e-tender document - madhya pradesh skill development …

e-TENDER DOCUMENT

[Type text] Page 0

e-TENDER DOCUMENT

SUPPLY OF MACHINES FOR Global Skills Park –City Campus, Bhopal

Ref No: DSD/GSP-CC/B/2017-18/ 01

Issue Date: 24/02/2018

Last Date of Submission: 20/03/2018

Directorate of Skill Development – Madhya Pradesh

Through – ADB Cell, Govt ITI Campus,

Raisen Road, Govindpura,

Bhopal – 462023 (Madhya Pradesh) India

Ph: +91-755-2581138 |Web: www.mpskills.gov.in | E-Mail: [email protected] Android App: KOUSHALAM | Facebook: Mapskills | Twitter: Map_Skills

e-TENDER DOCUMENT

Supply of Machines for Global Skills Park – City Campus, Bhopal Page 1

Table of Contents 1. Disclaimer ........................................................................................................................................ 2

2. Introduction .................................................................................................................................... 3

3. e-Tender Notice .............................................................................................................................. 4

4. Key Dates and Time ......................................................................................................................... 5

5. e-Tendering Process ........................................................................................................................ 6

6. Rules for Tender (Bid) | Annexure - A ............................................................................................. 9

7. Eligibility Criteria ........................................................................................................................... 13

8. Technical Terms & Conditions ...................................................................................................... 14

8.1. Certificates & Declaration .................................................................................................... 14

8.2. Technical Documentation .................................................................................................... 14

8.3. KIT OF SPARES ..................................................................................................................... 14

8.4. MACHINE ACCEPTANCE AT MANUFACTURE’S SITE .......................................................... 14

8.5. MACHINE INSPECTION & ACCEPTANCE TESTS AT PURCHASER’S SITE: ........................... 15

8.6. TRAINING.............................................................................................................................. 15

8.7. WARRANTY/GUARANTEE .................................................................................................... 15

8.8. ANNUAL MAINTENANCE CONTRACT ................................................................................. 15

9. Scope of Work (SoW) and other Terms and Conditions ............................................................... 16

9.1. SCOPE-OF-WORK ................................................................................................................. 16

9.2. DELIVERY TERMS ................................................................................................................. 16

10. Check List .................................................................................................................................. 17

e-TENDER DOCUMENT


1. Disclaimer

The information contained in this e-Tender Document or subsequently provided to

Applicant(s), whether verbally or in documentary or any other form, by or on behalf of

The Director, Skill Development, Madhya Pradesh (DSDMP) or any of its employees or

advisors, is provided to Applicant(s) on the terms and conditions set out in this e-Tender

Document and such other terms and conditions subject to which such information is

provided.

This e-Tender Document is not an agreement and is neither an offer nor invitation by

DSDMP to the prospective Applicants or any other person.

DSDMP also accepts no liability of any nature whether resulting from negligence or

otherwise howsoever caused arising from reliance of any Applicant upon the statements

contained in this e-Tender Document.

The issue of this e-Tender Document does not imply that DSDMP is bound to select and

shortlist Applicants for next stage or to enter into any technology tie-up agreements

with any Applicant for the Procurement.

e-TENDER DOCUMENT


2. Introduction

DSDMP is the department under The Government of Madhya Pradesh (GoMP)

responsible for The Development of Skill of the Youth for generating Skilled Manpower

to serve the requirement of Industries, Projects, Market at State, National and

International Level.

Global Skills Park (GSP) is a state endeavor conceptualized to support the achievement

of India’s strategic goals of “Make in India” and “Skilling India” through establishing

global standards in skills development and certification. The GoMP is working in close

consultation and cooperation with the Asian Development Bank (ADB) to develop the

technical concept of GSP.

• The Global Skills Park (GSP) would be the new–age state-of-the-art Technical &

Vocational Education & Training (TVET) institution that would seek to

• Create a TVET workforce in MP with high level of employability:

Enable the TVET ecosystem in the state of MP to move into the technology-innovation

space from the current skill based one.

e-TENDER DOCUMENT


3. e-Tender Notice

The Director, Skill Development (ITI) – Madhya Pradesh, Through – ADB Cell –

MPSSDEGB, Govt ITI Campus, Raisen Road, Govindpura, Bhopal – 462023, Madhya

Pradesh (INDIA). Invites online bids (Two bid system) from Manufacturers or their

Authorized dealers for Supply of Machines for Global Skills Park – City Campus, Bhopal

as below:

No Package Code Machine Name QTY

1 Precision Machines

MP001 CNC Lathe Machine 4

MP003 Turnmill Centre (With Y Axis) 2

MP002 CNC Milling Machine 10

MP004 Vertical Machining Center 1

MP005 Vertical Machining Center (5 Axis) 1

MP006 Horizontal Machining Center 1

MP007 EDM Wirecut Machine 2

MP008 Coordinate Measuring Machine 1

MP009 EDM Drill Hole Machine 1

MP010 Turnmill Centre 2

2 Conventional Machine

MC001 Centre Lathe (with Digital Readout) 10

MC002 Universal Milling Machine (with Digital Readout) 5

MC003 Vertical Milling Machine (with Digital Readout) 5

MC004 Surface Grinding Machine (with Digital Readout) 5

MC005 Cylindrical Grinding Machine (with Digital Readout) 2

MC006 Precision Centerless Grinder (with Digital Readout) 2

MC007 Tool & Cutter Grinder 1

MC008 Bench Drill (with DRO & Laser Guide) 2

MC009 Combination Bench Grinder and Belt Sander 4

MC010 Hydraulic Control Hacksaw Machine 2

No Package Bid Document Price Earnest Money Deposit

1 Precision Machines INR 2000 INR 1500000

2 Conventional Machine INR 2000 INR 700000

2. Online bidding go through https://www.mpeproc.gov.in and online e-tenders

are invited as per key dates from Manufacturers or their Authorized for Supply

of Machines for Global Skills Park – City Campus, Bhopal. Tender document and

other details are also available at the websiteshttps://www.mpeproc.gov.in,

www.tender.gov.in and www.mpskills.gov.in

3. In all respect hard copy of the Earnest money must be received at the office of the

undersigned latest by 3:00 PM on 20/03/2018 and will be opened ONLINE

Technical Tender on the same day i.e. 20/03/2018 at 4:00 PM. In the presence of

such tenderer or their authorized representatives as may be present.

4. All corrigendum/ amendments/changes if any will only be issue and made available

only on https://www.mpeproc.gov.in.

Director

Skill Development – Madhya Pradesh

e-TENDER DOCUMENT


4. Key Dates and Time

SN Task Date & Time

1. ONLINE BID DOCUMENT

PURCHASING END DATE 20/03/2018, 12:00 HRS

2. ONLINE CLOSING OF BID 20/03/2018, 14:00 HRS

3. SUBMISSION OF BID (ONLY HARD

COPY OF EMD) 20/03/2018, 15:00 HRS

4. ONLINE OPENING OF TECHNICAL

BID 20/03/2018, 16:00 HRS

5. ONLINE OPENING OF FINANCIAL BID 26/03/2018, 16:00 HRS

Director Skill Development – Madhya Pradesh

e-TENDER DOCUMENT


5. e-Tendering Process

1. Registration of Bidders on e-Procurement System

Manufacturers or their Authorized Dealers for Supply of Machines for Global Skills

Park – City Campus, Bhopal are required to register on the e-Procurement System

on the website https://www.mpeproc.gov.in in order to participate in tenders

processed by Directorate of Skill Development using E-Procurement system of IT

department.

E-tendering Helpdesk at TCS, Bhopal Tel. No.18002588684

2. Digital Certificates

The Bids submitted online should be signed electronically with a Class III Digital

Certificate to establish the identity of the bidder submitting the bid online. The

Bidders may obtain Class III Digital Certificate issued by an approved Certifying

Authority authorized by the Controller of Certifying Authorities, Government of

India. A Class III Digital Certificate is issued upon receipt of mandatory identity

proofs along with an Application Form. Only upon the receipt of the required

documents, a Digital Certificate can be issued. For details please visit

www.ccc.gov.in

Please note that it may take up to 7 working days for issuance of Class III

Digital Certificate, hence the bidders are advised to obtain them at their

earliest.

• The Bidders may obtain more information and the Application Forms

required to be submitted for the issuance of Digital Certificate from

the e-Procurement, IT Department, Arera Hills, and Bhopal.

• E-Tendering Helpdeskat TCS, Bhopal Tel. No.18002588684.

• E-mail :- [email protected]

Important Note

I. Bid for a particular tender can be submitted during the ONLINE BID SUBMISSION

stage only using the Digital Certificate that is used to encrypt the data

during the ONLINE BID PREPARATION.

II. In case, during the process of a particular tender, the bidder loses his Digital

Certificate because of any problem (such as misplacement, virus attack,

hardware problem, operating system problem, etc.); he may not be able to

submit his bid online. Hence, the bidders are advised to keep their Digital

Certificates in a safe place under proper security.

III. The digital certificate issued to the Authorized User of a Partnership firm /

Private Limited Company / Public Limited Company / Joint Venture and used

for online bidding will be considered as equivalent to a no-objection

certificate / power of attorney of that user.

e-TENDER DOCUMENT


IV. In case of Partnership Firm, majority of the Partners have to authorize a

specific individual through Authority Letter signed by majority of the Partners of

the firm.

V. In case of Private Limited Company, Public Limited Company, the Managing

Director / any other Person (having designated authority to authorize a

specific individual) has to authorize a specific individual through Authority

Letter.

VI. Unless the certificate is revoked, it will be assumed to represent adequate

authority of the specific individual to bid on behalf of the Organization for

online tenders as per Information Technology Act, 2000. This Authorized

User will be required to obtain a Digital Certificate. The Digital Signature

executed through the use of Digital Certificate of this Authorized User will be

binding on the firm. It shall be the responsibility of Management/Partners of

the concerned firm to inform the Certifying Authority, if the Authorized User

changes, and apply for a fresh digital certificate for the new Authorized User.

3. Set Up of Bidders' Computer System

In order for a Bidder to operate on the e-Procurement System, the Computer

System of the Bidder is required to be set up for Operating System, Internet

Connectivity, Utilities, Fonts, etc. A help file on setting up of the Computer

System can be obtained from e-Procurement Cell (M/s. TCS Limited, 5th Floor

Corporate Block, DB Mall, Bhopal)

4. Publishing of N.I.T.

For the Tenders processed using the e-Procurement System, only a brief

Advertisement related to the Tender shall be published in the newspapers and

the Detailed Notice and terms and conditions of tender shall be published only on

the e-Procurement System. The bidders can view the Detailed Notice, Terms &

Conditions of tender document and the time schedule for all the Tenders

processed using the e-Procurement System on the website

https://www.mpeproc.gov.in

5. Key Dates and time

The Bidders are strictly advised to follow the time schedule (Key Dates and

time) of the tender for their side of tasks and responsibilities to participate in

the tender, as all the stages of each tender are locked before the start time

and date and after the end time and date for the relevant stage of the tender

as set by the concerned Department Official.

6. Downloading of the Tender Documents

The tender documents can be downloaded online from the website

https://www.mpeproc.gov.in. All the Bidders are required to register on the e-

Procurement System of IT Department of Madhya Pradesh website

https://www.mpeproc.gov.inin order to participate in tender.

https://www.mpeproc.gov.in/

e-TENDER DOCUMENT


7. Payment for registration on E-tendering portal

The registration fee Rs. 500/- + taxes applicable is to be paid ONLINE. And

details of payment are required to email on

[email protected],[email protected], [email protected]

8. Payment of tender document fee

Although the tender document can be downloaded from the website

http://www.mpeproc.gov.in, the bidder has to pay a sum of INR 2000 (Rupees Two

Thousand only) (Non-refundable) towards tender document fee by way of Online.

9. Preparation of Bids and Submission of Online Bids by the Bidders

The Bidders have to prepare their Bids online, encrypt their bid data in the bid

forms and submit documents required to be uploaded related to the tender as per

the time schedule mentioned in the key dates and time as given in the Notice

Inviting Tender after signing of the same by the Digital Signature of their authorized

representative.

10. Submission of Earnest Money Deposit

The manufacturers or their Authorized Dealers shall submit their Earnest Money

Deposit as usual in a physically sealed Earnest Money Deposit envelope and the same

should reach the concerned office as stated in the Notice Inviting Tender and key

dates & time.

Earnest Money should be submitted in the form of Bank Guarantee with validity of 18

Months issued by any Nationalized Bank of India in Favor of Director, Skill

Development, Madhya Pradesh.

The Manufacturers or their Authorized Dealers has to upload scanned copy of

Earnest Money Deposit instrument along with the reference details in the

relevant field during online bidding.

11. Opening of Tender

The concerned Department Official receiving the tender or his duly authorized

person shall open the online.

12. For any further queries, bidders may kindly contact:

• Tel. No. 0755-2571303, Mob. 9826316439 (between 10:30 – 17:30 Hrs on any

working day)

• E-tendering Helpdesk at TCS, Bhopal Tel. No. 18002588684

• E-mail:- [email protected]

13. The tender document is attached as Annexure – A

e-TENDER DOCUMENT


6. Rules for Tender (Bid) | Annexure - A

On-line bids are invited from Manufacturers or their Authorized Dealers for Supply of

Machines for Global Skills Park – City Campus, Bhopal. Bids will be opened at Office of the

Joint Director (ADB Cell), MPSSDEGB Office, Govt. ITI Campus, Bhopal.

