washers - konnect fastening systems€¦ · washers nord-lock® washers grade 316 nord-lock ®...

8
WASHERS

Upload: others

Post on 19-May-2020

58 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

WASHERS

Page 2: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STA

INLE

SS S

TEEL

FA

STEN

ERS

160

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

WAS

HER

S

WHY WE STOCK IT

WANT TO KNOW MORE?

VISIT YOUR LOCAL

BRANCHSEARCH US

ONLINECALL US See back of catalogue for more info.

NORD-LOCK’s unique bolt securing system consists of a pair of washers with a wedge-locking action that uses tension to make the bolt self-locking. Used together with a standard nut, NORD-LOCK achieves a locking that is superior to other locking hardware, especially under vibration or dynamic loads. In heavy industrial applications we recommend NORD-LOCK as a reliable and effective solution. NORD-LOCK washers are available through our national network of stores. Innovative products – just another way we’re making your job easier.

NORD-LOCK washers secure nuts and bolts better than any other self-locking system.

1. NORD-LOCK can be used with bolts in tapped holes.

2. NORD-LOCK can also be used in counter-bored holes.

3. Through holes require two pairs of NORD-LOCK washers. Keep the bolt secured when tightening the nut.

4. For slotted holes or on soft material, use a flanged nut/bolt together with NORD-LOCK “sp” (washers with enlarged outer diameter).

Page 3: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STAIN

LESS STEEL FASTEN

ERS

161

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

All Pack Size measurements are in inches unless stated otherwise.

WASH

ERS

NORD-LOCK® Washers

GRADE 316 NORD-LOCK® WASHERS GRADE 316 NORD-LOCK® WASHERS WITH ENLARGED OUTER DIAMETERDia. O.D Part No. Pairs per box

mm mm

3 7.0 NL3SS 2003.5 7.6 NL3.5SS 2004 7.6 NL4SS 2005 9.0 NL5SS 2006 10.8 NL6SS 200¼ inch 11.5 NL1/4SS 2008 13.5 NL8SS 200⅜ inch 16.6 NL3/8SS 20010 16.6 NL10SS 20011 18.5 NL11SS 20012 19.5 NL12SS 200½ inch 19.5 NL1/2SS 20014 23.0 NL14SS 10016 25.4 NL16SS 10018 29.0 NL18SS 100¾ inch 30.7 NL3/4SS 10020 30.7 NL20SS 10022 34.5 NL22SS 10024 39.0 NL24SS 1001 inch 39.0 NL1”SS 10027 42.0 NL27SS 50T27 42.0 NL27SST 5030 47.0 NL30SS 50T30 47.0 NL30SST 50T33 48.5 NL33SST 25T36 55.0 NL36SST 25T39 58.5 NL39SST 25T42 63.0 NL42SST 25

Dia. O.D Part No. Pairs per boxmm mm

3.5 9.0 NL3.5SSSP 2004 9.0 NL4SSSP 2005 10.8 NL5SSSP 2006 13.5 NL6SSSP 200¼ inch 13.5 NL1/4"SSSP 2008 16.6 NL8SSSP 200⅜ inch 21.0 NL3/8"SSSP 20010 21.0 NL10SSSP 20014 30.7 NL14SSSP 10016 30.7 NL16SSSP 10018 34.5 NL18SSSP 100¾ inch 39.0 NL3/4"SSSP 10020 39.0 NL20SSSP 100

T = thickness 6.6 - 6.8mm with inner chamfer

Konnect Safety Glasses• The glasses are lightweight, and

provide great coverage for your eyes • This classic design provides medium impact protection• Choose from a variety of lens tints including

mirrors and antifog • Australian Standards Medium Impact AS/NZS1337.1

Part No. Colour

KONSGC Clear

KONSGS Smoke

Page 4: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STA

INLE

SS S

TEEL

FA

STEN

ERS

162

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

* All Pack Size measurements are in inches unless stated otherwise.

