daniel j. inman harm buning collegiate professor · daniel j. inman (page 4) chair of 15th biennial...

DANIEL J. INMAN Harm Buning Collegiate Professor Department of Aerospace Engineering Office phone: (734) 936-0102 University of Michigan Cell phone: (540) 230-5679 3049 Francois Xavier Bagnoud Building Email: [email protected] 1320 Beal Avenue Ann Arbor MI 48109-2140 Education: Michigan State University Ph.D. 1980 (Mechanical Engineering) Michigan State University M.A.T. 1975 (Physics) Grand Valley State College B.S. 1970 (Physics) Professional Experience: University of Michigan

Department of Aerospace Engineering 2018- Present Harm Buning Collegiate Professor 2011- 2018 Chair and "Kelly" Johnson Collegiate Professor

Virginia Polytechnic Institute and State University

Department of Mechanical Engineering 2011-Present Adjunct Professor 1998-2011 George R. Goodson Endowed Professor 1997-2011 Director of Center for Intelligent Material Systems and Structures

Department of Aerospace and Ocean Engineering 2005-2011 Affiliate

Department of Mathematics 2000-2011 Adjunct Professor

Department of Engineering Science and Mechanics 2004-2011 Affiliate 1992-1998 Samuel Herrick Endowed Professor 1992-1997 Director, Mechanical Systems Laboratory

University of Bristol, United Kingdom

2009-2020, Brunel Chair in Intelligent Materials and Structures 2020-2023, Honorary Professor

State University of New York at Buffalo Department of Mechanical & Aerospace Engineering 1989-1992 Professor and Chair 1987-1992 Professor 1984-1992 Director, Mechanical Systems Laboratory 1984-1987 Associate Professor 1980-1984 Assistant Professor Garman Systems Incorporated 1987-1996 Founder and President University of Southern California Center for Applied Mathematical Sciences 1989-1992 Adjunct Professor Brown University

Division of Applied Mathematics 1986-1990 Adjunct Professor 1987-1988 Visiting Professor Michigan State University 1979-1980 Graduate Research Assistant 1978-1979 Instructor 1976-1978 Graduate Research Assistant Bell Laboratories, Interconnection Group 1978 (summer) Member of Technical Staff Grand Rapids Educational Park Physics Department 1970-1976 Instructor

Daniel J. Inman ()

Honors The ASME 2015 Rayleigh Lecture Award, ASME Noise Control and Acoustics Division , August 2015. The AIAA Structures, Structural Dynamics and Materials Award, January 2014 Honorary Professorship, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, China, awarded

October 2009 The 2009 Structural Health Monitoring Lifetime Achievement Award, awarded September 2009 The 2009 Dean’s Award for Excellence in Research, Virginia Tech, awarded April 2009 The Mechanical Engineering Distinguished Alumni Award, Michigan State University, awarded May 2008 The 2008 ASME/Boeing Structural Materials Best Paper Award, awarded April 2008 The 2007 ASME J. P. Den Hartog Medal, awarded September 2007 The 2007 ASME Best Paper Award in Structural Dynamics and Control, awarded March 2007 The 2007 DeMichele Award of the Society for Experimental Mechanics, awarded February 2007 The “Benjamin Meaker Visiting Professorship” from the University of Bristol, UK, for visiting during AY 2004-05 and lecturing on smart structures, awarded May 2004 The SPIE 2003 Smart Structures and Materials Lifetime Achievement Award, awarded March 2003 The 2002 H. C. Pusey Best Paper Award, awarded November 2002 The 2002 President’s Award for Research Excellence (Virginia Tech), awarded September 2002 The 2001 Dean’s Award for Excellence in Research (Virginia Tech), awarded May 2001 ASME AIAA SDM Best Paper Award, awarded April 2001 The ASME/Boeing Structural Materials Best Paper Award, awarded April 2000 ASME 2000 Adaptive Structures and Material Systems Prize, awarded April 2000 ASME Distinguished Lecturer, 1995-2004 Fellow of the National Institute of Aerospace, awarded 2004 Fellow of the American Institute of Aeronautics and Astronautics, awarded 2002 Fellow of the International Institute of Acoustics and Vibration (IIAV), awarded 1999 Fellow of the American Academy of Mechanics, awarded 1997 Fellow of the American Society of Mechanical Engineers, awarded 1990 Fellow of the Society of Experimental Mechanics, awarded 2016 Presidential Young Investigator, 1984-1989 (awarded by President Ronald Reagan and administered by the National