A complete set of bidding documents may be purchased by any interested eligible bidder

on the submission of online Tender Fee INR 2000/- (INR Two Thousand only) + Processing

Fee On-line to www.mpeproc.gov.in Bidding document can also be downloaded from

website www.mpskills.gov.in

1. If the bidder is manufacturer then he must submit the relevant certificate of his being the

manufacturer of the items for which he is bidding. Relevant certificate from the

competent authority of the Govt. should be enclosed. In absence of manufacturer

certificate the Tender will be rejected.

2. If the bidder is authorized Dealer then the certificate should be given in Performa as per

Annexure – 1.The manufacturer must authorized only one dealer to participate in Tender.

This Certificate should be duly notarized. In absence of Authorized Dealer Certificate the

Tender will be rejected.

3. The Online tender should contain a covering letter enclosing earnest money, form "A"

receipt of cost of tender form along with other documents as mentioned in various

clauses of the tender. Tender without form "A" duly signed will be rejected. The fact that

the bidder has signed the form "A" (Annexure – 2) will mean that the bidder has

completely accepted these tender rules and that the bidder agrees to abide by these

tender rules. No deviation from tender rules will be accepted under any circumstances

even if the tenderer may mention his own conditions in his tender. The tender rules and

clause usually printed on the parties tenders or bills will not be binding on this

department. If form "A" is signed by bidder in token of his acceptance, he should not

mention any other tender conditions.

The contents of the form "A" should not be changed or amended. In other words, tenders

on stipulated conditions will not be acceptable by this office. It should be noted that

documents should only be uploaded to the portal and no hard copies shall be accepted

related to the tender except the original bank guarantee of earnest money. If the original

hard copy of the bank guarantee of earnest money is not submitted in the office of the

purchaser within the specified time, mentioned in the key dates and time, the tender shall

be rejected at the time of opening the technical bid.

4. The manufacturer must be in the business of manufacturing the same machines since last

5 years & should have manufactured 50 machines per year. The information of the

machines manufactured should be shown in Annexure-9.

5. The bidders quoting as Authorized Dealer of Manufacturers meeting with the above

requirements in full can be considered only if the bidder as Authorized Dealer has

supplied, installed and commissioned satisfactorily at least the same number of machines

being procured through this tender in any one of the last five years (2012-2013 to 2016-

2017). This information should be submitted as Annexure – 10.

e-TENDER DOCUMENT


6. No deviation statement should be submitted for every offer in Annexure – 8. No other

format will be accepted. In absence of No deviation statement, the tender will be

rejected. This information should be submitted as Annexure -8

7. The rates should be quoted in format of price schedule shown in Annexure – 4. Rates

quoted in any other format will be rejected. No insurance charges will be borne by the

consignees under any circumstances.

8. The Manufacturer/Bidder should furnish the information on past supplies and satisfactory

performance in the Proforma given under Annexure – 3. Performance certificate from

purchaser/ user /consignee also must be attached.

9. The Bidder should furnish data to support that he has the financial capacity to perform

the contract, for this the bidder should have the minimum turnover of INR 40 Cr. for

Package – 1 & INR 7 Cr. For package – 2 respectively in any One of the last three financial

years (2014-2015 to 2016-2017). The proof of the same should be attached along with

audited balance sheet to be submitted duly certified by the Chartered Accountant.

10. Tender should be accompanied by Earnest Money of INR 15,00,000/- (INR Fifteen Lac

Only) for Package – 1 and INR 7,00,000/- (INR Seven Lac Only) for Package – 2

respectively in the form of Original Bank Guarantee (valid for a period of 18 Months) in

favor of Director, Directorate of Skill Development, M.P. Earnest Money submitted in any

other form will not be accepted and the tender will be rejected.

11. The bidder must submit the copy of GST registration otherwise the tender will be

rejected.

12. The bidder must submit the latest Tax clearance certificate otherwise the tender will be

rejected.

13. As per Madhya Pradesh Store Purchase Rules clause no. 25.3.1, industries registered as

Micro and Small scale industrial units with the Director of Industries, Government of

Madhya Pradesh only will be exempted from the Tender Fee of INR 2000 (if unit is

producing similar items); however, they should upload a true copy of the certificate for

claiming the above exemption. Firms registered with Central Govt. or with other State

Government are not exempted from the Tender Fee.

14. Security Deposit of 10% of the total value of the order in the form of Bank Guarantee will

have to be deposited by the successful bidder before the final orders are placed with him.

Security Deposit (Bank Guarantee) should be submitted in favor of the Director,

Directorate of Skill Development, M.P. If the demanded Security Deposit of 10% is not

deposited by the bidder in the stipulated time period the Earnest Money deposited with

the tender is liable to be forfeited. Security deposit form is shown in Annexure – 6.

15. Earnest Money/Security Deposit to this office in previous tenders will not be adjusted

towards the present tender and no request will be entertained in this regard.

16. As per Madhya Pradesh Store Purchase Rules clause no. 25.3.2, industries registered as

Micro and Small scale industrial units with the Director of Industries, Government of

Madhya Pradesh, Bhopal only will be exempted from depositing the Earnest money (if

unit is producing similar items); however, they should upload a true copy of the

e-TENDER DOCUMENT


certificate for claiming the above exemption. Firms registered with Central Govt. or with

other State Government are not exempted from depositing Earnest Money.

17. The delivery period should be 90 days from the date of purchase order. The successful

bidder should supply full ordered quantity of items for GSP-CC, Bhopal within the

prescribed delivery period specified in the order. If the bidder faces difficulty in supply of

ordered quantity within the delivery period then he should submit the representation

indicating the appropriate reasons of delay. Power to extend delivery period would

remain with Purchaser. If the delivery period is not extended by the purchaser then the

order pertaining to GSP-CC, Bhopal may be cancelled and the security deposit equivalent

to 10% of the value of order will be forfeited.

18. Bidder should give all relevant particulars about every item, such as maker's name

Country of Manufacture and Specifications and Price etc. Full specification must be

written in tender positively and should also be supported by illustrative pamphlets and all

other relevant literature and catalogues.

19. The bidder will have to submit samples on demand and give demonstration in the

prescribed time limit. In case the samples are not produced in the prescribed time, then it

shall be open to the undersigned to forfeit Earnest Money Deposited by the bidder. If the

samples sent by the party are approved the same and may be adjusted in regular supply

and in the case of rejection, they will be returned back to the party at his cost. The

purchaser shall have the powers to extend the time limits.

20. The undersigned may get the items inspected by the third party/Govt. officers/such

person or persons he deems fit, before supply at site or after supply at the GSP-CC,

Bhopal. The purchaser deserves the right to reject such items which do not come up to

the specification. The decision of the undersigned will be final. The rejected items will be

returned on the bidder's cost.

21. Technical Specifications of the items are shown in Annexure – 12.

22. The quantities shown are approximate and can be altered by the purchaser.

23. The Tender and rates quoted by the bidder will be valid up to 12 months from the date of

opening of the tenders. All orders placed up to this date on the rates quoted will be

binding on bidder. The Security Deposit should have the validity period of 18 months.

24. The items will have to be supplied at Global Skills Park – City Campus, Bhopal, which

would be specified in supply order also. Rates should be quoted F.O.R. destination as

above with complete installation & commissioning along with all accessories, All the

Tools, Cutters, Tool Holder and accessories required for making the specimen test job to

check & verify all machine operations after installation is to be provide by the purchaser

along with raw material for 50 sample pieces.

25. All consignment must be dispatched freight paid to Global Skills Park – City Campus,

Bhopal “To pay" Railway Receipt/Freight Receipts will not be accepted.

26. The undersigned reserves the rights for any changes/cancellation/rejection of any part or

whole tender, without assigning any reason what so ever.

27. Onsite Warrantee/Guarantee of item should be ensured for period of minimum 18

e-TENDER DOCUMENT


Months from the date of delivery or 12 Months from the date of installation &

commissioning, whichever is earlier.

28. Guarantee Certificate: - The Bidder will have to submit the Guarantee certificate of the

item as per Annexure – 5, with the invoice/bill of the item.

29. 90% payment will be released after the safe receipt, as per specifications and installation

& commissioning and demonstration. Remaining 10% of Payment will be made after

successful running of the machine for 6months. Therefore, the invoice should be

prepared separately for 90% and 10% of the cost of the item.

30. Contract agreement form is shown in Annexure – 7.

31. Any bid received by the Purchaser after the deadline for submission of bids prescribed by

the Purchaser, will be rejected.

32. Purchase Committee Approval/Decision will be final and binding.

33. It must be noted that normally all correspondence and transactions will be made only

with the parties whose tenders have been accepted and not with anybody else.

34. The undersigned reserves the right to split up the order for supply of articles at tender

for amongst more than one bidder.

35. Any dispute arising out of this tender or supply of any other matter will fall under the Civil

Jurisdiction of MP High Court Jabalpur only.

36. Earnest Money (Bank Guarantee) deposit form is shown in Annexure – 11.

37. The bidder can bid for one or more items mentioned in different packages, but it is

essential to submit EMD separately package wise. Evaluation would be done item wise.

38. The bidder has to provide one operator for each type of precision machines of Package -

01 (as the case may be) for 6 months at Global Skill Park, City Campus, Bhopal (for

example - for 04 number of CNC lathe machines one person shall be required). This

person should look after the operation & maintenance of the similar type of all machines

being procured. He should handhold the training of the trainers of the department. The

cost of operator should be mentioned in Price Schedule separately. This cost will not be

included in calculating L1.

39. The bidder can bid for one or more item(s) in one/any package, but in any case, should

submit the full EMD separately for that package.

Director

Skill Development Madhya Pradesh

e-TENDER DOCUMENT


7. Eligibility Criteria

SN Clause Annexure

1. Tender specific authorized dealer certificate Annexure – 1

2. Information of the Machines Manufactured,

Tested and supplied

Annexure – 9

3. Information of No. of machines supplied,

installed and commissioned in any one of the

last five years

Annexure – 10

4. Performance Statement Annexure – 3

5. Financial capacity to perform the contract

last three FY

CA Certified Balance Sheets

6. GST registration GST registration Certificate

7. Sales Tax Clearance (latest) Sales Tax Clearance Certificate

Director Skill Development – Madhya Pradesh

e-TENDER DOCUMENT


8. Technical Terms & Conditions

8.1. Certificates & Declaration

Bidders have to submit full details of the machine offered along with the following

information in full

1. Machine layout drawing indicating shop floor space required.

2. Printed catalogue and technical write up of the offered machine, if any shall be

supplied along with the offer.

3. Country of origin certificate.

4. Manufacturer’s machine acceptance test plan of the offered machine shall be

supplied along with the offer.

5. Details of customers including contact details & email ids of the users in precision

manufacturing industries in India to which the similar machines have been

supplied shall be provided along with the offer.

6. Bidder shall provide necessary test certificate wherever standards specified for

conformance

8.2. Technical Documentation

THREE sets of following technical documentation in ENGLISH and TWO soft copies in

CD/DVD shall be supplied along with machine

a. Operator’s manual.

b. Programming manual.

c. Spare parts manual.

d. Maintenance manual for mechanical and electrical systems if any.

e. Foundation drawings if required.

f. Electrical wiring diagrams, PLC diagrams & Machine parameter manual.

g. Preventive maintenance checklist, troubleshooting charts & guidelines

h. Machine test charts

i. Machine assembly drawings indicating part No. if any.

j. Trouble shooting guide with list of error messages and remedies.

8.3. KIT OF SPARES

Kit of spares (Mechanical/electrical/electronic) on two shift basis for maintenance of

the machine for a period of two years operation.

8.4. MACHINE ACCEPTANCE AT MANUFACTURE’S SITE

1. Pre-delivery Inspection (PDI) at manufacturer's work place for machine

acceptance testing as per manufacturer’s acceptance test plan.

2. Actual machine acceptance accuracy test results according to VDI/DGQ 3441

(Statistical Testing of the Operational and Positional Accuracy of Machine Tools;

Basis) standards hall be submitted to purchaser during PDI for providing

clearance.

e-TENDER DOCUMENT


8.5. MACHINE INSPECTION & ACCEPTANCE TESTS AT PURCHASER’S SITE:

1. Purchaser will provide electrical power supply with 415V ± 10%, 50Hz ± 5%, three

phase and neutral, 4-wire system. Supplier shall indicate total capacity in kVA

rating

2. Pneumatic supply will be provided by purchaser if necessary, Supplier to indicate

the pressure and flow requirements.

3. Earthling requirements, if any, shall be projected to Purchaser in advance.

4. Foundation requirements for the machine including drawings shall be

communicated to purchaser well in advance to ready the machine installation site.

5. Erection, Installation and commissioning of supplied machine is under Bidder’s

scope

6. Bidder shall demonstrate/prove all the machine geometrical accuracies for

acceptance of the machine according to manufacturer’s test plan.

7. The final acceptance of the machine shall be based on satisfactory acceptance of

the machine at purchaser’s site.

8.6. TRAINING

Training of 2 purchaser’s persons on operation, programming and machine

maintenance aspects after commissioning and acceptance of machine at purchaser’s

site.

8.7. WARRANTY/GUARANTEE

Entire machine inclusive of essential and optional accessories shall be

warrantied/Guarantied for a period of 18 months from the date of receipt or 12

months from the date of commissioning (whichever is earlier)

8.8. ANNUAL MAINTENANCE CONTRACT

Bidder shall offer Non-Comprehensive Annual Maintenance Contract (AMC) for the

offered machine for 3 years after completion of Warranty. The scope shall cover

maintenance of mechanical, electrical, electronic, pneumatic, hydraulic and control

system for the machine. AMC shall include four preventive maintenance visits in one

year and unlimited number of breakdown calls during the AMC contract period.

e-TENDER DOCUMENT


9. Scope of Work (SoW) and other Terms and Conditions

9.1. SCOPE-OF-WORK

1. Packing, Forwarding, Loading & unloading of machine is under Bidder’s scope.

2. Bidder’s scope includes supply, installation, commissioning & demonstration of

the machine at purchaser’s site at GSP-CC, Bhopal.

