door closer, locks reference guide(1)

BUILDERS HARDWARE MANUFACTURERS ASSOCIATION 355 Lexington Avenue, 15th Floor, New York, NY 10017-6603

Tel: 212-297-2122 Fax: 212-370-9047 www.buildershardware.com

FOREWORD

BHMA Certification Program was developed as a means for producers of builders hardware to indicate compliance with American National Standards sponsored by BHMA. Participating manufacturers certify compliance with the standards based on a continuing program of passing the prescribed tests. The sponsored American National Standards listed in this directory are performance orientated standards having cycle, operational, strength, security, and finish test requirements. Third party testing is performed by a Nationally Recognized Test Laboratory. The program is open to all manufacturers of builders hardware whether or not they are members of BHMA. A printed copy of the Certified Products Directory (CPD) is fully revised and updated once a year, each edition superceding the previous edition. The effective date is displayed on the cover. Updates, which may be required during the year in the event additional products are listed, any listed products are decertified, editorial changes are required or new licensees enter the program, are shown on the online version of the CPD found at www.buildershardware.com.

NOTE: ALWAYS REFER TO THE ONLINE CPD FOR THE MOST CURRENT LIST OF BHMA CERTIFIED PRODUCTS

A system of type number descriptions is provided in the Standards for each product. For convenience, a brief summary of the types is provided in this directory. Listees are permitted to certify models which are slightly different than the published types, provided they describe the features in the directory, and the model meets all other applicable requirements of the standard.

The BHMA Certification Mark

Please contact BHMA for copies of the Licensing Agreement, which includes the Operational Manuals, and the Certification Mark.

Only participants in the program are authorized to use the certification symbol. Licensees are encouraged to identify all certified products with the symbol attached to their products or packages. When used in advertising, or packaging, the symbol is not permitted to be displayed in proximity to products not certified under the Program. Symbol to be used in accordance with the guidelines. If a company is utilizing the BHMA Certified Mark on a product that is not listed in the Certified Products Directory or in the updated online version on www.buildershardware.com please contact BHMA at [email protected] or 212.297.2122.

2009 BHMA Certified Products Directory For the latest listing throughout the year, please visit the online BHMA Certified Products Directory which is updated

on a monthly basis and replace your pages with printouts from online. Thank you.

How can I be certain that a builders hardware product is certified? Look for the mark.

TABLE OF CONTENTS Page # Revision Date ANSI/BHMA A156.1 Butts and Hinges General Information 2 • Bommer Industries 3 • DORMA Gulf Door Controls 8 February 23, 2009 • Gallery Specialty Hardware 9 • Hager Companies 10 • H.B. Ives 15 • McKinney Products Company 16 • Stanley Commercial Hardware, a Product of Stanley Security Solutions 20 February 23, 2009

ANSI/BHMA A156.2 Bored & Preassembled Locks & Latches General Information 26 • Arrow Lock Manufacturing Company 31 March 31, 2009 • Best Access Systems, a Product Group of Stanley Security Solutions 33 February 23, 2009 • CAL-ROYAL Products, Inc. 34 May 20, 2009 • Corbin Russwin 35 • DORMA Architectural Hardware 36 • DORM Gulf Door Controls 37 • Falcon Lock Company_IR 38 • Gallery Specialty Hardware 40 • Hager Companies 41 • K2 42 • Kaba Ilco Corporation 44 • Kwikset Corporation 46 • Marks USA 48 • PDQ Manufacturing 51 • Sargent Manufacturing Company 52 May 20, 2009 • Schlage Lock Company 54 • Weiser Lock 56 • Yale Commercial Locks & Hardware 57 May 20, 2009 • Yale Residential Security Products 58

ANSI/BHMA A156.3 Exit Devices General Information 60 Adams Rite Manufacturing Company 62 • Arrow Lock Manufacturing Company 65 • C.R. Laurence Company 67 • CAL-ROYAL Products, Inc. 68 February 23, 2008 • Corbin Russwin 71 • Detex Corporation 73 • Door Controls International 75 • DORMA Architectural Hardware 77 • Dor-O-Matic_IR 81 • Falcon_IR 82 July 1, 2009 • Hager 85 • K2 87 • Kaba Ilco Corporation 91 • Monarch Hardware 93 • Precision Hardware, a Product Group of Stanley Security Solutions 98 February 23, 2009 • Sargent Manufacturing Company 104 • Total Door and Openings Company 109 • Von Duprin Division_IR 111 July 1, 2009 • Yale Commercial Locks & Hardware 114




Page # Revision Date ANSI/BHMA A156.4 Door Control-Closers General Information 117 • CAL-ROYAL Products, Inc. 118 March 31, 2009 • Corbin Ruswin 119 • DORMA Architectural Hardware 121 • Dor-O-Matic_IR 131 • Falcon Lock Company_IR 132 • Hager Companies 133 • K2 134 • LCN_IR 137 • Norton Door Controls 141 • PDQ Manufacturing 148 • Rixson-Firemark 149 • Saehan Hardware Company 152 • SAMHWA PRECISION CO., LTD 153 • Samuel Health 155 • Sargent Manufacturing Company 156 • Stanley Door Closers, a Product Group of Stanley Security Solutions 159 February 23, 2009 • Yale Security Inc. 161 ANSI/BHMA A156.5 Auxiliary Locks General Information 168 • Arrow Lock Manufacturing Company 172 • Baldwin Hardware Corporation 173 • Best Access Systems, a Product Group of Stanley Security Solutions 174 February 23, 2009 • CAL-ROYAL Products, Inc. 175 February 23, 2009 • Corbin Russwin 176 • DORMA Architectural Hardware 177 • Falcon Lock Company_IR 178 • Hager Companies 180 • K2 181 • Kaba Ilco Corporation 182 • Kwikset Corporation 183 • Marks USA 184 • Medeco Security Locks 185 July 1, 2009 • Sargent Manufacturing Company 186 • Schlage Lock Company 188 April 20, 2009 • Weiser Lock 191 • Yale Commercial Locks & Hardware 192 • Yale Residential Security Products 193 ANSI/BHMA A156.8 Door Controls – Overhead Stops & Holders General Information 195 • DORMA Architectural Hardware 196 • Sargent Manufacturing Company 198 ANSI/BHMA A156.9 Cabinet Hardware General Information 200 • Accuride 201 ANSI/BHMA A156.11 Cabinet Locks General Information 203 • CompX International 204




Page # Revision Date ANSI/BHMA A156.12 Interconnected Locks & Latches General Information 205 • DORMA Architectural Hardware 208 • Hager Companies 209 • K2 210 March 31. 2009 • Kwikset Corporation 211 • Schlage Lock Company 212 ANSI/BHMA A156.13 Mortise Locks General Information 214 • Arrow Lock Manufacturing Company 218 • Best Access Systems, a Product Group of Stanley Security Solutions 219 February 23, 2009 • Corbin Russwin 221 • DORMA Architectural Hardware 223 • DORMA Gulf Door Controls 225 March 31, 2009 • Falcon Lock Company_IR 227 • Gallery Specialty Hardware 229 • Hager Companies 230 • Kaba Ilco Corporation 231 • Marks USA 234 • ONITY 237 May 20, 2009 • PDQ Manufacturing 240 • Saflok 241 March 31, 2009 • Sargent Manufacturing Company 243 • Schlage Lock Company 245 • TownSteel 247 • Yale Commercial Locks & Hardware 248 ANSI/BHMA A156.15 Release Devices General Information 251 • DORMA Architectural Hardware 252 • LCN_IR 254 • Norton Door Controls 255 • Rixson-Firemark 256 • Sargent Manufacturing Company 257 • Yale Security Inc. 258 ANSI/BHMA A156.17 Self Closing Hinges General Information 260 • Bommer Industries 261 • CAL-ROYAL Products, Inc. 262 March 31, 2009 • Hager Companies 263 ANSI/BHMA A156.19 Power Assist & Low Energy Power Operated Doors General Information 265 • Arrow Lock Manufacturing Company 266 • DORMA Architectural Hardware 267 • LCN_IR 268 • Norton Door Controls 269 • Sargent Manufacturing Company 270 • Stanley Access Technologies 271




Page # Revision Date ANSI/BHMA A156.21 Thresholds General Information 273 • Hager Companies 274 • National Guard Products 276 May 20, 2009 • Pemko Manufacturing Company 288 ANSI/BHMA A156.22 Gaskets General Information 295 • Hager Companies 297 • National Guard Products 299 • Pemko Manufacturing Company 304 ANSI/BHMA A156.23 Electromagnetic Locks General Information 308 • Door Controls International 309 • DORMA Architectural Hardware 310 • Locknetics Security Engineering_IR 311 • Sargent Manufacturing Company 312 • Security Door Controls 313 ANSI/BHMA A156.24 Delayed Egress Locks General Information 315 • Corbin Russwin 316 • Detex Corporation 317 • Door Controls International 318 • DORMA Architectural Hardware 319 • Locknetics Security Engineering_IR 320 • Precision Hardware, a Product Group of Stanley Security Solutions 321 February 23, 2009 • Sargent Manufacturing Company 322 • Security Door Controls 323 • Von Duprin Division_IR 324 • Yale Commercial Locks & Hardware 325 ANSI/BHMA A156.25 Electrified Locking Devices General Information 327 • Kaba Ilco Corporation 328 • ONITY 331 May 20, 2009 • Saflok 334 March 31, 2009 ANSI/BHMA A156.26 Continuous Hinges General Information 337 • Gallery Specialty Hardware 338 • Hager Companies 339 • H.B. Ives 341 April 20, 2009 • Markar Architectural Products 342 • Pemko Manufacturing Company 343 • Select Hinges 344 • Stanley Commercial Hardware, a Product of Stanley Security Solutions 345 February 23, 2009




Page # Revision Date ANSI/BHMA A156.29 Exit Locks, Alarms General Information 347 • Detex Corporation 348 ANSI/BHMA A156.30 High Security Cylinders Product General Information 350 • Medeco Security Locks 351 ANSI/BHMA A156.31 Electric Strikes and Frame Mounted Actuators General Information 353 • Adams Rite Manufacturing Company 354 April 20, 2009

Butts and Hinges

ANSI/BHMA A156.1

2009 DIRECTORY

Butts and H

inges

BHMA: 2009 CERTIFIED PRODUCTS DIRECTORY

2

GENERAL INFORMATION EXPLANATION OF HINGE NUMBERING SYSTEM (A156.1) First letter denotes BHMA Hinge Section (A) First numeral indicates general type of material used: 1-Cast, Forged or Extruded Brass or Bronze 5-Stainless Steel, 300 Series 2-Wrought Brass or Bronze 8-Wrought Steel, Forged Steel, Cast Steel or Malleable Iron Second numeral identifies type of product: 1-Full Mortise Hinges 6-Olive Knuckle Hinges 2-Half Mortise Hinges 7-Pivot Hinges 3-Full Surface Hinges 8-Rescue Hardware 4-Half Surface Hinges 9-Pocket Door Hinge 5-Anchor, Pivot Reinforced or Thrust Pivot Unit and Hinge Sets Third numeral identifies the function or the description of the item or both: 1 - Anti-friction Bearing 3 - Plain Bearing 2 - Anti-friction Bearing - Swing Clear 4 through 0 - Special Condition Fourth numeral designates the grade classification of the item: 1 - Grade 1 3 - Grade 3 2 - Grade 2 4 - Light Weight Example: A2412 A - Section A 2 - Material (Wrought Brass or Bronze) 4 - Type (Half Surface Hinge) 1 - Description (Anti-friction Bearing) 2 - Grade (Grade 2)


3

Bommer Industries, Inc. P.O. Box 187

19810 Asheville Highway Landrum, South Carolina 29356

1-800-334-1654 www.bommer.com

A156.1 2006 Butts & Hinges

9.1 Full Mortise Hinges ANSI Hinge Hinge Bommer Base Part # Type Grade Part # Material A2111 Full Mort / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5005 Brass A2111 Full Mort / Hvy Wgt / Lube Bearing / 5K Grade 1 LB5005 Brass A2111 Full Mort / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8005 Brass A5111 Full Mort / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5006 Stainless Steel A5111 Full Mort / Hvy Wgt / Lube Bearing / 5K Grade 1 LB5006 Stainless Steel A5111 Full Mort / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8006 Stainless Steel A8111 Full Mort / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5004 Steel A8111 Full Mort / Hvy Wgt / Lube Bearing / 5K Grade 1 LB5004 Steel A8111 Full Mort / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8004 Steel A2112 Full Mort / Std Wgt / Ball Bearing / 5K Grade 2 BB5001 Brass A2112 Full Mort / Std Wgt / Lube Bearing / 5K Grade 2 LB5001 Brass A2112 Full Mort / Std Wgt / Lube Bearing / 3K Grade 2 LB8001 Brass A5112 Full Mort / Std Wgt / Ball Bearing / 5K Grade 2 BB5002 Stainless Steel A5112 Full Mort / Std Wgt / Lube Bearing / 5K Grade 2 LB5002 Stainless Steel A5112 Full Mort / Std Wgt / Lube Bearing / 3K Grade 2 LB8002 Stainless Steel A8112 Full Mort / Std Wgt / Ball Bearing / 5K Grade 2 BB5000 Steel A8112 Full Mort / Std Wgt / Lube Bearing / 5K Grade 2 LB5000 Steel A8112 Full Mort / Std Wgt / Lube Bearing / 3K Grade 2 LB8000 Steel A2133 Full Mort / Std Wgt / Plain Bearing / 5K Grade 3 5001 Brass A2133 Full Mort / Std Wgt / Plain Bearing / 3K Grade 3 8001 Brass A5133 Full Mort / Std Wgt / Plain Bearing / 5K Grade 3 5002 Stainless Steel A5133 Full Mort / Std Wgt / Plain Bearing / 3K Grade 3 8002 Stainless Steel A8133 Full Mort / Std Wgt / Plain Bearing / 5K Grade 3 5000 Steel A8133 Full Mort / Std Wgt / Plain Bearing / 3K Grade 3 8000 Steel


4

Bommer Industries, Inc. (Continued)

9.1 Full Mortise Wide Throw Hinges ANSI Hinge Hinge Bommer Base Part # Type Grade Part # Material A2111 Full Mort / W-Throw / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5015 Brass A2111 Full Mort / W-Throw / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8015 Brass A5111 Full Mort / W-Throw / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5016 Stainless Steel A5111 Full Mort / W-Throw / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8016 Stainless Steel A8111 Full Mort / W-Throw / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5014 Steel A8111 Full Mort / W-Throw / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8014 Steel A2112 Full Mort / W-Throw / Std Wgt / Ball Bearing / 5K Grade 2 BB5011 Brass A2112 Full Mort / W-Throw / Std Wgt / Lube Bearing / 3K Grade 2 LB8011 Brass A5112 Full Mort / W-Throw / Std Wgt / Ball Bearing / 5K Grade 2 BB5012 Stainless Steel A5112 Full Mort / W-Throw / Std Wgt / Lube Bearing / 3K Grade 2 LB8012 Stainless Steel A8112 Full Mort / W-Throw / Std Wgt / Ball Bearing / 5K Grade 2 BB5010 Steel A8112 Full Mort / W-Throw / Std Wgt / Lube Bearing / 3K Grade 2 LB8010 Steel A2133 Full Mort / W-Throw / Std Wgt / Plain Bearing / 5K Grade 3 5011 Brass A2133 Full Mort / W-Throw / Std Wgt / Plain Bearing / 3K Grade 3 8011 Brass A5133 Full Mort / W-Throw / Std Wgt / Plain Bearing / 5K Grade 3 5012 Stainless Steel A5133 Full Mort / W-Throw / Std Wgt / Plain Bearing / 3K Grade 3 8012 Stainless Steel A8133 Full Mort / W-Throw / Std Wgt / Plain Bearing / 5K Grade 3 5010 Steel A8133 Full Mort / W-Throw / Std Wgt / Plain Bearing / 3K Grade 3 8010 Steel

9.1 Full Mortise Raised Barrel Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2111 Full Mort / R-Barrel / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5045 Brass A2111 Full Mort / R-Barrel / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8045 Brass A5111 Full Mort / R-Barrel / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5046 Stainless Steel A5111 Full Mort / R-Barrel / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8046 Stainless Steel A8111 Full Mort / R-Barrel / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5044 Steel A8111 Full Mort / R-Barrel / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8044 Steel A2112 Full Mort / R-Barrel / Std Wgt / Ball Bearing / 5K Grade 2 BB5041 Brass A2112 Full Mort / R-Barrel / Std Wgt / Lube Bearing / 3K Grade 2 LB8041 Brass A5112 Full Mort / R-Barrel / Std Wgt / Ball Bearing / 5K Grade 2 BB5042 Stainless Steel A5112 Full Mort / R-Barrel / Std Wgt / Lube Bearing / 3K Grade 2 LB8042 Stainless Steel A8112 Full Mort / R-Barrel / Std Wgt / Ball Bearing / 5K Grade 2 BB5040 Steel A8112 Full Mort / R-Barrel / Std Wgt / Lube Bearing / 3K Grade 2 LB8040 Steel


5

Bommer Industries, Inc. (Continued)

9.1 Full Mortise Swing Clear Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2121 Full Mort / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5025 Brass A2121 Full Mort / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8025 Brass A5121 Full Mort / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5026 Stainless Steel A5121 Full Mort / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8026 Stainless Steel A8121 Full Mort / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5024 Steel A8121 Full Mort / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8024 Steel A2122 Full Mort / Swing Clear / Std Wgt / Ball Bearing / 5K Grade 2 BB5021 Brass A2122 Full Mort / Swing Clear / Std Wgt / Lube Bearing / 3K Grade 2 LB8021 Brass A5122 Full Mort / Swing Clear / Std Wgt / Ball Bearing / 5K Grade 2 BB5022 Stainless Steel A5122 Full Mort / Swing Clear / Std Wgt / Lube Bearing / 3K Grade 2 LB8022 Stainless Steel A8122 Full Mort / Swing Clear / Std Wgt / Ball Bearing / 5K Grade 2 BB5020 Steel A8122 Full Mort / Swing Clear / Std Wgt / Lube Bearing / 3K Grade 2 LB8020 Steel

9.2 Full Mortise Slip In Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2142 Full Mort / Slip In / Std Wgt / Ball Bearing / 5K Grade 2 BB5051 Brass A2142 Full Mort / Slip In / Std Wgt / Lube Bearing / 3K Grade 2 LB8051 Brass A5142 Full Mort / Slip In / Std Wgt / Ball Bearing / 5K Grade 2 BB5052 Stainless Steel A5142 Full Mort / Slip In / Std Wgt / Lube Bearing / 3K Grade 2 LB8052 Stainless Steel A8142 Full Mort / Slip In / Std Wgt / Ball Bearing / 5K Grade 2 BB5050 Steel A8142 Full Mort / Slip In / Std Wgt / Lube Bearing / 3K Grade 2 LB8050 Steel A2143 Full Mort / Slip In / Std Wgt / Plain Bearing / 5K Grade 3 5051 Brass A2143 Full Mort / Slip In / Std Wgt / Plain Bearing / 3K Grade 3 8051 Brass A5143 Full Mort / Slip In / Std Wgt / Plain Bearing / 5K Grade 3 5052 Stainless Steel A5143 Full Mort / Slip In / Std Wgt / Plain Bearing / 3K Grade 3 8052 Stainless Steel A8143 Full Mort / Slip In / Std Wgt / Plain Bearing / 5K Grade 3 5050 Steel A8143 Full Mort / Slip In / Std Wgt / Plain Bearing / 3K Grade 3 8050 Steel


6

Bommer Industries, Inc. (Continued) 9.3 Half Mortise Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2211 Half Mort / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5105 Brass A2211 Half Mort / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8105 Brass A5211 Half Mort / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5106 Stainless Steel A5211 Half Mort / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8106 Stainless Steel A8211 Half Mort / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5104 Steel A8211 Half Mort / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8104 Steel A2221 Half Mort / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5125 Brass A2221 Half Mort / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8125 Brass A5221 Half Mort / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5126 Stainless Steel A5221 Half Mort / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8126 Stainless Steel A8221 Half Mort / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5124 Steel A8221 Half Mort / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8124 Steel A2212 Half Mort / Std Wgt / Ball Bearing / 5K Grade 2 BB5101 Brass A2212 Half Mort / Std Wgt / Lube Bearing / 3K Grade 2 LB8101 Brass A5212 Half Mort / Std Wgt / Ball Bearing / 5K Grade 2 BB5102 Stainless Steel A5212 Half Mort / Std Wgt / Lube Bearing / 3K Grade 2 LB8102 Stainless Steel A8212 Half Mort / Std Wgt / Ball Bearing / 5K Grade 2 BB5100 Steel A8212 Half Mort / Std Wgt / Lube Bearing / 3K Grade 2 LB8100 Steel A2233 Half Mort / Std Wgt / Plain Bearing / 5K Grade 3 5101 Brass A2233 Half Mort / Std Wgt / Plain Bearing / 3K Grade 3 8101 Brass A5233 Half Mort / Std Wgt / Plain Bearing / 5K Grade 3 5102 Stainless Steel A5233 Half Mort / Std Wgt / Plain Bearing / 3K Grade 3 8102 Stainless Steel A8233 Half Mort / Std Wgt / Plain Bearing / 5K Grade 3 5100 Steel A8233 Half Mort / Std Wgt / Plain Bearing / 3K Grade 3 8100 Steel 9.4 Full Surface Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2311 Full Surface / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5205 Brass A2311 Full Surface / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8205 Brass A5311 Full Surface / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5206 Stainless Steel A5311 Full Surface / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8206 Stainless Steel A8311 Full Surface / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5204 Steel A8311 Full Surface / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8204 Steel A2321 Full Surface / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5225 Brass A2321 Full Surface / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8225 Brass A5321 Full Surface / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5226 Stainless Steel A5321 Full Surface / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8226 Stainless Steel A8321 Full Surface / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5224 Steel A8321 Full Surface / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8224 Steel A2312 Full Surface / Std Wgt / Ball Bearing / 5K Grade 2 BB5201 Brass A2312 Full Surface / Std Wgt / Lube Bearing / 3K Grade 2 LB8201 Brass A5312 Full Surface / Std Wgt / Ball Bearing / 5K Grade 2 BB5202 Stainless Steel A5312 Full Surface / Std Wgt / Lube Bearing / 3K Grade 2 LB8202 Stainless Steel A8312 Full Surface / Std Wgt / Ball Bearing / 5K Grade 2 BB5200 Steel A8312 Full Surface / Std Wgt / Lube Bearing / 3K Grade 2 LB8200 Steel


7

Bommer Industries, Inc. (Continued) 9.5 Half Surface Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2411 Half Surface / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5305 Brass A2411 Half Surface / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8305 Brass A5411 Half Surface / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5306 Stainless Steel A5411 Half Surface / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8306 Stainless Steel A8411 Half Surface / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5304 Steel A8411 Half Surface / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8304 Steel A2421 Half Surface / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5325 Brass A2421 Half Surface / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8325 Brass A5421 Half Surface / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5326 Stainless Steel A5421 Half Surface / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8326 Stainless Steel A8421 Half Surface / Swing Clear / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5324 Steel A8421 Half Surface / Swing Clear / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8324 Steel A2412 Half Surface / Std Wgt / Ball Bearing / 5K Grade 2 BB5301 Brass A2412 Half Surface / Std Wgt / Lube Bearing / 3K Grade 2 LB8301 Brass A5412 Half Surface / Std Wgt / Ball Bearing / 5K Grade 2 BB5302 Stainless Steel A5412 Half Surface / Std Wgt / Lube Bearing / 3K Grade 2 LB8302 Stainless Steel A8412 Half Surface / Std Wgt / Ball Bearing / 5K Grade 2 BB5300 Steel A8412 Half Surface / Std Wgt / Lube Bearing / 3K Grade 2 LB8300 Steel A2433 Half Surface / Std Wgt / Plain Bearing / 5K Grade 3 5301 Brass A2433 Half Surface / Std Wgt / Plain Bearing / 3K Grade 3 8301 Brass A5433 Half Surface / Std Wgt / Plain Bearing / 5K Grade 3 5302 Stainless Steel A5433 Half Surface / Std Wgt / Plain Bearing / 3K Grade 3 8302 Stainless Steel A8433 Half Surface / Std Wgt / Plain Bearing / 5K Grade 3 5300 Steel A8433 Half Surface / Std Wgt / Plain Bearing / 3K Grade 3 8300 Steel

9.6 Full Mortise Anchor Hinges ANSI Part #

Hinge Type

Hinge Grade

Bommer Part #

Base Material

A2511 Anchor / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5035 Brass A2511 Anchor / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8035 Brass A5511 Anchor / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5036 Stainless Steel A5511 Anchor / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8036 Stainless Steel A8511 Anchor / Hvy Wgt / Ball Bearing / 5K Grade 1 BB5034 Steel A8511 Anchor / Hvy Wgt / Lube Bearing / 3K Grade 1 LB8034 Steel


8

Dorma Gulf Door Controls FZE P.O. Box 17268 Jebel Ali Dubai, UAE Tell: 009714 802 0400 Fax: 009714 886 9100

A156.1 – 2000 BUTT HINGES

ANSI PART

#

HINGE GRADE GSH # BASE MATERIAL

A156.1 JC603 4.5" X 4.5" X 3.4mm 2BB US26D

1 GSHJC603 Steel

A156.1 JC603 4.5" X 4.5" X 3.4mm 2BB

US32D 1

GSHJC603 Stainless Steel A156.1 JC603 4.5" X 4" X 3.4mm 2BB US32D 1 GSHJC603 Stainless Steel A156.1 JC620 4.5" X 4.5" X 4.6mm 4BB

US26D 1

GSHJC620 Steel A156.1 JC620 4.5" X 4" X 4.6mm 4BB US26D 1 GSHJC620 Steel A156.1 JC620 4.5" X 4.5" X 4.6mm 4BB

US32D 1

GSHJC620 Stainless Steel A156.1 JC620 4.5" X 4" X 4.6mm 4BB US32D 1 GSHJC620 Stainless Steel VERIFICATION REPORT NUMBERS: JGZ0706177-3 JGZ0706177-1 JGZ0702023-3 JGZ0702023-4 SUBSECTION TEST DESCRIPTION RESULT 5.11 Overload Test Compliant 6.6 Friction Test Compliant 6.1 Cycle Test Compliant POST CYCLE TEST 6.2 Hinge Pin Rise Test Compliant 6.4 Vertical and Lateral Wear Test Compliant 6.5 Overload Test Compliant 6.6 Friction Test Compliant


9

A156.1 – 2000 BUTT HINGES

ANSI PART #


A156.1 JC603 4.5" X 4.5" X 3.4mm 2BB US26D

1 GSHJC603 Steel

A156.1 JC603 4.5" X 4" X 3.4mm 2BB US26D 1 GSHJC603 Steel A156.1 JC603 4.5" X 4.5" X 3.4mm 2BB

US32D 1

GSHJC603 Stainless Steel A156.1 JC603 4.5" X 4" X 3.4mm 2BB US32D 1 GSHJC603 Stainless Steel A156.1 JC620 4.5" X 4.5" X 4.6mm 4BB

US26D 1

GSHJC620 Steel A156.1 JC620 4.5" X 4" X 4.6mm 4BB US26D 1 GSHJC620 Steel A156.1 JC620 4.5" X 4.5" X 4.6mm 4BB

US32D 1

GSHJC620 Stainless Steel A156.1 JC620 4.5" X 4" X 4.6mm 4BB US32D 1 GSHJC620 Stainless Steel VERIFICATION REPORT NUMBERS: JGZ0706700-3 JGZ0706700-1 JGZ0706700-3 JGZ0706700-4 SUBSECTION TEST DESCRIPTION RESULT 5.11 Overload Test Compliant 6.6 Friction Test Compliant 6.1 Cycle Test Compliant POST CYCLE TEST 6.2 Hinge Pin Rise Test Compliant 6.4 Vertical and Lateral Wear Test Compliant 6.5 Overload Test Compliant 6.6 Friction Test Compliant


10

Hager Companies 139 Victor Street, P.O. Box 12300

St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.1 2000 Butts & Hinges 9.1 Full Mortise Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A2111 Hvy Wgt / Anti-Friction / 3K 1 AB850 Brass A2111 Hvy Wgt / Anti-Friction / Hosp Type / 3K 1 HTAB850 Brass A2111 Hvy Wgt / Anti-Friction / Wide Throw / 3K 1 WTAB850 Brass A2111 Hvy Wgt / Anti-Friction / 2K 1 AB933 Brass A2111 Hvy Wgt / Anti-Friction / 5K 1 BB1199 Brass A2111 Hvy Wgt / Anti-Friction / Hosp Type / 5K 1 HTBB1199 Brass A2111 Hvy Wgt / Anti-Friction / Wide Throw / 5K 1 WTBB1199 Brass A5111 Hvy Wgt / Anti-Friction / 3K 1 AB850 Stainless Steel A5111 Hvy Wgt / Anti-Friction / Hosp Type / 3K 1 HTAB850 Stainless Steel A5111 Hvy Wgt / Anti-Friction / Wide Throw / 3K 1 WTAB850 Stainless Steel A5111 Hvy Wgt / Anti-Friction / 2K 1 AB933 Stainless Steel A5111 Hvy Wgt / Anti-Friction / 5K 1 BB1199 Stainless Steel A5111 Hvy Wgt / Anti-Friction / Hosp Type / 5K 1 HTBB1199 Stainless Steel A5111 Hvy Wgt / Anti-Friction / Wide Throw / 5K 1 WTBB1199 Stainless Steel A8111 Hvy Wgt / Anti-Friction / 3K 1 AB750 Steel A8111 Hvy Wgt / Anti-Friction / Hosp Type / 3K 1 HTAB750 Steel A8111 Hvy Wgt / Anti-Friction / Wide Throw / 3K 1 WTAB750 Steel A8111 Hvy Wgt / Anti-Friction / 2K 1 AB930 Steel A8111 Hvy Wgt / Anti-Friction / 5K 1 BB1168 Steel A8111 Hvy Wgt / Anti-Friction / Hosp Type / 5K 1 HTBB1168 Steel A8111 Hvy Wgt / Anti-Friction / Wide Throw / 5K 1 WTBB1168 Steel A2112 Std Wgt / Anti-Friction / 3K 2 AB800 Brass A2112 Std Wgt / Anti-Friction / Hosp Type / 3K 2 HTAB800 Brass A2112 Std Wgt / Anti-Friction / Wide Throw / 3K 2 WTAB800 Brass A2112 Std Wgt / Anti-Friction / 2K 2 AB923 Brass A2112 Std Wgt / Anti-Friction / 5K 2 BB1191 Brass A2112 Std Wgt / Anti-Friction / Hosp Type / 5K 2 HTBB1191 Brass A2112 Std Wgt / Anti-Friction / Wide Throw / 5K 2 WTBB1191 Brass


11

Hager Companies (Continued) A156.1 2000 Butts & Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A5112 Std Wgt / Anti-Friction / 3K 2 AB800 Stainless Steel A5112 Std Wgt / Anti-Friction / Hosp Type / 3K 2 HTAB800 Stainless Steel A5112 Std Wgt / Anti-Friction / Wide Throw / 3K 2 WTAB800 Stainless Steel A5112 Std Wgt / Anti-Friction / 2K 2 AB923 Stainless Steel A5112 Std Wgt / Anti-Friction / 5K 2 BB1191 Stainless Steel A5112 Std Wgt / Anti-Friction / Hosp Type / 5K 2 HTBB1191 Stainless Steel A5112 Std Wgt / Anti-Friction / Wide Throw / 5K 2 WTBB1191 Stainless Steel A8112 Std Wgt / Anti-Friction / 3K 2 AB700 Steel A8112 Std Wgt / Anti-Friction/ Hosp Type / 3K 2 HTAB700 Steel A8112 Std Wgt / Anti-Friction / Wide Throw / 3K 2 WTAB700 Steel A8112 Std Wgt / Anti-Friction / 2K 2 AB920 Steel A8112 Std Wgt / Anti-Friction / 5K 2 BB1279 Steel A8112 Std Wgt / Anti-Friction/ Hosp Type / 5K 2 HTBB1279 Steel A8112 Std Wgt / Anti-Friction / Wide Throw / 5K 2 WTBB1279 Steel A2133 Std Wgt / Plain Bearing / 3K 2 800 Brass A2133 Std Wgt / Plain Bearing/ Hosp Type / 3K 2 HT800 Brass A5133 Std Wgt / Plain Bearing / 3K 2 800 Stainless Steel A5133 Std Wgt / Plain Bearing/ Hosp Type / 3K 2 HT800 Stainless Steel A8133 Std Wgt / Plain Bearing / 3K 2 700 Steel A8133 Std Wgt / Plain Bearing/ Hosp Type / 3K 2 HT700 Steel A8133 Std Wgt / Plain Bearing / 2K 2 920 Steel A2133 Std Wgt / Plain Bearing / 5K 2 1191 Brass A2133 Std Wgt / Plain Bearing/ Hosp Type / 5K 2 HT1191 Brass A2133 Std Wgt / Plain Bearing / Wide Throw / 5K 2 WT1191 Brass A5133 Std Wgt / Plain Bearing / 5K 2 1191 Stainless Steel A5133 Std Wgt / Plain Bearing/ Hosp Type / 5K 2 HT1191 Stainless Steel A5133 Std Wgt / Plain Bearing / Wide Throw / 5K 2 WT1191 Stainless Steel A8133 Std Wgt / Plain Bearing / 5K 2 1279 Steel A8133 Std Wgt / Plain Bearing/ Hosp Type / 5K 2 HT1279 Steel A8133 Std Wgt / Plain Bearing / Wide Throw / 5K 2 WT1279 Steel 9.2 Full Mortise Hinge Slip-In ANSI Part # Hinge Type Grade Hager Part # Base Material A2142 Std Wgt/Anti-Friction/Both leaves tapped/5K 2 BB1577 Brass A2152 Std Wgt/Anti-Friction/One leaf tapped/5K 2 BB1578 Brass A8142 Std Wgt/Anti-Friction/Both leaves tapped/5K 2 BB1277 Steel A8152 Std Wgt/Anti-Friction/One leaf tapped/5K 2 BB1278 Steel A2143 Std Wgt/Plain Bearing/Both leaves tapped/5K 2 1577 Brass A2153 Std Wgt/Plain Bearing/One leaf tapped/5K 2 1578 Brass A8143 Std Wgt/Plain Bearing/Both leaves tapped/5K 2 1277 Steel A8153 Std Wgt/Plain Bearing/One leaf tapped /5K 2 1278 Steel


12

Hager Companies (Continued) A156.1 2000 Butts & Hinges 9.3 Half Mortise Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A2211 Half Mort / Hvy Wgt / Anti-Friction /3K 1 AB851 Brass A5211 Half Mort / Hvy Wgt / Anti-Friction /3K 1 AB851 Stainless Steel A8211 Half Mort / Hvy Wgt / Anti-Friction /3K 1 AB751 Steel A2212 Half Mort / Std Wgt / Anti-Friction /3K 2 AB801 Brass A5212 Half Mort / Std Wgt / Anti-Friction /3K 2 AB801 Stainless Steel A8212 Half Mort / Std Wgt / Anti-Friction /3K 2 AB701 Steel A2211 Half Mort / Hvy Wgt / Anti-Friction /5K 1 BB2098 Brass A5211 Half Mort / Hvy Wgt / Anti-Friction /5K 1 BB2098 Stainless Steel A8211 Half Mort / Hvy Wgt / Anti-Friction /5K 1 BB1138 Steel A2212 Half Mort / Std Wgt / Anti-Friction /5K 2 BB1109 Brass A5212 Half Mort / Std Wgt / Anti-Friction /5K 2 BB1109 Stainless Steel A8212 Half Mort / Std Wgt / Anti-Friction /5K 2 BB1129 Steel A8233 Half Mort / Std Wgt / Plain Bearing /5K 2 1129 Steel 9.4 Full Surface Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A2311 Full Surface / Hvy Wgt / Anti-Friction /3K 1 AB852 Brass A5311 Full Surface / Hvy Wgt / Anti-Friction /3K 1 AB852 Stainless Steel A8311 Full Surface / Hvy Wgt / Anti-Friction /3K 1 AB752 Steel A2312 Full Surface / Std Wgt / Anti-Friction /3K 2 AB802 Brass A5312 Full Surface / Std Wgt / Anti-Friction /3K 2 AB802 Stainless Steel A8312 Full Surface / Std Wgt / Anti-Friction /3K 2 AB702 Steel A2311 Full Surface / Hvy Wgt / Anti-Friction /5K 1 BB2109 Brass A5311 Full Surface / Hvy Wgt / Anti-Friction /5K 1 BB2109 Stainless Steel A8311 Full Surface / Hvy Wgt / Anti-Friction /5K 1 BB2169 Steel A2312 Full Surface / Std Wgt / Anti-Friction /5K 2 BB2110 Brass A5312 Full Surface / Std Wgt / Anti-Friction /5K 2 BB2110 Stainless Steel A8312 Full Surface / Std Wgt / Anti-Friction /5K 2 BB2171 Steel A2361 Full Surface / Hvy Wgt / Anti-Friction /5K 1 BB2108 Brass A5361 Full Surface / Hvy Wgt / Anti-Friction /5K 1 BB2108 Stainless Steel A8361 Full Surface / Hvy Wgt / Anti-Friction /5K 1 BB2168 Steel


13

Hager Companies (Continued) A156.1 2000 Butts & Hinges 9.5 Half Surface Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A2411 Half Surface / Hvy Wgt / Anti-Friction /3K 1 AB853 Brass A5411 Half Surface / Hvy Wgt / Anti-Friction /3K 1 AB853 Stainless Steel A8411 Half Surface / Hvy Wgt / Anti-Friction /3K 1 AB753 Steel A2412 Half Surface / Std Wgt / Anti-Friction /3K 2 AB803 Brass A5412 Half Surface / Std Wgt / Anti-Friction /3K 2 AB803 Stainless Steel A8412 Half Surface / Std Wgt / Anti-Friction /3K 2 AB703 Steel A2411 Half Surface / Hvy Wgt / Anti-Friction /5K 1 BB2113 Brass A5411 Half Surface / Hvy Wgt / Anti-Friction /5K 1 BB2113 Stainless Steel A8411 Half Surface / Hvy Wgt / Anti-Friction /5K 1 BB1163 Steel A2412 Half Surface / Std Wgt / Anti-Friction /5K 2 BB2112 Brass A5412 Half Surface / Std Wgt / Anti-Friction /5K 2 BB2112 Stainless Steel A8412 Half Surface / Std Wgt / Anti-Friction /5K 2 BB1173 Steel A8433 Half Surface / Std Wgt / Plain Bearing /5K 2 1173 Steel 9.6 Anchor Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material Anchor Hinge / Heavy Weight / Anti-Friction A2511 Long Frame Leaf / 3K 1 AB8505 Brass A5511 Long Frame Leaf / 3K 1 AB8505 Stainless Steel A8511 Long Frame Leaf / 3K 1 AB7505 Steel A2511 Long Frame Leaf / 5K 1 BB1190 Brass A5511 Long Frame Leaf / 5K 1 BB1190 Stainless Steel A8511 Long Frame Leaf / 5K 1 BB1160 Steel A2511 Square/Both Leaves Long / 3K 1 AB8506 Brass A2511 Beveled/ Both Leaves Long / 3K 1 AB8508 Brass A5511 Square/Both Leaves Long / 3K 1 AB8506 Stainless Steel A5511 Beveled/ Both Leaves Long / 3K 1 AB8508 Stainless Steel A8511 Square/Both Leaves Long / 3K 1 AB7506 Steel A8511 Beveled/ Both Leaves Long / 3K 1 AB7508 Steel A2511 Square/Both Leaves Long / 5K 1 BB1192 Brass A2511 Beveled/ Both Leaves Long / 5K 1 BB1196 Brass A5511 Square/Both Leaves Long / 5K 1 BB1192 Stainless Steel A5511 Beveled/ Both Leaves Long / 5K 1 BB1196 Stainless Steel A8511 Square/Both Leaves Long / 5K 1 BB1162 Steel A8511 Beveled/ Both Leaves Long / 5K 1 BB1166 Steel A2511 Sq./Long Frame Leaf/Short Door Leaf /3K 1 AB8507 Brass A2511 Bev./Long Frame Leaf/Short Door Leaf /3K 1 AB8509 Brass A5511 Sq./Long Frame Leaf/Short Door Leaf /3K 1 AB8507 Stainless Steel


14

Hager Companies (Continued) A156.1 2000 Butts & Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material Anchor Hinge / Heavy Weight / Anti-Friction A5511 Bev./Long Frame Leaf/Short Door Leaf/3K 1 AB8509 Stainless Steel A8511 Sq./Long Frame Leaf/Short Door Leaf/3K 1 AB7507 Steel A8511 Bev./Long Frame Leaf/Short Door Leaf/3K 1 AB7509 Steel A2511 Sq./Long Frame Leaf/Short Door Leaf/5K 1 BB1195 Brass A2511 Bev./Long Frame Leaf/Short Door Leaf/5K 1 BB1197 Brass A5511 Sq./Long Frame Leaf/Short Door Leaf/5K 1 BB1195 Stainless Steel A5511 Bev./Long Frame Leaf/Short Door Leaf/5K 1 BB1197 Stainless Steel A8511 Sq./Long Frame Leaf/Short Door Leaf/5K 1 BB1165 Steel A8511 Bev./Long Frame Leaf/Short Door Leaf/5K 1 BB1167 Steel 9.8 Pivot Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A2793 Single Acting Pivot / Std Wgt 3 500 Brass / Steel / Stainless Steel A2792 Single Acting Pivot / Hvy Wgt 2 550 Brass / Steel / Stainless Steel 9.9 Rescue Hardware ANSI Part # Hinge Type Grade Hager Part # Base Material A1882 Emergency Door Release 2 610 Brass / Steel A2742 Double Acting Pivot 2 510 / 600 Brass / Steel A2742 Double Acting Pivot 2 511 / 611 Brass / Steel A2742 Double Acting Pivot 2 512 / 612 Brass / Steel 9.10 Detention Hinges ANSI Part # Hinge Type Grade Hager Part # Base Material A5111 Full Mortise / Hvy Wgt / Anti-Fiction /3K 1 IHTHB953 Stainless Steel A5111 Full Mortise / Hvy Wgt / Anti-Fiction /3K 1 IHTAB850 Stainless Steel A8181 Full Mortise / Hvy Wgt / Anti-Fiction /3K 1 IHTAB750 Steel


15

H.B.IVES INGERSOLL RAND SECURITY TECHNOLOGIES

50 IVES PLACE NEW HAVEN, CT. 60511

(203)772-4837

CERTIFIED BUTTS & HINGES The following are the Licensee’s catalog designations for products meeting the requirements of ANSI/BHMA A156.1 - 2006 for Butts & Hinges. Full Mortise Hinges ANSI # Description Grade Model # Material A8111 Full Mort/Hvy Wt/Ball Brng/5K 1 5BB1 HW Steel A2111 Full Mort/Hvy Wt/Ball Brng/5K 1 5BB1 HW Brass A5111 Full Mort/Hvy Wt/Ball Brng/5K 1 5BB1 HW St. Steel A8111 Full Mort/Hvy Wt/Ball Brng/5K 1 5BB1 HW NRP Steel A2111 Full Mort/Hvy Wt/Ball Brng/5K 1 5BB1 HW NRP Brass A5111 Full Mort/Hvy Wt/Ball Brng/5K 1 5BB1 HW NRP St. Steel A8112 Full Mort/Std Wt/Ball Brg/5K 2 5BB1 Steel A2112 Full Mort/Std Wt/Ball Brg/5K 2 5BB1 Brass A5112 Full Mort/Std Wt/Ball Brg/5K 2 5BB1 St. Steel A8112 Full Mort/Std Wt/Ball Brg/5K 2 5BB1 NRP Steel A2112 Full Mort/Std Wt/Ball Brg/5K 2 5BB1 NRP Brass A5112 Full Mort/Std Wt/Ball Brg/5K 2 5BB1 NRP St. Steel A8122 F Mort/Swg Clr/Std Wt/Pln Brg/5K 2 5BB1 SC Steel A8112 Full Mort/Std Wt/Ball Brg/3K 2 3CB1 Steel A5112 Full Mort/Std Wt/Ball Brg/3K 2 3CB1 St. Steel A8112 Full Mort/Std Wt/Ball Brg/3K 2 3CB1 NRP Steel A5112 Full Mort/Std Wt/Ball Brg/3K 2 3CB1 NRP St. Steel A8133 Full Mort/Std Wt/Plain Brg/5K 3 5PB1 Steel A2133 Full Mort/Std Wt/Plain Brg/5K 3 5PB1 Brass A5133 Full Mort/Std Wt/Plain Brg/5K 3 5PB1 St. Steel A8133 Full Mort/Std Wt/Plain Brg/5K 3 5PB1 NRP Steel A2133 Full Mort/Std Wt/Plain Brg/5K 3 5PB1 NRP Brass A5133 Full Mort/Std Wt/Plain Brg/5K 3 5PB1 NRP St. Steel A8133 Full Mort/Std Wt/Plain Brg/3K 3 3PB1 Steel A5133 Full Mort/Std Wt/Plain Brg/3K 3 3PB1 St. Steel Optional Model Suffixes: TW4 – 4 wire Electric Hinge TW8 – 8 wire Electric Hinge TW4M – 4 wire Electric Hinge with Monitor TW8M – 8 wire Electric Hinge with Monitor


16

McKINNEY PRODUCTS COMPANY

820 Davis Street Scranton, PA 18505

1-800-346-7707 www.mckinneyhinge.com

A156.1-2006 Butts and Hinges 9.1 Full Mortise Hinges ANSI McKinney Part # Hinge Type Grade Part # Base Material A5112 Full Mort/Std Wt/Brg/3K 2 TA314 Stainless Steel A5112 Full Mort/Std Wt/Brg/Hosp Type/3K 2 HTA314 Stainless Steel A5112 Full Mort/Std Wt/Brg/R Barrel/3K 2 RBTA314 Stainless Steel A5112 Full Mort/Std Wt/Brg/R Barrel/Beveled/3K 2 RBTA314 Stainless Steel A8112 Full Mort/Std Wt/Brg/3K 2 TA714 Steel A8112 Full Mort/Std Wt/Brg/Hosp Type/3K 2 HTA714 Steel A8112 Full Mort/Std Wt/Brg/R Barrel/3K 2 RBTA714 Steel A8112 Full Mort/Std Wt/Brg/R Barrel/Beveled/3K 2 RBTA714 Steel A8111 Full Mort/Hvy Wt/Brg/3K 1 TA786 Steel A8111 Full Mort/Hvy Wt/Brg/Hosp Type/3K 1 HTA786 Steel A8111 Full Mort/Hvy Wt/Brg/R Barrel/3K 1 RBTA786 Steel A8111 Full Mort/Hvy Wt/Brg/R Barrel/Beveled/3K 1 RBTA5786 Steel A5111 Full Mort/Hvy Wt/Brg/5K 1 T4A3386 Stainless Steel A5111 Full Mort/Hvy Wt/Brg/Hosp. Type/5K 1 HT4A3386 Stainless Steel A5111 Full Mort/Hvy Wt/Brg/R Barrel/5K 1 RBT4A3386 Stainless Steel A5111 Full Mort/Hvy Wt/Brg/R Barrel/Beveled/5K 1 RBT4A4386 Stainless Steel A8111 Full Mort/Hvy Wt/Brg/5K 1 T4A3786 Steel A5111 Full Mort/Hvy Wt/Brg/Wide Throw/5K 1 T4A3386WT Stainless Steel A8111 Full Mort/Hvy Wt/Brg/Wide Throw/5K 1 T4A3786WT Steel A8111 Full Mort/Hvy Wt/Brg/Hosp Type/5K 1 HT4A3786 Steel A8111 Full Mort/Hvy Wt/Brg/R Barrel/5K 1 RBT4A3786 Steel A8111 Full Mort/Hvy Wt/Brg/R Barrel/Beveled/5K 1 RBT4A4786 Steel A5112 Full Mort/Std Wt/Brg/5K 2 TA2314 Stainless Steel A5112 Full Mort/Std Wt/Brg/Hosp Type/5K 2 HTA2314 Stainless Steel A5112 Full Mort/Std Wt/Brg/R Barrel/5K 2 RBTA2314 Stainless Steel A5112 Full Mort/Std Wt/Brg/R Barrel/Beveled/5K 2 RBTA4314 Stainless Steel A8112 Full Mort/Std Wt/Brg/5K 2 TA2714 Steel A8112 Full Mort/Std Wt/Brg/Hosp Type/5K 2 HTA2714 Steel A8112 Full Mort/Std Wt/Brg/R Barrel/5K 2 RBTA2714 Steel A8112 Full Mort/Std Wt/Brg/R Barrel/Beveled/5K 2 RBTA4714 Steel

http://www.mckinneyhinge.com/�


17

9.1 Full Mortise Hinges (cont’d.) A5112 Full Mort/Std Wt/Brg/Wide Throw/5K 2 TA2398 Stainless Steel A8112 Full Mort/Std Wt/Brg/Wide Throw/5K 2 TA2798 Steel A5112 Full Mort/Std Wt/Brg/5K 2 TA3313 Stainless Steel A8112 Full Mort/Std Wt/Brg/5K 2 TA3713 Steel A8122 Full Mort/Hvy Wt/Brg/Sw Clear/3K 1 TA795 Steel A8122 Full Mort/Hvy Wt/Brg/Sw Clear/Beveled/3K 1 TA5795 Steel A5121 Full Mort/Hvy Wt/Brg/Sw Clear/5K 1 T4A3395 Stainless Steel A5121 Full Mort/Hvy Wt/Brg/Sw Clear/Beveled/5K 1 T4A4395 Stainless Steel A8122 Full Mort/Hvy Wt/Brg/Sw Clear/5K 1 T4A3795 Steel A8122 Full Mort/Hvy Wt/Brg/Sw Clear/Beveled/5K 1 T4A4795 Steel A5122 Full Mort/Std Wt/Brg/Sw Clear/5K 2 TA2395 Stainless Steel A5122 Full Mort/Std Wt/Brg/Sw Clear/Beveled/5K 2 TA4395 Stainless Steel A8122 Full Mort/Std Wt/Brg/Sw Clear/5K 2 TA2895 Steel A8122 Full Mort/Std Wt/Brg/Sw Clear/Beveled/5K 2 TA4895 Steel A8133 Full Mort/Std Wt/Plain Brg/5K 3 T2714 Steel 9.2 Full Mortise Slip In Type ANSI McKinney Part # Hinge Type Grade Part # Base Material A5142 Full Mort/Std Wt/Brg/Type 2/5K 2 TA2314 SI2 Stainless Steel A8142 Full Mort/Std Wt/Brg/Type 2/5K 2 TA2714 SI2 Steel A8143 Full Mort/Std Wt/Plain Brg/Type 2/5K 3 T2714 SI2 Steel A5142 Full Mort/Std Wt/Brg/Type 1/5K 2 TA2314 SI1 Stainless Steel A8152 Full Mort/Std Wt/Brg/Type 1/5K 2 TA2714 SI1 Steel A8153 Full Mort/Std Wt/Plain Brg/Type 1/5K 3 T2714 SI1 Steel 9.3 Half Mortise Hinges ANSI McKinney Part # Hinge Type Grade Part # Base Material A5212 Half Mort/Std Wt/Brg/3K 2 TA374 Stainless Steel A8212 Half Mort/Std Wt/Brg/3K 2 TA774 Steel A8211 Half Mort/Hvy Wt/Brg/3K 1 TA784 Steel A5211 Half Mort/Hvy Wt/Brg/5K 1 T4A3384 Stainless Steel A8211 Half Mort/Hvy Wt/Brg/5K 1 T4A3784 Steel A8213 Half Mort/Std Wt/Plain Brg/5K 3 T2774 Steel A5212 Half Mort/Std Wt/Brg/5K 2 TA2374 Stainless Steel A8212 Half Mort/Std Wt/Brg/5K 2 TA2774 Steel A8221 Half Mort/Hvy Wt/Brg/Sw Clear/3K 1 TA789 Steel A8221 Half Mort/Hvy Wt/Brg/Sw Clear/Beveled/3K 1 TA5789 Steel A8221 Half Mort/Hvy Wt/Brg/Sw Clear/5K 1 T4A3789 Steel A8221 Half Mort/Hvy Wt/Brg/Sw Clear/Beveled/5K 1 T4A4789 Steel


18

9.4 Full Surface Hinges ANSI McKinney Part # Hinge Type Grade Part # Base Material A5312 Full Surf/Std Wt/Brg/3K 2 TA371 Stainless Steel A8312 Full Surf/Std Wt/Brg/3K 2 TA771 Steel A5311 Full Surf/Hvy Wt/Brg/3K 1 TA381 Stainless Steel A8311 Full Surf/Hvy Wt/Brg/3K 1 TA781 Steel A5311 Full Surf/Hvy Wt/Brg/5K 1 T4A3381 Stainless Steel A8311 Full Surf/Hvy Wt/Brg/5K 1 T4A3781 Steel A5312 Full Surf/Std Wt/Brg/5K 2 TA2371 Stainless Steel A8312 Full Surf/Std Wt/Brg/5K 2 TA2771 Steel A8321 Full Surf/Hvy Wt/Brg/Sw Clear/3K 1 TA797 Steel A8321 Full Surf/Hvy Wt/Brg/Sw Clear/5K 1 TA3797 Steel A8361 Full Surf/Hvy Wt/Brg/Narrow Style/3K 1 TA781 Steel A5361 Full Surf/Hvy Wt/Brg/Narrow Style/5K 1 T4A3381 Stainless Steel A8361 Full Surf/Hvy Wt/Brg/Narrow Style/5K 1 T4A3781 Steel 9.5 Half Surface Hinges ANSI McKinney Part # Hinge Type Grade Part # Base Material A5412 Half Mort/Std Wt/Brg/3K 2 TA372 Stainless Steel A8412 Half Mort/Std Wt/Brg/3K 2 TA772 Steel A5411 Half Mort/Hvy Wt/Brg/3K 1 TA382 Stainless Steel A8411 Half Mort/Hvy Wt/Brg/3K 1 TA782 Steel A8411 Half Mort/Hvy Wt/Brg/5K 1 TA3782 Steel A5412 Half Mort/Std Wt/Brg/5K 2 TA2372 Stainless Steel A8412 Half Mort/Std Wt/Brg/5K 2 TA2772 Steel A8421 Half Mort/Hvy Wt/Brg/Sw Clear/3K 1 TA796 Steel A8421 Half Mort/Hvy Wt/Brg/Sw Clear/5K 1 TA3796 Steel A8433 Half Mort/Std Wt/Plain Brg/5K 3 T2772 Steel


19

9.6 Anchor Hinges & Hinge Sets ANSI McKinney Part # Hinge Type Grade Part # Base Material A5511 Anchor Hinge Set/Hvy Wt/Brg/Dr Leaf/3K 1 TA391 Stainless Steel A8511 Anchor Hinge Set/Hvy Wt/Brg/Dr Leaf/3K 1 TA791 Steel A5511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5391 Stainless Steel Dr Leaf/3K A8511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5791 Steel Dr Leaf/3K A5511 Anchor Hinge Set/Hvy Wt/Brg/Both Leaves/ 1 TA392 Stainless Steel Short J Leaf /3K A8511 Anchor Hinge Set/Hvy Wt/Brg/Both Leaves/ 1 TA792 Steel Short J Leaf /3K A5511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5392 Stainless Steel Both Leaves/Short J Leaf/3K A8511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5792 Steel Both Leaves/Short J Leaf/3K A5511 Anchor Hinge Set/Hvy Wt/Brg/J Leaf/3K 1 TA393 Stainless Steel A8511 Anchor Hinge Set/Hvy Wt/Brg/J Leaf/3K 1 TA793 Steel A5511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5393 Stainless Steel Dr Leaf/3K A8511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5793 Steel Dr Leaf/3K A5511 Anchor Hinge Set/Hvy Wt/Brg/Both Leaves/ 1 TA394 Stainless Steel Short D Leaf/3K A8511 Anchor Hinge Set/Hvy Wt/Brg/Both Leaves/ 1 TA794 Steel Short D Leaf/3K A5511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5394 Stainless Steel Both Leaves/Short D Leaf/3K A8511 Anchor Hinge Set/Hvy Wt/Brg/Beveled/ 1 TA5794 Steel Both Leaves/Short D Leaf/3K 9.9 Rescue Hardware ANSI McKinney Part # Hinge Type Grade Part # Base Material A2742 Standard Duty Double Acting Pivot 2 EP5-J Brass/Cast Iron A1882 Standard Duty Emergency Door Stop 2 DS-6 Brass A2882 Standard Duty Emergency Strike 2 DLS-8 Brass A1882 Standard Duty Emergency combination Strike & Stop 2 CSS-9 Brass


20

Stanley Security Solutions, Inc.

