engineering workshop ( temperature meter)
TRANSCRIPT
GOVERNMENT ENGINEERING
COLLEGE BHAVNAGAR
Branch:-computerName:-Bhavika M. chavdaEn.no.:-140210107008Subject:- Electrical workshop
AIM :-
To set up a circuit for tempereture
meter.
COMPONENTS USED :-Equipments Specification
sQuantity
Resistor22 kΩ ( 1/8 watt)
10 kΩ ( 1/8 watt)
2
1
Temperature sensor
10 kΩ (NTC) 1
Galvanometer 1 mA (FSD) 1
Battery 3 V 1
Transistor 1BC-547 1
Flexible wires For connection purpose
½ meter approximately
PCB For connection purpose
1
CIRCUIT DIAGRAM :-
CIRCUIT DESCRIPTION :- Here, bridge circuit assembled as per
circuit diagram. Connect the transistor and meter as
shown into the figure. And the power supply given to the
circuit is 3-V DC.
CIRCUIT WORK :- As the temperature at the sensor
increases the resistance of the sensor decreases (NTC).
Hence, the current flow through the sensor increases and the amplifier transistor will get the forward bias.
So, the transistor will flow β times more current from collector that will lead the galvanometer to deflect.
OUTPUT :-
“As the temperature increases or decreases the deflect of the meter increases or decreases respectively ….”
TOTAL COST :-
Approximately 200 /-
Thank you..