Download - ON-LINE CONTROLS. HYPACK SURVEY Key Commands: Key combo:Action Control – SStart Line Control – EEnd…
ON-LINE CONTROLSON-LINE CONTROLS
HYPACK SURVEY Key Commands:
Key combo: ActionControl – S Start Line
Control – E End Line
Control – W Switch Line Direction
Control – I Increment to Next Line
Control - D Decrement to Previous Line
With these five keyboard commands, you are now a HYPACK SURVEY expert! Feel free to skip the rest of this tedious presentation.
Selecting A Planned LineSelecting A Planned Line
Current active planned line is red (default) with arrows.
MethodMethod Action/ResultAction/ResultKeyboard: CTRL-IKeyboard: CTRL-I Increments to the next line.Increments to the next line.
Keyboard: CTRL-DKeyboard: CTRL-D Decrements to the previous line.Decrements to the previous line.
Mouse: Right-click on Line Mouse: Right-click on Line HandleHandle
Allows user to select line.Allows user to select line.
Mouse: Toolbar IconsMouse: Toolbar Icons Increment/Decrement LineIncrement/Decrement Line
Menu: Options - Navigation Menu: Options - Navigation ParametersParameters
Enter line name or numberEnter line name or number
AVI
Line Direction: Line Direction: What direction do we want to go?What direction do we want to go?
Default Line Direction Mode set under ‘Options- Navigation Parameters’:
Closest point…Origin point…Terminus point…Alternate point
MethodMethod Action/ResultAction/ResultKeyboard: CTRL-WKeyboard: CTRL-W Flips the direction of the lineFlips the direction of the line
Mouse: Right-click on Line Mouse: Right-click on Line Handle. Click on ‘Swap’.Handle. Click on ‘Swap’.
Flips the direction of the lineFlips the direction of the line
Menu: Line - SwapMenu: Line - Swap Flips the direction of the lineFlips the direction of the line
Mouse: Toolbar IconMouse: Toolbar Icon Flips the direction of the lineFlips the direction of the line
AVI
Start Line: Start Line: Start the Recording of DataStart the Recording of Data
Logging of data only occurs when you are ‘On Line’.Logging of data only occurs when you are ‘On Line’.Check the ‘Status’ in the Data Display after you start each line to verify Check the ‘Status’ in the Data Display after you start each line to verify
you are ‘Logging’.you are ‘Logging’.
MethodMethod Action/ResultAction/ResultKeyboard: CTRL-SKeyboard: CTRL-S Start LineStart Line
Menu: File – Start Menu: File – Start LoggingLogging
Start LineStart Line
Mouse: Toolbar IconMouse: Toolbar Icon Start LineStart Line
Start-Line GateStart-Line Gate Start LineStart Line
AVI
Start-Line Gate: Start-Line Gate: Going ‘On-Line’ and ‘Off-Line’ AutomaticallyGoing ‘On-Line’ and ‘Off-Line’ Automatically
Set ‘Start Line Gate’ distance in Navigation Parameters window.Set ‘Start Line Gate’ distance in Navigation Parameters window.
GateGate ActionAction00 Start Line DisabledStart Line Disabled
>0>0(radius)(radius)
Start Line whenStart Line whenvessel breaks circlevessel breaks circle
<0<0( radius )( radius )
Start Line whenStart Line whenvessel breaks semi-circlevessel breaks semi-circle
AVI
End Line: End Line: Stop the Recording of DataStop the Recording of Data
End Line terminates data logging. The data file is ‘closed’. SURVEY updates to the next planned line, based
on the ‘Line Increment’ in the NAVIGATION PARAMETERS window.
MethodMethod Action/ResultAction/ResultKeyboard: CTRL-EKeyboard: CTRL-E End LineEnd Line
Menu: File – End LoggingMenu: File – End Logging End LineEnd Line
Mouse: Toolbar IconMouse: Toolbar Icon End LineEnd Line
Start-Line Gate <> 0Start-Line Gate <> 0 End LineEnd Line
AVI
Pause Logging and Resume LoggingPause Logging and Resume Logging
Pause stops the output of info to the data file. The file is still open and navigation functions
are continued. Resume re-activates the flow of data into the
data file.
MethodMethod Action/ResultAction/ResultKeyboard: CTRL-U & CTRL-RKeyboard: CTRL-U & CTRL-R Pause…. ResumePause…. Resume
Menu: File – Pause LoggingMenu: File – Pause LoggingMenu: File – Resume LoggingMenu: File – Resume Logging
Pause….Pause…. ResumeResume
AVI
Aborting a Line: Aborting a Line: Let’s Go Back and Do This Line Again….Let’s Go Back and Do This Line Again….
Abort Logging:Abort Logging: Generates an immediate Generates an immediate
‘End Line’.‘End Line’. The current data file is The current data file is
saved, however it’s name saved, however it’s name is not written to the *.LOG is not written to the *.LOG file.file.
The current active planned The current active planned line remains the same.line remains the same.Let’s go survey it again.Let’s go survey it again.
Selecting Naming SchemeSelecting Naming SchemeProject Information WindowProject Information Window
In SURVEY:In SURVEY: Click on ‘Options – Project Click on ‘Options – Project
Information’.Information’. Select a naming scheme Select a naming scheme
for your raw data.for your raw data. At ‘Start-Line’, check the At ‘Start-Line’, check the
name of the new RAW data name of the new RAW data file.file.