Commercial Hardware 6161 East 75th Street

Indianapolis, IN 46250 Phone: (800) 311-1705

www.stanleycommercialhardware.com

A156.1-2006 Butts & Hinges

9.1 Full Mortise Hinges ANSI part# hinge type grade Stanley part # base material A2111 Hvy Wgt/Ball Brg/5K 1 FBB199 Brass or Bronze A2111 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB199 Brass or Bronze A2111 Hvy Wgt/R-Barrel/Ball Brg/5K 1 RBFBB199 Brass or Bronze A2111 Hvy Wgt/R-Barrel/Ball BrgHosp Type/Ball Brg/5K 1 HTRBFBB199 Brass or Bronze A2111 Hvy Wgt/Concealed Brg/5K 1 CB199 Brass or Bronze A2111 Hvy Wgt/HospT ype/Concealed Brg/5K 1 HTCB199 Brass or Bronze A2111 Hvy Wgt/R-Barrel/Concealed Brg/5K 1 RBCB199 Brass or Bronze A2111 Hvy Wgt/R-Barrel/HospT ype/Concealed Brg/5K 1 HTRBCB199 Brass or Bronze A2111 Hvy Wgt/Concealed Brg/3K 1 CB1961R Brass or Bronze A2111 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1961R Brass or Bronze A2111 Hvy Wgt/R-Barrel/Concealed Brg/3K 1 RBCB1961R Brass or Bronze A2111 Hvy Wgt/R-Barrel/HospT ype/Concealed Brg/3K 1 HTRBCB1961R Brass or Bronze A5111 Hvy Wgt/Ball Brg/5K 1 FBB199 Stainless Steel A5111 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB199 Stainless Steel A5111 Hvy Wgt/R-Barrel/Ball Brg/5K 1 RBFBB199 Stainless Steel A5111 Hvy Wgt/R-Barrel/HospT ype/Ball Brg/5K 1 HTRBFBB199 Stainless Steel A5111 Hvy Wgt/Concealed Brg/5K 1 CB199 Stainless Steel A5111 Hvy Wgt/HospT ype/Concealed Bgr/5K 1 HTCB199 Stainless Steel A5111 Hvy Wgt/R-Barrel/Concealed Brg/5K 1 RBCB199 Stainless Steel A5111 Hvy Wgt/R-Barrel/HospT ype/Concealed Brg/5K 1 HTRBCB199 Stainless Steel A5111 Hvy Wgt/Concealed Brg/3K 1 CB1961R Stainless Steel A5111 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1961R Stainless Steel A5111 Hvy Wgt/R-Barrel/Concealed Brg/3K 1 RBCB1961R Stainless Steel A5111 Hvy Wgt/R-Barrel/HospT ype/Concealed Brg/3K 1 HTRBCB1961R Stainless Steel A8111 Hvy Wgt/Ball Brg/5K 1 FBB168 Steel A8111 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB168 Steel A8111 Hvy Wgt/R-Barrel/Ball Brg/5K 1 RBFBB168 Steel A8111 Hvy Wgt/R-Barrel/HospT ype/Ball Brg/5K 1 HTRBFBB168 Steel A2112 Std Wgt/Ball Brg/5K 2 FBB191 Brass or Bronze A2112 Std Wgt/Hosp Type/Ball Brg/5K 2 HTFBB191 Brass or Bronze A2112 Std Wgt/R-Barrel/Ball Brg/5K 2 RBFBB191 Brass or Bronze A2112 Std Wgt/R-Barrel/HospT ype/Ball Bgr/5K 2 HTRBFBB191 Brass or Bronze A2112 Std Wgt/Concealed Brg/5K 2 CB191 Brass or Bronze A2112 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB191 Brass or Bronze A2112 Std Wgt/R-Barrel/Concealed Brg/5K 2 RBCB191 Brass or Bronze


21

9.1 Full Mortise Hinges (continued) A2112 Std Wgt/R-Barrel/HospT ype/Concealed Brg/5K 2 HTRBCB191 Brass or Bronze A2112 Std Wgt/Concealed Brg/3K 2 CB1960R Brass or Bronze A2112 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1960R Brass or Bronze A2112 Std Wgt/R-Barrel/Concealed Brg/3K 2 RBCB1960R Brass or Bronze A2112 Std Wgt/R-Barrel/HospT ype/Concealed Brg/3K 2 HTRBCB1960R Brass or Bronze A5112 Std Wgt/Ball Brg/5K 2 FBB191 Stainless Steel A5112 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB191 Stainless Steel A5112 Std Wgt/R-Barrel/Ball Brg/5K 2 RBFBB191 Stainless Steel A5112 Std Wgt/R-Barrel/HospT ype/Ball Brg/5K 2 HTRBFBB191 Stainless Steel A5112 Std Wgt/Concealed Brg/5K 2 CB191 Stainless Steel A5112 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB191 Stainless Steel A5112 Std Wgt/R-Barrel/Concealed Brg/5K 2 RBCB191 Stainless Steel A5112 Std Wgt/R-Barrel/HospT ype/Concealed Brg/5K 2 HTRBCB191 Stainless Steel A5112 Std Wgt/Concealed Brg/3K 2 CB1960R Stainless Steel A5112 Std Wgt/HospT ype/Concealwd Brg/3K 2 HTCB1960R Stainless Steel A5112 Std Wgt/R-Barrel/Concealed Brg/3K 2 RBCB1960R Stainless Steel A5112 Std Wgt/R-Barrel/HospT ype/Concealed Brg/3K 2 HTRBCB1960R Stainless Steel A8112 Std Wgt/Ball Brg/5K 2 FBB179 Steel A8112 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB179 Steel A8112 Std Wgt/R-Barrel/Ball Brg/5K 2 RBFBB179 Steel A8112 Std Wgt/R-Barrel/HospT ype/Ball Brg/5K 2 HTRBFBB179 Steel A8112 Std Wgt/Concealed Brg/5K 2 CB179 Steel A8112 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB179 Steel A8112 Std Wgt/R-Barrel/Concealed Brg/5K 2 RBCB179 Steel A8112 Std Wgt/R-Barrel/HospT ype/Concealed Brg/5K 2 HTRBCB179 Steel A8122 Std Wgt/Ball Brg/Sq Door/5K/Swing Clear 2 FBB248 Steel A8122 Std Wgt/Ball Brg/Bev Door/5K/Swing Clear 2 FBB258 Steel A8122 Std Wgt/Concealed Brg/Sq Door/5K/Swing Clear 2 CB248 Steel A8122 Std Wgt/Concealed Brg/Bev Door/5K/Swing Clear 2 CB258 Steel A8122 Std Wgt/Concealed Brg/Sq Door/3K/Swing Clear 2 CB1947R Steel A8122 Std Wgt/Concealed Brg/Bev Door/3K/Swing Clear 2 CB1946R Steel A8123 Std Wgt/Plain Brg/Sq Door/5K/Swing Clear 3 F248 Steel A8123 Std Wgt/Plain Brg/Sq Door/5K/Swing Clear 3 1947R Steel A8133 Std Wgt/Plain Brg/5K 3 F179 Steel A8133 Std Wgt/HospT ype/Plain Brg/5K 3 HTF179 Steel A8133 Std Wgt/R-Barrel/Plain Brg/5K 3 RBF179 Steel A8133 Std Wgt/R-Barrel/HospT ype/Plain Brg/5K 3 HTRBF179 Steel A8133 Std Wgt/Plain Brg/3K 3 1900R Steel A8133 Std Wgt/HospT ype/Plain Brg/3K 3 HT1900R Steel A8133 Std Wgt/R-Barrel/Plain Brg/3K 3 RB1900R Steel A8133 Std Wgt/R-Barrel/HospT ype/Plain Brg/3K 3 HTRB1900R Steel


22

9.2 9.1 Full Mortise Hinges Slip-In ANSI part# hinge type grade Stanley part # base material A2152 Std Wgt/Ball Brg/One Leaf Taped/5K 2 FBB191Slip-In Application A Brass or Bronze A2152 Std Wgt/Concealed Brg/One Leaf Taped/5K 2 CB191Slip-In Application A Brass or Bronze A2152 Std Wgt/Concealed Brg/One Leaf Taped/3K 2 CB1960R Slip-In Application A Brass or Bronze A5152 Std Wgt/BallB rg/One LeafT aped/5K 2 FBB191Slip-In Application A Stainless Steel A5152 Std Wgt/Concealed Brg/One Leaf Taped/5K 2 CB191Slip-In Application A Stainless Steel A5152 Std Wgt/Concealed Brg/One Leaf Taped/3K 2 CB1960R Slip-In Application A Stainless Steel A8152 Std Wgt/Ball Brg/One Leaf Taped/5K 2 CB179 Slip-In Application A Steel A8152 Std Wgt/Ball Brg/One Leaf Taped/5K 2 FBB179 Slip-In Application A Steel A2142 Std Wgt/Ball Brg/Both Leaves Taped/5K 2 FBB191Slip-In Application B Brass or Bronze A2142 Std Wgt/Concealed Brg/ 2 CB191Slip-In Application B Brass or Bronze Both Leaves Taped/5K A2142 Std Wgt/Concealed Brg/ 2 CB1960RSlip-In Application B Brass or Bronze Both Leaves Taped/3K A5142 Std Wgt/BalBl rg/Both LeavesT aped/5K 2 FBB191Slip-In ApplicationB Stainless Steel A5142 Std Wgt/Concealed Brg/ 2 CB191Slip-In Application B Stainless Steel Both Leaves Taped/5K A5142 Std Wgt/Concealed Brg/ 2 CB1960R Slip-In Application B Stainless Steel Both Leaves Taped/3K A8142 Std Wgt/Ball Brg/Both Leaves Taped/5K 2 B179 Slip-In Application B Steel A8142 Std Wgt/Ball Brg/Both Leaves Taped/5K 2 FBB179 Slip-In Application B Steel 9.3 Half Mortise Hinges ANSI part# hinge type grade Stanley part # base material A2211 Hvy Wgt/Ball Brg/5K 1 FBB98 Brass or Bronze A2211 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB98 Brass or Bronze A2211 Hvy Wgt/Concealed Brg/5K 1 CB98 Brass or Bronze A2211 Hvy Wgt/HospT ype/Concealed Brg/5K 1 HTCB98 Brass or Bronze A2211 Hvy Wgt/Concealed Brg/3K 1 CB1981R Brass or Bronze A2211 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1981R Brass or Bronze A5211 Hvy Wgt/Ball Brg/5K 1 FBB98 Stainless Steel A5211 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB98 Stainless Steel A5211 Hvy Wgt/Concealed Brg/5K 1 CB98 Stainless Steel A5211 Hvy Wgt/HospT ype/Concealed Bgr/5K 1 HTCB98 Stainless Steel A5211 Hvy Wgt/Concealed Brg/3K 1 CB1981R Stainless Steel A5211 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1981R Stainless Steel A8211 Hvy Wgt/Ball Brg/5K 1 FBB138 Steel A8211 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB138 Steel A2212 Std Wgt/Ball Brg/5K 2 FBB108 Brass or Bronze A2212 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB108 Brass or Bronze A2212 Std Wgt/Concealed Brg/5K 2 CB108 Brass or Bronze A2212 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB108 Brass or Bronze A2212 Std Wgt/Concealed Brg/3K 2 CB1980R Brass or Bronze A2212 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1980R Brass or Bronze A5212 Std Wgt/Ball Brg/5K 2 FBB108 Stainless Steel A5212 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB108 Stainless Steel A5212 Std Wgt/Concealed Brg/5K 2 CB108 Stainless Steel A5212 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB108 Stainless Steel A5212 Std Wgt/Concealed Brg/3K 2 CB1980R Stainless Steel A5212 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1980R Stainless Steel A8212 Std Wgt/Ball Brg/5K 2 FBB167 Steel


23

9.3 Half Mortise Hinges (continued) A8212 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB167 Steel A8212 Std Wgt/Concealed Brg/5K 2 CB167 Steel A8212 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB167 Steel A8233 Std Wgt/Plain Brg/5K 3 F167 Steel A8233 Std Wgt/HospT ype/Plain Brg/5K 3 HTF167 Steel 9.4 Full Surface Hinges ANSI part# hinge type grade Stanley part # base material A2311 Hvy Wgt/Ball Brg/5K 1 FBB109 Brass or Bronze A2311 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB109 Brass or Bronze A2311 Hvy Wgt/Concealed Brg/5K 1 CB109 Brass or Bronze A2311 Hvy Wgt/HospT ype/Concealed Brg/5K 1 HTCB109 Brass or Bronze A2311 Hvy Wgt/Concealed Brg/3K 1 CB1991R Brass or Bronze A2311 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1991R Brass or Bronze A5311 Hvy Wgt/Ball Brg/5K 1 FBB109 Stainless Steel A5311 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB109 Stainless Steel A5311 Hvy Wgt/Concealed Brg/5K 1 CB109 Stainless Steel A5311 Hvy Wgt/HospT ype/Concealed Bgr/5K 1 HTCB109 Stainless Steel A5311 Hvy Wgt/Concealed Brg/3K 1 CB1991R Stainless Steel A5311 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1991R Stainless Steel A8311 Hvy Wgt/Ball Brg/5K 1 FBB169 Steel A8311 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB69 Steel A2312 Std Wgt/Concealed Brg/5K 2 CB110 Brass or Bronze A2312 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB110 Brass or Bronze A2312 Std Wgt/Concealed Brg/3K 2 CB1990R Brass or Bronze A2312 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1990R Brass or Bronze A5312 Std Wgt/Concealed Brg/5K 2 CB110 Stainless Steel A5312 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB110 Stainless Steel A5312 Std Wgt/Concealed Brg/3K 2 CB1990R Stainless Steel A5312 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1990R Stainless Steel A8312 Std Wgt/Ball Brg/5K 2 FBB171 Steel A8312 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB171 Steel A8312 Std Wgt/Concealed Brg/5K 2 CB171 Steel A8312 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB171 Steel


24

9.5 Half Surface Hinges ANSI part# hinge type grade Stanley part # base material A2411 Hvy Wgt/Ball Brg/5K 1 FBB113 Brass or Bronze A2411 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB113 Brass or Bronze A2411 Hvy Wgt/Concealed Brg/5K 1 CB113 Brass or Bronze A2411 Hvy Wgt/HospT ype/Concealed Brg/5K 1 HTCB113 Brass or Bronze A2411 Hvy Wgt/Concealed Brg/3K 1 CB1971R Brass or Bronze A2411 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1971R Brass or Bronze A5411 Hvy Wgt/Ball Brg/5K 1 FBB113 Stainless Steel A5411 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB113 Stainless Steel A5411 Hvy Wgt/Concealed Brg/5K 1 CB113 Stainless Steel A5411 Hvy Wgt/HospT ype/Concealed Bgr/5K 1 HTCB113 Stainless Steel A5411 Hvy Wgt/Concealed Brg/3K 1 CB1971R Stainless Steel A5411 Hvy Wgt/HospT ype/Concealed Brg/3K 1 HTCB1971R Stainless Steel A8411 Hvy Wgt/Ball Brg/5K 1 FBB163 Steel A8411 Hvy Wgt/HospT ype/Ball Brg/5K 1 HTFBB63 Steel A2412 Std Wgt/Ball Brg/5K 2 FBB112 Brass or Bronze A2412 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB112 Brass or Bronze A2412 Std Wgt/Concealed Brg/5K 2 CB112 Brass or Bronze A2412 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB112 Brass or Bronze A2412 Std Wgt/Concealed Brg/3K 2 CB1970R Brass or Bronze A2412 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1970R Brass or Bronze A5412 Std Wgt/Ball Brg/5K 2 FBB112 Stainless Steel A5412 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB112 Stainless Steel A5412 Std Wgt/Concealed Brg/5K 2 CB112 Stainless Steel A5412 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB112 Stainless Steel A5412 Std Wgt/Concealed Brg/3K 2 CB1970R Stainless Steel A5412 Std Wgt/HospT ype/Concealed Brg/3K 2 HTCB1970R Stainless Steel A8412 Std Wgt/Ball Brg/5K 2 FBB173 Steel A8412 Std Wgt/HospT ype/Ball Brg/5K 2 HTFBB173 Steel A8412 Std Wgt/Concealed Brg/5K 2 CB173 Steel A8412 Std Wgt/HospT ype/Concealed Brg/5K 2 HTCB173 Steel

Locks and Latches

ANSI/BHMA A156.2

2009 DIRECTORY

Locks and Latches


26

GENERAL INFORMATION DESCRIPTION AND FUNCTION NUMBERS OF SERIES 2000 PRE-ASSEMBLED LOCKS AND LATCHES (FROM A156.2) F36 Passage or Closet Latch Set. Latch bolt operated by lever or knob from either side at all times. F37 Privacy, Bedroom or Bath Lock. Latch bolt operated by lever or knob from either side. Outside lever or knob is locked by push button inside and unlocked by emergency release outside, operating inside lever or knob, or closing door. F38 Patio or Privacy Lock. Latch bolt operated by lever or knob from either side. Outside lever or knob is locked by push button inside and unlocked by operating inside lever or knob or closing door. Auxiliary dead latch. Do not use on doors in rooms that have no other entrance. F39 Communicating Lock. Latch bolt operated by lever or knob from either side. Turn button, in either lever or knob, locks or unlocks opposite lever or knob. Auxiliary dead latch. Do not use on doors in rooms that have no other entrance. F40 Entrance or Store Room Lock. Latch bolt is operated by lever or knob from either side except when outside lever or knob is locked by turn button in inside lever or knob. When outside lever or knob is locked, latch bolt is retracted by key from outside or by operating inside lever or knob. Turn button shall be manually rotated to unlock outside lever or knob. Auxiliary dead latch. F41 Entry Lock. Latch bolt operated by lever or knob from either side except when outside lever or knob is locked by push button in inside lever or knob. When outside lever or knob is locked, operating key from outside or operating inside lever or knob retracts latch bolt and releases push button. Closing door does not release push button. Auxiliary dead latch. F42 Classroom Lock. Latch bolt operated by lever or knob from either side except when outside lever or knob is locked from outside by key. When outside lever or knob is locked, latch bolt is retracted by key from outside or operating inside lever or knob. Auxiliary dead latch. F43 Holdback Lock. Latch bolt operated by lever or knob from either side except when outside lever or knob is locked from outside by key. Latch bolt is locked in a retracted position by key. When outside lever or knob is locked, latch bolt is retracted by key from outside or by operating inside lever or knob, unless latch bolt has been locked in a retracted position. Auxiliary dead latch. F44 Store Room or Closet Lock. Latch bolt operated by key from outside or by operating inside lever or knob. Outside lever or knob is always fixed. Auxiliary dead latch. F45 Apartment, Exit or Public Toilet Lock. Latch bolt operated by lever or knob from either side except when outside lever or knob is locked by key from inside. When outside lever or knob is locked, latch bolt is retracted by key from outside or by operating inside lever or knob. Auxiliary dead latch. F46 Store Door Lock. Latch bolt operated by lever or knob from either side except when both levers or knobs are locked by key from either side. Auxiliary dead latch.


27

F47 Store Door Lock. Latch bolt operated by lever or knob from either side. Dead bolt operated by key from either side. F48 Hotel Guest Room, Club House, Dormitory or Apartment Entrance Lock. Latch bolt operated by lever or knob from inside at all times. Outside lever or knob always fixed. Latch bolt operated by key from outside except when push button inside is depressed, thus shutting out all keys except the emergency key. Depressing push button operates visual indicator in face of cylinder showing the room is occupied. Operating inside lever or knob, or closing door releases indicator and shut out feature except when shut out is activated by a special procedure which shuts out all keys except emergency keys. Auxiliary dead latch. DESCRIPTION AND FUNCTION NUMBERS OF SERIES 4000 BORED LOCKS AND LATCHES (FROM A156.2) F75 Grades 1, 2 and 3. Passage or Closet Latch Latch bolt operated by lever, from either side at all times. F76A Grades 1 and 2. Privacy, Bedroom or Bath Lock Latch bolt operated by lever from either side. Outside lever is locked by push button or other locking device inside and unlocked by emergency release outside, operating inside lever or closing door. F76B Grades 2 and 3. Privacy, Bedroom or Bath Lock. Latch bolt operated by lever from either side except when outside lever is locked by locking device inside. Locking device shall automatically release when inside lever is operated or be in unlocked position before inside lever is operated. Emergency release on outside shall permit outside lever to operate latch bolt. F77A Grades 1 and 2. Patio or Privacy Lock. Dead locking latch bolt operated by lever from either side. Outside lever is locked by push button or other locking device inside and unlocked by operating inside lever or closing door. Do not use on doors in rooms that have no other entrance. F77B Grades 2 and 3. Patio and Privacy Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by locking device inside. Locking device shall automatically release when inside lever is operated or be in the unlocked position before the lever is operated. Do not use on doors in rooms that have no other entrance. F78 Grades 1 and 2. Communicating Lock. Dead locking latch bolt operated by lever from either side. Turn button or locking device on either side locks or unlocks opposite lever. Do not use on doors in rooms that have no other entrance. F79 Grades 1 and 2. Communicating Lock. Dead locking latch bolt operated from inside by lever and from outside by thumb turn. Turning button or operating locking device in inside lever locks both lever and thumb turn. Turn button or other locking device does not release unless manually restored to unlocked position. F80 Grades 1 and 2. Communicating Lock. Dead locking latch bolt operated by lever from either side. Turning key in either lever locks or unlocks its own lever independently. Do not use on doors in rooms that have no other entrance.


28

F81 Grades 1, 2 and 3. Entry Lock. Deadlocking latch bolt operated by lever from either side except when outside lever is locked by turn button or other locking device inside. When outside lever is locked, latch bolt is operated by key in outside lever or by operating inside lever. Turn button or other locking device shall be manually operated to unlock outside lever. At the option of the individual manufacturer, operating the key in the outside lever shall permit the latch bolt to be retracted by operating the outside lever, providing the key cannot be removed in the unlocked position. F82A Grades 1 and 2. Entry Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by push button or other locking device on inside. When outside lever is locked, operating key in outside lever or operating inside lever unlocks push button or other locking device and retracts latch bolt. Closing door does not release push button or other locking device. F82B Grades 2 and 3. Entry Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by locking device on inside. When outside lever is locked, operating key in outside lever unlocks locking device. Locking device shall automatically release when inside lever is operated or be in the unlocked position before inside lever is operated. F83 Grades 1, 2 and 3. Exit Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by turn button or other locking device in inside. Turn button or other locking device shall be manually operated to unlock outside lever. Inside lever always operates latch bolt. F84 Grades 1 and 2. Classroom Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked from outside by key. At the option of the individual manufacturer, operating the key in the lever shall permit the latch bolt to be retracted. When outside lever is locked, latch bolt is operated by inside lever. F85 Grade 1. Holdback Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked from outside by key. Latch bolt is locked in a retracted position by key. When outside lever is locked, latch bolt is retracted by key from outside or by operating inside lever unless latch bolt has been locked in a retracted position. F86 Grades 1, 2 and 3. Store Room or Closet Lock. Dead locking latch bolt operated by key in outside lever, or by operating inside lever. Outside lever is always inoperable. At the option of the individual manufacturer, operating the key in the outside lever shall permit the latch bolt to be retracted by operating the outside lever, providing the key cannot be removed in the unlocked position. F87 Grade 1. Utility, Asylum or Institutional Lock. Dead locking latch bolt operated by key in lever, from either side. Both levers always inoperable. At the option of the individual manufacturer, operating the key in the outside lever shall permit the latch bolt to be retracted by operating either the inside or outside lever, providing the key cannot be removed in the unlocked position. F88 Grade 1. Apartment, Exit or Public Toilet Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by key from inside. When outside lever is locked, latch bolt is retracted by key in outside lever or by operating inside lever.


29

F89 Grades 1, 2 and 3. Exit Latch. Deadlocking latch bolt retracted by lever from inside at all times. Outside lever is always inoperable. F90 Grades 1 and 2. Corridor Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by key in outside lever or by push button or other locking device on inside. Key in outside lever locks or unlocks outside lever. Operating inside lever releases push button or other locking device placed in a locked position. Closing door releases push button or other inside locking device. Inside lever always operates latch bolt. F91 Grade 1. Store Door Lock. Dead locking latch bolt operated by lever from either side except when both levers are locked by key from either side. F92 Grades 1 and 2. Service Station Lock. Dead locking latch bolt operated by lever from either side except when outside lever is locked by push button or other locking device inside. Key outside, operating inside lever or closing door releases push button or other locking device unlocking outside lever except when slotted push button or other locking device is in a locked position. Inside lever always operates latch bolt. F93 Grades 1 and 2. Hotel Guest Room, Club House, Dormitory or Apartment Entrance Lock. Dead locking latch bolt operated by lever from inside at all times. Outside lever always inoperable. Latch bolt operated by key from outside except when push button or other locking device inside is operated thus shutting out all keys except emergency key. Operating push button or other locking device operates outside visual indicator showing room is occupied. Operating inside lever or closing door releases indicator and shut out feature except when shut out is activated by a special procedure which shuts out all keys except emergency or display key. At the option of the individual manufacturer, operating the key in the outside lever shall permit the latch bolt to be retracted by operating the outside lever, providing the key cannot be removed in the unlocked position. F94 Grades 1, 2, and 3 Entry Handleset. Dead locking latch bolt operated by thumb piece from outside and lever from inside except when outside thumb piece is locked by push button or other locking device on inside. When outside thumb piece is locked, operating key in outside cylinder or operating inside lever retracts latch bolt. Closing door does not release push button or other locking device. F107 Grade 1. Entry Handleset. Deadlocking latch bolt operated by thumb piece from outside and lever from inside except when outside thumb piece is locked by push button or other locking device on inside. When outside thumb piece is locked, operating key in outside cylinder or operating inside lever unlocks push button or other locking device and retracts latch bolt. Closing door does not release push button or other locking device. F108 Grades 2 and 3. Entry Handleset. Deadlocking latch bolt operated by thumb piece from outside and lever from inside except when outside thumb piece is locked by locking device on inside. When outside thumb piece is locked, operating key in outside cylinder unlocks locking device. Locking device shall automatically release when inside lever is operated or be in the unlocked position before inside lever is operated.


30

F109 Grades 1, 2, and 3. Combined F81 and F82 Entry Lock. Deadlocking latch bolt operated by lever from either side except when outside lever is locked by the push or turn button inside. Key outside or operating inside lever releases push or turn button unlocking outside lever except when push or turn button has been rotated to keep outside lever locked. Inside push or turn button must be manually operated to unlock outside lever . Inside lever always operates latch bolt. F110 Grade 1. Intruder Classroom Lock Deadlocking latch bolt operated by lever from either side. Key either inside or outside locks or unlocks outside lever. Inside lever always operates latchbolt. F111 Grades 1 and 2. Communicating Passage Lock Dead locking latch bolt operated by lever one side only at all times. Non removable blank trim or no trim outside. F112 Grades 1 and 2. Communicating Storeroom Lock Deadlocking latch bolt operated by key in lever one side only. Lever always inoperable. At the option of the individual manufacturer, operating the key in the lever shall permit the latch bolt to be retracted by operating the lever, providing the key cannot be removed in the unlocked position. Non removable blank trim or no trim outside. F113 Grades 1 and 2. Communicating Classroom Lock Dead locking latch bolt operated by lever one side only

except when lever is locked by key. At the option of the individual manufacturer, operating the key in the lever shall permit the latch bolt to be retracted. Non removable blank trim or no trim outside.


31

LOCK MANUFACTURING COMPANY INC

100 SARGENT DRIVE NEW HAVEN, CT 06511

800-839-3157

CERTIFIED LOCKS AND LATCHES A156.2

Series 4000 – Bored

ANSI Function Number Licensee’s Catalog Designation

Grade 1 Grade 2

F75 GL01, H01, S01, W01, MK01, ML01, RK01, RL01 Q01 MP01, L01 F76 GL02, H02, S02, W02, MK02, ML02, RK02, RL02 W72, Q02, Q72, MP02, M72, ML06, W06, W76, Q06, Q76 ML76, L02 F77 H04, S04 MK04, MP04 F78 H05 F80 H31, W31, W91, MK31, ML31, Q31, Q91 ML91 F109 GL81, H11, S11, W11, ML11, MK11, RK11, RL11 W81, Q11, Q81 ML81, L11 H13, S13, W13, MK13, ML13, W83, Q13, Q83 ML83, L13 F84 GL87, H17, S17, W17, MK17, ML17, RK17, RL17 W87, Q17, Q87 ML87, L17 F85 H20 F86 GL82, H12, S12, W12, MK12, ML12, RK12, RL12 W82, Q12, Q82 ML82, L12 F87 H33, S33, W33 MK33, ML33, W93, Q33, Q93 ML93 F88 H32, S32, W32, MK32, ML32, W92, Q32, Q92 ML92 F89 H07, W07, Q07, ML07, ML77 S07, W77, Q77 F90 H19, S19, W19, Q19, W89, Q89 F91 H35, S35, W35, ML35, ML95 W95, Q35, Q95 F92 H14, W14, W84 MK14, ML14, Q14, Q84 ML84 F93 H15, W15, Q15 MK15, ML15 F110 GL97


32

Arrow Lock Manufacturing – Series 4000 continued Note: Interchangeable Core (IC) option also applicable for all keyed functions listed. (except for L Series) CERTIFIED FINISHES FINISH TYPE LICENSEE’S SYMBOL (s) Brass with a clear organic coating US3, US4 Bronze with a clear organic coating US9, US10 Chrome over brass or bronze US26, US26D Stainless Steel 300 series US32, US32D Brass with a clear organic coating over zinc or steel US3, US4 Copper-Nickel-Chrome over zinc or steel US26, US26D


33

STANLEY SECURITY SOLUTIONS BEST ACCESS SYSTEMS DIVISION

6161 East 75th Street Indianapolis, IN 46250

Phone: (317) 849-2250 Fax: (317) 806-3528 www.bestaccess.com

CERTIFIED LOCKS AND LATCHES A156.2 – 1996


ANSI Function Licensee’s Catalog Designations Numbers

CERTIFIED FOR OPERATIONAL GRADES: Grade 1 Grade 2 F75 8K_N, 9K_N 5K_N, 6K_N, 7KC_N F76 8_L, 9K_L 5K_L, 6K_L, 7KC_L F77 8K_P, 9K_P 6K_P F78 8K_M, 9K_M F80 8K_S, 9K_S F81 8K_A, 9K_A 5K_A F82 8K_B, 9K_B F83 8K_Q, 9K_Q F84 8K_R, 9K_R 5K_R, 6K_R, 7KC_R F86 8K_D, 9K_D 5K_D, 6K_D, 7KC_D F87 8K_W, 9K_W F88 8K_C, 9K_C F89 8K_NX, 9K_NX F90 85K_T, 9K_T F91 8K_G F92 8K_E, 9K_E 6K_E F93 8K_H, 9K_H F109 8K_AB, 9K_AB 6K_AB, 7KC_AB

http://www.bestaccess.com/�


34

Cal-Royal Products, Inc.

A156.2 2008 Bored and Preassembled Lock Series 4000-Bored ANSI FUNCTION # DESIGNATION LICENSEES FUNTION # LICENSEES CATALOG GRADE 1 LEVERS F81, f82 00-Entrance CGN00/GRB00 F84 03-Classroom CGN03/GRB03 F86 05-Storeroom CGN05/GRB05 F76 20-Privacy CGN20/GRB20 F75 30-Passage CGN30/GRB30 F75 40-Single Dummy CGN40/GRB40 F91 02-Store Lock CGN02/GRB02 F91 04-Communicatiing CGN04/GRB04 F91 06-Vestibule CGN06/GRB06 F91 07-Classroom/Intruder CGN07/GRB07 F91 09-Institution CGN09/GRB09 GRADE 2 BALL KNOBS F82 Entry BA00 F92 Store Lock BA02 F84 Classroom BA03 F79 Communicating BA04 F86 Store Room BA05 F75 Vestibule BA06 F92 Service Station Lock BA07 F90 Corridor BA08 F79 Institution BA09 F77 Patio BA10 F76 Privacy BA20 F75 Passage BA30 F75 Dummy BA40 F89 Exit BA50

6605 Flotilla St., Commerce, California 90040 U.S.A. Phone: (323) 888-6601 Fax: (323) 888-6699 Email: [email protected] Website: www.cal-royal.com

mailto:[email protected]�


35

CORBIN RUSSWIN , INC.

255 EPISCOPAL ROAD BERLIN, CT 06037

(860) 225-7411

CERTIFIED LOCKS & LATCHES ANSI/BHMA A156.2 – 2003

GRADE 1 GRADE 2

ANSI Function Number F75 CL3310, CL3510, CL3610, CK4210 CL3710, CL3810, CL3910, CK4410, CK4710, SL3210 F76 CL3320, CL3520, CL3620, CK4220 CL3720, CL3820, CL3920, CK4720, SL3220 F76 CK4230 CK4430 F77 CL3340 CL3840, CL3940, CK4440 F80 CL3362 CL3862, CL3962 F81 CK4251 CL3751, CK4751, SL3251 F109 CL3351, CL3551, CL3651 CL3851, CL3951, CK4451 F82 CL3361, CL3561, CL3661, CK4261 CL3861 F84 CL3355, CL3555, CL3655, CK4255 CL3755, CL3855, CL3955, CK4455, CK4755, SL3255 F86 CL3357, CL3557, CL3657, CK4257 CL3759, CL3857, CL3957, CK4457, CK4759, SL3259 F87 CL3332, CK4232 F88 CL3372, CL3672, CK4272 CL3872 F91 CL3582, CL3682, CK4282 CK4482 F92 CL3393 CL3893 F93 CL3329, CL3629, CK4229 CK4429 F110 CL3352

CERTIFIED FINISHES

Finish Type (ANSI/BHMA): Licensee’s Symbol(s) Bright brass, clear coated 605 Satin brass, clear coated 606 Bright bronze, clear coated 611 Satin bronze, clear coated 612 Dark oxidized satin bronze, oil rubbed 613 Bright chrome plated 625 Satin chrome plated 626 Bright stainless steel 629 Satin stainless steel 630


36

DORMA Architectural Hardware

Dorma Drive, Reamstown, PA 17567 717-336-3881

www.dorma-usa.com

CERTIFIED LOCKS & LATCHES A156.2 – 2003


ANSI Licensee’s Catalog Designations Function Number GRADE 1 GRADE 2 F75 CL810, CK810 CL710, CK710, CL610, CK610,

C410 F76A CL840, CK840 CL740, CK740 F76B CL640, CK640, C440 F77A CL830, CK830 CL730, CK730 F80 CL872, CK872 F81 CL651, CK651 F82A CL850 CL750 F84 CL870, CK870 CL770, CK770, CL670, CK670 F86 CL880, CK880 CL780, CK780, CL680, CK680 F87 CL882, CK882 F88 CL860 CK860 F90 CL873, CK873 F93 CL885 F109 CL853, CK853 CL753, CK753 F110 CL877 F111 CL825 CL725

CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol(s) Bright Brass, Clear Coated 605 Satin Brass, Clear Coated 606 Satin Bronze, Clear Coated 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Satin Nickel Plated, Clear Coated 619 Bright Chrome Plated 625 Satin Chrome Plated 626 Bright Stainless Steel 629 Satin Stainless Steel 630

http://www.dorma-usa.com/�


37


A156.2 – 2003 GRADE 2 CYLINDRICAL LOCKSETS

ANSI PART #

HINGE GRADE GSH #

A156.2 5304 Cylindrical Locksets; Office 2 GSH5304 A156.2 5301 Cylindrical Locksets; Passage 2 GSH5301

A156.2 5305 Cylindrical Locksets;

Classroom 2 GSH5305

A156.2 5307 Cylindrical Locksets; Storeroom 2 GSH5307 A156.2 5322 Cylindrical Locksets; Privacy 2 GSH5322 VERIFICATION REPORT NUMBERS: GZ08070287-1 GZ08070287-1 GZ08070287-3 SUBSECTION TEST DESCRIPTION RESULT 9.0 Operational Test Compliant 10.0 Strength Test Compliant 11.0 Cycle Test Compliant 12.0 Security Test Compliant 13.0 Material Evaluation Test Compliant


38

FALCON IR Security Technologies

2315 Briargate Parkway, Suite 700 Colorado Springs, CO 80920

(800) 266-4456

CERTIFIED LOCKS & LATCHES A156.2-2003

Series 2000 - PREASSEMBLED ANSI Function Licensee’s Catalog Designations Numbers Grade 1 Grade 2 F36 RU101 F37 RU301 F40 RU521 F40/41 RU511 F41 RU501 F42 RU561 F44 RU581 F45 RU381 F48 RU571

CERTIFIED FINISHES

Finish Type Licensee’s Symbols Brass with a Clear Organic Coating 605, 606 Bronze with a Clear Organic Coating 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Chrome over Brass or Bronze 625, 626


39



(800) 266-4456


Series 4000 - BORED ANSI Function Licensee’s Catalog Designations Numbers Grade 1 Grade 2 F75 T101, X101 B101, Y101, W101 F76 T301, X301 B301, Y301, W301 F77A W201 F81 T521, X521 Y521 F82 T501, X501 B501, W501 F84 T561, X561 B561, Y561, W561 F86 T581, X581 B581, Y581, W581 F87 T411, X411 F88 T381 F90 T571, X571 B611 F109 T511, X511 B511, W511 F111 B161, W161 F112 B341

CERTIFIED FINISHES

Finish Type Licensee’s Symbols Brass with a Clear Organic Coating 605, 606 Bronze with a Clear Organic Coating 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 629, 630


40

A156.2 – 2003 GRADE 2 CYLINDRICAL LOCKSETS

ANSI PART

#

HINGE GRADE GSH #

A156.2 5304 Cylindrical Locksets; Office 2 GSH5304 A156.2 5301 Cylindrical Locksets; Passage 2 GSH5301


Classroom 2 GSH5305


Storeroom 2 GSH5307

A156.2 5322 Cylindrical Locksets; Privacy 2 GSH5322 VERIFICATION REPORT NUMBERS: GZ08070287-1 GZ08070287-1 GZ08070287-3 SUBSECTION TEST DESCRIPTION RESULT 9.0 Operational Test Compliant 10.0 Strength Test Compliant 11.0 Cycle Test Compliant 12.0 Security Test Compliant 13.0 Material Evaluation Test Compliant


41


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.2 2003

Bored and Preassembled Locks and Latches SERIES 4000 - BORED ANSI Licensee’s Licensee’s Catalog Designation Function Function Number Number Grade 1 Grade 2 F75 10 3410 3510, 3610 F76A 40 3440 3540 F76B 40 -- 3640 F82 50 3450 3550 F84 70 3470 3570, 3670 F86 80 3480 3580, 3680 F90 73 3473 3573 F109 53 3453 3553, 3653 F110 95 3495 -- F111 25 -- 3525 F113 79 -- 3579


42

A BLACK & DECKER COMPANY

19701 Da Vinci, Lake Forest, CA 92610 (949) 672-4000 www.k2commericalhardware.com

CERTIFIED BORED & PREASSEMBLED LOCKS & LATCHES

A156.2-2003

Series 4000

Licensee’s Catalog Designations

ANSI Function Numbers Grade 1 Grade 2 F75 QCL-130 QCL-230 QTL-230 F76 QCL-140 QCL-240 QTL-240 F82 QTL-250 QTL-251 (IC) F84 QCL-160 QCL-260 QCL-161 (IC) QCL-261 (IC) QTL-260 QTL-261 (IC) F86 QCL-170 QCL-270 QCL-171 (IC) QCL-271 (IC) QTL-270 QTL-271 (IC) F109 QCL-150 QCL-250 (IC) QCL-151 (IC) QCL-251 (IC) F111 QCL-135 QCL-235 (* IC Interchangeable core)


43

K2 A156.2-2003 (continued)

CERTIFIED FINISHES Finish Type BHMA Code Licensee’s Symbol Bright Brass with a Clear Organic Coating 605 3 Bright Brass plated on Steel with a Clear 632 3 Organic Coating Bright Brass plated on Zinc with a 677 3 Clear Organic Coating Bright Brass Anodized Aluminum 707 3 Black Nickel plated, satin relieved, on Brass, Steel or Zinc 609, 609E 5 with a Clear Organic Coating Oxidized Satin Bronze, Appearance Equivalent 613E (704, 727) 10B Satin nickel plated, Clear Coated 619, 619E 15 on Brass, Steel or Zinc Satin nickel plated, blackened, satin relieved 647 15A on Steel with a Clear Organic Coating Chrome on Nickel on Brass 625, 626 26, 26D Chrome on Nickel on Steel 651 26 Chrome on Nickel on Zinc 681, 682 26, 26D


44

Kaba Ilco Corporation 2941 Indiana Avenue

Winston Salem, NC 27105 (336) 725-1331

www.kaba-ilco.com

CERTIFIED LOCKS AND LATCHES

A156.2 BORED & PREASSEMBLED LOCKS & LATCHES Series 4000 - Bored

ANSI Function Licensee’s Catalog Description Grade 1 F81 Series 5000 F81, F86 Series E5000, E5200, E5700

CERTIFIED FINISHES Chrome over Zinc 626E (26D) Bright Chrome over Zinc 625E (25) Satin Brass over Zinc 606E (04) Bright Brass over Zinc 605E (03) Black 676 Duranodic - Dark Bronze 695

ANSI Function Licensee’s Catalog Description Grade 1 F86 PowerLever Series: 1550S, 1550I 4550S, 4550I 4560S, 4560I 9550S, 9550I

CERTIFIED FINISHES Black-Wrinkle Polyester Powder Coat over E-coat BL Satin Chrome 626E (26D)


45

Kaba Ilco Corporation (Continued)


A156.2 1996 BORED & PREASSEMBLED LOCKS & LATCHES Series 4000 – Bored

ANSI Function Licensee’s Catalog Description Grade 1

F36 4000 / 4400 Series F44 4000 / 4400 Series F75 4000 / 4400 Series F81 4000 / 4400 Series

Note: 4000 / 4400 series with ½” latch with 2 3/4” backset

CERTIFIED FINISHES

Finish Type Licensee’s Symbol

Chrome over Zinc 626E (26D)


46


19701 Da Vinci, Lake Forest, CA 92610 (949) 672-4000 www.kwikset.com

CERTIFIED BORED & PREASSEMBLED LOCKS & LATCHES

A156.2-2003

Series 4000 Licensee’s Catalog Designations

ANSI Function Numbers Grade 2 Grade 3 F75 720, 725 200 (Knobs) 200* & 420* (*Levers) SK1000, SK1002 ** SL 1000, SL1002 ** F76 730, 735 300 (Knobs) 300* & 430* (*Levers) SK3000 ** SL 3000 ** F77 100 F81 741, 746 401 406* & 413* (*Levers) F82 740, 745 400 (Knobs) 405* & 409* (*Levers) SK 5000, SK5002 ** 400DL, 400DNL (Knob x Lever) SL 5000, SL 5002 ** 410 (Knob x Lever) F84 744, 749 F86 750, 755 450 (Knobs) 412* & 462* (*Levers) F94 552, 553, 554

** SafeLock Brand by Black & Decker


47

Kwikset A156.2-2003 (continued)

CERTIFIED FINISHES Finish Type BHMA Code Licensee’s Symbol Bright Brass with a Clear Organic Coating 605 3 Bright Brass plated on Steel with a Clear 632 3 Organic Coating Bright Brass plated on Zinc with a 677 3 Clear Organic Coating Bright Brass Anodized Aluminum 707 3 Bright Brass, Inorganic Coated 605E LO3 (Physical Vapor Deposition – PVD) Base Material: Brass Black Nickel plated, satin relieved, on Brass, Steel or Zinc 609, 609E 5 with a Clear Organic Coating Oxidized Satin Bronze, Appearance Equivalent 613E (704, 727) 10B Venetian Bronze, Clear Organic Coated Appearance Equivalent 616E 11P Satin nickel plated, Clear Coated 619, 619E 15 on Brass, Steel or Zinc Satin nickel plated, blackened, satin relieved 620, 620E 15A on Brass or Zinc with a Clear Organic Coating Satin nickel plated, blackened, satin relieved 647 15A on Steel with a Clear Organic Coating Chrome on Nickel on Brass 625, 626 26, 26D Chrome on Nickel on Steel 651 26 Chrome on Nickel on Zinc 681, 682 26, 26D


48


49


50


51

PDQ Manufacturing PO Box 507

2754 Creek Hill Road Leola, PA 17540 1-800-441-9692

www.pdqlocks.com



ANSI Licensee’s Catalog Designations Function Grade 1 Grade 1 Grade 2 Grade 2 Grade 2 Number XGT Series GT Series GP Series SA Series SD Series F75 GT126 GP126 SA126 SD126 F76 GT176 GP176 SA176 SD176 F77 GT177 F80 XGT141 GT141 F81 XGT116 GT116 GP116 SA116 SD116 F82 XGT182 GT182 GP182 SA182 F84 XGT148 GT148 GP148 SA148 SD148 F86 XGT115 GT115 GP115 SA115 SD115 F87 XGT128 GT128 F88 XGT135 GT135 F89 GT124 F90 XGT165 GT165 F91 XGT137 GT137 GP137 F92 XGT155 GT155 F111 GT125 GP125 SA125 F112 GT129 F113 GT150 GP150

CERTIFIED FINISHES Finish Type ANSI Designation Licensee’s Symbols Bright Brass 605, 605E (677) US3

Satin Brass 606, 606E (678) US4 Satin Bronze 612, 612E (726, 679) US10

Oxidized Satin Bronze 613E (704, 727) US10B Bright Chrome over Nickel 625, 625E (681) US26 Satin Chrome over Nickel 626, 626E (682) US26D


52

SARGENT MANUFACTURING COMPANY 100 SARGENT DRIVE

NEW HAVEN, CT 06511 203/562-2151

CERTIFIED LOCKS & LATCHES

A156.2 2003

Series 4000 - Bored ANSI Function Numbers Licensee’s Catalog Designations Grade 1 Grade 2 F75 10U15, 9U15, 8U15, 11U15 7U15, 6U15, 65U15 B2321, B2328, B6521, B3221, 23U15, 55U15 F76 10U65, 9U65, 8U65, 11U65 7U65, 6U65, 65U65 B2331, B2338, B6531, B3231, 23U65, 55U65 F79 6G75-2 F80 10G30, 9G30, 8G30, 11G30 F81 10G05, 9G05, 8G05, 11G05 7G05, 6G05, 65G05 B2311, B2318, B6511, B3211, 23G05, 55GO5

Series 4000 - Bored ANSI Function Numbers Licensee’s Catalog Designations Grade 1 Grade 2 F82 10G24, 9G24, 8G24, 11G24 6G24 F84 10G37, 9G37, 8G37, 11G37 7G37, 6G37, 65G37 B2371, B2378, B6571, B3271, 23G37, 55G37 F85 9G87, 8G87 F86 10G04, 9G04, 8G04, 11G04 7G04, 6G04, 65G04 B2341, B2348, B6541, B3241, 23G04, 55G04 F87 10G17, 9G17, 8G17, 11G17 F88 10G16, 9G16, 8G16, 11G16 F89 10G13, 9G13, 8G13, 11G13 F90 10G54, 9G54, 8G54, 11G54 F91 10G26, 9G26, 8G26 F92 10G44, 9G44, 8G44, 11G44 F93 10G50, 8G50, 11G50 6G50, 55G50 F109 10G05, 9G05 7G05, 65G05 F110 10G38, 9G38, 11G38


53

SARGENT MANUFACTURING COMPANY (Continued) CERTIFIED LOCKS & LATCHES A156.2 2003

CERTIFIED FINISHES Finish Type Licensee’s Symbols Brass with a Clear Organic Coating US 3, US 4 Bronze with a Clear Organic Coating US 9, US 10, US 10BL Chrome over Brass, Bronze, Zinc US 26, US 26D Stainless Steel 300 Series US 32, US 32D Oxidized Satin Bronze, Oil Rubbed US 10B Statutory Dark Bronze, Lacquered US 20D


54

SCHLAGE IR Security Technologies

3899 Hancock Expressway Colorado Springs, CO 80911

(719) 390-5071


Series 4000 - BORED ANSI Function Licensee’s Catalog Designations Numbers Grade 1 Grade 2 Grade 3 F75 D10S, ND10S A10S, AL10S, F10N,

FA10, S10D J10**

F76 CL5190, CL5197, CL5290, CM5190, CM5197, CM5290, D40S, ND40S

A40S, AL40S, F40N, FA40, S40D

J40**

F77 CL5195, CL5295, CM5195, CM5295, D30D, ND30D

A30D, F30N, FA30

F79 A43D F80 D72PD, ND72PD F81 CL5190, CL5290,

CM5190, CM5290, Cobra MPC

F51, FA51, FE595, S51PD

F82 CL5290, CM5190, CM5290, D50PD, D91PD, ND50PD, ND91PD

AL50PD, F54, FA54 J54**

F83 CL5190, CL5290, CM5190, CM5290

F84 CL5196, CL5296, CM5196, CM5296, Cobra MPC, D70PD, ND70PD, ND94PD

A70PD, AL70PD, S70PD

F86 CL5196, CL5296, CM5196, CM5296, Cobra MPC, D80PD, ND80PD, ND96PD

A80PD, AL80PD, F80N, FA80, FE575, S80PD

F87 D82PD, ND82PD F88 D60PD, ND60PD F89 ND12PD, ND25PD F90 D73PD, ND73PD A73PD


55

SCHLAGE IR Security Technologies (Continued) ANSI Function


Numbers Grade 1 Grade 2 Grade 3 F91 D66PD, ND66PD F92 A55PD F93 D85PD,ND85PD A85PD, AL85PD F109 D53PD, D92PD, ND53PD,

ND92PD A53PD, AL53PD

F110 CL5198, CM5198 **Dexter by Schlage products

CERTIFIED FINISHES Finish Type

Licensee’s Symbols

Bright Brass, Inorganic Coated, Physical Vapor Deposition (PVD) 605E 505 Brass with a Clear Organic Coating 605, 606,

609, 610 Bronze with a Clear Organic Coating 611,612,

616 Dark Oxidized Satin Bronze, Oil Rubbed 613 Satin Nickel Plated, Clear Coated 619 Brass with Satin Nickel Plated, Blackened, Satin Relieved, Clear Coated 620 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 629, 630


56

WEISER LOCK 6700 Weiser Lock Dr. Tucson, Arizona 85746

(520) 741-6200

Certified Locks and Latches (A156.2)

Bored and Preassembled Licensee’s Catalog Designation

ANSI Function Number Grade 1 Grade 2 Grade 3 F75 A100, HC100, PA100 AC100, AC150, B100, LC100 F76 A300, A330, HC330 AC300, AC330, B330, LC330 F77 A230 F81 HC530 AC520 F82 A500, A530, HC510, LA535 AC500, AC530, B530, LC535 F83 HC510 F84 HC560 F86 A580, HC580 F89 A160

CERTIFIED FINISHES Finish Type BHMA Code Licensee’s Symbol

Bright Brass, metallic coating 723 Brilliance

Bright Brass, with clear organic coating 605 US3

Antique Brass 609 US5

Bright Bronze, with clear organic coating 611 US9

Antique Bronze, colored organic coating 613 US10P

Venetian Bronze, clear organic coated 616 US11P

Satin nickel plated, clear organic coated 619 US15

Antique nickel plated, clear organic coated 621 US17A

Bright Chrome 625 US26

Satin Chrome 626 US26D

Satin stainless steel 630 US32D

Combined finishes See catalog


57

YALE COMMERCIAL LOCKS & HARDWARE 1902 AIRPORT ROAD MONROE, NC 28110

(704) 283-2101

CERTIFIED LOCKS & LATCHES ANSI A156.2 – 2003

GRADE 1 GRADE 2

ANSI Function Number F75 5401, 540lLN, YMCL101 5301, 5301LN, 4301, 4301LN, YMCK201,YMCL201 F76 5402, 5402LN, 5425LN 5302, 5302LN, 5325LN, 4302, 4302LN, YMCK202,

YMCL202 F76B YMCL102 YMCK202, YMCL202 F77 5403LN 5303LN F79 5331 F80 5421, 5421LN 5321LN F81 4307, 4307LN F82 5404LN F84 5408, 5408LN, YMCL108 5308, 5308LN, 4308, 4308LN, YMCK208,YMCL208 F86 5405, 5405LN, YMCL105 5305, 5305LN, 4305, 4305LN, YMCK205,YMCL205 F87 5430, 5430LN 5330LN F88 5417, 5417LN F89 5409LN 5309LN F90 5422, 5422LN 5322, 5322LN F91 5419 F92 5406, 5406LN 5306, 5306LN F109 5407, 5407LN, YMCL104, 5307, 5307LN, YMCK207, YMCL207 YMCL107 F110 5418LN F111 YMCL128 YMCL228

CERTIFIED FINISHES

Finish Type (ANSI/BHMA) Licensee’s Symbol(s) Bright brass, clear coated 605 Satin brass, clear coated 606 Bright bronze, clear coated 611 Satin bronze, clear coated 612 Dark oxidized satin bronze, oil rubbed 613 Bright chrome plated 625 Satin chrome plated 626 Bright stainless steel 629 Satin stainless steel 630


58

Yale Residential Security Products, Inc. 2725 B Northwoods Parkway

Norcross, GA 30071 (800) 542-7562


BORED & PREASSEMBLED LOCKS & LATCHES

A156.2 1996


Licensee Catalog Designations

Grade 2 Grade 3 Function Number Yale Heritage Yale New Traditions F75 10/11 100/101 F76 20/21/22/26 200/201/221/226 F81 700/701 F82 70/71 F84 75/76 F86 78/79 780/781 F95 850/851 F97 870/871 F102 622/650

Exit Devices

ANSI/BHMA A156.3

2009 DIRECTORY

Exit Devices


60

GENERAL INFORMATION This information is included in the Directory as an aid to the user. Readers are cautioned not to rely on this information as describing total requirements and are urged to obtain copies of ANSI/BHMA A156.3 and other Standards referenced therein for complete information. TYPES

Type 1: Rim Exit Device

Type 2: Surface Vertical Rod Exit Device

Type 3: Mortise Exit Device

Type 4: Narrow Stile Rim Exit Device

Type 5: Narrow Stile Surface Vertical Rod Exit Device

Type 6: Narrow Stile Concealed Vertical Rod Exit Device

Type 7: Wood Door Concealed Vertical Rod Exit Device

Type 8: Metal Door Concealed Vertical Rod Exit Device

Type 9: Multi-point Combination Rim and Surface Vertical Rod Exit Device

Type 10: Narrow Stile Mortise Exit Device

Type 11: Multi-point Combination Mortise and Surface Vertical Rod Exit Device

Type 12 Multi-point Combination Mortise and Concealed Vertical Rod Exit Devices

Type 21A: Door Coordinator with Override Feature

Type 21B: Door Coordinator without Override Feature

Type 22: Removable Mullion

Type 23: Concealed Automatic Latching Two Point Bolts

Type 24: Surface Automatic Latching Two Point Bolts

Type 25: Automatic Extension Flush Bolt Set

Type 26: Rim Paddle Device

Type 28: Rim Exit Device incorporating a Dead Bolt

Types 1 through 12 may include a deadbolt in addition to, or in place of a latch by specifying suffix “D”. Types 2, 5, 6, 7, 8, 9, 11, 12 may include designs which are furnished without the bottom rod, commonly refererred to as “less bottom rod”, and specified by the suffix “LBR”.


61

FUNCTIONS In all functions, latchbolts and deadbolts, or deadbolts or latchbolts alone are released by depressing the actuating bar. Labeled Fire Exit Hardware shall comply with applicable building codes. All functions are not available in all types of exit devices. Some functions may be available with electrical or pneumatic operations in addition to mechanical operation. The basic function shall remain the same as described. Consult manufacturer's catalog.

Outside Trim Function Descriptions 01: Exit only, no trim or blank escutcheon.

02: Entrance by trim when actuating bar is locked down.

03: Entrance by trim when latch is released by key. Key removable only when locked.

04: Entrance by trim when latch is released by key or set in a retracted position by key.

05: Entrance by thumb piece. Key locks or unlocks thumb piece.

06: Entrance by thumb piece only when released by key. Key removable only when locked.

07: Entrance by thumb piece. Inside or outside key locks or unlocks thumb piece. Outside key releases latch.

08: Entrance by knob or lever. Key locks or unlocks knob or lever.

09: Entrance by knob or lever only when released by key. Key removable only when locked.

10: Entrance by knob or lever. Inside or outside key locks or unlocks knob or lever. Outside key releases latch.

11: Entrance by control turnpiece. Key locks or unlocks control.

12: Entrance by control turnpiece only when released by turning key. Key removable only when locked.

13: Entrance by key or combination lock.

14: Entrance by trim when latch is released by knob, lever,. Always active, no cylinder.

15: Entrance by trim when latch is released by thumb piece. Thumb piece always active, no cylinder.

16: Entrance by trim when latch is released by control turnpiece. Turnpiece always active, no cylinder.

17: Entrance by control turnpiece. Inside or outside key locks or unlocks turnpiece. Outside key releases latch.


62

ADAMS RITE MANUFACTURING CO. 260 Santa Fe Street Pomona, CA 91767

(800) 872-3267

MODELS LISTED BY THE U.L. BUILDING MATERIALS DIRECTORY OR MECHANICAL EQUIPMENT DIRECTORY AS CONFORMING TO ANSI/BHMA A156.3-2008 FOR EXIT DEVICES, GRADE 1:

Rim Device: Type 1 Models 3700 and 8700 Type 4 Model 8800, G88

Surface Vertical Rod: Type 2 Models 3100, 3100T, 3100W, 8100,

and 8100T Type 5 Model 8200, 8200T

Concealed Vertical Rod: Type 8 Models 3600, 3600T, 3675, 3676

8500, 8500T, and 8576 Type 6 Models 8600, G86, and 8675, F86

Mortise Devices: Type 3 Models 3300, 3375, 3376, 8300

8375, and 8376 Type 10 Models 8400 and 8475

Mullions Type 22 3889

ANSI Function Numbers Licensee’s Catalog Designation 01 All 3000/8000 Series Devices

02 All 8000 Series Devices X 3080 Series Trim or 3001/3002

03 All 3000/8000 Series (N/A: 3675/3676/8576) X 3080(NL) Series Trim or 3001/3002

04 All 8000 Series with “C” suffix (Cyl. Dogging) X 3080 Series Trim or 3001/3002

08 All 3000/8000 X 3080 Series Trim

09 All 3000/8000 X 3080 Series Trim

11 All 8000 Series Devices (N/A: 8576) X 8066

12 All 8000 Series Devices (N/A: 8576) X 8066(NL)

Note: [NL] denotes nightlatch feature.


63

ADAMS RITE MANUFACTURING CO. (Continued) Notes:

1. Series 3000 denotes Licensee’s fire exit hardware.

2. All exit devices are available with electric latch retraction (“EL” or “LR” suffix example: 3100 LR).

3. All exit devices are available with electric dogging (“ED” suffix example: 3100 ED).

4. All 3000 and 8000 series devices are available with touchbar monitoring (“M” suffix example: 3300M).

5. All 3000 and 8000 series devices are available with onboard alarm systems (“A” suffix example: 8701A)

6. Consult Licensee’s catalog for further information.

CERTIFIED FINISHES

Finish Type Licensee’s Symbol(s)

Bright Brass - Clear Coated US3 (605)

Satin Brass - Clear Coated US4 (606)

Bright Bronze - Clear Coated US9 (611)

Satin Bronze - Clear Coated US10 (612)

Dark Bronze 10B

Bright Stainless Steel US32 (629)

Satin Stainless Steel US32D (630)

Aluminum - Clear Anodized 628

Aluminum – Dark Bronze Anodized 313

Aluminum - Black Anodized 335


64


(800) 872-3267 Corresponding U.L. Listings to the Models listed by the U.L. Building Materials Directory or Mechanical Equipment Directory as conforming to ANSI/BHMA A156.3-2008 for Exit Devices, Grade 1: GXHX November 17, 1999 R11490 (N) Fire Exit Hardware: 3100, 3100T, 3100W, 3300, 3375, 3600, 3600T, 3675, 3676, 3700 FVSR June 26, 2003 SA5757 (S) (A Card) Panic Hardware: 3100, 3100T, 3300, 3600, 3600T, 3675, 3676, 3700, 8100, 8100T, 8200, 8200T, 8300, 8375, 8400, 8475, 8500, 8576, 8600, F86, G86, G88, 8675, 8700, 8800


65

ARROW LOCK MANUFACTURING COMPANY 325 DUFFY AVENUE

HICKSVILLE, NY, 11801 516-704-2700

CERTIFIED EXIT DEVICES

MODELS LISTED BY THE U.L. BUILDING MATERIALS DIRECTORY OR MECHANICAL EQUIPMENT DIRECTORY AS CONFORMING TO ANSI/BHMA A156.3 2001 FOR EXIT DEVICES, GRADE 1: Rim Device: Models S1250, S1800, S3800, S4800, FS1250, FS1800 & FS3800, 500 Surface Vertical Rod Device: Models S1100, S1700, S3700, FS1100, FS1700 and FS3700, 600 Concealed Vertical Rod Device: Models S3600, S4600, FS3600, FS4600 Mortise Device: Models S1900, S3900, S4900, FS1900, FS3900 and FS4900 ANSI Function Licensee’s Catalog Designation Numbers 01 Rim: S1250, FS1250, S1801, FS1801, S3801, FS3801, S4801,

FS4801; 500, 500-FR Surface Vertical Rod: S1150, FS1150, S1701, FS1701, S3701 FS3701; 600, 600-FR Concealed Vertical Rod: S3601, FS3601, S4601, FS4601 Mortise: S1901, FS1901, S3901, FS3901, S4901, FS4901 Note: No outside trim applicable on all above.

02 Rim: S1250 x SF02; S1801, S3801, S4801 x SP02, SB02, SN02, SS02, SK02, SL02; 500 x SF02 Surface Vertical Rod: S1150 x SF02; S1701, S3701 x SP02, SB02, SN02, SS02, SK02, SL02; 600 x SF02 Concealed Vertical Rod: S3601, S4601 x SP02, SB02, SN02, SS02, SK02, SL02 Mortise: S1901, S3901, S4901 x SP02, SB02, SN02, SS02, SK02, SL02

03 Rim: S1250, FS1250 x SF12, BD12, TA12, SR12, BR12; S1803, FS1803, S3803, FS3803 x SP03, SB03, SN03, SS03, SK03, SL03, SW-S, SW-L; S4803, FS4803 x SW-S, SW-L; 500, 500-FR x SF12, 512ET Mortise: S1903, FS1903, S3903, FS3903 x SP03, SB03, SN03, SS03, SK03, SL03, SW-S, SW-L; S4903, FS4903 x SW-S, SW-L

04 Rim: S3803, S4803 x CD Surface Vertical Rod: S3701 x CD Concealed Vertical Rod: S3601, S4601 x CD Mortise: S3903, S4903 x CD


66

ARROW LOCK MANUFACTURING COMPANY (Continued)

ANSI Function Licensee’s Catalog Designation Numbers 05 Rim: S1805, FS1805, S3805, FS3805 x SP05, SB05, SN05, SS05

Surface Vertical Rod: S1705, FS1705, S3705, FS3705 x SP05, SB05, SN05, SS05 Mortise: S1905, FS1905, S3905, FS3905 x SP05, SB05, SN05, SS05

08 Rim: S1250, FS1250 x BD17, TA17, SR17, BR17; S1808, FS1808, S3808, FS3808 x SL08, SK08; 500, 500-FR x 517ET Surface Vertical Rod: S1150, FS1150 x BD17, TA17, SR17,BR17; S1708, FS1708, S3708, FS3708 x SL08, SK08; 600, 600-FR x 517ET Concealed Vertical Rod: S3608, FS3608 x SL08 Mortise: S1908, FS1908, S3908, FS3908, S4908, FS4908 x SL08, SK08

11 Surface Vertical Rod: S1150, FS1150 x S311, S1701; FS1701 x S311; S3701, FS3701 x S311 Concealed Vertical Rod: S3601, FS3601, FS4601 x S411; S4601 x S511

12 Surface Vertical Rod: S1150, FS1150 x S312, S1701, FS1701, S3701, FS3701 xS312, S3601, FS3601, FS4601 x S412, S4601 x S512

ASSOCIATED PRODUCTS

BHMA Types Licensee’s Catalog Description Type 22; Removable

Mullion S20, S20-N, S21, S20-KR, S21-KR Type 24; Surface Automatic

Latching Two Point Bolt 3700, 3700-FR, 3700-LBR, 3700-FR-LBR

CERTIFIED FINISHES

Finish Type Licensee’s Symbol (s) Brass w/ clear organic coating US3, US4 Bronze w/ clear organic coating US10 Brass or Bronze, Chrome Plated US26, US26D Stainless Steel US32, US32D


67

C.R. Laurence Co., Inc. 2503 East Vernon Avenue

Los Angeles, California 90058 www.crlaurence.com Phone (800) 421-6144

Fax (800) 262-3299 Models listed by the U.L. Building Materials Directory or Mechanical Equipment Directory as conforming to ANSI/BHMA A156.3-2001 for Exit Devices Grade 1: Surface Vertical Rod: Type 2 Models PA100, PA110, PA500, PA510 ANSI Function Numbers Licensee’s Catalog Designation 01 Surface Vertical Rod Models: PA100, PA110, PA500 and PA510 02 Surface Vertical Rod Models: PA100, PA110, PA500 and PA510 03 Surface Vertical Rod Models: PA100, PA110, PA500 and PA510

Certified Finishes Finish Type (ANSI/BHMA Designations) Licensee’s Symbols Bright Stainless Steel US32 (629) PS Satin Stainless Steel US32D (630) BS Notes Devices are available equipped with the following options: 1. Interchangeable Exterior Fixed Pull Handle Styles: A, B, C, D, E, F, G, H, J, J-S, K, K-S, L,

L-S, M, M-S, N, P, X, Y and Z. Visual reference charts are available. 2. “R” Suffix Denotes Door Rail Mounting. 3. “G” Suffix Denotes Direct to Glass Mounting. 4. “K” Suffix Denotes Optional Keyed Access Device. 5. ESK1 and ESK2 Electric Strike Keeper for Single and Double Doors can be specified in

place of the Standard Fixed Strike. Underwriter’s File SA12722 Issue Date 03/14/03 Models: PA100, PA110, PA500 and PA510


68

C A L - R OYA L P R O D U C T S , I N C .