Science Foundation) Editorships: Editor-in-Chief of Journal of Intelligent Material Systems and Structures (1999-present) Editor-in-Chief of Shock and Vibration (1999-2011) Editor of Shock and Vibration Digest (1998-2007) Member International Advisory Board: Journal of Aeronautical and Space Sciences (2011-present) Member Editorial Board: Earthquake Engineering and Engineering Vibration (2007-2009) Member Editorial Board: Latin American Journal of Solids and Structures (2003-present) Member Advisory Board: Japanese Society of Mechanical Engineers (JSME) International Journal Series C:

Mechanical Systems, Machine Elements and Manufacturing (2002-2006) Member Editorial Board: Strojnicky casopsis (Journal of Mechanical Engineering, Slovakia) (2003-present) Member Editorial Board: Journal of Vibration and Control (1995-present) Member Editorial Board: BSSM Strain (2002-present) Member Editorial Board: Journal of Systems and Control Engineering, Proceedings of the Institution of

Mechanical Engineers, Part I (1999-present) Member Editorial Board: Smart Materials and Structures (1991-2001) Technical Editor of ASME Journal of Vibration and Acoustics (1990-1999) Associate Editor of Journal of Intelligent Material Systems and Structures (1992-1999) Associate Editor of Mechanics of Machines and Structures (1986-1998) Associate Editor of ASME Journal of Applied Mechanics (1988-1994) Associate Editor of International Journal of Analytical and Experimental Modal Analysis (1986-1990) Associate Editor of ASME Journal of Vibration, Acoustics, Stress and Reliability in Design (1986-1989) Review Boards: State University of New York at Buffalo, Department of Mechanical and Aerospace Engineering, Department Advisory Board, April, 2017 to present

Daniel J. Inman ()

National Academies of Sciences, Engineering and Medicine Panel on Mechanical Sciences and Engineering at the Army Research Laboratory June 2018 Panel on Robotic Materials, Computing Community Consortium (April 2018) Purdue University, School of Aeronautics and Astonuatics Departmental Review Board (Feb 3018) University of Illinois Champange Urbana Department of Aerospace Engineering, Review Board 2017 Khalifa University of Science, Technology and Research (KUSTAR) BsC Aerospace Engineering, Abu Dhabi, United Arab Emirates, Accreditation Renewal (March 2016) University of California Los Angeles, Department of Mechanical and Aerospace Engineering, Senate Review (February, 2016) New York Institute of Technology, Abu Dhabi Campus, United Arab Emirates, Review Board for Initial Accreditation for BS in Mechanical Engineering (January 2015) University of Kansas, Department of Aerospace Engineering, 2013- 2016 Engineering Mechanics Department, Tsinghua University (China), 2010 Engineering and Physical Sciences Research Council’s Peer Review College (United Kingdom), 2006-2009 University of Toronto, Institute for Aerospace Studies External Review Board (1998; 2006) ATO James Webb Space Telescope Review Team (2005) Weapons Engineering and Manufacturing Review Board, Los Alamos National Laboratory (2002-2004) Engineering Science Division Review Board, Los Alamos National Laboratory (1999-2004) Aircraft Morphing Program Peer Review Team, NASA Langley Research Center (December 2000) Acoustics Branch Peer Review Team, NASA Langley Research Center (December 1999) U.S. Army Research Office Board of Visitors (1996-1998) Reviewer For: AIAA Journal IEEE Control Systems Magazine AIAA Journal of Guidance, Control and Dynamics IEEE Transactions of Control System Technology AIAA Journal of Spacecraft and Rockets Journal of Sound and Vibration ASCE Journal of Engineering Mechanics Division Mechanics of Machines and Structures ASCE Journal of Aerospace Engineering Optimal Control Applications and Methods ASEE Navy Post Doctoral Program Shock and Vibration ASME Applied Mechanics Reviews SIAM Journal of Control and Optimization ASME Journal of Applied Mechanics National Science Foundation ASME Journal of Dynamic Systems, Measurement Air Force Office of Scientific Research and Control U.S. Army Research Office ASME Journal of Vibration and Acoustics 1985/86 Western New York Patent Award IEEE Transactions on Automatic Control Committee Journal of Intelligent Material Systems Smart Materials and Structures and Structures AIAA Journal of Aircraft Applied Physics Letters Journal of Vibration and Control

