engineering products sl. no. export item ... - eepc india · 2 galvanized high carbon steel wire...

C1

ENGINEERING PRODUCTSSl. No. Export Item Quantity Import Item Qty. Allowed C1 All Aluminium

Conductor (Bare) 1 MT 1 Aluminium Wire Rod

OR Aluminium Ingot / Billets

1.01 MT 1.04 MT.

1 Aluminium Alloy Billets OR 1.a) Aluminium Ingots/ T Bars/Sows OR a) Aluminium Scrap

1.01 kg. 1.02 kg 1.04 kg

b) Copper Scrap 1.05 kg

c) Silicon 1.05 kg

d) Zinc Scrap 1.05 kg

e) Manganese 1.05 kg

f) Any other Metal - X 1.05 kg

2 Powder for Coating 0.02 kg/kg content in export product

C2 Aluminium Alloy extruded Products including Rods and Bars

1 kg

3 Tool & Die Steel 4% of FOB Value

Note: 1 The quantity allowed above is per kg. net content of the material in the export product. The actual composition should be furnished by the applicant. Note: 2. In case, the item of export is Anodised, an additional item " Stannous Sulphate" @ 1.04 kg/kg net content of the material in the export product will be allowed. Note: 3. Powder for coating shall be allowed only if export product is powder coated.

1 kg 1 Aluminium Scrap OR Aluminium Ingot

1.03 kg 1.01 kg

2 Copper Scrap 1.05 kg

3 Silicon 1.05 kg

4 Zinc scrap 1.05 kg

5 Manganese 1.05 kg

6 Any other metal - X 1.05 kg

C3 Aluminium Alloy Ingots.

7 Magnesium 1.05 kg

Note: 1 The Quantity allowed above is per kg net content of the material in the export product. The actual composition should be furnished by the applicant.

C4 Aluminium artware 1 kg 1 Aluminium Scrap 1.075 kg

C5 Aluminium Circles/Slugs 1 kg 1 Aluminium Ingots with minium Purity of 99.5% OR Aluminium Scrap

1.10 kg OR 1.13 kg

C6 Aluminium Collapsible Tubes with or without Plastic Cap

1 kg 1 Aluminium Slug 1.050 kg

1 km 1 Aluminium Wire Rod OR Aluminium Ingot / Billets

1.01 kg/kg content in the export product 1.04 kg/kg content in the export product

2 a) High Carbon Steel Wire/Rod 1.02 kg/kg content in the export product

C7 Aluminium Conductor Steel Reinforced (ACSR)

b) Zinc 4% of weight of Steel

C2

OR content 2 Galvanized High Carbon Steel

Wire 1.02 kg/kg content in the export product

Note:1. The export product will indicate the weight of different items per kilometer.Note : The above item at Sl. No. 4 is allowed as an alternate item to item No. 2 & 3.

1 km 1 Aluminium rods (EC Grade) or Aluminum Ingots

140.56 kgs

2 XLPE Compound 31.08 kgs

C8 Aluminium Conductor XLPE Insulated, GI/Copper Wire Armoured, PVC Sheathed Cable for 600/1000 Volts - 2 x 25 sq. mm

3 PVC Resin 133.00 kgs

C9 Aluminium Conduit Bodies made of Aluminium and other alloying constituents

1 kg 1 Aluminium Ingot 1.030 kg/kg content in export

C10 Aluminium Extrusions/ Aluminium Profiles

1 MT 1 Aluminium Scrap 1.05 MT

C11 Aluminium Flexible Tubing

1 kg 1 Aluminium Ingots 1.05 kg

1 kg 1 a) Aluminium foil stock temper soft or hard in coils or reels

0.850 kg

b) Polyester, copolymer & polythylene food grade granules

0.3195 kg

c) Solvent soluble Dyestuff 0.0023 kg

d) Synthetic Resin 0.0089 kg

C12 Aluminium Foil commercial grade embosed/non embosed , cut to shape, performed , with /without coating with/without printing, with/without reinforcing material e) Adhesives OR Aluminium foil

Reel/Coils 0.0045 kg OR 1.15Kg.

Import item No. 1 (c) shall be permitted only when export producted is printed.Import item Nos. 1(b), 1(d) & 1(c) shall be allowed only when export product is with reinforcing material.

1 Kg 1 Aluminium Foilstock OR

1.10 Kg/Kg of Aluminium content in export.

1 Aluminium Ingot 1.20 Kg/Kg of Aluminium content in export

C13 Aluminium Foil paper backed

2 Relevant paper 1.05 Kg/Kg of paper content in export.


0.9995 Kg

1 Aluminium Ingot 1.07 Kg

2 Polyester Co-polymer 0.17 Kg

3 Synthetic Resin 0.0089 Kg

C14 Aluminium Foil plastic coated/ laminated

4 Adhesives 0.0045 Kg


1.10 Kg


C15 Aluminium Foil printed

2 Dyestuff 0.0023 Kg


1.075 Kg C16 Aluminium Foil- Synthetic Resin/ Lacquer


C3

2 Resin 0.086 Kg coated printed

3 Dyestuff 0.0105 Kg

1 Kg 1 Aluminium Foil Stock OR

1.075 Kg C17 Aluminium Foil- Synthetic Resin/Lacquer coated 1 Aluminium Ingot 1.102 Kg


1.10 Kgs C18 Aluminium Foil plain


C19 Aluminium Helical-formed fittings

1 kg 1 Aluminium Ingot OR Aluminium Scrap

1.05 kgs. 1.10 kgs.

1 No. 1 Aluminium Ingot OR

1.042 Kg/Kg weight of Aluminium content in the export product

1 Aluminium Scrap 1.06 Kg/Kg wt. of Aluminium content in export product

2 Steel blades for pencil sharpner OR

Net to Net

2 High Carbon Steel Strips 1.10 Kg/Kg wt. of Steel content in export product

C20 Aluminium Pencil Sharpner

3 Brass Scrap 1.075 Kg/Kg of the brass content in the export product

C21 Aluminium rivets 1 kg. 1 Aluminium wire 1.000 kg

1 kg 1 Aluminium Scrap 1.22 Kg/Kg content of Aluminium in export product.

2 Aluminium Ingot 1.18 Kg/Kg content of Aluminium in export product.

3 Aluminium Sheet/Coils 1.15 Kg/Kg content of Aluminium in export product.

C22 Table, Kitchen and other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at Sl.No. C-1749) 4 Aluminium Circle 1.07 Kg/Kg content

of Aluminium in export product.

1 kg 1 Aluminium Scrap OR

1.15 kg/Kg content of Aluminium in the export product.

1 Aluminium Ingots 1.10 kg/Kg content of Aluminium in the export product.

2 PTFE Non-Stick coating material 0.128 Ltr/Sq. Mtr of internal coating area

3 High Temp. Resistance Coating material as Silicon and/or PTFE Base

0.128 Ltr/Sq. Mtr of external coating area

C23 Aluminium Utensils with Interior PTFE Coating & Exterior Coating Material as Silicon and or PTFE base (Non stick) with/without handle.

4 Bakelite Moulding Powder 1.05 kg/kg content in export product

Note : 1. Item No. 4 to be allowed only if exported with handle. 2. Item No. 3 will be allowed only if the export product is painted.

C24 Aluminium Wire Rod 1 kg 1 Aluminium Ingot in the form of Pigs/Sows/Slabs

1.03 kgs.

C25 Cable Needle 1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in

C4

(Aluminium) the export product.

C26 Crochet Hook (Aluminium)

1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in the export product.

C27 Aluminium/Aluminium Alloy Cast Articles Including Parts & Components

1 kg 1 Aluminium scrap OR Aluminium Ingot

1.10 kg/kg of Aluminium content in the export product 1.06 kg/kg of Aluminium content in the export product

1 kg 1 Primary Aluminium in the form of pigs/Sows/Slabs/T-Bars OR

0.80 kg C28 Re-Rollable Aluminium Strips/Coils

1 Aluminium Scrap 0.25 kg

C29 Rolled Aluminium Plates, Sheets, Strips including Corrugated aluminium sheets/ strips

1 kg 1 Aluminium Scrap OR Primary Aluminium Ingots in the form of Pigs/Sows/Slabs/T-Bars.

1.045 kg 1.02 kg

C30 Stitch holders (Aluminium)


C31 B.B. Cup set of 3 (Weight 100 gms)

1 set 1 HR Sheet/ coils (seconds/defective)

195 gms

C32 Ball Racer cone 1 kg of Content of Import Item

1 HR Sheets /Coil 1.60 kg

C33 Ball Racer set of 3 (Weight: 42 gms for item 1 )

1 set 1 HR Sheet/Coil (seconds/defective)

75 gms

C34 BB axle (Weight 235 gms) 1 Piece 1 M.S./ Non-alloy steel round/ rods 282 gms

C35 BB Cup(Set of 2) (Weight: 82 gms for item 1 )

1 set 1 CRCA/HR Sheets/Coils (Seconds/defective)

159 gms

C36 BB Ring (Weight: 18 gms for item 1 )

1 piece 1 HR Sheet/Coil (seconds/defective)

35 gms

C37 BB set of 7 for one piece crank (Weight 216 gms)

1 set 1 CRCA/ HR/ Sheet/ coils (seconds/defective)

421 gms

C38 BB set of 9 for one piece crank (Weight 292 gms)

1 set 1 CRCA/ HR/ Sheet/ coils (seconds/defective)

569 gms

C39 BB Shell (Weight: 247 gms for item 1 )

1 piece 1 CRCA/HR Sheet/Coil (seconds/defective)

331 gms


214 gms C40 Bicycle Bell (Weight: 178 gms for item 1, 16 gms for item 2 ) 2 MS Rounds/Rod 19 gms


44 gms

2 MS Rounds/Rod 60 gms

C41 Bicycle Mirror (Weight: 34 gms for item 1, 57 gms for item 2, 66 gms for item 3 ) 3 Plastic/Polystrene 69 gms


1317 gms C42 Bicycle Stand (Weight: 1013 gms for item 1, 76 gms for item 2 ) 2 MS Rounds/Rod 82 gms

C43 Bicyle Side Stand 1 piece 1 CRCA/HR Sheet/Coil 305 gms

C5

(seconds/defective) (Weight: 231 gms for item 1, 242 gms for item 2 )


1 set 1 CRCA/HR Sheet/coils (seconds/defective)

771 gms

2 M.S. Round/ rod 65 gms

3 a) Carbon Black 18 gms

C44 Brake set (Weight: 539 gms for item 1, 59 gms for item 2, 70 gms for item 3)

b) Synthetic Butyl Rubber 42 gms

1 pair 1 CRCA/HR Sheet/Coil (seconds/defective)

31 gms


C45 Brake Shoe (Set of 2) (Weight: 22 gms for item 1, 4 gms for item 2, 35 gms for item 3) 3 Carbon black/natural/ Synthetic

rubber 36 gms

1 set 1 CRCA/HR Sheet/Coil (Seconds/Defective)

182 gms C46 Brake Stirrup (Weight: 148 gms for item 1, 12 gms for item 2 ) 2 MS Rounds/Rod 13 gms

1 set 1 CRCA/HR Sheet/Coil (seconds/defective)

54 gms C47 Brake Tube (Weight: 46 gms for item 1, 10 gms for item 2 ) 2 MS Rounds/Rod 11 gms

C48 Bridge Clip for mudguard (Weight: 19 gms for item 1 )

1 piece 1 CRCA/HR Sheet/Coil (Seconds/defective)

24 gms

1 Set 1 CRCA/HR Sheet/Coil (seconds/defective)

1004 gms.

2 MS/Non-alloy Steel Rounds/Rod 370 gms.

3 Polypropylene 67 gms.

C49 Caliper Brake set (Weight: 523 gms for item 1, 308 gms for item 2, 64 gms for item 3 and 44 gms for item 4)

4 Carbon black/natural/Synthetic rubber

45 gms.


1500 gms C50 Carrier (Weight: 1136 gms for item 1, 53 gms for item 2 ) 2 MS Rounds/Rod 55 gms


7 gms C51 Chain Adjuster (Weight: 6 gms for item 1, 21 gms for item 2) 2 MS Rounds/Rod 23 gms

C52 Chain Guard(Steel) (Weight: 90 gms for item 1 )


149 gms

C53 Chain Stay (Weight: 350 gms for item 1 )


382 gms


444 gms C54 Chain(110 Links) (Weight: 334 gms for item 1, 81 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 95 gms

Note : 1. In case of chains exported with lesser or higher links than 110 links, weight of export/import items to be reduced/increased proportionately.


686 gms.

2 MS/Non-alloy Steel Rounds/Rod 1061 gms

C55 Chainwheel & Crank (Weight: 352 gms for item 1, 722 gms for item 2, 73 gms for item 3) 3 When cranks are plastic coated

:Polypropylene 77 gms

C56 Chainwheel (Weight: 352 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective)

686 gms

C6

gms for item 1 )

1 No. 1 HR/CRCA Sections/ defective/sheets/ plates/coils/ strips

13.5 kgs

2 MS Rounds/Non Alloy Steel Rounds/bars/ wire rods

3.69 kgs

3 Brass scrap 0.34 kg

4 Unwrought Zinc for galvanising & plating

0.04 kg

5 Nickel Cathodes / Ingots / Pellets 0.072 kg

6 Synthetic butyl rubber for rubber parts

0.06 kg

7 Polypropylene/ Polystyrene/ PVC compound for components OR 7.a)Polyol b)Isocynate

0.40 kg 0.100 kg 0.066 kg

8 Other inputs for tyres and tubes OR Tyre & Tube (in pair)

As indicated in the detailed list of norms.

9 Components: (i)Any component from the component list when imported will be allowed on net to net basis. However, entitlement of raw materials used for manufacture of the components will be deducted from thecumulative list of raw materials indicated as above.(ii)Any combination of the following components on net to net basis for bicycles with special features.

Net to net

a) Deraillers system

b) Coaster Hub Brake

c) Dynamo with head and/ or tail light

d) Reflectors

e) Decals

C57 Complete Bicycle without accessories and with Tyres and Tubes-22" and 24" Frame (Net weight 17 kg)

f) One piece crank

Note: 1. Entitlement of inputs for complete bicycle having lower weight will be worked out on prorata basis. Normally, bicycle having weights above 17 kg are not exported. However if weight of Bycycle exceeds by 10% i.e. upto 18.70 kg the same may also be considered by the RLA on pro-rata basis.2. If the bicycle is exported with moulded P.U. Saddle, the import of Polyol & isocynate to the extent of 100 gms and 66 gms respectively per Saddle shall be permitted. Correspondingly, the quantity of the input at Sl.No. 7 viz. PVC Compound/ Polypropylene/ Polystyrene shall be reduced by 158 gms. The description of resultant product shall be accordingly amended to read as "Bicycle with P.U. Saddle".


4 gms C58 Cotter Pin - Set of 2 (Weight: 3 gms for item 1, 40 gms for item 2) 2 MS Rounds/Rod 44 gms


245 gms C59 Derailleur(Front) (Weight: 117 gms for item 1, 26 gms for item 2) 2 MS Rounds/Rod 38 gms

C60 Derailleur(Rear) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective)

621 gms

C7

(Weight: 296 gms for item 1, 65 gms for item 2)


1 set 1 CRCA/HR Sheet/Coil (Seconds/defective)

1262 gms


C61 Double Chain wheel & Crank (Weight:675 gms for item 1, 710 gms for item 2, 73 gms for item 3) 3 When cranks are plastic coated:

Polypropylene 77 gms


8 gms C62 Expander Bolt (Weight: 7 gms for item 1, 88 gms for item 2 ) 2 MS Rounds/Rod 123 gms

C63 Fork (Weight: 1061 gms ) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective)

1263 gms

C64 Fork Crown Cover (Weight: 16 gms for item 1 )


21 gms

1 Set 1 CRCA/HR Sheets/Coils (seconds/defective)

259 gms C65 Fork Fitting (Weight: 108 gms for item 1, 20 gms for item 2) 2 MS Rounds/Rod 44 gms


89 gms C66 Fork Guard (Pair) (Weight: 77 gms for item 1, 652 gms for item 2 ) 2 MS Rounds/Rod 717 gms

C67 Fork Guard Clamp (Weight: 77 gms for item 1 )


89 gms

C68 Frame (Weight: 3000 gms )

1 Set 1 CRCA/HR Sheet/Coil (Seconds/defective)

3450 gms

C69 Frame Cup Set of 2 (Weight: 39 gms for item 1 )


47 gms

1 piece 1 CRCA/HR Sheet/Coil (Seconds/defective)

185 gms C70 Frame Lock (Weight: 143 gms for item 1, 57 gms for item 2 ) 2 MS Rounds/Rod 63 gms

C71 Frame Lugs Set of 3 (Weight: 212 gms for item 1 )


262 gms

C72 Frame Pipe Set of 4 (Weight: 1398 gms for item 1 )


1482 gms

C73 Frame Top Bar Pipe (Weight: 310 gms for item 1 )


332 gms

1 piece 1 CRCA/HR Sheets/Coils (seconds/defective)

259 gms C74 Free Wheel (single speed) (Weight: 108 gms for item 1, 99 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 160 gms

C75 Front/ Back Mudguard 1 kg 1 M.S. CRCA sheet/ coil/ strip including seconds/ defectives but excluding coated

1.10 kg


1108 gms C76 Full Chain Cover (Weight: 924 gms for item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms

C77 Half Chain Cover 1 piece 1 CRCA/HR Sheet/Coil 641 gms

C8

(seconds/defective) (Weight: 501 gms for item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms


1156 gms


C78 Handle Bar (Weight: 869 gms for item 1, 594 gms for item 2, 40 gms for item 3) 3 Polystyrene/PVC 42 gms

C79 Handle Lever(pair) (Weight: 328 gms for item 1 )

1 pair 1 MS Rounds/Rod 344 gms


341 gms C80 Handle Stem (Weight: 278 gms for item 1, 88 gms for item 2 ) 2 MS Rounds/Rod 100 gms

C81 Hub Axle(Front) (Weight: 85 gms for item 1 )

1 piece 1 MS/Non-alloy Steel Rounds/Rod 102 gms

C82 Hub Axle(Rear) (Weight: 126 gms for item 1 )


C83 Hub Cone( Rear) (Weight: 16 gms for item 1 )

1 pair 1 MS/Non-alloy Steel Rounds/Rod 22 gms

C84 Hub Cone(Front) (Weight: 12 gms for item 1 )

1 pair 1 MS/Non-alloy Steel Rounds/Rod 16 gms

C85 Hub Cup ( Rear) (Weight: 28 gms for item 1 )


39 gms

C86 Hub Cup (Front) (Weight: 20 gms for item 1 )


28 gms

1 Piece 1 CRCA/HR Sheet/Coil (seconds/defective)

114 gms C87 Hub(Front) (Weight: 88 gms for item 1, 85 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 120 gms


297 gms C88 Hub(Rear) (Weight: 229 gms for item 1, 126 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 293 gms

C89 Lamp Bracket (Weight: 67 gms for item 1 )


96 gms


1026 gms C90 Mudguard(pair) (Weight: 933 gms for item 1, 246 gms for item 2) 2 MS Rounds/Rod 258 gms


913 gms C91 Multispeed Free Wheel (Weight: 397 gms for item 1, 119 gms for item 2)


C92 One Piece Crank (Weight: 860 gms for item 1 )


1 Pair 1 Non Alloy Steel Bar/Round for Axle

350 gms C93 Paddle Pair made out of Polypropylene (Net weight 450 gms per pair) 2 MS Defective Sheet/Coil for 31.5 gms

C9

Washer

3 Polypropylene 98 gms

4 Acrylic Reflectors 4 Nos./Padle Pair weighing 19 gms

Note : 1. In case the net weight of the PP Bicycle Paddle is varying, the inputs will be worked out on pro-rata basis.


3 gms C94 Pedal Axle (Weight: 2 gms for item 1, 88 gms for item 2 ) 2 MS/Non-alloy Steel Rounds/Rod 107 gms

C95 Pedal Cone (Weight: 4 gms for item 1 )


C96 Pedal Cup (Pair) (Weight: 20 gms for item 1 )


23 gms

C97 Pedal Plate (2 pieces) (Weight: 26 gms for item 1 )


30 gms

C98 Pedal Stretcher Bar (2 pieces) (Weight: 27 gms for item 1 )

1 set 1 MS Rounds/Rod 28 gms

C99 Pedal Tube (Weight: 17 gms for item 1 )


18 gms


214 gms


C100 Pedal(pair) (Weight: 165 gms for item 1, 274 gms for item 2, 290 gms for item 3) 3 Carbon black/ natural/Synthetic

rubber 295 gms

C101 Plastic Chain guard (Weight: 29 gms for item 1 )

1 piece 1 Polypropylene 30 gms


279 gms C102 Pump (Weight: 254 gms for item 1, 12 gms for item 2 ) 2 MS Rounds/Rod 13 gms


315 gms C103 Quarter Chain Cover (Weight: 284 gms for item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms

C104 Rim(pair) (Weight: 2233 gms for item 1 )


2568 gms


456 gms


3 PVC Compound OR 3.(a) Polyol (b) Isocyanate

158 gms 100 gms 66 gms

1 a) Panel 112 Nos

C105 Saddle (Weight: 400 gms for item 1, 841 gms for item 2, 150 gms for item 3)

b) Funnel 112 Nos

Note: If the export product is of moulded P.U. Saddle, the import of Polyol and Isocyanate as indicated shall be permitted instead of P.V.C. compound

C106 Saddle Nose (Weight: 30 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective)

37 gms

C10

gms for item 1 )

C107 Saddle Strip (Weight: 236 gms for item 1 )


260 gms

C108 Saddle Wire set of 3 (Weight: 199 gms for item 1 )


C109 Screw Racer (Weight: 27 gms for item 1 )


48 gms

C110 Seat Axle (Weight: 39 gms for item 1 )

1 piece 1 MS Rounds/Rod 43 gms

C111 Seat Clip (Weight: 142 gms for item 1 )


156 gms

C112 Seat Pillar(5") (Weight: 83 gms for item 1 )


89 gms

C113 Seat Plate (Weight: 145 gms for item 1 )


197 gms

C114 Seat Rivet (11 pieces) (Weight: 15 gms for item 1 )


C115 Seat Stay (Weight: 171 gms for item 1 )


186 gms

C116 Spanner 13 Hole (Weight: 80 gms for item 1 )


158 gms

C117 Spanner Set of 3 pieces (Weight: 100 gms for item 1 )


167 gms

1 piece 1 MS/Non-alloy Steel Rounds/Rod 531 gms C118 Spare Crank (Weight: 361 gms for item 1, 73 gms for item 2 )

2 When Cranks are Plastic Coated:Polypropylene

77 gms


43 gms


C119 Spokes Set of 72 pieces (Weight: 31 gms for item 1, 611 gms for item 2, 105 gms for item 3) 3 Brass 113 gms

C120 Steel Balls (Set for complete bicycle) (Weight: 56 gms for item 1 )

1 Set 1 MS/Non-alloy Steel Rounds/Rod 69 gms


440 gms C121 Steel Pedal(pair) (Weight: 308 gms for item 1, 200 gms for item 2 )



1428 gms


C122 Triple Chain wheel & Crank set (Weight: 764 gms for item 1, 760 gms for item 2, 73 gms for item 3)

3 When cranks are plastic coated: Polypropylene

77 gms

Note:1. Entitlement of inputs will be calculated on the basis of net weight of different inputs in the export product. Ratio of inputs will be as per above standard input output norms. 2. In case of bicycle productsto be Nickel Plated, the Nickel will be allowed at the rate of 1% of the net

C11

weight of the steel to be Nickel Plated. 3. Zinc will be allowed at the rate of 3% of the net weight of the parts to be galvanised. 4. Paints, preparationchemicals and thinner will be allowed at the rate of 1.08% of the net weight of the parts to be painted. 5. Plating salts will be allowed at the rate of 2% of the net weight of the parts to be plated. 6. Packing Material will be allowed as per the packing policy. 7. However if weight of Bicycle components exceeds by 10%, the same may also be considered by RLA on pro-rata basis. This note is applicable to SIONs at Sr. Nos. C-31 to C-56, C-58 to C-92 and C-94 to C-122 8. In all the above export products, the net weight of different items as per the above standard norms shall be indicated alongwith the export obligation to be imposed.

1 No. 1 Hot melt adhesive 375 gms

2 Electrolytic grade copper 99.9% purity in Rod/Tube form

725 gms

3 Self amalgamating EPR Insulating Tape

6 mtrs

4 Heat Shrinkable Medium Wall tubing size 140/42 mm

255 mm

5 Anti Tracking Heat Shrinkable whether insulation tubing size 42/19 mm

1.9 mtr

6 Heat Shrinkable Stress control tubing size 45/20 mm

800 mm

7 Heat Shrinkable (small Size) Anti tracking wheather resistant tubing size 95/45 mm

1 Mtr.

C123 11 KV Heat Shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm. sq.

8 Anti tracking wheathering resistance 3 - way breakout/ trifurcating gloves for HV Termination (Large size ) HS

1 No.

1 No 1 Hot Melt Adhesive 370 gms


600 gms.

3 Self Amalgamating EPR Insulating tape

6 Mtrs.

4 Heat Shrinkable medium wall tubing size 115/34 mm

250 mm

5 Heat Shrinkable anti tracking insulating tubing size 42/19 mm

1.7 Mtrs.

6 Anti Tracking Weathering resistance 3 way breakout trifurcating gloves for HV terminations

1 No.

7 Heat Shrinkable Stress control tubing size 20/45

800 mm

C124 11 KV Heat Shrinkable Dry Type Indoor Termination for Switchgear with in line Boot for XLPE Cable 185sq mm.

8 Heat Shrinkable Conduting Tubing size 24/65 mm

600 mm


2 Electrolytic grade copper 99.9 purity in Rod/ tube form

850 gms

3 Self Amalgamating EPR Insulating Tape

6 Mtrs

4 Anti-Tracking Heat shrinkable Anti-tracking Insulating Tubing size 42/19 mm

3 Mtrs

C125 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq.

5 Heat Shrinkable stress control Tubing size 45/20 mm.

800 mm

C12

1 No 1 Hot Melt Adhesive 500 mm

2 Electrolytic Grade copper 99.9 purity in Rod/Tube form

870 mm


4 mtrs.

4 Anti Tracking Wethering 3 way breakout / trifurcating Gloves for HV Terminations (Large size) HS

1 No

5 Heat shrinkable medium wall tubing size 95/25 mm

255 mm

6 Heat shrinkable Anti-tracking Insulating Tubing 32/14 mm

3 mtrs.

C126 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq.

7 Heat shrinkable stress control tubing size 15/30 mm

800 mm

1 No. 1 Heat Shrinkable Breakout 2 Nos

2 Heat Shrinkable Stress control Tubing

3 Mtrs

3 Mastic Compound Tape (Anti Tracking)

1.320 kgs

4 Spacer Tape 4.0 Mtrs.

5 Stress Control Mastic Tape 4.8 Mtrs.

6 Heat Shrinkable Thin Wall Tubing

3.20 Mtrs

7 Heat Shrinkable Medium Wall Tubing

1.80 Mtrs.

8 Heat Shrinkable Conducting Tubing

3.0 Mtrs.

C127 11 KV Heat Shrinkable Straight through joints suitable for 3 x 185 - 240 sq. mm

9 Heat Shrinkable Anti Tracking Tubing

3.28 Mtrs.

1 No 1 Hot melt adhesive 500 gms

2 Electroiytic grade copper 99.9 purity in Rod/Tube form

900 gms

3 Self Amolgamating EPR Insulating tape

10 mtr

4 Heat shrinkable medium wall tubing size 140/42mm

1995 mm.

5 Heat shrinkable Stress cantrol tubing size 20/45 mm

3 Mtr

6 Heat Shrinkable conducting tubing 95/45 mm

3 Mtr

C128 11 KV Heat Shrinkable Straight Through Joints for XLPE Copper Cable size 3 x 240 sq. mm.

7 Heat Shrinkable Anti tracking Insulation tubing size 42/19 mm

3 Mtr

1 No. 1 Heat Shrinkable Breakout 2 Nos.

2 Heat Shrinkable Stress Control Tubing

2.60 Mtrs.

3 Mastic Compound Tape (Anti Tracking)

1.450 kgs

4 Spacer Tape 4.0 Mtrs.

5 Stress Control Mastic Tape 3.83 Mtrs.

6 Heat Shrinkable Thin Wall Tubing

3.23 Mtrs.

C129 11 KV Heat Shrinkable Transition joints suitable for connecting 240 sq.mm XLPE to 300 sq.mm PILC cable & 185 sq.mm XLPE cable with 300 sq.mm PILC Cables

7 Heat Shrinkable Medium Wall Tubing

1.75 Mtrs.

C13

8 Heat Shrinkable Conducting Tubing

3.21 Mtrs.


3.0 Mtrs.

1000 Mtrs. 1 EC Grade Aluminium Bars/Rods/Ingots.

2024.00 kgs.

2 Cable insulating paper 731.04 kgs.

3 Cable impregnating compound 551.17 kgs.

C130 11 KV mass impregnated, paper insulated, lead alloy sheathed steel tape armoured Aluminium conductor conforming to IS:692/73 240 sq.mm 3 Core

4 Lead 4270.86 kgs.


1012.00 kgs.

2 Cable Insulating Paper 525.20 kgs.

3 Cable impregnating compound 423.24 kgs.

C131 11 KV mass impregnated, paper insulated, lead Alloy sheathed steel tape armoured Aluminium conductor conforming to IS:692/73 120 sq.mm 3Core

4 Lead 2947 kgs.


2 Electrolytic Grade copper 99.9% purity in Rod/Tube form

860 gms

3 Self amalgamating EPR insulating Tape

10 mtrs

4 Heat shrinkable medium wall tubing size 115/34

1995 mm

5 Heat shrinkable stress control tubing size 20/45 mm

3 mtrs

6 Heat shrinkable stress control tubing 15/30 mm

3 mtrs

7 Heat shrinkable Anti-Tracking weathering Insulating Tubing size 42/19 mm

2.25 mtrs

C132 11 KV Straight Through Joints for XLPE Copper Cable size 3 x 95 Sq. mm.

8 Heat shrinkable contucting tubing size 16/38 mm

2 mtrs

1 No. 1 Vaccum Interruptor 3 Nos.

2 Contact Strips and Rings 3 Nos.

3 Bearing HFL 2026 1 No.

4 Bearing HF 2016 1 No.

C133 11 KV, Indoor Vacuum circuit Breaker Panels

5 Bearing HK 2010 1 No.

C134 Deleted


3373.34 kgs.

2 XLPE Compound (Semi-Conducting and Insulating Grade)

3642.73 kgs.

3 PVC Resin 3771.43 kgs.

C135 19/33 KV 3 Core X 400 sq.mm.aluminium conductor XLPE insulated, steel wire armoured, PVC Sheathed cable conforming to IS: 7098/II/85 400 sq.mm.3 Core

4 Firrat Tape(semi-conducting swellable tape)

90.42 kgs.

C136 Deleted

1 No. (4.70 kgs Approx)

1 Epoxy Resin (Liquid) 0.797 kg C137 33 KV Insulator as per IS-9431

2 Hexa Hydro Phthalic Anhydride 0.637 kg

C14

(HHPA)(Haroner)

3 Benzyl Diethuamine 0.014 kg

4 Release Agent QZ-13 0.010 kg

1 No. 1 CRCA Sheet 2.5 kg.

2 Ballast 2 Nos.

3 Holders 4 Nos.

4 Capacitors 1 No.

C138 40 W Twin Tube Box Type Industrial Fitting duly Pre wired with Vaccum Pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders.

5 Starter 2 Nos.



760 gms


6 Mtrs


1 length of 1700 mm

C139 600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq.


1200 mm



630 gms


4 mtrs


1 length of 1700 mm



800 mm



850 gms


4 mtrs


1 length of 1500 mm


5 Heat Shrinkable tubing size 35/12 mm

750 mm



690 gms


4 mtrs


1 length of 1500 mm



600 mm

1 No 1 Hot melt adhesive 280 gms C143 600/1000 V Heat shrinkable straight joints 2 Electrolytic grade copper 99.9%

purity in Rod/Tube form 700 gms

C15


4 mtrs


1060 mm

for cable size 4 X 25 mm. sq.


500 mm

1 No 1 Hot melt adhesive 200 gms


550 gms


3 mtrs


1060 mm



750 mm



800 gms


8 mtrs.


3375 mm


300 mm

6 Heat Shrinkable stress control tubing size 20/45 mm

320 mm

C145 600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 240 mm. sq.

7 4-way cable breakout for LV Termination (Medium size)

1 No.



600 gms


6 mtrs.


3772.5 mm


210 mm

C146 600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 120 mm. sq.

6 Heat Shrinkable Stress control size 15/30 mm

320 mm



600 gms


6 mtrs


3772.5 mm


210 mm


320 mm

C147 600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 120 mm. sq.

7 4-way cable breakout for LV termination (Large size)

1 No

1 No. 1 Hot melt adhesive 300 gms C148 600/1000 V Outdoor Overhead termination 2 Electrolytic grade copper 99.9%

purity in Rod/Tube form 700 gms

C16


5 mtrs


3920 mm

5 Anti-tracking Heat Shrinkable Medium Wall tubing size 50/16 mm

210 mm


200 mm

complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 25 mm. sq.

7 Heat Shrinkable 4-way cable breakout for LV Termination (small size)

1 No

C149 Deleted

1 No 1 Duralumin Rods, Free Cutting Aluminium rods, Capillary Tubes

Net + 2% wastage

2 Copper Bars/ Strips Net + 2% wastage

3 Manganin Wire/ Rods Net + 2% wastage

C150 Accessories of Electrical Measuring Instrument: Shunts

4 Eureka Wire/ Rods Net + 2% wastage

1 No. 1 One or More of the following relevant synthetic resin :

a) Polyester 1.05 kg/kg of the net content of the relevant item in the export product.

b) Nylon 66

c) ABS

d) Polycarbonate 1.05Kg/Kg content in the export product.

2 Relevant Zinc Alloy Ingot 1.05 Kg/Kg content in the export product.

3 Brass Strip 1.33Kg/Kg content in the export product.

4 Relevant Diodes. Net to net.

5 Relevant Resistors Net to net.

6 Brass Rod 1.1 kg/kg content in the export product

C151 Electrical Actuators for Electrical Switches

7 Silver Epoxy and Epoxy Resin CIF value of these item together shall be restricted to 1% of FOB

C152 Adopters made of Brass Strip ( for electric lamps)

1 MT 1 Brass Strips of relevant gauge 1.10 MT/MT content in export

C153 All Aluminium Solid single Core Conductor to BS-2627H8 in coil form

1 MT 1 Aluminium Wire Rod/Ingot 1.01 MT

1 kg 1 Aluminium Wire Rod/Ingots 1.01 kg/kg content in export product

2 H.C. Steel Wire Rods 1.05 kg/kg content in export product

3 Zinc Unwroght Unalloyed 4% of steel content in export

C154 Aluminium Conductor #6 and #3 Duplex Phase - AC SR Neutral

4 XLPE Compound 1.05 kg/kg content in export product

C17

1 No. 1 CRGO Steel laminations/sheets/coil

0.29 kgs/KVA

2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes

0.16 kg/KVA

3 Transformer Oil OR

0.40 kgs/KVA

3 Transformer Oil Base Stock 0.44 kgs/KW

4 Phenolic Resin bonded paper 0.046 kgs/KVA

5 Pre Compressed Press Board 0.05 kg per KVA

6 Press Board Moulding 1 Set (Net to net)

C155 Auto Transformers above 100000 KVA, 3 Phase

7 Motorised Off Load/ on Load Tapchanger

1 No. (Net to net)


0.43 kgs/KVA


0.2 kg/KVA


0.42 kgs/KVA




6 Press Board Moulding 1 Set per Job

C156 Auto Transformers above 25000 KVA upto 63000 KVA, 1 Phase


1 No. per Job


0.47 kgs/KVA


0.23 kg/KVA


0.68 kgs/KVA







1 No. per Job


0.44 kgs/KVA


0.015 kg/KVA


0.35 kgs/KVA







1 No. (Net to net)


0.37 kgs/KVA C159 Auto Transformers above 63000 KVA upto 100000 KVA, 3 Phase 2 Copper winding wires/ strips/ 0.2 kg/KVA

C18

wire bars/ wire rods/ cathodes


0.55 kgs/KVA






1 No. (Net to net)

C160 Electrical Wiring Accesseries/components wholly made of Brass

1.0 kgs 1 Brass Scrap 1.075 kgs

1 Kg. 1 Zinc having minimum purity 99.95%

1.05 Kg per Kg. content in export product

C161 Brass Strips for Electrical/ Electronics/ Telecommunication/ Defence application and radiators for automobile application.

2 Copper wire bars having 99.9% minimum purity

1.05 Kg per Kg. content in export product

1 No. 1 Synthetic Resin (To be specified) 18.345 kgs

2 Isocynate/Poly Isocynate (Hardner)

6.115 kgs

3 Catalyst 0.247 kg

4 High Impact Polystyrene Granules

8.530 kgs

5 Ethylene Propylene Rubber (EPR insulating tape)

0.215 kg

6 Mastic Sealing Tape 0.205 kg

7 Thermofit Sleeve 0.880 Mtrs

C162 Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable

8 Copper wire/rod 2.980 kgs



11.430 kgs

3 Catalyst 0.462 kg


11.08 kgs


0.215 kg



C163 Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable




3.120 kgs

3 Catalyst 0.125 kg

4 High Impact Polystyrene 4.65 kgs


0.215 kgs


C164 Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable


C19

8 Copper wire/rod 0.370 kg



5.320 kgs

3 Catalyst 0.215 kg


5.600 kgs


0.215 kg



C165 Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable

8 Copper wire/rod 0.370 kg



1.22 kgs

3 Catalyst 0.048 kgs


2.110 kgs


0.215 kgs

6 Mastic Sealing Tape 0.205 kgs

7 Thermofit Sleeve 0.590 Mtrs.

C166 Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable


1 No. 1 Polypropylene 1.05 kg/kg content in export product.

2 High Impact Polystrene 1.05 kg/kg content in export product.

3 Lamination Steel (Electrical) 2 kg/kg content in export product.

4 Copper Wire/Bar/Rod 1.01 kg/kg content in export product.

C167 Ceiling Exhaust Fan or Ceiling Extraction Fan

5 Thermal Fuse Net to net.

1 No. 1 Super Enamelled Copper Wire/Copper Wire Rod

320 gm

2 CRNGO Sheet/Coils 3100 gm

3 Aluminium alloy 660 gm

4 Kraft Paper 800 gm

5 Polypropylene 130 gm

6 M.S. Sheet 200 gm

7 Ball bearing/ Bush 2 Nos

8 Capacitor Net to net.

C168 Complete Ceiling fan with or without Metal Blades(36")

9 Aluminium Sheet/CRCA Sheet (for Blades of Fan) (only the relevant item used in the export to be allowed)

1.05 kg/kg content in the export product.

1 No. 1 Super Enamelled Copper Wire/Copper Rod

360 gm C169 Complete Ceiling fan with or without Metal blades 48" 2 CRNGO Sheet/ Coils

OR Electric Stamping made out of CRNGO Sheet.

3400 gm OR 1400gms.

C20




6 M.S. Sheet 250 gm

7 Ball bearing/ Bush 2 Nos.

8 Aluminium Sheet/CRCA Sheet/Aluminium Alloy (for Blades of Fan) ( only the relevant item used in the export to be allowed).

1.05Kg/Kg content in the export product.

1 No. 1 Super Enamelled Copper Wire/Copper Wire Rod

320 gm

2 CRNGO Sheet/ Coils 3100 gm




6 M.S. Sheet 200 gm

C170 Complete Ceiling fan with or without Metal Blades(42")

7 Ball bearing/Bush 2 Nos.

1 No. 1 Super Enamelled Copper Wire/Copper Rod

380 gm

2 CRNGO Sheets/ Coils OR Electric Stamping made out of CRNGO Sheets

3600 gm OR 1500 gms.

3 Aluminium Alloy 1200 gm



6 M.S. Sheet 250 gm

7 Ball bearing/Bush 2 Nos.


9 Aluminium Sheet/CRCA Sheet/Aluminium Alloy (for Blades and False Cover of Fan) (Only the relevant item used in the export to be allowed) [to be permitted only in such cases where Blades/False Cover are also required to be exported alongwith export product]


10 Regulator [to be allowed only in such cases where the same is required to be exported alongwith the export product]

1 No.

11 MS/GI Pipe 1.02 Metre/Metre content in export product.

C171 Complete Ceiling fan (56") with or without Metal Blades and regulator

12 MS Bright Bar 1.05 kg/kg content in the export product.

Note: 1. Norms covered by Sl.No. 168 to 171 above will also be applicable to shipment of products in SKD condition provided the exporter submit necessary proof of export of complete ceiling fans covered by various shipping bills at the time of closure of DEEC Book/Redemption of Bond / LUT.

C172 Aluminium / Copper Conductor, XLPE

1 km 1 Copper Wire Bar/ CC Rod (EC Grade)

*

C21

OR

1 Aluminium Ingots *

2 XLPE Compound *

3 PVC Compound OR

*

3 a) PVC Resin 60% of PVC Compound allowed in Engg. Table No. 10

b) Plastisizer 30% of PVC Compound allowed in Engg. Table No. 10

Insulated, GI/Single Wire Armoured, PVC Sheathed Cable for 600/1000 Vof various sizes as given in Engg. Table No. 10

c) Filler 10% of PVC Compound allowed in Engg. Table No. 10

* Note: 1. The quantity of these items will be as per the Engineering Table No. 10 given at the end of this product group.

C173 Deleted

C174 Deleted

C175 Deleted

C176 CR/AL Thermo-couples 1 No. 1 Recrystalised Alumina Sheath Net to Net

1 No. 1 CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR

316.25 kgs

1 Nickel Iron Magnetic Strips/ Sheets/ Coils

302.50 kgs

2 Copper Winding Wires/ Strips/Wire Bars/ Wire Rods/ Cathodes

282.80 kgs

3 Electrical Grade Insulating Paper 165 kgs

4 Porcelain Insulator 1 No.

5 Mild Steel Sheets/ Coils OR

440 kgs

5 Aluminium Sheets/ Plates/ Ingots 157.50 kgs


472.50 Litres

C177 Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6)

6 Transformer Oil Base Stock 567 Litres


7.475 kgs


7.15 kgs

2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes

7.07 kgs

3 Electrical Grade Insulating Paper 0.22 kg

4 Mild Steel Steets/ Coils 3.30 kgs

C178 Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5)

5 Epoxy Resin 5.25 kgs

C179 Current Transformers 1 No. 1 CRGO Steel Laminations/ 10.35 kgs

C22

Sheets/ Coils with insulating coating of inorganic/ organic material OR


9.90 kgs

2 Copper winding Wires/ Strips/Wire Bars/Wire Rods/ Cathodes

9.09 kgs

3 Electrical Grade Insulating paper 0.33 kg

4 Mild Steel Sheets/ Coils 3.30 kgs

above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5)



195.50 kgs

1 Nickel Iron Magnetic Strips/Sheets/ Coils

187.0 kgs


146.45 kgs

3 Electrical Grade Insulating paper 110 kgs



297 kgs

5 Aluminium Sheets/ Plates/ Ingots 105 kgs


273 Litres

C180 Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6)

6 Transformer Oil Base Stock 327.60 Litres


13.80 kgs


13.20 kgs


12.12 kgs



C181 Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5)



51.75 kgs


49.50 kgs


32.32 kgs

3 Electrical Grade Indulating paper 8.25 kgs



C182 Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6)

6 Transformer Oil 63.0 Litres

C23

OR 6 Transformer Oil Base Stock 75.60 Litres


138 kgs


132 kgs


45.45 kgs

3 Electrical Grade Insulating paper 55.0 kgs



99 kgs

5 Aluminium Sheets/ Plates/ Ingots 47.25 kgs


194.25 Litres

C183 Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6)



1.15 kg

1 Nickel Iron Magnetic Strips/ Sheets/Coils

1.10 kg


1.01 kg


C184 Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4)

4 Epoxy Resin 1.05 kg


26.45 kgs


25.30 kgs


20.20 kgs

3 Electrical Grade Insulating paper 3.85 kgs




36.75 Litres

C185 Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6)


1 No. 1 High Impact Polysterene 1.05 kg/kg content in export product.

2 Copper Wire Rod OR Ennameled Copper Wire

1.02 kg/kg content in export product.

C186 Electric Door Bell

3 CRGO Sheet (Gauge 35 to 45) OR Aluminium Ingot


C187 (A) Electric Lamp Caps 1000 Pcs. 1 FOR EXPORT ITEM (A)

C24

Aluminium Strip OR Aluminium Ingot OR Aluminium Scrap 2. Brass strip OR Brass Cathode/Rod

2.916Kgs OR 2.974Kg OR 3.047Kgs. 0.224 kgs OR 0.233 kgs

2 FOR EXPORT ITEM (B) 1. Aluminium Strip OR Aluminium Ingots 2. Brass Pin

2.55 Kgs OR 2.601 Kgs 2020 Nos

(Aluminium)/GLS Caps B22D & E 27/27 (B)FTL Caps (G-13/35mm) (C) FTL Caps (G-13/24mm or 24.5mm)

3 FOR EXPORT ITEM ( C) 1. Aluminium Strip OR Aluminium Ingots. OR Aluminium Scrap OR 2. Brass Pin

1.65 Kgs OR 1.683 Kgs. OR 1.724 Kgs OR 2020 Nos

1 No. 1 Motor Assembly alongwith Osc. Mech., Cable, Thermostate & Condensor OR The following raw materials for the above item:-

1 No.

a) Super Enamelled Copper Wire/ Copper Wire Rod

1.01 kg/kg content in export product

b) Electrical Steel Sheet 1.10 kg/kg content in export product

c) Bright Carbon Steel Rod 1.10 kg/kg content in export product

d) Pig Iron 1.10 kg/kg content in export product

e) Cold Rolled Sheet 1.10 kg/kg content in export product

f) Aluminium Alloy 1.05 kg/kg content in export product

g) Bush/Ball Bearing 1 No.

h) Thermostate 1 No.

2 A.B.S. Granules 1.05 kg/kg content in export product

3 Switch OR

1 No.

3 a) Phenol Formaldehyde Resin 1.05 kg/kg content in export product.

b) Brass Sheet 1.05 kg/kg content in export product.

c) Polystyrene 1.05 kg/kg content in export product.

4 Thermonal Block 1 No.

5 Polypropylene 1.05 kg/kg content in export product

6 Cable/Cord with Plug OR

1 No.

a) Plug 1 No.

C188 Electric Padestal Fan

b) Cord/Cable 1.02 Mtr/Mtr content in export product

C25

7 Capacitors 1 No.

8 Steel Tubes 1.05 Mtr/Mtr content in export product

9 Castor Wheel 3 Nos.

10 Mesh Guard OR

1 No.

10 a) Spring Steel Wire 1.05 kg/kg content in export product.

b) Black Annealed Wire 1.05 kg/kg content in export product.

11 Nickel/Chromium Plate 0.97% of net weight of steel to be plated.

1 No 1 Motor Assembly along with oscillation mechanism cables thermostat and condensor OR

1 No

1 a) Super Enamelled Copper Wire/ Copper Wire Rod

1.01 Kg/Kg content in export product

b) Electric Steel Sheet 1.10 Kg/Kg content in export product

c) Bright Carbon Steel Rod 1.10 Kg/Kg content in export product

d) Pig Iron 1.10 Kg/Kg content in export product

e) Cold Rolled Sheet 1.10 Kg/Kg content in export product

f) Aluminium Alloy 1.05 Kg/Kg content in export product

g) Bush/Ball Bearing 2 Nos

h) Thermostat 1 No

I) Capacitor (Condenser) Net to Net

2 A.B.S. Granules OR

1.05 Kg/Kg content in export product.

2 a) Plug 1 No

b) Cable/Cord 1.02 Mtr./Mtr content in export product

3 Switch OR

1 No

3 a) Phenol Formaldehyde Resin 1.05 kg/kg content in export product.

b) Brass Sheet 1.05 kg/kg content in export product.

c) Polystyrene 1.05 kg/kg content in export product.

4 Terminal Block Net to net

5 Polypropylene 1.05 kg/ kg wt of P.P item

6 Silicon Tubes Net + 2% Wastage

7 Cord Grip Net to Net

8 Mesh Guard OR

1 No.

8 a) Spring Steel Wire 1.05 kg/kg content in export product.

C189 Electric Fan with Table Stand/ Wall Bracket

b) Black Annealed Wire 1.05 kg/kg content in

C26

export product. 9 Nickel/Chromium Plate 0.97% of net weight

of steel to be plated.

C190 Electrical Control Panels made of CRCA Sheets

1 kg content of import item

1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary

1.05 kg

C191 Electrical Copper Earthing Rods

1 kg 1 Electrolytic Copper Wire Bars / Wire Rods OR Copper Scrap

1.01 kg/kg content in the export product OR 1.04 kg/kg content in the export product.

1 Electrical Light Fittings components made of Brass/ Aluminium/SS in the form of castings, pipes, sheets etc.

net to net

2 Holders net to net

3 Switches net to net

C192 Electrical light Fittings with Glass, Switches and Holders

4 Glass Shades Net + 2% wastage

1 No. 1 Plastic Moulding Powder 170 gms.

a) ABS b) Polycarbonate c) Polyphenylene Oxide d)Polyacetal e) Polycarbonate f) Polyamide g) Phenol Formaldehyde(Bakelite)Powder and moulded components thereof

2 Printed circuit Boards Net to Net

3 Pre-painted Aluminium Sheets 20 gms

4 Silicon Oils 1 gm

5 Glass Sheets Net to Net

6 Industrial Jewels with Screws 2 Nos

7 Pivot 2 Nos

8 Hair Springs Net to Net

9 Resistance Wire Net to Net

10 Super Enamelled Copper Wire Net to Net

11 Duralumin Rods, Free Cutting Aluminium Rods, Capillary Tubes

Net + 2% wastage

a) Copper Bars/ Strips

b) Managanin Wire/ Rods

c) Eureka Wire/ Rods

12 Magnet Centre Core Net to Net

13 Coil Former 1 No

14 Resistors, MFR, Wire wound & Other

Net to Net

15 Mumetals Permalloy Strips & Components thereof

Net to Net

16 Pointers/ Pointers Arms Net to Net

C193 Electrical Measuring instruments Type :Moving Iron Moving Coil Dynamo Meter Bimetallic Reed type, Namely Volt meter, Ammeter, frequency Meter, WATT meter, Multimeters, Insulation testers, Maximum Demand Indicator power, Factor meter

17 Taut Bands/Ligaments Net to Net

C27

18 Barllium Copper/ Phospher/Bronze Strips and components thereof

20 gms

19 Aluminium Die Castings 100 gms

20 Bimetallic Springs 2 Nos

21 Springs Steel strips Net to Net

22 Transistors, Capacitors, IC's & other electronic components not covered by other input entries

Net to Net

23 Copper Braids Net + 2% wastage

24 Yoke 1 No

25 Hybride Circuits 1 No

26 Zener Diodes 2 Nos

27 Yoke Holder 1 No

28 Lower Boss/Under Boss 1 No

C194 Electrical Ovens made of CRCA Sheets



1.05 kg

1 KVAR 1 P.P film 0.0997 kg

2 Aluminium Foil 0.0472 kg

C195 Electrical Power HT Capacitors (All film design above 660 Volts up to 132 KV) 3 Non PCB Capacitor Oil 0.0892 kg

1 KVAR 1 P.P. film 0.1008 kg


3 Condensor tissue paper (Electrical Grade)

0.063 kgs

C196 Electrical Power HT Capacitors (mixed di-electric design) above 660 volts upto 132 KV

4 Non PCB Capacitor Oil 0.126 kg

1 KVAR 1 Metalised Polypropylene (MPP Film)

0.105 kg C197 Electrical Power LT Capacitor (Metalised Polypropylene di-electric design) up to 600 Volts.


1 KVAR 1 P.P. Film 0.168 kg


C198 Electrical Power LT Capacitors (All Polypropylene Film Design) upto 660 Volts 3 Non PCB Capacitor Oil 0.231 kg

1 KVAR 1 PP film 0.300 kgs


3 Condensor tissue paper (Electrical Grade)

0.157 kg

C199 Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts.


C200 Electrical Switch Boxes made of CRCA Sheet



1.05 kg

1 kg 1 Aluminium/ Aluminium Alloy Ingots


2 Aluminium Sheet 1.05 kg/kg content in export product

3 PFM Powder (Bakelite Powder) 1.05 kg/kg content in export product

C201 Electrical Wiring Accessories made of Aluminium

4 Taleflex/Neoprene Sheet 1.05 kg/kg content in

C28

export product

5 M.S. Wire Rod for making Screw


6 Misc. Items: Die Steel, Emery Belt/Grinding Wheel/Monting Points, HSS/ Carbide Drills & Taps, Reamers, Cutters, Bits, Thread Rolling Dies, Chasers, Aluminium Shot/ Stainless Steel Shots, Cutting Oil, Foundryluxes/Chemicals, Die Release, Paints, Stoving Thinner

Upto 2% of FOB value of exports.

1 kg 1 Zinc Ingot 1.10 kg/kg content in export.

2 M.S. Screws Net to net.

3 Nylon-6/LDPE/PP/LDPE 1.05 kg/kg content in the export product.

4 Neoprene/Rubber/Hitite Gasket material


5 Aluminium Section/Sheet 1.05 kg/kg content in the export product.

C202 Electrical Wiring Accessories made of Zinc

6 Misc. Items: Diesteel, Emery Belt Drills,Reamers, Cutting Oil.

Upto 2% of FOB value of export.

1 kg 1 Copper Alloy, Ingot/Scrap(Gun Metal, Aluminium- Bronze) OR

1.10 kg/kg content in export product of the appropriate alloy

1 a) Copper Wire Bar/Scrap 1.10 kg/kg content in the export product

b) Zinc Ingots OR

1.10 kg/kg content in the export product

1 Brass Scrap 1.10 kg/kg content in the export product

2 Steel Components viz. SS/MSG Screws, Nuts, bolts, Revets, Strips, Washers OR

Net to Net

2 a) SS/MS Wire rods/Bars 1.15 kg/kg content in the export product

b) SS/MS Sheets/Plates/Coils 1.15 kg/kg content in the export product.

3 Copper/Copper Alloy Components, viz. Screws, Nuts, Bolts, Revets, Strips, Washers OR

Net to Net

3 a) Copper/Copper Alloy wire Rod 1.10 kg/kg content in the export product

b) Copper/Copper Alloy Sheet 1.10 kg/kg content in the export product

4 Paper Tube OR Kraft Paper Electrical Grade Plastic Components OR Relevant Plastic Material

Net to net. 1.05 kg/kg content in the export product Net to net 1.05 kg/kg content in export product

C203 Electrical Wiring Accessories made of copper/Copper Alloy & relevant finished parts made of plastic/steel

5 Misc. items: Diesteel, Emery Belt Drills, Reamers, Cutting Oil

Upto 2% of FOB value of exports

C29

1 No. 1 Switches Net to net.

2 Thermal Protector Net to net.

3 Filters Net to net.

4 Polyslider Tape Net+5% wastage

5 ABS Granules Net + 5% wastage.

6 Polycarbonate Net + 5% wastage

7 Styrene Acrylonitrile for Vacuseal containers of relevant sizes


8 Polypropylene for Vacuseal containers of relevant sizes


9 Thermoplastics(Evoprene) for Vacuseal containers of relevant sizes


10 Polypropylene for Vacumizer Pump


11 Thermoplastic (Evoprene) for Vacumizer Pump.


12 Core for Silencer (Filters) Net to net.

13 Motor Net to net

14 TOD Switches Net to net

15 Power Cord with Plug Net to net.

16 Cable (Single/Multi Core Copper Wire)

Net to net

17 KSS Wire Connector Net to net.

18 Flame Retardant ABS for Vacumizer Pump


19 Nylon Polymers for Vacumizer Pump


20 Drop-in-insert (Paper Brochures) Net to net.

21 Labels (Mylar Stickers) Net to net.

C204 Electromechanical Domestic appliances with self contained motor: Vacummizer set - One set consisting of Vacummizer Pump or vacumizer pump(UL approved) or/and Vacuseal container of relevant sizes.

22 Colour Cartons Net to net.

1 No. 1 ABS Plastic Granules 0.5 Kg

2 PP Plastic Granules 0.25Kg

3 Fluorescent Tubes 2 Nos

4 Re chargeable Battery 1 No

5 ICLM 317 1 No

6 2CS 1384 3 Nos

C205 Emergency Lamp

7 2CS 8050 3 Nos

1 kg 1 Copper Rods/Copper Wire Rods (EC grade)/Continuous Cast Copper Rods/Copper Cathodes

1.01 kg/kg content in respect of the product having diameter upto 0.2mm or 1.02 kg/kg content in respect of the product having diameter above 0.2 mm

C206 Enamelled Copper Wire

2 Insulating Enamel/Varnishes Upto 5% of FOB value of exports.

C207 1 No. 1 CRGO Steel Sheets 1.26 kg.

C30

2 Copper Wire(SE)/Wire Rod 0.29 kg.

3 Aluminium Ingots/Alloy/Scrap 0.81 kg.

4 Steel Sheet 2.92kgs.

5 Bearing Plain/Sealed 2.00 Nos.

6 Capacitor 1.00 No.

Exhaust Fan 12"/300MM Sweep Domestic

7 Steel Bar 0.14 kg.

1 No. 1 CRGO Steel Sheets/ CRNGO Steel Sheet

1.68 kg.



4 Steel Sheet 4.80 kgs.



C208 Exhaust Fan 12"/300MM Sweep Industrial type



2.1 kg.






C209 Exhaust Fan 15"/380MM Sweep Industrial type



4.20 kg.






C210 Exhaust Fan 18"/450MM Sweep Industrial Type



7.00 kg.






C211 Exhaust Fan 24"/600MM Sweep Industrial Type



0.98 kg.





C212 Exhaust Fan 9"/225MM Sweep Domestic


C31


100 Nos 1 Glass Shell

2 Fluorescent Powder 0.4676 kg

3 NA Powder CMZ 0.014 kg

4 Tungsten Wire 0.008 kg

5 Lead Glass Flare 0.95 kg

6 Lead Glass Exhaust 1.31 kg

7 Lead in Wire 440 Nos.

8 Cap 101 Nos.

9 Emitter Suspension 0.0018 kg

C213 Fluorescent Circular Lamp (23W/32W)

10 Stamping Ink 0.002 kg

1000 Nos 1 Glass Tube Shells 1150 Nos.

2 Tungsten Filament OR

2020 Nos

2 a) Tungsten Wire AND

100 gms

b) Molybdenum Wire 176 gms

3 Fluorescent Powder OR

6.63 Kg

3 a) Di-Calcium Phosphate AND

6.00 kgs

b) Calcium Carbonate 2.00kgs

4 Lead Glass Flare 10.00 Kgs

5 Lead Glass Exhaust 5.00 Kg

6 Aluminium Caps OR

2020 Nos

6 Aluminium Strips 6.67 kgs

7 Lead-in-wire 4040 Nos

8 Emitter-Suspension 0.06 Litre

9 Anode Strips 0.90 Kg

10 Silicon Resin 0.087 Kg

11 Mercury 0.18 Kg

C214 Fluorescent Tube (36 Watts and 40 Watts)

12 Nickel Iron Support 0.10 Kg

1000 Nos. 1 Tungsten wire 940 Microns for Filament

86 gms

2 Moly Wire 820 Microns for Filaments

147 gms.

3 Fluorescent Powder 3500 K or 6500 K OR

5.00 Kgs.

3 a) Di-Calcium Phosphate AND

4.50 kgs

b) Calcium Carbonate 1.50 kgs

4 Lead Glass Tubing for Flare 10.00 Kgs.

5 Lead Glass Tubing for exhaust 5 Kgs

6 Glass Tube Shells 1150 Nos

C215 Fluorescent Tubes (18 Watts and 20 Watts)

7 Silicon Resins Grade H-44 20 gms

C32

8 Silver Nitrite 11 gms.

9 Triple Carbonate 47 gms.

10 Mercury Double Distilled 99.99% minimum Purity

140 gms.

11 Aluminium Caps OR

2020 Nos.

11 Aluminium Strips 3.78 Kgs

12 Lead-in-wire 4040 Nos.

1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

183.58 gms/KW

2 Copper wire bars/cathodes/rods/winding wires/strips

21.63 gm/KW

3 Pig iron for housing (end shield) OR

49.32 gms/KW

3 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing (end shield) OR

12.00 gms/KW

3 CRCA Sheets for housing (end shield)

25.00 gms/KW

4 Mild Steel sheets for mounting 37.36 gms/KW

5 Electrolytic grade aluminium for rotor

6.55 gms/KW

6 EN-8 Alloy Steel for shaft 7.20 gms/KW

7 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net)

8 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

9 Thermal protectors/thermo strips Net to net.

C216 Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 0 Watts to 25 Watts

10 Power Capacitor 1 No. (Net to net)


107.35 gms/KW


12.26 gm/KW

3 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing(end shield) OR

24.42 gms/KW

3 CRCA Sheets for housing(end shield)

50.00 gms/KW



3.30 gms/KW




1.5% of FOB price




C33


74.40 gms/KW


7.35 gm/KW


12.97 gms/KW


26.00 gms/KW



2.08 gms/KW




1.5% of FOB price





62.59 gms/Watt


5.25 gm/Watt


7.80 gms/Watt


16.00 gms/Watt

4 Mild Steel sheets for mounting 6.38 gms/Watt


1.55 gms/Watt

6 EN-8 Alloy Steel for shaft 2.78 gms/Watt



1.5% of FOB price


C219 Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 121 Watts & above


1 kg 1 a) Angles of relevant grade of Steel OR Billets / Blooms of relevant grade of Steel

1.02 kg/kg content in export product 1.045 kg/kg content in export product

b) Plates of relevant grade of Steel OR Slabs of relevant grade of Steel


C220 Galvanised Transmission Line/Telecom Towers & Parts thereof

2 Unwrought Zinc 0.065 kg

C34

1000 Nos 1 Glass Shells 1100 No.

2 Relevant Filament OR

1010 Nos

2 a) Tungsten Wire AND

48 gms

b) Molybdenum Wire 81 gms

3 Lead Glass Flare 4.2 kgs

4 Lead Glass Exhaust 2.7 kgs

5 Aluminium Caps OR

1010 Nos

5 Aluminium Strips 3.1 Kgs

6 Lead in-wire 2020 Nos

C221 GLS Lamps (upto 100 Watts and below)

7 Moly Support Wire 0.22 K.M.

1000 Nos. 1 Fused Quartz Main Tube 2.45 kgs.

2 Fused Quartz Exh. Tube 1.02 kgs.

3 Moly Ribbon 0.028x2mm 16.8 Mtr.

4 Moly Wire 0.6 mm 37.18 Mtrs.

5 Pt. Clad Moly Ribbon 2.20 Mtrs.

6 Tungsten Filament 1010 Nos.

7 Insulated Wire 107.1 Mtrs.

8 Shrink Tube 16.663 Mtrs.

9 Metal Cap 1010 Nos.

10 Metal Collar 1010 Nos.

C222 H-3 Halogen Lamps 20W-130W/12V-24V

11 Krypton Gas 0.052 M 3


2 Matrix Resistor 1010 Nos

3 Yitrium Vanadate 0.44 kg

4 Flush Gas 5.00 Ltrs

5 Exhaust 2.70 Kgs

6 Caps 1010 Nos

7 Lead-in-wire 2020 Nos

8 Aerosil 0.15 Kg

9 Solder Wire 1.80 Kg

C223 H.P.M.V. Lamps (250 W)

10 Flang 7.20 Kg


2 Arc Tube 1100 No.

3 Getter Rings 2200 Nos.

4 Flare Tube 14.00 Kgs.

5 Exhaust Tube 5.00 Kg

6 Caps 1010 Nos

7 Lead-in-wire 2200 No.

8 Nickel Manganese Strip 2100 No.

9 Ferro Nickel (Strip/Bracket) 1100.00 Nos

C224 H.P.S.V Lamps (250 W)

10 Calcium Di-phosphate 0.05 Kg

C35

1000 Nos 1 Electrodes 2320.00 Nos

2 Frit Ring 2240.00 Nos

3 Amalgam 40.00 Gms

4 Xenon Gas 8.00 Ltrs

5 PCA Tube 1060.00 Nos

C225 H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W)

6 Niomium Supports 2320.00 Nos

1000 Nos 1 Hard Glass Main Tube( 16x1.13x1435 mm)

7.6 kg

2 Hard Glass Exh. Tube(3.50x0.72x1219 mm)

0.90 kg

3 Fused Quartz Glass Rod (2.5mmx1000)

0.298 kg

4 Moly Wire 0.6 mm (45.5mm/51.7mm/56.7mm)

175 Mtrs or 1120 Sets

5 Moly Mirror/Shield 1100 No

6 Moly Sleeves (4 pc. set)(2mm/3mm/4mm)

1160 set

7 Tungsten Filament(Main) 1010 No.

8 Tungsten Filament (Sub) 1010 No.

9 Krypton Gas (99.99%) 0.0258 M 3

10 Black Top Paint (anti glare paint) 0.313 kg

11 Metal Adopter 1010 No

12 Metal Cap 1010 No

C226 H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V)

13 Metal Coller 1010 No

1 Kg 1 Tungsten Filament Wire 0.8 mm and above dia.

1.10 Kg C227 Heater Coil/ tungsten Vaccum Metallizing Coils

2 Colloidal Graphite with Solid content of 20%

0.10 Kgs

C228 Heating Elements 1 No. 1 Resistance Wire 9 SWG Net to Net

1000 Nos. 1 Quartz Rod Body 1010 Nos.

2 Quartz Exhaust Tube 1010 Nos.

3 T.T. Cathodes 1050 Nos.

4 Moly Ribbon 1010 Nos.

5 Matrix Resistors 1050 Nos.

6 Nickel Strips 0.905 kg

C229 High Pressure Mercury Vapour Lamps (125 W)

7 Capping Cement 2.2 kgs

1 kg 1 Ferrites Net to net. C230 Inductors with Torroidal Windings 2 Self Soldering Copper Wire 1.02 kg/kg content in

the export product.

C231 Industrial Heater and Thermocouple

1 MT 1 Nickel Chrome Wire & Tape 1.05 MT/MT content in export.

C232 Inline Copper Connectors

1 MT 1 Electrolytic Copper Wire Bars 1.05 MT

1 No. 1 ABS Plastic Granules 0.6 Kg

2 PP Plastic Granules 0.3 Kg

C233 Instant Water Heater

3 Heating Element 1 No

C36

4 Thermostat 1 No

5 Stainless Steel Sheet 0.95 Kg

C234 Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor.

1 No 1 Heat shrinkable Strees control tubing size 15/30 mm

1 Mtr

C235 Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor

1 No 1 Heat shrinkable Strees control tubing size 20/45 mm

1 Mtr

C236 Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor

1 No 1 Heat shrinkable anti-tracking whethering insulating tubing (Red colour size)

1 Mtr

1 kg 1 X- Ray Phosphor 0.6615 kg C237 Intensifying Screens

2 Polyester Film 0.34125 kg






6 Tungsten Filament with end plugs (240V - 300W)

1010 Nos.

7 Tungsten Support Coil 2240 Nos.

8 Tungsten Support Wire 648 Mtrs.

9 Tungsten Flashing Wire 3.5 Nos.

10 Metal Contact K-6 2040 Nos.

11 Ceramic Base R-75 2040 Nos.

12 Betac Cement 830HB 1.1 kg.

13 Marking Ink 0.055 Ltr.

C238 J Halogen Lamps 1000W/110V 260V

14 Krypton Gas 0.052 M 3.


2 Fused Quartz Exh. Tube 1.47 kg.





1010 Nos.







C239 J Halogen Lamps 1500W/2000W


C37








1010 Nos.








C240 J Halogen Lamps 300W,500W,110V-260V


1 No. 1 ABS MouldingPowder 1.05 kg/kg content in the export product.

2 Stainless Steel Sheets/Coils 1.15 kg/kg content in the export product.

3 Poly Acetal Moulding Powder 1.05 kg/kg content in the export product.

4 Motor of Relevant Rating Net to net.

5 PVC Compound 1.05 kg/kg content in the export product.

6 Brass Scrap 1.05 kg/kg content in the export product.

7 Polypropylene Moulding Powder 1.05 kg/kg content in the export product.

8 SAN MouldingPowder 1.05 kg/kg content in the export product.

9 Aluminium Ingots 1.05 kg/kg content in the export product.

10 Bronze 1.05 kg/kg content in the export product.

11 Polycarbonate Moulding Powder 1.05 kg/kg content in the export product.

C241 Juicer Mixer Grinder with Stainless Steel Jar

12 Phenol Formaldehyde 1.05 kg/kg content in the export product.

C242 Deleted

C243 Deleted

1 KM 1 Copper Wire Bar * C244 Marine Cable of different types and specifications as given in Engineering - Table 4.

2 PVC Compound *

* Note : The quantity of these will be as per the Engineering Table 4 given at the end of this product group.

C245 Miniature Circuit Breakers & Isolators

1000 Nos. of poles

1 PETP,PBTP Glass Filled, Nylon 6,Nylon 66, Plain or Glass Filled Polycarbonate, Deldon,Stanyle,Polyamide 46

75 Kgs

C38

Glass Filled Melamine,Urea Formaldehyde Unsaturated Polyester Glass Filed compound (Above materials may/may not be fire retardant)

2 Copper Strips, Copper Silver Inlay Strips, Brass Strips, Brass Extruded Sections, Phosphor Bronze, Copper Wire Bar, Rods

27 Kgs

3 Enamelled Copper Wire, Copper Wire Bar/Rod

12 Kgs

4 Thermo Bimetal, Trimetal Strips 2 Kgs

5 Silver Graphite, Silver Tungsten, Silver Cadmium Oxide contact Tips

1020 Nos.

6 Copper Silver Coated Copper Braid

1.8 Kgs

7 CRCA Sheets, Strips, Coils, including Copper Clad

75 Kgs

8 Miscellaneous Items viz. Mazak, Spring Steel Wire, Strips, Springs, Fire Retardant Chemicals, Insulating Sheet, Board, Fine Blank Parts,Plastic Latches, Toggle Link, Wire Forms, Screws, Stainless Steel Wire,Strips

Upto 3% of FOB Value

Note: 1. The above norms are for 1000 Single Pole MCBs. For Multiple MCBs, the entitlement will be multiple of above norms depending upon the number of poles.

C246 Molybdenum support wire

1 Kg 1 Molybdenum wire 1.02 kg/kg content in export




4 Moly/Nickel Lead in Wire 2240 Nos.


6 Tungsten Filament 1160 Nos.

7 Coated Reflactor 1030 Nos.

8 Krypton Gas 0.052 M 3

C247 MR-16 Halogen Lamps 20W-100W/6V-12V

9 Betac Cement 830 HB 1.10 kg/kg content in export

1 KM 1 Copper in the form of Copper Cathode/Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod

*

2 (a) PVC Compound for Unarmoured OR (b) PVC Compound for armoured OR (c) PVC Resin

60% of weight of PVC compound allowed in Engg. Table 5.

Plasticizer 30% of weight of PVC compound allowed in Engg. Table 5

C248 Multicore PVC insulated unarmoured/ armoured control purpose Copper Cable for Voltage up to 1000 V of different sizes as given in Engineering - Table 5.

3 Filler (Calcium Carbonate/Allumina/Talc/Kaoline)


C39

* Note : The quantity of item nos 1 and 2 will be as per the Engineering Table 5 given at the end of this product group.If the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 PVC compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the permissble quantity of PVC compound as per Engg. Table -5.2. DOP-30% of the permissble quantity of PVC compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per Engg. Table -5. (The quantity of item Nos. 1 & 2 (a) or 2(b) will be as per the engg. Table 5 given at the end of this product group.4. Wherever PVC stabilizer is asked for it may be allowed up to 3% of the quantity of PVC compound, subject to reduction of the same % age in the quantity of PVC resin.

1000 kgs 1 Non Alloy Steel Ingot OR

1080 kgs.

Non Alloy Steel Billets/Bars 1060 kgs.

2 Rolls for Rolling Mills 1.77 kgs.

C249 Non Alloy Ground/Earthing Rods (Galvanised)

3 Zinc @@2% of the finished weight of the ground rod

1 No 1 Relevant Glass Shell/ Acrylic Cover OR Acrylic sheet (in place of Acrylic Cover)

1 No. 1.10 kg/kg content in Acrylic Cover

2 Relevant Moulding Powder/Granules (For Body)


3 M.S Wire Rod 3.4 mm 1.05 Kg/Kg content in export product

4 Aluminium Sheet 1.05 Kg/Kg content in export product

C250 Out door Weather Proof Light Fitting with Glass Shell/ Acrylic Cover

5 Relevant Synthetic Rubber 1.05 Kg/Kg content in export product

1 kg 1 Brass Scrap 1.075 kg/kg content in export product

2 PVC Compund OR

1.05 Kg./kg content in export product.

2 PVC Shrouds 1.05 kg/kg content in export product

C251 Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush, PVC Shroud And (with or without) Ring Lock Nuts

3 Non Alloy Steel/Coil/Strip/Plate/Bar


1 kg 1 Continuous Cast Copper Rods/Copper Wire Rods /Bars/Cathodes (EC Grade)


C252 Paper Covered Copper conductors (Strips/Wires).

2 Relevant Insulating Paper 1.02Kg/Kg content in the export product.

1 kg 1 1(a) Copper Cathode/Wire Bar/CC Rod/Wire/Copper Wire Rod OR 1(b) Copper Clad/coated Steel Wire OR 1(c) Copper Alloy Wire/Cathode/Wire Bar/C C Rod/Wire/Copper Wire Rod

1 Kg 1 Kg 1 Kg.

2 Silver 99.9% purity (Ingot, Granules, Plates or Powder)/Copper wire Rod

0.025Kg.

C253 Plated Wires (Single/Stranded) (A) of Copper OR (B) of Copper Clad/Coated Steel OR (C) of Copper Alloy.

3 Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives.

2% of the FOB value of exports

C40

4 Plastic Bobbins, Plastic Spools, Protective paper/film.

As per packing policy.

Export product may have Silver, Nickel or Tin plating on it, but Silver will be allowed only if the export product has Silver plating on it.Import of base metal in 1 a), b) or c) will be allowed depending on the base metal used in export product (a) or (b) or (c)

1 kg 1 Copper (Cathode/Wire Bar/Continuous Cast Rod/Wire/Alloy Wire)/Copper Wire Rod

1.02 kg/kg of net content in the export product.

2 PTFE Resin Fine Powder 1.13 kg/kg of net content in the export product

3 Silver 99.9% Purity (Ingots/Shots/Powder)

1.003 kg/kg of net content in the export product

4 Pigments,Ink,Silicone Fluid, Polyimide Film(Kapton), Low-noise Dispersion, Tween-85, Synthetic Resin, Yarn Plain & Finished Sized including Glass Fibre Yarn, Finished forms, Dispersions of Polymeric Resins

Upto 2% of the FOB value of Export.

C254 PTFE Insulated Wires and Cables with Copper Conductor

5 S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper/Copper Alloy/Copper covered Steel/Nickel/Resistance Alloys/Stainless Steel, Connectors Flat/Round/Coaxial, Terminations.

Upto 2% of the FOB Value of exports

Note:1. Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and for nickel coated wires, nickel will be allowed.

C255 Deleted

1000 Meters 1 Copper Wire Rods (EC Grade) 41.89 kgs.

2 PVC Compound OR

91.72 kgs.

2 i) PVC Resin 58.70 kgs.

ii) Plasticizer 24.77 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

4.38 kgs.

C256 PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x1.5 sq.mm(22/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 12.8x6.0

iv) Lubricants 0.88 kg.


2 PVC Compound OR

116.41 kgs.




5.81 kgs.

C257 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x2.5 sq.mm(36/.3)Overall Dimension = Width(mm)xThickness(mm) i.e. 14.6x6.4



2 PVC Compound OR

141.38 kgs.


C258 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x4.0 sq.mm(57/.3) Overall Dimension = Width(mm)xThickness(m


C41


7.06 kgs. m) i.e. 17.2x7.4



2 PVC Compound OR

164.12 kgs.




8.19 kgs.

C259 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x6.0sq.mm(85/.3)overall Dimension = Width(mm)xThickness(mm) i.e. 18.7x7.9



2 PVC Compound OR

246.77 kgs.




12.32 kgs.

C260 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x10.0 sq.mm(140/.3) overall dimension =width(mm)xThickness(mm) i.e. 23.7x9.9



2 PVC Compound OR

306.05 kgs.




15.23 kgs.

C261 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x16.0 sq.mm(226/.3) overall Dimension =width(mm)xThickness(mm) i.e. 28.0x11.4



2 PVC Compound OR

487.98 kgs.




24.36 kgs.

C262 PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x25.0 sq.mm(334/.3) Overall Dimension = Width(mm)x Thickness(mm) i.e. 35.5x14.7



2 PVC Compound OR

570.00 kgs.




28.45 kgs.

C263 PVC 3 Core Flat cable Suitable upto 1100 V of size - 3x35.0 sq.mm(493/.3) overall Dimension = Width(mm)xThickness(mm) i.e. 39.5x16.2


C264 1000 Meters 1 Copper Wire Rods (EC Grade) 1338.72 kgs.

C42

2 PVC Compound OR

759.35 kgs.




37.91 kgs.

PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x50.0 sq.mm(703/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 45.5x18.3



2 PVC Compound OR

921.02 kgs.




45.98 kgs.

C265 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x70.0 sq.mm(440/.45) Overall Dimension = Width(mm)xThickness(mm) i.e. 51.0x20.0



2 PVC Compound OR

1206.57 kgs.




60.23 kgs.

C266 PVC 3 Core Flat Cable Suitable upto 1100 V of size- 3x95.0 sq.mm(485/.50) Overall Dimension = Width(mm)xThickness(mm) i.e. 60.0x23.5


1 KM 1 Copper in the form of Copper Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod

26.936 kgs

2 PVC Compound OR

74.80 kgs

a) PVC Resin 44.880 kgs

b) DOP 22.440 kgs

C267 PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 1 Sq.mm

c) Fillers 7.480 kgs


20.20 kgs C268 PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.75 Sq.mm

2 PVC Compound 71.38 kgs


13.46 kgs C269 PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.50 Sq.mm

2 PVC Compound 60.17 kgs

1 KM 1 (a) Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod OR

* C270 PVC Insulated Power Cable/ L.T PVC Cables of various sizes with Copper/ Aluminium Conductors unarmoured/ 1 (b) Aluminium in the form of

Ingots/ Proper Zi Rods *

C43

2 a) PVC Compound for Unarmoured

b) OR PVC Compound for Armoured

*

c) I) PVC Resin 60% of weight of PVC compound allowed in Engg. Table 6.

c) II) Plasticizer 30% of weight of PVC compound allowed in Engg. Table 6.

armoured for Voltage upto 1000 V of different sizes as given in Engineering - Table 6.

c) III) Filler (Calcium Carbonate/Alumina/Talc/Kaoline)


* Note : The quantity of these item will be as per the Engineering Table 6 given at the end of this product group.If the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 PVC compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the permissble quantity of PVC compound as per Engg. Table -5.2. DOP-30% of the permissble quantity of PVC compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per Engg. Table -5.Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same % age in the quantity of PVC resin.

1 KM 1 Copper in the form of Copper Cathode/ CC Rods/ Wire Bars (EC Grade)/Copper Wire Rod

* C271 PVC Insulated Triple Core mining cable for voltage upto 1100 V of different sizes as given in Engineering - Table 7.

2 PVC Compound *

* Note : The quantity of these items will be as per the Engineering Table 7 given at the end of this product group.

1 KM 1 Copper in the form of Copper Cathode/ CC Rods/ Wire Bars (EC Grade)/Copper Wire Rod

* C272 PVC Insulated Triple Core mining cable for voltage upto 3300 V of different sizes as given in Engineering - Table 8.

2 PVC Compound *

* Note : The quantity of these items will be as per the Engineering Table 8 given at the end of this product group.

C273 R Core (Round Shaped, Strip Wound Core)

1 MT 1 CRGO Steel Strips/Coils 1.24 MT/MT content in the export product.

C274 Radiators for Transformers (made out of CRCA Steel Sheet/ Coil

1 kg 1 CRCA Non-Alloy Steel Sheets/Coils

1.05 kg/kg

Note: In case of Coated/Painted radiators, relevant coating/painting materials may be allowed on actual requirement basis upto 10% of the FOB value of export

C275 Rectifier tanks made of CRCA Sheets



1.05 kg

C276 Reflector for 40 W Twin Tube Box Type Industrial Fitting duly prewired with vaccum pressure impregnated copper wound open type Ballast ,

1 No. 1 CRCA Sheet 2 kgs.

C44

Power Factor Improvement Capacitor, Starter, Starter Seat,Mains Terminal and Lamp Holders.

1 No. 1 Heat Shrinkable Conducting Tubing

2 Mtrs.


2 Mtrs.

3 Heat Shrinkable Stress Control Tubing

0.5 Mtrs.

C277 Screen Insulation Sleeve System

4 Anti Tracking Mastic Tape 3.0 Mtrs.

1 No. 1 Aluminium/ Aluminium Alloy Ingots/Sheets

1.05 kg/kg content in export.

2 Brake Magnet/ Bearing Magnets Net to net.

3 Relevant Plastic/Rubber Parts Net to net.

4 MS Sheets/Coils/ Strips 1.05 kg/kg content in export.

5 CRNGO Sheets/Coils/ Strips 1.25 kg/kg content in export.

6 Copper Winding Wire OR Copper Ingots/ Bars/ Rods (Electrolytic Grade)

1.01 kg/kg content in export 1.02 kg/kg content in the export.

7 Bearing Assembly Net to net.

8 Stainless Steel Rods/ Wire Rods/ Bar/ Rounds


9 Registered Assembly 1 No. (Net to net)

10 Phenolic Resin 1.05 kg/kg content in the export product

C278 Single Phase Electrical Energy Meter

11 Brass Sheets/ coils/ strips/ scraps 1.05 kg/kg content in the export product


47.80 gms/Watt


10.41 gm/Watt


10.00 gms/Watt

4 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR

10.00 gms/Watt

4 CRCA Sheets for housing OR

15.00 gms/Watt

4 Mild Steel sheets for housing 10.99 gms/Watt




1.5% of FOB price


C279 Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition


C45

10 Strain relief bush 1 No.

11 Pull chain switch with chord 1 No.

12 Aluminium alloy 0.50 kgs

13 Lead wire 1.175 Mtrs

14 Power supply chord 2 Nos.

15 CRCA Steel for end shields, mounting base, Lugs & pads

1.50 kgs.

16 Open circuit switch 1 No.

17 Centrifugal gear 1 No.

18 Terminal/ Crimp cap 3 Nos. or 4 Nos.(as per requirement: quantity to be accounted for in the export product)

19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation

3 or 4 sets (as per requirements quantity to be accounted for in the export product)

20 Plastic film for labels/ name plates

10 grams

21 Transfer ribbon for labels/ name plates

8 sq. inches


46.87 gms/Watt


7.19 gm/Watt


5.58 gms/Watt


6.00 gms/Watt


9.00 gm/Watt





1.5% of FOB price





12 Aluminium alloy 0.50 kg

13 Lead wire 1.175 Mtr


15 CRCA steel for end shields, mounting base, Lugs & pads

1.50 kgs

C280 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition


C46


18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement: quantity to be accounted for in the export product)




10 grams


8 sq. inches


20.76 gms/Watt


2.76 gm/Watt


2.80 gms/Watt


2.80 gms/Watt


4.20 gms/Watt





1.5% of FOB price







14 Power supply chord 2 Nos


1.50 kgs



18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product)


3 or 4 sets as per requirement quantity to be accounted for in the export product

C281 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition

20 Plastic film for labels/ name 10 grams

C47

plates 21 Transfer ribbon for labels/ name

plates 8 sq. inches


19.39 gms/Watt


1.89 gm/Watt


1.63 gms/Watt


1.63 gms/Watt


2.44 gms/Watt





1.5% of FOB price









1.50 kgs



18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product)




10 grams

C282 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition


8 sq. inches


0.57 kgs/KVA


0.09 kg/KVA

C283 Single Phase Transformers above 100000 KVA

3 Transformer Oil OR Transformer Oil Base Stock

0.21 kgs/KVA OR 0.23Kg/KVA.

C48





1 No. (Net to net)


0.79 kgs/KVA


0.16 kg/KVA


0.58 kgs/KVA





C284 Single Phase Transformers above 25000 KVA upto 63000 KVA


1 No. per Job


0.66 kgs/KVA


0.15 kg/KVA


0.47 kgs/KVA

3 Transformer Oil Base Stock 0.52 kgs/KVA




C285 Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA


1 No. (Net to net)


8.48 kgs/KW


0.85 kg/KW

3 Pig iron for housing 8.45 kgs/KW


0.25 kg/KW

5 EN-8 Alloy Steel for shaft 1.35 kgs/KW


C286 Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW


1.5% of FOB price


6.83 kgs/KW


0.64 kg/KW


C287 Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 56.0 KW


0.21 kg/KW

C49




1.5% of FOB price


18.48 kgs/KW


2.22 kg/KW



0.56 kg/KW



C288 Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase AC supply - 0 KW to 0.75 KW


1.5% of FOB price


10.77 kgs/KW


1.15 kg/KW



0.31 kg/KW



C289 Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase, AC supply - above 0.76 KW to 7.4 KW


1.5% of FOB price


9.60 kgs/KW


0.91 kg/KW

3 Pig iron for housing OR

6.79 kgs/KW

3 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

2.27 kgs/KW


0.46 kg/KW



C290 Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 0.76 KW to 7.4 KW


1.5% of FOB price


5.94 kgs/KW C291 Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & 2 Copper wire 0.68 kg/KW

C50

bars/cathodes/rods/winding wires/strips


5.05 kgs/KW


1.68 kgs/KW


0.17 kg/KW



including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW


1.5% of FOB price


5.24 kgs/KW


0.44 kg/KW


3.37 kgs/KW


1.12 kgs/KW


0.14 kg/KW



C292 Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 74.0 KW


1.5% of FOB price


4.44 kgs/KW


0.58 kg/KW


2.86 kgs/KW


0.95 kgs/KW



C293 Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 75.0 KW to 374 KW


1.5% of FOB price


3.46 kgs/KW


0.63 kg/KW

3 Mild Steel sheets for housing 3.42 kgs.KW

C294 Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 375 KW & above.


C51



1.5% of FOB price


20.54 kgs/KW


1.90 kg/KW


14.00 kgs/KW


4.63 kgs/KW


0.71 kg/KW



C295 Squirrel cage screen protected (SP)/Drip Proof (DP) Motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW


1.5% of FOB price

C296 Stainless Steel Cable Ties made of SS316 Grade

1 kg 1 Stainless Steel Strips/Coils of 316 Grade

1.25 kg

1 kg 1 CRGO/CRNGO/CRCA Steel Sheets/Coils

1.75 Kg/Kg content in export product.

C297 Rotor/Rotor Stampings & Stator Stack/ Stator Stampings - (in sets) for Electric Motors

2 Aluminium Ingot 1.06 Kg/Kg content in export product.

1 No. 1 Copper Electrolytic Grade Standard Wire/ Bar/Rod/Ingots

0.900 kg

2 CRNGO Steel Sheet/ Coil 0.5 to 1.0 mm thickness

1.600 kgs

3 Soldering Wire/ Billet 0.025 kg

C298 Starter Motor Armature for High Speed Vehicles Cars etc.

4 Nomex/Hypertherm F3 Ply, Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent

0.020 kg


0.900 kg

2 CRNGO Steel Sheet/Coil 0.5 to 1.0 mm thickness

4.200 kgs


C299 Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)


0.035 kg


0.700 kg

2 CRNGO Steel Sheet/ Coil 0.5 to 1.0 mm thickness

3 kgs


C300 Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)


0.020 kg

C301 Steel Welding Electrodes 1 Kg. 1 Relevant Mild Steel Wire Rod/ 0.70 Kg

C52

Stainless Steel Wire Rod

2 Low Carbon Ferro Manganese 0.031 Kg

3 Futile Sand 0.142 Kg

made of Mild Steel/ Stainless Steel

4 Titanium Dioxide 0.032 Kg

1 No. 1 CRCA Sheet 1 kg.

2 Ballast 1 No.

3 Holders 2 Nos.

4 Capacitors 1 No.

C302 Street Lighting Fittings suitable for 40 W F.T.L. duly prewired with vaccum pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders.

5 Starter 1 No.

C303 Deleted

C304 Deleted

C305 Deleted

C306 Deleted

C307 Deleted

1000 Nos. 1 Thermocouple Wire 0.05 mm Diameter Pure Platinum OR

1.96 gms.

1 Thermocouple Wire 0.05 mm Diameter Platinum 13% Rhodium (Relevant to be used in export product)

1.99 gms.

C308 Thermocouple Cartridges of Platinum/Platinum Rhodium Alloy

2 Quartz Glass Tube OD-3 mm, ID-2 mm (Relevant to be used in the export product

0.547 kg.

100 Nos. 1 Thermocouple Quality Platinum Wire Diameter 0.04 mm to 0.06 mm


2 Thermocouple Quality Wire 13% Rhodium/Platinum Diameter 0.04 mm to 0.06mm


C309 Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII OR Expandable Thermocouple Tips in PT/PT 13% RH (Type R) with paper tube of various length - Mark VII

3 Quartz Glass Tubes: ID - 2 mm, OD - 3 mm

Net to net.

1 No. 1 Polypropylene Moulding Powder 1.05 kg/kg content in the export product.

2 Natural/Synthetic Rubber(Relevent item to be allowed)


3 Brass Scrap 1.05 kg/kg content in the export product.

4 ABS MouldingPowder 1.05 kg/kg content in the export product.

5 Nylon Moulding Powder 1.05 kg/kg content in the export product.

C310 Three Jar Mixer with Stainless Steel Jar for Kitchen application

6 Stainless Steel Sheets/Coils 1.15 kg/kg content in the export product.

C53

7 Aluminium Ingots 1.05 kg/kg content in the export product.

8 Bronze 1.05 kg/kg content in the export product.

9 Phenol Formaldehyde 1.05 kg/kg content in the export product.

10 Stainless Steel Round Bar 1.05 kg/kg content in the export product.

11 Polycarbonate Moulding Powder 1.05 kg/kg content in the export product.

12 Circuit Breaker Assembly Net to net.

13 Motor of Relevant Rating Net to net.

1 No. 1 Aluminium/ Aluminium Alloy Ingots/Sheets


2 Brake Magnet/ Bearing Magnet Net to net.

3 Relevant Plastic/ Rubber Parts Net to net.

4 MS Sheets/Coils/Strips 1.05 kg/kg content in export.

5 CRNGO Sheets/ Coils/Strips 1.25 kg/kg content in export.

6 Copper Winding Wire OR Copper Ingots/ Bars/ Rods (Electrolytic Grade)

1.01 kg/kg content in export 1.02 kg/kg content in export.

7 Bearing Assembly Net to net.

C311 Three Phase Electrical Energy Meter

8 Stainless Steel Rods/ Wire Rods/Bar/ Rounds


C312 Tin Plated HDHC Copper Bus Bar or Electrolytic Grade Tin Plated Copper Bus Bars or Tinned Copper Strips/ Flats

1 MT 1 Copper Wire Bars/ Ingots 1.05 MT

C313 Tinned Copper Terminal Ends

1 MT 1 Copper Scrap OR Copper Tube/ Copper Cathode/ Copper Wire Bar/ Billets

1.05 MT/MT of Copper content in export product 1.03 MT/MT content in the export product.

1 kg 1 Copper Bars/Rods/Wires 1.03 kg/kg content in the export product

C314 Tinsel Conductor (Flat/Copper/Copper Alloy Conductors Spun with High Tenacity Polyester Filament Yarn)

2 Polyester Filament Yarn of High Tenacity(Tenacity More than 7 gms. denier)



10.38 kgs/KW


1.56 kg/KW


5.86 kgs/KW

C315 Totally enclosed fan cooled slip ring induction motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 37 KW


1.96 kgs/KW

C54




1.5% of FOB price


8.76 kgs/KW


1.33 kg/KW


5.75 kgs/KW


1.92 kgs/KW



C316 Totally enclosed fan cooled slip ring induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 37.5 KW to 75 KW


1.5% of FOB price

1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form OR Relevant Lamination/ Stampings core packs (1 No. of stator pack and 1 No. of rotor pack)

20.54 kgs/KW 1 set per motor


1.90 kg/KW


14.00 kgs/KW


4.63 kgs/KW


0.71 kg/KW



C317 Totally enclosed Fan Cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW


1.5% of FOB price

1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form OR Relevant Lamination/ Stampings core packs (1 No. of stator pack and 1 No. of Rotor pack)

9.60 kgs/KW 1 Set per motor


0.91 kg/KW


6.79 kgs/KW

C318 Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 0.76 KW to 7.4 KW


2.27 kgs/KW

C55


0.46 kg/KW




1.5% of FOB price




0.76 kg/KW


4.78 kgs/KW


1.60 kgs/KW


0.27 kg/KW





1.5% of FOB price




0.67 kg/KW


4.34 kgs/KW


1.45 kgs/KW


0.21 kg/KW





1.5% of FOB price


6.64 kgs/KW


0.95 kg/KW

C321 Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 57.0 KW to 374 KW


C56

OR


1.47 kgs/KW




1.5% of FOB price


4.30 kgs/KW


0.76 kg/KW

3 Mild Steel sheets for housing 4.70 kgs.KW



C322 Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 375 KW & above.


1.5% of FOB price

C323 Transformer Lamination/cut core made of Silicon Electrical Steel (CRGO/CRNGO)

1.0 MT 1 CRGO Silicon Electrical Steel in Coil Form

1.07 MT/MT content in the export product

1 No. 1 CRGO Steel/ Sheet/ Coil OR CRGO Transformers Lamination

2.20 kgs/KVA Net to net

2 Aluminium Winding Wires/ strips/ ingots/ wire bars

0.66 kg/KVA


2.52 kgs/KVA


4 Pre-compressed press board 0.30 kgs/KVA


6 Motorised off-load/ On-load Tap Changer/Switch

1 No. (Net to net)

C324 Transformers (Aluminium Wound) above 100 KVA upto & including 400 KVA, 3 Phase, Oil Cooled

7 Pre-pressed boards/ moulded components

1 No. (Net to net)

Note : In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.



2 Aluminium Winding Wires/ strips/ ingots/ wire bars

1.12 kg/KVA


3.57 kgs/KVA




C325 Transformers (Aluminium Wound) upto & including 100 KVA 3 Phase, Oil Cooled

6 Motorised Off-load/ On-load Tap Changer/ Switch

1 No. (Net to net)

C57


1 No. (Net to net)

Note 1. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.Note 2. If in the export product, the core is of amorphous electrical steel, then import of 2.6 kg/KVA of "amorphus electrical steel sheet/ coil may be allowed in place of import item No. 1 i.e. CRGO Steel laminations/ Sheets/ Coil allowed in this norm



2 Copper Winding Wires/ strips/ wire bars/ wire rods/cathodes

1.53 kg/KVA


2.31 kgs/KVA




6 Motorised off-load/ on-load tap changer/ Switch

1 No. (Net to net)

C326 Transformers (Copper Wound) above 100 KVA upto & including 400 KVA, 3 Phase, Oil Cooled


1 No. (Net to net)

Note: In case the tranformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted




0.51 kg/KVA


0.86 kgs/KVA

3 Transformer Oil Base Stock 0.95 kgs/KVA.




1 No. (Net to net)



1 No. (Net to net)

Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transfor Oil Base Stock, shall not be permitted




0.23 kg/KVA


0.42 kgs/KVA





1 No. (Net to net)

C328 Transformers (Copper Wound) above 100000 KVA , 3 Phase, Oil Cooled


1 No. (Net to net)

C58

Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted




0.92 kg/KVA


0.89 kgs/KVA





1 No. (Net to net)



1 No. (Net to net)

Note. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.




0.39 kg/KVA


0.79 kgs/KVA





1 No. (Net to net)



1 No. (Net to net)

Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Tranformer Oil or Transformer Oil Base Stock, shall not be permitted.



2 Copper Winding Wires/ strips/ wire bars/ wire rods/cathodes

1.22 kg/KVA


1.31 kgs/KVA





1 No. (Net to net)



1 No. (Net to net)


C332 Transformers (Copper Wound) above 4000 KVA



C59


0.61 kg/KVA

3 Transformer Oil base Stock. 0.97 kg/KVA



6 Motorised off-load/ on-load tap changer/ switch

1 No. (Net to net)

upto & including 10000 KVA, 3 Phase, Oil Cooled


1 No. (Net to net)

Note. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil of Transformer Oil Base Stock, shall not be permitted.




0.29 kg/KVA


0.58 kgs/KVA

3 Transformer Oil Base Stock 0.63 kg/KVA




1 No. (Net to net)



1 No. (Net to net)

Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.



2 Copper Winding Wires/ strips/ wire bars/wire rods/cathodes

1.55 kg/KVA

3 Transformer Oil base Stock 3.26Kg/KVA.




1 No. (Net to net)

C334 Transformers (Copper Wound) upto & including 100 KVA, 3 Phase, Oil Cooled


1 No. (Net to net)

Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.


1.17 kg/KVA Net to net

2 Aluminium Winding Wire/Strips 0.88 kg/KVA

3 Transformer Oil 1.08 Ltr./KVA

4 Phenolic Resin Bonded Paper 0.007 kg/KVA

C335 Transformers above 400 KVA upto and including 1600 KVA (Aluminium Wound)

5 Motorised Off Load/ Onload Tap Changer/ Switch

Net to net.


C60

1000 Nos. 1 Tungsten wire (Black) 42.33 gms

2 Molybdenum Wire (Black) 71.42 gms

C336 Tungsten Filaments for GLS Lamps upto 100 watts and below

3 Collodial Graphite 4.233 gms

100 Nos 1 Shaft elimination worm assy 102 Nos

2 commutator 206 Nos

3 Brush 206 Nos

4 Connector 206 Nos

5 Pole 206 Nos

6 Gear 204 Nos

C337 TV Antenna Motors

7 28 Swg Slaper enamel copper wire

7 kg

1 kg 1 Copper Wire Bar/Rod/Wire 1.02 kg/kg content in export.