CAL-ROYAL PRODUCTS, INC. 6605 FLOTILLA STREET COMMERCE, CA 90040 TEL: (323) 888-6601 & (800) 876-9258 FAX: (323) 888-6699 &(800) 222-3316 Email: [email protected]

A156.3 2009 EXIT DEVICES ANSI TYPE DEVICE TYPE LICENSEE’S CATALOG Type 1 RIM 9900EO36, 9920EO48 Type 2 Surface Vertical Rod 9960V3684, 9990V3696, 9950V36120,9980V4896 99404V48120 Type 1 RIM 9800EO24, 9800EO32, 9800E036, 9800E048 Type 2 Surface Vertical Rod 9810V2484, 9870V3284,

9860V3684, 9890V3696 9850V36120, 9840V481 9840V48120, 9880V4896

Type 1 RIM 2200EO24, 2220EO32, 2200E036, 2220E048 Type 2 Surface Vertical Rod 2210V2484, 2270V3284 2260V3684, 2290V3696 2250V36120, 2280V4896 2240V48120 Type 1 RIM 5000E036, 5500E048 Type 2 Surface Vertical Rod 5000V3684 ANSI FUNCTION TRIM TYPE LICENSEE’S CATALOG NUMBERS 08 CLUTCH ENTRANCE ENTOOL (ROSE) 04 CLUTCH STOREROOM STR05L (ROSE) 15 PASSAGE PAS30L (ROSE) 10 DUMMY DUM40L (ROSE) 63 RIGID ENTRANCE ESC9900 (ESCUTCHEON) 04 RIGID STOREROOM ESC9905 (ESCUTCHEON) 62 PASSAGE ESC9930 (ESCUTCHEON) 10 DUMMY ESC9940 (ESCUTCHEON)



69

63 ENTRANCE 99TP00 (THUMB PIECE) 04 STOREROOM 99TP05 (THUMB PIECE) 62 PASSAGE 99TP30 (THUMB PIECE) 10 DUMMY 99TP40 (THUMB PIECE) 03 ENTRANCE 9900NL (PULL) 02 DUMMY 9900DTP (PULL) 10 COVER PLATE 9900EOP (BLANK PLATE) 08 CLUTCH ENTRANCE ENTOOL (ROSE) 04 CLUTCH STOREROOM STR05L (ROSE) 15 PASSAGE PAS30L (ROSE) 10 DUMMY DUM40L (ROSE) 63 RIGID ENTRANCE ESC9800 (ESCUTCHEON) 04 RIGID STOREROOM ESC9805 (ESCUTCHEON) 62 PASSAGE ESC9830 (ESCUTCHEON) 10 DUMMY ESC9840 (ESCUTCHEON) 63 ENTRANCE 98TP00 (THUMB PIECE) 04 STOREROOM 98TP05 (THUMB PIECE) 62 PASSAGE 98TP30 (THUMB PIECE) 10 DUMMY 98TP40 (THUMB PIECE) 03 ENTRANCE 9800NL (PULL) 02 DUMMY 9800DTP (PULL) 10 COVER PLATE 9800EOP (BLANK PLATE) 08 CLUTCH ENTRANCE ENTOOL (ROSE) 04 CLUTCH STOREROOM STR05L (ROSE) 15 PASSAGE PAS30L (ROSE) 10 DUMMY DUM40L (ROSE) 63 RIGID ENTRANCE ESC2200 (ESCUTCHEON) 04 RIGID STOREROOM ESC2205 (ESCUTCHEON) 62 PASSAGE ESC2230 (ESCUTCHEON) 10 DUMMY ESC2240 (ESCUTCHEON) 63 ENTRANCE THP00 (THUMB PIECE) 04 STOREROOM THP05 (THUMB PIECE) 62 PASSAGE THP30 (THUMB PIECE) 10 DUMMY THP40 (THUMB PIECE) 03 ENTRANCE 2200NL (PULL) 02 DUMMY 2200DTP (PULL) 10 COVER PLATE 2200EOP (BLANK PLATE) 08 PULL & RIM CYLINDER 2200PULNL 04 LEVER KEY LOCK 8000/L 08 CLUTCH KEYWAY CLU5000L 10 STOREROOM 8000/S 62 PASSAGE 8000/PAS 10 DUMMY 8000/DUM 08 BALL KNOB KEY LOCK 8000/K


70

ACCESSORIES: TYPE 22 REMOVABLE MULLION 418 NOTES:

1. Suffix “F” denotes Fire Rated Hardware (Exit Devices) 2. Suffix “IC” denotes Interchangeable core (Trims) 3. Suffix “N” in front of ESC for Heavy Duty, Wider Escutcheon Lever Trim for 9800

Series 4. Suffix “WC” for Wood Concealed vertical rod or “MC” for Metal Concealed

vertical rod for 9800 Series

CERTIFIED FINISHES FINISH TYPE BHMA CODE/ CATEGORY LICENSEE’S CATALOG Bright Brass 707, 677 (605E) US3 Satin Brass 688, 678 (606E) US4 Satin Bronze 709, 680 (612E) US10 Antique Bronze Oiled 710, 704 (613E) US10B Bright Chrome 712, 681 (625E) US26 Satin Chrome 713, 682 (626E) US26D Satin Stainless Steel 713, 630 (626E) US32D


71

CORBIN RUSSWIN , INC. 255 EPISCOPAL ROAD

BERLIN, CT 06037 (860) 225-7411

CERTIFIED EXIT DEVICES & TRIM

ANSI/BHMA A156.3 – 2001

Models listed in the U.L. Mechanical Equipment Directory or Fire Resistance Directory as conforming to ANSI/BHMA A156.3 for exit devices and trim, Grade 1:

A156.3 - 2001 Rim Exit Devices: Series ED4200, ED4200S, ED5200, ED5200A, ED5200S, ED5200SA, ED5202, ED5202A, ED5202S, ED5202SA, ED6200, ED6200A, ED7200, ED8200, ED8200A, ED8200B, SL8200, SL8200A Surface Vertical Rod Devices: Series ED4400, ED5400, ED5400A, ED5470, ED5470B, Ed6400, ED6400A, ED7400, ED8400, ED8400A, SL8400, SL8400A Concealed Vertical Rod Exit Devices: Series ED4800, ED5800, ED5800A, ED5860, ED5860B, ED6800, ED6800A, ED7800, ED7800A Mortise Exit Devices: Series ED5600, ED5600A, ED5602L, ED5602AL, ED6600, ED6600A, ED66900, ED7600, ED7600A

TRIM

ANSI Function Number 01 Exit only 02 Series 50 and M50 with various prefix letters and numbers, except Series 850 03 Series 57 and M57 with various prefix letters and numbers 04 Series 57 and M57 with various prefix letters and numbers 05 Series 55 and M55 with prefix letter “T” and various prefix numbers, except T7M55,

T8M55, T9M55, T10M55, T11M55, T12M55 06 Series 57 with prefix letters “T” and various prefix numbers 08 Series 55 and M55 with various prefix letters and numbers, except Series 855 09 Series 57 and 59 with various prefix letters and numbers, except 859 11 Series 55 with prefix letter “O” and various prefix numbers, except O855 & O1455 12 Series 57 and 59 with prefix letter “O” and various prefix numbers, except 0859 &

01459


72

CORBIN RUSSWIN, INC. – A156.3 (continued)

ASSOCIATED PRODUCTS BHMA Type Licensee’s Catalog Designation 22 Removable mullion 507(A), 508(A), 510, 707(A), 708(A), 710, 808, FE700(A), WS700(A) KM, 900(A), 900(B) KM, 900E KM Series Notes: 1. Suffix “A” and “B” in Licensee’s catalog numbers indicate fire exit hardware. 2. Series ED4000 and ED5000 Exit Devices are available with Electrified Exit Options:

M61 Exit Alarm M88 NFPA 30 Second Delay M89 BOCA 15 Second Delay M90 BOCA 30 Second Delay M91 Bolt Monitor M92 Touchbar Monitor M93 Trim Monitor M94 Electric Latch Pullback M97 Electric Dogging M98 SPDT Lock/Unlock Security Monitor Switch SAF/SEC Safe/Secure Mortise Exit Device Trim Control

3. Series ED8200 and ED8200B Rim Exit Devices are available with Exit Alarm (M61) and Exit Alarm with delay (M62) options.

4. Prefix letters and numbers for trim vary depending upon design of knob, lever, thumbpiece “T” or operator “O”.

5. Refer to Licensee’s catalog for specific model designations 6. Add suffix “D” to model number for Delayed Egress Functions

CERTIFIED FINISHES

Finish Type (ANSI/BHMA): Licensee’s Symbol(s) Bright brass, clear coated 605 Satin brass, clear coated 606 Bright bronze, clear coated 611 Satin bronze, clear coated 612 Dark oxidized satin bronze, oil rubbed 613 Bright chrome plated 625 Satin chrome plated 626 Bright stainless steel 629 Satin stainless steel 630


73

Detex Corporation 302 Detex Drive

New Braunfels, TX 78130 PH: 800-729-3839 Fax 830-620-6711

Website: www.detex.com

CERTIFIED EXIT DEVICES AND TRIM

Models listed in the U. L. Building Materials Directory of Mechanical Equipment Directory as conforming to ANSI/BHMA A156.3, 2001 for exit device and trim, Grade 1 unless otherwise noted. ANSI Device Type Exit Device Series Type 1 Rim 10, F10, V4000, FV4000, V40, FV40 Type 2 Surface Vertical Rod 20, F20, 21, F21, V50, FV50, V51, FV51 Type 3 Mortise 30, F30 Type 4 Narrow Rim 40, F40, V40, FV40 Type 5 Narrow Surface Vertical Rod 50, F50, 51, F51, V50, FV50, V51, FV51 Type 1 (Grade 2) Rim ECL-230D-PH, ECL-600-PH Outside Trim Functions: ANSI 01: 01W, 01WM, 01C, O1CN, 01CM, 01A, 01AN

ANSI 02: 02C, 02CN, 02CM, 02D, 02DM, 02DN, 02A, 02AN

ANSI 03: 03P, 03PN, 03W, 03WM, 03WS, 03C, 03CM, 03CHN, 03A, 03AN

ANSI 08: 08D, 08DM, 08DN, 08BN

ANSI 09: 09D, 09DM, 09DN, 09BN

ANSI 10: 10D, 10DM

ANSI 14: 14D, 14DM, 14DN, 14BN

http://www.detex.com/�


74

Associated Products: Type 22 Removable Mullion 90KR, F90KR

Available options:

ADVANTEX: EA = Exit Alarm EE = Delayed Egress EI = Electronic Integration EM = Delayed Egress with Magnetic Lock ES = Signal Switch ER = Electric Latch Retraction EXV = Request to Exit w/high voltage EX = Request to Exit ED = Electric Dogging CD = Cylinder Dogging LD = Less Dogging HD = Hex Dogging W = Weatherized EXW = Weatherized Request to Exit H = Hurricane Rated (see NOA listings for available models/pressures) VALUE SERIES: EB = Battery Alarm EE = Delayed Egress EH = AC Alarm EM = Delayed Egress with Magnetic Lock EI = Electronic Integration ER = Electric Latch Retraction ES = Signal Switch ED = Electric Dogging EX = Request to Exit HD = Hex Dogging CD = Cylinder Dogging LD = Less Dogging W = Weatherized H = Hurricane Rated (see NOA listings for

available models/pressures) Certified Finishes Finish Type (ANSI/BHMA) Licensee’s Symbol(s)

Bright Brass plate, PVD 605 Satin Brass Plate, PVD 606 Bright Bronze plate, PVD 611 Satin Bronze Plate, PVD 612 Oxidized Satin Bronze, PVD 613 Bright Stainless Steel 629 Brushed Stainless Steel 630


75

DOOR CONTROLS INTERNATIONAL 2362 BISHOP CIRCLE EAST

DEXTER, MI 48130 800-742-3634

MODELS LISTED IN THE U.L. FIRE RESISTANCE DIRECTORY OR BUILDING MATERIALS DIRECTORY AS CONFORMING TO ANSI/BHMA A156.3–2008 FOR EXIT DEVICES:

CERTIFIED EXIT DEVICES, GRADE 1 ANSI Type Numbers Licensee’s Catalog Designation Type 1 Series 1200, 1300 Suffix F denotes certified Type 4 Series 1200, 1300 Fire Exit Hardware. ANSI Function Numbers 01 Series 1200, 1300 Suffixes A, C, or D denote 02 Series 1200, 1300 dogging status. Model nos. 03 Series 1200, 1300 ending in 10, 20, or 30 instead 08 Series 1200, 1300 of 00 denote alarms. By SS1 or SS2 denotes signal switch(es). See Licensee’s catalog for complete descriptions.

CERTIFIED TRIMS, GRADE 1 08 08-L, 08E-L, 08N-L, 08NE-L NOTE: For 08 Function without cylinder (lever always active) specify Function 14-L or 14N-L. MODELS LISTED IN THE U.L. FIRE RESISTANCE DIRECTORY AS CONFORMING TO ANSI/BHMA A156.3-2008 FOR EXIT DEVICES. ALL PRODUCTS FIRE RATED. CERTIFIED DOOR COORDINATORS AND CARRY-OPEN BARS, GRADE 1 ANSI Type Numbers Licensee’s Catalog Designation Type 21 Door Coordinator and Carry-open Bar Series 600 and CB-1 Type 21A Door Coordinator with override feature Series 600 Carry-open Bar CB-1 CERTIFIED AUTOMATIC EXTENSION FLUSH BOLTS, GRADE 1 Type 25 Automatic Extension Flush Bolt Set Series 840, Series 940 Series 860, Series 960


76


DEXTER, MI 48130 800-742-3634

ASSOCIATED PRODUCTS FOR LABELED FIRE DOORS ANSI Type Numbers Licensee’s Catalog Designation Type 21 Door Coordinator and Carry-open Bar Series 500 and CB, CB-1 Type 21B Door Coordinator without override feature Series 500 Type 27 Self-Latching Extension Flush Bolt Set Series 805, Series 905 ELECTROMAGNETIC LOCKS CERTIFIED TO A156.23-2004, GRADE 1 ANSI/BHMA Type Licensee’s Catalog designations Number 1000 lbf Ranking E08501 1401, 1402, 1403, 1404 E08531 1405, 1406 All are UL Listed Releasing Devices and UL Listed Auxiliary Locks for Fire Doors. All are dual voltage 12VDC or 24 VDC. CERTIFIED FINISHES Finish Type Licensee’s Symbol Clear Anodized Aluminum 28 Duranodic 313


77

DORMA Architectural Hardware 1003 West Broadway, Steeleville, IL 62288

717-336-3881 www.dorma-usa.com

CERTIFIED EXIT DEVICES A156.3 - 2001

Models listed in the U.L. Building Materials Directory or Mechanical Equipment Directory as conforming to ANSI/BHMA A156.3 2001 for Grade 1 Exit Devices and Trim.

Rim Device: Model’s 4300, F4300, 5300, F5300, 8300, F8300, 9300, and F9300 Surface Vertical Rod Device: Model’s 4400, F4400, 5400, F5400, 8400, F8400, 9400,

and F9400 Mortise Device: Model 5500, F5500, 9500, and F9500 Concealed Vertical Rod Device: Model’s 4100, F4100, 5100, F5100, 9100, and F9100

ANSI Function Number Licensee’s Catalog Designations

01 Rim: 4300, F4300, 5300, F5300, 8300, F8300, 9300, and F9300 Surface Vertical Rod: 4400, F4400, 5400, F5400, 8400, F8400, 9400, and F9400 Mortise: 5500, F5500, 9500, and F9500 Concealed Vertical Rod: 4100, F4100, 5100, F5100, 9100, and F9100

02 Rim: 5300, 8300, and 9300 Surface Vertical Rod: 5400, 8400, and 9400 Mortise: 5500 and 9500 Concealed Vertical Rod: 4100, 5100 and 9100

03 Rim: 4300, F4300, 5300, F5300, 8300, F8300, 9300, and F9300 Surface Vertical Rod: 4400, F4400, 5400, F5400, 8400, F8400, 9400, and F9400 Mortise: 5500, F5500, 9500, and F9500 Concealed Vertical Rod: 4100, F4100, 5100, F5100, 9100, and F9100

04 Rim: 4300, 5300, 8300, and 9300 Surface Vertical Rod: 4400, 5400, 8400, and 9400 Mortise: 5500 and 9500 Concealed Vertical Rod: 4100, 5100 and 9100

05 Rim: 9300 and F9300 Surface Vertical Rod: 9400 and F9400 Mortise: 9500 and F9500 Concealed Vertical Rod: 9100 and F9100

06 Rim: 9300 and F9300 Surface Vertical Rod: 9400 and F9400 Concealed Vertical Rod: 9100 and F9100


78

DORMA Architectural Hardware (continued) ANSI Function Number Licensee’s Catalog Designations 08 Rim: 4300, F4300, 5300, F5300, 8300, F8300, 9300, and F9300 Surface Vertical Rod: 4400, F4400, 5400, F5400, 8400, F8400, 9400, and F9400 Mortise: 5500, F5500, 9500, and F9500 Concealed Vertical Rod: 4100, F4100, 5100, F5100, 9100 and F9100

09 Rim: 4300, F4300, 5300, F5300, 9300, and F9300 Surface Vertical Rod: 4400, F4400, 5400, F5400, 9400, and F9400 Concealed Vertical Rod: 4100, F4100, 5100, F5100, 9100, and F9100

11 Rim: 4300, F4300, 5300 and F5300 Surface Vertical Rod: 4400, F4400, 5400 and F5400 Mortise: 5500 and F5500 Concealed Vertical Rod: 4100, F4100, 5100 and F5100

12 Rim: 4300, F4300, 5300 and F5300 Surface Vertical Rod: 4400, F4400, 5400 and F5400 Concealed Vertical Rod: 4100, F4100, 5100 and F5100 ANSI Grade Trim Designations

1 JO03, JODT, JK08, JK08M, JK08R, JK08MR, JK08C, JK08MC, JK09, JK09C, JK23, JK23M, JK23R, JC08, JC08M, JC08R, JC08MR, JC08C, JC08MC, JC09, JC09C, JC23, JC23M, JC23R, JR08, JR08M, JR08R, JR08MR, JR08C, JR08MC, JR09, JR09C, JR23, JR23M, JR23R, JP02, JP03, JP03V, JP11, JP11M, JP12, JP25, JP25M, JT08, JT08M, JT08R, JT08MR, JT08C, JT08MC, JT09, JT09C, JT23, JT23M, JT23R, OP02, 8ODT, 8P02, 8O03, 8PDT, 8P03, 8ODTP, 8O03P, PTS02, PTS03, HTS05, HTS06, HTS22, PRS02, PRS03, HRS05, HRS06, HRS22, NPS03, NPSDT, VODT, VO03, VO03M, V102, V103, V103M, V302, V303, V303M, NPTDT, NPT03, NPT03M, POF03HDA, PTT02, PTT03, PTT03M, HTT05, HTT05M, HTT06, HTT22, HTT22M, PRT02, PRT03, PRT03M, HRT05, HRT05M, HRT06, HRT22, HRT22M, NPT03CV, NPTDTCV, PTT02CV, PRT02CV, PTT03CV, PRT03CV, HTT22CV, HRT22CV, HTT05CV, HRT05CV, HTT06CV, HRT06CV, YODT, YO03, YO03M, YK02R, YK03, YK03M, YK03R, YK03MR, YK08, YK08M, YK08C, YK08MC, YK09, YK09C, YK23, YK23M, YC02R, YC03, YC03M, YC03R, YC03MR, YC08, YC08M, YC08C, YC08MC, YC09, YC09C, YC23, YC23M, YT02R, YT03, YT03M, YT03R, YT03MR, YT08, YT08M, YT08C, YT08MC, YT09, YT09C, YT23, YT23M, YR02R, YR03, YR03M, YR03R, YR03MR, YR08, YR08M, YR08C, YR08MC, YR09, YR09C, YR23, YR23M, YG02R, YG03, YG03M, YG03R, YG03MR, YG08, YG08M, YT08C, YG08MC, YG09, YG09C, YG23, YG23M, K03, K08, K03IC, K08IC, K23, C03, C08, C03IC, C08IC, C23, R03, R08, R03IC, R08IC, R23, G03, G03IC, G08, G08IC, G23, V003CV, VODTCV, V102CV, V302CV, V103CV, V303CV.

JF03AR, JF03EP, JF03SO, JK03R, JT03R, JO03V Note: Consult manufacturer’s catalog for specific applications.


79

DORMA Architectural Hardware (continued)

ASSOCIATED PRODUCTS BHMA Types Licensee’s Catalog Designations

Type 22: Removable Mullion 1300, F1300, HC1300, 1310, 1330,

1340KR and F1340KR

NOTES:

Devices are available equipped with the following options: 1. “F” Prefix Denotes Fire Exit Hardware (ex. F9300) 2. “ES” Prefix Denotes Electric Latch Retraction (ex. ES9300) 3. “MD” Prefix Denotes Magnetic Dogging (ex. MD9300) 4. “MS” Prefix Denotes Touch bar monitoring (ex. MS9400) 5. “LM” Prefix Denotes Latch Monitoring (ex. LM9300) 6. “CD” Prefix Denotes Cylinder Dogging (ex. CD9500) 7. “PB” Prefix Denotes Pullman Bottom Latch with Vertical Rod Device (ex. PB9400) 8. “LB” Suffix Denotes Less Bottom Rod on Vertical Rod Device (ex. 9400LB) 9. “ETR” Suffix Denotes Doors Over 8 Feet on Vertical Rod Device (ex. 9400ETR) 10. “DE” Prefix Denotes Delayed Egress Option (ex. DE9300) 11. “BPA” Prefix Denotes Battery Powered Alarm (ex. BPA9300) 12. “BPAR” Prefix Denotes Battery Powered Alarm Auto. Reset (ex. BPAR9300) 13. “DWA” Prefix Denotes Direct hard-Wired Alarm (ex. DWA9300) 14. “HC” Prefix Denotes Hurricane Code (Windstorm Approved) (ex. HC9400) 15. “LM/MS-BP” Prefix Denotes Latch Bolt and Touch Bar Monitor with Bypass 16. “LFSC’ Suffix Denotes Electric Unlocking, Fail Secure 17. “LFSF” Suffix Denotes Electric Locking, Fail Safe 18. “AD” Prefix Denotes Metric fasteners. (Limited to 4000 series only, ex AD4300) Note: Consult manufacturer’s catalog for further information.


80

DORMA Architectural Hardware (continued)

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designations) Licensee’s Symbol(s)

Primed for Painting 600 Bright Brass, Clear Coated 605 Satin Brass, Clear Coated 606 Bright Bronze, Clear Coated 611 Satin Bronze, Clear Coated 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Bright Chrome Plated 625 Satin Chrome Plated 626 Satin Stainless Steel 630 Aluminum Painted 689 Light Bronze Painted 691 Black Painted 693 Dark Bronze Painted 695 Satin Brass Painted 696


81

DOR-O-MATIC

INGERSOLL RAND SECURITY TECHNOLOGIES 2720 TOBEY DRIVE

INDIANAPOLIS, IN 46219 317-613-8944

Models listed in the U.L. Mechanical Equipment Directory as conforming to the American National Standard for Exit Devices ANSI/BHMA A156.3 (2001). ANSI FUNCTION LICENSEE’S DEVICE DESIGNATIONS NUMBERS Grade 1 Devices

01 Rim: 1790 Concealed Vertical Rod: 1690, 2390

02 Rim: 1791 Concealed Vertical Rod: 1691

03 & 04 Rim: 1792, 1794 Concealed Vertical Rod: 1692, 1694

ASSOCIATED PRODUCTS

BHMA TYPES LICENEE’S CATALOG NUMBER Type 22 Removable Mullion RM70, RM150, RM170

CERTIFIED FINISHES

FINISH TYPES LICENSEE’S SYMBOL Satin Aluminum, Dark Bronze Anodized DC 13 Satin Aluminum, Clear Anodized US 28 Satin Aluminum, Black Anodized DC 35


82

FALCON DOOR HARDWARE


INDIANAPOLIS, IN 46219 (317) 613-8944


Models listed in the U.L. Mechanical Equipment Directory or Fire Resistance Directory as conforming to the American National Standard for Exit Devices ANSI/BHMA A156.3 (2008). Grade 1 Devices: Rim Device: Series 24-R, 25-R Surface Vertical Rod Device: Series 24-V, 25-V Concealed Vertical Rod Device: Series 24-C, 25-C Mortise Device: Series 25-M ANSI/BHMA EXIT DEVICE TYPES Type 1 Rim: Series 24-R, 25-R Type 2 Surface Vertical Rod: Series 24-V, 25-V Type 3 Mortise: Series . 25-M Type 4 Narrow Stile Rim: Series 24-R Type 5 Narrow Stile Surface Vertical Rod: Series 24-V Type 6 Narrow Stile Concealed Vertical Rod: Series 24-C Type 8 Metal Door Concealed Vertical Rod: Series 24-C, 25-C Type 22 Removable Mullions: 2923, 4023, CR-4023, F4023, CRF- 4023 ANSI FUNCTION LICENSEE’S DEVICE DESIGNATIONS NUMBERS 01 Rim: Series 24-R, 25-R

Surface Vertical Rod: Series 24-V, 25-V Concealed Vertical Rod: Series 24-C, 25-C Mortise: Series 25-M 02 Rim: Series 24-R, 25-R

Surface Vertical Rod: Series 24-V, 25-V Concealed Vertical Rod: Series 24-C, 25-C

Mortise: Series 25-M 03 Rim: Series 24-R, 25-R


Mortise: Series 25-M


83

Falcon Door Hardware (Continued) A156.3 Certified Exit Devices 04 Rim: Series 24-R, 25-R








Mortise: Series 25-M 09 Rim: Series 24-R, 25-R Surface Vertical Rod: Series 24-V, 25-V

Concealed Vertical Rod: Series 24-C, 25-C Mortise: Series 25-M 11 Surface Vertical Rod: Series 24-V, 25-V Concealed Vertical Rod: Series 24-C, 25-C 12 Surface Vertical Rod: Series 24-V, 25-V

Concealed Vertical Rod: Series 24-C, 25-C

CERTIFIED OUTSIDE TRIMS Grade 1

ANSI FUNCTION TRIM DESIGNATION NUMBERS 02 24 Series: 710DT, 715DT, 717DT, 718DT 25 Series: 510DT, 512DT, 513K-DT 03 & 04 24 Series: 710NL, 718C 25 Series: 512NL, 510L-NL, 512TP-NL, 513K-NL 05 24 Series: 710TP, 718TP 25 Series: 512TP 06 24 Series: 710TP, 718TP 25 Series: 512TP-NL 08 24 Series: 711K 25 Series: 513K 24 Series: 712L 25 Series: 510L, 511L 09 24 Series: 711K 25 Series: 513K-NL 24 Series: 712L 25 Series: 510L-NL


84

Falcon Door Hardware (Continued) A156.3 Certified Exit Devices 11 24 Series: 719TL 12 24 Series: 719TL, 719TLP 14 24 Series: 711K-BE 25 Series: 513K-BE 24 Series: 712L-BE 25 Series: 510L-BE 15 24 Series: 710TP-BE, 718TP-BE 25 Series: 512TP-BE

• All Lever Trim Available with Avalon, Dane, Sutro, Quantum & Capri Lever Designs NOTES: 1) The prefix F in the licensee's catalog numbers indicates Fire Exit Hardware. 2) The prefix CD in the licensee's catalog numbers indicates Cylinder Dogging where

applicable. 3) The prefix LD in the licensee's catalog numbers indicates Less Dogging where

applicable. 4) All 24 and 25 Series devices are available with Electric Latch Retraction (EL) and

Electric Dogging (ED). 5) All 24 and 25 Series devices are available with Touch Bar Monitor (AE), Latch Bolt

Monitor (LM) and Touch Bar Monitor with Latch Bolt Monitor (DM). 6) All 24 and 25 Series devices are available with Key Override for Monitor Switches

(KOR). 7) All 24 and 25 Series concealed vertical rod exit devices are available for wood doors

(WDC). 8) The suffix LBR in the licensee's catalog numbers designates Less Bottom Rod feature for

surface vertical and concealed vertical rod devices. 9) The prefix EA and HWEA in the licensee's catalog numbers designates Exit Alarm. 10) Consult licensee's catalog for further information.

ASSOCIATED PRODUCTS ANSI Type Numbers Licensee's Catalog Designations Type 22: Removable Mullion 4023, CR-4023, 2923, F4023, CRF-4023

CERTIFIED FINISHES Finish Type Licensee's Symbol Brass with Clear Organic Coating US3, US4 Bronze with Clear Organic Coating US10 Brass, Bronze, or Zinc Chrome Plated US26D, US26 Painted/Coated over Steel, Brass or Bronze SP28, SP313 Stainless Steel US32D, US32


85


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.3 2001 Exit Devices Models listed in the U.L. Building Materials Directory or Mechanical Equipment Directory as conforming to ANSI/BHMA A156.3 2001 for Exit Devices, Grade 1 ANSI Type Device Type Licensee’s Designation Type 1 Rim 4500R, 4500RF Type 2 Surface Vertical Rod 4500V, 4500VF

CERTIFIED TRIMS – GRADE 1 ANSI Function Numbers Trim Type Licensee’s Designation 01 Exit Only -- 02 Dummy 45DT 03 Night Latch 45NL 08 Cylinder Cut-Out 45CE 14 Blank Escutcheon 45BE

ASSOCIATED PRODUCTS Type 22 Removable Mullion 4900 NOTES 1. Suffix “F” denotes Fire Rated Hardware


86

Hager Companies (Continued) A156.3 2001 Exit Devices

CERTIFIED FINISHES BHMA Code / Licensee’s Finish Type (Category) Designation Bright Brass, clear coated 707, 677 (605E) US3 Satin Brass, clear coated 688, 678 (606E) US4 Satin Bronze, clear coated 709, 680 (612E) US10 Dark Oxidized Satin Bronze, oil rubbed 710, 704 (613E) US10B Bright Chromium Plated over nickel 712, 681 (625E) US26 Satin Chromium Plated over nickel 713, 682 (626E) US26D Satin Stainless Steel 713 (626E), 630 US32D


87


19701 Da Vinci, Lake Forest, CA 92610 (949) 672-4000 www.k2commericalhardware.com

CERTIFIED EXIT DEVICES AND TRIM A156.3 2001

Models listed in the U.L Building Materials Directory of Mechanical Equipment Directory as conforming to ANSI/BHMA A156.3.2001 for Exit Device and Trim, Grade 1 unless otherwise noted.

ANSI Type Exit Device Series Numbers Device Type Function Type 1 Rim QED 111, QED 112, QED113, QED 311, QED 312, QED313 Type 2 Surface Vertical Rod QED 114, QED 115, QED116, QED 117, QED 118

QED 314, QED 315, QED316, QED 317, QED 318

License’s Catalog Designations:

ANSI Function Numbers Description Device Number(s) Trim Number 01 Rim QED111, QED112, QED113………. No Trim, QET190 Exit Only QED311, QED312, QED313………..No Trim, QET190

Surface QED114, QED115, QED116, & Vertical QED117, QED118…………………..No Trim, QET190

QED314, QED315, QED316, & QED317, QED318…………………..No Trim, QET190

02 Rim QED111……………………………..QET120, QET125, QRT120 Entrance by QED311……………………………..QET320, QET325, QRT120 Trim when Dogged Surface QED114, QED117…………………..QET120, QET125, QRT120

Vertical Rod QED314, QED317...………………...QET320, QET325, QRT320


88

K2 Commercial Hardware (Continued)


www.k2commericalhardware.com

ANSI Function Numbers Description Device Number(s) Trim Number 03 Rim QED111, QED112, QED113………..QET170, QET171, QET175, Key QET176, QRT170, QRT171 Retracts QED311, QED312, QED313………..QET370, QET371, QET375, Latchbolt QET376, QRT370, QRT371

Surface QED114, QED115, QED116, &

Vertical Rod QED117, QED118…………………..QET170, QET171, QET175 QET176, QRT170, QRT171

QED314, QED315, QED316, & QED317, QED318…………….…….QET370, QET371, QET375, QET376, QRT370, QRT371

04 Rim QED112……………………………..QET120, QET125, QRT120 Key Sets QED312……………………………..QET320, QET325, QRT120 Latchbolt in Retracted Surface QED115, QED118…………………...QET120, QET125, QRT120 Position QED315, QED318…………………...QET320, QET325, QRT320

05 Rim QED111, QED112, QED113………...QET165, QET166, Key Controls QED311, QED312, QED313………...QET365, QET366 Thumbpiece Surface QED114, QED115, QED116,

Vertical Rod QED117, & QED118…………………QET165, QET166 QED314, QED315, QED316, QED317, & QED318…………………QET365, QET366


89




ANSI Function Numbers Description Device Number(s) Trim Number

06 Rim QED111, QED112, QED113………...QET175, QET176, Key releases QED311, QED312, QED313………...QET375, QET376 Thumbpiece Surface QED114, QED115, QED116,

Vertical Rod QED117, & QED118…………………QET175, QET176 QED314, QED315, QED316, QED317, & QED318…………………QET375, QET376

08 Rim QED111, QED112, QED113………...QET161, QET161, Key Controls QRT160, QRT161 Lever QED311, QED312, QED313………...QET360, QET361,

QRT360, QRT361 Surface QED114, QED115, QED116,

Vertical Rod QED117, & QED118…………………QET160, QET161 QRT160, QRT161 QED314, QED315, QED316, QED317, & QED318…………………QET360, QET361,

QET360, QRT361 09 Rim QED111, QED112, QED113………...QET171, QET171, Key Controls QRT170, QRT171 Lever QED311, QED312, QED313………...QET370, QET371,

QRT360, QRT371 Surface QED114, QED115, QED116,

Vertical Rod QED117, & QED118…………………QET170, QET171 QRT170, QRT171 QED314, QED315, QED316, QED317, & QED318…………………QET370, QET371,

QET370, QRT371


90



www.k2commericalhardware.com ANSI Function Numbers Description Device Number(s) Trim Number

14 Rim QED111, QED112, QED113………...QET130, QRT130 Lever QED311, QED312, QED313………...QET330, QRT330 Always Surface QED114, QED115, QED116, Active Vertical Rod QED117, & QED118…………………QET130, QRT130

QED314, QED315, QED316, QED317, & QED318…………………QET330, QRT330

CERTIFIED FINISHES

Licensee’s

Finish Type BHMA Code Symbol Bright Brass with a Clear Organic Coating 605 3 Oxidized Satin Bronze, Appearance Equivalent 613E (704, 727) 10B Satin Chrome Plated 626 26D Aluminum Powder Coat 689 689 Dark Bronze Powder Coat 690 690


91

Kaba Ilco Corporation 2941 Indiana Avenue

Winston Salem, NC 27105 (336) 725-1331

www.kaba-ilco.com

CERTIFIED EXIT TRIM

ANSI/BHMA A156.3 Grade 1

Licensee’s Catalog Designations Simplex Series Compatible Exit Devices 5000 Series Arrow S1250, S3800 Corbin Russwin 5200 / 5200A Detex 10 / F10 Dorma 9300 / 9300F Monarch 18F / F-18R Precision 21 / FL21 Sargent 2828 / 3828 / 8800 / 8888 Von Duprin 22 / 22F / 98 / 98F / 99 / 99F Yale 7100 E-Plex Series Compatible Exit Devices E5000, E5200, Arrow S1250, S3800 Corbin Russwin 5200 / 5200A E5700 Detex 10 / F10 Dorma 9300 / 9300F Monarch 18F / F-18R Precision 21 / FL21 Sargent 2828 / 3828 / 8800 / 8888 Von Duprin 22 / 22F / 98 / 98F / 99 / 99F Yale 7100

CERTIFIED FINISHES Chrome over Zinc 626E Bright Chrome over Zinc 625E Satin Brass over Zinc 606E Bright Brass over Zinc 605E Black 676 Duranodic - Dark Bronze 695


92

Kaba Ilco Corporation (Continued)

2941 Indiana Ave Winston Salem, NC 27105

(336) 725-1331

CERTIFIED EXIT TRIM ANSI/BHMA A156.3

Grade 1 PowerLever Series Exit Trims Compatible Exit Devices 455AS, 455AI, 456AS, 456AI Von Duprin 98, 99, 98-F and 99-F 900AS, 900AI, 155AS, 155AI 455BS, 455BI, 456BS, 456BI Von Duprin 22 and 22-F 900BS, 900BI, 155BS, 155BI 455CS, 455CI, 456CS, 456CI Sargent 8888 & 12-8888 900CS, 900CI, 155CS, 155CI Arrow S3801, S3803, F-S3801, F-S3803 455DS, 455DI, 456DS, 456DI Dorma 9300 & F9300 900DS, 900DI, 155DS, 155DI 455ES, 455EI, 456ES, 456EI Precision 1103, FL1103 900ES, 900EI, 155ES, 155EI 455FS, 455FI, 456FS, 456FI Monarch 18-R and F-18-R 900FS, 900FI, 155FS, 155FI 455GS, 455GI, 456GS, 456GI Yale 2100, 2100F, 7000, 7000F 900GS, 900GI, 155GS, 155GI Corbin Russwin ED5000, ED5000A 455HS, 455HI, 456HS, 456HI Precision 2100, 2100F 900HS, 900HI, 155HS, 155HI

CERTIFIED FINISHES Finish Type Licensee’s Symbols Black-Wrinkle Polyester Powder Coat over E-coat BL Satin Chrome 626E (26D)


93

MONARCH HARDWARE


INDIANAPOLIS, IN 46219 (317) 613-8944


Models listed in the U.L. Mechanical Equipment Directory or Fire Resistance Directory as conforming to the American National Standard for Exit Devices ANSI/BHMA A156.3 (2008). Grade 1 Devices: Rim Device: Series 17-R, 18-R, 19-R, XX-R Surface Vertical Rod Device: Series 17-V, 18-V, 19-V, XX-V Concealed Vertical Rod Device: Series 17-C, 18-C, XX-C Mortise Device: Series 18-M, XX-M Three Point Latching Device: Series 18TPL

ANSI/BHMA EXIT DEVICE TYPES Type 1 Rim: Series 17-R, 18-R, 19-R, XX-R Type 2 Surface Vertical Rod: Series 17-V, 18-V, 19-V, XX-V Type 3 Mortise: Series . 18-M, XX-M Type 4 Narrow Stile Rim: Series 17-R, 19-R Type 5 Narrow Stile Surface Vertical Rod: Series 17-V, 19-V. Type 6 Narrow Stile Concealed Vertical Rod: Series 17-C Type 8 Metal Door Concealed Vertical Rod: Series 17-C, 18-C, XX-C Type 11 Multipoint Comb. Mort. & Surface Vertical Rod: 18-TPL Type 22 Removable Mullions: 2923, 4023, CR-4023, F4023, CRF- 4023

ANSI FUNCTION LICENSEE’S DEVICE DESIGNATIONS NUMBERS 01 Rim: Series 17R, 18R, 19R, XXR.

Surface Vertical Rod: Series 17V,18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 17M, 18M, XXM. Three Point Latching: Series 18TPL. 02 Rim: Series 17R, 18R, 19R, XXR.

Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series17C, 18C, XXC.

Mortise: Series 17M, 18M, XXM. Three Point Latching: Series 18TPL. 03 Rim: Series 17R, 18R, 19R, XXR.


94

Monarch Hardware (continued)

ANSI FUNCTION LICENSEE’S DEVICE DESIGNATIONS NUMBERS

Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 17M, 18M, XXM.

04 Rim: Series 17R, 18R, 19R, XXR. Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 17M, 18M, XXM. Three Point Latching: Series 18TPL. 05 Rim: Series 17R, 18R, 19R, XXR.

Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series17C, 18C, XXC. Mortise: Series 18M, XXM. 06 Rim: Series 17R, 18R, 19R, XXR. Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC.

Mortise: Series 18M, XXM. 07 Rim: Series 18R, XXR. Surface Vertical Rod: Series 18V Mortise: Series 18M, XXM. 08 Rim: Series 17R, 18R, 19R, XXR. (KNOB) Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 18M, XXM. Three Point Latching: Series 18TPL. 08 Rim: Series 17R, 18R, 19R, XXR. (LEVER) Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 17M, 18M, XXM. Three Point Latching: Series 18TPL. 09 Rim: Series 17R, 18R, 19R, XXR. (KNOB) Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 18M, XXM. Three Point Latching: Series 18TPL. 09 Rim: Series 17R, 18R, 19R, XXR. (LEVER) Surface Vertical Rod: Series 17V, 18V, 19V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. Mortise: Series 17M, 18M, XXM. Three Point Latching: Series 18TPL. 10 Rim: Series 18R, XXR. (KNOB) Mortise: Series 18M, XXM. 10 Rim: Series 18R, XXR. (LEVER) Surface Vertical Rod: Series 18V Mortise: Series 18M, XXM.


95


ANSI FUNCTION LICENSEE’S DEVICE DESIGNATIONS NUMBERS 11 Surface Vertical Rod: Series 17V, 18V, XXV. Concealed Vertical Rod: Series 17C, 18C, XXC. 12 Surface Vertical Rod: Series 17V, 18V, XXV.

Concealed Vertical Rod: Series 17C, 18C, XXC.

CERTIFIED OUTSIDE TRIMS Grade 1

ANSI FUNCTION TRIM DESIGNATION NUMBERS Previous Designations Shown in Parentheses ( ) 02 17 Series: 710DT (DT Control), 715DT (DT Standard), 717DT (DT), 718DT

(TDT) 18 Series: 717DT (DT), 718DT (TDT), 812L-DT 19 Series: 910DT (DT Control), 930DT (Centron), 917DT (Centron) XX Series: 717DT (DT), 718DT (TDT), 812L-DT 03 & 04 17 Series: 710NL (P Control), 718C (C Delta) 18 Series: 710NL (P Control), 718C (C Delta), 810NL (P Apollo), 815NL

(P Standard), 820NL (P Zephyr) 19 Series: 930NL (P Control), 930C ( P Control) XX Series: 710NL (P Control), 718C (C Delta) 05 17 Series: 710TP (T Delta), 718TP (T Delta) 18 Series: 718TP (T Delta), 810TP (T Apollo), 815TP (T Standard), 820TP

(T Zephyr) 19 Series: 910TP (T Control) XX Series: 718TP (T Delta), 810TP (T Apollo), 815TP (T Standard), 820TP

(T Zephyr) 06 17 Series: 710TP (T Delta), 718TP (T Delta) 18 Series: 718TP (T Delta), 810TP (T Apollo), 815TP (T Standard), 820TP (T Zephyr) 19 Series: 910TP (T Control) XX Series: 718TP (T Delta), 810TP (T Apollo), 815TP (T Standard), 820TP 07 18 Series: 718TP2 (T Delta), 810TP2 (T Apollo), 815TP2 (T Standard), 820TP2 (T Zephyr) XX Series: 718TP2 (T Delta), 810TP2 (T Apollo), 815TP2 (T Standard),

820TP2 (T Zephyr) 08 17 Series: 711K (K Control) (Knob) 18 Series: 711K (K Control), 811K (K Control) 19 Series: 911K (K Control) XX Series: 711K (K Control), 811K (K Control)


96


ANSI FUNCTION TRIM DESIGNATION NUMBERS Previous Designations Shown in Parentheses ( ) 08 17 Series: 712L (L Control) (Lever) 18 Series: 712L (L Control), 812L (L Control) 19 Series: 912L (L Control) XX Series: 712L (L Control), 812L (L Control) 09 17 Series: 711K (K Control) (Knob) 18 Series: 711K (K Control), 811K (K Control) 19 Series: 911K-NL (K Control) XX Series: 711K (K Control), 811K (K Control) 09 17 Series: 712L (L Control) (Lever) 18 Series: 712L (L Control), 812L (L Control) 19 Series: 912L-NL (L Control) XX Series: 712L (L Control), 812L (L Control) 10 18 Series: 712K (K Control), 812K (K Control) (Knob) XX Series: 712K (K Control), 812K (K Control) 10 18 Series: 712L (L Control), 812L (L Control) (Lever) XX Series: 712L (L Control), 812L (L Control) 11 17 Series: 719TL (SL Delta), 719TLP (SLP Delta) 18 Series: 719TL (SL Delta), 719TLP (SLP Delta) XX Series: 719TL (SL Delta), 719TLP (SLP Delta) 12 17 Series: 719TL (SL Delta), 719TLP (SLP Delta) 18 Series: 719TL (SL Delta), 719TLP (SLP Delta) XX Series: 719TL (SL Delta), 719TLP (SLP Delta) 14 17 Series: 711K-BE (K Control) (Knob) 18 Series: 711K-BE (K Control), 811K-BE (K Control) 19 Series: 911K-BE (K Control) XX Series: 711K-BE (K Control) 811K-BE (K Control) 14 17 Series: 712L-BE (L Control) (Lever) 18 Series: 712L-BE (L Control), 812L-BE (L Control) 19 Series: 912L-BE (L Control) XX Series: 712L-BE (L Control), 812L-BE (L Control) 15 17 Series: 710TP-BE (T Delta), 718TP-BE (T Delta) 18 Series: 718TP-BE (T Delta), 810TP-BE (T Apollo), 815TP-BE (T Standard),

820TP-B (T Zephyr) 19 Series: 910TP-BE (T Control) XX Series: 718TP-BE (T Delta), 810TP-BE (T Apollo), 815TP-BE

(T Standard), 820TP-BE (T Zephyr)

• All Lever Trim Available with Avalon, Dane, Sutro, Quantum & Capri Lever Designs


97

Monarch Hardware (continued) NOTES: 1) The prefix "F" in the licensee's catalog numbers indicates Fire Exit Hardware. 2) The prefix "CD" in the licensee's catalog numbers indicates Cylinder Dogging where

applicable. 3) Surface vertical rod devices are supplied standard with pullman bolt for top and slidebolt

at bottom (V). For alternate pullman bolt at bottom, designate V1. 4) All 19, 18, and 17 Series devices are available with Electric Latch Retraction ("ELR"

prefix). 5) 18 Series Rim, Mortise and Concealed Vertical Rod Devices are available with delayed egress feature ("DE" or “DX” prefix). 6) All 19, 18, 17, and XX Series devices are available with security monitor, electric

lock/unlock (fail safe/fail secure) functions. 7) All 18, 17 and XX Series concealed vertical rod exit devices are available for wood doors

("WDC" prefix). 8) The suffix "LBR" in the licensee's catalog numbers designates Less Bottom Rod feature

for surface vertical and concealed vertical rod devices. 9) Three Point Latching devices (TPL) are supplied standard with a mortise lock and

pullman bolt for top and slidebolt at bottom. 10) The prefix "EA" in the licensee's catalog numbers designates Exit Alarm for 19, 18, and

17 Series devices. 11) The suffix "ST" in the licensee's catalog numbers designates Security Lever Trim. 12) All 19, 18, and 17 Series devices are available with Electric Dogging ("ED" prefix). 13) Consult licensee's catalog for further information.

ASSOCIATED PRODUCTS ANSI Type Numbers Licensee's Catalog Designations Type 22: Removable Mullion 4023, CR-4023, 2923, F4023, CRF-4023

CERTIFIED FINISHES

Finish Type Licensee's Symbol Brass with Clear Organic Coating US3, US4 Bronze with Clear Organic Coating US9, US10 Brass, Bronze, or Zinc Chrome Plated US26D, US26 Painted/Coated over Steel, Brass or Bronze US19, SP28, SP313 Stainless Steel US32D, US32


98

CERTIFIED EXIT DEVICES/TRIM ANSI/BHMA A156.3 2001, GRADE 1

ANSI Device Type Exit Device Series

Type 1 Rim ……………………….. 2100, FL2100, HC2100, FLHC2100, 21, FL21,

100, R100, FL100, FLR100, 5100, FL5100 Type 2 Surface Vertical Rod ……… 2200, FL2200, HC2200, FLHC2200, 22, FL22, 200, FL200, 5200, FL5200 Type 3 Mortise ….………………… 2300, FL2300, HC2300, FLHC2300, 300, FL300 Type 4 Narrow Rim ………………. 2400, FL2400 Type 6 Metal Door Narrow Concealed Vertical Rod …... 2600, FL2600 Type 7 Wood Door Concealed Vertical Rod …… 2700, FL2700 Type 8 Metal Door Concealed Vertical Rod …… 2800, FL2800, HC2800, FLHC2800

Licensee’s Catalog Designations:

ANSI

Function Description Device Number Trim Number

01 Rim 2101, FL2101, 21, FL21

Exit Only

101, R101, FL101, FLR101 … 4901, 1701, 2001

2401, FL2401 ………………. 2901, 2001 5101, FL5101 ………………. 501

Surface 2201, FL2201, 22, FL22 Vertical Rod 201, FL201 …………………. 4901, 1701, 2001 5201, FL5201 ………………. 501

Mortise 2301, FL2301, 301, FL301 …. 4901, 1701, 2001

Precision Hardware A Division of Stanley Security Solutions, Inc.


Phone: (317) 849-2250 Fax: (317) 595-7614 www.precisionhardware.com

http://www.precisionhardware.com/�


99

Precision Hardware (continued)

ANSI Function Description Device Number Trim Number

01 Exit Only Concealed Vertical Rod

2801, FL2801 ……………. 2701, FL2701 ……………. 2601, FL2601 …………….

4901, 1701 4901, 1701, 2001 2901

02 Exit Only Dummy Trim

Rim 2102, 21, 102, R102 ……... 2402 ……………………… 5102 ………………………

4902A, 1702A, 2002C 2902A, 2002C 602, 702A

Surface Vertical Rod

2202, 202, 22 …………….. 5202 ………………………

4902A, 1702A, 2002C 602, 702A

Mortise 2302, 302 ………………… 4902A, 1702A, 2002C

Concealed Vertical Rod

2802 ……………………… 2702 …………………….... 2602 ………………………

4902A, C1702A 4902A, 1702A, 2002C 2902A

03 Key Retracts Latchbolt

Rim 2103, FL2103, 21, FL21 103, R103, FL103, FLR103 2403, FL2403 …………… 5103, FL5103 ……………

4903A, 1703A, 2003C 2903A, 2003C 603, 703A

Surface Vertical Rod 2203, FL2203, 22, FL22,

203, FL203 ……………… 5203, FL5203 …………… 4903A, 1703A, 2003C

603, 703A

Mortise 2303, FL2303, 303, FL303 M4903A, 1703A, 2003C

Concealed Vertical Rod

2803, FL2803 ………..… 2703, FL2703 …………. 2603, FL2603 ………….

4903A, C1703A 4903A, 1703A, 2003C 2903A


100



04 Rim 2103CD, 21CD ………….. 4903A, 1703A, 2003C

Key Sets 2403CD ………………….. 2903A, 2003C Latchbolt in 5103CD ………………….. 603, 703A Retracted

Position Surface 2203CD, 22CD ………….. 4903A, 1703A, 2003C

Vertical Rod 5203CD ………………….. 603, 703A

Mortise 2303CD ………………….. M4903, 1703A, 2003C

Concealed 2803CD ………………….. 4903A, C1703A

Vertical Rod 2703CD ………………….. 4903A, 1703A, 2003C

2603CD .……………….… 2903A

05 Rim 2105, FL2105 1705A, 2005C Key Controls 105, FL105, R105, FLR105 Y1705A, Y2005C Thumb piece Surface 2205, FL2205 ……………. 1705A, 2005C Vertical Rod 205, FL205 ………………. Y1705A, Y2005C

Mortise 2305, FL2305, 305, FL305.. M1705A, M2005C

Concealed 2805, FL2805 ……………. C1705A Vertical Rod 2705, FL2705 ……………. 1705A, 2005C

08 Rim 2108, FL2108 ……………. 4908A, V4908A, Key 2408, FL2408 ……………. 2908A Controls 5108, FL5108 ……………. 808A Lever 108, FL108, R108, FLR108 Y4908A, VY4908A,

Surface 2208, FL2208 ……………. 4908A, V4908A, Vertical Rod 5208, FL5208 ……………. 808A 208, FL208 ………………. Y4908A, VY4908A Mortise 2308, FL2308, 308, FL308.. Concealed 2808, FL2808, 2708, FL2708 M4908A, VM4908A, Vertical Rod 2608, FL2608…………..…

4908A, V4908A, 2908A


101



10 Rim 2110, FL2110 ………….… 4908A,V4908A, 4914A,

Inside Key V4914A Controls Lever Mortise 2310, FL2310 ……………. M4908A,VM4908A, M4914A, VM4914A,

14 Rim 2114, FL2114 ……………. 4914A, Lever 114, R114, FL114, FLR114. Y4914A, Always 2414, FL2414 ……………. 2914A Active 5114, FL5114 ……………. 814A

Surface 2214, FL2214, 214, FL214. 4914A, Vertical Rod 214, FL214……………….. Y4914A, 5214, FL5214 ……………. 814A

Mortise 2314, FL2314, 314, FL314.. M4914A,

Concealed 2814, FL2814, 2714, FL2714 4914A, Vertical Rod 2614, FL2614 …………… 2914A

15 Rim 2115, FL2115 ……………. 1715A, 2015C Thumb Piece 115, FL115, R115, FLR115. Y1715A, Y2015C Always Active Surface 2215, FL2215 ……………. 1715A, 2015C Vertical Rod 215, FL215, R215, FLR215. Y1715A, Y2015C

Mortise 2315, FL2315, 315, FL315.. M1715A, M2015C

Concealed 2815, FL2815 …………….. C17105A Vertical Rod 2715, FL2715 ……….……. 1715A, 2015C


102


ASSOCIATED PRODUCTS

BHMA Type: Licensee’s Catalog Designations: Type 22: Removable Mullion 811, 822, KR822, FL822, FLKR822, HC822, HCKR822 FLHC822, FLHCKR822

CERTIFIED FINISHES

ANSI/BHMA US Description 600 USP Primed for Paint 605 US3 Polished Brass, Clear Coated 606 US4 Satin Brass, Clear Coated 612 US10 Satin Bronze, Clear Coated 613 US10B Dark Oxidized Satin Bronze 625 US26 Polished Chromium Plated 626 US26D Satin Chromium Plated 628 US28 Satin Aluminum, Clear Anodized 630 US32D Satin Stainless Steel 689 Aluminum Powder Coat 695 Dark Bronze Powder Coat

AVAILABLE OPTIONS

“ELR” = Electric Latch Retraction “CD” = Cylinder Dogging “DE” = Delayed Egress “LS, LDS” = Latch Bolt Monitoring “ALK” = Exit Alarm, Battery Powered “E” = Electric Lock/Unlock

Trim “ALW” = Exit Alarm, Remote Powered “TS, TDS” = Touchbar Monitoring “DS” = Door Position Monitoring

Options available for the Device Series as shown

“ELR” “DE” “ALK, ALW or WALW “

“TS, TDS, WTS, WTDS”

Rim …………… 2100, FL2100, 2100, FL2100 2100, FL2100 2100, FL2100 21 FL21, 21, FL21 21, FL21 21, FL21 2400, FL2400 2400, FL2400 2400, FL2400 2400, FL2400 5100, FL5100

Surface ………… 2200, FL2200 2200, FL2200 2200, FL2200 2200, FL2200 Vertical Rod 22 FL22 22, FL22 22, FL22 22, FL22 5200, FL5200


103


“ELR” “DE” “ALK, ALW or WALW”

“TS, TDS, WTS or WTDS”

Mortise …….….. 2300, FL2300 2300, FL2300 2300, FL2300 2300,

FL2300

Concealed ….… 2600, FL2600 2600, FL2600 2600, FL2600 2600,

FL2600 Vertical Rod 2700, FL2700 2700, FL2700 2700, FL2700 2700,

FL2700 2800, FL2800 2800, FL2800 2800, FL2800 2800,

FL2800

“CD” “LS,LDS” “E” “DS”

Rim ………….… 2100, 21 2100, FL2100 2100, FL2100

2100, FL2100

2400, 5100 21, FL21 21, FL21 2400,

FL2400 Surface ………… 2200, 22 2200, FL2200 2200, FL2200

2200, FL2200

Vertical Rod 5200 22, FL22 22, FL22

Mortise ………... 2300 2300, FL2300 2300, FL2300 2300,

FL2300 Concealed ……… 2600, 2700 2700, FL2700 2700, FL2700

2600, FL2600

Vertical Rod 2800 2800, FL2800 2800, FL2800 2700, FL2700

2800, FL2800

The “FL” indicates Fire Exit Hardware. The “LBR” indicates Less Bottom Rod. The “HC” indicates hurricane code compliant. The “V” indicates vandal resistant lever trim. 4900 trim available with A, B, C, D, lever styles. 1700, 2000 trim available with A, B, and C grip styles.

CONSULT LICENSEE’S CATALOG FOR FURTHER INFORMATION.