3. Assembly / integration tools, instruments etc. required for machine installation,

commissioning and testing of the machine at purchaser site is under Bidder’s

scope.

4. Trainingof2purchaser’spersonsonoperation, programming and machine

maintenance aspects after commissioning of machine at purchaser’s site.

5. The final acceptance of the machine shall be based on satisfactory acceptance of

the machine at purchaser’s site

6. After sales service & spares support shall be provided by the Bidder for a

minimum period of10 years from date of machine acceptance.

7. Speed-Torque / power characteristic shall be provided by Bidder along with the

offer

9.2. DELIVERY TERMS

1. All items ordered shall be supplied before the expiry of delivery period. Any part

shipment without permission shall beat Bidder’s cost.

2. First fill oil/Coolant/Hydraulic Fluid etc. for the machine shall be offered as

standard supply.

3. Seaworthy packing in case of import source/Road worthy packing in case of

indigenous source with proper markings to prevent damage/loss in transit and to

withstand all weather/transit hazards shall be provided.

4. Delivery schedule: Within 3 (THREE) months maximum from the date of P.O.

Release (Bidder shall submit confirmed delivery schedule along with the offer).

e-TENDER DOCUMENT


10. Check List

Tender SPN NO DSD/GSP-CC/B/2017-18/ 01, Dated: Date of Opening

Name of Bidder

Envelope – A

SN Documents Annexure Submitted

Y/N

Page

No

1. Checklist 1

2. EMD in form Bank Guarantee of Nationalized Bank

(valid for 12 months) in Favor of “Director, Skill

Development, Bhopal”

Annexure – 11 2

3. Covering Letter duly signed & stamped on letter

head

3

4. Form – A duly signed & stamped on letter head Annexure – 2 4

5. Self-attested copy Company/Firm Registration

Certificate

6. Self-attested copy of GST Registration

7. Authorization Certificate in case of Authorized

Dealer of a Manufacturer

Annexure – 1

8. Sales Tax clearance certificate (Latest)

9. Declaration for not having been

debarred/blacklisted either by the Tender Inviting

Authority or by any State Government or by

Government of India on INR 100 Judicial Stamp duly

notarized

10. Copies of balance sheet & profit-loss account for

last three FY duly certified by CA

11. Item Wise CE/ISO/ISI/GMP certificate

12. No Deviation Statement

13. Other (Please Specify)

Authorized Signatory

Name & Signature with Seal

Date

FORMAT OF COVERING LETTER

Ref No: …………………………………….. Date: …………………………….

To,

The Director Skill Development, ITI Campus, Govindpura Bhopal-462023

Sub: Submission of Supply of Machines for Global Skills Park – City Campus, Bhopal, Tender SPN

No. DSD/GSP-CC/B/2017-18/ 01

Dear Sir,

As per terms & conditions of the tender following documents are submitted as under:

1. Form “A” Enclosure No. …………………….

2. EMD

Package No

Earnest Money Deposit

BG No Date Issuing Bank

01 INR 1500000

02 INR 700000

3. Other Testimonials …………………

We have quoted rates for items (Number of quoted item to be mentioned) in the Packages as stated

below:

Package No

Total Item in Tender Enquiry

No of Item Quoted

01

02

The entire item is quoted with brand name & full specification. The technical detail as desired is

submitted in prescribed format as per enclosed Annexure



Date

Annexure – 1 (Manufacturer’s Authorization Certificate)


Name of Bidder

MANUFACTURERS' AUTHORIZATION FORM

(For Authorized Dealer)

Ref No: …………………………………….. Date: …………………………….

To,


Dear Sir,

We who are established and reputed manufacturers of(description of goods offered) having

factories at(address of factory) do hereby authorize M/s(Name and address of Authorized Dealer) to

submit a bid, and sign the contract with you for the goods manufactured by us against the Tender

Published by you.

No company or firm or individual other than M/s(Name and address of Authorized

Dealer)are authorized to bid, and conclude the contract for the above goods manufactured by us,

against this specific Tender.

Yours faithfully

(Name & Designation)

(Name of manufacturers)

Note: This letter of authority should be on the letterhead of the manufacturer and should be

signed by a competent person. This AUTHORIZATION FORM should be notarized. It should be

attached in the bid.

Annexure – 2 (Form – A)


Name of Bidder

(FORM – A)

(To be signed and returned along with the tender)

Ref No: …………………………………….. Date: …………………………….

To,



No. DSD/GSP-CC/B/2017-18/ 01

Dear Sir,

I/We

Name of Authorized Signatory

Name of Bidder

Address of Bidder

Phone

e-Mail

Have read the Tender rules for Supply of Machines for Global Skills Park – City Campus, Bhopalas per

Tender notice and I/We accept all rules for Tender.



Date

Annexure – 3 (Performance Statement)

PROFORMA FOR PERFORMANCE STATEMENT

(FOR THE PERIOD OF LAST FIVE YEARS)


Name of Bidder

Name & Address of Purchaser

PO No & Date #

Description & Quantity of

order item as per PO

Order Value

(in Rs)

Date of Delivery as

per PO

Actual Date of Delivery

Reason of delay in delivery (if any)

1 2 3 4 5 6 7

# Attach satisfaction Certificate issued by Purchaser



Date

Annexure – 4 (Price Schedule)


Name of Bidder

PRICE SCHEDULE Package No 01 - Precision Machines

Name of Bidder

SN Item Code

Machine Name

CNC Controller

QTY Country of

Origin Make Model

Machine Price (F.O.R) (including installation &

commissioning) AMC Cost

Total Cost

(11+14)

Per month Cost of one operator for each type of

machine (not to be included in

calculating L1)

Price/Unit (INR)

GST (%)

Total Price/Unit

(INR) GST (%)

Total Grand Total

Price (INR)

GST (%)

Total

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Package No 02 - Conventional Machines

Name of Bidder

SN Item Code

Machine Name QTY Country of

Origin Make Model



Total Cost (10+13)

Price/Unit (INR)

GST (%)

Total Price/Unit

(INR) GST (%)

Total Grand Total

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Annexure – 5 (Guarantee Certificate)


Name of Bidder

GUARANTEE CERTIFICATE

(On the original letter head of the manufacturer)

Ref No: …………………………………….. Date: …………………………….

To,



No. DSD/GSP-CC/B/2017-18/ 01

Ref: YourP.O.NO. ……………… Dated: ……………. placed on our Authorized Dealer

M/s ……………………………………………………………………………………………………………………………………….

Dear Sir,

With reference to the above, this is to certify that the following item has been supplied by

our Authorized Dealer M/s …………………………………………………………………………

SN Item Name & Description QTY

1

2

We further certify that the material supplied as above has been duly pre-inspected by us and have

been found to be in conformity with specification as per the terms & conditions of the supply order.

They are hereby guaranteed for a period of 18 months from the date of receipt or 12 months from

the date of commissioning (whichever is earlier) at GSP-CC, Bhopal; against any material defects,

manufacturing defects (Including assembly installation, commissioning as applicable) and bad

workmanship.

In case of any defect, we guarantee to replace the same immediately without at any cost.

Seal & Signature of Dealer

Seal & Signature of Manufacturer

Annexure –6 (Security Deposit Form)


Name of Bidder

SECURITY DEPOSIT FORM

(Stamp Paper of Bank Guarantee should be purchased by Bank)

Ref No: …………………………………….. Date: …………………………….

To,



No. DSD/GSP-CC/B/2017-18/ 01

Hereinafter called “The Supplier” has undertaken, in pursuance of Contract (issued Purchase

order) No. ………………Dated ……………. 2018 …......................................to supply (Description of Goods)

hereinafter called “The contract.” AND WHEREAS it has been stipulated by you in said contract. That

the supplier shall furnish you with a Bank Guarantee by a recognized bank for the sum specified

there in as security for compliance with the supplier’s performance obligations in accordance with

the contract. AND WHEREAS We have by affirm that we are Guarantors and responsible to you on

behalf of the supplier, up to a total of ( Amount of the Guarantee in Words and Figures ) and we

undertake to pay you , upon Your first written demand declaring the supplier to be in default under

the contract and without cavil or agreement, any sum of sums within the limits of ( Amount of

Guarantee ) aforesaid , without Your needing to prove or to show grounds or reasons for your

demand or the sum specified there in.

This Guarantee is valid until the …………Day of ………………2018.



Annexure –7 (Contract Agreement)


Name of Bidder

FORMAT FOR CONTRACT AGREEMENT

(On the Non-Judicial Stamp)

THIS AGREEMENT made the........... Day of ........................., 20___ between ___________________

_____________________________ (hereinafter "the Purchaser") of the one part and M/s ______

______________________________ (hereinafter called "the Supplier") of the other part:

WHEREAS the Purchaser is desirous that certain Goods and ancillary services viz. Supply of Machines

for Global Skills Park – City Campus, Bhopal in the tender reference DSD/GSP-CC/B/2017-18/ 01,

Bhopal DatedDD/MM/YYYY and has accepted a bid by the Supplier for the supply of those goods and

services for the sum of Rs. ________ /- (Rupees __________________________________ only)

(hereinafter called "the Contract Price").

NOW THIS AGREEMENT WITNESSETH AS FOLLOWS:

1. In this Agreement words and expressions shall have the same meanings as are respectively

assigned to them in the Conditions of Contract referred to, and they shall be deemed to form

and be read and construed as part of this agreement.

2. The following documents shall be deemed to form and be read and construed as part of this

Agreement, viz.:

a) The Letter of Acceptance issued by the purchaser.

b) The Notice Inviting Tender

c) The supplier’s bid including enclosures, annexures, etc.

d) The Terms and Conditions of the Contract

e) The Schedule of Requirement

f) The Technical Specification

g) Any other document listed in the supplier’s bid and replies to queries, clarifications issued by

the purchaser, such confirmations given by the bidder which are acceptable to the purchaser

and the entire Addendum issued as forming part of the contract.

3. In consideration of the payments to be made by the Purchaser to the Supplier as hereinafter

mentioned, the Supplier hereby covenants with the Purchaser to provide, the goods and services

and to remedy defects therein in conformity in all respects with the provisions of the Contract.

4. The purchaser hereby covenants to pay the Supplier in consideration of the provision of the

goods and services and the remedying of defects therein, the Contract Price or such other sum

as may become payable under the provisions of the Contract at the times and in the manner

prescribed by the Contract.

Brief particulars of the goods and services which shall be supplied / provided by the Supplier are as

under.

Package No 01 - Precision Machines

Name of Bidder

SN

Item

Code

Machine

Name

CNC Controll

er

QTY

Country of

Origin

Make

Model



Total Cost

(11+14)

Per month Cost of one operator for

each type of machine

(not to be included in calculating L1)

Price/Unit (INR)

GST

(%)

Total

Price/Unit (INR)

GST

(%)

Total

Grand Total

Price

(INR)

GST

(%)

Total

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Package No 02 - Conventional Machines

Name of Bidder

SN Item Code

Machine Name

QTY Country

of Origin

Make Model



Total Cost

(10+13)

Price/Unit (INR)

GST (%)

Total Price/Unit

(INR) GST (%)

Total Grand Total

1 2 3 4 5 6 7 8 9 10 11 12 13 17

DELIVERY SCHEDULE:

Supply shall complete within 90 days from the date of purchase.

IN WITNESS where of the parties here to have caused this Agreement to be executed in accordance with their respective

laws the day and year first above written.

Signed, Sealed and Delivered by the

Said _____________________________________________ (For the Purchaser)

In the presence of ..........................................

Signature

Name

Address

Witness1.2.

Signed, Sealed and Delivered by the

Said _____________________________________________ (For the Supplier)

in the presence of ..........................................

Signature

Name

Address

Witness1.2.

Annexure –8 (No-Deviation Statements)


Name of Bidder

No Deviation Statements (To be fill in prescribed format only & should be submit Separate Sheet for each Item)

Package Name

Item Code

Machine Name

Controller*

Make

Country of Origin

SN

Spe

c. S

No

Spec mentioned

in Tender

Enquiry

Spec

offered by

the Bidder

Make &

Model

offered by

bidder

Whether there is

deviation from the

tender specification

Yes/No

If Yes, indicate the

deviation & whether

it on +ve side & how

1

2



Annexure –9 (Machine Manufactured by Manufacturer)


Name of Bidder

Information of the Machines Manufactured, Tested and Supplied

SN

Name of the

Machines for

which the bid

is offered

Name of the

manufacturer

Country

name

Machines manufactured during last 5 years

Year No of Machine

1

2



Annexure –10 (Machine Supplied by Authorized Dealer)


Name of Bidder

Information of No. of machines supplied, installed and

commissioned in any one of the last five years

(2012-2013 to 2016-2017)

SN

Name of the

Machines for

which the bid

is offered

Name of the

authorized

dealer

Country

name

No. of machines supplied, installed and

commissioned in any one of the last five years

(2012-2013 to 2016-2017)

1

2



Annexure –11 (EMD Form)


Name of Bidder

EARNEST MONEY (BANK GUARANTEE) DEPOSIT FORM

(The bank guarantee [submitted by Bidder] should be executed on stamp paper in accordance with

stamp Act. The stamp paper should be in the name of executing bank)

Whereas ........................... (Hereinafter called “the Bidder”) has submitted its bid dated

...................... (date of online submission of bid)for the supply of ................................. (Name and/or

description of the goods)(Hereinafter called “the Bid”).

