exponents mobile whiteboard - amazon s3 · position 1 (4) 1/4 - 20 nuts (4) washers (4) washers...

5
Page 1 of 5 939500682 Rev E Exponents Mobile Whiteboard If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Or visit our website: www.coalesse.com © 2012 Coalesse San Francisco, California U.S.A. Printed in U.S.A. Mobile Mediaboard 48”w (Model COCMBW) Mobile Mediaboard Mediascape 48”w (Model COC1MBWMS) - digital mediascape 1/2" socket 3/8" socket Note: - Intended for Institutional use. Model COCMBW is intended to be used with UL listed sub-assembly TV mount 228905. Model COC1MBWMS is intended to be used with UL listed sub-assembly mediascape Pan 23226201 and UL listed sub-assembly TV mount 228905. Marking:

Upload: others

Post on 17-May-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1 of 5939500682 Rev E

Exponents™ Mobile Whiteboard

If you have a problem, question, or request, callyour local dealer, or Coalesse at 1.800.627.6770Or visit our website: www.coalesse.com© 2012 Coalesse San Francisco, California U.S.A. Printed in U.S.A.

MobileMediaboard48”w(Model COCMBW)

MobileMediaboardMediascape48”w(Model COC1MBWMS) - digital mediascape

1/2" socket3/8" socket

Note: - Intended for Institutional use.

Model COCMBW is intended to be used with UL listed sub-assembly TV mount 228905.Model COC1MBWMS is intended to be used with UL listed sub-assembly mediascapePan 23226201 and UL listed sub-assembly TV mount 228905.

Marking:

IMPORTANT SAFETY INSTRUCTIONSWhen using an electrical furnishing, basic precautions should always be followed,including the following: Read all instructions before using the media:scape.

DANGER - To reduce the risk of electric shock:Always unplug this furnishing from the electrical outlet before cleaning.

DANGER - Pour réduire les risques de choc électrique:Débranchez toujours cet appareil de la prise électrique immédiatement après son utilisation.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:1) Unplug from outlet before putting on or taking off parts.2) Use this furnishing only for its intended use as described in these instructions. Donot use attachments not recommended by the manufacturer.3) Never operate this furnishing if it has a damaged cord or plug, Return thefurnishing to a service center for examination and repair.4) Keep the cord away from heated surfaces.5) Never operate the furnishing with the air openings blocked. Keep the air openingsfree of lint, hair, and the like.6) Never drop or insert any object into any opening.7) Do not use outdoors.8) Do not operate where aerosol (spray) products are being used or where oxygen isbeing administered.9) Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.

AVERTISSEMENT - Pour réduire les risques de brûlures, d'incendie, d'électrocution ou de blessures aux personnes:1) Débranchez de la prise de courant avant d'ajouter ou de retirer des pièces.2) Utilisez cet appareil que pour son utilisation prévue telle que décrite dans ces instructions. Ne pas utiliser de fixations non recommandées par le fabricant.3) Ne faites jamais fonctionner cet appareil s'il dispose d'une prise ou d'un cordon endommagé. Renvoyez l'appareil à un centre de services pour examen et réparation.4) Gardez le cordon loin de surfaces chauffées.5) Ne faites jamais fonctionner l'appareil avec des orifices d'air bloqués. Assurez-vous que les orifices d'air ne sont pas bloqués par des fibres, des cheveux, etc.6) N'insérez jamais ou ne laissez jamais tomber n'importe quel objet dans n'importe quel orifice.7) N'utilisez jamais à l'extérieur.8) Ne faites pas fonctionner lorsque des produits aérosol (bombe) sont utilisés ou lorsque l'oxygène est administré.9) Risque d'Electrocution - Branchez cet appareil seulement à une prise de courant correctement mise à la terre. Voir Instructions de Mise à la Terre.

SAVE THESE INSTRUCTIONSThis appliance is intended for commercial use only.Connect this appliance to a properly grounded outlet only. See Grounding Instructions.

Operating InstructionsPlease refer to the attached Installation Instructions.

User-Maintenance InstructionsThe receptacle power block is equipped with a circuit breaker that will shut off power in an overload condition. Press to reset the circuit breaker to restore power.

GROUNDING INSTRUCTIONSThis product must be grounded. If it should malfunction or breakdown, groundingprovides a path of least resistance for electric current to reduce the risk of electricshock. This product is equipped with a cord having an equipment-grounding conductorand a grounding plug. The plug must be plugged into an appropriate outlet that isproperly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductorcan result in a risk of electric shock. Check with a qualified electrician or serviceman ifyou are in doubt as to whether the product is properly grounded. Do not modify theplug provided with the product - if it will not fit the outlet, have a proper outlet installedby a qualified electrician.

DANGER - Le fait de ne pas brancher correctement le fil de mise à la terre peut entraîner un risque de choc électrique. Consultez un électricien ou un expert en réparation électrique en cas de doute quant au raccordement à la terre de l'appareil. Ne modifiez pas la fiche dont est doté l'appareil; si vous n'arrivez pas à la brancher dans la prise de courant, faites installer une fiche appropriée par un électricien qualifié.

This product is for use on a nominal 120-V circuit and has a grounding plug that lookslike the plug illustrated in sketch A in Figure 67.1. Make sure that the product isconnected to an outlet having the same configuration as the plug. No adapter shouldbe used with this product.

