emheater - prom electric · 2018. 4. 30. · ema~emd series servo motor: emm-60/80 series...

China EM Technology Limited

Products Selection Guide

Address: No.80,Baomin 2 road Xixiang, Bao’an district, Shenzhen, China

Tel: +86-755-29985851

Fax: +86-755-29970305

Zip code: 518101

Website: www.emheater.com

China EM Technology Limited

EMHEATER®

EMHEATER®

Brake UnitMatch inverter: 0.75KW~630KW

Brake resistor & Aluminum resistorPower range: 15W~20KWResistance value: 0.01Ohm~100KOhmMatch inverter: 0.75KW~630KW

Welcome to visit EMHEATER Group Corporation!

We have 6 factories and more than 820 staff. As a professional manufacturer of industrial automation products, we are always dedicated to soft starter, frequency inverters, servo motor and drive, EMI filters, harmonic wave AC chokes, sine wave filters and brake units and resistors. In the year of 2008, EMHEATER Group does have established “China EM Technology Limited” to cultivate oversea market.

We have following mature series product：EM-GJ3 series soft starter, EM9 series sensorless vector control inverter, EM10 series vector control inverter with PG (including elevator and lift drive). EM11 series vector control inverter, EMA to EMD series servo motor drive system.

And relative accessories, such as input filter, output filter, input choke , output choke, DC choke and sine wave filter, brake unit and resistor and aluminum resistor.

Our company's feature is good products with competitive price!

We are sincerely looking for worldwide partners to cooperate with us to build a win-win market environment.

Input & output filter and AC chokeVoltage range: 220V~690VPower range: 0.75KW~630KW

Sine wave filterVoltage range: Three phase 220V~690VPower range: 0.75KW~630KW

DC ChokeVoltage range: DC 500V~700VPower range: 0.4KW~560KW

1 Soft Starter

3 EM11 Series Frequency Inverter

2 EM9 Series Frequency Inverter

4 Servo Drive & Servo Motor

5 AC Filter and AC/DC Choke

6 Brake Unit and Resistor

Type:

EM11-S series: Vector control inverter for Servo

EM11-L series: Vector control inverter for Lift

EM11-T series: Torque control frequency inverter

EM11-G series: Vector control frequency inverter for General use

EM11-G1E/G3E: Economy vector control inverter for General use

EM11-P series: Vector control frequency inverter for Fan or Pump

Voltage range: 220V/380V/480V/690V.

Power range: 0.75KW~450KW.

Type:EM-GJ series: Soft starter for general use

Voltage range: 220V/380V/480V/690V.

Power range: 0.75~600KW.

Type:

EM9-B series: Vector control inverter for Ball mill machineEM9-C series: Vector control inverter for CNC machine

EM9-E series: Vector control inverter for Energy saving control cabinet

EM9-H series: Vector control inverter for Heavy load

EM9-G series: Vector control inverter for General useEM9-P series: Vector control inverter for Fan or PumpEM9-Z series: Vector control inverter for Injection machine

Voltage range: 220V/380V/480V/575V/690V

Power range: 0.75KW~630KW

Servo drive: EMA~EMD seriesServo motor: EMM-60/80 SeriesEMM-110/130 SeriesEMM-180 SeriesEMM-220 SeriesVoltage range: 220V/380VVoltage range: 220V/380VPower range: 0.2KW ~ 22KW

2 3

4 7

8 11

12 16

17 20

20 21

Company Introduction Product Series

Current(A)

External Shape(mm)

InstallationDimensions(mm)

Power(KW)Model Soft Starter

Cabinet ModelGJ2(220V) GJ3(380V) GJ4(480V) GJ2 GJ3 GJ4 W1 H1 D W2 H2 d

EM-GJ series Soft Starter is a new type start-up equipment which integrates electric force and electronic techniques , computer technique and modern control theory. It is the new generation product to replace the conventional Star-delta Starter, Self-coupling voltage-drop Starter and Magnetic control voltage-drop Starter.Supply Power Breaker Input AC Choke Input AC Filter

AC Motor Output AC Choke Output AC Filter

DC Choke( )Improve power factor

Brake Unit

Brake resistor

Peripheral Devices Connection

Three phase power supply

Circuit breaker(QF)

By-pass contactor(KM)

Motor soft starter

Operation control panel

12 control terminals

AC Motor

Product Introduction

Product Features

Reduce the starting current, reduce power supply peak current, reduce the cost of distribution equipment. Reduce the abrasion of motor, improve the service life of mechanical equipment.

Optional starting parameters are convenient in one soft starter starting different motors.

Soft starter inspects motor feedback voltage to realize closed loop control, ensure the motor start-up success in different conditions and different loads.

A variety of starting ways: voltage ramp starting way can get the maximum output torque; Current limiting can realize biggest limitations of the soft start starting current.

Reliable quality assurance: using computer simulation design; SMT production process; Excellent electromagnetic compatibility performance; High temperature aging, vibration test of the machine before delivery.

Perfect and reliable protection function: loss of voltage, less voltage, over voltage protection; overheating, starting time too long; Input phase lost, output phase lost, three-phase imbalance; starting over current, overload and load short circuit protection, etc.

Full dynamic control field-bus monitoring starter, easy networking.

LED displaying screen can display parameter code, state and error.

Model Introduction

EM - GJ 3 - 015 [C]

EMHEATERSoft starter

GJ: General Use

Product Type

2: 3 PH 220~240V3: 3 PH 380~460V4: 3 PH 460~500V

Input Voltage Adaptable Motor

015: 15KW5d5: 5.5KW

EM-GJ3-5d5

EM-GJ3-7d5

EM-GJ3-011

EM-GJ3-015

EM-GJ3-018

EM-GJ3-022

EM-GJ3-030

EM-GJ3-037

EM-GJ3-045

EM-GJ3-055

EM-GJ3-075

EM-GJ3-090

EM-GJ3-115

EM-GJ3-132

EM-GJ3-160

EM-GJ3-185

EM-GJ3-200

EM-GJ3-250

EM-GJ3-280

EM-GJ3-320

EM-GJ3-355

EM-GJ3-400

EM-GJ3-450

EM-GJ3-500

EM-GJ3-600

EM-GJ4-5d5

EM-GJ4-7d5

EM-GJ4-011

EM-GJ4-015

EM-GJ4-018

EM-GJ4-022

EM-GJ4-030

EM-GJ4-037

EM-GJ4-045

EM-GJ4-055

EM-GJ4-075

EM-GJ4-090

EM-GJ4-115

EM-GJ4-132

EM-GJ4-160

EM-GJ4-185

EM-GJ4-200

EM-GJ4-250

EM-GJ4-280

EM-GJ4-320

EM-GJ4-355

EM-GJ4-400

EM-GJ4-450

EM-GJ4-500

EM-GJ4-600

–

–

EM-GJ2-5d5

EM-GJ2-7d5

–

EM-GJ2-011

EM-GJ2-015

EM-GJ2-018

EM-GJ2-022

EM-GJ2-030

EM-GJ2-037

EM-GJ2-045

EM-GJ2-055

–

EM-GJ2-075

EM-GJ2-090

EM-GJ2-100

EM-GJ2-115

EM-GJ2-132

EM-GJ2-160

EM-GJ2-185

EM-GJ2-200

EM-GJ2-220

EM-GJ2-250

EM-GJ2-315

5.5

7.5

11

15

18.5

22

30

37

45

55

75

90

115

132

160

185

200

250

280

320

355

400

450

500

600

5.5

7.5

11

15

22

30

37

45

55

75

90

115

132

160

185

200

250

280

320

355

400

450

500

600

5.5

7.5

11

15

22

30

37

45

55

75

90

115

132

160

185

200

250

220

18.5

–

–

–

18.5

–

100

315

11

15

23

30

37

43

60

75

90

110

150

180

230

264

320

370

400

500

560

640

710

800

900

1000

1200

C: Cabinet type

Product Series Option

146 270 160 131 247 M6

146 270 160 131 247 M6

146

146

146

146

146

146

146

146

146

270

270

270

270

270

270

270

270

270

160

160

160

160

160

160

160

160

160

131

131

131

131

131

131

131

131

131

247

247

247

247

247

247

247

247

247

M6

M6

M6

M6

M6

M6

M6

M6

M6

257 525 194 195 377 M8

257

257

257

257

257

525

525

525

525

525

194

194

194

194

194

195

195

195

195

195

377

377

377

377

377

M8

M8

M8

M8

M8

290 560 245 260 465 M8

290

290

290

560

560

560

245

245

245

260

260

260

465

465

465

M8

M8

M8

330 590 245 300 490 M8

330 590 245 300 490 M8

450 740 300 400 575 M10

450 740 300 400 575 M10

EM-GJC5d5-

EM-GJC5d7-

EM-GJC110-

EM-GJC510-

EM-GJC810-

EM-GJC220-

EM-GJC030-

EM-GJC730-

EM-GJC540-

EM-GJC550-

EM-GJC570-

EM-GJC090-

EM-GJC511-

EM-GJC231-

EM-GJC061-

EM-GJC581-

EM-GJC002-

EM-GJC052-

EM-GJC082-

EM-GJC023-

EM-GJC553-

EM-GJC004-

EM-GJC054-

EM-GJC005-

EM-GJC006-

1 Soft StarterSolution

1 2

Model Voltage(V) Power(KW) Current(A)