WAS

HER

S

Flat Round Washers

I.D (d) O.D (d1) Thick (s) Part No. Packinch inch gauge qty

⅛ 5/16 22 18X516G304W 200⅛ ⅜ 20 18X38G304W 2005/32 ⅜ 20 532X38G304W 2005/32 7/16 20 532X716G304W 2003/16 7/16 20 316X716G304W 2003/16 ½ 20 316X12G304W 1003/16 ¾ 18 316X34G304W 1003/16 ⅞ 18 316X78G304W 1003/16 1 16 316X1G304W 1003/16 1¼ 16 316X1.14G304W 100¼ ½ 20 14X12G304W 100¼ 9/16 18 14X916G304W 100¼ ⅝ 18 14X58G304W 100¼ ¾ 18 14X34G304W 100¼ 1 16 14X1G304W 100¼ 1¼ 16 14X1.14G304W 1005/16 ⅝ 18 516X58G304W 1005/16 ¾ 18 516X34G304W 1005/16 1 16 516X1G304W 1005/16 1¼ 16 516X1.14G304W 100⅜ ¾ 18 38X34G304W 100⅜ 1 16 38X1G304W 100⅜ 1¼ 16 38X1.14G304W 100⅜ 1½ 14 38X1.12G304W 100½ 1 16 12X1G304W 100½ 1¼ 14 12X1.14G304W 100½ 2 14 12X2G304W 50⅝ 1¼ 16 58X1.14G304W 100⅝ 1½ 14 58X1.12G304W 100¾ 1½ 14 34X1.12G304W 100¾ 1⅞ 12 34X1.78G304W 100⅞ 1⅝ 14 78X1.58G304W 50⅞ 2 12 78X2G304W 501 1⅞ 12 1X1.78G304W 501 2 10 1X2G304W 501 2½ 10 1X2.12G304W 50

I.D (d) O.D (d1) Thick (s) Part No. Packinch inch gauge qty

3/16 7/16 20 316X716G316W 2003/16 ½ 20 316X12G316W 1003/16 ¾ 18 316X34G316W 1003/16 ⅞ 18 316X78G316W 1003/16 1 16 316X1G316W 1003/16 1¼ 16 316X1.14G316W 100¼ ½ 20 14X12G316W 100¼ 9/16 18 14X916G316W 100¼ ⅝ 18 14X58G316W 100¼ ¾ 18 14X34G316W 100¼ ⅞ 18 14X78G316W 100¼ 1 16 14X1G316W 100¼ 1¼ 16 14X1.14G316W 1005/16 ⅝ 18 516X58G316W 1005/16 ¾ 18 516X34G316W 1005/16 1 16 516X1G316W 1005/16 1¼ 16 516X1.14G316W 100⅜ ¾ 18 38X34G316W 100⅜ ⅞ 18 38X78G316W 100⅜ 1 16 38X1G316W 100⅜ 1¼ 16 38X1.14G316W 100⅜ 1½ 14 38X1.12G316W 100⅜ 2 3mm 38X2X3G316W 507/16 1⅛ 16 716X1.18G316W 100½ 1 16 12X1G316W 100½ 1¼ 14 12X1.14G316W 100½ 2 14 12X2G316W 509/16 1¼ 14 916X1.14G316W 100⅝ 1¼ 16 58X1.14G316W 100⅝ 1½ 14 58X1.12G316W 100¾ 1½ 14 34X1.12G316W 100¾ 1⅞ 12 34X1.78G316W 100⅞ 1⅝ 14 78X1.58G316W 50⅞ 2 12 78X2G316W 501 1⅞ 14 1X1.78G316W 501 2½ 10 1X2.12G316W 501⅛ 2½ 10 1.18X2.12G316W 201¼ 2¾ 10 1.14X2.34G316W 201½ 3¼ 10 1.12X3.14G316W 102 3¾ 4mm 2X3.34X4G316W 10

GRADE 304 IMPERIAL FLAT ROUND WASHERS

GRADE 316 IMPERIAL FLAT ROUND WASHERS

Page 5: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STAIN

LESS STEEL FASTEN

ERS

163

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

All Pack Size measurements are in inches unless stated otherwise.

WASH

ERS

I.D (d) O.D (d1) Thick (s) Part No. Packmm mm mm qty

3 7 0.5 3MG304W 2004 9 0.8 4MG304W 2005 10 0.8 5MG304W 2006 12.5 1.2 6MG304W 1008 17 1.2 8MG304W 10010 21 1.2 10MG304W 10012 24 1.5 12MG304W 10014 28 1.5 14MG304W 10016 30 1.5 16MG304W 10020 37 2 20MG304W 10022 39 2.5 22MG304W 5024 44 3 24MG304W 5030 56 3 30MG304W 20

I.D (d) O.D (d1) Thick (s) Part No. Packmm mm mm qty

5 15 1.2 5X15X1.2MG304DINW 1006 18 1.6 6X18X1.6MG304DINW 1008 24 2 8X24X2MG304DINW 10010 30 2.5 10X30X2.5MG304DINW 10012 37 3 12X37X3MG304DINW 10016 50 3 16X50X3MG304DINW 5020 60 4 20X60X4MG304DINW 50