KNOW ALL PEOPLE by these presents that WE ..................... (Name of bank) of .................. (Name of

country), having our registered office at .................. (Address of bank)(Hereinafter called “the

Bank”), are bound unto ............................. (Name of Purchaser) (hereinafter called “the Purchaser”)

in the sum of _______________________ for which payment well and truly to be made to the said

Purchaser, the Bank binds itself, its successors, and assigns by these presents. Sealed with the

Common Seal of the said Bank this ____ day of _________ 20___.

THE CONDITIONS of this obligation are:

I. If the Bidder

1. withdraws its Bid during the period of bid validity specified by the Bidder on Form –

A; or

2. does not accept the correction of errors in accordance with the rules; or

II. If the Bidder, having been notified of the acceptance of its bid by the Purchaser during the

period of bid validity:

1. fails or refuses to execute the Purchase Order / Contract Form if required; or

2. fails or refuses to furnish the security deposit, in accordance with the Tender Rules;

we undertake to pay the Purchaser up to the above amount upon receipt of its first written demand,

without the Purchaser having to substantiate its demand, provided that in its demand the Purchaser

will note that the amount claimed by it is due to it, owing to the occurrence of one or both of the

two conditions, specifying the occurred condition or conditions.

This guarantee will remain in force up to and including forty five (45) days after the period of the bid

validity, and any demand in respect thereof should reach the Bank not later than the above date.

Name of Bank

Seal & Signature of Bank

Technical Specification (Package - 01 - Precision Machines)

Annexure - 12

MP001 | CNC Lathe Machine

SN Parameter Value Unit

Swing Over Bed 450 or higher mmCapacity 1

Swing Over Carriage 330 or higher mmCapacity 2

Admit Between Centre Distance 625 or higher mmCapacity 3

Standard Turning Diameter 320 or higher mmCapacity 4

Max Turning Diameter 340 or higher mmCapacity 5

Interference Free Turning Diameter 250 or higher mmCapacity 6

Max Turning Length Between Centre 600 or higher mmCapacity 7

Max Turning Length With Std Chuck 500 or higher mmCapacity 8

Standard Chuck Size (Hydraulic) 200 or higher mmWork Holding & Tool

Holding

9

Bar Capacity 50 or higher mmWork Holding & Tool

Holding

10

Turret Indexing Mechanisam Hydraulic typeWork Holding & Tool

Holding

11

Turret Indexing Time 0.2 or less SecWork Holding & Tool

Holding

12

Turning Tool Shank Size (B X W) 25 x 25 mmWork Holding & Tool

Holding

13

Number Of Tools 8 or higher NosWork Holding & Tool

Holding

14

Boring Tool Holder Size (Dia) 40 mmWork Holding & Tool

Holding

15

Spindle Nose A2 6 typeSpindle 16

Spindle Bore 60 or higher mmSpindle 17

Spindle Bearing Front / Rear 100 / 90 mmSpindle 18

Spindle Speed 3000 or higher rpmSpindle 19

CNC System FANUC/SIEMENS/Mitsubishi

(Latest Version) Bidder should

quote for each controller

seperately

makeControls And Power 20

Spindle Motor Power Cont / 30 Mins Ratng 7.5/ 11 or higher kWControls And Power 21

Full Power Range ~ 700 - 3000 rpmControls And Power 22

Cross Slide Movement (X Axis) 200 or higher mmTraverse 23

Longitudinal Movement (Z Axis) 625 or higher mmTraverse 24

Rapid Traverse (X Axis) 20 or higher m/minTraverse 25

Rapid Traverse (Z Axis) 20 or higher m/minTraverse 26

Feed Motor 1.5 or higher kWTraverse 27

Cutng Feed Rate 0-10 m/minTraverse 28

Quill Diameter 80 mmTailstock 29

Quill Traverse 100 mmTailstock 30

Base Traverse 400 mmTailstock 31

Quill Taper MT-4 typeTailstock 32

Quill Thrust Force - Max At 15 Bar 500 kgfTailstock 33

Coolant Tank Capacity 125 or higher ltrFluid System 34

Coolant Pump Capacity 100 minimum lpmFluid System 35

Lubricaton Tank Capacity 2.7 minimum ltrFluid System 36

Hydraulic Tank Capacity 40 minimum ltrFluid System 37

Hydraulic Pump Capacity 12 or higher lpmFluid System 38

Hydraulic System Pressure 5 to 35 kg/cm2Fluid System 39

Positoning X / Z 0.005-0.010 mmAccuracy as per ISO

230 - 2

40

01 - Precision Machines | MP001 | CNC Lathe Machine - Page 1 of 2


Annexure - 12

MP001 | CNC Lathe Machine


Repeatability X / Z 0.005-0.010 mmAccuracy as per ISO

230 - 2

41

Programmable Tailstock Quill MT4 typeAccessories 42

Signal Lamp 3 Layers NosAccessories 43

Tool Holder for External/Internal Profling, longitudinal

Turning, Threading, Grooving, Face turning, Partng of,

Boring, Drilling, Face Grooving operaton with 10 inserts

for each tool (ISO Standard) for General Machining with

Holder

2 Set SetAccessories 44

DNC communicaton Provision for data in and out

communicaton, through RS

232 port, USB port, Ethernet

etc. shall be available.

Protecton 45

01 - Precision Machines | MP001 | CNC Lathe Machine - Page 2 of 2


Annexure - 12

MP002 | CNC Milling Machine


Table Size (Clamping Area) (L X W) 900 X 400 (or higher) mm x mmTable 1

T-Slots No. 3 or more NoTable 2

T-Slots Width 14 mmTable 3

T-Slots Center Distance 100 approx mmTable 4

Maximum Load On Table 300 or higher kgTable 5

Distance From Table Top To Spindle Face (Min-Max) min 75-150, Max 450-650 mmTable 6

Longitudinal Movement (X-Axis) 600 or higher mmTraverse 7

Transverse Movement (Y-Axis) 350 or higher mmTraverse 8

Vertcal Movement (Z-Axis) 400 or higher mmTraverse 9

Feed Rates (Infnitely Variable) 1 to 10000 or higher mm/minAxis Drive 10

Rapid Traverse X/ Y/ Z 20/20/20 or higher m/minAxis Drive 11

Power (Cont./ 30 Min. Ratng) 5.5/7.5 or higher kWSpindle 12

Speed (Max) 6000 or higher rpmSpindle 13

Tool Holder Taper BT 40Spindle 14

Spindle Collision Protecton Feature Spindle will not be damaged in

the event of direct/indirect

collision with the workpiece

Spindle 15

Tool change system Twin Arm -Automatc Tool

Changer

16

Tool storage capacity 20 or higher Nos.Automatc Tool

Changer

17

Tool to tool tme 2.5 or less sec.Automatc Tool

Changer

18

Positoning Accuracy 0.01 or beter mmAccuracy as per ISO

230 - 2

19

Repeatability 0.007 or beter mmAccuracy as per ISO

230 - 2

20

Z Axis Protecton Brake on Power Failure Manage Power FailureControls And Power 21

Total Connected Load To be specifed by bidder kVAControls And Power 22




seperately


End Mill Holder 12, 16, 20, 24 mm 2 Each NosAccessories 24

Collet Chuck Holder 5 NosAccessories 25

Face Mill Arbor 16, 22, 27, 32 mm 2 Each NosAccessories 26

Drill Chuck Drills (0 – 13 mm) 5 NosAccessories 27

Tapping Atachment 5 NosAccessories 28

Clamping set 10 NosAccessories 29

Straight Collet for heavy duty chuck holder Diameter

12, 16, 20, 25 MM

2 Each SetAccessories 30

Spring Collet (3 - 25 mm dia) 5 SetAccessories 31

Wrench for heavy duty chuck holder 2 NosAccessories 32

Wrench for small chuck holder 2 NosAccessories 33

Wrench for large chuck holder 2 NosAccessories 34

Pull Stud 40 NosAccessories 35

Fixture for holder 10 NosAccessories 36

Adaptor For MT number 1, MT number 2, MT number 3

taper shank cuters

1 EachAccessories 37

Precision vice 150 mm opening Hydraulic NosAccessories 38

Foundaton kit (leveling elements) 1 NosAccessories 39

Machine tower light (3 ter status lamp) 1 NosAccessories 40

01 - Precision Machines | MP002 | CNC Milling Machine - Page 1 of 2


Annexure - 12

MP002 | CNC Milling Machine


Chip conveyer 1 NosAccessories 41

All moving elements All moving parts/guide

ways/ball screws shall be

protected against dust

incursion by providing suitable

covers / bellows for ease of

service/maintenance.

Protecton 42

Visiport window / Spin window for viewing while

machining

Essental featureProtecton 43

Overall machine guarding Machine shall be provided with

adequate guarding & doors.

Protecton 44

CNC control system cabinet and electrical cabinet Shall be enclosed in a

dust-proof cabin with panel air

conditoning unit.

Protecton 45

Manual Pulse Generator with cable Essental featureProtecton 46





Protecton 47

Ball-screw size Dia 45 or higher mmGuide ways and ball

screws

48

Axes guideway type Boxed guide with turcite. If

Linear guide, the way size must

be 50 mm or more with auto

lubricant system

Guide ways and ball

screws

49

System Integrated centralized

automatc/programmable

lubricaton system

Lubricaton 50

First fll oils The lubricaton system shall be

supplied along with frst fll oils

Lubricaton 51

Programable Coolent System Leak tght tankCoolant system 52

01 - Precision Machines | MP002 | CNC Milling Machine - Page 2 of 2


Annexure - 12

MP003 | Turnmill Centre (With Y Axis)


Swing over bed 500 or higher mmCapacity 1

Chuck dia 200 or higher mmCapacity 2

Max. Turning dia 320 or higher mmCapacity 3

Max. Turning Length 450 or higher mmCapacity 4

Spindle nose A2-6 typeSpindle 5

Hole through spindle 60 mmSpindle 6

Spindle speed 3500 or higher rpmSpindle 7

Spindle motor power(Cont./30 min) 7.5/11 or higher kWSpindle 8

Inclinaton Cross slide 30/45/60 degFeed 9

Travel X-axis 200 or higher mmFeed 10

Travel Y-axis ±50 or higher mmFeed 11

Travel Z-axis 540 or higher mmFeed 12

Rapid traverse rate X / Z axes 20 or higher m/minFeed 13

Rapid traverse rate Y axis 15 m/minFeed 14

No. of statons 12 or higher nos.Live tool Turret 15

Tool shank size 25 x 25 or 20 X 20 mmLive tool Turret 16

Max. Boring bar dia. 32 or higher mmLive tool Turret 17

Turret indexing Servo typeLive tool Turret 18

Turret indexing tme 0.8 or less secLive tool Turret 19

Driven motor power 4.5 or higher kWLive tool Turret 20

Rotary tool speed 3500 or higher rpmLive tool Turret 21

Quill dia 75 mmTailstock 22

Quill stroke 100 mmTailstock 23

Quill taper MT4Tailstock 24




seperately

CNC System 25

Positoning Uncertainty (P) 0.01 or beter mmAccuracy as per ISO

230 - 2

26


230 - 2

27

Programmable Tailstock MT No. 4 1 NosAccessories 28

All the Tools, Cuters, Tool Holder and accessories

required for making the specimen test job as per IS to

be provide along with raw material for 50 sample piece

YesAccessories 29










Protecton 33


machining




Protecton 35



conditoning unit.

Protecton 36

01 - Precision Machines | MP003 | Turnmill Centre (With Y Axis) - Page 1 of 2


Annexure - 12

MP003 | Turnmill Centre (With Y Axis)







Protecton 38


screws

39




lubricant system

Guide ways and ball

screws

40

Tank capacity To be specifed by bidderHydraulic power pack 41

Maximum pressure To be specifed by bidderHydraulic power pack 42



lubricaton system

Lubricaton 43

Type of coolant reservoir Leak tght tankCoolant system 44

Type of coolant Water soluble mineral oil

based coolant.

Coolant system 45

Type of coolant flter Type of coolant flter provided

with ofered machine shall be

suitable for water soluble

mineral oil based coolant.

Coolant system 46

01 - Precision Machines | MP003 | Turnmill Centre (With Y Axis) - Page 2 of 2


Annexure - 12

MP004 | Vertical Machining Center


Longitudinal (X) 700 or higher mmTransverse 1

Transverse (Y) 400 or higher mmTransverse 2

Vertcal (Z) 450 or higher mmTransverse 3

Spindle nose to table top (Min-Max) Min 100-150, Max 600-675 mmTransverse 4

Spindle center to column front 400 or higher mmTransverse 5

Rapid traverse (X) 60 or higher m/minTransverse 6

Rapid traverse (Y) 60 or higher m/minTransverse 7

Rapid traverse (Z) 48 or higher m/minTransverse 8

Feed rate 40 or higher m/minTransverse 9

Power, cont./ 30 min 5.5/ 7.5 kWSpindle 10

Taper HSK63/BT40 typeSpindle 11

Speed 8000 or higher rpmSpindle 12




Spindle 13

Size (L X W) 800 X 400 (or higher) mmTable 14

T-slot (no. x size x pitch) 3 x 14 x 125 (approx) mmTable 15

Safe load on table 300 or higher kgTable 16

Tool changing system Twin armAutomatc Tool

Changer

17

Tool storage capacity 24 or higher No.Automatc Tool

Changer

18

Pull stud 50 NoAutomatc Tool

Changer

19

Positoning A 0.01 or beter mmAccuracy as per ISO

230 - 2

20

Repeatability R 0.007 or beter mmAccuracy as per ISO

230 - 2

21

Compressed air To be specifed by bidder barMachine Installaton

data

22

Power supply 415 V AC, 50 Hz, 3 PhaseMachine Installaton

data

23




seperately





YesAccessories 25

End Mill Holder 16, 20, 24, 30 mm 3 each NosAccessories 26

Collet Chuck 10 NosAccessories 27






12, 16, 20, 25 MM







01 - Precision Machines | MP004 | Vertical Machining Center - Page 1 of 2


Annexure - 12

MP004 | Vertical Machining Center




taper shank cuters


Precision vice 150 mm opening 1 NosAccessories 40




YesAccessories 41










Protecton 45


machining




Protecton 47



conditoning unit.