104


NEW HAVEN, CT 06511 203/562-2151


A156.3 2001

MODELS LISTED IN THE U.L. BUILDING MATERIALS DIRECTORY OR MECHANICAL EQUIPMENT DIRECTORY AS CONFORMING TO ANSI/BHMA A156.3-2001 FOR EXIT DEVICES GRADE 1: Rim Device: Models 2800, 12-2800, 2828, 12-2828, 3800, 12-3800, 3828, 12-3828, 8500, 8800, GL-8800, HC8800, 12-8800, 12-GL-8800, 12-HC8800, 8888, 12-8888, 9800, E828, 12-E828, E800, 12-E800, P888, 12-P888, P800, 12-P800 Surface Vertical Rod Device: Models 8700, HC8700, 12-8700, 12-HC8700, PP8700, 12-PP8700, PR8700, 12-PR8700, SP8700, 12-SP8700, 2700, 12-2700, 3727, 12-3727, NB8700, 12-NB8700, E700,12-E700, E727, 12-E727 Concealed Vertical Rod Device: Models PP8600, 12-PP8600, PR8600, 12-PR8600, SP8600, 12-SP8600, LP8600, 12-LP8600, LR8600, 12-LR8600, LS8600, 12-LS8600, MD8600, WD8600, 12-MD8600, 12-WD8600 Mortise Device: 8900, 12-8900 ANSI Function Licensee’s Catalog Designations Numbers 01 Rim: 2828, 3828, E828, 12-2828, 12-3828, 12-E828, 2828 x 28-E-

GTB, 3828 x 28-E-GTB, E828 x 28-E-GTB, 12-2828 x 28-E-GTB, 12-3828 x 28-E-GTB, 12-E828 x 28-E-GTB, 8510, 8810, GL-8810, HC8810, 12-8810, 12-GL-8810, 12-HC8810, 8888, 12-8888, P810, GL-P810, 12-P810, 12-GL-P810, 9810*,12-9810* and 9898* Surface Vertical Rod: 2710, 3727, E710, E727, 12-3727, 12-2710, 12-E710, 12-E727, 8710, HC8710, 12-8710, 12-HC8710, PP8710, PR8710, SP8710, 12-PP8710, 12-PR8710, 12-SP8710, 9710*, 12-9710*, NB8710, 12-NB8710 Concealed Vertical Rod: 8410*,12-MD8410*, MD8610, 12- MD8610, WD8610, 12-WD8610, PP8610,12-PP8610, PR8610, 12-PR8610, SP8610, 12-SP8610, LP8610, 12-LP8610, LR8610, 12-LR8610, LS8610, 12-LS8610

Mortise: 8310*, 12-8310*, 8910, 12-8910, 9910*, 12-9910* * DENOTES MODELS LISTED IN THE U.L. BUILDING MATERIALS DIRECTORY OR MECHANICAL EQUIPMENT DIRECTORY AS CONFORMING TO ANSI/BHMA A156.3-1994 FOR EXIT DEVICES GRADE 1


105

SARGENT MANUFACTURING COMPANY-cont’d

CERTIFIED EXIT DEVICES A156.3

ANSI Function Licensee’s Catalog Designations 02 Rim: 2828 x 28-D-GTB, 3828 x 28-D-GTB, E828 x 28-D-GTB,

8510-DT, 8810-DT, GL-8810-DT, HC8810-DT, 8888-DT, P810-DT, GL-P810-DT, P888-DT, 9810-DT* and 9898-DT* Surface Vertical Rod: 2710-DT, E710-DT, 3727 x 28-D-GTB, E727 x 28-D-GTB, 8710-DT, HC8710-DT, PP8710-DT, PR8710-DT, SP8710-DT and 9710-DT*, NB8710-DT Concealed Vertical Rod: 8410-DT*, MD8610-DT, WD8610-DT, and PP8610-DT, PR8610-DT, SP8610-DT, LP8610-DT, LR8610-DT, LS8610-DT,

Mortise: 8310-DT*, 8910-DT, 9910-DT* 03 Rim: 2804, 12-2804, 3828, 12-3828, E804, 12-E804, 2828 x 28-

K-HTB, 12-2828 x 28-K-HTB, E828 x 28-K-HTB, 12-E828 x 28-K-HTB, 3828 x 28-K-HTB, 12-3828 x 28-K-HTB, 8504, 8804, HC8804, GL-8804, 12-GL-8804, 12-8804, 12-HC8804, 8888, 12-8888, P801, GL-P801, 12-GL-P804, 12-P804, P888, 12-P888, 9804*, 12-9804* and 9898*

Mortise: 8304*, 12-8304*, 8904, 12-8904, 9904*, 12-9904* 04 Rim: 16-2828 x 28-D-GTB, 16-3828 x 28-D-GTB, 16-8510-DT,

16-8810-DT, 16-GL-8810-DT, 16-HC8810-DT, 16-P810-DT, 16-GL-P810-DT, and 16-9810* Surface Vertical Rod: 16-2727 x 28-D-GTB, 16-3727 x 28-D-GTB, 16-8710-DT, 16-HC8710-DT and 16-9710*, 16-PP8710-DT, 16-PR8710-DT, 16-SP8710-DT Concealed Vertical Rod: 16-8410-DT*, 16-MD8610-DT, 16-WD8610-DT and 16-PP8610-DT, 16-PR8610-DT, 16-SP8610-DT, 16-LP8610-DT, 16-LR8610-DT, 16-LS8610-DT

Mortise: 16-8310-DT*, 16-8910-DT, 16-9910-DT* 05 Rim: 8863, 12-8863, 9863*, 12-9863* and 9898*

Surface Vertical Rod: 8763, HC8763, 12-8763, 12- HC8763, 9763*, 12-9763* Mortise: 9363*, 12-9363*, 9963*, 12-9963*

06 Surface Vertical Rod: 8762, HC8762, 12-8762, 12- HC8762 07 Rim: 8866, 12-8866 Mortise: 8966, 12-8966


106



ANSI Function Licensee’s Catalog Designations

08 Rim: 2828, 12-2828, 3828, 12-3828, E828, 12-E828, 8513, 8813, GL-8813, HC8813, 12-8813, 12-GL-8813, 12-HC8813, P813, GL-P813, 12-P813, 12-GL-P813, 9813* and 12-9813*

Surface Vertical Rod: 2727, 12-2727, 3727, 12-3727, E727, 12-E727, 8713, HC8713, 12-8713, 12-HC8713, PP8713, 12-PP8713, PR8713, 12-PR8713, SP8713, 12-SP8713, 9713*, 12-9713*, NB8713, 12-NB8713 Concealed Vertical Rod: 8413*, 12-MD8413*, MD8613, WD8613, 12-MD8613, 12-WD8613, PP8613, 12-PP8613, PR8613, 12-PR8613, SP8613, 12-SP8613, LP8613, 12-LP8613, LR8613, 12-LR8613, LS8613, 12-LS8613

Mortise: 8313*, 12-8313*, 8913, 12-8913, 9913* and 12-9913*

09 Rim: 2828 x 28-N-LL, 12-2828 x 28-N-LL, 3828 x 28-N-LL, 12-3828 x 28-N-LL, E828 x E8-N-LL, 12-E828 x E8-N-LL, 8806, GL-8806, 12-8806, 12-GL-8806, P806, GL-P806, 12-P806, 12-GL-P806 Surface Vertical Rod: 2727 x 28-N-LL, 12-2727 x 28-N-LL, 3727 x 28-N-LL, 12-3727 x 28-N-LL, E727 x E8-N-LL, 12-E727 x E8-N-LL, 8706, HC-8706, 12-8706, 12-HC8706, PP8706, 12-PP8706, PR8706, 12-PR8706, SP8706, 12-SP8706, 9706*, 12-9706*, NB8706, 12-NB8706

Concealed Vertical Rod: 8406*, 12-MD8606, MD8606, WD8606, 12-WD8606, PP8606, 12-PP8606, PR8606, 12-PR8606, SP8606, 12-SP8606, LP8606, 12-LP8606, LR8606, 12-LR8606, LS8606, 12-LS8606

10 Rim: 8816, 12-8816, GL-8816, 12-GL-8816, P816, 12-P816, GL-

P816, 12-GL-P816 and 9816* Mortise: 8916, 12-8916, 9916*, 12-9916* 11 Surface Vertical Rod: 8710 x 313, HC8710 x 313, 12-8710 x 313,

12-HC8710 x 313, 9710 x 313*, 12-9710 x 313* Concealed Vertical Rod: 8410 x 113*, 12-MD8410 x 113*, MD8610 x 113, 12-MD8610 x 113, 12-WD8610 x 113

12 Surface Vertical Rod: 8710 x 306, HC8710 x 306, 12-8710 x 306,

12-HC8710 x 306, 9710 x 306* and 12-9710 x 306* Concealed Vertical Rod: 8410 x 106*, MD-12-8410 x 106*, MD-8610 x 106, MD-12-8610 x 106, WD-8610 x 106, WD-12-8610 x 106


107



ASSOCIATED PRODUCTS

ANSI Function Licensee’s Catalog Designations

14 Rim: 2828 x 28-L-LL, 12-2828 x 28-L-LL, 3828 X 28-L-LL, 12-3828 X 28-L-LL, E828 x E8-L-LL, 12-E828 x E8-L-LL, 8515, 8815, GL-8815, 12-GL-8815, HC8815, 12-HC8815, P815, GL-P815, 12-GL-P815, 9815*, 12-9815*

Surface Vertical Rod: 8715, HC8715, 12-8715, 12-HC8715, PP8715, 12-PP8715, PR8715, 12-PR8715, SP8715, 12-SP8715, 9715*, 12-9715*, NB8715, 12-NB8715

Concealed Vertical Rod: 8415*, 12-MD8415*, MD8615, WD8615, 12-MD8615, 12-WD8615, PP8615, 12-PP8615, PR8615, 12-PR8615, SP8615, 12-SP8615, LP8615, 12-LP8615, LR8615, 12-LR8615, LS8615, 12-LS8615

Mortise: 8315*, 12-8315*, 8915, 12-8915, 9915*, 12-9915*

15 Rim: 8828, 12-8828, P828, 12-P828, 9828*, 12-9828* Surface Vertical Rod: 8728, 12-8728, 12-8728, 9728*, 12-

9728* Mortise: 8328*, 12-8328*, 8928, 12-8928, 9928*, 12-

9928* ANSI Type Numbers Licensee’s Catalog Designations Type 21: Door Coordinator 3487 and 3488 Type 22: Removable Mullion 980, 980S, 12-980, 950, L980, L980S, 12-L980, EL980,

HC980, 12-HC980, HD980, 12-HD980, ,

CERTIFIED FINISHES Finish Type Licensee’s Symbol (s)

Brass with a Clear Organic Coating US3, US4

Bronze with a Clear Organic Coating US9, US10, US10BL, US20D

Zinc Brass Plated with a Clear Organic Coating US3

Brass or Bronze, Chrome Plated US26, US26D

Stainless Steel US32, US32D

Clear Organic Coating with AGION Antimicrobial additive – SG Prefix


108



Notes: The Prefix 12 in the Licensee’s catalog numbers indicate fire exit hardware. The Prefix 16 represents a key actuated push pad or cross bar lock down feature called for in BHMA Function 04. The Prefix TL represents the push rail assembly with an illuminated touch pad with lettering “EXIT”. The Prefix 55 represents the push rail assembly with the signal switch. The Prefix 56 represents the push rail assembly with remote dogging/latch retraction. The Prefix 57 represents the Delayed Egress function with external magnet. The Prefix 58 represents the Electric Dogging. The prefix 59 represents the delayed egress function. Consult Licensee’s catalog for further information.

CERTIFIED TRIM

These devices have been examined in accordance with ANSI/BHMA A156.3-2001, Grade 1 requirements: STS, PTB, MAL, FLL, FLW, Free Wheeling ET Control, Lockable ET Control, 84/8500 Pull Handle, 862, 863 & 864 Offset Pull Trim, 88- Lever Handle Trims (88-K-LL, 88-D-LL, 88-C-LL, 88-L-LL) and P8- Lever Handle Trims (P8-K-LBL, P8-N-LBL, P8-C-LBL, P8-L-LBL). Anti-Vandal Trims 821, 824, 826, 827. These devices have been examined in allowance with ANSI/BHMA A156.3-1994 Grade 1: PRK Knob and 28- Lever Handle Trims (28-K-LL, 28-N-LL, 28-C-LL, 28-L-LL) These devices have been examined in accordance with ANSI/BHMA A156.3-1994, Grade 2 requirements: MAL 838, Pulls & Plates (28-K-GTB, 28-K-HTB, 28-D-GTB, 28-EGTB), Knob Trims (28-K-OB, 28-C-OB, 28-L-OB) and E8- Lever Handle Trims (E8-K-LL, E8-C-LL, E8-L-LL).


109

40 W Howard St., Pontiac, MI 48342-1280 Phone 248-335-7380, Fax 248-335-6868 E-mail [email protected] www.totaldoor.com

CERTIFIED EXIT DEVICES ALL MODELS ARE LISTED AND CONFORM TO UL 305 & UL 10B, ANSI/BHMA A156.3 2001 FOR EXIT DEVICES GRADE 1 AND UBC 7-2-1997 Openings TOTAL DOOR SYSTEMS exit devices are manufactured in two models, P14 and PF200, both of which are integrated with the door body and standard locking mechanisms. The devices are identical whether used on single, pair or double egress openings, and are rated for 3 hours for negative pressure and 3 hours for positive pressure. All panic devices function without vertical rods, coordinators, astragals, flush bolts or floor strikes. Openings panic devices are not dependent on thumb piece and turnpiece trim, thus functions 05, 06, 07, 11 and 12 are not used. The panic devices eliminate dependence on types 1 through 26, and the panics are the same for wood or metal doors. Non fire rated devices are available with Allen key (D) or cylinder (CD) dogging. Panics may be locked for exiting when tied into the alarm system and provided with the proper safeguards. Other Electric door locking functions may also be used with these panics.

CERTIFIED EXIT DEVICES GRADE 1, MODEL P14 ANSI FUNCTION TOTAL DOOR FUNCTION DESCRIPTION NUMBERS NUMBERS 01 PEO Exit only - no trim GP 01/LP 01 Entrance by operating grip or lever- never locked GP 1.5/LP 1.5 Inoperative outer trim - exit only 08 GP 05/LP 05 Entrance by operating grip or lever

- key locks or unlocks trim 03, 09 GP 07/LP 07 Entrance by operating grip or lever only when released by key. Key removable only when door

is locked

Certified finishes available on Model P14 are ANSI #'s 628, 710, 716, and special finishes and champagne anodized. Other inserted finishes are available on special order.


110

Total Door (Continued) Notes: 1. Model P14 exit device mounts on the face of the door with a maximum projection of 1 5/16". 2. Panic MODEL P14 integrates the panic, locking mechanism, and the locking channel, eliminating vertical rods, astragals, flush bolts, coordinators and floor strikes. 3. The device is identical for single, pair, double egress and removable mullion. 4. All devices comply with negative and positive pressure labels and ADA. 5. For model designations and descriptions refer to Licensee's catalogue or web site "www.totaldoor.com".

CERTIFIED EXIT DEVICES GRADE 1, MODEL PF200 ANSI FUNCTION TOTAL DOOR FUNCTION DESCRIPTION MODEL PF200 NUMBERS NUMBERS 01 PFEO Exit only - no trim

GPF 01/LPF 01 Entrance by operating grip or lever trim, never locked

GPF 1.5/LPF 1.5 Inoperative outer trim, exit only

08 GPF 05/LPF 05 Entrance by operating grip or lever Key locks or unlocks trim

03, 09 GPF 07/LPF 07 Entrance by operating grip or lever only when released by key. Key removable only when door is locked Certified finishes available on Model PF200 are ANSI #'s 628, 710, 711, 716 and special finishes. Other finishes are available such as champagne anodized, natural wood veneers, HPL, FRP, and rigid vinyl. Notes;

1. Model PF200 exit device mounts within the door and has a maximum projection of 5/8” when latched and 1/8” when open.

2. The device itself is 4 3/8” tall and 24” or 14” wide.

3. Panic MODEL PF200 integrates the panic, locking mechanism, and the locking channel, eliminating vertical rods, astragals, flush bolts, coordinators and floor strikes.

4. The device is identical for single, pair, double egress and removable mullion.

5. All devices comply with negative and positive pressure labels and ADA.

6. Openings TOTAL DOOR exit devices do not resemble any of the standard types 1 through 26 described by BHMA.

7. For model designations and descriptions refer to Licensee's catalogue or web site "www.totaldoor.com".


111

VON DUPRIN


INDIANAPOLIS, IN 46219 (317) 613-8944

Models listed in the U.L. Mechanical Equipment Directory or Fire Resistance Directory as conforming to the American National Standard for Exit Devices ANSI/BHMA A156.3 (2008). Grade 1 Devices: Rim: Series 22, 2670, 33, 33A, 35, 35A, 55, 88, 98, 99, XP98 and XP99. Surface Vertical Rod: Series 22, 33, 33A, 35, 35A, 88, 98 & 99. Concealed Vertical Rod: Series 33, 33A, 35, 35A, 55 (5547-F, 5547WDC), 88, 94, 95, 98 & 99. Mortise: Series 55, 88, 94, 95, 98 & 99. Three Point Latching: Series 98 & 99. Grade 2 Devices: Concealed Vertical Rod: Series 5547 Note: Refer to Licensee’s product catalogs for specific model designations.

ANSI/BHMA EXIT DEVICE TYPES Type 1 Rim: Series 22, 88, 98 & 99. Type 2 Surface Vertical Rod: Series 22, 88, 98 & 99. Type 3 Mortise: Series 55, 88, 94, 95, 98 & 99. Type 4 Narrow Stile Rim: Series 33A, 35A & 55. Type 5 Narrow Stile Surface Vertical Rod: Series 33A, 35A. Type 6 Narrow Stile Concealed Vertical Rod: Series 33A, 35A & 55. Type 7 Wood Door Concealed Vertical Rod: Series 33A, 35A, 55, 98,99. Type 8 Metal Door Concealed Vertical Rod: Series 88, 94, 95, 98 & 99. Type 9 Combination Rim & Surface Vertical Rod: Series 98 & 99. Type 22 Removable Fire Mullion: 9854, 9954, KR9854 & KR9954 Removable Panic Mullions: 1654, 4754, 4854, 4954, KR4954, KR4854,

5654 & 5754 ANSI FUNCTION LICENSEE’S DEVICE DESIGNATIONS NUMBERS 01 All of the above. 02 All of the above. 03 & 04 Rim: Series 22, 2670, 33A, 35A, 55, 88, 98, 99, XP98 and XP99. Surface Vertical Rod: Series 22, 98 & 99. Concealed Vertical Rod: Series 55, 98 & 99. Mortise: Series 55, 88, 94, 95, 98 & 99. Three Point Latching: Series 98 & 99.


112

Von Duprin (Continued) 05 Rim: Series 22, 33A, 35A, 88, 98, 99, XP98 and XP99. Surface Vertical Rod: Series 22, 33A, 35A, 88, 98 & 99. Concealed Vertical Rod: Series 33A, 35A, 98 & 99. Mortise: Series 88, 98 & 99. Three Point Latching: Series 98 & 99. 06 Rim: Series 33, 33A, 35, 35A. Surface Vertical Rod: Series 33A, 35A & 88. Concealed Vertical Rod: Series 33A, 35A.

07 Rim: Series 98 & 99. Mortise: Series 98 & 99. 08 All of the above.

09 Rim: Series 33A, 35A & 88. Surface Vertical Rod: Series 33A, 35A. Concealed Vertical Rod: Series 33A, 35A, 55, 88, 94 & 95.

Mortise: Series 55, 88, 94 & 95. 10 Rim: Series 98 & 99. Mortise: Series 98 & 99. 11 & 12 Rim: Series 33A, 35A. Surface Vertical Rod: Series 22, 33A, 35A, 88, 98 & 99. Concealed Vertical Rod: Series 33A, 35A,55, 88, 94, 95, 98, 99. Three Point Latching: Series 98 & 99. 13 Rim: Series 98 and 99.

GRADE 1, OUTSIDE TRIM

ANSI FUNCTION TRIM DESIGNATION NUMBER (see Licensee’s catalog for device/trim combinations) 01 880EO, 990EO.

02 210DT, 333DT, 337DT, 386DT, 3308DT, 550DT, 696DT, 697DT, 880DT, 990DT, 991K-DT, 992L-DT, 994L-DT, 996L-DT, 370L-DT, 360L-DT, 372L-DT, 373L-DT.

03 & 04 110NL, 210NL, 334NL-OP, 386NL, 388NL, 3308NL, 555NL, 556NL, 606K-Rigid, 608NL, 696NL, 697NL, 880K-Rigid, 880NL, 990NL, 991K-NL, 992L-NL, 994L-NL, 996L-NL.

05 230TP, 333TP, 337TP, 608TP, 696TP, 697TP, 880TP, 990TP. 06 333NL-TP, 337NL-TP, 880TP. 07 696TP, 697TP, 990TP.

08 230L, 360L, 371L, 373L, LP373L, 375L, 606K, 880K, 991K, 992L, 993, WA993, 994L, 996L.

09 360L, 371L, 373L, LP373L, 375L. 10 992L, 994L, 996L.


113

Von Duprin (Continued) 11 360T, 374T, 376T, 377T. 12 360T, 374T, 376T, 377T. 14 230L-BE, 360L-BE, 371L-BE, 373L-BE, LP373L-BE, 375L-BE, 606K-

BE, 880K-BE, 991K-BE, 992L-BE, 994L-BE, 996L-BE. 15 230TP-BE, 333TP-BE, 337TP-BE, 608TP-BE, 696TP-BE, 697TP-BE,

880TP-BE, 990TP-BE. 16 360T-BE, 374T-BE, 376T-BE, 377T-BE.

Notes: 1. All 98 & 99 series exit devices available with Cylinder Dogging (CD or SD Prefix). 2. The 98 & 9927 Series are available in Windstorm option (WS Prefix). 3. All 33A, 35A, 98, 99, XP98 and XP99 series exit devices are available with Electric Latch Retraction (EL Prefix), Signaling Function (SS Prefix), Touch Bar Monitor (RX Prefix), and Latch Bolt Monitor (LX Prefix). 4. The 94 and 95 series exit devices are available with Electric Latch Retraction (EL Prefix) and Electric Dogging (QEL Prefix). 5. The 98 and 99 rim and mortise lock series exit devices are available with Electric Locking (E Prefix) to lock and unlock outside trim. 6. The 98 and 99 series devices are available with Delayed Egress (CX prefix). 7. Fire Exit Hardware devices are identified with “F” suffix. 8. Lever trim is available with lever styles 01, 02, 03, 06, 07, 12 & 17. 9. 22, 98 and 99 surface vertical and 33A, 35A, 94, 95, 98 and 99 concealed vertical rod devices are available less bottom rod and latch (LBR suffix). 10. 990 Series and 370 Trim available with Electric Locking (E Prefix).

CERTIFIED FINISHES Finish Type Licensee’s Symbol(s) Brass, with an Organic Coating US3, US4 Bronze, with an Organic Coating US9, US10 Bronze, Dull Oxidized and Oil Rub US10B Chrome on Brass, Bronze or Zinc *US26, *US26D Anodic Coating on Aluminum US28, US10AN, 313AN,

315AN Stainless Steel, 300 Series *US32, *US32D Paint/Powder Coatings US19, SP28, SP313, SPBLK * Available with Antimicrobial coating (AM Prefix)


114


(704) 283-2101

CERTIFIED EXIT DEVICES & TRIM ANSI/BHMA A156.3 – 2001

Models listed in the U.L. Mechanical Equipment Directory or Fire Resistance Directory as conforming to ANSI/BHMA A156.3 for exit devices and trim, Grade 1:

A156.3 - 2001 Rim Exit Devices: Series 1500(1), Series 2100(1)(10), Series 2150(1)(10), Series 7100(1)(2), Series 7150(1)(2), Series 7200(2)(3), Series 7250(2)(3) Surface Vertical Rod Devices: Series 2110(1)(10), Series 2170 (1)(5)(6)(7), Series 1510(1), Series 7110(1)(2), Series 7210(2)(3), Series 7170(1)(2)(5)(6)(7) Concealed Vertical Rod Exit Devices: Series 1520(1), Series 7120(1)(2), Series 7220(2)(3), Series 7160(2)(5)(6)(7) Mortise Exit Devices: Series 1530(1), Series 7130(1)(2)(4) Notes: (1) With and without suffix “F” (2) With and without any or all of the following suffixes: “A”, “B”,”D”, “G”, “O”, “P”, “S” (3) With and without suffixes “M”, “MF” (4) With and without suffixes “SAFE”, “SECURE” (5) With and without suffix “F90” (6) With and without suffix “LBR” (7) With and without suffix “-10” (8) Mullion fittings only (9) With and without suffix “-2”(for Series 7100, 7150, & 7130) (10) With and without suffix “A” Product series consist of individual models as shown in published manufacture’s catalog.

TRIM ANSI Function Number 01 Series 500, 620, 630 02 Series 500, 510, 540, 550, 620, 630, 650 03 Series 500, 510, 540, 550, 560, 620, 630, 650 05 Series 510, 630, 670


115

YALE COMMERCIAL LOCKS & HARDWARE – A156.3 (continued)

TRIM (continued)

06 Series 510, 630 08 Series 350, 500, 540, 620, 650 09 Series 500, 620 11 Series 500, 510 12 Series 500, 510

ASSOCIATED PRODUCTS Removable Mullions: M100, M100F, M300, KRM100, KRM100F, KRM150F M200FWS, KRM200FWS, M200, M200F, KRM200, KRM200F, KRM200E

CERTIFIED FINISHES

Finish type (ANSI/BHMA): Licensee’s Symbol(s)

Bright brass, clear coated 605 Satin brass, clear coated 606 Bright bronze, clear coated 611 Satin bronze, clear coated 612 Dark oxidized satin bronze, oil rubbed 613 Bright chrome plated 625 Satin chrome plated 626 Bright stainless steel 629 Satin stainless steel 630 Aluminum painted 689 Light bronze painted 691 Dark bronze hardcoat 695

Door Controls-Closers

ANSI/BHMA A156.4

2009 DIRECTORY

Door C

ontrols- C

losers


117

GENERAL INFORMATION

Closer Descriptions

PT Number Surface or Concealed in Door closers, Grade 1 PT 1 Surface or Concealed in Door closers, Grade 2 PT 2 Surface or Concealed in Door closers, Grade 3 PT 3 Surface or Concealed in Door closers, Options PT 4-A,C,D,E,F,G,H,J Concealed Overhead and Floor Closers, Grade 1 PT 5 Concealed Overhead and Floor Closers, Grade 2 PT 6 Concealed Overhead and Floor Closers, Grade 3 PT 7 Concealed Overhead and Floor Closers, Options PT 8-A,B,C,D,E,F,G,J,K,L,M

Series Numbers Series 1000 Traditional Type (2nd Numeral 1) Series 2000 Modern Type with Cover (2nd numeral 2) Series 3000 Modern Type No Cover (2nd numeral 3) Series 4000 Concealed in Door (2nd numeral 4) Series 5000 Overhead Concealed (2nd numeral 5) Series 6000 Floor Concealed (2nd numeral 6) Series 7000 Pivot Sets (2nd numeral 7)

Explanation of Identifying Numbers The first letter (C) denotes the organizational Section in BHMA responsible for this Standard. The first numeral indicates the material used: 0 - Optional material, i.e., the manufacturer's standard unless otherwise specified. The second numeral identifies the type of product: 1 Surface closers, traditional type 5 Overhead concealed closers 2 Surface closers, modern type with cover 6 Floor concealed closers 3 Surface closers, modern type with no

cover 7 Pivot sets

4 Concealed in door closers 9 Miscellaneous closers, includes dwarf and gate closers, and screen or combination storm door closers.

The third and fourth numerals identify the function or specific description of each item. The fifth numeral designates the grade classification of the item: 1-Grade 1, 2-Grade 2, 3-Grade 3. Example: C02051 C - Section (C) 0 - Material (optional) 2 - Type of product (surface closer, modern, cover) 05 - Function (holder arm, regular mounting) 1 - Grade (grade 1)

Please refer to the ANSI/BHMA A156.4 for further information.


118


CAL-ROYAL PRODUCTS, INC. 6605 FLOTILLA STREET COMMERCE, CA 90040 TEL: (323) 888-6601 & (800) 876-9258 FAX: (323) 888-6699 & (800) 222-3316 Email: [email protected]

A156.4- Certified Door Closers

GRADE 1 Series CR441- Full Cover Multi-Size Full Feature Closer ANSI TYPE PT4 Options LICENSEE’S CATALOG CO2011 A, B, C, D, H CR441, CR441DA A, B, C, D, F, H CR801, CR801S 730P, 740P, 750P, 730PBC 740PBC, 750PBC N900-PBF, N900-PBFDA

NOTES:

1. Suffix “DA” denotes DELAYED ACTION (Door Closers) CERTIFIED FINISHES FINISH TYPE BHMA CODE/ CATEGORY LICENSEE’S CATALOG Bright Brass 707, 677 (605E) US3 Satin Bronze 709, 680 (612E) US10 Antique Bronze Oiled 710, 704 (613E) US10B Bright Chrome 712, 681 (625E) US26 Satin Chrome 713, 682 (626E) US26D Satin Stainless Steel 713, 630 (626E) US32D Aluminum Painted 689 ALUM Dark Bronze 633 DURO Architectural Bronze 696 GOLD



119

CORBIN RUSSWIN, INC. 255 EPISCOPAL ROAD

BERLIN, CT 06037 (860) 225-7411

CERTIFIED DOOR CLOSERS

ANSI/BHMA A156.4-2000 Series 2000 – Modern Type with Cover ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C02011 A, B, C, D, F, H DC3200, DC3200 x A10 DC6200, DC6200 x A10 A, B, C, D, F DC6401 thru DC6406 DC6401 x A10, thru DC6406 x A10 A, B, C, D, F, H DC8200, D8200 x A10 C02021 A, B, C, D, F, H DC3210 DC3210 x A3 A, B, C, D, F, G, H DC3210 x (A4)(A11) A, B, C, D, F, H DC6210, DC6210 x A3 A, B, C, D, F, G, H DC6210 x (A4) (A11) A, B, C, D, F DC6411 thru DC6416 DC6411 x A3 thru DC6416 x A3 A, B, C, D, F, G DC6411 x (A4 (A11) thru DC6416 x (A4)(A11) A, B, C, D, F, H DC8210, DC8210 x A3, DC8210 x A4, DC8210 x A11

C02041 A, B, C, D, F, H DC3220 DC6220 DC6220 x A6, DC6220 x A7 A, B, C, D, F DC6421 thru DC6426 DC6421 x A6 thru DC6426 x A6 DC6421 x A7 thru DC6426 x A7 A, B, C, D, F, H DC8220, DC8220 x A6, DC8220 x A7 C02051 A, B, C, D, F, H DC3200 x A1 DC6200 x A1 A, B, C, D, F DC6401 x A1 thru DC6406 x A A, B, C, D, F, H DC8200 x A1 C02061 A, B, C, D, F, H DC3210 x A1 DC3210 x A2 A, B, C, D, F, G, H DC3210 x (A5)(A12)


120

A, B, C, D, F, H DC6210 x A1, DC6210 x A2 A, B, C, D, F, G, H DC6210 x (A5)(A12) A, B, C, D, F DC6411 x A1 thru DC6416 x A1 DC6411 x A2 thru DC6416 x A2 A, B, C, D, F, G DC6411 x (A5)(A12) thru DC6416 x (A5)(A12 A, B, C, D, F, H DC8210, DC8210 x A2, DC8210 x A5, DC8210 x A12

C02081 A, B, C, D, F, H DC3220 x A1 DC6220 x A1 DC6220 x A1 x A6 DC6220 x A1 x A7 A, B, C, D, F DC6421 x A1 thru DC6426 x A1 DC6421 x A1 x A6 thru DC6426 x A1 x A6 DC6421 x A1 x A7 thru DC6426 x A1 x A6 A, B, C, D, F, H DC8220 x A1, DC8220 x A1 x A6, DC8220 x A1 x A7 C02231 A, B, C, D, F, G, H DC6240 A, B, C, D, F, G DC6431 thru DC6436 A, B, C, D, F, H DC8240 C02241 A, B, C, D, F, G, H DC6240 x A1 A, B, C, D, G, H DC6441 x A1 thru DC6446 x A1 A, B, C, D, F, H DC8240 x A1 C02251 A, B, C, D, F, H DC6230 A, B, C, D, F DC6431 thru DC6436 A, B, C, D, F, H DC8230 C02261 A, B, C, D, F, H DC6230 x A1 A, B, C, D, F DC6431 x A1 thru DC6436 x A1 A, B, C, D, F, H DC8203 x A1 C02191* M80 C02201* M80 * Bracket for use with appropriate door closer see Manufacturer’s Catalog.


121

DORMA ARCHITECTURAL HARDWARE Dorma Drive

Reamstown, PA 17567 717-336-3881

www.dorma-usa.com

CERTIFIED DOOR CLOSERS A156.4, 2000

Series 2000 – Grade 1 Modern Type With Cover ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations C02011 A, D 7302-7305 COV D, G 7302-7305 IS/S-IS COV A, B, C, D, H 7436/7414 COV A, B, C, D, H, G 7436/7414 IS/S-IS COV A, B, C, D, F, H 7436/7414DA COV A, B, C, D, F, H, G 7436/7414DA IS/S-IS COV A, B, C, D, H, J 8916/8956, 8616 A, B, C, D, H, J, G 8916/8956 or 8616 IS/S-IS A, B, C, D, F, H, J 8916/8956DA or 8616DA A, B, C, D, F, H, J, G 8916/8956DA or 8616DA IS/S-IS C02051 D 7302-7305 FH/PH COV D, G 7302-7305 ISH/S-ISH COV A, B, C, D, H 7436/7414 FH/PH COV A, B, C, D, H, G 7436/7414 ISH/S-ISH COV A, B, C, D, F, H 7436/7414DA FH/PH COV A, B, C, D, F, H, G 7436/7414DA ISH/S-ISH COV A, B, C, D, H, J 8916/8956 or 8616 FH/PH A, B, C, D, H, J, G 8916/8956 or 8616 ISH/S-ISH A, B, C, D, F, H, J 8916/8956DA or 8616DA FH/PH A, B, C, D, F, H, J, G 8916/8956DA or 8616DA ISH/S-ISH C02021 A, D 7303-7305 ARP COV D, 7303-7305 SPA COV D, G 7303-7305 DS/S-DS COV A, B, C, D, H 7436/7414 ARP/SPA COV A, B, C, D, F, H 7436/7414DA ARP/SPA COV A, B, C, D, G, H 7436/7414 DS/S-DS COV A, B, C, D, F, G, H 7436/7414DA DS/S-DS COV


122

DORMA ARCHITECTURAL HARDWARE (continued)

ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations A, B, C, D, H, J 8916/8956 or 8616 AF89P/SPA A, B, C, D, F, H, J 8916/8956DA or 8616DA AF89P/SPA A, B, C, D, G, H, J 8916/8956 or 8616 DS/S-DS A, B, C, D, F, G, H, J 8916/8956DA or 8616DA DS/S-DS C02061 D 7303-7305 FHP/PHP/SPAT/SPAK COV D, G 7303-7305 DST/DSK/S-DST COV A, B, C, D, H 7436/7414 FHP/PHP/SPAT/SPAK COV A, B, C, D, F, H 7436/7414DA

FHP/PHP/SPAT/SPAK COV A, B, C, D, G, H 7436/7414 DST/DSK/S-DST COV A, B, C, D, F, G, H 7436/7414DA DST/DSK/S-DST COV A, B, C, D, H, J 8916/8956 or 8616 FHP/PHP/SPAT/SPAK A, B, C, D, G, H, J, 8916/8956 or 8616 DST/DSK/S-DST A, B, C, D, F, G, H, J 8916/8956DA or 8616DA DST/DSK/S-DST

C02031A, D 7302-7305 COV AB86 A, B, C, D, H 7436/7414 COV AB86 A, B, C, D, F, H 7436/7414DA COV AB86 A, B, C, D, H, J 8916/8956 AB89, 8616 AB86 A, B, C, D, F, H, J 8916/8956DA AB89, 8616DA AB86 C02071 D 7302-7305 FH COV AB86, 7302-7305 PH COV AB86 A, B, C, D, H 7436-7414 FH COV AB86, 7436-7414 PH COV AB86 A, B, C, D, F, H 7436-7414DA FH/PH COV AB86 A, B, C, D, H, J 8916/8956 FH/PH AB89, 8616 FH/PH AB86 A, B, C, D, F, H, J 8916/8956DA FH/PH AB89, 8616DA FH/PH AB86 C02041 A, D 7302-7305 COV D, G 7302-7305 IS/S-IS COV A, B, C, D, H 7436/7414 COV A, B, C, D, H, G 7436/7414 IS/S-IS COV A, B, C, D, F, H 7436/7414DA COV A, B, C, D, F, H, G 7436/7414DA IS/S-IS COV A, B, C, D, H, J 8916/8956 or 8616 A, B, C, D, H, J, G 8916/8956 or 8616 IS/S-IS A, B, C, D, F, H, J 8916/8956DA or 8616DA A, B, C, D, F, H, J, G 8916/8956DA or 8616DA IS/S-IS


123

DORMA ARCHITECTURAL HARDWARE (continued) ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations C02081 D 7302-7305 FH/PH COV D, G 7302-7305 ISH/S-ISH COV A, B, C, D, H 7436/7414 FH/PH COV A, B, C, D, G, H 7436/7414 ISH/S-ISH COV A, B, C, D, F, H 7436/7414DA FH/PH COV A, B, C, D, F, G, H 7436/7414DA ISH/S-ISH COV A, B, C, D, H, J 8916/8956 or 8616 FH/PH A, B, C, D, G, H, J 8916/8956 or 8616 ISH/S-ISH A, B, C, D, F, H, J 8916/8956DA or 8616DA FH/PH A, B, C, D, F, G, H, J 8916/8956DA or 8616DA ISH/S-ISH C02211 A, D, G 7305 JT COV A, B, C, D, G, H 7436 JT COV A, B, C, D, F, G, H 7436DA JT COV A, B, C, D, G, H, J 8916/8956 or 8616 JT/TDE A, B, C, D, F, G, H, J 8916/8956DA or 86161DA JT/TDE A, B, C, D, F, G, H TS93-1/TS93-5 T C02221 A, D, G 7305 JTH COV A, B, C, D, G, H 7436 JTH COV A, B, C, D, F, G, H 7436DA JTH COV A, B, C, D, G, H, J 8916/8956 or 8616 JTH/TDEH A, B, C, D, F, G, H, J 8916/8956DA or 8616DA JTH/TDEH A, B, C, D, F, H TS93-1/TS93-5 THO C02231 A, D, G 7305 PT86 COV A, B, C, D, G, H 7436 PT86 COV A, B, C, D, F, G, H 7436DA PT86 COV A, B, C, D, G, H, J 8916/8956 PT89, 8616 PT86 A, B, C, D, F, G, H, J 8916/8956DA PT89, 8616DA PT86 A, B, C, D, F, H TS93-1/TS93-5 PT C02241 A, D, G 7305 PT86H COV A, B, C, D, G, H 7436 PT86H COV A, B, C, D, F, G, H 7436DA PT86H COV A, B, C, D, G, H, J 8916/8956 PT89H, 8616 PT86H A, B, C, D, F, G, H, J 8916/8956DA PT89H, 8616DA PT86H A, B, C, D, F, H TS93-1/TS93-5 PTHO


124

DORMA ARCHITECTURAL HARDWARE (continued) ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations C02251 A, D, G 7305 T COV A, B, C, D, G, H 7436 T COV A, B, C, D, F, G, H 7436DA T COV A, B, C, D, G, H, J 8916/8956 or 8616 T A, B, C, D, F, G, H, J 8916/8956DA or 8616DA T C02261 A, D, G 7305 TH COV A, B, C, D, G, H 7436 TH COV A, B, C, D, F, G, H 7436DA TH COV A, B, C, D, G, H, J 8916/8956 or 8616 TH A, B, C, D, F, G, H, J 8916/8956DA or 8616DA TH C02271 A, D, G 7305 FT COV A, B, C, D, G, H 7436 FT COV A, B, C, D, F, G, H 7436DA FT COV A, B, C, D, G, H, J 8916/8956 or 8616 FT A, B, C, D, F, G, H, J 8916/8956DA or 8616DA FT C02281 A, D, G 7305 FTH COV A, B, C, D, G, H 7436 FTH COV A, B, C, D, F, G, H 7436DA FTH COV A, B, C, D, G, H, J 8916/8956 or 8616 FTH A, B, C, D, F, G, H, J 8916/8956DA or 8616DA FTH NOTE: For C02211 to C02281 refer to manufacturer’s catalog for specific sizing requirements. NOTE: For all 7400 Series closers, FC (full cover) may replace COV, (standard cover). For all 8616 Series closers, FC or FMC, (full metal cover) may be added. See manufacturer's catalog.


125


Series 3000 – Grade 1 Modern Type No Cover ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations C03011 A, D 7302-7305 D, G 7302-7305 IS/S-IS A, B, C, D, H 7436/7414 A, B, C, D, H, G 7436/7414 IS/S-IS A, B, C, D, F, H 7436/7414DA A, B, C, D, F, H, G 7436/7414DA IS/S-IS C03051 D 7302-7305 FH/PH D, G 7302-7305 ISH/S-ISH A, B, C, D, H 7436/7414 FH/PH A, B, C, D, G, H 7436/7414 ISH/S-ISH A, B, C, D, F, H 7436/7414DA FH/PH A, B, C, D, F, G, H 7436/7414DA ISH/S-ISH C03021 A, D 7303-7305 ARP D 7303-7305 SPA D, G 7303-7305 DS/S-DS A, B, C, D, H 7436/7414 ARP A, B, C, D, F, H 7436/7414DA ARP A, B, C, D, G, H 7436/7414 DS/S-DS A, B, C, D, F, G, H 7436/7414DA DS/S-DS C03061 D 7303-7305 FHP/PHP/SPAT/SPAK D, G 7303-7305 DST/DSK/S-DST A, B, C, D, H 7436/7414 FHP/PHP/SPAT/SPAK A, B, C, D, F, H 7436/7414DA FHP/PHP/SPAT/SPAK A, B, C, D, G, H 7436/7414 DST/DSK/S-DST A, B, C, D, F, G, H 7436/7414DA DST/DSK/S-DST C03031 A, D 7302-7305 AB73 A, B, C, D, H 7436/7414 AB74 A, B, C, D, F, H 7436/7414DA AB74 C03071 D 7302-7305 FH/PH AB73 A, B, C, D, H 7436/7414 FH/PH AB74 A, B, C, D, F, H 7436/7414DA FH/PH AB74 C03041 A, D 7302-7305 D, G 7302-7305 IS/S-IS A, B, C, D, H 7436/7414


126

DORMA ARCHITECTURAL HARDWARE (continued) ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations A, B, C, D, H, G 7436/7414 IS/S-IS A, B, C, D, F, H 7436/7414DA A, B, C, D, F, H, G 7436/7414DA IS/S-IS C03081 D 7302-7305 FH/PH A, B, C, D, H 7436/7414 FH/PH A, B, C, D, F, H 7436/7414DA FH/PH C03211 A, D, G 7305 JT A, B, C, D, G, H 7436 JT A, B, C, D, F, G, H 7436DA JT C03221 A, D, G 7305 JTH A, B, C, D, G, H 7436 JTH A, B, C, D, F, G, H 7436DA JTH C03231 A, D, G 7305 PT86 A, B, C, D, G, H 7436 PT86 A, B, C, D, F, G, H 7436DA PT86 C03241 A, D, G 7305 PT86H A, B, C, D, G, H 7436 PT86H A, B, C, D, F, G, H 7436DA PT86H C03251 A, D, G 7305 T A, B, C, D, G, H 7436 T A, B, C, D, F, G, H 7436DA T C03261 A, D, G 7305 TH A, B, C, D, G, H 7436 TH A, B, B, D, F, G, H 7436DA TH C03271 A, D, G 7305 FT A, B, C, D, G, H 7436 FT A, B, C, D, F, G, H 7436DA FT C03281 A, D, G 7305 FTH A, B, C, D, G, H 7436 FTH A, B, C, D, F, G, H 7436DA FTH NOTE: For C03211 to C03281 refer to manufacturer’s catalog for specific sizing requirements. NOTE: For 7400 or 8600 Series, the MJ or PD bracket may be used for most parallel arm applications. Also, the MJ bracket may be used for any hinge side application.


127


CERTIFIED DOOR CLOSERS A156.4, 2006

Series 2000 – Grade 3 Modern Type With Cover

ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations C02013 A, D 7203-7205 COV C02053 D 7203-7205 FH COV C02023 A, D 7203-7205 ARP COV C02063 D 7203-7205 FHP COV C02033 A, D 7203-7205 COV AB86 C02073 D 7203-7205 FH COV AB86 C02043 A, D 7203-7205 COV C02083 D 7203-7205 FH COV

Series 3000 – Grade 3 Modern Type No Cover ANSI Type No. PT 4 Options Certified Certified Licensee’s Series Designations C03013 A, D 7203-7205 C03053 D 7203-7205 FH C03023 A, D 7203-7205 ARP C03063 D 7203-7205 FHP C03033 A, D 7203-7205 AB86 C03073 D 7203-7205 FH AB86 C03043 A, D 7203-7205 C03083 D 7203-7205 FH


128


Series 6000 - Floor Concealed ANSI Type No. PT 8 Options Certified Certified Licensee’s Series Designations C06011 A, E, J, K BTS 80/A, BTS 80/B A, C, E, K BTS 80/A, BTS 80/B A, B, D, E, K, L, M BTS 75V/A, BTS 75V/B A, B, D, E, J, L, M BTS 75V BF/A, BTS 75V BF/B C06021 A, E, J, K BTS 80/G, BTS 80/H A, C, E, K BTS 80/G, BTS 80/H A, B, D, E, K, L, M BTS 75V/G, BTS 75V/H A, B, D, E, J, L, M BTS 75V BF/G, BTS 75V BF/H C06031 A, J, K BTS 80/I A, C, K BTS 80/I A, B, D, K, L, M BTS 75V/I A, B, D, J, L, M BTS 75V BF/I

C06041 A, E, K BTS 80/F, BTS 80/E A, E, J, K BTS 80/D A, C, E, K BTS 80/D A, B, D, E, K, L, M BTS 75V/D A, B, D, E, J, L, M BTS 75V BF/D C06051 A, E, K BTS 80/F A, D, E, K, L, M BTS 75V/F A, D, E, J, L, M BTS 75V BF/F


129


Series 7000 - Pivot Sets ANSI Type No. Certified Licensee’s Series Designations

C07011 CP1000, CP660

C07021 CP1000, CP660

C07032 CP440, CPA440

C07111 OPL800

C07121 OPH750, OP15500

C07131 OPJ350

C07162 OP440, OPL440, OP15200

C07172 OPJ350

C07202 OPF440, OPLF440, OPF15200

C07311 75240

C07321 75220, 15220

C07371 75233, 15233

C07382 75210

CO7601 75520

C07611 75523


130


CERTIFIED FINISHES Finish Type (ANSI/BHMA Licensee’s Symbol(s) Designations) Aluminum Painted (689) 689/AL

Dark Bronze Painted (690) 690/STAT

Light Bronze Painted (691) 691/DB

Black Painted (693) 693/BLK

Dark Bronze Painted (695) 695/DURO

Gold Painted (696) 696/GL

Bright Brass Plated, Clear Coated (632) 605/US3

Satin Brass Plated, Clear Coated (633) 606/US4

Satin Bronze Plated, Clear Coated (639) 612/US10

Oxidized Satin Bronze Plated Oil Rubbed (640) 613/US10B

Bright Chrome Plated (651) 625/US26

Satin Chrome Plated (652) 626/US26D

Bright Bronze Plated, Clear Coated (637) 611/US9

Bright Nickel Plated, Clear Coated (645) 618/US14

Satin Nickel Plated, Clear Coated (646) 619/US15

Bright Stainless Steel (629) 629/US32

Satin Stainless Steel (630) 630/US32D


131

121 West Railroad Avenue

Princeton, IL. 61356 (815)875-3311

CERTIFIED DOOR CLOSERS A156.4 - 2000

SERIES 2000 – Modern Type with Cover. ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C02011 A, B, C, D, F, H SC60, SC70, SC80 C02051 A, B, C, D, F, H SC60H, SC70H, SC80H C02021 A, B, C, D, F, G, H SC60, SC70, SC80 C02061 A, B, C, D, F, G, H SC60H, SC70H, SC80H C02041 A, B, C, D, F, H SC60, SC70, SC80 C02081 A, B, C, D, F, H SC60H, SC70H, SC80H

SERIES 3000 – Modern Type with No Cover.

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C03011 C03013

A, B, C, D, F, H A, D

SC60 SC90

C03051 C03053

A, B, C, D, F, H A, D

SC60H SC90H

C03021 C03023

A, B, C, D, F, G, H D

SC60 SC90

C03061 C03063

A, B, C, D, F, G, H D

SC60H SC90H

C03041 C03043

A, B, C, D, F, H A, D

SC60 SC90

C03081 C03083

A, B, C, D, F, H A, D

SC60H SC90H

NOTE Products conform to standards (UL 10C) Positive Pressure Fire Tests of Door assemblies and UBC 7-2 (1997). ANSI/BHMA Identifying type number C02191 (Drop bracket for frames or narrow top rail doors) available with; C02011, C02051, C02041, and C02081. ANSI/BHMA Identifying type number C02201 (Drop bracket for PA mounting on narrow top rail doors) available with: C02021 and C02061. (See manufacturer’s catalog). ANSI/BHMA Identifying type number C03191 (Drop bracket for frames or narrow top rail doors) available with; C03011, C03051, C03041, and C03081. ANSI/BHMA Identifying type number C03201 (Drop bracket for PA mounting on narrow top rail doors) available with: C03021 and C03061. (See manufacturer’s catalog). Note: BHMA certified finishes: 689 Aluminum paint, 695 Dark Bronze Paint, and 696 Brass paint available on DOM series 2000 and 3000 closers.


132


Princeton, IL. 61356 (815) 875-3311

CERTIFIED DOOR CLOSERS A156.4 - 2000

SERIES 2000 – Modern Type with Cover. ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C02011 A, B, C, D, F, H SC60, SC70, SC80 C02051 A, B, C, D, F, H SC60H, SC70H, SC80H C02021 A, B, C, D, F, G, H SC60, SC70, SC80 C02061 A, B, C, D, F, G, H SC60H, SC70H, SC80H C02041 A, B, C, D, F, H SC60, SC70, SC80 C02081 A, B, C, D, F, H SC60H, SC70H, SC80H

SERIES 3000 – Modern Type with No Cover.

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C03011 C03013

A, B, C, D, F, H A, D

SC60 SC90

C03051 C03053

A, B, C, D, F, H A, D

SC60H SC90H

C03021 C03023

A, B, C, D, F, G, H D

SC60 SC90

C03061 C03063

A, B, C, D, F, G, H D

SC60H SC90H

C03041 C03043

A, B, C, D, F, H A, D

SC60 SC90

C03081 C03083

A, B, C, D, F, H A, D

SC60H SC90H

NOTE Products conform to standards (UL 10C) Positive Pressure Fire Tests of Door assemblies and UBC 7-2 (1997). ANSI/BHMA Identifying type number C02191 (Drop bracket for frames or narrow top rail doors) available with; C02011, C02051, C02041, and C02081. ANSI/BHMA Identifying type number C02201 (Drop bracket for PA mounting on narrow top rail doors) available with: C02021 and C02061. (See manufacturer’s catalog). ANSI/BHMA Identifying type number C03191 (Drop bracket for frames or narrow top rail doors) available with; C03011, C03051, C03041, and C03081. ANSI/BHMA Identifying type number C03201 (Drop bracket for PA mounting on narrow top rail doors) available with: C03021 and C03061. (See manufacturer’s catalog). Note: BHMA certified finishes: 689 Aluminum paint, 695 Dark Bronze Paint, and 696 Brass paint available on DOM series 2000 and 3000 closers.


133


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.4 - 2000 Certified Door Closers SERIES 2000 – Modern Type with Cover ANSI Type No. PT 4 Options Licensee’s Catalog Designation C02011 A, B, C, D, H 5100, 5200, 5300 A, B, C, D, F, H 5100DLY, 5200DLY, 5300DLY C02021 A, B, C, D, H 5100, 5200, 5300 A, B, C, D, F, H 5100DLY, 5200DLY, 5300DLY C02041 A, B, C, D, H 5100, 5200, 5300 A, B, C, D, F, H 5100DLY, 5200DLY, 5300DLY C02051 A, B, C, D, H 5100HO, 5200HO, 5300HO, A, B, C, D, F, H 5200HODLY, 5300HODLY C02061 A, B, C, D, H 5100HO, 5200HO, 5300HO, A, B, C, D, F, H 5200HODLY, 5300HODLY C02081 A, B, C, D, H 5100HO, 5200HO, 5300HO, A, B, C, D, F, H 5200HODLY, 5300HODLY SERIES 3000 – Modern Type with No Cover C03012 A 5400

A, D 5400BC C03022 5400

D 5400BC C03042 A 5400 A, D 5400BC


134

A BLACK & DECKER COMPANY 19701 Da Vinci, Lake Forest, CA 92610 (949) 672-4000


CERTIFIED DOOR CLOSERS A156.4 2006

SERIES 2000 – Modern Type with Cover

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations

GRADE 1 CO2011 A,B,C,D,E,F,H,J QDC211F, QDC211S ,

A,B,C,D,E,F,G,H,J QDC213F, QDC213S A,B,C,D,E,F,H,J QDC311F A,B,C,D,E,F,G,H,J QDC313F

CO2021 A,B,C,D,E,F,H,J QDC211F, QDC211S


CO2041 A,B,C,D,E,F,H,J QDC211F, QDC211S


CO2051 A,B,C,D,E,F,H,J QDC212F, QDC212S ,







135




SERIES 3000 – Modern Type with No Cover ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations

GRADE 1 CO3011 A,B,C,D,E,F,H,J QDC311

A,B,C,D,E,F,G,H,J QDC313

CO3021 A,B,C,D,E,F,H,J QDC311 A,B,C,D,E,F,G,H,J QDC313

CO3041 A,B,C,D,E,F,H,J QDC311



CO3061 A,B,C,D,E,F,H,J QDC312



C02191* 8Q00103 8Q00104 8Q00105 8Q00106 8Q00107 8Q00108 C02201* 8Q00103 8Q00104 8Q00105 8Q00106 8Q00107 8Q00108 *Bracket for use with appropriate door closer see Manufacture’s Catalog


136




CERTIFIED FINISHES

Licensee’s Finish Type BHMA Code Symbol Aluminum Powder Coat Paint 689 689 Dark Bronze Powder Coat Paint 690 690 Gold Powder Coat Paint 696 696


137


Princeton, Il. 61356 815/875-3311

CERTIFIED DOOR CLOSERS A156.4 – 2000 Series 2000 – Modern Type with Cover

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C02011 A, B, C, D, H

A, B, C, D, F, H A, B, C, D, F, H, J

1070, 4031, and 4040XP 1260, 1460, 4040, and 4010 4510

C02051 A, B, C, D, H A, B, C, D, F, H

1070H, 4031H, and 4040XPH 1260H, 1460H, 4040H, and 4010H

C02091 A, B, C, D, F, H 4010FL C02021 A, B, C, D, H

A, B, C, D, G, H A, B, C, D, F, G, H A, B, C, D, F, G, H, J

1070 4031 and 4040XP 1260, 1460, and 4040 4110 and 4210

C02061 A, B, C, D, H A, B, C, D, G, H A, B, C, D, F, G, H A, B, C, D, F, G, H, J

1070H 4031H and 4040XPH 1260H, 1460H, and 4040H 4110H and 4210H

C02101 A, B, C, D, F, H, J 4110 FL C02031 A, B, C, D, H

A, B, C, D, F, H 4040XP 4010 and 4040

C02071 A, B, C, D, H A, B, C, D, F, H

4040XP 4010H and 4040H

C02111 A, B, C, D, F, H 4010 FL C02041 A, B, C, D, H

A, B, C, D, F, H 1070, 4031 and 4040XP 1260, 1460, 4040, and 4020

C02081 A, B, C, D, H A, B, C, D, F, H

1070H, 4031H, and 4040XPH 1260H, 1460H, 4040H, and 4020H

C02121 A, B, C, D, F, H 4020 FL C02171 D 4010TEL and 4110TEL C02211 A, B, C, D, H

A, B, C, D, H A, B, C, D, H A, B, C, D, H, J

1460T 4040T and 4010T 4031T 4510T

C02221 A, B, C, D, G, H A, B, C, D, H

1460TH, 4040TH , and 4010TH 4031TH


138

Series 2000 – Modern Type with Cover – A156.4 – Continued


A, B, C, D, H A, B, C, D, H A, B, C, D, H, J

1460T 4040T and 4110T 4031T 4210T

C02241 A, B, C, D, G, H A, B, C, D, H

1460TH, 4040TH, and 4110TH 4031TH

C02251 A, B, C, D, H A, B, C, D, H A, B, C, D, H D

1460T 4040T and 4020T 4031T 4000T

C02261 A, B, C, D, G, H A, B, C, D, H

1460TH, 4040TH, and 4020TH 4031TH

C02271 A, B, C, D, H 4031T C02281 A, B, C, D, H 4031TH

Note: Except mechanical non-fusible link hold open, products conform to standards (UL 10C) Positive Pressure Fire Tests of Door Assemblies and UBC 7-2 (1997). ANSI/BHMA Identifying type number C02191 (Drop bracket for frames or narrow top rail doors) available with: C02011, C02051, C02091, C02041, C02081, C02121, C02211, C02221, C02251, C02261. ANSI/BHMA Identifying type number C02201 (Drop bracket for PA mounting on narrow top rail doors) available with: C02021, C02061, C02101, C02231, and C02241. (See manufacturer’s catalog).

Series 3000 Modern Type with No Cover.


A, B, C, D, F, H 1070 1260 and 1371

C03051 A, B, C, D, H A, B, C, D, F, H

1070H 1260H and 1371H

C03021 A, B, C, D, H A, B, C, D, F, H A, B, C, D, F, G, H

1070 1371 1260

C03061 A, B, C, D, H A, B, C, D, F, H A, B, C, D, F, G, H

1070H 1371H 1260H

C03041 A, B, C, D, H A, B, C, D, F, H

1070 1260 and 1371

C03081 A, B, C, D, H A, B, C, D, F, H

1070H 1260H and 1371H


139

Series 3000 – Modern Type with No Cover – A156.4 - Continued

Note: Except mechanical hold open arms, products conform to standards (UL 10C) Positive Pressure Fire Tests of Door Assemblies and UBC 7-2 (1997).

ANSI/BHMA identifying type number C03191 (Drop Bracket for frames or narrow top rail doors) available with: C03011, C03051, C03041, and C03081. ANSI/BHMA identifying type number C03201 (Drop Bracket for PA mounting on narrow top rail doors) available with: C03021 and C03061. (See Manufacturers Catalog).

Series 4000 – Concealed in Door ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C04011 A, D 3030 and 3030H C04021 A, D 330 and 330H C04031 D

3130 and 3130H (Single lever arm & track)

Series 5000 – Overhead (Double lever arm) Concealed ANSI Type No. Certified PT 8 Options Certified Licensee’s Series Designations C05011 A, B, D, E, F, J, L

A, B, D, E, F, L 5010 5030

C05021 A, B, D, F, J, L A, B, D, F, L

5010 5030

C05091 A, B, D, E, F, J, L A, B, D, E, F, L

5010 5030

Note: UL 10C not available when mounted with center pivots or with PT 8 Option B. ANSI/BHMA Identifying type numbers C05011 and C05021 also apply to 5010 and 5030 series with optional (100° Hold-open arm), and (180° Hold-open arm). (See manufacturer’s catalog).

Series 5000 – Overhead (Slide Track) Concealed ANSI Type No. Certified PT 8 Options Certified Licensee’s Series Designations C05031 A, B, E, F, L

A, B, E, F, L A, D, E, F, L

2010 2030 2210 and 2210 DPS

C05041 A, B, F, L A, B, F, L A, F, L, D

2010 2030 2210 and 2210 DPS

C05071 A, B, F, L A, B, F, L

2010 2030

C05081 A, B, F, L 6030 Note: UL 10C not available when mounted with center pivots or with PT 8 Option B. Note: Except mechanical hold open, products conform to standards (UL 10C) Positive Pressure Fire Tests of Door Assemblies and UBC 7-2 (1997). ANSI/BHMA identifying type numbers C05031 and C05041, C05051, and C05061 also apply to 2010, 2030, and 6030 series with optional (Hold-open track). (See manufacturer’s catalog).


140

A156.4 - Continued

Note: BHMA finishes: 689, 695, 691, 690, 692, 696, 693, 651*, 652*, 632*, 633*, 637*, 639*, 646* available on LCN Models 2000, 3000, 4000, and 5000. See LCN Certified Finishes page for description. Note: * denotes these finishes not available on the series 2000 LCN 1070 Closers and series 3000 LCN 1070 and 1370 Closers.