Professional Membership and Activity: National Institute of Aerospace: Fellow American Academy of Mechanics: Fellow American Institute of Aeronautics and Astronautics: Fellow

Structural Dynamics Technical Committee, Adaptive Structures Technical Committee International Institute of Acoustics and Vibration: Fellow NAFEMS North American Chapter Steering Committee (2007-2011): Member Society of Experimental Mechanics, Fellow Member-at-Large on the SEM Executive Board (2008-2010) International Modal Analysis Conference Board of Directors Society of Engineering Science

Conference Chairperson and Organizer for the 23rd Annual Technical Meeting, August 1986 Member Board of Directors 1993-1999

American Society of Mechanical Engineers, Fellow Executive Committee, Applied Mechanics Division, 2004-2009 (Honors Committee 2004-2914) Conference Chair Applied Mechanics Division, 2006 IMECE (November)

Daniel J. Inman ()

Chair of 15th Biennial ASME Vibration and Noise Conference, Boston, MA, September 1995 Distinguished Lecturer 1995-2004 Design Engineering Division Executive Committee (1990-2000) General Conference Chair 1995 ASME Design Engineering Technology Conference, Computers and

Engineering Conference and Data Base Symposium Associate Editor, Journal of Applied Mechanics (1988-1991) Associate Editor, Journal of Vibrations, Acoustics, Stress and Reliability in Design (1986-1989) Executive Committee Buffalo Section (1981-1988) Organizer of Session on Structural Control for the 1987 Design Conference, Boston, MA Faculty Advisor, Student Section SUNY-Buffalo (1980-1985) Roster Editor Buffalo Section (1982-1983) Chairman Buffalo Section (1985-1986) Committee on Dynamics of Structures and Systems Technical Editor Journal of Vibration and Acoustics (1990-2000) Overall Conference Chair, 2nd Biennial Conference on Engineering Systems Design and Analysis, Boston, MA, September 1993

Significant Conference Organization (since 2000): Chair of 2020 Gordon Research Conference on Multifunctional Functional Materials and Structures: Progression from Integrated Multifunctionality to Neuromorphic Networks for Autonomy, Ventura Beach Marriott (1/19/2020 - 1/24/2020) Co Chair: 22nd Int’l Conference on Composite Materials (ICCM-22) Interdisciplinary Forum on “Multifunctional Composites for Sensing, Actuation, Computation and Structural Power” (11-16 August 2019, Melbourne, Australia) Co Organizer, 25th International Conference on Adaptive Structures and Technologies (ICAST 13) Organizer, AFOSR/AFRL Workshop on Improved Precision for Space Systems, Kirtland Air Force Base, NM, 27-28 May 2010 Organizer, AFOSR EHSS MURI Annual Review, Virginia Tech, Blacksburg, VA, 9-11 August 2009 Organizer, AFOSR Workshop on Mechanical Energy Harvesting, Virginia Tech, Blacksburg, VA, 12 August 2009 Chairperson and Organizer, 15th International Conference on Adaptive Structures and Technologies (ICAST 04),

Bar Harbor, Maine, 24-27 October 2004 Chairperson and Organizer, NSF/DOE-Sponsored Pan American Advanced Studies Institute on Damage Prognosis,