Ability to add a user Ability to add a user defined prefix or append defined prefix or append the Julian Day to the data the Julian Day to the data filename.filename. Default
Naming SchemesNaming SchemesDefault Names for RAW FilesDefault Names for RAW Files
Line Type & MethodLine Type & Method 2-D Lines2-D LinesLine 2Line 2
3-D Lines3-D LinesLine 10+00Line 10+00
No LinesNo Lines
Standard HYPACK Standard HYPACK FilenamesFilenames 002_1607.RAW 10P00.RAW 000_1607.RAW
Long FilenamesLong Filenames 2003NA0061607_2.RAW(Vessel Name =
NANCY)2003NA0061607_2.RAW 2003NA0061607_0.RAW
CHS FilenamesCHS Filenames 2003NA0061607.RAW 2003NA0061607.RAW 2003NA0061607.RAW
Julian Day as Julian Day as ExtensionExtension
002_1607.006(JD = 006)
10P00.006 000_1607.006
Other Extension Other Extension (such as ‘ADB’)(such as ‘ADB’) 002_1607.ADB 10P00.ADB 000_1607.ADB
Naming Summary:Naming Summary:RAW Data File Already ExistsRAW Data File Already Exists
Line Type & MethodLine Type & Method 2-D Lines2-D LinesLine 2Line 2
3-D Lines3-D LinesLine 10+00Line 10+00
No LinesNo Lines
Standard HYPACK Standard HYPACK FilenamesFilenames
002A1607.RAW002A1607.RAW 10P00A.RAW10P00A.RAW 000A1607.RAW000A1607.RAW
Long FilenamesLong Filenames 2003NA0061607A2.RAW2003NA0061607A2.RAW[Vessel Name = NANCY][Vessel Name = NANCY]
2003NA0061607A2.RAW2003NA0061607A2.RAW 2003NA0061607A0.RAW2003NA0061607A0.RAW
CHS FilenamesCHS Filenames 2003NA0061607A.RAW2003NA0061607A.RAW 2003NA0061607A.RAW2003NA0061607A.RAW 2003NA0061607A.RAW2003NA0061607A.RAW
Julian Day as ExtensionJulian Day as Extension 002A1607.006002A1607.006[JD = 006, Jan 6][JD = 006, Jan 6]
10P00A.00610P00A.006 000A1607.006000A1607.006
Other Extension (ADB)Other Extension (ADB) 002A1607.ADB002A1607.ADB 10P00A.ADB10P00A.ADB 000A1607.ADB000A1607.ADB
First it adds an A, then a B, then a C, then a D, then an E. After ‘Z’, it adds ‘AA’ and so forth….
Area MapArea MapTracking the VesselTracking the Vessel
Four Options: Independent for each Area Map.Four Options: Independent for each Area Map.In Center: In Center: As the vessel approaches the edge of the window, it jumps back to the As the vessel approaches the edge of the window, it jumps back to the
edge. You can control the ‘In Center %’. The larger the number, the quicker it edge. You can control the ‘In Center %’. The larger the number, the quicker it moves back to the edge.moves back to the edge.
Look AheadLook Ahead: As the vessel starts to move away from the edge of the window, it : As the vessel starts to move away from the edge of the window, it jumps back to the edge.jumps back to the edge.
Vessel & TargetVessel & Target: Automatically zooms the screen as the vessel approaches the : Automatically zooms the screen as the vessel approaches the active target.active target.
No Tracking: No Tracking: The boat just goes off into space.The boat just goes off into space.
Area MapArea MapMap OrientationMap Orientation
Three Options:Three Options:User Defined Rotation: User Defined Rotation: Allows you to set a fixed rotation from north.Allows you to set a fixed rotation from north.Line Up: Line Up: Orients the planned line directly up the screen.Orients the planned line directly up the screen.Vessel Up: Vessel Up: Keeps the vessel pointed ‘up’ the screen and rotates the world Keeps the vessel pointed ‘up’ the screen and rotates the world
beneath it.beneath it. Each Area Map Window can have it’s own setting.Each Area Map Window can have it’s own setting.
Toolbox IconsToolbox Icons
Main Window ToolboxMain Window Toolbox• Turned on/off from Window Turned on/off from Window
menu drop-downmenu drop-down• Start-Line and End-Line iconsStart-Line and End-Line icons• Targeting iconsTargeting icons• Increment-Line, Decrement-Increment-Line, Decrement-
Line & Swap-Line iconsLine & Swap-Line icons• Water Level IconsWater Level Icons• Schemebuilder iconSchemebuilder icon
Area Map Window ToolboxArea Map Window Toolbox• Zoom IconsZoom Icons• Digitize Planned Line IconsDigitize Planned Line Icons• Anchor IconAnchor Icon• Print Window IconPrint Window Icon• Query Tool IconQuery Tool Icon• Anchor Management IconAnchor Management Icon• Auto Range Scale drop downAuto Range Scale drop down
Making a New Planned Line While in HYPACK SURVEYMaking a New Planned Line While in HYPACK SURVEY
Anchor Handling Routines
The “Boat Anchor Manager” window is accessed from the Vessels window.
From this window, you can drop and raise anchors and transfer them to other mobiles (support vessels).
You can also place floats on anchor wires or radius circles about dropped anchors.
CNTL-Click-and-Drag on an anchor to set a “marker”. Markers are planned anchor positions before they are deployed.
Upside down anchor symbols represent anchors that are “racked” (not deployed)
Right-click on an anchor or marker symbol to raise/drop the anchor. AVI
Tracking Points
SURVEY now allows you to have multiple tracking points on each mobile.
The X-Y-Z of each tracking point is updated and the user can select the “Main” tracking point to be used at any time from the Tracking Points window (above).
You can also log statistics on each tracking point to get the average position and standard deviation during rig moves.
Multiple Navigation Sensors Per Mobile
HYPACK SURVEY now allows you to assign multiple navigation systems to a mobile. The Boat Multi Position window can be used to select one or multiple systems to determine the final vessel position.
Remote Viewing over the Web: Survey Configuration
At the remote computer, tablet, cellphone…