Protecton 48

Remote Control Machine shall be provided with

remote control unit / Manual

Pulse Generator with cable

Protecton 49





Protecton 50


screws

51




lubricant system

Guide ways and ball

screws

52





lubricaton system

Lubricaton 55



Lubricaton 56



based coolant.

Coolant system 58

Dimension (W * D* H) To be specifed by bidderCoolant system 59

Capacity To be specifed by bidderCoolant system 60

Max fow rate To be specifed by bidderCoolant system 61





Coolant system 62

01 - Precision Machines | MP004 | Vertical Machining Center - Page 2 of 2


Annexure - 12

MP005 | Vertical Machining Center (5 Axis)


Table size ø 400 or higher mmTable 1

Maximum safe load on table (At least) 200 or higher kgTable 2

Distance From Table Top To Spindle Face (Min-Max) Min 50-125, Max 550-600 or

higher

mmTable 3

X Axis 600 or higher mmTraverse 4

Y Axis 500 or higher mmTraverse 5

Z Axis 400 or higher mmTraverse 6

A axis -120°+30° or higher degreeTraverse 7

C axis 360° simultaneous degreeTraverse 8

Feed Rate (X) 20 or higher m/minAxis drive 9

Feed Rate (Y) 20 or higher m/minAxis drive 10

Feed Rate (Z) 20 or higher m/minAxis drive 11

Rapid Feed Rate (X) 30 or higher m/minAxis drive 12

Rapid Feed Rate (Y) 30 or higher m/minAxis drive 13

Rapid Feed Rate (Z) 30 or higher m/minAxis drive 14

A axis 16 rpmAxis drive 15

C axis 60 rpmAxis drive 16

Acceleraton 0.5 m/s²Axis drive 17

Rotary table 360 contnuos degAxis drive 18

Taper HSK63/BT40 typeSpindle 19

Power (Cont./ 30 Min. Ratng) 7.5/11 kWSpindle 20

Speed 12000 or higher RPMSpindle 21




Spindle 22

Number of tools 24 or higher NoAutomatc Tool

Changer

23

Positoning A (Linear axes) 0.007 or beter mmAccuracy as per ISO

230 - 2

24

Repeatability R (Linear axes) 0.005 or beter mmAccuracy as per ISO

230 - 2

25

Positoning A (A axis - Tiltng) 20 or beter arc secAccuracy as per ISO

230 - 2

26

Repeatability R (A axis - Tiltng) 15 or beter arc secAccuracy as per ISO

230 - 2

27

Positoning A (C axis - Rotary Table) 15 or beter arc secAccuracy as per ISO

230 - 2

28

Repeatability R (C axis - Rotary Table) 10 or beter arc secAccuracy as per ISO

230 - 2

29

Total connected load To be specifed by bidder kVAInstallaton Data 30

Compressed air To be specifed by bidder barInstallaton Data 31

Power supply 415 V ± 10 % AC, 50 ± 2 % Hz, 3

phase

Controls And Power 32

Automatc Chip Conveyor YesAutomatc Chip

Conveyor

33




seperately





YesAccessories 35

01 - Precision Machines | MP005 | Vertical Machining Center (5 Axis) - Page 1 of 3


Annexure - 12





Face Mill Arbor 16, 22, 27, 32 mm 5 each NosAccessories 38





12, 16, 20, 25 MM

5 each SetAccessories 42








taper shank cuters






YesAccessories 51










Protecton 55


machining




Protecton 57



conditoning unit.

Protecton 58




Protecton 59





Protecton 60


screws

61




lubricant system

Guide ways and ball

screws

62



lubricaton system

Lubricaton 63



Annexure - 12





Lubricaton 64



based coolant.

Coolant system 66





Coolant system 67



Annexure - 12

MP006 | Horizontal Machining Center


Spindle taper HSK63/BT40 typeSpindle 1

Power (Cont./ 30 Min. Ratng) 15/18.5 or beter kWSpindle 2

Maximum spindle torque S3/ cont 124 / 50 or higher NmSpindle 3

Spindle speed (Aprox) 14000 or higher rpmSpindle 4

Spindle acceleraton tme 2.5 or beter secSpindle 5

Spindle bearing diameter 70 mmSpindle 6

Traverse X/Y/Z 650 x 650 x 650 or higher mmAxes 7

Rapid traverse X/Y/Z 20 or higher m/minAxes 8

Maximum acceleraton 0.7 gAxes 9

Table top to spindle centre 100 - 750 mmAxes 10

Table center to spindle face 100 - 750 mmAxes 11

Pallet size 500 x 500 or higher mmIndex Table 12

Pallet type Tapped holes typeIndex Table 13

Load capacity 500 or higher kgIndex Table 14

Maximum job swing (diameter x height) approx 700 x 850 or higher mmIndex Table 15

Pallet height from ground level (Approx) 1100 or higher mmIndex Table 16

Direct drive rotary table 360 x 0.001° degIndex Table 17

Number of tools 30 or higher Nos.Automatc Tool

Changer

18

Linear axes - Positoning A - with encoder (with linear

scale opton)

0.01 or beter mmAccuracy as per ISO

230 - 2

19

Linear axes - Repeatability R - with encoder (with linear

scale opton)

0.007 or beter mmAccuracy as per ISO

230 - 2

20

Rotary axes - Positoning A 10 or beter arc sec.Accuracy as per ISO

230 - 2

21

Rotary axes - Positoning A 7 or beter arc sec.Accuracy as per ISO

230 - 2

22

Type - servo driven 180 swing type TypePallet Changer 23

No of Pallet 2 NosPallet Changer 24

Pallet change tme (avg load) 9 or less secPallet Changer 25

Compressed air To be specifed by bidder barControls And Power 26

Total connected load - cont / 30 min To be specifed by bidder kVAControls And Power 27




seperately


Automatc Chip Conveyor YesAutomatc Chip

Conveyor

29




YesAccessories 30








12, 16, 20, 25 MM





01 - Precision Machines | MP006 | Horizontal Machining Center - Page 1 of 3


Annexure - 12







taper shank cuters






YesAccessories 46










Protecton 50


machining




Protecton 52



conditoning unit.

Protecton 53




Protecton 54





Protecton 55


screws

56




lubricant system

Guide ways and ball

screws

57





lubricaton system

Lubricaton 60



Lubricaton 61



based coolant.

Coolant system 63

Dimension (W * D* H) To be specifed by bidderCoolant system 64

Capacity To be specifed by bidderCoolant system 65

Max fow rate To be specifed by bidderCoolant system 66



Annexure - 12







Coolant system 67



Annexure - 12

MP007 | EDM Wirecut Machine


Travel (X/Y/Z) 400 / 300 / 220 or higher mmMachine 1

Submerged Type YesMachine 2

Travel (U/V) 120 / 120 or higher mmMachine 3

Taper angle (workpiece height) (Min +/- 15) 15 / 200 30 / 87 °/mmMachine 4

Min workpiece dimensions (W x D x H) 600 x 500 x 200 or higher mmMachine 5

Min workpiece weight 500 or higher kGMachine 6

Table dimensions (W x D) 640 x 540 or higher mmMachine 7

Table layout Hardened 4-side tableMachine 8

Possible wire diameters 0.01 – 0.30 mmMachine 9

Wire spool capacity 10 minimum kGMachine 10

Automatc wire threader/Wire chopper YesMachine 11

Mains voltage 3-phase 400 V/AC ± 10%,

50/60 Hz, 20 kVA

Machine 12

Tank capacity as per work piece dimension LiterFilter system 13

Filter partcle size 3.0/2 µm/Filter

elements

Filter system 14

Temperature control Dielectric cooling unitFilter system 15

Power supply unit Regeneratve transistor pulse

type

Generator 16

Cooling method Fully sealed/indirect air coolingGenerator 17

Max . output current 50 AGenerator 18

Input method Keyboard, USB fash drive,

Ethernet

Control 19

TFT colour monitor/Control system 15" touchscreen/CNC, closed

circuit

Control 20

Min . command step (X/Y/Z/U/V) 0.1 or beter µmControl 21

Min . axis resoluton 0.05 or beter µmControl 22

Optcal drive system with linear scales (X/Y/U/V) YesAccessories 23

Three-sided elevatng work tank YesAccessories 24

Wire staton 20 kg YesAccessories 25

Digital AE II generator/fne fnishing unit YesAccessories 26

Digital fne fnishing generator (SD-FS) YesAccessories 27

Corehold Technology YesAccessories 28

Wire Guide 0.01, 0.2, 0.25, 0.3 mm Precision Round,

Pico Grade

5 eachAccessories 29

Angle Master Advance II YesAccessories 30

Ethernet/DNC/FTP/Ant-virus protecton/Sleep mode YesAccessories 31

External signal output YesAccessories 32

Tricolour status lamp YesAccessories 33

ERGO-LUX YesAccessories 34

Easy 3D-Setup Sofware YesAccessories 35

Renishaw probe on sleeve YesAccessories 36

Automatc dielectric water reflling YesAccessories 37

Connecton to external cooling system YesAccessories 38

Additonal axes/rotatonal axis YesAccessories 39

Tool package/automaton solutons YesAccessories 40

Fix Base B 4 NosTooling Clamping and

Work Holding

41

Clamping Head B-100 2 NosTooling Clamping and

Work Holding

42

01 - Precision Machines | MP007 | EDM Wirecut Machine - Page 1 of 2


Annexure - 12

MP007 | EDM Wirecut Machine


Clamping Head B-45R 2 NosTooling Clamping and

Work Holding

43

Clamping Head B-45L 2 NosTooling Clamping and

Work Holding

44


Work Holding

45


Work Holding

46

Zero Vise B-100-15 2 NosTooling Clamping and

Work Holding

47

Sufcient quantty for 1 year 24 NosEnergizing plate 48

1.2mm 6 NosJet Nozzle 49

Yes 5 NosThermal cuter 50

Sufcient for 1 year 32 NosDielectric Fluid Filter 51

Sufcient for 1 year 5 NosJet Filter 52

(5-liter each) for 6 month 8 NosDe-ionizing resin 53

Yes 5 NosI-roller 54

H axes 20 NosFelt pad 55

I axes 20 NosFelt pad 56

B axes 20 NosFelt pad 57

Front 20 NosFelt pad 58

Rear 20 NosFelt pad 59

upper 10 NosNozzle 60

lower 10 NosNozzle 61

0.1 mm (3 kG each Spool) 6 NosWire 62




long 6 NosV-guide 66

short 6 NosV-guide 67

01 - Precision Machines | MP007 | EDM Wirecut Machine - Page 2 of 2


Annexure - 12

MP008 | Coordinate Measuring Machine


X-axis 600 or higher mmMeasuring Range 1

Y-axis 600 or higher mmMeasuring Range 2

Z-axis 400 or higher mmMeasuring Range 3

Resoluton 0.0001 mmResoluton 4

Guide Method Air bearing on each axisTechnical Data 5

Maximum Drive Speed 3D 519 mm/sTechnical Data 6

Maximum Acceleraton 3D 2300 mm/s2Technical Data 7

18-22°C 1.7+3L/1000 µmAccuracy as per ISO

10360

8

16-26°C 1.7+4L/1000 µmAccuracy as per ISO

10360

9

MPETHP/MPTTHP 2.3µm / 50 secondsAccuracy as per ISO

10360

10

PFTU, MPE 1.7 µmAccuracy as per ISO

10360

11

Material GraniteWork Table 12

Size 640 X 1150 mm x mmWork Table 13

Tapped Insert M8 x 1.25mmWork Table 14

Max. Workpiece Height 545 mmWork Table 15

Max. Workpiece Weight 180 kGWork Table 16

CNC CNCSystem 17

Comprising of controller, Drives card, counter card and

associated electronics

YesEvaluaton Unit 18

Internatonally accepted geometric measuring sofware

with latest version.