141

NORTON DOOR CONTROLS

1902 AIRPORT ROAD MONROE, NC 28110

(704) 283-2101

CERTIFIED DOOR CLOSERS ANSI/BHMA A156.4 - 2000

Series 1000-Surface Closers-Traditional ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C01013 A, B, C, D, H 78 B/F A, B, C, F, H 78 B/F-DA C01023 A, B, C, D, H 78 B/F-PA, 78 B/F-PRA A, B, C, D, G, H UNI-78B/F C01033 A, B, C, D, H 78 B/F C01053 A, B, C, D, H 78B/F-H C01063 A, B, C, D, H 78 B/F-PA-H, 78B/F-PRH A, B, C, D, G, H UNI-78B/F-H C01073 A, B, C, D, H 78 B/F-H C01163 A, B, C, F, H 78 B/F-DA Series 2000-Modern Type with Cover ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C02011 A, D 1600BC-P A, F 1600DA-P A, B, C, D, H 1601(BF)-P A, B, C, F, H 1601(BF)-DA-P A, B, C, D, F, H, J 7500 A, B, C, D, F, H, J R7500, 7570 A, B, C, D, F, J 7700 A, B, C, D, F, J R7700, 7770 A, B, C, D, F 8300, 8500 A, B, C, D, F R8300, R8500 A, B, C, D, F, H 8301, 8501 A, B, C, D, F, H R8301, R8501 C02012 A, D 1700COV C02021 D (P)1600BC-P, PR1600BC-P F (P)1600DA-P, PR1600DA-P D, G CLP-1600BC-P, CPS1600BC-P UNI-1600BC-P A, B, C, D, H (P)1601(BF)-P, PR1601(BF)-P A, B, C, F, H (P)1601(BF)DA-P, PR1601(BF)DA-P A, B, C, D, G, H CLP-1601-P, CPS-1601-P, UNI-1601-P


142

A, B, C, F, G, H CLP-1601DA-P, CPS-1601DA-P

UNI-1601DA-P A, B, C, D, F, H, J (P)7500, PR7500, PR7570 A, B, C, D, F, G, H, J CLP-7500, CPS-7500, UNI-7500, CLP-7570, CPS-7570 A, B, C, D, F, J P7700, PR7700, PR7770 A, B, C, D, F, G, J CLP-7700, CPS-7700, UNI-7700 CLP-7770, CPS7770 A, B, C, D, F P8300, PR8300, P8500, PR8500 A, B, C, D, F, G CLP-8300, CPS-8300, UNI-8300, CLP-8500, CPS-8500, UNI-8500 A, B, C, D, F, H (P)8301, PR8301, (P)8501, PR8501 A, B, C, D, F, G, H CLP-8301, CPS-8301, UNI-8301, CLP-8501, CLP-8501, UNI-8501 C02022 D (P)1700COV C02031 A, B, C, D, F, H, J 7500 x 7797/7798 A, B, C, D, F, J 7700 x 7797/7798 CO2041 A, D 1600BC-P, J1600BC-P A, F 1600DA-P, J1600BC-P D, G UNI-J1600BC-P F, G UNI-J1600DA-P A, B, C, D, H 1601-P, J1601-P A, B, C, F, H 1601DA-P, J1601DA-P A, B, C, D, G, H UNI-J1601-P A, B, C, F, G, H UNI-1601DA-P A, B, C, D, F, H, J 7500, J7500, JL7500 A, B, C, D, F, G, H, J UNI-J7500 A, B, C, D, F, J 7700, J7700, JL7700, J7730 A, B, C, D, F, G, J UNI-J7700 A, B, C, D, F 8300, J8300, 8500, J8500 A, B, C, D, F, G UNI-J8500, UNI-J8300, A, B, C, D, F, H 8301, J8301, 8501, J8501 A, B, C, D, F, G, H UNI-J8501, UNI-J8301, C02042 A, D 1700COV, J1700COV C02051 D 1600BC-H-P F 1600DA-H-P A, B, C, D, F, H, J 7500H A, B, C, D, F, J 7700H A, B, C, D, F 8300H, 8500H A, B, C, D, F, H 8301H, 8501H C02052 D 1700HCOV


143

C02061 D (P)1600BC-H-P, PR1600BC-H-P F (P)1600DA-H-P, PR1600DA-H-P

D, G, CLP-1600BC-T-P, CPS-1600BC-T-P, UNI-1600BC-H-P F, G CLP-1600DA-T-P, CLP-1600DA-T-P, UNI-1600DA-H-P A, B, C, D, H (P)1601-H-P, PR1601-H-P, A, B, C, F, H (P)1601DA-H-P, PR1601DA-H-P A, B, C, D, G, H CLP-1601T-P, CPS-1601T-P, UNI-1601H-P A, B, C, F, G, H CLP-1601DA-T-P, CPS-1601DA-T-P, UNI-1601DA-H-P A, B, C, D, F, H, J (P)7500H, PR7500H A, B, C, D, F, G, H, J CLP-7500T, CPS7500T, UNI-7500H, CLP-7570T, CPS-7570T A, B, C, D, F, J P7700H, PR7700H A, B, C, D, F, G, J CLP-7700T, CPS-7700T, UNI-7700H, CLP-7770T, CPS7770T A, B, C, D, F P8300H, PR8300H, P8500H, PR8500H A, B, C, D, F, G CLP-8300T, CPS-8300T, UNI-8300H, CLP-8500T, CPS-8500-T, UNI-8500H A, B, C, D, F, H (P)8301H,(R)8301H, (P)8501H, PR8501H A, B, C, D, F, G, H CLP-8301T, CPS-8301T, UNI-8301H CLP-8501T, CPS-8501T, UNI-8501H C02062 D (P)1700H-COV C02071 A, B, C, D, F, H, J 7500H x 7797/7798 A, B, C, D, F, J 7700H x 7797/7798 C02081 D 1600BC-H-P, J1600BC-H-P F 1600DA-H-P, J1600DA-H-P D, G UNI-J1600BC-H-P F, G UNI-J1600DA-H-P A, B, C, D, H 1601-H-P, J1601-H-P A, B, C, F, H 1601DA-H-P, J1601DA-H-P A, B, C, D, F, H, J 7500H, J7500H, JL7500H A, B, C, D, F, G, H, J UNI-J7500H

A, B, C, D, F, J 7700H, J7700H, JL7700H, J7730H A, B, C, D, F, G, J UNI-J7700H A, B, C, D, F 8300H, J8300H, 8500H, J8500H A, B, C, D, F, G, H UNI-J8500, UNI-J8300H, A, B, C, D, F, H 8301H, J8301H, 8501H, J8501H A, B, C, D, F, G, H UNI-J8301H, UNI-J8501H C02082 D 1700HCOV, J1700HCOV


144

C02211 A, B, C, D, F, G, H, J 7500ST, 7540ST A, B, C, D, F, G, J 7700ST, 7740ST A, B, C, D, F, G 8300ST, 8340ST, 8500ST, 8540ST A, B, C, D, F, G, H 8301ST, 8341ST, 8501ST, 8541ST C02221 A, B, C, D, F, G, H, J 7500STH, 7540STH A, B, C, D, F, G, J 7700STH, 7740STH A, B, C, D, F, G 8300STH, 8340STH, 8500STH, 8540STH A, B, C, D, F, G, H 8301STH, 8341STH, 8501STH, 8541STH C02231 A, B, C, D, F, G, H, J PS7500ST, PS7540ST A, B, C, D, F, G, J PS7700ST, PS7740ST A, B, C, D, F, G PS8300ST, PS8340ST, PS8500ST, PS8540ST A, B, C, D, F, G, H PS8301ST, PS8341ST, PS8501ST, PS8541ST C02241 A, B, C, D, F, G, H, J PS7500STH, PS7540STH A, B, C, D, F, G, J PS7700STH, PS7740STH A, B, C, D, F, G PS8300STH, PS8340STH, PS8500ST, PS8540STH A, B, C, D, F, G, H PS8301STH, PS8341STH, PS8501ST, PS8541STH C02251 A, B, C, D, F, G, H, J J7500ST A, B, C, D, F, G, J J7700ST C02251 A, B, C, D, F, G J8300ST, J8500ST A, B, C, D, F, G, H J8301ST, J8501ST C02261 A, B, C, D, F, G, H, J J7500STH A, B, C, D, F, G, J J7700STH A, B, C, D, F, G J8300STH, J8500STH A, B, C, D, F, G, H J8301STH, J8501STH C02271 A, B, C, D, F, G, H, J J7500 A, B, C, D, F, G, J J7700ST A, B, C, D, F, G J8300ST, J8500ST A, B, C, D, F, G, H J8301ST, J8501ST C02281 A, B, C, D, F, G, H, J J7500STH A, B, C, D, F, G, J J7700STH A, B, C, D, F, G J8300STH, J8500STH A, B, C, D, F, G, H J8301STH, J8501STH


145

Series 3000-Modern Type No Cover ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C03011 A, D 1600BC A, F 1600DA A, B, C, D, H 1601 A, B, C, F, H 1601DA A, B, C, D, F 8100 A, B, C, D, F, H 8101 C03012 A, D 1700 C03013 A, D 9300 C03021` D (P)1600BC, P1600BC, PR1600BC F (P)1600DA, P1600DA, PR1600DA D, G CLP-1600BC, CPS-1600BC, UNI-1600BC F, G CLP-1600DA, CPS-1600DA, UNI-1600DA A, B, C, D, H (P)1601, P1601, PR1601 A, B, C, F, H (P)1601DA, P1601DA, PR1601DA A, B, C, D, G, H CLP-1601, CPS-1601, UNI-1601 A, B, C, F, G, H CLP-1601DA, CPS-1601DA, UNI-1601DA A, B, C, D, F P8100, PR8100 A, B, C, D, F, G CLP-8100, CPS-8100, UNI-8100 A, B, C, D, F, H (P) 8101, P8101, PR8101, A, B, C, D, F, G, H CLP-8101, CPS8101, UNI-8101 C03022 D (P)1700 C03023 D P9300 C03031 D 1600BC x 1647 F 1600DA x 1647 A, B, C, D, H 1601 x 1647 A, B, C, F, H 1601DA x 1647


146

C03041 A, D 1600BC, J1600BC A, F 1600DA, J1600DA D, G UNI-J1600BC F, G UNI-J1600DA A, B, C, D, H 1601, J1601 A, B, C, F, H 1601DA, J1601DA A, B, C, D, G, H UNI-J1601 A, B, C, F, G, H UNI-1601DA A, B, C, D, F 8100, J8100 A, B, C, D, F, G UNI-J8100 A, B, C, D, F, H 8101, J8101 A, B, C, D, F, G, H UNI-J8101 C03042 A, D 1700, J1700 C03051 D 1600BC-H F 1600DA-H A, B, C, D, H 1601H A, B, C, F, H 1601DA-H A, B, C, D, F 8100H A, B, C, D, F, H 8101H C03052 D 1700H C03053 D 9300H C03061 D (P)1600BC-H, P1600BC-H, PR1600BC-H F (P)1600DA-H, P1600DA-H, PR1600DA-H D, G CLP-1600BC-T, CPS-1600BC-T, UNI-1600BC-H F, G CLP-1600DA-T, CPS1600DA-T, UNI-1600BC-H A, B, C, D, H (P)1601H, P1601H, PR1601H A, B, C, F, H (P)1601DA-H, P1601DA-H, PR1601DA-H A, B, C, D, G, H CLP-1601T, CPS-1601T, UNI-1601T A, B, C, F, G, H CLP-1601DA-T, CPS-1601DA, UNI-1601DA A, B, C, D, F P8100H, PR8100H A, B, C, D, F, G, H CLP-8100T, CPS-8100T, UNI-8100H A, B, C, D, F, H (P)8101H, P8101H, PR8101H A, B, C, D, F, G, H CLP-8101T, CPS8101T, UNI8101H C03062 D 1700H C03063 D P9300H


147

C03071 D 1600BC-H x 1647 F 1600DA-H x 1647 C03081 D 1600BC-H, J1600BC-H F 1600DA-H, J1600DA-H D, G UNI-J1600BC-H F, G UNI-J1600DA-H A, B, C, D, H 1601H, J1601H A, B, C, F, H 1601DA-H, J1601DA-H A, B, C, D, G, H UNI-J1601H A, B, C, F, G, H UNI-J1601DA-H A, B, C, D, F 8100H, J8100H A, B, C, D, G, F UNI-J8100H A, B, C, D, F, H 8101H, J8101H, A, B, C, D, F, G, H UNI-J8101H C03082 D 1700H, J1700H C03083 D 9300H Series 5000-Overhead Concealed Closers ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C05031 A, B, C, D, E, F, G, J 7900, 7970, 7970DPS C05041 A, B, C, D, E, F, G, J 7900, 7970, 7970DPS C05051 A, B, C, D, E, F, G, J 7900, 7970, 7970DPS CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol Designation Primed for Painting 600 Bright Brass 605E Satin Brass 606E Bright Bronze 611E Satin Bronze 612E Oxidized Oil Rubbed Bronze 613E Bright Chrome 625E Dull Chrome 626E Aluminum Painted 689 Dark Statuary Bronze Painted 690 Dull Bronze Painted 691 Black Painted 693 Gold Painted 696


148

PDQ Manufacturing PO Box 507

2754 Creek Hill Road Leola, PA 17540 1-800-441-9692

www.pdqlocks.com

CERTIFIED DOOR CLOSERS A156.4-2006

Series 2000 – Modern Type With Cover

ANSI Type No. PT 4 Options Licensee’s Catalog Designations C02011 A,B,C,D,E,F,G,H,I 1100, 3100, 5300, 5500 C02021 A,B,C,D,E,F,G,H,I 1100, 3100, 5300, 5500 C02041 A,B,C,D,E,F,G,H,I 1100, 3100, 5300, 5500

Series 3000 – Modern Type No Cover

ANSI Type No. PT 4 Options Licensee’s Catalog Designations C03011 A,B,C,D,E,F,G,H,I 1100, 3100, 5300, 5500 C03021 A,B,C,D,E,F,G,H,I 1100, 3100, 5300, 5500 C03041 A,B,C,D,E,F,G,H,I 1100, 3100, 5300, 5500


149

RIXSON SPECIALTY DOOR CONTROLS

1902 Airport Road Monroe, NC 28110

(704) 283-2101

CERTIFIED DOOR CLOSERS ANSI/BHMA A156.4 – 2000

Series 2000-Modern Type with Cover

ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified

C06021 A, B, C, F, G, J 28, G28, W28, 328 A, B, E, J G5000 SIZE, 5000 SIZE, W5000 SIZE C06031 A, F, G 327 A, E, F, J 5300 SIZE A, E, F, J 5310 SIZE C06041 A, B, C, F, G, J 27, 27 x 1-1/2, Q27, 127 A, B, E, J 5100 SIZE, 5100 x 1-1/2 SIZE, Q5100 SIZE C06051 A, F, G, J F27, F27 x 1-1/2, FQ27 A, B, E, F, J F5100 SIZE, F5100 x 1-1/2 SIZE, FQ5100 SIZE C06061 A, B, C, F, G, J H28 C06071 A, B, C, F, G, J L27


150

Series 7000-Pivots and Pivot Sets

ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C07011 Center Pivot Set H117-3/4

C07021 Center Pivot Set 117-3/4

C07032 Center Pivot Set 128-3/4, 370

C07042 Center Pivot Set 127-3/4

C07111 Offset Pivot Set L117

C07121 Offset Pivot Set 117-1/2, 117-1/2 x 1-1/2

C07131 Offset Pivot Set 195

C07141 Offset Pivot Set 117-1/2 x A180

C07151 Offset Pivot Set 195 x A180

C07162 Offset Pivot Set 117, 147, H147, L147, 117 x 1-1/2, 147 x 1-1/2

C07172 Offset Pivot Set 117-1/4

C07182 Offset Pivot Set 17 x A180, 147 x A180, H147 x A180, L147 x A180

C07192 Offset Pivot Set 195 x A180

C07202 Offset Pivot Set F147, F117, FL147, F117x1-1/2, F147 x 1-1/2

C07311 Offset Intermediate Set ML19

C07321 Offset Intermediate Set M19, M190, M19 x 1-1/2

C07331 Offset Intermediate Set 219



C07361 Offset Intermediate Set A19

C07371 Offset Intermediate Set FM19, FM190, FML190


C07501 Offset Top Pivot 280



C07601 Pocket Pivot 519

C07611 Pocket Pivot F519


151

Series 9000-Gate or Dwarf Door Closers

ANSI Type No. Licensee’s Series Designations Certified C09503 354, 355, 356, 357, 359

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designations) Licensee’s Symbol Primed for Painting 600 Bright Brass 605 Satin Brass 606 Bright Bronze 611 Satin Bronze 612 Oxidized Oil Rubbed Bronze 613 Bright Chromium Plated 625 Satin Chromium Plated 626 Aluminum Painted 689 Dark Bronze Painted 690 Light Bronze Painted 691 Black Painted 693 Satin Brass Painted 696


152

SAEHAN HARDWARE 5TH, #502, OFFICE BUILDING, ILSAN TECHNO TOWN 1141-1,

BAEGSOK-DONG, ILSAN-GU, KOYANG SHI, KYONGGI-DO, 411-722 KOREA 82/31-9041967

CERTIFIED DOOR CLOSERS

ANSI/BHMA A156.4 2002

SERIES 2000 – Modern Type with Cover ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designation C02011 D 7000(6000) Series C02021 D 7000(6000) Series C02031 D 7000(6000) Series C02041 D 7000(6000) Series C02191 D 7000(6000) Series

SERIES 3000 – Modern Type with No Cover ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designation C03011 D 7000(6000) Series C03021 D 7000(6000) Series C03031 D 7000(6000) Series C03191 D 7000(6000) Series C03011 D 7000(6000) Series


153

SAMHWA PRECISION CO., LTD.

2-NA-601, 1262 JEONGWANG DONG, SIHEUNG SHI, KYUNGGI DO, KOREA

TEL: 82-31-497-8822~7 • FAX: 82-31-497-8828~9

www.kingdoorcloser.com


SERIES 2000 – MODERN TYPE WITH COVER ANSI Type No. PT 4 Options Licensee's Catalog Designation GRADE 1 C02011 A,B,C,D,E,F,G,H,J K-200, K-990, NSK-990, K-300, K-600 K-700, K-800, NSK-600, NSK-800 C02021 A,B,C,D,E,F,G,H,J K-200, K-990, NSK-990, K-300, K-600 K-700, K-800, NSK-600, NSK-800 C02041 A,B,C,D,E,F,G,H,J K-200, K-990, NSK-990, K-300, K-600 K-700, K-800, NSK-600, NSK-800 C02051 A,B,C,D,E,F,G,H,J K-200H, K-990H, NSK-990H, K-300H, K-600H K-700H, K-800H, NSK-600H, NSK-800H C02061 A,B,C,D,E,F,G,H,J K-200H, K-990H, NSK-990H, K-300H, K-600H K-700H, K-800H, NSK-600H, NSK-800H C02081 A,B,C,D,E,F,G,H,J K-200H, K-990H, NSK-990H, K-300H, K-600H K-700H, K-800H, NSK-600H, NSK-800H C02211 A,B,C,D,E,F,G,H,J K-200T, K-990T, NSK-990T, K-300T, K-600T K-700T, K-800T, NSK-600T, NSK-800T C02221 A,B,C,D,E,F,G,H,J K-200TH, K-990TH, NSK-990TH, K-300TH, K-600TH K-700TH, K-800T, NSK-600TH, NSK-800TH


154

SAMHWA PRECISION CO., LTD.

2-NA-601, 1262 JEONGWANG DONG, SIHEUNG SHI, KYUNGGI DO, KOREA

TEL: 82-31-497-8822~7 • FAX: 82-31-497-8828~9

www.kingdoorcloser.com


SERIES 3000 – MODERN TYPE WITH NO COVER ANSI Type No. PT 4 Options Licensee's Catalog Designation GRADE 1 C03011 A,B,C,D,E,F,G,H,J K-200, K-990, NSK-990, K-300, K-600 K-700, K-800, NSK-600, NSK-800 C03021 A,B,C,D,E,F,G,H,J K-200, K-990, NSK-990, K-300, K-600 K-700, K-800, NSK-600, NSK-800 C03041 A,B,C,D,E,F,G,H,J K-200, K-990, NSK-990, K-300, K-600 K-700, K-800, NSK-600, NSK-800 C03051 A,B,C,D,E,F,G,H,J K-200H, K-990H, NSK-990H, K-300H, K-600H K-700H, K-800H, NSK-600H, NSK-800H C03061 A,B,C,D,E,F,G,H,J K-200H, K-990H, NSK-990H, K-300H, K-600H K-700H, K-800H, NSK-600H, NSK-800H C03081 A,B,C,D,E,F,G,H,J K-200H, K-990H, NSK-990H, K-300H, K-600H K-700H, K-800H, NSK-600H, NSK-800H C03211 A,B,C,D,E,F,G,H,J K-200T, K-990T, NSK-990T, K-300T, K-600T K-700T, K-800T, NSK-600T, NSK-800T C03221 A,B,C,D,E,F,G,H,J K-200TH, K-990TH, NSK-990TH, K-300TH, K-600TH K-700TH, K-800T, NSK-600TH, NSK-800TH


155

SAMUEL HEATH & SONS PLC 111 East 39th Street – Suite 2R

New York, NY 10016 212 599 5177

email: [email protected]

www.samuel-heath.com

CERTIFIED DOOR CLOSER R102 PERKO POWER

ANSI/BHMA A156.4-2000

PT3 CONCEALED IN DOOR LEAF


156

SARGENT MANUFACTURING COMPANY


203/562-2151

CERTIFIED DOOR CLOSERS A156.4-2000

Series 2000-Modern Type with Cover

ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C02011 A, B, C, D, F, H 281-O, 351-O, 1430-O, 1431-O, 1430-RO,

1431-RO, 281-O10 A, B, C, D, H 1331-JO, 1130C-RU, 1131C-RU A, B, D, H 1132C-RU, 1133C-RU, 1134C-RU, 1135C-RU C02021 A, B, C, D, F, G, H 351-PS, 351-CPS, 1430-PS, 1431-PS, 1430-CPS,

1431-CPS A, B, C, D, G, H 281-PS, 281-CPS A, B, C, D, F, H 351-P9, 351-P10, 1430-P9, 1431-P9, 1430-RP9, 1431-RP9, 1430-P10, 1431-P10, 281-PD10 A, B, C, D, H 281-P9, 281-P10, 281-SP10, 1331-JP9, 1130C-RU,

1131C-RU A, B, D, H 1132C-RU, 1133C-RU, 1134C-RU, 1135C-RU C02031 A, B, C, D, F, H 1430-O, 1431-0, 1430-RO, 1431-R0, 281-O C02041 A, B, C, D, F, H 281-O, 351-O, 1430-O, 1431-O, 1430-RO,

1431-RO A, B, C, D, H 1331-JO, 1130C-RU, 1131C-RU A, B, D, H 1132C-RU, 1133C-RU, 1134C-RU, 1135C-RU C02051 A, B, C, D, F, H 351-H, 1430-H, 281-H, 281-H10 A, B, C, D, H 1331-JH, 1130C-HU, 1131C-HU A, B, D, H 1132C-HU, 1133C-HU, 1134C-HU, 1135C-HU C02061 A, B, C, D, F, G, H 1430-PSH, 1430-CPSH, 351-PSH, 351-CPSH, A, B, C, D, G, H 281-CPSH, 281-PSH A, B, C, D, F, H 281-PH9, 351-PH9, 1430-PH9, 1431-PH9 A, B, C, D, H 1331-JPH, 1130C-HU, 1131C-HU A, B, D, H 1132C-HU, 1133C-HU, 1134C-HU, 1135C-HU C02071 A, B, C, D, F, H 1430-H, 281-H C02081 A, B, C, D, F, H 351-H, 1430-H, 1431-H A, B, C, D, F, H 281-H A, B, C, D, H 1331-JH, 1130C-HU, 1131C-HU A, B, D, H 1132C-HU, 1133C-HU, 1134C-HU, 1135C-HU C02091 A, B, C, D, F, H 281-F, 351-F, 1430-F, 1431-F,


157

SARGENT MANUFACTURING COMPANY 156.4-2000 Continued

C02101 A, B, C, D, F, H 351-PF9, 1430-PF9, 1431-PF9 A, B, C, D, H 281-PF9 C02111 A, B, C, D, F, H 1430-F, 281-F C02121 A, B, C, D, F, H 351-F, 1430-F, 1431-F, 281-F C02211 A, B, C, D, F, G, H 281-OTB, 281-ODB, 351-OTB, 351-ODB,

1430-OTB, 1430-ODB, A, B, C, D, G, H 421-CTB A, B, C, D, F, H 281-OT, 281-OD, 281-SSPT, 351-OT, 351-OD,

1430-OT, 1430-OD, C02221 A, B, C, D, F, H 281-HT, 281-HD, 351-HT, 351-HD, 1430-HT,

1430-HD A, B, C, D, F, G, H 281-HTB, 281-HDB, 351-HTB, 351-HDB,

1430-HTB, 1430-HDB A, B, C, D, G, H 421-CTHB C02231 A, B, C, D, F, H 281-POT, 281-PSSPT, 351-POT, 1430-POT A, B, C, D, F, G, H 281-POTB, 351-POTB, 1430-POTB 1 A, B, C, G, H 421-PCTB C02241 A, B, C, D, F, H 281-PHT, 351-PHT, 1430-PHT A, B, C, D, F, G, H 281-PHTB, 351-PHTB, 1430-PHTB A, B, C, G, H

Modern Type No Cover

C03011 A, B, C, D, H 1130-RU, 1131-RU A, B, D, H 1132-RU, 1133-RU, 1134-RU, 1135-RU C03021 A, B, C, D, H 1130-RU, 1131-RU A, B, D, H 1132-RU, 1133-RU, 1134-RU, 1135-RU C03041 A, B, C, D, H 1130-RU, 1131-RU A, B, D, H 1132-RU, 1133-RU, 1134-RU, 1135-RU C03051 A, B, C, D, H 1130-HU, 1131-HU A, B, D, H 1132-HU, 1133-HU, 1134-HU, 1135-HU C03061 A, B, C, D, H 1130-HU, 1131-HU A, B, D, H 1132-HU, 1133-HU, 1134-HU, 1135-HU C03081 A, B, C, D, H 1130-HU, 1131-HU A, B, D, H 1132-HU, 1133-HU, 1134-HU, 1135-HU

NOTE: Refer to catalog for specific sizing requirements.


158

SARGENT MANUFACTURING COMPANY 156.4-2000 Continued

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designation) Licensee’s Symbol Aluminum Paint (689) EN Dark Bronze Paint (690) EB Light Bronze Painted (691) EP Black Painted (693) ED Brass Painted (696) EAB Bright Brass Plated, Clear Coated (605) (632) US 3 Satin Brass Plated, Clear Coated (633) (606) US 4 Satin Bronze Plated, Clear Coated (639) (612) US 10 Oxidized Satin Bronze Plated Oil Rubbed (640) (613) US 10B Bright Chrome Plated (651) (625) US 26 Satin Chrome Plated (652) (626) US 26D Bright Bronze Plated, Clear Coated (637) (611) US 9


159

Stanley Door Closers 6161 East 75th Street

Indianapolis, IN 46250 Phone 317.849.2250

Fax 317.806.3528 www.stanleydoorclosers.com

Certified Door Closers A156.4 – 2000

Series 2000 Modern Type with Cover

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C02011 A, B, C, D, H D-1650 A, B, C, D, F, H D-4550, D-3550 C02051 A, B, C, D, H D-1650H A, B, C, D, F, H D-3550H, D-4550H C02021 A, B, C, D, H D-1650 A, B, C, D, F, G, H D-3550, D-4550 A, B, C, D, F, G, H, J D-4550 C02061 A, B, C, D, H D-1650H A, B, C, D, F, G, H D-3550H, D-4550H A, B, C, D, F, G, H, J D-4550H C02031 A, B, C, D, F, H D-4550 C02071 A, B, C, D, F, H D-4550H C02041 A, B, C, D, H D-1650 A, B, C, D, F, H D-3550, D-4550 C02081 A, B, C, D, H D-1650H A, B, C, D, F, H D-3550H, D-4550H C02211 A, B, C, D, H D-3550 A, B, C, D, H D-4550T C02221 A, B, C, D, G, H D-3551TH, D-4551TH C02231 A, B, C, D, H D-3550T A, B, C, D, H D-4550T C02241 A, B, C, D, G, H D-3551TH, D-4551TH C02251 A, B, C, D, H D-3550T A, B, C, D, H D-4550T C02261 A, B, C, D, G, H D-3551TH, D-4551TH


160

Series 3000 Modern Type with Cover

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C03011 A, B, C, D, H D-1650 C03051 A, B, C, D, H D-1650H C03021 A, B, C, D, H D-1650 C03061 A, B, C, D, H D-1650H C03041 A, B, C, D, H D-1650 C03081 A, B, C, D, H D-1650H Note: BHMA finishes 689, 690, 691, 693, 695, 696 See Stanley Door Closer Catalog for finish description


161

YALE SECURITY, INC. 1902 Airport Road Monroe, NC 28110

(704) 283-2101

CERTIFIED DOOR CLOSERS ANSI/BHMA A156.4 – 2000

Series 1000-Surface Closers-Traditional

ANSI Type No. PT 4 Options Licensee’s Series Designations

Certified Certified C01013 A, B, C, D, H 1900 A, B, C, F, H 1900DL C01023 A, B, C, D, H PA1900, PR1900 A, B, C, D, G, H UNI-1900 C01033 A, B, C, D, H 1900 C01053 A, B, C, D, H 1910 C01063 A, B, C, D, H PA1910, PR1910 A, B, C, D, G, H UNI-1910 C01073 A, B, C, D, H 1910 C01163 A, B, C, F, H 1900DL Series 2000-Modern Type with Cover ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C02011 A, B, C, D, F 3300, 3500 A, D 50BC-P A, B, C, D, F, J 400 A, B, C, D, F, H 3301, 3501, 51-P A, B, C, D, F, H, J 4400 A, B, C, D, F, J SCR400 A, B, C, D, F, H, J SCR4400 C02012 A, D 5100P C02021 A, B, C, D, F PA3000, PA3500, PR3300, PR3500 D, F (PA)50BC-P, PR50BC-P A, B, C, D, F, J PA400, PR400 A, B, C, D, F, H (PA)3301, (PA)3501, PR3301, PR3501 A, B, C, D, H (PA)51-P, PR51-P A, B, C, F, H (PA)51DL-P, PR51DL-P A, B, C, D, F, H, J (PA)4400, PR4400 A, B, C, D, F, G 3320,3520,UNI-3300, UNI-3500, 3330, 3530 D, G UNI-50-P, 5120-P, 5130-P


162

F, G UNI-50DL-P, 5120DL-P, 5130DL-P A, B, C, D, F, G, J UNI-400, 4020, 4030 A, B, C, D, F, G, H 3321, 3521, 3331, 3531, UNI-3301, UNI-3501, A, B, C, D, H 5121-P, 5131-P, UNI-51-P A, B, C, F, H 5121DL-P, 5131DL-P, UNI-51DL-P A, B, C, D, F, G, H, J UNI-4400, 4420, 4430 A, B, C, D, F SAP3300, SAP3500 A, B, C, D, F, J SAP400, SCP400 A, B, C, D, F, H SAP3301, SAP3501 A, B, C, D, F, H, J SAP4400, SCP4400 A, B, C, D, F, G SAP3320, SAP3520, SAP3330, SAP3530 A, B, C, D, F, G, J SAP4020, SCP4020, SAP4030, SCP4030 A, B, C, D, F, G, H SAP3321, SAP3521, SAP3331, SAP3531 A, B, C, D, F, G, H, J SAP4420, SCP4420, SAP4430, SCP4430 C02022 D 5100P, PA5100P C02031 A, B, C, D, F, J 400 A, B, C, D, F, H, J 4400 C02041 A, B, C, D, F 3300, TJ3300, 3500, TJ3500 A, B, C, D, F, G UNI-J3300, UNI-J3500 D 50BC-P, TJ50BC-P F 50DL-P, TJ50DL-P D, F, G UNI-J50BC-P A, B, C, D, F, J 400, TJ400, TJL400, A, B, C, D, F, G, J UNI-J400 A, B, C, D, F, G, H, J UNI-J4400 A, B, C, D, F, H 3301, TJ3301, 3501, TJ3501 A, B, C, D, H 51-P, TJ51-P A, B, C, F, H 51DL-P, TJ51DL-P A, B, C, D, F, G, H UNI-J3301, UNI-J3501, UNI-J51-P A, B, C, D, F, H, J 4400, TJ4400, TJL4400, C02051 A, B, C, D, F 3310, 3510 D 150BC-P F 150DL-P A, B, C, D, F, J 1400 A, B, C, D, F, H 3311, 3511, 151-P A, B, C, D, F, H, J 4410 C02052 D 5110P


163

C02061 A, B, C, D, F PA3310, PA3510, PR3310, PR3510 D (PA)150BC-P, PR150BC-P F (PA)150DL-P, PR150DL-P A, B, C, D, F, J PA1400, PR1400 A, B, C, D, F, H (PA)3311, (PA)3511, (PA)51BC-P, PR3310, PR3510, PR151-P A, B, C, D, H (PA)151-P, PR151-P A, B, C, F, H (PA)151DL-P, PR151DL-P A, B, C, D, F, H, J (PA) 4410, PR1410 A, B, C, D, F, G 3320T, 3520T, UNI-3310, UNI-3510, UNI-1400, 3330T, 3530T D, G UNI-150BC-P F, G UNI-150DL-P A, B, C, D, F, G, J UNI-1400, 4020T, 4030T A, B, C, D, F, G, H 3321T, 3321T, 3521T, 3531T, UNI-3311, UNI-3511, UNI-4410 A, B, C, D, G, H 5121T-P, 5131T-P, UNI-151-P A, B, C, F, G, H 5121DL-T-P, 5131DL-T-P, UNI-151DL-P A, B, C, D, F, G, H, J UNI-4410, 4020T, 4030T A, B, C, D, F, G, J SCP4020T, SCP4030T A, B, C, D, F, G, H, J SCP4420T, SCP4420T C02062 D 5110P, PA5110P C02071 A, B, C, D, F, J 1400 A, B, C, D, F, H, J 4410 C02081 A, B, C, D, F 3310, TJ3310, 3510, TJ3510 D 150BC-P, TJ150BC-P F 150DL-P, TJ150DL-P A, B, C, D, F, G UNI-J3310, UNI-J3510 D, G UNI-J150BC-P F, G UNI-J150DL-P A, B, C, D, F, J 1400, TJ1400, TJL1400 A, B, C, D, F, G, J UNI-J1400 A, B, C, D, F, H 3311, TJ3311, 3511, TJ3511 A, B, C, D, G, H 151BC-P, TJ151BC-P A, B, C, F, G, H 151DL-P, TJ151DL-P A, B, C, D, F, G, H UNI-J3311, UNI-J3511 A, B. C, D, G, H UNI-J151BC-P A, B, C, F, G, H UNI-J151DL-P A, B, C, D, F, H, J 4410, TJ4410, TJL4410 A, B, C, D, F, G, H, J UNI-J4410 C02082 D 5110P, TJ5110P


164

C02211 A, B, C, D, F, G 3300ST, 3500ST, 3340ST, 3540ST A, B, C, D, F, G, J 400ST, 4400ST A, B, C, D, F, G, H 3301ST, 3501ST, 3341ST, 3541ST A, B, C, D, F, G, H, J 4400ST, 4400ST C02221 A, B, C, D, F, G 3310ST, 3510ST, 3350ST, 3550ST A, B, C, D, F, G, J 1400ST, 450ST A, B, C, D, F, G, H 3311ST, 3511ST, 3351ST, 3551ST A, B, C, D, F, G, H, J 4410ST, 4450ST C02231 A, B, C, D, F, G P3300ST, P3500ST, P3340ST, P3540ST A, B, C, D, F, G, J P400ST, P440ST A, B, C, D, F, G, H P3301ST, P3501ST, P3341ST, P3541ST A, B, C, D, F, G, H, J P4400ST, P4440ST C02241 A, B, C, D, F, G P3310ST, P3510ST, P3350ST, P3550ST A, B, C, D, F, G, J P1400ST, P450ST A, B, C, D, F, G, H P3311ST, P3511ST, P3351ST, P3551ST A, B, C, D, F, G, H, J P4410ST, P4450ST C02251 A, B, C, D, F, G TJ3300ST, TJ3500ST A, B, C, D, F, G, J TJ400ST A, B, C, D, F, G, H TJ3301ST, TJ3501ST A, B, C, D, F, G, H, J TJ4400ST C02261 A, B, C, D, F, G TJ3310ST, TJ3510ST A, B, C, D, F, G, J TJ1400ST A, B, C, D, F, G, H TJ3311ST, TJ3511ST A, B, C, D, F, G, H, J TJ4410ST C02271 A, B, C, D, F, G TJ3300ST, TJ3500ST A, B, C, D, F, G, J TJ400ST A, B, C, D, F, G, H TJ3301ST, TJ3501ST A, B, C, D, F, G, H, J TJ4400ST C02281 A, B, C, D, F, G TJ3310ST, TJ3510ST A, B, C, D, F, G, J TJ1400ST A, B, C, D, F, G, H TJ3311ST, TJ3511ST A, B, C, D, F, G, H, J TJ4410ST


165

Series 3000-Modern Type, No Cover ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C03011 A, B, C, D, F 3100 A, B, C, D, F, H 3101, 51 A, D 50BC A, F 50DL C03012 A, D 5100 C03013 A, D 2300BC C03021 A, B, C, D, F PA3100, PR3100 A, B, C, D, F, H 3101, PA3101, PR3101 A, B, C, D, H 51, PA51, PR51 A, B, C, F, H 51DL, PA51DL, PR51DL A, B, C, D, F, G, H 3121, 5121, 3131, 5131 D 50BC, PA50BC, PR50BC F 50DL, PA50DL, PR50DL D, G 5120BC, 5130BC, UNI-50BC F, G 5120DL, 5130DL, UNI-50DL C03022 D 5100, PA5100 C03023 D PA2300BC C03031 D 50BC C03041 A, B, C, D, F 3100, TJ3100 A, B, C, D, F, H 3101, TJ3101 A, B, C, D, H 51, TJ51 A, B, C, F, H 51DL, TJ51DL A, B, C, D, F, G, H UNI-J3101 A, B, C, D, G, H UNI-J51 A, B, C, F, G, H UNI-J51DL A, B, C, D, F, G UNI-J3100 D 50BC, TJ50BC F 50DL, TJ50DL D, G UNI-J50 F, G UNI-J50DL C03042 A, D 5100, TJ5100 C03043 A, D 2300BC C03051 A, B, C, D, F 3110 A, B, C, D, F, H 3111, 151 D 150BC F 150DL C03052 D 5110 C03053 D 2310BC


166

C03061 A, B, C, D, F PA3110, PR3110 A, B, C, D, F, H 3111, PA3111, PR3111 A, B, C, D, H 151, PA151, PR151 A, B, C, F, H 151DL, PA151DL, PR151DL D 150BC, PA150BC F 150DL, PA150DL D PR150BC F PR150DL D, G 5120BC-T, 5130BCT, UNI-150 F, G 5120DL-T, 5130DL-T, UNI-150BC A, B, C, D, F, G, H 3121T, 5121T, UNI-151, 3131T, 5131T C03062 D 5110, PA5110 C03063 D PA2310BC C03071 D 150BC C03081 A, B, C, D, F 3110, TJ3110 A, B, C, D, F, G UNI-J3110 A, B, C, D, F, H 3111, TJ3111, 151, TJ151 A, B, C, D, F, G, H UNI-J3111, UNI-J151 D, G UNI-J150 D 150BC, TJ150BC C03082 D 5110, TJ5110 C03083 D 2310BC CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol Designation Primed for Painting 600 Bright Brass 605E Satin Brass 606E Bright Bronze 611E Satin Bronze 612E Oxidized Oil Rubbed Bronze 613E Bright Chrome 625E Dull Chrome 626E Aluminum Painted 689 Dark Statuary Bronze Painted 690 Dull Bronze Painted 691 Black Painted 693 Gold Painted 696

Auxiliary Locks

ANSI/BHMA A156.5

2009 DIRECTORY

Auxiliary Locks


168

GENERAL INFORMATION DESCRIPTION AND TYPE NUMBERS OF FUNCTION FROM A156.5 Bored Auxiliary Dead Latches Deadlocking latch bolt operated by key from either side. E0111 E0112 E0113 Deadlocking latch bolt operated by key from outside and by turn from inside. Latch bolt is held retracted by key or other mechanism. E0121 E0122 E0123 Deadlocking latch bolt operated by key from one side. Mounting plate on other side. E0131 E0132 Deadlocking latch bolt operated by turn from inside. No cylinder. Has mechanism to hold latch bolt retracted. E0181 E0182 Bored Auxiliary Dead Locks Dead bolt operated by key from either side. E0141 E0142 E0143 Dead bolt operated by key from outside and by turn from inside. E0151 E0152 E0153 Dead bolt operated by key from one side. Mounting plate on other side. E0161 E0162 E0163 Dead bolt operated by key from outside. Turn knob retracts dead bolt but does not project it. E0171 E0172 Dead bolt operated by turn from inside. No cylinder. E0191 E0192 E0193 Dead bolt operated by key from one side. No trim on other side. E0101 E0102 E0103 Dead bolt operated by key from either side. Key inside is non-removable when dead bolt is projected by key inside. E0201 E0202 E0203 Mortise Dead Locks Dead bolt operated by key from either side. E06061 E06062 Dead bolt operated by key from outside and by turn from inside. E06071 E06072 Dead bolt operated by key from one side only. E06081 E06082 Dead bolt operated by key from outside. Turn from inside retracts but does not project dead bolt. E06091 E06092


169

Mortise Dead Latches Latch bolt operated by key from outside and by turn from inside. Auxiliary dead latch. Both latches are held retracted by stop in front. E06101 E06102 Latch bolt operated by key from either side. Auxiliary dead latch. Both latches are held retracted by inside cylinder. E06111 E06112 Mortise Dead Locks For Sliding Doors Expanding or interlocking type dead bolt operated by key from either side. E06121 E06122 Expanding or interlocking type dead bolt operated by key from outside and by turn from inside. E06131 E06132 Expanding or interlocking type dead bolt operated by key from one side only. E06141 E06142 Mortise Dead Latches For Sliding Doors Hook type latch bolt operated by key from either side. E06151 Hook type latch bolt operated by key from outside and by handle from in-side. At manufacturer's option, flush handles are permitted to be provided, in which case key from outside locks or un-locks outside handle with inside handle always free. E06161 Narrow Stile Locks Dead lock: For single swinging doors. Key on both sides projects or retracts pivoted or conventional dead-locking bolt. Front is flat, radiused, beveled or radiused with integral weather seal. E0211 E0212 E0213 Dead lock: For single swinging doors. Key on outside, turn knob on in-side project or retract bolt; otherwise the same as types E0211, E0212, and E0213 E0221 E0222 E0223 Dead latch: For single swinging doors. Key on outside, paddle or lever on inside retracts latch bolt. Auxiliary dead latch. Latch bolts are held retract-ed when so actuated. E0231 E0232 Two point lock: For pairs of swinging doors. Key on both sides projects or retracts deadlocking bolt to or from horizontal position, engages strike in opposite door, and simultaneously projects or retracts a vertical drop bolt into threshold or floor strike. Front to be as in E0211. E0241


170

Two point lock: For pairs of swinging doors. Key on outside, turn knob on inside retract and project bolts; otherwise the same as type E0241. E0251 Three point lock: For pairs of swinging doors. Key on both sides projects or retracts deadlocking bolt to or from horizontal position, engages strike in opposite door and simultaneously projects or retracts a vertical drop bolt into threshold or floor strike, plus a positioner type bolt upward into the header. Drop bolt is located in the active leaf and the positioner bolt is located in the inactive leaf; otherwise the same as type E0241. E0261 Three point lock: For pairs of swinging doors. Key on outside and turn knob on inside project bolts; otherwise the same as type E0261. E0271 Dead lock: For sliding doors. Key on both sides projects or retracts pivoted hook type deadlocking bolt; otherwise same as type E0211, and E0212. E0281 E0282 Dead lock: For sliding doors. Key on outside and operating trim on inside project or retract pivoted hook type deadlocking bolt. E0291 E0292 Latch/lock: For single swinging doors. Key on both sides projects dead bolt and retracts both dead bolt and latch bolt. Handle on inside retracts latch bolt only. Has mechanism to hold latch bolt retracted. E02101 Rim Locks Latch bolt by key from outside and by turn from inside. Latch bolt is held retracted by device from inside. Regular bevel strike standard. Reverse bevel strike furnished when specified. E06211 E06212 E06213 Deadlocking latch bolt by key from outside and by turn from inside. Regular bevel strike standard. Reverse bevel strike furnished when specified. E06291 E06292 E06293 Dead bolt by key from outside and by turn from inside. Regular bevel strike standard. Reverse bevel strike furnished when specified. E06221 E06222 E06223 Rotary dead bolts operated by key from either side. Bolts are permitted to have hardened inserts. E06231 E06232 Rotary dead bolts operated by key from outside and by turn from inside. Bolts are permitted to have hardened inserts. E06241 E06242 Rotary dead bolts operated by key from outside only. Bolts are permitted to have hardened inserts. E06251 E06252


171

Interlocking dead bolt operated by key from either side. Specify regular or reverse bevel strike. Grade 1 has automatic shutter protecting the lock mechanism in the event the cylinder is removed. E06261 E06262 Interlocking dead bolt operated by key from outside and by turn from inside. Otherwise the same as types E06261 and E06262. E06271 E06272 Interlocking dead bolt operated by key from outside only. Otherwise the same as types E06261 and E06262. E06281 E06282 Interlocking dead bolt operated by key from either side. The lock is through bolted from the inside and engages a guard plate on the outside. Fasteners are not exposed on the outside. E06301 E06302 Interlocking dead bolt operated by key from outside and by turn from inside. Otherwise the same as types E06301 and E06302. E06311 E06312 Cylinders Mortise Cylinder: Threaded cylinder. Regularly supplied with straight or clover type cam. Consult manufacturers' catalogs for cylinder lengths and for cams and rings. The cylinder thread shall be 1.150 in-32 NS-2A. E09211 E09211A* E09213 Rim Cylinder: Has back plate with two attaching screws. Has flat type vertical or horizontal tail piece and raised trim ring. Consult manufacturers' catalogs for other tail pieces. E09221 E09221A* E09222 E09223 Suffix "A" refers to cylinders of pick and drill resistance - see paragraph 11.6. Bored Lock Cylinders; Furnished with tail pieces to suit locks -consult manufacturers' catalogs. E09231 E09231A* E09232 E09233


172



800-839-3157

CERTIFIED AUXILIARY LOCKS & ASSOCIATED PRODUCTS A156.5 2001

Auxiliary Locks ANSI Function Numbers Licensee’s Catalog Designations E0191 D60 E0151 D61, D61-IC, D71-IC E0141 D62, D62-IC E0161 D63, D63-IC, D73-IC E0171 D64, D64-IC E0192 E60 E0152 E61, E61-IC, EPC1-IC E0142 E62, E62-IC, EPC2-IC E0162 E63, E63-IC, EPC3-IC E0172 E64, E64-IC

CERTIFIED FINISHES

FINISH TYPE LICENSEE’S SYMBOL (s) Brass with a clear organic coating US3, US4 Satin Brass, blackened, satin relieved, Clear coated US5 Bronze with a clear organic coating US9, US10 Dark oxidized satin bronze, oil rubbed US10B Chrome over brass or bronze US26, US26D Brass with a clear organic coating over Zinc or steel US3, US4 Copper-Nickel-Chrome over zinc or steel US26, US26D


173

Baldwin Hardware Corporation 841 E. Wyomissing Blvd.

P.O. Box 15048 Reading, Pa. 19612

(610) 777-7811


Auxiliary Locks and Associated Products (A156.5) Bored Auxiliary Dead Locks – Grade 1

ANSI Function Number Series Available E0141 8000 Series 8200 Series E0151 8000 Series 8200 Series

Certified Finishes Finish Type Base Material Licensee’s Finish Symbol(s) Inorganic Coating Brass 003 (Bright Brass) Other finishes also available: Satin Brass & Black Brass 050 Oil Rubbed Bronze Brass 102 Bronze Brass 112 Satin Nickel Plated Brass 150 Bright Chrome Brass 260 Satin Chrome Brass 264 Antique Nickel Brass 151 Distressed Oil Rubbed Bronze Brass 402 Distressed Bronze Brass 412 Distressed Antique Nickel Brass 452


174



Phone: (317) 849-2250 Fax: (317) 806-3528 www.bestaccess.com

AUXILIARY LOCKS AND ASSOCIATED PRODUCTS

A156.5-2001

INTERCHANGEABLE CORE GRADE 1 ANSI Function # LICENSEE’S CATALOG DESIGNATION

MORTISE AND ALL OTHER LOCKS BORED LOCKS E19241 1CD 1C E19241 1CFD 1CF E19241 1CMD 1CM E19241 1CXD 1CX E19241 1CPD 1CP


175


CAL-ROYAL PRODUCTS, INC. 6605 FLOTILLA STREET COMMERCE, CA 90040 TEL: (323) 888-6601 & (800) 876-9258 FAX: (323) 888-6699 & (800) 222-3316 Email: [email protected]

Certified Auxiliary Locks & Associated Products A156.5 2008 Heavy Duty Deadbolts

ANSI Function # Designation Licensees Catalog Designation

GRADE 2 Deadbolts E0142 ULT360 Single Cylinder & Thumb turn E0152 ULT362 Double Cylinder E0192 E0193 CERTIFIED FINISHES FINISH TYPE BHMA CODE/ CATEGORY LICENSEE’S CATALOG Bright Brass 707, 677 (605E) US3 Satin Brass 688, 678 (606E) US4 Satin Bronze 709, 680 (612E) US10 Antique Bronze Oiled 710, 704 (613E) US10B Bright Chrome 712, 681 (625E) US26 Satin Chrome 713, 682 (626E) US26D Satin Stainless Steel 713, 630 (626E) US32D



176

CORBIN RUSSWIN INC. 255 EPISCOPAL ROAD

BERLIN, CT 06037 (860) 225-7411

CERTIFIED AUXILIARY LOCKS & ASSOCIATED PRODUCTS

ANSI/BHMA A156.5 – 2001

Auxiliary Dead Locks

ANSI Function Number Licensee’s Catalog Designation GRADE 2 E0142 SL4212 E0152 SL4213 E0162 SL4211

Cylinders ANSI Function Number GRADE 1 E09211 1000 Series E09211A* 1020, 1030 Series E09221 3000 Series E09221A* 3020, 3030 Series E09231 2000, 2100 Series E09231A* 2020, 8020 Series A* = Drill and pick resistant

CERTIFIED FINISHES

Finish Type (ANSI/BHMA): Licensee’s Symbol(s)

Bright brass, clear coated 605

Satin brass, clear coated 606

Bright bronze, clear coated 611

Satin bronze, clear coated 612

Bright chrome plated 625

Satin chrome plated 626

Bright stainless steel 629

Satin stainless steel 630


177

DORMA Architectural Hardware Dorma Drive, Reamstown, PA 17567


CERTIFIED AUXILIARY LOCKS

A156.5 – 2001

ANSI Function Number Licensee’s Catalog Designations E2152 DB660 E2142 DB662 E2151 D860 E2141 D862

E2161 D861 E2171 D863 E21111 D880 E2191 D881

CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol(s) Bright Brass, Clear Coated 605 Satin Brass, Clear Coated 606 Antique Satin Brass, Clear Coated 609 Satin Bronze, Clear Coated 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Bright Chrome Plated 625 Satin Chrome Plated 626 Bright Stainless Steel 629 Satin Stainless Steel 630


178



(800) 266-4456

CERTIFIED AUXILIARY LOCKS AND ASSOCIATED PRODUCTS A156.5-2001

Auxiliary Locks ANSI Function Numbers Licensee’s Catalog Designations E0141 D131 E0142 D231 E0151 D141 E0152 D241 E0161 D121 E0162 D221 E0171 D111 E0172 D211 E0192 D261 E01112 D261M Cylinders, Mortise ANSI Function Numbers Licensee’s Catalog Designations E09211 250, 251, 252, 253, C261, C262, C264, C265, 956, 957*, C976,

C977, 985*, 986*, C986, 987*, C987, 988*, C988, 990*, C990, 992*, C992

E09212 956, 957, 985, 986, 987, 988, 990, 992 Cylinders, Rim ANSI Function Numbers Licensee’s Catalog Designations E09221 951*, 952* E09222 951, 952, C952, C953 Cylinders, Bored and Interchangeable Core ANSI Function Numbers Licensee’s Catalog Designations E09231 A14921 thru A14929 (6 pin), A14943 thru A14945 (7 pin)

A23161 thru A23165 (6 pin), A23171 thru A23172 (7 pin) E09232 A14889 thru A14897, A23151 thru A23155 E09241** C606, C607 E09243 C606, C607 * With minimum 6 pin keys and pinning ** For Bored Locks


179

FALCON IR Security Technologies (Continued)



Brass with a Clear Organic Coating 605, 606 Bronze with a Clear Organic Coating 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 629, 630


180


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.5 2001

Auxiliary Locks & Associated Products BORED AUXILIARY DEAD LOCKS ANSI Licensee’s Licensee’s Catalog Designation Function Function Number Number Grade 1 Grade 2 E0141 14 3114 -- E0151 15 3115 -- E0171 18 3118 -- E0142 14 -- 3214 E0152 15 -- 3215 E0192 19 -- 3219 E0192 21 -- 3221 E01112 20 -- 3220


181




Licensee’s Catalog Designations ANSI ANSI Function Function Numbers Grade 1 Numbers Grade 2 E0141 QDB182 E0142 QDB282 QDB183 QDB283 E0151 QDB180 E0152 QDB280

QDB181 QDB281

E0193 QDB284

CERTIFIED FINISHES Licensee’s Finish Type BHMA Code Symbol Bright Brass with a Clear Organic Coating 605 3

Bright Brass plated on Steel with a Clear 632 3 Organic Coating

Bright Brass plated on Zinc with a 677 3 Clear Organic Coating

Black nickel plated, Satin relieved, on Brass, Steel or Zinc 609, 609E 5 With a clear organic coating

Oxidized Satin Bronze, Appearance Equivalent 613E (704, 727) 10B

Satin nickel plated, Clear Coated 619, 619E 15 on Brass, Steel or Zinc

Satin nickel plated, blackened, satin relieved 647 15A on Steel with a Clear Organic Coating

Chrome on Nickel on Brass 625, 626 26, 26D

Chrome on Nickel on Steel 651 26

Chrome on Nickel on Zinc 681, 682 26, 26D


182

Kaba Ilco Corporation 400 Jeffreys Road

Rocky Mount, NC 27802 (252) 446-3321

www.kaba-ilco.com

Auxiliary Locks & Associated Products A156.5 – 2001

Cylinders, Bored Locks ANSI Function Number Licensee’s Catalog Designations Grade 1 E09211 7000 Series Brass Mortise Cyl. Cylinders, Board Locks Grade 1 E09231 1539 Knob & Lever Cylinder 1599 Knob, Lever & Deadbolt Cyl.


183


www.kwikset.com


Licensee’s Catalog Designations ANSI ANSI ANSI Function Function Function Numbers Grade 1 Numbers Grade 2 Numbers Grade 3 E0141 984, 985 E0142 784, 785, 975 E0143 665, SD9200* E0151 980, 982 E0152 780, 782, 970 E0153 660, SD9100* E0193 663, SD9300* * SafeLock Brand by Black & Decker


Bright Brass plated on Steel with a Clear 632 3 Organic Coating

Bright Brass plated on Zinc with a 677 3 Clear Organic Coating

Bright Brass Anodized Aluminum 707 3

Bright Brass, Inorganic Coated 605E LO3 (Physical Vapor Deposition – PVD). Base Material: Brass

Black Nickel plated, satin relieved, on Brass, Steel or Zinc 609, 609E 5 with a Clear Organic Coating


Venetian Bronze, Clear Organic Coated Appearance Equivalent 616E 11P

Satin nickel plated, Clear Coated on Brass, Steel or Zinc 619, 619E 15

Satin nickel plated, blackened, satin relieved 620, 620E 15A on Brass or Zinc with a Clear Organic Coating






184


185

Medeco High Security Locks

3625 Allegheny Dr. Salem, VA 24153

(540) 380-5000

CERTIFIED AUXILIARY LOCKS & ASSOCIATED PRODUCTS ANSI/BHMA A156.5 2001

Auxiliary Locks

ANSI Function Numbers Licensee’s Catalog Designations

Grade 1

E0141A* 11WC622, 11WC322, 11TC622, 11TC322, 11WR524, 11WR624, 11TR524, 11TR624

E0151A* 11WC602, 11WC302, 11TC602, 11TC302, 11WR504, 11WR604, 11TR504, 11TR604

E0161A* 11WC642, 11WC692, 11WC342, 11WC392, 11TC642, 11TC692, 11TC342, 11TC392

E0171A* 11WC612, 11WC312, 11TC612, 11TC312

E01111 11-C282

E01201A* 11WC632, 11WC632T, 11TC632, 11TC632T, 11WR534, 11WR634, 11TR534, 11TR634

Suffix “A” refers to cylinders of pick and drill resistance Cylinders

ANSI Function Numbers Licensee’s Catalog Designations

Grade 1

E09211A* 10W, 10T Series Mortise

E09221A* 10W, 10T Series Rim

E09231A* 20W, 20T Series

E09241** 33K Series

E09241A* 32W, 32T Series

Suffix “A” refers to cylinders of pick and drill resistance

** For Bored Locks


186

Sargent Manufacturing Company 100 Sargent Drive

New Haven, CT 06511 (203) 562-2151

CERTIFIED AUXILIARY LOCKS & ASSOCIATED PRODUCTS A156.5-2001

Auxiliary Locks

ANSI Function Numbers Licensee’s Catalog Designation

Grade 2

E0142 454

E0152 455

E0162 456 Cylinders, Mortise Locks


Grade 1

E09211 41, 42, 43, 44, 46, 48, 50, 52, 54, 56 10-41, 10-42, 10-43, 10-44, 10-46, 10-48, 10-50, 10-52, 10-54, 10-56 11-41, 11-42, 11-43, 11-44, 11-46, 11-47, 11-48, 11-50, 11-52, 11-54, 11-56 50-41, 50-42, 50-43, 50-44 71, 72, 73, 74, 76 71-2, 72-2, 73-2, 74-2, 76-2 71-8, 72-8, 73-8, 74-8, 76-8 78-41, 78-42, 78-43, 78-44,

E09211A* 4271, 4272, 4273, 4274, 4276 4271-8, 4272-8, 4273-8, 4274-8, 4276-8 10-UL-41, 10-UL-42, 10-UL-43, 10-UL-44, 10-UL-46, 10-UL-48, 10-UL-50, 10-UL-52, 10-UL-54, 10-UL-56 VA41, VA42, VA43, VA44, VA45, VA46, VA47, VA48

* Suffix “A” refers to cylinders of pick and drill resistance.


187

Sargent Manufacturing Company – cont’d CERTIFIED AUXILIARY LOCKS & ASSOCIATED PRODUCTS

A156.5-2001 Cylinders, Rim


Grade 1

E09221 34, 10-34, 11-34, 64

E09221A* 4264, VA34S, VA34V, VA34L Cylinders, Bored Locks


Grade 1 E19231 13-4145, 13-4146 13-3266, 13-3492, 13-2194, 13-2195 13-3456, 13-3457, 13-3458 13-3713, 13-3827, 13-3857, 13-3858, 13-3859

E19231A* 82-48-1, 82-48-2, 82-10-1 VA-C8, VA-C10, VA-C480 Grade 2

E19232 13-3108, 13-3109, 13-3129, 13-3130 13-3526, 13-3547, 13-3495, 13-3496 13-3814, 13-3815, 13-3861, 13-3862 * Suffix “A” refers to cylinders of pick and drill resistance.