2 Copper Clad Steel 1.02 kg/kg content in export.

C338 Unplated Conductors of Copper

3 Copper Alloy Wire 1.02 kg/kg content in export.

1 No. 1 CRGO Steel Laminations Sheets/ Coils OR

18.40 kgs


17.60 kgs


2.525 kgs

3 Electrical Grade Insulating Paper 1.10 kgs


C339 Voltage (Potential) Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 16 kg of item 1, 2.50 kg of item 2, 1 kg of item 3, 3 kg of item 4 and 7 kg of item 5)



23.0 kgs


22.0 kgs


4.545 kgs



C340 Voltage (Potential) transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 20 kg of item 1, 4.50 kg of item 2, 2 kg of item 3, 3 kg of item 4 and 11 kg of item 5)



230.0 kgs


220.0 kgs


45.45 kgs





189 Litres

C341 Voltage (Potential) Transformers above 145 KV (Outdoor Type)(Containing 200 kg of item 1, 45 kg of item 2, 50 kg of item 3, 175 kg of item 5 and 180 or 216 Ltr. of item 6)


C61


28.75 kgs


27.50 kgs


5.555 kgs



C342 Voltage (Potential) Transformers above 24 KV (Indoor Type)(Containing 25 kg of item 1, 5.50 kg of item 2, 3 kg of item 3, 5 kg of item 4 and 18 kg of item 5)



79.35 kgs


75.90 kgs


9.09 kgs





47.25 Litres

C343 Voltage (Potential) Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 69 kg of item 1, 9 kg of item 2, 18 kg of item 3, 78 kg of item 5 and 45 or 54 Ltr. of item 6)



143.75 kgs


137.50 kgs


27.27 kgs





162.75 Litres

C344 Voltage (Potential) Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 125 kg of item 1, 27 kg of item 2, 40 kg of item 3, 115 kg of item 5 and 155 or 186 Ltr. of item 6)



8.05 kgs


7.70 kgs


1.515 kgs



C345 Voltage (Potential) Transformers upto & including 0.66 KV (Indoor Type)(Containing 7 kg of item 1, 1.50 kg of item 2, 0.50 kg of item 3, 3 kg of item 4 and 7 kg of item 5)



29.90 kgs


28.60 kgs

C346 Voltage (Potential) Transformers upto & including 36 KV (Outdoor Type)(Containing 26 kg

2 Copper Winding Wires/ Strips/ 7.07 kgs

C62

Wire Bars/ Wire Rods/ Cathodes






31.50 Litres

of item 1, 7 kg of item 2, 4 kg of item 3, 45 kg of item 5, 8 kg of item 6 and 30 & 36 Ltr. of item 7)

7 Transformer Oil Base Stock 37.80 Litres.


2 Electrolytic grade copper 99.9 purity in Rod/ tube form

600 gms


8 Mtrs

4 Heat Shrinkable Medium Wall Tubing size 115/34 mm

250 mm

5 Heat Shrinkable Anti-Tracking Weathering Insulating tubing 32/14 mm

1.8 mm

6 Heat Shrinkable stress control tubing 15/30 mm

800 mm

7 Heat Shrinkable conducting tubing size 24/65mm

600 mm

C347 XLPE Cable joint (Heat Shrinkable) size 3 X 95 mm. sq

8 Anti-tracking weathering resistance, 3 way break out, trifurcating Gloves for H.V. Terminations (Large size) - HS

1 No.

C348 Metal Oxide gapless lightining Arrester of different rating (containing different Nos. of discs).

1 No. 1 Metal Oxide disc of relevant Dia dnd thickness (containing minimum 80% Zinc Oxide)

Equivalent to Nos. of disc in the export product, on net to net basis.

1 MT 1 Alloy Steel (Including Stainless Steel) - Bars/Rods/Plates/ Billets/Blooms

1.50 MT C349 Stainless Steel coupling/tees/Elbows.

2 Consumables viz. Saw Blades/ Cutting Tools/ High Speed Steel/ Sheets/Bars/Rods/ Coils


1.00 MT 1 Major Raw Materials comprising of:a) Non Alloy Steel Melting Scrap

1275 kgs.

b) Ferro Alloys comprising of: i)Charge Ferro Nickel/Nickel Oxide Sinter OR

60 kgs.

Nickel 24 kgs

1 ii) Ferro Chrome

iii) Ferro Manganese 20 kgs.

iv) Ferro Molybdenum 25 kgs.

v) Ferro Silicon 20 kgs.

2 Additives comprising of : 5 kgs

C350 Alloy Steel Rough Castings

a) Core Wire/Scrap/Ingot/Shots of Aluminium b)Core Wire/Lumps/Powder of Calcium Silicide(CaSi)

C63

c) Selenium d) Lumps/Powder of Misch Metal

3 Miscellaneous Items: a) i) Resin Coated Sand

360 kgs.

ii) Organic Binders 160 kgs.

b) i) Graphite Electrode 6 kgs.

ii) Welding Electrode 10.00 kgs.

iii) Mould Wash/ Mould Coat 25.00 kgs.

iv) Grinding Wheel 5.00 kgs.

v) Refractories: a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)Direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/Castables d) Dolomite/Magnesia Carbon Bricks

30.00 kgs.

vi) Industrial X-Ray Film (Various Grades for Gamma Rays Iridium 192 & Cobalt 60)

9440 Sq. Cm.

4 Furnace Oil/Diesel Oil for: i) Ladle Heating ii) Mould Heating iii) Heat Treatment

212 Ltrs.

Note: 1. The above norm is applicable only if the export products are manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15

1 kg 1 Steel Scrap 0.65 kg C351 Automotive Casting (Machined) above 100 kgs pc weight

2 Pig Iron 0.65 kg

1 kg 1 Steel Scrap 0.675 kg C352 Automotive Casting (Machined) above 10 kgs. and upto 100 kgs pc weight

2 Pig Iron 0.675 kg

1 kg 1 Steel Scrap 0.70 kg C353 Automotive Casting (Machined) upto 10 kgs pc weight

2 Pig Iron 0.70 kg

1 kg 1 Steel scrap 0.60 Kg C354 Automotive Casting (Rough) 2 Pig Iron 0.60 kg

1 kg 1 Chrome/nickel chrome/nickel chrome Moly. Stainless Steel rounds/Wire Rods/billets

1.02 kg/kg content in export

C355 Bright bar & Shaftings made from magnetic/ Nonmagnetic stainless steel 2 Misc. Items : Refractory

material, lubricating Oil, HSS Cutting tool/tungsten carbide tool/grinding wheel, furnace oil, anti-rust oil, coating chemicals/

limited to 4% of FOB Value of export

C64

picking inhabitors, die steel

1 kg 1 Alloy Steel Non-Alloy steel Billets/ Rounds/ Wire Rods


C356 Bright bars and shafting other than those made from MS and Stainless Steel

2 Misc. Items : Lubricant Oil HSS cutting tools, grinding wheels, furnace oil, Anti-rust Oil/ ceating chemicals/ Picking Inhabitors

upto 4% of FOB Value of export

1 kg 1 MS Rounds/MS Bars/Rods/ Billets


C357 Bright bars made out of mild steel

2 Misc. Items : Lubricant Oil HSS cutting tools, grinding wheels, furnace oil, Anti-rust Oil/ ceating chemicals/ Picking Inhabitors

Upto 4 % of FOB value of export.

1 kg 1 Forging Quality Crabon Steel/Non-Alloy Steel/Alloy Steel/Stainless Steel Bars/Rods/Billets/Blooms/Ingots(Relevant Materials)


2 Chemicals: Rust Preventing Oil/Primer/ Paints

Limited to 1% of FOB Value of export

C358 Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings(Machined) above 10 kgs. Pc. Weight Upto 100 kg. Pc. Weight.

3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil, and lubricants

Limited to 4% of FOB Value of Export

1 kg 1 Forging Quality Carbon Steel/Non-Alloy Steel/Alloy Steel/Stainless Steel Bars/Rods/Billets/Blooms/Ingots (Relevant Material)

1.550 Kg/kg content in export

2 Chemicals Rust Preventing Oil/Primer/ Paints


C359 Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Machined) above 100 kgs. Pc. Weight.

3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil, and lubricants




2 Chemicals Rust Preventing Oil/Primer/ Paints


C360 Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Machined) Upto 10 kgs. Pc. Weight.

3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, Relevant Fuel Oil, heat treatment chemicals, quenching oil, and lubricants




C361 Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Rough)

2 Chemicals Rust Preventing Limtied to 2% of

C65

Oil/Primer/ Paints FOB Value of export 3 Misc. Items : Refractory

material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, Relevant Fuel Oil, heat treatment chemicals, quenching oil, andlubricants


1000 Mtrs. 1 (a)Plain end Seamless Pipes OR (b)ERW Steel Pipes of relevant dia and grade as the case may be

1055 Mtrs 1055 mtrs.

2 Plain end Seamless coupling stock

28 Mtrs

3 Finished Thread inserts 30 Sets

C362 Casing Pipes conforming to API, Specification 5CT or equivalent of OD 114 mm to 508 mm (4 and 1/2" to 20") made of (a)Seamless Steel Pipes OR (b)ERW Steel Pipes 4 Cross Overs Net to net with

accountability in the export product upto a maximum of 5 Nos.

1 kg 1 Ferro silicon 0.018 kg C363 Cast Iron Spun Pipes

2 Pig Iron 1.100 kg

C364 Cast Iron Wheel 1 MT 1 Pig Iron 1.1 MT

1 MT 1 Hot Rolled steel/strips/coils 1.20 MT C365 Cold Rolled painted/ coated High Tensile steel strapping

2 Paint (water based) PU base/zinc base

10 ltrs

1000 Mtrs. 1 Plain end Seamless pipes of relevant Dia

1020 Mtrs

2 Tool Joint Forgings/ Plain and Hollow Bar Tool Joint Blank

121 pairs (on net to net basis)

3 Coating material (Optional) 115 Gallons (on net to net basis)

4 Hard Banding Material, such as, Tungsten Carbide, ARMACOR - M ARNCO 200 XT (Optional), TCS 8000, TSS Titanium.

0.24 MT (on net to net basis)

C366 Drill Pipes of OD 60.325 mm to 168.275 mm OD equipment to 2-3/8" OD to 6-5/8" OD

5 Tube Metal (Optional) 32 kgs (on net to net basis)

C367 File Blanks (made of Alloy Steel)

1 kg 1 Profiles/Bars and Rods of Alloy Steel (excluding Stainless Steel)

1.20 kg/kg of the net content in export product.

1 No. with specified weight

1 Alloy/Non-Alloy Steel Bars/Rods/Billets/Blooms/Ingots carbon (Non Alloy) steel (only relevant steel required is to be allowed i.e. against Alloy Steel product, Alloy steel and against Non-Alloy steel product,to be allowed


2 Miscellaneous Items: Rectangular Die Steel Blocks and Die Steel Rounds

Upto 4% of FOB Value.

C368 Forged Crankshaft (Made of Alloy/Non-Alloy Steel)

3 Furnace Oil 0.5 KL/MT of Export.

1 MT 1 Carbon Steel Billets 1.23 MT C369 Forged-Rolled Carbon Steel Tyres for Railway, Carriage and Wagon, Lo-comotive & Tramcar

2 Misc. Items: Die Steel/Die Blocks Cutting Tools,Cutters,Bimetallic


C66

Bandsaw Blades,Heat Treatment Chemicals

1 MT 1 Forging Quality Non-Alloy Steel/Alloy Steel in Blooms/Billets/Bars

1.72 MT

2 Rectangular Die Steel Blocks & Die Steel Rounds

0.025 MT

3 Relevant Consumables including consumable tools

Upto 3% of FOB Value of export

C370 Front Axle Beam-Forgings

4 Furnace oil 0.5 Kilo Ltr

1000 kg. 1 Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc. OR


1 a) Wire Rod of relevant grade of steel


b) Dry Drawing Lubricant/ Coating 8 kg

c) Tungsten Carbide dies 5 Nos.

d) Wet Drawing Lubricant 4 kg

e) Lead (for Patenting) 3 kg

C371 Galvanised Steel Stranded Wire (Wire Strand)

2 Zinc 40 kg

Note: Item at Sl.No.1(d) shall be allowed only if strands are made of wet drawn wires of size 1.6mm and below.

C372 Ground Rod made out of Stainless Steel Scrap

1 MT 1 Stainless Steel Scrap 1.15 MT

1 kg 1 Cold heading quality steel wire rods/ wires/ bars

1.166 kg C373 High tensile precision Fastners Cold/ Hot forged Bolts/ Screws-All varieties

2 Misc. Items: Thread Rolling Dies/ Knurling dies (Flat/ Cylinderical), Forming/ Cutting Tools and Tool and Alloy Steel.


1.0 kg Content

1 Cold Heading Quality Steel Wire rods/ Wires/ Bars

1.23 Kg C374 High tensile precision Fastners Cold/ Hot forged Nuts-All varieties 2 Misc. Items: Taps/ Tapnibs

Forming/ Cutting Tools and Tool and Alloy Steel


Note: In case the above nuts are surface coated with Bonded Solid Film Lubricant EVERLUBE 6102-G or equivalent, the same may also be allowed to the extent of 0.006 Lit/kg of the export product"

1.0 kg 1 Mild Steel/Alloy/Non Alloy Steel Rounds/Bars/Rods OR


M S Billets OR


C375 Hot forged nuts

MS Billets Cuttings/Bloom Cuttings/Re-Rollable Scrap


Note : 1. In case, the export product is galvanised, in addition to above items, an additional item - Zinc shall be allowed @ 4% of net weight of export.(2)If the export product is painted/coated, in addition relevant Paint/ Coating Powder may be allowed to the extent of 4% of the FOB value.

1000 Kgs. 1 For Non-Alloy Steel Casting:

a) Carbon Steel Scrap 1310 kgs.

C376 Investment Casting of Non-Alloy Steel/Alloy Steel including Stainless Steel 2 For Alloy Steel except Stainless

Steel Castings

C67

a) Alloy Steel Scrap 1310 kgs.

b) Ferro Alloy for composition adjustment(Fe-cr,Fe-v,Fe-Mo,Fe-Ni etc.)

26 kgs.

3 For Stainless Steel Castings

a) Stainless Steel Scrap 1310 kgs.

b) Ferro-Alloy for composition adjustment(Fe-cr,Fe-v,Fe-Mo,Fe-Ni etc.) OR

26 kgs.

3 a) Electrolytic Pure Iron 1310 kgs. - Total ammount of Ferro Alloys

b) Amount of each Ferro Alloy as per composition of Stainless Steel OR

1310 kgs X %age of Alloying elements in casting ------- %age of Alloying element in Ferro Alloy

3 a) Stainless Steel Scrap/Electrolytic Iron

1310 kgs. - Total ammount of Ferro Alloys

b) Amount of each Ferro Alloy as per composition of Stainless Steel (in kgs.)

1310 kgs. Stainless Steel Scrap X %age of Alloying elements in casting ------- %age of Alloying element in Ferro Alloy

2 Additives:

a) Ferro Manganese/Ferro Silicon/Aluminium

30 kgs.

3 a) Waxes (Paraffin Wax/Micro Crystalline Wax)

63 kgs.

b) Resin (Resin Derivatives, Tree Derivatives, Hydrocarbon resin from Petroleum)

50 kgs.

c) Plastics (Polyethylene, Ethyl Cellulose, Nylon, Ethylene-Vinyl-Acetate, Ethylene-Vinyl-Acrylate)

13 kgs.

d) Filler and other additives (Polystrene, Discarboximide, Methylene Tetramine, Isophathalic Acid)

31.4 kgs.

4 Material for Ceramic Shell Mould:

a) Colloidal Silica/Ethyl Silicate/Hybrid Binder

66 kgs.

b) Zircon/Zircon Powder/ Sand/Silica Glass/Alumina/Aluminium Silicate

1034 kgs.

c) Wetting agent(Sodium Alkyl Aryl Sulphonate, Sodium Alkyl Sulphate)

31 Ltrs.

d) Anti Foam (Aqueous-Silicone- 21 Ltrs.

C68

Emulsion, Liquid Fatty Alcohol)

C377 Iron Casting (Machined) above 10 kg & upto 100 kg pc wt (not elsewhere specified)

1 kg Content of Import Item

1 Pig Iron 1.25 kg

C378 Iron Casting (Machined) above 100 kg pc wt (not elsewhere specified)


1 Pig Iron 1.20 kg

C379 Iron Casting (Machined) upto 10 kg pc wt (not elsewhere specified)


1 Pig Iron 1.30 kg

1 MT 1 Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap

1100 kg

2 Low Ash Met. Cocke (Ash: Below 15%)

110 kg

3 Ferro Alloy comprising of FeSi & FeMn:

5 kg

4 Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint

CIF value of all these items taken together restricted to 1% of FOB value of exports.

C380 Iron Casting (Rough), not elsewhere specified

5 Packing Material (MS Round bars/ Flats/ Strips for crating and stuffing)

As per packing Policy.

Note: Out of the total quantity of the input permitted against item No.1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity.

C381 Deleted

1.00 MT 1 Major Raw Materials comprising of:

a) Non Alloy Steel Melting Scrap 890 kgs.

b) Ferro Alloys comprising of:

i) Charge Ferro Nickel/Nickel Oxide Sinter OR

10 kgs.

Nickel 4 kgs.

ii) Ferro Manganese iii) Ferro Molybdenum iv) Ferro Silicon

280 kgs. 20 kgs. 40 kgs.

2 Additives comprising of: a) Core Wire/Scrap/Ingots/Shots of Aluminium

1.50 kg

3 Misc. Items: a) i) Resin Coated Sand

360 kgs.


b) i) Graphite Electrode 6 kgs.




C382 Manganese Steel Rough Castings

v) Refractories: a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)Direct Bonded Basic Bricks

30.00 kgs.

C69

c) Monolithic/Gunning/Ramming/Castables d) Dolomite/Magnesia Carbon Bricks


9440 Sq. Cm.


212 Ltrs.



1100 kg


110 kg


5 kg



C383 Manhole Cover




1.00 MT 1 Major Raw Materials comprising of: Non Alloy Steel Melting Scrap

1360 kgs.

2 Additives comprising of: a) Core Wire/Scrap/Ingots/Shots of Aluminium b)Core Wire/Lumps/Powder of Calcium Silicide(CaSi) c)Lumps/Powder of Misch Metal d)Ferro Silicon e)Ferro Manganese

40 kgs.


360 kgs.


3 b) i) Graphite Electrode 6 kgs.




C384 Non Alloy Steel Rough Castings

v) Refractories: 30.00 kgs.

C70

a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)Direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/Castables d) Dolomite/Magnesia Carbon Bricks


9440 Sq. Cm.


212 Ltrs.


1 MT 1 Non-Alloy Steel - Bars/Rods/Plates/ Billets/Blooms

1.65 MT C385 Non-Alloy Steel - Flanges/Couplings/ Tees/Elbows 2 Misc. Items viz. Saw Blades/

Cutting Tools/ High Speed Steel/ Sheets/Bars/Rods/ Coils


1 kg 1 Forging Quality non-Alloy steel (with less than 0.6% carbon) in blooms/ billets/ bars

1.470 kg

2 Rectangular die steel blocks and die steel rounds

0.025 kg

C386 Non-Alloy Steel Forgings

3 Fuel Oil (Light diesel oil) 0.05 Kg.

1 kg 1 Non-Alloy Steel Bars/Rods/Billets/Blooms/Ingots

1.470 Kg./Kg. content in export

2 Relevant Packing Material & Chemicals LDPE, Rust Preventing Oil/Primer/Paints

Limited to 2% of FOB Value

C387 Non-Alloy Steel forgings(Rough)

3 Misc. Items: Refractory material Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including Bimetallic Bandsaw Blades Steel Shots,Fuel Oil,Head treatment Chemicals,Quenching Oil & Lubricants.

Limited to 2% of FOB Value.

C388 Nuts Milled from bar process

1.0 kg Content of Import Item

1 MS/Alloy/Non -Alloy Steel Rounds/Bars

1.650 kg

1 MT 1 Hot Rolled/Cold Rolled Carbon Steel Coils/Sheets/Plates

1.20 MT/MT content in export

2 Paint/Primer Top Coat and Backer OR

69 Ltrs

C389 Painted Slotted Angles

Epoxy Powder Upto 4% of FOB value of Exports

C71

1.0 kg 1 Non-Alloy Steel/Alloy Steel (including Stainless Steel) Round/ Billets/ Plates/ Coils


C390 Powrah/Hoe/Pick-axe/Kudali/Pick Mattock/ Cutter Mattock/ Trowel/Transplantor /Fork/Cultivator/Weeder/Bulb Planter/Combination Tool made of Non Alloy Steel/ Alloy Steel (including Stainless Steel).

2 Epoxy Powder 1.20 kg/kg content in export product.

1000 Mtrs. 1 Plain end Seamless Pipes of relevant Dia.

1055 Mtrs

2 Plain end Seamless coupoling stock

23 Mtrs

3 Coating material (Optional) 115 Gallons (on net to net basis)

4 Finished thread inserts 30 Sets (on net to net basis)

C391 Production tubing of OD 60.325 mm to 114.3mm OD equivalent to 2-3/8" OD to 4-1/2" OD

5 Cross Overs Net to net with accountability in the export product upto a maximum of 5 Nos.


1100 kg


110 kg


5 kg



C392 Sanitary Castings




1. M.T. 1 Cast Iron Scrap/Pig Iron/Steel Melting Scrap

1330 kg

2 Ferro Silicon Magnesium/Nickel Magnesium Alloy

40 kg

3 Ferro Silicon/Ferro Manganese * Please see note 3.

4 Inoculant containing strantinum/Barium/Calcium/Zirconium/and other rare earth materials

20 kg

5 Refractory Materials: Graphite Stopper/Ramming Mass/Basic Acidic ref sleeves/Magnesite Bricks

30 kg

6 Graphite Fines/Petroleum Coke 30 kg

7 Mold Coat 16 kg

C393 Spheroidal Graphite/ Malleable/Ductile iron castings (Rough).

8 Resin Coated Sand 160 kg

C72

9 Industrial X-Ray Films 9440 Sq.Cm.

Note: 1. In case of Machined Castings, the above quantities of import items are to be multiplied by factors as given below:- Machine Casting Weighing: (a) Less than 10 kg/piece - 1.36 (b) 10 kg to 100 kg/piece - 1.25 (c) More than 100 kg/piece - 1.15 2. Zinc is to be allowed @ 1% of the net weight of casting , if it is electroplated and @4% if it is glavanised. * 3.Import of item 3 shall not exceed 10% of CIF Value of Licence.4. Steel Melting Scrap shall be allowed @ 20% of the total requirement.5. Items 2,3 & 4 will not be allowed for export of Malleable iron Castings.

1.00 MT 1 Major Raw Materials comprising of:

a) Stainless Steel Melting Scrap 690 kgs.

b) Iron Flakes/Pure Iron/Iron Powder

310 kgs.

c) i)Ferro Chrome ii)Charge Nickel Oxide Sinter/Ferro Nickel OR

320 kgs.

1 c) i)Ferro Chrome 70 Kgs

ii)Nickel 100 Kgs

iii) Ferro Manganese 10 kgs.

iv) Ferro Molybdenum v)Ferro Silicon

50 kgs. 20 kgs.

2 Additives comprising of : 5 kgs

a) Core Wire/Scrap/Ingot/Shots of Aluminium b)Core Wire/Lumps/Powder of Calcium Silicide (CaSi) c) Selenium d) Lumps/Powder of Misch Metal


1250 kgs.


3 b) i) Graphite Electrode 6 kgs.




v) Refractories: a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)Direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/Castables d) Dolomite/Magnesia Carbon Bricks

30.00 kgs.


9440 Sq. Cm.

C394 Stainless Steel Rough Castings


212 Ltrs.

C73

Note: 1. The above norm is applicable only if the export product is manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15

100 Kgs 1 CR Steel 77.00 Kgs

2 Tin Ingots/Scraps 31.85 Kgs

3 Copper Wire Bars/Cathodes/Ingots/Rods/Scrap

1.24 Kgs

C395 Steel backed tin based white metal (babbit) alloy bimetal strip generally confirming to SAE 12 or equivalent

4 Antimony Ingots/Scraps 2.30 Kgs

C396 Deleted

1 kg 1 Controlled Expansion Alloys: Cold Rolled Strips of maximum thickness of 1.85 mm and minimum thickness of 1.27 mm and 73 mm width

a) H.E. Alloys: 1) Alloy with 20% Nickel, 6% Manganese and balance Ferrous


2)Alloy with 22% Nickel, 3% Chrome and balance Ferrous


3)Alloy with 72% Manganese,10% Nickel and 18% Copper.


4)Relevant Grade of Stainless Steel

1.10 kg/ kg content in the export product.

5)Nickel 1.10 kg/ kg content in the export product.

6)Copper 1.10 kg/ kg content in the export product.

b) L.E. Alloys : 1) Alloy with 36% Nickel and balance iron


2) Alloy with 42% Nickel and balance ferrous


C397 Thermostatic type Bimetal/Trimetal Strip of Various Grades and parts thereof

3)Alloy with 48% Nickel and Balance ferrous


C398 Cast Iron Weights 1 kg 1 Pig Iron 1.100 kg

1 kg 1 Alloy Steel Strips/Sheets/Coils 1.20 kg C399 Alloy Steel Hack-Saw Blades 2 Misc. Items such as Cutters,

Setting Wheels, Progressive Dye & Punch, Berkatekt

Upto 2.5%of FOB value of export

1 kg 1 Pig Iron 1.29 kg/kg content in export product.

2 Non Alloy Steel Rounds/ Bar 1.65 kg/kg content in export product.

3 Alloy/Non-Alloy Steel Flat/ Plate 1.50 kg/kg content in export product.

C400 Cast Iron Vice

4 Coal/Coke 0.15 kg/kg of export product.

C74

5 Paints/Primers/ Solvents 10 gms/kg of export product.

6 Misc. Items: cutting tools like drills, cutters, sawing blade, bimetallic hand saw blades, steel shots, refractory bricks, heat treatment chemicals.


1 kg 1 Forging Quality carbon steel round/Plates

1.35 kg/kg in export product.

C401 Chisels made of forging quality carbon steel

2 Die Steel Block consumable quench oil


1 No. 1 Spring Steel Wire 1.39 kg/kg content in export.

2 Surface Activation/Cleaning Chemicals


C402 Coil spring Expander for Piston Ring (Round)

3 Miscellaneous Items: Roller Feeds/ Coiling Tools/ Wire Guide/ Cutting Tools/ Pitch Tools/ Coiling Finger/ Nose Plier/ Wire Cutter

Upto 5% of FOB value of exports

C403 Cut off Blades made out of High Speed Steel Cobalt/Non-Cobalt Grade

1 MT 1 High Speed Steel Sheets/Coils (Cobalt/Non-Cobalt Grade)

1.57 MT

1 No. 1 Industrial Dimond Powder Synthetic

3.10%

2 Cobalt Matric Powder/ Metal Matric Powder/ Cobalt Metal Powder

103%

3 Graphite Synthetic 3% of FOB Value

C404 Diamond Impregnated Segments - Big Block Cutter: Segmented Circular/ Frame saw blade dia 1600mm to 3500mm fitted with diamond impregnated segments.

4 Steel Blanks- (Circular Disc/ Frame)

1 No (Net to Net basis)

Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product.

1 No 1 Industrial Dimond Powder Synthetic

2.50%


103%


C405 Diamond Impregnated Segments - Block Cutter-Single Blade: Segmented Circular/ Frame saw blade dia 900mm to 1500mm fitted with diamond impregnated segments.





2.60%


103%


C406 Diamond Impregnated Segments - Multi Blade Single Spindle Tiling Cutters/ Saws/ Blades - Segmented Circular saw blade of various sizes fitted with Diamond Impregnated Segments.




C75

1 No 1 Industrial Dimond Powder Synthetic

2.20%


103%


C407 Diamond Impregnated Segments - Slabbing and Edge Cutting: Segmented Circular/ frame saw blade dia 200mm to 850mm fitted with diamond impregnated segments.




1 Kg 1 Industrial Diamond Powder Synthetic

2.20%


103%

C408 Diamond Impregnated Segments - Slabbing and Edge cutting Diamond Impregnated segments for circular saw dia 200 mm to 850 mm 3 Synthetic Graphite 3% of FOB Value of

Export



2.25%


103%


C409 Diamond Impregnated Segments -Other Segmented Circular Saw/Frame Saw blade not covered under items at Sl. No. 404 to 407.





3.10%


103%%

C410 Diamond Impregnated Segments: Big Block Cutter Diamond Impregnated segments for circular saw dia 1600 MM to 3500 mm 3 Synthetic Graphite 3% of FOB Value of

Export



2.5%


103%

C411 Diamond Impregnated Segments: Block cutter-single blade Diamond Impregnated segments for circular saw dia 900 mm to 1500 mm 3 Synthetic Graphite 3% of FOB Value of

Export


1 Kg 1 Industrial Diamond Powder synthetic

2.6%


103%

C412 Diamond Impregnated Segments: Multiblade Single Spindle Tilling Cutters/ Saws/ Blades - Diamond impregnated Segmen ts of various sizes 3 Synthetic Graphite 3% of FOB Value of

Export

Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the

C76

resultant product.


2.25%


103%

C413 Diamond Impregnated Segments: Other Diamond impregnated segments not covered under items at Sl.Nos. 408,410 to 412. 3 Synthetic Graphite 3% of FOB Value of

Export


1 kg 1 Alloy/Non-Alloy Steel Flats/Plates

2 kg/kg in the export product.

2 Rigid PVC Granules for PVC Sleevings

1.05 kg/kg conent in the export product

3 a) Die Steel Blocks/ Die Steel Plates

C414 Drop forged Pliers of Alloy/ Non-alloy steel

b) Misc. Items/cutting tools like highchromium steel bars, milling cutters, quenching oil, hydraulic oil


C415 Hacksaw Frame 1.0 kg 1 H. R. Non Alloy Sheet/Flats 1.10 kg/Kg content in the export product.

C416 Hand Drill 1.0 kg 1 Non-Alloy Steel rounds 1.10 kg/Kg content in the export product.

C417 High Speed Steel Square, Rectangular and Round Cobalt & Non-Cobalt Grade Tool Bits of Cross Sectional Area less than or equal to 150 mm2

1 MT 1 High Speed Steel Cobalt bearing and Non Cobalt Bearings Square Rectangular and Round bars

1.25 MT

C418 High Tensile precision Industrial Wrenches/Socket kays of different cross section.

1 kg 1 Bright cold drawn Alloy Steel Bars/Coils of similar Cross Section.

1.10 Kg

C419 Jigsaw Blades/ Sabresaw Blades/Body Saw Blades

1 kg 1 Relevant High Speed Steel Strips/Bimetal Strips

1.57 kg

1000 Nos. 1 1 1

a)

b)

Composite Blanks of Stainless Steel and Tungsten Carbide with Dia 3.23+ / - 0.2 MM, Pin Dia 1.60+ / - 0.20 MM and Length 39+ / - 1.00 MM

OR

Stainless Steel shank of dia 3.23+ / - 0.20 and 28+ / - 2 MM overall length Tungsten Carbide pin of dia 1.60+ / - 0.20 and 16.00+ / - 2 MM overall length.

1050 Nos. 1050 Nos. 1050 Nos.

C420 PCB Drills made from composite blanks of stainless steel and Tungsten Carbide of Drill Diameter, 0.05 MM to 1.5 MM with shank dia of 3.175 MM and overall length of 38.10 MM

2 Flute Grinding Diamond Wheel, Marking Solution and Ultrasonic Solution


C421 PCB Drills of Solid 1000 Nos. 1 Solid Tungsten Carbide Blanks 1050 Nos.

C77

Dia 3.25+ / - 0.2 MM x Length 39+ / - 1.00 MM

Tungsten Carbide of diameter 0.05 MM to 1.5 MM and with shank diameter of 3.175 MM and overall length of 38.10 mm

2 Flute Grinding Diamond Wheel, Marking solution and Ultrasonic Solution


1 kg 1 Non-Alloy Steel Plate/ flats/ Bars 1.84 kg/kg content in the export product.

2 a) Die Steel Blocks/ Die Steel Rounds

C422 Pipe Wrenches

b) Misc. Items/ Cutting tools like broches, drills, grinding wheels, belts, hand saw blades, quenching oil


C423 Punches 1.0 kg 1 Non-Alloy Steel round 1.10 kg/Kg content in the export product.

C424 Scissors 1 kg. 1 CRCA Sheet 1.800 kg

1 kg. 1 Non-Alloy Steel Round 1.10 kg/Kg content in the export product.

C425 Screw Drivers (Nickel plated)

2 Nickel 0.0097 kg

1 kg 1 Alloy/Non-Alloy Steel Plates/ Flats/ Bars


2 Nickel 0.97% of the net weight of export product to be plated.

3 a) Die Steel Blocks/ Die Steel Rounds


b) Misc. Items: Cutting Tools like Broaches, Drills, Grinding Wheels, Belts, Hand Saw Blades, Quenching Oil

C426 Spanners made of alloy/ Non-alloy steel

4 Electroplating Salts and Additives, Like Brighteners, Carriers, Buffering agents, Leveling agents, Filter aids, Purification aids,Stabilizers, complexers etc.


C427 Stainless Steel Rules of variety 'x' (manufactured by photo chemicals machining process)

1 kg 1 CR Stainless Sheets/Coils of variety `x'

1.40 kg

C428 Steel files of Alloy Steel 1 kg 1 Profiles/ bars and rods of Alloy steel (excluding stainless steel)

1.25 kg

C429 Steel files of High Carbon Steel

1 kg 1 Profiles/ bars and rods of high carbon (Containing 0.6% or more carbon)

1.25 kg

1 kg 1 Carbon Steel sheet/ Coil/ Strip 1.10 kg/kg content in export product

2 ABS Copolymer 1.05 kg/kg content in export

C430 Steel Tapes/Rules (1 mtr. to 50 mtrs.)

3 Spirit level vials (to be allowed only when fitted in the resultant product)

Net to net

1 kg 1 Non Alloy Steel Plate/ Flat/ Bar 1.65 kg/kg content in export product.

C431 Steel Vices

2 Non Alloy Steel Round/ Bar 1.65 kg/kg content in export product.

C78

3 Paint/ Primer/ Solvent 10 gms./kg of export product.

4 a) Die Steel Block

b) Misc. items: Cutting tools like drills, milling cutters, sawing blade, bimetallic hand saw blades, steel shots, welding electrode, heat treatment chemicals


1 No. 1 Control Box for Socks Knitting Machine

1 No.

2 Electric Motor 1 No.

3 Actuator 3 Nos.

4 Proxmity Switch 2 Nos.

5 Threads Cutter 1 No.

6 Aspirator 1 No.

7 U. Tube 1 No.

8 Air Valve 1 No.

9 Air Filter 1 No.

10 Needle Protector 2 Nos.

11 Connector 1 No.

12 Needles 325 Nos.

13 Ejector Box 1 No.

14 Bearing 8 Nos.

15 Knitting Elements:

a) Sinker 325 Nos.

b) Jacks 325 Nos.

c) Hooks 325 Nos.

16 High Carbon High Chromium Bar

45.5 kgs.

C432 Automatic Socks Knitting Machine (Mechanical)

17 Alloy Steel Bar EN 36 Grade 45.5 kgs.

C433 Card Wires 1 kg 1 High Carbon Steel Wire Rods 1.170 Kg


2 Nylon Monofilament Yarn of relevant denier (Relevant Nylon Grade in export i.e. 6 or 66 to be allowed)


C434 Circular Knitting Pins (Aluminium)

3 PVC Sheeting Net to net.

1 No. 1 Electronic Control Box for Socks Knitting Machine

1 No.

2 Counting Unit (Encoder) 1 No.

3 Electric Motor 1 No.

4 Actuator 4 Nos.

5 Cylinder for Main Drum Movement with Pipeline and Connector Complete

2 Nos.

6 Proxmity Switch 2 Nos.

C435 Computerised Automatic Power Socks Knitting Machine

7 Cylinder for yarn finger with 20 Nos.

C79

pipeline & connector complete

8 Oil Lubricator 1 No.

9 Thread Cutter 1 No.

10 Aspirator 1 No.

11 U. Tube 1 No.

12 Air Valve 1 No.

13 Air Filter 1 No.

14 Needle Protector 2 Nos.

15 Fixed Guard yarn 40 Nos.

16 Rotating Guard Yarn 10 Nos.

17 Connector 1 No.

18 Needles 325 Nos.

19 Ejector Box 1 No.

20 Bearing 8 Nos.

21 Knitting Elements:

a) Sinker 325 Nos.

b) Jacks 325 Nos.

c) Hooks 325 Nos.

22 High Carbon High Chromium Bar

45.5 kgs.

23 Alloy Steel Bar EN 36 Grade 45.5 kgs.

24 Floppy Disc unit 1 No.

1 kg 1 CRCA Steel Sheet/Coil in 0.3 mm and 0.45 mm thickness

0.53 kg

2 Carbon Black 0.04 kg

C436 Contour Tape

3 Rubber Chemicals (Accelerator and Zinc Oixde)

0.02 kg

C437 Cylinder Wires 1 kg 1 High Carbon Steel Wire Rods 1.290 Kg

C438 Doffer Wires 1 kg 1 High Carbon Steel Wire Rods 1.231 Kg

C439 ENDCAP 1.0 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate


C440 Flat Tops 1 kg 1 High Carbon Steel Wire Rods 1.02 kg/kg content in export product

C441 Hydraulic End Cap 1.0 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate


C442 Hydraulic Press 1 No. 1 Relevant Components for assembly of Machine

Net to net.

C443 Injection moulding machine parts: Deckel /Cover

1.0 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate


C444 Injection Piston 1.0 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate


C445 Lincker-in-Wires 1 kg 1 High Carbon Steel Wire Rods 1.337 kg

1 No. Any and /or all following items which are actually required in export product:

C446 Plastic Extrusion Plants & Machineries Rigid PVC & HDPE Pipe Plant, Bag Maker Machine, 1 Plastic Bearing 102/100nos. content

in export product.

C80

2 Photo Cells 102 Nos/ 100 Nos. content in export product.

3 Round Belt 102 Nos/ 100 Nos. content in export product.

4 Teflon Adhesive Tape 105 Meter/ 100 Meter content in export product.

5 Energy Regulator Net to Net.

6 Melt Pressure Transducer Net to Net.

7 Electro Modules (clutch brake modules)

Net to Net.

8 Roraty Union Net to Net.

9 Various bearing such as Ball Bearing, Cylin- Drical Roller Thrust Bearing, Tandem Bearing, Slewing Bearing, Needle Roller Bearing, Cylinderc Roller Thrust Bearing etc.

Net to Net.

10 T Die for Films/ Sheets Net to Net.

11 Machine Knief/ Ring String Cutters

Net to Net.

12 Nylon Tube 110 Meter/ 100 Meter content in export product.

13 Timing Belt 102 Meter/100 Meter content in export product.

14 Deltron Rod 102 Nos/100 Nos content in export product.

15 Micro-Switches Net to Net.

16 Hopper-Autoloader Net to Net.

17 Float-Switches Net to Net.

18 Extruder Thrust Box Net to Net.

19 Gravimetric Mass through put recording (IGS) weight per meter control system (Inox Saveomat or equivalent system)

Net to Net.

20 Compact Ball Bearing Linear Motion Bearing

Net to Net.

21 Hopper Dryers Net to Net.

22 A.C./D.C Motors Net to Net.

23 Frequency Control Drives Net to Net.

24 Voltage Stabilizer/ Transformer Net to Net.

25 Thyristor Drives Net to Net.

26 Thyristor Modules Net to Net.

27 Temperature Controllers Net to Net.

28 Gear Boxes (Worm/Helical/ Platnetary)

Net to Net.

29 Plumber Blocks Net to Net.

Film Plants such as PP/HM/HDPE/LD/LLD/PVC Film Plant, Tape Plant, LD Foam film Plant, Extrusion Plant, Single Screw Plant, Mixer, Cooler, PVC Wire & Cable/Spring coating plant with/without caterpillar, Single spindle, torque motor winder with/without Dies, Three layer plant, waste Recycling plant, twin screw pipe plant, pipe corrugator plant, pelletising plant, box strapping monofilament, fabrilating plant, casing & caping plant, profile making plant,reprocessing/lamination/Vented Extrusion Plant.

30 Flange Bearing Blocks Net to Net.

C81

31 Thermocouples Net to Net.

32 Electrical Contactors 102 Nos./ 100 Nos. content in export product.

33 Electrical Relays 102 Nos./ 100 Nos. content in export product.

34 Moulded Circuit Breakers 102 Nos./ 100 Nos. content in export product.

35 IC'S (Intergated Circuits) Net to Net.

36 Sub-assy. OF P.C.B. Net to Net.

37 Electrical Wires & Cables 102 Nos./ 100 Nos. content in export product.

38 C.R.Defective Sheets Net to Net.

39 Alloy Steel Round Stock/Bar 105 kgs/100 kgs content product.

40 HR Sheets/Coils 105 kgs/100 kgs content in export product.

41 Aluminium/Alloy Castings Net to Net.

42 Brass Scrap 105 kgs/100 kgs content in export product.

43 Aluminium Pipe Net to Net.

44 Acrylic Cylinder Net to Net.

45 Oil Pressure Switches Net to Net.

46 Temp. Thermo Stat Switches Net to Net.

47 Slurry Pumps Net to Net.

48 Hydraulic Screen Changer Net to Net.

49 Hydraulic Powerpacks Net to Net.

50 Pneumatic Cylinders Net to Net.

51 Rodless Pneumatuc Cylinders Net to Net.

52 Solenoid Valves Net to Net.

53 Proximity Switches Net to Net.

54 Ammeters Net to Net.

55 Voltmeters Net to Net.

56 Infra Red Ceramic Heaters Net to Net.

57 Cartridge Heater Net to Net.

58 Ceramic Heaters Net to Net.

59 Blowers Net to Net.

60 Loadcells 102 Nos./ 100 Nos. content in export product.

61 Limit Switches 102 Nos./ 100 Nos. content in export product.

62 HRC Fuses 102 Nos./ 100 Nos. content in export product.

C82

63 Roller Chains 102 Meters/ 100 Meters content in export product.

64 Sprockets Net to Net.

65 Oil Seals Net to Net.

66 Nylon Rod & Sheets 110 kgs/100 kgs content in export product.

67 Semi Conductor Fuses 102 Nos./ 100 Nos. content in export product.

68 Acrylic Sheets 110 Nos./ 100 Nos. content in export product.

69 Gaskets Net to Net.

70 Silicon Gaskets Net to Net.

71 Expanded PTFE Gaskets Net to Net.

72 Pneumatic Fittings Net to Net.

73 Polyurthene Tubings 105 Meters/ 100 Meters content in export product.

74 Airlifter Cum Regulator Assy. Net to Net.

75 Air Expanding Reel Shaft Assy. Net to Net.

76 Neoprene/Hiplon/ Silicon Rubber Rollers

Net to Net.

77 Mirror Finish Chrome Plated Chilled Roll

Net to Net.

78 Fabrillitting Rollers Net to Net.

79 Needle Pin 102 Nos./ 100 Nos. content in export product.

80 Molycoat Grease Net to Net.

81 Infra Coat Grease Net to Net.

82 Iso Flex 3000 al temp. Grease Net to Net.

83 Ring Magnets Net to Net.

84 Camshaft Net to Net.

85 Cam Follower Net to Net.

86 Yarn Guide Net to Net.

87 Star Tolerance Rings 102 Nos./ 100 Nos. content in export product.

88 Electronic Tension Controller 102 Nos./ 100 Nos. content in export product.

89 Linear Drive Unit Net to Net.

90 Embossing Wheel Net to Net.

91 Mould Blocks Net to Net.

92 Corrugator Dies & Die Heads Net to Net.

93 Track Rollers Net to Net

94 Nylon Sandwitch Flat Belt 102 Meters/ 100 Meters content in

C83

export product.

95 Low Voltage Heating Element 102 Nos./ 100 Nos. content in export product.

96 Ten Turn Potentionmeter 102 Nos./ 100 Nos. content in export product.

97 Sensors Net to net.

98 Linear Transducer/ VDO Pressure Transducer

Net to net.

99 Thrust Ball Bearing Spherical Roller Bearings, Bush Bearing, Wheel Flange Rollers etc.

Net to net.

100 Various Switches such as Rotary Net to net.

101 Drive such as Converters Net to net.

102 Non Alloy Round Stock/ Bar 1.05 kg/ kg content in export product.

103 Steel Pipe 1.02 kg/ kg content in export product.

104 Hydraulic Cylinder Net to net.

105 Band Heters Net to net.

106 Various Types of Seal Kits Net to net.

107 PVC Tubing 1.02 kg/ kg content in export product.

108 Water Filter-cum-Regulator Assy Net to net.

109 Cam Follower/ Roller Net to net.

110 Thread Guide Net to net.

111 S.S. Filter Belts Net to net.

112 Coil Net to net.

113 Encoder/ Encoder Cables Net to net.

114 Flow Meter Net to net.

115 Servo Valve Assembly/ Actuator Net to net.

116 Various Machined Mechanical parts

Net to net.

117 Control Panels Net to net.

118 Extruder Screw Net to net.

119 Extruder Barrel Net to net.

120 Air Compressor Net to net.

121 Filter Elements/ Suction Filters Net to net.

122 Pressure Gauge/ Indicator/ Oil Gauge

Net to net.

123 'O' Rings Net to net.

124 Thermo Meters/ Bi-Metal Thermo Meter

Net to net.

125 Terminal Blocks Net to net.

126 Hose Union Net to net.

127 Universal Elbow/ Joint Net to net.

128 Accumulator Net to net.

129 Scrapper Net to net.

C84

130 Programmer Net to net.

131 High/ Low Pressure Elements Net to net.

132 MMC Units Net to net.

133 Motor Protection Controller Net to net.

134 Programmable Logic Control Net to net.

C447 Plates Injection cylinder 1.000 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate

1.10 kg/Kg content in the export product.

1 No 1 Bright Steel Bar EN 9 435 Kg

2 Free Cutting Steel 152 Kg

3 Nose Bar 54 Kg

4 Aluminium Rounds 20 Kg

5 Dial Gauges 2 Nos

6 Vernier Caliper 1 Nos

7 Height Gauges 2 Nos

8 CRCA Strip 557 Kg

9 MS Flat 41 Kg

10 SAE 52100 Chromium ball bearing steel Bar/Tube

154 Kg

11 Polypropylene Granules 50 Kg

12 Steel Ball 24000 Nos

13 Special Adhesive 10 Kg

14 Springs 420 Nos

15 Allen Cap. Screws 915 Nos

16 Rubber Aprons 840 Nos

17 Rubber Cots 840 Nos

18 Bearings 14 Nos

C448 Ring Frame drafting system

19 Diamond Crusher 1 No

1 No 1 Bright Steel Bar EN 9 780 Kg

2 Free Cutting Steel Bar 50 Kg

3 Nose Bar 54 Kg

4 Aluminium Rounds 28 Kg

5 CRCA Strip 431 Kg

6 MS Flat 42 Kg

7 SAE 51200 Chromium ball bearing steel Bar/Tube

130 Kg

8 Special Adhesive 20 Kg

9 Steel Balls 20,000 Nos

10 Polypropylene Granules 40 Kgs

11 Springs 204 Nos

12 Allen Cap. Screws 129 Nos

13 Rubber Aprons 204 Nos

14 Rubber Cots 408 Nos

15 Dial Gauges 2 Nos

C449 Speed Frame Drafting System

16 Height Gauge 2 Nos

C85

17 Vernier Caliper 1 No

18 Diamond Crusher 1 No

C450 Stainless Steel Pressure Vessels made of AISI 316/L304 (Non-Magnetic)

1 kg 1 CRSS Sheets/ Strips/ Plates/ Coils (Non-Magnetic) AISI 316/L/ 304 Grade) (relevant grade)

1.10 kg

C451 Tail Stocks made of Steel 1.000 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate


C452 Textile Machinery Spare parts perforated Nickel Screen

1 Kg 1 Nickel pellets/Square/Strips 1.08 Kgs

1 No 1 EN 1 A leaded free cutting steel 1.2096 Kg

2 Chromium Ball Bearing Steel SAE 52100 specter

0.1956 Kg

3 Aluminium Rounds 0.05625 Kg

4 Components :

a) D Button and Spring 3 Sets

C453 Textile Spindle upper part

b) Yarn Cutting Knife 1 No

1 No 1 EN1A leaded free cutting Steel 1.4875 Kg

2 SAE 52100 Ball Bearing Steel 0.1969 Kg

3 Aluminium Rounds 0.1392 Kg

4 Buttons/Springs 3 Sets

5 Complete Insert 1 No

6 Desmopan granules 1.5 gms

7 Brakes 1 No

8 Polypropylene Granules 0.100 Kg

C454 Textile spindle with insert

9 Poly Carbonate 0.065 Kg

C455 Thrust housing made of Steel.

1.0 kg 1 Non-Alloy Steel rounds/HR Sheet/Plate


C456 390 KV Surge Arresters/Lightining Arresters

100 Nos. 1 Zinc Oxide Disc 3" Dia, GE Type 9L26 ZNW 107

103 Nos.

1000 kgs 1 Ferro Silicon 1000 kgs C457 75 Inoculant (Si - 70-76%) Ca - 0.6-1.0%, Al - 0.6-1.0%, Fe - 22-27%

2 Ferro Silico Calcium 100 kgs

1000 kgs 1 Non alloy steel melting scrap 1200 kgs

2 Graphite Electrode 6 kgs

3 Cored wire/ lumps/ powder of calcium silicide (CaSi)

1 kgs

4 Rolls/ Tungsten carbide rings for rolling mills

1.77 kgs

5 Copper Mould 0.0007 Nos

6 Silico Manganese OR

Qty in Kgs as in Formula 1) of Note

6 a) Ferro Silicon Qty in Kgs as in Formula (2) of Note 4

C458 Alloy Steel (Other than Stainless Steel) Wires (from melting scrap)

b) Ferro Manganese Qty in Kgs as in Formula 3) of Note 4

C86

7 Refractory comprising of : 15 kg

a) Zirconia/ magnesia nozzles

b) Aluminium-graphite nozzles/ monoblock stoppers/ stopper heads/ stopper rods/ shrouds

c) Porous plugs/ seat blocks/ sleeves/ slide gate plates

d) Direct bonded basic bricks

e) EBT Tubes/ mass/ bricks

f) Monolithic/ gunning/ ramming mass/ castables

g) Dolomite/ magnesia carbon bricks

8 Other ferro alloy(s) (Including charge/ ferro nickel/ charge chrome etc ) provided the alloying element(s) is/are actually present in the export product

Qty of each ferro alloy in kg as in formula (iv) of note 4

9 Casting powder 2 kgs

10 Saw/ shear blade 0.01 kg

11 Copper scrap/ Copper Cathode/Copper Wire Bar/Copper Rods (if copper is actually present in the steel)

0.04 kg

12 Furnace oil (For captive power plant only)

70 kgs

13 Furnace oil for oil fired reheating furnace in the rolling mill

50 kgs

14 Furnace oil for ladle heating 6 kgs

15 Lubricant (for captive power plant)

0.65 kgs

16 Low silica lime stone 100 kgs

17 Cored wire/ scrap/ ingots of aluminium

1 kg

18 Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel only)

2.5 kgs

19 Raw petroleum coke 5 kgs

20 Ceramic coated lancing pipe 1 No

21 Temperature tips 0.50 No.

22 Sampler tips 0.25 No.

23 a) Dry drawing lubricant/ coating 8 kgs

b) Wire drawing soap 7 kgs

c) Tungsten carbide dies 5 No

d) Wet drawing lubricant/ coating 4 kgs

e) Plastic bobbins/ spools 300 Nos

Note: 1. The above norms is applicable only if the export product(s) is manufactured through electric arc furnace route/ induction furnace route using steel scrap as basic raw material. 2. Value of consumable item at Sl.No 2, 4, 5,7 (a to g) 9,19,20,21,22,23 (a to e) shall not excced 25% of the total CIF value of the licence. 3. In case the product(s) is manufactured through induction furnace route, the item at Sl.No.(2) will not be

C87

allowed. 4. (i) 5.50 X(mean average of % manganese content+mean average of % Silicon content in Steel) (ii) 1100 X (mean average of % Silicon content in Steel)divided by (mean average of % siliconcontent in ferro silicon). (iii) 1100 X (mean average of % Manganese content in steel) divided by(mean average of % Manganese content in ferro manganese) (iv) 1100 X (Mean average of % alloy content in steel)devided by (mean average of% alloy content in respective ferro alloy. 5. Import of Items at Sl.No.23(d to e) would be allowed against export of wire below 1mm only

1 Tonne 1 Major Inputs:

a) Non-alloy Steel Melting Scrap, Pig Iron, Sponge Iron including Hot Briquetted Iron (HBI)

In kg. as per Note 2.

2 Additives (Ferro Alloys/Metals/Compounds):

In kg. per kg content of alloying element in the export product

a) i)Ferro Silicon (Si : 75%) 1.70

a) ii) Ferro Manganese (Mn : 75%) OR

1.43

a) i) Ferro Silicon (Si : 75%) 1.46

a) ii) Silico-Manganese (Mn : 65% & Si : 15%)

1.65

b) Charge Chrome, High Carbon Ferro Chrome (Cr : 60%) OR

1.79

Low Carbon Ferro Chrome (Cr : 70%)

1.53

c) Unwrought Nickel (Ni : 99%) OR

1.04

Ferro Nickel, Nickel Oxide Sinter (Ni : 40%)

2.58

d) Lead (Pb : 99%) Scrap/ Shots/ Wires/ Powder in cored wire

1.60

e) Ferro Molybdenum (Mo : 65%) OR

1.58

Molybdenum Oxide (Mo : 60%) 1.89

f) Ferro Titanium (Ti : 70%) 2.43

g) Ferro Tungsten (W : 75%) 1.38

h) Any other Nobel/Special Ferro-alloys (Ferro Vanadium, Ferro Boron, Ferro Phosphorous, etc.)

1.38

I) Any other metal (not present in aforesaid ferro-alloys/metals) in unwrought or wrought form or in powder form in cored wires

1.04

j) Sulphur stick/Sulphur powder in cored wire

2.00

3 Consumables / Misc. Inputs: In Kgs

a) Graphite Electrodes (For EAF Furnace Only)

4

b) Relevant Cl, Steel Rolls for Hot Rolling Mill/Continuous Casting Machine

0.06

C459 Alloy Steel (other than Stainless Steel, Exhaust Valve Steel and High Speed Steel) Semi finished Products (Blooms, Billets and Slabs) and Ingots

c) Relevant Copper lined Moulds, Copper Moulds for Continuous Casting (if export product is

0.01

C88

produced through Continuous Casting route with/ without further rolling)

d) Casting Powder 1

e) Aluminium wires, Notched bars, scraps, shots, ingots, Dross, Powder in Cored Wire and Ferro Aluminium

1

f) CaSi Lumps, CaFe Lumps, Powder of CaFeAl/ CaFe /CaSi in Cored wire

0.1

g) Metallurgical Coke (Nut, Pearl, Fines)

20

h) Raw / Calcined Petroleum coke 4

I) Rolling Mill Oil, Hydraulic Oil, Lubricating Oil

0.5

j) Celox Inserts, Temperature Tips, Oxygen Probes, Sampler Probes, Sampler Tips

0.1

k) Relevant Shear Blades, Saw Blades

0.01

l) Oxygen Lance pipes, Sub-merged tuyers, Atmospheric injector

0.1

m) Calcium Carbide 0.5

n) Low silica lime stone/ Calcined lime

76

o) Refractories :

i ) Relevant shaped Refractories (Fired/Un-fired Bricks/Shapes)

4

ii) Relevant Monolithic Refractories (including Castables, ramming mass, gunning mixes)

10

iii) Relevant Special Refractories i.e. C.C refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles

1

4 Energy Sources:

a) Relevant fuel for electric power for Steel making and Auxiliaries (for units with captive power plant/source only)

1000500 K. Cal

b) Relevant Lubricant for captive power plant

1 kg

c) Relevant fuel for fuel fired re-heating furnace (if & only if export product is supplied in rolled condition)

261000 K. Cal

d) Relevant fuel for electric power for hot rolling mill & auxiliaries (if & only if export product is supplied in rolled condition)

217500 K. Cal

e) Relevant fuel for ladle / tundish / ferro-alloy heating

35000 K. Cal

Note: 1. This norm is applicable for export product manufactured adopting Electric Arc Furnace/ Electric

C89

Induction Furnace using Non-alloy Steel Melting Scrap as the basic input with Sponge Iron/HBI and Pig iron as partial substitutes. Note: 2. The total quantity of items allowed against Sl. No. 1 (a) shall be limited to 1115 Kg. minus the quantity of ferro alloys/ metals/ compounds allowed against Sl. No. 2 further, individual quantity of Pig Iron and Sponge Iron/ HBI allowed against Sl. No. 1 (a) shall not exceed 20% and 65% respectively of the total quantity of items to be permitted therein in line with Note 1 above. Note: 3. Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the parentheses against each alloy. If the percentage of alloying element in the ferro-alloy is higher/ lower, the revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm Actual % of element in the imported ferroalloy/metal/compound Note: 4. For a given alloying element in steel, wherever two alternate ferroalloy / metals / compound of the same alloying element have been permitted and it is proposed to import a combination of both, individual quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying element in two forms (but within the overall quantity of alloying element in the steel), using the content based formula given therein. Note: 5. Alloying element(s) in steel is/are prescribed by specifying the minimum value or a range or the maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the maximum value of the respective alloying element(s) in the export product shall be taken into consideration. Note: 6. In case import of alloy steel melting scrap of known chemical composition is resorted to, quantity of respective ferroalloy/metal/compound to be allowed will reduce to account for the recoverable alloying element (s) (Nickel, Copper, Chromium, Molybdenum and Manganese) in the scrap. The reduced quantity of each ferroalloy/metal shall be obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following formula from the total quantity as per SION read with Note 3: Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap 1.115 x % of relevant element in ferroalloy/ Metal / compound Ferro alloys/metals/compounds of elements other than that of Nickel, Copper, Chromium & Manganese shall be allowed as per the content base formula given therein without any reduction. Note: 7. The specified quantities of energy sources/ fuel for electric power generation (in K. Cal ) against import item 4 (a) & 4 (c) which correspond to electric power consumption of 500 and 100 KWH per tonne of export product have been allowed assuming that Captive Power Plant (CPP)/Source of matching capacity exist. In case CPP in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note: 8. Quantity of energy sources / fuels (in K. Cal) correspond to a fuel having unit heat value of 8700 K. Cal/Kg. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be worked out by dividing the K. Cal figures given in the SION by the actual unit heat value of the imported fuel. Note: 9. Import of items at Sl. No. 3(b), (c), (d), (i), CC Refractories under 3 (n) (iii) and 4(c) shall not be permitted against export of steel ingots.

C90

1 Tonne 1 Billets/Blooms of relevant grade of alloy steel OR

1030 kg

Ingots of relevant grade of alloy steel

1050 kg

2 CI / Steel Rolls, TC Rolls, Rings for Rolling Mill

0.60 kg. for Billets/Blooms input OR 1.20 kg. for ingot inputs

3 Relevant fuel for fuel fired Re-heating furnace.

261000 K. Cal.

4 Relevant Fuel for electric power generation for Hot Rolling & auxiliaries (for units with captive power plants/source only)

217500 K.Cal.

C460 Alloy Steel (other than Stainless Steel) Bars and Rods (including Rounds, Flats, Wire Rods etc), Angles, Shapes & Sections (including Special Profiles),

5 Relevant Shear Blades, Saw Blades

0.01 kg

Note 1. The quantity of energy sources/ fuel for electric power generation (i.e. 217500 K. Cal) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that Captive Power Plant (CPP) / Source of at least this capacity exist. In case CPP/Source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis Note 2: Quantity of fuel for re-heating furnace (in K. Cal.) corresponds to a fuel having unit heat value 8700 K.Cal/kg. for which, 30 kg of the said fuel may be allowed. Import of any other fuel of higher / lower unit heat value (as long as it is relevant to the re-heating furnace installed in the unit) may be permitted, quantity of which (in Kgs. / Cubic Meters / K. Liters) may be worked out by dividing the K. Cal. figures in the SION by the actual unit heat value of the imported fuel.

C461 Deleted

1000 kgs. 1 Major Raw Materials comprising of:

a) Andalusite (Alumina 56% and above) and/or i)Fused and/or Sintered Alumina/Mulite (Alumina 56% and above)

750 kgs

b) Graphite(Fixed Carbon 92% and above) and/or i)Silicon Carbide

200 kgs

c) Zircon and /or Zirconia Bubbles Grains (Zirconis Oxide 80% and above) and/or i) Ceramic Fibre Paper

250 kgs

2 Additives comprising of:

a) Fume/Colloidal Silica and/or 40 kgs

b) Metallic Alloys of Aluminium, Silicon, Magnesium and/or

c) Phenolic Resin and/or i) Ceramic Fibre Paper

d) Alumina Cemant/Binder

3 Miscellaneous Items:

a) Mould and Mould Liners Upto 10% of the CIF value.

C462 Alumina Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars

b) Cutting Tools

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed.

C91

1000 kgs 1 Major Raw Materials comprising of: a) Fused and/or sintered and/or Calcined and/or Tabular Alumina (Alumina 82% and above) and/or i) Calcined Bauxite (Alumina 82% and above) and/or ii)Beta Alumi(Alumina 94% and above) and/or iii) Graphite (Fixed Carbon 85% Minimum) and/or

800 Kgs

b) Fused Zirconia (Zirconium Oxide 85% and above) and/or i) Silicon Carbide and/or Fused Silica and/or ii) Coating Material and/or iii) Alumina Silicate Fritt (Silicon Oxide 50% and above, Boron Oxide20% and above) and/or iv) Boron Carbide (Boron 72% and above)

400 kgs

2 Additives comprising of: a) Metallic Alloys of Aluminium, Silicon and magnesium and /or i) Phenolic Resin

80 Kgs

C463 Alumina Carbon Continuous Casting Refractories and/or Mortars

3 Miscellaneous Items: a) Moulds and Mould Liners b) Cutting Tools

Upto 17 % of CIF value.

Note 1. In the case of export of Mortars, the misc. at item No. 3(a) & 3(b) will not be allowed.

1000 Kgs 1 Major Raw Material comprising of:

a) Fused and/or Sintered Alumina and/or Tabular (Alumina 80% and above) and/or i)Calcined Bauxite (Alumina 80% and above) and/or ii)Andalusite (Alumina 56% and above)

800 kgs

b) Ceramic Fibre Paper and /or i) Carbon Black and/or Graphite and/or ii) Silica Carbide and/or iii) Micro Fine Silica

400 kgs


a) Micro/Fume/Colloidal Silica and/or

30 kgs

b) Metallic Alloys of Aluminium, Silicon and Magnesium and/or

c) Phenolic Resin

3 Miscellaneous items:

a) Mould and Mould Liners Upto 16% of CIF value.

C464 Alumina Carbon/ Slide Gate Plate Refractory and Attachments

b) Cutting Tools

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a),(b) in item No. 3 should not be allowed.


a) Calcined Alumina (Alumina 80% and above) and/or

1110 kgs

C465 Alumina Fused Cast Refractories

b) Zircon and/or Zirconia Bubbles/ OR 935Kg.s

C92

Grains(Zirconium Oxide 80% and above) OR Baddelyet (containing Zirconium Oxide 95% and above).


a) Graphite Electrode and/or 80 kgs

b) Graphite Moulds and/or

c) Cutting Tools

1000 Kgs 1 Major Raw Materials comprising of:

a) Dead Burnt Magnesite(Magnesium Oxide 92% & above) and /or i)Sea Water Magnesia (Magnesium Oxide 94% and above)and/or

500 Kgs

1 b) Chromite(Chromium Oxide 40% minimum)and/or i)Mag Chrome Co-clinker (Magnesium Oxide 40% and above)

520 kgs

2 Additives comprising of: a) Micro Fine Chrome Bond and/or b)Sulphates

50 Kgs

C466 Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars.

3 Misc. Items: a)Mould and Mould Liners b)Cutting Tools

Upto 10% of CIF value.

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a),(b) in item No. 3 should not be allowed.

1000 kg 1 Caliberated Iron ore having iron content 67% or above

1500 kg

2 Non coking coal having ash content 12% or less

800 kg

3 Dolomite 45 kg

4 High Alumina refractory bricks 0.5 kg

5 Castable refractory 0.12 kg

6 Briquetting moulds (those having briquetting facility)

0.000066 Nos

C467 Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron)

7 Light diesel oil 0.48 Lts

Note:- The Value of item at Sl.Nos 4,5 & 6 shall not exceed 10% of the CIF Value of the licence.

1 kg 1 Indellite Grade 1

a) Cobalt 1.07 kg/kg content in export product

b) Chromium 1.07 kg/kg content in export product

c) Nozzles Net to Net

2 Indellite Grade 12




C468 Cobalt Base Hard Facing Alloy Wire Rods

3 Indellite Grade 6

C93




1000 kgs 1 Non Alloy Hot Rolled Steel Sheets/ Strips/ Wide Coils

1130 kgs

2 Rolling Mill Rolls 1.25 kgs

3 Rolling Oil 0.35 kg

4 Pickling Oil 0.45 kg

5 Steel Strapping 2.0 kgs

6 VCI Rusto - Paper 5.0 Sq.mtr.

7 Zinc *

8 Guard Film *

9 Paints (Ltrs.) *

(a) Primer

(b) Tap Coat

C469 Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/ hoops & Strips/ Wide Coils having Zinc coating of 180 gm per Sq.m @40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq.Mtr. Per litr. As Backer given in EngineeringTable 1.

(c) Backer

* Note : While the quantity of item nos 1 to 6 will remain the same for all thickness of the product, the quantity of items 7 to 9 will be as per the Engineering Table 1 given at end of this product group.

1000 kg 1 Non-Alloy/ Alloy Hot rolled steel strips/ wide coils

1085 kg

2 Rolling Mill Rolls 1.25 kg

3 Rolling oil 0.35 kg

4 Pickling oil 0.45 kg

5 Steel strapping 2.0 kg

C470 Cold Rolled Full Hard/ Cold Rolled Close Annealed (without skin passed/ temper passed) Non-Alloy/Alloy Steel (excluding Stainless Steel) Sheets/ Hoops and Strips/ Wide Coils 6 VCI Rusto Paper 5.0 sq. mt

1000 kgs 1 Hot Rolled Non-Alloy/ Alloy steel strips/ wide coils

1118 kgs


3 Rolling oil 0.35 kg

4 Pickling oil 0.45 kg

5 Steel strapping 2.0 kgs

C471 Cold Rolled Close annealed (CRCA) Skin Passed/ Temper passed (including Half Hard, Quarter Hard) Non-Alloy/ Alloy Steel (excluding Stainless Steel) sheets/ Hoop and Strips/ Wide coils

6 VCI/Rusto Paper 5.0 sq. mtr

1000 kgs 1 Cold Rolled Non Alloy Steel Sheets/ Strips/ Wide Coils

1050 kgs/1000Kgs. Content in the export product.

C472 Cold Rolled Galvanized/Galvannealed (Plain/Corrugated) Non Alloy Steel Sheets/Strips/Wide Coils.

2 Zinc (in kgs.) *

* Note : While the quantity of item no 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engineering Table 3 given at the end of this product group.

1000 kgs 1 Hot Rolled Non Alloy Steel Sheets/ Strips/ Wide Coils

1118 kgs/1000Kgs content in the export product.


C473 Cold Rolled Galvanized/Galvannealed (Plain/Corrugated) Non Alloy Steel Sheets/Strips/Wide Coils. 3 Rolling Oil 0.35 kg

C94

4 Pickling Oil 0.45 kg

5 Steel Strapping 2.00 kgs

6 VCI Rusto Paper 5.0 Sq.mtr.

7 Zinc (in kgs.) *

* Note : While the quantity of item nos 1 to 6 will remain the same for all thickness of the product, the quantity of item 7 will be as per the Engineering Table 3 given at the end of this product group.The existing Engg. Table 3 shall be substituted by the Engg. Table annexed with this public notice.

C474 Electrolytic Tin Plate 1 kg 1 Mild Steel Cold Rolled Wide Coil (Black Plate in Coil)

1.006 kgs

Note : This norm is made effective retrospectively from 06.11.2002.

1000 kg 1 Chrome Ore (containing 40% Minimum Chromite)

1320 kgs

2 LAM Coke/Raw Petroleum Coke/Australian Char/Anthracite Coal

1063.94 kgs

3 Carbon Electrode/Paste 84 kgs

4 Limestone 4000 kgs

5 Furnance Oil/LSHS/HFO 3000 kgs

C475 Ferro Chrome containing by weight minimum 60% Chromium and maximum 1.5% Carbon produced by Silico Thermic Reduction Process

6 Lubricating/Gear Oil 16.76 kgs

1000 kg. 1 Chrome Ore Lumps/ Briquettes/ Pellets

1200 kg

2 LAM coke/ Raw petroleum coke/ Australian char/Anthiacite Coal(with fixed Carbon 88% Minimum & Ash content 6% maximum)/ Non Coking Coal

750 kg

3 Carbon electrode/ paste 35 kg

4 Furnace oil/ LSHS/HFO * 1200 kg

C476 Ferro Chrome/ Charge Chrome containing by weight more than 4% Carbon

5 Lubricating/ gear oil * 7.0 kg

* For units having captive power plants (D.G. Set).

1000 kg. 1 High grade Manganese ore 1200 kg

2 Lam Coke/ Raw Petroleum Coke/ Australian Char/ Anthracite Coal (with fixed Carbon 88% minimum and Ash content 6% maximum)/ Non Coking Coal

750 kg

3 Carbon Electrode/ paste 20 kg

4 Furnace Oil/ LSHS/ HFO * 850 kg

C477 Ferro Manganese (Fe Mn)

5 Lubricating/ gear oil * 6.0 kg


1000 kg 1 Molybdic Oxide/Roasted Molybdenum Ore (Molybdenum 55-60%)

1104 Kgs

2 Ferro Silicon (Silicon 75-80%) 421 kgs

C478 Ferro Molybdenum (60-65% Molybdenum

3 Aluminium Ingot/Powder 43.21 kgs

C479 Ferro Silicon (Fe Si)

1000 kg. 1 LAM Coke/ Raw Petroleum Coke/ Australian Char/ Anthracite Coal (with fixed Carbon 88% minimum and Ash content 6% maximum)/ Non Coking Coal

1400 kg

C95

2 Carbon Electrode/ paste 65 kg

3 Furnace oil/ LSHS/ HFO * 2400 kg

4 Lubricating/ gear oil * 15 kg


C480 Ferro Vanadium (50-55% Vanadium)

1000 kg 1 Vanadium Pent- oxide (50-60% Vanadium)

1022 Kgs

C481 Ferro Vanadium (75-80% Vanadium)

1000 kg 1 Vanadium Pent- oxide (50-60% Vanadium)

1610 Kgs

1000 kgs 1 i)Copper Cathode/Copper Wire Bar/Copper Rods (if copper is present in the export product)

0.04 kg

ii)Copper Plates/Micro alloyed copper plate (for use in copper lined casting moulds)

0.1 kg

iii)Zinc 40 kgs

iv)Furnace Oil/LSHS/Naptha 13 kgs

2 MAJOR INPUTS:

a)Non-Alloy Steel Melting Scrap 330 kgs

b)Pig Iron 31.774 kgs

c)Low silica lime Stone 620 kgs

d)Coking Coal OR

1000 kgs

Metallurgical Coke 700 kgs

3 i)ADDITIVES:

a) Cored wires/scraps/ shots/ ingots of aluminium

1.466 kgs

b) Ferro Niobium 0.035 kg

c) Ferro Vanadium 0.004 kg

d) Ferro Silicon/Ferro Manganese/ Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide sinter/Ferro Nickel/charge chrome provided the alloying element(s) is/are actually present in the export product.

17.000 kgs

e) Calcium Silicide (CaSi) 1.5 kg

f)Raw Petroleum Coke 2.3 kgs

3 ii)Miscellaneous Items:

i)Silicon Carbide Grains 2.0 kgs

ii)Rolls/Tungsten Carbide rings for Rolling Mill

1.77 kgs

iii)Celox Inserts/Oxygen measuring probes

0.004 kg

iv)Thermodynamic elements 0.325 kg

v)Magnesia Reagent/ Desulphurisation Compound

0.006 kg

vi)Silica Gel/Mobile Sorbead 0.010 kg

vii)Freon Gas-142/114(Net of Cylinders)

0.010 kg

C482 Cold Rolled Galvanised Non Alloy Steel Sheets/hoops & Strips/Wide Coils.

viii)Stainless steel Hoses 0.007 kg

C96

ix)Shear Blades/Saw Blade 0.010 kg

x)Oxygen Lance Pipe 0.750 kg

xi)Rolling Mill Oil 0.500 kg

xii)Casting Powder 2.083 kgs

xiii)Temperature Tips 0.022 kg

xiv)Canned Elements/Pearmeable elements for combined blowing

0.200 kg

xv)Graphite electrodes (only those having VADR facilities)

1.000 kg

xvi)Welding flux 8.00 kgs

xvii)Weld wire 4.00 kgs

xviii)Surface protection film 13.30 kgs

xix) Refractory Bricks/ Shapes and/or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Bricks/ Shapes

9 kgs

xx) Monolithic Refractory viz. Castables, Gunning Mass & Ramming Mass and/or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Monolithic Refractory

5 kgs

xxi) Specialty Refractories namely Continuous Cast Refractories (such as Shrouds, Mono Block Stoppers and Sub-Entry Nozzles), Slide Gate Refractories, Porous Plug, Zircon/ Zirconia Nozzles and Tundish Nozzles

1 kg

Note 1. The above norm is applicable only if the export product(s) is manufactured through Blast Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 2. Items at Sl.Nos. 3(i) (b & c) would bepermitted only if the Alloying Elements, viz. Niobium and Vanadium is present in the export product.

1000 kgs. 1 Calibrated Iron Ore and Iron Pellets

1500Kgs.

2 Iron Ore Pellets 300 kgs

3 Liquified Petroleum Gas OR Furnace Oil

86 kgs 111 kgs

4 Reformer Catalyst (Alumina Magnesia based Nickel Catalyst)

0.070 Ltr

5 Briquetting Moulds (only for those having Briquetting Facilities)

0.0004 No.

6 Refractories(80% Alumina Bricks and Castables)

0.4 kg

7 Dead Burnt Magnesite (Magnesium Oxide 87% and above)

5 kgs

8 Zinc Oxide 0.070 Ltr.

C483 Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron)

9 Potassium Carborate 0.17 kg.

C97

10 Glycine

11 Vanadium Pentoxide

12 Diathanolamine

13 Resin 0.014 Ltr.

14 Tri-sodium Phosphate 0.008 kg

15 Water Treatment Chemicals 0.05 kg.

2 a) Natural Gas/LNG 290SCM/213Kg respectively.

b) Propane OR Naptha upto 20% within the total quantity of natural gas/LNG OR upto 5% within the total quantity of natural gas/LNG

1) Natural Gas/LNG 180SCM/132 Kg respectively

2) LPG or Furnace oil/Naptha 91Kg. Or 108Kgs.

MISC. ITEMS CONSITING OF:-

3 a) Reformer Catalyst (Alumina Magnesia based Nickel Catalyst),

b) Briquetting Moulds & High temerature Grease (only for those having Briquetting facilities)

c) Refractories (80% Alumina Bricks nd Castables),

d) Dead Burnt Magnesite (Magnesium Oxide 87% and above), Zinc Oxide, Potassium Carbonate, Glycine, Vanadium Opentaoxide, Diathanolamine, resin, Tri-sodium Phosphate, Water Treatment Chemicals,

e) Nickel-chromium based reformer tubes

f) Nickel -Chromium based Heat recovery tube Bundles.

Note : 1 Quantum of Iron Ore Pelletws under S.No. 1 shall be limited to 70% of the total permitted quantity. General note No. 7 shall not apply in respect of Furnace Oil in S.No. 2(ii) since it is a process necessity.Import of LNG, Propane, Naphtha, LPG and Furnace Oil at S.No. 2 shall be allowed to only such Gas based directed reduced iron producers who has installed facilities to use these fuels.Item at S.No. 3(d) shall be allowed only to Gas based DRI producers following HYL-III technology. 2. Import item No 3 (a) to 3 (f) in total (Misc. item) are allowed up to 4% of the FOB value of export.

C484 Deleted

1 kg 1 Electrode grade Calcined Petroleum Coke/ Pitch Coke

1.300 kg

2 Special Impregnating pitch 0.400 kg

3 Coal Tar Pitch 0.383 kg

C485 Graphite electrode/ Carbon electrode/ Anodes/ Nipples/ Graphite Fine and Mix Graphite Products

4 Furnace Oil 0.489 Ltr


C486 High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars

a) Bubble and/or Fused Alumina (Alumina 90% and above) and/or

1050 kgs

C98

i)Reactive Alumina


Alumino Silicate Powder and/or Metallic Alloys of Aluminium Silicon and Magnesium OR

200 kgs

2 a) Micro/ Fume/ Colloidal Silica 180 kgs


a) Mould and Mould Liners Upto 11% of the CIF value.

b) Cutting Tools



a) Fused and/or Sintered Alumina/Mulite (Alumina more than 73%) and/or i) Reactive Alumina (Alumina more than 73%) and/or

850 kgs

b) Graphite(Fixed Carbon 85% Minimum) and/or i) Pitch Pellet (more than 60% Fixed Carbon)

200 kgs


a) High Alumina Cement/Binder and/or

180 Kgs

i) Micro/Fume/Colloidal Silica and/or ii) Aluminium Silicate Powder and/or iii) Metallic Alloys of Aluminium, Silicon, Magnesium and/or iv)Sodium Hexameta Phosphate



C487 High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars

b) Cutting Tools



a) Andalusite and/or i)Calcined and/or Fused and/or Reactive Alumina

1400 kgs


a) Micro/ Fume Colloidal Silica and/or i)Sodium Hexa Metaphosphate and/or ii)Metallic Alumina

160 kgs

3 Miscellaneous Items: Upto 18% of CIF value.

a) Mould and Mould Liners

C488 High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars

b) Cutting Tools

C99



a) Andalusite (Aluminium Oxide 50% and above) and/or i)Calcined Bauxite (Aluminium Oxide 50% and above)

1020 kgs


a) High Alumina Cement/Binders and/or Ligno Sulphate OR Micro/ Fume/ Colloidal Silica

270 kgs 180 kg



C489 High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars

b) Cutting Tools


C490 High Alumina Refratory for Hearth

1 No. 1 Syntered Alumina Tiles Net to Net

1 MT 1 High Carbon Ferro Chrome (Cr. 65%)

523 kgs

2 Ferro Molybdenum (MO) (65-70%)

47 kgs

3 Ferro Silicon (Si) 75% minimum 29 kgs

C491 High Chrome Castings for Cement Grinding Mills (Composition: Cr.30-32%, Moly- 2.5- 3%, Si 1.5-2.5% and C- 1.5-2.5%, Balance - Iron) 4 Non-Alloy Steel Scrap 479 kgs

1000 kg 1 Ferro Molybdenum *

2 Ferro tungsten **

3 Ferro Vanadium ***

C492 High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products

4 Cobalt metal ****

* 3330 X (mean average of % Modybdenum in steel devided by mean average of % Modybdenum in Ferro Molybdenum) ** 3330 X (mean average of % Tungsten in steel divided by mean average of % Tungsten in Ferro tungsten) *** 3330 X (mean average % Vanadium in steel divided by mean average of % Vanadium in Ferro Vanadium) **** 33 X (mean average of % cobalt in steel)

1000 kg. 1 Ferro Molybdenum *

2 Ferro Tungsten **

C493 High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products

3 Ferro Vanadium ***

* 3330 x (mean average of % Molybdenum in steel) ( mean average of % Molybdenum in ferro Molybdenum) ** 3330 x (mean average of % Tungsten in steel) (mean average of % Tungsten in ferro tungsten) *** 3330 x (mean average of % Vanadium in steel) (mean average of % Vanadium in Ferro Vanadium)

C494 Hot Metal/Pig Iron 1000 kgs 1 i)Iron ore/Iron Ore concentrates/ Iron ore pellets having 65% or

1500 kgs

C100

more iron

ii)Metallurgical Coke OR

700 kgs (without PCI)

Metallurgical Coke OR

500 kgs (with PCI)

Coking Coal OR

1000 kgs (without PCI)

Coking Coal 800 kgs (with PCI)

iii)*PCI Coal for plant having PCI injection system

200 kgs

iv)Coke Breeze 20 kgs

v)Limestone 200 kgs

vi)Dunite 50 kgs


i)Silicon Carbide grains 2 kgs

2 ii)Alumina/Graphite/ Carbon Refractories

0.33 kg

1 Tonne 1 Slabs of relevant grade of Non-alloy/ Alloy/ Stainless Steel OR

1030 kg

Ingots of relevant grade of Non-alloy/Alloy/ Stainless Steel

1050 kg

2 CI/ Steel Rolls for Hot Rolling Mill

0.60 kg (if input is slab) 1.20 kg (if input is ingot)

3 Steel Shots 5.5 kg

4 Relevant Shear Blades/ Saw Blades

0.01 kg

5 Relevant Fuel (for fuel fired re-heating furnace)

261000 K. Cal.

C495 Hot Rolled Non-alloy/Alloy/Stainless Steel Sheets/ Strips/Wide Coils

6 Relevant Fuel for electric power for hot rolling mill & auxiliaries (for units with captive power plant / source only

217500 K. Cal.

Note 1. The quantity of fuel for power generation (i.e 217500 K. Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2. The quantity of fuels (in K. Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K. Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K.Ltr.) may be worked out by dividing the K.Cal. Figures given in the SION by the actual unit heat value of the imported fuel.

1000 kgs. 1 Iron Ore/Iron Ore concentrates/Iron Ore Pellets having 65% or more iron

1500 kgs

2 Low Ash Metal-lurgical Coke (with Ash content below 15%) OR Coking Coal (with Ash content below 12%)

700 kgs OR 1000 kgs.

Coking Coal (with Ash content below 12%)

1000 kgs

C496 Industrial/ Sanitary Iron Castings (Blast Furnace Route)

3 Limestone 300 kgs

C101

4 Manganese Ore 90 kgs

5 Dolomite 80 kgs

6 Oxygen Lancing Tube 10 Mtrs.

1000 Kgs 1 Lime Stone/Dolomite 35 Kgs

2 Bentonite 5 Kgs

3 Grinding Media 0.4 Kg

C497 Iron Ore pellets (from Limonite Ore)

4 Furnace Oil 40 Kgs

1000 kgs. 1 Iron Ore Fines 1000 Kgs

2 Lime Stone/ Dolomite 29 Kgs

3 Bentonite 5 Kgs

4 Chromium based grinding media having 10-18% chromium content in the steel balls of different diameters

0.4 Kg

5 Furnace Oil 37 Kgs

C498 Iron Ore Pellets. (from Haematite Ore)

6 Flocculent 0.0017 kg

1000 Kgs 1 Major Raw Materials comprising of: a)Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or i) Sea Water Magnesia (Magnesium Oxide 94% and above) and/or ii) Fused Magnesia (Magnesium Oxide 94% andabove)

1020 Kgs

b) Natural Graphite (Fixed Carbon 85% Minimum)

20 Kgs

2 Additives comprising of : a) Phenolic Resins and/or i) Metallic Alloys of Aluminium, Silicon, Magnesium.

120 Kgs

C499 Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars

3 Miscellaneous Items: a) Mould and Mould Liners b) Cutting Tools

Upto 10 % of CIF value.



a) Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or i)Sea Water Magnesia (Magnesium Oxide 94% and above) and/or

600 kgs

b) Magdolo Co-clinker(Magnesium Oxide 40% and above)

450 kgs

2 Additives comprising of: Pitch Coke/ Tar Pitch

190 kgs



C500 Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars

b) Cutting Tools


C102

1000 Kgs 1 Major Raw Materials Comprising of : a) Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or i) Sea Water magnesia (Magnesium Oxide 94% and above) and/or ii) Fused Magnesia (Magnesium Oxide 94%and above)

1040 Kgs

2 Additives comprising of : a) Phenolic Resins and/or i)Ligno Sulphate and/or ii)Pitch Coke/Tar Pitch

40 Kgs

C501 Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars

3 Misc. Items: a) Mould and Mould Liners b)Cutting Tools

Upto 10% of CIF value.


1000 kgs. 1 a) Major Raw Materials comprising of: i)Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or ii)Sea Water Magnesia (Magnesium Oxide 92% and above) and/or iii) Chromite (Chromium Oxide 40% Minimum)

700 kgs

b) Mag Chrome Co-clinker and/or i) Magnesium aluminium Co-clinker or Magnesia Lime Co-clinker (Magnesium Oxide 40% minimum)

350 kgs


a) Micro Fine Chrome Bond and/or 50 kgs

b) Mettalic Alloy of Aluminium, Silicon, Magnesium

3 Misc. Items:


C502 Magnesite Chrome/Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars

b) Cutting Tools


1000 kgs 1 Ferro Silicon 885 kgs.

2 Magnesium Metal 100 kgs.

3 Ferro Silicon Calcium 50 kgs.

C503 Magnesium Ferro Silicon

4 Misch Metal (containing rare earths : 98% minimum)

25 kgs.

Note: For import item No.4 prior permission from the Deptt.of Atomic Energy shall be obtained and submitted by the applicant alongwith the application for advance licence/ DFRC.

1000 kg 1 Wire rod of relevant grade of Steel OR


1 a) Billets/ Blooms of relevant grade of steel


b) CI/Steel Rolls/ Tungsten Carbide Rings/ Rolls for Rolling Mill

0.62 kg

C504 Non Alloy/ Alloy Steel Coated/ Plated Wires

c) Furnace Oil for captive oil fired re-heating Furnace

30 kg

C103

2 Dry Drawing Lubricant/ Coating 8 kg

3 Tungsten Carbide dies 5 Nos.

4 Wet Drawing Lubricant 4 kg..

5 Plastic/ Steel Bobbins/ Spools Net to net.

6 Relevant Metal for coating/ Plating

45 kg

7 Lead (for Patenting) 3 kg

Note: Import of items at Sl. No.4 shall be allowed against export of wet drawn steel wires of size below 1.6mm only.

1 kg 1 Non alloy hot rolled Steel Sheets/ Coils

1.05 kg C505 Hot Rolled Galvanized Non alloy steel Sheet/hoops & Strips/Wide Coils

2 Zinc 0.04 kg

1000 kgs 1 a) Copper scrap/Ingots (if copper is present in the export product)

0.04 kg

b) Zinc 40 kgs

c) Lead 3.3 kgs

d) i)Furnace Oil (only for units with captive power plants)

30 kgs

ii)Lubricant (only for units with captive power plant)

0.65 kg

1 e) i)Furnace oil for oil fired reheating furnace in rolling mill

50 kgs

ii) Furnace oil for ladle heating 6 kgs

1 f) Cored wire of lead/lead shots (in case of export of lead bearing free cutting steel sheet only)

2.5 kgs

2 MAJOR INPUTS :

a) Non Alloy steel Melting scrap/Direct Reduced Iron (HBI/Sponge Iron)

360 kgs

b) Low Silica Lime Stone 218 kgs

c) Metallurgical Coke 610 kgs

3 i)ADDITIVES

a) Cored wires/lumps/powder 1 kg

of Calcium Silicide (CaSi)

b) Silico Manganese OR

16 kgs

i) Ferro Silicon 6 kgs

ii) Ferro manganese 10 kgs

c) Raw Petroleum coke 5 kgs

d) Cored wires/scrap/ingots/ shots of aluminium

1 kg

ii)MISC. ITEMS:

a)Graphite Electrode 6 kgs

b)Rolls/Tungsten Carbide rings for rolling mill

1.77 kgs

C506 Non alloy steel Galvanised wire

c)Copper lined mould/ Copper mould for casting

0.013 kgs

C104

d)Saw/Shear Blade 0.01 kg

e)Ceramic coated lancing pipe 0.25 No.

f)Temperature Tips/Celox inserts 0.05 No.

g)Sampler tips 0.05 No.

h)Submerged tuyers/ Oxygen lance pipe /Oxygen Super Sonic lance /tip.

0.77 kgs

i)Atmospheric injector 4 kgs

j)Casting Powder 2 kgs

k) Silica Texture bellow Shroud 0.0052 kg

iii)WIRE DRAWING MISC. ITEMS:

a)Dry drawing lubricant 8 kgs

b)Wire drawing soap 7 kgs

c)Wet drawing lubricant 4 kgs

d)Tungesten carbide dies 5 Nos.

e)Plastic bobbins/spools 300 Nos.

iv)REFRACTORY ITEMS: 10 Kg

a)Runner Mass/castable for Mini Blast Furnace (MBF)

b)Graphite Carbon refractories for Mini Blast Furnace (MBF)

c)Magnesia reagent/ Desulphurisation compound

d)Zirconia /Magnesia Nozzles

e)Aluminium Graphite Nozzles/Monobloc Stopers/Stoper heads/ Stoper Rods/Shrouds

f)Porous Plugs/seat Blocks/Sleeves/Slide Gate Plates

g)Direct Bonded basic Bricks

h)EBT Tube/Mass/Bricks

i)Monolithic/Gunning/ Ramming Mass/Castables

j)Dolomite Magnesia Carbon Bricks

Note 1. The above norms is applicable only if the export product(s) is/ are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace. 2. Import of item atSl.No.3 (iii) (c), (d) and (e) shall be allowed against export of wire of size below 1 mm dia only.Import of Directo Reduced Iron shall be limited to 10% of total metallic input of 360Kg. Mentioned at item 2(a).

1000 kgs 1 Major Inputs comprising of:

a) Non Alloy Steel Melting Scrap 1200 Kgs


2 Additives comprising of :

a) Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi)

C507 Non alloy steel Galvanised Wires (From melting scrap)

b) Silico Manganese

C105

Or (i) Ferro silicon (ii) Ferro manganese

c) Raw Petroleum Coke 22.46 kgs

d) Cored wires/ Scrap/ Ingots/ Shots of aluminium

e) Copper scrap/ Copper Cathode/Copper wire Bar/Copper Rod (If copper is actually present in export product)

0.04 kgs

f) Cored Wires of lead/ Lead Shots.(in case of export of lead bearing free cutting steel only)

2.5 kg


a) Graphite Electrode

b) Rolls/ Tungsten Carbide Rings for Rolling mill

c) Copper lined moulds for casting 20 kg

d) Saw/ Shear Blade

e) Ceramic coated lancing pipe

f) Temperature Tips

g) Sampler Tips

h) Refractory items, comprising of:

1) Zirconia/ Magnesia Nozzles

2) Aluminium-Graphite Nozzles/ Monoblock Stoppers/ Stopper head/Stopper Rods/ Shrouds

3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates

4) Direct Bonded basic Bricks

5) EBT Tube/ Mass/ Bricks

6) Monolithic/ Gunning/ Ramming Mass/ Castables

7) Dolomite Magnesia Carbon Bricks

8) Ladle inner Nozzles/ collector Nozzles

3 i) Casting Powder

4 Wire drawing and galvanising Misc. Items:

a) Dry drawing lubricants

b) Wire drawing soft

c) Wet drawing lubricants 37.7 kgs

d) Tungston carbide dies

e) Plastic bobbins/ Spools

f) Zinc 40 kgs

g) Lead 3.3 kgs

5 Energy sources comprising of:

a) (i) Furnace Oil (only for Units with captive power Plant)

70 kgs

C106

a) (ii) Lubricant (only for units with captive power Plant)

0.65 kgs.

5 b) (i) Furnace oil for oil-fired Reheating Furnace in Rolling Mill.

50 kgs

b) (ii) Furnace oil for Ladle heating 6 kgs.

1. The above norms is applicable only if the export product(s) is/are manfactured through Electric arc furnace/ Induction furnace route using steel melting scrap as basic raw material. 2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed. 3. Import of item at Sl.No 4(c)(d)(e) shall be allowed against of export of wire below 1mm dia only. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.

1000 kgs 1 a) Copper Scrap/Copper Cathode/Copper Wire Bar/Copper Rod (if copper is present in the export product)

0.04 kg

b) Energy Sources/Fuels (Natural Gas/LNG, NGL (Condensate/gaseous), Naptha, HSD Oil, Furnace Oil) (only for plants having captive power plant with facilities installed for use of specific energy sources/fuel)

2626330K. Cal

c) Energy Sources/Fuels (Natural Gas/LNG,NGL (condensate/gaseous), Naptha, High Speed Diesel Oil, Light Diesel Oil, Furnace Oil)(for re-heating furnace in rolling mills, ladle heating and tundish pre-heating)

565670 K Cal.

NGL for re-heating furnaces in rolling mills, ladle heating and tundish pre-heating (only for plants having facilities installed for the use of this fuel)

56 kgs

2 MAJOR INPUTS :

a)Non-Alloy Steel Melting Scrap/Direct reduced iron (sponge iron/Hot Brequitted Iron)/ Pig Iron

1111 Kgs.

b)Lime Stone 200 kgs

3 i)ADDITIVES :

a)Cored wires/lumps/ powder of Calcium Silicide (CaSi)

1 kg

b)Silico Manganese OR

13 kgs

i)Ferro Silicon 3 kgs

ii)Ferro Manganese 10 kgs

c)Raw Petroleum Coke /Calcined Petroleum Coke/Metallurigical Coke/Coke Breeze

5 kgs

d)Cored Wires/Scrap/ Ingots/Shots of Aluminium

1 kg

e)Dolomite 40 kgs

C508 Hot Rolled Non Alloy Steel Plates/Sheets /hoops & Strips. (including skelp)/ wide Coils through DC arc Furnace Route (for open Cycle Operation).

f)Ferro Titanium/ Ferro 3 kgs

C107

Vanadium/ Ferro Phosphorous/ Ferro Aluminium/ Ferro Chrome/Ferro Boron/Ferro Niobium(if these are actually present in the export product)

3 ii)MISC. ITEMS:


b)Rolls for Rolling Mill 1.2 kgs

c)Copper lined Moulds for casting

0.013 kg

d)Saw/Shear Blade 0.1 kg

e)Ceramic coated lancing pipe 0.02 No.

f)Temperature Tips 0.1 No.

g)Sampler Tips 0.5 No.

h)Casting Powder 2 kgs

i)Fluorspar/Mould Flux 1.5 kgs

j)Oxygen/Sampler probes 0.002 No.

k)Rolls for Caster 0.5 kg

l)Hydraulic Oil/ Lubricating Oil 1.7 kgs

m)Transformer Oil 0.59 kg

3 iii)REFRACTORIES :

a)Zirconia /Magnesia Nozzles

b)Aluminium Graphite Nozzles/Monobloc Stopers/Stoper heads/Stoper Rods/Shrouds

c)Porous Plugs/seat Blocks/Sleeves/Slide Gate Plates

d)Direct Bonded basic Bricks

e)EBT Tube/Mass/Bricks

f)Monolithic/Gunning/ Ramming Mass/Castable

g)Dolomite Magnesia Carbon Bricks

25.8 kgs

h)Ladle inner Nozzles/ collector Nozzles/ Nozzle filling Mass/ Refractory Nozzles

i)Reheating Furnace Refractories

j)Black Refractories

k)Roof Refractories

l)Tundish Refractories

m)Tundish Gunning Mass

n)Tundish Powder

o)Purging Refractories

Note 1.This norm is applicable for export product manufactured through DC Electric Arc Furnace Route for open cycle operation. Note 2. Items at Sl.No. 3(i) (f) i.e. Ferro-Titanium/Ferro Phosphorous/Ferro Chrom/Ferro Boron/Ferro Niobium will be allowed if these are actually present in the export product. Note: 3 Import of either one or a combination of the energy sources /fuels mentioned against Sr. Nos. 1 (ii)

C108

& 1 (iii) shall be permitted within the overall calorific value, subject to further actual user condition. Note : 4 Quantity of specific fuel (s) in kgs/Cubic meter/K.ltr shall be obtained by dividing the K.Cal figure by the net calorific value/heal value of the fuel (s) detailed below:-Net Caloric values of fuels 1. Natural Gas -8400K.Cal/Cubic Mtr. 2. LNG-11436K.Cal/Kg 3. Naptha-10610K.Cal/Kg 4. NGL-10610K.Cal/Kg 5. LDO-10060K.Cal/Kg 6. F.O.-9790K.Cal/Kg 7. HSD-10230K.Cal/Kg Note : 5. Deleted Note : 6 Import of Direct Reduced Iron shall be allowed up to 90% of the total metallic input of 1111 kgs Note : 7 Import of Pig Iron may be allowed upto 10% of the total metallic input of 1111 kgs.

C509 Non alloy Steel Plates 1 kg 1 Non alloy Steel Slabs 1.10 kg

1000 kgs 1 Wire rod of relevant grade of steel

1030 kgs

2 Dry Drawing Lubricant/ Coating 8 Kgs

3 Tungsten Carbide Dies 5 Nos.

4 Wet Drawing Lubricant 4 kg.

C510 Non Alloy/ Alloy Steel (Excluding Stainless Steel) Wires (Uncoated)

5 Plastic/ Steel Bobbins/ Spools Net to net.

Note: Import of Items at Sl.No. 4 shall be allowed against export of wet drawn steel wires of size below 1.6mm only.

1000 Kgs 1 Calibrated Iron Ore with 65% and more Iron content

(a) 690 Kg for stainless steel (b) 1250 Kg for other steel

2 Non alloy steel melting scrap (a) 200 Kg for stainless steel (b) 360 Kg for other steel

3 Liquefied Petroleum Gas 76 Kgs

4 Reformer catalyst 0.06 Lts

5 Briquetting moulds 0.0006 Nos

6 Non coking coal (with ash content less than 12%)

850 Kgs

7 Graphite Electrode 6 Kgs

8 Cored wire/ lumps/ powder of calcium silicide (CaSi)

1Kg

9 Rolls/Tungston Carbide rings for rolling mills

1.77 Kgs



(Qty. in Kgs as in formula 1 of note 7)

11 a) Ferro Silicon (Qty. in Kgs as in formula 2 of note 7)

b) Ferro Manganese (Qty. in Kgs as in formula 3 of note 7)

12 Refractory comprising of : a) Zirconia/magnesia nozzles

(i)10 Kgs for non alloy steel

b) Aluminium Graphite nozzles/monoblock stoppers/stopper heads/stopper rods/shrouds

(ii)25 Kgs for stainless steel

C511 Non alloy/ Alloy/ stainless steel Bars and Rods (including Rounds, flats, Hexagon, octoagon, wire rod, cold twisted deformed bars, thermo-mechanically treated reinforcing Bars etc.) Angles, Shapes and Sections (including Beams, Joists,Channels Special Profiles etc. ) Plates/ sheets/ strips/ wide coils/ Blooms/ Billets/ Slabs and Ingots

c) Porous plugs/ seat blocks/ (iii)15 Kgs for alloy

C109

sleeves/ slidegate plates steel other than stainless steel


e) EBT tubes/Mass/Bricks

f) Monolithic/gunning/ramming mass/castables

g) Dolomite/magnesia carbonbricks

13 Other Ferro alloys including nickel oxide, sinter, ferro nickel, charge chrome provided the alloying element(s) is/ are actually present in the export product.

(Qty. in kgs. as in formula 4 of Note 7 below)

14 Casting Powder 2 Kgs

15 Saw/Shear blade 0.01 Kgs

16 Copper scrap/Copper Cathode/Copper Wire Bar/Copper Rod (if copper is actually present in the steel)

0.04 Kgs

17 Furnace oil (for captive power plant)

70 Kgs


50 Kgs

19 Furnace oil for ladle heating 6 Kgs

20 Lubricant/Gear oil (for captive power plant)

0.65 Kgs

21 Low silica Lime Stone 100 Kgs

22 Cored wire/scrap/ingot of aluminium

1 Kg

23 Cored wire of lead/lead shots (in case of export of lead bearing steel only)

2.5 Kgs

24 Raw Petroleum Coke 5.0 Kgs

25 Ceramic coated lancing pipe 1 Nos

26 Temperature Tips 0.5 Nos

27 Sampler Tips 0.25 Nos

1. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.2. The above norms are applicable only if the export product(s) is manufactured through Gas/Coal based sponge iron-Electric Arc Furnace/ Induction Furnace route using iron ore as the basic raw material 3.The item at Sl. No.(6) would not be allowed If export product(s) are manufactured through gas based sponge iron route and the items at Sr. No.(3) (4) & (5) would not be allowed if export product(s) are manufactured through coal based sponge iron route 4. In case of export product(s) manufactured through induction furnace route, the item at Sr.No.(7)will not be allowed.5. In case of continuous cast billtes/blooms/slabs produced through continuous casting route, rolling mill rolls and Tungsten carbiderolls, item at Sl.No.(9) will not be allowed. Similarly, against export of rolled blooms, billets, slabs, refractories item at Sl.No. 12(a)(b)(c) shall not be allowed, however, in case of export of rolled produced out of continuous blooms item mentioned above i.e. rolls/Tunsten rings and refractories shall be allowed. Import of item at Sr.No. (9)(10)(12)(a)(b)(14)(15)&(18) shall not be permitted against export of ingots.7)Formula:1) 5.5 x (mean average of % silicon content in Steel)(mean average of Manganese content in Steel)

C512 Non Alloy/Alloy/ 1000 kgs 1 i)Copper Cathode/Copper Wire Bar/Copper Rods (if copper is

0.04 kg

C110

present in the export product)

ii)Copper Plates/Micro alloyed copper plate (for use in copper lined casting moulds)

0.1 kg

iii)Furnace Oil/LSHS/Naptha 13 kgs

2 MAJOR INPUTS:

i)Non-Alloy Steel Melting Scrap 330 kgs

ii)Pig Iron 31.774 kgs

iii)Low silica lime Stone 620 kgs

iv)Coking Coal OR Low Ash Metallurgical Coke (LAM Coke)

1000 kgs, 700Kgs.