YesSofware 19

Single page window icon based bidirectonal interactve

sofware

YesSofware 20

Complete with learn and repeat programming YesSofware 21

Features of the sofware YesSofware 22

Online or ofine programming YesSofware 23

Part program Editor YesSofware 24

Can be re-run afer the power failure YesSofware 25

Geometric Elements such as point, line, cone, plane,

circle, sphere, cylinder

YesSofware 26

Relatons: Distances, Angles, Intersectons YesSofware 27

ISO concentricity, Squaureness, Parallelism (Forms and

Positon)

YesSofware 28

Probe Management YesSofware 29

2D Digitsing YesSofware 30

Data Storage for statstcal analysis YesSofware 31

Flexible record structure YesSofware 32

Translaton, Rotaton of part reference YesSofware 33

On line help with graphical presentaton of all measured

optons

YesSofware 34

Reinshaw MH8 probe head with interface TP2 5-W

Touch Trigger probe Style- 18 pieces

PreferedProbing System 35

All in One with Table YesComputer System 36

01 - Precision Machines | MP008 | Coordinate Measuring Machine - Page 1 of 1


Annexure - 12

MP009 | EDM Drill Hole Machine


Work Table Size (WxD) 500 x 400 at least mmTechnical Data 1

X/Y axes Travel 400 x 300 at least mmTechnical Data 2

Z axis Travel 400 at least mmTechnical Data 3

W axis Travel 400 at least mmTechnical Data 4

Electrode size Ø0.1 ~ Ø3.0 mmAccessories 5

Auto Electrode Changer 8 NosTechnical Data 6

Maxi. Electrode length 450 at least mmTechnical Data 7

Maxi. Workpiece height 400 at least mmTechnical Data 8

Maxi. Workpiece weight 500 at least kgTechnical Data 9

Machine weight 1200 at least kgTechnical Data 10

Input Power 4 or beter KVATechnical Data 11

Dielectric Fluid 25 at least LiterAccessories 12

01 - Precision Machines | MP009 | EDM Drill Hole Machine - Page 1 of 1


Annexure - 12

MP010 | Turnmill Centre


Swing over bed 500 or higher mmCapacity 1

Chuck dia 200 or higher mmCapacity 2

Max. Turning dia 320 or higher mmCapacity 3

Max. Turning Length 500 or higher mmCapacity 4

Admit Between Centre Distance 600 or higher mmCapacity 5

Spindle nose A2-6 typeSpindle 6

Hole through spindle 60 mmSpindle 7

Spindle speed 3500 or higher rpmSpindle 8

Spindle motor power (Cont./30 min) 7.5/11 or higher kWSpindle 9

Travel X-axis 200 or higher mmFeed 10

Travel Z-axis 600 or higher mmFeed 11

Rapid traverse rate X / Z axes 30 or higher m/minFeed 12

No. of statons 12 or higher nos.Turret 13

Tool shank size 25 x 25 or 20 X 20 mmTurret 14

Max. Boring bar dia. 32 or higher mmTurret 15

Turret indexing Servo typeTurret 16

Resoluton of C Axis 0.001 or beter degreeRotary 17

Driven motor power 4.5 or higher kWRotary 18

Rotary tool speed 3500 or higher rpmRotary 19

Quill dia 75 mmTailstock 20

Quill stroke 100 mmTailstock 21

Quill taper MT4Tailstock 22




seperately

CNC System 23

Positoning Uncertainty (P) 0.01 or beter mmAccuracy as per ISO

230 - 2

24


230 - 2

25

Programmable Tailstock MT No. 4 1 NosAccessories 26




YesAccessories 27










Protecton 31


machining




Protecton 33



conditoning unit.

Protecton 34


01 - Precision Machines | MP010 | Turnmill Centre - Page 1 of 2


Annexure - 12

MP010 | Turnmill Centre






Protecton 36


screws

37




lubricant system

Guide ways and ball

screws

38



lubricaton system

Lubricaton 39



based coolant.

Coolant system 41





Coolant system 42

01 - Precision Machines | MP010 | Turnmill Centre - Page 2 of 2

Technical Specification (Package - 02 - Conventional Machines)

Annexure - 12

MC001 | Centre Lathe (with Digital Readout)


Lathe Machine Confrming To IS 6893-1988part 1 YesStandards 1

Lathe Machine Confrming To IS 210 :1993 YesStandards 2

2 Axis Digital Readout YesDisplay Control 3

Distance Between Centres 1500 mmTravel Range 4

Swing Over Bed 450 or higher mmTravel Range 5

Center Height 325 or higher mmTravel Range 6

Swing Over Cross Slide 400 or higher mmTravel Range 7

Swing Over Carriage Wing 400 or higher mmTravel Range 8

Swing In Gap 800 or higher mmTravel Range 9

Width Of Gap In Front 100 or higher mmTravel Range 10

Type Of Bed Gap Straight type or beterTravel Range 11

Length Of Bed 2700 or higher mmTravel Range 12

Width Of Bed 400 or higher mmTravel Range 13

Maximum Feed Force 3000 or beter NSpindle 14

Maximum Facing Diameter 600 or higher mmSpindle 15

Maximum Weight Of Workpiece That Can Be Held

Between Chuck And Supported By Live Centre

200 or higher kGSpindle 16

Maximum Weight Of Workpiece That Can Be Held

Between Chuck And Supported By Dead Centre

300 or higher kGSpindle 17

Torque, Maximum On Spindle 6 minimum NMSpindle 18

Type Of Spindle METRICSpindle 19

Size Of Spindle 165 mmSpindle 20

Type Of Spindle Nose A2 8Spindle 21

Taper Bore In Spindle As Per IS 2582-1972 MT-6Spindle 22

Taper Bore In Spindle Sleeve As Per IS1715-1986 MT-4 typeSpindle 23

Bore In Spindle 80 mmSpindle 24

No. Of Spindle Speed In Forward Directon 18 or higherSpindle 25

No. Of Spindle Speed In Reverse Directon 18 or higherSpindle 26

Spindle Speed Range In Forward Directon 40-2000 rpmSpindle 27

Spindle Speed Range In Reverse Directon 40-2000 rpmSpindle 28

Type Of Chuck 3 Jaw Self CenteredWork Holding & Tool

Holding

29

Chuck Dia 200 or higher mmWork Holding & Tool

Holding

30

Travel Of Cross Slide 300 or higher mmWork Holding & Tool

Holding

31

Travel Of Top Slide 150 or higher mmWork Holding & Tool

Holding

32

Type Of Tool Holder For Way Square (Quick Change)Work Holding & Tool

Holding

33

Tool Shank Size As Per IS 1983:1958 25 X 25 mmWork Holding & Tool

Holding

34

Tail Stock Sleeve Diameter 60 mmWork Holding & Tool

Holding

35

Tail Stock Spindle Taper As Per IS 1715:1986 MT-4 typeWork Holding & Tool

Holding

36

Maximum Ofset Of Tailstock On Either Side Of Center

Line

10 mmWork Holding & Tool

Holding

37

Sleeve Travel Type (Tail Stock) ManualWork Holding & Tool

Holding

38

Travel Of Sleeve 200 mmWork Holding & Tool

Holding

39

02 - Conventional Machines | MC001 | Centre Lathe (with Digital Readout) - Page 1 of 3


Annexure - 12



Lead Screw Diameter 35 mmLead Screw 40

Lead Screw Pitch 6 mmLead Screw 41

Lead Screw Feed Range (Longitudnal) 0.04-2.24 or higher mm/minLead Screw 42

Lead Screw Feed Range (Cross In Mm/min) 0.02-1.12 or higher mm/minLead Screw 43

Metric Thread Range 0.5-28 or higher mmLead Screw 44

Britsh Thread Range 56-1 TPILead Screw 45

Module Of Thread 0.25-14 or higher mmLead Screw 46

Diameteral Pitch 112-2 TPILead Screw 47

Coolant Pump Output As Per IS 2161 :1962 0.1 or beter kWMachine Data 48

Coolant Pump Speed 2800 minimum rpmMachine Data 49

Coolant Pump Discharge At Maximum Working Height

As Per IS 2161 :1962

35-40 or beter lpmMachine Data 50

Type Of Lubricaton OIL BATHMachine Data 51

Length Of Lathe Machine ~3000 not more than mmMachine Data 52

Width Of Lathe Machine ~1000 not more than mmMachine Data 53

Height Of Lathe Machine ~1300 mmMachine Data 54

Weight Of Lathe Machine With Electrical And Standards

Accessories

~1500 kGMachine Data 55

Noise Emited By Machine As Per IS 10998:1984 85 or less dBMachine Data 56

Mechanical Guarding As Per IS 9474 :1980 YesMachine Data 57

In Possession Of Technical Evaluaton Report As Per IS

:11118

YesMachine Data 58

Lead Screw -Ground Profle & Pitch Accuracy 0.03 Mm

Over A Length Of 300 Mm

YesMachine Data 59

Machine Confrming Full Power Cutng Load Test To Full

Length Turning Capacity Of Machine

YesMachine Data 60

Lubricaton System Requirement As Per IS:11118 YesMachine Data 61

Cooling System Requirement As Per IS :11118 YesMachine Data 62

Positoning Accuracy Meets The Minimum Requirement

As Per IS:1878 For Cumulatve Error

YesMachine Data 63


As Per IS:1878 For Repeatbility

YesMachine Data 64


As Per IS:1878 For Backlash

YesMachine Data 65


As Per IS:1878 For Minimum Possible Requirement

YesMachine Data 66

Geometric Accuracy Test Of General Purpose Parallel

Lathe Machines As Per IS 1878-1971

YesMachine Data 67

Geometric Accuracy Test Of Precision Lathe Machines

As Per IS 6040-1972

YesMachine Data 68

Machine Bed & Tail Stock Castng Grade Confrming To

FG-260 With Hardness 180-230BHN As Per IS

11118-1997, Head stock botom “V” and Flat are

scraped to give proper seatng of 20 to 24 Points per 25

x 25 mm square with respect to Bed “V” and fat.

Alignme

YesMachine Data 69

Tailstock Sleeve Case Hardening Steel 15Ni7Cr4M02,

Hardened And Ground To A Hardness Of 58-62 HRCas

Per IS 1118-1997

YesMachine Data 70

Head Stock Drive Gears Confrming To Alloy Steel

Material Specifcaton 15 Ni 7 Cr 4 M02, Hardened

58-62 HRC And Profle Ground With 0.8 Micron Surface

Roughness Ra Value

YesMachine Data 71



Annexure - 12



Main Spindle Confrming To C2R Grade Forged Steel

And Hardened 58-62 HRC. / Ground With 0.8 Micron

Surface Roughness Ra Value

YesMachine Data 72

Main Spindle Bearing Confrming Pre-loaded

GAMET/TIMKEN Make Spindle Bearing High Precision

Class Double Row Taper Roller Bearings At Front &

Single Row Taper Roller Bearing At Back

YesMachine Data 73

Machine Confrming Dynamically Balanced Spindle And

Other Parts Rotatng With Peripheral Speed Of More

Than 3m/sec

YesMachine Data 74

Electric Equipment I.e. Motor And Control Gear Suitable

For Operaton On 415 V, 3 Phase, 50 Hz., 4 Wire,

A.C.supply With Suitable Ammeter "

YesMachine Data 75

DRIVING PLATE WITH PEG 1 NosMachine Data 76

Coolant Equipment & Swarf Tray 1 NosMachine Data 77

SPLASH GUARD 1 NosMachine Data 78

SPINDLE REDUCTION SLEEVE 1 NosMachine Data 79

60 Deg.DEAD CENTRE 2 NosMachine Data 80

Rotatng Center 1 NosMachine Data 81

QUICK CHANGE TOOL POST WITH TOOL HOLDERS 1 NosMachine Data 82

QUICK INDEXIBLE SQUARE TOOL POST 1 NosMachine Data 83

Chuck Gurad YesMachine Data 84

Rear Tool Post YesMachine Data 85

Universal Face Plate YesMachine Data 86

Precision Face Plate YesMachine Data 87

Steady Rest YesMachine Data 88

Follow Rest YesMachine Data 89

Taper Turning Atachment YesMachine Data 90

Change Gear For DP Threads 1 SetMachine Data 91

Machine Lamp YesMachine Data 92

Swraf Tray Complete With Coolant Equipment YesMachine Data 93

Four Jaw Chuck (Self Centering & Independent) 1 Each NosMachine Data 94

Warranty 1 YearsMachine Data 95

Availability Of Test Report From Central

Govt./NABL/ILAC Acredited Lab To Prove Confrmity To

Specifcaton

RequiredMachine Data 96

Main Motor Power 7.5 or higher kWMachine Data 97



Annexure - 12

MC002 | Universal Milling Machine (with Digital Readout)


Overall size (Length) 1300 or higher mmTable 1

Overall size (Width) 300 or higher mmTable 2

Clamping area (Length) 1000 or higher mmTable 3

Clamping area (Width) 230 or higher mmTable 4

T-slot (Nos), width 3, 14 nos./ mmTable 5

Swivel range of table to both sides 45 degTable 6

Maximum safe load on table 300 or higher kgTable 7

Automatc 700 or higher mmLongitudinal

movement

8

Manual 700 or higher mmLongitudinal

movement

9

Automatc 250 or higher mmTransverse

movement

10

Manual 270 or higher mmTransverse

movement

11

Automatc 400 or higher mmVertcal movement 12

Manual 400 or higher mmVertcal movement 13

Quill stroke, manual 70 or higher mmSpindle 14

Milling spindle front bearing Ø 85 or higher mmSpindle 15

Spindle taper 40 ISO/BTSpindle 16

Vertcal milling head swivelling on both sides 45 degSpindle 17

Speed range 45 - 2000 or higher rpmSpindle 18

Nos./progression 12/ 1.4Spindle 19

Nos. of feed 18 Nos.Feed 20

Longitudinal 16 - 800 or higher mm/minFeed range

(progression 1.25)

21

Transverse 16 - 800 or higher mm/minFeed range

(progression 1.25)

22

Vertcal 4 - 200 mm/minFeed range

(progression 1.25)