EM9 G/P3 Series(Three phase to three phase 380V~460V)

90mm

11

5m

m

Suitable for : EM-GJ3-5d5 ~EM-GJ3-600

Bypass output Delay output Fault output Instant stop Stop Start Common DC4-20mA output

- +

>50 >50

>100

>100

>10

Air out

Air intake

By-pass output

Time-delayoutput

Failure output Instantaneous Stop Start-up Public

DC4-20mA output

- +

W1 D W2 d(Mount screw)

H1

H2

KM

Motor

Squirrel-cage 3-phase asynchronous motor

VU W 3 4 5 6 7 8 9 10 11 12

By-passcontanctors

Instantaneous Start-up PublicStop +-

DC 4 ~20mAanalog output

KM(By-pass contactor)

2FU

1 2L11 R L12 S L13 T

1FU

L1 L2 L3

QF(circuit breaker)

Time-delay output Failure outputSoft starter

Main circuit connection diagram

EM9 series frequency inverter is a brand-new vector high-performance frequency inverter. By decoupling control of motor magnetic flux current and torque current to achieve rapid-response and accurate torque control, can run a wide range of high-precision speed and torque control operation. Which is suitable to industrial automation the in every field.

1 2 3 4 5 6 7 8 9 10 11 12

Soft Starter 2 EM9 Series Vector Frequency Inverter


Product Features

Input voltage range:220V/380V/480V/575V/690V ±15%.

Input frequency range:47~ 63Hz.

Output voltage range:0 ~ rated input voltage.

Output frequency range:0 ~ 600Hz.

Overload capacity: 60s with 150%of rated current, 10s with 180% of rated current.

Self study motor parameter function.

Control mode: Sensorless Vector Control (SVC);Constant Torque; V/F Control.

Speed accuracy: Sensorless Vector Control: ±0.5% of maximum speed (SVC).

Starting torque: 150% of rated torque at 0.5Hz (SVC).

Programmable timing running(Simple PLC).

In all model inverters integrated IGBT are used.

The malfunction ratio is 0.1% within 18 months warranty.

Model Introduction

EM9 - G 3 [C] - 015

EMHEATER EM9 series

frequency inverter

B: Ball millC: CNC machineE: Energy saving control cabinetH: Heavy loadG: General useP: Fan or PumpZ: Injection machine

Product Type

1: 1 PH 200~240V2: 3 PH 220~240V3: 3 PH 380~460V4: 3 PH 460~500V6: 3 PH 560~690V

Input Voltage

015: 15KW5d5: 5.5KW

C: Cabinet type

Product Series Option Adaptable Motor

EM9-G1-0d4

EM9-G1-d75

EM9 G1 Series(Single phase to three phase 200V~240V)

EM9-G1-1d5

EM9-G1-004

EM9-G1-7d5

EM9-G1-2d2

EM9-G1-5d5

EM9-G1-011

220

220

220

220

220

220

220

220

0.4 2.5

0.75

1.5

2.2

4

5.5

7.5

11

4

7

10

16

23

30

45



EM9-G/P3-037

EM9-G/P3-055

EM9-G/P3-075

EM9-G/P3-132

EM9-G/P3-185

EM9-G/P3-220

EM9-G/P3-045

EM9-G/P3-090

EM9-G/P3-110

EM9-G/P3-160

EM9-G/P3-200

380

380

380

380

380

380

380

380

380

380

380

37

55

90

132

185

220

45

75

110

160

200

60

90

150

210

300

380

75

110

176

250

340

EM9-G3-d75

EM9-G/P3-1d5

EM9-G/P3-2d2

EM9-G/P3-5d5

EM9-G/P3-7d5

EM9-G/P3-004

EM9-G/P3-011

380

380

380

380

380

380

380

380

2.50.75

1.5

2.2

4

5.5

7.5

11

4

6

10

13

17

25

32EM9-G/P3-015

EM9-G/P3-022

EM9-G/P3-018

EM9-G/P3-030

380

380

15

30

18.5 37

45

EM9-G/P3-280

EM9-G/P3-350

EM9-G/P3-450

EM9-G/P3-560

EM9-G/P3-250

EM9-G/P3-315

EM9-G/P3-400

EM9-G/P3-500

EM9-G/P3-630

380

380

380

380

380

380

380

380

380

280

350

450

560

250

315

400

500

630

470

600

690

860

420

520

640

750

950

38022 1100

Keypad Size Installation Direction

3 4

Technical Characteristics

EM9 Series Vector Inverter

Input Single phase 220V, three phase 220V/380V/480V/690V ±15%, 47~ 63 Hz.

Maximum output voltage is same with input power.

100% continuous output

150% rated current 1 minute, 180% rated current 10 seconds.

Sensorless vector control, V/f control, Torque control optimization vector PWM.

Frequency (speed) input. Moment input. Location input.

Keypad. External terminal (2 line control. Three line control). RS485

Digital input. Analog input. Multiple speed. PID set. Serial communication RS485 setting, etc

0.00-600.00 Hz.

Digital: 0.01 Hz simulation: 0.05 Hz

0~3600s

0.5 K - 15.0 KHz

Single phase 220V, three phase 220V/380V/480V/690V ±15%, 47~ 63 Hz.

Automatic torque boost. Fixed torque boost curve, arbitrary V/f curve optional.

0.5 Hz / 150% rated torque.

1: 100(no sensor vector).

Plus or minus 0.5% maximum speed.

AVR function effectively, keep output voltage stable.

Automatic limit output current, avoid frequent over current trip.

Brake frequency: 0.1 ~ maximum frequency braking time 0 ~ 50 seconds brake current: 0 ~ 150% rated.

6 channels programmable terminal input.

AI1:0 ~ 10 V input, AI2:0 ~ 10 V or 0 to 20 mA input.

1 channel output.

1 channel output.

Two ways of output, 0/4 ~ 20 mA and 0 ~ 10 V.

LED digital tube display frequency converter of relevant information.

LCD liquid crystal display converter code information.

Can upload and download converter code information, realizing fast parameter copy.

Short circuit, the flow, overvoltage, undervoltage, lack of phase, overheating, external fault, communication malfunction,PID feedback fault, brake unit fault, the motor self learning problem and so on 25 studies fault protection.

Less than 1000 meters above sea level, clean, no oil mist, no corrosive gas, no direct sunlight

o o-10 C ~ +40 C, 20% ~ 90% RH (no frost).

Less than 0.5 g.

o o-25 C ~ +65 C.

Wall (0.75 KW ~ 132 KW), floor type electric control cabinet (160 ~ 400 KW).