188



(719) 390-5071

CERTIFIED AUXILIARY LOCKS AND ASSOCIATED PRODUCTS A156.5-2001

Auxiliary Locks ANSI Function Numbers Licensee’s Catalog Designations E0112 B252PD E0122 B250PD E0141 B62P, B662P, B762P, F62(3) E0141A(1) B862P E0142 B262P, B362P, B562P, B562R, B662R, B762R E0143 B562GD, B662GD, JD62(2) E0151 B60P, B660P, B760P, F60(3) E0151A(1) B860P E0152 B260P, BE365, BE365F, BE367, BE367F, B360P, B560P,

B560R, B660R, B760R,

E0153 B560GD, B660GD, JD60(2) E0161 B661P, B761P E0161A(1) B861P E0162 B561P, B561R, B661R, B761R E0163 B561GD, B661GD E0171 B663P, B763P E0171A(1) B863P E0172 B563P, B563R, B663R, B763R E0173 B563GD, B663GD E0191 B80, B680 E0192 B280, B380, B580 Mortise Dead Locks ANSI Function Numbers Licensee’s Catalog Designations E06061 L462P E06062 L462R E06063 L462GD E06071 L460P E06072 L460R E06073 L460GD E06081 L464P E06082 L464R


189

SCHLAGE IR Security Technologies (Continued) Mortise Dead Locks, continued ANSI Function Numbers Licensee’s Catalog Designations E06083 L464GD E06091 L463P E06092 L463R E06093 L463GD

Cylinders, Mortise ANSI Function Numbers Licensee’s Catalog Designations E09211 20-001, 20-002, 20-009, 20-061, 20-700, 20-701, 20-705, 20-706, 20-

708, 20-722, 20-753, 20-763, 20-766, 20-771, 20-776, 20-782, 20-783, 20-787, 20-789, 20-793, 20-798, 30-001, 30-003, 30-004, 30-005, 30-006, 30-008, 30-021, 30-022, 30-023

E09211A(1) 20-500, 20-500XP, 20-501, 20-501XP, 20-505, 20-505XP, 20-506, 20-506XP, 20-508, 20-508XP, 20-553, 20-587, 20-587XP, 20-589, 20-589XP, 20-593, 20-593XP

E09212 20-776, 20-776XP, 20-782, 20-782XP, 20-783, 20-783XP, 20-798, 20-798XP, 30-008, 80-308

Cylinders, Rim ANSI Function Numbers Licensee’s Catalog Designations E09221 20-021, 20-022, 20-709, 20-710, 20-757 E09221A(1) 20-509, 20-509 XP, 20-510, 20-510 XP E09222 20-057, 20-757, 20-757XP, 80-329 Cylinders, Bored and Interchangeable Core ANSI Function Numbers Licensee’s Catalog Designations E09231 20-021, 20-126, 20-127, 20-139, 20-147, 20-719, 20-720, 20-723, 20-

724, 20-726, 20-727, 20-728, 20-729, 20-739, 20-747, 20-748, 20-750, 20-752, 20-760, 21-002, 21-003, 21-020, 21-028, 22-001, 22-002, 23-001, 23-003, 23-013, 23-014, 23-037, 23-038, 24-119, 24-120, 24-123, 24-200

E09231A(1) 20-519, 20-519XP, 20-520, 20-520XP, 20-523, 20-523XP, 20-524, 20-524XP, 20-526, 20-526XP, 20-527, 20-527XP, 20-528, 20-528XP, 20-529, 20-529XP, 20-539, 20-539XP, 20-547, 20-547XP, 20-548, 20-548XP, 20-550, 20-550XP, 20-552, 20-552XP, 20-560

E09232(4) 29-016, 29-017, 29-018, 29-300, 29-301 E09241(4) 20-740, 20-740XP, 23-030, 80-037 E09242 20-740, 20-740XP, 23-030 E09243 80-037 (1) Suffix “A” refers to pick and drill resistant cylinders (2) Dexter by Schlage products (3) Designates that only the Dead Bolt of this lock meets Grade 1 requirements (4) For Bored Locks Only


190

SCHLAGE IR Security Technologies (Continued)




609, 610 Bronze with a Clear Organic Coating 611,612, 616 Dark Oxidized Satin Bronze, Oil Rubbed 613 Satin Nickel Plated, Clear Coated 619 Brass with Satin Nickel Plated, Blackened, Satin Relieved, Clear Coated 620 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 629, 630


191

WEISER LOCK 6700 Weiser Lock Dr. Tucson, Arizona 85746

(520) 741-6200

Certified Auxiliary Locks and Latches (A156.5-2001)

Licensee’s Catalog Designation ANSI Function Number Grade 1 Grade 2 Grade 3 E0142 D4370, D9370X, HD9370U DC9370L, DB9370 PD4370, PD5370 E0152 D4470, D9470X, HD9470U DC9470L, DB9470 PD4370, PD5470 E0162 DC9670L, D9670H E0112 D830X E0122 D840X

CERTIFIED FINISHES Finish Type BHMA Code Licensee’s Symbol

Bright Brass, metallic coating 723 Brilliance

Bright Brass, with clear organic coating 605 US3

Antique Brass 609 US5

Bright Bronze, with clear organic coating 611 US9

Antique Bronze, colored organic coating 613 US10P

Venetian Bronze, clear organic coated 616 US11P

Satin nickel plated, clear organic coated 619 US15

Antique nickel plated, clear organic coated 621 US17A

Bright Chrome 625 US26

Satin Chrome 626 US26D

Satin stainless steel 630 US32D

Combined finishes See catalog


192


(704) 283-2101

CERTIFIED AUXILIARY LOCKS & ASSOCIATED PRODUCTS ANSI/BHMA A156.5 – 2001

Auxiliary Dead Locks

ANSI Function Number Licensee’s Catalog Designation GRADE 2 E0142 MD220 Series E0152 MD210 Series E0162 MD230 Series

Cylinders ANSI Function Number GRADE 1 E09211 2100 Series E09211A* 5100 Series E09221 1100 Series E09221A* 5100 Series E09231 1800 Series A* = Drill and pick resistant

CERTIFIED FINISHES











193

Yale Residential Security Products, Inc. 2725 B Northwoods Parkway

Norcross, GA 30071 (800) 542-7562

AUXILLIARY LOCKS & ASSOCIATED PRODUCTS

A156.5 2001

Licensee Catalog Designations

Grade 2 Grade 3 Function Number Yale Heritage Yale New Traditions EO142 84 840 EO152 82 820 EO192 880 EO193 860

CERTIFIED FINISHES

FINISH TYPE LICENSEE SYMBOL Brass with clear organic coating US3, US5

Chrome over brass US26, US26D Nickel over brass US15A

Door Controls – Overhead

Stops & Holders

ANSI/BHMA A156.8

2009 DIRECTORY

Door C

ontrols – O

verhead Stops &

Holders


195

GENERAL INFORMATION EXPLANATION OF NUMBERING SYSTEM First letter denotes the BHMA organizational Section (C) First numeral indicates general type of material used: O - Optional material Second numeral identifies the type of product: Type 1 - Overhead Concealed Slide Type - single or double acting, exterior or interior doors. Type 2 - Overhead Surface Slide Type - single acting, exterior or interior doors. Type 3 - Overhead Surface Jointed Arm - single acting, exterior or interior doors. Type 4 - Overhead Concealed Slide Type - single or double acting, interior doors. Type 5 - Overhead Surface Slide Type -single acting, interior doors. Type 6 - Overhead Concealed Slide Type - single or double acting, light interior doors. Type 7 - Overhead Surface Slide Type -single acting, light interior doors. Type 8 - Overhead Surface Rod Type - single acting, exterior or interior doors. Type 9 - Overhead Surface Other Types - single acting, exterior or interior doors. Third and fourth numerals indicate the function or specific description of each item: 51 - Hold Open 52 - Selective Hold Open - Manual Release 53 - Friction 54 - Stop Only 55 - Cantilever Fifth numeral designates the grade classification of the item: 1 - Grade 1 2 - Grade 2 3 - Grade 3 EXAMPLE: C02511 C - Section C 0 - Material (Optional) 2 - Type of Product (Overhead Surface Mounted Slide Type) 51 - Function (Hold open) 1 - Grade (Grade 1)


196

DORMA ARCHITECTURAL HARDWARE Dorma Drive, Reamstown, PA 17567


CERTIFIED OVERHEAD STOPS AND HOLDERS

A156.8 2000 ANSI Type No. Sec. 2 & 3 Options Certified Certified Licensee’s Series Designations C01511 2.2.1, 2.3.1 & 3 911H, 912H, 913H C01513 2.2,1, 2.3.1 & 3 711H, 712H, 713H C01541 2.2.5, 2.3.1 & 3 911S, 912S, 913S C01543 2.2,5, 2.3.1 & 3 711S, 712S, 713S C02511 2.2.1, 2.3.1 & 3 901H, 902H, 903H C02513 2.2.1, 2.3.1 & 3 701H, 702H, 703H C02541 2.2.5, 2.3.1 & 3 901S, 902S, 903S C02543 2.2.5, 2.3.1 & 3 701S, 702S, 703S C04511 2.2.1, 2.3.1 & 3 911H 912H, 913H C04513 2.2.1, 2.3.1 & 3 711H, 712H, 713H C04533 2.2.4, 2.3.1 & 3 711F, 712F, 713F C04541 2.2.5, 2.3.1 & 3 911S, 912S, 913S C04543 2.2.5, 2.3.1 & 3 711S, 712S, 713S C05511 2.2.1, 2.3.1 & 3 901H, 902H, 903H C05513 2.2.1, 2.3.1 & 3 701H, 702H, 703H C05533 2.2.4, 2.3.1 & 3 701F, 702F, 703F C05541 2.2.5, 2.3.1 & 3 901S, 902S, 903S C05543 2.2.5, 2.3.1 & 3 701S, 702S, 703S C06513 2.2.1, 2.3.1 & 3 711H, 712H, 713H C04533 2.2.4, 2.3.1 & 3 711F, 712F, 713F C06541 2.2.5, 2.3.1 & 3 711S, 712S, 713S


197

DORMA ARCHITECTURAL HARDWARE (continued) ANSI Type No. Sec. 2 & 3 Options Certified Certified Licensee’s Series Designations C07513 2.2.1, 2.3.1 & 3 701H, 702H, 703H C07533 2.2.4, 2.3.1 & 3 701F, 702F, 703F

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Licensee’s Symbol(s) Designations) Aluminum Painted (689) 689

Dark Bronze Painted (690) 690

Light Bronze Painted (691) 691

Black Painted (693) 693


Gold Painted (696) 696













198


NEW HAVEN, CT 06511 203/562-2151

CERTIFIED OVERHEAD STOPS AND HOLDERS

A156.8 2000 ANSI Type No. Sec. 2 & 3 Options Licensee’s Series Designations Certified Certified CO2511 2.2.1, 2.3.1 & 3 597H, 598H, 599H CO2541 2.2.5, 2.3.1 & 3 597S, 598S, 599S C01511 2.2.1, 2.3.1 & 3 697H, 698H, 699H CO1541 2.2.5, 2.3.1 & 3 697S, 698S, 699S

CERTIFIED FINISHES

Finish Type ANSI/BHMA Designations Licensee’s Symbol Polished Brass (605) US 3 Dull Brass (606) US 4 Bright Bronze, Clear Coated (637) US 9 Dull Bronze (612) US 10 Oxidized Dull Bronze, Oil Rubbed (613) US 10B Chrome (625) US 26 Dull Chrome (626) US 26D Satin Anodized Aluminum (628) US 28 Aluminum Enamel (689) EN Light Bronze Enamel (691) EP Oxidized Bronze Enamel 10B (690) EB Dark Statuary Bronze Enamel US 10 (693) ED Satin Brass Enamel, Similar to US 4 (696) EAB

Cabinet Hardware

ANSI/BHMA A156.9

2009 DIRECTORY

Cabinet H

ardware


200

GENERAL INFORMATION This information is included in the Directory as an aid to the user. Readers are cautioned not to rely on this information as describing total requirements and are urged to obtain copies of ANSI/BHMA A156.9 and other Standards referenced therein for complete information. EXPLANATION OF NUMBERING SYSTEM The prefix letter denotes the BHMA product class. The first numeral indicates the pre-dominant base material used. The first numeral 0 used permits the manufacturer to utilize optional materials which meet the performance requirements specified in this Standard. Users of the Standard wishing to relate a product to a specific basis material change the first numeral as listed in 6.5 or add "wood," "ceramic," "plastic," or other words after the number. The preference is to use "0" plus finish designation. First numeral base material designations: 1-Brass or Bronze (except wrought) 6-Malleable Iron 2-Wrought Brass or Bronze 7-Cast Iron 3-Aluminum (except wrought) 8-Wrought Steel 4-Wrought Aluminum 9-Zinc Alloys 5-Stainless Steel, 300 Series 0-Optional Material 6.6 The second numeral identifies the type of product: 1-Cabinet Hinges 2-Cabinet Pulls or Knobs 3-Cabinet Catches or Latches 4-Shelf Rests, Standards, Brackets 5-Drawer Slides 6-Rotating Shelves 7-Track and Guides for Sliding Panels The third and fourth numeral designates the function or specific description of each item. The fifth numeral indicates the grade of the product related to the performance level. 1-Grade 1 2-Grade 2 3-Grade 3 Example: B02131 B-Product Section 0-Optional Material 2-Cabinet Knob 13-Back Mounted 1-Grade 1 Finish Designation. For total specification, refer to ANSI/BHMA Standard A156.18 for

Materials and Finishes, for finish code number which describes finish of product and basis material to which that finish is applied. As all products currently manufactured to these

performance standards arenot in all the materials listed above, consult manufacturers' catalogs for availability.


201

12311 Shoemaker Ave. Santa Fe Springs, CA 90670

888-459-8624 Architectural Support 562-903-0200

562-903-0208 Fax www.accuride.com

A156.9 2003 Cabinet Hardware 4.11.5 Heavy Duty Drawer Slides ANSI Part # Slide Type Load Rating Licensee Model # Finish B05111 Side Mount 100 lbs. 3832SC Zinc, Black, White B05111 Rail Mount 100 lbs. 7434 Zinc B05111 Rail Mount 200 lbs. 3640 Zinc B05111 Side Mount 500 lbs. 9301 Zinc B05111 Undermount 100 lbs. 3132SC Zinc B05111 Undermount 100 lbs. 3132EC Zinc

Cabinet Locks

ANSI/BHMA A156.11

2009 DIRECTORY

Cabinet Locks


203

GENERAL INFORMATION

EXPLANATION OF IDENTIFYING NUMBERS

First letter denotes BHMA Product Section (E).

First numeral indicated material used: 0 - Optional Material.

Second numeral identifies the type of product: 7 - Cabinet Locks.

The third and fourth numerals are non-significant and are function identifications.

The fifth numeral designates the grade classification of the Cabinet Lock: 1-Grade 1, 2-Grade 2, and 3-Grade 3.

Example of Identifying Number:

E07112 E - Section (E) 0 - Material (optional) 7 - Type of product (Cabinet Lock) 11 - Function of Lock (Door Lock with dead bolt half mortised into back of door) 2 - Grade (Grade 2)


204

CompX National P.O. Box 200

Mauldin, SC 29662 864.297.6655

compx.com/csp.html

ANSI/BHMA A156.11-2004 Cabinet Locks ANSI Function Application Licensee Catalog Designations E07121 – Grade 1 Door C8173, C8174, C8175 w/ stainless steel dead bolt E07041 – Grade 1 Drawer C8177, C8178, C8179 w/ stainless steel dead bolt E07122 – Grade 2 Door *C8173, C8174, C8175 w/ brass dead bolt E07042 – Grade 2 Drawer *C8177, C8178, C8179 w/ brass dead bolt *STOCK LOCKS® product; ships within 24 – 48 hours Grades 1 & 2 available in KA, KD, MKKD & MKKA All products listed come standard with Advantage Plus™, allows users to remove locking cylinder for re-keying while the lock body remains in place; no mounting screws need to be removed. compx.com/products-advplus-mov.html

Certified Finish Finish Type Licensee’s Symbol Dull Chrome 26D

Interconnected Locks &

Latches

ANSI/BHMA A156.12

2009 DIRECTORY

Interconnected Locks &

Latches


206

GENERAL INFORMATION DESCRIPTION AND NUMBER OF SERIES 5000 INTERCONNECTED LOCK FUNCTIONS (A156.12) F95 Entry Lock Latch bolt operated by lever from either side. Rotating turn from inside or key from outside extends dead bolt to locked position. Both dead bolt and latch bolt are retracted to unlocked position by operating inside lever. F96 Entry Lock Deadlocking latch bolt is operated by lever from either side except when outside lever is made inoperable by locking device inside. When outside lever is locked, deadlocking latch bolt is operated by key outside restoring inside locking devices to unlocked position. Rotating turn from inside or key from outside extends dead bolt to locked position. Operating inside lever retracts both dead bolt and latch bolt. Closing door shall not release locking device inside. F97 Entry Lock Deadlocking latch bolt is operated by lever from either side except when outside lever is made inoperable by locking device inside.When outside lever is locked, deadlocking latch bolt isperated by key outside. Inside locking device is manually operated to unlock outside lever. Rotating turn from inside or key from outside extends dead bolt to locked position. Operating inside lever retracts both dead bolt and latch bolt. Closing door shall not release locking device inside. F98 Storeroom Lock Key in upper cylinder projects or retracts dead bolt. Inside lever retracts both dead bolt and latch bolt. Deadlocking latch bolt is operated by key in lever outside or by operating inside lever. Outside lever always inoperable. At the option of the individual manufacturer, operating the key in the outside lever shall permit the latch bolt to be retracted by operating the outside lever, providing the key cannot be removed in the unlocked position. F99 Dormitory Lock Deadlocking latch bolt is operated by lever from either side except when outside lever is made inoperable by locking device inside. When outside lever is locked, deadlocking latch bolt is operated by key outside, restoring inside locking device to unlocked position. Operating inside lever retracts both dead bolt and latch bolt. Closing door releases locking device inside. F100 Hotel Motel Lock Deadlocking latch bolt is operated by key outside or operating inside lever. Outside lever is always inoperable. Rotating turn from inside or key from outside shall extend dead bolt to locked position. Both dead bolt and deadlocking latch bolt are permitted to be retracted individually by key outside. Operating inside lever retracts both dead bolt and latch bolt. A visual occupancy indicator shall be operated from inside and shut out all keys in lever or knob except an emergency key. Operating inside lever shall release indicator and shut out feature unless fixed in a shut out position by a special tool.


207

F102 Handle Set Trim Thumbpiece on outside and lever on inside retracts latch. Rotating turn from inside or key from outside extends dead bolt to locked position. Both dead bolt and latch bolt are retracted to unlocked position by operating inside lever. F103 Handle Set Trim Deadlocking latch bolt is operated by thumbpiece outside or lever inside except when outside thumbpiece is locked or made inoperative by locking device inside or by key outside. When outside thumbpiece is locked or inoperative, deadlocking latch bolt and dead bolt are retracted by key or key and thumbpiece operation outside, or by operating inside lever. Rotating turn inside or key outside extends dead bolt to locked position. Thumbpiece outside remains locked or inoperative until unlocked by locking device inside or by key outside. F104 Entry Lock Deadlocking latch bolt is operated by lever from either side except when outside lever or knob is made inoperable by locking device inside. When outside lever is locked, deadlocking latch bolt is operated by key outside, restoring inside locking device to unlocked position. Rotating turn from inside or key from outside extends dead bolt to locked position. Operating inside lever, key outside and turn inside bolt retract both dead bolt and deadlocking latch. Closing door shall not release locking device inside. F105 Entry Lock Deadlocking latch bolt is operated by lever from either side except when outside lever is made inoperable by locking device inside. When outside lever is locked, deadlocking latch bolt is operated by key outside. Inside locking device shall be manually operated to unlock outside lever. Rotating turn from inside or key from outside extends dead bolt to locked position. Operating inside lever, key outside and turn inside retract both dead bolt and latch bolt. Closing door shall not release locking device inside. F106 Dormitory Lock Deadlocking latch bolt is operated by lever from either side except when outside lever is made inoperable by locking device inside. When outside lever is locked, deadlocking latch bolt is operated by key outside, restoring inside locking device to unlocked position. Rotating turn from inside or key from outside extends dead bolt to locked position. Operating inside lever, key outside and turn inside retract both dead bolt and latch. Closing door releases locking device inside.


208

DORMA Architectural Hardware

Dorma Drive, Reamstown, PA 17567 717-336-3881

www.dorma-usa.com

CERTIFIED LOCKS & LATCHES A156.12 – 2005

Series 5000 Interconnected Locks

ANSI Licensee’s Catalog Designations Function Number GRADE 2 F95 J210 F97 J253

CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol(s) Bright Brass, Inorganic Coated (Physical Vapor Deposition – PVD) 605 Dark Oxidized Satin Bronze, Oil Rubbed 613 Satin Nickel Plated, Clear Coated 619 Satin Chrome Plated 626

http://www.dorma-usa.com/�


209


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.12 2005 Interconnected Locks SERIES 5000 – INTERCONNECTED LOCK ANSI Licensee’s Licensee’s Catalog Designation Function Function Number Number Grade 2 F95 10 3710 F97 53 3753


210



CERTIFIED INTERCONNECTED LOCKS & LATCHES A156.12-2005


ANSI Function Numbers Grade 2 F95 QCI230 / QCI231 F97 QCI250 / QCI251

CERTIFIED FINISHES

Licensee’s Finish Type BHMA Code Symbol Bright Brass with a Clear Organic Coating 605 3 Oxidized Satin Bronze, Appearance Equivalent 613E (704, 727) 10B Satin nickel plated, Clear Coated on Brass, Steel or Zinc 619, 619E 15 Chrome on Nickel on Brass 625, 626 26, 26D

http://www.k2commericalhardware.com/�


211


www.kwikset.com

CERTIFIED INTERCONNECTED LOCKS & LATCHES A156.12-2005


ANSI Function Numbers Grade 2 Grade 3 F96 508 507 F97 506 505


Bright Brass plated on Steel with a Clear Organic Coating 632 3

Bright Brass plated on Zinc with a Clear Organic Coating 677 3

Bright Brass Anodized Aluminum 707 3

Bright Brass, Inorganic Coated 605E LO3 (Physical Vapor Deposition – PVD). Base Material: Brass, Zinc

Black Nickel plated, satin relieved, on Brass, Steel or Zinc 609, 609E 5 with a Clear Organic Coating


Venetian Bronze, Clear Organic Coated Appearance Equivalent 616E 11P

Satin nickel plated, Clear Coated on Brass, Steel or Zinc 619, 619E 15

Satin nickel plated, blackened, satin relieved 620, 620E 15A on Brass or Zinc with a Clear Organic Coating






212



(719) 390-5071


Series 5000 – INTERCONNECTED LOCKS ANSI Function


Numbers Grade 2 F97-2 S251




609 Bronze with a Clear Organic Coating 612, 616 Dark Oxidized Satin Bronze, Oil Rubbed 613 Satin Nickel Plated, Clear Coated 619 Brass with Satin Nickel Plated, Blackened, Satin Relieved, Clear Coated 620 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 629, 630

Mortise Locks & Latches

ANSI/BHMA A156.13

2009 DIRECTORY

Mortise Locks &

Latches


214

GENERAL INFORMATION DESCRIPTION AND NUMBER OF SERIES 1000 MORTISE LOCK FUNCTIONS (A156.13) FUNCTION NUMBER AND DESCRIPTIONS In the following mortise lock descriptions, the functions are described using lever trim for brevity and clarity. It is acceptable to use models with knobs, paddles, or thumb pieces wherever levers are referenced. Some functions may be available with electrical operation in place of mechanical operation. The basic function shall remain the same as described. F01 Passage or Closet Latch Latch bolt operated by lever from either side at all times. F02 Privacy, Bedroom or Bath Lock Latch bolt operated by lever from either side. Dead bolt operated by turn from inside and by emergency release from outside. F03 Communicating Lock Latch bolt operated by lever from either side. Two dead bolts or split dead bolt operated independently by turns from both sides. Not to be used on doors in rooms that have no other entrance. F04 Entry Lock Latch bolt operated by lever from either side except when outside lever is made inoperative by a stop or mechanical means other than key. When outside lever is locked, latch bolt is retracted by key from outside or by operating inside lever. Auxiliary dead latch. F05 Classroom Lock Latch bolt operated by lever from either side except when outside lever or knob is locked from outside by key or push button mechanism. When outside lever is locked, latch bolt is retracted by key, or by operating key or push button mechanism and outside lever from outside or by operating inside lever. Auxiliary dead latch. F06 Holdback Lock Latch bolt operated by lever from either side except when outside lever is locked from outside by key. Latch bolt can be locked in a retracted position by key. When outside lever is locked, latch bolt is retracted by key from outside or by operating inside lever unless latch bolt has been locked in a retracted position. Auxiliary dead latch. F07 Storeroom or Closet Lock Latch bolt operated by key from outside or by operating inside lever. Outside lever is always inoperative. Auxiliary dead latch. F08 or F10 Front Door Lock or Apartment Corridor Door Lock Latch bolt is operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than key. Dead bolt is operated by turn inside. Key outside operates both bolts. F09 Apartment, Exit or Public Toilet Lock Latch bolt operated by lever from either side, except when outside lever is locked by key from inside. When outside lever is locked, latch bolt is retracted by key from outside or by operating inside lever. Auxiliary dead latch.


215

F10 See F08 F11 Dormitory or Exit Lock Latch bolt operated by lever from either side except when outside lever is made inoperative by a stop or mechanical means other than key. Dead bolt projected by key from either side. Dead bolt retracted by key from outside. Both bolts retracted by inside lever and outside remain locked. F12 Dormitory or Exit Lock Latch bolt operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than key. Dead bolt projected by key from outside and by turn from inside. Dead bolt retracted by key from outside and by turn from inside. Operating inside lever retracts both bolts and outside remains locked. F13 Dormitory or Exit Lock Latch bolt operated by lever from either side. Dead bolt projected by key from outside and turn from inside. Operating inside lever retracts both bolts and unlocks outside. F14 Store Door Lock Latch bolt operated by lever from either side. Dead bolt operated by key from either side. F15 Hotel Guest Lock Latch bolt operated by key from outside or by operating inside lever. Outside lever is always inoperative. Dead bolt projected by turn from inside and all keys except emergency and display key are shut out. Operating inside lever retracts both bolts. Auxiliary dead latch. Indicator button when so specified. F16 Dead Lock Dead bolt operated by key from either side. F17 Dead Lock Dead bolt operated by key from outside and by turn from inside. F18 Dead Lock Dead bolt operated by key from outside only. F19 Privacy, Bedroom or Bath Lock Latch bolt operated by lever from either side. Dead bolt operated by turn from inside and emergency release from outside. Operating inside lever retracts both bolts. F20 Apartment Corridor Door Lock Latch bolt operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than key. Dead bolt operated by key outside or turn inside. Key outside operates both bolts. Operating inside lever retracts both bolts and outside remains locked. Latch bolt is deadlocked when outside lever is made inoperative or when the dead bolt is projected. When dead bolt is retracted, lever is unlocked by stop or mechanical means other than key. F21 Room Door Lock Latch bolt operated by lever from either side. Dead bolt operated by key from outside and turn from inside.


216

F22 Privacy, Bedroom or Bath Lock Latch bolt operated by lever from either side except when outside lever is locked by inside turn or button. Operating inside lever, closing door or operating outside emergency release unlocks outside lever. F23 Function obsolete. F24 Apartment or Store Door Handle Lock Latch bolt operated by thumb piece on both sides, except when outside thumb piece is locked by key from inside. When outside thumb piece is locked, latch bolt is retracted by key outside or by thumb piece inside. Auxiliary dead latch. F25 Store Door Handle Lock Latch bolt operated by thumb piece from either side. Dead bolt operated by key from either side. F26 Institutional Privacy Latch bolt operated by lever from either side except when outside lever is locked by turn inside. Latch bolt by key outside with override of turn inside when manually held in locked position. Operating inside lever or closing door unlocks outside lever. Auxiliary dead latch. F27 Automatic Dead Bolt Lock Dead bolt projected by depressing auxiliary latch or other device to sense door closure. Dead locking latch bolt. Dead and latch bolts remain dead locked if auxiliary latch is extended before dead bolt is retracted. Rotating inside lever retracts bolts. When outside lever is locked, all bolts are retracted by key, or by operating key and outside lever. F28 Automatic Dead Bolt Lock Dead bolt projected by depressing auxiliary latch or other device to sense door closure. Rotating inside lever retracts bolt. When outside lever is locked, bolt is retracted by key, or by operating key and outside lever. F29 Classroom Dead Lock Key from outside operates dead bolt. Turn from inside retracts but does not project dead bolt. F30 Asylum or Institutional Lock Latch bolt operated by key from either side. Both levers always inoperative. Auxiliary dead latch. F31 Exit or Communicating Lock Latch bolt operated by lever from inside. Non removable blank trim or no trim outside. Auxiliary dead latch. F32 Intruder Latch Bolt Lock Latch bolt operated by lever from either side except when outside lever is locked from inside or outside by key. When outside lever is locked, latch bolt is retracted by key from inside or outside or by operating inside lever. Auxiliary dead latch. F33 Intruder Dead Bolt Lock Latch bolt operated by lever from either side except when outside lever is locked from inside or outside by key. Dead bolt retracted by key from inside or outside. Operating inside lever retracts both bolts and unlocks outside.


217

F34 Intruder Dead Bolt Lock Latch bolt operated by lever from either side except when outside lever is locked from inside or outside by key. Dead bolt retracted by key from inside or outside. Operating inside lever retracts both bolts and unlocks outside. Auxiliary dead latch or latch bolt dead locked when dead bolt is thrown. F35 Store Door Lock Latch bolt operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than key. Dead bolt operated by key from either side.


218

ARROW LOCK MANUFACTURING COMPANY


800-839-3157

CERTIFIED LOCKS AND LATCHES A156.13 2002

Series 1000 – Mortise CERTIFIED FOR OPERATIONAL GRADE 1, SECURITY GRADE 2 ANSI Function Numbers Licensee’s Catalog Designations Knob Series Lever Series F01 AM01 BM01 F04 AM22 BM22 F05 AM17 BM17 F07 AM12 BM12 F08, F10 AM21 BM21 F09 AM32 BM32 F12 AM11 BM11 F13 AM19 BM19 F14 AM31 BM31 F15 AM15, AM16 BM15, BM16 F16 AM42 F17 AM41 F18 AM40 F19 AM02 BM02 F20 AM20 BM20 F21 AM13 BM13 F30 AM33 BM33 F31 AM07 BM07 F32 AM37 BM37 F35 AM34 BM34 Note: Interchangeable Core (IC) option also applicable for all keyed functions listed.

CERTIFIED FINISHES FINISH TYPE LICENSEE’S SYMBOL (s) Brass with a clear organic coating US3, US4 Bronze with a clear organic coating US9, US10 Chrome over brass or bronze US26, US26D Stainless Steel 300 series US32, US32D Brass with a clear organic coating over Zinc or steel US3, US4 Copper-Nickel-Chrome over zinc or steel US26, US26D


219



Phone: (317) 849-2250 Fax: (317) 806-3528

www.bestaccess.com

CERTIFIED LOCKS AND LATCHES A156.13 – 2002

Series 1000 - Mortise ANSI Function Numbers License’s Catalog Designations

CERTIFIED FOR OPERATIONAL GRADES: Grade 1 F01 34H_N, 35H_N 45H_N F02 34H_L, 35H_L 45H_LB F04 34H_E, 35H_E, 36H_E, 37H_E 45H_A, 47H_A F05 34H_J, 35H_J, 36H_J, 37H_J 45H_R, 47H_R F07 34H_EW, 35H_EW, 36H_EW,

37H_EW 45H_D, 47H_D

F08 34H_A, 35H_A, 36H_A, 37H_A 45H_BA, 47H_BA F09 34H_G, 35H_G, 36H_G, 37H_G F10 34H_A, 35H_A, 36H_A, 37H_A 45H_BA, 47H_BA F12 34H_F, 35H_F, 36H_F, 37H_F 45H_TA, 47H_TA F13 34H_FW, 35H_FW, 36H_FW, 37H_FW 45H_T, 47H_T F14 34H_C, 35H_C, 36H_C, 37H_C 45H_G, 47H_G F15 34H_HF, 35H_HF, 36H_HF, 37H_HF F15 34H_HJ, 35H_HJ, 36H_HJ, 37H_HJ 45H_HJ, 47H_HJ F16 34H_T, 36H_T 45H_WD, 47H_WD F17 34H_P, 36H_P 45H_AD, 47H_AD F18 34H_S, 36H_S 45H_YD, 47H_YD F19 34H_LF, 35H_LF 45H_L, 47H_L F20 34H_AW, 35H_AW 45H_AB, 47H_AB F21 34H_B, 35H_B, 36H_B, 37H_B 45H_B, 47H_B


220

CERTIFIED FOR SECURITY GRADES: Grade 2* Grade 1 F01 34H_N, 35H_N F02 34H_L, 35H_L F04 34H_E, 35H_E 45H_A 36H_E, 37H_E 47H_A F05 34H_J, 35H_J 45H_R 36H_J, 37H_J 47H_R F07 34H_EW, 35H_EW 45H_D 36H_EW, 37H_EW 47H_D F08 34H_A, 35H_A 45H_BA 36H_A, 37H_A 47H_BA F09 34H_G, 35H_G 36H_G, 37H_G F10 34H_A, 35H_A 45H_BA 36H_A, 37H_A 47H_BA F12 34H_F, 35H_F 45H_TA 36H_F, 37H_F 47H_TA F13 34H_FW, 35H_FW 45H_T 36H_FW, 37H_FW 47H_T F14 34H_C, 35H_C 45H_G 36H_C, 37H_C 47H_G F15 34H_HF, 35H_HF 36H_HF, 37H_HF F15 34H_HJ, 35H_HJ 45H_HJ 36H_HJ, 37H_HJ 47H_HJ F16 34H_T 45H_WD 36H_T 47H_WD F17 34H_P 45H_AD 36H_P 47H_AD F18 34H_S 45H_YD 36H_S 47H_YD F19 34H_LF, 35H_LF 45H_L F20 34H_AW, 35H_AW 45H_AB F21 34H_B, 35H_B 45H_B 36H_B, 37H_B 47H_B

* When used with BEST’s 1CD core


221

CORBIN RUSSWIN, INC.

255 EPISCOPAL ROAD BERLIN, CT 06037

(860) 225-7411

CERTIFIED LOCKS & LATCHES ANSI/BHMA A156.13 – 2002

CERTIFIED FOR OPERATIONAL GRADES:

GRADE 1 ANSI Function Number Licensee’s Catalog Designations F01 ML2010, ML2010HS, ML2010VR F02 ML2020, ML2020HS, ML2020VR F04 ML2051, ML2051HS, ML2051VR ML2053, ML2053HS, ML2053VR F05 ML2055, ML2055HS, ML2055VR F06 ML2056, ML2056HS, ML2056VR F07 ML2057, ML2057HS, ML2057VR F09 ML2042, ML2042HS, ML2042VR F10 ML2048, ML2048HS, ML2048VR F11 ML2082, ML2082HS, ML2082VR F12 ML2067, ML2067HS, ML2067VR F13 ML2065, ML2065HS, ML2065VR F14 ML2022, ML2022HS, ML2022VR F15 ML2029, ML2029HS, ML2029VR F16 ML2012, ML2012VR F17 ML2013, ML2013HS, ML2013VR F18 ML2011, ML2011VR F19 ML2030, ML2030HS, ML2030VR F21 ML2024, ML2024HS, ML2024VR F22 ML2060, ML2060VR F33 ML2062, ML2062HS, ML2062VR F34* ML2072, ML2072HS, ML2072VR * Exception, consult product catalog for inside/outside locking variation.


222

CERTIFIED FOR SECURITY GRADES: GRADE 1 GRADE 3 F04 ML2051, ML2051HS, ML2051VR ML2051 x MR ML2053, ML2053HS, ML2053VR ML2053 x MR F05 ML2055, ML2055HS, ML2055VR ML2055 x MR F06 ML2056, ML2056HS, ML2056VR ML2056 x MR F07 ML2057, ML2057HS, ML2057VR ML2057 x MR F09 ML2042, ML2042HS, ML2042VR ML2042 x MR F10 ML2048, ML2048HS, ML2048VR ML2048 x MR F11 ML2082, ML2082HS, ML2082VR ML2082 x MR F12 ML2067, ML2067HS, ML2067VR ML2067 x MR F13 ML2065, ML2065HS, ML2065VR ML2065 x MR CORBIN RUSSWIN, INC. – A156.13 (continued) F14 ML2022, ML2022HS, ML2022VR ML2022 x MR F15 ML2029, ML2029HS, ML2029VR F16 ML2012, ML2012VR ML2012 x MR F17 ML2013, ML2013HS, ML2013VR ML2013 x MR F18 ML2011 F21 ML2024, ML2024HS, ML2024VR ML2024 x MR F33 ML2062, ML2062HS, ML2062VR ML2062 x MR F34* ML2072, ML2072HS, ML2072VR ML2072 x MR * Exception, consult product catalog for inside/outside locking variation.

CERTIFIED FINISHES






Dark oxidized satin bronze, oil rubbed 613






223

DORMA Architectural Hardware Dorma Drive, Reamstown, PA 17567



A156.13 - 2005 Series 1000 – Mortise

ANSI Function Numbers Licensee’s Catalog Designations CERTIFIED FOR OPERATIONAL GRADES: Grade 1 F01 ML9010, MK9010 F04 ML9050, MK9050 F05 ML9070, MK9070 F06 ML9076, MK9076 F07 ML9080, MK9080 F09 ML9060, MK9060 F20 ML9953, MK9953 F11 ML9957, MK9957 F13 ML9956, MK9956 F14 ML9966, MK9966 F15 ML9985, MK9985 F16 MB9962 F17 MB9960 F18 MB9961 F19 ML9940, MK9940 F21 ML9973, MK9973 F22 ML9040, MK9040 F29 MB9963 F30 ML9082, MK9082 F31 ML9025, MK9025 F32 ML9071 F33 ML9968, MK9968 F34 ML9967, MK9967 F35 ML9958, MK9958


224

DORMA Architectural Hardware (Continued)

Series 1000 – Mortise ANSI Function Numbers Licensee’s Catalog Designations CERTIFIED FOR SECURITY GRADES: Grade 1 F04 ML9050, MK9050 F05 ML9070, MK9070 F06 ML9076, MK9076 F07 ML9080, MK9080 F09 ML9060, MK9060 F20 ML9953, MK9953 F11 ML9957, MK9957 F13 ML9956, MK9956 F14 ML9966, MK9966 F15 ML9985, MK9985 F16 MB9962 F17 MB9960 F18 MB9961 F21 ML9973, MK9973 F29 MB9963 F30 ML9082, MK9082 F32 ML9071 F33 ML9968, MK9968 F34 ML9967, MK9967 F35 ML9958, MK9958

CERTIFIED FINISHES Finish Type (ANSI/BHMA Designation) Licensee’s Symbol(s) Bright Brass, Clear Coated 605 Satin Brass, Clear Coated 606 Bright Bronze, Clear Coated 611 Satin Bronze, Clear Coated 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Bright Chrome Plated 625 Satin Chrome Plated 626 Bright Stainless Steel 629 Satin Stainless Steel 630


225


A156.13 – 2005 GRADE 1 MORTISE LOCKSET

ANSI PART #

LOCK GRADE DORMA #

A156.13 Mortise Lockset; Entrance 1 DL1953 A156.13 Mortise Lockset; Office 1 DL1050 A156.13 Mortise Lockset; Apartment 1 DL1060 A156.13 Mortise Lockset; Classroom 1 DL1070 A156.13 Mortise Lockset; Storeroom 1 DL1080 A156.13 Mortise Lockset; Privacy 1 DL1040 A156.13 Mortise Lockset; Passage 1 DL1010 A156.13 Mortise Lockset; Deadlock 1 DL1960 A156.13 Mortise Lockset; Deadlock w/o

turn 1 DL1961 A156.13 Mortise Lockset; Corridor 1 DL1956 VERIFICATION REPORT NUMBERS: GZ08070287-2 GZ08070287-2 GZ08070287-4 SUBSECTION TEST DESCRIPTION RESULT 9.0 Operational Test Compliant 10.0 Security Test Compliant 11.0 Cycle Test Compliant 13.0 Material Evaluation Test Compliant


226


227



(800) 266-4456


Series 1000 – MORTISE ANSI Function


Numbers CERTIFIED FOR OPERATIONAL GRADES: Grade 1 F01 M101 F02 M301 F04 M521 F05 M561 F07 M581 F08 M621 F09 M381 F10 M531 F12 M531 F13 M571 F14 M371 F15 (Mod) M451 F16 M931 F17 M941 F18 M921 F19 M311 F20 M531 F21 M541 F22 M321

CERTIFIED FOR SECURITY GRADES: Grade 2 Grade 3 F04 M521 M521 F05 M561 M561 F07 M581 M581 F08 M621 M621 F09 M381 M381 F10 M531 M531


228

FALCON IR Security Technologies (Continued)

ANSI Function


Numbers CERTIFIED FOR SECURITY GRADES: Grade 2 Grade 3 F11 M361 M361 F12 M531 M531 F13 M571 M571 F14 M371 M371 F15 (Mod) M451 M451 F16 M931 M931 F17 M941 M941 F18 M921 M921 F19 M311 M311 F20 M531 M531 F21 M541 M541 F22 M321 M321

CERTIFIED FINISHES

Finish Type


Brass with a Clear Organic Coating 605, 606 Bronze with a Clear Organic Coating 612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 630


229

A156.13 – 2005 GRADE 1 MORTISE LOCKSET

ANSI PART #

HINGE GRADE GSH #

A156.13 8720 Mortise Lockset; Entrance 1 GSH8720 A156.13 8704 Mortise Lockset; Office 1 GSH8704 A156.13 8705 Mortise Lockset; Classroom 1 GSH8705 A156.13 8707 Mortise Lockset; Storeroom 1 GSH8707 A156.13 8722 Mortise Lockset; Privacy GSH8722 A156.13 8701 Mortise Lockset; Passage 1 GSH8701 A156.13 8717 Mortise Lockset; Deadlock 1 GSH8717 A156.13 8718 Mortise Lockset; Deadlock w/o

turn 1 GSH8717 A156.13 8713 Mortise Lockset; Corridor 1 GSH8713 VERIFICATION REPORT NUMBERS: GZ08070287-2 GZ08070287-2 GZ08070287-4 SUBSECTION TEST DESCRIPTION RESULT 9.0 Operational Test Compliant 10.0 Security Test Compliant 11.0 Cycle Test Compliant 13.0 Material Evaluation Test Compliant


230


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com


A156.13 2002 Mortise Locks SERIES 1000 – MORTISE LOCK Certified for both Operational & Security Grade 1: ANSI Function Licensee’s Catalog Designation F01* 3810 ESC, SECT F04 3850 ESC, SECT F05 3870 ESC, SECT F07 3880 ESC, SECT F16 3862 SECT F17 3860 SECT F18 3864 SECT F20 3853 ESC, SECT F22* 3840 ESC, SECT F29 3863 SECT *Security Grade does not apply due to lock function.


231

Kaba ILCO Corporation

2941 Indiana Avenue Winston-Salem, NC 27105

336-725-1331 www.kaba-ilco.com


A156.13 Mortise Locks and Latches Series 1000


F04, F07, F08, F10, F15 Series E5000, E5200, E5700

CERTIFIED FINISHES Satin Chrome over zinc 626E (26D) Bright Chrome over zinc 625E (25)

Satin Brass over zinc 606E (04) Bright Brass over zinc 605E (03)

Black Powder Paint over zinc 676 Duranodic – Dark Bronze 695


232

7301 Decarie Blvd. Montreal Q.C. Canada

H4P 2G7 514-735-5410

www.kaba-ilco.com

Certified Mortise Locks & Latches BHMA / ANSI A156.13 2005

Series 1000 Certified for Compliance to A156.13 Grade 1

ANSI Licensee’s Catalog Function Function Name Description F01 Passage Latch 71x series F04 Entry Lock 71x series F08 Front Door Lock 71x series F10 Apartment Door Lock 71x series F15 Hotel Guest Room Lock 71x series F20 Corridor Door Lock 71x series F21 Room Door Lock 71x series F01 Passage Latch 76x series F04 Entry Lock 76x series F08 Front Door Lock 76x series F10 Apartment Door Lock 76x series F15 Hotel Guest Room Lock 76x series F20 Corridor Door Lock 76x series F21 Room Door Lock 76x series F01 Passage Latch 77x series F04 Entry Lock 77x series F08 Front Door Lock 77x series F10 Apartment Door Lock 77x series F15 Hotel Guest Room Lock 77x series F20 Corridor Door Lock 77x series F21 Room Door Lock 77x series F01 Passage Latch 79x series F04 Entry Lock 79x series F08 Front Door Lock 79x series F10 Apartment Door Lock 79x series F15 Hotel Guest Room Lock 79x series F20 Corridor Door Lock 79x series F21 Room Door Lock 79x series


233

Kaba Ilco Inc. (continued) BHMA/ANSI A156.13-2005 Note: 76x series, 77x series, 79x series with ASM mortise 71x series with AMM mortise (x represents any alphanumeric character in all above lock names)

CERTIFIED FINISHES Finish Type Licensee’s Symbol(s) Satin chromium plated over nickel 626 E (26D)


234

MARKS USA 5300 NEW HORIZONS BLVD.

AMITYVILLE, N.Y. 11701 (631) 225-5400


ANSI/BHMA A156.13-2005, SERIES 1000 - MORTISE ANSI Function numbers Licensee’s Catalog Designations CERTIFIED FOR OPERATIONAL GRADES: GRADE 1 F01 5BA-N thru 5WV-N F02 5BA-L thru 5WV-L F04 5BA-E thru 5WV-E F05 5BA-J thru 5WV-J F06 5BA-JM thru 5WV-JM F07 5BA-EW thru 5WV-EW F08 5BA-A thru 5WV-A F09 5BA-G thru 5WV-G F10 5BA-A thru 5WV-A F11 5BA-FC thru 5WV-FC F12 5BA-F thru 5WV-F F13 5BA-FW thru 5WV-FW F14 5BA-C thru 5WV-C F15 5BA-H thru 5WV-H F16 5T F17 5P F18 5S F19 5BA-LF thru 5WV-LF F20 5BA-FD thru 5WV-FD F21 5BA-B thru 5WV-B F22 5BA-LJ thru 5WV-LJ F26 5BA-GL thru 5WV-GL F29 5SC F30 5BA-WW thru 5WV-WW F31 5BA-EX thru 5WV-EX F32 5BA-GC thru 5WV-GC F33 5BA-FX thru 5WV-FX F34 5BA-FC thru 5WV-FC F35 5BA-AC thru 5WV-AC


235

MARKS USA (continued)

CERTIFIED LOCKS AND LATCHES ANSI/BHMA A156.13-2005, SERIES 1000 MORTISE

ANSI Function numbers Licensee’s Catalog Designations CERTIFIED FOR SECURITY GRADES: GRADE 1 F04 5BA-E thru 5WV-E F05 5BA-J thru 5WV-J F06 5BA-JM thru 5WV-JM F07 5BA-EW thru 5WV-EW F08 5BA-A thru 5WV-A F09 5BA-G thru 5WV-G F10 5BA-A thru 5WV-A F11 5BA-FC thru 5WV-FC F12 5BA-F thru 5WV-F F13 5BA-FW thru 5WV-FW F14 5BA-C thru 5WV-C F15 5BA-H thru 5WV-H F16 5T F17 5P F18 5S F20 5BA-FD thru 5WV-FD F21 5BA-B thru 5WV-B F26 5BA-GL thru 5WV-GL F29 5SC F30 5BA-WW thru 5WV-WW F32 5BA-GC thru 5WV-GC F33 5BA-FX thru 5WV-FX F34 5BA-FC thru 5WV-FC F35 5BA-AC thru 5WV-AC


236

CERTIFIED FINISHES Finish Type BHMA Code Licensee’s Symbol Brass with a Clear Organic Coating 605 US3, “ Appearance equivalent 605E US3E Satin Brass, clear coated 606 US4 “ Appearance equivalent 606E US4 Bronze with a Clear Organic Coating 612 US10 “ Appearance equivalent 612E US10 Oxidized satin Bronze Appearance equivalent 613E US10B Satin Nickel-plated 619 US15 “ Appearance equivalent 619E US15 Bright Chrome over Brass or Bronze 625 US26 “ Appearance equivalent 625E US26 Satin Chrome over Brass or Bronze 626 US26D “ Appearance equivalent 626E US26D Stainless Steel 300 Series 629, 630 US32, US32D Inorganic coating over Brass 605E US3E Inorganic coating over Zinc 605E US3E


237

2232 Northmont Parkway, Suite 100, Duluth GA 30096 USA Phone 1-770497-3949. Toll Free 1-800-424-1433 [email protected] www.onity.com


ANSI/BHMA 156.13, 2005

Mortise Locks & Latches, Series 1000

Certified for Operational Grade 1 & Security Grade 1.

ANSI Function Number Licensee’s Catalog Description F01 HT24/HT28 F04 HT24/HT28 F08 HT24/HT28 F10 HT24/HT28 F15 HT24/HT28 F21 HT24/HT28

CERTIFIED FINISHES

Code Description Base Material Category US Equivalent 626 Satin Chrome over Nickel Brass A US26D 682 Satin Chrome over Nickel Zinc Alloy 626E US26D 652 Satin Chrome over Nickel Steel 626E US26D 606 Satin Brass Brass A US4 678 Satin Brass Zinc Alloy 606E US4 633 Satin Brass Steel 606E US4 619 Satin Nickel Brass A US15 619E Satin Nickel Zinc Alloy N/A US15 646 Satin Nickel Steel 619E US15 625 Bright Chrome Brass A US26 681 Bright Chrome Zinc Alloy 625E US26 651 Bright Chrome Steel 625E US26 605 Bright Brass Brass A US3 677 Bright Brass Zinc Alloy 605E US3 632 Bright Brass Steel 605E US3 609 Satin Brass Blackened Brass C US5 609E Satin Brass Blackened Zinc Alloy C US5 638 Satin Brass Blackened Steel 609E US5


238



ANSI/BHMA 156.13, 2005

Mortise Locks & Latches, Series 1000 Certified for Operational Grade 1 & Security Grade 1.

ANSI Function Number Licensee’s Catalog Description

F01 HT ADVANCE F04 HT ADVANCE F08 HT ADVANCE F10 HT ADVANCE F15 HT ADVANCE F21 HT ADVANCE

CERTIFIED FINISHES



239



ANSI/BHMA 156.13, 2005

Mortise Locks & Latches, Series 1000 Certified for Operational Grade 1 & Security Grade 1.


F01 CT SERIES F04 CT SERIES F07 CTSERIES F08 CT SERIES F10 CT SERIES F12 CT SERIES F13 CT SERIES F15 CT SERIES F21 CT SERIES

CERTIFIED FINISHES



240

PDQ Manufacturing

PO Box 507 2754 Creek Hill Road

Leola, PA 17540 1-800-441-9692

www.pdqlocks.com


Series 1000 – Mortise


ANSI Function Number Grade 1 Operational and Grade 2 Security F01* MR126-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F02 MR178-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F04 MR116-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F05 MR148-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F07 MR115-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F08 MR117-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F09 MR186-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F10 MR154-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F11 MR158-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F12 MR162-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F13 MR136-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F14 MR137-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F16 MR133-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F17 MR132-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F18 MR131-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F19 MR179-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F21 MR135-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF F22* MR176-PFEF, BFEF, MFEF, PFSF, BFSF, MFSF *Security Grade does not apply due to lock function

CERTIFIED FINISHES Finish Type ANSI Designation Licensee’s Symbols Bright Brass 605 US3 Satin Brass 606 US4 Satin Bronze 612E (725) US10 Bright Chrome over Nickel 625 US26 Satin Chrome over Nickel 626 US26D


241

Computerized Security Systems, Inc. d.b.a. SAFLOK 31750 Sherman Ave. Madison Heights, MI 48071 Phone: 248.837-3700 Fax: 248.583.3228 Email: [email protected] Web: www.saflok.com

CERTIFIED LOCKS AND LATCHES BHMA/ANSI A156.13-2005 Mortise Locks and Latches Series 1000

Certified for both Operational and Security Grade 1:

ANSI Function Function Name

Licensee’s Catalog Description

F01 Passage Latch SAFLOK MT F04 Entry Lock SAFLOK MT F05 Classroom Lock SAFLOK MT F08 Front Door Lock SAFLOK MT F10 Apartment Door Lock SAFLOK MT F15 Hotel Guest Room Lock SAFLOK MT F20 Corridor Door Lock SAFLOK MT F21 Room Door Lock SAFLOK MT F27 Automatic Dead Bolt SAFLOK MT F28 Automatic Dead Bolt SAFLOK MT F01 Passage Latch Odyssey F04 Entry Lock Odyssey F05 Classroom Lock Odyssey F08 Front Door Lock Odyssey F10 Apartment Door Lock Odyssey F15 Hotel Guest Room Lock Odyssey F20 Corridor Door Lock Odyssey F21 Room Door Lock Odyssey F27 Automatic Dead Bolt Odyssey F28 Automatic Dead Bolt Odyssey


242

Computerized Security Systems (continued)

BHMA/ANSI A156.13-2005

ANSI Function Function Name

Licensee’s Catalog Description

F01 Passage Latch Quantum MT F04 Entry Lock Quantum MT F05 Classroom Lock Quantum MT F08 Front Door Lock Quantum MT F10 Apartment Door Lock Quantum MT F15 Hotel Guest Room Lock Quantum MT F20 Corridor Door Lock Quantum MT F21 Room Door Lock Quantum MT F27 Automatic Dead Bolt Quantum MT F28 Automatic Dead Bolt Quantum MT F01 Passage Latch Quantum RFID F04 Entry Lock Quantum RFID F05 Classroom Lock Quantum RFID F08 Front Door Lock Quantum RFID F10 Apartment Door Lock Quantum RFID F15 Hotel Guest Room Lock Quantum RFID F20 Corridor Door Lock Quantum RFID F21 Room Door Lock Quantum RFID F27 Automatic Dead Bolt Quantum RFID F28 Automatic Dead Bolt Quantum RFID


243


NEW HAVEN, CT 06511 203/562-2151


A156.13 2002

Series 1000-Mortise

ANSI Function Numbers Licensee’s Catalog Designations CERTIFIED FOR OPERATIONAL GRADES: Grade 1 F01 9215, 8215, 7815, 7915 F04 9205, 8205, 7805 F05 9237, 8237, 7837, 7937 F07 9204, 8204, 7804, 7904 F09 9216, 8216, 7816, 7916 F12 9245, 8245, 7845, 7945 F13 9225, 8225, 7825, 7925 F14 9226, 8226, 7826, 7926 F15 9250, 8250, 7850, 7950 F19 9266, 8266, 7866, 7966 F20 9243, 8243, 7843, 7943 F21 9224, 8224, 7824, 7924 F22 9265, 8265, 7865, 7965 F32 9238, 8238, 7838, 7938 F33 9239, 8239, 7839 F34 9241, 8241, 7841 CERTIFIED FOR SECURITY GRADES: Grade 1 F04 9205, 8205, 7805 F05 9237, 8237, 7837, 7937 F07 9204, 8204, 7804, 7904 F09 9216, 8216, 7816, 7916 F32 9238, 8238, 7838, 7938 F33 9239, 8239, 7839 F34 9241, 8241, 7841


244

SARGENT MANUFACTURING COMPANY (Continued)

Series 1000 Mortise

CERTIFIED FOR SECURITY GRADES: Grade 1 F12 9245, 8245, 7845, 7945 F13 9225, 8225, 7825, 7925 F14 9226, 8226, 7826, 7926 F15 9250, 8250, 7850, 7950 F19 9266, 8266, 7866, 7966 F20 9243, 8243, 7843, 7943 F21 9224, 8224, 7824, 7924

CERTIFIED FINISHES Finish Type Licensee’s Symbols Brass with a Clear Organic Coating US 3, US 4 Bronze with a Clear Organic Coating US 9, US 10, US 10BL Bright Nickel Plated Clear Coated US 14 Dull Nickel Plated Clear Coated US 15 Chrome over Brass, Bronze, Zinc US 26, US 26D Stainless Steel 300 Series US 32, US 32D Oxidized Satin Bronze, Oil Rubbed US 10B Statutory Dark Bronze, Lacquered US 20D


245



(719) 390-5071


Series 1000 – MORTISE ANSI Function


Numbers CERTIFIED FOR OPERATIONAL GRADES: Grade 1 F01 L9010 F04 L9050, LV9050 F05 L9070, LV9070 F06 L9076, LV9076 F07 L9080, LV9080 F08 CL5591, CM5591 F09 L9060, LV9060 F10 CL5591, CM5591 F13 L9456, LV9456 F14 CL5594, CM5594, L9466 F15 L9486, LV9486 F16 CL5591, CL5594, CM5591, CM5594, L9462 F17 L9460 F18 CL5594, CM5594, L9464 F19 LV9440 F20 CM5597, L9453, LV9453 F21 CL5591, CM5591, L9473 F22 CL5593, CM5593, L9040, LV9040 F23 CL5591, CM5591 F26 CL5593, CM5593 F28 CL5591, CL5593, CL5594, CM5591, CM5593,

CM5594, CM5597, CM5599

F30 LV9082 F33 CM5599


246

SCHLAGE IR Security Technologies (Continued) ANSI Function


Numbers CERTIFIED FOR SECURITY GRADES: Grade 1 Grade 2 Grade 3 F04 L9050, LV9050 L9050R, LV9050R L9050GD, LV9050GD F05 L9070, LV9070 L9070R, LV9070R L9070GD, LV9070GD F06 L9076, LV9076 L9076R, LV9076R L9076GD, LV9076GD F07 L9080, LV9080 L9080R, LV9080R L9080GD, LV9080GD F08 CL5591, CM5591 F09 L9060, LV9060 L9060R, LV9060R L9060GD, LV9060GD F10 CL5591, CM5591 F13 L9456, LV9456 L9456R, LV9456R L9456GD, LV9456GD F14 CL5594, CM5594, L9466 L9466R L9466GD F15 L9486, LV9486 L9486R, LV9486R L9486GD, LV9486GD F16 CL5591, CL5594, CM5591,

CM5594, L9462 L9462R L9462GD

F17 L9460 L9460R L9460GD F18 CL5594, CM5594, L9464 L9464R L9464GD F19 LV9440 LV9440R LV9440GD F20 CM5597, L9453, LV9453 L9453R, LV9453R L9453GD, LV9453GD F21 CL5591, CM5591, L9473 L9473R L9473GD F22 CL5593, CM5593, LV9040 LV9040R LV9040GD F23 CL5591, CM5591 F26 CL5593, CM5593 F28 CL5591, CL5593, CL5594,

CM5591, CM5593, CM5594, CM5597, CM5599

F30 LV9082 LV9082R LV9082GD F33 CM5599



Brass with a Clear Organic Coating 605, 606 Bronze with a Clear Organic Coating 611,612 Dark Oxidized Satin Bronze, Oil Rubbed 613 Chrome over Brass or Bronze 625, 626 Stainless Steel 300 Series 629, 630


247

CERTIFIED MORTISE LOCKS & LATCHES BHMA / ANSI A156.13 2005

Series 1000 Certified for both Operational & Security Grade 1: ANSI Function Townsteel Catalog Designation F01 MSE-01, MSS-01, MSO-01, MSW-01, MDE-01, MVE-01, MVS-01 F04 MSE-04, MSS-04, MSO-04, MSW-04, MDE-04, MVE-04, MVS-04 F05 MSE-05, MSS-05, MSO-05, MSW-05, MDE-05, MVE-05, MVS-05 F07 MSE-07, MSS-07, MSO-07, MSW-07, MDE-07, MVE-07, MVS-07 F13 MSE-13, MSS-13, MSO-13, MSW-13, MDE-13, MVE-13, MVS-13 F14 MSE-14, MSS-14, MSO-14, MSW-14, MDE-14, MVE-14, MVS-14 F15 MSE-15, MSS-15, MSO-15, MSW-15, MDE-15, MVE-15, MVS-15 F16 MSE-16, MSS-16, MSO-16, MSW-16, MDE-16, MVE-16, MVS-16 F17 MSE-17, MSS-17, MSO-17, MSW-17, MDE-17, MVE-17, MVS-17 F18 MSE-18, MSS-18, MSO-18, MSW-18, MDE-18, MVE-18, MVS-18 F19 MSE-19, MSS-19, MSO-19, MSW-19, MDE-19, MVE-19, MVS-19 F20 MSE-20, MSS-20, MSO-20, MSW-20, MDE-20, MVE-20, MVS-20 F30 MSE-30, MSS-30, MSO-30, MSW-30, MDE-30, MVE-30, MVS-30 F32 MSE-32, MSS-32, MSO-32, MSW-32, MDE-32, MVE-32, MVS-32 F33 MSE-33, MSS-33, MSO-33, MSW-33, MDE-33, MVE-33, MVS-33 Certified Finishes: Finish Type Licensee’s Symbol Bright Brass, clear coated 605 Satin Brass, clear coated 606 Bright Chrome 625 Satin Chrome 626 Bright Stainless Steel 629 Satin Stainless Steel 630 Satin Bronze 612 Dark Oxidized Satin Bronze, Oil rubbed 613