Metallurgical Coke 700 kgs

3 i)ADDITIVES:

a) Cored wires/scraps/ shots/ingots of aluminium

1.466 kgs

b) Ferro Niobium 0.035 kg

c) Ferro Vanadium 0.004 kg

d) Ferro Silicon/ Ferro Manganese/ Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide Sinter/Ferro Nickel/Charge chrome provided the alloying elements is/are actually present in the export product.

17.00 kgs

e) Calcium Silicide (CaSi) 1.5 kg

f)Raw Petroleum Coke 2.3 kgs

3 ii) MISC.ITEMS:

a)Silicon Carbide Grains 2.0 kgs

b)Rolls/Tungsten Carbide rings for Rolling Mill

1.77 kgs

c)Celox Inserts/Oxygen measuring probes

0.004 kg

d)Thermodynamic elements 0.325 kg

e)Magnesia Reagent/ Desulphurisation Compound

0.006 kg

f)Silica Gel/Mobile Sorbead 0.010 kg

g)Freon Gas-142/114(Net of Cylinders)

0.010 kg

h)Stainless steel Hoses 0.007 kg

i) shear Blades/Saw Blades 0.010 kg

j) Oxygen Lance pipes 0.750 kg

k)Rolling Mill Oil 0.500 kg

l)Casting Powder 2.083 kg

m)Temperature Tips 0.022 kg

n)Canned Elements/Pearmeable elements for combined blowing

0.200 kg

Stainless Steel Bars & Rods (including Rounds, Flats, Hex- agons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechnically treated reinforcing Bars) Angles, Shapes and Sections (including beams, Joists, Channels, special profiles), Plates Sheets/Strips/wide Coils, Blooms, Billets, Slabs, Ingots, wires, pipes and tubes, Skelp, Rails and Sleeper

o)Graphite electrodes (only those having VADR facilities)

1.000 kg

C111

p)Welding flux 8.0 kgs

q)Weld wire 4.0 kgs

r)Surface protection film 13.3 kgs

s)Copper lined mould for casting 0.013 kg

t) Refractory Bricks/ Shapes and/or Dead Burnt/ Sea Water/ Fused Magnesia for Captive use for manufacture of Bricks/ Shapes

9 kgs

u) Monolithic Refractory Viz. Castable, Gunning Mass & Ramming Mass and/ or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Monolithic Refractory

5 kgs

v) Special Refractories namely, Continuous Cast refractories (such as Shrouds, Mono Block Stoppers and Sub-entry Nozzles), Slide Gate refractories, Porous Plug Zircon/ Zirconia Nozzles and Tundish Nozzles

1 kg

Note 1.The above norm is applicable only if the export product(s) is manufactured through Blast Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 2. Ferro Niobium and Ferro vanadium would be permitted only if the alloying element namely Niobium and Vanadium is present in the export product. 3. Item of import at Sl.No.1 (ii), 3(ii)(b)(i)(l) (p) (q)(s) and continuous cast refractories and Tundish Nozzles at (v) shall not allowed in case of export of Steel ingots. 4. Item of import at Sl.No.1 (ii), 3(ii), (c), (m) & 3 (iii) (a), (b), shall not be allowed in case of rolled blooms/ billets/ slabs. However, against export of rolled billets made through continuous cast blooms, continuous cast refractories & Tundish Nozzles under 3(ii)(v) shall be allowed. 5. Item of import at Sl.No.3 (ii) (p) and (q) shall be allowed in case of export of pipes and tubes only. The item of import at Sl. No 3 (ii) (r) shall be allowed in case of export of CRGO/CRNGO sheets. 6.The item NonAlloy Steel Melting Scrap will be allowed as per the definition given in section XV of Customs Tariff. 7.The item at Sl. No. 3 (ii)(s) shall not be allowed in case of import of item at Sl.No.1 (ii). Similarly, in case of import of item at Sl.No. 1 (ii), the item at Sl.No.3 (ii) (s) will not be allowed.

1000 kgs. 1 Non Alloy steel Ingots OR

1070 kg

Non Alloy Steel Blooms/ Billets OR

1050 kg

Non-alloy Steel Re-rollable Scrap as per IS: 2549-1994

1070 kg

2 Rolls for rolling mills 1.77 kg

3 Furnace oil for oil fired reheating furnace in rolling mill

50 kg

C513 Non-alloy Steel bars & rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted Bars, thermo mechanically treated reinforcing bars), Angles, Shapes & Sections (including beams, joist, channels, special profiles etc.) and Rails

4 Saw/ Shear blade 0.01 kg

1000 kgs 1 a)Copper Scrap/Copper Cathode/Copper Wire Bar/Copper Rod (If copper is present in the export product)

0.04 kg C514 Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed bars,

b)Cored Wires of Lead/ Lead Shots (in case of export of lead bearing free cutting steel only)

2.5 kg

C112

c)1)i)Furnace Oil (only for Units with captive power plant)

70 kg

ii)Lubricant (only for units with captive power Plant)

0.65 kg

2)i)Furnace Oil for oilfired Reheating Furnace in Rolling Mill

50 kg

ii)Furnace Oil for Ladle heating 6 kgs

2 MAJOR INPUTS:

a)Non-Alloy Steel Melting scrap 1200 kgs

b)Low Silica lime stone 95 kgs

3 i)ADDITIVES:

a)Cored wires/Lumps/Powder of Calcium Silicide (CaSi)

1 kg

b)Silico Manganese OR

15 kgs

i) Ferro Silicon and 5 kgs

ii) Ferro Manganese 10 kgs

c)Raw Petroleum Coke 5 kgs

d)Cored Wires/Scrap/Ingots/ Shots of Aluminium

1 kg

3 ii)MISC. ITEMS:


b)Rolls/ Tungsten Carbide Rings for Rolling Mill

1.77 kgs

c)Copper lined moulds for castings

0.019 kg

d)Shear Blades/ Saw Blades 0.1 kg

e)Ceramic Coated lancing pipe 0.75 kg

f)Temperature Tips 0.022 kg

g)Sampler Tips 0.25 No.

h)Casting Powder 2 kgs

3 iii)REFRACTORIES:

a)Zirconia/ Magnesia Nozzles

b)Aluminium-Graphite Nozzles/ Monoblock Stoppers/Stopper head/Stopper Rods/Shrouds

c)Porous Plugs/Seat Blocks/ Sleeves/Slide Gate Plates

d)Direct Bonded Basic Bricks 10 kgs

e) EBT Tube/Mass/Bricks

f)Monolithic/Gunning/Ramming Mass/castables

g)Dolomite Magnesia Carbon Bricks

Thermomechanically treated reinforcing Bars etc.,) Angles, Shapes & Sections (including Beam, Joists, Channels, Special Profiles etc.) Plates/Sheets/ Strips/ Wide Coils, Blooms/Billets/ Slabs/Ingots.

h)Ladle Inner Nozzles/ Collector Nozzles

Note:1.The above norms is applicable only if the export product(s) is/ are manufactured through Electric Arc Furnace route/ Induction Furnace route using steel scrap as basic raw material. 2. In case of export of continous cast billets blooms/slabs produced through continuous casting route,

C113

rolling mill rolls and tungsten carbide ring i.e. Item at Sl.No.3 (ii) (b) will not be allowed. Similarly, against export of Rolled Blooms, Billets, Slabs, refractory items 3(iii)(a&b) shal not be allowed. However, in case of export of rolled products including billets produced out of continuous cast blooms/ billets both item mentioned above i.e. rolls/ tungsten carbide rings and refractories shall be allowed. 3. Items of import at Sl.No.1 (c) (2), 3 (ii) (b),(c), (d), (h) and 3 (iii) (a&b) shall not be permitted against export of Ingots. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.

1000 Kgs 1 Major Input comprising of:

a) Non Alloy Steel melting scrap/Direct Reduced Iron (HBI/Sponge Iron)

360Kgs.

b) Low Silica lime stone 218 Kg

c) Metallurgical coke (with ash content below 15%)

610Kg.


i) Cored wires/ lumps/ powder of calcium silicide (CaSi)

ii) Silico Manganese OR

a) Ferro Silicon

b) Ferro manganese

iii) Raw Petroleum coke 22.46 Kgs

iv) Cored Wires/ Scrap/ Ingots/ Shots of aluminium

v) Copper Scrap/ Copper Cathode/ Copper Wire Bar/Copper Rod(if copper is actually present in the export product)

0.04 kgs

vi) Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel only)

2.5 kgs

3 a) Refractories and Misc. Items:

i) Graphite Electrode

ii) Rolls/ Tungsten Carbide rings for rolling mill

iii) Copper lined mould for casting

iv) Saw/ shear blade

v) Ceramic coated lancing pipe

vi) Temperature tips/ Celox inserts

vii) Sampler tips

viii) Submerged tuyers/Oxygen lance pipe/Oxygen Supersonic lance/tip.

ix) Atmospheric injector

x) Stainless Steel hoses

xi) Refractory items comprising of:

C515 Non-alloy steel wire (uncoated)

a) Runner Mass for Mini Blast Furnace/ Castable for Mini Blast

C114

Furnace (MBF)

b) Graphite Carbon refractories for Mini Blast Furnace (MBF)

27 Kg

c) Magnesia reagent Desulphurisation compound

d) Zirconia/ Magnesia nozzles

e) Aluminium graphite nozzles/ Monoblock stoppers/stopper heads/ stopper rods/ shrouds

f) Porous plugs/ Seat Blocks/ Sleeves/ Slide gate plates

g) Direct bonded basic bricks

h) EBT tubes/ Mass/ Bricks

i) Monolithic/gunning/ramming Mass/Castables

j) Dolomite/ Magnesia Carbon bricks

xii) Casting Powder

3 b) Wire drawing misc. items Comprising of:

i) Dry drawing lubricant

ii) Wire drawing soap

iii) Wet drawing lubricant 34 Kg

iv) Tungsten carbide dies

v) Plastic bobbins/ spools


a) i) Furnace oil ( for units with captive power plant)

30 Kg

ii) Lubricant ( for units with captive power plant)

0.65 kg.

4 b) i) Furnace oil for oil fried reheating frunace in Rolling Mill

50 Kg

ii) Furnace oil for ladle heating 6 kg

Note 1.The above norms is applicable only if the export product(s) is/are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace. 2. Import of item at Sl. No. 3(b) (iii) (iv) (v) shall be allowed against export of wire of size below 1mm dia only.Import of Direct Reduced iron shall be limited to 10% of total metallic input 360Kgs.

1000 kg 1 Major Inputs comprising of:

a) Non Alloy Steel Melting Scrap 1200 Kgs


2 Additives comprising of :

a) Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi)

b) Silico Manganese Or (i) Ferro silicon (ii) Ferro manganese

c) Raw Petroleum Coke 22.46 kgs

C516 Non-Alloy steel wire uncoated (from melting scrap)

d) Cored Wires/ Scrap/ Copper Cathode/Copper Wire

C115

Bar/Copper Rod(if copper is actually present in the export product)

e) Copper Scrap/ Copper Cathode/Copper wire Bar/Copper Rod(if copper is actually present in the export product)

0.04 kgs

f) Cored Wires of lead/ lead Shots. (in case of export of lead bearing free cutting steel only)

2.5 kgs

3 Refractories & Misc. Items

a) Graphite Electrode

b) Rolls/ Tungsten Carbide Rings for Rolling mill

c) Copper lined Moulds for casting 20 kg

d) Saw/ Shear Blade

e) Ceramic coated lancing pipe

f) Temperature Tips

g) Sampler Tips

h) Refractory items comprising of:

1) Zirconia/ Magnesia Nozzles

2) Aluminium Graphite Nozzles/ Monoblock Stoppers/ Stopper head/Stopper Rods/ Shrouds

3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates

4) Direct Bonded basic Bricks

5) EBT Tube/ Mass/ Bricks

6) Monolithic/ Gunning/ Ramming Mass/ Castables

7) Dolomite Magnesia Carbon Bricks

8) Ladle inner Nozzles/ collector Nozzles

3 i) Casting Powder

4 Wire drawing Misc. Items comprising of:

a) Dry drawing lubricants 34 kgs

b) Wire drawing Soap

c) Wet drawing lubricant

d) Tungsten carbide dies

e) Plastic bobbins/ spools


a) (i) Furnace Oil (for Units with captive power Plant)

70 kgs

(ii) Lubricant (for units with captive power Plant)

0.65 kg

5 b) (i) Furnace oil for oil fired Reheating Furnace in Rolling Mill.

50 kgs

(ii) Furnace oil for Ladle heating 6 kg

C116

Note 1. The above norms is applicable only if the export product(s) is/are manfactured through Electric arc furnace/ Induction furnance route using steel melting scrap as basic raw material. 2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed. 3. Import of items at Sl.Nos 4(c)(d) and (e) shall be allowed against export of wire of size bellow 1mm dia only. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.

1000 Kg 1 Major Input comprising of:

i) Non Alloy Steel melting scrap/ Pig Iron

175 kg

ii) Direct Reduced Iron (HBI/ Sponge Iron)

285 kg

iii) Low Ash Metallurgical Coke (Ash content: 15% max.)

500 Kg

iv) Low Silica Lime Stone 100 kg.

2 Additive comprising of:

i) Calcium Silicide Lumps Powder in Cored wires

0.6 kg

ii) Silico Manganese/ Ferro Silicon/ Ferro Manganese

15 kg

iii) Raw/ Calcined Petroleum Coke/ Graphite Powder

4 kg

iv) Aluminium Scrap/ Ingots/ Shorts/ Wires

1 kg

v) Other ferro alloy(s) (including Ferro/ Charge Nickel/ Nickel Oxide Sinter/ Charge/ Ferro Chrome/ Ferro Vanadium/ Ferro Molybdenum/ Ferro Titanium/ Ferro Niobium) provided the alloying element(s) is/are actually present in export product

5 kg

vi) Sulphur Stick/ Sulphur Powder in Cored Wire (in caseof export of Sulphur bearing free cutting steel only)

2.5 kg

vii) Lead Wire/ Shots/ Powder in Cored wire (in case of export of lead bearing free cutting steel only)

4 kg

3 Misc. Inputs comprising of:

a) Graphite Electrodes 4 kg

b) CI/ Steel Rolls/ TC Rolls/ Rings for rolling mill

0.6 kg

c) Copper lined Mould/ Copper Mould for Continuous Casting

0.01 kg

d) Shear blade 0.01 kg

e) Temperature tips/ Celox inserts 0.05 Nos.

f) Sampler tips 0.05 Nos.

g) Submerged tuyers/ Atmospheric injector/ Oxygen lance pipe/ Oxygen Supersonic lance tip

0.77 kg

C517 Non-Alloy/ Alloy steel, Ingots, Blooms, Billets, Slabs, Bars and rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold Twisted Deformed Bars, Thermo Mechanically Treated Reinforcing Bars), Angles, Shapes and Sections (including Beams, Joists, Channels, Special profiles)

h) Shaped Refractories (Fired/ Unfired)

5 kg for non alloy steel 9 kg for alloy steel.

C117

I) Monolithic Refractories (incl. Castables/ Ramming Mass/ Gunning Mixes)

4 kg for non alloy steel 5 kg for alloy steel.

j) Specialty Refractories namely, CC refrctory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate Refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles)

1 kg

k) Casting Powder 1 kg


a) i) Furnace oil for Power Generation (for units with captive power plant only)

30 kg

ii) Lubricant for Power Plant (for units with captive power plant)

0.6 kg

b) i) Furnace oil for Rolling Mill (for units with captive oil fired reheating furnace)

30 kg

ii) Furnace oil for Ladle/ Tundish heating

4 kg

Note 1.The above norms is applicable only if the export product(s) is/are manufactured through Mini Blast Furnace-Electric Arc Furnace route (with/without captive DRI plant) using Hot metal as the principal raw material in Electric Arc Furnace.Units with captive DRI plant may import inputs for DRI as per the relevant SIONs. 2. In case of export of continuous cast billets/ blooms/ slabs, items at Sl.No.3(b) and 4(b)(i) shall not be allowed. Similarly against export of rolled bloom, billets,slabs through ingot route, refractory items 3(J) shall not be allowed. However, in case of export of rolled billets/ blooms/ slabs produced out of continous cast bloom/ billets/ slabs, both items mentioned at Sl.No.3(b) and 4(b)(i) shall be allowed.Further, against export of billets/ blooms/ slabs, quantities of all other inputs shall be reduced by 5%. 3. In case of export of Ingots, import of items at Sl.No.3(b), (c), (d), (j) & 4(b) shall not be permitted. Further quantity of other inputs shall be reduced by 10%. 4. Quantity of Silico-Manganese shall not exceed 60% of total permitted quantity of 15 kg.

C518 Refractories Viz. Magnesite bricks

1 MT 1 Dead Burnt magnesite (Magnesium Oxide 55% and above)

1.1 MT

1000 kgs. 1 Quartzite 1570 kgs

2 (i) Phenolic Based Resin (Liquid) (ii)Phenolic based Resin (Powder) (iii) Ligno Sulphate OR (iv)Goulac

70 kgs 30 kgs 24 kgs 9 kgs

3 (i) Micro Silica and/ or fused Silica (ii) Silicon Metal OR

21 kg 15 kgs

3 (i) Iron Ore Powder (ii) Hydrated Lime (iii) Silicon Metal

12 kgs 79 kgs 21 kg

4 Alloy Steel Mould 0.03 No.

C519 Silica Bricks/ Shapes for Blast Furnace

5 Wooden Mould 0.013 No.

1000 kgs. 1 Quartzite 1570 kgs C520 Silica Bricks/ Shapes for Coke Oven 2 (i) Phenolic Based Resin (Liquid)

(ii) Phenolic based Resin (Powder)

70 kgs 30 kgs

C118

Ligno Sulphate OR 2. Goulac

24 kgs 9 kgs

3 (i) Micro Silica and/ or Fused Silica (ii) Silicon Metal OR

21 kgs 15 kgs

3 (i) Iron Ore Powder (ii) Hydrated Lime (iii) Silicon Metal

14 kgs 88 kgs 21 kgs

4 Alloy Steel Mould 0.04 Nos.

5 Wooden Mould 0.07 Nos.

1000 kgs. 1 Carboxyl Methyl Cellulose 10 kgs C521 Silica Mortar

2 Sodium Hexameta Phosphate 5 kgs

1000 kg. 1 High grade Manganese Ore (with + 40%Mn)

750 kg

2 LAM coke/ Raw petroleum coke/ Australian Char/ Anthracite Coal (with fixed Carbon 88% minimum and Ash content 6% maximum)/ Non Coking Coal

800 kg

3 Carbon Electrode/paste 30 kg

4 Furnace oil */ LSHS/ HFO * 1300 kg

C522 Silico Manganese (Si Mn)

5 Lubricating/ gear Oil * 8 kg


1000 kgs 1 Non alloy steel melting scrap 660 kgs

2 Graphite Electrode 6 kgs

3 Cored wire/ lumps/ powder of Calcium Silicide (CaSi)

1 kg

4 Rolls/ Tungston carbide rings for rolling mills

1.77 kgs



Qty in Kgs as in Formula (i) of Note 4

6 a) Ferro Silicon Qty in Kgs as in Formula (ii) of Note 4

b) Ferro Manganese Qty in Kgs as in Formula (iii) of Note 4

7 Refractory comprising of : 25 kg

a) Zirconia/ magnesia nozzles

b) Aluminium-graphite nozzles/ monoblock stoppers/ stopper head/ shrouds

c) Porous plugs/ Seat blocks/ sleeves/ slidegate plates


e) EBT Tubes/ mass/ bricks

f) Monolithic/ gunning/ ramming mass/ castables

C523 Stainless Steel Wires (from melting scrap)

g) Dolomite/ magnesia carbon bricks

C119

8 Other ferro alloy(s) (Including charge/ ferro nickel & charge chrome ) provided the alloying elements is actually present in the export product

Qty in Kgs, in respect of each ferro alloy as in formula iv of note 4

9 Casting powder 2 kgs

10 Saw/ shear blade 0.01 kg

11 Copper scrap/ Copper Cathode/Copper Wire Bar/Copper Rod (if copper is actually present in the export product)

0.04 kg

12 Furnace oil (For captive power plant)

70 kgs


50 kgs

14 Furnace oil for ladle heating 6 kgs

15 Lubricant (for captive power plant)

0.65 kgs

16 Low silica lime stone 100 kgs

17 Cored wire/ scrap/ ingots of aluminium

1 kg

18 Cored wire of lead/ lead shots in case of export of lead bearing free cutting steel only

2.5 kgs

19 Raw Petroleum coke 5 kgs

20 Ceramic coated lancing Pipe 1 No

21 Temperature tips 0.5 No.

22 Sampler tips 0.25 No.

23 a) Dry drawing lubricant/ coating 9 kg

b) Wire drawing soap 8 kg

c) Tungsten carbide dies 1 No

d) Wet drawing lubricant/ coating 4 kgs

e) Diamond/ Compax dies 4 Nos

f) Plastic Bobbins/ spools 300 Nos

Note:1. The above norm is applicable only if the export product(s) is manufactured through electric arc furnace route/ induction furnace route using steel scrap as basic raw material. 2. Value of Misc. items at sl.no. 2,4,5,7(a) to 7(g),19,20,21,22,23(a) to 23(e) shall not excced 25% of the total CIF value of the licence. 3. In case the product(s) is manufactured through induction furnace route, the item at Sl. No. 2 will not be allowed. 4. (i) 5.50 X(mean average of % Manganese content+mean average of % Silicon content in Steel) (ii) 1100 X (mean average of % Silicon content In Steel)/(mean average of % Silicon content in ferro silicon) (iii) 1100 X (mean average of % Manganese content in steel)/(mean average of % Manganese content in ferro manganese) (iv) 1100 X (Mean average of % alloy content in steel) /(mean average of % alloy content in respective Ferro alloy) 5. Items at Sl.No 23(d) to 23(f) would be allowed against export of wire below 1mm dia only.

C524 Stainless Steel Bars & Rods (including Rounds,

1 Tonne 1 Blooms/ Billets of relevant grade of stainless steel OR

1030 kg

C120

1 Ingots of relevant grade of Stainless Steel

1050 kg

2 CI/ Steel rolls for Hot rolling Mill

0.60 kg (if input is slab) 1.20 kg (if input is ingot)

3 Relevant Shear Blades/ Saw Blades

0.01 kg

4 Relevant fuel (for fuel fired re-heating furnace only)

261000 K. Cal.

Flats, Wire Rods etc. but excluding Bright Bars), Angles, Shapes and Sections (including special profiles)

5 Relevant fuel for electric power for hot rolling mill & auxiliaries (for units with captive power plant / source only)

217500 K. Cal.

Note 1. The quantity of fuel for power generation (i.e 217500 K. Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2. The quantity of fuels (in K. Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K. Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K. Ltr.) may be worked out by dividing the K. Cal. Figures given in the SION by the actual unit heat value of the imported fuel.

1 Tonne 1 Major Inputs : In Kg

a) Non-alloy Steel Melting Scrap, Pig Iron, Sponge Iron including Hot Briquetted Iron (HBI)

As per Note 2.

2 Additives (Ferro Alloys/ Metals/ Compounds) :

(In Kg. per Kg. content of alloying element in the export product)

a) i) Ferro Silicon (Si : 75%) 1.43

a) ii) High Carbon Ferro Manganese (Mn : 75%) OR

1.43

a) ii) Manganese Metal 1.04

b) Charge Chrome, High Carbon Ferro Chrome (Cr : 60%) OR

1.79

b) Low Carbon Ferro Chrome (Cr : 70%)

1.53

c) Unwrought Nickel (Ni : 99%) OR

1.04

c) Ferro Nickel, Nickel Oxide Sinter (Ni : 40%)

2.58

d) Lead (Pb : 99%) Scrap/ Shots/ Wires/ Powder in cored wire

1.60

e) Ferro Molybdenum (Mo : 65%) OR

1.58

e) Molybdenum Oxide (Mo : 60%) 1.89

f) Ferro Titanium (Ti : 70%) 2.43

g) Ferro Tungsten (W : 75%) 1.38

C525 Stainless Steel (Excluding Exhaust Valve Steel) Semi-finished Products (Blooms, Billets & Slabs) and Ingots

h) Any other Nobel/ Special Ferro-alloys (Ferro Vanadium, Ferro Boron, Ferro Phosphorous, etc.)

1.38

C121

I) Any other Metal (not present in aforesaid ferro-alloys) in unwrought or wrought form or in powder form or powders in cored wires

1.04

j) Sulphur stick / Sulphur powder in cored wire

2.00

3 Consumables / Missc. Inputs : In kgs

a) Ferro-Silicon (Si : 75%) (for de-oxidation/ Reduction)

20

b) Graphite Electrodes (For units with EAF Furnace only)

4

c) Relevant CI, Steel Rolls for Hot Rolling Mill/ Continuous Casting Machine (against export of rolled products only)

0.6

d) Relevant Copper lined Moulds, Copper Moulds/ Tubes for Continuous Casting (if export product is produced through Continuous Casting route with/ without further rolling)

0.01

e) Casting Powder 1

f) Aluminium wires, Notched bars,scraps, shots, ingots, Dross, Powder in Cored Wire and Ferro Aluminium

2

g) CaSi Lumps, CaFe Lumps, Powder of CaFeAl, cafe, CaSi in Cored wire

0.1

h) Rolling Mill Oil, Hydraulic Oil, Lubricating Oil (against export of rolled products only)

0.5

I) Celox Inserts, Temperature Tips, Oxygen Probes, Sampler Probes, Sampler Tips

0.1

j) Relevant Shear Blades, Saw Blades

0.01

k) Oxygen Lance pipes, Sub-merged tuyers, Atmospheric injector

0.1

l) Calcium Carbide 0.5

m) Low silica Calcined lime/ lime stone

100

n) Refractories :

i) Relevant Shaped Refractories (Fired/Un-fired Bricks/Shapes)

20

ii) Relevant Monolithic Refractories (including Castables, ramming mass, gunning Mixes)

4

iii) Relevant Special Refractories i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles

1

o) Calcined / Raw Petroleum coke 10

C122

4 Enerhgy Soureces :

a) Relevant fuel for electric Power for Steel making and Auxiliaries (for units with captive power plant/ source only

1000500 K. Cal

b) Relevant Lubricant for captive power plant

1 kg

c) Relevant fuel for fuel fired re-heating furnace (if & only if export product is supplied in rolled condition)

261000 K. Cal

d) Relevant fuel for electric power for hot rolling mill & auxiliaries (if & only if export product is supplied in rolled condition)

217500 K. Cal

e) Relevant fuel for ladle / tundish / ferro-alloy heating

35000 K. Cal

f) Relevant fuel for Boilers for VOD (to units having VOD facilities only)

130500 K. Cal

Note: 1. This norm is applicable for export product manufactured adopting Electric Furnace/ Electric Induction Furnace using Non-alloy Steel Melting Scrap as the basic input. Note: 2. The total quantity of imported inputs allowed against Sl.No. 1 (a) and Sl No. 2 shall be limited to 1115 kg. Further, individual quantity of Pig Iron and Sponge Iron/ HBI allowed against Sl. No. 1(a), if any, shall not exceed 20% and 65% respectively of the total quantity of items to be permitted therein. Note: 3. Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the parenthesis against each alloy. If the percentage of alloying element in the ferro-alloy is higher/lower, the revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm Actual % of element in the imported ferroalloy/metal/compound Note: 4. For a given alloying element in steel, wherever two alternate ferroalloy / metals / compound of the same alloying element have been permitted and it is proposed to import a combination of both, individual quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying element in two forms (but within the overall quantity of alloying element in the steel), using the content based formula given therein. Note: 5. Alloying elements (s) in steel is/are prescribed by specifying the minimum value or a range or the maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the maximum value of the respective alloying element (s) in the export product shall be taken into consideration. Note: 6. Import of Stainless Steel Melting Scrap of Known chemical composition may be permitted within the overall quantity of item No. 1 (a) but upto 90% to Induction Furnace units having AOD/VOD facilities and Electric Furnace units. For units having Induction Furnaces without AOD/VOD, import of stainless steel melting scrap will however, be permitted within the overall quantity of item No. 1(a) but upto 60% only. Only such grade of Stainless Steel Melting Scrap will be allowed that is relevant to the export product. In such a case, quantity of respective ferroalloy/metal to be allowed as per formula at Sl. No. 2 will have to be reduced to account for the recoverable alloying element (s) (Nickel, Copper, Chromium and Vanadium) present in the stainless steel scrap. The reduced quantity of these ferroalloys/metals shall be obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following formula from the total quantity to be worked out as per formula at Sl. No. 2 in the SION read with Note 3:

C123

Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap 1.115 x % of relevant element in ferroalloy / metal / compound Note 7: The specified quantities of energy sources/ fuel for electric power generation(in K.Cal) against import item 4(a) & 4(c) which correspond to electric power consumption of 500 and 100 KWH per tonne of export product have been allowed assuming that Captive Power Plant (CPP)/Source of matching capacity exist. In case CPP/source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 8: Quantity of energy sources/ fuels (in K.Cal) correspond to a fuel having unit heat value of 8700 K.Cal. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be worked out by dividing the K.Cal figures given in the SION by the actual unit heat value of the imported fuel. Note 9 : Import of items at Sl.No. 3(b), (c), (d), (i), CC Refractories under 3(n) (iii) and 4(c) shall not be permitted against export of steel ingots. Note 10 : The Item “Low Carbon Ferro Chrome” under 2(b) above is to be allowed only to manufacturers not having Argon Oxygen Decarburization (AOD) and Vacuum Oxygen decarburization (VOD) . However, this input may be allowed @ 80 kg (max) to units with only VOD facilities and @10 Kgs (max) to units with only AOD facilities.

1000 kgs 1 HRSS Wide Coils / Strips of relevant grade

1075 kg

2 PVC Film (with glue) As per packing Policy

3 Relevant Steel Shots (only against export product in short blasted condition)

5 kg

4 Kraft Inter-leaving Paper As per packing Policy

5 Ditamacous Earth 0.4 kg

6 Relevant CI / Steel Rolls for Cold Rolling Mill

0.6 kg

7 Furnace Oil or other Relevant Fuel for electric power for CRM & Auxiliaries (for units with Captive Power plant/Source only)

140 kg Furnace Oil OR 1218000 K. Cal other relevant fuel (s)

C526 Cold Rolled Stainless Steel Plates/Sheets/hoops & Strips/ Wide Coils/Circles.

8 LPG or other Relevant fuel for annealing furnace (against export of annealed products only)

60 kg LPG OR 624000 K. Cal other relevant fuel (s)

Note 1 : Import of energy sources / fuel(s) as at Sl. No. 7 & 8 of the import list may be permitted provided the fuel is relevant to the installed facilities in a given unit. Quantity of such fuel (in Kgs./ cubic meters/ K.liters) other than Furnace oil & LPGs may be worked out by dividing the specified K. Cal figures given in the SION by the actual unit heat value of the imported fuel. Note 2 : The specified quantity of energy sources (in K.Cal) for electic power generation for cold rolling mill, which corresponds to 600 KWH/tonne of export product, have been allowed assuming captive power plant/source of at-least matching capacity exist. In case, the CPP/ source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 3 : In case the export product is Circle/circular blanks punched out from CR Stainless Steel

C124

Sheets/Strips/Wide coils, the quantities of imported inputs will increase which may be obtained by multiplying the given quantities by a factor of 1.16.

1000 kgs 1 a) Stainless Steel Wire Rods OR

1060 kgs

1 b) Stainless Steel Wire of dia 1.2 mm and above for redrawing of thinner wire of dia 1 mm and below. OR

1020 kgs.

1 c) Stainless Steel Wire of dia 0.7 mm and above for redrawing of thinner wire of dia 0.25 mm and below.

1020 kgs.

2 Dry Drawing Lubricant/ coating 9 Kgs

3 Wire Drawing Soap 8 Kgs

4 Tungston Carbide Dies 1 No

5 Wet Drawing Lubricant/ coating 4 Kgs

6 Diamond or Blanks/ Compax dies

4 Nos

7 (a) Used/ New Plastics/ Steel Bobbins/ Spools OR (b) ABS/ Polystrene for making Plastics Bobbings/ Spools

300 Nos 1.05 kg/kg content of Plastic Bobbins/ Spools in the export product

C527 Stainless Steel Wires/Ribbon.

8 Inconel Pipes/ Tubes 2 kgs.

Note No.1. Import of items at Sl. No. (5) (6) & (7) shall be allowed against export of stainless steel wires of size below 1.6 mm only.

1 kg 1 Non-Alloy Steel Wire Rod 1.00 kg C528 Steel Earthing Wire (Gavanized) 2 Zinc 0.04 kg

C529 Deleted.

C530 1"Flexible Tubing 1 kg 1 Low carbon M.S. defective sheets/ coils

1.05 kg

C531 1/2" Flexible Tubings 1 kg 1 Low carbon M.S. defective sheets/ coils

1.047 kg

1 kg 1 Low Carbon M.S. Defective Sheets/ Coils

1.052 kg C532 1/2" to 3" Galvanised Flexible Conduits

2 Zinc 0.04 kg

1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip

1.4696 kg/ kg wt. of steel in export

C533 2" Bungs with or without Washer/Gasket

2 Gaskets OR Gasket Tube of relevant length

Net to Net Net +2% wastage

1 No 1 Hot/Cold Rolled Steel Sheet/Coil/strip

2.10 Kg /kg wt of steel

C534 2" Flanges with or without Washer/Gasket


Net to net Net + 2% wastage

1 HR/CR Sheets/ Coils/ Strips 2.10 Kg/Kg wt. of steel (ungalvanised)in the export product

C535 2" Galvanised flanges with rubber gaskets

2 Synthetic rubber namely SBR/PBR/Nitrile/EPDM

0.700 Kg/Kg wt of Gasket in the export product

C125

3 Zinc 0.04 Kg /Kg wt. of steel in the export product

4 Resistant Laquer 1.42 kg/kg content in the export product.


1.4696 kg/ kg wt of steel (Ungalvanised) in export

2 Plastic Gasket OR LDPE Granules OR Gasket Tube of relevant length

Net to net 1.05 kg/kg weight of Gasket Net+2% wastage

3 Zinc Ingot 0.04 kg/kg of steel in export

C536 2" Galvanised/ Zinc Coated Bungs

4 Resistant Laquer 1.42 kg/kg content in the export product


2.10 kg/kg wt of steel (Ungalvanised) in the export product


Net to net Net+2% wastage

3 Zinc Ingot 0.04 kg/kg wt. of steel in export

C537 2" Galvanised/Zinc coated Flange


1 HR/CR Sheets/Coils/Strips 1.4696 Kg/kg wt. of steel (ungalvanised) in the export product.

2 Relevant Synthetic rubber, namely SBR/PBR/Nitrile/EPDM

0.700 Kg/kg wt. of Gasket in the export product

3 Zinc 0.04 Kg/Kg wt. of steel in export product

C538 2"Galvanised Bungs with rubber Gasket



1.8 kg /kg wt of steel (ungalvanised) in export

C539 3/4" Bungs with or without Washer/Gasket


Net to net Net+2%wastage


1.776 kg/kg wt of steel in export

C540 3/4" Flanges with or without Washer/Gasket


Net to Net Net+2%wastage

C541 3/4" Flexible Tubings 1 kg 1 Low carbon M.S. defective sheets/ coils

1.0471 kg


2 Synthetic rubber, namely SBR/PBR/Nitrile/EPDM

0.700 Kg/kg wt. of Gasket in the export product

C542 3/4" Galvanised bungs with rubber gaskets


C126



2 Synthetic rubber, namely SBR/PBR/Nitrile/EPDM

0.700 Kg/kg wt. of Gaskets in the export product


C543 3/4" Galvanised flanges with rubber gaskets


1 Kg 1 Hot/Cold Rolled steel sheet/coil/strip.

1.8 Kg/Kg of steel (ungalvanised) in export

2 Zinc 0.04 Kg/Kg content of steel in export

C544 3/4" Galvanised Zinc coated Bungs

3 Gasket OR Gasket Tube of relevant length



1.776kg/ kg wt of steel (ungalvanised)in export



3 Zinc Ingot 0.04 kg /kg of steel in export

C545 3/4" Galvanised/ Zinc coated Flanges


1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils

1.026 kg C546 Adjustable Bracket (Galvanised)

2 Zinc 0.040 kg


1.060 kg C547 Wood to steel adapter, all types.

2 Zinc 0.040 kg

1 No. 1 Compressor 1 No.

2 Grill Assembly Net to net

3 Copper Tube of relevant size Net content + 1% wastage

4 Fractional HP Motor 1 No.

5 Louver Motor (Synchronous motor)

Net to net

6 Capacitor of relevant specification

1 No.

7 Copper Capillary of relevant size 1 No.

8 Thermostate 1 No.

9 Propeller (Fan) 1 No.

10 Blower 1 No.

11 Switch 1 No.

12 Main Cord of relevant specification

1 No.

C548 Airconditioner (All Types excluding Split Air Conditioner)

13 Mild Steel/Galvanised Steel in Sheet/Coil form

Net content + 5% wastage.

C127

14 Aluminium Sheet/Foil Net content + 2% wastage.

15 Powder Paint 0.5% of FOB

16 Eco-Friendly Refrigerant Gas Net to net

1 kg 1 Non Alloy Steel Round OR


1 Non Alloy Steel Wire Rods / Rounds in Coils OR


C549 Anchor Bolt with Nut

1 Non Alloy Steel Billets 1.15 kg/kg content in export product

Note : 1. If the export product is painted, in addition relevant paint may be allowed to the extent of 4% of the FOB value.

1.000 kg 1 Non-Alloy Steel Round/ Billets 1.200 kg/kg content in exports

C550 Animal Drawn Ploughs/ Parts Thereof

2 LDPE Bitumenised Paper, Card Board

1.05 kg


1.219 kg C551 Arm Blade (Galvanised)

2 Zinc 0.040 kg

1 kg. 1 Mild Steel HR Sheets/ Strips/ Coils

0.551 kg

2 Mild Steel CR Sheets/ Strips/ Coils

0.157 kg

C552 Aruvil Double Wheel Carrier kit Set (Galvanised)

3 Zinc 0.040 kg

C553 Automatic Thimble 1 No. 1 Kontratherm Disc 2 Nos.

C554 Axes made of Steel 1 kg 1 Non-Alloy Steel Round/ Billets 1.250 kg/kg content in export

C555 Deleted

C556 Deleted

C557 Deleted

1 kg. 1 Pig Iron 0.970 kg C558 Ball Chain Cap (Galvanised) 2 Zinc 0.040 kg

1 kg. 1 Brass scrap 1.075 kg C559 Ball Pen Steel Refills

2 Steel Balls 1.020 Nos


1.15 kg

2 Zinc OR

0.040 kg

C560 Barb Arm (Galvanised)

1 G.P. Sheet/Strips/Coils 1.15 kg

1 kg. 1 Pig Iron 0.970 kg C561 Barb Arm Base

2 Zinc 0.030 kg

1 Kg 1 Ball Bearing Grade Steel Tube (SAE 52100) OR Ball Bearing Grade Steel Bar (SAE 52100)

1.15 kgs 1.30 kgs

C562 Bearing Races (Turned Inner and Outer)

2 Misc. Items: Super Precision Fibre Cage Bearing, Grinding Spindle and Grinding Wheel


C563 Bell Metal utensils 1 kg Bell metal scrap 1.030 kg

C128

2 Lakh Nos. A. RAW MATERIALS:

1 Calcite Powder 144.50 kgs

2 Calcined Alumina 3701.86 Kgs

3 Steiron Talc 31.50 Kgs

4 Green Pigment 0.62 Kg

5 Active Bentonite 0.40 Kg

6 Adhesive 2.00 Kgs

7 Dextrin 0.40 Kg

8 Fusing Glass 50.80 Kgs

9 Carbonyl Iron Powder 36.36 Kgs

10 Melt Mullite 20.00 Kgs

11 Fine Graphite Powder 10.98 Kgs

12 Inscription Script Green 0.40 Kg

13 Nickel Alloy Round/Profile Wire 90.64 Kgs

14 Nickel Squares/Anodes 34.00 Kgs

15 Nickel Sulphate 112.00 Kgs

B. COMPONENTS:

1 Bi-Metal Electrode Net to Net

2 Electrode Shank Net to net.

3 Washer/Gasket Net to net.

4 Sealing Washer Net to net.

5 Terminal Cap/Nut Net to net.

6 Sealing Washer/Ring Net to net.

7 Housing OR Cold Heading/ Extruding/ Forging Steel Rounds/ Bars/ Coils and Rods of Dia 13 mm to 19.6 mm

Net to Net. 9178.33 kgs

8 Insulator 1 No./ unit (Net to net)

9 Resister 1 No./ unit (Net to net)

10 Spring 1 No./ unit (Net to net)

C. MISC. ITEMS: Upto 2% of FOB value of export.

1 Molykote "G" Rapid Spray

2 Silver Anode

3 Silver 1M Salt

4 Special HSS Drills

5 Inscription Strips

6 Grinding Mandrels

7 Thread Chasers/Thread Rolling Jaws

8 Electrode Disc Blanks

C564 Bimetallic Type Spark Plug

9 Grinding Wheels

C129

10 Inscription Ring

11 Pressing Pins

12 Stamp Head

13 Welding Electrodes

14 Form Sinkers

15 Carbide Tips/Inserts/Ceramic Inserts

16 Punches

17 Shear Blade

18 Sillment Powder (198 kgs)

19 Activator (9.9 kg)

20 Epoxy Resin (26 kg)

Import item viz insulator mentioned at Sl. No. 8 of Components shall be allowed for import in lieu of import items at Sl. No. 1 to 12 of Raw Material.

C565 Deleted

1 kg. 1 Pig Iron OR

1.356 kg

Hot Melting Scrap OR

1.287 kg

Steel Skulls 1.519 kg

C566 Galvanised Welded steel Pipes/ Tubes

2 Zinc 0.040 kg

1 kg. 1 MS Round 1.094 kg C567 Bolt Axle (Galvanised) made of Steel. 2 Zinc 0.040 kg

C568 Bolts & Nuts made of CHQ Steel

1 kg 1 CHQ Grade Non-Alloy Steel Round/Wire Rod

1.165 kg

1 kg 1 MS Round/Rods OR

1.18 kg

MS Billets OR

1.2390 kgs.

MS Billets Cuttings/Re-Rollable Scrap

1.2626 kgs.

C569 Bolts (Galvanisded)

2 Zinc 0.040 kg

C570 Bolts/screws made of steel 1 kg 1 Alloy/ Non-Alloy Steel Rounds/ Wire Rods/Bars/Rods


If the export product is painted/coated in addition relevant Paint/ Coating Powder may be allowed to the extent of 4% of the FOB value.

1 kg 1 Alloy/ Non-Alloy Steel Rounds/ Wire Rods


C571 Bolts/screws made of steel Electroplated

2 Nickel 0.0097 kg/ kg of export product

1 kg 1 Alloy/ Non-Alloy Steel Rounds/ Wire Rods


C572 Bolts/screws made of steel galvanised

2 Zinc 0.04 kg/ kg of export product

C573 Bottom, Top Cover of Round Battery Jacket made of Tin plate.

1 kg 1 Electrolytic Tin Plate Prime 1.25 kg


1.01 kg C574 Boulevard Clamp (Galvanised)

2 Zinc 0.040 kg

C130

1 MT 1 Steel Plates 50B grade confirming to BS 4360

1.5 MT C575 Box Girders for Bridges (Galvanised)

2 Zinc 0.040 kg


0.602 kg

2 Mild Steel Rounds 0.569 kg

C576 Box Hinge (Galvanised)

3 Zinc 0.040 kg


0.993 kg C577 Brace Band (Galvanised)

2 Zinc 0.040 kg

1 kg. 1 Cold Rolled MS Sheets/ Strips/ Coils

0.884 kg

2 MS Plate 0.354 kg

C578 Brace Rail End (Galvanised)

3 Zinc 0.040kg

1 kg. 1 Pig Iron 0.970 kg C579 Brace Rail End (Galvanised) 2 Zinc 0.040 kg

C580 Brass Builder Hardware 1 kg 1 Brass scrap 1.11 kg/kg content in the export product

C581 Brass caps for dry cells batteries

1 kg 1 Brass scrap 1.075 kg

1 Kg. 1 Copper Cathodes/Copper Ingots/Copper Wire Bars/ Copper Rods OR


1 Copper Scrap 1.12 kg/kg content in the export product

2 Zinc 1.10 kg/kg content in the export product

3 Graphite Plate *

C582 Brass Cup or Cup, Bullet, Jacket of Copper Alloy for Defence application

4 Morcem cement **

Note: * 1 set of two plates for 7 MT of export product will be allowed ** 1 Kg per 175 Kg of export product will be allowed.

1 MT 1 Brass Scrap 1.12 MT C583 Brass Tubes

2 Drawing Dies Upto 5% of FOB value of exports

C584 Brass valves 1 kg 1 Brass Scrap 1.075 kg

C585 Bronze utensils 1 kg 1 Bronze scrap 1.030 kg


0.602 kg


C586 Bull Dog Hinge

3 Zinc 0.040 kg

1 MT 1 Aluminium Alloy Rod (Grade AA2011T3 dia 20mm).

1.60 MT/MT content in export product.

C587 Bushing Reverse Ball Valve made of Aluminium Alloy ( Grade AA 2011T3) ( Motor Vehicle Part)

2 Tools namely Collet, Guide Bush, Carbide Form Cutter(HOB), Carbide Drill/Twist Drill


1 MT 1 Aluminium Alloy Rod (Grade AA2011T3 Ddia 20mm)


C588 Bushing Third Ball Valve made of Aluminium Alloy (Grade AA 2011T3) (Motor Vehicle Part)

2 Tools namely Collet, Guide Bush, Carbide Form Cutter(HOB), Carbide


C131

Drill/Twist Drill

1 kg 1 Mild Steel CRCA Sheets/ cuttings/ coils/ defective/ secondary


2 6 Leverlock with dead locking Mechanism (relevant)

1 No. (net to net)

3 Round Spindle Handle (relevant) 1 No. (Net to net)

4 3 Ply Carton (As per packing policy)

5 ULF Slides 428mm long @ 2 Nos./drawer.

Net to net.

6 Cam Lock Brass No./Cabinet. Net to net

C589 Epoxy Polyester Powder coated Cabinet made of CRCA Non-Alloy Steel Sheets OR Cabinets made of CRCA Non-Alloy Steel Sheets other than Epoxy Polyester Powder Coated.

7 Epoxy Polyester Powder. 6% of FOB value.

The import of Epoxy Polyester powder shall be allowed only for caninets coated with this powder.

C590 Cable Ties made of Stainless Steel

1 kg 1 Stainless Steel Strips /Coils of AISI 304Grade

1.25 Kg

1 No. 1 Non-Alloy Steel Round/ Billets 1.320 kg

2 Mild Steel HR Sheet/Strips/Coil 1.10 kg/kg content in export

3 Mild Steel Rounds 1.05 kg/kg content in export

4 Pig Iron 1.10 kg/kg content in export

5 Zinc Upto 2% of weight of export

C591 Cantilever Gate Roller (Galvanised)

6 Bearing Net to Net

C592 Capseal made out of Tin Plate Waste/Waste or Tin Free Steel

1 No. 1 Tin Plate Waste/ Waste OR Tin Free Steel.


1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content in the export product

2 Welding Flux 5.0 Kg

3 Welding Wire 4.13 Kg

4 Grinding Wheel 0.2 No.

5 Oil & Lubricants 1.5 Litres

6 Cutting Oil 0.5 Kg

7 CO2 Wire 0.8 Kg

8 Rust Preventing Oil 0.1 Kg

C593 Carbon Steel Submerged Arc Welded Pipes as per API Grade/ ASTM Grade or equivalent OR Hot Formed Steel Bends as per API, ASTM Grade or euivalent grade Degree: 0-180 Degree

9 X-Ray Film 1 Sheet

Note: 1. The total CIF Value of all items appearing at Sl.Nos 2 & 4 to 9 shall not exceed 3% of FOB Value of export. 2. An additional item X-Ray tube will be allowed for order of pipes above 25,000 MT

C594 Carbon/ Alloy Steel Seamless Tubes (Cold Finished)

1 MT 1 Carbon/ Alloy Steel Rounds/ Bars/ Billets OR Carbon Steel Seamless mother pipes (hot finish)

1.44 MT 1.20 MT

1 kg 1 CR/HR Coil in Prime/Second condition

1.05 Kg/kg content in export.

C595 Ceramic Coated Steel Pipes With or Without couplings 2 Micro Silica 1.05 Kg/Kg content

in export.

C132

3 Aimina Cement 1.05 Kg/Kg content in export Product

C596 Cl Cistern 1 kg 1 Pig Iron 1.100 kg


1100 kg


110 kg


5 kg



C597 Cl Pipes and Fittings




C598 CLEVIS 1 kg 1 MS Flats/Plates 1.100 kg/kg content in export.

1 MT 1 Alloy Steel Rounds/Rods OR Alloy Steel Billets

1.15 MT 1.20 MT

C599 Clips for Railways - Elastic Rail clips, pendrol clips, E. Clips and G-Clips. 2 Misc. Items such as Cutting

Tools, Grinding Wheels, Refractory Material, Lubricating Oil, Anti- Rust Oil, Paints, Quenching Oil, Heat Treatment chemicals


C600 Coil Spring 1 kg 1 M.S. wire rod 1.067 kg

C601 Cold Rolled Steel Tubes for Furniture

1 MT 1 Cold Rolled Non-alloy Steel Sheet/ Strip/ Wire Coils (prime seconds/ defectives)

1.05 MT

C602 Cold Rolled Precision Steel Tubes

1 MT 1 CR Steel Coils/ Sheets in Prime 1.05 MT

1 MT 1 Alloy/Non-Alloy Steel Round/Billets/Bars OR

1.998 MT C603 Machined/ Cold Rolled/Cold Formed rings for bearing races, CV cages 1 Seamless Steel Tubes 1.57 MT


1.028 kg C604 Collar

2 Zinc 0.060 kg

C605 Components of Electric Teeth Plaque removing Brush: Drive Gear

1 Kg 1 Stainless Steel Rod/Coil Dia 2.4 mm to 4.8 mm (AISI 416)

6.0 Kgs

Please see Note below C-608

C606 Components of Electric Teeth Plaque removing Brush: Satelite Gear

1 Kg 1 Stainless Steel Rod/Coil Dia 2.4 mm to 4.8 mm (AISI 416)

5 kg


C607 Components of Electric 1 Kg 1 Stainless Steel Strips/Coil upto 5 Kgs

C133

Teeth Plaque removing Brush: Rack

1.5 mm thick (AISI 416 T)


C608 Components of Electric Teeth Plaque removing Brush: Rack Pin/Pin (Big & small).

1 Kg 1 Stainless Steel Rods/Coil upto 1.5mm thick (AISI 416 T).

2 kg

Note: In respect of norms covered by Sl.Nos. 605 to 608 : above Relevant consumables in the form of Chemicals IA/IM/IC Solution of cutting tools (a) Collet for automat (b) Guide bush (c) Carbide form cutter (HOBB) and (d) Carbide drill and twist drill will be allowed upto 20% of the FOB Value.

1 Kg 1 Stainless Steel Rod 2.4 mm to 4.8 mm

4.9 Kgs C609 Components of Electronic Home plaque removing instruments: Drive Gear

2 Misc. items in the form of chemicals IA/IM/IC solution and cutting tools (a) Collet for Automat (b) Guide Bush (c) Carbide form cutter (Hobb) and (d) Carbide drill & Twist Drill

CIF Value limited to 20% of FOB value.

C610 Components of Steel Drum namely Body Sheets/ Circles made of CRCA

1 MT 1 CRCA Steel Coils 1.05 MT/MT content of CRCA Steel in export product.

1 kg 1 CR Stainless Steel Sheets/Coils AISI 304


C611 Copper Bottom Stainless Steel Kitchenwares

2 Copper Ingot/Rods 1.02 kg/kg of net content in the export product

C612 Copper utensils 1 kg 1 Copper scrap 1.020 kg


1.921 kg


C613 Corner Arm (Galvanised)

3 Zinc 0.040 kg

1 No. 1 Needle Bearing MR 48 SS Bore 76.2 MM

Net to net.

2 Needle Bearing MR 22 SS Bore 34.8 MM

Net to net.

3 Roller Bearing NUP 308 Bore 40 MM WT-725 Gms.+/-10% tolerance limit

Net to net.

4 DU Bush 48 DU 72 Net to net.

5 DU Bush PAP 4030 Net to net.

6 Vari Seal Net to net.

7 SS H.T. Bolts Net to net.

8 Spring Washer Net to net.

C614 Crank Drive of Cryogenic Pumps

9 Nolos Rings Net to net.

C615 CRCA Butt Hinges 1 kg 1 CRCA sheet/coil 1.0823 kg

1 MT 1 CRCA Sheet of relevant gauge 1.16 kg/kg content in export product.

C616 CRCA Ghamellas with/without handle made of CRCA Sheet/M.S. Wire Rod

2 M.S. Wire Rod of relevant diameter


C134

1 kg 1 CRCA Sheet/Coil 1.08 Kg/Kg. content in export Product

2 Low Carbon Wire Rod. 1.02 Kg/Kg. content in export Product

3 Nickel. 0.097 Kg/Kg. content of steel in export Product

C617 CRCA Hinges Electric Brass plated

4 Brass Scrap 0.02 Kg/Kg. of steel content in export product.

1 kg 1 CRCA Sheet/coil 1.08 Kg/Kg. content in export product

C618 CRCA Hinges self colour

2 Low Carbon Wire Rod 1.02 Kg/Kg. content in export product

1 kg 1 CRCA Sheet/coil 1.08 Kg./Kg. content in export product.

2 Low Carbon Wire Rod 1.02 Kg./Kg. content in export product.

C619 CRCA Hinges Zinc plated

3 Zinc Upto 4% of net weight of steel in the export product.

C620 Crow Bar / Wrecking Bar


1 Non-Alloy Steel Round/ Billets 1.100 kg

1 kg 1 Tin Free Steel/Tin Plate Prime 1.22 kg/kg content in export.

2 PVC Compound or PVC Free Compound


C621 Crowns made of Tin free steel/ Tin Plate Prime with dry blend lining Printed

3 Printing Ink, Coating Lacquer, Varnish

0.065 Ltr.

1 kg MS Flat Plate content

1 MS Flat/plate 1.07 kg

2 MS Round 1.05 kg

C622 Cultivator

3 MS Plates 1.11 kg

C623 Cupboard made of CRCA Sheets


1 Mild Steel CRCA Sheets/ cuttings/ coils/ defective/ secondary

1.05 kg

C624 Cut Hand tacks made of M.S. Sheets

1.0 Kgs 1 M.S. Second/ Defective /Sheets/ Coils/ Strips

1.05 Kg

1 kg 1 Aluminium Ingot 1.05 kg C625 Decorative Handicrafts/Artwares made of Anodised Aluminium

2 Dyes for Anodising 1% of FOB value

C626 Dimmer Stat continuously variable voltage auto transformer (copper wound) - Portable types

1 No. 1 CRGO Steel Sheets 1.02 kg/kg content in export

1 No. 1 HRMS Sheets 4 mm OR Seamless Steel Tubes.

1.10 Kg./Kg. content in export OR q.p2Kg/Kg content in the export product.

2 Asbestos Net to net

C627 Dissolved Acetylene Gas Cylinder

3 Calite Net to net

C135

4 Acetone 1.05 Kg/Kg content in export

5 Primer paint

6 Marron Paint

7 Valve (Brass) Net to Net

8 Valve (Guard) Net to Net

9 Neck Ring Net to Net

10 Fuisible Plug Net to Net

1 No. 1 U-Cup Seal Net to net.

2 Polyurethene-O-Ring Net to net.

C628 Divider Valves (Metering Device)

3 Drawn Steel Bars/ Section Free Cutting Steel with Leaded ENIA


C629 Domestic utensils (Brass) 1 kg 1 Brass 1.030 kg

C630 Door/ Window/ ventilator Sections

1 kg 1 M.S. Billets. 1.07 kg/Kg content in the export product.

1 kg. 1 Mild Steel HR Sheets/ Strips/ Coil

0.348 kg

2 Mild Steel CR Sheets/ Strips/ Coils

0.135 kg

3 MS Rounds 0.170 kg

4 Natural Rubber 0.477 kg

C631 Double Carrier Wheel

5 Zinc 0.045 kg

1 Kg 1 Relevant CHQ Alloy Steel/ Stainless Steel wire Rods in Coils or Bars

1.7 Kgs C632 Dowel Pin made out of CHQ Alloy steel/ Stainless Steel

2 Misc. items such as: Tool & Die Steel/Grinding Wheel/Threading Tapes

Upto 5% of FOB value

C633 Drag Link Chain 1 kg content of Import Item

1 Non-Alloy Round/ Billets 1.10 kg

C634 Drive Rod made of Stainless Steel (Part of Dental Instrument)

1 MT 1 Stainless Steel Rod 1.10 MT/MT content in the export product.

1 MT 1 Pig Iron 0.96 MT

2 Non Alloy Steel Melting Scrap. 0.24 MT

3 Ferro Silicon 50 Kgs

4 Pure Magnesium 3 kg

5 Hard Coke 175 Kg

6 Light Diesel Oil 156.5 ltrs

7 Cement 91.8 Kgs

8 Blacking Powder 0.5 Kg

9 Mould Powder 1.8 Kg

10 Zinc Wire 7.6 Kg

11 Bitumen Solution 5.6 ltrs

12 Inoculants 2.5 Kg

C635 Ductile Iron Spun Pipes

13 High Alumina Refractory 20 Kgs

C136

14 Gasket Net to net

15 Lubricant Net to net.

Note:- 1. Import of Cement is to be allowed only in case the export product is for "DI Pipes with Cement Mortar as inside lining. In case of DI Pipes withCement Mortar, the input quantities of other items covered by the list will be worked out based on export weight of DI Pipes minus the weight of Cement Mortar. Note : 2. Import of Gasket & Lubricants shall be on net to net basis with accountability and specification should match in import and export

C636 Electrolytic Tinplate Components

1 kg 1 Electrolytic Tinplate Prime MR Type

1.05 kg

1 kg 1 Stainless Steel Rod AISI-416 Dia 4.0mm to 5.0mm

4.2 kg

2 Fine Copper Grits for Blasting on S.S. components

3 Fine Brass Grits for Blasting on S.S. components

4 Chemical for Deburring & Polishing

5 Corrossion Protective Chemicals

6 Carbide Form Cutter (HOB)

7 Carbide Cutter Net to Net.

8 Collect Net to net

C637 Electronic Medical/Dental Instruments and Parts thereof: Motor Pinion ASI-416

9 Guide Bush Net to net

Note:- 1 Import item Nos. 2 to 6 are allowed in total Upto 2% of FOB value of export.

1 kg 1 Alloy Steel Bars/Coils Type SAE 52100/Equivalent

3.43 Kg

2 Misc. Items: Upto 2% of FOB value of export.

a) Gun Drill

b) Lapping Compound

c) Honing Mandrels

C638 Element of Fuel Injection Equipment

d) Solder Paste

C639 Round/Eliptical /Oval Tin Plate container and/ or components thereof

1 Kg 1 Electrolytic Tinplate waste/waste 1.15 Kgs


0.999 kg C640 End Clamp

2 Zinc 0.075 kg

1 kg 1 Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips


C641 Fabricated Steel Hardware/ Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips

2 Zinc Ingot (to be allowed only in case the product is Galvanised)



1.091 kg C642 Female Hinge

2 Zinc 0.060 kg

C643 Fitting made out of Non- 1 MT 1 Non-Alloy Steel 1.25 MT

C137

Rounds/Hexagons Alloy Steel (Galvanised) 2 Zinc Metal 0.04 MT


1.060 kg C644 Flange Plate

2 Zinc 0.040 kg

1 kg 1 CRCA Steel Sheet/Coil ;in 0.3 mm and 0.45 mm thickness

0.658 kg


C645 Flexible Channel/Drop Channel/Rigid Channel

3 Rubber Chemicals (Accelerator and Zinc Oxide)

0.01 kg

1 MT 1 Stainless Steel Sheet/Coils 1.25 MT/MT content in the export product

C646 Flexible Corrugated Stainless Steel Hose with Braidings of Stainless Steel Wire

2 Stainless Steel Wire 1.10 MT/MT content in export.

1 kg. 1 Pig Iron 0.970 kg C647 Floor Flange

2 Zinc 0.030 kg

C648 Floor Strainer/ Insect Stopper made of Stainless Steel

1 kg 1 Stainless Steel Sheet - AISI-304 1.45 kg

1 Dozen 1 Water Proof Umbrella Nylon Cloth

1.05 Sq. Yard/Sq. Yard content in export.

2 Complete Umbrella Frames without handles & without cloth OR

1.0 Dozen

2 a) Umbrella Tube with accessories

i) Tube Fitted with Notch 1.01 Dozen

ii) Up Runners with Ring 1.01 Dozen

iii) Down Runners 1.01 Dozen

iv) Hooks 1.01 Dozen

v) Springs 1.01 Dozen

vi) Cap 1.01 Dozen

b) Umbrella Ribs

i) Big Fluted with Centre Clip 1.01 Dozen

ii) Small Fuluted 1.01 Dozen

iii) Big Solid with Side Clip 1.01 Dozen

iv) Small Solid 1.01 Dozen

v) Eyelates 1.01 Dozen

3 Umbrella Handles 1 Dozen

C649 Folding/straight Umbrella (Auto and/or Manual)

4 Polyester Tape width less than 2.5 Cms.

2.4 Yards

C650 Forged Eye Hoe (other than these covered by Sl No. 243 & 498)

1 MT 1 Carbon Steel Plate 1.6 MT


1.097 kg C651 Fork

2 Zinc 0.060 kg

C652 Fork Digging with socket 1Kg. 1 Non-Alloy Steel Round/ Billets 2Kg/Kg content in the export product.

C138

100 Pcs 1 Stainless Steel Strips 70.87 gms C653 Fountain Pen Nibs

2 Iridium Alloy Pen Points 0.288 gms

1 MT 1 Non Alloy / Alloy / Stainless Steel / Bars & Rods (including Rounds & Wire Rods) of relevant grade

1.056 MT C654 Non Alloy / Alloy / Stainless Steel Fully Threaded Rods (Ungalvanized / Galvanized) 2 Zinc (against export of

Glavanized Threaded Rods only) 0.040 MT

1 MT 1 Non-Alloy Steel Wire Rod (5.5mm to 20 mm dia)

1.05 MT/MT C655 Galvanized Curb Stake

2 Zinc 3% of net weight of Steel to be Galvanised.


0.998 kg C656 Gate Clip

2 Zinc 0.065 kg


1.223 kg C657 Gate Hold Back

2 Zinc 0.060 kg


1.045 kg C658 Gate Latch

2 Zinc 0.050 kg

1 Kg 1 Coper Scrap 1.05 kg/kg net contents of the material in the export product

2 Zinc 1.05 kg/kg net contents of the material in the export product

C659 German Silver Art-ware

3 Nickel 1.05 kg/kg net contents

C660 German silver utensils 1 kg 1 German silver 1.030 kg

C661 Gun metal valves 1 kg 1 Gun metal scrap 1.075 kg

100 pcs 1 Ball pen cap 102 Pcs

2 Ball Pen Barrel 102 Pcs

3 Mechanism 102 Pcs

4 Pan Clips 102 Pcs

5 Ball Pen Tip 102 Pcs

C662 Half Metal Ball Pen

6 Writing Inks 115 gms

1 Kg 1 High Carbon Steel Wire 1.15 Kg/Kg content in export

C663 Hand Sewing needles

2 Nickel Anode/'S' Nickel 0.011 kg/1000 Nos. of the hand Sewing Needles

1 kg 1 Cold Heading quality Aluminium Killed Steel Wire Rods

1.165 Kg./Kg. content in export

2 Zinc 0.01 Kg./Kg. of export

C664 Hardened Twin Thread Bright Zinc plated clear Passivated Steel screws

3 Misc. Items: Sodium Cyanide 99.99% Pure, Thread Rolling Dies, Punches, Lubricating/Cutting Oil

Limited to 5% of FOB Value

C665 Heavy Duty 9 Tons 1 kg MS 1 MS Rounds 1.10 kg

C139

Round content

2 MS Plates 1.20 kg

Tillers (Spring loaded without spring cultivator)

3 MS Angles 1.10 kg


1.060 kg C666 Heavy duty Fork latch

2 Zinc 0.065 kg

1000 kg 1 Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/waxing etc.


2 Zinc 62 kg

3 Sisal Core/ Sisal fibre 55 kg

4 Anti Rust Petroleum Based Lubricant OR

20 kg

4 a) Anti Rust Wax 6 kg

b) Anti Rust Lubricating Oil 14 kg

5 Dry Drawing Lubricant/ Coating 8 kgs

6 Tungsten Carbide Dies 5 Nos

C667 Galvanised Non alloy/ Alloy Steel Wire Ropes (fibre core)

7 Lead (for patenting) 3.30 kg

Note: 1. Items at Sl.No.5 to 7 shall not be allowed if the imported input is steel wire. 2. In case of galvanised steel wire ropes for oil, fishing and shipping industry if the product is as per ASTM A 603-70, for Class B and Class C coatings, the item Zinc shall be allowed two times and three times respectively of the Zinc quantity permitted above. 3. The CIF value of Lubricant shall not exceed 5% of FOB value.


1020 kg

2 Sisal Core/ Sisal fibre 55 kg



20 kg

4 a) Anti Rust Wax 6 kg

b) Anti Rust Lubricating Oil 14 kgs

5 Dry Drawing Lubricant/ Coating 8 kgs

C668 Non alloy/ Alloy Steel Wire Ropes (fibre core) (Un-Galvanised)


Note : 1. Items at 3, 5 & 6 shall not be allowed if the imported input is steel wire. 2. The CIF value of Lubricant shall not exceed 5% of FOB value.

1 MT 1 Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/waxing etc.

1020 kg


20 kg

C669 Non alloy/ Alloy Steel Wire Ropes (Steel Wire Core)

2 a) Anti Rust Wax 6 kgs

C140

b) Anti Rust Lubricating Oil 14 Kgs

3 Dry Drawing Lubricant/ Coating 8 Kgs



Note : 1. Items at Sl.Nos. 3 to 5 shall not be allowed if the imported input is steel wire. 2. The CIF value of Lubricant shall not exceed 5% of FOB value.



2 Zinc 62 kgs


20 kg

3 a) Anti Rust Wax 6 kgs

b) Anti Rust Lubricating Oil 14 kgs

4 Drawing Lubricant/ Coating 8 kgs


C670 Galvanised Non alloy/ Alloy Steel Wire Ropes (Steel wire core)


Note : 1. Items at Sl.Nos. 3 to 5 shall not be allowed if the imported input is steel wire. 2. In case of galvanised steel wire ropes for oil, fishing and shipping industry if the product is as per ASTM A 603-70, for Class B and Class C coatings, the item Zinc shall be allowed two times and three times respectively of the Zinc ingot quantity permitted above. 3. The CIF value of Lubricant shall not exceed 5% of FOB value.

1 MT 1 Mild Steel Scrap 0.90 MT

2 HC Ferro Chrome 292 kg

3 Ferro Moly (Mo-75%) 10 kg

C671 High Chromium Grinding media Balls for Cement Grinding Mills (Composition: Cr.-16-17%, Mo-0.6-0.7%, Si-0.6-0.7%, C-1.5-2.5%, Fe-Balance)

4 Fero Silicone (Silicon 75%) 10 kg

1 Tonne (Weight of seamless Tube)

1 Seamless Steel Tube of relevent grade

1.06 Kg/Kg content in the export product.

2 Relevant Cylinder Valves 1 No.

C672 High pressure Seamless Gas Cylinders

3 Relevant Nipples for Cylinder Valve

1 No.

1 kg 1 MS Sheet/Coil OR

1.20 kg C673 Hinges and parts thereof made of M.S. or Stainless Steel Stainless Steel Sheet/Coil 1.20 kg

1 kg carbon steel content

1 Carbon Steel 1.20 kg C674 Hoe Welded Eye a).Hoe Blade b).Eye 2 MS pipe 1.05 kg

C675 Hose Assemblies with End Metal Fittings

1 Meter 1 Reinforced Relevant Rubber Hose

1.01 Meters.

C676 Hot Dipped Galvanised Tension Bar/ Gate Rods/

1 kg 1 Re-rollable scrap of Usable Scrap/Billet Cuttings OR

1.15 kg.

C141

MS Billets/Blooms OR Non-Alloy Steel Wire Rods

1.12 kg. 1.07 kg

Truss Rods/ Drop Rods.

2 Zinc 0.03 kg

C677 Deleted

C678 Hurricane Lantern made of Tin plate

1 No. 1 Tinplate Waste 1.10 Kg per kg content in export

10000 Nos (of Dia/Gauge "X")

1 Stainless Steel Capillary Tube of Dia/Gauge "X" OR

440 Mtrs.

1 Stainless Steel Cannulae of Dis/Gauge "X" OR

10500 Nos.

1 Stainless Steel Strips (AISI 304L)


2 Polypropylene Granules 1.05 kg/kg content in export

a) Brass Scrap 1.075 kg/kg content in export

b) Nickel Plate 5 kgs

C679 Hypodermic Needles (Disposable or Reusable)

3 Misc. Items: Drills, Cut off Wheels, Grinding Wheels, Glue.



0.918 kg


C680 ILD Fork

3 Zinc 0.050 kg

1 kg. 1 Refractories porous plug/seat/blocks/sleeves/slide gate plate

0.0375Kg.

Hot Rolled MS Sheet/ Strips/ Coils

1.046 kg

C681 ILD Guide

2 Zinc 0.050 kg

C682 Deleted


0.602 kg


C683 Indust. Offset Bracket

3 Zinc 0.040 kg


1.030 kg


C684 Industrial Locking Device

3 Zinc 0.038 kg

1 No. 1 Mild Steel HR Sheet/Coil 1.10 kg/kg content in export

2 Mild Steel Rounds 1.05 kg/kg content in export


C685 Industrial Offset Hinge (Galvanised)

4 Zinc Upto 2% of weight of export

C686 Industrial Roller Chain(Above 1-1/4" Pitch

1 kg 1 CR-Non Alloy Steel Sheet/Coil/Welded/Seamless

1.556 kg.

C142

Non-Alloy Steel Tubes OR

1 HR- Non Alloy Steel Sheet/Coil 1.826 kg.

2 Alloy Steel Wire/Wire Rod in Coil

0.254 kg.

3 Spring Clip/Cotter Pin (Chain Component)

Net to Net

Size) including Spares.

4 Misc. Items: Grease, Rust, Preventive Oil, Punching & Piercing Tools, Extruder Dies & Die Inserts, Sizing Rolls, Stamping Punches, HcHCr D2 & D3 material HSS M2 material, H11 hot die steel, O2 oilSteel.

Upto 3% of FOB Value of exports.

1 kg 1 CR-Non Alloy Steel Sheet/Coil/Welded/Seamless Non-Alloy Steel Tubes OR

1.258 kg.

1 HR- Non Alloy Steel Sheet/Coil 1.479 kg.

2 CR Alloy Steel Sheet/Coil OR

0.156 kg.

2 HR-Alloy Steel Sheet/Coil 0.177 kg.

3 Alloy Steel Wire/Wire Rod 0.246 kg.


Net to Net

C687 Industrial Roller Chain(Above 3/4" Pitch and upto 1-1/4" Pitch) including Spares

5 Misc. Items:Grease, Rust, Preventive Oil, Punching & Piercing Tools, Extruder Dies & Die Inserts, Sizing Rolls, Stamping Punches, HcHCr D2 & D3 material HSS M2 material, H11 hot die steel, O2 hardened steel.


1 kg 1 CR-Non Alloy Steel Sheet/Coil/CHQ Wire in Coil OR

1.055 kg.

1 HR Non Alloy Steel Sheet/Coil/CHQ wire Rod in coil

1.240 kg.

2 CR Alloy Steel Sheet/Coil OR

0.153 kg.

2 HR-Alloy Steel Sheet/Coil 0.174 kg.

3 Alloy Steel Wire/Wire Rod 0.235 kg.


Net to Net

C688 Industrial Roller/Motor Cycle/Automotive Timing chain including spares (Upto 3/4" Pitch Size ).

5 Misc. Items: Grease, Rust, Preventive Oil, Punching & Piercing Tools, Extruder Dies & Die Inserts, Sizing Rolls, Stamping Punches, HcHCr D2 & D3 material HSS M2 material, H11 hot die steel, O2 oil hardenedsteel.


C689 Industrial Valve (Casr or Forged Body)

1 No. 1 1) Industrial X ray films (various grades of gamma rys iridium 192 and Cobalt 60 (B) For forged body/Trims/Cover - 1Kg

11.8Sq.CM 1.35Kg.

C143

2 Forging quantity carbon/non-alloy/alloy/stainless steel bars/rods/billets/blooms/ingot (relevant material)

1) For Stem (weight 1 Kg) Stainless Steel bar/rod of relevant grade

1.1Kg

2) For opertor (hand wheel/lever/wrench) (1Kg) Carbon Steel Rod/Pipe/Plate

1.02Kg.

3) Asbestos free graphite/PTFE packing/gsket

1 Set.

4) Miscellaneous items like Tungsten carbide tip tools, dies, drills, taps die blocks/hrd facing electrode/power

3% of the FOB value.

1 For 1Kg of weight of Body, Trim Ball, Gate, Plug Disc, Cover, Bonnet.

a) For Carbon/Non Alloy Steel casting (On the basis of net weight of the item and on net content) of items mentioned above:- Non Alloy Steel Melting Scrap OR

1.7Kgs.

1 b) For Stainless Steel Casting (On the basis of net weight of the item and on net content):-

A) Stainless Steel Scrap 0.863Kg.

B) Iron Flakes/pure Iron/Iron powder

0.387Kg.

C) Ferro Chrome/Charge Nickel Oxide sinter/Ferro Nickel OR

0.400 Kg

1 D) Ferro Chrome Nickel Ferro Manganese Ferro Molybdenum Ferro Silicon

0.0875Kg. 0.125Kg 0.0125Kg. 0.0625Kg. 0.025Kg.

E) For both Stainless Steel and Carbon /Non Alloy Steel Casting:- Additive comprising of core wire/scrap/Ingots/shots of Aluminium core wire/Lumps Powder of Calcium Silicide (CaSi)Lumps powder of misch metal Ferro Silicon/Ferro Silicon Ferro Manganese

0.05Kg for carbon steel casting and

F) Resin Coated Sand 0.45Kg for carbon steel, 1.563 Kg for Stainless Steel.

G) Organic binders 0.2Kg.

H) Welding Electrode 0.0125Kg.

I) Mold Wash/Mold Coat 0.03125Kg.

J) Grinding Wheel. 0.00625Kg.

1 No. 1 Hot Rolled Stainless Steel Plates 1.10 MT/MT content in export product

2 Boiler Quality Carbon Steel Plates

1.10 MT/MT content in export product

C690 Cryogenic Tank for Liquified Gases

3 Stainless Steel Pipes Net to Net

C144

4 Perlitte Insulating Powder Net to Net

5 CS Section Net to Net

6 SS Section Net to Net

7 Corrosion Resisting Bronze extended Stem Cryogenic Valves

Net to Net

8 Bronze Check Valve Net to Net

9 Safety Valve Net to Net

10 Pressure Building Regulator Net to Net

11 DP Level Gauge Net to Net

12 Misc. items: Welding Wire & Welding Flux

Upto 5% of the FOB value of export

1 No. 1 Bezel Net to net.

2 Watch Glass Net to net.

3 Plastic Movement Holder Net to net.

4 Back Cover Net to net.

5 Watch Chain/ Bracelet Net to net.

C691 Integrated Watch Cases with/without Chain

6 Side Bar Pin Net to net.

Note : 1. Item 5 to be allowed only when export product is accompanied with this item.

C692 Items manufactured out of GP Sheets

1 kg 1 GP Sheets/ Coils/ Secondary 1.050 kg

C693 Items manufactured out of tin plate

1 kg 1 Electrolytic Tin Plate/ Tin Plate Waste/ Waste

1.050 kg

1 kg. 1 MS Round 1.094 kg C694 J-Bracket

2 Zinc 0.035 kg

1000 pcs. 1 SS Strips/ sheets/ coils 1.05 Kg/Kg content in export

2 SS Wire/Nickel silver wire/Brass wire

1.05 Kg/Kg content of relevant material in export

3 SS Balls/Tungsten Carbide Ball/ Ceramic Balls

1020 No. relevant in export

4 ABS Powder 1.05 Kg/Kg content in export

5 Brass Tube/Rod Strip/Scrap 1.05 Kg/Kg content in export

6 Derlin powder/polyacetal Resin 1.05 Kg/Kg content in export

7 Refill Ink OR

1.02 Kg/Kg content in export

7 a) Ketonic Resin/Synthetic Resin 0.40 Kg/kg of ink content

b) Glycol 0.40 Kg/kg of ink content

C695 Jotter Ball Point Pen.

c) Dyestuff 0.10 Kg/kg of ink content

C696 Jotter refills 1 kg. 1 Copper tube 1.050 kg

1000 Sets each (34.5 kgs)

1 Aluminium Rods OR

37.95 kgs OR 36.225Kgs.

C697 Knitting Needles/ Pins-Double ended made out of Aluminium

1 a) Aluminium Wire (Not below 36.225Kgs.

C145

3mm)

1000 Nos/Pairs (5.714 Kgs)

1 Aluminium Rods OR

6.285 kgs C698 Knitting Needles/ Pins-knobbed made out of Aluminium

1 a) Aluminium Wire (Not bwlow 3mm)

5.999Kgs.

C699 Knitting Needles/ Pins-knobbed Plastic

1000 Nos/Pairs (12.0 Kgs)

1 Relevant Plastic material 12.6 kgs

1 MT 1 HR/CR CA Steel Sheet/Coils/Strips

1.46 MT C700 Lever Latch for Locking Ring

2 Zinc 4% of the net weight of the steel to be galvanised.

Note : Import item 2 i.e. Zinc to be allowed only in case the export product is galvanised.

C701 Locks and valves water pipe filling

1 kg 1 Pig Iron 1.100 kg

1 kg. 1 Cold Rolled MS Sheets/ Strips/ Coils

1.069 kg C702 Loop cap

2 Zinc 0.115 kg

1 kg. 1 Pig Iron 0.970 kg C703 Loop Cap

2 Zinc 0.030 kg

1 No. 1 Valves OR

Net to Net

1 Brass Scrap 1.12 Kg/Kg content in export product.

2 HRMS Sheet/ Plates OR HRMS Cells

1.35 kg/Kg content in the export product. 1.35 kg/Kg content in the export product.

3 M.S. Round Bars 1 Kg/Kg content in the export product.

4 Zinc Ingot 0.17 kg per Cylinder.

C704 LPG Cylinders with/or without valves

5 Misc. items: Copper Coated Steel Wire of dia 3.15mm and 0.8mm, Welding Flux/ Rod, L.D.O., Primer Point, Shot/ Grits, D.D. Compound


Note 1. Item No. 1 will be allowed if Cylinders are exported with Valves. 2. Zinc Ingot will be alowed if the Cylinders are exported with Zinc coating. 3. Packing material may be allowed as per packing policy.

C705 M.S. Fish Plate 1 Pair 1 M.S. Billets 1.12 kg/kg content in the export product.

1 kg 1 Colled Rolled Mild Steel Strips 1.05 Kg./Kg. content in export product

2 Spring Steel Wire 1.05 Kg./Kg. content in export product

3 P P Granules 1.05 Kg./Kg. content in export product.

4 Grey/ Pulp Board (Furniture Grade)


5 Powder Paint (Solid based) 1.05 kg/kg content in the export product.

C706 M.S. Tubular Folding Furniture with Plastic Fittings

6 Relevant PVC Fabrics 1.02 kg/kg content in

C146

the export product.

7 Relevant PU Foam 1.02 kg/kg content in the export product.

8 Relevant Synthetic Fabric (Polyester Based)


Note: Import of powder paint (Solid Based) will be allowed @1.05 kg/kg content for furniture having powder paint coating only.

1 Kg 1 CRCA/HR Mild Steel Sheets/ Coils/Strips(including Seconds/Defective).

1.50 Kgs C707 M.S. Washer Galvanised/painted

2 Zinc OR Paint OR Coating Powder

0.04 Kg (Hot dip Galvanised or 0.01Kg if Electro Plated). OR 4% of the FOB value.

Note.1 : Import of CRCA is allowed only if the export product is made out of CRCA.


0.674 kg


C708 Male Bracket

3 Zinc 0.040 kg


0.674 kg


C709 Male Hinge/ Male Bracket

3 Zinc 0.040 kg

1 kg. 1 MS Round 1.094 kg C710 Male Lag Bracket

2 Zinc 0.035 kg

1 kg 1 MS HR Sheets/Coils 1.06 kg/kg content in export

2 MS Rounds 1.20 kg/kg content in export


C711 Malleable Box Hinge

4 Zinc 0.037 kg/kg of galvanised items in the export product

1 No. 1 ABS Moulding Powder/Granules 1.05 kg/kg content in the export product.

2 Poly Acetal Moulding Powder/Granules


3 Polycarbonate Moulding Powder/Granules


4 PMMA(Polymethyl- Methacrylate Moulding Powder Granules)


5 Transistors Net + 2% wastage.

6 Flash Kit Module, consisting of PCBs, Capacitors, Trsnsformers, Triggers Coils, Neon Capacitor, Triggers, Diode Resistors, Triggers, Contact & Flash Tube

Net + 2% wastage.

7 Phospher Bronze Scrap 1.05 kg/kg content in the export product.

8 Anodised Aluminium Reflector Sheet/Coil


C712 Manually Operated 35mm Camera with Built in Flash

9 Taking Lens Front & Rear Net to net.

C147

10 Neon Window Net to net.

11 Springs Set(of 8) Film Counter, Shutter Sector, Pressure Plate,Sprocket Axle, Lens Covers 22Screws (8 No./Set)

Net + 2% wastage.

12 Screws (8 No./Set) Net + 2% wastage

1 No. 1 Carbon steel Hot Rolled Sheets/Plates BS 4360 50B & IS 1079 ST 34 6.4mm to 3mm thickness

786.50 kg

2 Hot Rolled Alloy Steel Sheets/ Plates Carton-A 2mm & 1.5mm thick

905.30 kg

C713 Marine freight containers of type ICC 20'x8'x8.5'

3 Paints 60 Ltr

C714 Mechanical Watch Movement Automatic Day & Date

1000 Nos 1 Movement Components Net to net

1 No. (1000 ml)


2 Tin Plates 1.10 kg/kg content in export product

3 Chemicals for Glass Shell:

a) Borax 80 gms.

b) Selenium 2 gms.

c) Arsenic 2 gms.

d) Soda Ash 100 gms.

e) Sodium Silico Fluoride 25 gms.

f) Silver Nitrate 1.5 gm.

g) Caustic Soda 25 gms.

C715 Metal Casing Vaccum Flasks (Made from Tin Plates)

h) Silicon Oil 0.5 gm.

C716 Metal Clips for Pens. 1 kg 1 S S Strips 1.05 kg

100 pcs 1 Barrel 102 Pcs

2 Cap 102 Pcs

3 Clips 102 Pcs

C717 Metal Fountain Pens

4 Printing Ink 1.05 gm

1 No. 1 M.S. Sheet Defective Tin Free(For Box)


2 M.S. Sheet (For Compase) 1.05 kg/kg content in the export product.

3 PVC Granules (For Trey) 0.8 kg/kg content of PVC Trey.

4 Polystrene (For Plastic Article) 1.05 kg/kg content in export.

C718 Mathematical Instrument Box with/without PVC Trey

5 Poly Propylene 1.05 kg/kg content in export.

C719 Mild Steel Hollow Rivets 1 kg 1 Mild Steel Wire/Wire Rods 1.2 kg

C720 Mild Steel Rivets 1 kg 1 Mild Steel Wire/Wire Rods 1.06 kg

C721 MS Aldrop-Nickel Plated 1 kg 1 CRCA Sheet/Second Grade 1.30 kg/kg of net content in the export product.

C148

2 Low Carbon Wire Rod 1.12 kg/kg of net content in the export product

3 Nickel 0.01 kg/kg of the steel to be plated

1 kg 1 M.S. Wire Rod 1.05 kg.

2 Nickel OR

0.97% of weight of Steel to be Nickel Plated. OR

Zinc OR

0.97% of weight of Steel to be Zinc Plated. OR

Copper OR

0.97% of weight of Steel to be Copper Plated. OR

C722 M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated

Powder Paint 0.97% of weight of Steel to be Powder Painted

C723 MS Colour coated Ghamala(made of HR Sheet)

1 MT 1 H R Sheets 1.16 Tonne

C724 MS Drum 1 kg 1 CRCA Sheet 1.050 kg

C725 MS Paper pin & Clip 1 kg 1 M.S. wire 1.05 kg

C726 MS Washer 1 kg 1 CRCA/H.R. Mild Steel Sheets/ Strips/Coils (including seconds and defective).

1.50 kg

Note : 1. In case, the export product is Hot Dip galvanised, in addition to above items, an additional item Zinc shall be allowed @ 4% of net weight of Steel in the export product. In case the product is electroplated, Zinc shall be allowed @ 1% of net weight of steel in export.

C727 MS Window, Door Ventilator, Grate/ Grills, Fabricated Frames and components thereof

1000 kg 1 Non Alloy Steel Billets 1070 kg

1000 Nos. 1 Steel strips 25CrM04/RST3/ CK15/C15M/ equivalent

57.42 kg.

2 Steel wire SAE 2100/100CR6/SUJ2/ equivalent

60.19 kg.

C728 Needle Roller Bearing 25 mm to below 50 mm I.D.

3 Miscellaneous Items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda

upto 5% of FOB value of exports.

1000 Nos. 1 Steel Strips to 25CrM04/RST4/RST3/ CK 15/CI15M/ equivalent

19.25 kgs.

2 Steel wires to SAE 52100/100CR6/ SUJ2/equivalent

5.60 kgs.

3 Steel cage 1100 Nos.

C729 Needle Roller Bearing Type BK/ HK/SCE/SCH below 25 mm I.D.

4 Misc. Items: Grinding Wheel, upto 5% of FOB

C149

Work Rest Blade, Green Silicon, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda

value of exports.

1000 Nos. 1 Steel Strips 25 CrM04/RST4 RST3/CK15/C15M/ equivalent

54.95 kg.

2 Steel cage 1100 Nos.

3 Steel Wire SAE 2100/100CR6/SUJ2/ equivalent

23.90 kgs.

C730 Needle Roller Bearing Type BK/ HK/SCE/SCH/MNJ 25 mm I.D.

4 Misc. Items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda


1000 Nos. 1 Steel Strips 26CrM04/RST3/ CK15/C15M equivalent

18.05 kg

2 Steel Wire SAE 52100/100CR6/ SUJ2 equivalent

9.57 kg.

C731 Needle Roller Bearing Type BU/ HN/BN/HV below 25 mm I.D.

3 Misc. Items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda


1000 Nos. 1 Steel Strips 25 Cr MO 4 Rst4 or equivalent

31.69 kg.

2 Steel Wire SAE 52100/100 Cr16 or equivalent.

16.17 kg.

C732 Needle Roller Bearings type - KZK upto 30 mm OD

3 Misc. items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemicals, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing compounds, Soda Ash, Caustic Soda, Coolant, Blackening Salt, Hydraulic oil, Trichloro ethylene.

Limited to 5% of FOB Value of exports.

1000 Nos. 1 Steel Tubes SCM 415/Rst 3/C15/STKM or equivalent

34.92 kg

2 Steel Wire SAE 52100/100 Cr6 or equivalent

8.3 kg

C733 Needle Roller Bearings Type -K/KBK upto 20 mm OD.

3 Misc. Items:Grinding Wheel, Work Rest Blade, Green Silicon Carbide,Rust Preventive Chemicals, Molykote DX, Packing Grease, Carbide Tips,O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon,Polishing compounds, Soda Ash, Caustic Soda, Coolant,

Limited to 5% of FOB Value of exports.

C150

Blackening Salt, Hydraulic oil, Trichloro ethylene.

1 kg 1 kg 1 kg

For (a):

1 Steel wire to SAE 52100/100 CRG/ SUJ2/equivalent

1.45 kg.

2 Misc. items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda


For (b):

1 Steel Wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent

1.28 kg



For (c):

1 Steel Wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent

1.21 kg

C734 (a) Needle Rollers upto 4 mm Dia (b) Needle Rollers above 4 mm to 8mm Dia © Needle Rollers above 8 mm Dia



C735 Needle Screws Self colour or Plated

1 kg 1 High Carbon and high chromium Steel wire

1.200 kg

1 MT 1 MS Seconds defective sheets/coils strips


2 M S Wire 1.05 MT/MT content in export

C736 Nickel Plated M S Buckles

3 Nickel Limited to 1% of weight of resultant product

C737 Non-Alloy Steel Wire Nails (excluding Stainless Steel)

1 M.T. 1 Non Alloy Steel Wire Rod (excluding Stainless Steel Wire Rod)

1.1 MT

C738 Nuts/Bolts/ Screws made of Stainless Steel of variety-x

1 kg 1 Stainless steel Rods/ Wire Rods/ Wire/ ingots of variety-x

1.27 kg

C739 Nyloc Self Locking Nuts, Steel Locking Nuts and Wheel Nuts made from

1 MT 1 EN/ AISI/ DIN/ JIS Series Steel excluding Stainless Steel in the form of Wire Rods/HEX Bars in Coils and /or Straight length

1.939 MT

C151

EN/ AISI/ DIN/ JIS Series Steel excluding Stainless Steel

1 kg. 1 Cold Rolled MS Sheet/ Strips/ Coils

0.884 kg

2 MS Plate 0.354 kg

C740 Offset Rail End

3 Zinc 0.042 kg

1 kg 1 Tin Plate Prime 1.300 kgs C741 OTS cans for packing 50 - 500 gms of instant Coffee

2 Lining Compound 0.015 kg

1 kg 1 Electrolytic tin plate 1.10 kg

2 Lining Compound 0.015 kg

C742 OTS Cans/ dingeley cans (Seam Welded).

3 Tin plate Lacquer 0.009 ltr

Note: Item No 3 shall be allowed in case of export of Lacquered Can

C743 Oxygen Cylinder dia 140 MM

1 No. 1 Hot Rolled CRMO Seamless SteelTube/Pipes.

1.29 kg

C744 Oxygen Cylinder dia 229 MM

1 No. 1 Hot Rolled CRMO Seamless SteelTube/Pipes.

1.663 kg

1 Number. 1 MS CRCA sheet/ coil/ strips including seconds/ defectives but excluding coated


2 MS Plates 1.08 kg/kg content in the export product.

3 Mild Steel Angles/Shapes/Section.


C745 Paddy Thrasher

4 MS Rounds 1.10 kg/kg content in the export prdouct.


1.010 kg C746 Panel Clamp

2 Zinc 0.065 kg

C747 Panels made of CRCA Sheets

1 kg. 1 Mild Steel CRCA Sheets/ Cuttings/ Coils


Note: In case the export product is Epoxy coated, Epoxy powder upto 4% of FOB value of exports shall also be allowed.

C748 Paper Punch 1 kg 1 Cold Rolled Non Alloy Steel/ Strips/Sheets.

1.56 kg

1 kg 1 Brass Scrap OR


C749 Pen Barrels

1 S S Steel tubes 1.02 kg/kg content in the export product.

1 kg 1 Brass Scrap OR


C750 Pen Caps

1 S S Steel Tubes 1.02 kg/kg content in the export product.

1 MT 1 Non-Alloy Steel Billets / Ingot / Blooms / Slabs OR

1.10 MT/MT content in the export product.

C751 Perforated Construction Stakes (Round /Flat/ Square)

Non-Alloy Steel Bars & Rods (Round / Flat / Square including in coil form)/ Wire Rods


C752 Photo frame made of Brass.

1 kg 1 Brass Sheet 1.190 kg/kg content of Brass in the export product.

C152

2 Tin/Nickel. The CIF Value taken together may be restricted to 4% of the FOB value.

3 Hard Board. 1.200 kg/kg content in the export product.

4 Glass 1.200 kg

C753 Photo-Engraving Zinc Sheets

1.0 Kg 1 Zinc Ingot 1.04 kg./kg content of Zinc in export

1 kg 1 Aluminium Sheet/Coils 1.1 kg/kg content in the export product.

2 LDPE 1.05 kg/kg content in the export product.

3 Printing Ink 0.020 kg

C754 Pilfer Proof Caps-Plain/Printed with E.P. Liners

4 Coating Laquer/Varnish 0.045 Ltr.

"Note: The import item No. 3 i.e. Printing Ink will be admissible only when export product is printed."

C755 Deleted

C756 Deleted

C757 Deleted

C758 Deleted

C759 Deleted

C760 Deleted

C761 Deleted

C762 Deleted

C763 Deleted

C764 Deleted

C765 Deleted

C766 Deleted

1 MT 1 High Tensile Steel and Mild Steel Billets/Angles/Plates

1.05 MT C767 Pole Line Hardware Fittings & Accessories (Galvanised) 2 Unwrought Zinc 0.05 MT

1 kg. 1 Cold Rolled MS Sheets Strips/ Coils

1.033 kg C768 Post Cap

2 Zinc 0.115 kg

1 kg. 1 Pig Iron 0.970 kg C769 Post Cap

2 Zinc 0.030 kg

1 Sq. mt 1 Aluminium Sheet 1.05 kg/kg content in the export product.

C770 Presensitised Positive Offset Aluminium plates

2 Diazo 2.76 gms/sq mts

C771 Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass

1 kg 1 Brass Scrap 1.075 kg

C772 Primary/ Secondary Blades of Shaving system cartridges (for Twin

One Million Nos.

1 CRSS Strips 433 kgs

C153

Blade)

1 kg 1 Tin Plate Prime 1.30 kg

2 PVC Compound 1.05 kg/kg content in the export product.

C773 Printed Lug Cap with Internal Coating Lined with PVC compound

3 Terpentine 0.135 Ltr.

1 MT 1 Non-Alloy Steel Rod 1.05 MT/MT content in the export product.

2 Zinc Ingot 4% of net weight of steel to be galvanised.

C774 PVC Co-extruded Galvanised Non- Alloy Steel Wire

3 PVC Resin 0.8 kg/kg of PVC compound in export.

C775 Racks made of CRCA Sheets



1.05 kg

1 kg. 1 Cold Rolled MS Sheet/ Strips/ Coils

0.884 kg

2 MS Plate 0.354 kg

C776 Rail End

3 Zinc 0.042 kg


1 Non-Alloy Steel Round/ Billets OR

1.250 kg C777 Rakes/Garden Rakes/ Fork Manure Hooked

HR Sheets/Coils(Seconds) 1.10 kg.

C778 Rectangular tops fitted with screw neck & handle and bottoms

1 kg of Top and Bottom

1 Electrolytic Prime quality Tin Plate

1.20 kg

C779 Rectangular/ Square Tin Plate container and/ or components thereof

1 Kg 1 Electrolytic Tinplate waste/waste 1.10 kgs

C780 Rectangular/Square Tin Plate container and/or component thereof with round neck.

1 Kg 1 Electrolytic Tinplate waste/waste 1.15 kgs

1 kg Ring, Lid and Matching Bottom Piece(excluding Tagger)

1 Electolytic Prime Quality Tinplate/ Tin Plate Waste/ Waste`


2 Lining Compound (Item to be specified)

3 gms

C781 Rings, Lid and Tagger Assemblies with or without Tagger (with or without matching Bottom Piece) made of Tin Plate

3 Aluminium Foil 1.08 kg/kg content in export product

C782 Round Tin Containers (other than OTS cans) and parts thereof

1.0 Kg 1 Electrolytic Tinplate Waste/Waste

1.15 kg

C783 Round tops/ ends (bottoms) of containers made of Tin Plate

1 kg 1 Electrolytic Prime Quality Tin Plate/ Tin Plate Waste/ Waste

1.25 kg

C784 Rounda File System 1 MT 1 ABS Moulding Powder(Injection Moulding Grade)

1.05 MT/MT content in the export product.

C154

2 Non-Alloy Steel Rounds 1.80 MT/MT content in the export product.

3 Ball Bearing(Relevant) Net to net.

4 M.S. Tube/Pipe 1.05 MT/MT content in the export product.


0.250 kg


C785 Rubber Wheel

3 Zinc 0.030 kg


1.010 kg C786 Saddle Clamp

2 Zinc 0.065 kg

C787 Sanitary and bathroom fittings made out of Brass/aluminium

1 kg 1 Brass/Aluminium Scrap OR Brass/Aluminium Ingot.

1.075 kg OR 1.05Kg/Kg.

C788 Sanitary and bathroom fittings (of gun metal)

1 kg 1 Gun metal scrap OR Gun metal Ingot.

1.075 kg OR 1.05Kg/Kg.

1 kg 1 Brass Ingot OR

1.12 kg/kg content of Brass in export product.

Brass Scrap 1.15 kg/kg content of Brass in export product.

C789 Sanitary and Bathroom Fittings including parts/Components thereof made of Brass (Nickel/Chrome Plated).

2 Nickel/Chrome Upto 0.5% of the net weight of the export product.


1.018 kg C790 Scrool

2 Zinc 0.075 kg

1 MT 1 Stainless Steel Bars/ Billets/ Blooms

2.0 MT

2 Band Saw Blades 0.74 Nos

3 Glass Powder 42.00 kg

4 Lubricating Oil for Cold Pilgering

3.00 Gallons (13.638 Ltrs)

5 Billet Radiusing Inserts

C791 Seamless Stainless Steel Tubes (Cold Finished)

6 BTA Heads

Import of item 5 & 6 together is restricted to a maximum value of 3% of total FOB value

1 MT 1 Nickel Oxide/Ferro Nickel 0.308 MT

2 MS Melting Scrap 2.0625 MT

3 Band Saw Blades 0.74 No

4 Glass Powder 42.00 Kgs

C792 Seamless Stainless Steel Tubes (Cold Finished) (Stainless steel grade-304/304L/321)

5 Lubricating Oil for Cold pilgering

3 Gallons (13.638 Ltrs)


2 Molybdenum Oxide/ Ferro Molybdenum

0.078 MT



C793 Seamless Stainless Steel Tubes (Cold Finished) (Stainless steel grade-316/316L/316 TI)


C155

6 Lubricating oil for Cold Pilgering 3 Gallons (13.638 Ltrs)

1 MT 1 Stainless Steel Bars/ Billets/ Blooms

1.50 MT

2 Band Saw Blades

3 Glass Powder

4 Billet radiusing inserts.

C794 Seamless Stainless Steel Tubes/ Pipes (Hot Finished)

5 BTA Heads

Note : The quantity permissible in respect of import items at Sl. No. 2,3,4, and 5 taken together will be restricted to 4% FOB value of exports




C795 Seamless Stainless Steel Tubes (Hot Finished) (Stainless steel grade -304/304L/321)



2 Molybdenum Oxide/Ferro Molybdenum

0.055 MT


4 Band Saw Blades 0.52 No.

C796 Seamless Stainless Steel Tubes (Hot Finished) (Stainless steel grade -316/316L/316TI)


C797 Seamless Steel Pipes and Tubes (other than Stainless Steel) Hot Finished.