IP20

Forced air cooling (controlled)

SpecificationItems

Maximum output voltage

Output feature

Over-load capacity

Control mode

Input mode

Operation mode

Frequency setting mode

Frequency control range

The resolution of the input frequency

Acc/ Dec time

Carrier frequency

Voltage/frequencycharacteristic

Torque boost

Start torque

Speed control ratio

Moment control accuracy

Output voltage adjustment

Current automatic limiter

DC brake

Programmable digital input

Programmable analog input

Open collector output

Relay output

Analog output

LED display

LCD display

Parameter copy

Protection function

Installation site

Applicable ambient

Vibrate

Storage ways

Installation ways

Protection level

Type of cooling

Output

Basic control function

Peripheral port function

Keyboard display

Protection

Use condition

~

~

3 phase power supply380V ± 15% 50/60Hz

Multifunction digital input 1






DC Reactor(Power above 160KW built-in)

Brake unit

Brake resistorP

N

P

PB

P1 P N

R

S

T

U

V

W

A02

M

V IJ15

Jumper of voltageor current input

Analog output 0/4-20mA or 0-10V

GND

A01

GND

Analog output0-10V

X1

X2

X3

X4

X5

X6

Y1

COM

Y2

COM

Multifunction opencollector output

Multifunction opencollector output

458+ 458+

458- 458-

PE

RA

RB

RC{Relay output

0-10V0-4 - 20mA Main input

Frequency PID setting

COM

PE

24V

+10V power supplyfor frequency setting

AI1 multifunction s analog input

AI2

GND

PE

VS ISJ11

Jumper of voltageor current input

Inverter

PE

Wiring Connection Diagram

Keypad Dimension

Size Model

L1(mm) W1(mm) D1(mm) L2(mm) W2(mm)

Keypad(Under 11KW)

Keyboard(Above 15KW) 135.2

97.5 58

74.5 21.3

17

130.8

90

70.8

56.4


5 6

Rated input voltage


Installation Dimension

120mm or aboveVentilate fan

50mm or above

120mm or above

Safe space and distance Installation of multiple inverter

Inverter

Inverter

0.75-11KW The dimension of the machine

15-132KW The dimension of the machine

160-630KW The dimension of the machine

Installation Direction


Rated Output Power(KW)

Input VoltageA

(mm)B

(mm)H

(mm)W

(mm)D

(mm)Installation Hole

(mm)

0.4~1.5

2.2

0.75~2.2

4~5.5

7.5

11~18.5

22~30

37~55

75~93

110~132

160~200

220~250

280~315

350~450

500~630

Single Phase 220V-15%~+15%

Three Phase 380V-15%~+15%

79

111.5

111.5

136.5

202.5

170

200

250

300

320

–

–

–

–

–

132 140 85 125 4

156.5 170

156.5 170

125

125

162

162

5

5

205 220 150 175 5

287.5 300 216 212 6

350

444

590

659

858

370

465

610

584

883.5

1400

1600

1700

1700

2200

274

300

360

424

504

574

760

850

850

1200

226

235

299

324

338

430

480

482

523

550

9

9

9

11

11

–

–

–

–

–

–

–

–

–

–

3 EM11 Series Vector Frequency Inverter


EM11 series frequency inverter is based on the accurately understanding of EMHEATER for customer’s requirements, inheriting the consistent pursuit of EMHEATER for high-quality, high reliability. EM11 series frequency inverter will bring you a new using experience with its excellent performance and powerful features.

Product Features

EM11 is first class frequency inverter with very strong software and hardware.

It has servo drive feature, with perfect speed control mode, and excellent torque control mode.

It can save 2 group motor parameters , and can drive synchronous motor and asynchronous motor.

It has sensor-less vector control (SVC), vector control+ PG; V/F control and V/F separation control.

It has 49 kinds digital input functions and 38 kinds digital output functions.

It has S curve of acceleration and deceleration, user can self defined S curve turning time.

The IGBT carrier frequency can auto adjustment according to heatsink temperature.

35 kinds protection function, including auto detecting short circuit after power on.

Including textile swing frequency and skip frequency function, etc.

Overload Capacity:60s with 150% of rated current, 3s with 180% of rated current.

All model built-in RS485 card, and approved by CE.

Model Introduction

EM11 - G 3 [C] - 015

EMHEATER EM11 series

frequency inverter

G: General useH: Heavy load L: LiftP: Fan or PumpS: ServoT: Torque control

Product Type

1: 1 PH 200~240V2: 3 PH 220~240V3: 3 PH 380~460V4: 3 PH 460~500V6: 3 PH 560~690V

Input Voltage

015: 15KW5d5: 5.5KW

C: Cabinet typeE: Economy type

Product Series Option Adaptable Motor

EM11-G1-d75

EM11 G1/G2 Series(Single/Three phase to three phase 200V~240V)

EM11-G1-1d5

EM11-G1-2d2

220

220

220

0.75

1.5

2.2

4

7

9.6



380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

EM11-G2-d75

EM11-G2-1d5

EM11-G2-2d2

EM11-G2-5d5

EM11-G2-7d5

EM11-G2-004

EM11-G2-011

220

3.80.75

1.5

2.2

4

5.5

7.5

11

5.1

9

13

25

32

45

60EM11-G2-015

EM11-G2-022

EM11-G2-018

15

18.5 75

9122

220

220

220

220

220

220

220

220

220


EM11-G3-d75

EM11-G/P3-1d5


EM11-G/P3-2d2

EM11-G/P3-5d5

EM11-G/P3-004

380

380

380

380

380

2.10.75

1.5

2.2

4

5.5

3.8

5.1

9

13

220

EM11-G2-030 30

EM11-G/P3-037

EM11-G/P3-055

EM11-G/P3-075

EM11-G/P3-132

EM11-G/P3-185

EM11-G/P3-220

EM11-G/P3-045

EM11-G/P3-090

EM11-G/P3-110

EM11-G/P3-160

EM11-G/P3-200

EM11-G/P3-030

EM11-G/P3-280

EM11-G/P3-350

EM11-G/P3-450

EM11-G/P3-250

EM11-G/P3-315

EM11-G/P3-400

37

55

90

132

185

220

45

75

110

160

200

30

280

350

450

250

315

400

60

91

150

210

304

377

75

112

176

253

340

465

585

725

426

520

650

820

EM11-G/P3-022

EM11-G/P3-018

EM11-G/P3-015

EM11-G/P3-011

EM11-G/P3-7d5

112

220EM11-G2-037 37 150

380

380

380

380

380

22

18

15

11

7.5

45

37

32

25

17

7 8

SpecificationItems SpecificationItems

Maximum frequency Vector control: 0~300Hz ; V/F control: 0~3000Hz

0.5~16KHz (The carrier frequency is automatically adjusted based on the load features.)

Digital setting: 0.01Hz; Analog setting: maximum frequency x 0.025%.

Sensor-less vector control(SFVC); Closed-loop vector control(CLVC); V/F control.

G type: 0.5Hz/150%(SFVC); 0Hz/180%(CLVC). P type: 0.5Hz/100%.

1:100(SFVC); 1:1000(CLVC); 1:50(V/F)

±0.5%(SFVC); ±0.02%(CLVC).

±10%(SFVC); ±5%(CLVC)

Automatic torque boost; Manual boost 0.1%~30.0%.

Straight-line V/F curve.Multi-point V/F curveN-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power)

Two types: complete separation; Half separation.

Straight-line ramp; S-curve ramp; Four groups of acceleration/deceleration time with the range of 0.0s~6500.0s.

DC braking frequency: 0.00Hz~maximum frequency.Braking time: 0.0s~36.0s.Braking trigger current value: 0.0%~100.0%.

JOG frequency range: 0.00Hz~50.00Hz.JOG acceleration/deceleration time: 0.00s~6500.0s.

It realized closed loop control system easily.

It can keep constant output voltage automatically when the mains voltage fluctuation.

The current and voltage are limited automatically during the running process so as to avoid frequency tripping due to over voltage/ over current.

It can auto limit running current of frequency inverter to avoid frequency tripping.

(Excavator characteristics) It can limit the torque automatically and prevent frequency over current tripping during the running process. Torque control can be implemented in the VC mode.

The load feedback energy compensates the voltage reduction so that the frequency inverter can continue to run for a short time.

To avoid frequency over current faults of the frequency inverter.

Five groups of virtual DI/DO can realize simple logic control.

Time range: 0.0~6500.0 min

It supports communication bus via Modbus-RTU, PROFIBUS-DP, CANlink and CANopen.