Florianopolis, Brazil, 19-31 October 2003 Organizer, Structural Dynamics 2000, Los Alamos National Laboratory, Los Alamos, NM, April 1999 Patents: Lietz, R., Romig, J., Gamble, L. ,Inman, D., Glulker, W. S., and Poliakov, A. Active Aero Device to Attenuate Wind Throb, US Patent Application Number US 2019/0276097 A1, Howard, K., September 12, 2019. Inman, D. J., Karami, M. A. and Bradley, D. J., 2017, “Piezoelectric Vibrational Energy Harvester”, US 9,590,533 B2, awarded 7 March 2017. Energy Harvesting For Leadless Pacemakers, Filed: September 15, 2016, Inventors: M. A. Karami, M. H. Ansari, D. Bradley and D. J. Inman, Appln. No.: PCT/US2016/051858 Solid State Current Direction Sensitive Voltage Divider (Bilgen, O., Inman, D.J., Kochersberger, K.B.), U.S. Patent Application No. 61/317,399, filed: August 28, 2009, VTIP No. 10-083.

Daniel J. Inman ()

Piezo-magneto-elastic Power Generator for Broadband Vibration Energy Harvesting (Erturk, A. and Inman, D.J.), U.S. Patent Application No. 61/269,662, filed: June 26, 2009, VTIP No. 09-172. Self-Charging Structures with Flexible Piezoceramics and Thin-film Batteries, Inventors: Steven R. Anton, Alper Erturk, Daniel J. Inman, U.S. Patent Application No. 61/158,568, filed March 9, 2009, VTIP No. 09-071. System and Method for Digital Wideband Excitation Technique for Impedance-Based Structural Health Monitoring Systems, Inventors: J. Kim, B. Grisso, D. Inman and D. Ha, U.S. Patent Application No. 60/973999, filed September 2007. Dual Function System Having a Piezoelectric Element, (Self Sensing Actuator) US Patent No. 5,347,870 awarded September 20, 1994 with R. W. Mayne and J. J. Dosch. Publications (Texts): Inman, D. J., 2017. Vibration with Control, 2nd Edition, John Wiley and Sons, Ltd, New York, NY. Inman, D. J., Engineering Vibration, Pearson, Upper Saddle River, NJ, 1994, 1996 (7th printing in 1999); 2nd Edition, 2000 (9th printing in 2006); Korean edition, January 2003; 3rd Edition, 2007, 4th Edition, 2013. Erturk, A.. and Inman, D. J., 2011. Piezoelectric Energy Harvesting, John Wiley & Sons, Ltd., Chichester, West Sussex, UK, 416 pp. (ISBN 978-0-470-68254-8) Inman, Daniel J., 2009. Engineering (ME 3504 Vibrations), Pearson Custom Publishing, New York, NY, 509 pages. Soutas-Little, R. W., Inman, D. J., and Balint, D., 2009. Engineering Mechanics: Dynamics, Computational Edition, Thompson International, Florence, KY. Soutas-Little, R. W., Inman, D. J., and Balint, D., 2007. A Matlab Manual for Engineering Mechanics, Statics, Computational Edition, Thompson International, Florence, KY. Soutas-Little, R. W., Inman, D. J., and Balint, D., 2007. A Mathcad Manual for Engineering Mechanics, Statics, Computational Edition, Thompson International, Florence, KY. Soutas-Little, R. W., Inman, D. J., and Balint, D., 2007. A Mathematica Manual for Engineering Mechanics, Statics, Computational Edition, Thompson International, Florence, KY. Soutas-Little, R. W., Inman, D. J., and Balint, D., 2007. A Maple Manual for Engineering Mechanics, Statics, Computational Edition, Thompson International, Florence, KY. Soutas-Little, R. W., Inman, D. J., and Balint, D., 2007. Engineering Mechanics: Statics, Computational Edition, Thompson International, Florence, KY. Inman, D. J., 2006. Vibration with Control, John Wiley and Sons, Ltd, New York, NY. Inman, D. J. and Cudney, H. H., 2000, Structural and Machine Design Using Piezoceramic Materials: a Guide for Structural Design Engineers, Final Report NASA Langley Grant NAG-1-1998 (contact Carol at [email protected]) Soutas-Little, R. W. and Inman, D. J., 1999. Engineering Mechanics: Dynamics, Prentice Hall, Upper Saddle River, NJ. Soutas-Little, R. W. and Inman, D. J., 1999. MATLAB Manual for Statics, Prentice Hall, Upper Saddle River, NJ.