1 Alloy/ Non-Alloy Steel Billets/ Rounds/ Bars

1.20 kg

C798 Seamless/Butt Welded Steel Pipe Fittings made from Seamless/ ERW Steel Tubes.

1 MT 1 Alloy/ Non-alloy Steel seamless/ ERW Tubes/Pipes


C799 Self Tapping Screw 1 kg 1 MS Wire Rod 1.17 kg

C800 Sewing Machine Needles 1 kg 1 High Carbon Steel Wire Annealed and Fully Spheroidised in 2.033 mmDiameter or Diameter of the Wire to be used/required


C801 Shaft "A" (Part of Computer Printer)

1 MT 1 Steel Rod AISI 12L 14 1.10 MT/MT content in the export product.

C802 Shoe tacks made of CRCA

1.0 Kg 1 CRCA Sheets/ Coils/ Strips/ seconds/ defective

1.05 Kg

C803 Shoulder Bolt made out of CHQ Alloy Steel/ Stainless Steel

1 Kg 1 Relevant CHQ Alloy Steel/ Stainless Steel Wire Rods in coils or Bars

1.65 Kgs

C804 Deleted

1 kg 1 M.S. Wire Rod 1.05 kg/kg content in export.

C805 Shuttering Clamps/ Column Clamps

2 H.R. Sheets/Coils 1.05 kg/kg content in export.

C806 Folding Bed made of Mild Steel

1 kg 1 MS Defectives (Hot rolled only) 1.050 kg

C807 1 Kg 1 Alloy Iron powder 1.0531 Kg

C156

2 Solid Lubricant 0.0106 kg

3 Lubricating Oil 0.0318 kg.

Sintered Alloy Iron Bushes & Parts

4 Misc. Items: Natural Graphite Powder/Manganese Sulphide Powder, Jig Grinding Wheels and Honing Stones

CIF Value not to exceed Rs. 1.70/kg of product exported.

1 kg. 1 Hot Rolled MS Sheets/ Strips/ Coils

0.962 kg C808 Sleeve

2 Zinc 0.115 kg


1.045 kg C809 Sleeve Bracket

2 Zinc 0.050 kg

1 Kg 1 Brass Strips 1.15 kg./kg content in export product.

C810 Snap Fastners consisting of Stud & Socket

2 Phosphor Bronze Wire 1.04 kg./kg content in export product.

1 MT 1 ABS Copolymers 1.05 MT/MT content in export.

C811 Snap Off Blade Cutter of different size

2 Snap Off Blades of relevant size Net to net.

1 No. 1 Reflective Cloth Net + 15% wastage.

2 Diffusion Cloth Net + 5% wastage.

3 Nylon Ribbon 1" Net to net.

4 ABS Moulding Powder Net + 5% wastage.

5 CRCA Sheet Net + 10% wastage.

C812 Soft Box (for use with Electronic Studio Flash Lights)

6 Carbon Steel Pipe Net + 2% wastage.

C813 Spade/Shovels 1Kg. 1 Non AlloyHR/CR Steel Sheets/Strips/Wide Coils OR Stainless Steel Sheets/Strips/Wide Coils

1.10Kg/Kg content of relevant steel in the export product.

1 No. 1 Compressor 1 No.

2 Bearing Assembly 1 No.

3 Grill Assembly (in) 2 Nos.

4 Grill Assembly (out) 1 No.

5 Air Filter 2 Nos.

6 Panel Assembly (Ornament) 1 No.

7 Panel Side RH 1 No.

8 Panel Side LH 1 No.

9 Propeller (Fan) 1 No.

10 Couplers Set/Valve Shut-off (14 Pieces)

1 Set.

11 Control Assembly 1 No.

12 Copper Tube 1.01 kg/kg content in export product

13 Fractional HP Motor (O) 1 No.

14 Steel Sheets (GP & CRCA) 1.05 kg/kg content in export product

15 Capacitor-36 MFD, 440 V. 1 No.

16 Fractional HP Motor (I) 1 No.

C814 Split Air Conditioner capacity (1.5 Ton & above)

17 Copper Corollary 0.35 kg.

C157

18 Turbo Tube 1 No.

19 Aluminium Foils 1.02 kg/kg content in export product

20 Eco-Friendly Refrigerant Gas Net to net

21 Syncronous Motor 1 No.

22 Powder Paint Within 0.5% of FOB value of export product

1 No. 1 Aluminium Foil Formed:

a) Rectangular/Square Grid 1.07 Sq.ft./Sq.ft. content in export.

b) Round Grid 1.07 Sq.ft./Sq.ft. content in export.

C815 Spot Grid

2 CRCA Sheet 1.10 kg/kg content in export.

10000 Nos. 1 Stainless Steel Capillary Tubes/Wires 30G-16G size


2 Grinding Wheel 600-1000 Grit size

0.05 No.

C816 Stainless Steel Cannulaes made out of Stainless Steel Tubes/Wires

3 Glass Beads 1 kg

1 kg 1 C R Stainless Steel Sheets/Coils AISI 304


C817 Stainless Steel Casserole with copper bottom of different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in

export product

C818 Stainless Steel Collar for electric lamps

1 MT 1 Stainless Steel Strips of relevant gauge


1 Kg 1 Non-Magnetic Stainless Steel/Magnetic Stainless Steel (only relevant grade of stainless steel to be allowed)

1.40 Kgs

2 Misc.Items:

C819 Stainless Steel Cutlery with or without handle irrespective of what material the handle may have been ma de of.

Die-Steels & HSS cutting tools, Coated abrasive cloth belts, brushes & Wheel, Non-woven cloth pads, wheels & brushes (both impregnated & non- impregnated), Sisal Fibre and Sisal Buffs & Bonded Emery Grinding wheel

CIF value Limited to 5% of FOB value

C820 S.S. Fabricated/Welded Pipes/Tubes

1 MT 1 Stainless Steel Plates/Sheet/Strips/Wide Coils of relevant grade & specification

1.10 MT

C821 Stainless Steel Fabricated Tower Packing

1 MT 1 Cold Rolled Stainless Steel Wide Coils of relevnt grade in various thickness

1.05 MT/MT content in the of export product.

1 Kg. 1 Stainless Steel Sheet 0.89 Kg

2 Polypropylene 0.081 Kg

3 Silicon rubber for 'O' ring 0.015 Kg

4 Natural rubber 0.011 Kg

C822 Stainless steel FJ-500 Food Jar with Polypropylene cup & stopper

5 Printed Carton boxes Net to net

1 kg 1 Stainless Steel Sheets conforming to AISI 304


C823 Stainless Steel Frypan with copper bottom of different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in

export product

C158

1 kg 1 Magnetic/ Non Magnetic Stainless Steel Sheets/Coils (only relevant material and grade of Stainless Steel to be allowed)

1.30 kg

2 Miscellaneous Items: CIF Value Limited to 5% of FOB Value

Die Steel & HSS Cutting Tools,

Coated abrasive cloth belts, brushes & wheels,

Non - woven cloth pads, wheels & brushes (both impregnated & non - impregnated),

Sisal Fibre & Sisal Buffs &

C824 Stainless Steel Hospital Wares (Other than those covered by Sl.No 825 )

Bonded Emery Grinding Wheels

1 kg 1 Magnetic/Non/magnetic Stainless Steel Coils/Sheets (only relevant material and grade of stainless steel to be allowed)

1.125 kg

2 Misc. Items: CIF Value Limited to 5% of FOB Value

Die Steel HSS Cutting Tools,


Non-woven cloth pads, wheels & brushes (both impregnated & non- impregnated,


C825 Stainless Steel Hospital Wares (Rectangular/Square with straight edges)

e)Bonded Emery Grinding Wheels

C826 Stainless Steel Kitchen Sinks.

1Kg. 1 Stainless Steel Sheets/Wide Coils of relevant grade

1.45Kgs.

1 kg 1 Stainless Steel Sheet/Wild Coil AISI 420

1.125 Kg./Kg. content in export product.

C827 Stainless Steel Knives of various sizes

2 Polypropylene 1.05 Kg./Kg. content in export.



C828 Stainless Steel Pressure Cooker with Copper Bottom/ Capsuled Bottom (Sandwich Bottom) of different sizes

2 Copper Sheets 2 MM 1.05 kg/kg content in export product

1 Million (double edge blades)

1 Cold Rolled Medium/ High Carbon Martensitic Stainless Steel Strip in Coils (thickness: 0.10 +/- 0.005mm, width: 22.38+0.02/-0.00mm OR

988 Kgs.

1 Cold Rolled Medium/ High Carbon Martensitic (Semi-finished) Stainless Steel Strips in coils (Thickness: 0.8-0.9mm, width: 310-340mm) OR

1295 kgs

C829 Stainless Steel safety razor Blades

Hot Rolled Medium/ High Carbon Martensitic Stainless Steel Strip in coils (Thickness: 3.3-3.5mm, Width: 310-340mm)

1522 kgs

C159

2 Cellulose Film/BOPP Film (Wrapper for packing)

40 kgs

3 Hanging Cards (20 tucks in a card)

10500 Nos

4 Tucks (5 blades) 210000 Nos

5 Vydax/Krytox 0.700 Kg

6 Alumina Abrasive Grinding Wheels (OD 205 mm Maximum x ID 55 mm Minimum x Width 130 mm Maximum)

2 Pcs

Note.1. Import of handle may also be allowed on net to net basis with accountability clause where the product is exported alongwith the handle.



C830 Stainless Steel Saucepan with copper bottom of different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in

export product

1 MT 1 Seamless Stainless Steel Tubes/Pipes (Hot Finished) (OD not less than 42 mm)

1.35 MT C831 Stainless Steel Seamless Tubes/Pipes (Cold Finish)

2 Consumables viz. Band Saw Blades/ Lubricating Oil


1 kg 1 Magnetic/Non-magnetic Stainless Steel Sheet/Coils



Die steel & HSS Cutting Tools,


Non-woven cloth pads, wheels & brushes (both impregnated & non - impregnated),


C832 Table, Kitchen & other household articles made of Stainless Steel with or without handle/ Iid/ antiskid gasket irrespective of what material the handle/Iid/ antiskid gasket may have been made of (other than those covered under the SION C-833)


1 KG 1 Magnetic/Non-magnetic Stainless Steel Sheet/Coils



Die Steel HSS Cutting Tools,


Non-woven cloth pads, wheels & brushes (both impregnated & non - impregnated),


C833 Table, Kitchen & other household articles made of Stainless Steel with or without handle/ Iid/ antiskid gasket irrespective of what material the handle /Iid antiskid gasket may have been made of (rectangular/ square with straight edges)


1 Kg 1 Stainless Steel Coils AISI 304 Gr. 0.4 mm to 1 mm Thickness

1.45 Kg/Kg Content in Export

2 Getter Pills Net to net

3 Polypropylene/Polyethylene Granules/Moulding Powder


4 Nylon Belt Net to net

5 Relevant packing materials 1.05 Kg/Kg content in export

C834 Stainless Steel Vacuum Flask

6 Silicon Rubber Net to Net

C160

7 Rubber Band (Natural Rubber) Net to Net

8 Relevant Screw & Nut Net to Net

9 Vaccum powder 1.05 Kg/Kg content in export

C835 Stainless Steel Watch Straps

1.0 Kg 1 Stainless Steel Coils 1.20 Kgs

C836 Stainless Steel Water Filter of various capacities with/without candles

1 No. 1 Stainless Steel Sheets/Coils of relevant grade

1.30 kg/kg content of stainless steel in the export product.

C837 (a) Stainless Steel Welded and Cold Drawn Tubes and Pipes (b) Stainless steel welded Corrugated Hose Pipes

1 MT 1 For export item (a) Stainless Steel Wide Coils/Strips of relevant grade for export item (b) Stainless Steel Wide Coils/Strips of relevant grade

1.20 MT 1.25 MT

C838 Deleted

1.0 Kg 1 Stainless Steel Rod 1.07 Kg

2 Dry Drawing Lubricant/ coating .009 Kg

3 Wire Drawing Soap .008 Kg

4 Tungsten Carbide Dies .001 No

5 Wet Drawing Lubricant/ Coating .004 Kg

C839 Stainless steel wire rope (from wire rod)

6 Diamond Dies/ Compax dies .004 No

Note:- Import of Items at Sl.No. 5 & 6 shall be allowed only against export of thinner stainless steel wire Ropes of size below 1 mm.

1 kg 1 Cold Rolled Steel Strips/Sheets 1.65 Kg C840 Stapler

2 Spring 0.01 kg

C841 Deleted

1 kg. 1 Hot Rolled MS Sheet/ Strips/ Wide Coils


2 Non Alloy Steel Round/Billet 1.10Kg/Kg content in the export product.

C842 Steel Clamp (Galvanised)

3 Zinc 0.04Kg.

1 Kg 1 Hot Rolled Mild Steel/Stainless Steel Sheet/ Strips/ Coils

1.05 Kg/Kg content of relevant steel in the export product.

C843 Steel Clamp (Ungalvanised)

2 Non-Alloy Steel /Stainless Steel Round/billet

1.10 Kg/Kg content of relevant steel in the export product.

1 Kg 1 Carbon Steel Tubes/Pipes 1.05 kg/kg content of Steel Tube / Pipes in the export product

2 ABS Granules / Resin 1.05 kg/kg content of ABS in the export product

C844 Steel/ Cops/ Pirn/ Bobbin

3 CRCA Steel Sheet/Strips. 1.15Kg/Kg contentof Steel Sheet in the export product.

C845 Steel Fire Resisting Filing cabinets fitted with combination locks (consisting of locks, Dail

360 Nos 1 Combination Locks (consisting of Locks, Dail and Dial Rings)

net to net

C161

and Dial Rings)

1 kg 1 Low carbon H.R. Defective sheets/ coils

1.0168 kg C846 Steel flexible Tubes/ Pipes in sizes ranging from 1/2" to 3" (Galvanised) 2 Zinc 0.04 kg

1 MT 1 CR Steel strips/ coils seconds/ defectives

776 kg

2 MS Wire/Wire rods 175 kg

3 Spring Steel 87.5 kg

4 Nickel (for Nickel plated item) OR

7.757 kg

C847 Steel folding Bed Nickel plated/ Painted

4 Epoxy/ Polyester Paints (For painted items)

7.98 kg

1 MT 1 HR Coils/Sheets 1.05 MT/MT content in export.

C848 Steel Gate Corner - Galvanised

2 Zinc 4% of Net weight of steel galvanised.

C849 Steel Hinges - Bar Type 1 kg 1 MS/Non-Alloy Steel Rounds/ Bars/Wire Rods

1.24 kgs

1 MT 1 Non-Alloy Steel Rounds 1.05 MT/MT content in export.

C850 Steel J. Belt - Galvanised


1 No. 1 MS Sheet 1.267 kg/Kg content in the export product.

2 MS Wire rod 1.10 kg/Kg content in the export product.

3 MS Round 1.750 kg/Kg content in the export product.

C851 Steel pegs

4 Zinc for plating 1% of the net export weight to be plated

C852 Steel Safes fitted with combination locks (consisting of Locks, Dail and Dial Ring)

150 Nos 1 Combination locks (consisting Locks, Dail and Dial Rings)

net to net

C853 Steel Screw 1 kg 1 MS Wire Rod OR M.S.Wire

1.12 kg OR 1.08Kg.

1 MT 1 HR Coils/Sheets 1.05 MT/MT content in export.

C854 Steel Truss Tightner - Galvanised


1 kg 1 M.S. Wire 1.02 kg/kg content in the export product.

C855 Steel Weld Mesh

2 Zinc 4% of weight of Steel to be galvanised.

1 kg 1 a) MS Wire Rod OR

1.05 kg. C856 Steel Stranded wire

1 b) Steel Wire of Relevant Grade and dia

1.02 kg.

C857 Surgical Blades made of High Carbon Steel (Carbon 0.6% and above by wieght)

1 MT 1 Cold Rolled High Carbon Steel strips unhardened and untempered (carbon 0.6% and above by weight)

2.4 MT

C858 Surgical Blades made of 1 MT 1 Cold Rolled Bright Finish Surgical Stainless Steel Strips or

2.75 MT

C162

Stainless Steel relevant grade

1 Kg 1 Stainless steel wire (Surgical Needle wire) AIS-420 series


C859 Suture Needles

2 HSS Twist Drills (Micro Pivot Drills)

5 Nos./kg of Suture Needles

100 Nos. 1 ABS Moulding Powder/Granules 1.05 kg/kg content in the export product

2 Polyacetal Moulding Powder/Granules


3 SAN Moulding Powder/Granules 1.05 kg/kg content in the export product

4 Polycarbonate Granules 1.05 kg/kg content in the export product

C860 Table Pencil Sharpener

5 Relevant Gear Shape Cutter Net to Net

1 kg 1 MS/HR Sheet/Coil/Strip 1.25 kg/kg content in export

2 M S Wire Rod 1.05 kg/kg content in export

3 Zinc OR

0.01 kg/kg weight of Hinges to be Plated

C861 TEE Hinges (Painted/Zinc Plated)

Paint 0.15 kg/kg weight of Hinges to be Painted


0.993 kg C862 Tension Band

2 Zinc 0.075 kg

C863 Tiller Left Hand or Right Hand

1 kg 1 MS Plate 1.11 kg

10 Lakh Nos.

1 Brass Scrap 1.075 Kg/Kg content in export

C864 Tips for Ball Pen Refills of relevant materials of Balls. 2 Stainless Steel Balls/Ceramic

Balls/ Tungsten Carbide Balls 1020000 Nos

C865 Deleted

1 No. 1 CRCA Sheets Second/Prime Grade

1.10 kg/kg net content in export product

2 Low Carbon Wire Rod 1.05 kg/kg net content in export product.

C866 Tower Bolts

3 Protective Paint or Zinc for coating

2% of the weight of export product

1 No. Components/Parts related to the export product :

1 Electric Supply 160 A 1 No

2 Electric Panel (control Panel) 1 No

3 Complete Cab 1 No

4 Complete Slewing mechanism 1 No

5 4T Safety Device 1 No

6 Complete Hoist Winch 1 No

7 Trolley Winch 1 No

8 Complete Travelling 1 No

C867 Tower Crane Type E1/13B

9 Electrical Extension (Either 15M, 30 M, or 50 M)

1 No

C163

10 Hydraulic Unit with seperate Hyd. Oil 60 Ltrs

1 No

11 Hydraulic Jack (Cylinder) 1 No

12 Cable Winder 1 No

13 Wire Rope 7.5 mm 150 Mtrs

14 Wire Rope 10 mm 250 Mtrs

15 Fish Plates 4 Nos

16 Fish Plates Bolts Net to Net

1 No. Components/Parts related to the export product :

1 Electric Supply 160 A 1 No

2 Complete Hoist winch 1 No

3 Trolley Winch 1 No

4 Complete Cab 1 No

5 10T Safety Device 1 No

6 Electric Cable Set 1 No

7 Complete Slewing Mechanism 1 No

8 Complete Travelling 1 No

9 Hydraulic Unit with separate Hyd. Oil 60 Ltrs

1 No

10 Hydraulic Jack (Cylinder) 1 No

11 Cable Winder 1 No

12 Electric Extension (either 15 M, 30M or 50M)

1 No

13 fish Plates 200 Nos

14 Wire Rope 7.5 mm 150 Mtrs

C868 Tower Crane Type F25/26C similar to FO/23B

15 Wire rope 14 mm. 745 Mtrs.


0.695 kg


C869 Track Wheel

3 Zinc 0.040 kg

1 No. 1 Spacer Net to Net

2 Springs Net to Net

3 Stem Net to Net

4 Retaining Ring Net to Net

5 Nut Net to Net

6 Copper Tube Net to Net

7 Tube Net to Net

8 Screw Net to Net

9 Clip Net to Net

10 Push Button Net to Net

11 Bellows Net to Net

12 Diaphragm Net to Net

13 Wire Net to Net

C870 Transducer

14 Stud Net to Net

C164

15 SS Hex Bars 0.07 Feet

16 Rod 0.46 Feet

17 Coil 0.026 Feet

18 CRCS Strip 0.084 Lbs.

19 SS Strip 0.093 Lbs.

20 SS Sheet 0.0146 Lbs.

1 MT 1 ERW MS/Carbon Steel Pipes/Tubes OR


1 MS/Carbon Steel HR Steels/ Coils/ Prime/ Seconds/ Defectives


2 MS/ Carbon Steel/ ENTA Round/ Rods and Bars


C871 Tubular Poles/ Accessories i.e. Cross Arms, Tussing Tackle, Stay Set, Flag Arm, Anchor Bolt, Holder, Arrestors

3 Welding Rods Upto 2% of FOB Value


1.050 kg C872 Turn Buckle

2 Zinc 0.040 kg

1 Nos 1 Cold Rolled Stainless Steel Strips 1.75 kgs/kg content in export product

2 ABS/Styrene Butadiene Co-Polymer Q-Resin (for handle, seat, top cap and spacer 1 & 2)

1.10 kgs/kg content in export product

3 High impact/ GP Polystyrene (for Protective Cap/Magazine)

1.10 kgs/kg content in export product

4 Polyox Coagulant

5 Polyox of relevant grade

6 GP Polystrene

7 Polyterafluoroethylene

8 Grinding Wheel

9 Slitting Wheel

10 Krytox / Dry Film

11 Aluminium Strips/Coil/Sheet (for spacer/clamps)

1.06 kg/kg content of the export product

12 T.P Elastomer for Sleeve 1.10 kg/kg content of the export product

13 High impact Polystyrene (for Top Cap seat & handle)


14 Brass Strips/ Zinc Mazak (for razor head and razor handle rib)


C873 Single/Twin type shaving system Disposable Razor Blades (single/double/triple blades)with/without Lubra exported either with fixed handle or handle and magazine separately in different types of packings

15 Packing material As per packing policy

Note: 1. Wherever handles are sought for import separately, the same be allowed as components on net to net basis with accountability clause and in such cases the rest of the raw materials will have to be accounted for as per the norms above. 2. Import item No. 4,5, and 6 all the three items together 1.30 kg/kg weight of the Lubra strips in the export product. 3. Import item No. 7,8,9, and 10 (Consumables)&. CIF value taken together may be restricted to 1% of the FOB value.

C874 Deleted

C875 Deleted

C165

C876 Deleted

C877 Deleted

C878 Deleted

C879 Deleted

1 Million pcs.of Razor handles

1 High Impact Polystyrene (for Razor Handle)

8834 kg

2 Zinc Mazak/ Brass Strips (for Razor rib)

17080 kg

C880 Twin type shaving system Razor/ Razor Handle

3 Brass Strip (for Razor Head) 2400 kg

C881 Type Inner/ Outer Ring Spiral Wound Gaskets

1.0 MT 1 Stainless Steel Strips 1.10 MT/MT content in export

1 kg. 1 MS Round 1.094 kg

2 Zinc 0.035 kg

C882 U-Bolt

3 Nuts Net to net.

1 kg. 1 MS Round 1.094 kg C883 U-Clamp/C-Clamp.

2 Zinc 0.035 kg


0.870 kg


C884 Universal Bracket

3 Zinc 0.050 kg

1 No. (1000 ml)


2 Stainless Steel Sheets/Coils 1.05 kg/kg content in export product

3 Chemicals for Glass Shell:

a) Borax 80 gms.

b) Selenium 2 gms.

c) Arsenic 2 gms.

d) Soda Ash 100 gms

e) Sodium Silico Fluoride 25 gms.

f) Silver Nitrate 1.5 gm

g) Caustic Soda 25 gms.

C885 Vaccum Flasks of Stainless Steel Casing

h) Silicon Oil 0.5 gm.

C886 Valve for LPG Cylinder, Hand wheel type, made of Brass

1 kg 1 Brass Scrap 1.12 kg


1.219 kg C887 Vertical Arm

2 Zinc 0.085 kg

C888 Stainless Steel Washers of different grades.

1 kg 1 Stainless Steel Coils/Sheet/Sheet Cuttings/Strips - both prime and seconds of relevant grade.

1.65Kgs.

C889 Deleted

1000 Nos 1 Nickel Silver Brass Strip OR


C890 Watch Dials made out of Nickel Silver Brass Strip

1 a) i ) Semi-finished Watch Dials (Pre-punched blanks made out of

Net to Net

C166

Brass / Nickle Silver with special base finish-Gents, Boys and Ladies OR

1 a) ii ) Semi-finished Watch Dials (Pre-punched blanks made out of Brass / Nickle Silver with mother of pearl- (MOP Discs)Gents, Boys and Ladies OR

Net to Net

1 a) iii ) Semi-finished Watch Dials (Brass/Nickle Silver Strips) containing semi - punched brass circles Gents, Boys and Ladies

Net to Net

2 Dial Feet 2280 Nos.

3 Appliques OR

12210 Nos.

3 (a)(i)Special Appliques (pre-punched mother of pearl - (MOP Discs) - made out of natural sea-shell - Gents, Boys and Ladies OR

Net to net.

3 (a)(ii)Special effects sheets made out of carbon fibre

1.3 Sq.mtr./ Sq.mtr. content in export product.

4 Lacquers 600 gms.

5 Printing Ink 67 gms.

6 Misc. Items: Grinding wheel/Abrasive/Polipla Abrasive/Electroplating Salt & Surface Treatment Chemicals/Nickel Sulphite/Silver Brightener/Ad Salt/Twist Drills & Cutting Tools & Cleaning Brushes.


C891 Water meters 1 kg 1 Brass Scrap 1.075 kg

C892 Wear Sleeves made out of Bright Mild Sheet.

1 MT 1 EDDG Bright Mild Steel 1.30 MT

C893 Welded Steel Pipe Fittings made from Steel Plates/Sheets

1 MT 1 Relevant Alloy/Non-Alloy Steel Plates/Sheets

1.30 MT

C894 Deleted

C895 Window Stay (made of Steel Sheet)

1 MT 1 H.R.Non Alloy Steel Sheet/Coils/Strips.

1.05 MT

C896 Steel Wire Nails 1 kg 1 M.S. Wire 1.05 kg

C897 Wood screws made of steel, self colour or plated

1 kg 1 Carbon steel wire rod 1.400 kg


1.060 kg C898 Wood to steel Adapter

2 Zinc 0.065 kg


1.219 kg C899 Y-Arm made of Steel.

2 Zinc 0.085 kg

C900 Zinc Plated (Galvanised) Beam Clam 3/8" to 1/4"

1 MT Connectors

1 H.R. Coil/Sheet 2 mm to 3.15 mm

1.35 MT

C167

without Screw.

2 Zinc 0.008 MT

C901 Zinc plated (Galvanised) conduit Hanger

1 kg 1 HR Coil/ Sheet 1 MM to 2 MM thick

1.067 kg

1No. 1 ERW Steel Tube OD 21.31 mm to 121.2 mm OR HR Steel (Non- alloy) Coil/ Sheet 1.6 mm to 5 mm

1.26 MT/MT content in the export product. OR 1.49 MT/MT/Kg content in the export product.

2 Zinc 0.8% of the weight of the export product.

C902 Zinc Plated (Galvanised) Metallic Connectors (Regular "C" Type & Insu- lated) Size 1/4" to 4"

3 Machine Screws OR Bolt

Net to Net Net to Net

1 MT Connectors without Screw

1 C.R. Coil/Sheet 1 mm to 2 mm 1.75 MT C903 Zinc Plated (Galvanised) Romex Connectors 1/2" to 1-1/2"

2 Zinc 0.008 MT

1 MT 1 For export item ( A) (I) H.R. Coil/Sheet 2 mm to 5 mm (II) Zinc (III) Alloy Steel Bars of AISI D-3 OR AISI M-2 & equivalent Dia upto 350mm.

3.430 MT 0.008MT CIF value resctricted to 2% of the FOB value of the export .,

2 For export item ( B) (I) MS Plate 10mmto 16mm (II) Zinc (III) Alloy Steel Bars of AISI D-3 or AISI M-2 & equivalent Dia upto 350mm.


C904 Zinc Plated (Galvanised Steel Locknuts (Blanked/ Punched) Size: a)1/2" to 4" Regular 1/2" to 2" UL/CSA b)5" and 6" Regular and 2-1/2" to 6" UL/CSA c)1/2" to 1" Extruded type

3 For Export item ( C) (I) CR Coil/sheet 1mm to 2mm (II) Zinc (III) Alloy Steel Bars of AISI D-3 OR AISI M-2 & equivalent Dia upto 350mm.


100 Nos. 1 Abrasive Grade Vulcanised Fibre 1.3135 kg (quantity to be accounted for in the export product)

C905 Aluminium Oxide Resin Disc (Coated Abrasive): 4" Dia x 5/8" Centre Hole (containing Al. Oxide grains Min. 1.1 kg)

2 Aluminium Oxide grains (Synthetics)

1.21 kg

100 Nos. 1 Abrasive Grade Vulcanised Fibre 1.854 kg. (quantity to be accounted for in the export product)

C906 Aluminium Oxide Resin Disc (Coated Abrasive) 5" Dia x 5/8" Centre Hole (containing Al. Oxide grains Min. 1.4 kg.)


1.54 kg

100 Nos. 1 Abrasive Grade Vulcanised Fibre 3.0906 kg (quantity to be accounted for in the export product)

C907 Oxide Resin Disc (Coated Abrasive Aluminium) 6" Dia x 7/8" Centre Hole (containing Al. Oxide grains Min. 2.74 kg.)


3.017 kg

C168

100 Nos. 1 Abrasive Grade Vulcanised Fibre 3.5850 kg. (quantity to be accounted for in the export product)

C908 Oxide Resin Disc (Coated Abrasive Aluminium) 7" Dia x 7/8" Centre Hole (containing Al. Oxide grains Min. 3.2 kg)


3.52 kg

1000 Nos 1 Ball bearing grade steel tubes/Bars/Un-machined Forged Rings of SAE 52100/ DIN 100 Cr M07 or equivalent grade

2300 kgs

2 Steel balls of SAE 52100 or equivalent grade

20200 Nos

3 Brass Scrap 194 kgs

C909 Ball/ Roller Thrust/ clutch release/ spherical plain Bearing having height more than 1" but not exceeding 2"

4 Misc. Items: Super precision fibre cage bearing, grinding spindle and grinding wheel

upto 5% of FOB Value

1000 Nos 1 Ball bearing grade steel tubes/Bars/Un-machined forged Rings of SAE 52100/ DIN 100 Cr M07 or equivalent grade

3340 kg

2 Steel balls of SAE 52100 or equivalent

17574 Nos

3 Brass Scrap 2000 Kg

C910 Ball/ Roller Thrust/ clutch release/ spherical plain Bearing having height more than 2" but not exceeding 5"

4 Misc. Items: Super precision fibre cage bearing, grinding spindle and grinding wheel

upto 5% of FOB value

1000 Nos 1 Ball bearing grade steel tubes/Bars/Un-machined Forged Rings of SAE 52100/ DIN 100 Cr M07 or equivalent grade

230 kgs

2 Steel Balls of SAE 52100 or equivalent grade

15150 Nos

C911 Ball/Roller Thrust/ clutch release/ spherical plain Bearing having height 0-1"

3 Super precision fibre Cage bearing, grinding spindle and grinding wheels

upto 5% of FOB Value

1 kg pig iron content

1 Pig Iron 1.10 kg C912 Bench Grinder 6"

2 MS Round 1.17 kg

100 Nos 1 Tungstons Carbide Tips/Inserts 102 Nos. C913 Brazed Carbide Tools

2 Brazing Foil 0.0314 Kg

1000 No 1 Tungsten Carbide Tips & inserts in various shapes & sizes

net to net

2 Carbon steel bars/ Rounds/Squares/ Flats

1.1 kg/kg of wt of steel in export

C914 Brazed Tools Carbide Tips

3 Brazing Foil 0.29 kg

C915 Cold Rolled Non Alloy/Alloy Steel Hardened and Tempered Saw Blades/Handsaw Blades

1 MT 1 Hot Rolled Alloy/Non Alloy Steel Strips/Wide Coils of relevant grade

1.20 MT

1 No 1 Cylinders 1 No.

2 VC Washer 1 No.

C916 Pneumatic tool

3 Latch Bushing 1 No.

C917 Cutting Tools - Single point of High Speed Steel

1 kg 1 High Speed Steel (Cobalt Grade) 1.05 kg

C169

(Cobalt Grade)

C918 Cutting tools - Single point of High Speed Steel (Non-cobalt Grade)

1 kg 1 Non-cobalt bearing high speed steel (AISI M2 grade of High Speed Steel)

1.05 kg

C919 Deleted

1 kg 1 High speed steel/ (non-cobalt grade)/ Tool Steel

1.33 kg C920 Cutting Tools - Multiple point of high Speed Steel (Non-cobalt Grade)/Tool Steel

2 Milling Cutter for a cif value upto 2% of the fob value of the export product.

1 kg 1 High Speed Steel (Non -Cobalt Grade)/Tool Steel

1.33 kg C921 Cutting Tools - multiple point of High Speed steel (Cobalt Grade)/Tool Steel 2 Milling Cutter for a cif value upto

2% of the fob value of the export product.

1 MT 1 Copper Wire Bar/ Cathode 1.10 MT/MT content in the export product.

2 High Grade Zinc Ingot 1.10 MT/MT content in the export product.

3 ABS - Styrene Group Upto 2% of the FOB value of export.

C922 Electric Discharge Machine(EDM) Wire

4 Expanded Polyesterin Upto 2% of the FOB value of export.

100 Sq. mtr. (106.5 kgs +/- 2%)

1 Drill Cloth made of Cotton 111 Sq.mtr.

2 Aloxide Grain OR Silicarb Grain OR Zirkon Grain

35.66 kgs 25.44 kgs 35.66 kgs

3 Phenol 17.40 kgs

4 Formaldehyde(37%) 15.82 kgs

C923 Endless Coated Abrasive Belts/ Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 100-220

5 Belt Jointing material consisting of PU Resin, Hardener, Splicing Tape


This norm shall also be applicable to exports made in "Cloth Roll" form.

100 Sq. mtr. (245 kgs +/- 2%)



134.89 kgs 112.25 kgs 134.89 kgs

3 Phenol 44.69 kgs


C924 Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 24-30




C925 Endless Coated Aloxide Cloth Belts/Silicarb Cloth

100 Sq. mtr. (230 kgs +/- 2%)


C170


119.56 kgs 96.73 kgs 119.56 kgs

3 Phenol 43.32 kgs


Belt/ Zirkon Cloth Belt Grit Ranges 36-40




100 Sq. mtr. (152 kgs +/- 2%)



64.38 kgs 53.74 kgs 64.38 kgs

3 Phenol 27.50 kgs


C926 Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 50-80




100 Sq. mtr (89 kgs +/- 2%)



21.75 kgs 20.96 kgs 21.75 kgs

3 Phenol 12.87 kgs


C927 Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 240 and above



C928 Fix Perfect Inserts for Milling and Turning

1 kg 1 Tungsten Carbide Powder 1.20 kg/kg of Tungsten Carbide Powder content in export product

C929 Gear cutting tools of cobalt bearing high speed steel

1 kg 1 High speed steel having cobalt content less than 10%

1.80 kg

C930 High speed steel square, Rectangular and Round Cobalt & Non-Cobalt Grade Tool Bits of Cross Sectional Area more than 150 Sq.mm.

1 MT 1 High Speed Steel Cobalt Bearings & non-Cobalt Bearings Square, Rectangular & Round Bars

1.15 MT

C931 Industrial Diamond Prod. Diamond Grinding Wheels/ diamond file and

1 Industrial Diamond Powder Net to net( upto the maximum of 20% of fob value)

C171

tools

C932 Industrial Diamond Prod. Diamond Tools/ Diamond dressers/ Diamond tools bits

1.00 ct. 1 Industrial Diamond 1.100 ct

1 Kg 1 Synthetic Industrial diamond powder or Borazone CBN Abrasive.

2 Resin bonding mixture

C933 Industrial Diamond/CBN Grinding Wheels

3 Matrix powder

Note : 1.DIAMOND IMPREGNATED SEGMENTS: %age of raw material requirement on net weight of product Resultant. 2. Import item Nos. 1,2 and 3&... CIF value of three items taken together restricted to 35% of FOB value.

C934 ISO Indexable Inserts For Turning, Milling and Drilling

1 kg 1 Tungsten Carbide Powder/ Tungsten Carbide Mixed Powder

1.15 kg/kg of Tungsten Carbide Powder content in the export product.

1 No. 1 Ball Screw Support Bearings Net to Net

2 Stepper Servo DC Motors/DC Motors

Net to Net

4 Limit Switch Net to Net

5 Electro Magnetic Clutch Net to Net

6 High Pressure Pump Net to Net

7 LM Guides Net to Net

8 Ball Screws Net to Net

9 Crossed Roller Guides Net to Net

10 Mosfets Net to Net

11 LED Displays Net to Net

12 Integrated Circuits Net to Net

C935 NC/CNC Wire Cut Electric Discharge Machine

13 Potentiometers Net to Net

C936 Organic Grinding Wheels: All other wheels Grain Bond Ratio 75:25

1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide,Resin


1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide, Resin


C937 Organic Grinding Wheels: Depressed Centre Wheels Grain Bond Ratio 75:25

2 Glass Fibre Disc 3.15 Nos./depressed centre wheel export

C938 Organic Grinding Wheels: Hot Press Wheels for Billet Grinding Grain Bond Ratio 75:25

1 kg 1 Synthetic Aluminium Oxide/Resin, Iron Pyrite, Chopped Glass Strands


C939 Organic Grinding Wheels: Non-Reinforced Cutting off wheels Grain Bond Ratio 75:25



C940 Organic Grinding Wheels: Nut Inserted wheels Grain Bond Ratio 88:12



C172

C941 Organic Grinding Wheels: Point & Fluting Grain Bond Ratio 65:35

1 kg 1 Synthetic Aluminium Oxide/Iron Pyrites


C942 Organic Grinding Wheels: Razor Blade Grinding wheel Grain Bond Ratio 85:15

1 kg 1 Silicon Carbide, Resin 1.15 kg/kg content in export



C943 Organic Grinding Wheels: Reinforced Cutting off wheel Grain Bond Ratio 75:25

2 Glass Fibre Disc 2.10 Nos./re-inforced cutting of wheel export

C944 Organic Grinding Wheels: Snagging wheels Grain Bond Ratio 75:25



1000 Nos. 1 Solid Tungsten Carbide Blanks 1000 Nos. C945 PCB Drills made from Solid Tungsten Carbide Blanks/ Rods of Diameter 1.51 mm to 6.50 mm

2 Relevant Consumables: (Fluit Grinding Diamond Wheels)


1 No. 1 Solid Tungsten Carbide Blanks Dia 3.25+/-0.25x length 38.3+/- 0.5mm

1.10 Nos. C946 PCB Router made from Solid Tung- sten Carbide Blanks

2 Diamond Grinding Wheels Dia 150mm (Consumables)

1 No. per 1350 Nos. of the export product.

C947 Permanent Magnetic Chuck

1 No. 1 Permanent Magnet Strontium Ferrite Grade


C948 Plastic Injection/Extrusion Mould/Dies/Cavities/Punches/Housing/Inserts made of Alloy Steel/Tool Steel

1 kg 1 Relevant Alloy Steel/Tool Bars/Rods/Flats/Rounds/Plates

1.25 kg

C949 Pneumatic Revetting hammer

1 No 1 Cylinders of reqd specification 1 No.

C950 Resin bonded diamond wheels (Quantity of diamond powder contained in export Product should be mentioned)

1 kg 1 Industrial Diamond Powder Net to Net

1 kg 1 High speed steel and Bimetal strips/sheets

1.20 kg C951 Saws/ Segments made from high speed steel strips/ sheets including Bimetal & Flexible

2 MISC. ITEMS:- Millingcutters, Settingwheels/Setting Hammers, Paints, Powder for Powder Coating, Dies & Punches, Cleaning Oil Berkatekt (Chemical), Tools & Dies.

CIF Value restricted to 2% of FOB value.

1 kg 1 Non-Alloy Steel rounds 1.10 kg/Kg content in the export product.

C952 Screw Drivers (Nickel plated)

2 Nickel 0.0097 kg/ kg of steel in export product

C953 Slitting cutters made of steel variety-x

1 kg 1 Steel of variety-x 2.15 kg

C173

C954 Vetrified Grinding wheels : Mounted Points Grin Bond Ratio 85:15

1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide


C955 Vetrified Grinding Wheels: All other Vetrified Grinding Wheels Grain Bond Ratio 85:15



1 kg 1 Silicon Carbide Grain 0.448 kg C956 Vetrified Grinding Wheels: Ball Wheels Grain Bond Ratio 60:40

2 Synthetic Aluminium Oxide Grain

0.242 kg

C957 Vetrified Grinding Wheels: Floor Polishing Blocks, Rubbing Bricks, Finishing Stone, Segments Grain Bond Ratio 85:15



C958 Vetrified Grinding Wheels: Honing Stone/Super Finishing Stones Grain Bond Ratio 85:15



1 kg 1 High speed steel (non-cobalt grade) OR

1.25 kg C959 Welded Construction tools made of High speed steel in combination with other steels namely Twist drills/ Reamers/ Threading tools/ End mills/ Milling cutters/ Taps

1 High speed steel (Cobalt grade) 1.25 kg

1 No. 1 Cold Rolled Steel Sheets/Strips/Coils in Thickness Between 0.5 mm to 3.0mm

42.50 kg

2 Cold Rolled Coated Steel Sheets/Strips/Coils in Thickness Between 0.8 mm to 1.0 mm

5.03 kg

3 Hot Rolled Steel Sheets/Strips/Coils in Thickness Between 3.0 mm to 5.0 mm

5.891 kg

4 Commercial Grade Aluminium Purity min 99%

11.762 kg

5 Silicon 1.529 kg

6 Copper Cathode/Wire Bars/Rods 0.263 kg


8 Nickel 0.314 Kg

9 Polyol 480.00 gms

10 Isocynate 336.00 gms

11 Butyl Rubber 453.00 gms

12 Relevant Synthetic Rubber (NBR/SBR)

145.75 gms

13 Carbon Black 516.78 gms

C960 Above 95 CC and upto 175 CC 4 Stroke Motorcycle in CKD/SKD/CBU Condition.

14 Polyvinyl Chloride (PVC) 801.15 gms

C174

Granules

15 Polypropylene Granules 583.80 gms

16 High Density Polyethelene Granules

180.60 gms

17 Rexine 0.67 Sq.Mtr.

18 Paints 3.40 Ltrs.

19 Air Filter Net to net.

20 Auto Light Set Net to net.

21 Battery Net to net.

22 Bearing Race Set Net to net.

23 Bearing Set Net to net.

24 Boss Net to net.

25 Brake Cam Set Net to net.

26 Bushing Set Net to net.

27 Camshaft Valve Net to net.

28 Carbuiretor Assembly Net to net.

29 Catalytic Converter Net to net.

30 Chain and Sprocke Set Net to net.

31 Change Drum Assembly Net to net.

32 Charging Regulator Assembly Net to net.

33 Clutch Asly Components Net to net.

34 Control Cable Set Net to net.

35 Conyto Lever and Housing Set Net to net.

36 Crankshaft Assembly Net to net.

37 Cylinder Liner Net to net.

38 Decal Set Net to net.

39 Disc Brake Component Net to net.

40 Filter Net to net.

41 Fork Shift Set Net to net.

42 Front Fork Net to net.

43 Front Hub Axle Net to net.

44 Fuel Tap Assmbly Net to net.

45 Gear Balancer Wt. Net to net.

46 Gear Set Net to net.

47 Guide Chain/Stopper Net to net.

48 Guide Valve Net to net.

49 Hardwares Net to net.

50 Harness Net to net.

51 Horn Net to net.

52 Housing Assembly Control Net to net.

53 Ignition Coil Net to net.

54 Ignitor Net to net.

55 Kick Lever Assembly Net to net.

C175

56 Kick Shaft Assembly Net to net.

57 Lock/Key Set Net to net.

58 Magneto Net to net.

59 Needle Roller Bearing Set Net to net.

60 Nipple Spoke (1 Set =72 Nos.) Net to net.

61 Oil Pump Assembly Net to net.

62 Oil Seal Net to net.

63 Piston Asly (Piston, Rings, Pin) Net to net.

64 Push Rod Net to net.

65 Rear Hub Axle Net to net.

66 Rear Shock Absorber (1 Set = 2 Nos.)

Net to net.

67 Rear View Mirror Set (1 Set of 2 Nos.)

Net to net.

68 Regulator Voltage Assembly Net to net.

69 Relay Net to net.

70 Retainer Net to net.

71 Retainer Valve Spring Net to net.

72 Rocker Arm Net to Net

73 Scr, Diodes and other Electronics Components

Net to Net

74 Screw Net to net.

75 Shaft Transmission Input Net to net.

76 Shaft Transmission Output Net to net.

77 Shift Rod Net to net.

78 Spark Plug Net to net.

79 Speedometer Assembly Net to net.

80 Spoke (1 Set = 36 Nos.) Net to net.

81 Spring Engine Valve Net to net.

82 Starter Clutch Components Net to net.

83 Starter Motor Net to net.

84 Steel Frame Net to net.

85 Suppressor Cap Net to net.

86 Tank Cap Assembly Net to net.

87 Tyres Set Net to net.

88 Valve Intake & Exhaust Net to net.

89 Valve Seat (1 Set = 2 Nos.) Net to net.

90 Hot Dies Steel Blocks, High Speed Steel, Inserts, Cutting Tools, Grinding Stones, Adhesives and Sealants, Steel shots


Note : The item of import and its specification should conform/match with the export product.

1 No. 1 CRCA Defective Sheets/Coils/Strips

33.42 kgs C961 Above 175 CC and upto 250 CC Motorcycles in

2 M.S./Carbon Steel Seamless Pipe 20.40 kgs

C176

3 Natural/Synthetic Rubber(SBR/PBR)including SBR & V.P. Latex

53 kgs/100 kgs weight of Tyres & Tubes separately.

4 Paints(Acrylic) 2 litres

5 PU Foam 2.80 kgs

6 Needle Bearing (dia 4 x 6 mm) 40 Nos

7 Bearing (6304) 3 Nos

8 Bearing (6205) 2 Nos.

9 Bearing (6303) 1 No.

10 Bearing (6302) 4 Nos.

11 Capacitor Discharge Ignition (CDI Unit)

1 No.

12 Generator Assembly 1 No.

13 Spart Plug 1 No.

14 Piston, Piston Ring & Pin 1 No.

15 Flasher 1 No.

16 Tail Light 1 No.

17 Speedometer 1 No.

18 Headlight 1 No.

19 H.T. Coil 1 No.

20 Cables 20 Meters

21 Reflector 2 Nos.

22 Indicator 4 Nos.

23 Filter 1 No.

24 Lock 2 No.

25 Automobile Bulb 9 Nos.

26 Forged Components one No. each offollowing:-

i) Engine Sprocket

ii) Fly Wheel

iii) Connecting Rod

iv) Main Shaft

v) Lay Shaft

vi) Gear with Hub

vii) Kick Start Shaft

viii) Kick Start Quadrant

ix) Kick Start Lever with Pin

x) Kick Start Ratchet

xi) Head Lug

xii) Steering Lug

xiii) Clutch Hub

xiv) Bracket

27 Cast Components: one No. each of following:-

CBU/ SKD/ CKD condition

i) Cylinder Barrel

C177

ii) C.C. Wheel

28 Electric Horn 1 No.

C962 Deleted

1 No. 1 CRCA Defective Sheets/ Coils/Strips

42.32 kgs.

2 MS/Carbon Steel Seamless Pipe 25.30 kgs.

3 Natural Rubber/Synthetic Rubber (PBR/SBR - 1502/1712) including SBR latex and VP latex

53 Kg per 100 Kg weight of tyres and tubes separately

4 Paints 2.00 Ltr.

5 PU Foam 2.80 kgs.

6 Needle Bearing (Dia 4X6) 40.00 Nos.

7 Bearing (6305) 3.00 No.

8 Bearing (6205) 2.00 No.

9 Bearing (6303) 1.00 No.

10 Bearing (6302) 4.00 No.

11 Capacitor Discharge Ignition (CDI Unit)

1.00 No.

12 Generator Assembly 1.00 No.

13 Spark Plug 1.00 No.

14 Piston, Piston Rings & Pin 1.00 Set.

15 Flasher 1.00 No.

16 Tail Light 1.00 No.

17 Speedometer 1.00 No.

18 Headlight 1.00 No.

19 H.T. Coil 1.00 No.

20 Cables 20.00 Mtrs.

21 Reflector 2.00 No.

22 Indicator 4.00 No.

23 Filter 1.00 No.

24 Lock 2.00 No.

25 Automobile Bulb 9.00 No.

26 Forged Components 22.00 Nos.

27 Cast Components 16.00 kgs.

C963 Above 250 CC and upto 500 CC Motorcycles in CBU/ SKD/ CKD condition

28 Electric Horn 1.00 No.

Note : 1. Import of synthetic rubber shall not exceed 9 Kg out of total quantity of 53 Kg allowed. Out of 9 Kg of synthetic rubber allowed, the import of VP Latex shall not exceed 0.4 Kg.

1 No. 1 Raw Material:

a) Alloy Steel Sheet/Strips/Bars 14.00 kgs.

b) CRCA Sheet/Coil Strips 35.08 kgs.

c) HR Coils/Strips 17.28 kgs.

d) Barss Scrap 1.30 kgs.

e) Aluminium/Alloy Ingots 5.60 kgs.

C964 49 CC Moped

f) MS Rods/Bars 4.50 kgs.

C178

2 Chemicals:

a) Paints 1.00 kg.

b) Isocyanate 0.35 kg.

c) Polyol 0.35 kg.

d) PVC Leather Cloth 0.40 kg.

e) Nylon Granules 1.00 kg.

f) HDPE Granules 1.00 kg.

g) PVC Resin (Paste Grade) 0.5 kg.

h) Nickle 1.00 kg.

3 Components:

a) Small End Bearing Net to Net

b) Clutch Pulley Bearing Net to Net

c) Big End Bearing Net to Net

d) Spark Plug Net to Net

e) High Tensile Nut/Bolt/Screws/Rivets

Net to Net

f) Piston, Piston Ring and Pin Net to Net

g) Tail Light Net to Net

h) Flasher/Indicator Net to Net

i) Head Light Net to Net

j) Reflector Net to Net

k) Halogen Bulb Net to Net

l) Tyres Net to Net

m) Tubes Net to Net

1 No. 1 Cold Rolled Prime Steel Sheets/Strips/Coils

34.221 kgs

2 Hot Rolled Prime Steel Sheets/Strips/Coils

2.311 kgs

3 Seamless Steel Tubes 0.073 Mtr.

4 Aluminium not Alloyed/Aluminium Alloys

5.573 kgs

5 Silicon 0.773 kg

6 Copper Cathode/Wire Bar/Rod 0.133 kg

7 Super Enamelled/Enamelled Copper Wire

0.163 kg


9 Polyol 265.000 gms



12 Synthetic Rubber (NBR/SBR/ PBR)

36.36 gms


14 Poly Vinyl Chloride (PVC) Granules

1110.110 gms

15 PolyPropylene Granules 1372.000 gms

C965 45 CC to 60 CC Scooter in CKD/SKD/CBU Condition

16 High Density Polyethelene 585.900 gms

C179

Granules

17 ABS Granules 2513.700 gms

18 Nylon Granules 99.750 gms

19 PVC/Artificial Leather Cloth 0.679 Sq.Mtr.


21 Regulator Assembly Net to net.

22 Crank Shaft Assembly(without Bearings)

Net to net.

23 Tyres(1 Set= 3 Nos.) Net to net.

24 Tool Kit Net to net.

25 Output Shaft Assembly Net to net.

26 Carburettor Net to net.

27 Piston Assembly Net to net.

28 Clutch Assembly Complete Net to net.

29 Driving Sprocket Net to net.

30 Chain Net to net.

31 Pinion Shaft Assembly Net to net.

32 Bearing (SKF 6203) or equivalent

Net to net.

33 Bearing (SKF6203.C3) or equivalent

Net to net.


Net to net.

35 Needle Roller Bearing (KZK162212) or

Net to net.

36 Needle Roller Bearing (KBK121516) or equivalent

Net to net.

37 Helical Gear Net to net.

38 Kick Starter Net to net.

39 Central Bush-brake Drum Net to net.

40 Horn Net to net.

41 Front Hub Pin Net to net.

42 Supressor Cap Net to net.

43 Bush Net to net.

44 High TensionCoil Net to net.

45 Contol Cable Set (1 Set = 4 Nos.) Net to net.

46 Rear View Mirror Set(1 Set=2 Nos.)

Net to net.

47 Wiring Harness Net to net.


49 Petrol Cock Assembly Net to net.

50 Front Suspension Spring Net to net.

51 Rear Shock Absorber Net to net.

52 Antidive Link Complete Net to net.

53 Auto Lamps Set (Bulbs only) (1 Set = 8 Nos.)

Net to net.

C180

54 Decal (1 Set = 2 Nos.) Net to net.

55 Blinker Set (1 Set = 4 Nos.) (without bulbs)

Net to net.

56 Auto Switch Assembly (1 Set = 2 Nos.)

Net to net.

57 Throttle Pipe Net to net.

58 Tail Lamp Assembly (without bulbs)

Net to net.

59 Spindle Net to net.

60 Ceramic Magnet Net to net.

61 Brake Liner Net to net.

62 Wiring Harness for Stator Net to net.

63 Front Link Net to net.

64 Speedometer Net to net.

65 Steering and Seat Lock & Key Net to net.

66 E.I.S Assembly (without SCR and Diode)

Net to net.

67 SCR and other Electronic Components

Net to net.

68 Diodes Net to net.

69 Reflector Net to net.

70 Head Lamp Assembly (without bulbs)

Net to net.

71 Cylinder Block Net to net.

72 Solid State AC Flasher Assembly Net to net.

73 Hot Die Steel Blocks

74 High Speed Steel

75 Inserts

76 Cutting Tools

77 Grinding Stone

78 Adhesives and Sealants

79 Steel Shots

Note 1. The Item of import and its specification should conform/match with the export product. 2. Import items mentioned at Sl. No. 73 to 79 are allowed upto 5% of FOB value of exports.


33.45 kgs

2 Hot Rolled Prime Steel Sheets/Coils

2.00 kgs

3 Seamless Steel Tubes 0.0735 Mtr.


6.38 kgs

5 Silicon 0.888 kg

6 Copper 0.153 kg


0.163 kg


9 Polyol 265.000 gms

C966 Above 60 CC and upto 100 CC Scooter in CKD/SKD/CBU Condition.


C181


12 Synthetic Rubber (NBR/SBR/PBR)

36.36 gms



1110.110 gms

15 Poly Propylene Granules 1417.000 gms

16 High Density Polyethelene 585.900 gms

17 ABS Granules 2513.700 gms

18 Nylon Granules 99.750 gms

19 PVC/Artificial leather Cloth 0.670 Sq.Mtr.



22 Crank Shaft Assembly(without Bearings)

Net to net.

23 Tyres (1 Set= 3 Nos.) Net to net.


25 Output Shaft Assembly Net to net.

26 Carburator Assembly Net to net.


28 Clutch Assembly Complete Net to net.

29 Driving Sprocket Net to net.


31 Pinion Shaft Assembly Net to net.


Net to net.

33 Bearing (SKF 6203.C3) or equivalent

Net to net.


Net to net.

35 Needle Roller Bearing (KZK 162212) or equivalent

Net to net.

36 Needle Roller Bearing (KBK 121516) or equivalent

Net to net.

37 Helical Gear Net to net.


39 Central Bush- brake Drum Net to net.

40 Horn Net to net.

41 Front Hub Pin Net to net.

42 Supressor Cap Net to net.

43 Bush Net to net.

44 High Tension Coil Net to net.

45 Control Cable Set (1 Set = 4 Nos.)

Net to net.

46 Rear View Mirror Set(1 Set=2 Nos.)

Net to net.


C182




51 Rear Shock Absorber Net to net.

52 Antidive Link Complete Net to net.


Net to net.


55 Blinker Set (1 Set = 4 Nos.) (without bulbs)

Net to net.

56 Auto Switch Assembly (1 Set = 2 Nos.)

Net to net.

57 Throttle Pipe Net to net.

58 Tail Lamp Assembly (without bulbs)

Net to net.



61 Brake Liner Net to net.

62 Wiring Harness for Stator Net to net.

63 Front Link Net to net.


65 Steering and Seat Lock & Key Net to net.

66 E.I.S Assembly (without SCR and Diode)

Net to net.


Net to net.


69 Reflector Net to net.

70 Head Lamp Assembly (without bulbs)

Net to net.

71 Bobbin Charging Coil Net to net.

72 Duct Net to net.


74 High Speed Steel

75 Inserts

76 Cutting Tools

77 Grinding Stone


79 Steel Shots

Note 1. The item of import and its specification should conform/match with the export product. 2. Import items mentioned at Sl. No. 73 to 79 are allowed Upto 5% of FOB value of export.

1 No 1 Metels

a) Alloys Steel Sheet/Strips/Bars 14.520 kgs

b) CRCA Sheet/Coil/Strips 30.710 kgs

c) H.R.Coil/Strips 6.150 kgs

C967 45 CC to 75 CC Motorcycles in CBU/ SKD/ CKD condition

d) Aluminium Alloy Ingots 24.165 kgs

C183

e) M S Rods/ Bars 1.4777 kgs

2 Chemicals

a) Synthetic Rubber (SBR/PBR) 6.570 kgs

b) Paints 1.0 kgs

c) P U Foam 0.575 kgs

d) PVC leather cloth 2.20 kgs

e) Nylon Granules 1.10 kgs

f) HDPE Granules 1.10 kgs

g) PVC Resin (Paste Grade) 0.50 kgs

h) P.P. Granules 2.50 kgs

3 Components & Parts, Assemblies and Sub-Assemblies :-

a) Bearings (C/SBRG-17) 2 Nos

b) Bearings (Clutch BRG-5184728) 1 Nos

c) Bearings (Needle BRG. BIG) 1 Nos

d) CDI Unit 1 Nos

e) Generator Assembly 1 Nos

f) Spark Plug 1 Nos

g) High Tensile/Nut/Bolts Screw/Rivets.

0.0792 kg

h) Piston,Piston Ring and Pin 1 set

i) Gear Box 1 Nos.

j) Flasher 1 Nos.

k) Tail Light 1 Nos.

l) Head Light 1 Nos.

m) Speedometer 1 Nos.

n) H.T. Coil 1 Nos.

o) Brake Shoe 4 Nos.

p) Cable 11 mtrs

q) Reflector 2 Nos

r) Indicator 2 Nos

s) Filter 1 Nos

t) Lock 3 Nos

u) Automobile Bulb 7 Nos

(1) The items of import and its specifications should conform with the export product


35.34 kgs

2 Coated Prime Steel Sheets/Strips/Coils

1.243 kgs

3 Hot Rolled Prime Steel Sheets/Strips/Coils

3.047 kgs

4 Seamless Alloy Steel Tubes 0.082 Mtr.


10.44 kgs

C968 Above 75 CC and upto 100 CC Motorcycle in CKD/SKD/CBU Condition

6 Silicon 1.428 kg

C184

7 Copper Cathode/Wire Bar/Rod 0.251 kg


0.214 kg

9 Natural Rubber 3.108 kgs

10 Nickel 0.153 kg


12 Synthetic Rubber (NBR /SBR/PBR)

0.567 kg



358.733 gms

15 Polypropylene Granules 1663.767 gms

16 PVC/Artificial 0.500 Sq.Mtr.

17 Paints 0.500 Ltr.

18 Nylon Granules 0.556 kg

19 Main Shaft Assembly Net to net.

20 Crank Shaft Assembly Net to net.

21 Multiple Gear Assembly Net to net.

22 Front Shock Absorber Net to net.

23 Rear Shock Absorber (1 Set = 2 Nos.)

Net to net.





Net to net.


Net to net.


Net to net.


Net to net.

31 Bearing (SKF 6301ZR.C3) or equivalent

Net to net.

32 Bearing (SKF 6004.C3) or equivalent

Net to net.

33 Speedometer Complete Net to net.

34 Auto Cable Set (1 Set = 6 Nos.) Net to net.

35 Rear View Mirror Set (1 Set=2 Nos.)

Net to net.




39 Auto Switches Set (1 Set = 4 Nos.)

Net to net.


41 Assembly Lamp Indicator Rear (1 Set = 2 Nos.)

Net to net.


C185


Net to net.

44 Clutch Bush Assembly Net to net.

45 Front Side Indication Lamp Assembly (1 Set = 2 Nos.)

Net to net.

46 Front Link Assembly Net to net.


48 Steering Lock Barrel/Key Net to net.

49 Tail Lamp Assembly Net to net.


51 Stator Harness Net to net.


53 Horn Net to net.

54 Tool Kit Complete Net to net.

55 Needle Roller Bearing Net to net.

56 Hub Pin Set (1 Set = 2 Nos.) Net to net.

57 Elctronic Ignition Unit Assembly (without SCR & Diode)

Net to net.

58 Bush Net to net.

59 Outlet Tube Assembly Assembly Net to net.

60 Sector Gear Assembly Net to net.

61 Reinforcement Assembly Net to net.

62 Carrier Assembly Net to net.


64 Oil Seal (1 Set = 2 Nos.) Net to net.

65 Nipple Spoke (1 Set = 72 Nos.) Net to net.

66 Sprocket Wheel (1 Set = 2 Nos.) Net to net.

67 Manifold Net to net.


69 Inner Cage Net to net.

70 Bearing Carrier Net to net.

71 Spoke (1 Set =36 Nos.) Net to net.

72 Engine Gear Net to net.

73 Pillion Holder Net to net.


Net to net.



77 High Speed Steel

78 Inserts

79 Cutting Tools

80 Grinding Stone


82 Steel Shots

C186

Note. 1 The item of import and its specification should conform/match with the export product. 2. Import items mentioned at Sl. No. 76 to 82 are allowed Upto 5% of FOB value of export.

1 No. 1 Air Filter 1 No.

2 Automotive Battery 1 No.

3 Bearing (All types other than Engine Bearing) such as Ball Bearing/ Taper/ Cylindrical/ Needle Roller Bearings

Net to net.

4 Brake Assembly (Prime and/ or Secondary)

1 No.

5 Clutch Assembly (Including Split/ Torque Type)

1 No.

6 Internal Combustion Engine Complete OR

1 No.

6 a) Piston Rings Net to net.

b) Gaskets 1 No.

c) Oil Seal for Engine (Front and/or Rear)

2 Nos.

d) Pistons 4 Nos.

e) Injectors 4 Nos.

7 Fuel Injection Pump 1 No.

8 Front Axle (2 Wheel Drive and/or 4 Wheel Drive) complete and/or Parts/ Accessories

1 No.

9 Fuel Filter 1 No.

10 Hydraulic Pump (Including Auxiliary hydraulic Pump)

1 No.

11 Hydraulic Cylinder 1 No.

12 Hydraulic Valves 1 No.

13 Oil Seals (other than Engine) Net to net.

14 Oil Pump 1 No.

15 Hydrostatic Unit/ Valves for Hydraulic Transmission

1 No.

16 Radiator 1 No.

17 Seat Assembly 1 No.

18 Synchropacks and/or Synchroniser

1 No.

19 Silencer 1 No.

20 Frontwheel Tyre 1 Set

21 Rearwheel Tyre 1 Set

22 Frontwheel Tyretube 1 Set

23 Rearwheel Tyretube 1 Set

24 Front Wheelrim 1 Set

25 Rear Wheelrim 1 Set

26 Water Pump Seal 1 No.

27 Water Pump 1 No.

28 'O' Ring Net to net.

C969 Agricultural Tractor in CKD/ SKD/ CBU/ SKID condition thereof

29 Transmission complete or 1 No.

C187

components thereof

30 Alternator 1 No.

31 Starter Motor 1 No.

32 Turbo Charger 1 No.

33 Safety Neutral Switch 1 No.

34 Rops (Safety Equipment) Roll Over Protection Frame

1 Set

35 Wiring Hanrness 1 Set

36 Oil Seperator 1 Set

37 Auxiliary Valves 1 No.

38 Relevant Alloy Steel Rods/ Rounds/ Billets


39 Relevant Hot Rolled/ Cold Rolled Steel (Sheets/ Wide Coils)


1 No 1 Copper electrolytic grade standard wire/ bar/ rod

0.7 Kg

2 CR Steel Sheet extra deep drawing 0.8 to 1 mm thick

4.2 Kg

3 Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia

5.3 Kg

4 Solder - Tin - 80% Lead - 20 % 0.01 Kg

5 Polyester sheet/strip/film 25 to 200 Micron thick

0.04 Kg

6 Ball Bearings 2 Nos

7 Power (Rectifier) Diodes Net to Net

8 Regulator Net to Net

C970 Alternator Assembly

9 Rectifier 3A 200 V PIV Net to Net

1 M.T. of piston

1 Aluminium/ Aluminium Scrap 1279 kg

2 Copper 12 kg

3 Nickel 12 kg

4 Magnesium 18 kg

C971 Aluminium Pistons, exported in fully machined condition

5 Silicon 162 kg

C972 Steel Anchor Pin 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.100 kg/Kg Content in export product.


2 Kg


6 Kg

3 Steel rod free cutting FNIA/SAE-8620 or eqv. 5-36 mm dia

2.3 Kg

C973 Armature for Delcoremy type motor

4 Solder Tin - 80% Lead - 20 % 0.05 Kg


0.6 Kg


1.6 Kg


0.5 Kg


C974 Armature for Dynamo

5 Polyester sheet/strip/film 25 to 0.02 Kg

C188

200 Micron thick

1 Kg 1 Phenol Formaldehyde Resin 0.223 Kg

2 Brass Chips 0.028 Kg

3 Asbestos raw 7015 grade 0.375 Kg

C975 Asbestos brakelinings with Brass chips

4 Asbestos Raw - 5221 grade 0.100 Kg


2 Asbestos Raw 7015 grade 0.456 Kg

C976 Asbestos brakelinings without Brass chips


1 Kg 1 Phenol formaldehyde Resin 0.159 Kg



C977 Asbestos Clutch Facings

4 Asbestos Raw - 5221 grade 0.149 Kg

1 kg 1 Phenol Formaldehyde Resin 0.18 kg

2 Asbestos Raw in different grades 0.65 kg

3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Acrylonitrile Butadiene Rubber/ Nitrile Butile Rubber, Copper Powder, Bonding Adhesive

Not exceeding 4% of the FOB value of export

C978 Asbestos Disc Brake Pads

4 Misc. items: Grinding Wheels (Diamond/Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts



2 Fibre Class Chopped Strands 0.095 Kg


C979 Asbestos Free brakelinings with Brass chips

4 Misc. items: Grinding Wheel, Diamond/Abrasive Electrometallic Slitting Saw Carbide Tips, Mould Release Solution and Endless Emery Belt



2 Fibre Glass Chopped Strands 0.095 Kg

3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Acrylonitrile Butadiene Rubber/ Nitrile Butile Rubber, Copper Powder, Bonding Adhesive

0.012 kg

4 Misc. items: Grinding Wheel, Diamond/Abrassive Electrometallic Slitting Saw Carbide Tips, Mould Release Solution and Endless Emery Belt.

Upto 3% of FOB value of export

C980 Asbestos Free brakelinings with Nitrile Rubber

5 Iron Powder. 0.135Kg.


2 Asbestos raw in different grades/ Asbestos Yarn

0.70 kg

C981 Asbestos Moulded Non-Metallic Brake Lining

3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber/


C189

Copper Powder, Bonding Adhesive

4 Misc. items: Grinding Wheels (Diamond/ Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts



2 Asbestos raw in different grades/ Asbestos Yarn

0.70 kg

3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber/ Copper Powder, Bonding Adhesive


C982 Asbestos Moulded Clutch Facings



1 kg 1 Brass Scrap/Brass Rods OR


1 a) Copper Scrap 1.10 kg/kg content in export product

b) Zinc Ingot 1.10 kg/kg content in export product

2 Nitrile/Silicon Rubber/Teflon Tubing/Butyl Rubber


3 Rubber Chemicals 8% of weight of Rubber content in export

C983 Automobile Tyre-Tube Valves

4 Lead Refined 1.05 kg/kg content in export

1 kg 1 Copper Foils/Sheet/Strips/Plate/Ingot/Cathodes

0.26 kg

2 Brass Foils/Tubes 0.26 Kg

3 Brass Sheet 0.32 Kg

4 a) Tin Ingot 0.075 kg

C984 Automotive Radiator Core (Copper and Brass Construction)

b) Lead Ingot 0.075 Kg

1 kg 1 Copper Foils/Sheet/Strips/Plate/Ingot/Cathodes

0.22 kg

2 Brass Foils/Tubes OR (a) Copper Cathode/ Wire Bar/ Ingot/ Rod (b) Zinc Ingot

0.22 kg 0.162 kg 0.07 kg

3 Brass Sheet OR (a) Copper Cathode/ Wire bar/ Rod (b) Zinc Ingot

0.31 kg 0.228 kg 0.098 kg

4 (a) Tin Ingot (b) Lead Ingot

0.070 kg. 0.074 kg

5 Terene Sheet or CRCA Sheet/Coil/Strips

0.22 kg

C985 Automotive Radiators made of Copper and Brass

6 Flux 1% of the FOB value

C190

C986 Automotive timing chain 1.0 kg Content of Import Item


1 kg 1 Cold Rolled Alloy Steel Strip 0.350 kg

2 Cold Rolled Medium Carbon Steel Strip

0.700 kg

C987 Automotive Timing Chains for four wheeler application

3 Alloy Steel Wire Rod 0.204 kg

1 No. 1 Integral shaft water pump bearing OR

Net to Net

Ball Bearings (SKF No. to be specified)

Net to Net

2 Seal Assembly 1 No.

C988 Automotive Water Pump

3 Aluminium Alloy 1.10 Kg. per Kg. of aluminium alloy content in the export product

1 MT. 1 Carbon/Alloy Steel Bars of relevant Grade


C989 Axle Shaft

2 Unwrought Zinc 4% of the weight of Steel in export product.

C990 BB Axle 1.0 kg 1 Non-Alloy Steel Round 1.150 kg/Kg Content in the export product.

C991 Brake shoe plate 1 kg 1 HR Steel sheet/ strips/ coils 1.10 kg

C992 Bronze/ Gun Metal Impellers for pumps, all types

1 Kg 1 Brass Scrap 1.075 Kg/Kg of Brass content in export

C993 Cam 1 kg 1 Steel of quality EN 39A 1.39 kg

C994 Cam Shaft 1 kg 1 Non-Alloy Steel Rounds 1.47 kg/Kg content in the export product.

1 No 1 C R Steel sheet extra deep drawing 0.5 to 4 mm thick

0.4 Kg C995 CBH Flate for starter motor

2 Carbon brush 2 Nos

C996 Chain Cover Hinges Shakle Plates made of CRCA Sheet

1 kg 1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary

1.05 kg/Kg Content in the export product.

1 kg. 1 CRCA Sheet/ Coils (EDD Quality)


2 High Carbon/Medium Carbon Steel Strips


C997 Cluch Cover Assembly

3 Spring Steel Wire 1.10 kg/kg content in export product

1 kg 1 CRCA Sheet/Coil 1.8 kg/kg content in export product

2 High Carbon/Medium Carbon Steel Strips


3 Alloy Steel Bars 1.8 kg/kg content in export product

4 Spring Steel Wire 1.10 kg/kg content in export product

C998 Clutch Plate/Disc Assembly/Driven Plate

5 Friction Facing (To be allowed only when, the export product supplied with friction facing)

2 Nos./Assembly

C999 Commutator 1 No 1 Copper electrolytic grade wire/ 0.5 Kg

C191

standard grade bar/ rod

C1000 Cone Sleeve/Axle Stud sleeve

1.0 kg. 1 Seamless Steel Tubes 1.200 kg/Kg content in the export product.

C1001 Connecting Rod Forging 1 No. 1 Forging quality Alloy Steel in Bars/ Billets

0.00625 MT

C1002 Connecting Rods 1.0 kg 1 Non-Alloy Steel rounds 1.47 kg/Kg content in the export product.

C1003 Cooling Fins 1 MT 1 CRCA Steel Coils/Sheets 1.05 MT

C1004 Cotter pin (Split Unsplit ) made of non-alloy steel.

1Kg. 1 Non-Alloy Steel Round/Bar 1.10 kg

C1005 Cotter Pin(Split /Unsplit ) made of Alloy Steel

1 kg 1 Alloy Steel Rounds/ Bar 1.10 kg

C1006 Crank for chain wheel 1.0 kg 1 Non-Alloy Steel Round 1.470 kg/Kg content in the export product.

C1007 Crank Shaft (for four wheelers)

1.0 kg 1 Non-Alloy/ Alloy Steel rods 1.60 kg/Kg content in the export product.

C1008 Crank Shaft (for two wheelers)

1.0 kg 1 Non-Alloy Steel rounds 1.47 kg/Kg content in the export product.

1 KG 1 Forging quality alloy steel 1.400 kg C1009 Crank-shaft Forgings/ connecting rod forgings 2 Forging quality carbon steel 1.700 kg

C1010 Cylinder block for two wheelers

1 kg 1 Aluminium/Aluminium Alloy 1.2 kgs

1 No. 1 Copper Wire Bar 1.05 kg/kg content in export product

2 Asbestos Jointing Sheet 1.25 kg/kg content in export product

C1011 Cylinder Head Gasket

3 Tool Steel Upto 1% of FOB Value of export.

1 No.(Net weight of pump minimum 70 Kg)

1 M.S.Sheet/ Plate/ Angle/ Rounds/ Bar

61.6 Kgs

2 CRCA sheet 2 mm 1.85 Kgs

3 Gun Metal Scrap 2.37 Kgs

4 Pig Iron 7.99 Kgs

5 Brass 0.61 Kg

6 Nitrile 0.095 Kg

7 Stainless Steel/Special Sheet Rounds

1.10 Kgs

8 Zinc 3.0 Kgs

9 Ball Bearings 2 Nos.

10 Fasteners 0.72 Kg

11 Roller Chain 0.43 Kg

C1012 Deep Well Hand pump complete without connecting Rods with/ without spares & Tools

12 Misc. items: Welding electrodes, Electroplating salts, Cutting & other Tools measuring instruments

CIF value limited to 3% of FOB value

C1013 Deepwell hand pump with connecting rods.

1 No (net wt of pump

1 M.S. Sheet/ Plate/ Angle/ Round/ Bar

90 kg

C192

minimum 96.37 kg

2 CRCA Sheet 2 mm 1.85 kg

3 Gun Metal Scrap 2.37 kg

4 Pig Iron 7.99 kg

5 Brass 0.61 kg

6 Nitrile Rubber 0.095kg

7 Stainless Steel/ Special Steel Rounds

1.10 kg

8 Zinc 3.0 kg

9 Ball Bearings 2 Nos

10 Fasteners 0.72 kgs

11 Roller Chain 0.431 kg

12 Misc. items: Welding Electrodes, Electroplating salts, cuttings and other tools measuring instruments

3% of FOB

1 kg 1 Alloy Steel Bars/Coils Type 18 CR N 18/SAE 3415/16 mm MM CR 5/Equivalent

1.10 Kg

2 Alloy Steel Bars/Coils Type SAE 52100/Equivalent

2.93 Kg

3 Miscellaneous Items: Upto 3% of FOB value of export

C1014 Delivery valve of Fuel Injection Equipment

a)Grinding Wheel (with or without Framework) b)CBN/ Diamond Honing Stick Blank/ Support Stones/ Deburring Tools c)Carbide Cutter d)Plain Grinding Wheels/ CBN Wheels

1 kg 1 Mild Steel 1.10 kg C1015 Diesel Engine Parts (not elsewhere specified) 2 Relevant Nylon (6/66) 1.05 kg/kg content in

export

1 kg 1 Pig Iron 1.10 kg C1016 Diesel Engine Parts (not elsewhere specified) 2 Relevant Nylon (6/66) 1.05 kg/kg content in

export

C1017 Draw bars 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.5 kg/Kg content in the export product.

C1018 Drive assembly for starter motor

1 No 1 Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia

3 Kg

1 kg 1 HR Sheets/Coils 1.47 kg.

2 Alloy/Non Alloy Steel Bars/Billets/Rounds

0.21 kg.

3 Castings (Unmachined) OR

0.18 kg.

3 Pig Iron 0.25 kg.

4 Fasteners Like Nuts/Bolts/Springs/Shoe Set/Pins etc.


C1019 Drum Brake Assembly (Aggregate/SKD/CKD/KITS)

5 Friction Material Upto 12% of FOB Value of exports.

C193

6 Bonding Adhesive Upto 8% of FOB Value of exports.

7 Misc. items: Assembly Fluid, Grease, Cutting Tools Like Drills/Taps/Reamers


1 No. 1 Magnet 2 Nos.

2 Commutator 1 No.

3 Carbon Brush 2 Nos.

4 Ball Bearing 1 No.

C1020 Electric Starter

5 Moulding Powder (Specific Item to be specified both in application and licence)

1 kg/kg content in export item.


0.9 Kg


0.02 Kg

C1021 End-Cap Assembly


0.11 Kg

1 kg. 1 CRCA Sheet/ Coils 1.59 kg C1022 Engine Patti PGT ZP

2 Zinc 0.0083 kg


0.423 kg


3 EPDM Synthetic Rubber 0.35 kg

C1023 EPDM Rubber Bonded Bi-components


0.007 kg


0.282 kg


3 EPDM Synthetic Rubber 0.248 kg

C1024 EPDM Rubber Bonded Door Beading


0.007 kg

C1025 Fan Blade 1 kg 1 MS CRCA sheet/ strips/ coils including seconds/ defectives but excluding coated

1.05 kg

1 No 1 Copper electrolytic grade standard wire/bar/rod

0.85 Kg C1026 Field Coil for Starter Motor

2 Solder Tin - 80 Lead - 20% 0.03 Kg

1 Kg. 1 Non-Alloy Steel Rounds and/or billets and/or Rolled Sections viz. Plate/Flat/Bar/Rod


2 Non-Alloy Steel Prime and/or defective and/or second and/or Pickled Sheets and/or coils and/or strips


C1027 Flex Plate Assembly

3 Misc. items: Hobs, Carbide Tools upto 3% of FOB value

1 kg 1 Raw material:

a) MS CRCA Sheet/Strips/Coils including Seconds/Defectives but excluding Coated.


b) Polyacrylic Rubber Compound 1.33 Kg/kg content in the export product.

C1028 Flurocarbon Rubber (Viton) Oil Seals

2 Composition of the Compound

C194

per Kg. :

a) Flurocarbon Rubber 0.68 Kg

b) Carbon Black 0.13 Kg

c) Misc. Chemicals and Rubber Chemicals: Zinc Oxide, Stearic Acid, Antioxidants, Accelerator, Plasticizer, Process Aids, Sulphur, Bonding Agent and Processing Oil

0.07 Kg

Note : 1. Rubber Chemicals should not exceed 0.02 kg of total chemicals.

1 kg content of Import Item

1 Non-Alloy Steel Round and/or Billets and/or Rolled Sections viz. Plate/Flat/Strip/Bar/Rod

1.32 kg C1029 Flywheel Starter Ring Gear

2 Misc. items: HOS/Graphite Tools Upto 3% of FOB value of export

1 No. with specified weight

1 Alloy/Non-Alloy Steel bars/Rods/Billets/Blooms/Ingots (only relevant steel required is to be allowed i.e. against Alloy Steel product, Alloy Steel and against Non-Alloy Steel product, only Non-Alloy Steel isto be allowed


2 Misc. items: Rectangular Die Steel Blocks and Die Steel Rounds, Consumables including consumable tools

4 % of FOB Value.

C1030 Forged Crankshaft Fully machined (Made of Alloy/Non-Alloy Steel)

3 Furnace Oil 0.5 KL/MT of export

1 MT 1 Forging Quality Non-Alloy Steel in Blooms/Billets/Bars

1.80 MT

2 Rectangular Die Steel Blocks & Die Steel Rounds

0.025 MT

C1031 Front Axle Beam-Fully Machined

3 Furnace Oil 0.5 KL

C1032 Front Axle beam/I-Beam 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.3 kg/Kg content in the export product.

1 No. 1 Cold Rolled (Prime) Steel Sheets/Strips/Coils


2 Coated (Prime) Steel Sheets/Strips/Coils


3 Hot Rolled (Prime) Steel Sheets/Strips/Coils


4 Alloy Steel Wire 1.07 kg/kg content in the export product

5 Aluminium Alloy Ingots 1.04 kg/kg content in the export product

6 Seamless Steel Tubes 1.02 kg/kg content in the export product

7 Super Enamelled/ Enamelled Copper Wire


8 Natural Rubber 1.05 kg/kg content in the export product

9 PVC/Artificial Leather Cloth 1.05 Sq.mtr/Sq.mtr content in the export product

C1033 Three Wheeler Drive Away Chassis/ Freight Carrier Powered by Petrol engine of 125 CC to 300 CC in CBU/ SKD/CKD Condition

10 Polyol 1.05 kg/kg content in the export product

C195

11 Isocyanate 1.05 kg/kg content in the export product

12 Butyl Rubber 1.05 kg/kg content in the export product

13 Relevant Synthetic Rubber (NBR/ SBR/ PBR)





16 Polypropylene Granules 1.05 kg/kg content in the export product

17 Paints 1% of the FOB value

18 Nylon Granules 1.05 kg/kg content in the export product

19 Main Shaft Assembly Net to net

20 Crank Shaft Assembly Net to net.

21 Relevant set of gears-1 set each Net to net.





26 Bearing (FAG 98305.C3) or Equivalent

Net to net.

27 Bearing (SKF 6204) or Equivalent

Net to net.

28 Bearing (SKF6301) or Equivalent

Net to net.


Net to net.

30 Bearing (FAG 98205) or Equivalent

Net to net.


Net to net.

32 Bearing(SKF 1838002) or Equivalent Needle bush

Net to net.

33 Speedometer Complete Net to net.


35 Rear View Mirror Set Net to net.

36 Wiring Harness set Net to net.



39 Auto Switches Set Net to net.

40 Rotor Net to net.

41 Automotive lights with bulbs Net to net.

42 Magnet container assembly/ rotor Net to net.

43 Lock assembly Net to net.


45 Horn Net to net.

46 Tool Kit Set Net to net.

C196

47 Needle Bush Net to net.

48 Hub Pin Set (1 Set =2 Nos.) Net to net.



Net to net.



53 Splined Shaft Net to net.

54 Hand Brake Drive Complete Net to net.

55 Chain Adjuster/ Tensioner Net to net.

56 Terminal Board Net to net.

57 Ring Nut-Right Net to net.

58 Lamination Pack Coil Net to net.

59 Idler Net to net.

60 Set of Sprocket Net to net.

61 Complete Clutch Cover shaft Net to net.

62 Bush with Teeth Net to net.

63 Trunion Net to net.

64 Set of Bearing Races Net to net.

65 Cam Net to net.

66 Engine Gear Net to net.

67 Reverse Control Gear Net to net.

68 Idler Gear Assembly Net to net.

69 Condenser Net to net.

70 Wheel Axle Assembly Net to net.

71 Differential Assembly Net to net.

72 Brake Lever Assembly Net to net.

73 Brake System and parts thereof Net to net.

74 Wiper Motor Net to net.

75 Upper Attachment Net to net.

76 Wiper Blade Assembly Net to net.

77 Wind Shield Glass Net to net.

78 Torsion Bar Net to net.

79 Anti Vibration Mounts Net to net.


81 Clutch Gears Cross Net to net.

82 Clutch Assembly and Parts thereof

Net to net.

83 CNG Cylinder Net to net.

84 CNG /LPG KIT (excluding Cylinder)

Net to net.

85 Cones Net to net.

86 Crankcase Net to net.

87 Crankcase Cover Net to net.

C197

88 Cross Net to net.

89 Cylinder Head Casting Net to net.

90 Fan Cowl Net to net.

91 Flexible Coupling/Flange Net to net.

92 HUB (set of 2) Net to net.

93 Isolator Vibration Net to net.

94 Lever GR Stop Control Net to net.

95 Lever Group for Max Controlling Net to net.

96 Oil Plug Assembly Net to net.

97 Regulating Lever Assembly Net to net.

98 Reverse Motion Shaft Net to net.

99 Rod Control lever Sub-Assly Net to net.

100 Screw Net to net.

101 Set of Rings Net to net.

102 Set of Seals Net to net.

103 Set of Spacers Net to net.

104 Spark Advance Regulator Assly Net to net.


106 Starting Ring Gear Net to net.

107 Tappet Cup Net to net.

108 Thrust Bearing Group Net to net.

109 Tyre (set of 4 Nos) Net to net.

110 Valve for Piston Cooling Net to net.

111 Valve of set Net to net.

112 Torsion Bar Bearing Assembly Net to net.

113 Wheel Cylinder Net to net.

114 Upper Pin Net to net.

115 Lower Pin Net to net.


117 High Speed Steel

118 Cutting Tools

119 Inserts

120 Steel Shots


122 Grinding Stone

Note: CIF value of item mentioned at Sl. No. 116 to 122 taken together is restricted to 5% of FOB value

C1034 Front/rear axle shaft 1Kg. 1 Non-Alloy Steel Round/ Billets 1.300 kg

1 No. A.Raw Materials:

1 Alloy steel Bars/Coil to specification SAE 52100 or equivalent


C1035 Single Cylinder Fuel Injection Pumps for Diesel Engines

2 Alloy steel Bars/Coil to Specification SAE 3415 or 16 Mn CrS5 or equivalent


C198


4 Free Cutting Leaded/Non Leaded Bars/Coils including Ultrasonically tested Steel or equivalent


5 Steel to specification EN 8M or VS 13113 or equivalent


6 Spring Steel 1.11 kg/kg content in export

B.Components:

7 Element Net to net.

8 Delivery Valve Net to net.

9 Protective Cap Compression Spring

10 O Ring Net to Net

11 Round Head Grooved Screw Net to Net

12 Guide Plate Net to Net

13 Protective Cap Net to Net

14 Clamping Ring Net to Net

15 Pin Net to Net

16 Fillister Head Screw Net to Net

17 Spring Seat Net to Net

18 Guide Pin Net to Net

19 Plug Net to Net

20 Spring Ring Net to Net

21 Filler Piece Net to Net

22 Eccentric Bolt Net to net

23 Gasket Net to Net

24 Sleeve Net to Net

25 Control Rod net to net

26 Roller net to net

27 Roller Tappet Body net to net

28 Control Sleeve net to net

29 Retaining Ring net to net

30 Eccentric Pin net to net

31 Screw Plug Net to net

C.Miscellaneous Items:

CNB/Diamond Honing Stick Blanks/Support Stone/Deburring Tools, Hone Holders, Plain grinding Wheels/ Disc Wheels for lap/ Match Grinding/ CNB Wheels, Carbide End Mills/ Tools, Gem Shaper, Diamond Dresser, DeepHole Drill, Reamers, Oil Stones, Broaches, Drill & Calibration Fluid/ Test Oil

cif value limited to 3% of the fob value of export

C1036 Fuel Tank Cap 1 kg 1 MS CRCA sheet/ strips/ coils 1.12 kg

C199

including seconds/ defectives but excluding coated

C1037 Full Tension Sleeve made of Steel.

1Kg. 1 Non-Alloy Steel Round/ Billets 1.4 kg/Kg content in the export product.

1 MT 1 Electrolytic Tin Plate Waste 666 kgs. C1038 Gasket Composite Sheet-double Cemjo 2 Raw Asbestos Fibre:

Grade 7M - 450 Grade 6D - 550

246 kgs. 82 kgs.

1 MT 1 Electrolytic Tin Plate Waste 927 kgs. C1039 Gasket Composite Sheet-Double Steel Faced Cemjo

2 Raw Asbestos Fibre: Grade 7M - 450 Grade 6D - 550

76 kgs. 25 kgs.

1 MT 1 Electrolytic Tin Plate Waste 743 kgs C1040 Gasket Composite Sheets-Single Cemjo 2 Raw Asbestos Fibre:

Grade 7M - 450 Grade 6D - 550

202 kgs. 67 kgs.

C1041 Gaskets 1 Meter 1 Grafoil Tape (Papyox Smooth Robbon)

1.1 Mtr./Mtr. net content in export product.


1.6 Kg


6.5 Kg


1.2 Kg



0.03 Kg

6 Carbon brush 2 No

C1042 Generator (Dynamo) Assembly

7 Ball Bearings 2 No

C1043 Half Collets for engine valves

1 Kg 1 Cold Rolled (Profile) Non-Alloy Carbon Steel Strip

1.715 Kg

C1044 Hand Primer for Fuel Feed Pumps of Diesel Vehicles

1000 Nos. 1 Free Cutting Leaded Steel Bars 416 kgs.

1 No (Net wt of Pump minimum 78.6 kg)


55 kg

2 CRCA Sheet 2 mm 4.75 kg

3 Brass 2.2 kg

4 Nitrile Rubber 0.66 kg


13.34kg

6 Zinc 3.5 kg

7 Welding Electrodes Upto 2% of FOB value of exports.

8 PVC Resin 2.8 kg

C1045 Handpump with connecting /pump rods (Model Afridev)

9 Nylon 6/66 Granules (moulding grade) (Only relevant item required/used is to be allowed)

1.8 kg

Note : 1. The quantity of import item 5 will increase with increase in the number of Connecting/Pump

C200

Rods on pro-rata basis.

C1046 Helical Coil Spring 1 kg 1 Spring Steel Wire rod OR Spring Steel wire

1.10 kg 1.01 kg

C1047 Steel Hub Bolts 1Kg. 1 MS/Alloy/Non-Alloy Steel Rounds

1.300 kg

C1048 Steel Hub cone 1Kg 1 Non-Alloy Steel Round 1.150 kg

1 No 1 Copper Wire enamelled 22 to 46 SWG

0.13 Kg

2 Insulating Kraft paper electrical grade

0.02 Kg

C1049 Ignition Coil oil filled

3 Silicon steel sheet 0.5 to 1 mm thick

0.3 Kg

1 No. 1 Copper electrolytic grade standard wire/ rod/ ingots

0.14 Kg

2 Insulating Kraft paper electrical grade

0.15 Kg

3 Silicon steel sheet 0.5 to 1 mm thick

0.80 Kg

4 Epoxide resin 0.075 Kg

C1050 Ignition Coil Resin Cost

5 Hardner 0.075 Kg

100 Nos. 1 Soda Glass Tubing 1.15 kg/kg content in exports.

2 Tungston Filament 115 Nos./100 Nos. of relevant Tungston Filament in exports.

3 Glass Shell 125 Nos./100 Nos. of Glass Shell in exports.

C1051 Incandascent Automobile Bulbs upto 30 Volts

4 Lamp Caps 115 Nos./100 Nos. of Lamp Caps in exports.

1Kg. 1 Valve steel (Alloy Steel/ Non-Alloy Steel) Bars OR Inconel Alloy 751 Bars

1.40 kg/Kg content in the export product 1.20 kg/kg content in the export product

C1052 Inlet /Exhaust Valves

2 Hard Facing Metal Alloy Powder of Grade Ni60, Stellite 1, 6 and 12

10 gms/Valve

C1053 Deleted

1 Kg 1 SAE 52100 Ball Bearing Steel and/or Alloy Steel; Hot Rolled and/or Cold Reduced/Cold oilgared and/or Spherodised Annealed and/or phosphate Coated; Seamless Tubes and/or Pipes in Random Lengths (ExcludingStainless Steel)

0.774 Kg

2 Nickel Chromium and Molybdenum Base Steel and/or Alloy Steel; Hot Rolled and/or Cold Drawn and/or Spherodised Annealed and/or Phosphate Coated; Wire Rods and/or Bars; in Random Lengths(Excludingstainless steel)

1.270 Kgs

C1054 Integral Shaft Water Pump bearing for automotive applications

3 SAE 52100 Ball Bearing Steel and/or Alloy Steel; Hot Rolled

0.060 Kg

C201

and/or Cold Drawn and/or Spherodised Annealed and/or Phosphate Coated wire and/or Wire Rods and/or Bars; In Random Lengths (Excluding Stainless Steel)

4 Cold Rolled Spring Steel Sheets and/or Strips and/or Coils

0.027 Kg

5 Misc. Items: Honing Sticks and/ or Internal and/ or External Track and/ or Raceway Grinding Wheels

2.5% of FOB value

C1055 King Pin made out of Steel.

1 kg 1 Relevant Alloy Steel Rounds 1.10Kg

C1056 Laminated Leaf Springs of steel.

1 kg. 1 Relevant Silico Mangenese Steel. 1.05 kg

C1057 Laminated Springs 1 kg 1 Spring Flat Bar 1.05 kg

1 No. 1 a) Pure Lead 1.02 kg/kg content in the export product

b) Antimony 1.02 kg/kg content in the export product

c) Lead Calcium Alloy containing Calcium between 0.035% to 0.16% and Tin upto 1.7% OR


1 a) Pure Lead 1.02 kg/kg content in export product.

b) Antimony Lead Alloy 1.02 kg/ kg content in export product.

2 Battery Separators OR Rolls of Battery Seperators OR

Net to net 1.05 Sq.Mtr./Sq.Mtr content in the export product

2 a) Synthetic Pulp Porous Paper Sheet OR


a) Polythelene Sheet 1.03 kg/kg content in export product.

b) Acid Resistant Glass 1.05 kg/kg content in the export product

c) Nitrile Rubber Based Glue 1.05 kg/kg content in the export product

3 Tubular Bags Net to net

4 Relevant Battery Cell Container and and Lids/ Relevant Battery Container and Lids OR Polypropylene Granules

Net to net 1.05 kg/kg content in the export product

5 Battery Vent plugs Net to net

6 Polarity Indicator Rings Net to net

7 Rubber Grommet Net to net

8 Electrolytic Copper Net to net

C1058 Lead Acid Storge Batteries of all types/Battery Cells.

