6000dual USB portable battery charger

Congratulations on purchasing the Ventevpowercell 6000. Your new powercellcomes precharged and ready to use rightout of the box!

Your new powercell 6000 is capable ofcharging a variety of tablets, mobile devices,including Apple products, mobile phones,smartphones, Bluetooth® devices, musicplayers, GPS systems, and more. Please readthe information in this manual carefully toensure optimum performance of yournew powercell 6000.

Discover all of Ventev’s mobile power solutionsonline at ventev.com/mobile.

©2015

Manufactured by Ventev®

Charging via Wall or Car Charger

a. Attach device to the powercell with USB cable

b. Press and hold on/off button to activate battery function

visit ventev.com/warranty for details

REV. 10/158-HN-40112-1-2

6000dual USB portable battery charger

5V, 2A(10W)Universal USB output 1: 5V, 2.4A(12W)Universal USB output 2: 5V, 1A(5W)Capacity: 6000mAh@3.7V (22.2Wh)Size: 101 x 56 x 21.5

To check battery level, press/tap power button.

2.4A Rapid Charge Output (12W)

1A Output (5W)

1. With nodevices attached,charge the

forminimum 3 hrs

2. Press and holdthe on/off buttonto reset.

2A Rapid Charge Input (10W)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. This Class B device complieswith Canadian ICES-3(B)/NMB-3(B).

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipmentdoes cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.