Carrier frequency

Input frequency resolution

Control mode

Startup torque

Speed adjustable range

Speed stability accuracy

Torque control accuracy

Torque boost

V/F curve

V/F separation

Acceleration/Deceleration curve

DC braking

JOG control

Built-in PID

Auto voltage regulation(AVR)

Over voltage/Over current stall control

Rapid current limit function

Torque limit and control

High performance

Instant power off not stop

Rapid current limit

Virtual I/O

Timing control

Multiple communication protocols

Standard functions

Individualized functions


G type: 60s for 150% of the rated current, 3s for 180% of the rated current.P type: 60s for 120% of the rated current, 3s for 150% of the rated current.

Overload capacity

It realizes up to 16 speeds via the simple PLC function or combination of DI terminal states.

Built-in simple PLC, multiple speeds

Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology.

The optional I/O extension card enables AI3 to receive the motor temperature sensor input(PT100, PT1000) so as to realize motor overheat protection.

It supports various encoders such as differential encoder, open-collector encoder, resolver, UVW encoder, and SIN/COS encoder.

It supports the operation of frequency inverter parameters and virtual oscillograph function, by which the state of frequency inverter can be monitored.

Key panel; Control terminals; Serial communication port; You can switch between these giving in various ways.

There are 10 kinds frequency giving; digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting.You can switch between these giving in various ways.

There are 10 kinds auxiliary frequency giving. It can implement tiny tuning of auxiliary frequency and frequency synthesis.

Motor overheat protection

Multiple encoder types

Advanced background software

Running command giving

Frequency giving

Auxiliary frequency giving

Two motors can be switched by two groups of motor parameters.Multi-motor switchover

Input terminal

Operation

Standard:6 digital input(DI) terminals, one of which supports up to 50Hz high-speed pulse input.2 analog input(AI) terminals, one of which supports 0~10V voltage input and the another supports 0~10V voltage input or 0~20mA current input expanding capacity:Many DI terminals. 1 AI terminal that supports -10V~10V voltage input.

It displays the parameters.

It is optional, supports panel display in Chinese or English language.

Optional LCD keypad can copy parameters.

It can lock the keys partially or completely and define the function range of some keys so as to prevent misoperation.

Motor short-circuit detection at power-on, input/output phase loss protection, over current protection, over voltage protection, less voltage protection, overheat protection and overload protection, etc.

Less than 95% RH, without condensing.

LCD display

Parameters copy

Key locking and function selection

Protection mode

Humidity

o o o o-10 C ~ +40 C(De-rated if the ambient temperature is between 40 C and 50 C).Ambient temperature

Operation

Standard:1 high-speed pulse output terminal (open-collector) that supports 0~50Hz square wave signal output.1 digital output(DO) terminal.1 relay output terminal.2 analog output(AO) terminals, one of them supports 0~20mA current output or 0~10V voltage output expanding capacity:Many DO terminals.Many relay output terminals.

Output terminal

LED display

Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.

Installation location

Lower than 1000m.Altitude

2Less than 5.9m/s (0.6G)o o-20 C ~ +60 C.

Vibration

Storage temperature

Display and keypad operation

Environment

EM11 Three phase 380V~690V inverter diagram

Breaker Contactor

EM11

10kΩ

Keypadinterface

( Switchable)

Analog input/Analog output/485 transform

R/L1

S/L2

T/L3

PB P+ P-

U/T1

V/T2

W/T3

DI1

DI2

DI3

DI4

DI5

HDI

FM

COM

DO1

CME

+10V

AI1

GND

DC 0~10VDC 0~20mAAI2

485+485-

J2 J8 J9 JP1

J6 J5 J4 J31

2

3

1

2

3

1

2

3

1

2

3

TA

TB

TC250V AC/1A 30V AC/1A

(DC 0~10V) AO2

GND

P

P

P

P

P

P

AO1

Three phase ACpower supply

Grounding

Multi-function input 1






Multi-function output

Multi-function output

Analog input

Modbus communicationsRS485

Analog input reference voltage(DC 0~10V)

PG expansion card interface

Communications expansion

card interface

Function terminalexpansion card

interface

Shielded cable Twisted pair shielded cables

Relay output

Analog output 2

Analog output 1

Motor grounding

Externalbraking unit

External braking resistor

Main Circuit

Control Circuit

( Switchable)DC 0~10VDC 0~20mA

EM11 Series Vector Inverter EM11 Series Vector Inverter

9 10

The all digital AC servo driver adopt DSP+FPGA architecture to obtain fast data collection and processing, as well as high integration density and reliability. By using optimized PID control algorithm, accurate fully digital control of torque, speed and position have been achieved. With sufficient digital & analog interfaces, and output of position feedback pulse division and the zero pulse widening, variety of control device can be supported.

EMA Servo Driver

EMA 05 A WRated Output Power Power Voltage Encoder Type

EMB Servo Driver

EMB 15 A IRated Output Power Power Voltage Encoder Type

EMC Servo Driver

EMC 60 A IRated Output Power Power Voltage Encoder Type

EMD Servo Driver

EMD 1A B RRated Output Power Power Voltage Encoder Type

Keypad Dimension


Rated Output Power(KW)

Input VoltageW

(mm)W1

(mm)H

(mm)H1

(mm)D

(mm)Installation Hole

(mm)

0.4~1.5

0.75~4

5.5~7.5

11~15

18.5~30

37~45

55~75

90~110

132~200

220~280

315~400

Single Phase 220V-15%~+15%

Three Phase 380V-15%~+15%

83

160

220

290

320

410

420

560

720

66 166 152 118 Φ4.5

148 247 235 177 Φ5.5

126 349 334 194 Φ7

230

230

320

320

420

455

555

635

654

848

1018

440

540

610

630

820

980

218

240

239

303

403

403

Φ7

Φ10

Φ12

Φ12

Φ14

600 Φ14

EM11 G1/G3E series operating keypad diagram EM11 G3 series operating keypad diagram

Installation Dimension

0.4KW~15KW installation dimensions diagram

18.5KW~110KW installation dimensions diagram

CAUTIONRead the instruction manual

Disconnect power and ensure "ON" indicator

LED is off before performing inspection

or maintenance

2-dW1

W1

W

H1 H

M

RUNSTOP

RESET

DATAENTER

PROESC

Hz

KCLY KEYPAD

RUN DR LOCAL TRIP

2-Φd

D

D

132KW~450KW installation dimensions diagram

W

H

D W

H

D

Model W(mm) H(mm) D(mm)

G1/G3E series 59.0 99.0 16.0

Model W(mm) H(mm) D(mm)

G3/P3 series 69 93 17

Sign Specification

05 500W

08

10

800W

1000W

Sign SignSpecification Specification

A 220V

IIncremental

Encoder

WWire-saving

Encoder


Specification Description

Sign Specification

15 1.5KW

25

30

2.5KW

3.0KW


A 220V

AAbsoluteEncoder

IIncremental

Encoder

AAbsoluteEncoder

Sign Specification

6.0 6.0KW


A 220V IIncremental

Encoder

B 380V

Sign Specification

1A 11KW

1E

1H

15KW

18KW


B 380V R Resolver

2B 22KW

4 Servo Drive & Servo Motor11 12

118 106.5 185 175.5 157 Φ4.5

840 1129 1100 423720 Φ14

2.2 118 106.5 185 175.5 157 Φ4.5

CAUTIONRisk of injury and electric shock.

Wait 10 mins for capacitor discharge after

disconnecting power supply.

Read manual before installation.

Ensure proper earth connection.