9 Pure Tin 1.02 Kg/Kg Content the export product

C202

10 Lignin 1.02 kg/kg content in the export product

11 ABS Resin 1.035 kg/kg content in the export product

12 Epoxy Resin 1.05 kg/kg content in the export product

13 Hardner 1.05 kg/kg content in the export product

14 Pigment Red/Black 1.05 kg/kg content in the export product

15 Ink for Silk Screen 1.01 kg/kg content in the export product

16 Additives 1.05 kg/kg content in the export product

17 Terminals Net to net

18 Safety vent valves Net to net

1 No. A. RAW MATERIAL

1 Hot Rolled Steel Plates 143.66 KG

2 Thermo-Plastic Tubing (Nylon) 21.10 KG.

3 Terne Coated Steel Coils 13.20 KG.

4 Cold Rolled Steel Sheets. 123.56 KG.

B. COMPONENTS FOR: GEAR BOX

5 Toothed Wheel (Gear) 8 NO.

6 Shaft 4 NO.

7 Shim 1 NO.

8 Front Cover 1 NO.

9 Adjustment Ring 1 NO.

10 Sliding Sleeve 3 NO.

11 Fixed Hub 3 NO.

12 Ring Toothed Synchro Flange 6 NO.

13 Flange 1 NO.

14 Piston 12 NO.

15 Spring 12 NO.

16 Ext.Cross Control 1 NO.

17 Cover 1 NO.

18 Ring Lock 1 NO.

19 Smooth Bush (8859255/282) 2 NO.

20 Side Cover 1 NO.

21 Selector Block Assy. 1 NO.

22 Control int. Shaft 1 NO.

23 Pin Sub-Assy 1 NO.

24 Spring Lock Washer 1 NO.

25 Bearing Sleeve (8861547) 1 NO.

26 Shoulder Screw with Flange 40 NO.

C1059 Commercial Vehicles of GVW upto 7.5 MT in CBU/SKD/CKD condition

27 Threaded Plug 1 NO.

C203

28 Magnetic Plut 1 NO.

29 Synchro Ring 5 NO.

30 Fork 3 NO.

31 Taper Roller Bearing (8858471) 2 NO.

32 Four conrct ball bearing (8859238)

1 NO.

33 Needle Roller Bearing (8859576) 1 NO.

34 Roller Bearing (8861545) 1 NO.



37 Four Contact Ball Bearing (8863183/99431568)

1 NO.


39 Seal for Rotary Shaft 2 NO.

40 Aluminium front/ rear Gear Box Casing

2 NO.

C. CHASSIS COMPONENTS

41 Telescopic Gearshift 1 NO.

42 Wheel Bearing Inner Front Axle (25590/25520)

2 NO.

43 Wheel Bearing Outer Rear Axle (3982/3920)

2 NO.

44 Wheel Bearing Inner Rear Axle (F 02 460 10)

2 NO.

45 Insulator Rubber 2 NO.

46 Mounting Frame Side Member Insulator

2 NO.

47 CAB Mounting Bush Rear 2 NO.

48 CAB Mounting Bush Front 2 NO.

49 Spherical Bearing Assembly(98470006)

1 NO.

50 Centre Bearing - Propellor Shaft (F 74 390 00)

1 NO.

51 Tank Radiator 1 NO.

52 S A W Brake Components 1 SET

53 Differential Bearings (44143/44348)

1 NO.

54 Differential Bearing (HM-803110/803146)

1 NO.

55 Differential Bearing (1228-C-55) 1 NO.

56 Differential Bearing (JM-511910/3994)

2 NO.

57 Disc Wheel Compone 7 NO.

58 Exhaust Brake 1 NO.

D. ENGINE COMPONENTS

59 Front Oil Seal 1 NO.

60 Rear Oil Seal 1 NO.

61 Pulley Bearing 1 NO.

C204

62 Thrust Washer 4 NO.

63 Circlip 8 NO.

64 Timing Gear Cover 1 NO.

65 Con-Rod Half Bearing 8 NO.

66 Bush 4 NO.

67 Damper Flywheel 1 NO.

68 Fan Hub 1 NO.

69 Oil Pump Complete 1 NO.

70 Timing Gears : Inj. Pump 1 NO.

71 Timing Gears : Power Steering 1 NO.

72 Exh. Mamifold 1 NO.

73 Sump (Oil Pan) (Heat Exch.) 1 NO.

74 CS Bearing 10 Nos.

75 Rocker Shaft 1 NO.

76 Conrod 4 NO.

77 Timing Gear Covers 1 NO.

78 Piston assy (with Rings) 4 NO.

79 Crankcase (with Liner & Brg. Caps)

1 NO.

80 Cylinder Head 1 NO.

81 Water Pump 1 NO.

82 Timing Gears : Idler 1 NO.

83 Timing Gears : Cam 1 NO.

84 Cyl. Head Cover 1 NO.

85 Pipe Assembly 1 NO.

86 Inter Bush 1 NO.

87 Thermostat 1 NO.

88 Injectors 4 NO.

89 Injector Pipe Assy 4 NO.

90 Bolt with Washer 2 NO.

91 Exh. Manifold Bolt 2 NO.

92 Crankshaft Complet 1 NO.

93 Cyl. Head Gasket 1 NO.

94 Valve Cone 16 NO.

95 Valve Collar Upper 8 NO.

96 Integral Shaft Bearing 1 NO.

97 Tappet 8 NO.

98 Inj Pump Drive Couping 1 NO.

99 Pump Control Bush 1 NO.

100 Rocker Lever 8 NO.

101 Tappet Adj Screw 8 NO.

102 Washer 4 NO.

103 Cam Shaft 1 NO.

C205

104 Rotary Fuel Pump Components 1 SET

E. DAY CAB TRIM COMPONENTS :

105 Fasteners - Cab Trim (49 Items) 1 SET

106 Hook Assy Cab Lock 2 NO.

107 Lock Assy Cab Safety 1 NO.

108 Door Lock Set 1 NO.

1 No. 1 Hot Rolled Steel Sheet Pickled and Oiled - 4 mm


2 Hot Rolled Steel Plates Pickled & Oiled - 6.4 mm


3 Relevant Lining Net to net.

4 Shoe Dip 10 gms

5 Bonding Ahesive 10 gms

C1060 Lined Shoe Assembly for Automobiles

6 Trichloroethylene 100 gms

C1061 Machined trailor ball/hitch pin/linkage pin

1Kg. 1 Non-Alloy Steel Round/ Billets 1.750 kg

1 No. RAW MATERIAL

1 Hot Rolled Steel Plates 226.24 kgs

2 Thermo-plastic Tubing (Nylon) 24.38 Meters

3 Terne Coated Steel Coils 17.80 kgs

4 Cold Rolled Steel Sheets 123.56 kgs

COMPONENTS

5 Toothed Wheel (Gear) 8 No.

6 Shaft 4 No.

7 Shim 1 No.

8 Front Cover 1 No.

9 Adjustment Ring 1 No.

10 Sliding Sleeve 3 No.

11 Fixed Hub 3 No.

12 Ring Toothed Synchro Flange 6 No.

13 Flange 1 No.

14 Piston 12 No.

15 Spring 12 No.

16 Ext.Cross Control 1 No.

17 Cover 1 No.

18 Ring Lock 1 No.

19 Side Cover 1 No.

20 Pin Sub-Assy 1 No.

21 Spring Lock Washer 1 No.

22 Shoulder Screw with Flange 40 No.

23 Threaded Plug 1 No.

24 Magnetic Plug 1 No.

C1062 Commercial Vehicles of GVW above 7.5 MT and upto 16.5 MT in CBU/CKD/SKD condition

25 Aluminium Front/Rear Gear Box 2 No.

C206

Casing

26 Selector Block Assy 1 No.

27 Control Int.Shaft 1 No.

28 Smooth Bush 4 No.

29 Bearing Sleeve (8861547) 1 No.

30 Synchro Ring 5 No.

31 F O R K 3 No.

32 Taper Roller Bearing (8858471) 2 No.

33 Four Contact Ball Bearing (8859238)

1 No.

34 Needle Roller Bearing (8859576) 1 No.

35 Roller Bearing (8861545) 1 No.



38 Four Contact Ball Bearing (8863183/99431566)

1 No.


40 Seal for Rotary Shaft 3 No.

41 Telescopic Gearshift 1 No.

42 Exhaust Brake 1 No.

43 Steering Column Bearing (SKL-F-93233.1)

2 No.

44 Clutch Release Bearing (K0201410)

1 No.

45 Housing PVC 1 No.

46 Insulator Rubber 2 No.

47 Mounting Frame Side Member Insulator

2 No.

48 Spherical Bearing Assembly (9847000

1 No.

49 Cargo - Badge 1 No.

50 Nozzle Windscreen Washer 2 No.

51 Tank Radiator 1 No.


2 No.


2 No.

54 Wheel Bearing Inner Rear Axle (42687/42620)

2 No.

55 Centre Bearing - Propellor Shaft (F 7439000)

1 No.

56 S A W Brake Components 1 Set

57 Differential 1 No.

58 Differential Bearings (34478/34306)

1 No.

59 Differential Bearings (HM804810/846)

1 No.

60 Differential Bearings (55437/55200C)

1 No.

C207

61 Differential Bearings (1228-H-580)

1 No.

62 Disc Wheel Components 7 No.

63 Oil Pump Complete 1 No.

64 Timing Gear Case 1 No.

65 Inj Pump Drive Coupling 1 No.

66 Pump Control Bush 1 No.

67 Rocker Lever 8 No.

68 Cam Shaft 1 No.

69 Water Pump 1 No.

70 Relief Valve 1 No.

71 Tappet 8 No.

72 Crankshaft 1 No.

73 Piston Set 4 No.

74 Exhaust Valve 4 No.

75 PC Nozzle Assy 4 No.

76 Fan with Bush 1 No.

77 Exh.Manifold 1 No.

78 Fan Hub 1 No.

79 Intrcooler Comp. 1 No.

80 Cartridge Filter 1 No.

81 S U M P 1 No.

82 Crkcse-Comp.Assy 1 No.

83 Cyl.Head-Com.Asy 1 No.

84 F I P 1 No.

85 Connection Sleeve 1 No.

86 Sleeve 1 No.

87 Taper Plug 2 No.

88 Plug 2 No.

89 Valve Cone 16 No.

90 RR Oil Seal 1 No.

91 Circlip 1 No.

92 Damper 1 No.

93 Ex Manifold Bolt 12 No.

94 Cyl.Hd Gskt [Thin] 1 No.

95 Water Pump Seal 1 No.

96 Filter Gasket 1 No.

97 Valve Collr Upr 8 No.

98 Front Oil Seal 1 No.

99 Int Shaft Brg 1 No.

100 Control Valve 1 No.

101 Ring Split Circlip 1 No.

102 `O' Ring Gasket 2 No.

C208

103 Ring Alignment 1 No.

104 Ring Power Steering 1 No.

105 Hub for Control Joint 1 No.

106 Line Pipe Socket 2 No.

107 Flow Cntrl Vlve 1 No.

108 Power Steering Pump 1 No.

109 Fasteners - Cab Trim (49 items) 1 Set

110 Hook Assy Cab Lock 2 No.

111 Lock Assy Cab Safety 1 No.

112 Door Lock Set 1 No.

113 24 Starter Motor 1 No.

114 CDS Steel Tubes for Injector Pipes

3.2 Mtrs.

115 Oil Pipe Support 1 No.

116 Gasket 1 No.

117 Grooved Stud 1 No.

118 Pressure Piece 6 Nos.

119 Element Cigar Lighter 1 No.

120 Ring Cigar Lighter 1 No.

121 Base Cigar Lighter 1 No.

122 Ash Tray (F7872760) 1 No.

123 Glove Box Lid 1 No.

124 Handle Assist RH 1 No.

125 Handle Assist LH 1 No.

126 Lever with Bush & Support 1 No.

127 Lead 17.105 kg.

128 GM Separators 110 Nos.

129 Antimony 0.231 kg.

130 Polypropeiene 1.79 kg.

131 Polymethyle Methacrylite Moulding Powder-Red

0.132 kg.

132 Polymethyle Methacrylite Moulding Powder-Amber

0.0525 kg.

133 Torsion Bar 1 No.

134 Poppet 1 No.

135 BallReturn Guide LH 2 Nos.

136 Roller Bearings/Shaft 2 Nos.

137 Thrust Washer 2 Nos.

138 Seal Nut 3/8" 1 No.

139 Seal Nut 5/8" 1 No.

140 Slip Seal V/Hsg 1 No.

141 Needle Roller 2 Nos.

142 Needle Thrust Bearing 1 No.

143 Seal Ring 2 Nos.

C209

144 Seal Ring Valve 1 No.

145 Seal Valve Hsg (Dirt Seal) 1 No.

146 O Ring 2 Nos.

147 O Ring Valve 2 Nos.

148 O Ring V/Hsg Slipper Seal 1 No.

149 O Ring R Piston 1 No.

150 O Ring V/Hsg 1 No.

151 Special Bolt 9/16" 6 Nos.

152 Seal Ring S/Shaft 1 No.

153 Seal Ring R/P 1 No.

154 Seal Ring S/Shaft Hsg 1 No.

155 Backup Washer 1 No.

156 Gasket S/Cover 1 No.

157 Retaining Ring (INT) 2 Nos.

158 Trunion Seal 1 No.

159 Seal S/Cover 1 No.

160 Back Up Washer S/Shaft 1 No.

161 Molecular Sleeve (Desiccant) 1.4 kg.

162 Flexible Arm 1 No.

163 Compressor Wheel MDC 1 No.

164 Hollow screw 2 Nos.

165 Gasket Ring 2 Nos.

166 Socket Head Bolt 3 Nos.

167 Segment TS 3 Nos.

168 Boost Pressure Pipe 1 No.

169 Control Valve 1 No.

170 Heat Shield 1 No.

171 Turbine Wheel Assy 1 No.

172 Flinger Sleeve 1 No.

173 Steel O Ring 1 No.

174 Segment CS 3 Nos.

175 Bolt Hex 6 Nos.

176 Journal 2 Nos

177 Snap Ring 4 Nos.

178 Piston Ring 3 Nos.

179 Thrust Ring 1 No.

180 Thrust Plate 1 No.

181 Oil Deflector 1 No.

182 Plastic O Ring 1 No.

183 Socket Head Bolt 4 Nos.

184 Washer 4 Nos.

185 Shaft Nut 1 No.

C210

186 Rubber Sleeves 1 No.

187 Copper Was Mix 0.003 kg

188 Styrene Butadiene Rubber 1502 0.23 kg

189 Styrene Butadiene Rubber 1712 0.29 kg

190 Tyre Cord Fabric 25/1680 2.52 kg

191 Rubber Chemical 0.25 kg

192 Polyvinyl Butyral Sheets 1.6512 Msqr.

193 Green Float Glass 2.8198 Msqr.




b) Nitrile Rubber compound 1.10 Kg/kg content in the export product.

(Composition of the Nitrile Rubber Compound per Kg. :

a) Nitrile Rubber 0.47 Kg

b) S.B.R. 0.05 Kg

c) Carbon Black 0.40 Kg

C1063 Nitrile Rubber Oil Seal

d) Misc. Chemicals and Rubber Chemicals: Zinc Oxide, Stearic Acid, Antioxidants, Accelerator, Plasticizer, Process Aids, Sulphur, Bonding Agent and Processing Oil)

0.07 Kg


1 kg 1 Alloy Steel Bars/Coils Type 18 CR N 18/SAE 3415/16 mm MM CR 5/ Equivalent

2.36 Kg

2 Alloy Steel Bars/Coils Type AISI M2/Equivalent

0.35 Kg

C1064 Nozzle of Fuel Injection Equipment

3 Misc. items: Gun Drill, Micro Drill, Spirol Drill, Grinding Wheel(with or without frame work), Lapping Compound, Letter/Number Inscription Punch and Honning Tools

Up to 3% of FOB value of export

C1065 Nozzles 1 kg 1 Non- Alloy/ Alloy Steel rounds 1.35 kg/kg content in the export product.

C1066 Oil Bath Gear case 1 kg 1 MS Sheets 1.073 kg

1 No. 1 EDD/DD CRCA Steel coil/sheets 333.5 kgs

2 DD HR Steel coils/ sheets 32.65 kgs

3 Terne coated sheets 9.5 kgs

4 Adhesive sealants V.O. Grey sealer

0.375 kg

5 Adhesive sealants glass sealer 0.05 Kg

6 Cold drawn section 0.128 kg

7 Double raw ball bearing SKF No.4303 ANR TN9

1 No.

8 Fuel Filter 1 No.

C1067 Passenger car (of specifications as per details given in the note below the norms)

9 Carburettor 1 No.

C211

10 Clutch Release Brg. KOYO No.RCT 4075 - 10S

1 No.

11 Prop. shaft bearing SKF No.1637459

1 No.

12 Cover Assy. Clutch 1 No.

13 Clutch Disc. Assy. 1 No.

14 High Tension Cable Assy. 6 No.

15 Brg. - Needle Counter Nissan No.32219-G1000

1 No.

16 Brg. - Needle Main Nissan No.32264-18000

1 No.

17 Brg. - Needle Main Nissan No.32264-24900

2 No.

18 Brg. - Pilot Main Nissan No.32272-18000

1 No.

19 Brg. - Ball Main Nissan No.32273-G1000

1 No.

20 Rod Fork 1 & 2 1 No.

21 Fork Shift 1 No.

22 Fork Shift Reverse 1 No.

23 Rod Fork 3 & 4 1 No.

24 Lever Striking 1 No.

25 Head Lamp 2 No.

26 Front Director Indicator Lamp 2 No.

27 Tain Lamp (with double filament)

2 No.

28 Tail Lamp (with single filament) 2 No.

29 No. Plate Lamp 2 No.

30 Rev. Warning Lamp 2 No.

31 Roof Lamp 1 No.

32 Foot Lamp 2 No.

33 Side Indicator Lamp 2 No.

34 2 Point Static Safety Seat Belts 1 Set

35 Radial Tyre & Tubes 5 Nos. on net to net basis.

36 AM/FM Radio cum cassette player with manual antenna

These 2 inputs will be allowed on relevance

37 Air-conditioner kits On net to net basis for those cars which are having 1 or 2 of these inputs.

Note: Export product having the following specifications:1) Engine: a) Cylinders(in line)-4 b) Cylinder capacity - More than 1000 & upto 1100 CC. c) Engine torque - 7.20 kg./3000 rpm d) Bhp - 41 hp/4800 rpm e) compression ratio -7.0:1 f) Radiator frontal area - 0.148 sq.m. g) Radiator fan - 4 blades ii) Technical Data:

C212

h) Maximum weight - 1270 kg. i) Length - 3930 mm j) Width - 1460 mm k) Height - 1468mm l) Boot capacity - 0.308 cu.m. m) Fuel tankcapacity - 38 lit. n) 4 speed gear box - Floor shift gear lever o) (4 forward + 1 rev) - Fully syncro forward speeds p) Brakes - Drum brakes on all 4 wheels q) Tyres - Opt.155 SR 14 r) Front suspension - Upper & lower swingingarms, coil springs, double acting hydraulic shock absorbers & anti-roll bar s) Rear Suspension - Semi elliptical leaf springs, double acting hydraulic shock absorbers & anti-roll bar.

C1068 Piston Pin/ Gudgeon Pin 1 kg 1 Non-Alloy/ Alloy Steel Round 1.25 kg

C1069 Deleted.




b) Polyacrylic Rubber Compound 1.10 Kg/kg content in the export product.

2 Composition of the Compound per Kg. :

a) Polyacrylic Rubber 0.59 Kg

2 b) Carbon Black 0.33 Kg

C1070 Polyacrylic Rubber Oil Seals

c) Misc. Chemicals and Rubber Chemicals: Zinc Oxide, Stearic Acid, Antioxidants, Accelerator, Plasticizer, Process Aids, Sulphur, Bonding Agent and Processing Oil

0.05 Kg


1 kg 1 CRCA Sheets/Defectives/Seconds


C1071 Pump Oiler/Oil Cans/Grease Gun/Suction Gun

2 MS Wire Rods 1.06 kg/kg of net content in the export product

C1072 Push rod 1Kg. 1 Non-Alloy/Alloy Steel rounds 1.30 kg

C1073 Radiator Cap 1 kg 1 MS CRCA sheet/ strips/ coils including seconds/ defectives but excluding coated

1.12 kg

1 kg 1 Stainless Steel/Mild Steel Strips 1.35 kg/kg content in export product

C1074 Radiator Cap

2 Cover Cap,Spring Washer Spring, Main Valve, Large Gasket, Tubular Rivet, Retainer,Small Gasket protector River, Medium Gasket, Spring Vaccum Valve

1.02 Nos./No. in export product

1 kg 1 HR Steel Plates/Coils (8 mm to 15 mm)

1.83 kg/kg of Content in the export proudct.

2 Castings (Rough/Machined) OR

On net to net basis.

C1075 Rear Axle Assembly for LCV/HCV (Assembly/SKD)

2 Steel Scrap/Pig Iron 1.36 kg/kg of net content in the case of

C213

rough castings. OR 1.45 kg/kg of net content in the case of machined castings.

3 Forging (Rough/Machined) OR

On net to net basis.

3 Non-Alloy/Alloy Steel Bars/Rods/ Billets/Blooms/ Ingots

1.47 kg/kg of net content in the case of rough forgings OR 1.70 kg/kg of net content in the case of machined forgings.

4 Relevant Bearings. Net to net.

5 Bolts/Nuts/Washers/ Shims/Spacers/Oil Seals/Gaskets

1.05 Nos./No. of Fasteners in the export product.

6 Misc. items and Cuttings Tools, Gear Cuttings Blades, Cutters, Taps, Chasers, Burnishing Tools/ Lapping Compound/Rust Preventives(to be specified)/Lubricants (to be specified)/Dyes/Die Block, Die Steel/Electrods/Welding Wire/Welding Fluxes.

Upto 8% of FOB value of exports..

1 No. 1 Cold Rolled (Prime) Steel Sheets/Strips/Steel Sheets/Strips/Wide Coils

1.20 Kg/Kg content in the export product

2 Hot Rolled (Prime) Steel Sheets/Strips/Wide Coils


3 Aluminium Alloy Ingots 1.07 Kg/Kg content in the export product

4 Seamless Steel Tubes 1.02 Kg/Kg content in the export product

5 Super Enamelled/ Enamelled Copper Wire


6 Natural Rubber 1.05 Kg/Kg content in the export product

7 Plywood 1.05 Sq.Mtr/Sq.Mtr content in the export product

8 Polyol 1.05 Kg/Kg content in the export product

9 Isocynate 1.05 Kg/Kg content in the export product

10 Butyl Rubber 1.05 Kg/Kg content in the export product

11 Relevant Synthetic Rubber (NBR/SBR/PBR)


12 Carbon Black 0.40 Kg



14 Polypropylene Granules 1.05 Kg/Kg content in the export product

15 Paints 1% of FOB value

C1076 Front/Rear Engine Auto Rickshaw in CKD/ SKD/CBU Condition (125 CC to 200 CC)

16 PVC/Artificial Leather Cloth 1.05 Sq.Mtr/Sq.Mtr content in the export product

C214

17 Nylon Granules 1.05 Kg/Kg content in the export product

18 Main Shaft Assembly Net to net

19 Crank Shaft Assembly Net to net

20 Relevant set of gears - 1 set each Net to net


22 Rear Shock Absorber set Net to net.




26 Relevant Set of Bearings 1 - Set Net to net.



29 Rear View Mirror Set Net to net.

30 Wiring Harness set Net to net.


32 Rear Suspension Spring (1 Set = 2 Nos.)

Net to net.



35 Auto Switches Set Net to net.

36 Rotor Net to net.

37 Starting Tube Net to net.

38 Automotive lights with bulbs -1 set.

Net to net.

39 Clutch Bush Net to net.

40 Wheel Axle Assembly Net to net.

41 Magnet container assembly/Rotor Net to net.

42 Lock Assembly Net to net.

43 Set of Gears Net to net.


45 Petrol Lock Complete Net to net.

46 Horn Net to net.

47 Tool Kit Complete Net to net.

48 Needle Bush (1 Set = 3 Nos.) Net to net.

49 Silicon Diode Assembly Net to net.


51 Differential Assembly Net to net.

52 Pivot Pin Assembly Net to net.


54 Starter Gear Net to net.

55 Front Brake Drum Assembly Net to net.

56 Wiper Motor Net to net.

57 Rear Wheel Axle Assembly Net to net.

C215

58 Wiper Assembly Net to net.

59 Complete clutch control shaft Net to net.

60 Lever Sector Complete Net to net.


62 Slider and slider block Net to net.

63 Propeller Shaft Assembly Net to net.

64 Trailing Arm Assembly Right & Left (1 Set = 2 Nos.)

Net to net.

65 Side Glass (1 Set = 2 Nos.) Net to net.

66 Manifold Net to net.

67 Coir (1 Set = 2 Nos.) Net to net.

68 Hydraulic Brake Assembly Net to net.

69 Windshield Net to net.

70 Starter Motor - 1 No. Net to net.

71 Cylinder Head Casting - 1 No. Net to net.

72 Flexible Coupling/ Flange - 2 Nos.

Net to net.

73 Valve Set - 1 No. Net to net.

74 Hub (set of 2) - 1 Set Net to net.

75 Reverse Motion Shaft - 1 No. Net to net.

76 Set of rings -1 Set Net to net.

77 Set of Seals - 1 Set Net to net.

78 Cones - 2 Nos. Net to net.

79 Starting Ring Gear - 1 No. Net to net.

80 Rod Control Lever Sub-Assy- 1 No.

Net to net.

81 Lever Group for Max Controlling -1 No.

Net to net.

82 Regulating Lever Assly - 1 No. Net to net.

83 Lever GR Stop Control - 1 No. Net to net.

84 Spark Advance Regulator Assly - 1 No.

Net to net.

85 Clutch Gears Cross - 1 No. Net to net.

86 Set of Spacers - 1 Set Net to net.

87 Valve for Piston cooling - 1 No. Net to net.

88 Screw - 1 No. Net to net.

89 Oil Plug Assly -1 No. Net to net.

90 Anti Vibration Mounts - 3 Nos. Net to net.

91 Cross -1 No. Net to net.

92 Catalytic Converter - 1 No. Net to net.

93 CNG Cylinder - 1 No. Net to net.

94 CNG/ LPG Kit (Excluding Cylinder) - 1 Set.

Net to net.

95 Tyre (Set of 4 nos.)- 1 Set Net to net.

96 Crankcase - 1 No. Net to net.

C216

97 Crankcase cover - 1 No. Net to net.

98 Isolator Vibration - 3 No. Net to net.

99 Fan Cowl - 1 No. Net to net.

C1077 Hose Assembly having different lengths

1 Mtr 1 Hydraulic Break Hose of relevant dia and material

1.02 Meter/Meter content of export product

C1078 Rocker Arm/ Rocker Shaft

1 kg 1 Steel Bar/Rods of Relevant Grade.

1.39 kg

C1079 Roller for auto break shoe



1 kg 1 Copper Electrolytic Grade Standard Wire/Bar/Rod


2 C.R. Steel Sheet Extra Deep Drawing Quality 0.8 mm to 1 mm thick


3 Steel Rod Free Cutting ENIA/SAE 8620 or equivalent to 5 to 36 mm Dia

Value Limited to 1% of FOB value of exports

4 Solder Tin 60% to 80% Lead 40%-20%

C1080 Rotor for Altemotor

5 Poloyester Sheet/Strip/Film 25 to 200 Micron Thick


1 No. 1 CRCA Steel Sheets/Strips/Coils. 1.30 kg/kg content in the export product.

2 Terne/Zinc Coated Steel sheets/strips/coils


3 Hot Rolled Steel Sheets/Strips/Coils


4 Seamless Carbon/Alloy Steel Tubes OR


Steering Column Assembly 1 No.

5 Aluminium Alloy Ingots 1.10 kg/kg content in the export product.



7 Natural Rubber 1.05 kg/kg content in the export product.

8 Polyol 1.05 kg/kg content in the export product.

9 Isocyanate 1.05 kg/kg content in the export product.

10 Butyl Rubber 1.05 kg/kg content in the export product.

11 Relevant Synthetic Rubber (NBR/ PBR/ SBR)


12 Carbon Black 0.1007 gm

13 Nylon Granules 1.05 kg/kg content in the export product.

14 ABS Plastic Granules 1.05 kg/kg content in the export product.

15 Polypropylene Granules 1.05 kg/kg content in the export product.

C1081 Above 100 CC and upto 175 CC Scooter in CKD/SKD/ CBU Condition

16 Polyvinyl Chloride (PVC) 1.05 kg/kg content in

C217

Granules the export product.

17 PVC/PU Leather Cloth 1.05 kg/kg content in the export product.

18 Paints 1.20 Ltr.

19 Polycarbonate Moulding Powder 700.00 gm

20 Primer 1.00 Ltr.

21 Clear Acrylic (Lacquer) 0.83 Ltr.

22 1 K Primer 0.40 Ltr.

23 Clear 1K/2K (Lacquer) 0.40 Ltr.

24 Desmodur-PA 50/Suprasec 2082 100.00 gm

25 Auto Lamps & Bulbs Net to net.

26 Auto Lubricating System (Mix Gear Asly.)

Net to net.


28 Bearing Set Net to net.

29 Belt Drive Net to net.

30 Brake Drums Net to net.

31 Brake Hose Asly. Net to net.

32 Brake Shoe Set Net to net.

33 Bush Net to net.

34 Carburetor Assembly Net to net.


36 Clutch Asly Net to net.

37 Control Cable Assembly Net to net.

38 Crankshaft Assembly Net to net.

39 Cross Net to net.


41 Disc Brake & Caliper Asly. Net to net.

42 Drive/Mainshaft Assembly Net to net.

43 Electronic Components (Thyristors,Terminals, Capacitor, Diodes, Traicm Resistors Scr.

Net to net.

44 Front/Rear Blinker Net to net.

45 Front Brake Lever Net to net.

46 Gasket Set Net to net.

47 Gear Shifter Asly Net to net.

48 Hand Grips Net to net.

49 Horn Net to net.

50 Ignition Coil Net to net.

51 Inner Movement Assembly/Speedo meter Complete

Net to net.

52 Lock & Key Set Net to net.

53 Magneto Net to net.

54 Master Cyl Asly Net to net.

C218

55 Mirrors Net to net.

56 Module for Buzzer Net to net.

57 Needle Bearing Set Net to net.

58 Petrol Cock Net to net.

59 Pin, Socket Double Lance Type Net to net.

60 Pinion with free Wheel Net to net.

61 Piston Asly (Piston, Rings, Pin, Circlip)

Net to net.

62 Regulator, Flasher, Beeper, Etc. Net to net.

63 Reinforcement Plate Net to net.

64 Selector Spider Net to net.

65 Set of Gears Net to net.

66 Set of Oil Seal Net to net.

67 Shaft for Free Wheel Net to net.

68 Shock Absorber Net to net.

69 Single Gear Control System Net to net.



72 Stickers and Labels Net to net.

73 Switches Net to net.

74 Tensioner Asly Net to net.


76 Tyres Net to net.

77 Valve Air Control Net to net.

78 Windshield Beading Net to net.


80 Hot Dies Steel Blocks, High Speed Steel, Inserts, Cutting, Tools, Grinding Stones, Adhesives and Sealants, Steel Shots.


1 kg 1 Resin 0.17 kg

2 Asbestos Raw in different grades 0.20 kg

3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber, Copper Powder, Bonding Adhesive


C1082 Semi Metallic Asbestos Disc Brake Pads



1 No (Net wt of Pump - minimum 40.5 kgs)


10.7kg C1083 Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing & upper casing. 2 Pig Iron 0.3 kg

C219

3 Nitrile Rubber 0.783 kg


0.68 kg

5 Zinc 0.9 kg

6 PVC Resins 23.98 kg

7 Stabilizer for PVC 0.816 kg

8 Flow Promoter 1.011 kg

9 Impact Modifier 1.011 kg

10 Filler (Calcium Carbonate) 1.011 kg

11 Colouring Pigments 0.004 kg

12 Titanium Dioxide 0.884 Kg

13 Cycle Hexamon/MIBK 0.78 Kg

Note : 1. Quantity of different items in item No. 6 to 13 is for 29 Kgs of PVC Compound. In case of higher content of Plastics in the pumps, the weight of different items covered by these Sl. No. may be worked out on pro-rata basis.

1 kg. 1 CRCA Coil/ Sheet 1.110 kg

2 M.S. Wire Rod 0.022 kg

3 M.S. Round 0.154 kg

C1084 Silencer PGT Black BCP (Partially Black Painted & Nickel Plated

4 Nickel 0.026 kg




b) Silicon Rubber Compound 1.10 Kg/kg content in the export product.

2 Composition of the Nitrile Rubber Compound per Kg. :

a) Silicon rubber 0.958 Kg

b) Red Colour Pigment 0.01 Kg

c) Orange Colour Pigment 0.0038 Kg

d) Red Iron Oxide 0.022 Kg

C1085 Silicon Rubber Oil Seals

e) Varpx 0.0043 Kg

1 Kg 1 Copper Mill Scale Min. 80% Copper in Natural State OR

1.276 kg

1 Copper Powder Electrolytic/Atomised

0.96 kg

2 Tin Ingot Min. 98% Purity OR

0.0944 kg

2 Tin Powder 0.093 kg


4 Lubricating Oil 0.0403 kg

C1086 Sintered Bronze Bushes & Parts 'SB' Grade

5 Misc. Items: Graphite Powder, Jig Grinnding Wheels and Honing Stones

CIF value shall not exceed Rs. 3.70 per kg of product exported

C1087 Sintered Bronze Bushes and Parts `D' Grade


0.9183 kg

C220


0.6914 kg

2 Tin Ingot Min. 98% Purity OR

0.0552 kg



4 Iron Powder Sponge/Atomised 0.3084 kg


6 Misc. items: Jig Grinding Wheels and Honing Stones

Value not to exceed Rs. 2.43/kg of exported product


0.084 kg

1 Copper Electrolytic/Atomised 0.0638 kg


3 Solid Lubricant powder 0.0106 kg


C1088 Sintered Iron Bushes & Parts Category IC

5 Misc. items: Ferro Phosphorous Powder/Manganese Sulphide Powder/Graphite Powder, Jig Grinnding Wheels and Honing Stones

CIF value shall not exceed Rs. 4.40 per kg of product export


0.1975 kg


0.1507 kg




C1089 Sintered Iron Bushes & Parts Category ID

5 Misc. Items: Natural Graphite Powder /Tin Powder, Jig Grinnding Wheels and Honing Stones


1 Kg 1 Iron Powder Sponge/Atomised 1.041 kg



C1090 Sintered Iron Bushes and Parts Category - IA

4 Misc. items: Copper Mill Scale/Copper Powder/Ferro Phosphorous Powder/Manganese Sulphide Powder, Jig Grinnding Wheels and Honing Stones



0.042 kg


0.0319 kg




C1091 Sintered Iron Bushes and Parts Category IB

5 Misc. items: Ferro Phosphorous/Manganese

CIF value shall not exceed Rs. 4.00 per

C221

Sulphide Powder/Natural Graphite Powder, Jig Grinnding Wheels and Honing Stones

kg of product exported

C1092 Sleeve Shaft and Ball Joint

1Kg. 1 Non-Alloy Steel Round/ Billets 1.10 kg/Kg content in the export product.

C1093 Slip Ring 1 No 1 Copper electrolytic grade standard wire/ bar/ rod

0.04 Kg

C1094 Slip Stub Shaft 1.Kg. 1 Non-Alloy Steel Round/ Billets 1.500 kg


0.42 Kg


0.9 Kg


0.45 Kg


C1095 Solenoid Switch Pre-engaged type


0.03 Kg


0.1 Kg


0.25 Kg


0.07 Kg

4 Solder Tin - 80 % Lead - 20 % 0.01 Kg

C1096 Solenoid Swtich Co-axial type


0.02 Kg

C1097 Spindles 1Kg. 1 Non-Alloy/ Alloy steel rounds 1.47 kg

C1098 Spline Hub for Clutch Plates

1 kg 1 Alloy Steel Bars 1.80 Kg/Kg content in export product

1Kg. 1 Medium Carbon steel wire rod/ MS wire rod


C1099 Spokes (Galvanised)

2 Zinc 0.05 kg/ kg wt of the spokes to be galvanised

1 kg. 1 CRCA Coil/ Sheet 1.43 kg C1100 Sprocket

2 Nickel 0.0086 kg

1Kg. 1 M S Plate 1.80 kg/Kg content in the export product.

C1101 Sprocket with central axle

2 Non-Alloy Steel Round/ Billets 1.150 kg/Kg content in the export product.

C1102 Stainless Steel Front Centre Cap - (Automobile) 1 Set Comprising of: a)Front Hub Cover - 2 No. b)Retainer Rings - 1 No. c)Hexagonal Caps - 16 Nos.

1 kg 1 Stainless Steel Sheets/Coils 304 Grade 0.63 mm Thickness

2.275 kg

C1103 Stainless Steel Front Wheel Cover (Automobile)


2.015 kg

C1104 Stainless Steel Rear 1 kg 1 Stainless Steel Sheets/Coils 304 Grade 0.63 mm Thickness

2.077 kg

C222

Centre Cap -(Automobile) 1 Set comprising of: a)Rear Hub Cover -2 No. b)Retainer Rings -2 No. c)Hexagonal Caps -16 No.

C1105 Stainless Steel Rear Wheel Cover (Automobile)


1.75 kg


0.8 Kg


3.5 Kg


1.5 Kg

4 Solder Tin - 80 % Lead - 20 % 0.02 Kg

C1106 Starter Motor Armature for Low Speed Vehicles


0.04 Kg


3.3 Kg


13 Kg


2.1 Kg

4 Solder Tin - 80 % Lead - 20 % RC 16 SWG

0.03 Kg


C1107 Starter motor with maximum current 1100 Amps


0.06 Kg


2.5 Kg


10 Kg


2.1 Kg

4 Solder Tin - 80 % Lead - 20 % RC 16 SWG

0.03 Kg


C1108 Starter motor with maximum current 800 Amps


0.06 Kg


0.44 Kg


2 Kg


C1109 Stator for alternator for Light Duty (12 Volts 60-95 Amps)


0.02 Kg

1 set 1 Copper Rod/Winding Wire or Copper Wire Bar

28.5 Kgs

2 Bronze Metal 9.3 Kgs

3 CI Castings OR

51.6 Kgs

3 Pig Iron 67.1 Kg

C1110 Submersible Water pump sets comprising of Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes (Capacity from 30 to 90

4 Stampings 88 Kg

C223

OR

4 CRNGO Steel Sheet/Coil/Strips 157 Kg

5 ERWSS Tube/Rods-Grade AISI 304/316/431

60 Kgs.

HP) (Minimum export product weight not less than 237.4 Kgs.)

6 Relevant Rubber/Plastic Parts Net to Net

1 set 1 Cooper Rod/Winding Wire or Cooper Wire Bar

14.4 Kgs

2 Bronze Metal 4.5 Kgs

3 CI Castings or Pig Iron 31.6 Kgs. 41.1 Kg.

4 Stamping or CRNGO Steel Sheet/Coil/Strips

28 Kgs. 50 Kgs

5 ERWSS Tube/Rods - Grade AISI 304/316/431

21.0 Kgs.

C1111 Submersible water pump sets comprising of Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes (capacity from 7.5 to 30 HP) (Minimum export product weight not less than 99.5 Kgs.)

6 Relevant Rubber/Plastics Parts Net to Net

1 Set. 1 Copper Rod/Winding wire OR Copper Wire Bar

5.1 Kg

2 Bronze Metal 1.5 Kg

3 Pig Iron 34 Kg

4 CRNGO Steel Sheet/Coil/Strip 31 Kg

5 ERWSS Tube/Rods Grade AISI 304/316/431

14 Kg

6 Rubber/Plastic Parts OR

Net to Net

6 a) Synthetic Rubber 1.05 Kg/Kg content in export

b) LDPE Moulding Powder 1.05 Kg/Kg content in export

c) HDPE Moulding Powder 1.05 Kg/Kg content in export

d) PP Moulding Powder 1.05 Kg/Kg content in export

C1112 Submersible Water Pumps Set comprising of Motors, Pumpsets & Accessories thereof such as cable, control penals & pipes (capacity upto 7.5 HP)

e) ABS Moulding Powder 1.05 Kg/Kg content in export

100 kgs 1 CR Steel Strips 89.01 kgs.

2 Lead 47.57 kgs.

3 Tin Ingots/Scraps 6.33 kgs.

C1113 Thinwalled Engine Bearing Bushings and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/ SAE-14

4 Antimony Ingots/Scraps 9.50 kgs.

100 kgs 1 CR Steel Strips 114 kgs.

2 Copper Wire Bars/ Cathodes/ Ingots/ Rods/ Scrap

0.15 kg.

3 Lead 0.40 kg

4 Tin Ingots/Scraps 2.59 kg.

5 Aluminium Ingots/Sheets/Foils/Scraps

17.79 kgs.

6 Antimony Ingots/Scraps 0.07 kg.

C1114 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel Backed Aluminium Tin Alloy GA-17G/A-17X

7 Silicon 0.54 kg.

C1115 Thinwalled Engine Bearings Bushigs and Thrust Washers in Steel

100 kgs 1 Steel backed Copper-Lead Strips generally conforming to KS-30/F-14/SAE-48/SL

138.33 kgs.

C224

backed Copper based Alloy GS-30/KS-30/ F-14/SAE-48/SL

100 kgs 1 CR Steel Strips 82.65 kgs.

2 Lead 47.57 kgs.

3 Tin Ingots/Scraps 0.56 kg.

C1116 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/ F-23/L-200/G-24/SAE-15

4 Antimony Ingots/Scraps 8.15 kgs.

C1117 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Copper based Alloy GS- 10/LS-10/ G-46/SAE-797/SY/F-100/F-59

100 kgs 1 Steel backed Copper-Lead Strips generally conforming to LS-10/G-46/SAE-797/SY/F-100/F-5

142.14 kgs.

C1118 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Copper Lead Alloy of GS- 23 /LS-23/G-48/SAE-799/SX/F-250/F-7

100 kgs 1 Steel backed Copper-Lead Strips generally conforming to LS-23/G-48/SAE-799/SX/F-250/F-7

141.95 kgs.

C1119 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE-49/SP

100 kgs 1 Steel backed Copper-Lead Strips generally conforming to KS-25/SAE-49/SP

139.13 kgs.

100 kgs 1 C.R. Steel Strips 92.39 kg


36.76 kgs

3 Lead 14.00 kgs

C1120 Thinwalled Engine Bearings, Bushing and Thrust washers in Steel backed Copper based Alloy F-770/SL/KS30/GS30/F-14 4 Tin Ingots/Scraps 0.20 kgs

100 kgs 1 C.R. Steel Strip 97.50 kgs C1121 Thinwalled Engine Bearings, Bushing and Thrust Washers in Steel Backed Copper base Alloy SL/KS 30/GS 30/F-14/SAE 48/SP/ KS 25/GS 25/G 41/F 770-780/H 24/F 112/SAE 49/SY/F 100/HF 2/LS 10/GS 10/G 46/SAE 797/SX/F 250/HF 16 OR H 116/LS 23/GS 23/G 48/SAE 799

2 Copper Lead Alloy Atomised Powder Generally conforming to SL/KS 30/GS 30/F-14/SAE 48/SP/KS 25/GS 25/G 41/F 770-780/H 24/F 112/SAE 49/SY/F 100/HF 2/LS 10/GS 10/G 46/SAE 797/SX/F 250/HF 16 or H 116/LS 23/GS 23/G48/SAE 799

50.80 kgs

100 kgs 1 C.R. Steel Strip 134.03 kgs C1122 Thinwalled Engine Bearings, Bushing and Thrust Washers in Steel Backed Aluminium Base Alloy F-820/ or F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA

2 Aluminium Tin Based Clad Alloy to F-820/or F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A 6/GA 6/A 300/G 73/SAE 770-780

23.29 kgs

C225

17G/A 17X/A 6/GA 6/A 300/G 73/SAE 770-780

C1123 Thinwalled Engine Bearings, Bushing and Thrust Washers in Steel Backed Aluminium Tin Base Alloy GA 6/ A 6/G 73/A 300/ SAE 770/AS 11

100 kgs 1 Steel Backed Aluminium Tin Bimetal Strips to GA 6/A 6/G 73/A 300/SAE 770/AS 11

148.09 kgs



38.14 kgs

3 Lead 12.42 kgs

C1124 Thinwalled Engine Bearings, Bushings and thrust Washers in Steel backed Copper based High Tin Alloy F-780/SP/H24/GS25/KS25/G-41/SAE-49

4 Tin Ingots/Scraps 0.77 kgs



39.83 kgs

3 Lead 4.98 kgs

C1125 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Copper based Alloy F-100/SY/HF2/LS10/GS10/Glyco-46/SAE-792




37.77 kgs

3 Lead 11.53 kgs

C1126 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Copper based Alloy F-250/SX/HF 16 OR H 116/LS-23/GS-23/Glyco-48/SAE-799




0.23 kgs


C1127 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Based Alloy AS-15/F-820/F-157/GA-20/A-20/G-74/TR-20/SAE-783

4 Aluminium Ingots/Sheets/ Foils/Scraps

17.77 kgs


2 Copper Wire Bars/ Cathodes/ Ingots/ Rods/ Scrap

0.20 kgs


4 Aluminium Ingots/ Sheets/Foils/Scraps

18.28 kgs

C1128 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Based Alloy AS-11/GA-6/A-6/G-73/A-300/SAE-770

5 Nickel Bars & Rods 0.20 kgs


2 Copper Wire Bars/Cathodes/Ingots/ Rods/Scrap

1.73 kgs


C1129 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Tin Based White Metal Alloy L-2/GL-12/W-90/G-32/B-100/SAE-12

4 Antimony Ingots/Scraps 3.95 kgs

100 kgs 1 C.R. Steel Strips 87.39 kg C1130 Thinwalled engine Bearings, Bushings and 2 Lead 45.66 kgs

C226

3 Tin Ingots/Scraps 3.26 kgs thrust washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L-100/F-99/SAE-13

4 Antimony Ingots/Scraps 5.44 kgs

C1131 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR-20/GA-20/A-20/G-74/SAE-783/AS-15/GA-17G/A-17X

100 kgs 1 Steel backed Aluminium Tin Strips to F-820 OR F-157/ TR-20/GA-20/A-20/G-74/SAE-783/AS-15/GA-17G/A-17X

142.73 kgs

C1132 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Tin Alloy AL-6

100 kgs 1 Steel Backed Aluminium Tin Strips to AL-6

140.96 kgs

C1133 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Lead Alloy F-66/AL-6M

100 kgs 1 Steel Backed Aluminium Lead Strips To F-66/AL-6M

141.49 kgs

C1134 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Tin Based Babbit Alloy to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2

100 kgs 1 Steel Backed Tin Based Babbit Alloy Strips to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2

133.29 kgs

C1135 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Lead based Babbit Alloy to F-23/L 200/GL-13/L-100/F-99/SAE-13/GM-155

100 kgs 1 Steel Backed Lead Based Babbit Alloy Strips to F-23/L 200/GL-13/L-100/F-99/SAE-13/GM-155

146.47 kgs

C1136 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Cast Copper based Alloy to F-112/F-77/F-770/G-41

100 kgs 1 Steel backed Cast Copper Lead Strip to F-112/F-77/F-770/G-41

152.17 kgs

1 kg 1 For Tommy Bar: Non Alloy Steel Rounds/Bars/Rods


2 For Top Link Replacement End: Non Alloy Steel Rounds/Bars/Rods


3 For Replacement Ball: Non Alloy Steel Rounds/Bars/Rods

3 kg/kg content in the export product

C1137 Top Link Assembly for Tractors (consisting of Tommy Bar, Replacement Ball, Replacement End, Centre Tube and Locking Collar)-Galvanised

4 For Centre Tube: Seamless Non Alloy Steel Tubes


C227

5 For Locking Collar: HR Sheets


6 Zinc for Electroplating 0.010 kg/kg of Steel content in the export product

7 Misc Items: Die Steel, Cutting Tools, Taps & Drills, Lubricants

Limited to 4% of FOB value of exports.

1 No. 1 HR Steel Sheet, HR Steel Plates, Bright Bar


2 Lining, Shoe Hold Downpin, Ancher Pin Steady Post HT Nuts Grommet

Net to net.

3 Spring Steel Wire 1 kg/kg content in export product.

C1138 Tractor Brake Assembly

4 Shoe Dip Bending Adhesive Tri- chloroethylene


1 No. 1 Seamless Steel Tube 1.15 kg/kg content in export product.

2 Non-alloy steel Rounds 1.72 kg/kg content in export product.

3 H.R. Sheet 2.13 kg/kg content in export product.

4 Spring Wire 1.14 kg/kg content in export product.

5 CRCA Sheet 2.5 kg/kg content in export product.

6 Non Alloy Steel/Wire Rod 1.17 kg/kg content in export product.

C1139 Tractor Parts - Ratchet Jack Assembly

7 Misc. Items: Die Steel, Cutting Tools, Drills, Grinding Wheels, Carbide Die, Reams, Machine Blades and Welding Wire


100 Nos 1 Roller Bearings 200 Nos.

2 Taper Bearings/ Taper Roller Bearings

400 Nos.

3 SHIM 570 Nos.

4 Spring 200 Nos.

5 Glyd Ring (Teflon Ring) 100 Nos.

6 Valve MPCV 100 Nos.

7 Screw 100 Nos.

8 Cartridge 100 Nos.

9 Shaft Seal 100 Nos.

10 Sight Glass 100 Nos.

11 Black Ball 60 Nos.

12 Valve BD 100 Nos.

13 White Ball 42 Nos.

14 Separator Element 100 Nos.

15 Rotor Set 100 Nos.

16 Oil Filter Elbow 100 Nos.

C1140 Unibody Compressors (Oil Injected Rotary Screw Compressors suitable to drive with V-Belts and Electric Motors, Oil Engine and any other suitable drive)

17 Non Asbestos Gasket sheet of size 1/32, 1/64" and 1/16"

117.65 kg

C228

1 No 1 Needles Net to net

2 Seals 4 Nos

C1141 Universal Joint for Automobiles

3 Plastic Inserts 4 Nos

1 kg. 1 CRCA Sheet/ Coils 1.40 kg C1142 V-Belt Cover BcP

2 Nickel 0.009 kg

1 No. 1 Case Moulding 1 No.

2 Screw Terminal 1 No.

3 Primary Bobbin 1 No.

4 Irradiation Cable (Black/Ziba) 0.1 Meter

5 Irradiation Cable (Black/White) 0.12 Meter

6 Male Terminal 1 No.

7 Terminal 1 No.

8 Sumi Tube 0.02 Meter

9 Rubber Tube 2 Nos.

10 Z. Sleeve 1 No.

11 Core Assembly 1 No.

C1143 Vaccum Potted Ignition Coil other than those covered by Sl. Nos. 1049 & 1050

12 Copper Wire 15 MEW(0.45 mm) 0.05 kg

C1144 Valve Tappets 1Kg. 1 Non-Alloy/ Alloy Steel rounds 1.30 kg

1 No 1 CR Steel Sheet Extra deep drawing

0.5 Kg

2 Steel rod free cutting ENIA/SAE 8620 or equivalent 5-35mm dia

0.1 Kg

3 Solder, Tin - 80%, Lead - 20% 0.005 Kg

C1145 Voltage Regulator

4 Contact Point-tungsten 6 Nos

1 kg. 1 CRCA Coil/ Sheet 1.035 kg

2 H.R. Coil/ Sheet 0.219 kg

3 M.S. Round 0.348 kg

4 M.S. Wire Rod 0.017 kg

C1146 Wheel Pulley MB with ZP Lever(Lever plated with Zinc and wheel Pulley Painted)

5 Zinc 0.0064 kg

1 MT 1 Magnesium 12.5 kgs

2 Silicon 4.7 kg

3 Caustic Soda (100% Basis) 128.4 kgs

4 Calcined Petroleum Coke 399.8 kgs

5 C.T. Pitch 104.4 kgs

C1147 Aluminium Alloy Billet (6063)

6 Aluminium Flouride 20.2 kgs

1 kg 1 Aluminium Scrap 0.894 Kgs

2 Nickel coated (Unwrought) 0.0105 kgs

3 Silicon metal 0.1205 kgs

C1148 Aluminium Alloy Ingot (IM-2)

4 Zinc 0.0125 kgs

1 MT 1 Aluminium Ingots 1.10 MT C1149 Aluminium Forgings

2 Misc. Items: Cutting Tool, Grinding Wheels, Furnace Oil, Anti- rust Oil

Upto 4% of FOB value of export product.

C1150 Aluminium Ingots / 1 MT 1 Caustic Soda Lye (Containing minimum 47% Caustic soda with

348.94 kg

C229

Sodium content 164 kg.) OR

Alumina Calcined 1920 kg

2 Pre-baked anode OR Raw material for pre baked anode

442.44 kg

a) Calcined Petroleum Coke 451 kg with 1% wastage

b) Coal Tar Pitch 110 kg (inclusive of 1% wastage)

3 Aluminium Fluoride 20.77 kg

4 Furnace Oil (for baking) 90 L

Aluminium Sow Ingots

5 Non-coking Coal 11.73 MT

C1151 Deleted

1 MT 1 Caustic Soda Lye (containing min. 47% caustic soda)

348.94 kgs (Total Soda content 164 kgs)

2 Calcined Petroleum Coke (CP coke)

0.46 MT

3 Coal Tar Pitch 0.11 MT

C1152 Aluminium Wire Bar/ Rod

4 Aluminium Fluoride 20.7 kgs

C1153 Antimonial Lead Alloy/Lead Calcium Alloy/Lead based Alloy (Minimum Lead content 98%)

1 MT 1 Lead BatteryPlates covered by ISRI Code word "Rails"

1.587 MT

C1154 Deleted

C1155 Deleted

C1156 Deleted

C1157 Deleted

100 kgs 1 Steel Strips 77.00 kgs


23.13 kgs

3 Lead 7.96 kgs

C1158 Bimetal Strips in Steel backed Copper based generally conforming to F 770/SP/ SAE 49/GS 25/KS 25/F 780/H 24/G 41/F 112 4 Tin Ingots/Scraps 0.32 kg



28.73 kgs

3 Lead 3.58 kgs

C1159 Bimetal Strips in Steel backed Copper based generally conforming to F 100/SY/ SAE 797/GS 10/LS 10/G 46/HF 2

4 Tin Ingots/Scraps 3.58 kg


2 Copper Wire/Bars/Cathodes/Ingots/Rods/Scrap

25.84 kgs

3 Lead 7.90 kgs

C1160 Bimetal Strips in Steel backed Copper based generally conforming to F 250/SX/ SAE 799/GS 23/KS 23/HF 16/H 116/ G 48 4 Tin Ingots/Scraps 1.28 kg

100 kgs 1 Steel Strips 77.14 kgs C1161 Bimetal Strips in Steel backed Copper based 2 Copper Wire 25.06 kgs

C230

Bars/Cathodes/Ingots/Rods/Scrap

3 Lead 7.71 kgs

generally conforming to F 780




35.22 kg

3 Lead 3.20 kgs

C1162 Bimetal Strips in Steel backed Copper based generally conforming to F 80/SAE 789




21.90 kgs

3 Lead 9.68 kgs

C1163 Bimetal Strips in Steel backed Copper based generally conforming to SL/SAE 48/ KS 30/GS 30/F 14


100 kgs 1 Steel Strips 75.36 kgs C1164 Bimetal Strips in Steel backed Copper based generally conforming to SY/SAE 797/SX/SAE 48/GS 10/LS 10/ F 100/G 46/HF 2/ GS 25/KS 25/F 112/G 41/H 24/F 770/F 780/GS 23/LS 23/ F250/ G 48/H 116/HF 16/GS 30/KS 30/F 14/SAE 799/SP/SAE 49/SL

2 Copper Based Alloy Powder to SY/SAE 797/SX/SAE 48/GS 10/LS 10/F 100/G 46/HF 2/GS 25/KS 25/F 112/G 41/H 24/F 770/F 780/GS 23/KS 23//F 250/G 48/H 116/HF 16/GS 30/KS 30/F 14/SAE 799/SP/SAE 49/SL

31.25 Kgs

1 Kg 1 Zinc 1.10 Kg. per kg. content in export product

C1165 Brass Blanks (Discs)/ Brass case Blanks(Discs) for Defence application

2 Copper Wire bars/Cathodes/Ingots/Rods

1.10 Kg. per kg. content in export product

C1166 Brass extruded Hollow sections such as pipes/ tubes

1 kg. 1 Brass scrap OR Brass Ingots/Billets.

1.08 Kg 1.02 Kg.

C1167 Brass extruded solid sections including Bars and Rods

1 kg 1 Brass scrap OR Brass Ingots/Billets.

1.08 kg 1.02Kg.

1 kg 1 Copper Cathode/Ingots OR


1 a) Copper Scrap 1.075 kg/kg content in the export product.

C1168 Brass Foil

2 Zinc Ingot 1.05 kg/kg content in the export product.

C1169 Brass strips/ Sheets 1 kg 1 Brass Scrap 1.07 kg

1 kg 1 Copper Wire Bar/Cathode/Ingot/Rod or Copper Scrap

1.05 kg/kg content in export OR 1.075Kg/Kg content in the export product.

C1170 Brass Strips/Sheets

2 Zinc Ingots 1.05 kg/kg content in export

C1171 Brass Washers of all 1 kg 1 Brass scrap 1.100 kg

C231

types

1 kg. 1 a) Copper Wire Bar/Cathode 1.05 kg/kg content in export

C1172 Brass Wire

b) Zing Ingot OR Brass Scrap of relevant grade.

1.05 kg/kg content in export OR 1.08 kg/kg content in export

C1173 Brass Wood Screw 1 Kg. 1 Brass Scrap 1.10 Kg/Kg content of Brass in export product

1 MT 1 Caustic Soda lye (containing min. 47% Caustic Soda)

174.47 kgs in lye form with 47% Caustic content (82 kgs on 100% basis)

2 Furnace oil 246 kgs

3 Synthetic Flocculant 230 gms

C1174 Calcined Alumina

4 Crystal growth modifier 262 gms

1 Kg 1 Copper tubes Refrigeration quality-Dia 1/4" to 1/2"


2 Aluminium Fin Stock thickness 0.10 mm to 0.20 mm


3 Brazing materials Upto 0.5% of FOB value

C1175 Condensor/ Evaporator Coils used as Heat exchangers for Airconditioning and Refrigerator purpose.

4 U Bends and Tripods Net to Net

1 kg 1 Copper scrap OR


1 Copper Cathode/Copper Wire Bars OR Copper Billets


2 Alloying Elements viz. Zinc, Lead, Tin, Nickel, Aluminium etc.


3 Calcium Hexa Bromide/Calcium Bromide

4 Hot Die Steel

5 Lubricants

6 Tungsten Carbide Drawing Dies & Plugs

C1176 Copper & Copper Alloy (including Brasses, Bronzes, Cupro Nickel, Nickel Silver) Extruded and Drawn Hollow Sections such as Pipes & Tubes.

7 Refractory Ramming Mass

CIF value of the above mentioned item No. 3 to 7 is limited to 1.5% of FOB value of export.

1 kg 1 Copper Scrap OR

1.07 kg

Copper Cathodes/Copper Wire Bars

1.05 kg

2 Alloying Element/s viz. Zinc, Lead, Tin, Nickel, Aluminium etc.

1.05 kg

3 Calcium Hexa Bromide / Calcium Bromide

CIF value limited to 1.5% of FOB value of export.

C1177 Copper & Copper Alloy(including Brasses, Bronzes, Cupro Nickel, Nickel Silver) Extruded and Drawn Solid Sections

4 Hot Die Steel CIF value limited to 1.5% of FOB value of export.

C232

5 Lubricants CIF value limited to 1.5% of FOB value of export.

6 Tungsten Carbide Drawing Dies & Plugs

CIF value limited to 1.5% of FOB value of export.

7 Refractory Ramming Mass CIF value limited to 1.5% of FOB value of export.

100 kgs 1 Copper Wire Bars/Cathodes/Ingots/Rods/Scrap

83.527 kgs

2 Lead 10.441 kgs

C1178 Copper Based Pre-alloyed Powders to R-100/PMB-20/SY/ HF2/LS10/GS10/ SAE-797/G-46/KS940.



77.377 kgs

2 Lead 23.859 kgs

C1179 Copper Based Pre-alloyed Powders to R-250/PMB-21/SX/ H-24/KS-25/GS-25/ SAE-799 HF-16/ KS-23/GS-23/G-48/ KS941-1



74.541 kgs

2 Lead 30.026 kgs

C1180 Copper Based Pre-alloyed Powders to R-730/PMB-30/ SL/KS-30/GS-30/ SAE-48 3 Tin Ingots/Scraps 0.262 kgs


77.315 kgs

2 Lead 25.069 kgs

C1181 Copper Based Pre-alloyed Powders to R-770/R-780/ PMB-26/SP/H-24/ KS25/GS-25/ SAE-49/G-41



58.115 kgs

2 Lead 43.979 kgs

C1182 Copper Based Pre-alloyed Powders to SAE-484/PMB-42


1 kg 1 MS Bright Bars 1.100 kg C1183 Copper Bonded Grounding Rods 2 Copper Bar Cathodes 0.050 kg

C1184 Copper extruded solid sections/Copper Rods

1 kg 1 Copper Cathode/ Ingot OR Copper Scrap

1.02 kg 1.08 Kg

1 kg 1 Copper Wire Bar/ Copper Ingot/Copper Rod/Copper Cathode OR

1.02 kg C1185 Copper Flats/ Sheets/ Strips

Copper Scrap 1.05 kg

1 kg Copper Ingot/ Copper Cathode OR

1.02 kg

Copper Strip in Coil OR

1.01 kg

C1186 Copper Foils


C1187 Copper sleeves 1 kg 1 Copper Scrap 1.050 kg

1 kg. 1 Copper Scrap OR


C1188 Silver Bearing Copper Strip/ Sheets/ Foil

Copper Wire Bar 1.03 kg/kg content in export

C233

2 Silver Bullion of Purity 99.99% 1.02 kg/kg content in export

1 kg 1 Copper rods OR

1.01 kg

Copper Ingots OR

1.02 kg

C1189 Copper Wire


C1190 Extruded Aluminium Products including pipes and tubes

1 kg 1 Aluminium Scrap 1.06 kg

1kg 1 Copper Scrap/ Copper Ingot 1.057 kg

2 Aluminium 0.110 kg

C1191 Finished machined Bronze castings Alloy Aluminium Bronze BS 1400-AB-1 (copper content 87% alum. content 10%, Iron content 3%)

3 Iron 0.044 kg

1 kg 1 Copper 0.880 kg

2 Lead 0.110 kg

C1192 Finished machined Bronze castings Alloy Leaded Bronze BS 1400-AB2 (Coper content 80%, lead 10% and Tin 10%)

3 Tin 0.146 kg

1 kg 1 Lead 1.0343 kg C1193 Lead Antimony Wire 4.5mm Dia (Sb 1.5% Pb 98.5%)

2 Antimony 0.0158 kg

1 kg 1 Lead 0.940 kg C1194 Lead Antimony wire 6.45mm dia ( Sb 10.5% Pb 89.5%(

2 Antimony 0.1103 kg

C1195 Lead Ingots 99.97% Purity/Antimonial Lead(Lead Antimony Alloy)/ Calcium Lead Alloy (Lead Calcium Alloy)

1 Kg 1 Lead Scrap namely ISRI Radio, Racks, Relay, Ropes & Roses


1 Kg 1 Nickel Silver Scrap OR

1.090 Kg/kg content in export product

1 a) Copper Wire Bar/ Cathode/ Ingot/ Rod OR Copper Scrap

1.064 kg/kg content in the export product OR 1.075Kg/Kg content in the export product.

b) Zinc Ingot 1.064 kg/kg content in the export product

c) Nickel Cathode 1.064 kg/kg content in the export product

2 Zinc Ingots 1.05 Kg/kg content in export product

C1196 Nickel Silver Strip for Defence, Electronics and telecommunication purposes

3 Nickel Cathode 1.05 Kg/kg content in export product

1 Kg 1 Copper Wire Bar/ Cathode/Ingot/Rod OR Copper Scrap

1.05 Kg/Kg content in export OR 1.075Kg/Kg content in the export product.

C1197 Nickel Silver Wire

2 Zinc Ingot 1.05 Kg/Kg content

C234

in export 3 Nickel Cathode 1.05 Kg/Kg content

in export

C1198 Nickel Wire and /or Strip.

1 MT 1 Nickel Cathode and/or Nickel Pellet

1.03 MT

C1199 Pen Part-Mouth piece made of Brass

1 Kg. 1 Brass Scrap 1.075 Kg

C1200 Phosphor Bronze fabric 1 kg 1 Phosphor Bronze Wire Rod 1.050 kg

1 Kg 1 Phosphor Bronze Scrap OR


1 a) Copper Wire Bar/ Cathode/ Ingot/ Rod OR Copper Scrap

1.064 kg/kg content in the export product OR 1.075Kg/Kg content in the export product.

b) Tin Ingot 1.064 kg/kg content in the export product

C1201 Phosphor Bronze strips for tele-communication and electronics, including computer application

2 Tin Ingot 1.05 Kg/Kg of tin content

1 kg 1 Copper Wire Bar/Cathode/Ingot/Rod OR Copper Scrap

1.05 kg/kg content in export OR 1.075Kg/Kg content in the export product.

C1202 Phosphor Bronze Wire(Tin Bronze Core Wire)

2 Tin Ingots 1.05 kg/kg content in export

C1203 Pressure Die Cast Article made of Zinc.

1 kg 1 Zinc Ingots 1.100 kg

C1204 Pure Copper Powder 100 kgs 1 Copper 104.712 kgs

C1205 Deleted

C1206 Silver Cadmium Oxide Contact

1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content in export

C1207 Silver Graphite contact 1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content in export

1 Kg 1 Silver Bullion Purity 99.9 % 1.03 kg/kg content in export

C1208 Silver Nickel Contacts

2 Nickel 99.8% purity 1.05 kg/kg content in export

1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content in export

C1209 Silver Tungsten Graphite Contact

2 Tungsten Graphite Purity 99.95% 1.05 Kg/kg content in export

1 MT 1 Lead 1.01 MT/MT content in export.

C1210 Solder Bar (of Lead & Tin)

2 Tin 1.01 MT/MT content in export.

1 kg 1 Aluminium Powder 205 gms.

2 Iron Oxide 614.3 gms.

3 Ferro Alloy 40.9 gms.

C1211 Thermit Mixture/Powder containing Iron Oxide, Aluminium Powder

4 Addition (name to be specified) 139.3 gms.

C1212 Tin Ingots 1 kg 1 Tin Dross OR Tin Scrap

1.15 kgs OR 1.06kgs

C235

1 MT 1 Tin concentrate with Tin content of 55% to 65%

800 kgs C1213 Tin Metal of minimum 99.5% Purity

2 Tin Metal of purity 99.8% 300 kgs

C1214 Valve Stamps made of Brass

1 Kg. 1 Brass Scrap 1.20 kg/kg content of brass in the export product

1 kg 1 Phenol Formal-dehyde Resin 0.167 kg

2 Fibreglass Chopped Strands 0.222 kg

C1215 Asbestos Free Roll Linings

3 Acrylonitrile Butadiene Rubber/ Nitrile ButileRubber

0.333 kg

1 kg 1 Cobalt 1.05 kg/Kg content in export.

2 Nickel 1.05 kg/Kg content in export.

3 Pure Iron 1.2 kg/kg content in export.

4 Aluminium Ingot 1.10 kg/kg content in export.

C1216 Cast Alloy permanent magnets

5 Copper 1.10 kg/kg content in export.

C1217 Shifted to Chemical Group


C1219 Shifted to Textiles Group

C1220 Shifted to Electronic Group


C1222 Hose Wire (Brass Plated) 1 Kg 1 Brass Plated Wire (Cold Drawn) 1.02 Kgs.

1 kg 1 Cobalt 0.26 kg

2 Nickel 0.15 kg

3 Pure Iron Powder 0.55 kg

C1223 Magnetic Assemblies Incorporating cast Alloy permanent magnets e.g.holders/ positions/ floaters 4 Copper 0.033 kg


1 kg 1 Copper Powder 0.791 kg


3 Natural Graphite 0.196 kg

C1225 Metal Graphite Block

4 Lead Powder 0.050 kg

C1226 Spikes for use as Railway Track material

1 kg. 1 MS Billets 1.21 kg

Note:- In case the export product is galvanised, in addition to the above item, Zinc @4% of Net weight of Steel to be galvanised may be allowed.


2 Lead 34.49 Kgs


C1227 Steel backed lead based white metal (babbit) alloy bimetal strip generally confirming to SAE 13 or equivalent Antimony Ingots/Scraps 4.13 Kgs

C236


2 Lead 34.49 Kgs


4 Antimony Ingots/Scraps 5.99 Kgs

C1228 Steel backed lead based white metal (babbit) alloy bimetal strip generally confirming to SAE 15 or equivalent

5 Arsenic 0.41 Kgs

1.0 kg containing 0.5 kg.Tungesten Disc.& 0.5 kg. remaining items

1 Tungsten Rod 1.1 kg C1229 Tungsten Disc alongwith Rod End, Cutting Sludge, Burnishing Sludge, Scrap Disc

2 Alumina Oxide Abrasive Cutting Wheels - OD 180 mm, ID 12.7 mm and Thickness 0.42 mm

5 Nos.

C1230 Head Pan 1 No 1 CRCA Sheet/Coil 0.7 mm - 1.0 mm Thickness


1 No A. RAW MATERIAL:

1 Free Cutting Steel 2.1314 kgs

2 Ball Bearing Steel 1.8189 kgs

3 Cold Heading and Cold Extruding Steel Wires

1.0714 kgs

4 Case Hardening Steel Flats 1.8182 kgs

5 Profile Steel Bars 2.9762 kgs

6 Extrusion & Cold Forging Steel Bars/Rods

1.0094 kg

7 Aluminium Alloy Ingot 1.2264 kg

B. COMPONENTS:

8 Gasket 12 Nos.

9 Valve Holder 2 Nos.

10 Ball 3 Nos.

11 Screws, all types 34 Nos.

12 Springs, all types 6 Nos.

13 Shims 4 Nos.

14 Washers, all types 20 Nos.

15 Seal Rings/O Rings/Shaft Seal Rings/Spacer Rings

13 Nos.

16 Threaded Bushings 2 Nos.

17 Closer Cap 1 No.

18 Sliding Sleeve 1 No.

19 Control Plunger 1 No.

20 Needle Roller Bearing 1 No.

21 Tappered Roller Bearings 2 Nos.

22 Levers 4 Nos.

23 Flyweight Castings 2 Nos.

C1231 Multi Cylinder Fuel Injection Pumps for Diesel Engines

24 Shaft 1 No.

C237

25 Link Fork 1 No.

26 Locking Bolt 1 No.

27 Housing/Stop Housings 1 No.

28 Connecting Flange 3 Nos.

29 Valve Plates 4 Nos.

30 Spring Retainer 1 No.

31 Sealing Nut 1 No.

32 Pulling Electro Magnet 1 No.

33 Feed Pump 1 No.

34 Guide Bushing 1 No.

35 LDA/Manifold Pressure compensator

1 No.

36 Template 1 No.

37 Roller Tappet Body 4 Nos.

38 Stop Bracket 1 No.

39 Lever Shaft 1 No.

40 Bearing Shell 1 No.

41 Curve Template 1 No.

42 Link 1 No.

43 Screw Plug 2 Nos.

44 Strap 2 Nos.

C. Misc. items:

45 Calibration Fluid (Test Oil) for Diesel Injection Pump,

CBN/Diamond Honing Stick Blanks/Support Stone/Deburring Tools,

Hone Holders,

Plain Grinding Wheels/Disc Wheels for Lap/ Match Grinding/ CBN Wheels,


Carbide End Mills/ Tools,

Gear Shaper,

Diamond Dresser,

Deep Hole Drills,

Reamers,

Oil Stones,

Broaches,

Drills,

Rack Milling Cutters,

Machine Taps,

Filter Paper/ Media and

Super Finishing Stones

C1232 Taper Roller Bearings 1000 Nos 1 Forged/Turned Inner Ring (Cone) in unfinished condition

1100 Nos.

C238

2 Forged/Turned Outer Ring (Cup) in unfinished condition

1100 Nos.

3 Finished Cages (Retainer) 1010 Nos.

4 Finished Rollers OR

17000 Nos.

Cold Drawn Wire OR

110 kgs

Wire Rod 115 kgs

upto and including 400 gms per bearing weight

5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust preventing Oils, Honing Oil & Anti Corrosion Lubricant

Up to 5% of FOB value of export.

For the export of assembled cones upto and including 300 gms, the items at S.No. 1,3,4 & 5 only shall be allowed.

1000 Nos 1 Forged/Turned Inner Ring (Cone) in unfinished condition

1100 Nos.


1100 Nos.



17170 Nos.

Cold Drawn Wire OR

285 kgs

Wire Rod 299 kgs

C1233 Taper Roller Bearings above 400 gms per bearing but upto and including 800 gms per bearing weight

5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion Lubricant


For the export of assembled cones above 300 gms and upto and including 600gms, the items at S.No. 1,3,4 & 5 only shall be allowed.


1100 Nos.


1100 Nos.



18580 Nos.

Cold Drawn Wire OR

357 kgs

Wire Rod 375 kgs






1100 Nos.


1100 Nos.



4 Finished Rollers 18380 Nos.

C239

OR

Cold Drawn Wire OR

574 kgs

Wire Rod 603 kgs




1000 Nos. 1 Forged/Turned Inner Ring (Cone) in unfinished condition

1100 Nos.


1100 Nos.



17170 Nos.

Cold Drawn Wire OR

629 kgs

Wire Rod 660 kgs

C1236 Taper Roller Bearing above 1600 gms per bearing but upto and including 2000 gms per bearing weight



For the export of assembled cones above 1200 gms and upto & including 1500gms, the items at S.No. 1,3,4 & 5 only shall be allowed.


1100 Nos.


1100 Nos.



20100 Nos.

Cold Drawn Wire OR

792 kgs

Wire Rod 832 kgs




For the export of assembled cones above 1500 gms and upto & including 1800gms, the items at S.No. 1,3,4 & 5 only shall be allowed.


1100 Nos.


1100 Nos.



16160 Nos.

Cold Drawn Wire OR

1300 kgs

C1238 Taper Roller Bearings above 2400 gms per bearing weight

Wire Rod 1365 kgs

C240

5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion LubricantLubricant


Note: In respect of Sl.No.C1232 to C1238, material of construction for items of imports appearing at Sl.Nos.1, 2 & 4 in each weight range shall be bearing quality alloy steel to grades SAE 52100/8620H/20 Hi-MC/8219 R or equivalent.For the export of assembled cones above 1800 gms, the items at S.No. 1,3,4 & 5 only shall be allowed.

1 No 1 Clamping Elements Net to net.

2 Toggle Levers Net to net.

3 Clamping Screws Net to net.

4 Driver for screws (Torx keys) Net to net.

5 Shim Pins Net to net.

6 Tungsten Carbide Shims Net to net.

C1239 Indexable Tool Holder

7 Tungsten Carbide Inserts (Consumable)


1000 kgs. 1 Silicon Carbide Crude OR Silicon Carbide Grains (Silicon Carbide percentage less than 95%)

1225 kgs OR 985 kgs

2 Micro Silica 75 kgs

C1240 Oxide Bonded Silicon Carbide Refractory

3 Calcium Lignosulphonate (Lithopix)

40 kgs

1 kg 1 Pig Iron/Scrap 1.00 kg C1241 TT Cam

2 Steel Scrap 0.20 kgs

1 kg 1 Pig Iron/Scrap 1.00 kg C1242 Shuttle Race Complete

2 Steel Scrap 0.20 kg

1 kg 1 Pig Iron/Scrap 1.00 kg C1243 Clamp Stop Motion


1 kg 1 Steel Scrap 0.20 kg C1244 Crank

2 Pig Iron/Scrap 1.00 kg

1 kg 1 Pig Iron/Scrap 1.00 kg C1245 Needle Clamp


1 kg 1 Pig Iron/Scrap 1.00 kg C1246 Feed Regulator


1 kg 1 Pig Iron/Scrap 1.00 kg C1247 Feed Fork


1 kg 1 Pig Iron/Scrap 1.00 kg C1248 Feed Driven Rock Shaft Crank 2 Steel Scrap 0.20 kg

1 kg 1 Pig Iron/Scrap 1.00 kg C1249 Feed Lifting Rock Shaft


C1250 Shuttle Race Ring 1 kg 1 CRCA Sheet 2.00 kg

C1251 Shuttle Driven 1 kg 1 CRCA Sheet 2.00 kg

C1252 Face Plate Complete 1 kg 1 CRCA Sheet 1.30 kg

C1253 Slide Plate 1 kg 1 CRCA Sheet 1.07 kg

C241

C1254 Tension for Plate 1 kg 1 CRCA Sheet 1.00 kg

1 kg 1 CRCA Sheet 0.6 kg C1255 Bobbincase

2 MS Alloy Steel Bar/Rod 3.0 kgs

C1256 Bobin Winder Complete 1 kg 1 CRCA Sheet 1.5 kg

C1257 Lifter 1 kg 1 CRCA Sheet 1.33 kg

C1258 Thread Take Off Lever 1 kg 1 CRCA Sheet 2.00 kg

C1259 Roller for Regulator 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.5 kg

C1260 Pressure Bar Thumb Screw

1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg

C1261 Pressure Foot 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg

C1262 Feed Cam 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg

C1263 Needle Bar Bushing 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.6 kg

C1264 Link Body 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.6 kg

C1265 Stud 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.15 kg

C1266 Arm Shaft 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg

C1267 Head Hinges 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg

C1268 Pitman with Rod 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg

C1269 Stand Fitting 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg

C1270 Pitman Crank with Fittings


C1271 Single piece forged and machined shuttle hook.

1 kg 1 Mild Steel/Alloy Steel/ Bars/Rods of relevant grades.

6 kg

C1272 Centre Small Screw with Nuts


C1273 Needle Plate 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg

C1274 Pressure Bar 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg

C1275 Screw & Nut for Feed Fork


C1276 Needle Bar 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg

C1277 Screw & Nut for CC Rod 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg

C1278 Shuttle Race Top Spring 1 kg 1 MS/Alloy Steel/ Bars/Rods 2.00 kg

C1279 O/S Rock Shaft 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.1 kg

1000 Nos 1 Steel Wire/Bar/ Rod 22 kgs

2 Seamless Steel Tubes 30 kgs

3 Steel Balls 8250 Nos.

4 Cages (Retainer) 1050 Pairs

C1280 Ball Bearing upto and including 50 gms/Bearing

5 Metal Shield Plates/Rubber Seals (with backing Steel Sheet)

2100 Nos.

1000 Nos 1 Steel Wire/Bar/ Rod 50 kgs

2 Seamless Steel Tubes 65 kgs



C1281 Ball Bearing above 50 gms but upto 100 gms/Bearing


2100 Nos.

C242

1000 Nos 1 Seamless Steel Tubes 230 kgs




4 Metal shield Plates/Rubber Seals (with backing Steel Sheet)

2100 Nos.

1000 nos 1 Seamless Steel Tubes 570 kgs





2100 Nos.

1000 nos 1 Seamless Steel Tubes 980 kgs





2100 Nos.

1000 nos 1 Inner Race of Bearing (in Ring form)

1050 Nos.

2 Outer Race of Bearing (in Ring form)

1050 Nos.



C1285 Ball Bearing above 1000 gms/Bearing


2100 Nos.

Note: 1 In respect of norms covered by Sl.No.C1280 to C1285, materialof construction for Inner/Outer Race, Seamless Steel Tubes, Steel Wire/Bar/Rod and Steel Balls should be bearing grade steel to specification SAE 52100 or equivalent.2. In addition to the inputs specified against the norms at S.No.C 1280 to C-1285, import of miscellaneous items namely Grease, Grinding Wheels, Honing Stones, Polishing Compound, Diamond Drilling Roller, Rust Preventing Oil and Chemicals shall bepermitted for a total CIF value restricted to 5% of the FOB value.3) Import of Shield should be allowed only in respect of Bearing fitted with Shield.4) Wherever there is export of Ball Bearing with Housing, after ascertaining the weight of the Ball Bearing, the import of input may be allowed applying relevant SION at C-1280 to C-1285.

C1286 Diesel Engine 1 No 1 Piston Assembly Set Net to net.

1 kg 1 Steel Wire Rods/ Wire Coils of 100 CR6 (SAE-E-52100)


C1287 Taper Rollers for Bearings

2 Grinding Wheels and Die/Steel Tool


1 No 1 Steel Balls Net to net.

2 Disc Spring Net to net.

3 Hex Hd Bolt Net to net.

4 Hex Full Nut Net to net.

C1288 Ball Valve

5 Int. Lock Washer Net to net.


2 Welding Wire 4.13 kgs

3 Epoxy Powder 0.119 kg/ Sq.Mtr. of Pipe.

4 Adhesive 0.261 kg/ Sq.Mtr. of Pipe.

C1289 Carbon Steel Submerged Arc Welded Pipes with 3 Layer Polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr.

5 Polyethylene 2.53 kg/ Sq.Mtr. of Pipe.

C243

6 Misc. items: Welding Flux, Grinding Wheel, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel,Prep. tape, Prep. Filler,Heat Shrink Sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil.

Up to 6% of FOB value of exports.

Note: 1 An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT.






C1290 Carbon Steel Submerged Arc Welded Pipes with 3 Layer Polyethylene coating of 2.5 mm thickness and having coating weight of 3. 15 kgs +/- 5% per Sq.Mtr.

6 Misc. items: Welding Flux, Grinding Wheel, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel, Prep. Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil.

Up to 6% of FOB value of export.







C1291 Carbon Steel Submerged Arc Welded Pipes with 3 Layer Polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr.

6 Misc. items: Welding Flux, Grinding Wheel, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel,Prep. Tape, Prep. Filler,Heat Shrink sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil.

The CIF value of all these items taken together is restricted to 6% of the FOB value







C1292 Carbon Steel Submerged Arc Welded Pipes with 3 Layer Polyethylene coating of 3.5 mm thickness and having coating weight of 4.20 kgs +/- 5% per Sq.Mtr.

6 Misc. items: Welding Flux, The CIF value of all

C244

Grinding Wheel, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel, Prep. Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil.

these items taken together is restricted to 6% of the FOB value


1 kg 1 Copper Wire Bar/ Wire Rod 1.01 kg/kg content in the export product.

C1293 Double Fibre Glass Covered/Insulated Round/Rectangular Copper Wire Strip

2 Glass Fibre Yarn 1.03 kg/kg content in the export product.

C1294 Filter Packs made of Stainless Steel Wire Mesh (Fitted in Aluminium Rings)

1 kg 1 Stainless Steel Wire Mesh 1.20 kg/kg content in the export product.

1 No 1 Mechanical Seal Net to net.

2 Single Row Deep Groove Ball Bearing

Net to net.

C1295 Horizontal Split Case Single Stage Double Suction Pump

3 CDA-975 Ingot (Silicon Bronze) 1.05 kg/kg weight of finished Impeller.

C1296 Zinc Anode 1 kg 1 Special High Grade Zinc 1.03 kg/kg content in the export product.

1 kg 1 Aluminium Ingots 1.05 kg/kg content in the export product.

C1297 Alluminium Anode

2 Zinc 1.03 kg/kg content in the export product.


1 kg 1 Relevant CR Steel/Bimetal steel Strip/Wide Coil

1.20 kg C1299 Band Saw Segments/Band Saw in Coil made from Carbon Steel/Bimetal Steel

2 Gang Milling Cutter 1 Gang/ 1474 kgs of export.

Note: 1 The total CIF value of item 2 shall not exceed 5% of FOB value of exports.

1 No 1 Alloy Steel Bar/ Rod 1.3 kg/kg content in export.

2 CRCA Sheet/Coil/ Seconds 1.2 kg/kg content in export.

C1300 Domestic Sewing Machine with standard accessories/ Embroidery Sewing Machine/Industrial Sewing Machine/ Overlock Sewing Machine with or without cover

3 Pig Iron/CI Scrap/ Steel Scrap 1.2 kg/kg content in export.

1 No 1 Alloy Steel Bar/ Rod 1.3 kg/kg content in export.

2 CRCA Sheet/Coil/ Seconds 1.2 kg/kg content in export.

C1301 Portable Bag Closure Machine

3 Aluminium Ingots 1.1 kg/kg content in export.

1 No 1 GP Sheets/Coils OR

1.05 Kg/kg content of steel items in export product.

C1302 L.V. Distribution Pillar

CRCA Mild steel sheets/coils (including Secondary &

1.05 kg/kg content of steel items in export

C245

Defective) OR

product.

Aluminium Sheet OR Aluminium Alloy Ingot (CG grade/ EC grade)

1.01 kg/kg content of Aluminium items in the export product. 1.01 kg

2 Copper Wire Bars/Copper Strips (Electrolytic/ETP Grade)

1.01 kg/kg content of Copper items in export product.

3 Brass Scrap 1.05 kg/kg content of Brass items in export product.

4 Electrical Component Net to net

1 No 1 Glass Reinforced Plastic enclosures

Net to net.



C1303 L.V. Distribution Cabinet

3 Brass Scrap 1.05 kg/kg content of Brass items in export

1 No 1 CRCA Mild Steel Sheets/Coils (including Secondary & Defective) OR


GP Sheets/Coils (including Secondary & Defective)


C1304 Switch Fuse Unit



C1305 Bolt, Nut, Sleeve for Wheel Assembly

1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets

2.12 kgs/kg content in export.

C1306 Flange Type Rear Axle Shaft

1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets


C1307 Treaded Adopter 1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets


C1308 Wheel Wrench 1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets


C1309 Round/rectangular High Beam Head Lamp

1 No 1 Relevant Diffusion Lens 1 No.

C1310 Round/Rectangular Fog Lamp


C1311 Round/Rectangular Work Lamp


1 No 1 CRCA Sheets/Coils OR

1.05 kg/kg content of steel items in the export

GP Sheets/Coils OR

1.05 kg/kg content of steel items in the export

C1312 Electrical Cutout

Aluminium Sheet OR Relevant Glass Reinforced Plastic Enclosures

1.01 kg/kg content of Aluminium item in the export product Net to net

C246

2 Copper Wire Bars/ Copper Strips 1.01 kg/kg content of Copper items in the export product.

3 Brass Scrap 1.05 kg/kg content of Brass items in the export product.

C1313 Drill Collars Magnetic or Non Magnetic Slic or Spiral

100 No 1 Relevant Hollow Drill Collar Bar, Tube, Magnetic or Non Magnetic of relevant dia

102 Nos.

1 kg 1 Silver Bullion (Minimum Purity 99%)


2 Copper(Minimum Purity 99%) 1.05 kg/kg content in the export Product.

3 Zinc (Minimum Purity 99%) 1.05 kg/kg content in the export Product.

4 Cadmium(Minimum Purity 99%) 1.05 kg/kg content in the export Product.

5 Nickel(Minimum Purity 99%) 1.05 kg/kg content in the export Product.

C1314 Silver Brazing Alloy in the form of Strips/ Wire/ Powder/ Foil/ Blanks/ Discs/ Profile/ Sheet/ Rod as per ASTM/ JIS/ DIN/ BIS/IBS standard or equivalent

6 Tin (Minimum Purity 99%) 1.05 kg/kg content in the export Product.

C1315 Electroformed Nickel Micro Screen

1 No 1 Inco `s' Nickel Round/ Pellets Unwrought and Unalloyed


1 kg 1 Tungsten Wire above 0.9 mm 1.08 kg C1316 Tungsten Wire(Black)

2 Colloidal Graphite with solid content of 20%

0.10 kg

1 kg 1 Tungsten Wire above 0.9 mm 1.12 kg C1317 Tungsten Wire (Clean)

2 Colloidal Graphite with solid content of 20%

0.10 kg

1 kg 1 Gold 0.515 kg

2 Platinum 0.515 kg

3 Rhodium OR

0.010 kg

C1318 Precious Metals Spinnerettes containing Gold 49.5%, Platinum 49.5% & Rhodium 1%

Scrap Spinnerettes/ Eyes/ Thimbles of relevant grade.

1.04 kg/kg content of each precious metal in the export product

Note: In case of any change in the specification of the export product, the requirement may be worked out by allowing 4% wastage on net content of each item in the export product.

1 MT 1 Boiler Quality Plates 1.075 MT

2 Welding Wire 9 kgs

C1319 Containers made of Boiler Quality Plate for Chlorine

3 Welding Flux 11 kgs

Note: The cummulative value of items 2 & 3 shall not exceed 5% of FOB value of exports.

1 No 1 Body Clips/Cable Ties Net to net.

2 Cable Channels Net to net.

3 Cavity Plugs Net to net.

4 Connector Covers Net to net.

5 Connectors Net + 2% wastage.

6 Conv. Conduits Net to net.


C1320 Integrated Wiring Harness

8 End Fittings Net to net.

C247

9 Fuseboxes Net to net.

10 Fuses Net to net.

11 Grommets Net + 3% wastage.

12 Moulded Connector Assemblies Net to net.

13 Octane Rating (Resistor) Net to net.

14 PVC Coated Copper Wires Net to net.

15 PVC Tapes Net + 2% wastage.

16 PVC Tubes or Nylon Knitted Texture Tube

Net to net.

17 Ring Out Labels Net to net.

18 Seals Net to net.

19 Sec. Locks Net to net.

20 Shrink Tubes Net to net.

21 Sleeves Net to net.

22 Splice Clips Net to net.

23 Terminals Net to net.

24 Tesa Bands Net to net.

25 Textile Tapes (Relevant width and length)

Net + 2% wastage.

26 Silicon Spray Net to net.

27 Terrostat Net to net.

1 No 1 Aluminium Ingot/ Aluminium Scrap OR

1.05 kg/kg content in the export

Aluminium Housing Net to net.

2 Cold Rolled Non-Grain Oriented (CRNGO) Electrical Steel Sheet OR


Stator & Laminations of Rotor Net to net.

3 Self Solderable Enamelled Copper Wire OR


Self Bonding Copper Wire or CC Copper Rod (Electrolytic Grade)


4 Polybutlyne Therpetlate/ Nylon 66/ Polycarbonate


5 Expandable Polystrene 1.05 kg/kg content in the export product.

6 Copper Wire/Strip 1.01 kg/kg content in the export product.

7 Label Paper 1.05 kg/kg content in the export product.

8 Components:

a) Housing Clip

b) Lock Washer (Circlip)

c) Insulation Sleeve

d) Brass Insert

C1321 Instrument Cooling Fan Sleeve Bearing Type or Ball Bearing Type 110V AC/ 115V AC/ 220V AC/230V AC/24V AC

e) Shaft

C248

f) Screw with Washer Net to net.

g) Terminals

h) Finger Guard

i) Polyslider Washer

j) Teflon Washer

k) O-Ring

l) Sintered Bush

m) Interlock

n) Spring

o) Ball Bearing

p) Brass Washer

q) Hook up wire

9 Misc. items:

Epoxy Paint,

Epoxy Bond, Upto 2% of

Lubricating Oil, FOB value

Cynoacrylic Adhesive, of export.

Varnish or Electrical Insulating Enamel and

Insulation Tape

10 Impellor 1 Pc.

11 Thermistor 1 Pc.

1 kg 1 Copper Wire Bar/ Wire Rod/Cathode


C1322 Double Fibre Glass Covered/Insulated Round/Rectangular Copper Wire/Strip


C1323 Enamelled Rectangular Copper Wire/ Strip



1 kg 1 Copper Wire Rod/Cathode 1.01 kg/kg content in the export product.


C1324 Polymide Imide Enameled Glass Fibre Yarn covered Copper Conductor.

3 Polyamide imide enamel. 1.01Kg/Kg content in the export product.



2 Kapton Polyamide Film 1.015 kg/kg content in the export product.

C1325 Kapton Polyamide Film Insulated/ Covered Copper Wire/Strip

3 Polyester Glass yarn 1.01Kg/Kg content in the export product.

C1326 Protective Apron for X-Ray having 0.25mm/0.35mm/ 0.50mm Lead equivalent thickness

1 No 1 X-Ray Protective Sheeting of Lead having 0.125mm/ 0.175mm Lead equivalent thickness

1.05 Sq.Mtr/ Sq.Mtr content in export.

Note: The export product is normally Two/Three fold of the thickness of Lead Equivalent Sheet imported. The quantity may accordingly be worked out. For example, in case the thickness of sheet of Lead Equivalent exported is 0.35mm and the thickness of shet imported is 0.17mm, the quantity of import to be allowed is 1.05x2=2.10 Sq.Mtr/Sq.Mtr of Sheet exported. Requirement for other thickness may be worked

C249

out in similar way.

1 No 1 CRGO steel Laminations/ Sheets/ Coil/ Slits/ Cuts

2.64 kg per KVA

2 Copper winding wires/ Strips/ Wire bars/ Wire Rods/ Cathodes

0.78 kg per KVA

3 Carbon in brushes/ Blocks/ Rollers

5.0 Cub. Cm. per KVA

4 Brush Holder assembly Net to net

C1327 Auto Transformers (Variable Voltage)(a) upto 30 KVA I phase or 90 KVA 3 phase

5 Servo Motor Magnets for Motors Net to Net

1 No 1 Stainless Steel Sheet/Coil SS304/ 316 Quality 1.25mm to 4mm


2 Stainless Steel Rounds/Bars 10mm to 50mm


3 Stainless Steel Pipes 1.25mm to 3.15mm


4 Mild Steel Plate 6mm to 16mm 1.05 kg/kg content in the export product.

5 Mild Steel Rounds/ Bars 25mm to 140mm


6 Mild Steel Channel 100x50mm Net to net.

7 Seamless Tubes 215 to 450 O.D. 1.05 kg/kg content in the export product.

8 C.I. Castings 1.02 kg/kg content in the export product.

C1328 Textile Machinery Continuous Open width Chainless Mercerising Machine

9 Tapered Roller Bearings Net to net.

C1329 Cultivator (Shear) 1 kg 1 Profile Steel Bar 1.05 kg/Kg content in export.

C1330 Brass Lamp Caps 1 kg 1 Brass Scrap 1.10 kg/kg content in export.

C1331 Knives & Cutting Blades for Machine or for mechanical appliances (Centre Blade and Peanut Blade size 46-1/4" and 42" length)

1 kg 1 Alloy Steel Flat Bars 1.25 kg/kg content in the export product.

1 MT 1 M.S. Scrap 1512.72 kgs

2 Ferro Silicon (Si - 70-75%) 51.82 kgs

3 Ferro Manganese (Mn - 50-62%) 32.91 kgs

4 Nickel 69.09 kgs

5 Ferro Chrome (Cr - 60-70%) 17.87 kgs

6 Ferro Molybdenum (Mo-60-70%)

30.18 kgs

7 Furnace Oil 500 Ltrs.

8 Bantanite Green Bond (Prepared Binders)

12.00 kgs

9 Nickel Magnesium (Ni - 78-82%, Mg - 16-18% and MM - 0.7-1.2%)

22.10 kgs

10 Ferro Silicon Magnesium (Si - 50-60%, Mg - 8-10% and Fe - Balance)

22.10 kgs

C1332 Spheroidal Graphite quality Rolls for Rolling Mills - Fe-88.7%, C-3.5%, Si-2.0%, Mn-1.0%, Ni-3.8%, Cr-0.5%, Mo-1.0%, S-0.016%(Maximum) & P-0.15%(Maximum)

11 Graphite Electrodes 9.50 kgs

C250

12 Ramming Mass 20.00 kgs

13 Melted Flux 5.00 kgs.

14 Calcium Silicide 1.11 kg

15 Flourspar (Flux) 66.31 kgs

16 Porous Plug (Laddle) 0.20 No.

17 CBN Tips 5.93 Nos.




4 Nickel 10.91 kgs


6 Ferro Molybdenum (Mo-60-70%)

12.13 kgs.

7 Furnance Oil OR

500 Ltrs.

7 HSD 470 Ltrs.

8 Bantonite Green Bond (Prepared Binders)

12.50 kgs

9 Flourspar 80.67 kgs



12 Porous Plug 0.20 No.


14 Melted Flux 12.50 kgs


C1333 Steel Quality Rolls for Rolling Mills - Fe-93.8%, C-1.8%, Si-1.0%, Mn-1.0%, Ni-0.6%, Cr-1.4%, Mo-0.4%, S-0.04%(Maximum) & P-0.04%(Maximum)

16 Ferro Aluminium 1.15 kgs




4 Nickel 43.64 kgs


6 Ferro Molybdenum (Mo - 60-70%)

15.15 kgs

7 Furnance Oil 500 Ltrs.




11 Porous Plug 0.20 No.


C1334 Alloy IC Quality Rolls for Rolling Mills - Fe-90.9%, C-3.3%, Si-1.6%, Mn-1.2%, Ni-2.4%, Cr-1.1%, Mo-0.5%, S-0.1%(Maximum) & P-0.3%(Maximum)





C1335 ICDP Qualaity Rolls for Rolling Mills containing Shell - Fe-88.7%, C-3.5%, Si-2.0%, Mn-1.0%,

4 Nickel 54.83 kgs

C251



7.58 kgs



12.50 kgs





Ni-3.8%, Cr-0.5%, Mo-1.0%, S-0.016% & P-0.15% & Core - Fe-93.4%, C-3.5%, Si-2.0%, Mn-0.5%, Ni-0.4%, Cr-0.2%, Mo-Nil, S-0.08% & P-0.1%.





4 Nickel 28.87 kgs



28.41 kgs



13.46 kgs

9 Nickel Magnesium (Ni - 78.82%, Mg - 16.18% and MM - 0.7-1.2%)

14.02 kgs




C1336 Hi-Crome Quality Rolls for Rolling Mills containing Shell-Fe-73.8%,C-3.0%,Si-1.0%,Mn-1.2%,Ni-1.5%,Cr-18%,Mo-1.5%,S-0.02% & P-0.06% & P-0.06%(Maximum) & Core-Fe-92.6%, C-3.2%, Si-2.0%, Mn-0.5%, Ni-1.3%, Cr-0.4%, Mo-Nil, S-0.02% & P-0.06%.





4 Nickel 45.45 kgs



6.05 kgs


8 Ferro Phosphorous 426.40 kgs


10 Ferro Sulphur 59.21 kgs


C1337 NM(H) Quality Rolls for Rolling Mills - Fe-92.1%, C-3.7%, Si-0.5%, Mn-0.4%, Ni-2.5%, Cr-0.6%, Mo-0.2%


C1338 Cold Formed Metal Section

1 kg 1 Cold Rolled Coil 1.02 kg

C1339 Brass Cup 1 kg 1 Brass Strip Annealed 1.05 kg/kg content in the export product.

C1340 Auto Gate Latch, Ring 1 kg 1 CRCA Sheet 1.05 kg/kg content in the export product.

C252

Gate Latch, Ring Handle & Hand Rail Bracket

2 M.S. Rod 1.05 kg/kg content in the export product.

C1341 Deleted

1 kg 1 CRCA Sheet 1.05 kg/kg content in the export product.

2 CRGO Silicon Steel Sheet 1.05 kg/kg content in the export product.

3 Super Enamelled Copper Wire/ Electrolytic Copper Wire Rod


4 Carbon Brush Blocks 1.10 kg/kg content in the export product.

5 Light Emitting Diodes Net to net.

6 Transistors Net to net.


8 Capacitors Net to net.

C1342 Automatic Voltage Stabilisers/Servo Control Voltage Stabilisers (upto 5 KVA Capacity)

9 Resistors Net to net.

1000 Nos 1 Cold Rolled Mild Steel Strips/Coils/Sheets.

574Kgs.

2 Manganese Chrome Steel Strips 702 kgs

3 Spring Steel Strips 150 kgs

4 Mild Steel Bars/ Wire 920 kgs

5 Stainless Steel Sheet 160 kgs

6 Aluminium Alloy (EM-6, LM-24)

4700 kgs

7 Zinc Ingot 500 kgs

8 ABS Granules 1.05 kg/kg content in the export product

9 Type Sets Net + 1% wastage.

2 ABS Granules 1250Kgs.

3 Aluminium Alloy Ingots. 4700Kgs.

4 Steel Wires (Tempered and Hardended/Profiles)

139Kgs.

5 Steel Rollers 8000Nos.

C1343 Typewriter(Manual) with ABS Casing.

6 Steel Type Sets. 45000Nos.

C1344 Tin Anode/ Bar/ Slab/ Pig (99.85% Purity)

1 MT 1 Tin Ingot 1.01 MT

1 No. 1 Transistor 148

2 Transistor 187

3 Diode - 4007

4 Capacitors 100/25 V Net to net

5 Light Emittig Diode 6mm

6 BWG 22x8 inch x 4 inch 13A Ceramic Fuse

7 Super Enamelled Copper Wire 30/33/38 SWG

110 gms

C1345 Stabilizers 110/220 V

8 Cold Rolled Cold Anealled (Mild Steel)

425 gms

C1346 Zinc Builders Hardware - 1 kg 1 Zn-Al Alloy (94%, 4% by wt.resp.) Ingot or scrap


C253

Pressure Die Cast 2 Clad Concentrate/Solvent Replenisher/Emulsion etc.



1 No. 1 CRCA sheets/Coils 1.34 kg/kg content in the export product.

C1348 Auto Parts Double Brake Chamber Type 24 L/S

2 Diaphragm Net to net

1 No. 1 CRCA sheets/Coils 1.40 kg/kg content in the export product

C1349 Auto Parts Brake Chamber Type 16 L/S

2 Diaphragms Net to net

1 No. 1 CRCA Sheets/coils 1.40 kg/kg content in the export product



1 No. 1 CRCA Sheets/Coils 1.39 kg/kg content in the export product



1 No. 1 CRCA sheets/coils 1.37 kg/kg content in the export product



1 No. 1 CRCA Sheets/Coils 1.40 kg/kg content in the export product

C1353 Auto Parts Brake Chamber Type 30 S/S


C1354 Surgical Suture Needles (Eye Type, French Spring Eye Type & Atraumatic Type Needles) upto 250 mm Length.

1 kg 1 Stainless Steel Wire of grade AISI-302/304/420/455 or its equivalent

1.25 kg

1 kg 1 Copper 1.01 kg/kg content in the export product

C1355 Auto Cables of various size

2 PVC Compound 1.03 kg/kg content of PVC Compound in the export product

C1356 Deleted

C1357 Deleted 1 No.

1 No. 1 Compressor Hermatically Sealed compressors/Reciprocating Type/Rotary Type/Scroll Type Suitable for Electrical supply of 110V or 120V or supply of 200V or 240V +/- 10% Tolerance limit and of 50 or 60 cycles capacity range:12000BTU +/- 10% Tolerance limit

Net to net

2 Bearing Assembly

3 Air Filter

4 Propeller(Fan) Condenser Fan

5 Capacitors (36 MFD. 440V)

6 Copper Tube Plan or Grooved 7.0mm O.D. to 9.52MM O.D.


C1358 Split Airconditioner 12000 BTU consisting of 1 condenser 1 Evaporator

7 Steel Sheets(GP and CRCA) Steel Sheet- GP-CRCA(0.6 mm to 2.0 mm +/- 8% thickness variation


C254

1 No. 1 CRGO Silicon Electrical steel Sheets/ Coils OR

3.667 kgs/KVA

Transformer Core Alloy Amorphous Electrical steel

4.584 kgs/KVA

2 Copper Wire Bars//Rods/Cathodes

2.412 kgs/KVA

3 Transformer Oil base stock 2.379 kgs/KVA

4 Electrical Insulation materials - kraft paper

0.612 kgs/KVA

5 Press Boards 0.140 kgs/KVA

6 Powder coating paint 0.034 kg/KVA

C1359 Single phase Transformers(copper Wound)/Active Parts of Single phase transformers, above 25 KVA, up to and including 100 KVA

7 CRCA Sheets 0.704 kg/KVA

Note: 1. CRCA Sheet to be allowed in case of complete Transformers only and not for its Active Parts

C1360 Antimonial Lead Alloy/Calcium Lead Alloy(Ingots) (purity 99.97%) (calcium content 0.01 % to 0.02 % in the Calcium Lead Alloy)

1 kg 1 Crude Antimonial Lead(Purity 90%)

1.10 kg

1 No. 1 CRGO Silicon Electrical steel sheets/ Coils OR

6.60 kgs/KVA


8.25 kgs/KVA

2 Copper Wire Bars/Rods/Cathodes

3.264 kgs/KVA


4 Electrical Insulation materials-kraft paper

0.630 kgs/KVA

5 Press Boards 0.420 kg/KVA

6 Powder Coating Paint 0.102 kg/KVA

C1361 Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA

7 CRCA Sheets 3.960 kgs/KVA

Note: 1. CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts


1.540 kgs/KVA

Transformer Core Alloy Amorphous Electrical Steel

1.925 kg/KVA


1.606 kgs/KVA



0.105 kg/KVA

5 Press Boards 0.074 kg/KVA


7 CRCA Sheets 0.440 kgs/KVA

C1362 Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA

8 Transformer Parts: a)Porcelain Bushings (HV) OR Porcelain Bushings Assembly (H.V)

2 Nos. 2 Nos. 2 Nos. 2 Nos.

C255

b)Porcelain Bushings (LV) OR Porcelain Bushings Assembly (L.V.)

