parts washers sj-15 10 - amb tools washers ® north america’s largestmanufacturer of industrial...

2
PARTS WASHERS ® North America’s LARGEST Manufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS SJ-15 / 10 Top-Load Automatic Aqueous Parts Washers with a Water-Propelled Spray Bar Up to 18" Working Height 1-Year Warranty Patented Spray Wash Technology Eliminates Need for Drive Motor, Gears, Pulleys, etc. Momentary Safety Switch automatically turns off pump when lid is opened to protect opera- tor from hot-water spray. SJ-15’s extra large, 90-Gallon Tank, nearly twice the capacity of comparable parts wash- ers, keeps water hotter and cleaner longer. Metal Chip Trays, located directly below the basket, retain heat in the cleaning solu- tion and prevent stray parts and large metal shavings from falling into the tank. Without the trays, wash water would have to be drained to retrieve stray parts. A Brush Brake stops spray bar from spinning when lid is opened to protect operator from hot-water splash. Low-Water Shutoff valve turns off the unit if the tank solution level drops too low thus protecting both the heating element and pump from damage; optional Automatic Water Fill replenishes the tank. Cabinet is made of 14-Gauge Steel and is protected by a two- step liquid polyurethane paint similar to what’s used in the automotive industry. Stainless Steel Strainer filters debris and solids to as small as 0.008 inches, extending the life of the cleaning solution. Strainer is easy to remove and clean for reuse. Carbon graphite Rotary Union with non-corrosive seals and hardened stain- less steel pin provides reli- able rotation of spray arm. High-efficiency calrod Heating Element is protected in an incoloy sheath for long life; Adjustable Thermostat, 50-175°F. Tri-Lingual Operat- ing Instructions and Warning Labels pro- vide owner liability protection. REGISTERED ® Since 1969 With up to 23 precision spray nozzles on the water-propelled spinning Spray Bar, parts are hit from every angle and are never more than 18 inches from the spray nozzle creating a Surround Cleaning effect. Made in USA Automatic 1-hour Wash Timer allows for unattended operation plus protects against operator neglect; 7-day programmable Heater Timer saves energy by turning off heater when not in operation for long periods. Automatic disc Oil Skimmer removes excess floating oils from solution tank. www.landa.com Time-tested, 3 HP Vertical Seal-less Pump delivers a water flow of up to 37 GPM with less main- tenance than pumps used in conventional parts washers. NOW WITH AUTOMATED OIL SKIMMER AS A STANDARD FEATURE Shown with optional caster wheels and side-mounted tool tray Two side-mounted Gas Struts make it easy to lock open and close the lid with only one hand. Highly efficient Vent design in the lid prevents an excessive build up of steam from lifting the lid.

Upload: vanmien

Post on 01-Jul-2018

242 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PARTS WASHERS SJ-15 10 - AMB Tools WASHERS ® North America’s LARGESTManufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS SJ-15/10 Top-Load Automatic Aqueous Parts …

PARTS WASHERS

® North America’s LARGEST Manufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS

SJ-15/10Top-Load Automatic Aqueous Parts Washers

with a Water-Propelled Spray Bar

n Up to 18" Working Height n 1-Year Warranty

n Patented Spray WashTechnology EliminatesNeed for Drive Motor,Gears, Pulleys, etc.

n Momentary SafetySwitch automaticallyturns off pump when lid isopened to protect opera-tor from hot-water spray.

n SJ-15’s extra large, 90-Gallon Tank, nearlytwice the capacity of comparable parts wash-ers, keeps water hotter and cleaner longer.

n Metal Chip Trays, located directly belowthe basket, retain heat in the cleaning solu-tion and prevent stray parts and large metalshavings from falling into the tank. Withoutthe trays, wash water would have to bedrained to retrieve stray parts.

n A Brush Brake stops spraybar from spinning when lid isopened to protect operator fromhot-water splash.

n Low-Water Shutoff valve turns off the unitif the tank solution level drops too low thusprotecting both the heating element andpump from damage; optional AutomaticWater Fill replenishes the tank.

n Cabinet is made of 14-GaugeSteel and is protected by a two-step liquid polyurethane paintsimilar to what’s used in theautomotive industry.

n Stainless Steel Strainer filters debris andsolids to as small as 0.008 inches, extendingthe life of the cleaning solution. Strainer is easy to remove and clean for reuse.

n Carbon graphite RotaryUnion with non-corrosiveseals and hardened stain-less steel pin provides reli-able rotation of spray arm.

n High-efficiency calrod HeatingElement is protected in anincoloy sheath for long life;Adjustable Thermostat, 50-175°F.

n Tri-Lingual Operat-ing Instructions andWarning Labels pro-vide owner liabilityprotection.