248


(704) 283-2101

CERTIFIED LOCKS & LATCHES ANSI A156.13 – 2002

CERTIFIED FOR OPERATIONAL GRADES (with or without “FL” suffix ): GRADE 1 ANSI Function Number Licensee’s Catalog Number F01 8801, YMM101 F02 8802 F04 8807, YMM107 F05 8808, YMM108 F07 8805, YMM105 F08 8867 F09 8817-2, YMM117-2 F10 8867 F12 8867, 8847 F13 8822, YMM122 F14 8860-2, YMM160-2 F15 8820 F16 8814-2 F17 8815 F18 8814 F19 8802, YMM102 F20 8847, YMM147 F21 8860, YMM160 F22 8862, YMM162 F30 8830-2 F31 8828, YMM128 F32 8808-2, YMM108-2 F33 8811-2 F34 8812-2, YMM112-2 CERTIFIED FOR SECURITY GRADE 1: SL8800 Series with lever handle trim (with “FL” suffix ) F04 8807 F05 8808 F07 8805 F09 8817-2 F10 8867 F12 8867


249

YALE COMMERCIAL LOCKS & HARDWARE – A156.13 (continued) F13 8822 F15 8820 F19 8802 F20 8847 F30 8830-2 F34 8812-2

CERTIFIED FINISHES


Bright brass, clear coated 605 Bright brass, PVD 605E Satin brass, clear coated 606 Satin brass, PVD 606E Satin brass, blackened, satin relieved, clear coated 609 Bright bronze, clear coated 611 Satin bronze, clear coated 612 Satin bronze, oxidized and oil rubbed 613 Satin bronze, oxidized, PVD 613E Satin bonze, blackened, satin relieved, clear coated 616 Satin nickel plated, clear coated 619 Bright chrome plated 625 Satin chrome plated 626 Bright stainless steel 629 Satin stainless steel 630

Closers Holders Release

Devices

ANSI/BHMA A156.15

2009 DIRECTORY

Closers H

olders R

elease Devices


251

GENERAL INFORMATION EXPLANATION OF IDENTIFYING NUMBERS First letter denotes BHMA Product Section (C). First numeral indicates material used: 0 Optional Material Second numeral identifies the type of product: 0 Closer Holder Release Devices Third and fourth numerals are product type and function numbers: 01 through 10 are reserved for electromagnetic or electromechanical door holders 11 through 30 are reserved for products surfacemounted on the door 31 through 60 are reserved for jambmounted products 61 through 80 are reserved for concealed mounted products Fifth numeral designates the grade classification of the item: 1 Grade 1 Example of identifying number: C00111

C Section (C) 0 Material (optional) 0 Type of Product (Closer Holder Release Devices) 11 Surfacemounted on door Hinge side Double lever arm 1 Grade (Grade 1)


252



CERTIFIED CLOSER HOLD RELEASE DEVICES

A156.15 2006 ANSI Type No. Sec. 4 Options Certified Certified Licensee’s Series Designations C00011 - EM-504 24120 EM-505 24120 EM-508 24120 EM-509 24120 C00021 - EM-501 24120 C00031 - EM-502 24120 C00191 D, N TS93-1/TS93-5, 8916/8956, 8656 EMF/T C00201 D, L, N TS93-1/TS93-5, 8916/8956, 8656 EMR/T C00231 D, N TS93-1/TS93-5, 8916/8956, 8656 EMF/PT C00241 D, L, N TS93-1/TS93-5, 8916/8956, 8656 EMR/PT C00311 D, N, R 1816/1856 HJ C00321 D, L, N, R 1816/1856 HJ SD C00331 D, K, N 1816/1856 FSJ C00341 D, K, L, N 1816/1856 FSJ C00351 D, M, N, R 1856 HT C00361 D, L, M, N, R 1856 HT SD C00371 D, K, M, N 1856 FST SD


253


ANSI Type No. Sec. 4 Options Certified Certified Licensee’s Series Designations C00381 D, K, L, M, N 1856 FST SD C00391 D, N TS93-1/TS93-5, 8916/8956, 8656 EMF/TDE C00401 D, L, N TS93-1/TS93-5, 8916/8956, 8656 EMR/TDE C00711 D BTS80EMB/C/C-E/C-F/D/E/F/I/IF/L/L-E/L-F C00751 D BTS80EMB/G/H C00771 D BTS80EMB/C/C-E/C-F/D/E/F/L/L-E/L-F

CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol(s)

Aluminum Painted (689) 689


















254


Princeton, IL. 61356 815/875-3311

CERTIFIED DOOR CLOSERS A156.15 – 2006

ANSI Type No. Certified PT 4 Options Certified Licensee’s Series Designations C00191 D, N, P, R 4040SE, 4040SEL C00231 D, N, P, R 4040SE, 4040SEL

C00311 D, N, K, P D, N, K

4410ME 4410HSA

C00351 D, N, K, P D, N, K

4310ME 4310HSA

C00371 D, N, K, P 4310ME SF

C00391 D, N, K, P D, N, K

4310ME DE 4310HSA DE

C00471 P, R 4040SEH C00511 P, R 4040SEH C00611 D, P, R 3130SE, 3130SEL C00651 D, N, K, P 2310ME C00011 ------------- 7830SEM, 7840SEM, & 7850SEM C00021 ------------- 7820SEM

CERTIFIED FINISHES

BHMA Certified finishes available on LCN Certified Closer Holder Release Devices. Finish Types (ANSI/BHMA Designations)

Certified Finish Description Base Metal

BHMA Type No. Licensee’s Symbol

Brass Paint Any (696) Satin Brass Powder Coat Dark Bronze Paint Any (695) Dark Bronze Powder Coat Black Paint Any (693) Black Powder Coat Tan Paint Any (692) Tan Powder Coat Light Bronze Paint Any (691) Light Bronze Powder Coat Statuary Bronze Paint Any (690) Statuary Bronze Powder Coat Aluminum Paint Any (689) Aluminum Powder Coat Bright Brass plated, clear coated Steel (632) US3 Satin Brass plated, clear coated Brass (633) US4 Bright Bronze plated, clear coated Steel (637) US9 Satin Bronze plated, clear coated Steel (639) US10 Satin Nickel, clear coated Any (646) US15 Bright Chrome plated Steel (651) US26 Satin Chrome plated Steel (652) US26D


255

NORTON DOOR CONTROLS 1902 AIRPORT ROAD MONROE, NC 28110

(704) 283-2101

CERTIFIED CLOSER HOLDER RELEASE DEVICES ANSI/BHMA A156.15 - 2001

ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C00191 D, M, N, R 7700PT, 7700PTS

C00201 D, L, M, N, R 7700PTD

C00231 D, M, N, R P7700PT, P7700PTS

C00241 D, L, M, N, R P7700PTD

C00311 D, K, N 7220MP, 7220MPS, 7230MP, 7230MPS

C00321 D, K, L, N 7220MPD, 7230MPD

C00351 D, K, M, N 7210MP, 7210MPS

C00361 D, K, L, M, N 7210MPD

C00371 D, K, M, N 7240MP, 7240MPS

C00381 D, K, L, M, N 7240MPD

C00391 D, K, M, N 7250MP, 7250MPS

C00401 D, K, L, M, N 7250MPD

C00651 D, K, M, N 7290MP

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designations) Licensee’s Symbol Designations Primed for Painting 600

Aluminum Painted 689

Dark Statuary Bronze Painted 690

Dull Bronze Painted 691

Black Painted 693

Medium Amber Painted 694

Gold Painted 696


256

RIXSON SPECIALTY DOOR CONTROLS 1902 AIRPORT ROAD MONROE, NC 28110

(704) 283-2101


ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C00011 990, 991, 996, 997, 998, 999

C00021 980

C00031 981

C00041 972H, 972S, 972U, 973H, 973S, 973U

C00311 D, N, K 4 PUSH

C00321 D, L, N, K 6 PUSH

C00351 D, N, K 4 PULL

C00361 D, L, N, K 6 PULL

C00371 D, N, K FS 4 PULL

C00381 D, L, N, K FS 6 PULL

C00391 D, N, K DE 4 PULL

C00401 D, L, N, K DE 6 PULL

C00471 99-926

C00481 99-826

C00511 99-726

C00521 99-626

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designations) Licensee’s Symbol Designations




Gold Painted 696


257


NEW HAVEN, CT 06511 203/562-2151

CERTIFIED HOLDER CLOSER RELEASE DEVICES

A156.15 2001

Modern Type with Cover

ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C00011 1560, 1561 C00021 1562 C00031 1563 C00191 D, R, M, N, P 2467, 9-2467, 2477, 9-2477 C00191 D, R, N, P 351-EHT, 351D-EHT C00191 D, R, N, P 2468, 9-2468, 2478, 9-2478 C00201 D, R, L, M, N, P 12-2467, 12-2477 C00201 D, R, L, N, P 12-2468, 12-2478 C00231 D, R, M, N, P 2497, 9-2497 C00231 D, R, N, P 351-EHT, 351D-EHT C00231 D, R, N, P 2498, 9-2498 C00241 D, R, L, M, N, P 12-2497 C00241 D, R, L, N, P 12-2498 C00311 D, K, L 2990, 9-2990 C00321 D, K, L, N 12-2290 C00351 D, K, N 2960, 9-2960 C00361 D, K, L, N 12-2960 C00371 D, K, N 2980, 9-2980 C00381 D, K, L, N 12-2980 C00391 D, K, N 2970, 9-2970 C00391 D, R, N, P 351-EHTD, 351D-EHTD C00401 D, K, L. N 12-2970


258

YALE SECURITY, INC. 1902 AIRPORT ROAD MONROE, NC 28110

(704) 283-2101


ANSI Type No. PT 4 Options Licensee’s Series Designations Certified Certified C00191 D, M, N, R 400PT, 400PTS, 400PT, 400PTS

C00201 D, L, M, N, R 400PTD

C00231 D, M, N, R P400PT, P400PTS

C00241 D, L, M, N, R P400PTD

C00311 D, K, N 4220MP, 4220MPS, 4230MP, 4230MPS

C00321 D, K, L, N 4220MPD, 4230MPD

C00351 D, K, M, N 4210MP, 4210MPS

C00361 D, K, L, M, N 4210MPD

C00371 D, K, M, N 4240MP, 4240MPS

C00381 D, K, L, M, N 4240MPD

C00391 D, K, M, N 4250MP, 4250MPS

C00401 D, K, L, M, N 4250MPD

C00651 D, K, M, N 4290MP

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designations) Licensee’s Symbol Designation

Primed for Painting 600




Black Painted 693

Medium Amber Painted 694

Gold Painted 696

Self Closing Hinges & Pivots

ANSI/BHMA A156.17

2009 DIRECTORY

Self Closing

Hinges &

Pivots


260

GENERAL INFORMATION EXPLANATION OF TYPE NUMBERS (A156.17) First letter denotes BHMA Product Section (K). First numeral indicates material used: 1 - Cast, Forged or Extruded Brass or Bronze 2 - Wrought Brass or Bronze 5 - Stainless Steel 6 - Malleable Iron 8 - Wrought Steel Second numeral identifies the type of product: 1 - Spring Hinge 2 - Gravity or Spring Hinge Pivot 3 - Gate Spring Pivot Hinge 4 - Screen Door Hinge 7 - Miscellaneous Items Third and fourth numerals are nonsignificant and are used to make each type number different. The fifth numeral designates the grade classification of the product: 1 - Grade 1 2 - Grade 2 3 - Grade 3 4 - Grade 4 (no tests are required) Example of identifying number: K81081 K - Section K 8 - Material (wrought steel) 1 - Type of product (spring hinge) 08 - nonsignificant and are used to make each type number different. 1 - Grade 1 (Grade determinations are made on the basis of the required performance test levels.) The suffix letter F, where used in the identification number, indicates the hinge is listed for use on fire doors. As shown in the hinge descriptions on paragraph 7, only Grade 1 spring hinges are eligible for fire door listings.


261

Bommer Industries, Inc.

P.O. Box 187 19810 Asheville Highway

Landrum, South Carolina 29356 1-800-334-1654

www.bommer.com A156.17 2004 Self Closing Hinges & Pivots 7.1 Spring Hinge Single Acting ANSI Part # Hinge Type Bommer Part # Base Material

K81071F

3.5” / Full Mortise / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

LB4300 Series

Steel

K51071F


LB4300 Series

Stainless Steel

K81071F

4” / Full Mortise / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

LB4300 Series

Steel

K51071F

4” / Full Mortise / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

LB4300 Series

Stainless Steel

K81071F


LB4300 Series

Steel

K51071F


LB4300 Series

Stainless Steel

K81081F

4.5” / Half Surface / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

LB4300 Series

Steel

K51081F

4.5” / Half Surface / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

LB4300 Series

Stainless Steel

K81071F


4030 Series

Steel

K81011F

6” / Full Mortise Non-template / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

4040 Series

Steel

K81011F

7” / Full Mortise Non-template / Spring Hinge Single Acting / Grade 1 / Fire Rated / UL Listed R-4667

4040 Series

Steel


262


CAL-ROYAL PRODUCTS, INC. 6605 FLOTILLA STREET COMMERCE, CA 90040 TEL: (323) 888-6601 & (800) 876-9258 FAX: (323) 888-6699 &(800) 222-3316 Email: [email protected]

A156.17 2009 SPRING HINGES ANSI TYPE HINGE TYPE CAL-ROYAL PART # K81071 3 1/2 X 3 1/2 FULL MORTISE/ UL LISTED SH-35R (RC) ¼” RAD K81071 3 ½ X 3 ½ FULL MORTISE/ UL LISTED SH3558R (RC) 5/8 RAD K81071 3 ½ X 3 ½ FULL MORTISE/ UL LISTED SCSH35 K81071 4 X 4 FULL MORTISE/ UL LISTED SH44R (RC) ¼ RAD TEMPLATE K81071 4 X 4 FULL MORTISE/ UL LISTED SH4458R (RC) 5/8 RAD NON TP K81071 4 X 4 FULL MORTISE/ UL LISTED BENSH4458R (RC) 5/8 RAD BEN K81071 4 ½ X 4 FULL MORTISE/ UL LISTED SH454 K81071 4 ½ X 4 ½ FULL MORTISE/ UL LISTED SH140 NOTES: ALL HINGES ARE STEEL AND ANYTHING THAT IS ORDERED WITH 32D IS STAINLESS STEEL. ALL HINGES ARE ANSI TEMPLATES AND HINGE TESTING CONFORMS TO ANSI 156.1.



263


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.17 2004 Self Closing Hinges & Pivots 7.1 Spring Hinge (Single Acting) ANSI Part # Hinge Type Grade Hager Part # Base Material K51071F Full Mortise / Single Acting 1 1150 Stainless Steel K81071F Full Mortise / Single Acting 1 1250 Steel K81071F Full Mortise / Single Acting 1 1251 Steel K81071F Full Mortise / Single Acting 1 1252 Steel K81071F Full Mortise / Single Acting 1 1255 Steel K81071F Full Mortise / Single Acting 1 1256 Steel K81071F Full Mortise / Single Acting 1 1257 Steel K81071F Full Mortise / Single Acting 1 1258 Steel K81071F Full Mortise / Single Acting 1 1259 Steel K81081F Half Surface / Single Acting 1 1253 Steel

Power Assist & Low Energy

Power Operated Doors

ANSI/BHMA A156.19

2009 DIRECTORY

Power A

ssist & Low

Energy Pow

er O

perated Doors


265

GENERAL INFORMATION This standard does not utilize type or function numbers. Readers are encouraged to obtain copies of ANSI / BHMA A156.19 for complete information.


266



800-839-3157

POWER ASSIST & LOW ENERGY POWER OPERATED DOORS

ANSI/BHMA A156.19-2002 Series Designations 7800 Series


267



POWER ASSIST AND LOW ENERGY POWER OPERATED DOORS

A156.19 2007 All products listed below conform to Sections 3, 4, 5 (300,000 cycles) and 6.

Licensee’s Series Designations

ED800T ED800J

CERTIFIED FINISHES Finish Type (ANSI/BHMA Designations) Licensee’s Symbol(s)

Aluminum Painted (689) 689














Satin Nickel Plated, Clear Coated (646) 619E/US15




268

121 West Railroad Avenue Princeton, Il. 61356

1-800-526-2400

Power Assist and Low Energy Power Operators Doors A156.19-2002

All products listed below conform to Sections 3, 4, and 5 (300,000 cycles) Licensee's Series Designations Product Listing Standard Agency File/Listing 9100 Series Fire Engineering C.S. Fire Marshall 3266-0128: 102 Building Materials ANSI/UL 325 UL/CUL E32300 UL 228 & ANSI/UL 325 UL/CUL R7303 2800 Series ANSI/UL 325 UL/CUL E32300 9500 Series ANSI/UL 325 UL/CUL E32300 UL 228 & ANSI/UL UL/CUL R7303 9700M Series ANSI/UL UL/CUL E32300 UL 228 & ANSI/UL UL/CUL R 7303 2900M Series ANSI/UL UL/CUL E32300 7900/7980 Series ANSI/UL 325 UL/CUL R1943 Vol. 10 2610/4810/4820/ 4840 Series ANSI/UL 325 UL/CUL R1943 Vol. 11 4630/4640 Series ANSI/UL 325 UL/CUL R18222


269

NORTON DOOR CONTROLS 1902 AIRPORT ROAD MONROE, NC 28110

(704) 283-2101

POWER ASSIST & LOW ENERGY POWER OPERATED DOORS ANSI/BHMA A156.19 – 2002

Licensee’s Series Designations 6900 Series 5700 Series


270


NEW HAVEN, CT 06511 203/562-2151

POWER ASSIST & LOW ENERGY POWER OPERATED DOORS


4000 SERIES 3000 SERIES

CERTIFIED FINISHES

Finish Type (ANSI/BHMA Designation) Licensee’s Symbol Aluminum Painted (689) EN Statuary Bronze Painted (690) EB Gold Painted (696) EAB


271

STANLEY ACCESS TECHNOLOGIES 65 Scott Swamp Road

Farmington, CT 06032 860-677-6861

www.stanleyaccesstechnologies.com

POWER ASSIST AND LOW ENERGY POWER OPERATED DOORS


Licensee’s Series Designations:

MAGIC-FORCE™

Applicable Sections of ANSI/BHMA A156.19-2002 include: 1, 2.1, 4, 5, 6.1, and 6.3.

Thresholds

ANSI/BHMA A156.21

2009 DIRECTORY

Thresholds


273

GENERAL INFORMATION EXPLANATION OF THRESHOLD NUMBERING SYSTEM (A156.21) The first character denotes the BHMA organizational Section (J), Architectural Door Trim, Thresholds and Door Gasketing. The second character indicates the general type of material used: 1 – Architectural Extruded Brass or Bronze 3 – Aluminum 5 – Stainless Steel The third character identifies the configuration type of the threshold: 1 Compressing Top 6 Rabbeted, Latching/Panic with Gasket 2 Flat Saddle 7 Plate 3 Half Saddle 8 Ramped 4 Interlocking 9 Saddle for Floor Closer 5 Rabbeted, Latching/Panic 0 None Designated The fourth character indicates the surface type of the threshold: 1 Fluted Surface 2 Fluted Surface with Abrasive Material 3 Smooth Surface 4 Smooth Surface with Abrasive Material The fifth character designates a further description of the type of threshold: 1 Applied Stop 6 Expansion Assembly 2 Applied Stop with Gasket 7 Hook Strip Applied to Door 3 Barrier Free (See 3.6) 8 Offset 4 Carpet Separator 9 Thermal Barrier 5 Ends Mitered 0 None Designated The sixth character also designates a further description of the type of threshold. It is used when more than one description identified by the fourth numeral is needed: 1 Applied Stop 6 Expansion Assembly 2 Applied Stop with Gasket 7 Hook Strip Applied to Door 3 Barrier Free (See 3.6) 8 Offset 4 Carpet Separator 9 Thermal Barrier 5 Ends Mitered 0 None Designated Example: J34170 J - BHMA Section J 3 - Material (Aluminum) 4 - Configuration Type (Interlocking Threshold) 1 - Surface Type (Fluted) 7 - Further Description (Hook Strip Applied to Door) 0 - Further Description (None Designated)


274

Hager Companies

139 Victor Street, P.O. Box 12300 St. Louis, MO 63104

1-800-255-3590 www.hagerco.com

A156.21 - 2006 Thresholds

5.4.2 Saddle Thresholds

ANSI Part # Base Material Hager Part #

Fluted Surface Thresholds J32100 Aluminum 414S

Fluted Surface Abrasive Thresholds J32200 Aluminum 414S

Fluted Surface Barrier Free Thresholds J32130 Aluminum 401S, 403S, 404S, 410S, 412S, 413S, 415S, 416S, 417S, 426S, 428S, 430S

J12130 Brass 403SMIB, 404SMIB, 410SMIB, 412SMIB, 413SMIB, 415SMIB, 416SMIB, 417SMIB

Fluted Surface Abrasive Barrier Free Thresholds J32230 Aluminum 401S, 403S, 404S, 412S, 413S, 415S, 416S, 417S, 426S, 428S, 430S

J12230 Brass 403SMIB, 404SMIB, 410SMIB, 412SMIB, 413SMIB, 415SMIB, 416SMIB, 417SMIB

Smooth Surface Barrier Free Thresholds J32330 Aluminum 418S J12330 Brass 418SMIB

Smooth Surface Abrasive Barrier Free Thresholds J32430 Aluminum 418S J12430 Brass 418SMIB

Fluted Surface Thermal Barrier Thresholds J32190 Aluminum 422S

Fluted Surface Offset Thresholds J32180 Aluminum 438S


275

Hager Companies (Continued) A156.21 2006 Thresholds ANSI Part # Base Material Hager Part #

Fluted Surface Barrier Free Carpet Divider Thresholds J32143 Aluminum 505S, 506S

Fluted Surface Abrasive Barrier Free Carpet Divider Thresholds J32243 Aluminum 505S, 506S 5.4.3 Half Saddle Threshold

Fluted Surface Barrier Free Thresholds

J33130 Aluminum 431S, 432S, 433S J13130 Brass 432SMIB

Fluted Surface Abrasive Barrier Free Thresholds

J33230 Aluminum 431S, 432S, 433S J13230 Brass 432SMIB 5.4.4 Interlocking Thresholds

Smooth Surface Thresholds J34370 Aluminum 599S

Smooth Surface Abrasive Thresholds J34470 Aluminum 599S

5.4.5 Rabbeted Thresholds with Gasket

Fluted Surface Bumper Thresholds J36100 Aluminum 435S, 477S

Fluted Surface Abrasive Bumper Thresholds J36200 Aluminum 435S 5.4.6 Latching Panic Thresholds with Gasket

Fluted Surface Thresholds J36100 Aluminum 532S, 541S, 552S, 575S, 580S J16100 Brass 541SMIB Fluted Surface Abrasive Thresholds J36200 Aluminum 532S, 541S, 552S, 575S, 580S J16200 Brass 541SMIB

Smooth Surface Thresholds J36300 Aluminum 560S, 565S

Smooth Surface Abrasive Thresholds J36400 Aluminum 560S, 565S


276

Hager Companies (Continued) A156.21 2006 Thresholds

ANSI Part # Base Material Hager Part #

Fluted Surface Barrier Free Thresholds J36130 Aluminum 520S J16130 Brass 520SMIB

Fluted Surface Abrasive Barrier Free Thresholds J36230 Aluminum 520S J16230 Brass 520SMIB 5.4.7 Plate Thresholds

Fluted Surface Barrier Free Thresholds J37130 Aluminum 440S, 445S, 450S, 455S, 460S, 465S

Fluted Surface Abrasive Barrier Free Thresholds J37230 Aluminum 440S, 445S, 450S, 455S, 460S, 465S

Smooth Surface Barrier Free Thresholds J37330 Aluminum 676S, 677S

Smooth Surface Abrasive Barrier Free Thresholds J37430 Aluminum 676S, 677S 5.4.8 Ramped Thresholds

Fluted Surface Barrier Free Thresholds J38100 Aluminum 442S

Fluted Surface Abrasive Barrier Free Thresholds J38200 Aluminum 442S 5.4.9 Saddle Thresholds for Floor Closers

Fluted Surface Barrier Free Thresholds J39130 Aluminum 651S, 652S

Fluted Surface Abrasive Barrier Free Thresholds J39230 Aluminum 651S, 652S

Fluted Surface Barrier Free Mitered Thresholds J39153 Aluminum 653S, 654S, 655S

Fluted Surface Abrasive Barrier Free Mitered Thresholds J39253 Aluminum 653S, 654S, 655S


277

National Guard Products 4985 East Raines Road Memphis, TN 38118

(800) 647-7874 www.ngp.com

CERTIFIED THRESHOLDS ANSI/BHMA A156.21 – 2009

ANSI # Material NGP Product # 5.4.1 Compressing Top Thresholds J31100 Aluminum 405, 406, 4065 5.4.2 Saddle Thresholds Fluted Surface Thresholds J32100 Aluminum 111, 211, 413, 424E, 425E, 425HD, 426E, 427E, 428E, 429E,

430E, 513, 513HD, 613, 713, 813, 913, 1013 J12100 Brass: 413BR, 424BR, 425BR, 426BR, 427BR, 428BR, 430BR,

513BR, 613BR, 713BR, 813BR

Fluted Surface Abrasive Thresholds J32200 Aluminum 111SIA, 211SIA, 413SIA, 424ESIA, 425ESIA, 425HDSIA,

426ESIA, 427ESIA, 428ESIA, 429ESIA, 430ESIA, 513SIA, 613SIA, 713SIA, 813SIA, 913SIA, 1013SIA

J12200 Brass 413BRSIA, 424BRSIA, 425BRSIA, 426BRSIA, 427BRSIA, 428BRSIA, 430BRSIA, 513BRSIA, 613BRSIA, 713BRSIA, 813BRSIA

J32200 Cast Alum. 4413, 4424, 4425, 4513 J02200 Safety Tread 3504, 3510 Fluted Surface Barrier Free Thresholds J32130 Aluminum 111, 211, 413, 424E, 425E, 425HD, 426E, 427E, 428E, 429E,

430E, 513, 613, 713, 813, 913, 1013 J12130 Brass 413BR, 424BR, 425BR, 426BR, 427BR, 428BR, 430BR,

513BR, 613BR, 713BR, 813BR Fluted Surface Abrasive Barrier Free Thresholds J32230 Aluminum 111SIA, 211SIA, 413SIA, 424ESIA, 425ESIA, 425HDSIA,

426ESIA, 427ESIA, 428ESIA, 429ESIA, 430ESIA, 513SIA, 613SIA, 713SIA, 813SIA, 913SIA, 1013SIA

J12230 Brass 413BRSIA, 424BRSIA, 425BRSIA, 426BRSIA, 427BRSIA, 428BRSIA, 430BRSIA, 513BRSIA, 613BRSIA, 713BRSIA, 813BRSIA

J32230 Cast Alum. 4413, 4424, 4425, 4513 J02230 Safety Tread 3504, 3510


278

National Guard Products (800) 647-7874 www.ngp.com

ANSI # Material NGP Product #

Smooth Surface Thresholds

J32300 Aluminum 408, 410, 411 J12300 Brass 411BR J52300 Stainless Steel 412SS, 413SS, 512SS, 513SS, 612SS, 613SS, 712SS, 713SS,

812SS, 813SS, 912SS, 913SS, 1012SS, 1013SS Smooth Surface Abrasive Thresholds J32400 Aluminum 408SIA, 410SIA, 411SIA J12400 Brass 411BRSIA J52400 Stainless Steel 412SSSIA, 413SSSIA, 512SSSIA, 513SSSIA, 612SSSIA, 613SSSIA, 712SSSIA, 713SSSIA, 812SSSIA, 813SSSIA, 912SSSIA, 913SSSIA, 1012SSSIA, 1013SSSIA Smooth Surface Barrier Free Thresholds J32330 Aluminum 408, 410, 411 J12330 Brass 411BR J52330 Stainless Steel 412SS, 413SS, 512SS, 513SS, 612SS, 613SS, 712SS, 713SS,

812SS, 813SS, 912SS, 913SS, 1012SS, 1013SS Smooth Surface Abrasive Barrier Free Thresholds J32430 Aluminum 408SIA, 410SIA, 411SIA J12430 Brass 411BRSIA J52430 Stainless Steel 412SSSIA, 413SSSIA, 512SSSIA, 513SSSIA, 612SSSIA, 613SSSIA, 712SSSIA, 713SSSIA, 812SSSIA, 813SSSIA, 912SSSIA, 913SSSIA, 1012SSSIA, 1013SSSIA

Fluted Surface Offset Thresholds

J32180 Aluminum 653, 655, 656, 659

Fluted Surface Abrasive Offset Thresholds J32280 Aluminum 653SIA, 655SIA, 656SIA, 659SIA

Fluted Surface Barrier Free Offset Thresholds J32138 Aluminum 653, 659

Fluted Surface Abrasive Barrier Free Offset Thresholds J32238 Aluminum 653SIA, 659SIA

Fluted Surface Thermal Barrier Thresholds J32190 Aluminum 8424, 8425, 8426, 8427, 8428, 8429, 8430 J12190 Brass 8424BR, 8425BR, 8426BR, 8430BR


279



Fluted Surface Abrasive Thermal Barrier Thresholds J32290 Aluminum 8424SIA, 8425SIA, 8426SIA, 8427SIA, 8428SIA, 8429SIA,

8430SIA J12290 Brass 8424BRSIA, 8425BRSIA, 8426BRSIA, 8430BRSIA

Fluted Surface Barrier Free Thermal Barrier Thresholds J32139 Aluminum 8424, 8425, 8426, 8427, 8428, 8429, 8430 J12139 Brass 8424BR, 8425BR, 8426BR, 8430BR

Fluted Surface Abrasive Barrier Free Thermal Barrier Thresholds J32239 Aluminum 8424SIA, 8425SIA, 8426SIA, 8427SIA, 8428SIA, 8429SIA,

8430SIA J12239 Brass 8424BRSIA, 8425BRSIA, 8426BRSIA, 8430BRSIA Applied Stop Strip Type Thresholds Add one of the following Stop Strips to a Saddle, Half Saddle or Plate Threshold listed J32110 Aluminum 2, 4, 700E, 8136 J12110 Brass 2BR, 4BR

Applied Stop Strip Barrier Free Type Thresholds Add one of the following Stop Strips to a ¼” high Saddle, Half Saddle or Plate Threshold J32113 Aluminum 4, 700E, 8136 J12113 Brass 4BR

Applied Stop Strip with Gasket Type Thresholds Add one of the following Stop Strips to a Saddle, Half Saddle or Plate Threshold listed J32120 Aluminum 2N, 2P, 2S, 4N, 4S, 700EN, 700ES J12120 Brass 2NBR, 2PBR, 2SBR, 4NBR, 4SBR

Applied Stop Strip with Gasket Barrier Free Type Thresholds Add one of the following Stop Strips to a ¼” high Saddle, Half Saddle or Plate Threshold

J32123 Aluminum 4N, 4S, 700EN, 700ES J12123 Brass 4NBR, 4SBR

Fluted Surface Carpet Divider Thresholds

J32140 Aluminum 404-75, 414-75

Fluted Surface Abrasive Carpet Divider Thresholds J32240 Aluminum 404-75SIA, 414-75SIA

Smooth Surface Carpet Divider Thresholds J32340 Aluminum 404, 414 J12340 Brass 404BR, 418BR


280



Smooth Surface Abrasive Carpet Divider Thresholds J32340 Aluminum 404SIA, 414SIA J12340 Brass 404BRSIA, 418BRSIA Smooth Surface Barrier Free Carpet Divider Thresholds J32334 Aluminum 404, 414 J12334 Brass 404BR, 418BR

Smooth Surface Abrasive Barrier Free Carpet Divider Thresholds J32334 Aluminum 404SIA, 414SIA J12334 Brass 404BRSIA, 418BRSIA

5.4.3 Half Saddle Thresholds

Fluted Surface Thresholds J33100 Aluminum 215, 315, 321, 322, 323, 324, 325, 327, 350, 415, 457, 458, 898 J13100 Brass 215BR, 315BR, 321BR, 322BR, 324BR, 325BR, 350BR, 415BR

Fluted Surface Abrasive Thresholds

J33200 Aluminum 215SIA, 315SIA, 321SIA, 322SIA, 323SIA, 324SIA, 325SIA, 327SIA, 350SIA, 415SIA, 457SIA, 458SIA , 898SIA

J13200 Brass 215BRSIA, 315BRSIA, 321BRSIA, 322BRSIA, 324BRSIA, 325BRSIA, 350BRSIA, 415BRSIA

Fluted Surface Barrier Free Thresholds J33130 Aluminum 215, 315, 321, 322, 323, 324, 325, 327, 350, 415, 898 J13130 Brass 215BR, 315BR, 321BR, 322BR, 324BR, 325BR, 350BR, 415BR Fluted Surface Abrasive Barrier Free Thresholds J33230 Aluminum 215SIA, 315SIA, 321SIA, 322SIA, 323SIA, 324SIA, 325SIA,

327SIA, 350SIA, 415SIA , 898SIA J13230 Brass 215BRSIA, 315BRSIA, 321BRSIA, 322BRSIA, 324BRSIA,

325BRSIA, 350BRSIA, 415BRSIA 5.4.4 Interlocking Thresholds Hook Strip Applied to the Door Type Thresholds J34170 Aluminum 435, 437, 439, 440, 442-5, 895 J14170 Brass 442BR, 895BR

Hook Strip Applied to the Door Abrasive Type Thresholds J34270 Aluminum 435SIA, 437SIA, 439SIA, 440SIA, 442-5SIA, 895SIA J14270 Brass 442BRSIA, 895BRSIA


281


ANSI # Material NGP Product # 5.4.5 Latching/Rabbeted Thresholds Fluted Surface Thresholds J35100 Aluminum 803, 804, 883, 884, 890, 896, 898 J15100 Brass 883BR, 884BR, 890BR, 896BR

Fluted Surface Abrasive Thresholds J35200 Aluminum 803SIA, 804SIA, 883SIA, 884SIA, 890SIA, 896SIA, 898SIA J15200 Brass 883BRSIA, 884BRSIA, 890BSIA, 896BRSIA J35400 Cast Alum. 4884, 4891 Fluted Surface Barrier Free Thresholds J35130 Aluminum 896, 898 J15130 Brass 896BR Fluted Surface Abrasive Barrier Free Thresholds J35230 Aluminum 896SIA, 898SIA J15230 Brass 896BRSIA Fluted Surface Thermal Barrier Thresholds J35190 Aluminum 8434, 8435, 8436, 8437 J15190 Brass 8434BR, 8435BR, 8437BR

Fluted Surface Abrasive Thermal Barrier Thresholds J35290 Aluminum 8434SIA, 8435SIA, 8436SIA, 8437SIA J15290 Brass 8434BRSIA, 8435BRSIA, 8437BRSIA Smooth Surface Thresholds J35300 Aluminum 882, 894, 8135 J55300 Stainless Steel 883SS, 884SS, 896SS Smooth Surface Abrasive Thresholds J35400 Aluminum 882SIA, 894SIA, 8135SIA J55400 Stainless Steel 883SSSIA, 884SSSIA, 896SSSIA

Smooth Surface Barrier Free Thresholds J55330 Stainless Steel 896SS

Smooth Surface Abrasive Barrier Free Thresholds J55430 Stainless Steel 896SSSIA


282


ANSI # Material NGP Product # 5.4.6 Latching/Rabbeted Thresholds with Gasket Fluted Surface Thresholds J36100 Aluminum 803N, 803S, 803P, 804N, 804S, 804P, 883N, 883S, 883P, 884N,

884S, 884P, 890N, 890S, 890P, 896N, 896S, 898N, 898S J16100 Brass 883NBR, 883SBR, 883PBR, 884NBR, 884SBR, 884PBR,

890NBR, 890SBR, 890PBR, 896NBR, 896SBR Fluted Surface Abrasive Thresholds J36200 Aluminum 803NSIA, 803SSIA, 803PSIA, 804NSIA, 804SSIA, 804PSIA,

883NSIA, 883SSIA, 883PSIA, 884NSIA, 884SSIA, 884PSIA, 890NSIA, 890SSIA, 890PSIA, 896NSIA, 896SSIA, 898NSIA, 898SSIA

J16200 Brass 883NBRSIA, 883SBRSIA, 883PBRSIA, 884NBRSIA, 884SBRSIA, 884PBRSIA, 890NBRSIA, 890SBRSIA, 890PBRSIA, 896NBRSIA, 896SBRSIA

Fluted Surface Barrier Free Thresholds J36130 Aluminum 896N, 896S, 898N, 898S J16130 Brass 896NBR, 896SBR Fluted Surface Abrasive Barrier Free Thresholds J36230 Aluminum 896NSIA, 896SSIA898NSIA, 898SSIA J16230 Brass 896NBRSIA, 896SBRSIA Fluted Surface Thermal Barrier Thresholds J36190 Aluminum 8434N, 8434S, 8434P, 8435N, 8435S, 8435P, 8436N, 8436S,

8436P, 8437N, 8437S, 8437P J16190 Brass 8434NBR, 8434SBR, 8434PBR, 8435NBR, 8435SBR,

8435PBR, 8437NBR, 8437SBR, 8437PBR

Fluted Surface Abrasive Thermal Barrier Thresholds J36290 Aluminum 8434NSIA, 8434SSIA, 8434PSIA, 8435NSIA, 8435SSIA,

8435PSIA, 8436NSIA, 8436SSIA, 8436PSIA, 8437NSIA, 8437SSIA, 8437PSIA

J16290 Brass 8434NBRSIA, 8434SBRSIA, 8434PBRSIA, 8435NBRSIA, 8435SBRSIA, 8435PBRSIA, 8437NBRSIA, 8437SBRSIA, 8437PBRSIA

Smooth Surface Thresholds

J36300 Aluminum 894N, 894S, 894P, 8135N, 8135S, 8135P

J56300 Stainless Steel 883SSS, 884SSS, 896SSS


283


ANSI # Material NGP Product # Smooth Surface Abrasive Thresholds J36400 Aluminum 894NSIA, 894SSIA, 894PSIA,

8135NSIA, 8135SSIA, 8135PSIA J56400 Stainless Steel 883SSSSIA, 884SSSSIA, 896SSSSIA Smooth Surface Barrier Free Thresholds J56330 Stainless Steel 896SSS

Smooth Surface Abrasive Barrier Free Thresholds J56430 Stainless Steel 896SSSSIA 5.4.7 Plate Thresholds

Fluted Surface Thresholds J37100 Aluminum 8142, 8143, 8144, 8145, 8146, 8147, 8148, 8149, 8150, 8163,

8164, 8167, 8170 J17100 Brass 8142BR, 8143BR, 8144BR, 8145BR, 8146BR J77100 Neoprene 8168N

Fluted Surface Abrasive Thresholds J37200 Aluminum 8142SIA, 8143SIA, 8144SIA, 8145SIA, 8146SIA, 8147SIA,

8148SIA, 8149SIA, 8150SIA, 8163SIA, 8164SIA, 8167SIA, 8170SIA

J17200 Brass 8142BRSIA, 8143BRSIA, 8144BRSIA, 8145BRSIA, 8146BRSIA

Fluted Surface Barrier Free Thresholds J37130 Aluminum 8142, 8143, 8144, 8145, 8146, 8147, 8148, 8149, 8150, 8170 J17130 Brass 8142BR, 8143BR, 8144BR, 8145BR, 8146BR J77130 Neoprene 8168N

Fluted Surface Abrasive Barrier Free Thresholds J37230 Aluminum 8142SIA, 8143SIA, 8144SIA, 8145SIA, 8146SIA, 8147SIA,

8148SIA, 8149SIA, 8150SIA, 8170SIA J17230 Brass 8142BRSIA, 8143BRSIA, 8144BRSIA, 8145BRSIA,

8146BRSIA

Fluted Surface Plate Assembly Thresholds J37160 Aluminum 8142, 8143, 8144, 8145, 8146, 8147, 8148, 8149, 8150, 8163,

8164, 8167 J17160 Brass 8142BR, 8143BR, 8144BR, 8145BR, 8146BR J77160 Neoprene 8168N


284



Fluted Surface Abrasive Plate Assembly Thresholds J37260 Aluminum 8142SIA, 8143SIA, 8144SIA, 8145SIA, 8146SIA, 8147SIA,

8148SIA, 8149SIA, 8150SIA, 8163SIA, 8164SIA, 8167SIA J17260 Brass 8142BRSIA, 8143BRSIA, 8144BRSIA 8145BRSIA,

8146BRSIA

Fluted Surface Barrier Free Plate Assembly Thresholds J37163 Aluminum 8142, 8143, 8144, 8145, 8146, 8147, 8148, 8149, 8150 J17163 Brass 8142BR, 8143BR, 8144BR, 8145BR, 8146BR J77163 Neoprene 8168N Fluted Surface Abrasive Barrier Free Plate Assembly Thresholds J37263 Aluminum 8142SIA, 8143SIA, 8144SIA, 8145SIA, 8146SIA, 8147SIA,

8148SIA, 8149SIA, 8150SIA J17263 Brass 8142BRSIA, 8143BRSIA, 8144BRSIA 8145BRSIA,

8146BRSIA Smooth Surface Plate Thresholds J37300 Aluminum 814, 818, 828, 838, 8132, 8136 J17300 Brass 818BR, 8136BR J57300 Stainless Steel 814SS, 818SS Smooth Surface Abrasive Plate Thresholds J37400 Aluminum 814SIA, 818SIA, 838SIA, 8132SIA, 8136SIA J17400 Brass 818BRSIA, 8136BRSIA J57400 Stainless Steel 814SSSIA, 818SSSIA

Smooth Surface Barrier Free Plate Thresholds J37330 Aluminum 814, 818, 828, 8132, 8136 J17330 Brass 818BR, 8136BR J57330 Stainless Steel 814SS, 818SS

Smooth Surface Abrasive Barrier Free Plate Thresholds J37430 Aluminum 814SIA, 818SIA, 8132SIA, 8136SIA J17430 Brass 818BRSIA, 8136BRSIA J57430 Stainless Steel 814SSSIA, 818SSSIA

Smooth Surface Plate Assembly Thresholds

J37360 Aluminum 8133, 8134, 8136, 8137, 8138, 8139, 8140, 8141, 8151, 8152, BAR1, BAR2, BAR3, BAR4, BAR5 J17360 Brass 8136BR, 8139BR, 8140BR, 8141BR, BAR1BR, BAR2BR, BAR3BR, BAR4BR, BAR5BR J17560 Stainless Steel BAR2SS, BAR6SS


285



Smooth Surface Abrasive Plate Assembly Thresholds J37460 Aluminum 8133SIA, 8134SIA, 8136SIA, 8137SIA, 8138SIA, 8139SIA,

8140SIA, 8141SIA, 8151SIA, 8152SIA J17460 Brass 8136BRSIA, 8139BRSIA, 8140BRSIA, 8141BRSIA Smooth Surface Barrier Free Plate Assembly Thresholds J37363 Aluminum 8133, 8136, 8137, 8139 J17363 Brass 8136BR, 8139BR Smooth Surface Abrasive Barrier Free Plate Assembly Thresholds J37463 Aluminum 8133SIA, 8136SIA, 8137SIA, 8139SIA J17463 Brass 8136BRSIA, 8139BRSIA 5.4.8 Ramped Thresholds

Fluted Surface Barrier Free Ramped Thresholds J38130 Aluminum 654, 657, 658, 951, 953, 954, 955, 957, 959, 960, 961, 962, R50,

RO50, R75, RO75, R100, RO100, R125, RO125, R150, RO150, R175, RO175, R200, RO200, R225, RO225, R250, RO250, RCE-9, RCE-15, RCE-21, RCE-30

J78130 Rubber RR42, RR952

Fluted Surface Abrasive Barrier Free Ramped Thresholds J38230 Aluminum 654SIA, 657SIA, 658SIA, 951SIA, 953SIA, 954SIA, 955SIA,

957SIA, 959SIA, 960SIA, 961SIA, 962SIA, R50SIA, RO50SIA, R75SIA, RO75SIA, R100SIA, RO100SIA, R125SIA, RO125SIA, R150SIA, RO150SIA, R175SIA, RO175SIA, R200SIA, RO200SIA, R225SIA, RO225SIA, R250SIA, RO250SIA, RCE-9SIA, RCE-15SIA, RCE-21SIA, RCE-30SIA

5.4.9 Saddle Thresholds for Floor Closers

Fluted Surface Type A Thresholds J39100 Aluminum 1-427E, 1-428E, 1-429E, 1-430E, 1-713, 1-813, 1-913, 1-1013 J19100 Brass 1-427BR, 1-428BR, 1-430BR, 1-713BR, 1-813BR

Fluted Surface Barrier Free Type A Thresholds

J39130 Aluminum 1-427E, 1-428E, 1-429E, 1-430E, 1-713, 1-813, 1-913, 1-1013 J19130 Brass 1-427BR, 1-428BR, 1-430BR, 1-713BR, 1-813BR

Fluted Surface Abrasive Type A Thresholds

J39200 Aluminum 1-427ESIA, 1-428ESIA, 1-429ESIA, 1-430ESIA, 1-713SIA, 1-813SIA, 1-913SIA, 1-1013SIA

J19200 Brass 1-427BRSIA, 1-428BRSIA, 1-430BRSIA, 1-713BRSIA, 1-813BRSIA


286



Fluted Surface Abrasive Barrier Free Type A Thresholds J39230 Aluminum 1-427ESIA, 1-428ESIA, 1-429ESIA, 1-430ESIA, 1-713SIA,

1-813SIA, 1-913SIA, 1-1013SIA J19230 Brass 1-427BRSIA, 1-428BRSIA, 1-430BRSIA, 1-713BRSIA,

1-813BRSIA Fluted Surface Type B Thresholds J39150 Aluminum 3-427E, 3-428E, 3-429E, 3-430E, 3-713, 3-813, 3-913, 3-1013 J19150 Brass 3-427BR, 3-428BR, 3-430BR, 3-713BR, 3-813BR Fluted Surface Barrier Free Type B Thresholds J39153 Aluminum 3-427E, 3-428E, 3-429E, 3-430E, 3-713, 3-813, 3-913, 3-1013 J19153 Brass 3-427BR, 3-428BR, 3-430BR, 3-713BR, 3-813BR

Fluted Surface Abrasive Type B Thresholds J39250 Aluminum 3-427ESIA, 3-428ESIA, 3-429ESIA, 3-430ESIA, 3-713SIA,


3-813BRSIA

Fluted Surface Abrasive Barrier Free Type B Thresholds J39253 Aluminum 3-427ESIA, 3-428ESIA, 3-429ESIA, 3-430ESIA, 3-713SIA,


3-813BRSIA Fluted Surface Type C Thresholds

J39150 Aluminum 4-427E, 4-428E, 4-429E, 4-430E, 4-713, 4-813, 4-913, 4-1013 J19150 Brass 4-427BR, 4-428BR, 4-430BR, 4-713BR, 4-813BR Fluted Surface Barrier Free Type C Thresholds J39153 Aluminum 4-427E, 4-428E, 4-429E, 4-430E, 4-713, 4-813, 4-913, 4-1013 J19153 Brass 4-427BR, 4-428BR, 4-430BR, 4-713BR, 4-813BR

Fluted Surface Abrasive Type C Thresholds



Fluted Surface Abrasive Barrier Free Type C Thresholds




287



Fluted Surface Type D Thresholds J39150 Aluminum 5-427E x 424E, 5-428E x 425E, 5-713 x 413, 5-813 x 513 J19150 Brass 5-427BR x 424BR, 5-428BR x 425BR, 5-713BR x 413BR,

5-813BR x 513BR Fluted Surface Barrier Free Type D Thresholds J39153 Aluminum 5-427E x 424E, 5-428E x 425E, 5-713 x 413, 5-813 x 513 J19153 Brass 5-427BR x 424BR, 5-428BR x 425BR, 5-713BR x 413BR,

5-813BR x 513BR

Fluted Surface Abrasive Type D Thresholds J39250 Aluminum 5-427E x 424E x SIA, 5-428E x 425E x SIA, 5-713 x 413 x SIA,

5-813 x 513 x SIA J19250 Brass 5-427BR x 424BR x SIA, 5-428BR x 425BR x SIA,

5-713BR x 413BR x SIA, 5-813BR x 513BR x SIA

Fluted Surface Abrasive Barrier Free Type D Thresholds J39253 Aluminum 5-427E x 424E x SIA, 5-428E x 425E x SIA, 5-713 x 413 x SIA,

5-813 x 513 x SIA J19253 Brass 5-427BR x 424BR x SIA, 5-428BR x 425BR x SIA,

5-713BR x 413BR x SIA, 5-813BR x 513BR x SIA FINISHES AVAILABLE FOR THRESHOLDS Finish Description ANSI/BHMA # NGP Symbol Mill Finish Aluminum Uncoated 719 None (Standard) Dark Oxidized Satin Bronze Anodized 710 DKB Bright Aluminum Uncoated 717 POL Mill Finish Brass Uncoated 720 BR Bright Brass Uncoated 721 BR-POL Dark Oxidized Bronze Oil Rubbed 722 BR-DKB Bright Stainless Steel 629 SS-POL

Satin Stainless Steel 630 SS-Brushed


288

PEMKO MANUFACTURING COMPANY CERTIFIED THRESHOLDS

PEMKO MANUFACTURING COMPANY CERTIFIED THRESHOLDS ANSI / BHMA A156.21-2001

Rev: 9-30-03 5.4.1 Compressing Top Threshold ANSI Type No. Certified Licensee’s Series Designation J31100 203AV, 204AV, 206AV, 207AV 5.4.2 Saddle Thresholds ANSI Type No. Certified Licensee’s Series Designation J12100 / J32100 Brass: 170B, 171B, 172B, 176B, 198B, 254X4B, 254X5B, Fluted Surface 255X5B, 270B, 271B, 272B, 274X4B, 276B Aluminum: 156A, 166A, 169A, 170A, 171A, 172A, 176A, 198A, 270A, 271A, 272A, 276A, 1700A, 2548A, 2549A, 2550A, 2748A, 2749A, 2750A J12300 / J32300 Brass: 151B, 173B, 175B Smooth Surface Aluminum: 151A, 154A, 173A, 175A J52300 Stainless Steel: 154SS, 175SS Smooth Surface J12130 / J32130 Brass: 170B, 171B, 172B, 176B, 254X4B, 254X5B, Fluted Surface 255X5B, 270B, 271B, 272B, 274X4B, 276B Barrier Free Aluminum: 166A, 169A, 170A, 171A, 172A, 176A, 270A, 271A, 272A, 276A, 1700A, 2548A, 2549A, 2550A, 2748A, 2749A, 2750A J12330 / J32330 Brass: 151B, 173B, 175B Smooth Surface Aluminum: 151A, 154A, 173A, 175A Barrier Free J52330 Stainless Steel: 154SS, 175SS Smooth Surface Barrier Free J32180 Fluted Offset Aluminum: 157A, 158A, 182A, 2727A J32138 Barrier Free Aluminum: 158A, 2727A


289

PEMKO MANUFACTURING COMPANY Continued J12190 / J32190 Brass: 252X2BFG, 252X3BFG, 253X3BFG, 253X4BFG, Fluted Surface 254X4BFG, 254X5BFG, 255X5BFG, 273X3BFG, Thermal Barrier 273X4BFG, 274X4BFG Aluminum: 252X2AFG, 252X3AFG, 253X3AFG, 253X4AFG, 254X4AFG, 254X5AFG, 255X5AFG 273X3AFG, 273X4AFG, 274X4AFG J12139 / J32139 Same as J12190 and J32190 above Thermal Barrier And Barrier Free J12110 / J32110 Add any of the following Stop Strips to any of the above Applied Stop Strip listed Saddle Type Thresholds. Brass: 184B, 290BSTOP. Example 170BX184B Aluminum: 184A, 290ASTOP, 1842A Example: 272AX290ASTOP J12113 / J32113 Brass: 271BX290BSTOP, 272BX290BSTOP, Applied Stop Strip 274X4BX290BSTOP, 276BX290BSTOP Barrier Free Aluminum: 270AX1842A, 271AX1842A, 271AX290ASTOP, 272AX1842A, 272AX290ASTOP, 276AX1842A, 276AX290ASTOP, 2748AX1842A, 2748AX290ASTOP, 2749AX1842A, 2749AX290ASTOP, 2750AX1842A, 2750AX290ASTOP J12120 / J32120 Add any of the following Stop Strips to any of the above Applied Stop listed Saddle Type Thresholds. With Gasketing Brass: 184BT, 290BSSTOP. Example 170BX184BT Aluminum: 184AT, 290ASSTOP, 1842APK, 1842AS Example: 272AX290ASSTOP J12123 / J32123 Brass: 271BX290BVSTOP, 272BX290BVSTOP Applied Stop With 274X4BX290BVSTOP, 276BX290BVSTOP Gasket Barrier Free Aluminum: 270AX1842APK, 270AX1842AS, 271AX1842APK, 271AX1842AS, 271AX290ASSTOP, 272AX1842APK, 272AX1842AS, 272AX290ASSTOP, 276AX 1842APK, 276AX1842AS, 276AX290ASSTOP, 2748AX1842APK, 2748AX1842AS, 2748AX290ASSTOP, 2749AX1842APK, 2749AX1842AS, 2749AX290ASSTOP, 2750AX1842APK, 2750AX1842AS, 2750AX290ASSTOP


290

PEMKO MANUFACTURING COMPANY Continued J12134 / 32134 Brass: 236B, 2364B Carpet Separator, Fluted Aluminum: 236A, 2364A, 2366A Surface, Barrier Free J32140 Carpet Separator Aluminum: 246A, 2464A 5.4.3 Half Saddle Thresholds ANSI Type No. Certified Licensee’s Series Designation J13100 / J33100 Brass: 227B, 252B, 253B, 254B, 255B, 273B, 274B Fluted Surface Aluminum: 157A, 158A, 168A, 227A, 229A, 252A, 253A, 254A, 255A, 273A, 274A, 1877A, 2727A J13130 / J33130 Same as above except for 1877A. Barrier Free J13180 Aluminum: 1877A Fluted Offset 5.4.4 Interlocking Thresholds ANSI Type No. Certified Licensee’s Series Designation J14170 / J34170 Brass: 101B, 108B, 114B, Hook Strip Applied Aluminum: 101A, 107A, 114A, 121A, 123A To Door Specify Hook Strip Required. B61 Bronze, Z61 Zinc, 66A, 67A 5.4.5 Latching/Rabbeted Thresholds ANSI Type No. Certified Licensee’s Series Designation J15100 / J35100 Brass: 177B, 179B, 181B, 252X226B, Fluted Surface 253X226B, 254X226B, 255X226B, 2005B Aluminum: 177A, 179A, 181A, 252X226A, 253X226A, 254X226A, 255X226A, 277A, 2005A, J15130 / J35130 Brass: 2005B Fluted, Barrier Free Aluminum: 2005A J15190 / J35190 Brass: 252X226BFG, 253X226BFG, 254X226BFG, Fluted Surface 255X226BFG Thermal Barrier Aluminum: 252X226AFG, 253X226AFG, 254X226AFG, 255X226AFG


291

PEMKO MANUFACTURING COMPANY Continued J15300 / J35300 Brass: 159B Smooth Surface Aluminum: 159A, 185A, 1855A 5.4.6 Latching/Rabbeted Thresholds with Gasket ANSI Type No. Certified Licensee’s Series Designation J16100 / J36100 Brass: 177BT, 179BT, 181BT, 252X226BT, 253X226BT, Fluted Surface 254X226BT, 255X266BT, 2005BT Aluminum: 177AT, 179AT, 181AT, 2005AT, 252X266AT, 253X226AT, 254X226AT, 255X226AT, 277AR, 2005AT J16130 / J36130 Brass: 2005B Barrier Free Aluminum: 2005AT J16190 / J36190 Brass: 252X226BFGT, 253X226BFGT, 254X226BFGT, Fluted Surface 255X226BFGT Thermal Barrier Aluminum: 252X226AFGT, 253X226AFGT, 254X226AFGT, 255X226AFGT J16300 / J36300 Brass: 159BT Smooth Surface Aluminum: 159AT, 185AT, 1855AT 5.4.7 Plate Thresholds ANSI Type No. Certified Licensee’s Series Designation J17100 / J37100 Brass: 190B, 191B, 192B, 193B Fluted Surface Aluminum: 190A, 191A, 192A, 193A, 228A, 230A, 2286A, 19125A, 19325A J17300 / J37300 Brass: 174B, 194B, 195B, 196B, 200B Smooth Surface Aluminum: 14/1A, 18/1A,174C, 194A, 195A, 196A, 200A, 1951A J17130 / J37130 Brass: 190B, 191B, 192B, 193B Fluted, Barrier Free Aluminum: 190A, 191A, 192A, 193A, 228A, 2286A, 19125A, 19325 J17330 / J37330 Brass: 174B, 195B, 196B, 200B Smooth, Barrier Free Aluminum: 14/1A, 18/1A, 174C, 195A, 196A, 200A, 1951A


292

PEMKO MANUFACTURING COMPANY Continued 5.4.8 Ramped Thresholds ANSI Type No. Certified Licensee’s Series Designation J18130 / J38130 Brass: 257B, 259B, 257X259B Fluted Surface Aluminum: 257A, 259A, 257X259A, RAMP1A, RAMP 2A, RAMP 3A, RAMP 4A, RAMP 5A, RAMP 6A, RAMP 7A, RAMP 8A, RAMP 9A, RAMP 10A, RAMP 11A, RAMP 12A, WING 10, WING 16, WING EXT J38230 / J38230 Same as J18130 and J38130 above except add suffix “K” Fluted Surface with to designation. Example: RAMP 7AK Abrasive Material 5.4.9 Saddle Thresholds for Floor Closers (Note: Type must be specified) ANSI Type No. Certified Licensee’s Series Designation (Type A) Pemko Type 11 J19100 / J39100 Brass: 176B, 276B, 254X4B, 274X4B, 193BX2/195B, Fluted Surface 257B/259B Aluminum: 176A, 276A, 2548A, 2748A, 193AX2/195A, 257A/259A, RAMP 1A J19130 / J39130 Same as J19100 and J39100 above. As above, Barrier Free (Type B) Pemko Type 13 J19150 / J39150 Brass: 176B, 276B, 254X4B, 274X4B, 193BX2/195B, Fluted Surface, Ends 257B/259B Mitered Aluminum: 176A, 276A, 2548A, 2748A, 257A/259A, RAMP 1A J19135 / J19335 Same as J19150 and J39150 above. As above, Barrier Free (Type C) Pemko Type 14 J19150 / J39150 Brass: 176B, 276B, 254X4B, 274X4B, 193BX2/195B, Fluted Surface, Ends 257B/259B Mitered Aluminum: 176A, 276A, 2548A, 2748A, 257A/259A, RAMP 1A


293

PEMKO MANUFACTURING COMPANY Continued J19135 / J19335 Same as J19150 and J39150 above. As above, Barrier Free (Type D) Pemko Type 15 J19150 / J39150 Brass: 176BX170B, 276BX270B, 176BX171B, Fluted Surface, Ends 276BX271B, 254X4BX170B, 274X4BX270B, Mitered 254X4BX171B, 274X4BX271B Aluminum: 176AX170A, 276AX270A, 176AX171A, 276AX271A, 2548AX170A, 2748AX270A, 2548AX171A, 2748AX271A J19135 / J19335 Same as J19150 and J39150 above. As above, Barrier Free

Door Gasketing System

ANSI/BHMA A156.22

2009 DIRECTORY

Door G

asketing System


295

GENERAL INFORMATION EXPLANATION OF THE NUMBERING SYSTEM The first letter indicates a BHMA Product Section letter assigned to gasketing. R- Assigned to BHMA organizational Section J for Architectural Door Trim and designates gasketing. The second character designates retainer material. 1 – Brass or Bronze 5 – Stainless Steel 3 – Aluminum 0 – Optional material or none used The third character designates the gasketing type or material. A – Brush N – Rubber Fabric B – Neoprene, Solid P – Intumescent C – Neoprene, Expanded, Closed Cell Q – Intumescent/ Brush D – Vinyl R – Intumescent/ Neoprene, Solid E – Silicone Rubber S – Intumescent/ Neoprene, Expanded, Closed Cell F - Pile T – Intumescent/ Vinyl G – Thermoplastic Elastomer (TPE) U – Intumescent/ Silicone Rubber H – Thermoplastic Urethane (TPU) V – Intumescent/ Pile J – Thermoplastic Rubber W – Intumescent/ Thermoplastic Elastomer (TPE) K – Spring Metal X – Intumescent/ Thermoplastic Urethane (TPU) L – Magnetic Y – Optional Material or None Used M – Felt Z – Intumescent/ Thermoplastic Rubber The fourth character designates the product type. 1 Head and Jamb 6 Astragal Overlapping 2 Head and Jamb, Adjustable 7 Astragal Split or Compensating 3 Automatic Door Bottom 8 Astragal Adjustable 4 Door Sweep or Shoe 9 Rain drip without gasket 5 Door Sweep or Shoe with Drip Cap Other The fifth character indicates where the gasketing is applied. 1 Door Edge 6 Frame Soffit (Hollow Metal), Frame Stop (Wood) 2 Door Edge, Mortise 7 Frame Face 3 Door Face 8 Kerf 4 Door Face Semi-Mortise 9 Stop (Hollow Metal), Stop Face (Wood) 5 Frame Rabbet (surface or mortise) 0 Other The sixth character indicates the rating of the gasketing. Rating 4 used for smoke rated gaskets in accordance with 5.3. Rating 5 used for air leakage rated gaskets in accordance with 5.4. Rating 6 used for items not rated accordance with 5.3 or 5.4.