9 Magnetic Oil Level Gauge 1 No.

10 Pressure Vaccum Bleeder 1 No.

11 Oil Temperature Indicator 1 No.

Note: 1. CRCA Sheets is to be allowed in case of export of complete transformers only and not for active parts. 2) In case of item No. 8, if the transformer is for H.V, item 8(a) is to be allowed only. Similarly, in case of L.V., item 8(b) is to be allowed only.


1.155 kgs/KVA


1.445 kg/KVA


1.445 kgs/KVA



0.035 kg/KVA

5 Press Boardso 0.025 kg /KVA


7 CRCA Sheets 0.198 kg/ KVA

8 Transformer Parts: a)Porcelain Bushings (HV) OR Porcelain Bushings Assembly (H.V.) b)Porcelain Bushings (LV) OR Porcelain Bushings Assemly (L.V)

2 Nos. 2 Nos. 2 Nos. >2 Nos. 2 Nos.

9 Magnetic Oil Guage 1 No.

10 Pressure Vaccum Bleeder 1 No.

C1363 Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA

11 Oil Temperative Indicator 1 No.

Note: 1. CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts.

1 kg 1 Wire Rods 1.05 kg/kg content in the export product

C1364 Steel Fence post

2 Hot Rolled Coils 1.05 kg/kg content in the export product

1 kg 1 Steel Balls Net to net

2 Castings (Machined) OR

Net to net

Cast Iron 1.45 kg/kg content in the export product

3 Forgings OR

Net to net

Bar SAE 8602 1.70 kg/kg content in the export product

4 CRCA Sheet 1.30 kg/kg content in the export product

C1365 Steeting Gear Assembly

5 Rubber (relevant) 0.65 kg/kg of rubber parts content in the

C256

export product

6 Aluminium Ingots 1.10 kg/kg content in the export product

7 Bolts Net to Net

Note: Item No. 6 Aluminium Ingots to be allowed for Steering Assembly with Aluminium Box

1 kg 1 Tungsten Wire (0.9mm & above dia)

1.12 kg/kg of Tungsten Filament export weight excluding the weight of the mandrel.

2 Molybdenum Wire (0.9mm & above dia)

0.85 kg/kg of Tungsten Filament export weight excluding the weight of the mandrel

C1366 Tungsten Filaments for "J" Type Halogen Lamps

3 Tungsten rod Up to 33% of the number of Tungsten Filaments exported.

1 No. 1 Terminal Net to net C1367 Lamp Socket Assembly for Auto Dash Board Instruments

2 Lamp (Wedge Type) Net to net

C1368 Aluminium foil Stock, Litho Stock, Closure Stock, Venetial Blind Stock, Sheets for PCB/ Sigh Boards in Sheet/ Coil Form

1 kg 1 Aluminium Scrap 1.10 kg

1 No. 1 Pig Iron 1.20 kg/kg content in the export product

2 Graphite 1.20 kg/kg content in the export product.

3 Ferro Silicon 1.20 kg/kg content in the export product.

4 Ferro Manganese 1.20 kg/kg content in the export product.

5 Ferro Chrome 1.20 kg/kg content in the export product.

C1369 Lapping Sleeves

6 Super Seed Inoculant 1.20 kg/kg content in the export product.

1 No. 1 M.S. Spiralstrip Net to Net

2 Modulator Control Valve Net to Net

3 Armored MS/SS Wire Rope 1.05 Mtr./ Mtr. in export product

C1370 Mechanical Control Cable

4 Relevant Polyacetal Tube with 19 Strand Carbon Steel Wire Outer Jacket of LDPE or Polypropylene

1.10 Mtr./Mtr. content in export product

1000 Nos. 1 Tungsten Wire (Black) 36.70 gms


C1371 Tungsten Filaments for Fluoroescent Tubes upto 20 watts


1000 Nos. 1 Tungsten Wire (Black) 41.90 gms


C1372 Tungsten Filaments for Fluoroescent Tubes 36 watts and 40 watts


C1373 PVC Insulated Single 1 kg. 1 Copper Wire Rod 1.015 kg/kg content in export.

C257

Core Cable 0.5 Sq. mm 2 PVC Compound OR 2) a)PVC Resin b)Plastisizer (PVC) c)Filler (CaCo3) d)Lubricant (wax or Lead Stearate)

1.05 kg/kg content in export 0.57 kg 0.310 kg 0.110 kg 0.01 kg

Note: The quantity of item 2(a) to 2(d) is per kg content of PVC Compound in the export product.

C1374 Machined cast components for switchgears resistance welding parts, Heat Sinks, Diode bases manufactured out of high conductivity copper with other alloying elements like Chromium, Nickel, Beryllium, Cobalt and Silicon each not exceeding 5%conforming to BS 1400-HCC1/BS1400-CC1-TF/ DIN-17655 GCU L50-DIN 17655GCU CR F35/ASTMB 770-87a/ R40, R75, R76, R78, R80 of AFNOR specification meeting conductivity requirements of 40 to 90% IACS

1 kg 1 Cathode Copper and respective alloying element Chromium, Nickel, Cobalt, Beryllium and Silicon


C1375 Machined cast Bushings of Automotive and Non Automotive applications, Pumps and value Components like casing, impellers, Discs, Plugs Yoke Sleeves, Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of gun metal or Lead Bronze or Red Brass OR with copper and allowing elements Tin, Lead and Zinc varying from 1 to 10% each, Conforming to BS 1400-LB2,LG2, LG4 Alloy BS1400-G3/DIN 1705-RG5, RG7/ ASTMB 584 OR ASTMB 763-C84400, C03200/C93700/SAE 660.

1 kg. 1 Gun Metal/ Red Brass/Leaded Bronze Ingot/Copper Cathode with alloying elements Tin, Lead and Zinc, Nickel


C1376 Machined cast bushings 1 kg. 1 Brass ingots OR Copper Cathode with alloying elements like Zinc,


C258

of Automotive & Non-Automotive application, Machined cast components for valves internals including casing, impellers,discs,plugs, yoke sleeves, Yoke bushes,seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Silicon brass/Silicon Bronze/high tensile brass or with copper and alloying elements, like Zinc varying from 10-35% and other elements like Aluminium, Manganese, Silicon, Iron Lead each not exceeding 5% conforming to ASTM B584-C87500, C87600, C87610/ASTM B371

Aluminium, Lead, Manganese and Silicon

C1377 Machined cast bushings of Automotive & Non-Automotive application, Machined cast components for valves internals including casing, impellers, discs, plugs, yoke sleeves, Yoke bushes, seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Aluminium Bronze or with coper and alloying elements like Aluminium 8 to 11% and Iron 1.5 to 3.5 conforming to BS 1400-AB1/ASTM B 148-C95200, C95300/DIN 1714 GCUAL 10 FE.

1 kg. 1 Aluminium Bronze ingots OR Copper Cathode with alloying element Aluminium


1 No. 1 Coated Steel Sheet Surface 1.02 kg/kg content in the export product

2 Galvanised Steel Sheet 1.02 kg/kg content in the export product

3 Aluminium Section 1.02 kg/kg content in the export product

C1378 Writing Boards made of coated Steel Sheet Surface

4 ABS Moulding Powder 1.05 kg/kg. content in the export product

C1379 Brush Gear Assembly 1 No. 1 Carbon Brushes of relevant 4 Nos.

C259

(for automobile starter motor)

specification

C1380 Clip Assembly 1 No. 1 Carbon Brushes of relevant 1 specification

2 Nos.

1 No. 1 Alloy Steel Bars/ Billets 1.70 kg/kg content in the export product

C1381 Gear Assembly

2 Misc Items: Band Saw Blades, Die Block/ Steel, No Carb Paste, Diamond Dresser for ID Grinding, Diamond Dresser Blade for angular wheel grinding machine, Grinding Wheel, Gun Drill, Involute Spline Broach, Welding, Wires, Hob for 71 teeth gear, gear profile grinding wheel, fassler Diamond dressing wheel


1 kg. 1 Copper Cathode/Wire Rod/Wire Bar


2 PVC Compound OR


2 a) PVC Resin 60% of PVC compound.

b) Plasticizer (PVC) 30% of PVC Compound.

c) Filler (Calcium Carbonate/ Alummina/ talc/ kaoline/China Clay

10% of PVC Compound.

3 Tinned Copper Wire 1.01 kg/kg content in the export product.

C1382 Armoured/ Un-armoured PVC Insulated Submersible/ Flexible/ Control/ Power purpose Copper Cable rating upto 1100 volts, not elsewhere specified

4 Galvanised Steel Wire 1.02 kg/kg content in export product.

Note:Tinned Copper Wire shall be allowed in Tin Copper braided/Screened flexible Copper Cables.Wherever PVC stabilizer (including molybdenum trioxide/Tin Stabilizer) is asked for, it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin.Paraffin wax wherever used may be permitted upto 1% of PVC compound subject to same percentage reduction in filler quantity.

1 No. 1 CRCA Sheet/ Coil 1.45 kg/kg content in the export

2 Filter Paper of Mean Pore size 4-14 Micron for Fuel Filter and Mean Pore 25-45 Micron for Oil Filter


3 PVC Adhesive Compound/ Glue Not exceeding 1% of FOB value of export

C1383 Automotive Oil Filter/ Fuel Filter/Spin-on Filters/Oil or Fuel Filter Assembly Canister-Lub Oil Filter/ Air Filter

4 Synthetic Rubber 1.10 kg/kg content in export

1 kg. 1 Aluminium Extruded Tubes of relevant size in terms of I.D/ O.D


C1384 Bicycle Frames made of Aluminium

2 Filler Wire for Welding 2% of net weight of export product

1 No. 1 Pure Lead 1.02 kg/kg content in the export product

2 Antimonial Lead Alloy of relevant grade


3 Fibre (CA Flock) Net to Net

C1385 Plates for Lead Acid Storage Battery

4 Vanislperse (Lignin) 1.04 kg/kg content in the export product

C260

5 Tubular Bags Net to net.

6 Cork Powder Net to net.

1 No. 1 Non-Alloy Steel Scrap 2.238 MT

2 Ferro Manganese 25 kgs.

3 Ferro Silicon 21 kgs

4 Welding Electrode 7 kgs

5 Grinding Wheel 5 kgs

6 Graphite Electrode 6 kgs.

7 Industrial X Ray Film 9440 Sq. cms.

C1386 Railway Bogie for Meter Gauge Wagons (Weight 14.2 MT)

8 Furnace Oil/LDO 212 Ltrs.

C1387 Tablet Compression Tools of Steel

1 kg. 1 Tool Steel Round Bar 1.35 kg

C1388 T-Rail Anchors made of Steel

1 MT 1 Carbon Steel Billets IS: 2830 1.05 MT

1 MT 1 Stainless Steel Sheets/ Coils (relevant grade)


2 Stainless Steel Wire/ Rods (relevant grade)


C1389 Automotive Flexible Exhaust Connectors (Corrugated) made of Stainless Steel

3 Aluminised Steel Sheets/ Coils. 1.75 MT/MT content in the export product.

C1390 Deleted

1 No. A. COMPONENTS

1 Body (Poly Ethylene) 1 No.

2 Stem (Polyacetal) 1 No.

3 Actuator (PE/PP) 1 No.

4 Inner Gasket/ O Ring (Buna Rubber)

1 No

5 Steel Ball (Stainless Steel 304) 1 No.

6 Aluminium Cap 1 No.

7 Outer Gasket or Synthetic Rubber Sheet (Buna/ NBR) OR Thermoplastic Rubber Sheet.

700 gms for 1000 Nos Gasket OR 700 gms for 1000 Nos Gasket

B. RAW MATERIALS

8 Aluminium Sheet (for Ferrules) OR Aluminium Ferrule

2.60 gms. Net to Net

C1391 Mechanical Spray Pumps (15 mm to 20 mm)

9 Plastic Granules (for Dip Tube) 1.05 gm/gm content in export

1 km 1 Continuous Cast Copper Rod/ Cathodes/ Wire bars/ Wire Rod (EC Grade)


2 Aluminium Ingots/ Rods 1.01 kg/kg content in the export product

3 XLPE Compound/Cross Linkable LDPE Compound


4 PVC Compound OR


C1392 Copper/Aluminium Conductors for XLPE Insulated Armoured /Unarmoured PVC Sheathed Cable for 1100V/L.T.

4 a) PVC Resin b) Plasticizer (PVC)

60% of PVC Compound 30% of PVC

C261

c) Filler (Calcium Carbonate/Alumina/Talc/Kaolin/China Clay

Compound 10% of PVC Compound

5 Steel Armouring Wire 1.02 kg/kg content in export product

Note: Wherever PVC Stabilizer (including molybdenum trioxide/Tin Stabilizer) is asked for, it may be allowed upto 3% of the quantity of PVC Compound, subject to reduction of the same %age in the quantity of PVC resin. Paraffin wax wherever used may be permitted upto 1% of PVC compound subject to same percentage reduction in filler quantity.

1 No. (Weight 46 Kgs +/-1%)

1 Non-alloy Steel Plates for Rim (HSN No. 7208.52)

24.43 kg

2 Non-alloy Steel Plates for Disc (HSN No. 7208.51)

24.64 kg

3 Non-alloy Steel Sections for Ring Special 'Z' type Section (HSN No. 7216.50) OR

9.0 kg.

1. Non Alloy Steel Plates for Rim Integral with Ring

33.43 Kg

C1393 Truck & Trailer Wheels

2. Non Alloy Steel Plate for Disc 24.64 Kg

1 kg 1 a) Primary Unalloyed Aluminium OR Aluminium Scrap

1.02 kg/kg content in the export OR 1.05 Kg/Kg content in the export proudct.

b) Magnesium 1.10 kg/kg content in the export product

c) Silicon 1.075 kg/kg content in the export product

2 Aluminium Alloy Ingots/ Billets/ T-Bars/ Sows


C1394 All Aluminium Alloy Conductors

3 Aluminium Alloy Wire Rod 1.01 kg/kg content in the export product

1 No. 1 Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets in Coil form OR CRCA Steel Sheets in Coil form

47.80 gms/Watt 47.80 gms/Watt

2 Copper Wire Bars/Cathods/Rods/Winding Wires/Strips

10.41 gms/watt

3 Electrolytic grade Aluminium for Rotor

10.00 gms/watt.

4 Commercial grade Aluminium in Ingot form (upto 99.5% purity) for Housing OR CRCA Sheet for Housing OR Mild Steel Sheet for Housing

10.00 gms/watt OR 15 gms.watt OR 10.99gms/watt.

5 EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft.

9.65 gms/watt.

6 Ball/Sleeve/Roller Bearing 2 Nos. (Net to Net).

C1395 Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts.

7 Composit insulation material upto 1.5% of FOB

C262

consisting of paper, Nylon, Polyester, Amide, Nomex films, Varnish, Tpe, Polyester cord.

vlue of export.

8 Special packing material like Kraft paper for exportworthy packing lables, names plate, ribbon

Upto 3% of FOB vlue of exports.

9 Motor protectors/thermal protectors/thermo strips.

Net to net.

10 Power Capacotpr. 1 No. (Net to net).

11 Plastic insulated wire/Cable. 6 Mtrs. (net to net)

12 Terminals, connectors. 8 Nos. each (Newt to net).

1 No. 1 Cold Rolled Non- Oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coil form


2 Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips

7.19 gms/Watt

3 Electrolytic grade Aluminium for Rotor

5.58 gms/Watt

4 Commercial Grade Aluminium in Ingot form (upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR Mild Steel Sheets for Housing

6.00 gms/Watt 9.00 gms/Watt 8.36 gms/Watt

5 EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft

5.70 gms/Watt

6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to Net)

7 Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape polyester cord

Upto 1.5% of FOB value of export

8 Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon


9 Motor Protectors/ Thermal Protectors/ Thermo Strips

Net to Net

10 Power Capacitor 1 No. (Net to Net)

11 Plastic Insulated Wire/Cable 6 Mtr. (Net to net)

C1396 Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts

12 Terminals, Connectors 8 Nos. each (Net to Net)

1 No. 1 Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coilform



4.98 gms/Watt

3 Electrolytic grade aluminium for Rotor

2.80 gms/Watt


4 Commercial Grade Aluminium in 2.80 gms/Watt

C263

Ingot form (Upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR Mild Steel Sheets for Housing



1.98 gms/Watt

6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to net)

7 Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord

Upto 1.5% of FOB value of export.




Net to Net


11 Plastic Insulated Wire/ Cable 6 Mtr. (Net to net)

12 Terminals, Connectors 8 Nos. each (Net to net)

1 No. 1 Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coil form



2.76 gms/Watt


2.80 gms/Watt

4 Commercial Grade Aluminium in Ingot form (Upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR Mild Steel Sheets for Housing



1.98 gms/Watt

6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to net)


Upto 1.5% of FOB value of export.




Net to net





C1399 Single Phase Shell 1 No. 1 Cold Rolled Non-oriented 19.39 gms/Watt

C264

(CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coil form

19.39 gms/Watt


1.89 gms/Watt


1.63 gms/watt.

4 Commercial Grade Aluminium in Ingot form (Upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR>Mild Steel Sheets for Housing



1.18 gms/Watt

6 Ball/Sleeve/ Roller Bearings 2 Nos. (Net to net)


Upto 1.5% of FOB value of export




Net to net



construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above


1 No. 1 Aluminium Tube of relevant size in terms of LD/OD.


C1400 Bicycle Frames made of Aluminium

2 Filler Wire for Welding 2% of net weight of the export product.

1 No. 1 Aluminium Foil 1.05 kg/kg content in the export product

2 Molecular Sieve 3 Automised Activated Powder

Net to net

3 Clear Waterbase Upto 5% of the FOB value of export

4 Adhesives in Liquid form Upto 5% of the FOB value of export

C1401 Heat Recovery Wheel - Model HRW - 600

5 Thinner Upto 5% of the FOB Value of export

1 No. 1 Seamless Tubes 1.02 kg/kg content in the export product

2 B Q plates 1.05 kg/kg content in the export product

3 Stainless Steel Plates 1.05 kg/kg content in the export product

4 Low Alloy Steel Plates 1.05 kg/kg content in the export product

C1402 Industrial Heat Exchanger (Shell and Tube/ Plate/Spiral Type)

5 MiscellaneousItems: a) Stainless Steel Welding Electodes b) Carbon Welding Electrodes

Upto 1% of the FOB value of export.

C265

1 pc. 1 Aluminium Tubes/ Pipes 1.05 kg/kg content in the export product

2 ABS Granules (Relevant Grade) 1.05 kg/kg content in the export product

3 Nylon Granules (Relevant Grade) 1.05 kg/kg content in the export product

C1403 Aluminium cops

4 CRCA Sheet 1.05 kg/kg. content in the export product.

1 No. 1 SAE 8602 Bar/ Round 1.20 kg/kg content in the export product


C1404 Nut & Shaft Assy. for Automobile

3 Steel Ball Net to Net

1 No. 1 Spring Steel Strip 1.05 kg/kg content in the export product

2 Bakelite insulating Strip 1.02 kg/kg content in the export product

3 Stainless Steel Strips 3gms.

4 Spring Steel Strips 13gms.

5 Rivet Contacts. Net to net


7 Copper Wire 1.02 kg/kg content in the export product

8 Insulating Bush Net to Net

9 Adjusting Screw. Net to net

10 G.F. Nylon 66 (for manufacture of bobbin).

7gms.

11 Glass Filled Nylon 66 1.05 kg/kg content in the export product

12 Hydrophonic Filter Net to net

C1405 Disc Horn

13 Nucleus 2 Nos.

1 kg. 1 Stainless Steel Coil of relevant grade (.3-.5 MM thickness)


2 Polyol 0.525 kg of PU content in the export product

3 Isocynate (MDI) 0.525 kg of PU content in the export product

C1406 Stainless Steel Casseroles of various designs (based on non CFC PU Insulation)

4 ABS (Acrilonitrile Butadine Styrene) Plastic


1 No. 1 Rare Earth Magnet (7 gm each) (Relevant diameters)

2 Nos.

2 Stainless Steel Casing 1 No.

3 M.S. Pole PCs (Centre) 1 No

C1407 Cow Magnets/ pill

4 M.S. Pole Pcs (Ends) 2 Nos.

1 Kg. 1 CRCA Non Alloy Steel Sheet/ Coil


2 H.R. Non Alloy Steel Sheet/ Coil 1.03 kg/kg content in the export product

C1408 Steel Cable Drum in various sizes

3 Non Alloy Steel Round Bar 1.02 kg/kg content in the export product

C266

1000 Kgs. 1 M.S. Scrap 1085 kgs.

2 Low Carbon Ferro Chrome Lumps

49.9 kgs.

C1409 Alloy Iron Powder Grade - FeCrMo (Cromaloy)

3 Low Carbon Ferro Molybdenum 8 kg

C1410 Carbon/ Aloy Steel Seamless Tubes/ Pipes (Cold Finished)

1 MT 1 Carbon/ Alloy Steel Pipes/ Tubes (Hot Finished) Grade: ASTM A192

1.075 MT

C1411 High Speed Steel (Non-Cobalt Grade) Tools Blanks (up to 15 mm dia)

1 kg. 1 H.R Rod/Wire Rod of High Speed Steel (Non-Cobalt Grade)


C1412 Deleted

C1413 Deleted

1 Kg. 1 Cold Rolled Steel Strips/ Sheets (Coated or Uncoated)


C1414 Lever Arch Mechanism (Index File Clip) with or without Slide-in Plate 2 MS Wire Rod 1.05 kg/kg content in

the export product

C1415 Cold Rolled Formed (Sections of Collapsible Gates)

1 MT 1 HR Coil 1.08 MT

1 Kg. 1 M.S. Scrap 880 gms C1416 Alloy Iron Powder Grade - FeCu 80:20 2 Oxygen Free High Conductivity

Copper Ingots / Cathodes /Billets / Scrap

220 gms

C1417 Deleted.

C1418 Cast Iron Castings (Mini blast Furnance and Cupola route)

1000 kgs. 1 Low Ash Metallurgical Coke (Ash contents below 15%)

495 kgs

1 Km. 1 Aluminium rod E.C. grade having 99.6% purity (min.)

2745 kg.

2 XLPE Compound 450 kg.

C1419 1 Core X 1000 Sq. mm 1.1 KV Grade Aluminium XLPE insulated cable 3 PVC Resin 205 kg.

C1420 Fine Cobalt Powder Grain size 0.5 - 2 Micron

1 kg. 1 Cobalt Granules/ Cobalt Briquettes/Cobalt Cathodes OR Cobalt Chloride Solution containing Cobalt Metal

1.04 kg. 1.04 Kg. of Cobalt contained in Cobalt Chloride Solution

1 kg. 1 Copper ingots OR Brass Scrap 1.05 kg/kg content

2 Spring Steel wire 1.02 kg/kg content

3 M.S. Wire/ Rod 1.10 kg/kg content

4 CRCA Sheet 1.20 kg/kg content

5 ABS Moulding 1.05 kg/kg content

C1421 Electrode Holder mainly made of Copper /Brass.

6 Silicon Rubber 1.05 kg/kg content

1 kg. 1 Cast Copper Rod (EC Grade) 1 kg.

2 Insulating Paper 7 gms

C1422 Copper Conductors (continuously transposed containing 5 to 31 enamelled strips) 3 High density kraft paper 4 gms

C1423 Aluminium bottles/ cans 1 MT 1 Aluminium Ingot 1.05 MT

1 kg. 1 Glass Rovings 0.520 kg C1424 Woven Asbestos Free Clutch Facings 2 Nitrile Rubber 0.207 kg

C267

3 Phenol Formaldehyde Resin (Powder Phenol Resin)

0.095 kg

4 Mangnesium Oxide 0.050 kg

5 Potassium Titanate 0.040 kg

6 Kevlar Dry Pulp 0.004 kg.

1 No. 1 Copper contact 1 No. C1425 Insulated Adjacent Jumpers (25A, 1.34 gms. weight)

2 Polyamide (6.6) Grey 1.08 gms.

1 No. 1 Wire Protect 2 Nos.

2 Contact Pin 2 Nos.

3 Screws 2 Nos.

C1426 G-DS Clamp Pole Grey

4 Polyamide (6.6) Gredy 1.18 gms.

1 km. 1 EC Grade Aluminium Rods/ Ingots

2297 kgs.

2 Insulating Grade XLPE Compound

1125 kgs

3 Semi Conducting Grade XPLE Compound

346 kgs.

C1427 Aluminium Conductor 1 Core X 630 Sq. mm 33 KV(E) ALXLPE PVC AWA PVC Cables

4 PVC Resin 685 kgs.


1296 kgs.


2104 kgs.


598 kgs.

C1428 Aluminium Conductor 3 Core X 150 Sq. mm 33 KV(E) ALXLPE PVC SAWA PVC Cables

4 PVC Resin 2255 kgs

1 km 1 EC Grade Aluminium Rods/ Ingots

2137 kgs.


2435 kgs.


685 kgs.

C1429 Aluminium Conductor 3 Core X 240 Sq.mm 33KV(E) ALXLPE PVC SAWA PVC Cables



735 kgs.


232 kgs.


121 kgs.

C1430 Aluminium Conductor 1 Core X 150 Sq. mm 11 KV(E) ALXLPE PVC AWA PVC Cables

4 PVC Resin 253 kgs


1618 kgs.


765 kgs.


402 kgs




712 kgs.


172 kgs

C1432 Aluminium Conductor 1 Core X 150 Sq. mm 6.6 KV(E) ALXLPE PVC AWA PVC Cable

3 Semi Conducting Grade XPLE 116 kgs.

C268

Compound 4 PVC Resin 239 kgs.


1296 kgs


527 kgs.


335 kgs.

C1433 Aluminium Conductor 3 Core X 150 Sq. mm 6.6 KV(E) ALXLPE PVC CSAWA PVC Cables



1618 kgs


571 kgs.


386 kgs

C1434 Aluminium Conductor 3 Core X 185 Sq. mm 6.6 KV(E) ALXLPE PVC SAWA PVC Cables


1 km. 1 EC Grade aluminium Rods/ Ingots

2137 kgs


636 kgs


430 kgs

C1435 Aluminium Conductor 3 Core X 240 Sq. mm. 6.6 KV(E) ALXLPE PVC SAWA PVC Cables



1050 kgs


487 kgs.

3 Semi Conducting Grade XPLE 329 kgs.

C1436 Aluminium Conductor 3 Core X 120 Sq. mm 6.6 KV(E) ALXLPE PVC CSAWA PVC Cables



2137 kgs


849 kgs


446 kgs.




831 kgs C1438 Aluminium Conductor 3 Core X 95 Sq. mm 1.1 KV ALPVC PVC SWA PVC Cables

2 PVC Resin 506 kgs


1050 kgs C1439 Aluminium Conductor 3 Core X 120 Sq. mm 1.1 KVAL PVC PVCSWA PVC Cables

2 PVC Resin 589 kgs


1296 kgs C1440 Aluminium Conductor 3 Core X 150 Sq. mm KV ALPVC PVCSWA PVC Cables

2 PVC Resin 703 kgs


1618 kgs C1441 Aluminium Conductor 3 Core X 185 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables

2 PVC Resin 835 kgs

C269






2 PVC Resin 648 kgs



2 PVC Resin 868 kgs



2 PVC Resin 668 kgs





1277 kgs C1447 Aluminium Conductor 1 Core X 300 Sq. mm 1.1 KV ALPVC PVC Cables 2 PVC Resin 460 kgs


1496 kgs. C1448 Aluminium Conductor 3.5 Core X 150 Sq. mm 1.1. KV ALPVC PVCSWA PVC Cables

2 PVC Resin 806 kgs


1895 kgs C1449 Aluminium Conductor 3.5 Core X 185 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables

2 PVC Resin 995 kgs








1249 kgs. C1452 Aluminium Conductor 3.5 Core X 120 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables

2 PVC Resin 687 kgs



2 PVC Resin 587 kgs


3960 kgs. C1454 Aluminium Conductor 3.5 Core X 400 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables


C270

1 No. 1 Base Plate 1 No.

2 Connection Contact incoming 2 Nos.

3 Connection Contact outgoing 2 Nos.

4 Intermediate Plate 1 No.

5 Pressure Plate 1 No.

6 Screw M7X46X7 1 No.

7 Arrestor 1 No.

8 Santoprene - 101-64 0.950 gm

9 Makrolan - 2805 Natural 0.450 gm

10 Crastin FR- 850 Natural 4.212 gms

C1455 DT Plus Module With Protection Insert with Test Contact with Arrestor and Gel

11 Makrolan - 6485 Green 3.510 gms

1 No. 1 Base Plate 1 No

2 Connection Contact incoming 2 Nos







9 Crastin FR - 850 Natural 4.212 gms

C1456 DT Plus Module with Protection Insert with Test Contact with Gel without Arrestor







6 Screw M7X7X46X7 1 No.

7 Santoprene - 101 -64 0.950 gm

C1457 DT Plus Module without Protection Insert with Test Contact with Gel




3 Connection Contact outgoing 2 No.




7 Arrestor 1 No.

8 ABS UV FR 1210 Black 71 gms



11 Crastin FR 850 - Natural 4.212 gms

C1458 DT Plus with Earth Plate and with modified cable entry with DT Plus Module, Protection Insert, Test Contact and Arrestor with Gel


C1459 1 No. 1 Base Plate 1 No.

C271



4 Intermediate Plate 1 No

5 Pressure Plate 1 No


7 ABS UV FR 1210 Black 71 gms


DT Plus without Earth Plate and modified cable entry with DT Plus Module with Protection Insert, Test Contact with Gel


1 No. 1 Base Plate 1 No.


3 Connection Contact outgoing 2 Nos

4 Intermediate Plate 1 No


6 Screw M7X46X7 1 No

7 Arrestor 1 No

8 Santoprene - 101 - 64 0.950 gms


10 Crastin FR 850 - Natural 4.212 gms

C1460 DT Plus Module with Protection Insert with Test Contact with Arrestor without Gel


1 No. 1 Relevant Ball/Taper Roller Bearing

Net to net

2 Non-Alloy Steel Sheet/ Plate 1.10 kg/ kg content in the export product

3 CRCA Sheet/ Coil (mm thick) 1.25 kg./ kg content in the export product

4 Zinc 1% of net wt. of item No. 3 above.

C1461 Castor Wheels

5 SBR/Natural Rubber/ Cast Iron (Depending on type or wheel)

1.05 kg./ kg content in the export product

1 No. 1 Ferrite Magnets 6 Nos.

2 HR (Non-alloy) Steel Sheet/ Coil 3.5 mm thickness

498 gms

C1462 Frame and Field Assembly for 1.5 KW Automobile Starter Motor 3 Spring Steel Sheet/ Coil (0.35

mm thick) 50 gms

C1463 Complete Bicycle Along with Deraileur System & Chains

1 No. 1 Deraileurs System & Chain 1 Set

C1464 Stainless Steel Interlock Hose/ Hose Assembly

1 MT 1 Stainless Steel Coil/ Sheet 1.25 MT

C1465 Stainless Steel Bellow/ Bellow Assembly

1 MT 1 Stainless Steel Coil/ Sheet 1.46 MT

C1466 Aluminium Grills Anodised

1 kg. 1 Aluminium Ingots 1.06 kg/kg content in the export product

1 kg. 1 Pig Iron 1.138 kg


C1467 Brake Drum made of Alloy Cast Iron (Rough Castings)

3 Ferro Alloys (Fe.Si., Fe.Mn., Fe.Cr.)

0.015 kg

C272

4 Metallurgical Coke 0.13 kg

5 Inoculant 25C & equivalent 0.004 kg

6 Paints & Rust Preventive Oil 0.010 kg

Note: In the case of Machined Castings the above quantities of import items at each Sl.No. 1 to 5 are to be multiplied by factors as given below: a) Less than 10 kg/piece - 1.36 b)10 kgs. to 100 kgs/ piece - 1.25

C1468 Stainless Steel Dye Springs made Out of AISI 316 or AISI 304

1 kg. 1 Stainless Steel Wire (AISI 316 or AISI 304) of relevant Diameter

1.02 kg

1 kg. 1 St.Steel Rod 1.02 kg/kg content in the export product

2 Polyacetal 1.15 kg/kg content in the export product

C1469 Cistern Side Inlet valve, Cistern Bottom Inlet Valve, Cistern Outflow Valves

3 Polypropylene 1.15 kg/kg content in the export product

C1470 Deleted.

C1471 Finished Cup (Component of Tapered Roller Bearing)

1000 Nos. 1 Forged/ Turned Outer Ring in unfinished condition (relevant size)

1100 Nos.

1 kg. 1 Carbon Steel plates of relevant Grade

1.05 kg C1472 Split Retaining Rings of Cabbon Steel (Galvanised) 2 Zinc 4% of the net weight

of Steel in the export product.

C1473 Split Retaining Rings of Stainless Steel in SS 516 or 340

1 kg. 1 Stainless Steel of relevant Grade 1.05 kg.

C1474 Deleted

C1475 Compressor Mounting Brackets/Hanger Brackets/ mounting Spring Brackets/ Overload Brackets

1 kg. 1 CRCA Sheet/ Coil (prime/ Defective)


C1476 Locating Cup/Muffler Assembly (Suction/ Discharge/ Shockloop Assy./ Protective Cover Bale Strap/ Discharge Valve retainer

1 kg 1 CRCA Sheet/ Coil (Prime/ Defective)


1 kg. 1 Copper Cathodes/ Copper Wire Bars OR Copper Scrap

0.875 kg 0.9026 kg

C1477 Phosphor Copper

2 White/ Yellow Phosphorous 0.154 kg

1 kg. 1 Copper Cathodes/ Copper Wire Bars OR Copper Scrap

0.707 kg 0.735 kg

C1478 Manganese Copper

2 Manganese 0.303 kg

1 kg. 1 Primary Unalloyed C1479 Alloy Aluminium Conductor Steel a) Aluminium 1.02 kg/kg content in

C273

the export product


c) Silicon OR


Aluminium Alloy Ingots / Billets / T-Bars/ Sows/ Wire Rods


2 High Carbon Steel Wire/ Rod 1.02 kg/kg content in the export product

Reinforced (AACSR)

3 Zinc 4% of the weight of Steel Content

1 No. 1 Washer - P Net to Net

2 Belt. V Net to net

3 Door SW ASM Net to Net

4 Buzzer ASM Net to net

5 Capacitor Net to net

6 Gear Case Assembly Net to net

7 Plunger Valve Strap Net to net

8 Timers Net to Net

9 Block Brake Net to net

10 Motors (Relevant) Net to net

11 P.V. Bellow Net to Net

12 Net Net to net

13 Bellows ASM Net to net

14 Powder Cord Net to net

15 Adapter Net to net

16 Polypropylene Resin OR


16 Expanded Polysterene 1.02 kg/kg content in the export product

17 Resin ABS 1.04 Kg/Kg content in export product

18 Galvanized Precoated Steel Sheet As per general note for packing material

19 High Impact Polystyrene 1.04 Kg/Kg content in export product

20 Aluminium Ingots 1.04 Kg/Kg content in export product

21 Styrene Acrylo Nitrile 1.04 Kg/Kg content in export product

22 Polyethylene Resin 1.04 Kg/Kg content in export product

23 Ethylene Vinyl Acetate 1.04 Kg/Kg content in export product

24 Polyacetal GC25 1.04 Kg/Kg content in export product

25 Polyester band Net to net

26 Nylon Cloth for Capicitor Cover Net to net

27 S.S. Sheet for flat spring Net to net

C1480 Washing Machine

28 Relevant insulated Copper Wire 0.5 mm dia

1.01 metre/ metre content in export

C274

product

29 Relevant grease 4 gms/machine

30 Other relevant Components As per General Note No. 4 of Engineering Group

31 Expanded Polysterene 1.02 Kgs/Kg content in the export product

1 No. 1 Nickel Fibremat Fibrex OR Nickel Powder

40.00 Sq. ft. 4.48 kgs.

2 Nylon moulding granules/ powder

4.10 kgs.

3 Nonwoven Separator (Viledon) FS 2115

18.00 sq. mtr

4 NIckel Powder type 255/287/210 4.00 kgs

5 5 Celgard ® 3400 Flat Sheet/Film.

16.00 sq. mtr.

6 Battery connector 1 No.

7 Metregrip 303 LV epoxy adhesive activator

0.50 ltrs.

C1481 Battery Type NCSP-B-40600D (Nickel Cadmium batteries) 24 Volts, 40 AH.

8 Metregrip 303 LV Epoxy Adhesive base

0.50 ltrs.

1 No. 1 Valve Assembly & Case One No. Each on net to net basis

2 Valve Case Cover

3 Valve

4 Valve Case Spacer

5 Retainer latch

6 Bushing Latch

7 Back Head Complete

8 Throttle Lever

9 Front Head

10 Front Head Spring

11 Front Head Bold

12 Retainer Latch Pin (outer)

13 Air Inlet Nut

14 Anvil Block

15 Anvil Block Bushing

16 Piston

17 Back Head Bolt

18 Air Inlet Swivel

19 Cyliner

C1482 Pneumatic Demolition Tool

20 Retainer Latch Pin (inner)

1 No. 1 Throttle Valve One No. each on net to net basis.

2 Throttle Valve Tube

3 Bushing Permanent

C1483 Pneumatic Tools Chipper - 1" to 4" Cylinder

4 Throttle Lever

C275

5 Handle

6 Upper Valve case Lid

7 Valve Case

8 Piston

9 Cylinder

10 Retainer

11 Bushing-Round/ Hex

12 Collar Lock

13 Exhaust Shield

3x240 Sq. mm

1 Al. Ingot/ Rod 2.024 kg. per m

2 PVC Resin 1.053 kg. per m

C1484 ALPVCP VCSWP VC(1.1 kv)

3 DIDP .3786 kg. per m

1x150 Sq. mm

1 Aluminium Ingot/ Rod 0.426 kg. per m


C1485 ALPVCSWPVC (1.1 kv)


3.5x95 Sq. mm

1 Al. Ingot/ Rod 0.970 kg. per m


C1486 ALPVCPVCSWP VC(1.1 kv)


1 No. 1 HR Plate/ HR Plate in coil form 1.20 kg/kg content in the export prouct.

2 HR Sections 1.09 kg/kg content in the export prouct.

3 Billet 1.20 kg/kg content in the export prouct.

4 Paint

5 Thinner

6 Welding wire

C1487 Earth Moving Wheels having dia not less then 25"

7 Flux

Note: 1. CIF value of Import item No. 4&5 taken together shall be restricted to 3% of FOB vaslue of export. 2. Quantity of import item No. 6&7 taken together limited to 3% of weight of Steel to be welded.

C1488 Deleted

1 kg. 1 H.R. Steel Plates/Coils (8 mm to 15 mm)


C1489 Rear Axle Housing Assembly for LCV/HCV

2 Forgings (Machined) OR Forgings (Rough) OR Non alloy/alloy steel bars/rods/billets/blooms/ingots.

Net to net or 1.47Kg/Kg content in the export product Or 1.70Kg/Kg content in the export product.

1 MT 1 Seamless Steel/ ERW tubes or pipes


C1490 Finned Tubes

2 CRSS/HRSS/ CRCS/ HRCS strips or coils

1.125 MT/ MT content in the export product.

C1491 1 kg. 1 Iron Powder Atomised 0.470 kg

C276

2 Copper Mill Scale 0.580 kg

3 Solid Lubricant Powder 0.0106 kg.

Sintered Bronze Bushes & Part EP Grade

4 Lubricating Oil 0.0403 kg.

1 MT 1 Hot Rolled Silicon Electrical Steel Wide Coils of relevant Grade containing 2.5% - 3.5% Silicon

1180 kgs.

2 Mgo Powder for coating 4.2 kgs.

3 IN-Organic Coating (Remisol coating liquid/ corrosive liquid)

10 kgs.

4 Picking Oil 0.5 kg.

5 Steel Strapping As per packing policy

C1492 Cold Rolled Grain Oriented Silicon Electrical Steel Sheets/ Coils

6 VCI Rusto paper As per packing policy

1 No. 1 Relevant Ball Bearing 4 Nos.

2 Relevant Chain Link 1 No.

3 Relevant Cap Brake 1 No

4 Frame 1 No.

5 Gear Internal 1 No.

6 Liner 1 No.

7 Motor Housing 1 No.

8 Muffler 1 No.

9 Retainer Body 1 No.

10 Shaft-Sprocket 1 No.

11 Shaft-Rotor 1 No.

12 Sprocket (4 pocket) 1 No.

13 Washer 1 No.

C1493 Pneumatic Tool (Air Hoists) upto 1000 kg. lifting capacity

14 Sprocket (6 pockets) 1 No.

Note: (i) Import item at Sl.No. 14 shall be allowed only if export products has a lifting capacity of (501-1000 Kgs).(ii) Import shall be permitted on net to net basis with accountability clause.

1 No. 1 Relevant Throttle Valve One No. each (with accountability clause). On net to net basis

2 Relevant Throttle Valve tube

3 Relevant Bushing permanent

4 Relevant Lever Throttle

5 Relevant Lid-Upper Valve case

6 Relevant Case Valve

7 Relevant Lid lower valve case

8 Relevant Collar Lock

9 Relevant Exhaust Shield

10 Relevant Handle

11 Relevant Retainer (Chisel sleeve)

12 Relevant Cylinder (Chrome Lined Bore)

C1494 Pneumatic chipper with cylinder Bore Chrome Lined 1" to 4" Cylinder

13 Relevant Piston

C277

1 No. 1 Relevant Chain Load 1 No.

2 Relevant Guide- Chain 1 No.

3 Relevant Handle 1 No.

4 Relevant Motor Housing 1 No

5 Relevant Limit Stop 1 No

6 Relevant Cover Worm Gear 1 No.

7 Relevant Cover Motor 1 No.

8 Relevant Cover Spur Gear 1 No.

9 Relevant Yoke 1 No.

10 Relevant End Plate Upper 1 No.

11 Relevant End Plate Lower 1 No.

12 Relevant Liner 1 No.

13 Relevant Self Lubricanting Bush 2 Nos.

14 Relevant Chain Handle 1 No.


16 Relevant Worm 1 No.

17 Relevant Worm Gear 1 No.

18 Relevant Throttle Lever 3 Nos.

19 Relevant Gasket 7 Nos.

20 Relevant Strainer Air 1 No

21 Relevant Muffler 1 No.

22 Relevant Suspension Bail 1 No.

23 Relevant Hose Clamp 3 Nos.

24 Relevant Needle Bearing 2 No.

25 Relevant Ball Bearing 6 Nos.

C1495 Pneumatic Tool Heavy Duty Air Hoist - Rated Capacity above 909 kg. (2000 pounds) up to and including 1818 kg. (4000 pounds).

26 Relevant Block Assembly Bott. 1 No.

1 No. 1 Relevant Chain Load 1 No.

2 Relevant Guide- Chain 1 No.

3 Relevant Motor Housing 1 No.

4 Relevant Limit Stop 1 No.

5 Relevant Chain Guide 1 No.

6 Relevant Valve Housing 1 No.

7 Relevant Cover Worm Gearing 1 No.

8 Relevant Cover Motor Hook 1 No.

9 Relevant Cover Spur Gearing 1 No.

10 Relevant End Plate Upper 1 No.

11 Relevant End Plate Lowder 1 No.

12 Relevant Liner 1 No.

13 Relevant Valve Throttle 1 No.

14 Relevant Self Lubricating Bush 2 Nos.

15 Relevant Hook (Bare) 1 No.

C1496 Pneumatic Tool Heavy Duty Air Hoist - Rated Capacity above 455 kg. (1000 pounds) upto and including 909 kg. (2000 pounds).

16 Relevant hook Bare 1 No.

C278

17 Relevant Chain Handle 1 No.


19 Relevant Worm 1 No.

20 Relevant Work Gear 1 No.

21 Relevant Throttle Lever 2 Nos.

22 Relevant Gasket 7 Nos.

23 Relevant Strainer Air 1 No.

24 Relevant Muffler 1 No.

25 Relevant Needle Bearing 2 Nos.

26 Relevant Ball Bearing 7 Nos.

1 No. 1 Relevant Cap Cylinder 1 No.

2 Relevant Piston & Carbide tip assembly

3 Nos.

3 Relevant Cylinder 1 No.

4 Relevant Handle Bent 1 No.

5 Relevant Handle Cylinder 1 No.

6 Relevant Bushing Cylinder 3 Nos.

7 Relevant Bushing Reducer 1 No.

8 Relevant Throttle Valve Lever 1 No.

9 Relevant Throttle Valve Body 1 No.

10 Relevant Throttle Valve 1 No.

C1497 Pneumatic Tool Scabbler with 3000 BPM (Blows per minute)

11 Relevant Air Strainer 1 No.

1 No. 1 Relevant Air Inlet Bushing 1 No.

2 Relevant Throttle Valve Bushing 1 No.

3 Relevant Throttle Lever 1 No.

4 Relevant Pipe Plug 1 No.

5 Relevant Handle (Bare) 1 No.

6 Relevant Through Bolt 2 Nos.

7 Relevant Air Tube comp 1 No.

8 Relevant Cylinder bush 1 No.


10 Relevant Piston 1 No.

11 Relevant Front Valve seat 1 No.

12 Relevant Valve 1 No.

13 Relevant Rear Valve seat 1 No.

14 Relevant wire retainer 1 No.

15 Relevant front head 1 No.

16 Relevant Chuck 7/8" hex 1 No.

17 Relevant Chuck Sleeve 1 No.

18 Relevant Plunger shifter 1 No.

19 Relevant Ratchet ring 1 No.

20 Relevant Pawl 2 Nos.

C1498 Pneumatic Tool Hand Drill with Drilling Diameter upto 1-1/4" (one and a quarter inch) with muffler

21 Relevant Shifter Sleeve 1 No.

C279

22 Relevant Muffler complete 1 No.

1 No. 1 Relevant Piston & Carbide tip assembly

3 Nos.


3 Relevant Live air Handle 1 No.


5 Relevant Air Inlet Nipple 1 No.

C1499 Pneumatic Tool Scabbler with 2900 BPM (Blows per Minute) per piston.

6 Relevant Dead handle 1 No.

1 Relevant Air Inlet Bushing 1 No.


3 Relevant Throttle Lever 1 No.

4 Relevant Pipe Plug 1 No.

5 Relevant Handle (Bare) 1 No.

6 Relevant Through Bolt 2 Nos.

7 Relevant Air tube comp 1 No.

8 Relevant Cylinder bush 1 No.



11 Relevant Front Valve seat 1 No.


13 Relevant Rear Valve seat 1 No.

14 Relevant wire retainer 1 No.

15 Relevant front head 1 No.

16 Relevant Chuck 7/8" hex 1 No.

17 Relevant Chuck Sleeve 1 No.

18 Relevant Plunger shifter 1 No.

19 Relevant Ratchet ring 1 No.

20 Relevant Pawl 2 Nos.

21 Relevant Shifter Sleeve 1 No.

C1500 Pneumatic Tool Hand Drill with Drilling Diameter upto 1-1/4" (one and a quarter inch) without muffler

22 Relevant Hose tail 1 No.

C1501 Low Carbon Ferro Manganese

1 MT 1 Aluminium Ingot/ Aluminium Powder

500 kgs.

C1502 Medium Carbon Ferro Manganese

1 MT 1 Aluminium Ingot/ Aluminium Powder

250 kgs.

C1503 Continuous cast copper rod/copper wire rod/cathode

1 MT 1 Copper Concentrate 1.06 MT Copper content in Copper Concentrate/ MT of export product.

1000 kg. 1 Hot Rolled Silicon Electrical Steel Wide Coils of relevant grade containing 0.60% to 3.4% Silicon with varying quantity of Aluminium

1125 kg

2 Organic Coating/ Inorganic Coating

5 kgs.

3 Pickling Oil 0.5 kg.

C1504 Cold Rolled Non Grain oriented Silicon electrical Steel Sheet/ Coils in fully/ semi processed state

4 Steel Stripping As per packing

C280

Policy

5 VCI Rusto paper As per packing policy

6 Cold Rolling Mill Rolls 1.00 kg

7 Mineral Based Rolling Oil 0.35 kg

Note: Import item No.2 will not be allowed if export product is CRNO in Semi processed state.

1 No. 1 Relevant Valve Plate 1 No.

2 Relevant Gas Pump assembly 1 No.

3 Crankshaft Assembly 1 No.

4 Suction Valve 1 No.

5 Discharge Valve 1 No.

6 Cylinder Head 1 No.

7 Stator 1 No.

8 PTC Relay below 7 AMP 1 No.

C1505 Hermatic Compressor

9 Bi-metal thermostat/ motor protector

1 No.

1 Kg. 1 Forging Quality Carbon Steel/ Non Alloy Steel Bars/ Rods/ Billets/ Blooms/ Ingots (Relevant Material)


2 Chemicals Rust Preventing Oil/ Primer/ Paints

2% of the FOB value of export

C1506 Identifiable ready-to-use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified

3 Misc.items: Refractory material, Die Steel/ Die Blocks, Cutting Tools, Cutters Sawing Blades including bimetallic Bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil and lubricants


1 kg. 1 Forging Quality/ Alloy Steel/ Stainless Steel Bars/ Rods/ Billets/ Blooms/ Ingots (Relevant Material)


2 Chemicals: Rust Preventing Oil/Primer Paints

2% of the FOB value of exports.

C1507 Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified

3 Misc. Items: Refractory material, Die Steel/ Die Blocks Cutting Tools, Cutters, Sawing Blades including bimetallic Bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil and lubricants.


C1508 Identifiable ready to use machined parts/ components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through casting process, not elsewhere specified

1 kg 1 Pig Iron 1.25 kg.

Note: The above norms are for the export product wholly made of Pig iron. For the export product constituting Pig Iron less than 100% and upto 90% by weight, the import requirement of Pig iron shall be proportionately reduced.

C1509 Identifiable ready to use machined parts/

1 MT 1 Major Raw materials comprising of Carbon Steel/ Non-Alloy Steel

1700 kgs.

C281

Melting Scrap

2 Additives comprising of: 50 kgs.

a) Core Wire/ Scrap/ Ingots/ Shots of Aluminium b) Core Wire/ Lumps Powder of Calcium Silicide (CaSi) c) Lumps/ Powder of Misch Metall d) Ferro Silicon e) Ferro Manganese


a) i)Resin Coated Sand ii) Organic binders

450 kgs 200 kgs.

b) i) Graphite electrode ii)Welding Electrode iii) Mould Wash/ Mould coat iv) Grinding Wheel v) Refractories:

7.5 kgs 12.5 kgs 31 kgs 6kgs 37.5 kgs

a) Porous Plugs/ Seat Blocks/ Sleevers/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks


9440 Sq. Cm.

components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified

4 Furnace Oil/ Diesel Oil for i) Ladle heating ii) Moulding Heating iii) Heat Treatment

265 Ltrs.

1. The above norm is applicable only if the export products are manufactured through electric Arc Furnace/ Induction Finance Route using melting Scrap as Shown at item No. 1(a)2. In case the products are manufactured through the Induction Furnace route,item 3(b)(i) will not be allowed 3. The above norms are for the export product wholly made of Non Alloy Steel. For the export product constituting less than 100% and upto 90% Non Alloy Steel by weight,the import requirements of import items at S.No. 1 to 3 shall be proportionately reduced.

1 MT 1 Major Raw Materials comprising of:

a) Non-Alloy Steel Melting Scrap 1594 kgs

b) Ferro Alloys comprising of: i) Charge Ferro Nickel/ Nickel Oxide Sinter OR

75 kgs

Nickel ii) Ferro Chrome iii) Ferro Manganese iv)Ferro Molybdenum v) Ferro Silicon

30 kgs 21 kgs 25 kgs 31 kgs 25 kgs

2 Additives comprising of: a) Core wire/ Scrap/ Ingots/ shots of Aluminium b) Calcium silicide (CaSi) c) Selenium d) Lumps/ Powder of Misch Metal

6 kg

3 Miscellaneous items

C1510 Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified

a) i) Resin coated Sand ii) Organic binders

450 kgs 200 kgs

C282

b) i) Graphite Electrode ii) Welding electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories

7.5 kgs. 12.5 kgs 31 kgs 6 kgs 37.5 kgs

a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks

vi) Industrial X-Ray Film (various Grades for Gamma Rays Iridium 192 & Cobalt 60)

9440 Sq. Cm.

4 Furnace Oil/ Diesel Oil for i) Ladle Heating ii) Mould Heating iii) Heat treatment

265 Ltrs.

1 MT 1 Major Raw Materials comprising of:

a) Stainless Steel Melting Scrap 862.5 kgs

b) Iron Flakes/ Pure Iron/ Iron Powder

387.5 kgs

c) i) Ferro Chrome ii)Charge Nickel Oxide Sinter/ Ferro Nickel OR

400 kgs

c)i) Ferro Chrome ii)Nickel iii) Ferro Manganese iv)Ferro Molybdenum v) Ferro Silicon

87.5 kgs 125.0 kgs 12.5 kgs 62.5 kgs 25 kgs

2 Additives comprising of : a) Core wire/ Scrap/ Ingots/ Shots of Aluminium b)Core wire/ Ingots/ powder of CalciumSilicide(CaSi) c) Selenium d) Lumps/ Powder of Misch Metal

6.25 kgs.


a) i) Resin coated Sand ii)Organic binders

1562.5 kgs 200 kgs

b) i) Graphite Electrode ii) Welding electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories

7.5 kgs 12.5 kgs 31.25 kgs 6.25 kgs 37.5 kgs

a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates b) Direct Bonded Basis Bricks c)Monolithic/ Gunning/ ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks

vi) Industrial X-Ray Film (various Grades for Gamma Rays Iridium 192 & Cobalt 60)

9440 sq. cm

C1511 Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified

4 Furnace Oil/ Diesel Oil for i) Ladle Heating ii) Mould Heating iii) Heat Treatment

265 Ltr.

C283

Note: The above norm is applicable only if the export product are manufactured through Electric Arc Furnace/ Induction furnace Route using Melting Scrap as shown at item No. 1(a)2. In case the products are manufactured through the induction Furnace route,item 3(b)(i) will not be allowed. 3. The above norms are for the export product wholly made of Stainless Steel. For the export product constituting Stainless Steel less than 100% and upto 90% by weight, the input requirements of import items a. No. 1 to 3 shall be proportionately, reduced.

1 No. 1 Electro Galvanised Steel sheets pre-painted 0.5 mm thick


2 Relevamt Stainless steel sheet 0.4 mm thick


3 ABS/HIF with GPPS (General Purposel poly sheets)


4 Polyurethane foam chemical total foam weight:-

a) Polyol b) Isocyanate c) Cyclo-pentane

1.03 kg/kg content in the export product 1.03 kg/kg content in the export product 1.03 kg/kg content in the export product

5 Relevant Hermetically sealed compressors

One set (Net to Net)

6 Relevant Fan Motors a)Evaporator cooling b) Compressor/ condensor cooling

On net to net basis On net to net basis

7 Relevant thermostate 1 No.

8 Copper tube 6.350x0.6 mm thick 1.03 kg/kg content in export product

9 Copper capillary tube 1.03 kg/kg content in the export product

10 Relevant Filter Drier (Copper) 1 No.

11 Relevant Evaporator (cu tube, Al fin)

1 No.

C1512 Refrigerator Display Cabinet (Capacity to be Indicated)

12 Relevant Condensor (cu tube, Al fin)

1 No.

1 No. 1 Relevant Air Inlet Nipple 1 No.

2 Relevant Head Bolt 1 No.



5 Relevant Fronthead 1 No.


7 Relevant Latch Retainer Bolt 1 No.

8 Relevant Valve Block 1 No.


10 Relevant Chuck bushing 1 No.

11 Relevant Retainer-Latch 1 No.

12 Relevant Lever - Throttle Valve 1 No.

C1513 Pneumatic Tool-Clay Digger (Picks) with outside Trigger, Throttle Latch Retainer

13 Relevant Handle Assembly 1 No.

C284

14 Relevant Latch Ret Bolt Bushing

1 No 1 Relevant Elbow 1 No.


3 Relevant throttle valve Lever 1 No.

4 Relevant throttle valve Body 1 No.

5 Relevant throttle Valve 1 No.

6 Relevant Nipple 1 No.

7 Relevant Cylinder Head Assembly

1 No.

8 Relevant Oil Regulating Plug 1 No.

9 Relevant Upper Valve case Lid 1 No.

10 Relevant Valve case 1 No.

11 Relevant Lower Valve case lid 1 No.

12 Relevant Exhaust Deflector 1 No.

13 Relevant Piston with Plug Assembly

1 No.


15 Relevant Retainer Nut 1 No.

16 Relevant Retainer 1 No.

17 Relevant Piston Rod Bushing 1 No.

18 Relevant Piston PKG 1 No.

19 Relevant Piston Bushing 1 No.

20 Relevant aluminium Butt 1 No.

C1514 Pneumatic Tool-Light Simplate Valve Temper with Bore and Stroke size 1 7/16"X6" (36.5 mm X 152.45 mm)

21 Relevant Lock nut 1 No.

1 No. 1 Relevant Streat Elbow 1 No.


3 Relevant Throttle Valve Lever 1 No.

4 Relevant Throttle Valve Body 1 No.

5 Relevant throttle Valve 1 No.

6 Relevant Nipple 1 No.

7 Relevant Cylinder Head Assembly

1 No.

8 Relevant Valve Lid 1 No.


10 Relevant valve Box 1 No.

11 Relevant Lock Clip 1 No.

12 Relevant Exhaust Clip 1 No.

13 Relevant Piston with Plug Assembly

1 No.

14 Relevant Cylinder & Bushing Assembly

1 No.

15 Relevant Piston Packing 1 No.

16 Relevant Lock Clip 1 No.

17 Relevant Piston Gland nut 1 No.

C1515 Pneumatic Tool Heavy duty Ring volve Temper with Bore and Stroke size upto 2 1/4" X 6" (two and quarter inch X six inch) (57.2 mm X 152 mm)

18 Relevant Piston Gland Sleeve 1 No.

C285

19 Relevant Butt 1 No.

20 Relevant Lock Nut 1 No.

1 No 1 Relevant Valve 1 No.

2 Relevant Throttle valve lever 1 No.


4 Relevant Cylinder Head 1 No.

5 Relevant Upper Valve Case Lid 1 No.

6 Relevant Valve Case 1 No.

7 Relevant Lower Valve Case Lid 1 No.

8 Relevant Piston & Plug Assembly

1 No.


1 No.

10 Relevant Bushing 1 No.

11 Relevant Piston Packing 1 No.

12 Relevant Piston Bushing 1 No.

13 Relevant Check Nut 1 No.

14 Relevant retainer 1 No.

C1516 Pneumatic Tool Rammer

15 Relevant Rubber Butt 1 No.

1 No. 1 Relevant Cylinder 1 No.

2 Relevant Sleeve 1 No.

3 Relevant Handle & Bush Assembly

1 No.

4 Relevant Lever 1 No.

5 Relevant Lever Pin 1 No.


7 Relevant Retainer sleeve 1 No.



10 Relevant Upper Valve Case Lid 1 No.

11 Relevant Lower Valve Case Lid 1 No.


C1517 Pneumatic Tool Clay Digger round (picks) with outside trigger Sleeve Retainer and round/ Square Chuck

13 Relevant Back Head Bolt 2 Nos.

1 No. 1 Bronze Metal 0.155 kg/HP

2 C.I. Casting OR Pig Iron

0.86 kg/HP 1.12 kg/HP

3 ERWSS Tube/ Rod Grade AISI 304/ 316/ 431

1 kg/HP

C1518 Submerssible Water Pump of various Horse Powers (HP)

4 Relevant Rubber/ Plastic Parts Net to Net

1 No. 1 Copper Rod/ Winding Wire or Copper Wire Bar

0.475 kg/HP C1519 Submerssible Water Motor of various Horse Powers (HP) 2 Stampings

OR CRNGO Steel Sheet/ Coil/ Strips

1.47 kg/HP 2.62 kg/HP

C1520 Auto Transformers 1 No. 1 CRGO steel laminations/ Sheets/ Coils/ Slits/ Cuts

2.11 kg. per KVA

C286

2 Copper winding wires/ Strips/ Wire bars/ Wire Rods/ Cathodes

0.77 kg per KVA

3 Carbon in brushes/ Blocks/ Roller

5.0 Cub. Cm. per KVA


(Variable Voltage) (b) Above 30 KVA I phase or 90 KVA 3 phase and upto 130 KVA I phase or 390 KVA 3 phase

5 Servo Motor Magnets for Motors Net to net

1 kg 1 CRGO Steel laminations/ Sheets/ Coil/ Slits/ Cuts

1.71 kg per KVA

2 Copper winding wires/ strips/ Wire bars/ Wire Rods/ Cathodes

0.6 kg per KVA

3 Carbon in brushes/ Blocks/ Rollers

5.0 Cub.Cm. per KVA


C1521 Auto Transformers (Variable Voltage) (c) Above 130 KVA I phase or 390 3 phase

5 Servo Motor Magnets for Motors Net to net

1 No. 1 Relevant Bearing Ball 1No.

2 Relevant Gear Worm 1No

3 Relevant Shaft-Worm Gear 1No.

4 Relevant Retainer ball (thrust) 1No

5 Relevant Race Retainer 1No

6 Relevant Ball Race 1No.

7 Relevant Worm 1No

8 Relevant Ball Bearing 1No

9 Relevant Guide Plate 1No.

10 Relevant Stop Shield 1No.

11 Relevant Housing Cable Drum 1No.

12 Relevant Stop Assembly 1No.

13 Relevant Hook Assembly Swivel 1No

14 Relevant Housing Cover 1No.

15 Relevant Cover 1No.

16 Relevant Hub-main Spring 2No.

17 Relevant Asembly main spring and retainer

2No.

18 Relevant Hook 1No.

19 Relevant Cable 1No.

20 Relevant Clamp Cable 1No.

21 Relevant Separator Plate 1No.


C1522 Pneumatic Tool-Balancer with balance Capacity above 75 1b (34.1Kg) upto and including 210 1b (95.5Kg)

23 Relevant main spring anchor 1No.

1 No. 1 Relevant Cylinder 1No.

2 Relevant Sleeve 1No.

3 Relevant Retainer Latch 1 No.

4 Relevant Latch Bushing 1No.


1No.

6 Relevant Lever Chit 1No.

C1523 Pneumatic Tool-Clay Digger/Utility Hammer (picks) Latch Retainer with Chuck 7/8"hex X 3 1/4" (22.2mm X 82.6mm) without muffler.

7 Relevant Lever Pin 1No.

C287

8 Relevant Throttle Valve 1No.

9 Relevant Retainer Latch Pin 1No.

10 Relevant Valve 1No.

11 Relevant Piston 1No

12 Relevant Upper Valve case Lid 1No.

13 Relevant Lower Valve case Lid 1No.

14 Relevant Valve case 1No.

15 Relevant Back Head Bolt 2Nos.

1 No. 1 Relevant Cylinder 1No.


3 Relevant Retiner Latch 1No.

4 Relevant Latch Bushing. 1No.


1No.

6 Relevant Lever Chit 1No.

7 Relevant Lever Pin 1No.


9 Relevant Retainer Latch Pin 1No.


11 Relevant Piston 1No.

12 Relevant Upper Valve case Lid 1 No.

13 Relevant Lower Valve case Lid 1No.


15 Relevant Back head Bolt 2Nos.

C1524 Pneumatic Tool-Clay Digger/Utility Hammer (Picks) Latch Retainer with Chuck 7/8"hex X 3 1/4" (22.2 mm X 82.6 mm) with muffler.

16 Relevant Hook Muffler complete 1 No.

1No. 1 Relevant Main Spring Anchor 1No.

2 Relevant Bearing Ball 1No.

3 Relevant Drum Cable Assembly 1No.

4 Relevant Gear Worm 1No.

5 Relevant Shaft-Worm Gear 1No.

6 Relevant Retainer Ball (Thrust) 1No.

7 Relevant Race Retainer 1No.

8 Relevant Ball race 1No.

9 Relevant Worm 1No.

10 Relevant ball Bearing 1No.

11 Relevant Guide Plate 1No.

12 Relevant Stop Shield 1No.


14 Relevant Stop Assembly 1No.

15 Relevant Hook Assembly Swivel 1No.

16 Relevant Cover 2Nos.

17 Relevant Hub-Main spring 1No.

C1525 Pneumatic Tool-Balancer with balance capacity upto 75 1b (34.1Kg)

18 Relevant Assembly main spring 1No.

C288

and retainer

19 Relevant Hook 1No.

20 Relevant Cable 1No.

21 Relevant Clamp Cable 1No.

22 Relevant Latch 1No.

1No. 1 Relevant Air Handle Cap 1No.


3 Relevant Live Air Handle Sleeve 1No.

4 Relevant Governor Plunger 1No.

5 Relevant Governor Stop Pin 1No.

6 Relevant Governor Bushing 1No.

7 Relevant Governor Weight 2Nos.

8 Relevant Governor Body 1No.

9 Relevant governor pin 1No.

10 Relevant Reverse Sleeve 1No.

11 Relevant Ball Bearing 2Nos.

12 Relevant Dead Handle 1No.

13 Relevant Universal Joint 1No.

14 Relevant Round Plug 1No.

15 Relevant Ball Bearing 1No.

16 Relevant Liner 1No.

17 Relevant Rotor 1No.

18 Relevant Spindle Collar 1No.

19 Relevant End Plate 1No.

20 Relevant Spindle Gear 1No.

21 Relevant Gear Case 1No.

22 Relevant Collar 1No.

23 Relevant Gear Pinion 1No.

24 Relevant Ball Bearing 2Nos.

25 Relevant Sleeve 1No

26 Relevant Oil regulating Plug 1No.

27 Relevant Dowel 1No.

28 Relevant Muffler Cover 1No.

29 Relevnt Feed Post 1No.

30 Relevant Bearing 1No.

31 Relevant Feed Sleeve Handle 1No.

32 Relevant Transfer Plate 1No.

33 Relevant Cylinder Cap 1No.

34 Relevant spindle 1No.

35 Relevant Feed Sleeve Centre 1No.

36 Relevant Feed Sleeve 1No.

C1526 Pneumatic Tool-Reversible Drill with the speed of 350 R.P.M. and above upto including 750 R.P.M.

37 Relevant Socket Shank 1No.

C289

38 Relevant Dowel 3Nos.


1No.

40 Relevant Live Air Handle Stem & Bush

1No.

1No. 1 Relevant Cap 1No.


3 Relevant Live Air Handle Sleeve 1No.

4 Relevant Adaptor Flange 1No.

5 Relevant Governor Bushing 1No.

6 Relevant Governor Weight 2No.


8 Relevnt Governor pin 1No.

9 Relevnt Cylinder 1No.





14 Relevant Throttle Roller Protector

1No.

15 Relevant Cylinder Liner 1No.


17 Relevant Spindle Collar 1No.

18 Relevant End plate 1No.


20 Relevant Gear Case 1No.


22 Relevant Gear Pinion 1No.


24 Relevant Spindle 1No.

25 Relevant Bearing 1No.

26 Relevant Transfer plate 1No.

27 Relevant Cylinder Cap 1No.

28 Relevant Governor Stop Pin 1No.

29 Relevant G Plunger 1No.



C1527 Pneumatic Tool-Non Reversible Drill with the speed of 350 RPM and above upto and including 750RPM.

32 Relevant Stem & Bushing Assembly

1No.

1No. 1 Relevant Centre 1No.

2 Relevant Bushing 1No.


4 Relevant Feed Post 1No.

C1528 Pneumatic Tool-Reversible Drill with the speed above 100RPM upto and including 350RPM


C290

6 Relevant Liner 1No.

7 Relevant Rotor Housing Assembly

1No.

8 Relevant Plate 1No.



11 Relevant Gear case Assembly 1No.



14 Relevant Gear Stud 1No.

15 Relevant ball Bearing 1No.

16 Relevant Valve Cage 1No.

17 Relevant Valve Pin 1No.

18 Relevant Bearing Clamp Nut 1No.

19 Relevant Governor Lever 1No.


21 Relevant Governor Push Pin 1No.


23 Relevant Nut 1No.

24 Relevnt Governor Weight 2No.

25 Relevant Muffler 1No.

26 Relevant Transfer Plate 1No.


28 Relevant Roller Race 1No.

29 Relevant Roller Bearing Assembly

1No.

30 Relevant Retainer Washer 2 Nos.

31 Relevant packing Nut 1 No.

32 Relevant extractor pin 1 No.

33 Relevant gear pinion 1 No.

34 Relevant internal gear 1 No.

35 Relevant ball bearing 2 No.


37 Relevant dead handle 1No.

38 Relevant live air handle stem assembly

1 No.


40 Relevant set screw 1 No.

41 Relevant throttle valve 1 No.

42 Relevant throttle cap 1 No.

43 Relvant seat 1 No.

44 Relevant universal joint 1 No.


46 Relevant retainer sleeve 1No.

C291

47 Relevant protection sleeve 1 No.

48 Relevant throttle valve plate 1 No.


50 Relevant cylinder cap 1No.

51 Relevant Feed sleeve handle 1No.

52 Relevant screw 1No.

53 Relevant Spindle 1 No.

54 Relevant Bearing spacer 1 No.

55 Relevant Dowel 2 Nos.

1No. 1 Relevant centre 1No.

2 Relevant Bushing 1 No.

3 Relevant end plate 1No.

4 Relevant Feed Post 1No.


6 Relevant liner 1No.

7 Relevant Rotor housing assembly 1No.

8 Relevant Dead handle 1No.

9 Relevant Plate 1No.

10 Relevant Ball bearing 1No.

11 Relevant throttle valve 1No.

12 Relevant end plate 1No.

13 Relevant Gear stud 1No.

14 Relevant ball bearing 1No.

15 Relevant valve cage 1No.

16 Relevant valve pin 1No.

17 Relevant bearing clamp nut 1No.

18 Relevant Governor lever 1No.

19 Relevant Governor push pin 1No.


21 Relevant Nut 1No.

22 Relevant muffler 1No.

23 Relevant protection sleeve 1No.

24 Relevant throttle cap 1No.

25 Relevant roller bearing assembly 1No.

26 Relevant packing nut 1No.



29 Relevant transfer plate 1No.

30 Relevant Cylinder cap 1No.

31 Relevant Feed sleeve handle 1No.

32 Relevant throttle valve 1No.

C1529 Pneumatic Tool-Reversible Drill with the speed upto 100RPM

33 Relevant screw 1No.

C292

34 Relevant roller race 1No.

35 Relevant retainer washer 2Nos.

36 Relevant throttle valve plate 1No.

37 Relevant seat 1No.

38 Relevant collar 1No.

39 Relevant sleeve 1No.

40 Relevant Retainer sleeve 1No.


42 Relevant Universal Joint 1No.

43 Relevant Extractor pin 1No.


45 Relevant Spindle 1No.

46 Relevant Bearing spacer 1No.

47 Relevant Internal gear 1No.

48 Relevant gear pinion 1No.

49 Relevant internal gear 1No.

50 Relevant spindle gear 1No.

51 Relevant Governor weight 4Nos.

52 Relevant set screw 1No.

53 Relevant Dowel 2Nos.

54 Relevant Live air handle stem assembly

1No.

55 Relevant gear case assembly 1No.


1No. 1 Plastic Moulding Powder: 50Gms.

a) ABS Net +5% wastage

b) Polycarbonate Net +5%wastage

c) Polyphenylene Oxide Net +5%wastage

d) Polyacetal Net +5% wastage

e) Polycarbonate Net +5% wastage

f) Polyamide Net +5% wastage

g) Phenol Formaldehyde (Bakelite) Power and Moulded components thereof

Net + 5% wastage

2 Silicon Oils 1gm

3 Industrial Jewels with Screws 2Nos.

4 Pivots 2Nos

5 Hair Springs Net to net

6 Super Enamelled Copper Wire Net to net

7 Duralumin Rods Free Cutting Aluminium Rods, Capillary Tubes:

Net + 2% Wastage

a) Copper Bars/Strips Net +2% wastage

C1530 Movements for Electrical Measuring Instruments type: Moving iron, Moving Coil,Dynamo Meter,Bimetallic Reed Type,Namely Volt Meter,Ammeter,Frequency Meter,Watt Meter,Multimeters,Insulation Testers,Maximum Demand Indicator,Power Factor Meter

b) Manganin Wire/Rods Net + 2% wastage

C293

c) Eureka Wire/Rods Net +2% Wastage

8 Magnet Centre Core Net to net

9 Coil Former 1No.

10 Mumetals Permaloy Strips & Components thereof

Net to net

11 Pointers/Pointer Arms Net to net

12 Tant Bands/Ligaments Net to net

13 Barllium Copper/Phospher/Bronze Strips

Net +5% wstage (Qty. resctricted to 20gms)

14 Aluminium Die Castings Net to net

15 Bimetallic Springs 2Nos.

16 Springs Steel Strips Net to net

17 Transistors, Capacitors, IC's & other electronic components not covered by other inputs entries

Net to net

18 Yoke 1No.

19 Hybride Circuits 1No.

20 Zener Diodes 2No.

21 Yoke Holder 1No.

22 Lower Boss/under Boss 1No.

1No. 1 Relevant Inlet bushing 1No.

2 Relevant Hose Tail 1No.

3 Relevant Throttle Lever 1No.

4 Relevnt Rear Valve Seat 1No.

5 Relevant Front Valve Seat 1No.


7 Relevnt Handle Bare 1No.

8 Relevnt Throttle Valve Bushing 1No.

9 Relevant Bolt 2No.

10 Relevant Pawl 2No.

11 Relevant Ratchet Ring 1No.

12 Relevant Cylinder 1No.


14 Relevant Cylinder Bushing 1No.

15 Relevant Retainer Plate 1No.

16 Relevant Chuck 1No.

17 Relevant Chuck Sleeve 1No.

18 Relevant Front Head 1No.

19 Relevant Plunger Shifter 1No.

20 Relevant Shifter Sleeve 1No.

C1531 Pneumatic Tools-Hand Drill without Muffler with chuck 3/4" X 3 3/4" (19mm X 95.2mm)

21 Relevant Retainer Sleeve 1No.

1No. 1 Relevant Inlet Bushing 1No. C1532 Pnumatic Tools-Hand Drill with Muffler and 2 Relevant Hose Tail 1No.

C294

3 Relevant Throtle Lever 1No.

4 Relevant Rear Valve Seat 1No.

5 Relevant Front Valve Seat 1No.


7 Relevant Handle Bare 1No.

8 Relevant Throttle Valve Bushing 1No.

9 Relevant Bolt 2No.

10 Relevant Pawl 2Nos.

11 Relevant Ratchet Ring 1No.

12 Relevant cylinder 1No.


14 Relevant Cylinder Bushing 1No.

15 Relevant Retainer Sleeve 1No.

16 Relevant Retainer plate 1No.

17 Relevant Chuck 1No.

18 Relevant Chuck Sleeve 1No.

19 Relevant Front Head 1No.


21 Relevant Plug Muffler 1No.

22 Relevant Button-Rotation Release

2Nos.

23 Relevant Washer-Clamping 1No.

24 Relevant Plunger Shifter 1No.

25 Relevant Shifter Sleeve 1No.

26 Relevant Depth Gauge 1No.

Shifter Sleeve with Chuck 3/4" X 3 3/4" (19mm X 95.2mm)


1No. 1 Relevant Live Air Handle Cap 1No.

2 Relevant Plug Handle 1No.

3 Relevant Live Air Handle Cover 1No.


5 Relevant Hose Nipple 2No.

6 Relevant "Band-It" Clamp 2Nos.

7 Relevant Intake Hose 1No.

8 Relevant Shell & Nose Cap 1No.

9 Relevant End Cap 1No.

10 Relevant Eccentric Shaft Nut Assembly

2Nos.

11 Relevant Upper end plate 1No.

12 Relevant Eccentric weight 1No.

Relevant Eccentric shaft 1No.

14 Relevant Lower end Plate 1No.

15 Relevant Hose Clamp (band-It). 3Nos.

C1533 Pneumatic Tool-Concrete Vibrator with 2 1/2 (inch) Head

16 Relevant Swivel Nipple 1No.

C295

17 Relevant Lock Wire 1No.

18 Relevant Hose Clamp (Band-It). 2No.

19 Relevant Hose Nipple 1No.

20 Relevnt Exhaust Swivel Collar 1No.

21 Relevant Live Air Hose 1No.

22 Relevant Strainer 1No.

23 Relevant Oiler Body 1No.

24 Relevant Live Air Handle Stem & Bushing

1No.

25 Relevant Exhaust Hose 1No.

1No. 1 Relevant Valve 1No.

2 Relevant Retainer 1No.


4 Relevant Spring 2Nos.

5 Relevant Cylinder 1No.

6 Relevant Clamp 1No.


8 Relevant Muffler Plug 1No.

9 Relevant Housing 1No.

10 Relevant Pin 2Nos.

11 Relevant Air Tube 1No.

12 Relevant Bushing 2nos.

13 Relevant Shaft 1no.

14 Relevant Button 1No.

15 Relevant Bush 1No.

16 Relevant Bearing 2Nos.


18 Relevant Casting 1 No.

19 Relevant Chain Link Lead 1No.


C1534 Pneumatic Tool

21 Relevant Handle 1No.

1No. 1 Relevant Handle Bracket (made of Steel Gr. SAE 8620)

1No.

2 Relevant Handle Bolt (made of Steel Gr. EN 9)

1No.

3 Relevant Air Inlet Swivel (made of Steel Gr. EN 24)

1No.

4 Relevant Air Inlet Swivel Nut (made of Steel Gr. SAE 8620)

1No.

5 Relevant blower Valve (made of steel Gr. SAE 8620)

1No.

6 Relevant Thru Bolt (made of steel Gr. EN 24)

2Nos.

7 Relevant Front Head (made of Steel Gr. SAE 8620)

1No.

C1535 Pneumatic Rock Drill

8 Relevant Retainer (made of Steel Gr. SAE 8620)

1No.

C296

9 Relevant Ratainer Trunnion (made of Steel Gr. SAE 8620)

2Nos.

10 Relevant Cylinder (made of Steel Gr. SAE 8620)

1No.

11 Relevnt Back Head (made of Steel Gr. SAE 8620)

1No.

12 Relevant Throttle Valve Handle (made of Steel Gr. SAE 8620)

1No.

13 Relevant Ratchet Ring (made of Steel Gr. SAE 8620)

1No.

14 Relevant Valve Case (made of Steel Gr. EN 354)

1No.

15 Relevant Blower Valve Bushing (made of Steel Gr. SAE 8620)

1No.

16 Relevant Rifle Bar Nut Bronze (made of Steel Gr. SAE 8620)

1No.

17 Relevant Piston (made of Steel Gr. EN 355)

1No.

18 Relevant Bushing Cylinder (made of Steel Gr. SAE 8620)

1No.

19 Relevant Air Tube (made of Steel Gr. SAE 8620)

1No.

20 RelevantChuck Rotation Nut (made of Steel Brass)

1No.

21 Relevant Chuck Sleeve (made of Steel Gr. SAE 8620)

1No.

22 Relevant Chuck (made of Steel Gr. SAE 8620)

1No.

23 Relevant Rifle Bar (made of Steel Gr. SAE 8620)

1No.

24 Relevant Valve(made of Steel Gr. SAE 8620)

1No.

25 Relevant Valve Guide Bushing (made of Steel Gr. SAE 8620)

1No.

26 RElevant Bushing Water Valve (made of Steel Brass )

1No.

27 Relevnt Throttle Valve (Made of steel Gr. SAE 8620)

1No.

1No. 1 Relevant Throttle Valve (made of Steel Gr. SAE 8620)

1No.

2 Relevant Throttle Tube (made of Steel Gr. ENIA)

1No.

3 Relevant Throttle Lever (made of Steel Gr. EN 8)

1No.

4 Relevant Valve Case Lid (made of Steel Gr. SAE 8620)

1No.

5 Relevant Valve (made of Steel Gr. EN24)

1No.

6 Relevant Valve Case (made of Steel Gr. SAE 8620)

1No.

7 Relevant Handle (made of Steel EN8)

1no.

8 Relevant Spring Clip (Lock Collar) (Made of Steel Gr. EN8)

1No.

9 Relevant Lock Collar (made of Steel Gr. EN8)

1No.

C1536 Pneumatic Tool-Riverting Cutter (Buster) 8" to 11" Cylinder

10 Relevant Cylinder (made of Steel 1No.

C297

Gr. EN24)

11 Relevant Piston (made of Steel Gr. T118 CR2)

1No.

12 Relevant Lower Sleeve (made of Steel Gr. EN31)

1No.

13 Relevant Upper Sleeve (made of Steel Gr. EN 31)

1No.

14 Relevant Retainer Sleeve (made of Steel Gr. EN 24)

1No.

15 Relevnt Exhaust Deflector (made of Steel Gr. SAE 1070)

1No.

C1537 Regulators with rotating outlet for LPG Cylinder

1 No. (227gms)

1 Zinc 245gms)

1Kg 1 Carbon Steel/Non Alloy Steel/bar/Rods/Billets

1.700Kg/Kg content in the export product

2 Chemicals Rust Preventing Oil/Primer/Paints

Limited to 2% of FOB value of export

3 Consumables:- Refractory material, Die Steel, die Block,Cutting Tool,Cutters Sawing blades, including Bimetallics bandsaw blades steel shots, fuel oil, heat treatment chemicals quenching oil & lubricants.

Limited to 4% of FOB value of the export.

4 a) PIPE + RUBBER +NICKLE

(i)Pipe(for handle) ERW Cold Drawn Steel Tubes pipe of Relevant Std.

0.280Kg

ii) Nickle (for Electroplating for (i)

0.012Kg

iii) Rubber (for Grip) Natural Rubber OR

0.130Kg

C1538 Non Alloy Steel Forged (Mechined) Hammers upto 10Kg Pc. Wt. Without Handle or with Handle made of Steel/Wood/Rubber Gripped Steel Pipe.

b) Wood (for Handle) 0.250Kg

Import item at 4(a) (I) (ii) & (iii) and (b) will be allowed with reference to the nature of the product to be exported.

1MT. 1 Non Alloy Steel Plate 1.32MT

2 Non Alloy Steel Round 0.367MT

C1539 Bearing/Gear Puller made of Non Alloy Steel Plate/Round with chrome plated legs. 3 Nickle 15.5Kg

1Kg 1 Terminal Net to net

2 Coupler Net to net

3 Nylone Grannules 1.05Kg/Kg content in the export product

4 Phenol Formaldehyde 1.05Kg/Kg content in the export product

5 Polyester Grannules 1.05Kg/Kg content in the export product

6 ABS Grannules 1.05Kg/Kg content in the export product

7 PVC Grannules 1.05Kg/Kg content in the export product

C1540 Handle Bar Switch LH/RH : a) with/without grip (b) with/without lever (c)with/without cone

8 Copper Wire Bars/Copper Sheet. 1.02Kg/Kg content in the export product

C298

9 Brass Sheet/Strips 1.05Kg/Kg content in the export product

10 Spring Steel/Coil/Strip 1.05Kg/Kg content in the export product

11 Mild Steel Square/Rods 1.05Kg/Kg content in the export product

12 Aluminium Alloy Ingots. 1.05Kg/Kg content in the export product

C1541 Grip for Handle Bar with/without Cone

1Kg 1 PVC Grannules 1.05Kg/Kg content in the export product


C1543 Shifted to Miscellaneous Group

1Kg 1 Relevant Aluminium Alloy Ingots


2 Nylone Cord -66 1.01Kg/Kg content in the export product

C1544 Aluminium Drying Hanger

3 CRCA Sheet 1.075Kg/Kg content in the export product

1Kg 1 Resin (Epoxy/Polyester). 187gms. C1545 Micanite Insulator Sheets containing 170gms, Resin.

2 Teflon (PTFE) coated glass cloth sheets/roll

upto 5% of FOB value of export product

1MT 1 Relevant Forging Quality Carbon Steel/ Alloy Steel/ Stainless Steel Rounds/ Billets/ Bars/ Rods

1.65MT

2 Rust Preventing Oil/Primer/Paint, Die Steel/Die Blocks, Cutting Tools, Sawing blades, Metallic Bandsaw blades, Steel Shots, Refractory material, Heat Treatment Chemicls, Quenching Oil and Lubricants

Upto 5% of the FOB value

C1546 Carbon Steel/Alloy Steel(including Stainless Steel). Forged Flanges.

3 Deleted

Note:- Furnace Oil shall be allowed only for Hot Forgings

1No. 1 Vaccum interrupter of relevant rating OR RAW MATERIAL

Net to net

1) Copper Bar 1.01 kg/kg content in the Vaccum Interrupter

2) OFHC Bar 1.01 kg/kg content in the Vaccum Interrupter

3) SS Strips/ Plate 1.05 kg/kg content in the Vaccum Interrupter

4) Bismuth Powder/ Chrome Powder

1.03 kg/kg Spherical OFHC Cu powder

2 Aluminium Ingot 1.01 kg/kg content in the export product.

3 CR/HR Non-Alloy Steel Sheet/Coil


C1547 Outdoor/Indoor Vaccum Circuit Breaker with or without Motor operated mechanism and supporting structure (of different ratings and weight of supporting structure)

4 Copper Wire Bar 1.01Kg/Kg content in the export product

C299

5 Berrylium Copper Strip 1.01Kg/Kg content in the export product

COMPONENTS

1 Forged ZLR Ring 1

2 Bellow Closure Plate 1

3 Convolution 1

4 Pressed End Plate 1

5 End Plate 1

6 Bellow Assembly 1

7 Stud Plate 1

8 Bearing Retainer Plate Net to net

9 Bearing Net to net

10 Gauze Tilter Net to net

11 Pump Port Black 1

12 Restrain Band 1

13 Pump Port 1

14 End Plate Assy. 1

15 Pump Port Braze Ring 1

16 MC Stub 1

17 FC Stub 1

18 Glass Ceramic Envelope 2

19 End Shield 2

20 Center Shield 2

21 Getter 1

22 ZLR Contact Tips 2

23 MC Base 1

24 FC Base 1

25 Incusil Pallet 1

26 End Plate 2

27 Braze Washer 4

28 CLR Cup 2

29 Pumped Assembly 1

30 Bearing Liner 1

31 Mounting Stud 3

32 Lable 1

33 Restraining Band 6

34 Plain Washer 3

35 Spring Washer 3

36 HEX Nut 3

1No. 1 Vacuum interrupter of relevant rating

Net to net

2 Aluminium Ingot 1.01Kg/Kg content in the export product

C1548 Outdoor/Indoor Vaccum Circuit Breaker with Motor operated mechanism and supporting structure (of 3 CR/HR Non Alloy Steel 1.03Kg/Kg content in

C300

Sheet/Coil the export product

4 Copper Wire Bar 1.01Kg/Kg content in the export product

different ratings and weight of supporting structure)

5 Berrylium copper Strip 1.01Kg/Kg content in the export product

1Kg 1 Aluminium Circles, Commercial Grade


C1549 Pressure Cooker made of Aluminium Body & Stainless Steel (AISI 304 Grade) Lid

2 Non Magnetic Stainless Steel sheets/Coils AISI 304 Grade 1/1.25mm Thick


C1550 Carbon Steel (MS) Fabricated Tower Packings

1MT 1 CRCA Carbon Steel (MS) Sheets/Strips.

1.02 MT per MT of export product.


C1552 Deleted

1No. 1 Nickel fibremat fibrex OR

27.05Sq.ft.

1 Nickel Powder 3.12Kgs.

2 Nylone Moulding granules 3.70Kgs.

3 Non woven Separators 12.40 Sq./Mtrs.

4 Nickel Powder Type 255/287/210

2.64Kgs.

5 Celegard (R) 3400 Flat Sheet/ Film

6.20Sq. Mtrs.

6 Battery Connectors 1No .

7 Metregrip 303 LV epoxy adhesive acticator

0.52 Ltrs

C1553 Battery type NCSPB 25150 (Nickel) Cadmium Batteries) 24Vols. 25AH

8 Metrigrip 303LV epoxy Adhesive base

0.52Ltrs.

C1554 Shock Absorbers for Two wheelers/three wheelers

1No. 1 Bump Stop (Hexagon RSI) 1No.

1No 1 Reverse DU Bush 1No

2 Rod Seal 20MM 1No.

C1555 Strut with Spring Assembly for Van

3 Bushing 20MM 1No.

C1556 Shock Absorbers (Gas filled) for Multi Utility vehicle (MUV)

1No. 1 Piston Rod Seal 1No.

C1557 Shock Absorbers for Cars/Jeep-conventional

1No. 1 M.L. Seal 1No.

1No. 1 Copper Wire Rods/Cathodes 1.01Kg/Kg content in the export product

2 Copper Strips 1Kg/Kg content in the export product.

3 Plain Copper stranded Flex Round (Braided Copper)

1Kg/Kg content in the export product

4 Aluminium Sheets/Ingots 1.01Kg/Kg content in the export product

5 CRCA Sheets. 1.01Kg/Kg content in the export product.

6 Thermostat Metals Net to net

C1558 Circuit Breakers upto & including 200KVA.

7 Electrical Contact Net to net

C301

Buttons/Square Buttons/Round Buttons.

8 Fastners/Tab Nuts Net to net.

9 Extension Springs. Net to net

10 Secondary Latch Spring Net to net

11 Contact Arm Springs Net to net

C1559 Shifted to Electronics Group















C1574 Bicycle Tube Valve mainly made of Brass

1Kg 1 Brass Scrap 1.20Kg/Kg content of Brass in the export product.

1Kg. 1 Tin Ingots 1.02Kg/Kg content in the export product.

2 Copper Scrap. 1.06Kg/Kg content in the export product.

3 Nickle 1.02Kg/Kg content in the export product.

C1575 Bronze ingots of different allowing percentage (containing Tin, Copper and Nickle).

4 Phosphor Copper 0.0102Kg.

1Kg 1 Tungsten Wire 1.2Kg C1576 Tungsten Filament for GLS Lamps- 150 WCC. 2 Molybdeneum Wire 0.85Kg

C1577 Doctor Blades (for 1Kg 1 Hardened & Tempered Carbon 1.15Kg

C302

printing machines) Steel Strips (In Coils)/ Stainless Steel (Martensitic Grade) Strips (in Coils)

1MT 1 Calcined Clay 0.752MT

2 Non-Plastic Clay 0.220MT

3 Ball Clay 0.055MT

C1578 Fire Clay Bricks/Shapes

4 SRM-30 (Calcined Alumina) 0.035MT

C1579 Iron-Nickel Alloy(s) Wire /Strip of different composition

1 Kg 1 Nickel Pellets and /or Cathodes 1.03Kg/Kg content in the export product.

1Kg 1 Nickel Pellets and /or Cathodes. 1.03Kg/Kg of Nickel in the export product.

C1580 Nickel Chromium Alloy(s) Wire /Strip of different composition 2 Chromium Metal Flake and/or

Lumps. 1.03Kg/Kg content in the export product.

1Kg 1 Nickel Pellets and/or Cathodes 1.03Kg/Kg of Nickel in the export product.

C1581 Nickel-Copper Alloy(s) wire /Strip of different composition 2 Copper Ingot and /or Copper

Cathodes 1.03Kg/Kg of Copper in the export product.

C1582 High Speed Steel broaches (cutting tolls), Cobalt & Non-Cobalt Grade

1Kg 1 Relevant High Speed Steel (Cobalt/Non-Cobalt grade)


C1583 Spring Casing for Pipe Line support

1Kg 1 M S Plate/Sheet 1.15Kg/Kg content in the export product

Note: If the export product is galvanized zinc may be allowed as 4% of the weight of parts to be galvanised.

1Kg 1 Galvanized Steel Wire 1mm to 2.1mm dia

1.02 kgs/kg content in the export product

C1584 Staples/Staples in Strips

2 Synthetic Glue 0.026 Kg

1No. 1 Geared Motor Net to net

2 Servo Motor Net to net

3 Hydraulic Pump Net to net

4 Controller for Shear Net to net

5 Hydraulic Accumulator Net to net

6 Encoder Net to net

7 Linear Motion bearing Net to net

8 Servo Amplifier Net to net

9 Ball Screw Net to net

10 Nuts for Ball Screws Net to net

11 Spherical Bearing Net to net

12 Thread Spindle Net to net

13 Timing Belt Net to net

14 Bush PAP 50/40 Net to net

15 Timing Pulley Net to net

C1585 CNC/NC Hydraulic Shearing Machine

16 Hydraulic Seals Net to net

1Kg 1 High Grade Raw Ground Sponge Iron


C1586 Iron Alloy Powder made from Sponge Iron of different composition. 2 Copper Powder 1Kg/Kg content in

C303

the export product

3 Carbon Ultra Fine 1Kg/Kg content in the export product

4 Zinc Sterate 1Kg/Kg content in the export product

5 Nickel Powder 1Kg/Kg content in the export product

1No. 1 Geared Motor Net to net

2 Servo Motor Net to net

3 Hydraulic Pump Net to net

4 Director Control Valve Net to net

5 Prop. Director Control Valve Net to net

6 Prop. Pressure Control Valve Net to net

7 Pressure Relief Valve Net to net

8 Cartridge Valve Net to net

9 Spherical Bearing Net to net

10 Linear Motion Bearing Net to net

11 Linear Motion Guides Net to net

12 Hydraulic Seals Net to net

13 Guide Shaft Bearing Net to net

14 HP Line Filter Net to net

15 Timing Belt Net to net

16 Timing Pulley Net to net

17 Linear Scales Net to net

18 Servo Amplifier Net to net

19 CNC Press Brake Controller Net to net

20 Axis Control Card Net to net

21 Safety PLC Net to net

22 Expanded Module Net to net

23 Two Hand Control Box Net to net

24 Nuts of Ball Screws Net to net

25 Ball Screws Net to net

26 Guide Shaft Net to net

27 Special Elec. Connector Net to net

C1587 CNC Hydraulic Press Brake

28 Encoder Net to net

C1588 Deleted

1No. (378Kg)

1 High Tensile Carbon Steel Wire 12.2Kg

2 Relevant Portland Cement 68.5Kg

C1589 Duel Gauge Prestresed Concrete sleeper (size 2750mm X 250mm Based Width X 255mm Height)

3 Inserts 6 Nos.


1

1No. 1 Actuator/Spray Cap 1No. C1591 Aerosol Valve

2 Body 1 No.

C304

3 Stem 1 No.

4 Inner Gasket 1 No.

5 Outer Gasket 1No.

6 Mounting Cup 1No.

7 Polyethylene Grannules 1.05Kg/Kg content in the export product.

1No. 1 Flanges 1No.

2 Lock Ring 1No.

3 Valve Guard 2No.

4 Rubber Sealing Ring 1No.

5 Locking Clip 1 No.

6 Safety Pin 1No.

C1592 Disc Wheel Flat Base Rim

7 Lock Pin 1No.

1No. 1 S.S. 304 Plate/Coil (Thickness from 5mm to 16mm)

1.20MT/MT content in the export product

2 Relevant Variable Speed Motor 1No. (net to net)

3 Relevant fixed Gear Motor 1 No. (net to net)

4 Relevant ERW Pipes 0.10MT

C1593 Vaccum Drum Cane Mud Filters

5 SS 304 Electrodes 20Kg per MT of Steel weight in export product

1No. 1 Zinc Ingot 1.10Kg/Kg content in the export product

2 Brass sheet 1.15Kg/Kg content in the export product

3 CRCA Sheets/coils 1.20Kg/Kg content in the export product

4 Stainless Steel Sheet/Coil 304 Grade


5 Spring Steel Sheet 1.20Kg/Kg content in the export product

6 Polyacetal 1.05Kg/Kg content in the export product

7 Lock Pin 2 Nos.

8 Guide Lock Plate 2 Nos.

9 Lock Plates 18 Nos. (Net to net)

10 Key 2 Nos.

11 Cap 2 Nos.

12 Key Tag 1 Nos.

C1594 Automobile Locks other than Ignition locks

13 Gasket 2 Nos.

Note: The Components shal be allowed on net to net basis which the firm shall account for in the export product.

1No. (1254Kgs. 2020 X 2mm)

1 Non Alloy Steel plates/Flats 845Kg

2 Non Alloy Steel Square/Rectangle ERW Tube

93Kg

C1595 Folding Machine for Sheetmetal (Manual)

3 Non Alloy Steel Angles 107Kg

C305

4 Non Alloy Steel Bright Bar 2.74Kg

1MT 1 Aluminium Ingots Commercial grade

1.05MT/Mt content in the export product

C1596 Rolled Aluminium Colour coated Plates, Sheets, Strips including Corrugated Aluminium Sheets/Strips

2 Relevant Paints. 1% of FOB Value

C1597 High Speed Stel Wires 1Kg 1 High Speed Steel Bar/Wire Rods/Rods of relevant grade

1.03Kg

C1598 Machined Components made of brass not elsewhere specified

1Kg 1 Brass Scrap 1.075Kg

1 No. 1 Relevant Actuator 1No. C1599 Industrial Valve fitted with Actuator 2 Relevant Valve 1No.

C1600 Sanitary Fittings made of Nickle Bronze

1Kg 1 Nickle Bronze Ingot 1.05Kg

Note:- Composition of imported input should conform with that of the export product.

1No. 1 CRCA Sheet/Strip 1.05 kg/kg content in the export product

2 Polymethile Metaacrylate 1.05 kg/kg content in the export product

3 Polymethile Metaacrylate (PMMA) Natural


4 Polycarbonate 1.05 kg/kg content in the export product

5 Poly propylene Talc 1.05 kg/kg content in the export product

6 ABS 1.05 kg/kg content in the export product

7 Spring Net to net

8 Cut Gasket Net to net

9 Foam Seal Gasket Net to net

10 Gasket Net to net

C1601 Complete Rear Lamp Assembly for Automobiles

11 Fixing Screw Net to net

1No. 1 Polymethile Metaacrylate 1.05 kg/kg content in the export product

C1602 Lense for Rear Lamp Assembly for Automobiles 2 Polymethile Metacrylate

(PMMA) Natural 1.05 kg/kg content in the export product



C1605 Double Parabolic Louvres (Aluminium Louvres for Light Reflection)

1Kg 1 Pre-Anodised Aluminium Coils 1.01 kg/kg content in the export product

C1606 PFA or FEP or PTFE or PVDF resin lined Ball Valves with PTFE components like seals, seats, packing etc. in assorted size/ Weight

1Kg 1 PFA or FEP or PTFE or PVDF Resin


C306

1Kg 1 Epoxy resin Epotec/CY225/ CW229 or equivalent grade


2 Hardner HY 925/ Hexa Hydro Phthalic Anhydride (HHPA)/ equivalent grade/HW229


3 Electrolytic Copper Wire Bar/ Flats/ Rods/ Bus bars


4 Mould Relese Agent QZ-13/QZ24

CIF value restricted to 1% of FOB value.