GROUNDEDOUTLET

GROUNDINGPIN

GROUNDEDOUTLET BOX

Figure 67.1Grounding methods

(A) (B)

METALSCREW

ADAPTER

TAB FORGROUNDING SCREW

Page 2 of 5 939500682 Rev E

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESEINSTRUCTIONS

Page 3 of 5 939500682 Rev E

CleaningInstaller’s instructions for initial cleaning at time of installationNote: these initial cleaning instructions are shipped with every board.

- For initial cleaning, wipe your board with a clean cloth moistened by mild, alcohol-based cleaner.

- Rinse with clear water. This step is simple, but very important.

- Wipe dry with clean cloth.

WARNINGRISK OF TIPPING OVER

Maximum monitor weight: 55 lbs

Intended monitor size: 40-42 inches (diagonal measurement)

ADVERTENCIARIESGO DE VOLTEARSE Peso máximo del monitor: 25 kgs

Use with heavier monitors may result in instability causing tipover resulting in death or serious injury.

El uso con monitores más pesados puede resultar en inestabilidad causando una volcadura lo que resultaen muerte o lesiones graves. Tamaño recomendado de monitor: 40-42 pulgadas (medido diagonalmente)

WARNING ATTENTION ADVERTENCIA

Only adults shouldmove this unit.

If not moved properly, unit can tip over and cause serious injury. Do not allow children under 16 to move cart. Move cart slowly.

S'il n'est pas correcte-ment manipulé, le chariot peut se renverser blessures. Ne laissez pas les enfants de moins 16 ans déplacer le chariot. Déplacez lentement le chariot.

Si no se la mueve correctamente, la unidad se puede caer y causar lesiones graves. No permita que los ninos menores de 16 anos muevan el carrito. Mueva el carrito despacio.

Seul des adultes devraient manipuler ce chariot.

Solo los adultos deben mover esta unidad.

Never apply forceat top.

Ne poussez jamaisdans le haut.

Nunca aplique fuerza en la partesuperior.

Never apply force on wide side.

Ne poussez jamais du côté large.

Nunca aplique fuerza sobre unlado.

Push. Don’t pull.

Poussez. Ne tirez pas.

Empuje. No hale.

Apply force at middle and on narrow side.

Poussez aumilieu et ducôté étroit du chariot.

Aplique fuerza en elcentro y el ladoestrecho.

When using an electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using the media:scape.

This appliance is intended for commercial use only. Connect this appliance to a properly grounded outlet only. See Grounding Instructions.

WARNING:Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over onto the child.

WARNING:Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result in death or serious injury due to the furnishing collapsing or turning over onto a child.

ATTENTION :Un enfant qui grimpe sur un meuble pour équipement audio ou vidéo pourrait subir de graves blessures pouvant même entraîner un décès. Le fait de placer une télécommande ou des jouets sur le meuble pourrait inciter un enfant à grimper sur le meuble, de sorte que ce dernier pourrait basculer pour écraser l'enfant.

ATTENTION :Placer de l'équipement audio ou vidéo dans un meuble non expressément conçu pour accueillir ce type d'équipement pourrait infliger de graves blessures à un enfant, voire même entraîner son décès, si le meuble venait à basculer ou à s'écrouler sur l'enfant.

Page 4 of 5 939500682 Rev E

2. Install monitor bracket using (4) - 1/4 - 20 bolts and (4) - 1/4 - 20 nuts and (8) washers. Determine hole position, 1 or 2 for needed height.

1. Remove back surface

3. Install monitor display brackets to monitor (see directions included with the bracket kit) and attach your monitor.

4. Route power cord from themonitor into power supply.Route data cables from powersupply to monitor.

Lift up to disengage hooks. Use suction cups to aid in removal

5. Replace the back surface

Max. TV size/width of 42”Note: Max. TV weight of 55 lbs.

MobileMediaboard48”w

Backsurface

Position 1(4) 1/4 - 20 Nuts

(4) Washers

(4) Washers

Backside

Position 2

(4) 1/4 - 20Bolts

Monitor

MonitorPowerCord

bracket

Powersupply

Note: notch and cord exit hole need to be on the same side

VGA & Audioor HDMI cablesto Monitor

Page 5 of 5939500682 Rev E

MobileMediaboardMediascape48”w

2. Install monitor bracket and media:scape pan using (2) - 1/4 - 20 bolts and (2) - 1/4 - 20 nuts and (4) washers, in hole position 2.

1. Remove back surface (see step 2 on page 4)

Position 2

(2) 1/4 - 20Bolts

Mountingbracket

(2) 1/4 - 20 Nuts

(2) Washers

(2) Washers

4. Install monitor display brackets on monitor (see directions included with the bracket kit) and attach your monitor.

6. Route media:scape power cable into the power supply.

7. Attach monitor to mounting bracket (see directions included with the bracket kit)

5. Plug in the power, monitor connection and audio from the monitor into media:scape controller

9. Replace the back surface

8. Route pucks to cutout tray and manage cable with wire clips attached to the backside of the whiteboard.Plug (2) puck cables and (2)puck cables with extension cablesinto the media:scape switcher box.

Monitorpower

Audio

Powersupply

Max. TV size/width of 42”Note: Max. TV weight of 55 lbs.

(2) 1/4 - 20 Nuts

(2) W

Washers

ashers

Media:scapepan

(2)

(2)

1/4 - 20Bolts

3. Finish step 3 using (2) - 1/4 - 20 bolts and (2) - 1/4 - 20 nuts and (4)washers through the lower slots in the mounting bracket and through the media:scape pan. An additionalset of bolts, nuts, washers attachthrough the two remaining holes.

Use extension cableson these (2) pucks

WireClips

Wire Clips