M

RUNSTOP

RESET

DATAENTER

PROESC

Hz

KCLY KEYPAD

RUN DR LOCAL TRIP

Hz A V

REMOTE

TRIP

DIR

RUN

DATAENTER

PRGESC

RUN STO

P

RESET

Hz A V

REMOTE

TRIP

DIR

RUN

DATAENTER

PRGESC

RUN STO

P

RESET

PRG

ESCMF•K

RUN

QUICK

STOP

RESET

KEYPAD

Hz

RUN DIR LOCAL TRIP

PRG

ESCMF•K

RUN

QUICK

STOP

RESET

KEYPAD

Hz

RUN DIR LOCAL TRIP


Items EMA

PowerSingle phase or Three phase AC 220V

(-15%~+10%, 50/60Hz)

Environment

Temperature

Humidity

Vibration

Operating emperature: 0~40 C; Storage emperature:-40~ 70o ot t C

o<90 C(Non-condensing)

2<0.5G(4.9m/s ) 10~60Hz(Non-continuous operation)

Control mode

(1) Position control mode(2) Speed control mode(External analog signal / internal parameters)(3) Torque control(4) Position&Speed hybrid control(5) Speed&Torque hybrid control(6) Torque&Position hybrid control

Regenerative brake Built-in Built-in or External

Feature

Speed frequency response

Speed fluctuation

Vibration

≥600Hz

Below 0.03%(Load fluctuation 0 ~ 100%, at rated speed)

1:5000

Input pulse frequency 0~500KHz

Regenerative brake

Programmable IO output:(1) Servo ready(2) Servo alarm(3) Position completed(4) Electromagnetism brake(5) Speed reached(6) Torque reached(7) Origin regression(DSZR) completed(8) Zero speed signal

Control output

Position control mode

Input pulse type

Electronic gear

Feedback pulse

(1) Pulse+direction; (2) CCW pulse/CW pulse; (3) Two-phase A/B quadrature pulse

Setting range: 1~65535/1~65535

Adjustable according to the encoder

Speed control mode(1) 8 steps internal speed settings(2) External analog signal(DC -10 ~ +10V)

Torque control mode(1) 4 steps internal torque setting(2) External analog signal(DC -10~ +10V)

Torque limited Function Torque limited range: -300 ~ +300%

Acc/Dec function Parameters setting: 1~10000ms (1~1000r/min or 1000~0r/min)

MonitoringMotor speed, Current position, Command pulse accumulation, Position deviation, Motor torque, Motor current, Rotor position, Command pulse frequency, Control mode, IO signals etc.

ProtectionOverspeed, overvoltage, undervoltage, overcurrent, overload, brake abnormal, encoder error, overheated, excessive position deviation, IPM temperature error, Input power phase loss, etc.

Display and operation 5/6-digit LED panel, 4 keys,2 LED lights, support shift operation

Communication CAN, RS232/RS485

(1) Servo enable (2) Alarm clearing(3) CCW drive forbidden(4) CW drive forbidden(5) Deviation counter clearing(6) Pulse command disenabled(7) Zero-speed clamp(8) CCW torque limitation(9) CW torque limitation(10) Control mode switch(11) Internal position selection 1(12) Internal position selection 2(13) Internal position selection 3(14) Internal speed selection 1

(15) Internal speed selection 2(16) Internal speed selection 3(17) Internal torque selection 1(18) Internal torque selection 2(19) Electronic gear ratio selection 1(20) Electronic gear ratio selection 2(21) Speed direction selection 1(22) Speed direction selection 2(23) Speed direction reverse(24) Emergency stopping(25) Launch the origin back(26) Origin back reference point(27) Internal position running startup signal

Servo Drive & Motor Servo Drive & Motor

13 14

EMB EMC

Three phase AC 220V/380V (-15%~+10, 50/60Hz)

External braking resistor (P+, PB);External braking unit (P+, (-))

Internal position mode 8 steps internal position command set by parameters

Motor speed, Current position, Command pulse accumulation, Position deviation, Motor torque, Motor current, Rotor position, Command pulse frequency, Control mode, IO signals, Drive temperature, Busbar voltage, etc.

Application load’s moment of inertia Less than 5 times of motor inertia Less than 3 times of motor inertia

Items EMD

Power Three phase AC 380V - 15%~+10%, 50/60Hz)(

Environment

Temperature

Humidity

Vibration

Operating emperature: 0~40 C( +40 C~+50 C, please derate it in use ); Storage emperature:-40~ 70o o o ot t C

o<90 C(Non-condensing)

2<0.5G(4.9m/s ) 10~60Hz(Non-continuous operation)

Control mode

(1) Position control mode(2) Speed control mode(External analog signal / internal parameters)(3) Torque control(4) Position&Speed hybrid control(5) Speed&Torque hybrid control(6) Torque&Position hybrid control(7) Pressure closed-loop control mode(8) Position closed-loop control mode

Regenerative brake External braking resistor (P+, PB); External braking unit (P+, (-))

Feature

Speed frequency response

Speed fluctuation

Vibration

≥300Hz

Below 0.03%(Load fluctuation 0 ~ 100%, at rated speed)

1:5000

Input pulse frequency Differential input: 0~500KHz; Open collector input: ≤200kpps

Regenerative brake

Programmable IO output:(1) Servo ready(2) Servo alarm(3) Position completed(4) Electromagnetism brake(5) Speed reached(6) Torque reached(7) Origin regression(DSZR) completed(8) Zero speed signal(9) Double-discharge plunger pump switch signal

Control output

Position control mode

Input pulse type

Electronic gear

Feedback pulse

(1) Pulse+direction; (2) CCW pulse/CW pulse; (3) Two-phase A/B quadrature pulse

Setting range: 1~65535/1~65535

Adjustable according to the encoder

Speed control mode(1) 8 steps internal speed settings(2) External analog signal(DC -10 ~ +10V)

Torque control mode(1) 4 steps internal torque setting(2) External analog signal(DC -10~ +10V)

Torque limited Function Torque limited range: -300 ~ +300%

Acc/Dec function Parameters setting: 1~10000ms (1~1000r/min or 1000~0r/min)

Monitoring

ProtectionOverspeed, overvoltage, undervoltage, overcurrent, overload, brake abnormal, encoder error, overheated, excessive position deviation, IPM temperature error, Input power phase loss, etc.

Display and operation 6-digit LED panel, 9 keys, 1 LED lights, support shift operation, user can freely define shortcut menu.

Communication CAN, RS232/RS485

(1) Servo enable (2) Alarm clearing(3) CCW drive forbidden(4) CW drive forbidden(5) Deviation counter clearing(6) Pulse command disenabled(7) Zero-speed clamp(8) CCW torque limitation(9) CW torque limitation(10) Control mode switch(11) Internal position selection 1(12) Internal position selection 2(13) Internal position selection 3(14) Internal speed selection 1

(15) Internal speed selection 2(16) Internal speed selection 3(17) Internal torque selection 1(18) Internal torque selection 2(19) Electronic gear ratio selection 1(20) Electronic gear ratio selection 2(21) Speed direction selection 1(22) Speed direction selection 2(23) Speed direction reverse(24) Emergency stopping(25) Launch the origin back(26) Origin back reference point(27) Internal position running startup signal(28) Oil pressure control PID parameter selection

Internal position mode 8 steps internal position command set by parameters

Motor speed, Current position, Command pulse accumulation, Position deviation, Motor torque, Motor current, Rotor position, Command pulse frequency, Control mode, IO signals, etc.

Application load’s moment of inertia Less than 2.5 times of motor inertia

Position closed- loop control

Pressure closed- loop control

The external coder or grating ruler can realize full-closed loop control of position

3 ways of external analog input (DC -10V~+10V)

60/80 Series servo motorThe max torque is up to 300% of rated torque.The max current is up to 300% of rated current.The max speed is up to 4500rpm.Be used to drive the feed shaft of various machineries.Various models (200W~1000W, with brake etc).Standard mounted wire-saving encoder 2500P/RStandard protection configuration is IP65.

Servo motor

The max torque is up to 300% of rated torque.The max current is up to 300% of rated current.The max speed is up to 3200rpm.Be used to drive the feed shaft of various machineries.Various models (1.0KW~3.1W, with brake etc).Standard mounted Incremental encoder 2500P/R.Optional absolute encoder 131072P/RStandard protection configuration is IP65.

180 Series servo motorThe max torque is up to 300% of rated torque.The max current is up to 300% of rated current.The max speed is up to 3000rpm.Be used to drive the feed shaft of various machineries.Various models (2.5KW~5.0KW, with brake etc).Standard mounted Incremental encoder 2500P/R. Standard protection configuration is IP65

220 Series servo motorThe max torque is up to 300% of rated torque.The max current is up to 300% of rated current.The max speed is up to 2250rpm.Be used to drive the feed shaft of various machineries.Various models (7.5KW~22.0KW, with brake etc).Standard mounted Resolver.Standard protection configuration is IP54

Specification Description

EMM - 60 S 006 A W 2 2

Product Series Motor SeriesDesigningSequence

Rated Torque Rated Speed Encorder Option parts Shaft end

W: Wire-saving Encoder 2500P/RA: Absolute Encoder 131072P/RI: Incremental Encoder 131072P/RR: Resolver

1: None2: With Oil Seal3: With Brake4: With Oil Seal, With brake.