C1607 Epoxy components of different voltge rating and specification.

5 Semi-conducting Varnish-800/8001

CIF value restricted to 1% of FOB value.

1No. 1 Relevant Diesel Engine 1 No.

2 Relevant Alternator 1 No.

C1608 Diesel Generating Set (specification to be indicated by the applicant) 3 Relevant Key Start Control

Module 1 No.

1No. 1 152.4mm pitch elevator chain On net to net basis

2 Segmented Sprocket (head) 152.4mm Pitch 630 PCD

On net to net basis

C1609 1200mm Slat Chain Conveyor

Segmented Sprocket (Tail) 125mm pitch 755PCD

On net to net basis

1No. 1 Diaphragm-Nitrile Rubber Net to net

2 Springs-Alloy Spring Steel Net to net

3 Fastners-SS 304/SS 316 Net to net

4 Bushes-Glacier MB 4530 DU Net to net

5 Seals-Barker Rod Seal Net to net

6 Adaptor-Swagelok SS 12-RB-4 Net to net

C1610 Diapharagm Actutators

7 Vent Protecor Swagelok SS-MD2

Net to net

C1611 Aluminium Rod/Bar and other extruded products.

1Kg 1 Aluminium Billet 1.01Kg

1No. 1 Aluminium Ingots 8.9Kg

2 Aluminium Bronze 0.61KG

3 Aluminium Rod 0.40Kg

4 Square/Round/Rod(Carbon Steel)

9.8KG

5 Relevant Socket Lever 1No.

6 CR/HR/Steel Sheet/Coil/Strip 0.55Kg.

7 Cold Drawn Seamless Tubes EN 24

1.44 Kg

8 MS Squares Hexagon Rods 0.25 Kg

9 Relevant Oil Seals made of Synthetic Rubber

13 No.

10 High Tensile Bolts/Nuts 10 Nos.

11 Relevant Spring 4 Nos.

C1612 Hydraulic Jack Weight 22Kgs. Model No. HJ01021

12 Relevant Tube fittings Assembly 4 Nos.

1Kg 1 Tungsten Carbide Mixed Powder OR


1 a) Tungsten Carbide Powder 99.5% min. purity


C1613 Tungsten Carbide Inserts

b) Tantalum Carbide 1.05 Kg/Kg content

C307

in the export product

c) Tantalum Niobium Carbide 70/30%


d) Cobalt Metal 98.8% Min. 1.05 Kg/Kg content in the export product.

e) Tungsten Titanium Carbide 50/50%


2 Packing Material As per packing policy.

3 Tantalum Niobium carbide 70/30%


4 Cobalt Metal 98.8%min 1.05 kg/kg content in the export product

5 Tungsten Titanium Carbide 50/50%


6 Packing Material As per packing policy.

7 Consumables CIF value restricted to 4% of the FOB value

8 Grinding Wheel for edge honing and Ultra Graphite Coat

restricted to 3% of FOB value

1000Nos. 1 Cold Rolled Mild Steel Strips/coils/Sheets.

7250 Kgs.

2 Manganese Chrome Steel Strips 702 Kgs.

3 Spring Steel Strips 150 Kgs.

4 Mild Steel Bars/Wire 920 Kgs.

5 Stainless Steel Sheet 160 Kgs.

6 Aluminium Alloy ( LM-6) 4700 Kgs.

7 Zinc Ingot 500 Kgs.

8 ABS Granules 1.05 Kg/Kg content in the export product.

C1614 Typewriter (Manual) with Metal Casing

9 Type Sets. Net +1% wastage

1No. 1 Relevant Screws OR Relevant Gears.

1 Set.

2 Relevant Electric Motor OR Relevant Diesel Engine

1 No.

3 Relevant Mechanical Seal 1 No.

4 Relevant Pressure Relief Valve 1 No.

5 Relevant Ball Bearing with SKF No.

1 No.

6 Relevant Coupling 1 No.

C1615 Screw/Gear Pump/Pumpset

7 Relevant Pump Casing Insert 1 No.

Item No. 2 i.e. Electric Motor/Diesel Engine shall be allowed only when complete set is exported. All inputs imported shall be accounted for in export product

1Kg 1 Phenol Formaldehyde Resin (Powder Phenol Resin)

0.185Kg C1616 Asbestosfree Brakelinings without Brass Chips & Nitrile Rubber 2 Fibreglass Chopped Strands 0.076Kg

1No. 1 Ni-cd Rechargeable Battery 1.2 Volts AA Size

3Nos. C1617 Rechargeable Flash Light 3.6 Volt AA Size NiCd Battery 2 ABS Granules 1.05Kg/Kg content in

the export product.

C308

3 Pre-focused Bulbs 1No.

4 Transformer 1No.

1No. 1 Ni-cd Rechargeable Battery 1.2 Volts AA Size.

2 Nos.

2 ABS Granules 1.05Kg/Kg content in the export product.

3 Pre-focused Bulbs. 1No.

C1618 Rechargeable Flash Light 2.4 Volt AA Size NiCd Battery

4 Transformer 1No.

1No. 1 Ni-cd rechargeable battery 2.4 Volts

1No.

2 ABS Granules 1.05Kg/Kg content in the export product

3 Pre-focused Bulbs. 1No.

4 Capacitor 0.33 Mfd. 1No.

C1619 Rechargeable Flash Light 2.4 Volt Button Type Ni-Cd Battery

5 Capacitor 10Mfd. 2 Nos.

1No. 1 Ni-cd Rechargeable battery 2.4 Volt

1No.

2 ABS Granules 1.05Kg/Kg content in the export product.

3 Pre-focused Bulbs. 2Nos.

4 Capacitor 0.33Mfd. 1 No.

C1620 Rechargeable Flash Light 2.4 Volt Button Type Ni-Cd Battery with twin Bulb

5 Switch Single pole 3 way 1No.

C1621 Fibre Bed Mist Eliminator (Candle Filter) having Glass Fibre Filter Segments

1No. 1 Filter Segments in Glass Fibre (Glass Wool) of relevant size

In height of 1Ft. (305mm) OR in Multiple of 2 Ft. (610mm) Segments depending upon the Ht. of the export product.

C1622 Contacts (connector parts) Made of Phosphor Bronze

1Kg 1 Phosphor Bronze Strips CuSn5 1.62Kg

C1623 Ball Screw Actuator 1No. 1 Ball Screw with Nut. 1No.

C1624 Cementing Float/Duplex/Differential shoes of different sizes

1No. 1 Seamless casing pipes of relevant API Grade of Similar Dia.

1 No. of actual length of export product +1/2" extra.

1No. For Export item No. 1 ) 1. Seamless casing pipe in required API Grade 6.062"OD X 4.710" ID

26.1/8" long

For Export item No. 2) (1) Seamless casing pipe in required API grade 7.656" OD X 7.135" ID (2) Seamless casing pipe in required API grade 8.250"OD X 7.135" ID

26"long 10.3/4" long

For export item No. 3) (1) Seamless casing pipe in required API grade 10.625"OD X 8.998"ID (2) Seamless casing pipe in required API grade 11.125"OD X 9.720" ID

26.1/8"long 10.3/4" long

C1625 Stage Cementing Collars 1) For 5.1/2" stage cementing collar 25.5/8" long 2) For 7" stage cementing collar 25.1/2"long with outer sleeve 10.1/4" long 3) For 9.5/8" Stage cementing collar 25.5/8" long with outer sleeve 10.1/4" long 4) For 13.3/8" Stage cementing collar 34" long with outer sleeve 12.375" long

For export item No. 4)

C309

(1) Seamless casing pipe in required API grade 14.375" OD X 12.343"ID (2) Seamless casing pipe in required API grade 14.906" OD X 13.500"ID

34.1/2" long 12.875" long

1MT 1 High Carbon Steel Wire Rods 1.02MT/MT content in the export product.

2 Zinc 4% of the net weight of steel wire rods

C1626 Galvanised High Carbon Steel Wire Ropes with Polypropelene Core

3 Polypropelene Granules 1.05Mt/Mt content in the export product.

1Kg 1 Copper Scrap OR Copper Cathodes

1.06 Kg/Kg content in the export product OR 1.02 kg/kg content in the export product.

2 Tin Ingots 1.02 Kg/Kg content in the export product.

3 Nickel Shots/Pellets/Ingots/Cathodes


4 Lead Scrap OR Lead Ingots

1.06 Kg/Kg content in the export product. OR 1.02Kg/Kg content in the export product.

5 Zinc Scrap OR Zinc Ingot.


6 Aluminium Scrap OR Aluminium ingot


7 Manganese (Elemental Form) 1.02 Kg/Kg content in the export product.

C1627 Copper based alloy ingots of different grade.

8 Phosphor Copper 0.01 Kg.

C1628 Cementing Float/Duplex Differential Collar of different sizes

1No. 1 Seamless casing pipes or relevant API Grade of similar dia

1 No. of actual length of export product +1/2" extra

C1629 Single Stage regular with rotating outlet for LPG

1 No. (260gms)

1 Zinc Alloy A 14/AL 4 Cu 1 230gms.

1 Kg 1 Low Carbon M.S. Defective Coils/sheets

1 kg/kg content in the export product.

2 Zinc 0.025 Kg content in the export product.

C1630 Galvanised Steel Flexible Tube/Pipe (Conduit) with PVC coating

3 PVC Compound (Granules) 1.05 kg/ kg content in the export product.

C1631 Steel Moulds of size 5150 mm long X 1181mm Wide X 2.25 mm TK for manufacturing A.C. Corrugated Sheets.

1 Kg 1 HR Non Alloy Steel Sheet/Coil 1.05 Kg/Kg content in the export product.

C1632 Electrical Wiring Accessories/ components made of Phosphors

1 Kg 1 Phosphors Bronzes Sheets/Strips/Coils


C310

Bronze

C1633 Electrographatised Carbon Block

1 Kg 1 Pre-graphatised Carbon Block 1.02 Kg.

1 Kg 1 Copper Powder 0.64 Kg C1634 Metallic Graphite Blocks containing 62% Copper 2 Natural Graphite Lumps 0.40 Kg

1000 Mtrs. 1 Copper Cathode/CC Rod/Wire Bars Ingots/ Copper Wire Rod

42.315 Kg

2 PVC Resin 75.276 Kg

3 Pthalate Plasticize (DOP) 37.638 Kg

C1635 PVC Insulated Unarmoured control purpose copper cable upto 1.1KV Size 36/0.23mm (1.5Sq.mm) X 3 Core 4 Fillers (Calcium

Carbonate/Alumina/Talc/Kaoline)

12.546 Kg

1 Kg 1 CR Non-Alloy Steel Coils (Prime/Seconds)


C1636 Burning Lances (Non-alloy Steel pipes fitted with alloy steel wires) 2 Alloy Steel Wire of Relevant

Grade. 1.02 Kg/Kg content in the export product.

1 No. 1 HDPE granules 1.05 Kg/Kg content in the export product.

2 G.P. Coils/Sheet 1.05 Kg/Kg content in the export product.

3 Spring Steel Wire 1.02 Kg/Kg content in the export product.

4 CRCA Coil/Sheet. 1.05 Kg/Kg content in the export product.

C1637 Spinning Card Cans

5 Caster Wheels. OR Relevant Bearing

3 Nos. (net to net) 3 Nos. (net to net basis)

Note:- If the party exports only Caster Wheels, then relevant bearing may be allowed on net to net basis as per item No. 5 above i.e. 1 No. per Caster Wheel.

1 Kg 1 Aluminium Ingot OR Rolled Aluminium Sheet in coil Form

1.15 kg OR 1.05 kg

C1638 Diffuser and parts thereof namely Flower, Core, Core Assembly and outer frame in various sizes manufactured without joints from Aluminium Sheets, (other than those manufactured from Aluminium Section/extrusions)

2 Aluminium Scrap 1.20 kg

1 Kg 1 Copper Wire Rod/Cathode 1.01Kg/Kg content in the export product.

2 Glass Fibre Yarn 1.01Kg/Kg content in the export product.

3 Polyester film 1.01Kg/Kg content in the export product.

C1639 Copper Conductor covered with Polyester film & Glass fibre Yarn

4 Nomex Aramid Paper 1.01 kg/kg content in the export product

1 No. 1 Fibreglass/ Synthetic Filter Cloth of relevant GSM

1.02 Sq.Yard/Sq. Yard of cloth in export product..

2 Fiberglass/ Synthetic Sewing Thread

1.01 kg/kg Content in export product

C1640 Fibreglass/ Synthetic Filter Bags of different sizes with Snap Ring made of Stainless Steel AISI 301 and other fittings. 3 Stainless Steel Strip AISI 301 1.02 kg/kg Content in

export product

C311


1 No. 1 DC Plugs 2Nos. C1642 Connector Harness DC Charger Cable Assembly 2 PVC Insulated Cables 1.9 Mtrs.

1 No. 1 Level Assembly 1No. C1643 Platform for Electronic Balances & Weighing Systems

2 Load Cell of relevant Load 1No.

1 Kg 1 CRC Sheet/Coils 1.05Kg/Kg content in the export product.

C1644 Galvanised Lamp stand made of CRCA Sheet

2 Zinc 4% of net weight of steel item to be galvanized.

1 No. 1 For export item No. 1) (i) Gear Box

1No.

ii) Front Axle 1 No.

(iii)View for Oil Level 1 No.

(iv)Plug 1 No.

(v)Distributor Valve and handle Net to net.

2 For export item No. 2) (i) Gear Box

1 No.

ii) Front Axle 1No.

(iii)View for Oil Level 1 No.

(iv)Plug 1 No.

(v)Distributor Valve and Handle Net to net.

3 for export item No. 3) (i) Gear Box

1No.

(ii) Front Axle 1No.

(iii) View for Oil Level 1No.

(iv) Plug 1No.

(v)Distributor Valve and Handle Net to net.

(vi)Hyd. Motor 1 No.

C1645 1) Mini Dumper 2)Front end Loaded cum Dumper 3) Cement Concrete Mixer

(vii)Control Valve 1 No.


1 No. Any and / or all the following components which are actually required for manufacturer of the machinery.

COMPONENT :-

1 Belt with specification Net to net.

2 Motors with detailed specification

Net to net

3 Timing Belt 102mm/100mm content in the export product.

4 Switches, Control Panel and Fuses

Net to net

5 Electrical wires and cables with detailed specifications.

102mtrs/100mtrs in the export product.

C1647 Capital Goods & Machinery notelsewhere specified.

6 Temperature Thermostat Net to net

C312

Switches

7 Fastners 102No./100No. content in the export product.

8 Roller Chain 102Mtrs/100Mtrs content in the export product.

9 Gasket of different type Net to net

10 Camshaft Net to net

11 Subassembly of Machine Net to net

12 Oilseals Net to net

13 Pulleys Net to net

14 Measuring Instrument and valves as component

Net to net

15 Pipe fittings such as Elbow, Tee, Bars, Reducer, Coupling relevant material

Net to net

16 Relevant Bearings including Bush, Ball, Roller or Spherical or combination there of (SKF or equivalent No. of the bearing is to be specified in the application)

Net to net.

17 Relevant Pipe Fitting including Tee, Bands/ Elbows/ Sockets/ Unions

Net to net.

RAW MATERIAL:-

1 Pig iron for the cast components 1.1 kg/kg content in the export product.

2 Non Alloy Steel Plates/Coil/Sheet


3 Alloy Sheet including SS Plates/Coil/Sheets


4 Alloy Sheet/Non-Alloy Steel SS Rounds/Bar


5 Brass Scrap. 102Kg/100Kg content in the export product.

6 Aluminium Alloy Ingots/Rods/Bars


7 Copper Alloy/Rods/Bars 1.01 kg/kg content in the export product.

8 Relevant Type of plastic materials ABS, HDPE, LDPE, PVC compound Nylon6, Nylon66

105Kg/100Kg content of the relevant material in the export product.

9 Non Alloy Steel Welded pipe of relevant dimension


10 Alloy Steel Welded Pipe including S.S. Pipes of relevant dimension


11 Relevant Carbon Steel pipes/ Tubes upto 24" diameter

1.02 Mtr./ Mtr. Content in the export product.

12 Relevant Stainless Steel Pipes/ Tubes having dia 15mm to 400mm


C313

13 Structural materials, including Beams, Chennels, Angles, Chequered Plates, purlines


14 S.S. Screen Wiremesh 1.05 Sq. Mtr./ Sq.Mtr.content in the export product.

15 Relevant Electrode/ Flux 2% of relevant steel to be welded for use in the export product.

a) Relevant welding Electrodes/ Welding Wires/Welding Rods

2% of the weight of steel to be Welded

b) Relevant Flux Equal to the weight of welding wires

MISC. ITEMS:-

1 Grease CIF value restricted to 2% of FOB value.

2 Paint

3 Varnish

4 Lubricating Oil

5 Grinding Wheels.

6 Abrassives

7 Rust Preventive Chemicals

8 Polishing Compounds.

9 Metal Polishing Chemical

10 Deleted

11 Deleted

12 Cutting Wheel

13 Paint & Thinner

14 Self Adhesive Tape

15 Relevant Chemicals

1. Specification/Capacity & weight of capital goods alongwith number is to be indicated in the application.2. Net weight of component & sub assemblies to be imported to be procured indigenously to be given in the application & items to be manufactured from each raw material to be imported is to be given in the application. 3. Net weight of components and items to be manufactured from each raw material to be imported is to be given in the application. 4. Weight of component and item to be manufacturted from each indigenous material in export product is to be given in the applicatin 5. Weight of components and the item given as per Note 2 to 4 should tally with net weight of capital goods to be exported. 6. Total weight of each raw material is to be calculated on the basis of net weight given as per Note 3 above plus wastage as permitted in the norms for the particular raw material.

1 No. 1 S.S.Steel/Coil 1.10Kg/Kg content in the export product.

C1648 3/4 Tube Fryer

2 S.S. Bar/Rod. 1.14Kg/Kg content in the export product.

C1649 U.V. Sterlizer 1 No. 1 S.S. Sheet/Coil 1.01Kg/Kg content in the export product.

1 No. 1 Zinc Ingots 1.10Kg/Kg content in the export product.

C1650 Automobile Ignition Lock

2 Brass Sheet. 1.15Kg/Kg content in the export product.

C314

3 Copper Sheet 1.15Kg/Kg content in the export product.

4 CRCA Sheets/Coils 1.20Kg/Kg content in the export product.

5 Non Alloy Steel Rods/Bars. 1.20Kg/Kg content in the export product.

6 Spring Steel Sheet 1.20Kg/Kg content in the export proudct.

7 Polyacetal 1.05Kg/Kg content in the export product.

8 Steel Ball 2 Nos.

9 Lock Pin 1 No.

10 Cap 2 Nos.

11 Latch 1 No.

12 Lock Plates 10 Nos. or 13 Nos. (Net to net)

13 Key Moulded 1 No. or 2 Nos. (Net to net)

14 Tag Key 1 No.

15 Cap Stator 1 No.

16 Stator 1 No.

17 Cam 1 No.

18 Terminal 5 Nos.

19 Housing 1 No.

20 Plate Spring 1 No.

21 Slide 1 No.

22 Cap Outer 1 No.

23 Spring Dowel - Large 1 No.

24 Spring Dowel - Small 1 No.

Note: The Components shall be allowed on net to net basis which the firm shall account for in the export product.

1 No. (0.502Kg)

1 Polycarbonate (MARKROLON 2805 BLACK)

0.097Kg.

2 Polyamide Glass Filled 15% (Ultramide)

0.066Kg.

3 Polyamide (Polyloy) 0.16Kg

4 HDPE (Durethane) 0.027Kg.

5 Polyamide Glass filled 35% (ultramide).

0.012Kg

6 Polycarbonate (Markolon 2805 Black)

0.008Kg.

7 Polymethylene Oxide ( Delrin). 0.006Kg

8 Polyvinyl Chloride (Delrin) 0.009Kg

9 Polyamide Nylon (PA 6 GF 15) 0.009Kg

10 Univ. Master Batch 0.001Kg.

11 Polycarbonate (APECHT) 0.021Kg

12 Heating Element Wire 1-0-31mm 0.00mKg

C1651 Hair Styler Model No. 4522

13 Heating Element Wire 2- 0.004Kg.

C315

0.26Kgs.

B) COMPONENTS

1 Copper Strip DIN 1791-1.75 X 0.35mm -0421129

0.0015Kg.

2 Bristal Bunch for 35mm brush 4429098

0.0070Kg.

3 Spring Feeder (RSK) -4448039. 2No.

4 Screw PAN 2.2 X 9.5C-0028138 1No.

5 Ferrite ldumping bead -0818161 1No.

6 Stranded wire red - 7strands 0700926

0.1400Mtrs.

7 Stranded wire blue-7 strand 0702090

0.1400Mtrs.

8 Wire and Terminal - 0716319 2 Nos.

9 Insulating Tube (RSK) -0811240 0.0900Mtrs.

10 Fixed Contact 1- 4475004 1No.

11 Fixed Contact2-4475005 1No.

12 Rotary contact 1-4475009 1No.

13 Rotary Contact 2-4475010 1No.

14 Power Cord - 2core/2PIn- 4830803

1No.

15 Metal Cap - 4523011 1 No.

16 DC Miniature motor- 1000W-4457080

1No.

17 FAc (RSK) - 4523003 1No.

18 Pin (RSK) -710947 2No.

19 Aluminium/Electrolytic Capacitor- 0622053

1 No.

20 Paper/Polyester capacitor -0623998

1No.

21 Diode BY 398 (RSK) - 0630574 1No.

22 Switch (RSK) -4522062 1No.

23 Diode in 4004- 630632 4No.

24 Insulating tube for PCB - 0811204

0.030Mtrs.

25 MICA nite- 4523006 6Nos.

26 Terminal 01 - 4523024 2Nos.

27 Terminal Taping- 4522043 2Nos.

28 Terminal 02-4523062 2 Nos.

29 Thermostate (RSK) - 0716439 1No.

30 Switch connecting rod - 452307 1No.

31 Speed nut - 066107 1 No.

32 Lever Rod OR connecting Rod -4522005

1No.

33 Heat Cap - 4523010 1No.

34 Sticker - 0855126 1 No.

35 SS Ring -4485124 1 No.

C316

36 Tube Big Barrel- 4485120 1 No.

37 Plastic Brinstal- 4522126 10Nos.

38 Screw- 1.45 X 3.5 - 4485119 2No.

39 CSK Screw 2.4 X 5- 0032109 2No.

40 Brush Cap (Plastic) - 4522123 1 No.

1 No. (0.764Kg)

1 Polyoxy Methylene (POM Hosta Form C 9021)

0.012Kg

2 Polypropylene Natural (PP Hosta Len PPN 1060).

0.010KG.

3 Acrylonitrilebutadiene Styrene Clear( Luran Clear Grey 388 S)

0.556Kg.

4 LDPE (Evaelvas) 0.018Kg

5 Poly Butylene Terephthalate (Pocan B 7425 PBTP)

0.005Kg.

6 Poly Oxy Methylene Master Batch

0.002Kg.

B) COMPONENTS

1 SINTERED BEARING BUSH FOR LIQUIDIZER JAR - 4250073

1No.

2 SS Nracket - 4250272 1No.

3 Round head revet for liquidizer jar - 140112

4Nos.

4 Cutter upper-4249065 1No.

5 Cutter lower- 4249066 1No.

6 Cutter Shaft- 4250075 1No.

7 Metal bush Coupling - 4250274 2No.

8 Rubber bush coupling -4250079 2Nos.

9 Fibre Washer 7.2 X 13.0.4 - 4250082

2Nos.

10 Copper Spring- 4203135 1No.

11 Bronze Washer 7.2 X 11.5 X 0.2 - 4213041

1No.

C1652 Liquidiser Jar Complete for Mixer-Grinder Model No. 4250

12 Washer 6 X 8.5 X 0.6- 4249177 1No.

1 No. (2.82Kg)

1 Polyoxy Methylene (POM Hosta Form C 9021)

0.112Kg.

2 Polypropylene Natural (PP Hosta Lene PPN 1060)

0.112Kg

3 Acrylonitrilebutadiene Styrene Clear (Luran Clear Grey 388 S)

0.662Kg.

4 LDPE (Evaelvad) 0.018Kg.

5 Poly Butylene Terephthalate (Pocan B 7425 PBTP)

0.005Kg.

6 Poly Oxy Methylene Master Batch

0.01Kg

7 Acrylonitrilebutediene Styrene White (ASA Luran S 778 T)

0.374Kg.

8 Polyporopylene Black (P Hostalen Black PPN 1060)

0.121KG

C1653 Mixer Grinder with Food Chopper & Liquidiser Jar Model No. 4249

B) COMPONENTS

C317

1 Universal Motor -750 W-4249525

1No.

2 Speed Switch-4259011 1No.

3 Diode BY 252 ZK-630478 1No.

4 Resistor 150K- 0612910 1 No.

5 Light Emiting Diode- 4249830 1No.

6 Stranded Wire Red VDE 08 12-16 strands -700926

0.274Mtrs.

7 Strands Wire Black VDE 0812-16 strands - 702103

0.635Mtrs.

8 Stranded Wire Blue CDE 0812-16 strands 702090

0.336Mtrs.

9 Flat Plug - 710969 6No.

10 Thermostat - 4291053 1 No.

11 Cu Wrapper ZK- 4291025 1No.

12 Resistor PTC ZK- 4291810 1No.

13 Shrink Tube Cut- 4291024 1No.

14 Insulation Leatheroid- 4243182 1No.

15 Polyester Foil- 16mm width- 805162

0.04Mtrs.

16 Capacitor X foil EN 132400- 622202

1No.

17 S.S. Clamp - 4249035 1No.

18 Pan Screw 4.2 X 16 ZK - 028140 4No.

19 Metal Washer B 4.3 ZK - 0108111

4Nos.

20 Slider Plate - 4250030 1No.

21 PIN (CAM) -4250031 1No.

22 Screw Counter Sunk 2.9 X 13-028209

2 No.

23 Pan Screw 3.5 X 16 ZK-028149 3 No.

24 Rubber Legs- 4243054 3Nos.

25 Power Cord-2 Core /2 Pin - 3210465

1No.

26 Terminal with screws 717253 1 No.

27 Pan screw 2.9 X 13 - 028065 2No.

28 Cord Clamp- 4905343 1No.

29 Grooved Pin-Din 1472-0125201 3No.

30 Quick lock washer- 109705 3Nos.

31 Spring ZK - 4250029 3No.

32 Cutter Pair - 4249833 1No.

33 Round Head Rivet for Chopper -140109

4Nos.

34 Sealing washer- 4250023 1No.

35 Paper Laminated Stricker -4249096

1No.

36 Ball Holder- 4249107 1No.

37 Ball ZK - 4249099 1No.

C318

38 S.s. tube Sleve- 4249105 1No.

39 Sintered Bearing Bush for liquidizer- 4250073

1No.

40 S.s. Bracket - 4250272 1No.

41 Round Head Rivet for liquidizer - 140112

4Nos.

42 Cutter upper 4249065 1 No.

43 Cutter lower - 4249066 1No.

44 Cutter Shaft - 4250075 1 No.

45 Metal Bush Coupling - 4250274 1No.

46 Rubber Bush Coupling - 4250079

1No.

47 Fibre Washer 7.2 X 13 X 0.4 - 4250082

2Nos.

48 Copper Spring- 4203135 1No.

49 Bronze Washer 7.2 X 11.5 X 0.2 - 4213041

1No.

50 Washer 6 X 8.5 X 0.6- 4249177 1No.

1 No. (0.506Kg)

1 Polycarbonate (MARKROLON 2805 BLACK)

0.097Kg

2 Polyamide Glass filled 15% (Ultramide)

0.0120Kg.

3 Polyamide (Polyloy) 0.016Kg.

4 HDPE (Durethane) 0.024Kg

5 Polyamide Glass filled 35%(Ultramide)

0.014Kg.

6 Polycarbonate (Markolon 2405 Black)

0.004Kg.

7 Polymethylene Oxide (Delrin) 0.005Kg.

8 Polyvinyl Chloride (decelith) 0.010Kg

9 Polycarbonate Clear(Markrolon 2805)

0.002Kg.

10 Polyamide Nylone (PA 6 GF 15) 0.014Kg.

11 Heating Element Wire 1-0-31mm 0.005Kg.

12 Heating Element Wire 2-0.26Kgs.

0.004Kg

B) COMPONENTS

1 Copper Strip DIN 1791-1.75 X 0.35MM- 0421129

00.30Kg.

2 Bristal bunch for 35mm brush 4429098

0.0070Kg.

3 Bristal bunch for 48mm brush - 0880251

0.0100Kg.

4 Spring Feeder (RSK)- 4448039 2Nos.

5 Screw PAN 2.2 X 9.5C - 0028138

1No.

6 Ferrite dumping bead -0818161 1No.

7 Stranded wire red- 7 strands 0700926

0.1400Mtrs.

C1654 Hair Curler Model No. 4522

8 Stranded wire blue - 7 stand 0702090

0.1400Mtrs.

C319

9 Wire and Terminal - 0716319 2No.

10 InsulatingTube (RSK) -0811240 0.0900Mtrs.

11 Fixed Contact 1- 4475004 1No.

12 Fixed contact 2- 4475005 1No.

13 Rotary Contact 1- 4475009 1No.

14 Rotary Contact 2-4475010 1No.

15 Power Cord -2 Core/ 2 Pin - 4830803

1No.

16 Metal Cap- 4523011 1No.

17 DC miniature motor - 1000W - 4457080

1No.

18 Fan (RSK) 4523003 1No.

19 Pin (RSK) -0710945 1No.

20 Aluminium Electrolytic Capacitor -0622053

2No.

21 Paper/Polyester Capacitor - 0623998

1 No.

22 Diode By 398 (RSK) - 0630574 1No.

23 Switch (RSK) - 4522062 1No.

24 Diode in 4004- 630632 4Nos.

25 Insulating tube for PCB - 0811204

0.0300Mtrs.

26 MICA Nite- 4523006 6Nos.

27 Terminal 01- 4523024 2Nos.

28 Terminal Taping - 4522043 2Nos.

29 Terminal 02- 4523062 2Nos.

30 Thermostat (RSK)- 0716439 1No.

31 Switch connecting rod - 4523007 1No.

32 Speed nut- 066107 1No.

33 Lever Rod OR connecting Rod- 4522005

1 No.

34 Heat Cap - 4523010 1No.

35 Sticker -0855126 1No.

1 No. (0.510Kgs)

1 Acrylonitrilebutadiene Styrene White (ASA Luran S 778 T)

0.041Kg

2 Polycarbonate Black (Makrolon 2805 Black)

0.023Kg.

3 Polyamide Glass Filled 35% (Ultramid B 35)

0.021Kg.

4 Polyamide (Zytel FR 720) 0.013Kg

5 Polycarbonate White ( Makrolon 2805 White)

0.122Kg.

6 Polyamide (POlyloy A 709) 0.032Kg.

7 Heating Element Wire 1-0.320mm

0.004Kg.

8 Heating Element Wire 2-0.258 0.004Kg

B) COMPONENTS

C1655 Hair Dryer Model No. 4548

1 Brush with plastic bristle - 1 No.

C320

4471855

2 Brush with nylon bristle- 441854 1 No.

3 Brush round with handle - 4479853

1 No.

4 Sticker double side - 4471031 1 No.

5 Screw M 2.6 X 6 - 0034116 2 No.

6 Ceramic capacitor (Single layer) -0622128

1 No.

7 Round Sticker Black - 4447043 1 No.

8 DC miniature motor - 1000W- 4457080

1 No.

9 Fan moulded - 4547067 1 No.

10 Thermostate -0716319 1 No.

11 Terminal 01-4447046 1 No.

12 Terminal 03- 4447047 2 Nos.

13 Micanite- 1width 15.50mm - 4471009

2 No.

14 Micanite - 2width 12.08mm - 4471010

4 Nos.

15 Mica Separator - 4471046 2 Nos.

16 Terminal 02 - 4471029 2 Nos.

17 PCB Unpopulated 4447003 1 No.

18 Diode IN 4004-0630632 4 Nos.

19 Diode BY 298- 0630441 1 No.

20 Switch PSK- 4548001 1 No.

21 Rivet B2*0 - 0144141 2 Nos.

22 Connecting Terminal - 4473023 1 No.

23 Cable Sleeve - 4532055 1 No.

24 Switch Slider - 4516002 1 No.

25 Cable Tie-0716270 1 No.

26 Power Cord- 2 core/2 Pin -4830801

1 No.

27 Cord Clamp- 4905343 1 No.

28 Trilock Screw- 0031129 1 No.

29 Screw 2.3 X 5.5 - 5550016 1 No.

30 Screw 5.3 X 13.0 - 0031003 2 Nos.

31 Rubber pad round - 4471019 2 Nos.

32 Rubber Pad oval- 4547078 2 No.

1 No. (2.14Kgs)

1 Acrylonitrilebutadienes Styrene White (ASA Luran S 778 T)

0.374Kg.

2 Polyoxymethylene (POM Hosta Form C 9021)

0.100Kg.

3 Polypropylene Natural (PP Hosta Len PPN 1060)

0.103Kg

4 Polypropylene Black (PP Hostalen Black PPN 1060)

0.121Kg

C1656 Mixer Grinder with food Chopper Model No. 3249

5 Acrylonitrilebutediens Styrene Clear (Luran Clear Grey 388 S)

0.066Kg.

C321

6 Polyoxymethylene Master Batch 0.001Kg

B) COMPONENTS

1 Universal Motor -750 W- 4249525

1No.

2 Speed Switch- 4259011 1No.

3 Diode BY 252 ZK- 630478 1No.

4 Resistor 150K- 0612910 1No.

5 Light Emiting Diode - 4249830 1No.

6 Stranded Wire Red VDE 08 12-16

0.274Mtrs.

7 Stranded Wire Black VDE 0812-16 Strands -702103

0.635Mtrs

8 Stranded Wire Blue CDE 0812-16 Strands - 702090

0.336Mtrs.

9 Flat Plug- 710969 6Nos.

10 Thermostat - 4291053 1No.

11 Cu Wrapper ZK- 4291025 1No.

12 Resistor PTC ZK- 4291810 1No.

13 Shrink Tube Cut - 4291024 1No.

14 Insulation Leatheroid- 4243182 1No.

15 Polyester Foil - 16mm width - 805162

0.04Mtrs.

16 Capacitor X Foil EN 132400 - 622202

1No.

17 S.s.Clamp -4249035 1No.

18 Pan Screw 4.2 X 16 ZK -028140 4Nos.

19 Metal Washer B 4.3 ZK -0108111

4Nos.

20 Slider Plate - 4250030 1No.

21 PIN (CAM) -4250031 1No.

22 Screw Counter Sunk 2.9 X 13-028209

2Nos.

23 Pan Screw 3.5 X 16 ZK - 028149 3Nos.

24 Rubber Legs- 4243054 3Nos.

25 Power Cord-2 Core/2 Pin -3210465

1No.

26 Terminal with screws - 717253 1No.

27 Pan Screw 2.9 X 13- 028065 2Nos.

28 Cord Clamp - 4905343 1No.

29 Grooved Pin-Din -1472- 0125201

3Nos.

30 Quick lock washer- 109705 3Nos.

31 Spring ZK - 4250029 3Nos.

32 Cutter Pair- 4249833 1No.

33 Round Head Rivet for Chopper- 140109

4Nos.

34 Sealing Washer - 4250023 1No.

35 Paper Laminated Stricker - 1No.

C322

4249096

36 Ball Holder - 4249107 1No.

37 Ball ZK- 4249099 1No.

38 S.S. tube Sleeve- 4249105 1No.


100 Kg. 1 Chromium Metal OR

3.86Kg

1 High Carbon Ferro Chrome (chromium Content of 52-60%) OR

7.02KG.

1 Low Carbon Ferro Chrome (chromium content of 65-70%) OR

5.67kg.

2 Ferro Molybdenum (Molybdenum content of 60-70%)

0.85Kg

3 Ferro Tungsten (with Tungsten content of 75%)

0.67Kg.

4 Nickel pellets/Shots 3.06Kg.

5 Cobalt 1.6Kg.

6 Boron 0.3Kg

C1658 Valve Seat Insert made of Alloy Steel of following Composition:-(i) Chromium 2, 4-4.8%, (ii) Molybdenum 0.36-0.72%, (iii) Tungston 0.5%, (iv) Nickel: 1.5-4.5%, (v) Cobalt: 1.6%, (vi) Boron: 0.3%, (vii) Iron and Carbon: Balance

7 Melting scrap of mild steel 86.8Kg.

C1659 Molybdenum Fine Wire (below 0.5mm Dia)

1 Kg 1 Molybdenum Wire (above 0.8mm Dia)

1.08Kg.

C1660 Ratchet Wheel Plates 1 Kg 1 SS Sheets/Coils made of AISI 304 Grade (HR)

1.50Kg.

1 No. 1 Spring 1No.

2 Body 1No.

3 Diaphragm 1No.

4 Rivet Contact 1No.

C1661 Oil Pressure Switch for Motor vehicle

5 Relevant Screw 1 No. on net to net basis

1 No. 1 MS Terminal Screw 2Nos.

2 Plastic Base 1No.

3 Plastic Cover 1No.

4 Brass Base Plate 1No.

5 Invar Rod of relevant size 1No.

6 Brass Top Plate 1No.

7 Ceramic Striker 1No.

8 Brass Pillar Terminal 1No.

9 Brass Clibration Nut. 1No.

10 Berilium Copper Switch Blade 1No.

11 Silver Contact fixed 1No.

12 Brass Pillar Terminal 1No.

13 Plastic Knob 1No.

C1662 Rod Thermostate of Different size

14 Silver Contact Moving 1No.

C323

15 Epoxy Adhesive 0.12Ml/piece

1000 Mtrs. 1 Copper Cathode/CC Rod/Wire Bars/Ingots.

251.713Kg.

2 PVC Resin 129Kg.

3 Pthalate Plasticize (DOP) 64.5Kg.

C1663 PVC Insulated unarmoured control purpose copper cable upto 1.1KV Size: 112/0.275mm (6.8Sq.mm) X 4 Core 4 Fillers (Calcium

Carbonate/Alumina/Talc/Kaoline).

21.5Kg.

1000 Mtrs. 1 Copper Cathode/CC Rod/Wire Bars/Ingots

223.8Kg.

2 PVC Resin 126.8Kg.

3 Pthalate Plasticize (DOP). 63.4Kg.

C1664 PVC INsulated Unarmoured Control purpose copper cable upto 1.1KV Size 112/0.30mm (8sq.mm) X 3 Core. 4 Fillers (Calcium

Carbonate/Alumina/Talc/Kaoline 21.13Kgs.

1000 Mtrs. 1 Copper CAthode/ CC Rod/Wire Bars/Ingots

88.102Kg.


3 Pthalate Plasticize (DOP). 47.427Kg.

C1665 PVC Insulated Unarmoured control purpose copper cable upto 1.1KV. Size 72/0.24MM (3.35Sq.mm) X 3 Core 4 Fillers (Calcium

Carbonate/Alumina/Talc/Kaoline).

15.828Kg.

1000 Mtrs. 1 Copper CAthode/C Rod/Wire Bars/Ingots.

117.456Kg.


3 Pthalate Plasticize (DOP) 57.3Kg.

C1666 PVC Insulated Unarmoured Control purpose copper cable upto 1.1KV, Size72/0.24mm (3.35sq.mm) X 4 core. 4 Fillers (Calcium

Carbonate/Alumina/Talc/Kaoline)

19.1Kg.

1 Kg. 1 Alloy/Non Alloy Steel Plates of relevant grade OR

1.2Kg C1667 Harrow Disc Plain

1 Alloy/ Non Alloy Steel Billets 1.40 kg

C1668 Ring Gear Blank made of non alloy steel

1 Kg 1 Non Alloy Steel Bars 1.03 Kg.

1 No. 1 Stainless Steel of relevant grade. 1.16 Kg/Kg content in the export product.

2 Getter Pills 1No. net to net

C1669 Stainless Steel 3 container lunchmate

3 Polypropylene Granules 1.05 Kg/1.05Kg content in the export product.

1 No. 1 Aluminium Foil/Foil Stock 156.00 Kgs/per Cubic meter of media.

2 Molecular Sieve (Powder/Pellet)/Silica Gel Powder)

Net to net

3 Clear Water based catalysed coating with relevant catalyst.

19.20 Kgs. per Cubic metre of media.

4 Relevant Adhesive 128.00 Ltrs./per Cubic metre of media.

C1670 Heat Recovery Rotor (1 No. Heat recovery rotor of 1 cubic meter having flute height of 1.5mm)

5 Relevant Thinner/Solvent. 16.70 Liters per Cubic metre of media.

Note: In case of "Sensible" Heat Recovery Rotor, the input with quantity appearing at import item No. 1

C324

& 4 shall only be allowed.

1No. 1 Aluminium Foil /Foil Stock. 122.00 Kgs./per Cubic Metre of Media.

2 Molecular Sieve (Powder/Pellet)/Silica Gel Powder)

Net to net

3 Clear water based catalyzed coating with relevant catalyst.

15.10 Kgs. per Cubit metre of media.

4 Relevant Adhesive 99.5 Litres/per Cubic metre of media.

5 Relevant Thinner/Solvent 13.10Litres per cubic metre of media.

6 Gear Motor 1 No.

C1671 Heat Recovery Wheel (1 No. Heat recovery wheel incorporating Rotor of 1 Cubic Mtr. volume having 1.9mm flute height).

7 Speed Controller for Motor 1 No.

In case of "Sensible" Heat Recovery Wheel, the input with quantity appearing at import item No. 1 & 4 shall only be allowed.

1 MT 1 Asbestos Raw .70 MT. C1672 Asbestos Brake Linings (Rubberised with Nitrile Rubber)

2 Nitrile Butadine Rubber (NBR) .22 MT

1 Kg. 1 Tin Ingots OR

1.02 Kg/Kg content in the resultant product.

1 Tin Scrap 1.06 Kg/Kg content in the resultant product.

2 Antimony Ingots. 1.02 Kg/Kg content in the resultant product.

3 Copper Scrap OR


3 Copper Wire Bar/Cathode 1.02 Kg/Kg content in the resultant product.

4 Lead Scrap OR


4 Lead Ingots. 1.02 Kg/Kg content in the resultant product.

5 Zinc Scrap OR


5 Zinc Ingots/Slab 1.02 Kg/Kg content in the export product.

C1673 Tin Alloy Ingot/ Anode/ Bar/ Slabs/ Pig

6 Bismuth (Elemental Form) 1.02 Kg/Kg content in the export product.

1 No. 1 Bourdon Tube 1 No.

2 Diaphragm 1 No.

C1674 Bourdon Sensing Pressure Gauge

3 Pointer 1 No.

C1675 Anchor Plate for Dredging made of CR Non Alloy Steel.

1 No. 1 Cold Rolled Non Alloy Steel Sheets/Wide Coils/Strip.

1.02 Kg.

C1676 Taps of high speed steel 1 No. 1 HSS ground blanks of relevant grade and size for taps.

1NO.

C325

1000 Mtrs For export item (A) 1) Copper Cathode/CC Rods/Wire Bar/Ingot.

56.975 Kgs.

2) PVC Resin 87.3 Kg.

3) Pthalate Plasticiser (DOP) 43.65 Kg.

4) Fillers (Forcal) 14.55 Kg.

For export item (B) 1) Copper Cathode/CC Rods/Wire Bar/Ingot.

33.926 Kgs.

2) PVC Resin 32.382 Kgs.

3) Pthalate Plasticizer (DOP) 16.191 Kg.

C1677 (A) PVC Insulated Unarmoured Control purpose copper cable core area 1.62 Sq.mm. Size: 35/0.24mm X 4 Core(B) 2 Core X 1.5Sq.mm PVC Insulated & Sheathed cable with 1.0Sq.mm EArth conductor

4) Fillers (Forcal) 5.702 Kg.

1 Kg. 1 Platinum metal 1.01 Kg. per Kg. content in the export product.

2 Pallaidum 1.01 Kg/Kg content in the export product.

C1678 Platinum/Rhodium/Palladium Catalyst Gauzes of different composition.

3 Rhodium in powder form 1.01 Kg/Kg content in the export product.

1 Kg. 1 Aluminium Scrap (Taint & Tabor)

1.17 kg/kg aluminium content in Ferro Aluminium

C1679 Ferro Aluminium

2 Mild Steel Scrap 1.024 kg/kg Iron (Fe) content in Ferro Aluminium

1 No. 1 Cold Rolled Non- oriented (CRNO) electrical Steel in Coil form OR Sheet in coil form.

8 Kgs.

2 Copper wire bars/CAthodes/Rods/winding/winding wires/strips

0.975 Kgs.

3 a) Electrolytic Grade Aluminium ingot for rotor.

0.705 Kgs.

b) Commercial grade Aluminium ingot for housing.

0.705 Kgs.

4 Stainless Steel Rod for Shaft. 0.686 Kgs.

5 Relevant Ball/Sleeve/Roller Bearings.

2 Nos.

6 Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape.

CIF value restricted upto 5% of FOB value.

7 Packing material-Craft paper Lable, Name Plate, Ribbon


8 Motor Protectors/Thermal Protectors.

1 No.

9 Power Capacitors. 1 No.

10 Plastic Insulated Wire/Cable. 6 mtrs.

11 Terminals, Connectors. 8 Nos.

12 Non ferrous impeller -Copper 0.567Kgs.

a) Tin. 0.068Kgs.

C1680 Power driven centrifugal Pump with motor or frame size 1071 (0.5HP).

13 Mechanical Seal 1No.

C1681 Power driven centrifugal pump with motor of

1 No. 1 Cold Rolled Non-oriented (CRNO) electrical Steel Sheets

4.5Kgs.

C326

OR Sheets in Coil Form.

2 Copper wire bars/Cathodes/Rods/Winding/Winding wires/strips.

0.822Kgs.


0.493Kgs.


0.492Kgs.

4 Stainless Steel Rod for Shaft. 0.320Kgs.


2Nos.

6 Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, Tape.

Upto 1.5% of FOB value

7 Packing material-Craft Paper Lable, Name Plate, Ribbon



1No.

9 Power Capacitors. 1No.

10 Non Ferrous impeller (a) Copper (b) Tin

0.190Kgs. 0.042Kg.

frame size 1063 (0.5HP).

11 Mechanical Seal 1 No.

1 No. 1 Cold Rolled Non- oriented (CRNO) Electrical steel sheets OR Sheets in Coil Form

10.01Kgs.

2 Copper Wire Bars/Cathodes/Rods/Winding/Winding wires/Strips.

1.36Kgs.


0.74Kgs.


0.74Kgs.

4 Stainless Steel rod for Shaft. 0.796Kgs.


2Nos.

6 Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, Tape.

upto 1.5% of FOB Value.

7 Packing material-Craft paper Lable, Name Plate, Ribbon


8 Motor Protectors/Thermal Protectors

1No.

9 Power Capacitors 1No.

10 Plastic Insulated Wire/Cable. 6Mtrs.

11 Terminals, connectors. 8Nos.

12 Non ferrous impellers (a) Copper (b) Tin

0.595Kgs. 0.087Kgs.

C1682 Power driven centrifugal pump with 0.75 HP motor.

13 Mechanical Seal 1No.

C1683 Power driven centrifugal pump with 1HP motor.

1 No. 1 Cold Rolled Non-Oriented (CRNO)Electrical Steel Sheets OR Sheets in Coil form.

12Kgs.

C327

2 Copper Wire bars/Cathodes/Rods/Winding/Winding wire/Strips.

1.975Kgs.


1.127Kgs.


1.126Kgs.

4 Stainless Steel rod for Shaft. 1.40Kgs.

5 Relevent Ball/Sleeve/Roller bearings.

2Nos.

6 Insulation material consisting of paper, Nylon, Nomex Film, Varnish, Polyester Cord, Tape.

upto 1.5% of FOB Value.

7 Packing material - Craft paper Lable, Name Plate, Ribbon



1 No.

9 Power Capacitors. 1No.

10 Plastic Insulated wire/Cable. 6Mtrs.

11 Terminal Connectors. 8Nos.

12 Non Ferrous impeller (a) Copper (b) Tin

0.931Kgs. 0.136Kg.

13 Mechanical Seal. 1No.


1 No. 1 Eddy Current meter 1No.

2 Cluth Break 1No.

3 Overload Protector 1No.

4 Fly Wheel 1No.

5 Carbon Steel of relevant grade. 1.05Kg/Kg content in the export product.

6 AG Break Motor 1No.

7 Rotary Cam Switch 1No.

8 Slide Counter 1No.

9 Motor Lubrication unit 1No.

10 Bearing case 1No.

11 Spherical Roller Bearing. 1No.

12 Ball Bearing. 2No.

13 C Roller Bearing. 1No.

14 Surge Tank 1No.

15 Alloy Steel of relevant grade. 1.05/Kg content in the export product.

16 Front GIB Plate right hand 1No.

17 Front GIB Plate for 100T Press left hand

1No.

18 GIB Plate Rod 2Nos.

19 MS Plates 1.05/Kg content in the export product.

C1685 Ultra Press

20 Gear End Plate 1No.

C328

21 Cylinder 1No.

22 Worm wheel 1No.

23 Dual Solenoid valve 1No.

C1686 Mineral Insulated Resistance Temperature Detector (RTD) Assembly

1 No. 1 RTD Element of relevant specification

1 No.

1 kg. 1 Tungsten Rod 0.95kg C1687 Tungsten Contact having 55%+/-2% Tungsten by weight

2 Abrasive Wheel 3Nos.

C1688 Deleted

1000 Sets 1 Halogen Lamp (6 V or 12V - 20W or 30W)

1000Nos.

2 Stainless Steel Hard Wire 1.60mm

32Kgs.


32Kgs.


32Kg.

5 Step -down transformer/power supply Unit input 120 V or 240 V out put 6 V or 12 V.

1000Nos.

6 Power Cord with Plug. 1000Nos.

7 On-Off switch 1000Nos.

8 Relevant Achromatic objective lens.

1000 Sets

9 Lamp Holder 1000Nos.

10 Socket with fuse. 1000Nos.

11 Polyurethane Paint/Grease, Stainless Steel Screws, Circlips, Spring Washers, Hardened & Straightened Ground Shaft upto 5mm Dia, Strain Relieves Adhesive, Rubber or Plastic parts and Connectors


C1689 Monocular/Binocular Microscope

12 Raw Optical Glass 218.6 kg

1 pair 1 C/V Joint Boot Seal 2Nos.

2 T/P Boot Seal 2Nos.

3 Clamps 6Nos.

4 Molykote VN 2461 C Lithium Grease

0.25Kg.

5 C V Joint Grease 0.25Kgs.

6 Shaft Ring Blank 2Nos.

7 T/P Housing Blank 2Nos.

8 C/V Outer Race Blank. 2Nos.

9 Spider Tripot Joint 2Nos.

C1690 Drive Shaft Assembly, Front Wheel Drive- LH/RH without ABS Ring.

10 C/V Inner Race. 2Nos.

1 pair. 1 C/V Joint Boot Seal 2Nos.

2 T/P Boot Seal 2Nos.

C1691 Drive Shaft Assembly, Front Wheel Drive- LH/RH with ABS Ring.

3 Clamps. 6Nos.

C329

4 Molykote VN - 2461 C Lithium Grease

0.25Kg.

5 C V Joint Grease 0.25Kgs.

6 Shaft Ring 2Nos.

7 T/P Housing Blank 2Nos.

8 C/V Outer Race Blank 2Nos.

9 Spider Tripot Joint. 2Nos.

10 C/V Inner Race 2Nos.

11 ABS Ring 2nos.

1 No. 1 Stainless Steel Sheet/Coil of relevant grade


2 Gas Valve with/without Ignition Unit.

Net to net with accountability

C1692 Stainless Steel LPG Stove with /without auto ignition .

3 Brass Honey Scrap 1.06Kg/Kg content in the export product.

If the product is exported without Auto Ingnition Unit, the import item no.2 viz. Gas Valve shall be allowed without ignition Unit.

C1693 Hot Forged Steel nuts 1 No. 1 Forged Blank Nut without thread of relevnt grade of alloy/non alloy steel and of relevant size.

1No.

1 kg. 1 MS Bright Bars/Wire Rods. 0.97Kgs. C1694 Copper Bonded Ground Rods UL approved (0.01 inches copper coating).

2 Copper Bar/Cathodes/Wire Bars. 0.08Kgs.

1 No. 1 CRGO/ CRNO Lamination E & I Strips OR

1.10 kgs/kg content in the export product.

CRGO/ CRNO Steel Sheet/Coils 1.07 kgs/kg content in the export product.

2 Relevant Copper Wire (Coated including enamelled / self solderable enamelled or uncoated)

1.01 kgs/kg content in the export product.

3 Mylar Polyester film of relevant thickness and width

1.02 Mtrs/ Mtr content in the export product.

4 Electrical Grade Insulating Tape (18 to 45 mm width, with or without adhesive)

1.02 Mtrs/ Mtr content in the export product.

5 Relevant Nylon 66/ Polybutalene Terrapthe-late/ Polyethylene Terrapthelate/Nylon6/Polyphenylene Sulphide/PET OR Bobbin

1.02 kgs/kg content in the export product Net to Net

6 Deleted

7 Relevant PVC or Lead Wire / Cable

1.01 Mtrs/Mtr content in the export product

8 a) PVC Sleeve Net to net

b) Terminal OR

Net to net

Insulated Faston Terminals/fully vinyl Insulated Female disconnects 250 Series

Net to net

C1695 Transformers upto 500 VA

9 Electrical Insulating Paper/ 1.02 Kgs/kg content

C330

Nomex paper of relevant GSM in the export product

10 Housing Net to net

11 Varnish/Epoxy Resin/Thinner/Hardener /Lacquers

CIF value limited to 1% of FOB value

1 No. 1 Shaft & Wheel. 1No.

2 Hoising Turbine Casting 1No.

3 Seal, Split Ring. 1No.

4 Collar Thrust. 1No.

5 "O" Ring 1No.

6 Circlip 1No.

7 Slinger, Oil 1No.

8 Nut lock 1 No.

9 Impeller 1No.

10 Seal, Split Ring. 1No.

11 Thrust Bearing 1No.

12 Journal Bearing 1No.

13 Retaining Ring. 1No.

C1696 Turbocharger

14 Pin roll 1No.

For 100 Ampere Hour.

1 Nickel Fibre Mat Fibrex 6.25SFT.

OR Nickel Powder Type 287/255/210

0.7Kg

2 Non -Woven Separator 2.81 M2

3 Nickel Powder Type 287/255/210

0.625Kg.

4 Celgard 3400/3500 film. 2.5M2.

5 Vented Filler Caps. 1No.

C1697 Nickel Cadmium Cells (Sintered plate) 1.2 Volts as per European Standard EN 2570 or equivalent.

6 Nylone Moulding Granule/Powder.

0.512Kg.

1 Kg. 1 AluminiumAlloy ingots/ scrap of relevant grade OR

1.10 Kg/ kg content in the export product.

a) Aluminium Ingots 1.10 kg/kg content in export product.

C1698 Aluminium Alloy Cast Flanges.

b) Relevant alloying elements such as silicon metal, manganese metal, magnesium metal etc.


1 No. 1 Black Polyester Film (0.135x23 mm)

0.0182 Meter

2 Transformer KB10 1 No.

3 Lens Meniscus- Front 1 No.

4 Lens Meniscus- Black. 1No.

5 Spring High Energy. 1No.

6 Reflector 1No.

7 Lense, Objective 1No.

C1699 35mm KB 10 Photographic Camera.

8 Lense, Eye. 1No.

C331

9 Spring Shutter Return. 1No.

10 High Voltage Diode. 1No.

11 Spring Contact- Battery, Negative

1No.

12 Neon Lamp 1No.

13 Trigger Transformer (KB 10). 1No.

14 Reflector Cover. 1No.

15 Reflector Mount. 1No.

16 Capacitor, Ceramic, 1000pF. 1No.

17 Capacitor, Electrolytic, 160uF. 1No.

18 Flash Tube, Xenon Gas. 1No.

19 Transistor Power 2 S D965 1 No.

20 Lubricomp PDX-D-5373 KOD BK8 115

1.15gms.

21 SS Strip .007" X 1.25" T 301 1/2 H

1.14gms.

22 SS Strip 0.006" X 1" Plated with Nickel.

0.37gms.

23 SS 0.008"X1.65" CT 301 1/2 H 2.83gms.

24 CU-Ni Alloy Strip 0.015" X 1.875" EK 435

1.897gms.

25 K20 Foam Sheet 3 mm thick 560 Sq.mm


1 Kg 1 Calcium Metal Granules (Ca content 98% min).

1.02Kg/Kg Calcium Granules content

C1701 Ferro Calcium Cored Wire (containing calcium granules & Iron Powder) 2 Iron Powder 1.015Kg/Kg Iron

powder content.

1 Kg. 1 Unwrought Silver having purity more then 99.9%.

1.03Kg/Kg content of silver in the export product.

C1702 Silver Contacts/Silver Alloyed contacts or Wire/Silver profiles contacts/Silver Bimetal Contacts/Silver Bimetal Profiles/Sheet Contacts/Silver Contacts on Carrier/Silver Alloyed Contacts on Carrier/Non-Ferrous Metal Contacts.

2 Any other relevant metal(s)/alloying metals(s)

1.03Kg/Kg content of relevant metal/alloying metal in the export product.

1 Kg. 1 Electolytic Prime Quality Tinplate of relevnt thickness.

1Kg. C1703 Lacquered Electrolytic Plate Sheet.

2 Relevant Lacquer. 0.01Kg.

1 Kg. 1 Copper Clad/Coated Steel wire more than 1mm diameter.

1.02Kg.

2 Wire Drawing Dies, Drawing Lubricants welding Dies.

2% of the FOB vlaue of export.

C1704 Copper Clad/Coated Steel Wire Single or Stranded having single wire less than 0.5mm dia.

3 Plastic Bobbins, Plastic Spools, protecting paper/films.


C1705 1) Resistance wire: single or stranded or wound on Fibre Glass Core having single wire less than

1 Kg. 1 a) Copper Nickel Alloy Wire 1.00mm or more diameter OR Nickel Chromium Alloy Wire 1.00mm or more diameter.

1.00Kg. 1.00Kg.

C332

2 Alloy Master batches/Wire Drawings Dies/ Welding Dies Glass Fibre Yarn.

2% of the FOB value of export.

0.5mm, using(a) Copper Nickel Alloy(s) OR (b) Nickel Chromium Alloy(s). 3 Plastic Bobbins, Plastic Spools,

Protective paper/film, drawing Lubricants.


Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in export product (a) or (b).

C1706 Pump set with AC SQ Induction motor.

1 Set. 1 AC SQ Induction motor of relevant wattage & Speed.

1 No.

1 No. 1 Electrolytic Manganese Dioxide. 10.34gms.

2 Zinc Powder 4.12gms.

3 Potassium Hydroxide Flakes. 1.6gms.

4 Zinc Oixide Powder 0.07gms.

5 Crystalline Graphaite Powder/Synthetic/Natural Graphite.

0.628gm.

6 Gallant Powder/Galling Agent I & II

0.043gm.

7 Indium Acetate Powder. 0.0024gm.

8 Sealent/Asphati Piton C/A & P/T.

0.04gm.

9 Surfactant. 0.0002gm.

10 Paper for laminated Non-Woven Separator/(Main & Bottom)

0.172gms.

11 Nickel Plated Steel Cane OR Non Alloy Steel Sheet.

1No. 5.9gms.

12 Tin Plated Brass Wire/Conductor 0.43gm.

13 Nylon/Plastic Top. 1No.

14 Re-inforcing Support Ring OR Nickel Chromium Alloy Wire 1.00mm or more diameter.

1No. 1.26gms.

15 Negative Steel Cap OR Non Alloy Steel Sheet.

1 No. 0.736 gms.

16 PVC Shrink Foil/Shrink Sleeve. As per packing policy.

17 PVC Label OR Self Adhesive PVC Sheet for Label.

1No. 4.2Sq.inch.

18 Duplex Board for packing. As per packing policy.

19 Carbon Coating/Carbon Paste. 0.026gms.

20 NS Clean 1% of FOB value, if non alloy steel sheet for cap, can & ring are imported)

C1707 AA Alkaline Battery (24gms)

21 Press Oil 1% of FOB, if non alloy steel sheet for cap, can & ring are impoorted.

C1708 Cooling Tower complete including in completely

1 No. (weight

1 Isopthalic Polyester Resin. 630gm/Kg GRP Component content

C333

alongwith contents of various input to be indicated).

in the export.

2 Glass Roving/chopped strand mat/surface mat/woven rovings.

420gm/kg GRP component content in the export product

3 Polypropylene. 1.05Kg/Kg polypropylene component content in the export product.

4 PVC Fill Sheet 1.05Kg/Kg PVC fill sheet component content in the export product.

OR The following inputs with their quantity for making 1Kg. of PVC fill sheet:-

a) PVC Resin (Suspension Grade) 0.945Kg.

b) Titanium Dioxide. 0.060Kg.

c) Processing Aid. 0.011Kg.

d) Impact Modifier 0.014Kg.

e) Paraffin Wax. 0.005Kg.

f) Calcium Citrate. 0.003Kg.

g) Lubricant/Heat Stabiliser. 0.038Kg.

h) Filler (Calcium Carbonate) 0.021Kg.

i) Carbon Black. 0.002Kg.

5 Relevant Bearings Net to net basis with accountability clause.

6 Plywood/Pine Lumber 1.05 cub.meter/cub.meter content in the export product

7 SS Tube of relevant size OR Stainless Steel Plates/Sheets

1.02 Mtr./Mtr. content in the export product. 1.05 kg/kg content in the export product

8 Mild Steel Universal 1.05 kg/kg content

9 Arsenic Pentaoxide 0.7063 Kg/M3 of Plywood / Pine Lumber used

10 Cabosil/Fumed Silica Upto 2% of the quantityof isophthalic Polyester Resin used

knocked down condition, with or without accessories and other parts.

11 Foam Core Resin Upto 2% of the quantity of glass roving/chopped strand mat/Surface mat/woven roving used

C1709 Suspension Hanger made of Stainless Steel Wire-

1 Kg. 1 Stainless Steel Wire Rods- Grade AISI 302


C334

Grade AISI 302.

1 Kg. 1 Copper Wire Rod/Cathodes. 1.01 Kg/Kg content in the export product.

C1710 Polyesterimide Enamelled Copper Wire/Strip. 2 Polyestermide Enamel. 1.01 Kg/Kg content

in the export product.

1 Kg 1 Tin Free Steel / Wide Coils 1.06 Kg/Kg content in the export product.

C1711 Plastic (Ethylene Co-polymer) Clad/ Coated Tin free Steel Tapes for cable armouring containing 93% Tin free Steel and 7% plastic

2 Plastic (Ethylene Co-Polymer) 1.05 Kg/Kg content in the export product.

C1712 Bathroom jali with frame size 20Cm X 20 Cm made of stainless steel sheet grade AISI 430.

1 Kg. 1 Stainless Steel Sheet Grade- 430 1.30 Kg/Kg content in the export product.

C1713 Ventilation jali with frame having hole made of stainless steel sheetgrade AISI-430.

1 Kg. 1 Stainless Steel Sheet Grade AISI -430


1 MT. 1 M.S. Scrap. 535.00 Kg.

2 Carbon. 21.40 Kg.

3 Ferro L.C. Chrome 42.80 Kg.

4 Ferro H.C. Chrome 42.80 Kg

5 Pure Chromium 749 Kg.

6 Ferro Molybdenum 128.40 Kg.

7 Nickle. 171.20 Kg.

8 Cobalt. 214.00 Kg.

9 Ferro Tungsten. 42.80 Kg.

10 Tungsten 128.40 Kg.

C1714 High Chromium Valve Seat inserts with Chromium content 35% or more.

11 Boron 64.20 Kg

C1715 Abrasive Stone with Grain Bond of ratio 57:43.

1 Kg. 1 Silicon Carbide. 0.57 Kgs.

1 Metre. 1 EC Grade Aluminium Rod/Ingots.

0.812 Kg/Metre.

2 Commercial Grade Aluminium Rod/Ingots.

1.0128 Kg/Metre.

3 XPE Semi Conducting compound.

0.0467 Kg/Metre.

4 XLPE Insulation. 0.4487 Kg/Metre.

5 PVC Resin. 0.238 Kg/Metre.

C1716 Aluminium Conductor 1C x 300 Sq.mm 11/11KV (UE) XLPE insulated and screened, aluminium wire screeing over insulation and armouring ALXLPE PVCS, AWA PVC Cable Minimum export weight 2681.6 Kg/Km.

6 DOP 0.1165 Kg/Metre.

1 Meter. 1 EC Grade Aluminium Rod/Ingots.

0.812 Kg/Metre.

2 Commercial Grade Aluminium Rod/Ingot

1.638 Kg/Metre.

3 XLPE Semi-Conducting Compound.

0.056 Kg/Metre.

C1717 Aluminium Conductor 1C x 300 Sq. mm 19/33 KV (E) XLPE insulated and screened, aluminimum wire screening over insulation

4 XLPE Insulation. 0.806 Kg/Mtr.

C335

5 PVC Resin 0.365 Kg/Mtr. and armouring ALXPE PVCs AWA PVC Cable - Minimum export weight 3850Kg/Km.

6 DOP 0.1797 Kg/Mtr.

1 Metre. 1 EC Grade Aluminium Rod/Ingots.

1.484 Kg/Metre.


0.428 Kg/Metre.

3 XLPE Semi-conducting Compound.

0.1918 Kg/metre.


5 PVC Resin. 1.227 Kg/metre.


C1718 Aluminium Conductor 3 core X 185Sq. mm 11/11 KV (UE) XLPE insulated and screened, aluminium wire screening over individual core ALXPE PVCs FPVC cable minimum export weight 6745.1 Kg/Km.

7 Galv Flat Steel Wire. 1.183 Kg/Metre.

1 Mtrs. 1 EC Grade Aluminium Rod/Ingots.

0.548 Kg/Metre.


0.4271 Kg/Metre.

3 XLPE Semi-conducting Compound.

0.1386 Kg/Metre.


5 PVC Resin. 0.7475 Kg/Metre.


C1719 Aluminium Conductor 3 Core X 70 Sq. mm 11/11 KV(UE) XLPE insulated and screened, aluminium wire screening over individual core ALXPE PVCs FPVC cable-minimum export weight 4300Kg/Km.

7 Galv Flat Steel Wire. 0.9615 Kg/Metre.

1 Kg. 1 Galvanised relevant steel sheets. 1.05 Kgs. C1720 Cabinet parts made of Galvanised Steel Sheets. 2 Relevant fastners. Net to net.

1 No. 1 Nylon 66 or PBT Plastic Powder. 1.05 Kg/Kg content in the export product.

2 Brass Strip/Rod 1.05 Kg/Kg of brass in the export product.

C1721 Contact element for electrical/electronic switches.

3 Master Batch powder. 1.05 Kg/Kg of the export product.

1 No. 1 Zinc Alloy 1.07 Kg/Kg content in the export product.

2 Nylon 66 or PBT Plastic Powder. 1.05 Kg/Kg content in the export product.

3 Poly-Carbonate plastic powder. 1.05 Kg/Kg content in the export product.

4 Brass Strip. 1.05 Kg/Kg content in the export product.

5 Relevant Silicon Rectifier Diodes (1 AMP).

Net to net.

C1722 Pilot Light (containing relevant Zinc Alloy).

6 Relevant Chip Resistor. Net to net.

1 No. 1 Alloy Steel Bars of relevant Grade.


C1723 Differential Bevel Gears made of Alloy Steel (B forging Process) 2 All Consumables including dies. CIF value restricted

upto 8% of the FOB Value.

C1724 Deleted

1 Kg. 1 Glass Fibre Yarn. 1.01Kg/Kg content in the export product.

C1725 Polyester tap lapped, Nomex paper covered, fibreglass covered 2 Nomex Armid paper. 1.01Kg/Kg.

C336

varnish bonded aluminium conductors.

1 No. 1 Wire protect 0114-0237. 3Nos.

2 Contact Pin 0103-0237. 3 Nos.

3 Screw 3 X 4.5mm 0125-0237. 3Nos.

C1726 237-103 GDS Clamp 2.5Qmm 3 Pole Grey, 0237- 0103/0999-0990/PW 11-0000 (weighing 2.79grams). 4 Polyamide 6.6 Grey 9910-102. 0.79gms.

1 No. 1 Cage Clamp 106-284. 3Nos.

2 Copper STrip Sn/Pb Coated 050-341.

18gms.

C1727 284-621 Terminal Block 35 Qmm/3x10Qmm/0284-0621/0999-0990/PW 11-0000 of diferent colour (weighing 55.2 grams).

3 Polyamide 6.6 of different colours 9910-102.

23gms.

1 No. 1 Cage Clamp 106-280. 2Nos.

2 Current Bar 105-280. 1No.

C1728 280-101 Side Entry Clamp 2.5mm2/ Cage Clamp connection 0280-0101/0999-0990/PW/11-0000 of different colour (weighing 3.96gms.)

3 Polyamide 6.6 of different colours 9910-107.

2.8gms.

1 MT. 1 Quartzite 1570 kg

2 Hydrated Lime 79 kg

3 Silicon Carbide Powder OR 3. Silicon Metal Powder

20 kg 15 kg

4 Dextrine OR 4. Gaulac

20 kg 9 kg.

5 (a) Alloy Steel Mould 0.03 No.

C1729 Silica Bricks/Shapes for Glass Melting Furnace

(b) Wooden Mould 0.01 No.

C1730 Glass Fibre Reinford Plastic Pipe with coupler (containing minimum 75% of glass fibre required for deep well hand pumps).

1 MT 1 Relevant Glass Fibre. 765Kg.

C1731 Magnesium cored wire (containing mangesium granules having Mg. content 99% min.).

1 Kg (Granule content).

1 Magnesium Metal Granules (Mg. content 99% min).

1.02Kg/Kg content.

C1732 Ferro-Silica-Calcium ( FESICA) Cored Wire (containing FESCICA alloy powder having Ca. 28-33%, Si. 57.65%, Fe. 4% min. and A1. T. P & S:traces).

1 Kg (alloy/powder content).

1 Ferro-Silica-Calcium (FESCICA) Alloy powder (containing Ca: 28-33%, Si: 57-65%, Fe: 4% min and Al., Ti, P & S : traces).

1.02Kg/Kg content.

1000 Kg. 1 Cold Rolled Decarburized, Magnesium Oxide (MgO) coated, Silicon Electrical Alloy Steel Strips/ Wide Coils of relevant grade containing 2.5% to 3.5% Silicon

1100Kgs. C1733 Cold Rolled Grain Oriented (CRGO), fully processed, Silicon-Electrical Alloy Steel Sheets/Strips/Wide Coils with insulating coatings of inorganic/organic

2 Relevant Inorganic/Organic coating material.

10Kg.

C337

meterial.

1 Kg. 1 Non Alloy/Alloy/Stainless Steel Rod of relevant grade

1.1 Kg. C1734 Non Cast Hardware Fittings made of Non Alloy/Alloy/Stainless Steel Rod

2 Cutting and profile machine tools: viz (a) Cutters (b) Carbide Tips (c) Drils (d) H.S.S. Taps.


C1735 Pin made of Carbon Steel 1 Kg. 1 Carbon Steel Sheet/Strip or relevant grade.


C1736 Deleted

C1737 Deleted

C1738 Deleted


C1740 Handle Assembly made of Stainless Steel for operation of Butter Fly Valve.

1 No. 1 Stainless Sheet/Strip/Wide Coils made out of relevant grade.


1 Piece. 1 Non Alloy Steel CRCA/HR Sheet/Coil (Second/Defective)

513 Gms. C1741 Coaster Brake Hub for Bicycle containing 263gm of item 1 and 608 gm of tiem 2

2 MS/Non Alloy Steel Round/Rod. 1277Gms.

All the conditions given in note 1 to 8 below SION at C-122 will also be applicble for this SION.

1 No. COMPOMENTS:

1 Pump/ Pump with motor Net to net.

2 Level Switch Net to net.

3 Level Gause Net to net.

4 Flame Relay with base plate. Net to net.

5 Gas Train. Net to net.

6 UV Detector. Net to net.

7 Flexible Cables. net to net.

8 Float. Net to net

9 Stainless Steel Pressure Spring. Net to net.

10 Burner Net to net.

11 Temperature Controller/ Temperature indicator

Net to net.

12 Burner Rod Assembly Net to net.

13 Gate/ Globe Valve Net to net.

14 Straight Way Valve Net to net.

15 Safety valve Net to net.

16 Open Bonnet. Net to net

17 Blowdown Valve Net to net

18 Disc Check Valve. Net to net.

a) Ignition electrode Net to net

b) Oil Flow Meter Net to net

19 RAW MATERIAL: BQ Steel plates (Carbon Steel Plate)


C1742 Industrial Boiler/Sub assemblies of the Boilers.

20 Welding Electrodes and/or 2% of the weight of

C338

Welding Wire. the relevant steel to be welded.

21 Steel Tubes/Pipes of relevant grade and size.

1.02 Metre/mtr content in the export product. OR 1.02 Metre/Mtr content in the export product.

Note: Wherever Welding Wire is asked for import Welding Flux may also be allowed for import equal to the quantity of Welding Wire.

1 No. RAW MATERIAL:- (1) HR/CR Sheet/Strips/Coils.


2 Aluminium Alloy Ingot. 1.07Kg/Kg content in the export product.

3 Seamless Steel Tube of relevant dia, thickness and grade.

Net to net.

4 Butyl Rubber 1.05 kg/kg content in the export product.

5 Isocyanate 1.05 kg/kg content in the export product.

6 Natural Rubber 1.05 kg/kg content in the export product.


8 Relevant Synthetic Rubber (NBR/ PBR)


9 Relevant Paints 6.05 Ltrs for one number of export product.

COMPONENTS:

10 Main shaft assembly Net to net

11 Front Wheel Axle Assembly Net to net

12 Hub Pin Set Net to net

13 Differential Gear Net to net

14 Front Brake Drum Net to net

15 Rear Wheel Axle Assembly Net to net

16 Slider block. Net to net

17 Propeller Shaft (LH+RH) Set. Net to net

18 Hydraulic Brake Assembly. Net to net.

19 Shock Absorber Rear (1set = 2No.)

Net to net

20 Shock Absorber Front. Net to net

21 Gas Spring. Net to net.

22 Ball Brg. 98025 Net to net.

23 Ball Brg. 6204-ZZ. Net to net.

24 Ball Brg. 6302 Net to net

25 Speedometer. Net to net.

26 Control Cable (Set of 11) Net to net.

27 Rear View Mirror Assembly. Net to net.

C1743 Motorized three wheelers in CBU/CKD/SKD condition powered by diesel engines of capacity from 300 c to 550cc.

28 Wire Harness Main. Net to net.

C339

29 Wire Harness Dashboard. Net to net.

30 Battery Cable Negative. Net to net.

31 Battery Cable Positive. Net to net.

32 Electrical Cable & Wires Set. Net to net.

33 Spring Front Suspension. Net to net.

34 Automotive Switchs Set. Net to net.

35 Automotive Bulb (set of 13) Net to net.

36 Automotive lights (Set of 10) Net to net.

37 Lock Set with keys. Net to net.

38 Horn 12 V Dia 90 Net to net.

39 Tool Kit Set. Net to net.

40 Needle Bush-Main Housing. Net to net.

41 Needle Bearing-Crankcase, Front Wheel.

Net to net.

42 Needle Bearing Rear Wheel/Hub. Net to net.

43 Needle Bush JL 188 NRB. Net to net.

44 Inner Ring-Cluster Gear. Net to net.

45 Battery 50 AH. Net to net.

46 Wiper Blade with Arm. Net to net.

47 Wiper Motor. Net to net.

48 Wiper Motor Mounting & Linkage Assembly.

Net to net.

49 Windshield Glass. Net to net.

50 Voltage Regulator. Net to net.

51 Side Window Glasses (Set of 2) Net to net.

52 Rear Window Glass. Net to net

53 Front Wheel Hub. Net to net.

54 Rear Wheel Hub Net to net.

55 Differential Cage. Net to net.

56 Oil Tight Hood Net to net.

57 Flexible Coupling. Net to net.

58 Flywheel Mounted Alternator. Net to net.

59 Starter Motor. Net to net.

60 Cylinder. Net to net.

61 Cylinder Head. Net to net.

62 Piston Assembly. Net to net.

63 Fuel Injection Eqpt. Net to net.

64 Flywheel. Net to net.

65 Feed Pump Net to net.

1 No. (110 Kgs)

1 Non-Alloy steel Plate/Flat 51 Kg.

2 G.P. Non Alloy Steel Sheet. 5 Kg.

C1744 Hydraulic Jacking Beam Model SJ 15

3 Non Alloy Steel Bars/Rods. 14.8Kg.

C340

4 Non Alloy Steel Tube. 40.6Kg.

5 Bearing FAG 6200.2 ZR. 8 Nos.

6 Screw/Nut/Bolt/Washer 1.9Kg.

7 Springs. 11Nos.

8 Mechanical Seals. 12 Nos.

9 Hose Assembly with end fittings. 1 No.

10 PVC/Rubber Grips & Pads. 9 Nos.

1 No. 1 Components Net to net basis except upper and lower housing

2 a) CRNGO Steel upto 3500 Kcal/hr 0.0032 Kg/Kcal

b) More than 3500 Kcal/hr 0.0024 Kg/Kcal

3 a) Copper Wire upto 3500 Kcal/hr 0.0005 Kg/Kcal


4 a) Music Wire Upto 3500 Kcal/hr 0.000016 Kg/Kcal


5 a) Refrigeration Oil Upto 3500 Kcal/hr

0.0003 Kg/Kcal


6 HR non alloy steel sheet/coils 1.28 Kg/Kg content

C1745 Hermetically sealed compressors for air-conditioner using R 22 refrigerant gas of different capacities

7 EC grade aluminium ingot 1.08 Kg/Kg content

C1746 Deleted

C1747 Deleted

C1748 Deleted

1 Kg. 1 Aluminium Scrap 1.10Kg/Kg content of Aluminium in export product.

2 Aluminium Ingot. 1.07Kg/Kg content of Aluminium in export product.

C1749 Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of rectangular/Square with straight edges.

3 Aluminium Sheet/Coils. 1.05Kg/Kg content of Aluminium in export product.

In case of anodized export product the purity of inputs allowed i.e. Ingot Sheet/Coils /Circles shall be 99.7% and above.For other shapes rafer C-22

C1750 Vaporizer made of Aluminium

1 Kg. 1 Aluminium Ingot. 1.05Kg.

1 No. 1 Non-Alloy HR Plates. 1.10Kg/Kg contnet in the export product.

C1751 Tyre curing press of all sizes.

2 Components required for the export product.

Net to net basis with accountability clause.

(1) Specification/capacity & weight of capital goods along with number is to be indicated in the application. (2). Net weight of component & sub-assemblies to be imported to be procured indigeneously to be given in application. (3). Net weightof components & items to be manufactured from each raw material to be imorted is to be given in the application. (4). Weight of component & items to be manufactured from each indigenous material in export product is to be given in the application.

C341

(5). Weight of component and the item given as per notes 2 to 4 should tally with net weight of capital goods to be exported. (6). Total weight of each raw material is to be calculated on the basis of net weight given as per note 3 above plus waste as permitted in the norms for the particular raw material

1 No. 1 Manganese Dioxide (Electrolytic)

3.92gms.

2 Acetylene Black. 0.66gms

3 Zinc (Battery Grade). 5.665gms.

4 Graphite Powder 0.002gms.

5 LDPE 0.395gms.

C1752 Dry Cell R6 PVC/Paper Jacket 16.45gm/pc.

6 Tin Plate Electrolytic 0.50gms.


4.55gms.

2 Acetylene Black. 0.672gms.


4 Graphite Powder. 0.002gms.

5 LDPE. 0.233gms.

6 Tin Plate Electrolytic. For Bottom 0.5gm PMS 5.0 gms.

C1753 Dry Cell R6 Metal Jacket 18.45gm/pc.

7 Mercurry Fre Separator 18Sq.CMS.


2.60gms.




5 LDPE 0.8110gms.

6 Tin Plate Electrolytic For Top 0.875gms for Bottom 0.875gms PMS 7.053gms.

C1754 Dry Cell R14 Metal Jacket 43gm/pc.

7 Natural Manganese Ore (Powder)

4.146gms.


7.31gms.



4 Graphite Powder 0.004gms.

5 LDPE 1.26gms.

6 Tin Plate Electrolytic. For Top 1.46 gms for Bottom 1.57 gms PMS 11.62 gms.

C1755 Dry Cell R20 Metal Jacket 85gm/pc.

7 Natural Manganese Ore (Powder).

16.44gms.


7.31gms.




5 LDPE 1.26gms.

C1756 Dry Cell R20 Metal Jacket 85.59gm/pc.

6 Tin Plate Electrolytic For Top 1.46 gms

C342

For Bottom 1.57 gms PMS 11.62gms

7 Natural Manganese Ore (Powder).

16.44gms.

1 No. 1 Zinc Ingot/ Slab (Battery Grade) OR Relevant Zinc Alloy

1.035 kg/kg content in the export product. 1.03 kg/kg content in export product

2 Acetylene Black 1.02 kg/ kg content in the export product.

3 E. Manganese Dioxide 1.02 kg/ kg content in the export product.

4 Metal Top Cover 1.01 No./No.

5 Metal Bottom Cover 1.01 No./No.

6 Manganese Ore 1.02 kg/ kg content in the export product.

7 PVC Heat Shrink Tube of relevant Dia


8 Kraft Paper for Tube 1.05 kg/ kg content in the export product.

9 LDPE Granuules 1.05 kg/ kg content in the export product.

10 Polyester Labels in Rolls 1.02 Sq.Mtr./ Sq.Mtr. Content in the export product.

11 Nickel Plated Brass Caps 1.02 No./No.

12 Cartons As per packing Policy.

13 Containers As per packing Policy.

14 Misc. items: Ammonium Chloride, Rice Starch, Corn Starch Lubricant (G.K.L) Graphite Powder

CIF value limited to 2% of FOB value.

C1757 Dry Cell Batteries (Paper Polyester Jacket) Type D (R20)

15 Zinc Oxide 1.015 kg/kg content in export product

Note : If the application is for Electrolytic Tin Plate in wide Coils in place of Metal Top Cover (import item No. 4) or Metal Bottom Cover (import item No. 5) it may be allowed as 1.16 kg/kg content in export product in lieu thereof

1 No. 1 Ball Screw 3 Nos.

2 Super precision Bearing. 4 Nos.

3 SIMO Drive with Motor OR CNC System

1 Set

4 SI Top Power Supply. 1 No.

5 Smart Flux Coupling. 4 Nos.

6 Encoder 1No.

7 Switches 4Nos.

8 LM Guides. 1 No.

C1758 CNC/AMS Vertical Machining Centre with APC

9 Disc. Spring. 1 No.

Import of component shall be allowed on net to net basis with accountability clause.

C343


1 No. 1 Bearing Taper Roller TPR 32212 2 Nos.

2 Bearing Ball SR DP Groove 6206ZZ.

1 No.

3 Non-Asbestos Friction Plate 5878

1No.

4 Floating Plate. 1 No.

5 Housing. 1 No.

6 Sliding Sleeve 1No.

7 HB Plate 1No.

8 Bearing Retainer 1No.

9 Hand Lever. 1No.

10 Operating Yoke. 1No.

11 Adj. Yoke. 1No.

12 Driving Ring. 1No.

13 Toggle Lever. 4 Nos.

14 Operating Shaft. 1No.

15 Clutch Shaft. 1No.

16 Hub Retainer 1No.

17 Fitting - 60410026 1No.

18 Fitting - 60410027 1 No.

19 Lock BRG Retainer 1No.

C1760 Power Take-offs/Clutches

20 Lever Link 8 Nos.

1 MT. 1 Hot Rolled Non-Alloy Steel Strips/Wide Coils

1.30MT.

2 Cold Rolling Mill Rolls. 1.45Kg.

3 Rolling Oil 0.40Kg.

4 Pickling Oil 0.526Kg.

5 Steel Strapping As per packing policy.

C1761 CRCA Circles of Steel.

6 VCI/Rusto Paper. As per packing policy.

C1762 Agricultural Sprinklers mainly made of Brass

1 No. 1 Brass Scrap. 1.07Kg/Kg content of the Brass in the export product.

1000 Nos. (Weight -235 gms).

1 Horological Steel Strip Cold rolled

210 gms

2 Enamelled magnet copper wire 158 gms

C1763 Coils for Quarts Analogue Wrist Watch of Caliber 2030/2035.

3 Printed Circuit Board (un populated)

1000 Nos.

100 Kgs 1 Copper Wire Rod/Cathodes 97.9 Kgs. C1764 Polyamide-Imide Enamel Overcoated Enamelled Copper Wire

2 Polyamide-Imide Enamel containing Solid content of 35% to 40%.

11 kgs.

C1765 Dacrotised or other 1 Kg. 1 Cold Heading quality steel wire rod/wires/bars

1.128Kg.

C344

2 Dacromet or other similar mateials used for surface coating.

0.03225Kg. equivalent surface coated high tensile precision fastners Cold/Hot Forged Bolts/Screws All varieties.

3 Miscellaneous items: Thread Rolling Dies/Knurling Dies(Flat Cylinderical), Forming/Cutting Tools and Tools and Alloy Steel.

Upto 5% of the FOB Value.

1 Kg. 1 Cold heading quality Steel wire rod/wires/bars.

1.20Kg.

2 Dacromet or other similar materials used for surface coating.

0.02502Kg.

C1766 Dacrotised or other equivalent surface coated high tensile precision fastners Cold/Hot Forged Nuts All varieties.

3 Miscellaneous items: Taps/Tapnibs Forming/Cutting Tools and Tools and Alloy Steel.

Upto 5% of the FOB value.

C1767 Disc Springs made of Cold Rolled (Annealed/unannealed) Non Alloy/Alloy Steel.

1 Kg. 1 Relevant Grade of Cold Rolled Steel Strips/Wide Coils

1.7 kg

Ten lakhs Nos (182 kg).

1 Brass Scrap 193.5 kg C1768 Tips for ball pen Rifills

2 Stainless Steel Balls 2.04 kg (102000 Nos).

1 No. 3 Sintered Bronze Bush 1 No.

1 Motor 1 No.

C1769 Stick Mixer (with plastic body)

2 Switch 1 No.

Note: Only relevant item corresponding to the export product will be allowed for import.

C1770 Tube Forming Rolls 1 kg 1 Alloy Tool Steel Round Bar Conforming to AISI D-3/D-2 or equivalent

1.70 kg/kg weight of Steel in export product

1 No. 1 Multilip / MI/ Hat/Seal/ Road Seal

1 No.

2 Mounting Rubber 1 No.

3 Base Valve Body / Foot valve Body/ Cylinder ends

1 No.

4 Plunger Rod 1 No.

5 DU Bush 1 No.

6 Bump Stop 1 No.

7 Steel Strip 22 gms

8 Polyester Elastomer Hytrel 2 gms

9 Iron Powder 110 gms

C1771 Shock Absorber/ Strut (Hydraulic/ Gas)

10 Fluorescent Additive Oil 1.59 ml.

C1772 Earth Moving Wheel Components, namely, Bead Seat Ring, Gutter Band Fixed Flange & Lock Ring

1 No. 1 HR Section (Rolled Bar) 1.10 kg/kg content in the export product.

C1773 Earth Moving Wheel Components, namely, Detachable Flange/ Loose Flange Centre Band Disc & Side Ring

1 No. 1 HR Plate 1.20 kg/kg content in the export product

C1774 Disc Holder/ Guide made 1 kg 1 Copper Cathode and alloying 1.20 kg/kg content in

C345

of copper, nickel and tin alloy (ASTM C-97800)

elements nickel and tin the export product

C1775 Spacer Thrust made of 30%Glass filled Phenolic Moulding Powder

1 kgs 1 30% Glass Filled Phenolic Moulding Powder

1.05 kgs

700 kgs (1000 Nos.)

1 Alloy Steel Bars / Coils to Specification AISI M2

16 kgs

2 Free Cutting Steel Leaded/Non-Leaded Bars/Coils to Specification EN1A/SEA 1010/EN8M

204 kgs

3 Spring Steel / Wire in Coil 14.3 kgs

4 Alloy Steel Bars/ Coils Type 18Cr N18/SEA 3415/16Mn Cr5

105 kgs

5 Spring Dowel Pins Net to net

C1776 Injector (Nozzle holder) with Nozzle for diesel Engine

1) MISC.ITEMS Grinding Wheels/Micro Drills/ Letter / Number Inscription Punches/ Lopping compound (Paste /Powder)

Upto 3% of FOB value

1 No. 1 Valve Plate 1 Net to net

2 Spring Plates/Springs 16 (Net to net)

3 Buffer Plate/ Damping Plate/ Synchronising Plate

2 (Net to net)

4 JL. Nut (with or without washer) Hexagon Nut/ Castle Nut/ Split Pin

5 (Net to net)

5 Locating Pin/ Parallel Pin 8 (Net to net)

6 Lift Washer / Guide Ring 5 (Net to net)

7 Countersunk Bolt/ Centre Stud 1 (Net to net)

8 Seat 1 (Net to net)

9 Guard 1 (Net to net)

10 Locking Device 1 (net to net)

11 Unloader 1 (Net to net)

12 Guide Bush 2 (Net to net)

13 Actuator 1 (Net to net)

C1777 Suction Valve for Compressor

14 Washer 2 (Net to net)

1 No. 1 Valve Plate 1 (Net to net)

2 Spring Plates/Springs 12 (Net to net)

3 Buffer Plate/ Damping Plate/ Cusion Plate/ Synchronising Plate

2 Net to net

4 JL. Nut (with or without washer) Hexagon Nut/ Castle Nut/ Split Pin

2 Net to net

5 Locating Pin/ Parallel Pin 6 Net to net

6 Lift Washer/ Guide Ring 5 Net to net

7 Countersunk Bolt/ Centre Stud 1 (Net to net)

C1778 Discharge Valve for Compressor

8 Seat 1 (Net to net)

C346

9 Guard 1 (Net to net)

10 Locking Device 1 (Net to net)

11 Washer 2 (Net to net)

1 kg 1 Aluminium Extruded Tubes/ Sections of relevant Size

1 kg C1779 Wheel Chair Components made out of Aluminium Extrusions frames/ cross bar / arm rest/ leg rest

2 Aluminium Alloy Wire 0.02 kg

1 No. 1 Permanent Magnet Strontium Ferrite Grade in relevant demagnetized condition as component in relevant dimensions OR

Net to net. C1780 Magnet Retrieving

Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Raw material

1.02 kg/ kg content of Magnet in the export product.

1 No. 1 Permanent Magnet Strontium Ferrite Grade in demagnetized condition as component in relevant dimensions OR

Net to net C1781 Magnetic Tray

Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Raw material

1.02 kg/kg content of Magnet in the export product.

1 No. 1 Nickel Iron Alloy Bi-Metal Strip 1.02 kg/kg content in the export product

2 Seamless Capillary Steel Tube OD 2 mm


3 SPDT Microswitch Net to net

C1782 Bi-Metallic Dial thermometer/ Mercury in Dial thermometer

4 Mercurry 1 gm /gm content in the export product

1 No. 1 Ball Screws 2 Nos.

2 Power Operated Chuck 1 No.

3 Power chucking cylinder 1 No.

4 Stabilised Power supply 1 No.

5 Bearings with SKF or equivalent No.

Net to net

6 Couplings 2 Nos.

7 Numerical Control System 1 No.

8 Encoders 2 Nos.

9 Connector 2 Nos.

10 Push Button Actuator 13 Nos.

11 Elements 13 Nos.

12 Safety Interlock 1 No.

C1783 CNC Lathe

13 Motor Protection Starter 10 Nos.

1 No. 1 Relevant Capacitor Net to net

2 Relevant Varistor Net to net

3 Relevant Triac Net to net

4 Relevant Resistors Net to net

C1784 Pest Repellent Model POBD-1-01

5 Zinner 1 No. (Net to net)

C347

6 Light Connector 1 No. (Net to net)

7 EL Display 1 No. (Net to net)

8 Polycarbonate Compound 1.05 kg/kg content in the export product

9 Copper Wire (Super Enamelled) 0.17 kg/kg content in the export product

10 Copper Clad Laminates 1.01 kg/kg content in the export product

11 Imaging/ Photo Printing Dry Film Photo resists


12 Solder Mask Ink-cum-Catalyst/ Hardner


13 Relevant Microchip 1 No.

1 kg (content of both inputs to be declared)

1 Ferro Boron Powder 1.05 kg/kg content of Ferro Boron in the export product

C1785 Ferro Boron Cored Wire

2 CRCA Steel Strips 1.01 kg/kg content of Steel in the export product

C1786 Steel Rolls for Cold Rolling Mill (2-Hi, 4-Hi, 6-Hi)

1 kg 1 Alloy Tools Steel Round Bar conforming to AISI D3/D2

1.40 kg

1 No. 1 Lithium Bromide Net to net basis (for use as first charge)

2 BQ Plate 1.10 kg/kg content in the export product

3 Copper Tube of relevant size Net to net basis

4 Cupro-nickel tube of Relevant size

Net to net basis

5 Stainless Steel tube of relevant grade and relevant size

Net to net basis

6 Absorbent Pump Net to net basis

7 Welding consumable and cladding strip

Cif value restricted to 0.1% of FOB value

8 ICAM Systems Net to net basis

9 Refrigerant Pump Net to net basis

10 Burner 1 No.

11 Purge Pump 1 No.

12 Sight Glass Net to net.

13 Sight Glass packing Net to net.

14 Plug Net to net.


16 Relay Base Net to net.

17 Thermostate 1 No.

C1787 Absorption Chillers of Various types (weight tobe indicated)

18 Flow Switch 1 No.

1 No. 1 Copper Wire/Rod 1.01 kg/kg content in the export product

C1788 Electric Generator and sub-assemblies thereof

2 Copper Flat/Strip/Bar 1.05 kg/kg content in the export product

C348

3 Copper Plate 1.10 kg/kg content in the export product

4 CRNGO Steel Sheet for Rotor 1.30 kg/kg content in the export product

5 Insulation material (cut to length) 1.03 Sq.Mtr./Sq.Mtr. Content in the export product

6 Insulation material (in pieces) Net to net basis with accountability clause

7 Non Alloy Steel Plate of relevant grade


8 Misc. Items: Hose Pipe, Hardware, Lubrication Oil, Soldering Rod, Soldering Foils, sealant, varnish & cleaning agent, resin & Hardner

CIF value of all these items taken together restricted to 2% of the FOB value

1 Unit 1 Woven wire cloth in SS 316L 1.05 Sq.Mtr./Sq.Mtr content in the export product

C1789 Vertical and/or Horizontal Pressure Leaf Filter with Accessories

2 Linear Acting Pneumatic Piston vibrator

1 No. on net to net basis

C1790 Copper Lug (Battery cable lug)

1 No. 1 Copper Scrap 1.10 kg/kg content in the export product

100 kg toner content in toner cartridge

1 660 P Viscol 2.95 kg

2 PE 130 Wax 1.18 kg

3 Bayoxide 56.64 kg

4 PSB2700 Resin 56.05 kg

5 Bontron P51 1.18 kg

C1791 Bueno Toner cartridge for photo copier

6 Aerosil 0.45 kg

1 No. 1 Screws Net to net

2 Needle Jet 1 No.

3 Inlet Nipple 1

4 Nipple Net to net

5 Float Assembly 1

6 Jet Needle 1

7 Caps 1

8 Pilot Air Jets Net to net

9 Diaphragm Assembly 1

10 Spring Clip 1

11 Needle Assembly 1

12 Pipe Net to net

13 Plug 1

14 Pilot Jet 1

15 Clip Net to net

C1792 Carburetor Assembly

16 Rings Net to net

C349

17 Plate 1

18 Locating Pin Net to net

19 Washer Net to net

20 Adjuster 1

C1793 Aluminium Moulds for Plastic Products

1 No. 1 Aluminium Blocks 1.05 kg/kg content of export product

1 kg 1 Copper Rod/ Copper wire dia 0.1 mm and above


C1794 Enamelled copper wire with self bonding enamel of less than 0.1 mm diameter (not elsewhere specified)

2 Self Bonding enamel having solid content of 10%

CIF value restricted upto 8% of the FOB value

1 km 1 Single Mode/ Multimode Optical Fibre

4.2 km

2 UV Curable Colouring Ink 0.03 kg

3 Polybutylene Terphthalate (PBT) 4.20 kg

4 PBT Master Batch 0.11 kg

5 Thixotropic Filling compound 1.89 kg

6 Thixotropic Flooding Compound 7.57 kg

7 HDPE (for Armoured Cable) 87.33 kg

8 Steel Tape 56.45 kg

9 FRP 1.05 km

10 Water Blocking Tape 33.60 Sq.mtr.

11 Hot Foil Stamping Tape 1.05 km

12 Armid Yarn 2.6 kg

C1795 4 Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia 12.88 mm or above, 165 kg/km or above consisting of Minimum 3 PBT tubes of 2.8 mm OD or above

13 Armid Rip Cord 1.08 kg

1 km 1 Single Mode / Multimode Optical Fibre

12.6 km








9 FRP 1.05 km

10 Water Blocking Tape 33.60 Sq.mtr.



C1796 12 Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia 12.88 mm or above, 165 kg/km or above consisting of Minimum 3 PBT Tubes of 2.8 mm OD or Above


1 km 1 Single Mode / Multimode Optical Fibre

6.30 km




C1797 6 Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia 12.88 mm or above, 165 kg/km or above consisting of Minimum 3


C350




9 FRP 1.05 km

10 Water Blocking Tape 33.60 Sq.mtr



PBT Tubes of 2.8 mm OD or Above


10000 Nos. A. RAW MATERIAL FOR CD

1 Polycarbonate 173 kg

2 Aluminium Target - 20 mm x 160 mm dia OR

0.1 No.

3 Gold Target - 20 mm x 160 mm dia

0.1 No.

B. CONSUMABLES USED IN THE MANUFACTURE OF CDS

1 Stamper or Mother Master 1 No.

2 Mold Mirror 0.02 pair

3 Graphite Foil 0.1 Nos.

4 Digital Audio Tap-C60/90 6 Nos.

5 Magnetic Tape-2394 ft. 6 Nos.

6 Recording Head 0.25 Nos.

7 Silver Nitrate 0.2 kg

8 Nitto Tape 1 meter

9 Hand Gloves 4 Pairs

10 Laser Beam Head 0.008 Nos.

11 Filters 0.01 Nos.

C. PRINTING RAW MATERIALS:

1 Printing Ink 1.6 kg

2 Laquer 1 kg

3 Process Base 2 Litre

4 Metallic Clear 2 Litre

5 Polyglaze White Ink 0.014 litre

6 Image Ink 0.01 litre

7 Master Colour for fancy CD & Playstation

1 kg

8 Mixing Clear (Paint) 2 litre

9 Screen/ Component for Screen making

40 Nos.

10 Screen Mesh 0.00128 Sq.meter

11 Mask 0.333 kg

12 Screen coating solution 0.02 kg

C1798 (1) Compact Disk - Audio (2) Compact Disk - Vedio (3) Compact Disk - ROM

13 Screen Adhesive 0.02 kg

C351

14 Screen Stiffner 16 Nos.

15 Screen Stickers 16 Nos.

16 Squeegee 40 Nos.

17 Tray Velvet Sheet 10 Nos.

18 Graphic Art Film 8 Nos.

19 UV Lamp 0.1 Nos.

20 Bulbs for computerized camera like Papageno Bulb

0.1 Nos.

D. CLEANING AND POLISHING MATERIALS:

1 Linti Free Paper 200 Nos.

2 Tissue Paper 200 Nos.

3 Stamper Polishing Sheet 2 Nos.

4 Mirror Cleaning Solution 0.02 Litre

5 Anti Rust Solution 0.4 Litre

E.STAMPER CLEANING AND POLISHING MATERIAL:

1 Isoproply Alcohol 4 Litre

2 Acetone 2 Litre

3 Univitol 4 Litre

4 Disodium Benzene 0.2 kg

5 Paladium Chloride 0.2 kg

6 Nickel Sulphamate Solution 2 kg

7 Nickel-Chloride Hexahydrate 0.02 kg

8 Nicket Carbonate 0.2 kg

F. PACKING MATERIAL:

1 Jewel Box Digi pack/ CD Envelop OR

Net to net

1) Polystyrene/ P.P. Moulding Powder


2 Tray OR

Net to net

2 Polystyrene/ Moulding Powder 1.05 kg/kg content in the export product

3 Inlay Card OR

Net to net

3 Relevant Paper / Board 1.05 kg/kg

4 Self Sealing Pouch Net to net

5 BOPP Tape 2000 Meter

6 Tear Tape 4000 Meter

7 Adhesive Tape 10 Rolls

8 Splicing Tape 1 Meter

C1799 Filter Cartridge: Cylindrical Air Intake Filter/ Pulse Jet Air Filter/ Conical Filter Cartridge/ Cylindrical

1 Number 1 Relevant Filter paper 1.02 kg/kg content in the export product

C352

Filter Cartridge

1 Number 1 Relevant Module Sub-Assembly Net to net C1800 Non-Aerosol Spray Pump/ dispensers 2 Relevant Actuator Assembly Net to net

Note: The import of components shall be permitted on net to net basis with accountability clause and the type , technical specifications (including part No. if any) etc. of the components sought for import should confirm to those utilise in the manufaturer of the resultant product.