Daniel J. Inman ()

Soutas-Little, R. W. and Inman, D. J., 1999. Mathematica Manual for Statics, Prentice Hall, Upper Saddle River, NJ. Soutas-Little, R. W. and Inman, D. J., 1999. Mathcad Manual for Statics, Prentice Hall, Upper Saddle River, NJ. Soutas-Little, R. W. and Inman, D. J., 1999. MATLAB Manual for Dynamics, Prentice Hall Upper Saddle River, NJ. Soutas-Little, R. W. and Inman, D. J., 1999. Mathematica Manual for Dynamics, Prentice Hall, Upper Saddle River, NJ. Soutas-Little, R. W. and Inman, D. J., 1999. Mathcad Manual for Dynamics, Prentice Hall, Upper Saddle River, NJ. Soutas-Little, R. W. and Inman, D. J., 1998. Engineering Mechanics: Statics, Prentice-Hall, Upper Saddle River, NJ. Inman, D. J., 1989. Vibrations: Control, Measurement and Stability, Prentice Hall, Upper Saddle River, NJ. Book Chapters; Books and Proceedings Edited: Wang, Y, and Inman, D. J., 2017, “Simultaneous Energy Harvesting and Gust Alleviation for a Multifunctional Wing Spar Using Reduced Energy Control Laws Via Piezoceramics”, Capter 14, Advanced UAV Aerodynamics, Flight Stability and Control: Novel Concepts, Theory and Applications, Marques, P. and Da Rouch, A. (Eds.), Wiley, ISBN: 978-1-118-92868-4. Karami, M.A. and Inman, D. J., 2015, “Powering Pacemakers with Heartbeat Vibrations”, in Micro Energy Harvesting, Birand D., et al, ed., Wiley Bilgen, O., Kochersberger, K. B., Inman, D. J., 2013, “Chapter 6: Wing-Morphing Design Using Macro-Fiber Composites” chapter in: Smart Composites: Mechanics and Design, Rani El-Hajjar, Valeria La Saponara and Anastasia Muliana (Eds.), CRC Press, Taylor and Francis, 430 pp., ISBN 978-1-43-989591-7 Babtista, F. G., Filho, J. V. and Inman, D.J., “Structural Health Monitoring Based on Piezoelectric Transducers: Analysis and Design Based on the Electromechanical Impedance” Part V (Chapter 28) Smart Sensors for Industrial Applications, Ed K. Iniewski, May 2013, CRC Press. Sodano, H. A. and Inman, D. J., 2009, “Energy Harvesting using Thermoelectric Materials,” in Encyclopedia of Structural Health Monitoring, Ed. by Boller, C., Chang, F., and Fujino, Y., Wiley & Sons Ltd., Chichester, UK, pp. 1351-1360. Priya, S. and Inman, D. J., Editors, 2008, Energy Harvesting Technologies, Springer Science+Business Media, Inc., Norwell, MA, 517 pp. Erturk, A. and Inman, D. J., 2008, “Electromechanical Modeling of Cantilevered Piezoelectric Energy Harvesters for Persistent Base Motions,” in Energy Harvesting Technologies, Ed. by S. Priya and D. J. Inman, Springer, New York, NY, Chapter 2, pp. 39-74. Inman, D. J., 2007, “Passive Damping,” in Handbook of Noise and Vibration Control, Ed. by Malcolm J. Crocker, John Wiley & Sons, Inc., Hoboken, NJ, pp. 225-231. Inman, D. J. and Grisso, B. L., 2007, “Adaptive Structures for Structural Health Monitoring,” in Adaptive Structures – Engineering Applications, Ed. by D. Wagg, I. Bond, P. Weaver, and M. Friswell, John Wiley & Sons Ltd, UK, pp. 1-30. Inman, D., 2007, “Smart Materials and Structures,” in Mechanical Vibration: Where Do We Stand? (CISM Courses and Lectures No. 488), Ed. by Isaac Elishakoff, SpringerWien, New York, NY, pp. 139-150.