1: Flat, Without keys (Standard)2: Flat, With keys, With Screw Thread

EMHEATER Servo motor

S: Standard (220V)E: Enhanced (380V)

006: 0.64N.m013: 1.27N.m016: 1.60N.m024: 2.40N.m032: 3.20N.m

A: 3000rmpB: 2500rmpC: 2000rmpD: 1500rmpE: 1000rmp

60/80 Series110/130 Series180 Series220 Series

Servo Motor Servo Drive

Series Speed(rmp) Power(KW) Model Single phase 220V Three phase 380V

60

3000

3000

80

110

130

180

220

0.20 EMM-60S006A EMA-05A[ ] –

0.40 EMM-60S013A EMA-05A[ ] –

3000

3000

3000

0.50

0.75

1.00

EMM-80S016A

EMM-80S024A

EMM-80S032A

EMA-08A[ ]

EMA-08A[ ]

EMA-10A[ ]

–

–

–

2500

2500

1.00

1.57

EMM-110S040B

EMM-110S060B

EMB-15A[ ]

EMB-15A[ ]

–

–

2500 1.00 EMM-130S040B EMB-15A[ ] –

2500

2500

1000

2500

2000

1000

2500

2000

1500

1000

2000

1500

1.30

1.57

0.63

1.96

1.57

0.79

2.60

2.10

1.57

1.00

3.10

2.35

EMM-130S050B

EMM-130S060B

EMM-130S060E

EMM-130S075B

EMM-130S075C

EMM-130S075E

EMM-130S100B

EMM-130S100C

EMM-130S100D

EMM-130S100E

EMM-130S150C

EMM-130S150D

EMB-15A[ ]

EMB-15A[ ]

EMA-10A[ ]

EMB-25A[ ]

EMB-25A[ ]

EMA-10A[ ]

EMB-30A[ ]

EMB-30A[ ]

EMB-25A[ ]

EMA-10A[ ]

EMB-30A[ ]

EMB-30A[ ]

–

–

–

–

–

–

–

–

–

–

–

–

2000

2000

2000

2000

1000

1000

1000

1000

3.00

4.00

5.00

6.00

2.50

3.00

4.00

5.00

EMM-180S[E]143C

EMM-180S[E]191C

EMM-180S[E]239C

EMM-180S[E]287C

EMM-180S[E]239E

EMM-180S[E]287E

EMM-180S[E]382E

EMM-180S[E]478E

EMC-60A[ ]

EMC-60A[ ]

EMC-60A[ ]

EMC-60A[ ]

EMC-60A[ ]

EMC-60A[ ]

EMC-60A[ ]

EMC-60A[ ]

EMC-60B[ ]

EMC-60B[ ]

EMC-60B[ ]

EMC-60B[ ]

EMC-60B[ ]

EMC-60B[ ]

EMC-60B[ ]

EMC-60B[ ]

Motor Adapter Table

1500 11.00 EMM-220E700D – EMD-1AB[ ]

2000 11.00 EMM-220E525C – EMD-1AB[ ]

1500 15.00 EMM-220E955D – EMD-1EB[ ]

1500 7.50 EMM-220E478D – EMD-1AB[ ]

2000 15.00 EMM-220E716C – EMD-1EB[ ]

2000 22.00 EMM-220E10EC – EMD-2BB[ ]

Servo Drive & Motor Servo Drive & Motor

110/130 Series servo motor

15 16

The function of input AC choke(reactor) matched with frequency inverter. Because frequency inverter often suffers from surge current and surge voltage impact, which will be seriously damaged performance and service life of frequency inverter and variable frequency drive. so there is requirement to add input reactor in front of the frequency inverter to boycott the surge voltage and surge current, protect the converter and debugger and prolong its service life and prevent harmonic interference. And because the frequency inverter is the variable frequency speed regulation way, so when frequency inverter works, it often produce high harmonic wave and produce waveform distortion, it will affect the normal equipment use, therefore, must add AC reactor at input/output side of frequency inverter , to short wavelengths, limits the harmonic voltage and harmonic current, and improve power quality.

The input and output AC choke of China EM technology limited uses the advanced technology by the high quality silicon steel and steel line. It has low temperature, low noise, simple operation and easy management characteristics.

EMHEATER AC choke can matched with all brand frequency inverter, such as Siemens, schneider, ABB, Vacon , Danfoss, Yaskawa, Fuji, Hitachi, mitsubishi and our own EM8, EM9, EM10 series frequency inverter.

Perfect solution products of EMI problem. Eliminate harmonic wave lower than 1%.

Excellent noise rejection.

Effectively reduce electromagnetic interfere of inverter.

Input filter is installed on the input side of the inverter.

Match with all kinds inverter for motor driving, elevators and other equipment .

Input filter is specially designed based on the frequency-domain characterization of inverter input interfering electric networking and other digital equipments.

Good performance of suppressing common mode and differential mode interference.

Suitable for the working place with strict requirement of circumstance. Suitable for the switching power supply, UPS, ATM, bill counter, embroidery machine, fuel dispenser, engraving machine, controller, industrial computer, scientific analysis instrument as well as the other electron equipments and inverter equipments.

1. Maximum operating voltage: 460VAC

2. Operating frequency: 0-120Hz

4. Hipot test voltage(one mimute)

P---E: 2700VDC

P---E: 2250VDC

5. Operating temperature: -25℃~+85℃

3. Switching frequency: 16KHz max


2. Operating frequency: 50/60Hz


P---E: 2700VDC

P---E: 2250VDC


5. Min. resistance: Line to Ground at 500VDC: 200MΩ

Input AC filter(Three phase)

Output AC filter(Three phase)


Advantage Feature

Technical Data


2. Operating frequency: 50/60Hz


P---E: 2000VDC

P---E: 1760VDC



4.Maximum leakage current: Line to Ground at 250VAC 50Hz: 0.3mA(10-20A);0.5mA(30-50A) 1.0mA(75-100A);0.002mA(B types)

Input AC filter(Single phase)Voltage(V) Power(KW) Current(A)

220

220EM-FIT1-1d5 1.5

0.75

7

4

Model

EM-FIT1-d75

220

220

220

220

220

220

EM-FIT1-004

EM-FIT1-7d5

EM-FIT1-015

4

7.5

15

2.2

5.5

11

16

30

55

10

25

42

EM-FIT1-2d2

EM-FIT1-5d5

EM-FIT1-011

Cx Cx Cx

Cy

Cx Cx Cx

Cy

Cx CxR R Cx R

L1

L2

L3

L '1

L '2

L '3

Output Filter

EM-FOT3-d75

EM-FIT3-1d5

Input Filter

EM-FIT3-d75

EM-FIT3-004

EM-FIT3-7d5

EM-FIT3-015

EM-FIT3-2d2

EM-FIT3-5d5

EM-FIT3-011

EM-FIT3-022

EM-FIT3-132

EM-FIT3-018

EM-FIT3-110

EM-FIT3-037

EM-FIT3-220

EM-FIT3-055

EM-FIT3-280

EM-FIT3-090

EM-FIT3-350

EM-FIT3-030

EM-FIT3-185

EM-FIT3-045

EM-FIT3-250

EM-FIT3-075

EM-FIT3-315

EM-FIT3-500

EM-FIT3-400

EM-FIT3-560

VoltageModel Power Current

(V) (KW) (A)

EM-FOT3-1d5

EM-FOT3-004

EM-FOT3-7d5

EM-FOT3-015

EM-FOT3-2d2

EM-FOT3-5d5

EM-FOT3-011

EM-FOT3-022

EM-FOT3-132

EM-FOT3-018

EM-FOT3-110

EM-FOT3-037

EM-FOT3-220

EM-FOT3-055

EM-FOT3-280

EM-FOT3-090

EM-FOT3-350

EM-FOT3-030

EM-FOT3-185

EM-FOT3-045

EM-FOT3-250

EM-FOT3-075

EM-FOT3-315

EM-FOT3-500

EM-FOT3-400

EM-FOT3-560

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

0.75

1.5

2.2

4

5.5

7.5

11

15

18.5

22

30

37

45

55

75

90

110

132

185

220

250

280

315

350

400

500

560

5

5

8

8

16

16

30

30

45

60

75

100

120

150

200

250

300

400

400

500

630

650

700

800

1000

1200

45


Advantage Feature

Reducing working frequency inver ter and DC speed regulator interference to other devices, like harmonic interference, waveform distortion.