1 kg 1 Nickel Cathodes and / or Nickel Pellets - containing approximate 99.9% (min) Nickel contents


C1801 Dumet wire ( Copper tube filled with Alloy Steel and Nickel)

2 High Conductivity Copper Tube containing approximate 99.9% (min.) Copper contents


1 Million Number

1 Stainless Steel Wire dia 2.3 mm of relevant grade


2 Tungsten Carbide Balls 1.02 Millions

C1802 Stainless Steel Ballpen Tips

3 Cutting Oil, Cleaning Oil- Trichloroethylene, Cutting Tools

4% of FOB value

1 kg 1 Sulphur Granules S:99% Min. Size : 0 to 2 mm

1.015 kg/kg of Sulphur Granule content in export product

C1803 Sulphur Cored Wire

2 CRCA Steel Strips Grade: EDD Width 58 mm

1.010 kg/kg of CRCA content in export product

1 Number 1 Cold Rold Aluminium Sheet in Coil & Non Coil Form


2 Pallodium Oxide Anhydrous Net to net

3 Molecular Sleve Net to net

4 Non Woven Cryogenic Insulation Fabric


5 Aluminium Foil 1.02 kg/kg content in export product

6 Adhesive - Crest 5% of FOB

7 Adhesive - Ciba

8 Consumable (Welding Wire, Welding Flux & Welding Rods)

C1804 Cryocontainer/ Cryoseal Container/ Liquid Nitrogen Container/A.I Equipment/ Cryogenic Container Cryoseal Liquid Nitrogen Container made of Aluminium

9 FRP Neck Tubes Net to net

C1805 High Speed Steel (Cobalt Grade ) End Mills Dia 1 mm to 20 mm

1 kg 1 High Speed Steel ( Cobalt Grade) in the form of Coils/ Bars/Rods of Diameter 7 mm to 23 mm

1.50 kg

C1806 Electrolytic Tinplate Waste/waste printed /lacquered unprinted sheets cut to size for making components of round tin cans other than OTS cans

1 kg 1 Unprinted /Unlaquered Electrolytic Tinplate Waste/Waste Coil/Sheet

1 kg

1000 Numbers

1 90% Krypton Gas Bal Nitrogen 116 Litres at 1 Bar or 0.58 Litre at 200 Bar

2 Glass Shells/ Glass Envelopes 1100 No.

3 Brass Caps 1010 Numbers

C1807 Long Life Lamps ( 0-150 watts) life 16,000 hours to 20,000 hours)

4 B 701 Halogen Tungsten Wire ( 910 Mtrs

C353

upto 30 mg)

5 Lead in wire (Ballotiny filled) 1010 Numbers

6 Getter (P3L5) 0.045 Litres

7 K 18 Lamp Copping Cement 1.55 kg

8 Getter (ALZR) 0.030 Litres

9 Marking Ink 8.750 Grams

C1808 Dish Ends (Ellipsoidal or Circular Shape) made of Non-Alloy Steel Plates

1 kg 1 Non-Alloy Steel Plates SA 516/515

1.1 kg/kg content of Steel Plate in the export product

1 MT 1 Zinc Ingot OR Relevant Zinc Alloy

1.12 kg/kg content of Zinc in export product 1.10 kg/kg content in export product

2 Cylinders with or without key (s) Net to net

3 Plastic Chips for plastic component such as washers key holders etc. Polyamite 66/ Nylon 66/ Polyamide 6/ Nylon 6/ Polyacetal/ Delrin/ Polyoxymethylene


4 Machine Screws Net to net

5 (a)Berlaclear CT Laquer OR Albrilac HB (for Electrophoretic Lacquer)/ Polyester Powder for coating (b) Solvent for Electrophoretic Lacquer (c) Rinse additive for Electrophoretic Lacquer

CIF value limited to 4% of FOB of export.

6 Abrasive Belt 50 mm X 3500 mm for grinding

7 Abrasive Belt 150 mm X 2000 mm for grinding

8 Liquid polishing compound for polishing Rough Finish

9 Trichloro Ethylene for degreasing

10 Bar Polishing compound Final Finish (Pre-polishing compound, polishing compound Finshing compound)

11 Polishing Buffs (Pre polishing Buffs, Polishing Buffs, Finishing Buffs)

C1809 Zinc Builders Hardware Lacquered/ Powder Coated (T/C Pressure Die Cast & Zinc Alloy conforming to Z-3/Z-5 specification)

12 Plastic Vibratory Media

Note: 1. CIF value for import item Nos. 6 to 12 shall be limited to 4% of FOB value of export.

1 No. (7.75 gms.)

1 Cold Rolled Bright Finish Surgical Stainless Steel Strips

1.687 gms.

2 Polypropylene/ High Impact Polystyrene (HIPS)/ Acrylonitril Butadiene Styrene (ABS)

7.35 gms.

C1810 Scalpel (Surgical Blade with Plastic handle & cover)

3 Medical Paper As per packing Policy.

C1811 Harrow Disc Notched 1 kg 1 Alloy/ Non Alloy Steel Billets 1.45 kg

C354

C1812 Lacquered Tin Free Steel Sheet

1 kg 1 Tin Free Steel Sheet (Unlacquered)

0.994 kg

C1813 S.S. Perforated Apron for Tea Industry

1 kg 1 C.R. Stainless Steel Sheets/ Wide Coils (AISI 304)

1.10 kg

C1814 Embossed Sheets of Cold Rolled Non-Alloy Steel

1 kg 1 C.R. Non Alloy Steel Sheets/ Wide Coil Bright finish of relevant grade

1.02 kg

1 kg 1 Low Ash Metallurgical Coke 260 gms. (Inclusive of 5% wastage)

2 Amorphous Graphite 395 gms. (Inclusive of 5% wastage).

3 Pure White Paraffin Wax (Melting point 60-63 Degree C)

105 gms. (Inclusive of 5% wastage).

4 Coal Tar Pitch (V.M. 50%) 400 gms. (Inclusive of 50% wastage).

C1815 Wax Impregnated Carbon Electrodes for Dry Cell Battery

5 Natural Crystalline Graphite 85 gms. (Inclusive of 5% wastage).

1 kg 1 Lead Ingots 1.02 kg/ kg content in export product.

C1816 Lead Cored Wire from Lead Ingots

2 CRCA Steel Strip 1.01 kg/ kg content in the export product.

C1817 Aluminium Steam Sterilizer - Double Racks (pressure cooker type)

1 No. 1 Aluminium Circles, Commercial Grade


1 kg 1 Copper Wire Rod/ Cathode 1.01 kg/ kg content in the export product.

C1818 Polyesterimide Enameled copper wire/ strip

2 Polyesterimide Enamels 1.01 kg/ kg content in the export product.

C1819 CNC Bushing C-1-1/2 Type

1 No. 1 Alloy Steel Round/ Bars 2 kg/ kg content in the export product.

C1820 Tapping Chucks WF 1 IKP

1 No. 1 Alloy Steel Round/ Bars 2.82 kg/ kg content in the export product.

C1821 Adapter Housing WEN 120 B.60

1 No. 1 Alloy Steel Round/ Bars 3.06 kg/ kg content in the export product.

1 No. 1 Reversing Transmission 1 No.

2 Control Valve (Hydraulic Valve) 1 No.

3 T.R. Bearing 1 No.

4 Digital Hourmeter 1 No.

5 Front Drive Rigid Axle 1 No.

C1822 Two Cubic Meter Standard bucket Wheel loader

6 Rear Drive Rigid Axle 1 No.

1 No. 1 Control Valve 1 No.

2 Swing Bearing 1 No.

3 Pilot Valve 3 Nos.

4 FC Valve 1 No.

5 Seal Group 2 Nos.

6 Pump 1 No.

7 TR Chain 2 Nos.

8 Other Relevant Component As per GN4.

C1823 Hydraulic Excavator

9 Liquid adhesive The quantity of import item No. 9 to

C355

11 may be allowed within 1% of FOB value.

10 Calking

11 Sealant

12 Welding Wire 2% of the weight of Steel to be welded.

13 Steel Tube 1 Mtr./Mtr. content in export product.

14 CDS Tube 1 Mtr./Mtr. content in export product.

15 Hose 1 Mtr./Mtr. content in export product.

16 Steel Plate of relevant grade 1.1 kg/kg content in export product.

Note: 1. The quantity of import item Nos. 9 to 11 may be allowed within 1% of FOB value.

1 kg 1 Lead Ingots 1.02 kg/kg content in export product

C1824 Lead Cored Wire

2 CRCA Steel Strips 1.01 kg/kg content in export product

1 No. ( 34.4 MT)

1 Non Alloy Steel Plates 1.20 kg/kg content in export product

2 Relevant Steel Forgings/ Components Flanges, Rings, Segmental Rings, Bars

Net to net

3 Stainless Steel Sheets/ Plates 1.05 kg/kg content in export product

4 Relevant Castings Net to net

5 Relevant Studs/Nuts/Bolts/Screws /Pins/ Dowels Adapters/Connectors/Washer Springs

Net to net

6 Gaskets Net to net

7 Wire Inserts Net to net

8 Insulation Material 1.02 Sq.Mtr./Sq.Mtr. Content in the export product

9 Insulation Paper 1.02 Sq.Mtr./Sq.Mtr. Content in the export product

10 Welding Electrodes/ Wires (In Straight Lengths/Coils/Spools)

2% of net weight of Steel to be welded

C1825 Frame Assembly (Exhaust frame for Steam Turbine Generator)

11 Welding Flux 0.5% of net weight of Steel to be welded

C1826 LPG Storage Bullets/ Tanks

1 No. 1 B.Q. Plates 1.05 kg/ kg content in export product.

1 No. 1 CRCA Non Alloy Steel Sheet 1.10 kg/kg content in the export product.

2 Nickel Anode 0.97% of the weight of components to be nickel plated.

C1827 Kerosene Wick Stove and its parts

3 Paper Board for corrugated boxes As per packing Policy.

C1828 Radiators for 1 No. 1 Stainless Steel Sheet/ Coils 1.05 kg/ kg content in

C356

the export product.

2 Welding Wires / Rods, Seam Welding Electrodes / Wheels

1% of weight of Steel to be welded

transformer made of stainless steel

3 Absorb Bag Net to net as per packing policy

Note: In the case of coated/ painted radiator, whether internally or externally coated, relevant coating/ painting material may be allowed on actual requirment basis upto 4% of the FOB value of exports.

1 No. 1 ABS/HIPS 1.05 kg/ kg content in the export product.

2 PVC Compound 1.05 kg/ kg content in the export product.

3 Nitrile Rubber compound 1.05 kg/ kg content in the export product.

4 Relevant Gear Motor/ Swing Motor

1 No.

5 Relevant Main Motor 1 No.

6 Relevant Pump Motor Net to net.

7 Expanded Polystyrene 1.05 kg/kg content in the export product

8 Cellulose impregnated corrugated paper cartons

1 kg/ kg content in the export product.

9 Polypropylene 1.05 kg/ kg content in the export product.

10 Relevant Capacitor 1 No.

11 Relevant Switches 2 Nos.

12 Kraft Paper As per packing policy.

13 Kraft Paper/EPS 1.05 kgs/kg content in the export product

14 HIPS 1.05 kgs/kg content in the export product

C1829 Aircooler with/without Trolley

15 Polycarbonate 1.05 kgs/kg content in the export product

C1830 Hot Rolled Non-alloy Steel Strips/ Slit Coils in pickled and oiled condition

1 kg 1 Hot Rolled Non-alloy Steel Wide Coils in un-pickled and un-oiled condition

1.02 kg

C1831 Aluminium Pressure Cooker

1 No. 1 Aluminium Alloy Circles (commercial grade)


1 No. 1 HR Sheet/Wide Coil for RIM 1.19 kg/ kg in the export product.

2 Billets for shell 2.5 kg/ kg in the export product.

3 Wire for spokes 1.07 kg/ kg in the export product.

4 Nipple Wire 1.42 kg/ kg in the export product.

5 Nickel 0.30 kg/per No. of the export product.

6 Sealant 0.30 kg/per No. of the export product.

7 Brightener 0.15 kg/ No. of export product.

C1832 Chrome/ Nickle Plated Wire Wheel for all types of cars

8 Plating Chemicals CIF value limited

C357

upto 3% of the FOB value.

C1833 Deleted

C1834 Telephone Cable of relevant size (pairs) having copper conductor - 0.5mm dia

1 km As per Engineering Table No. 9(1)


1 Km As per Engineering Table No. 9(2)


1 Km As per Engineering Table No. 9(3)

1 No. 1 Relevant Cold Rolled Steel Sheet/ Strip/ Wide Coil


2 CRNGO Steel Sheet/ Strip/ Wide Coil


3 Trivolthrem/ Triflixel (Nomex/ Polyester Film/ Nomex)

1 kg/ kg content in the export product.

4 Copper Wire (Square) Bar/ Rod 1.05 kg/ kg content in the export product.

5 M.S. Plate 1.05 kg/ kg content in the export product.

6 Forging Net to net.

7 Brass Brush Holder Net to net.

8 Nomex Aramid Paper Net to net.

9 Bearings of relevant Type Net to net.

10 Resigiss Banding Tape Net to net.

C1837 D.C. Motors

11 Name Plates Net to net.

1 No. 1 Aluminium Alloy Ingot 1.12 kg/ kg content of Aluminium Alloy in export product.

2 Circlip Net to net.

3 Seal Net to net.

4 'O' Ring Net to net.

5 Plug Protective Net to net.

6 Plug Protective Net to net.

7 Plunger Primary Net to net.

8 Seal Net to net.

9 Pin Net to net.

10 Poppet Net to net.

11 Seal Net to net.

12 Secondary Plunger Net to net.

13 Sleeve Net to net.

14 Spring Net to net.

C1838 Master Cylinder Assy.

15 Seal Net to net.

C358

16 Spring Net to net.

17 Retainer Net to net.

1 kg 1 Carbon Steel/ Mild Steel/ all seconds grades/ deffectives/ cuttings/ prime sheets/ coils/ strips OR


1 Tin Plate waste/ waste 1.25 kg/ kg content in the export product.

2 Bronze Powder 0.070 kg/ kg of export product.

C1839 Steel Trunks (in CKD and SKD condition), with accessories/ fittings/ hardwares, such as, hasps, staples, corners, handles, slips, knobs fittings side flaps and flats

3 Suitcase locks, metal fittings including combination locks

Net to net with accountability in the export product.

C1840 Marsh Geophone Strings consisting of 12 SM-24 Basic Elements

1 No. 1 Basic Element SM-24 12 Nos.

C1841 Marsh Geophone Strings consisting of 12 SM-4 Basic Elements (LD)

1 No. 1 Basic Element SM-4 12 Nos.

1 kg 1 Non-Alloy Steel Rounds/ Bars/ Wire Rods


C1842 Copper Bonded/ Coated Ground Steel Rods

2 Copper Wire Bars/ Cathodes/ Rods


1 No. 1 Brass Strip BS2870 1.10 kg/ kg content in the export product.

2 Copper Strip BS4608 1.10 kg/ kg content in the export product.

3 Silver Plated Copper Strip 1.02 kg/ kg content in the export product.

C1843 HRC Fuses

4 Fire Sheet/ Disc Board 1.10 kg/ kg content in the export product.

1 kg 1 S.S. Sheets/ Wide Coil of relevant Grade


C1844 Chafing Dishes/ Chafers (Round Shaped)

2 Brass Scrap 1.06 kg/ kg content in the export product.

1 kg 1 S.S. Sheets/ Wide Coil of relevant Grade


C1845 Chafing Dishes/ Chafers (Rectangular Shaped)


1 No. 1 S.S. Sheets of relevant Grade 1.36 kg/ kg content in the export product.


C1846 Waste Coupling for Sink

3 P.P. Moulding Powder/ Granules 1.05 kg/ kg content in the export product.

1 No. 1 S.S. Wide Coil of relevant Grade 1.36 kg/ kg content in the export product.

2 Getter Pills 1 No.

3 Buffing Wheel As per consumable Policy.

C1847 S.S. Vaccum Jugs (without Handle & Lid) for Coffee/ Tea machines

4 Kraft Paper As per packing material Policy.

C1848 Injection Mould with Hot 1 Set 1 Relevant Alloy Steel Flat/ Round/ Block


C359

2 Hot Nozzle Flat Net to net (set) Runner System and Temperature Controller 3 Temperature Control System Net to net (set)

1 No. 1 Relevant Motovib (Vibration Motor)

Net to net.

2 Relevant Variable Frequency Drive

Net to net.

3 Relevant Energy Regulator Net to net.

4 Relevant UV Lamp Net to net.

5 Relevant UV Choke Net to net.

6 Relevant Noise Filter Net to net.

7 Relevant Gas Filled Lifting Cylinder

Net to net.

8 Polyurethane Elastomer 1.05 kg/ kg content in the export product.

C1849 Vibratory Cutlery Polisher

9 Relevant Air Heater Net to net.

C1850 Synthetic Media Pocket 1 No. 1 Synthetic Non-Woven Filter Media of relevant efficiency and GSM

1.04 Sq.Mtr./ Sq.Mtr. Content in the export product.

C1851 Electrical Terminals (Rail Mounted)

1 No. 1 Relevant Polymide Powder 1.05 kg/ kg content in the export product.

C1852 Stainless Steel Inner/ Outer Ring for Gasket

1 kg 1 Stainless Steel Sheet/ Wide Coil/ Strips of relevant grades


C1853 Tube-cut-of-Blades (knives) made of High Speed Steel Sheet

1 kg 1 High Speed Steel Sheet of relevant grade


1 No. 1 A.C. Motors Net to net.

2 Gear Box Net to net.

3 Speed Controller Net to net.

4 Float Switch Net to net.

5 Ball Bearing Net to net.

6 Spiral Brushes Net to net.

7 Submersible Pump Net to net.

8 Blower Motor Net to net.

9 Photoelectric Switch Net to net.

10 Centrifugal Magnetic Pump Net to net.

11 Temperature Controller Net to net.

12 Visual Programmable Logic Controller

Net to net.

13 Bellows Pump Net to net.

14 Magnetic Switch Net to net.

15 Noise Filter Net to net.

16 Solenoid Valve Net to net.

17 Heater for Dryer Net to net.

18 Cartridge Heater Net to net.


20 Socket Net to net.

C1854 Plate Processor for offset printing industry

21 Main Switch Net to net.

C360

22 Thermocouple & Mounting Screws

Net to net.

23 Rollers Net to net.

24 Cable Net to net.

25 PUC Ball Valves Net to net.

26 Relevant Stainless Steel Sheet 1.05 kg/ kg content in the export product.

C1855 Telephone Cable of relevant size (pairs) having copper conductor 0.398/ 0.4mm dia

1 Km As per Engineering Table No.9(4)

C1856 Telephone Cable of relevant size (pairs) having copper conductor 0.89/ 0.90mm dia

1 Km As per Engineering Table No.9(5)

C1857 Copper Sleeves (of High Conductivity 99.99% Pure Copper) as a component of Copper-T

1 Kg 1 Seamless Oxygen Free Copper Tube (of High Conductivity 99.99% Pure Copper)

1.05 kg

1 kg 1 Ferro-Molybdenum Granule/ Powder

1.015 kg/ kg content in export product.

C1858 Ferro-Molybdenum Cored Wire

2 CRCA Steel Strip 1.01 kg/ kg content inexport product.

C1859 Aluminium Redrawn Alloy Tube/ Pipes

1 kg 1 Aluminium Extruded Hollow Alloy Tubes/ Pipes

1.02 kg

1 kg 1 HR Non-Alloy Steel Sheet/ Wide Coil

0.945 kg

2 Polyurethane Epoxy Paint Upto 4% of FOB value of export

C1860 Transformer MS Tank/ Clamps

3 Zinc Rich Epoxy Primer

1 kg 1 Relevant Cold Rolled (including CRCA/ CRCA - Skin Passed/ Temper Passed) Non-alloy Steel Strips/ Wide Coils

1.16 kg

2 VCI/ Rusto Paper As per Packing Policy.

C1861 Circles (Circular Blank/ Disc) made of CR Non-Alloy Steel Sheets/ Strips/ Wide Coils

3 Steel Strapping As per Packing Policy.

1 kg 1 Brass Sheet 1.05 kg/ kg content in the export product.

2 Brass Pipe 1.01 kg/ kg content in the export product.

C1862 Automobile Radiator Parts made of Brass

3 Brass Rod 1.05 kg/ kg content in the export product.

1 kg 1 Graphite Powder/ Granules 1.015 kg/kg content of powder/ granules in the export product.

C1863 Graphite Cored Wire

2 CRCA Steel Strips 1.01 kg/kg content of CRCA Steel in the export product.

1 No. 1 Relevant CRCA Steel Sheets/ Wide Coils/ Strips


C1864 Automotive Head Lamps, Auxiliary Lamps, Work Lamps, Rubber Body 2 Halogen/ Automotive Lamps

(Bulbs) Net to net.

C361

3 Head Lamp Glass Lenses Net to net.

4 Bonding Adhesive/ Lacquer Thinner/ Epoxy Powder

4% of FOB value of exports.

5 Relevant Synthetic Rubber 1.10 kg/kg content in the export product.

Lamps for Motor Vehicles (with or without bulbs)

6 Relevant Plastic Powder/ Granules


C1865 Kapton 0.025mm x 20mm width x 500 Meters length per Roll (Polyamide film in cut length)

1 Roll 1 Kaneka PI Film "APICAL" Film 25 AH 1030mm wideth x 0.025mm Thickness (Polyamide film in running length)


1 Sq. Meter 1 Rhodorsil Resin 4085 55 +/- 5% Solid content

0.05 kg/ Sq.Mtr. Content in the export product.

2 Phlogophite Mica 0.2125 kg/ Sq.Mtr. Content in the export product.

3 Hiblon Film HH 25 0.028 kg/ Sq.Mtr. Content in the export product.

C1866 Coblosam 315.64-05 containing: 1. Rhodorsil Resin 4085-0.027 kg/ Sq.Mtr. 2. Phlogophite Mica - 0.17 kg/ Sq.Mtr. 3. Hiblon Film HH 25-0-028 kg/ Sq.Mre. 4. Siccatif 9602-0.000093 kg/ Sq.Mtr.

4 Siccatif 9602 0.000093 kg/ Sq.Mtr. Content in the export product.

1 Sq. Meter 1 Rhodorsil Resin 4085 55 +/- 5% Solid content

0.05 kg/ Sq.Mtr. Content in the export product.

2 Phlogophite Mica 0.1575 kg/ Sq.Mtr. Content in the export product.

3 Hiblon Film HH 25 0.028 kg/ Sq.Mtr. Content in the export product.

C1867 Coblosam 315.64-04 containing: 1. Rhodorsil Resin 4085-0.027 kg/ Sq.Mtr. 2. Phlogophite Mica - 0.126 kg/ Sq.Mtr. 3. Hiblon Film HH 25-0-028 kg/ Sq.Mre. 4. Siccatif 9602-0.000093 kg/ Sq.Mtr.

4 Siccatif 9602 0.000093 kg/ Sq.Mtr. Content in the export product.

1 No. 1 Polypropylene Granules 1.05 kg/kg content in export product.

2 Heating Element 1 No.

3 Polyol Resin 0.408 kg/ kg of PU Foam contained in the export product.

4 Isocyanate Hardner 0.612 kg/ kg of PU Foam contained in the export product.

5 Thermostate 1 No.

6 Safety Valve 1 No.

7 M.S. Sheet/ Wide Coil/ Strips of relevant grade


8 Nut & Bolt Net to net.

9 Copper Sheet 1.02 kg/kg content in the export prouct.

C1868 Electric Storage Water Heater

10 S.S. Sheet/ Wide Coil/ Strips of relevant grade

1.18 kg/kg content in the export prouct.

C1869 Auto Control Cable for 1 kg 1 Galvanised Steel Wire of relevant dia


C362

2 Zinc Alloy Ingot (Z-5) 1.05 kg/kg content in the export product.

seat applications

3 HDPE/ PP Granules 1 kg/kg content in the export product.

C1870 Auto Control Cable ASM Hood Cable

1 kg 1 Galvanised Steel wire of relevant dia


C1871 Deleted

C1872 Empty Recessed Fluorescent fitting complete with Aluminium Louver

1 No. 1 Relevant Aluminium Sheet 1.02 kg/kg content in the export product.

1 No. Raw Materials:

1 CRNGO Steel Sheet/ Strip/ Wide Coil


2 Copper Wire Rods 1 kg/kg content in the export product.

3 Nylon 1 kg/kg content in the export product.

4 Araldite 1% of FOB value of export.

Components:

1 Commutator 1 No.

2 Switch 1 No.

3 Gear & Pinion 1 No.

4 Bearings Net to net.

5 Cable 1 No.

6 Chuck & Key 1 No.

7 Brush Holder 2 No.

8 Brush Spring 2 No.

9 Fixed Ratchet 1 No.

10 Moving Ratchet 1 No.

11 Inner Clamp Washer 1 No.

C1873 Portable Electro Mechanical Power Tools

12 Outer Clamp Washer 1 No.

Note : Components are to be accounted for in the export products.

1 No. 1 Relevant Engine - 3 to 6 Cylinder Net to net.

2 Forks 800mm to 2500mm (relevant)

Net to net.

3 Torque Converter Net to net.

4 Hydraulic valve 2/3/4 Spool Valve

Net to net.

5 Relevant 1 Beam 4" to 6" (2300mm to 2800mm)

Net to net.

6 C Channel 4" to 6" (2300mm to 2800mm)

Net to net.

7 Selector disc (Inner + Outer) Net to net.

8 Bumper Bar/ Carriage Section Net to net.

9 Brake Assembly Net to net.

C1874 Diesel Fork Lift 1.5 Ton to 10 Ton

10 Lift Cylinders Net to net.

C363

11 Tilt Cylinders Net to net.

12 Steering Cylinder Net to net.

13 Steering Unit Net to net.

14 Tyres - 6*10 to 9*20 Net to net.

15 Wheel Rims 6*10 to 9*20 Net to net.

16 Seat Net to net.

17 Bearing (Roller/ Taper) Net to net.

18 Battery 12 V BOAH to 12V 120 AH

Net to net.

19 Drive Axle Net to net.

20 Transmission Pump Net to net.

21 Hydraulic Pump Net to net.

22 M.S. Sheets/ Wide Coils/ Plates 1.05 kg/kg content in the export product.

C1875 Cast Article made of Zinc Alloy

1 kg 1 Relevant Zinc Alloy Ingot 1.06 kg/kg

C1876 Roto Glydring made of Glass filled PTFE Tube

1 Foot 1 Cluster of PTFE with glass filled tube

1.6 Feet

1 No. 1 ABS 1.05 kg/kg content in the export product.

2 Polypropylene 1.05 kg/kg content in the export product.

3 Polycarbonate 1.05 kg/kg content in the export product.

4 Motor Net to net.

5 Switches Net to net.

6 PP Spun Bag Net to net.

7 Main Cord Net to net.

8 Filter Motor protect Net to net.


C1877 Vacuum Cleaner

10 Packing material As per packing policy.

C1878 Automotive Wheel (Diameters from 12"-17") without tyres

1 No. 1 HR Sheet/ Wide Coil of relevant Grade of Steel

1.18 kg/kg content of HR Sheet/wide coil of relevant grade of steel in the export prodcut.

C1879 Deleted

1 No. 1 Brass Scrap 1.075 kg/kg content in the export product.

2 Synthetic Rubber 1.10 kg/kg content in the export product.

3 Non Alloy Steel Wide Coils/ Steels


4 Polypropylene - Plastic Resin 1.05 kg/kg content in the export product.

5 Fiber Glass 1.05 kg/kg content in the export product.

C1880 Welding accessories, such as, Electrode holder, chipping hammer, cable connector, earth clamp, ground clamp, cable ring, splicer hammer

6 Nylon Resin 1.05 kg/kg content in the export product.

C364

Note: Description of the specific welding accessory shall be indicated by the exporter in the application.

1 No. 1 Relevant Ink 1.17 ML per ML Ink content in the export product.

2 Cleaning Solution 60 ML

3 Unused Empty inject Electronic Cartridge

Net to net.

4 Lid 1 Unit

C1881 1 Inkjet Cartridges

5 Blue Tape 114 mm


2 Asbestos raw in different grades/ Asbestos Yarn OR

0.60 kg

Asbestos Yarn with Metallic Insertion

0.70 kg


Not exceeding 5% of the FOB value of export.

C1882 Asbestos Moulded Metallic Brake Lining




2 Asbestos raw in different grades/ Asbestos Yarn OR

0.60 kg

Asbestos Yarn with Metallic Insertion

0.70 kg



C1883 Asbestos Moulded Metallic Clutch Facing



1 kg 1 Alloy/Non Alloy Steel Bilets/ Rounds of relevant grade

1.25 kg

2 Thread Protectors Net to net.

C1884 Seamless Steel Casing and Tubing

3 Thread Inserts/ Cut-Off Blades Upto 2% of FOB

1 No. (Export weight to be indicated)

1 Stainless Steel Sheet/ Wide Coil of relevant grade


2 Galvanised Plain Steel Sheet/ Wide Coil


3 Copper Tube of relevant dimension


4 Aluminium Sheet 1.02 kg/kg content in the export product.

C1885 Water Cooler

5 Isocyanate 0.525 kg/kg content

C365

in the export product.


7 Hermetically Sealed Compressor Net to net.

1 MT 1 Special Gelatine Based Water Resistant Slurry Explosive

0.0905 kg

2 Amonium Nitrate Based Water Resistant Slurry explosive

4.5255 kg

3 Other Explosive 1.9395 kg

4 Water Resistant Detonating Fuse and Cord Relays

1.3964 Mtr.

5 Electric Detonators 1.1637 No.

6 Non-Electric Detonators 0.181 No.

7 Drill Rods 0.0776 No.

8 Drill Accessories 0.0336 No.

9 Assortment of Consumables 1 Lot

10 Copper Sulphate 3.879 kg

11 Zinc Sulphate 3.879 kg

12 Sodium Cyanide 0.4008 kg

13 Xanthates 0.4526 kg

14 MIBC 0.931 kg

15 High Chrome Grinding Media 6.9176 kg

C1886 Zinc Concentrates

16 Hydrated Lime (Chemical Grade)

1.384 kg

1kg 1 CRCA Strips 1.07 kg/kg content in the export product.

C1887 Single/Double Walled Steel Tubes (Copper Coated) 2 Copper Anodes (Electrolytic

Grade) 1.07 kg/kg content in the export product.

1.0 Million Numbers (176.4 kg)

1 Nickel Silver Wire Dia 2.3 mm of relevant grade


C1888 Ball Pen Tips of Nickel Silver Wire

2 Tungsten Carbide Balls 1.02 million Nos.

C1889 Carbon Electrode 1 kg 1 Copper Cathode 1.07 kg/kg content in the export product.

1 kg 1 Copper Cathode/ Copper Wire Bar / Cast Copper Rod OR

1.05 kg C1890 Copper Bus Bars


1No. 1 Aluminium Tube 1.02 kg/kg content in the export product.

2 Aluminium Foil 1.02 kg/kg content in the export product.

3 Aluminium Sheet/ Strips 1.03 kg/kg content in the export product.

4 Brazing Flux Up to 5% of FOB value

C1891 Radiator made of Aluminium with Plastic Tank

5 Relevant Plastic Tanks OR Relevant Plastic Granule

Net to net 1.05 kg/kg content in tank

C1892 Welded Steel Link Chain 1 MT 1 Copper Electrode 2 kg

C366

2 Bandshaw Blade 2 Mtr.

1 kg 1 Silicon Bonded Micanite/ Heater Plate - Electrical insulating material


2 Heating Tape/ Wire- Generate Heat by current


3 Aluminized Steel Sheet - resistance to corrosion under high heat


C1893 Mica Heating Element (electrical heating element)

4 Receptacle/ Terminal connection between cable and end point

Net to net.

1 No. A. Assembly/ Sub-Assembly/ Components:

1 Air Compressor Net to net.

2 Air/Fuel/ Oil Filter Net to net.

3 Automotive Battery Net to net.

4 Bearing (All types other than Engine Bearings) such as ball bearings and Taper/ Cylindrical/ Needle Roller Bearings

Net to net.

5 Brake Assembly (Primary/ Secondary) or components thereof

Net to net.

6 Cab Assembly or components thereof

Net to net.

7 Clutch Assembly (including Split/ Torgue Type) or components thereof

Net to net.

8 Coupler Net to net.

9 Electical Equipment such as Alternator, Starter Motor, Dynamo, Regulator, Horns and Circuit Breakers

Net to net.

10 Electrical Switches/ Auto Lamps Net to net.

11 IC Engine (Complete) or components thereof

Net to net.

12 V Belt and Pulley Net to net.

13 Fuel Tank Net to net.

14 Front Axle Support Net to net.

15 Front Axle (2 Wheel Drive/ 4 Wheel Drive) including Sleeves, Spline shaft

Net to net.

16 Hydraulic Pump (including Auxiliary Hydraulic Pump)

Net to net.

17 Hoses Net to net.

18 Hydraulic Cylinder/ Hydraulic Valves

Net to net.

19 Hardware items such as Nuts, Bolts, Pins, Washers, Spacers, Shims, Drain Plugs

Net to net.

20 Hood/ Bonnet Net to net.

21 Instrument Cluster Net to net.

22 Oil Seals/ O-Rings Net to net.

C1894 Agricultural Tractor

23 Oil Pump Net to net.

C367

24 Power Stearing Unit or components thereof

Net to net.

25 Power Lift Complete Net to net.

26 Radiator Net to net.

27 Safety Equipment: a) Mechanical (Rops, Safety Belt) b) Electrical (Safety Neutral Switches Safety Belt Indicator Switches)

Net to net.

28 Seat Assembly Net to net.

29 Silencer Net to net.

30 Tyre/ Tubes Net to net.

31 Wheel Rims Net to net.

32 Transmission complete (consstant mesh/ synchro/ shuttle/ creeper) or components thereof

Net to net.

33 Three Point Linkages (Front/ Rear)

Net to net.

34 Turbo-Charger Net to net.

35 Water Pump or components thereof

Net to net.

36 Wiring Harness including Plug Socket

Net to net.

B. Raw Material:

1 Pig Iron 1.1 kg/kg content in export product.

2 Alloy Steel Rods/ Rounds/ Billets


3 Hot Rolled/ Cold Rolled (Sheets/ Coils)


4 Terne Coated Steel Sheets 1.05 kg/kg content in export product.

5 Plastic/ Nylon Formulation in granules/ Powder form


Note: Net content of raw material as per SION shall be of the component manufactured out of this raw material and shall not include components allowed for import.

1 No. 1 Super Enamelled Copper Wire/ Clopper Wire Rod of 8 mm electrolytic Grade

0.214 kg

2 CRNGO Sheet/ Coil 0.5mm thickness

1.381 kg

3 Aluminium Alloy 0.776 kg

4 Ball Bearing Oper Closed 6201 & 6202 or equivalent

2 Nos.

5 M.S. Sheet 0.341 kg

6 Aluminium Sheet/ CRCA Sheet (for Blades of fans)

0.257 kg

C1895 24" (600mm) complete ceiling fan with Metal Blades

7 Kraft Paper As per packing policy.

1 No. 1 Copper Sheet 1.05 kg/kg content in export product.

C1896 Copper Bowls with Lids

2 Copper Pipe of relevant 1.01 kg/kg content in

C368

Dimensions export product.

1 kg 1 Steel Tube/ Section/ Profile 0.978 kg

2 Brazing Wire 0.05 kg

C1897 Brazed Wheel Chair Components made out of Steel Tube/ Section/ Profile e.g. Frames/ Cross Bar/ Leg Rest/ Arm Rest

3 Brazing Flux 0.012 kg

C1898 Forged Safty relief Valve for LPG Cylinder made of brass

1 No. 1 Brass Rod Round 1.18 kgs/kg content in the export product.

1 No. 1 Relevant Welding Wires 2% of Steel to be Welded.

2 Bearing Taper Roller/ Spherical Roller Ball Bearing

Net to net.

3 POG 10 D 1024 + FSL Digital Tacho Overspeed Switch combinatin

Net to net.

4 Twist Knot Wire Wheel Brushes 2% of FOB value

5 DC Grinding Wheel

C1899 E.O.T. Crane

6 Relevant Stainless Steel Sheets 1.08 kg/kg content in the export product

C1900 Fabricated Articles made of SS not elsewhere specified

1 kg 1 SS Sheet/ Wide Coil/ Strips of relevant grade

1.05 kg

C1901 High Grade, Annealed Sponge Iron Powder

1 kg 1 Raw (Un-annealed) Sponge Iron Powder

1.01 kg

C1902 Finished/ Semi-Finished Ring Joint Gaskets made from Non-Alloy Steel Plates

1 No. 1 Non Alloy Steel Plates 2.80 kg/kg content in export product.

1 MT I. Major Inputs comprising of:

a) Non-Alloy Steel Melting Scrap 175 kg

b) Low Ash (Ash: 12% max.) Non-Coking Coal/ Low Ash (Ash: 15% max.) Metallurgical Coke

1100 kg

II. Additive comprising of:

a) Low Silica (Silica: 1% Max.) Limestone

195 kg

b) Bulk Ferro Alloys (Ferro - Silicon/ Ferro Manganese/ Silico-Manganese

6 kg

c) Other Ferro Alloys (Ferro Titanium/ Ferro Molybdenum/ Ferro Niobium/ Ferro Vanadium/ Ferro Nickel/ Ferro Chrome/ Charge Chrome Ferro Boron/ Ferro Phosphorous) (provided the alloying element (s) is/are actuallyPresent in the Steel)

3 kg

d) Aluminium Bars/ Wires/ Shots/ Cubes and/or Powder in Cored Wire

2.25 kg

e) Calcium Silicide Lumps and/or Powder in Cored Wire

1 kg

C1903 Hot Rolled Non-Alloy Steel Plate/ Sheet/ Strip/ Wide Coil

f) Calcined Petroleum Coke 0.4 kg

C369

g) Calcium Carbide based Desulphurisation Compound

2.6 kg

III. Miscellaneous Inputs comprising of:

a) Shaped Refractories (Fired/ un-fired bricks/ shapes)

5 kg

b) Monolithic Refractories (including Castables/ Ramming Mass/ Gunning Mixes)

4 kg

c) Special Refractories (continuous Casting Refractory namely, Ladle Shroud, M.B. Stopper, S.E. Nozzles/ Slide Gate Refractory/ HMD Lances/ LF Lances/ Argon Purging Refractories/ Tundish Striker Pads/ CeramicStones/ Tundish Turbo Stop

1 kg

d) CI/Steel Rolls for Hot Strip Mill 1 kg

e) Celox Inserts/ Oxygen Measuring Probes

0.1 No.

f) Shear Blades/ Saw Blades 0.01 kg

g) Ceramic Coated Oxygen Lancing Pipe

0.02 No.

h) Continuous Casting Powder 0.6 kg

I) Temperature Tips 0.1 Nos

j) Graphite Electrodes for Ladle Furnace

0.1 kg

k) Copper Lined Mould for Casting 0.02 kg

l) Sampler Tips 0.15 Nos.

m) Rolls for Slab Caster 0.5 kg

Note: 1. The above norm is applicable only if the export product(s) is/are manufactured through Corex Furnace-LD converter route. 2. The norms shall also be applicable for export of continuously cast steel slabs. However import item allowed atSl.No.III(d) shall not be allowed against export of such Slab and the quantity of all other import items allowed shall be reduced by 3%. 3. Maximum quantity of Low Ash Metallurgical Coke allowed against Sl.No.I(b) shall be limited to 20% of the totalquantity of 1100 kg.

1 No. 1 Graphite Block 1.57 kg/kg content in the export product.

2 Graphite Tube 1.37 kg/kg content in the export prdouct.

3 Non Alloy Steel Sheet 1.22 kg/kg content in the export product.

4 Bellows 2 Nos.

5 Bellow Seal Assembly 1 No.

6 Gasket 57 Mtrs.

7 Flame Arrestor 2 Nos.

8 PRP Blower 2 Nos.

9 Quartz Glass 1 No.

10 O Ring 9 Nos.

C1904 Graphite Heat Exchanger (Cubical Block, Shell & Tube & Circular Block Type)

11 Spring 5 Nos.

C1905 Stainless Steel Braided 1 No. 1 S.S. Braided Teflon Hose of 1.02 Mtr./Mtr.

C370

relevant dia & grade content in export product.

2 Seamless Steel Tubes of relevant dia & grade

1.02 Mtr./Mtr. content in export product.

Teflon Hose Assembly for automotive application

3 Hardware Net to net.

1 No. 1 Alloy/ Non-Alloy Hexagonal Steel Bar (For Body & Nut)

(a) 4 kg/kg content for sizes upto 2". (b) 5 kg/kg content for size above 2".

2 Ferrules (made of CRCA Sheet) Net to net.

3 Polypropylene (for Seal) 1.05 kg/kg content.

4 LDPE Granules (For 'O' Ring) 1.05 kg/kg content.

5 Nylon-6 (For Insuliner) 1.05 kg/kg content.

6 H.R. Non-Alloy Steel Coil/ Sheet (For Locknut)

3.43 kg/kg content.

C1906 Zinc Plated Liquid Tight Steel Fitting with Ferrule & Locknut (Connector) - Size 1/2" to 4"

7 Zinc 0.7% of Steel weight to be galvanized.

1 No. 1 H.R.S.S. 316 Plate 6 mm Thick for Flight

1.7 kg/kg content in flight of export product

2 S.S. 316 Sheet 3 mm Thick for casing assembly

1.2 kg/kg content in casing assembly of export product

3 M.S. Box Section 1.01 kg/kg content in export product

4 Alloy Steel Round Bar 3.0 kg/kg content in export product

5 S.S. 316 Bar 1.01 kg/kg content in export product

6 Consumable including Hard Surfacing Power

1% of FOB value

C1907 Decanter Centrifuge

7 Component As per General Note No. 4 for Engineering Product

1 No. 1 Stainless Steel Sheet of relevant grade


2 S.S. Round Bar of relevant grade 2.70 kg/kg content in the export product

C1908 Industrial Separator

3 Component As per General Note No. 4 for Engg. Product inserted by Public Notice No. 46 dated 06.11.2002

1 No. 1.Tubular Porcelain Bushings OR

Net to Net

I. Inputs for Tubular prorcelain Bushings

Maximum Quantity = KV rating of Arrestor x 0.0002 x Inputs of A-1804

II. Aluminium Ingots KV rating of Arrestor x 11 gms

III. Metal Oxide Varistor OR

Nos = KV rating of Arrestor divided by KV rating of Varistor

C1909 Lightening Arrestor (Surge Arrestor) Distribution Class

III Inputs for Metal Oxide Varistor

C371

1. Spray Dried Metal Oxide Powder OR


1. Metal or Metal Oxide as described below

a. Zinc Oxide OR


a. Zinc Metal 1.10 kg/kg content in export product

b. Bismuth Oxide OR


b. Bismuth Metal 1.10 kg/kg content in export product

c. Cobalt Oxide OR


c. Cobalt Metal 1.10 kg/kg content in export product

d. Nickel Oxide OR


d. Nickel Metal 1.10 kg/kg content in export product

e. Antimony Trioxide 1.08 kg/kg content in export product

f. Chromium Oxide 1.08 kg/kg content in export product

g. Tin Oxide 1.08 kg/kg content in export product

h. Manganese Oxide/ Manganese Dioxide OR


h. Manganese Metal OR


h. Manganese Carbonate 1.08 kg/kg content in export product

i. Polyvinyl Alcohol 0.71 gm/KV

j. Ammonium Polyacrylate 0.80 gm/KV

j. Decyl Amine Acetate 0.80 gm/KV

k.Glass Frit-Silver Oxide 0.63 gm/kv

1 No. I. Tubular Porcelain Bushings OR

Net to net

I. Inputs for Tubular Porcelain Bushings

Maximum Quantity = KV rating of Arrestor x 0.000744 x Inputof A-1804



Nos. = KV rating of Arrestor divided by KV rating of Varistor

III. Input for Metal Oxide Varistor



C1910 Lightening Arrestor (Surge Arrestor) Discharge Class I


C372

a. Zinc Oxide OR



b. Bismuth Oxide OR



C. Cobalt Oxide OR



d. Nickel Oxide OR










h Manganese carbonate 1.08 kg/kg content in export product


j. Ammonium Polyacrylate OR

1.23 gm/KV


k. Glass Frit-Silver Oxide 0.9 gm/KV


Net to net


Maximum Quantity = KV rating of Arrestor x 0.000767 x Inputs of A-1804

II Aluminium Ingots KV rating of Arrestor x 141 gms

III Metal Oxide Varistor OR Input for Metal Oxide Varistor


1 Spray Dried Metal Oxide Powder OR


Metal or Metal Oxide as described below

a. Zinc Oxide OR



C1911 Lightening Arrestor (Surge Arrestor) Discharge Class II

b. Bismuth Oxide OR


C373


c. Cobalt Oxide OR



d. Nickel Oxide OR













1.63gm/KV


k. Glass Frit - Silver Oxide 1.23gm/KV


Net to net


(KV rating of Arrestor x 0.000812 x Inputs of A-1804)


III Metal Oxide Varistor OR

Nos= KV rating of Arrestor divided by KV rating of Varistor

Input for Metal Oxide Varistor


1.04 kg/kg content in export Product

1. Metal or Metal Oxide as described Below

a. Zinc Oxide OR


a Zinc Metal 1.10 kg/kg content in export Product

b. Bismuth Oxide OR


b. Bismuth Metal 1.10 kg/kg content in export Product

c. Cobalt Oxide OR


C1912 Lightening Arrestor (Surge Arrestor) Discharge Class III

c. Cobalt Metal 1.10 kg/kg content in export Product

C374

d. Nickel Oxide OR


d. Nickel Metal 1.10 kg/kg content in export Product

e. Antimony Trioxide 1.08 kg/kg content in export Product

f. Chromium Oxide 1.08 kg/kg content in export Product

g.Tin Oxide 1.08 kg/kg content in export Product





h. Manganese carbonate 1.08 kg/kg content in export Product



2.53 gm/KV


k. Glass Frit - Silver Oxide 1.93 gm/KV

1.No. I. Tubular Porcelain Bushings OR

Net to net


Maximum Quantity = (KV rating of Arrestor x 0.000784 x Inputs of A-1804)




Input for Metal Oxide Varistor




a. Zinc Oxide OR


a.. Zinc Metal 1.10 kg/kg content in export product

b. Bismuth Oxide OR



c. Cobalt Oxide OR



d. Nickel Oxide OR



C1913 Lightening Arrestor (Surge Arrestor) Discharge Class IV

e. Antimony Trioxide 1.08 kg/kg content in

C375

export product








i. PolyVinyl Alcohol 3.56 gm/KV


3.85 gm/KV



1 No. 1.Spray Dried Metal Oxide Powder OR


1.Metal or Metal Oxide as described below

a. Zinc Oxide OR



b. Bismuth Oxide OR



c. Cobalt Oxide OR



d. Nickel Oxide OR










h. Manganese carbonate 1.08 kg/kg content in export product


C1914 Metal Oxide Varistor ## (MOV) Distribution Class

j. Ammonium Polyacrylate 0.80 gm/KV

C376

OR



1 No. 1. Spray Dried Metal Oxide Powder OR



a. Zinc Oxide OR



b. Bismuth Oxide OR



c. Cobalt Oxide OR



d. Nickel Oxide OR




i. Chromium Oxide 1.08 kg/kg content in export product

j. Tin Oxide 1.08 kg/kg content in export product








1.23 gm/KV


C1915 Metal Oxide Varistor ## (MOV) Distribution Class I





a. Zinc Oxide OR

1.08 kg/kgContent in export product

a. Zinc Metal 1.10 kg/kgContent in export product

b. Bismuth Oxide OR


C1916 Metal Oxide Varistor ## (MOV) Distribution Class II

b. Bismuth Metal 1.10 kg/kgContent in export product

C377

c. Cobalt Oxide OR


c. Cobalt Metal 1.10 kg/kgContent in export product

d. Nickel Oxide OR


d. Nickel Metal 1.10 kg/kgContent in export product

e. Antimony Trioxide 1.08 kg/kgContent in export product

f. Chromium Oxide 1.08 kg/kgContent in export product

g. Tin oxide 1.08 kg/kg content in export product





h. Manganese carbonate 1.08 kg/kgContent in export product



1.63 gm/KV






a. Zinc Oxide OR


a. Zinc Metal 1.10 kg/kgContent in export product

b. Bismuth Oxide OR


b. Bismuth Metal 1.10 kg/kgContent in export product

c. Cobalt Oxide OR


c. Cobalt Metal 1.10 kg/kgContent in export product

d. Nickel Oxide OR


d. Nickel Metal 1.10 kg/kgContent in export product

e. Antimony Trioxide 1.08 kg/kgContent in export product

f. Chromium Oxide 1.08 kg/kgContent in export product

g. Tin Oxide 1.08 kg/kgContent in export product

C1917 Metal Oxide Varistor ## (MOV) Distribution Class III



C378



h. Manganese carbonate 1.08 kg/kgContent in export product



2.53gm/KV






a. Zinc Oxide OR



b. Bismuth Oxide OR



c. Cobalt Oxide OR



d. Nickel Oxide OR











I. Polyvinyl Alcohol 3.56 gm/KV


3.85 gm/KV


C1918 Metal Oxide Varistor ## (MOV) Distribution Class IV


1 No. 1 Nitrile Rubber 1.05 kg/kg content in the export product

2 Brass Chips 1.02 kg/kg content in the export product

3 Aramid Pulp 1.05 kg/kg content in the export product

C1919 Brake Lining for Motor Vehicles with Aramid and NBR

4 Resin (relevant) 1.05 kg/kg content in

C379

the export product

5 Cellulose / Mineral / Glass Fibre 1.05 kg/kg content in the export product

6 Fellite 1.05 kg/kg content in the export product

7 Pottassium Titanate 1.05 kg/kg content in the export product

8 Zinc Oxide 1.05 kg/kg content in the export product

9 Rubber Accelerator Restricted to 2% of the weight of the Nitrate Rubber

1 km 1 Copper in the form of CC rods / Wire / Bars EC Grade


2 HDPE Compound 1.05 kg/kg content in the export product

3 Filling Jelly 1.01 kg/kg content in the export product

4 Flooding Jelly 1.01 kg/kg content in the export product

5 Poly Co Polymer 1.02 kg/kg content in the export product

6 Aluminium Foil Stock 1.02 kg/kg content in the export product

C1920 Telephone Cables of different pair and Dia U/G BSW Cable, Not elsewher specified

7 LDPE Compound 1.05 kg/kg content in the export product

1 kg. 1 Filter Paper 1.02 kg/kg content in the export product

2 Polyol 1.02 kg/kg content in the export product

3 ISO CYANATE in the ratio of 70:30

4 Perforated and Expanded Cold Rolled Steel Sheet


5 Hot Melt Polyamide Import Item No. 5&6 The two altogether be restriced up to 2% of the FOB value

6 PP mold Release Agent

7 Unit Box Import Item No. 7&8 Will be allowed as per packing policy

C1921 Polyurethane Type Air Filters

8 Multi Carton (5Ply)

1.kg. 1 Filter Paper 1.03 kg/kg content in expot product

2 Polypropylene 1.03 kg/kg content in expot product

3 Rubber Gasket On Net to net basis

4 Mold Release Agent Import Item No. 4-5&6 To be restricted upto 2% of the FOB value to be allowed as per packing policy

5 Unit Box

C1922 Plastic Air Filters

6 Multi Carton

C1923 1.No. 1 Batteries Net to net

C380

2 Elecronic Speed Controler Net to net

3 Solenoid Net to net

4 Passenger Car Tyre Not to net

5 DC brushless Battery Fan Net to net

6 Electric DC Motor Net to net

7 Plastic Sheets ABS / PMMA (poly Methyl metha-acrylate


8 Plastic Sheets (Raw material) ABS


9 Soft touch (ABS) Acrylonitrile Butadiene styrene


10 Permanent Magnet DC Motors Net to net

11 Relays Net to net

12 Watering System for batteries Net to net

13 Primaire D' Adherence

14 Hardener for 52872 Import Item NO. 14-15&16 To be allowed up to 2% of FOB value

15 Vernis Soft Feel Mat

16 Hardener

17 Back Assembly (climate control seat)

Net to net

18 Cushion Assembly (climate control seat)

Net to net

19 Controller (climate control seat) Net to net

20 Controller Interface Cable Net to net

21 Controller Power Cable Net to net

22 CD Player with Speakers Net to net

23 Relays for AC Net to net

24 Relays for Heaters Net to net

25 Alloy Wheels Net to net

26 AC Condensor Fan Net to net

27 Heater pad for Batteries Net to net

28 Charging Plug Male Net to net

29 Charging Plug Female Net to net

30 Battery Inter connects Net to net

31 Main Plug Net to net

32 Battery Harness Net to net

33 Charger Parts (Anne-2) Net to net

34 DC_DC Converter Parts (Annex-3)

Net to net

35 A/C Controller Parts (Annex-4) Net to net

36 Modular System with micro siren Net to net

37 Central unit (electronic part of central locking)

Net to net

REVA electrically operated vehicle (four wheeler)

38 Modular system (electronic part of central locking)

Net to net

C381

39 Steel Tube round 1.02 kg/kg content in the export product

40 Steel Tube Square 1.02 kg/kg content in the export product

41 Steel Sheet 1.04 kg/kg content in the export product

42 Fasteners Net to net

43 Flange Net to net

44 Brackets Net to net

45 Weldment Net to net

1 MT 1 a) Aluminium Wires/ Rods 1.01 MT/MT content in export product

b) Aluminium Alloy Wire/ Rods 1.01 MT/MT content in export product

2 a) Aluminium Ingots 1.05 MT/MT content in export product

b) Aluminium Alloy Ingots LM6/LM8)


3 MS Billets 1.18 MT/MT content in the export product

4 M.S. Round / M.S. Bars/Rods 1.15 MT/MT content in the export product

5 Non Alloy Steel Plates 1.15 MT/MT content in the export product

6 Synthetic Rubber (Grade Skyprene B-30/Grade Bayprem)


7 Neoprene Rubber Bush Net to net

8 Washers Net to net

9 Bolts and Nuts Net to net

C1924 Transmission Line Tower Hardwares and Accessories

10 Zinc 4% of Steel to be galvanized

10,000 Nos. 1 ARC Tube for MH Lamps 150 W

10200 Nos.

2 UV Block Quartz Main Tube OVISIL 482/21.7-22.9/19.5-20

263 kgs

3 Quartz Tube for Exhaust OVISIL 452 3.9-4.1/2.02

Net to net

4 Molybdenum Foil 4X0.028 204 Mtrs.

5 Tam Foil 1X0.049MM 102 Mtrs.

6 Getter ST 101/DF/50 or Getter NGE 101/DF/50

10200 Nos.

7 Ceramic Cap-R7S-10ST End Caps OR R7S Ceramic Parts

11000 Nos.

C1925 Metal Halide Lamp Double Ended Quartz Glass Shell 150 W

8 Sauereissen Cement No.13 USA Sauereissen No. 13

14 kgs.

10,000 Nos 1 ARC Tube for MH Lamps 70 W 10200 Nos.

2 UV Block Quartz Main Tube OVISIL 482/19.5-20.5/17.1-18

167 kgs

3 Quartz Tube for Exhaust OVISIL 452 3.9-4.1/2.02

Net to net

4 Molybdenum Foil 4X0.028 204 Mtrs.

C1926 Metal Halide Lamp Double Ended Quartz Glass Shell 70 W

5 Tantalam Foil 1X0.049 MM 102 Mtrs

C382

6 Getter ST 101/DF/50 or Getter NGE 101/DF/50

10200 Nos.

7 Ceramic Cap RX7S 20400 Nos.

8 Ceramic Cement Sauereissen No. 13

21 kgs.

1. Kg 1 MS CR Sheets/ Coils/ Strips 1.05 kg/kg content in export product

C1927 Fabricated Steel Hardware/ Structure/ Articles not elsewhere specified made out of MS CR Plates/ Sheets/ Coils/ Strips

2 Zinc Ingot (to be allowed only in case the export product is galvanized

0.05 kg

1 No. 1 Relevant Components As per General Note No. 4 for Engineering Product inserted by Public Notice No. 46 dated 06.11.2002

2 Honing Tools 3% of FOB value

3 Grinding Wheel

4 Drills/Deep Hole Drills

5 Reamers

6 Inserts

7 Honing Tools

8 Abrasive Brush

C1928 Distribution Type Fuel Injection Pump for Diesel Engines

9 Steel Shots

1 Nos 1 Components Net to net basis

2 CRNGO Steel Sheets 1.34 kg/kg content in export product

3 Copper Wire 1 kg/kg content in export product

4 Hot Rolled Non-Alloy Steel Sheet/Wide Coil


5 Polyester Film 1.02 kg/kg content in export product

6 Polyester Stator Lacing Cord 1 Mtr / Mtr content in export product

7 Flapper Valve Steel 1 kg/kg content in export product

8 Copper Tube 1 kg/kg content in export product

9 Aluminium Ingot 1 kg/kg content in export product

10 PBT/ Duranex 1 kg/kg content in export product

C1929 Hermetically Sealed Comressors for Refrigerators & Commercial Refrigeration Applications using Eco-friendly gases.

11 Refrigeration Oil 1 kg/kg content in export product

1 MT 1 Zinc Ash and residue containing Zinc in the range of 65-80%

1.065 MT of Zinc metal in Zinc Dross

C1930 Zinc Ingots

2 Metallurgical Coke 750 kg

C383

3 furnace Oil (LSHS)/Light Diesel Oil

175 kg

4 LPG 74 kg

Note : 1. The above norms will be applicable to primary producer using the imperial Smelting Technology.Note : 2. The applicant will also furnish clearance from the M/o. Environment and Forest for import of Zinc Ash and residues alongwith application for Advance License.

1 km 1 Continuous Cast Copper Rod/ Cathodes/ Wire Bars / Wire Rod / Copper Tape / Copper Foil (EC Grade)


2 Aluminium Ingots Rods 1.01 kg/kg content in the export product

3 XLPE C ompound/Cross Linkable LDPE Compound


4 PVC Compound OR a) PVC Resin b) Plasticizer c) Lubricant d) Filler material (Calcium Carbonate/Alumina/ Kolin

1.05 kg/kg content in the export product 0.57 kg 0.11 kg 0.01 0.31 kg

C1931 Copper / Aluminium Conductors screened with semi conducting compound, XLPE Insulated G.I Wire, Armoured / Unarmoured PVC Sheathed Cable for above 1.1 KV.

5 Semi Conducting Compound 1.05 kg/kg content in the export product

C1932 Iron Ore including Processed Iron Ore

1 MT 1 Tricone Rock Roller Bits with Nozzle Assembly

1% of FOB value of resultant product

C1933 Tungsten Wire (0.525 mm dia)

1 kg 1 Ammonium Paratungstate 1.74 Kg./Kg. Export of Tungsten Wire

1 kg 1 Molybdenum Powder 99.5% Pure

1.15 Kg C1934 Molybdenum Wire (0.82 mm dia

2 Graphite Lubricant 0.05 Kg

C1935 Cast Basalt Liner Pipe 1 kg 1 Basalt Rock 1.1 Kg

1 kg (powder content)

1 Ferro Titanium Powder (Ti-65-72%)


C1936 Ferro Titanium Cored Wire

2 CRCA Non-alloy Steel Strips 1.008 kg/kg content in export product

1 million number (190 kg.)

1 Round Brass Wire 340 kg

2 Tungsten Carbide Balls 1.02 Million No. (1.02 kg)

C1937 Ballpoint Pen Tips made of brass

3 Cutting Tools, Drill Oil & Chemical

2% of FOB value

1 No. 1 ABS 6.72 Kg

2 ABS/AS-30% GF Fiber 896 gm

3 Motor HHF - 27 BG 83 Net to net

4 Stepper Motor MP-35-A. Net to net

5 Rubber Hub 60 x20 L Net to net

6 Shaft Dia 6 x 35 mm L Net to net

7 Plastic Bush Dia 6 mm. Net to net

8 Balance Weights (3 mm/5 mm/12 mm).

Net to net

C1938 Plastic Assembly Fitted with Cross Flow Fan, Mounting Bracket, Stepper Motor and Motor

9 Drain Hose 19 mm Net to net

C384

1 kg 1 Non Alloy Steel Wide Coils 1.07 kg/kg content in export product

C1939 Galvanised Steel Tape (10 mm - 40 mm with)

2 Zinc As per Engg. Table No. 3.

1 No. 1 Diaphragms Net to net

2 Non-Alloy HR/ CR Coil 1.26 kg/kg content in the export product

3 Aluminium unwrought or Plate/Sheet/Strips MS Bar/Road


C1940 (I) Spring Brake Chamber Type-24/30 L/s (With two Diaphragms) Long Stroke (ii) Spring Brake Chamber Type - 24/30 S/S (With two Diaphragms) (iii) Spring Brake Chamber Type - 30/30 S/S (With two Diaphrams)

4 MS Bar/Rods, Spring wire/ Rod/ Bar


1 No. 1 Alloy steel rounds/bars 3.39 kg/kg content in the export product

2 Torque drive Net to net

C1941 Tapping Adaptor WES (Size 1)

3 Plate springs Net to net


2 Torque drive Net to net

C1942 Tapping Adaptor WES (Size 2)

3 Plate springs Net to net

C1943 Tapping Adaptor WEN (Size 1)


C1944 Tapping Adaptor WE (Size 1)


C1945 Tapping Adaptor WE (Size 2)



2 Circlip Net to net

3 Deep groove ball bearing Net to net

4 Shoulder Sleeve bearing Net to net

C1946 Reversible Tapping Chucks TA 12

5 Shim Net to net


2 Deep groove ball bearing Net to net

3 Shoulder Sleeve bearing Net to net

4 Shim Net to net

C1947 Reversible Tapping Chucks TA 20

5 Disc./Retaining ring Net to net

C1948 Adaptor Sub-assembly WEN 101 BG


1 No. 1 One side Zinc Coated Steel Sheet 1.12 kg/kg content in export product

2 Terne Sheet 1.12 kg/kg content in export product

C1949 Portable Generator/Internal Combustion Engine for Portable Generator/Pump Set run 3 CRNGO Silicon electrical steel

sheet 1.40 kg/kg content in export product

C385

4 Electrolytic continuous cast coper rod


5 Hot dipped Aluminium coated Steel Sheet


on Kerosine & Petrol

6 Aluminium Alloy Ingots 1.03 kg/kg content in export product

Note : Components, if required, may be allowed as per General Note No. 4 for Engg. Product inserted by Public Notice No. 46 dated 6.11.2002

C1950 Anode Slime containing Gold and Silver in Black powder form

1 kg 1 Copper Concentrate (Gold and Silver Content only) Containing Gold and Silver in Blackish Dark Green Powder Form

Gold - 1.015 kg/kg content in the export product Silver 1.085 kg/kg content in the export product

Note : 1.The gold and silver content in copper concentrate as declared in the import document is to be accounted for as per the above SION.Note : 2. The above SION is to allow duty exemption for gold and silver only. The copper contained in the concentrate will be cleared by payment of applicable customs duty.

1 No. 1 21 inches Bare Colour Picture Tube

Net to net

2 EPS As per packing policy

C1951 21 inches Colour Picture Tube (CPT) integrated with Deflection Yoke.

3 Paper (Kraft) As per packing policy

C1952 Seismic Cable- Type RSR 3 Cable double ended, 165 M long

1 No. 1 Thermoplastic Polyurethane 1.5 kg/kg content in the export product

1 No. RAW Material :-

1 Nitrite Rubber coated steel sheet/wide coil

1.79 kg/kg

2 Flapper Valve Steel sheet/wide coil

1.18 kg/kg

3 Relevant Cast iron part castings: 1.16 kg/kg of the cast iron part castings

a) Crankcase

b) Crankshaft

c) Outboard Bearing

d) Valve plate

e) Cylinder Head

Components:-

1 Piston Sintered 1 No. net to net

2 Connecting Rod 1 No. net to net

3 Cover Muffler casting 1 No. net to net

4 Roll Pin 1 No. net to net

5 Intake valve pin 2 Nos. net to net

6 Screw Outboard bearing 3 Nos. net to net

7 Muffler screw 2 Nos. net to net

8 Screw vylinder head 4 Nos. net to net

9 Screw Discharge 2 Nos. net to net

C1953 Hermetically sealed comprssor Pump Kit assembly

10 Rivet 2 Nos net to net

1 No. 1 Copper Rod 67 grams C1954 Tube light ballast 18 watts & 36 watts 2 Electrical Steel Sheets/Coils 358 grams

C386

Grade 400 & above

3 Contact Pin 2 Nos. on net to net basis

weighing 451 grams

4 Impregnated Lacquer 4% of FOB value

C1955 Cupro Nickel Tubes 1 kg 1 Cupro Nickel Scrap of relevant grade

1.09 kg

1 MT 1 a) High Carbon Ferro Chrome 0.847 kg./kg. Cr content in export product

b) Low Carbon Ferro Chrome (including Nitrogen bearing LC FeCr not exceeding 20% of total quantity)

0.847 kg./kg. Cr content in export product

2 Unwrought Nickel 1.02 kg/.kg. Ni content in export product

3 Ferro Molybdenum 1.40 kg/.kg. Mo content in export product

4 Carbon Steel Melting Scrap 1.122 kg/.kg. Fe content in export product - (0.357 x Quantity of HC & LC Ferro Chrome allowed under s.No.1) - 0.280 x quantity of Ferro Molybdenum allowed under s.No. 3)

5 Ceramic Grains (for High Chromi Castings only)

4% of FOB price

C1956 High Chrome Castings & Grinding Media Balls for iron ore grinding mills

6 Grinding Wheels (for High Chrome Castings only)

2% of FOB price

C1957 LPG R egulator/ Coupling in CKD/ Assembled Condition

1 No. 1 Relevant Zinc Alloy 1.03 kg./kg. Content in export product

1 No. 1 CRCA Prime Cold Rolled Steel/in Sheet/ coil (! Mm to 3 mm thick)

1.24 kg./kg. Content in export product

2 Non Alloy Steel Wire Rod 1.02 kg./kg. Content in export product

3 Welding Rods 1% of the weight of the Steel to be welded

4 Paints/Primer Value to be restricted within 2% of the FOB value

5 Safety Relief Disk 1 No.

C1958 Disposable Cylinder

6 Freon Valve 1 No.

C1959 Pressure Die Cast/ Sand Cast Components/ Articles made of Aluminum Alloy

1 kg 1 Relevant Aluminum Alloy Ingots 1.06 kg/kg content in export product

1 kg 1 Lead Ingot OR


C1960 Lead Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs Lead Scrap 1.06 kg/kg content in

the export product

C387

2 Tin Ingot OR


Tin Scrap 1.06 kg/kg content in the export product

3 Antimony Ingot OR


Antimony Scrap 1.06 kg/kg content in the export product

4 Copper Ingot OR


Copper Scrap 1.06 kg/kg content in the export product

4 Bishmuth Ingot OR


Bishmuth Scrap 1.06 kg/kg content in the export product

5 Zinc Ingot OR


Zinc Scrap 1.06 kg/kg content in the export product

6 Cadmium Ingot OR


Cadmium Scrap 1.06 kg/kg content in the export product

1 kg 1 Bismuth Ingot OR


1 Bismuth Scrap 1.07 kg/kg content in the export product

2 Tin Ingot OR


2 Tin Scrap 1.07 kg/kg content in the export product

3 Lead Ingot OR


3 Lead Scrap 1.07 kg/kg content in the export product

4 Antimony Ingot OR


Antimony Scrap 1.07 kg/kg content in the export product

4 Copper Ingot OR



5 Zinc Ingot OR


5 Zinc Scrap 1.07 kg/kg content in the export product

6 Cadmium Ingot OR


C1961 Bismuth Alloy in the form of : Rod/ Wire/ Strips/ Sheet/ Foil/ Preforms/ Section Tube

6 Cadmium Scrap 1.07 kg/kg content in the export product

1 kg 1 Lead Ingot OR


1 Lead Scrap 1.07 kg/kg content in the export product

C1962 Lead Alloy in the form of : Rod/ Wire/ Sheet/ Foils/ Reforms/ Sections/ Tube

2 Tin Ingot 1.03 kg/kg content in

C388

OR the export product

2 Tin Scrap 1.07 kg/kg content in the export product

3 Antimony Ingot OR


3 Antimony Scrap 1.07 kg/kg content in the export product

4 Copper Ingot OR


4 Copper Scrap 1.07 kg/kg content in the export product

5 Bismuth Ingot OR


5 Bismuth Scrap 1.07 kg/kg content in the export product

6 Zinc Ingot OR


6 Zinc Scrap 1.07 kg/kg content in the export product

7 Cadmium Ingot OR


7 Cadmium Scrap 1.07 kg/kg content in the export product

1 kg 1 Cadmium Ingot OR Cadmium Scrap


2 Tin Ingot OR Tin Scrap


3 Lead Ingot OR Lead Scrap


4 Antimony Ingot OR Antimony Scrap


5 Copper Ingot OR Copper Scrap


6 Bismuth Ingot OR Bismuth Scrap


C1963 Cadmium Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs

7 Zinc Ingot OR Zinc Scrap


1 kg 1 Cadmium Ingot OR Cadmium Scrap


C1964 Cadmium Alloy in the form of : Rod/ Wire/ Strip/ Sheet/ Foil/ Preforms/ Sections/ Tube



C389











1 kg 1 Tin Ingot OR Tin Scrap






4 Copper Ingot OR





6 Zinc Ingot OR


Zinc Scrap 1.07 kg/kg content in the export product

7 Cadmium Ingot OR


C1965 Tin alloy in the form of : Rod/ Wire/ Strip/ Sheet/ Foil/ Preforms/ Section/ Tube

Cadmium Scrap 1.07 kg/kg content in the export product

1 kg 1 Bismuth Ingot OR Bismuth Scrap




C1966 Bismuth Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs



C390







7 Cadmium Ingot OR Cadmium Scrap


1 MT 1 Copper Sulphate as per IS 261-1992.

2.987 kg

2 Zinc Sulphate in Crystalline grade/form.

2.987 kg

3 Sodium Cyanide as per IS 9352-1980.

0.386 kg

4 Xanthates. 0.412 kg

5 MIBC. 0.617 kg

6 High Chrome Grinding Media. 5.286 kg

C1967 Lead Concentrates

7 Hydrated Lime with minimum 80% CaO content; 100 MESH 90%.

1.234 kg

1 kg 1 Wire/Wire Rod of relevant grade of Steel

1.45 kg C1968 Forged Steel Balls of Size upto 12mm dia made of Non-alloy steel OR Alloy Steel OR Stainless Steel.

2 Flashing/Lapping Plates, Grinding wheels, Polishing compound.

Within 1% of FOB value of exports.

1 kg 1 Wire/Wire Rod of relevant grade of Steel

1.35 kg C1969 Forged Steel Balls of Size more than 12mm diaup to 40mm dia made of Non-alloy steel OR Alloy Steel OR Stainless Steel.

2 Flashing/Lapping Plates, Grinding wheels, Diamond dresser, Polishing compound.

Within 1% of FOB value of exports.

C1970 Geophysical Equipment-HGS 2BP Connector

1 No. 1 Thermoplastic Polyurethane 20% GF (Elastollan-R 3000)


1 kg 1 Silver Ingots 99.9% purity. OR


C1971 Silver Targets/Discs 99.9% purity.

1 Scrap Silver/Used Silver Targets/ Discs.


C1972 Computer Mechinery Parts made of E.G. Steel Sheets

1 No. 1 E. G. Steel Sheets 1.20 kg/kg content in the export product

C1973 Resessed ball bearing cages

1 kg 1 Steel Strips 1.83 kg/kg content in the export product

C1974 Resessed taper roller 1 kg 1 Steel Strips 3.20 kg/kg content in

C391

bearing cages the export product

1 kg 1 Steel Wire 1.05 kg/kg content in the export product

2 Steel Stranded Wire 1.02 kg/kg content in the export product

3 Flexible Transmission Shaft 1.02 kg/kg content in the export product

4 Components Net to Net

5 Plastic Granules 1.05 kg/kg content in the export product

6 Plastic Tubing 1.02 kg/kg content in the export product

C1975 All Types of Control and Speedometer Cables, Outer & Inner Cables (Automotive Application)

7 Zinc 1.10 kg/kg content in the export product

1 KM 1 Aluminium Ingot 68 kg

2 XLPE Compound 26 kg

3 Aluminium-Magnesium-Silicon Alloy-Ingot OR

68 kg

a) Primary unalloyed Aluminium 1.02 kg/kg Content in the export product.

b) Magnesium 1.10 kg/kg Content in the export product.

C1976 LT/HT Aerial Bunched/ Cables 1x25 + 25 SQMM

c) Silicon 1.075 kg/kg Content in the export product.




68 kg

a) Primary unalloyed Aluminium 1.02 kg/kg content in the export prodcut

b) Magnesium 1.10 kg/kg content in the export prodcut

C1977 LT/HT Aerial Bunched Cables 3x25 + 1x25 SQMM

c) Silicon 1.075 kg content in the export prodcut




93 kg

a) Primary unalloyed Aluminium 1.02 kg/kg content in the export product


C1978 LT/HT Aerial Bunched Cables 3x50 + 1x35 SQMM

c) Silicon 1.075 kg content in the export product

1 No. 1 Brass Strip 1.30 kg/kg content in export product

C1979 power Entry Components without wire harness

2 Nylon 6 Moulding Powder/Granules


1 No. 1 Aluminium Alloy Ingots 1.02 kg/kg content in export product

C1980 Electrical Aluminium Cutout

2 Brass 1.05 kg/kg content in export product

C392

3 Copper Wire Bar 1.01 kg/kg content in export product

1 No. 1 Quartzite / Quartz Powder 1250 kg

2 Bonding Adhesive (Resin/Goulac)

75 kg

3 Filler (Boric Acid or Borax, Paper / Glass Fiber, Glass and Mineral Wool)

62.5 kg

C1981 Silica Refractory Boards for Tundish / Ladle Lining

4 Wooden Moulds 0.07 Nos.

1 No. 1 Seal Dust. Net to net

2 Packing Rod Net to net

3 Bushing Net to net

4 O-Rring Net to net

5 Ring, Back Up Net to net

6 Ring Piston Net to net

7 Ring Wear Net to net

8 Seal Dust Net to net

9 Nylon Nut Net to net

10 Nut Net to net

11 Bolt Net to net

12 Washer Net to net

13 Non alloy cold drawn seamless steel tube of relevant grade

1.1 Mtr./Mtr. Content in export product

C1982 Hydraulic Cylinder for earth moving equipments

14 ERW Steel Tube 1.01 Mtr./Mtr. Content in export product

1 kg 1 Hot rolled Carbon steel sheets / strips / plates / coils other than high carbon steel

0.9765 kgs. C1983 ERW Steel Pipes / Tubes (Galvanised) ASTM Standard

2 Zinc (In kgs) As per Engg. Table No. 11.

Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11.

1 kg 1 Hot rolled Carbon steel sheets/ strips/ plates / coils other than high carbon steel

0.9765 kgs C1984 ERW Steel Pipes/ Tubes (Galvanised) other than ASTM Standards

2 Zinc (in kgs) As per Engg. Table No. 11.

Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11.

C1985 Deleted

1 kg 1 Mild Steel Round Bars As per Table given in the foot Note.

C1986 Reducing Bushings of mild steel for rigid/IMC conduit 2 Zinc (If export product is

galvanised) 0.8%of weight of export product

Note : The quantity of import of Mild Steel Round Bars to be allowed as under :- S. NO Size of export product Raw material in Kg to be allowed for 1 Kg of export product (a) (b) (c) 1 ¾"X½"X9/16"L 4.00 2 1"X½"X5/8"L 2.10

C393

3 1"X¾" X5/8"L 3.75 4 1¼"X½"X¾"L 1.80 5 1¼"X¾"X¾"L 2.35 6 1¼"X1"X¾"L 2.90 7 1½"X½"X¾"L 1.70 8 1½"X¾"X¾"L 1.80 9 1½"X1"X¾ "L 2.50 10 1½"X1¼ "X¾"L 5.00 11 2"X½"X7/8"L 1.50 12 2"X¾"X7/8"L 1.65 13 2"X1"X7/8"L 1.95 14 2"X1¼"X7/8"L 2.65 15 2"X1½"X7/8"L 3.70

C1987 Online Regulator for LPG Applications

1 No. 1 Zinc Ingot 1.10 kg/kg content in the export product



3 Pressure Gauge Net to Net

4 O-Ring Net to Net

C1988 Integrated Regulator for LPG Applications

5 QCC Type I Connector Net to Net

1 No. 1 Brass Scrap 1.075 kg/kg content in the export product


3 O-Ring Net to Net

C1989 Brass Retrofit Adaptor for LPG Applications


1 No. 1 Brass Scrap 1.075 kg/kg content in the export product


3 O-Ring Net to Net

C1990 Brass OEM Adaptor for LPG Applications





C1991 Compact Regulator for LPG Applications

4 O-Ring Net to Net




C1992 Screw Type Regulator for LPG Applications

4 O-Ring Net to Net

C1993 Brass Cages for Ball and Roller Bearings

1 kg. 1 Brass Scrap 1.22 kg/kg content in export product

C1994 Electrolytic Iron Powder (Food grade) having purity of 99.5% and above

1 kg 1 M.S. Plate 1.80 kg

C394

1 No. 1 Copper Coated M.S. Tube 1.02 Mtr./ Mtr. content in export product of relevant specification used in export item OR 1.02 kg/kg content in export product

2 Relevant refrigerant gas Net to net

3 Cyclopantane/ Solkane 141 B ( R 141 B) Halogenated Derivate of Acyclic Hydrocarbon Dichloro Fluroethane


4 Isocyanate 1.04 kgs/kg content in the export product

5 Polyol 1.04 kgs/kg content in the export product

6 Isobutane 1.04 kg/kg content in export product

7 CRCA 1.04 kg/kg content in export product

8 HIP Sheet 1.04 kg/kg content in export product

9 General Purpose Polystyrene 1.04 kg/kg content in export product

10 Polypropylene Homo Polymer 1.04 kg/kg content in export product

11 Polypropylene Copolymer 1.04 kg/kg content in export product

12 Pre-Coated Steel Sheets 1.04 kg/kg content in export product

13 Lock Prop 1.04 kg/kg content in export product

14 Double Tack Tape Net to net

15 Other Relevant component Net to net

16 ABC Moulding Tubing 1.04 kg/kg content in the export product

17 Relevant Copper Tubing 1.01 kg/kg content in the export product

18 Galvanized iron sheet/Vinyl coated galvanized iron sheet


19 LDPE/HDPE Moulding Powder / Granules


20 HIP Moulding Powder/granules 1.04 kg/kg content in the export product

21 PVC Moulding Powder/granules 1.04 kg/kg content in the export product

22 Relevant S.S. Sheets 1.04 kg/kg content in the export product

23 Solder Silver 35% 0.04% of the FOB value

24 Granules - ABS 1.04 kgs/kg content in the export product

25 Powder Paint such as Vinyl coated metal - Metlon/ Vinyl coated metal - Regular


C1995 Refrigerator

26 Lubricating Oil Net to Net basis

C395

1 No. 1 Seamless Copper Tube 1.01 kg/kg content in export product

C1996 Air Cooled Fluid Cooler

2 Heresite Coating 2% of FOB value

C1997 Copper Circle (in sheet form)

1 kg 1 Copper Cathode 1.03 kg

1 No. 1 Polyol 0.63 kg of the weight of the Foam

2 Isocyanate 0.42 kg of the weight of the Foam

3 Relevant Fabric/Leather cloth 1.10 Sq.m/Sq.m content

4 CRCA Mild Steel Sheets 1.05 kg/kg content in export product

5 Gas Spring Net to net

6 Chair Mechanism Net to net

C1998 Chairs

7 Caster Net to net

1 No. 1 Relevant Pre laminated/ Plain particle Board

1.05 Sq.m/Sq.m content in export product

2 CRCA Mild Steel Sheet 1.05 kg/kg content in export product

3 Relevant Aluminium Alloy Ingot OR


Relevant Aluminium Alloy Sections


C1999 Modular Work Station

4 PVC Plastic Sheet (8mm to 25mm wide)

1.02 Metre/Metre content in export product

C2000 Stainless Steel Travelling Guard

1 kg 1 Cold Rolled Stainless Steel Sheet Coil of relevant grade

1.05 kg

1 kg 1 Precious metal Ores & Concentrates containing any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium. OR

1.02 kg/kg content of precious metal in export product

C2001 Platinum Ingots Min Purity 99.95% Palladium Ingots Min Purity 99.95% Gold Ingots Min Purity 99.5% Silver Ingots Min Purity 99.9% Rhodium Powder Min Purity 99.5% Iridium Powder Min Purity 99.5% Ruthenium Powder Min Purity 99.5% Osmium Powder Min Purity 99.5%.

2 Waste and Scrap of precious metal or metal clad with precious metal; other waste and Scrap containing precious metal or precious metal compounds of a kind used principally for the recovery of any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium.

1.02 kg/kg content of precious metal in export product

Note : Each of the precious metal contained in the above input material as declared in the import

C396

documents is to be accounted for in the export product.

1 kg 1 Non Alloy Steel Round Bar 1.10 kg/kg content in export product

C2002 Expansion Fasteners made of Non Alloy Steel

2 Non Alloy Steel Sheet 1.47 kg/kg content in export product

1 MT 1 Non-alloy Steel melting Scrap, Pig Iron/Hot Metal, Sponge Iron including Hot Briquetted Iron (HBI)

1150 kg

2 Low Silica Lime Stone 76 kg

3 a) Bulk Ferro Alloys (Ferro Silicon/ Ferro Manganese/ Silicon Manganese)

8.4 kg

b) Special Ferroalloys/ metals (Ferro Chrome/ Ferro Vanadium/ Ferro Niobium/ Nickel Oxide Sinter/ Ferro Nickel/ Ferro Aluminium/ Ferro Titanium/ Ferro Boron/ Ferro Phosphorous/ Magnesium Metal/ Ferro Molybdenum)

2.6 kg

4 Additives:

a) Aluminium wires/ scraps/ shots/ ingots and/ or Aluminium Powder in Cored wire.

3.0 kg

b) CaSi/ café Lumps, CaFeAL/ caFe/ CaSi Powder in Cored wire

0.5 kg

c) Met coke/ Raw Pet. Coke/ Coke/ Calcined Pet Coke

4 kg

5 Consumables/ Misc.

a) Rolls for caster and rolling mill 0.5 kg

b) Copper mould for casting 0.02 kg

c) Casting Powder 1 kg

d) Rolling Mill Oil/ Hydraulic Oil/ Lubricating Oil

3 kg

e) Celox Inserts/ Oxygn Probes/ Sampler Probes

0.10 kg

f) Shear Blades/ Saw Blades 0.01 kg

g) Oxygen Lance Pipes 0.12 kg

h) Temperature Tips/ Sampler Tips/ Thermodynamic elements

0.20 kg

I) Graphite Electrodes 2.4 kg

6 Refractories:

a) Shaped Refractories (Fired/ Unfired Bricks/ Shapes)

3 kg

b) Monolithic Refractories (including Castables, ramming mass/ gunning mixes)

6 kg

c) Special Refractories i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles

1 kg

C2003 Hot rolled Non-alloy Steel (Pickled/ Un-pickled) Plates/ Sheets/ Strips/ Wide Coil

7 Energy Sources:

C397

a) LPG (for Supersonic Oxygen lance in EAF)

4 kg

b) LDO (or preheating of ladle and heating of thin slab in tunnel furnace)

20 kg

c) Natural Gas/ LNG (for Tundish & SEN heating)

0.25 SCM

Note: 1. This norm is applicable for export product manufactured through Electric Arc. Furnace (CONARC process) - Thin Slab Caster - Hot Strip Mill. Note: 2. Quantity of Pig Iron/ Hot Metal and Sponge Iron/ HBI allowed against S. No. 1 shall not exceed 60% and 35% respectively of the total quantity permitted therein. Note: 3. Import of Silico manganese allowed at S. No. 3 (a) shall not exceed 60% of the total quantity of import. Note: 4. Special Ferro Alloy (s)/Metal against S. No. 2 (b) will be allowed only if the respective alloying elements (s)/ metal is/ are actually present in the export product.

C2004 Black Pipe 1 MT 1 Hot rolled carbon steel strips/ coils/ plates other than high carbon steel

1.05 MT

C2005 Precision Steel Tubes 1 MT 1 Cold rolled carbon steel strips/ coils/ plates other than high carbon steel

1.05 MT

1 No. 1 CRCA Steel Strip 0.6 x 12 OR


Spring Net to Net

2 CRCA Steel Strip 0.18 x 0.9 OR


Membrane/ Diapharagm Net to Net

3 Alu-Zinc Steel Strip 1.25 x 118.4 OR


Housing Net to Net

4 Super Enameled Copper Wire/Copper Wire

1 kg/kg content in the export product

5 ABS Black OR


Trumpet Net to Net

6 Glue 1% of FOB value of export

C2006 Trumpet Horns

7 Other relevant components As per General Note No. 4 for Engg. Product.

C2007 Rubber Bonded Grinding Wheel

1 No. 1 Aluminium Oxide Synthetic, Silicon Carbide, Depolymerised


1 kg 1 Relevant Stainless Steel Sheets / plates

1.08 kg/kg Content

2 Relevant Stainless Steel Pipes / Tubes

1.05 kg/kg Content

C2008 Mass Transfer Equipment / Column Internals

3 Relevant Fasteners Net to Net basis

C2009 Carbide Heading Dies 1 No. 1 Carbide Inserts 1 No. (net to net)

1 Tone 1 Titanium Scrap (containing 85-95% Ti)

825 kg

2 Ferro Silicon (70-75% Si) 25 kg

C2010 Ferro Titanium (Lumps/ Granules/Powders)

3 Steel Melting Scrap 190 kg

C2011 Nickel Cadmium Pocket Plate Batteries in

1 No. 1 Nickel Hydroxide Powder (45-65% Nickel + Cobalt)


C398

OR

Hydrated Nickel Sulphate OR

Net to Net basis

Nickel Anode Net to Net basis

2 Cadmium Hydroxide OR


a) Cadmium Oxide (87.25% Cadmium)


b) Graphite Flakes (99.62% Carbon Min.)


3 C.R. Steel Strips/Perforated Steel Strips (0.08 to 0.1 mm thick)


4 Lithium Hydroxide (Monohydrated / Solid)


5 Potassium Hydroxide 1.02 kg/kg content in the export product

Polypropylene Containers with Spares and standard accessories

6 Polypropylene Granules 1.05 kg/kg content in the export product

1 kg 1 Tin ingots OR


C2012 Tin Powder

Tin Scrap 1.03 kg/kg content in the export product

C2013 Silicon Carbide Briquettes containing 90% Silicon Carbide Crude

1 kg 1 Silicon Carbide Crude 0.916 kg

1 No. 1 HR Plates/ HR Wide Coils (thickness greater than and equal to 5 mm) of relevant grade of steel

1.20 Kgs/Kg content in the export product

2 HR Sheets/ HR wide Coils (thickness less than 5 mm) of relevant grade of steel

1.09 Kgs/Kg content in the export product

3 Paint & Thinner 3% of FOB value

C2014 Wheels for Agricultural and Forestry Equipment such as Tractors, Backhoc Loaders, Lagskidders and Skid Steers (weight range 21 Kgs to 59 Kgs)

4 Welding Wire/ Flux 3% of weight of Steel to be welded

1000 kg 1 Non-alloy Steel Melting Scrap 735 kgs

2 Ferro Alloys comprising of Low Carbon (C:0.10% max.) Ferro Chrome/ Low Phosphorus (P:0.10% max.) Ferro Manganese OR

642 kgs

a) Low Carbon (C:0.10% max.) Ferro Chrome

468 kgs

b) Low Phosphorus (P:0.10% max.) Ferro Manganese/ Manganese Metal / Manganese Nitride

130 kgs

C2015 Bars and Rods of Exhaust Valve Steel in ground finished condition

3 Unwrought Nickel 58 kgs

Note: In case "Alloy Steel Scrap" is used in place of "Non Alloy Steel Scrap" as at Sr. No. 1, quantities of items at Sr. No. 2/2 (a), 2 (b) and Sr. No. 3 shall be reduced proportionately depending upon the content of "Chromium/ Manganese/ Nickel in the Alloy steel Scrap.

C2016 Non Alloy Steel Wire Woven Mesh

1 kg 1 High Tensile Non Alloy Steel Wire of relevant grade & Dia.

1.02 kg

C2017 Hub Shell (Weight 294 1 No. 1 Non Alloy Steel Round of relevant grade

660 gms

C399

gms) (Bicycle part)

1 MT 1 SS Wire of relevant grade and diameter OR


C2018 Stainless Steel Wire Mesh/ Netting

SS Wire Rod of relevant Grade 1.05 MT/MT content in export product

1 MT 1 SS Wire of relevant grade and Diameter OR


C2019 Stainless Steel Wire Braid

SS Wire Rod of relevant grade 1.07 MT/MT content in export product

1 No. (weight 511 gms)

1 Non-Alloy Steel Sheet 250 gms

2 Bakelite Powder / Granules 162 gms

C2020 Jar Sealer (Weight 200 gms for import item No. 1, 155 gms for import item No. 2 & 156 gms for import item No. 3

3 Non-Alloy Steel Rod 200 gms

1000 Nos 1 Relevant Aluminium Alloy Tube in Coil Form OR


C2021 Tubular Aluminium Alloy Knitting Pins / Needles

Relevant Aluminium Alloy Tube in cut length

Net to net

1.0 kg 1 Metal Powders:

a) carbonyl Iron Powder 1.05 kg/kg content in the export product

b) SS Metal Powder 1.05 kg/kg content in the export product

c) Nickel Powder 1.05 kg/kg content in the export product

d) Other Relevant Metal Powder 1.05 kg/kg content in the export product

2 Binders:

a) Polypropelene Upto 2% of FOB value of exports

b) Paraffin Wax -do-

c) Krayton Flake -do-

C2022 Complex Shaped Metal Components manufactured through Metal Injection Molding

d) Stearic Acid -do-

1.0 kg 1 Stainless Steel Wire OR


Stainless Steel Rod 1.05 kg/kg content in export product

C2023 Stainless Steel Screens for Filtration / Separation

2 Stainless Steel Rings Net to net

1 No. 1 Speed Control Pull Chain Switch Net to net

2 Pull Chain Switch for lighting Net to net

3 Pressure type wire connector Net to net

4 Side Switch (Plastic case) Net to net

5 Ceiling Fan Wooden Blades Net to net

6 Blade Shank Net to net

7 Lamp Holder Net to net

8 Pull Chain for Switch Net to net

C2024 "52" Decorative Ceiling Fans with 5 wooden blades and 4 lamps (weight 11 kgs)

9 Ball Bearing Net to net

C400

10 capacitor Net to net

11 CC Copper Rod 0.291 kg

12 CRNGO Steel Sheet 2.61 kg

13 EC Gr. Aluminium for Rotor 0.190 kg

14 Kraft Paper As per packing Policy

15 CRCA Sheet EDD Gr. For top and bottom cover

0.716 kg

16 Glass Sleeve 1.5 mm 204 mm dia 3 mm 204 mm dia 8 mm 102 mm dia

1 No. 1 Finished Components Net to net

2 Unfinished Forgings Net to net (in numbers)

3 Unfinished Castings Net to net (in numbers)

4 Non Alloy Steel 1.47 kg/kg content in the export product

5 Pig Iron

a) For casting wt. Above 10 kg.& upto 100 kg.


b) For casting wt. Above 100 kg 1.20 kg/kg content in the export product

6 Consumables 4% FOB value of export product

C2025 I.C. Engine 3 H.P. - 28 H.P

7 HS Diesel As per the general note for fuel under Sl. No. 8





5 Pig Iron

a) For casting wt. Above 10 kg & upto 100 kg

1.25 kg/kg content in the export prodcut

b) For casting wt. Above 100 kg 1.20 Kg/kg content in the export product


C2026 I.C. Engine above 28 H.P. - 720 H.P

7 HS Diesel As per the general note for fuel under Sl. No. 8





5 Pig Iron

C2027 I.C. Engine above 720 H.P

a) For casting wt. Above 10 kg & 1.25 kg/kg content in

C401

upto 100 kg. the export prodcut

b) For casting wt. Above 100 kg. 1.20 kg/kg content in the export product

6 Consumables 4% FOB value export prodcut

7 HS Diesel As per the general note for Fuel under Sl.No. 8.




4 Non Alloy Steel 1.47 kg/kg content in the export prodcut

5 Pig Iron

a) For casting wt. Above 10 kg & upto 100 kg.


b) For casting wt. Above 100 kg. 1.20 kg/kg content in the export prodcut

6 Consumables 4% FOB value of export prodcut

C2028 Genset from 3 KVA upto & including 20 KVA

7 HS Diesel As per the general note for Fuel under Sl. No. 8.



3 Unfinished Castingsd Net to net (in numbers)


5 Pig Iron





C2029 Genset from above 20 KVA upto & including 600 KVA





4 Non alloy Steel 1.47 kg/kg content in the export product

5 Pig Iron




C2030 Genset above 600 KVA

6 Consumables 4% FOB value of

C402

export product 7 HS Diesel As per the general

note for Fuel under Sl. No. 8.




4 Non alloy Steel 1.47 kg/kg content in the export product

5 Pig Iron





C2031 Pump set from 3 H.P. upto & including 28 H.P.


1 No. 1 CRNGO Sheets 1.37 kg/kg content in export product

2 Copper Rods 1.01 kg/kg content in export product

3 Aluminium Ingots Grade LM6 1.06 kg/kg content in export product

4 EN-8 Steel Bar 1.20 kg/kg content in export product

5 Ball / Roller / Sleeve Bearings Net to net

6 Insulation Material 1.05 kg/kg content in export product

7 Automatic Voltage Regulator (AVR)

Net to net

C2032 A.C. Generator 0 to 625 KVA

8 Single Core Copper Insulated Cable Class - H

1.02 Metre/Metre content in export product

1 kg 1 Cold Rolled Wide Coils/Strips (as-rolled/annealed/annealed & pickled) of relevant grade of Stainless Steel OR

1.22 kgs

Hot Rolled Wide Coils/Strips (pickled/un-pickled) of relevant grade of Stainless Steel OR

1.29 kgs

C2033 Stainless Steel Minted Coins/Coin Blanks

Slab of relevant grade of stainless Steel

1.33 kgs

1000 kgs 1 Hot Rolled Non-Alloy Steel Strips /Wide Coils

1.118 kgs./1 kg. CR steel content in export product.*

2 Zinc Slab / Ingots 0.435 x Mass of Zn-Al-Si Alloy as per Engineering Table X (New additional Table No. to be allotted)

C2034 Cold Rolled Zinc (43.5%) & Aluminium - Silicon (56.5%) alloy coated Non-alloy Steel Sheets / Strips / Wide Coils with / without Resin coating.

3 Aluminium-Silicon Alloy Slab / 0.565 x Mass of Zn-

C403

Ingots Al-Si Alloy as per Engineering Table X (New additional Table No. to be allotted).

4 Resin (permitted against export of Resin coated products only)

As per Engineering Table XX (New additional Table No. to be allotted).

5 Rolling Mill Rolls 1.25 Kgs

6 Rolling Mill Oil 0.35 Kg

7 Picking Oil 0.45 Kg

8 Steel Strapping for Packing As per Packing Policy.

9 Galvanished Plain Sheets for packing

As per Packing Policy.

Note: The following formula shall be adopted to work out the quantity of CR Steel content in export: CR Steel content = (Mass of export product) - (Mass of Zn-Si alloy as per Table/1.05) - (Mass of Resin as per Table/1.015, if resin coated).

C2035 Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.4 mm dia

1 km As per Engineering Table No. 9 (6)





1 No. 1 Plain and seamless pipe of relevant diameter-4" to 7-1/4" OD (1/2" more dia than finished HWDP)

8.347 meters

2 Relevant steel bar stock 1.6065 meters

3 Relevant Coating material 0.1434 Gallons

4 Hard banding material such as tungsten carbide, Armcor M, Arnco XT series, Smooth X,

2.73 kg

C2038 Heavy weight drill pipes 3-1/2" OD to 6-5/8" OD, length 9.45 Meters to 9.76 Meters (31 feet to 32 feet) having coating thickness of 5-9 mil (125 to 225 microns) of phenolic/epoxy/modified urethane/ epoxy powder

5 Threading inserts 0.20 Sets

C2039 Silicon metal 99% minimum

1 MT 1 Silicon metal 94-96% puirity 1.05 MT

C2040 Resistance Welding Products namely, Spot Welding Electrodes Cap/Tip

1 kg 1 Relevant Rod of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper.


C2041 Resistance Welding Products namely,

1 kg 1 Relevant Plate of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel


C404

Projection Welding Electrodes/Dies

Silicon Chromium Copper, Beryllium Copper & Silver Copper.

C2042 Resistance Welding Products namely, Seam Welding Electrodes/Wheels/Discs

1 kg 1 Relevant Billet of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper.


C2043 Resistance Welding Products namely, Flash Welding Electrodes/Dies/Jaws

1 kg 1 Relevant Billet of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper.


C2044 Resistance Welding Products namely, Mould Plates, Made of Copper, Chromium Copper, Chromium Zirconium Copper Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper.

1 kg 1 Relevant Plate of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper.


C2045 Contact tape (Tinned) 1 kg 1 Brush Alloy (Untinned) 17410 1.01 kg/kg content in the export product.

engineering products sl. no. export item ... - eepc india · 2 galvanized high carbon steel wire...

Documents