Daniel J. Inman ()

Inman, D., 2007, “Applications of Smart Materials for Vibration Suppression,” in Mechanical Vibration: Where Do We Stand? (CISM Courses and Lectures No. 488), Ed. by Isaac Elishakoff, SpringerWien, New York, NY, pp. 151-166. Inman, D., 2007, “Basics of Control for Vibration Suppression,” in Mechanical Vibration: Where Do We Stand? (CISM Courses and Lectures No. 488), Ed. by Isaac Elishakoff, SpringerWien, New York, NY, pp. 167-178. Inman, D., Grisso, B. L., and Sodano, H. A., 2007, “Smart Materials in Structural Health Monitoring,” in Mechanical Vibration: Where Do We Stand? (CISM Courses and Lectures No. 488), Ed. by Isaac Elishakoff, SpringerWien, New York, NY, pp. 179-188. Ruggiero, E. J. and Inman, D. J., 2006, “Integrating Smart Materials in Ultra-Flexible, Ultra-Large Satellites,” AIAA Progress in Aeronautics and Astronautics Book Series: Advances in Adaptive Structures and Materials; in press. Park, G. and Inman, D. J., 2005, “Impedance Based Structural Health Monitoring,” Chapter 18 in Damage Prognosis –For Aerospace, Civil and Mechanical Systems, Inman, D. J., Farrar, C.R. , Steffan, V. and Lopes, V., Editors, John Wiley & Sons, Ltd., Chichester, UK, pp. 275-292. Inman, D. J., 2004, “Vibration Computations and Nomographs,” Chapter 18 in The Engineering Handbook, Second Edition, Ed. by Richard Dorf, CRC Press, LLC, Boca Raton, FL; in press. Inman, D. J., 2004. “Passive Damping,” in Handbook of Noise and Vibration Control, Ed. by Malcolm Crocker, John Wiley & Sons, Inc., Hoboken, NJ; in press. Lopes, V., Steffen, Jr., V., and Inman, D. J., 2004, “Optimal Placement of Piezoelectric Sensor/Actuators for Smart Structures Vibration Control,” in Dynamical Systems and Control (Stability and Control Vol. 22), Ed. by F. Udwadia, H. Weber, G. Leitmann, Chapman & Hall/CRC, Boca Raton, FL, Part II, pp. 221-236. Ruggiero, E., Sodano, H., Park, G., and Inman, D. J., 2003, “Active Vibration Suppression of a Gossamer Spacecraft,” in Mechanics of Electromagnetic Material Systems and Structures, Ed. by Y. Shinido, WIT Press, South Hampton, UK, pp. 287-293. Inman, D. J., 1995, 2003, “Computer Simulation and Nomographs,” The Engineering Handbook, R. C. Dorf, Ed., CRC Press, Boca Raton, FL, pp. 181-188 (Second edition, 2003). Inman, D. J. and Carneiro, S. H. S., 2003, “Smart Structures, Structural Health Monitoring and Crack Detection,” in Research Directions in Distributed Parameter Systems, Ed. by R. C. Smith and M. A. Demetriou, Society for Industrial and Applied Mathematics (SIAM), Philadelphia, PA, Chapter 7, pp. 169-186. Friswell, M.I. and Inman, D. J., 2003, “Vibration Control Using Smart Structures”, Chapter 3 in Smart Technologies, Ed. by K. Ward, World Scientific, pp. 37-70. Steffen, V., Jr., and Inman, D. J., 2002, “On the Optimization of Piezoelectric Actuators for Thin Plates Excitation,” in Nonlinear Dynamics, Chaos, Control, and Their Applications to Engineering Sciences, Ed. by J.M. Balthazar, P.G. Goncalves, R.M.F.L.R.F. Brasil, I.L. Caldas, and F.B. Rizatto, Vol. 4, 2002, pp. 194 – 207. Inman, D. J., 2002, “Active Control: Active Vibration Suppression,” in Encyclopedia of Vibration, Academic Press, London, Vol. I, pp. 48-58. Inman, D. J., 2002, “Damping Models: An Introduction,” in Encyclopedia of Vibration, Academic Press, London, Vol. I, pp. 335-342. Inman, D. J., 2002, “Critical Damping,” in Encyclopedia of Vibration, Academic Press, London, Vol. I, pp. 314-319. Dosch, J. J., Inman, D. J. and Garcia, E., 2001, “A Self Sensing Piezoelectric Actuator for Collocated Control,” in Selected Papers on Smart Structures for Spacecraft, Das, A and Wada, B, Eds., SPIE Milestones Series, Vol.