I.D (d) O.D (d1) Thick (s) Part No. Packmm mm mm qty

5 15 1.2 5X15X1.2MG316DINW 1006 18 1.6 6X18X1.6MG316DINW 1008 24 2 8X24X2MG316DINW 10012 37 3 12X37X3MG316DINW 100

I.D (d) O.D (d1) Thick (s) Part No. Packmm mm mm qty

6 12.5 1.2 6MG316W 1008 17 1.2 8MG316W 10010 21 1.2 10MG316W 10012 24 1.5 12MG316W 10014 28 1.5 14MG316W 10016 30 1.5 16MG316W 10020 37 2 20MG316W 10022 39 2.5 22MG316W 10024 44 3 24MG316W 5027 50 3 27MG316W 2530 56 3 30MG316W 2033 60 3 33MG316W 2036 66 5 36MG316W 1042 78 5 42MG316W 1048 92 5 48MG316W 10

I.D (d) O.D (d1) Thick (s) Part No. Packmm mm mm qty

5 10 1 5X10X1MG304DINW 2006 12.5 1.6 6X12.5X1.6MG304DINW 1008 17 1.6 8X17X1.6MG304DINW 10010 21 2 10X21X2MG304DINW 10012 24 2.5 12X24X2.5MG304DINW 10016 30 3 16X30X3MG304DINW 10020 37 3 20X37X3MG304DINW 100

GRADE 304 METRIC FLAT ROUND WASHERS

GRADE 316 METRIC FLAT ROUND WASHERS

GRADE 304 IMPERIAL FLAT ROUND WASHERS DIN STANDARD

I.D (d) O.D (d1) Thick (s) Part No. Packmm mm mm qty

2 5 0.3 2X5X0.3MG316DINW 2002.5 6 0.5 2.5X6X0.5MG316DINW 2003 7 0.5 3X7X0.5MG316DINW 2004 9 0.8 4X9X0.8MG316DINW 2005 10 1 5X10X1MG316DINW 2006 12.5 1.6 6X12.5X1.6MG316DINW 1008 17 1.6 8X17X1.6MG316DINW 10010 21 2 10X21X2MG316DINW 10012 24 2.5 12X24X2.5MG316DINW 10014 28 2.5 14X28X2.5MG316DINW 10016 30 3 16X30X3MG316DINW 10018 34 3 18X34X3MG316DINW 10020 37 3 20X37X3MG316DINW 10022 39 3 22X39X3MG316DINW 10024 44 4 24X44X4MG316DINW 5039 72 6 39X72X6MG316DINW 10

GRADE 316 METRIC FLAT ROUND WASHERS DIN STANDARD

Mudguard Washers

GRADE 304 METRIC MUDGUARD WASHERS DIN STANDARD

GRADE 316 METRIC MUDGUARD WASHERS DIN STANDARD

Page 6: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STA

INLE

SS S

TEEL

FA

STEN

ERS

164

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

* All Pack Size measurements are in inches unless stated otherwise.

WAS

HER

S

I.D Part No. Packmm qty

2 2MG304SW 2002.5 2.5MG304SW 2003 3MG304SW 2004 4MG304SW 2005 5MG304SW 2006 6MG304SW 1008 8MG304SW 10010 10MG304SW 10012 12MG304SW 10016 16MG304SW 10020 20MG304SW 100

I.D Part No. Packinch qty

2G 2GG304SW 2004G 4GG304SW 200⅛ 18G304SW 2005/32 532G304SW 2003/16 316G304SW 200¼ 14G304SW 1005/16 516G304SW 100⅜ 38G304SW 100½ 12G304SW 1009/16 916G304SW 100⅝ 58G304SW 100¾ 34G304SW 100⅞ 78G304SW 501 1G304SW 50

I.D Part No. Packinch qty

⅛ 18G316SW 2005/32 532G316SW 2003/16 316G316SW 200¼ 14G316SW 1005/16 516G316SW 100⅜ 38G316SW 1007/16 716G316SW 100½ 12G316SW 1009/16 916G316SW 100⅝ 58G316SW 100¾ 34G316SW 100⅞ 78G316SW 501 1G316SW 501⅛ 1.18G316SW 251¼ 1.14G316SW 251½ 1.12G316SW 10

I.D Part No. Pack mm qty

2 2MG316SW 2002.5 2.5MG316SW 2003 3MG316SW 2004 4MG316SW 2005 5MG316SW 2006 6MG316SW 1008 8MG316SW 10010 10MG316SW 10012 12MG316SW 10014 14MG316SW 10016 16MG316SW 10018 18MG316SW 10020 20MG316SW 10024 24MG316SW 5027 27MG316SW 2530 30MG316SW 2536 36MG316SW 10

GRADE 304 METRIC SPRING WASHERS SINGLE COIL

GRADE 304 MEDIUM SECTION SPRING WASHERS SINGLE COIL

GRADE 316 MEDIUM SECTION SPRING WASHERS SINGLE COIL

GRADE 316 METRIC SPRING WASHERS SINGLE COIL

Spring Washers Single Coil

Page 7: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STAIN

LESS STEEL FASTEN

ERS

165

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

All Pack Size measurements are in inches unless stated otherwise.