23

Longitudinal 2500 or higher mm/minRapid traverse 24

Transverse 2500 or higher mm/minRapid traverse 25

Vertcal 600 or higher mm/minRapid traverse 26

Milling spindle motor 5.5 or higher kWControls And Power 27

Digital Read Out System 0-setng of the component,

bolthole circle rogramming,

and geometric/trigonometric

functons


Feed motor 0.75 or higher kWControls And Power 29

Electricals Equipment YesAccessories 30

Coolant Equipment YesAccessories 31

Control Panel DigitalAccessories 32

Universal Milling Head YesAccessories 33

Vertcal Atachment YesAccessories 34

Slotng Atachment YesAccessories 35

Universal Dividing Head with suitable atachment YesAccessories 36

Rack Cutng Atachment YesAccessories 37

Vice Swivel Base, Tilt & Swivel Base - 200 mm 1 Each NosAccessories 38

Rotary Milling Table Dia 300 mm, Indexable

Graduated in 1 degree

Accessories 39

Stub Milling Arbor - 16, 22, 27, 32 mm 1 Each NosAccessories 40

02 - Conventional Machines | MC002 | Universal Milling Machine (with Digital Readout) - Page 1 of 2


Annexure - 12

MC002 | Universal Milling Machine (with Digital Readout)


Collet Chuck 2Accessories 41

Conical Type Collet for chuck holders - 5, 6, 8, 12, 16

mm in step of 1 mm

2 setAccessories 42

Drill chuck - up to 8 mm & up to 12 mm 1 EachAccessories 43

Wrench for chuck holder 1Accessories 44

Splash Guard 1Accessories 45

02 - Conventional Machines | MC002 | Universal Milling Machine (with Digital Readout) - Page 2 of 2


Annexure - 12

MC003 | Vertical Milling Machine (with Digital Readout)


Overall size (Length) 1300 or higher mmTable 1

Overall size (Width) 300 or higher mmTable 2

Clamping area (Length) 1000 or higher mmTable 3

Clamping area (Width) 230 or higher mmTable 4

T-slot (Nos), width 3, 14 nos./ mmTable 5

Swivel range of table to both sides NA degTable 6

Maximum safe load on table 400 or higher kgTable 7

Automatc 700 or higher mmLongitudinal

movement

8

Manual 700 or higher mmLongitudinal

movement

9

Automatc 350 or higher mmTransverse

movement

10

Manual 375 or higher mmTransverse

movement

11

Automatc 400 or higher mmVertcal movement 12

Manual 500 or higher mmVertcal movement 13

Quill stroke, manual 70 or higher mmSpindle 14

Milling spindle front bearing Ø 85 or higher mmSpindle 15

Spindle taper 40 ISO/BTSpindle 16

Vertcal milling head swivelling on both sides 45 degSpindle 17

Speed range 45 - 2000 or higher rpmSpindle 18

Nos./ progression 12/ 1.4Spindle 19

Nos. of feed 18 Nos.Feed 20

Longitudinal 16 - 800 or higher mm/minFeed range

(progression 1.25)

21

Transverse 16 - 800 or higher mm/minFeed range

(progression 1.25)

22

Vertcal 4-200 mm/minFeed range

(progression 1.25)

23

Longitudinal 2500 or higher mm/minRapid traverse 24

Transverse 2500 or higher mm/minRapid traverse 25

Vertcal 600 or higher mm/minRapid traverse 26

Milling spindle motor 5.5 or higher kWControls And Power 27

Digital Read Out System 0-setng of the component,

bolthole circle rogramming,

and geometric/trigonometric

functons


Feed motor 0.75 or higher kWControls And Power 29

Electricals Equipment YesAccessories 30

Coolant Equipment YesAccessories 31

Control Panel DigitalAccessories 32

Slotng Atachment YesAccessories 33

Vertcal Dividing Head with suitable atachment YesAccessories 34

Rack Cutng Atachment YesAccessories 35

Vice Swivel Base, Tilt & Swivel Base - 200 mm 1 Each NosAccessories 36

Rotary Milling Table Dia 300 mm, Indexable

Graduated in 1 degree

Accessories 37

Stub Milling Arbor - 16, 22, 27, 32 mm 2 Each NosAccessories 38

Collet Chuck 2Accessories 39

Conical Type Collet for chuck holders - 5, 6, 8, 12, 16

mm in step of 1 mm

2 SetAccessories 40

02 - Conventional Machines | MC003 | Vertical Milling Machine (with Digital Readout) - Page 1 of 2


Annexure - 12

MC003 | Vertical Milling Machine (with Digital Readout)


Drill chuck - up to 8 mm & up to 12 mm 1 EachAccessories 41

Wrench for chuck holder 1Accessories 42

Splash Guard 1Accessories 43

02 - Conventional Machines | MC003 | Vertical Milling Machine (with Digital Readout) - Page 2 of 2


Annexure - 12

MC004 | Surface Grinding Machine (with Digital Readout)


Table Size (L× W) 480 × 200 or higher mmWorking table 1

Max movement of working table (L× W) Hydraulic

Operated, Table should run on LM guideways ,ball

screws, with servo motors & MPG ( Manual pulse

generator )

530 × 220 or higher mmWorking table 2

T -Slot (number×width) 1×14 mmWorking table 3

Max distance from spindle center to table surface 440 or higher mmGrinding head 4

Wheel Size (OD X Width X Bore) φ200×20×Φ31.75 mmGrinding head 5

Wheel speed 2850 or higher rpmGrinding head 6

Vertcal Travel of Wheel Head 120 or higher mmGrinding head 7

Longitudinal speed of working table (3 - 20) or higher m/minFeed amount 8

Cross feed of working table - Contnuously

(Variable Transmission)

150 or higher mm/minFeed amount 9

Cross feed of working table - Intermitently

(Variable Transmission)

0-5 or higher mm/tmesFeed amount 10

Cross feed of working table -

Per revoluton on handwheel

2.5 or higher mmFeed amount 11

Cross feed of working table -

Per graduaton on handwheel

0.02 or higher mmFeed amount 12

Vertcal feed on handwheel - Per revoluton 1.25 mmFeed amount 13

Vertcal feed on handwheel - Per graduaton (Servo mpg

feed)

0.001 mmFeed amount 14

Spindle motor 1.5 or higher kWMotor power 15

Coolant pump motor 0.8 or higher kWMotor power 16

Working pressure 20 Kg/cm2Hydraulic System 17

Power of Hyd. Pump Motor 2 HPHydraulic System 18

Tank capacity 75 or higher literHydraulic System 19

Hydraulic oil Servo 68 100 supplied with machine literHydraulic System 20

Wheel head should moves up and down on a column

on V and fat guide ways via lead screw and nut. Vertcal

feed hand wheel should have a least count of 0.002

mm. Vertcal movement of the spindle head set to

accuracy of 0.02 mm in entre length. Column sho

RequiredWorking precision 21

The parallelism of working surface to base level (300:0.005) or beter mmWorking precision 22

Surface roughness Ra0.40 or beter μmWorking precision 23

Minimum of Numberical display 0.005 mmDisplay Control 24

Precision statc wheel balancing unit with mandrel YesStandard Accessories 25

Microfeed on cross mechanism YesStandard Accessories 26

Microfeed on vertcal mechanism YesStandard Accessories 27

Coolant system with magnetc separator YesStandard Accessories 28

Lightng equipment with low volt transformer YesStandard Accessories 29

Magnetc Table 300 X 150 or higher mmStandard Accessories 30

Wheel Dressing atachment with diamond point dresser

0.5 carat

YesStandard Accessories 31

Precision vice 100 mm opening YesStandard Accessories 32

Grinding Wheel Silicon Carbide 2 nosStandard Accessories 33

Grinding Wheel Aluminium Oxide 2 NosStandard Accessories 34

02 - Conventional Machines | MC004 | Surface Grinding Machine (with Digital Readout) - Page 1 of 1


Annexure - 12

MC005 | Cylindrical Grinding Machine (with Digital Readout)


Admit Between Centers 450 or higher mmTraverse 1

Max. Grinding Length 400 or higher mmTraverse 2

Centre Height 175 or higher mmTraverse 3

Swing Diameter 300 or higher mmTraverse 4

Table Width 300 or higher mmTable 5

Swivel Of Table ± 8 Deg.Table 6

Table Speed Inf .Variable--Hydraulically 50-4000 mm/minTable 7

Dwell At Reversal 0-60 secTable 8

Manual Table Movement Least Count 0.02 mmTable 9

Grinding Wheel Size (Dxwxb) 350 x 40 x 127 mmGrinding Wheel Head 10

Wheel Speed 2100 or higher rpmGrinding Wheel Head 11

Wheel Cutng Speed/Surface Speed 33 m/secGrinding Wheel Head 12

Grinding Wheel Head Bearing Precision Angular Contact

Bearing or (Hydrodynamic

White Metal Bearing)

Grinding Wheel Head 13

Grinding Wheel Head Slide (Infeed Slide) YesGrinding Wheel Head 14

Infeed Slide Width 315 mmGrinding Wheel Head 15

Rapid Approach/Retracton 50 mmGrinding Wheel Head 16

Swivel ± 45 Deg. Toward both side

calibrated on body

Deg.Grinding Wheel Head 17

Infeed With Hand Wheel 1 mmGrinding Wheel Head 18

Min. Incremental Feed On Diameter 0.005 mmGrinding Wheel Head 19

Automatc Grinding Infeed Depth 0.1 - 0.9 mmGrinding Wheel Head 20

Automatc Infeed Rate 0.1 - 1 mm/minGrinding Wheel Head 21

Infeed Mechanism Feed Screw Nut with Hydraulic

Rotary Cylinder

Grinding Wheel Head 22

No. Of Speeds 4 or higher NosWork Head 23

Speed Range 55 - 325 rpmWork Head 24

Swivel ± 90 Deg. With calibrated on

Body

Work Head 25

Spindle Nose Taper MT-3 or beterWork Head 26

Centre MT-3 or beterTailstock (Lever Type

Spring Loaded)

27

Quill Dia. 35 mmTailstock (Lever Type

Spring Loaded)

28

Quill Travel 20 mmTailstock (Lever Type

Spring Loaded)

29

Max.Weight Of Job Between Centres 50 KgTailstock (Lever Type

Spring Loaded)

30

Wheel Head 5 hp-1440 rpm

(Crompton/ABB/Siemens) or

higher

HPMotor Power 31

Work Head 1 hp-1440 rpm


higher

HPMotor Power 32

Hydraulic Power Pack 1 hp-1440 rpm


higher

HPMotor Power 33

Coolant Pump 0.1 hp-1400 rpm


higher

Motor Power 34

02 - Conventional Machines | MC005 | Cylindrical Grinding Machine (with Digital Readout) - Page 1 of 4


Annexure - 12



Spindle 60 x 250 mmInternal Grinding

Atachment

35

Spindle Speed 18000 or higher rpmInternal Grinding

Atachment

36

Min. And Max. Bore Ground 15 to 100 or higher mmInternal Grinding

Atachment

37

Depth 70 or higher mmInternal Grinding

Atachment

38

Min.And Max. Dia.Of Wheel Ф10 to Ф40 mm by 5 mm 03

each

Internal Grinding

Atachment

39

Quill Working Length 65, 70 & 90 mmInternal Grinding

Atachment

40

Quill Dia. (Body Dia. X Working Length) Ф13 x 70L, Ф14 x30L, Ф18x80L,

Ф25x30L

Internal Grinding

Atachment

41

Set of Std.Wheel Flanges With Balancing Blocks &

Grinding Wheel

YesAccessories 42

Wheel Balancing Mandrel YesAccessories 43

Wheel Balancing Stand—(4 Wheeled) YesAccessories 44

Two Carbide Tipped Centres MT-3 YesAccessories 45

Extractor For Grinding Wheel YesAccessories 46

Wheel Radius Dressing Atachment YesAccessories 47

Revolving Centre MT-3 YesAccessories 48

Set of V Belts & Flat Belts—2 Each YesAccessories 49

Two Point Steady Rest YesAccessories 50

Three Jaw Chuck 100Mm YesAccessories 51

Set of Service Tools YesAccessories 52

Set of Collets 6 To 20Mm By 2 Mm YesAccessories 53

Adaptor Sleeve & Draw Bar For Collets YesAccessories 54

Set of Drivers YesAccessories 55

Machine Lamp YesAccessories 56

Splash Guards For Internal Grinding Belt And Chuck YesAccessories 57

Test Bar YesAccessories 58

The required voltage stabilizer and matching isolaton

transformer if recommended by supplier, should be

part of ofer

YesAccessories 59

Suitable lubricaton system to be provided YesAccessories 60




YesAccessories 61

The machine shall be supplied with complete

equipment ready for the connecton to the power main

YesAccessories 62

Table Movement Should Have Hydraulically As Well As

Manually

YesFeature 63

Cartridge type grinding wheel spindle with precision

angular contact bearing duly packed with grease and

suitable for 45 m/s cutng speed

YesFeature 64

Assembly drawing of each sub -assemblies with

indicaton of each components with their specifcaton,

part number and make

5 SetDocuments &

Manual

65

The basic machine shall have a robust and vibraton

free constructon and high power ratng to ensure

accurate grinding of job

YesFeature 66



Annexure - 12



Hydraulic, lubricaton coolant circuit diagram with

descripton of each element having their specifcaton,

make and part number

5 SetDocuments &

Manual

67

Assembly drawing of each sub -assemblies with

indicaton of each components with their specifcaton,

part number and make

5 SetDocuments &

Manual

68

Complete electrical circuit drg., including service

manual of A.C. drive, if any

5 SetDocuments &

Manual

69

Hydraulic, lubricaton coolant circuit diagram with

descripton of each element having their specifcaton,

make and part number

5 SetDocuments &

Manual

70

Detailed schematc diagram of the proposed machine

to be submited along with the ofer

5 SetDocuments &

Manual

71

Complete electrical circuit drg., including service

manual of A.C. drive, if any

5 SetDocuments &

Manual

72

Compliance with all safety norms must be followed 5 SetDocuments &

Manual

73

Detailed schematc diagram of the proposed machine

to be submited along with the ofer

5 SetDocuments &

Manual

74

Documents for operaton, maintenance and service

manuals for machine and other equipment to be

provided in English language only out of which 1st set

to be sent along with ofer

5 SetDocuments &

Manual

75

Compliance with all safety norms must be followed 5 SetDocuments &

Manual

76

Juncton box & connecton details. 5 SetDocuments &

Manual

77

Documents for operaton, maintenance and service

manuals for machine and other equipment to be

provided in English language only out of which 1st set

to be sent along with ofer

5 SetDocuments &

Manual

78

PLC user program (Hardcopy) with comments in English. 5 SetDocuments &

Manual

79

Electrical schematc. 5 SetDocuments &

Manual

80

Wiring diagram. 5 SetDocuments &

Manual

81

Interface & commissioning manual of drive controller 5 SetDocuments &

Manual

82

O & M manual of machine 5 SetDocuments &

Manual

83

Juncton box & connecton details. 5 SetDocuments &

Manual

84

PLC user program (Hardcopy) with comments in English. 5 SetDocuments &

Manual

85

Interface & commissioning manual of drive controller 5 SetDocuments &

Manual

86

O & M manual of machine 5 SetDocuments &

Manual

87

PLC programming manual 5 SetDocuments &

Manual

88

Each type of following things used in hydraulic,

lubricaton and coolant system of machine

1 Each NosSpares 89



Annexure - 12



a- Pumps, b- Pressure relief, pressure reducing, fow

control and directon control valves c- Pressure

switches, fow switches and level switches, d- Ten nos.