Daniel J. Inman ()

MS167, pp. 319-338. (A reprint of the article originally appearing in Journal of Intelligent Material Systems and Structures, 1992, Vol. 3, No. 1, pp. 166-185.) Inman, Daniel J., 2001, “The Outcome of SD2000,” Structural Dynamics @ 2000: Current Status and Future Directions, Ed. by D. J. Ewing and D. J. Inman, Research Studies Press Limited, Hertfordshire, England, pp. 445-448. Inman, Daniel J., 2001, “Introduction to SD2000: Origins, Concepts, Plans,” Structural Dynamics @ 2000: Current Status and Future Directions, Ed. by D. J. Ewing and D. J. Inman, Research Studies Press Limited, Hertfordshire, England, pp. 1-7. Inman, Daniel J., 2001, “Multifunctional Structures of the Next Millennium,” Structural Dynamics @ 2000: Current Status and Future Directions, Ed. by D. J. Ewing and D. J. Inman, Research Studies Press Limited, Hertfordshire, England, pp. 59-70. Inman, D. J., 1999, “Theoretical Models for Modal Analysis,” in Modal Analysis and Testing, J.M.M. Silva and N.M.M. Maia, Eds., NATO Science Series E: Applied Sciences, Vol. 363, Kluwer Academic Publishers, The Netherlands, pp. 227-240. Inman, D. J. and Park, C. H., 1999, “Damping: An Introduction to Viscoelastic Models,” in Modal Analysis and Testing, J.M.M. Silva and N.M.M. Maia, Eds., NATO Science Series E: Applied Sciences, Vol. 363, Kluwer Academic Publishers, The Netherlands, pp. 395-408. Schulz, M. J. and Inman, D. J., 1999, “Techniques in Active Dynamic Structural Control to Optimize Structural Controllers and Structural Parameters,” in Structural Dynamic Systems Computational Techniques and Optimization: Dynamic Analysis and Control Techniques (Vol. 14), C. T. Leonedes, Ed., Gordon and Breach Science Publishers, Amsterdam, pp. 55-106. Yae, K. H. and Inman, D. J., 1999, “Techniques in Control-Oriented Reduction of Finite Element Modeling in Structural Dynamic Systems,” in Structural Dynamic Systems Computational Techniques and Optimization: Dynamic Analysis and Control Techniques (Vol. 14), C. T. Leonedes, Ed., Gordon and Breach Science Publishers, Amsterdam, pp. 1-54. Inman, D. J. and Atalla, M. J., 1995, “Calculating Natural Frequency Mode Shapes and Time Responses,” Shock and Vibration Computer Program, W. D. Pilkey and B. Pilkey, Eds., Shock and Vibration Information Analysis Center, pp. 221-248. Inman, D. J., 1990, “Control Structure Interactions: Effects of Actuator Dynamics,” Mechanics and Control of Large Space Structures, Chapter 19, J. Junkins, Ed., AIAA Progress in Aeronautics and Astronautics Series, Vol. 129, pp. 507-534. Inman, D. J. and Minas, C., 1990, “Matching Analytical Models with Experimental Modal Data from Mechanical Systems,” Control and Dynamic Systems: Advances in Industrial Systems, Vol. 37, C. T. Leondes, Ed., Academic Press, pp. 327-363. Publications (Edited): Miyazaki, S., Inman, D. J., and Shinya, N., Editors, 2006, “Special Issue of the Journal of Intelligent Material Systems and Structures - Selected Papers from the Symposia on Smart Materials and Structures”, October 8-13, 2003, Yokohama, Japan, Vol. 17, No. 12, Sage Publications, London. Inman, D. J., Farrar, C.R. , Steffan, V. and Lopes, V., eds., 2005, Damage Prognosis –For Aerospace, Civil and Mechanical Systems, John Wiley & Sons, Ltd., Chichester, UK. Inman, D. J., Ed., 2001, Smart Structures and Materials 2001: Damping and Isolation, (Proceedings of the SPIE Conference, March 4-8, 2001, Newport Beach, CA), Vol. 4331.