WASH

ERS

Tooth Lock Washers

Serrated Tooth Lock Washers

Belleville Washers

GRADE 304 INTERNAL TOOTH LOCK WASHERS

GRADE 304 INTERNAL SERRATED TOOTH LOCK WASHERS

GRADE 304 EXTERNAL SERRATED TOOTH LOCK WASHERS

GRADE 316 INTERNAL SERRATED TOOTH LOCK WASHERS

GRADE 304 EXTERNAL TOOTH LOCK WASHERS

I.D O.D Thick Part No. Pack sizemm mm mm

2.5 5.5 0.4 2.5MG304ITW 5003 6 0.4 3MG304ITW 5004 8 0.5 4MG304ITW 5005 10 0.6 5MG304ITW 2006 11 0.7 6MG304ITW 2008 15 0.8 8MG304ITW 20010 18 0.9 10MG304ITW 20012 20.5 1.0 12MG304ITW 10016 26 1.2 16MG304ITW 10020 33 1.4 20MG304ITW 100

I.D O.D Thick Part No. Pack sizemm mm mm

5 10 0.6 5MG304ISW 2006 11 0.7 6MG304ISW 2008 15 0.8 8MG304ISW 20010 18 0.9 10MG304ISW 200

I.D O.D Thick Part No. Pack sizemm mm mm

4 8 0.5 4MG304ESW 5006 11 0.7 6MG304ESW 20010 18 0.9 10MG304ESW 20012 20.5 1.0 12MG304ESW 100

I.D O.D Thick Part No. Pack sizemm mm mm

5 10.0 0.6 5MG316ESW 2006 11.0 0.7 6MG316ESW 2008 15.0 0.8 8MG316ESW 20010 18.0 0.9 10MG316ESW 20012 20.5 1.0 12MG316ESW 10016 26.0 1.2 16MG316ESW 100

I.D O.D Thick Part No. Pack sizemm mm mm

3 6 0.4 3MG304ETW 5004 8 0.5 4MG304ETW 5005 10 0.6 5MG304ETW 5006 11 0.7 6MG304ETW 2008 15 0.8 8MG304ETW 20010 18 0.9 10MG304ETW 20012 20.5 1.0 12MG304ETW 10016 26 1.2 16MG304ETW 100

GRADE 304 BELLEVILLE WASHERSDia. Part No. Pack sizemm

4 4MG304BW 1005 5MG304BW 1006 6MG304BW 1008 8MG304BW 10010 10MG304BW 10012 12MG304BW 10016 16MG304BW 10020 20MG304BW 100

Page 8: WASHERS - Konnect Fastening Systems€¦ · washers nord-lock® washers grade 316 nord-lock ® washers grade 316 nord-lock washers with dia. o.d part no. pairs per box enlarged outer

STA

INLE

SS S

TEEL

FA

STEN

ERS

166

We make it easier to buy. www.konnectshop.comAUST: 1300 KONNECT (566632) NZ: 0508 KONNECT (566632)

Some products may not be available in all branches. Contact your local Sales Representative.

* All Pack Size measurements are in inches unless stated otherwise.

WAS

HER

S

Crinkle Washers

Curved Washers

Cup Washers

GRADE 304 CRINKLE WASHERS

GRADE 304 CURVED WASHERS

GRADE 304 CUP WASHERSDia. Part No. Pack sizemm

2 2MG304CRW 1002.5 2.5MG304CRW 1003 3MG304CRW 1004 4MG304CRW 1005 5MG304CRW 1006 6MG304CRW 1008 8MG304CRW 10010 10MG304CRW 100

Dia. Part No. Pack sizemm

3 3MG304CUW 1004 4MG304CUW 1005 5MG304CUW 2006 6MG304CUW 100

Dia. Part No. Pack size6G 6G304CW 2008G 8G304CW 20010G 10G304CW 20012G 12G304CW 20014G 14G304CW 200

Konnect Jobber Drills - 6mm Metric• 135° Split Point cuts faster and reduces wandering

• Fully ground M2 HSS increases drill life • Packs of 10# K6MJDBU Drill Diam 6.0mm, OA length 93mm, FL 57mm