regeneratve type flter elements and twenty nos.

disposable type flter elements

1 Each NosSpares 90

Set of rubber hose pipes with and connectons i.e. each

type of pipe having same numbers used in hydraulic,

lubricaton and coolant system of machine

1 Each NosSpares 91

Set of seal-kits of diferent hydraulic cylinders used in

machine

1 Each NosSpares 92

Set of spindle bearings / bushes used in machine 1 Each NosSpares 93

Internal Grinding Wheel 6 diferent dia eachSpares 94

Grinding Wheel Silicon Carbide 2 NosSpares 95

Grinding Wheel Aluminium Oxide 2 NosSpares 96

Complete set of belts including tming belts used in

machine

1 Each NosSpares 97



Annexure - 12

MC006 | Precision Centerless Grinder (with Digital Readout)


Diameter (Min) 1 or less mmGrinding Capacity 1

Diameter (Max) 75 or higher mmGrinding Capacity 2

Diameter 350 mmGrinding Wheel 3

Width 100 at least mmGrinding Wheel 4

Bore 150 or less mmGrinding Wheel 5

Speed (Min) 1750 or less rpmGrinding Wheel 6

Speed (Max) 2000 or higher rpmGrinding Wheel 7

Diameter 225 mmRegulatng Wheel 8

Width 100 mmRegulatng Wheel 9

Bore 76 mmRegulatng Wheel 10

Speed 18 or higher rpmRegulatng Wheel 11

Speed (Med) 40 rpmRegulatng Wheel 12

Speed (Max) 100 rpmRegulatng Wheel 13

Tiltng Angle 5°/-2° DegRegulatng Wheel 14

Swivelling Angle ±1° DegRegulatng Wheel 15

Grinding Wheel Motor 5.5 or higher kWPower Requirements 16

Regulatng Wheel Motor 1 or higher kWPower Requirements 17

Coolant Pump Motor 0.1 or higher kWPower Requirements 18

Hydraulic Motor 0.05 or higher kWPower Requirements 19

Magnetc Separator 0.25 or higher kWPower Requirements 20

Grinding wheel with fange YesAccessories 21

Regulatng wheel with fange YesAccessories 22

Coolant pump with tank YesAccessories 23

Hydraulic tank with pump YesAccessories 24

Work rest blade for through feed grinding YesAccessories 25

Hand pump lubricaton for slides YesAccessories 26

Machine lamp YesAccessories 27

Splash guards YesAccessories 28

A.C. drive for regulatng wheel head YesAccessories 29

Instructon manual YesAccessories 30

Tool kit YesAccessories 31

Micro feed fne adjustment for depth of cut YesAccessories 32

Template truing slides for profle dressing YesAccessories 33

Hydrodynamic bush bearing for GW head YesAccessories 34

Bush bearing for RW head YesAccessories 35

Motorized centralized lubricaton for slides YesAccessories 36

Fully enclosed splash guards YesAccessories 37

A.C. drive for grinding wheel head YesAccessories 38

Wheel balancing stand with arbor YesAccessories 39

Magnetc coolant separator YesAccessories 40

Paper cum magnetc coolant separator YesAccessories 41

Ant vibraton pads YesAccessories 42

Hydraulic oil cooler YesAccessories 43

Profle templates YesAccessories 44

Vibratory bowl feeder YesAccessories 45

Bar feeder for long bar grinding YesAccessories 46

Auto infeed grinding with hydraulic cylinder YesAccessories 47

Auto ejector for infeed grinding hydraulic YesAccessories 48

Auto ejector for infeed grinding pneumatc YesAccessories 49

Auto lifer for infeed grinsing YesAccessories 50

02 - Conventional Machines | MC006 | Precision Centerless Grinder (with Digital Readout) - Page 1 of 2


Annexure - 12

MC006 | Precision Centerless Grinder (with Digital Readout)


Auto loading atachment for infeed YesAccessories 51

Automatc feeder for through feed grinding YesAccessories 52

Automatc balancing for grinding wheel YesAccessories 53

Through-feed & in-feed grinding YesFeature 54

Microfeed-fne adjustment for depth of cut YesFeature 55

Minor taper adjustment without dressing YesFeature 56

Template truing devices fted with linear slides YesFeature 57

Grinding wheel & regulatng wheel head fted with

precision roller/hydrodynamic bearings

YesFeature 58

Regulatng wheel variable speed drive YesFeature 59

Separate motorized lubricaton system for grinding

wheel head with safety foat switch

YesFeature 60

Precision ball screw for depth of cut YesFeature 61

Dressing slides hardened ground and protected with

way wipers

YesFeature 62

Grinding wheel duly balanced and easy to load and

unload

YesFeature 63

Apart from above, machines are compact, rigid and

stable in design

YesFeature 64

02 - Conventional Machines | MC006 | Precision Centerless Grinder (with Digital Readout) - Page 2 of 2


Annexure - 12

MC007 | Tool & Cutter Grinder


Swing Over Table Dia 280 or higher mmTraverse 1

Distance between Centre 700 or higher mmTraverse 2

Distance between work Head & Right Hand Tail stock 600 or higher mmTraverse 3

Longitudinal Traverse 500 mmTable 4

Table 200 or higher mmTable 5

Dimensions 900 X 140 or higher mmTable 6

Swivel In Either Side Of Column With Centre Locking 45 DegTable 7

Tee Slots Width 12 mmTable 8

Vertcal Adjustment (Manual) 280 or higher mmWheel Head 9

Vertcal Adjustment (Power) 250 or higher mmWheel Head 10

Max. Vertcal Distance of Grinding spindle Above Centre

Axis

225 mmWheel Head 11

Max. Vertcal Distance Of Grinding spindle below Centre

Axis

30 mmWheel Head 12

Swivel Of The Wheel Spindle In Horizontal Plane 360º DegWheel Head 13

Swivel Of The Wheel Spindle In Vertcal Plane ±180º DegWheel Head 14

Wheel Spindle Speed In Either Directon 3800 or higher rpmWheel Head 15

Motor 0.75 or higher kWPower Requirements 16

Wheel Head Motor 0.5 or higher kWPower Requirements 17

Coolant Motor 0.15 kWPower Requirements 18

Universal cuter head with MT – 3 adopter sleeves 1 NosAccessories 19

Right hand, quick actng spring loaded center tail stock 1 NosAccessories 20

Lef hand center tail stock 1 NosAccessories 21

Diamond holder 1 NosAccessories 22

Plain tooth rest and extension with one blade 1 NosAccessories 23

Universal tooth rest and extension with one blade 1 NosAccessories 24

Center height guage 1 NosAccessories 25

Center with morse taper no 3 1 NosAccessories 26

Wheel guards with guard holder 5 NosAccessories 27

Grinding wheels 5 NosAccessories 28

All necessary spanners and wrenches Yes NosAccessories 29

Suitable electrical Yes NosAccessories 30

Maintenance and instructon manual 5 SetAccessories 31

Center height guage 1 NosAccessories 32

Center with morse taper no 3 1 NosAccessories 33

Wheel guards with guards with guard holder 5 NosAccessories 34

Grinding wheels 5 NosAccessories 35

Cylindrical external grinding atachment Yes NosAccessories 36

Cylindrical internal grinding atachment Yes NosAccessories 37

Swivel Vice, Two way swivel vice, Universal 3 – way

swivel vice

1 Each NosAccessories 38

Face, milling cuter grinding atachment 1 NosAccessories 39

Radius grinding atachments 1 NosAccessories 40

Long reamer grinding atachment 1 NosAccessories 41

Gear milling cuter grinding atachment 1 NosAccessories 42

Angular wheel dressing atachment 1 NosAccessories 43

Radius dressing atachment 1 NosAccessories 44

Hob grinding atachment 1 NosAccessories 45

Dust exhaustng unit 1 NosAccessories 46

Statc wheel balancing unit 1 NosAccessories 47

02 - Conventional Machines | MC007 | Tool & Cutter Grinder - Page 1 of 2


Annexure - 12

MC007 | Tool & Cutter Grinder


Collapsible bellows for column 1 NosAccessories 48

Collect atachment & collets 1 NosAccessories 49

4” self centering chuck 1 NosAccessories 50

Positve indexing atachment 1 NosAccessories 51

Extension price for internal grinding spindle 1 NosAccessories 52

Cuter arbors 1 NosAccessories 53

Wheel fanges 1 NosAccessories 54

Dressing diamond 1 NosAccessories 55

Machine lamp with transformers 1 NosAccessories 56

02 - Conventional Machines | MC007 | Tool & Cutter Grinder - Page 2 of 2


Annexure - 12

MC008 | Bench Drill (with DRO & Laser Guide)


Power input 710 WatTechnical Data 1

Laser type 650 nm, <1 mWTechnical Data 2

Laser class 2Technical Data 3

Drilling diameter in steel 13 or higher mmTechnical Data 4

Drilling diameter in wood 40 or higher mmTechnical Data 5

Chuck jaw width 1.5 - 13 or higher mmTechnical Data 6

Drill stroke 90 mmTechnical Data 7

No-load speed (1st gear / 2nd gear) 200 – 850 / 600 – 2.500 rpmTechnical Data 8

Laser drilling guide YesFeature 9

Integrated work light YesFeature 10

Speed to be variably adjusted using the rotary knob YesFeature 11

Digital display to easy reading of the exact drilling depth YesFeature 12

Keyless precision chuck YesFeature 13

Integrated laser to assist with drilling: for easy, precise

drilling – at exactly the required positon

YesFeature 14

Round workpieces can be fxed conveniently using the

quick-acton clamp – for an absolutely precise drilling

result

YesFeature 15

Parallel guide and the large work plate to accurate and

safe positoning of the workpiece

YesFeature 16

02 - Conventional Machines | MC008 | Bench Drill (with DRO & Laser Guide) - Page 1 of 1


Annexure - 12

MC009 | Combination Bench Grinder and Belt Sander


Wheel Dia 250 mmTechnical Data 1

Wheel Width 40 mmTechnical Data 2

Motor 1.5 kWTechnical Data 3

Speed 2850Technical Data 4

Size (Approx) 650 x 380 x 380 mmTechnical Data 5

Tool rests YesAccessories 6

Floor stand 1 NosAccessories 7

Eye shield 2 NosAccessories 8

Quick-release wheel cover YesAccessories 9

Aluminum oxide grinding wheel (One fted, 1 Spare) 2 NosAccessories 10

Aluminum oxide sanding belt (One fted, 1 Spare) 2 NosAccessories 11

Lamp housing uses vibraton-resistant LED Light for

illuminaton

YesAccessories 12

Coolent Tray YesAccessories 13

Sturdy cast iron base with rubber mounts YesFeature 14

Accepts coton bufng and wire brush wheels YesFeature 15

Fully guarded YesFeature 16

02 - Conventional Machines | MC009 | Combination Bench Grinder and Belt Sander - Page 1 of 1


Annexure - 12

MC010 | Hydraulic Control Hacksaw Machine


Diameter 300 or higher mmCapacity 1

Square 250 or higher mmCapacity 2

Stroke length 250 or higher mmCutng Length 3

No. of speed strokes 3 or higher NosCutng Length 4

Range of speed strokes (per minute) 70-80 mmCutng Length 5

Blade Size 450 x 40 x 2.25 mmCutng Length 6

Power of main motor 2 or higher kWPower 7

Power of coolant motor 0.1 or higher kWPower 8

Feed SawPower 9

controlled hydraulically mmAccessories 10

Ten blades of HSS size minimum @ 450 x 40 x 2.25Accessories 11

Hydraulic Oil NosAccessories 12

DOL StarterAccessories 13

Suitable coolant atachment, pipe ftngs with tankAccessories 14

Safety atachment mounted on machine for holding

round / square jobs, preventng from going to bed /

machine & hitng the bevel gears, afer cutng is done

NosAccessories 15

V Belt NosAccessories 16

02 - Conventional Machines | MC010 | Hydraulic Control Hacksaw Machine - Page 1 of 1