REGISTERED®

Since 1969

s With up to 23 precision spraynozzles on the water-propelledspinning Spray Bar, parts are hitfrom every angle and are nevermore than 18 inchesfrom thespray nozzlecreating aSurround Cleaning effect.

Made in USA

n Automatic 1-hour Wash Timerallows for unattended operation plusprotects against operator neglect; 7-day programmable Heater Timersaves energy by turning off heaterwhen not in operationfor long periods.

n Automatic discOil Skimmerremoves excessfloating oils fromsolution tank.

www.landa.com

s Time-tested, 3 HPVertical Seal-less Pumpdelivers a water flow of upto 37 GPM with less main-tenance than pumps used inconventional parts washers.

NOW WITH

AUTOMATEDOIL SKIMMER

AS A STANDARD FEATURE

Shown withoptional casterwheels andside-mountedtool tray

n Two side-mounted GasStruts make it easy to lockopen and close the lid withonly one hand.

n Highly efficient Ventdesign in the lid prevents anexcessive build up of steamfrom lifting the lid.

Page 2: PARTS WASHERS SJ-15 10 - AMB Tools WASHERS ® North America’s LARGESTManufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS SJ-15/10 Top-Load Automatic Aqueous Parts …

PARTS WASHERS

® North America’s LARGEST Manufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS

SJ-15 / 10 Specifications

Basket Working Load Tank Pump Heating Dimensions ShippingPart No. GPM PSI Dimensions Height Capacity Capacity Electrical* Amps HP Element L x W x H Weight

SJ-15A 37 30 32" x 21" 18" 350 lbs. 90 gal. 230V 1ph 38 3 6 KW 48" x 53" x 49" 775 lbs.

SJ-15B 37 30 32" x 21" 18" 350 lbs. 90 gal. 230V 3ph 23 3 6 KW 48" x 53" x 49" 775 lbs.

SJ-15C 37 30 32" x 21" 18" 350 lbs. 90 gal. 460V 3ph 11 3 6 KW 48" x 53" x 49" 775 lbs.

SJ-10A 36 34 26" x 15" 15" 250 lbs. 69 gal. 230V 1ph 32 3 4.5 KW 42" x 47" x 46" 645 lbs.

SJ-10B 36 34 26" x 15" 15" 250 lbs. 69 gal. 230V 3ph 20 3 4.5 KW 42" x 47" x 46" 645 lbs.

SJ-10C 36 34 26" x 15" 15" 250 lbs. 69 gal. 460V 3ph 10 3 4.5 KW 42" x 47" x 46" 645 lbs.

*Models also available in both 208V 1 and 3ph configurations as well as stainless steel

Form #96-0202 • 1/04

Part No. DescriptionPK-100D Porta-Kleen for Processing Wastewater in SJ-15 and SJ-10200.616 Detail Brush with Pump (Factory installed)

200.162 Small Parts Basket (8"x8"x4")

200.605 Power Brush (Shop air required)

200.625 24-Hour Oil Skimmer Timer200.624 Tool Basket with tools200.626 Auto Water Fill200.263 Service Tray

OPTIONS: (SEE YOUR LANDA DEALER FOR A COMPLETE LIST OF OPTIONS)

WHY CHOOSE LANDA’s TOP-LOAD MODELSFor nearly a decade Landa has been putting a unique spin on automatic parts washing.

For example, in the mid-1990s, Landa patented a faster, moreeffective and more economical way to clean parts using a water-propelled spray arm that spins around a stationary parts basket.

LOW MAINTENANCE: Because the spray arm is pro-pelled by water, there is no need for a drive motor,gears, pulleys and other components that can createmaintenance headaches. Also its vertical seal-lesspump offers a low-maintenance solution.

CLEANS BETTER: The spray arm spins around the partsat a rate of up to 200 RPM delivering a constant blast to theparts. The precision spray nozzles (as many as 23 nozzles

on the SJ-15) are ideally positioned to blast parts fromall directions—all from less than 18 inches away—creating a virtual vortex of focused cleaning power.

AUTOMATED: A one-hour timer allows workers to leave thecleaning and return to their work. Plus, a seven-day timer ensures the water is hot

when it’s needed and saves energy when not in use.

Distributed by:

www.landa.com

Since 1969

U.S. Patents: No. D384446 & No. 6,109,277

SJ-15/10Top-Load Automatic Aqueous Parts Washers

with a Water-Propelled Spray Bar

n Up to 18" Working Height

n 1-Year Warrantyn Patented Spray Wash

Technology EliminatesNeed for Drive Motor,Gears, Pulleys, etc.

FOR BESTRESULTS USE

LANDADETERGENTS

ONLY

PARTS WASHERS

®