Enhance the capability of frequency inverter resistance to voltage unbalance degree. (Unbalance degree > 1.8% of rated voltage).

Protection frequency inverter rectifier modules and related components damage from pinnacle capacitive current due to low internal power resistance. (When power supply capacity is 5 times larger than frequency inverter capacity).

Improve the power factor of power supply, lower harmonic current content in the inverter power supply.

Reduce current and voltage waveform distortion rate, improve the quality of power supply.

Technical Data

1. Rated working voltage: AC 3/380V~480V.

2. Tolerance voltage test: 3.5KV, AC/50Hz/5mA/60s.

3. Application of frequency: 0~60Hz.

4. Power: 0.4~600KW.

5. Working noise: <55dB.

Input and Output AC Choke(Reactor)

6 Insulation resistance: 1000VDC: >100MOhm..

Reduce motor noise, eddy current losses and reduce motor temperature rise.

Lower current leakage resulting from higher harmonic wave, reduce RF

interference to peripheral equipment.

Smooth the inverter output voltage and current waveforms, reducing transient

voltage DV/DT impact on the motor insulation system, extending motor life

span.

Extend the effective distance between motor and inverter and reduce cable

capacitive current, protecting the inverter inside power switch components.

Input AC Choke(Reactor)

Output AC Choke(Reactor)

Output Choke

EM-RAO3-d75

EM-RAI3-1d5

Input Choke

EM-RAI3-d75

EM-RAI3-004

EM-RAI3-7d5

EM-RAI3-015

EM-RAI3-2d2

EM-RAI3-5d5

EM-RAI3-011

EM-RAI3-022

EM-RAI3-132

EM-RAI3-018

EM-RAI3-110

EM-RAI3-037

EM-RAI3-220

EM-RAI3-055

EM-RAI3-280

EM-RAI3-090

EM-RAI3-350

EM-RAI3-030

EM-RAI3-185

EM-RAI3-045

EM-RAI3-250

EM-RAI3-075

EM-RAI3-315

EM-RAI3-500

EM-RAI3-400

EM-RAI3-560

VoltageModel Power Current

(V) (KW) (A)

EM-RAO3-1d5

EM-RAO3-004

EM-RAO3-7d5

EM-RAO3-015

EM-RAO3-2d2

EM-RAO3-5d5

EM-RAO3-011

EM-RAO3-022

EM-RAO3-132

EM-RAO3-018

EM-RAO3-110

EM-RAO3-037

EM-RAO3-220

EM-RAO3-055

EM-RAO3-280

EM-RAO3-090

EM-RAO3-350

EM-RAO3-030

EM-RAO3-185

EM-RAO3-045

EM-RAO3-250

EM-RAO3-075

EM-RAO3-315

EM-RAO3-500

EM-RAO3-400

EM-RAO3-560

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

0.75

1.5

2.2

4

5.5

7.5

11

15

18.5

22

30

37

45

55

75

90

110

132

185

220

250

280

315

350

400

500

560

1.8

2.5

5

10

15

20

30

30

50

60

75

90

120

150

190

250

290

400

440

490

540

600

700

800

1000

1100

50

EM-RAI3-600 EM-RAO3-600 380 600 1250

6 Input & Output AC Choke(Reactor)5 Input & Output AC Filter17 18

Model Specific occasion Min. resistance( )Ω Rated Current(A) Peak Current(A) Match Inverter(KW)

The EM-SWF series sine wave filter adopting trait reactor, having professional filter capacitor and power resistor, reasonable structure, waveform distortion is small, small loss and low noise characteristics, can match with all brands frequency inverter and match many sets of machines, such as wind power, oil field, water and electricity, metallurgy, etc.

To converse SPWM voltage current waveform of frequency inverter to approximate sine wave waveform (For the line load feature, the COS is greater than 0. 3 and T H D is less than 5%).

Protect motor insulation system, reduce bearing current, prolong service life, reduce motor noise.

With general asynchronous motor can replace frequency induction motor use.

Effectively restrain the high frequency loss and RF radiat ion interference, in certain occasions without to use a shielded cable, lowering the field Cable requirements.

Cable between motor and frequency inverter can extend to 500 meters, the longest can reach 3000 meters above.

We have 220 V/380 V/440V/690V /1140V three phase variable frequency drive system.

Suitable motor and inverter power range: 0. 4KW - 1600 KW.

Suitable frequency inverter output carrier frequency range: 1.5 ~16 KHz.

Basic frequency range: 0 to 400 Hz (above 50Hz order must tell us when order).

Driving load forms: asynchronous motor (After special design can use for EPS \UPS and the surrounding power supply system).

Heat resistant level: F grade (for reactor part).

Protection level: IP 20.

EM-BU Dynamic Braking Unit is a high-performance braking product with Canada technology and has been applied extensively to elevator, crane, production machinery, mine hoist, centrifuger and oil pump in oil field, etc. EM-BU Dynamic Braking Unit is able to release the energy regenerated during motor speed regulation by brake resistance so as to produce enough braking torque to ensure normal operation of inverter and other devices.

Model Introduction:

Dc flat wave Choke (reactor) in the circuit is mainly used to improve the quality of power, increase power factor; Our company’s the DC flat wave reactor used high-quality international advanced cold rolled silicon steel sheet , specific volume small, low temperature, noise etc., DC specifications from 2 Amp to 10K Amp, voltage from 220V to 2000V; and we have huge amount inventory, welcome customers to inquire.


Advantage Feature

Reduce the network current waveform distortion rate created by rectifier circuit of capacitance filtering.

To reduce and prevent for rectifier bridge damage and filter capacitor overheat by the pulse current impact in process of filtering capacitor charge and discharge.

Improve grid power factor, reduce total harmonic distortion, improve the quality of power supply of the power.

To improve or inhibit power grid voltage transient fluctuation caused by filter capacitor charging and discharging.

Technical Data

1. Rated working voltage: DC 500V ~ 700V

2. Switch Frequency: 0 ~ 18KHz

3. Motor Frequency: 0 ~ 200Hz

5. Working withstanding voltage: Iron core-coil 3000VAC/50HZ/5MA/60S No arcing breakdown discharge phenomenon(Factory tested).

4.Power: 0.4KW ~ 560KW

DC Choke(Reactor)


DC500~700

EM-RAD3-5d5

EM-RAD3-011

EM-RAD3-015

EM-RAD3-030

EM-RAD3-045

EM-RAD3-075

EM-RAD3-7d5

EM-RAD3-018

EM-RAD3-022

EM-RAD3-037

EM-RAD3-055

EM-RAD3-004

EM-RAD3-110

EM-RAD3-160

EM-RAD3-200

EM-RAD3-090

EM-RAD3-132

EM-RAD3-185

5.5

11

18.5

30

45

75

7.5

15

22

37

55

4

110

160

200

90

132

185

11

20

35

50

80

120

16

30

42

68

100

190

300

400

165

250

350

440

EM-RAD3-2d2

EM-RAD3-1d5

EM-RAD3-d75

2.2

1.5

0.75

6

4.5

2.5

6. Insulation resistance: Iron core-coil 1000VDC is more than 100M.

7. Temperature limit: Core temperature not to exceed 70K (thermometer method), Coil temperature not to exceed 95 k (DC resistance method).

