 Section X

Certain hazards cannot be abated by mechanical means… it is therefore essential to have personnel… who are… trained in the

proper operation of the equipment and the handling of loads.“

”

The training includes…

• A plant tour

• Clamp operations (how they work)

• Inspection procedures (ANSI/ASME)

• Hands-on inspection of products

• ASME clamp design categories

• ASME clamp service class categories

• Assembly of clamps (hands-on)

• Disassembly of clamps (hands-on)

• Product selection (choosing the correct clamp)

• Application (correct use of product)

• ASME B30/20 guidelines

• Safety and maintenance procedures

GRADUATE BENEFITSThose candidates who complete the two-dayinstruction will receive…

• A Training Workbook

• Do’s & Don’ts Operating Aids

• Inspection and Maintenance Guidelines

• Forms for Inspection and Maintenance Records

• Copies of ANSI/ASME Pages (By Permission)

• Maintenance and Inspection Kit

• And Enrollment into the J.C Renfroe & Sons Alumni for current information exchange.

TRAINING ENROLLMENTTo enroll in Renfroe’s free training course, contact Clint Sage at

1-800-874-8454. Class sizes are limited. So reservations should

be made 30 days in advance.

FACTORY TRAINING FOR TRAINERS AND END USERSJ.C. Renfroe & Sons offers a free two-day product and safety training course to increase the level of expertise for customers’ employees in the areas of application, inspection and maintenance of clamps and blocks.

Training of Trainers Network Innovative practices and eLearning resources for training teachers & trainers Training of Trainers Network Innovative practices

Trainers Session1

Trainers katalog

Users Manual V1 - Nistunenistune.com/docs/NIStune Software Users Manual.pdfNistune Software Users Manual Page 3 of 74 ... Inside the folders are the BIN files from Nissan factory ROMs

CPR Trainers

Trainers Session2

Advanced Training of Trainers Trainers Guide

Asiafit trainers

Bahasa Instructor , Indonesian Instructor ,Private Tutors s Bahasa Language Instructor , Bahasa Language Trainers , Indonesian Trainers , Bahasa Trainers , Indonesian Trainers ,

Classic Trainers

Athletic Trainers

Demo - CADlink Digital Factory 2 Demo DigiTal faCTory highlighTs For both new and experienced users, the following sections highlight key features and functionality of