296

In addition to the type numbers, specify the following as appropriate: A – Retainer finish D–Fastening system if different from shown or if not shown B – Retainer size E – Door or opening size C – Gasket size F – Type of door and frame Example: R0Y164 R - Gasketing 0 - Optional material for flange Y - Optional material for gasketing 1 - Head and jamb type 6 - Frame stop applied 4 - Rating 4 Type numbers shown in this Standard contain the first numerical designation as 0 indicating optional material if a retainer is used. Users of this Standard wishing to specify a brass or bronze, aluminum, or stainless steel retainer shall substitute the first numerical designation 0 with 1, 3, or 5 as appropriate. Verify availability by consulting individual manufacturers catalogs. Type numbers in this Standard contain a letter following the first numerical designation and in most instances this letter is a Y indicating optional type or material. Users of this Standard wishing to delineate a specific material shall substitute the Y designation with the letter indicating the material desired. Verify availability by consulting individual manufacturers catalogs. Example: R3C264 R - Gasketing 3 - Aluminum Material for Flange C - Neoprene Expanded, Closed Cell 2 - Head and Jamb Type Adjustable 6 - Applied to Frame Rabbet 4 - Rating 4 used for Smoke Control Doors


297


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.22 - 2005 Door Gasketing and Edge Seal Systems

ANSI Part # Hager Part Number 8.1 Head and Jamb Type (Encased in a Retainer)

R3A164 800S-Brush, 802S-Brush R3C164 861S-Neoprene, 862S-Neoprene, 870S-Neoprene, 873S-Neoprene, 875S-

Neoprene, 878S-Neoprene, 881S-Neoprene, 885S-Neoprene, 890S-Neoprene, 891S-Neoprene (Bulb Type Only), 896S-Neoprene

R3D164 881S-Vinyl, 890S-Vinyl, 891S-Vinyl (Bulb Type Only), 896S-Vinyl R3E164 881S-Silicone, 890S-Silicone, 891S-Silicone (Round Bulb Type Only),

896S-Silicone R3F164 893S-Pile

8.2 Head and Jamb Type (Adjustable)

R3C264 860S-Neoprene, 864S-Neoprene R3D264 860S-Vinyl R3E264 860S-Silicone

8.3 Head and Jamb Type (Self Adhesive) R0E154 726-Silicone, 736-Silicone R0G154 721-TPE R0P154 729-Intumescent

8.7 Door Sweep Type (Encased in a Retainer) R3A416 802S-Brush R3C416 753-Neoprene, 754S-Neoprene R3D416 756S-Vinyl R3E416 750S-Silicone

8.8 Door Shoe Type (Encased in a Retainer) R3Y406 772S-Pile, 774S-Vinyl, 774S-Neoprene R3Y436 757-Neoprene, 754S-Neoprene


298

Hager Companies (Continued) A156.22 - 2005 Door Gasketing and Edge Seal Systems

ANSI Part # Hager Part Number 8.10 Automatic Door Bottom Type, Door Face (Encased in a Retainer)

R3E336 740S-Silicone R3C336 740S-Neoprene, 747S-Neoprene

8.11 Automatic Door Bottom Type, Door Edge (Encased in a Retainer)

R3C346 730S-Neoprene, 743S-Neoprene R3D346 742S-Vinyl R3E346 730S-Siicone

8.12 Meeting Stiles Type, Split Overlapping R3B736 872S-Neoprene R3D736 756S-Vinyl Fin Type

8.14 Meeting Stiles Type, Meeting Astragals R0C724 771S-Neoprene

8.18 Meeting Stiles Type, Overlapping or Tee R3C634 837S-Neoprene R3E634 837S-Silicone R3C664 874S-Neoprene R5Y634 835S-Stainless Steel

8.20 Rain Drip

R3Y936 810S R3Y976 810S


299

National Guard Products 4985 East Raines Road Memphis, TN 38118

(800) 647-7874 www.ngp.com

CERTIFIED GASKETING ANSI/BHMA A156.22 – 2005

ANSI # NGP Product # 8.1 Head and Jamb R0U154 9500 x 2525, 9800 x 5050, 9890 x 5050 R0W154 9450, 9550, 9750, 9850 R0W154 9500 x 5020, 9800 x 5020, 9890 x 5020 R0W156 9500, 9800, 9890 R1B164 129NBR R1C165 120NBR, 122NBR, 130NBR R1E164 120SBR, 130SBR R3A164 600, 602, A605, B606, A617, A625, A626, 670, 672, 675, 676, 706, 706E,

9000, 9600, 9605, 9675, 9706E R3B164 129N, 135N, 137N, 161N, 170N, 172N, 700N, 700EN R3C164 108N, 110N, 120N, 122N, 127N, 130N, 131N, 132N, 133N, 134N, 165N R3E164 110S, 120S, 127S, 130S, 134S, 137S, 152S, 155S, 156S, 160S, 161S,

162S, 165S, 170S, 172S, 700S, 700ES, 707S, 9001, 9002, 9700, 9700E R3F166 161P, 170P, 185P, 701P, 701EP R3S164 9004 R3Y165 184Q R5B164 129NSS R5C165 120NSS, 122NSS, 127NSS, 130NSS R5E164 120SSS, 127SSS, 130SSS 8.2 Head and Jamb, Adjustable R3B264 106N, 141N, 1038N, 3038N R3C264 103N, 104N, 105N, 107N, 303N, 304N, 305N R3E264 106S, 107S, 141S R3F266 141P


300


ANSI # NGP Product # 8.3 Head and Jamb, Self-Adhesive R0E006 5100 R0E154 2525, 5040, 5050, 5060 R0G154 5020 R0Y155 PF183 8.4 Head and Jamb, Metallic Spring R1K155 43CB, 43SB, 44SB, 45SB 8.5 Head and Jamb, Magnetic R3L165 157M, 159M 8.6 Head and Jamb, Two Piece Interlocking R3C105 123N x 121, 123N x 124 8.7 Door Sweep

R1B434 200NBR R1E434 200SBR R3A434 600, A605, B606, C607, 672, 675, 9600, 9605, 9675 R3B434 117N, 197N, 198N, 199N, 200N, 201N, 202N, 203N R3E434 200S R3H436 198U, 200U R3R434 339FS R5B434 200NSS R5E434 200SSS

8.8 Door Shoe R3A414 99WH, 99NWH, 99VWH R3B414 15N, 26N, 99N, 112N, 113N, 116N, 136N R3E414 136S R3F415 154P, 254P


301


ANSI # NGP Product # 8.9 Door Shoe with Drip Cap

R3A514 95WH, 618 R3B514 118N, 119N 8.10 Automatic Door Bottom, Surface Mounted

R1A334 221WHBR, 229WHBR R1C334 221NBR, 229NBR R1E334 221SBR, 229SBR R3A334 220WH, 222WH, 310WH, 680, 4440WH, 4441WH R3B334 520N 8.10 Automatic Door Bottom, Surface Mounted (continued) R3C334 220N, 222N, 223N, 310N, 420N, 421N R3E334 220S, 222S, 223S, 310S, 780S, 4440S, 4441S R5A334 221WHSS, 229WHSS R5C334 221NSS, 229NSS R5E334 221SSS, 229SSS 8.11 Automatic Door Bottom, Mortised

R3A324 225WH, 682, 683, 4447WH, 4448WH R3B324 522N R3C324 225N, 320N, 335N, 422N, 423N R3E324 225S, 320S, 335S, 4447S, 4448S

8.12 Meeting Stiles, Split Overlapping Astragals

R1J734 125NBR R1E734 9125BR R3E734 9115, 9125 R3J734 115N, 125N R5J734 125NSS R5E734 9125SS


302


ANSI # NGP Product # 8.13 Meeting Stiles, Split Meeting Astragals R3A734 600, A605, B606, 672, 675, 9600, 9605, 9675 R3B734 137N R3B735 123N x 121 R3E734 137S R3L734 140M, 149M, 189M 8.14 Meeting Stiles, Meeting Astragals R0W714 9550 R0W716 9500, 9800, 9890 R3A725 A635 R3B725 112N, 116N, 136N, 147N, 151N R3E725 136S, 151S R3F726 136P, 143P 8.15 Meeting Stiles, Mortise Adjustable Astragals R3E826 144S R3F826 144P 8.16 Meeting Stiles, Surface Adjustable Astragals R3E836 140S R3F836 140P 8. 17 Door Sweep with Rain Drip R3A534 C627


303


ANSI # NGP Product # 8.18 Meeting Stiles, Overlapping Astragals

R0Y636 139SP, 1392SP R0E634 139SP x 2525 R1Y636 139BR R1C635 109NBR R3Y635 139A, 176A R3B635 158N R3C635 109N, 114N, 148N R3E635 114S, 158S, 178S R5Y636 139SS R5C635 109NSS

8.19 Kerf in Gaskets R0G184 5021 R0Y185 284Q 8.20 Rain Drips R1Y936 17BR R3Y936 17 R3Y976 16 R5Y976 16SS

GASKET FINISHES AVAILABLE

Finish Description ANSI/BHMA # NGP Symbol Satin Aluminum, Clear Anodized 628 A Satin Aluminum, Gold Anodized 688 B Dark Oxidized Satin Bronze Anodized 710 DKB Bright Aluminum Uncoated 717 POL Mill Finish Aluminum Uncoated 719 None Mill Finish Brass Uncoated 720 BR Bright Brass Uncoated 721 BR-POL Dark Oxidized Bronze Oil Rubbed 722 BR-DKB Bright Stainless Steel 629 SS-POL Satin Stainless Steel 630 SS-Brushed


304

PEMKO MANUFACTURING COMPANY CERTIFIED GASKETING

ANSI / BHMA A156.22-2001

Head and Jamb ANSI Type No. Certified Licensee’s Series Designation R0E154 S4, S44, S52, S77, S88, S104, S105, S109 R0G154 PK4, PK33, PK52, PK55, PK401, PK403, PK404 R1C165 05BR R3A164 29344NB, 29346NB, 35041NB, 35061NB, 45041NB, 45061NB, 45062NB, 45100NB R3A165 45137NB, 45175NB, 45250NB, 45400NB R3B165 319N R3E164 290S, 297S, 303S, 316S, 2891S, 29310S R3E165 296S, 305S, 319S, 332S R3G164 285PK, 290PK, 296PK, 297PK, 316PK, 2891PK, 29310PK Head and Jamb, Adjustable ANSI Type No. Certified Licensee’s Series Designation R3C265 350R, 350SR, 379R R3G264 350PK, 350SPK, 379PK Automatic Door Bottoms ANSI Type No. Certified Licensee’s Series Designation R3A325 411NBL, 434NBL R3C325 411RL, 434RL R3E325 411SL, 420SL R3G325 411PKL, 420PKL, 434PKL


305

R3A335 4131NBL, 4301NBL R3C335 412RL, 430RL, 4131RL, 4301RL R3E335 4131SL R3G334 430PKL, 4131PKL, 4301PKL R3A345 4131NBL, 4301NBL R3C345 4131RL, 4301RL R3E345 412SL, 4131SL R3G344 412PKL, 430PKL, 4131PKL, 4301PKL Door Sweep or Shoe ANSI Type No. Certified Licensee’s Series Designation R3A415 90062NB, 90100NB, 90137NB R3A434 18041NB, 18061NB, 18062NB, 29324NB, 29326NB R3A435 309NB, 18100NB, 18137NB, 18175NB, 18250NB, 18400NB, 18950NB R3B435 315N, 321N, 368N R3D415 209V, 211V, 217V, 220V, 221V, 222V, 234V R3D435 307V R3G414 211PK, 217PK, 220PK, 221PK, 222PK, 234PK R5B434 321SSN


306

Door Sweep or Shoe with Drip Cap ANSI Type No. Certified Licensee’s Series Designation R1D514 216BV R1G515 216BPK R3A535 345NB, 3452NB R3D515 210V, 215V, 216FG, 216V, 2211V, 2221V R3D535 345V, 3452V R3G514 210PK, 215PK, 216PK, 2211PK, 2221PK

Electromagnetic Locks

ANSI/BHMA A156.23

2009 DIRECTORY

Electromagnetic Locks


308

GENERAL INFORMATION For a detailed description of function numbers of electromagnetic locks, consult ANSI/BHMA A156.23. EXPLANATION OF IDENTIFYING NUMBERS First letter denotes BHMA Product Section (E). First numeral is indoor or outdoor type designation: 0 – All except Indoor -only, 1 Indoor Only Second numeral identifies the type of product: 8 - Electromagnetic Locks Third and fourth numerals are product types based mainly on the mounting location and whether they are direct pull or shear designs: 50 through 99 are reserved for electromagnetic locks in various types. Fifth numeral designates the grade of the item: 1 is highest. Select the appropriate level of holding force for the application, and specify by a suffix “-holding force rating” in 500 pound increments, i.e. “-1000”. Example of identifying number: E18501-1000 E Section (E) 1 Indoor Only 8 Type of Product (Electromagnetic Lock) 50 Type Number as above 1 Grade (Grade 1) -1000 Holding Force Rating


309

DOOR CONTROLS INTERNATIONAL

2362 BISHOP CIRCLE EAST DEXTER, MI 48130

800-742-3634

ELECTROMAGNETIC LOCKS CERTIFIED TO A156.23-2004, GRADE 1

ANSI/BHMA Type Licensee’s Catalog designations Number 1000 lbf Ranking E08501 1401, 1402, 1403, 1404 E08531 1405, 1406 All are UL Listed Releasing Devices and UL Listed Auxiliary Locks for Fire Doors. All are dual voltage 12VDC or 24 VDC.

CERTIFIED FINISHES

Finish Type Licensee’s Symbol Clear Anodized Aluminum 28 Duranodic 313


310



CERTIFIED ELECTROMAGNETIC LOCKS

A156.23 2004

ANSI/BHMA Licensee’s Catalog Designations Type Number 1500 lbf Ranking 1000 lbf Ranking 500 lbf Ranking EO8501 EML-1011M EML-2071M EML-3081M EML-2075 EO8511 EML-1012M EML-2072M EML-3082M EO8521 EML-1011M SFW EML-2071M SFW (Up to 4’) (Up to 4’) EML-1012M DFW EML-2072M DFW (Up to 8’) (Up to 8’) EO8531 EML-1011M TJ1 EML-2071M TJ1 EML-3081M TJ81 EML-1012M TJ2 EML-2072M TJ2 EML-3082M TJ82 EO8541 EML-1011M HDB1 EML-2071M HDB1 EML-3081M HDB1 EML-1012M HDB2 EML-2072M HDB2 EML-3082M HDB2 EO8551 EML-1012M DV EML-1072M DV EO8561 EMSL-2061TJ EMSL-2061S EO8571 EMSL-2061, EMSL-2062, EMSL-2765, EMSL-2766 EO8581 EMSL-2061, EMSL-2062, EMSL-2765, EMSL-2766 All U.L. Listed. All are dual voltage 12 or 24VDC

CERTIFIED FINISHES Finish Type Licensee Symbols

Clear Anodized Aluminum 628/628 Duranodic Bronze 710/313


311

Locknetics Security Engineering 575 Birch Street

Forestville, CT 06010 860.584.9158

Certified Electromagnetic Locks – A156.23 ANSI Type Licensee’s Catalog Designations Numbers 1500 lbf Ranking 1000 lbf Ranking 500 lbf Ranking E80501 390+, 390+G, 390+PIR 350+, 70 320+, 40 390E E80511 392+, 390E-2 352+, 72 E80521 390+VLH, 392+VLH 350+VLH, 352+VLH 320+VLH, 322+VLH E08531 350+ TJ, 70 TJ 320+ TJ, 40 TJ 352+ TJ 322+ TJ E08541 390+HDB, 392+HDB 350+HDB, 352+HDB 320+HDB, 322+HDB 70HDB 40HDB E08551 390+VLH, 392+VLH 350+VLH, 352+VLH 320+VLH, 322+VLH E08561 GF3000, GF3000TJ E08571 280 E08581 GF3000, 280 E08591 GF3000, 280 E08601 GF3000BRD All of the above are UL listed. All are dual voltage.

Certified Finishes Finish Type Licensee’s Catalog Designations Clear Anodized Aluminum 628 Satin Black, Anodized 335

Special Finishes Available


312


NEW HAVEN, CT 06511 800/727-5477

A156.23 1999

CERTIFIED ELECTROMAGNETIC LOCKS

ANSI/BHMA Licensee’s Catalog Designation Type Number 1000 LBF Ranking E08501 1584 E08511 1585 E08531 1586 Dual Voltage 12VDC and 24VDC

CERTIFIED FINISHES FOR ELECTROMAGNETIC LOCKS Finish Type Licensee’s Symbol Aluminum EN Bronze EB Bronze Enamel ED Aluminum Anodized 28 Stainless Steel 32D


313

3580 Willow Lane, Westlake Village, CA 91361-4921 P.O. Box 6219, Westlake Village, CA 91359-6219 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: [email protected]


CERTIFIED ELECTROMAGNETIC LOCKS ANSI/BHMA Type Licensee’s Catalog designations Number 1500 Lbf Ranking 1000 lbf Ranking 500 lbf Ranking EO8501 1511 1571, 1575 1581 EO8511 1512 1572 1582 EO8571 1561, 1562, 1565, 1566 All the above are UL listed. All are dual voltage 12 or 24VDC except 1575 which is either 12 or 24VDC.

CERTIFIED FINISHES Finish Type Licensee Symbols Anodized Aluminum (V) 628 Duronodic (X) 313

Delayed Egress Locks

ANSI/BHMA A156.24

2009 DIRECTORY

Delayed Egress Locks


315



316

CORBIN RUSSWIN ARCHITECTURAL HARDWARE, INC. 255 EPISCOPAL ROAD

BERLIN, CT 06037 (860) 225-7411

CERTIFIED DELAYED EGRESS LOCKS (EXIT DEVICES)

ANSI/BHMA A156.24 – 1999

The following are Licensee’s Catalog Designations of locks (exit devices) meeting the requirements of ANSI/BHMA A156.24 for Delayed Egress Locks. Rim Device: ED4200D, ED4200SD, ED5200D, ED5200AD, ED5200SD, ED5200SAD Mortise: ED5600D, ED5600AD Concealed Vertical Rod: ED4800D, ED5800D, ED5800AD, ED5860D, ED5860BD Surface Vertical Rod: ED4400D, ED5400D, ED5400AD, ED5470D, ED5470BD Electrical Options for above: M88 NFPA 30 Second Delay M89 BOCA 15 Second Delay M90 BOCA 30 Second Delay M91 Bolt Monitor M93 Trim Monitor SAF Electric Trim Control (fail safe) – Mortise only SEC Electric Trim Control (fail secure) – Mortise only Notes: The “D” suffix indicates delayed egress.

CERTIFIED FINISHES






Dark oxidized satin bronze, oil rubbed 613






317




CERTIFIED DELAYED EGRESS LOCKS The following are licensee’s Catalog Designations of the locks (exit devices) meeting the requirements of ANSI/BHMA A156.24, 2003 for Delayed Egress Locks. Device Type Delayed Egress Device Series Rim 10, F10, V4000, FV4000, V40, FV40 followed by EE Surface Vertical Rod 20, F20, 21, F21 followed by EE Mortise 30, F30 followed by EE Narrow Rim 40, F40, V40, FV40 followed by EE Narrow Surface Vertical Rod 50, F50, 51, F51 followed by EE Available options:

30 = 30 Second Time Delay CD = Cylinder Dogging (not available on F models) H = Hurricane Rated (see NOA listings for available models/pressures) 120/24 VAC transformer or 80-800 power supply Certified Finishes Finish Type (ANSI/BHMA) Licensee’s Symbol(s)

Bright Brass plate, PVD 605 Satin Brass Plate, PVD 606 Bright Bronze plate, PVD 611 Satin Bronze Plate, PVD 612 Oxidized Satin Bronze, PVD 613 Bright Stainless Steel 629 Brushed Stainless Steel 630


318


DEXTER, MI 48130 800-742-3634

DELAYED EGRESS LOCKS CERTIFIED TO A156.24 1999 DELAYED POWER ELECTRO- RESET REQUEST TO EXIT EGRESS SUPPLY W/ MAGNETIC DEVICE DEVICE SYSTEM TIMER LOCK One of: One of: DES-1 PS17-TD2 1401 210N x LED PANNEX 120A x 30 DES, or or PANNEX 1200A x 30 DES, or DES-1-15 PS17-TD2-15 1401 210 x LED PANNEX 1300A x 30 DES DELAYED POWER ELECTRO- RESET REQUEST TO EXIT EGRESS SUPPLY W/ MAGNETIC DEVICE DEVICE SYSTEM TIMER LOCK One of: One of: DES-1F PS17-TD2 1401 210N x LED PANNEX 1200F x 30 DES, or or 210 x LED PANNEX 1300F x 30 DES DES-1F-15 PS17-TD2-15 1401 CERTIFIED FINISHES LICENSEE’S SYMBOL Clear Anodized Aluminum 28 Duranodic 313


319



CERTIFIED DELAYED EGRESS LOCKS

A156.24 2003

LOCKS WITH SELF-CONTAINED DELAYED EGRESS ELECTRONICS

1500 lbf Ranking Magnetic Locks: EMDE-1011MS, EMDE-1011MT Options for above locks: BA Magnetic Bond Sensor DPS Door Position Switch ATS Access Cover Tamper Switch

CERTIFIED FINISHES Finish Type Licensee Symbols Clear Anodized Aluminum 628/628 Duranodic Bronze 710/313 Delayed Egress Exit Devices: DE9100, DE5100 Concealed Vertical Rod DE9300, DE5300 Rim DE9500, DC5500 Mortise

CERTIFIED FINISHES Finish Type Licensee Symbols Clear Coated Brass 605E/605, 606E/606 Clear Coated Bronze 611E/611, 612E/612 Bronze, Chrome Plated 625E/625, 626E/626 Clear Anodized Aluminum 628 Stainless Steel 630


320

Locknetics Security Engineering 575 Birch Street

Forestville, CT 06010 860.584.9158

Certified Delayed Egress Locks – A156.24

LOCKS WITH SELF-CONTAINED DELAYED EGRESS ELECTRONICS Licensee’s Catalog 1500 lbf Ranking 1000 lbf Ranking 500 lbf Rankin Designations 101+, 101+-2, 390DEL/DLS, 390-2DEL/DLS

All of the above are UL listed. All are dual voltage, i.e., 12/24VDC.

Options Available with Above Delayed Egress Locks: DSM – Door status Monitor MBS – Magnetic Bond Sensor SEC – Security Alarm BOCA/SEC – BOCA Code Feature ATR – Audit Trail ATS – Anti-Tamper Switch HDB – Herculite Door Bracket

CONTROLLERS WITH SELF-CONTAINED DELAYED EGRESS Licensee’s Catalog Designations CT1000 Hardwired, Universal Controller


321

Stanley Security Solutions, Inc. – Precision Hardware 6161 East 75th Street,

Indianapolis, IN 46250 800.711.6814

Certified Delayed Egress Exit Devices ANSI/BHMA 156.24

Following are Precision Hardware exit device products certified to meet

ANSI/BHMA 156.24 delayed egress locking hardware

Rim …………………….....................2101, 2102, 2103, 2105, 2108, 2114, and 2115 Surface Vertical Rod ………………2201, 2202, 2203, 2205, 2208, 2214, and 2215 Mortise…………………. ……………2301, 2302, 2303, 2305, 2308, 2314, and 2315 Narrow Rim…………………………..2401, 2402, 2403, 2414, 2408 Narrow Concealed Vertical Rod …2601, 2602, 2603, 2614, and 2608 Wood Door Concealed ……………2701, 2702, 2703, 2705, 2708, 2714, and 2715 Metal Door Concealed……………..2801, 2802, 2803, 2805, 2808, 2814, and 2815 DE – Prefix indicates Delayed Egress Available with 15 second delay standard. 30 second delay available when accompanied with letter from AHJ – Authority Having Jurisdiction Additional options available for use with Delayed Egress: FL – Fire Label DS – Door Position Switch LS, LDS – Latch-Bolt Monitoring E – Electric Lock/Unlock Trim HC –Hurricane Compliance Available Finishes: 605, 606, 612, 613, 625, 626, 628, and 630


322


NEW HAVEN, CT 06511 800/727-5477

A156.24 1999


ANSI/BHMA Licensee’s Catalog Designation Type Number 1200 LBF Ranking E08501 1584, 1585, 1586, 1587 Dual Voltage 12VDC and 24VDC The following are Licensee’s Catalog Designations of locks meeting the requirements of ANSI/BHMA A156.24-1999 for Delayed Egress Locks: 3671 Controller with 4375LH Keyswitch, 1584, 1585 or 1586, 1587 Electromagnetic Lock, 3510 Power Supply and any 55-80 Series Exit Device. Electroguard™ Exit Devices: 59-8300/12-59-8300 Mortise, 59-8400 Concealed Vertical Rod, 12-59-MD8400 Concealed Vertical Rod, 59-8500 Rim, 59-MD8600/12-59- MD8600 Concealed Vertical Rod, 59-WD8600/12-59-WD8600 Concealed Vertical Rod, 59-8700/12-59-8700 Surface Vertical Rod, 59-8800/12-59-8800 Rim, and 59-8900/12- 59-8900 Mortise. Delayed Egress Exit Devices: 57-80 Series Exit Device with 3510 Power Supply and 1584, 1585, 1586 or 1587 Electromagnetic Lock.

CERTIFIED FINISHES FOR DELAYED EGRESS LOCKS Finish Type Licensee’s Catalog Designations Polished Brass US3 (605) Satin Brass US4 (606) Polished Bronze US9 (611) Satin Bronze US10 (612) Oxidized Satin Bronze, oil rubbed 10B (613) Oxidized Satin Bronze, clear powder coat 10BL Dark Statuary Bronze, lacquered 20D Polished Stainless Steel 32 (629) Satin Stainless Steel 32D (630) Powder Coated to match 10B PEB Powder Coated to match US28 PEN Sprayed to match 20D PED


323

3580 Willow Lane, Westlake Village, CA 91361-4921 P.O. Box 6219, Westlake Village, CA 91359-6219 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: [email protected]



LOCKS WITH SELF-CONTAINED DELAYED EGRESS ELECTRONICS

1500 Lbf Ranking 1000 lbf Ranking 500 lbf Ranking MODELS 1511S, 1511T All the above are UL listed. All are dual voltage 12 or 24VDC

CERTIFIED FINISHES

Finish Type Licensee Symbols Anodized Aluminum (V) 628 Duronodic (X) 313


324

VON DUPRIN


INDIANAPOLIS, IN 46219 317-613-8944


The following Licensee’s catalog designations of locks meeting the requirements of ANSI/BHMA A156.24 (2003) for Delayed Egress Locks. DE5101 Exit Control CHEXIT® Controlled Exit Devices: CX33A Rim, CX98 Rim, CX98-F Rim, CX99 Rim, CX99-F Rim. CX9875, CX9875-F, CX9975, CX9975-F, CX9827, CX9827-F, CX9927, CX9927-F, CX9847, CX9847-F, CX9947, CX9947-F, CX9847WDC, CX9847WDC-F, CX9947WDC, CX9947WDC-F, CX9848, CX9848-F, CX9948, CX9948-F, CX9857, CX9857-F, CX9957 and CX9957-F.

Certified Finishes for Delayed Egress Locks Finish Type Licensee’s Symbol(s) Brass, with an Organic Coating US3, US4 Bronze, with an Organic Coating US9, US10 Bronze, Dull Oxidized and Oil Rub US10B Chrome on Brass, Bronze or Zinc US26, US26D Anodic Coating on Aluminum US28, US10AN, 313AN, 315AN Stainless Steel, 300 Series US32, US32D Paint/Powder Coatings US19, SP28, SP313, SPBLK


325

YALE COMMERCIAL LOCKS & HARDWARE 1902 Airport Road Monroe, NC 28110

(704) 283-2101

CERTIFIED DELAYED EGRESS LOCKS (EXIT DEVICES) ANSI/BHMA A156.24 – 1999

The following are Licensee’s Catalog Designations of locks (exit devices) meeting the requirements of ANSI/BHMA A156.24 for Delayed Egress Locks. Rim Device: 7100D, 7100FD, 7150D, 7150FD, 7200D, 7200MD, 7200MFD, 7250D, 7250MD, 7250MFD Mortise: 7130D, 7130FD Concealed Vertical Rod: 7120D, 7120FD, 7220D, 7220MD, 7220MFD, 7160D, 7160FD Surface Vertical Rod: 7110D, 7110FD, 7170D, 7170FD, 7210FD Electrical Options for above: “C” – thirty second delay – “BOCA” “H” – security monitor – Rim only “O” – trim monitor – All series “S” – latchbolt monitor – All series “SAFE” – electric unlock (fail safe) – Mortise only “SECURE” – electric lock (fail secure) – Mortise only Notes: The “D” suffix indicates delayed egress.

CERTIFIED FINISHES

Finish type (ANSI/BHMA): Licensee’s Symbol(s) Bright brass, clear coated 605 Satin brass, clear coated 606 Bright bronze, clear coated 611 Satin bronze, clear coated 612 Dark oxidized satin bronze, oil rubbed 613 Bright chrome plated 625 Satin chrome plated 626 Bright stainless steel 629 Satin stainless steel 630 Aluminum painted 689 Light bronze painted 691 Dark bronze hardcoat 695

Electrified Locking Devices

ANSI/BHMA A156.25

2009 DIRECTORY

Electrified Locking D

evices


327

GENERAL INFORMATION Readers are encouraged to obtain copies of ANSI/BHMA A156.25 for complete information. EXPLANATION OF TYPE NUMBERS Three sets of characters are used to define the product as shown below: For example L1 – A156.13 F05 G1 – E05, E07 The first two characters are for environmental type and voltage (example L1): F denotes Full Outdoor Type 1 denotes High Voltage Wired N denotes Full Indoor Type 2 denotes Low Voltage Wired L denotes Locked Outdoor Type 3 denotes Low Voltage Stand-alone U denotes Locked Indoor Type The second set of characters contains the mechanical product standard number, function (where applicable) and grade (example A156.13 F05 G1) The third set of characters are used to designate additional specialized electrical functions from the following list (example E05, E06). These identifiers may also be used separately for mechanical products with only these added features.

E01 Exit Switch - monitors actuating bar position. Sometimes called Request to Exit, or REX.

E02 Latch Position Switch - monitors latch bolt or deadlocking actuator position

E03 Electric Dogging - When energized, upon manually depressing the actuating bar, the latch bolt or deadbolt remains retracted until remotely released.

E04 Electric Latch Retraction - When energized, the latch bolt or deadbolt retracts until remotely released. The retraction may be energized for extended periods.

E05 Electric Locking (Fail Safe)

E06 Electric Unlocking (Fail Secure)

E07 Cylinder Monitoring

E08 Door Position Sensors

E09 Wireless Communications

E10 Power over Ethernet (PoE)


328

Kaba ILCO Corporation 2941 Indiana Avenue

Winston-Salem, NC 27105 336-725-1331

www.kaba-ilco.com

ELECTRIFIED LOCKING DEVICES ANSI/BHMA A156.25-2002

Certified for Compliance to ANSI/BHMA A156.25 – 2002 with:

A156.2 Bored & Preassembled Locks & Latches A156.3 Exit Trim A156.13 Mortise Locks & Latches


F04, F07, F08, F10, F15, F81, F86 Series E5000, E5200, E5700

CERTIFIED FINISHES Satin Chrome over zinc 626E Bright Chrome over zinc 625E

Satin Brass over zinc 606E Bright Brass over zinc 605E

Black Powder Paint over zinc 676 Duranodic – Dark Bronze 695


F86 Powerlever Series: 1550S, 1550I, 4550S, 4550I, 4560S, 4560I, 9550S, 9550I

CERTIFIED FINISHES

Black- Wrinkle Polyester Powder Coat over E-coat

BL

Satin Chrome over zinc (26D or 626E) CR


329

7301 Decarie Blvd. Montreal Q.C. Canada

H4P 2G7 514-735-5410

www.kaba-ilco.com

Electrified Locking Devices

BHMA / ANSI A156.25 2007

Certified for Compliance to A156.25 2007 Grade 1 With Mortise Locks & Latches

Lock Type

Mechanical Standard / Function / Grade

Licensee’s Catalog Description Optional Features

L3 A156.13-2005 F01 G1 71x series E07, E09 L3 A156.13-2005 F04 G1 71x series E07, E09 L3 A156.13-2005 F07 G1 71x series E07, E09 L3 A156.13-2005 F08 G1 71x series E07, E09 L3 A156.13-2005 F10 G1 71x series E07, E09 L3 A156.13-2005 F15 G1 71x series E07, E09 L3 A156.13-2005 F20 G1 71x series E07, E09 L3 A156.13-2005 F21 G1 71x series E07, E09 F3 A156.13-2005 F01 G1 76x series E07, E09 F3 A156.13-2005 F04 G1 76x series E07, E09 F3 A156.13-2005 F07 G1 76x series E07, E09 F3 A156.13-2005 F08 G1 76x series E07, E09 F3 A156.13-2005 F10 G1 76x series E07, E09 F3 A156.13-2005 F15 G1 76x series E07, E09 F3 A156.13-2005 F20 G1 76x series E07, E09 F3 A156.13-2005 F21 G1 76x series E07, E09 F3 A156.13-2005 F01 G1 77x series E07, E09 F3 A156.13-2005 F04 G1 77x series E07, E09 F3 A156.13-2005 F07 G1 77x series E07, E09 F3 A156.13-2005 F08 G1 77x series E07, E09 F3 A156.13-2005 F10 G1 77x series E07, E09 F3 A156.13-2005 F15 G1 77x series E07, E09 F3 A156.13-2005 F20 G1 77x series E07, E09 F3 A156.13-2005 F21 G1 77x series E07, E09 F3 A156.13-2005 F01 G1 79x series E07, E09 F3 A156.13-2005 F04 G1 79x series E07, E09 F3 A156.13-2005 F07 G1 79x series E07, E09 F3 A156.13-2005 F08 G1 79x series E07, E09 F3 A156.13-2005 F10 G1 79x series E07, E09 F3 A156.13-2005 F15 G1 79x series E07, E09 F3 A156.13-2005 F20 G1 79x series E07, E09 F3 A156.13-2005 F21 G1 79x series E07, E09


330

Kaba Ilco Inc. (continued) BHMA/ANSI A156.25-2007 Note: 76x series, 77x series, 79x series with ASM mortise 71x series with AMM mortise

(x represents any alphanumeric character in all above lock names)

Key: F3 Conforms to “Full Outdoor Type” environmental tests for “stand-alone low voltage” electrified locking devices. L3 Conforms to “Locked Side Outdoors” environmental tests for “stand-alone low voltage” electrified locking devices. E07 Cylinder Monitoring – When optional mechanical override cylinder is used, key use is recorded in memory. E09 Wireless Communication – Optional RF or IR modules for wireless access controls in interoperative environments.

CERTIFIED FINISHES


Satin chromium plated over nickel 626 E (26D)


331


ELECTRIFIED LOCKING DEVICES

ANSI/BHMA 156.25, 2002

Certified for Compliance to ANSI/BHMA 156.25, 2002 with mortise lock and trim compliant to ANSI/BHMA 156.13, 2005, and certified for Operational Grade 1 & Security Grade 1.

ANSI Function Number Licensee’s Catalog Descriptions

F01 HT24/HT28 F04 HT24/HT28 F08 HT24/HT28 F10 HT24/HT28 F15 HT24/HT28 F21 HT24/HT28

CERTIFIED FINISHES



332



ANSI/BHMA 156.25, 2002


ANSI Function Number Licensee’s Catalog Descriptions

F01 HT ADVANCE F04 HT ADVANCE F08 HT ADVANCE F10 HT ADVANCE F15 HT ADVANCE F21 HT ADVANCE

CERTIFIED FINISHES



333



ANSI/BHMA 156.25, 2002



F01 CT SERIES F04 CT SERIES F07 CTSERIES F08 CT SERIES F10 CT SERIES F12 CT SERIES F13 CT SERIES F15 CT SERIES F21 CT SERIES

CERTIFIED FINISHES



334

Computerized Security Systems, Inc. d.b.a. SAFLOK 31750 Sherman Ave. Madison Heights, MI 48071 Phone: 248.837-3700 Fax: 248.583.3228 Email: [email protected] Web: www.saflok.com

CERTIFIED ELECTRIFIED LOCKING DEVICES BHMA/ANSI A156.25-2007

All Electrified Locking Devices also Certified to A156.13-2005 Standard for Mortise Locks and Latches: Operational Grade One and Security Grade One

Lock Type


Licensee’s Catalog

Description Optional Features

L3 A156.13-2005 F01 G1 SAFLOK MT E02, E09 L3 A156.13-2005 F04 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F05 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F08 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F10 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F15 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F20 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F21 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F27 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F28 G1 SAFLOK MT E02, E03, E07, E09 L3 A156.13-2005 F01 G1 Odyssey E02, E09 L3 A156.13-2005 F04 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F05 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F08 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F10 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F15 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F20 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F21 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F27 G1 Odyssey E02, E03, E09 L3 A156.13-2005 F28 G1 Odyssey E02, E03, E09


335

Computerized Security Systems (continued) BHMA/ANSI A156.25-2007

Lock Type


Licensee’s Catalog

Description Optional Features

L3 A156.13-2005 F01 G1 Quantum MT E02, E09 L3 A156.13-2005 F04 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F05 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F08 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F10 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F15 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F20 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F21 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F27 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F28 G1 Quantum MT E02, E03, E09 L3 A156.13-2005 F01 G1 Quantum RFID E02, E09 L3 A156.13-2005 F04 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F05 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F08 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F10 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F15 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F20 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F21 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F27 G1 Quantum RFID E02, E03, E09 L3 A156.13-2005 F28 G1 Quantum RFID E02, E03, E09

Key: L3 Conforms to “Locked Side Outdoors” environmental tests for “stand-alone low voltage”

electrified locking devices.

E02 Latch Position Switch – Monitors latch position and looks for door left ajar. Logs condition in memory and also transmits condition when wireless option is employed.

E03 Electric Dogging – Use latch/unlatch key or preset schedule to dog door open during passage periods.

E07 Cylinder Monitoring – When optional mechanical override cylinder is used, key use is recorded in memory.

E09 Wireless Communication – Optional RF or IR modules for wireless access controls in interoperative environments.

Continuous Hinges

ANSI/BHMA A156.26

2009 DIRECTORY

Continuous H

inges


337



338

A156.26 – 2006 CONTINUOUS HINGES

ANSI PART #


A156.26 #951 Full Mortise Continuous Hinge 1-150 CH951 Stainless Steel A156.26 #952 Full Wrap Edge Guard

Continuous Hinge 1-150 CH952 Stainless Steel A156.26 #953 Half Wrap Edge Guard

Continuous Hinge 1-150 CH953 Stainless Steel A156.26 #954 Half Mortise Continuous Hinge 1-150 CH954 Stainless Steel A156.26 #956 Swing Clear Continuous Hinge 1-150 CH956 Stainless Steel A156.26 #957 Full Surface Continuous Hinge 1-150 CH957 Stainless Steel VERIFICATION REPORT NUMBERS: GZ07120129-1 JGZ0611103-1 SUBSECTION TEST DESCRIPTION RESULT 6.2 Overload Test Compliant 6.3 Abuse Test Compliant 6.4 Cycle Test Compliant POST CYCLE TEST 6.5 Overload Test Compliant 6.6 Abuse Test Compliant 6.7 Vertical Wear Test Compliant 6.8 Lateral Wear Test Compliant ULC LISTED


339


St. Louis, MO 63104 1-800-255-3590

www.hagerco.com

A156.26 - 2006 Continuous Hinges 2.1.3 Edge Mounted – Gear Type (2.1.2) - Aluminum ANSI Part # Hinge Type Grade Hager Part # A31011G 1/8” Inset, 1-15/16” Frame Leaf 1 – 150 780-111 A31011G 1/8” Inset, 1-15/16” Frame Leaf, Heavy Duty 1 – 150 780-111HD A31011G 1/8” Inset, 1-15/16” Frame Leaf, LL* Door Model 1 – 150 780-111LL A31011G Flush Inset, 1-9/16” Leaves 1 – 150 780-112 A31011G Flush Inset, 1-9/16” Leaves, Heavy Duty 1 – 150 780-112HD A31011G Flush Inset, 1-9/16” Leaves, LL Door Model 1 – 150 780-112LL A31011G 1/16” Inset, “Safety Hinge” 1 – 150 780-113 A31011G 1/16” Inset, Heavy Duty, “Safety Hinge” 1 – 150 780-113HD A31011G 3/32” Inset, Door Edge Lip 1 – 150 780-224 A31011G 3/32” Inset, Heavy Duty, Door Edge Lip 1 – 150 780-224HD A31011G 3/32” Inset, Door Edge Lip, LL Door Model 1 – 150 780-224LL A31011G Flush Inset, 1-15/16” Leaves for ≥ 2” Doors 1 – 150 780-226 A31011G Flush Inset, 1-15/16” Leaves, Heavy Duty 1 – 150 780-226HD A31011G Flush Inset, 1-15/16” Leaves, LL Door Model 1 – 150 780-226LL A31021G 1/8” Inset, 1-15/16” Frame Leaf, Heavy Duty 1 – 300 780-111HD A31021G 1/8” Inset, 1-15/16” Frame Leaf, LL Door Model 1 – 300 780-111LL A31021G Flush Inset, 1-9/16” Leaves, Heavy Duty 1 – 300 780-112HD A31021G Flush Inset, 1-9/16” Leaves, LL Door Model 1 – 300 780-112LL A31021G 1/16” Inset, Heavy Duty, “Safety Hinge” 1 – 300 780-113HD A31021G 3/32” Inset, Heavy Duty, Door Edge Lip 1 – 300 780-224HD A31021G 3/32” Inset, Door Edge Lip, LL Door Model 1 – 300 780-224LL A31021G Flush Inset, 1-15/16” Leaves, Heavy Duty 1 – 300 780-226HD A31021G Flush Inset, 1-15/16” Leaves, LL Door Model 1 – 300 780-226LL


340

Hager Companies (Continued) A156.26 - 2006 Continuous Hinges 2.1.4 Full Surface – Gear Type (2.1.2) – Aluminum ANSI Part # Hinge Type Grade Hager Part # A33011G Standard Bi-Fold Application Hinge 1 – 150 780-057 A33011G Heavy Duty Bi-Fold Application Hinge 1 – 150 780-057HD A33011G 1/16” Inset, 7/8” Min. Frame Face 1 – 150 780-157 A33011G 1/16” Inset, 7/8” Min. Frame Face, Heavy Duty 1 – 150 780-157HD A33011G 1/32” Inset, 1-5/8” Min. Frame Face 1 – 150 780-210 A33011G 1/32” Inset, 1-5/8” Min. Frame Face, Heavy Duty 1 – 150 780-210HD A33021G Heavy Duty Bi-Fold Application Hinge 1 – 300 780-057HD A33021G 1/16” Inset, 7/8” Min. Frame Face, Heavy Duty 1 – 300 780-157HD A33021G 1/32” Inset, 1-5/8” Min. Frame Face, Heavy Duty 1 – 300 780-210HD 2.1.6 Half Surface – Gear Type (2.1.2) - Aluminum ANSI Part # Hinge Type Grade Hager Part # A34011G 9/32” Inset, 1-9/16” Frame Leaf 1 – 150 780-045 A34011G 9/32” Inset, 1-9/16” Frame Leaf, Heavy Duty 1 – 150 780-045HD A34011G 9/32” Inset, 1-15/16” Frame Leaf 1 – 150 780-046 A34011G 9/32” Inset, 1-15/16” Frame Leaf, Heavy Duty 1 – 150 780-046HD A34011G 1/8” Inset, 1-9/16” Frame Leaf 1 – 150 780-053 A34011G 1/8” Inset, 1-9/16” Frame Leaf, Heavy Duty 1 – 150 780-053HD A34011G 1/8” Inset, 1-15/16” Frame Leaf 1 – 150 780-054 A34011G 1/8” Inset, 1-15/16” Frame Leaf, Heavy Duty 1 – 150 780-054HD A34011G Center Hung, Double Egress Application 1 – 150 780-155 A34011G Center Hung, Double Egress, Heavy Duty 1 – 150 780-155HD A34011G 1/16” Inset, 1-15/16” Frame Leaf, Swing Clear 1 – 150 780-211HD A34011G Center Hung, Double Egress, Long Reach 1 – 150 780-213 A34011G Center Hung, Double Egress, Long Reach, HD 1 – 150 780-213HD A34011G 1/8” Inset, 3/4” Frame Leaf 1 – 150 780-259 A34011G 1/8” Inset, 3/4” Frame Leaf, Heavy Duty 1 – 150 780-259HD A34021G 9/32” Inset, 1-9/16” Frame Leaf, Heavy Duty 1 – 300 780-045HD A34021G 9/32” Inset, 1-15/16” Frame Leaf, Heavy Duty 1 – 300 780-046HD A34021G 1/8” Inset, 1-9/16” Frame Leaf, Heavy Duty 1 – 300 780-053HD A34021G 1/8” Inset, 1-15/16” Frame Leaf, Heavy Duty 1 – 300 780-054HD A34021G Center Hung, Double Egress, Heavy Duty 1 – 300 780-155HD A34021G 1/16” Inset, 1-15/16” Frame Leaf, Swing Clear 1 – 300 780-211HD A34021G Center Hung, Double Egress, Long Reach, HD 1 – 300 780-213HD A34021G 1/8” Inset, 3/4” Frame Leaf, Heavy Duty 1 – 300 780-259HD *HD denotes Heavy Duty hinge. LL denotes Heavy Duty hinge with double row of screws to straddle lead in lead lined doors.


341

H.B.IVES INGERSOLL RAND SECURITY TECHNOLOGIES

50 IVES PLACE NEW HAVEN, CT. 60511

(203)772-4837

CERTIFIED CONTINUOUS HINGES The following are the Licensee’s catalog designations for products meeting the requirements of ANSI/BHMA A156.26 - 2006 for Continuous Hinges. 2.1.3 – Edge Mounted Gear Type (2.1.2) Aluminum – Grade 1 Model: 112, 224 2.1.4 – Full Surface Mounted Gear Type (2.1.2) Aluminum – Grade 1 Model: 157, 210

CERTIFIED FINISHES Finish Type Licensee’s Symbol Anodic Coating on Aluminum US28, 313AN


342

Markar Architectural Products 260 Santa Fe Street Pomona, CA 91767

(800) 872-3267 CERTIFIED MODELS LISTED AS CONFORMING TO ANSI/BHMA A156.26-2006 FOR CONTINUOUS HINGES: 2.1.3 Edge Mounted – Barrel Type (2.1.1)

• Grade 1 Stainless Steel – FM300 Models, HG-300 Models, FM-3500 Models, HG-3500 Models

• Grade 2 Steel – FM-200 Models • Grade 2 Aluminum – FM-100 Models, HG-100 Models

2.1.4 Full Surface – Barrel Type (2.1.1)

• Grade 1 Stainless Steel – FS-300 Models, FS-3500 Models • Grade 2 Steel – FS-200 Models • Grade 2 Aluminum – FS-100 Models

2.1.5 Half Edge Mounted – Barrel Type (2.1.1) • Grade 1 Stainless Steel – HM-300 Models, HG-300 Models

2.1.6 Half Surface – Barrel Type (2.1.1) • Grade 1 Stainless Steel – HS-300 Models, HG-300 Models • Grade 2 Steel – HS-200 Models, HS-100 Models

2.1.7 Half Surface (3/4 Offset) – Barrel Type (2.1.1) • Grade 1 Stainless Steel – HG-300 Models

2.1.8 Raised Barrel – Barrel Type (2.1.1) • Grade 1 Stainless Steel – Optional for FM-300 Models, FS-300 Models, HS-300

Models, HM-300 Models, HG-300 Models, HS-300 Models, FM-3500 Models, FS-3500 Models, HG-3500 Models

• Grade 2 Steel – Optional for FM-200 Models, FS-200 Models, HS-200 Models 2.1.9 Swing Clear – Barrel Type (2.1.1) –

• Grade 1 Stainless Steel – FS/SC-300 Models, Optional for FM-300 Models and selected HG-300 Models

• Grade 2 Steel – Optional for FM-200 Models, FS-200 Models, HS-200 Models


343

PEMKO MANUFACTURING COMPANY CERTIFIED CONTINUOUS HINGE

5535 Distribution Drive Memphis, TN 38141

(901) 365-2160 www.pemko.com

ANSI / BHMA A156.26-2000

Rev: 9-30-03 2.1.3 Edge Mounted – Gear Type (2.1.2) – Aluminum – Grade 1 Pemko “FM” Series Full Mortise Hinges CFM, DFM, GFM, KCFM, KDFM, KGFM, CFMSLF, DFMSLF, GFMSLF CFMSLI, DFMSLI, CFMSF, DFMSF, CFMSLISF, DFMSLISF, CSPFM, DSPFM, CSPFMSLF, DSPFMSLF, CSPFMSLI, DSPFMSLI, WTCFM, WTDFM, CRS, DRS, GRS. 2.1.4 Full Surface – Gear Type (2.1.2) – Aluminum – Grade 1 Pemko “FS” Series Full Surface Hinges CFS, DFS, GFS, CFSCP, DFSCP, GFSCP 2.1.6 Half Surface – Gear Type (2.1.2) – Aluminum – Grade 1 Pemko “HS” Series Half Surface Hinges CHS, DHS, GHS, CHSSF, DHSSF, 2.1.8 Raised Barrel – Gear Type (2.1.2) – Aluminum – Grade 1 Pemko “FM” Series Raised Gear Hinges CFMRG, DFMRG


344

SELECT HINGES 9770 Shaver Road, Portage MI 49024 Ph: 800-423-1174 Fax: 800-423-7107

www.select-hinges.com

ANSI/BHMA A156.26-2000 Certified Continuous Hinges

2.1.3 Edge Mounted-Gear Type (2.1.2) Aluminum – Grade 1 Select Hinge Part Number: SL11XD, SL24XD


345

Stanley Security Solutions, Inc. Commercial Hardware

6161 East 75th Street Indianapolis, IN 46250 Phone: (800) 311-1705

www.stanleycommercialhardware.com

A156.26-2006 Continuous Hinges

ANSI part# hinge type grade Stanley part # base material 2.1.3 Barrel Type (2.1.1)Edge Mounted 1 651 Stainless Steel

2.1.3 Barrel Type (2.1.1)Edge Mounted/ 1 652 Stainless Steel Full Wrap

2.1.3 Barrel Type (2.1.1)Edge Mounted/ 1 653 Stainless Steel Half Wrap

2.1.3 Barrel Type (2.1.1)Edge Mounted 1 641 Steel

2.1.3 Barrel Type (2.1.1)Edge Mounted/ 1 643 Steel Half Wrap

2.1.4 Barrel Type (2.1.1)Full Surface 1 657 Stainless Steel

2.1.4 Barrel Type (2.1.1)Full Surface 1 647 Steel

2.1.5 Barrel Type (2.1.1)Half Mortise 1 654 Stainless Steel

2.1.5 Barrel Type (2.1.1)Half Mortise 1 644 Steel

2.1.5 Barrel Type (2.1.1)Half Mortise/ 1 655 Stainless Steel Guard

2.1.5 Barrel Type (2.1.1)Half Mortise/ 1 645 Steel Guard

2.1.9 Barrel Type (2.1.1)Swing Clear 1 656 Stainless Steel

2.1.9 Barrel Type (2.1.1)Swing Clear 1 646 Steel

http://www.stanleycommercialhardware.com/�

Exit Locks, Alarms

ANSI/BHMA A156.29

2009 DIRECTORY

Exit Locks, Alarm

s


347

GENERAL INFORMATION This information is included in the Director as an aid to the user. Readers are cautioned not to rely on this information as describing total requirements and are urged to obtain copies of ANSI/BHMA 156.29 and other Standards referenced therein for complete information. FUNCTION AND TYPE NUMBERS Explanation of Type Numbers First letter denotes original BHMA Product section “E”. First numeral indicates general or trim material used. 0 - Optional material The second numeral for the products covered identifies the type of product. Exit Alarms and Exit Locks are identified by the numeral “4”. The third numeral is the device function. Outside Trim Functions for Exit Locks, Exit Locks with Exit Alarms, Exit Alarms, Alarms for Exit Devices 1. Exit only. No outside operation. 2. Key retracts latch bolt. May be used with lever, knob or pull. Activating key will cause unit to start delay feature for authorized egress. 3. Key locks or unlocks knob or lever. Activating key will cause unit to start delay feature for authorized egress. 4. No outside cylinder. Knob or lever is always operative. Activating knob will sound alarm. Activating key will cause unit to start delay feature for authorized egress. The fourth numeral is the Grade. Example: E0411 E – Section - (E) 0 – Material (Optional) 4 – Type of Product (Exit Lock) 1 – Device Functions (see descriptions in Section 8) 1 – Grade (Grade 1) For outside trim functions for exit devices with alarms see ANSI/BHMA A156.3 for Exit Devices.


348




CERTIFIED EXIT ALARMS The following are licensee’s Catalog Designations of Exit Alarms meeting the requirements of ANSI/BHMA A156.29, 2001 for Exit Locks, Exit Locks with Exit Alarms, Exit Alarms, Alarms for Exit devices. Type Alarm series Stand alone alarm (door mounted) EAX 500, EAX 500W Stand alone alarm (wall mounted)* EAX 2500 *This series is approved for optional AC/DC external power (Flush or Surface mounted)

Available options:

W = Weatherized KS = Key Stop MC65 = Mortise Cylinder – pre-installed IC7-7 = Interchangeable Core Housing – pre-installed Finish Options Licensee’s Symbol(s)

Gray GY Black BK

http://www.detex.com/�

High Security Cylinders

Products

ANSI/BHMA A156.30

2009 DIRECTORY

High Security

Cylinders Products


350

GENERAL INFORMATION This standard includes security performance based requirements for both mechanical and electrified high security cylinders. For the purpose of this standard, High Security Cylinder includes mechanical lock cylinders, electromechanical cylinders, and the electronic lock sub assemblies that are analogous to the cylinder assemblies. Cylinders include their keys or electronic credentials; their detainers (mechanical pins, levers, discs) or electronic control device; and their cylinder tailpiece or cam or electronic output port. Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions. Levels Manufacturers shall indicate the high security level of their cylinders. Cylinders shall meet all the tests for their level listing. Levels indicate special security features and are separate from Grades. A lockset mated with a cylinder having no Grade listing, even though the cylinder has a high security level is considered ungraded. Grades To obtain cylinder Grade listings, and for the mating lock to retain its Grade listing, cylinders must be tested in accordance with ANSI/BHMA A156.5 for Auxiliary Locks and Associated Products. Assemblies take the grade of the lowest graded component. Electrified products shall also meet the requirements of A156.25 for Electrified Locking Devices to obtain a grade listing. EXPLANATION OF IDENTIFYING NUMBERS FOR SECURITY LEVELS The first Character is the letter M signifying BHMA Section M for High Security Cylinders The second character signifies the Grade per ANSI/BHMA A156.5, or A156.25, 0 (none), 1, 2 or 3. The third character signifies the Key Control Level Category A, B, or C. The fourth character signifies the Destructive Test Level Category A, B, or C. The fifth character signifies the Surreptitious Entry Resistance Level Category A, B, or C. To declare level “A”, all features within the category must achieve level “A”. To declare level “B”, all features within the category must achieve at least a “B”; similar for Category “C”. The minimum listing requires at least a “C” in each category. The Suffix E (electrical) or M (mechanical) is applied to denote the type of cylinder. EXAMPLE: M1ACAE is a grade 1 electrical cylinder meeting levels A, C, and A respectively.


351

Medeco High Security Locks 3625 Allegheny Dr. Salem, VA 24153 (540) 380-5000

CERTIFIED HIGH SECURITY CYLINDERS ANSI/BHMA A156.30 2003

ANSI Function Numbers Licensee’s Catalog Designations Security Level

E09211A 10T Series Mortise M1AAAM

E09221A 10T Series Rim M1AAAM

11T Deadbolt Cylinders M1AAAM

E09231A 20T Series M1AAAM

E09241A 32T Series M1AAAM

Electric Strikes and Frame

Mounted Actuators

ANSI/BHMA A156.31

2009 DIRECTORY

Electric Strikes and Fram

e Mounted

Actuators


353

GENERAL INFORMATION

ELECTRIC STRIKES AND FRAME MOUNTED ACTUATORS (A156.31) EXPLANATION OF IDENTIFYING NUMBERS First letter denotes BHMA Product section (E) First numeral indicates general or trim material used: 0 - Optional material 1 - Cast, forged or extruded brass or bronze 2 - Wrought brass or bronze 3 - Cast, forged or extruded aluminum 4 - Wrought aluminum 5 - Stainless steel, 300 series 6 - Malleable iron 7 - Cast iron 8 - Wrought steel 9 - Zinc alloys In this Standard, the first numeral 0 (optional material) has been used. Specifiers who delineate a specific trim material do so by substituting the first numeral 0 as appropriate. Manufacturers' catalogs are consulted to confirm availability. Trim materials most commonly used are aluminum, brass, bronze, 300 series stainless steel and zinc alloy. The second numeral for the products covered identifies the type of product. Frame Mounted Actuators use the numeral “5”. Electric Strikes use the numeral “9”. For products which have passed the optional preload test, add P25, or P15 as applicable, after the grade number. 8.5 Example: E09311P25 E - Section - (E) 0 - Material (Optional) 9 - Type of Product (Electric Strike) 31 - Function (Semi Rim Mounted) 1 - Grade (Grade 1)

P25 – Preload Test Rating


354


(800) 872-3267 MODELS LISTED AS CONFORMING TO ANSI/BHMA A156.31-2007 FOR ELECTRIC STRIKES, GRADE 1, PRELOAD RELEASE RATING P25 AND UL1034-2000:

ANSI Function Numbers Licensee’s Catalog Designation E09321P25 Models 7400, 7401, 7410, 7411, 7430, 7431 & 7440 (Fail Secure) E09311P25 Models 74R1 & 74R2 (Fail Secure) MODELS LISTED AS CONFORMING TO ANSI/BHMA A156.31-2007 FOR ELECTRIC STRIKES, GRADE 1 AND UL1034-2000:

ANSI Function Numbers Licensee’s Catalog Designation E09321 Models 7400, 7401, 7410, 7411, 7430, 7431 & 7440 (Fail Safe) E09311 Models 74R1 & 74R2 (Fail Safe)


355

ADAMS RITE MANUFACTURING CO. (Continued) Notes: 1. All electric strikes are available with latchbolt and locking status monitoring (“M” suffix

example: 7400M).

3. Consult Licensee’s catalog for further information.

CERTIFIED FINISHES Finish Type Licensee’s Symbol(s) Bright Brass - Clear Coated US3 (605) Satin Brass - Clear Coated US4 (606) Bright Bronze - Clear Coated US9 (611) Satin Bronze - Clear Coated US10 (612) Dark Bronze 640, 121 Bright Stainless Steel US32 (629) Satin Stainless Steel US32D (630)

Aluminum - Clear Anodized 628 Aluminum – Dark Bronze Anodized 313 Aluminum - Black Anodized 335 Black 119 Satin Chrome 652

door closer, locks reference guide(1)

Documents

hd 18 inset

tj3510st tj1400st

physical vapor

adams rite

tj3500st tj400st

tj3501st tj4400st

k2 commercial

oil rubbed