8. Working noise: less than 50DB(horizontal distance 1 meter to DC choke).

Model Information

EM-RAD3-220 220 480

EM-RAD3-250 250 550

EM-RAD3-280 280 600

EM-RAD3-315 315 700

EM-RAD3-355 355 800

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

DC500~700

Inductance(mH) @1KHz

6.3

3.6

1.9

1.08

0.7

0.45

4.4

2.1

1.33

0.8

0.54

0.33

0.22

0.14

0.36

0.26

0.17

0.12

11

15

28

0.10

0.094

0.090

0.074

0.064

EM-RAD3-400 400 900DC500~700 0.057

Sine Wave Filter

Advantage Feature

Brake Unit

Voltage(V) Power(KW) Current(A)

380

EM-SWF3-1d5 1.5

0.75

3.5

2.5

Model

EM-SWF3-d75

EM-SWF3-004

EM-SWF3-7d5

EM-SWF3-015

4

7.5

15

2.2

5.5

11

8.5

17

33

5

11

25

EM-SWF3-2d2

EM-SWF3-5d5

EM-SWF3-011

EM-SWF3-022 22

18.5

45

39EM-SWF3-018

EM-SWF3-037 37

30

75

60EM-SWF3-030

EM-SWF3-055

EM-SWF3-090

EM-SWF3-132

55

90

132

45

75

110

110

190

260

90

150

220

EM-SWF3-045

EM-SWF3-075

EM-SWF3-110

EM-SWF3-220 220

185

400

370EM-SWF3-185

EM-SWF3-280

EM-SWF3-350

EM-SWF3-500

280

350

500

250

315

400

630

500

700

1000

450

560

800

1300

EM-SWF3-250

EM-SWF3-315

EM-SWF3-400

EM-SWF3-630

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

380

EM-BU1

EM-BU3

EM-BU4H

EM-BU3HA

EM-BU2

EM-BU3H

EM-BU5H

EM-BU4HA

EM-BU5HA

Dynamic braking

Dynamic braking

Dynamic braking

With keypad dynamic braking

Dynamic braking

Dynamic braking

Dynamic braking



20

7

3.5

5

15

5

2.5

3.5

2.5

6 33 0.75~18.5

15 100 55~110

50 200 185~220

40 150 132~160

10 50 22~45

40 150 132~160

60 300 250~315

50 200 185~220

60 300 250~315

8 Sine Wave Filter & Brake Unit7 DC Choke(Reactor)19 20

Matched Inverter(KW)

Multi-terminal and multi-resistance,fixed ,adjustable are available ,out wire's length are available following customer requirement, special terminals are available for unusual applications.

Element consisting of a wave-shaped alloy ribbon or non-wave shaped alloy wire.

Good dissipation ,high stability, high power rating, high over load and long life.

Conforms to the ROHS standard and the LEAD-FREE non-lead standard.

Durable, vibration-proof, dissipates heat well and low temperature coefficient with resistance varying in direct proportion.

EMZ series successfully applied for national patent (ZL2004300866567).

Specification: 80W60R, 80W100R, 80W20R, 100W20R, 100W100R, 120W68R, 150W20R, 200W20R, 200W200R, 300W20R, 300W150R, 300W200R, 400W150R, 400W20R, 500W100R, 500W20R, 800W75R 1040W50R, 1040W75R etc.

Conforms to the ROHS standard and the LEAD-FREE non-lead standard.

The product is easy to utilize and install, and suitable for a wide range applications. Applications include industrial machinery, load testing, electric power distribution, instruments, and automated control installations.

DR series is suitable for educational modeling applications, load testing ,industrial machinery, electric power distribution ,instruments , automation control installations ,lift trucks ,overhead cranes, elevators, arc and spot welders ,battery chargers ,machine tools ,conveyors, and UPS systems.

Brake Resistor

Application

Aluminum Resistor

Application

Brake System

Brake Unit

SpecificationsModel

Brake Resistor

QTY(Pcs) Specifications QTY(Pcs)

0.75

1.5

2.2

4

5.5

7.5

11

15

18.5

22

30

37

45

55

75

90

110

132

160

185

200

220

250

280

315

355

400

500

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU1

EM-BU2

EM-BU2

EM-BU2

EM-BU3

EM-BU3

EM-BU3

EM-BU3

EM-BU3H

EM-BU3H

EM-BU4H

EM-BU4H

EM-BU4H

EM-BU5H

EM-BU5H

EM-BU5H

EM-BU4H

EM-BU4H

EM-BU4H

Built-in as standard









Built-in as option

Built-in as option

Built-in as option

Built-in as option

Built-in as option

Built-in as option

External

External

External

External

External

External

External

External

External

External

External

External

External

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

2

2

100W/500Ω

300W/400Ω

500W/250Ω

800W/150Ω

1200W/100Ω

1600W/75Ω

2000W/60Ω

3000W/50Ω

3000W/30Ω

3000W/30Ω

5000W/20Ω

5000W/20Ω

10000W/8Ω

10000W/8Ω

12000W/6.8Ω

12000W/6.8Ω

12000W/6.8Ω

12000W/6.8Ω

12000W/6.8Ω

12000W/6.8Ω

30000W/4Ω

30000W/4Ω

40000W/3Ω

40000W/3Ω

40000W/3Ω

50000W/2.5Ω

70000W/2Ω

70000W/2Ω

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

2

2

2

Cabinet

Cabinet

Cabinet

Cabinet

Cabinet

Cabinet

Cabinet

Cabinet

9 Brake Resistor & Aluminum Resistor 10 Production Process21 22

The goods

Retreat goods

Material purchase

Special mining whether

IQC inspection

Inspectionanomaly

Material warehousing

Qualified

Qualified

Normal

QualifiedYes

Hair outsourcing electronic devices

Outsourcing processing

Three processingPlate parts material

scrapped

Bad

BadBad

Bad

BadNormal

PQC inspection

Yes

No

Yes

NO

Disbursement

FQC inspection

PQC inspectionAging 48 hours

FQC inspectionwarehousing

Normal

The bad

Yes

NoQualified

Qualified

BadNormal

Electronicafter welding

Electronictesting

Plate partsmaintenance

The assembly

11 Application

Stone, brick and wood

Printing/Packaging Machine

Machine tool

Plastics processing / Extrusion processing

Textile industry

Lifting equipment

Fan&Water Pump/Air compressor

Other applications

Industrial washing machine: Many brands supporting, large power washing, high speed dehydration stable.

Centrifuge: Large torque, fast acceleration and deceleration, applicable in harsh environments.

Musical Fountain: Large starting torque, current limit function, do not trip.

Mechanical vibrator: Fast acceleration and deceleration performance, excellent feature for motor forward and reverse control.

(etc.)

Standard inverter cabinet with injection molding signal card.

Energy saving cabinet built in inverter and bypass.

Built in charging function to support mode of contract saving energy.

Extrusion force is big, Avoid tripping, uniform extruding flow.

Quick ly and s t rong fo rce ou tpu t , Mul t ip l e pumps have good synchronization performance.

High energy-saving rate, with conversion of inverter and grid power.

Stable and reliable operation, with mechanical brake to realize halfway stop and start.

Compatible with YASKAWA independent protocol.

Wide operating voltage, low-voltage power shake can work continuously, strong environmental adaptability.

Multi-speed synchronous transmission performance is good; low-speed with large torque has heavy load capacity.

Large lifting torque, energy-saving.

high starting torque, adapt to wide voltage fluctuation.

Airtight structure can avoid air duct blocked, Wobble function.

built in working records and techniques' curve.

Built-in closed loop, realized high precision synchronous.

Fixed-length function.

Realized permanent magnet synchronous motor open loop control.

Support built-in Speed tracking card.

Built -in Pressure closed loop and dormancy awakening, protection function of over pressure.

Built -in extension water supply card, realized one drive for multiple pumps with clock function.

Realized thermostatic control, high Energy-saving rate.

Small volume and high efficiency, frequency inverter and air compressor be used cooperatively.

Operating frequency can be up to 3000 Hz, suitable for drilling machine and carving and milling machine.

Big cutting forces, steady speed and high precision.

Can stable operation at high speed.

Terminal RS485 support 500k communication rate.

Various vector control can be applied to all kinds of machine tools.

Have wire breakage alarm, automatic shutdown, rocker, floating roller once in place.

Super performance of fast acceleration and deceleration, ensure product consistency.

Reciprocating acceleration and deceleration used short time, precise positioning.

High Stability torque control mode makes stable rewinding.

Energy saving, big torque quickly move up and down.

Torque current control uniform cutting and big torque with low speed.

Start and stop quickly, built-in crafts control.

Steady speed with high accuracy and big torque, high yield of production ratio.

23

emheater - prom electric · 2018. 4. 30. · ema~emd series servo motor: emm-60/80 series...

Documents