Daniel J. Inman ()

Shinozuka, M., Inman, D. J. and O’Rourke, T. D., Eds., Proceedings of the First MCEER Workshop on Mitigation of Earthquake Disaster by Advanced Technologies, 2-3 March 2000, Los Angeles, California. Ewins, D. J. and Inman, Daniel J., Eds., Structural Dynamics @ 2000: Current Status and Future Directions (From a Workshop to Determine Structural Dynamics Research for the Millenium, 10-16 April 1999, Los Alamos, NM), Research Studies Press Limited, Hertfordshire, England. Wereley, N. M., Cudney, H. H., and Inman, D. J., Eds., Special Issue, Journal of Intelligent Material Systems and Structures, Vol. 9, No. 4, April, 1998. Cudney, H. H., Chen, S., Singh, M. P., and Inman, D. J., Eds., Proceedings of the MCEER Workshop on Advanced Materials, Non-Destructive Evaluation, and Condition Assessment for Critical Facilities, 26-27 August 1998, Buffalo, New York. Inman, D. J. and Cudney, H. H., Eds., Proceedings, 4th ARO Workshop on Smart Structures, Blacksburg, VA, August 1997.

Inman, D. J. and Cudney, H. H., Eds., Proceedings 1995 ASME Design Engineering Technical Conferences, Vol. 1, 2, 3, A3, 3B, 3C (DE Vol. 82, 83, 84-1, 84-2, 84-3). Ravani, B. and Inman, D. J., Eds., 50th Anniversary of the Design Engineering Division - A Special Combined Issue of the Journal of Mechanical Design and the Journal of Vibration and Acoustics; Journal of Mechanical Design, Vol. 117, June, 1995. Guran, A. and Inman, D. J., Eds., Wave Motion, Intelligent Structures and Nonlinear Mechanics, World Scientific, 1995. Guran, A. and Inman, D. J., Eds., Smart Structures, Nonlinear Dynamics and Control, Prentice Hall, 1995. Inman, D. J. and Ames, A. K., Eds., Special Issue, Placing Large Flexible Objects in Space - Introduction, Mechanics of Structures and Machines, Vol. 17, No. 1, 1989. Inman, D. J. and Simonis, J. C. Eds., Vibration Control and Active Vibration Suppression, ASME DE Vol. 3, 1987. Keynote/Plenary Addresses: Inman, D. J., 2019, “Morphing UAVs Using Smart Material Based Devices”, 7th International Conference on Smart Materials and Nanotechnology in Engineering (SMN2019), Plenary Lecture, September 20-24 in Harbin, China. Inman, D. J., Baur, J. W., Greenhalgh, E. S. and Lee, B.-L., “Multifunctional Composites for Sensing, Actuation, Computation and Structural Power: Air Force Perspective,” ICCM 22, Melbourne Australia, August 2019. Inman, D. J., 2019, “Smart Structures for Bio-Inspired Morphing”, SMART 2019, 9th ECCOMAS Thematic Conference on Smart Structures and Materials, Paris, France, 8-11 July 2019. Inman, D. J., 2018. “Structural Health Monitoring, Inverse Problems, Model Updating, and Eigenstructure Assignment”, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Inman, D. J., 2018, “Bio Inspired Morphing”, 29Th International Conference on Adaptive Structures and Technologies, Seoul Korea, September 30- October 4, 2o18. Inman, D. J., 2017, “The Role of Composites in Avian Inspired Morphing UAVs”, Keynote, ASME International Conference on Mechanical Engineering, Tampa, FL, November 5-10, 2017. Inman, D.J, 2017, “A Metastructure Approach to Damping and Vibration Absorption”, APVC2017: the 17th Asian Pacific Vibration Conference , Keynote Address, November 13-15, 2017, Nanjing, P. R. China.

Daniel J. Inman ()

Inman, D. J., 2017, “The Role of Composites in Morphing Aircraft”, 21st International Conference on Composite Materials, Plenary Address, Xi’an, P.R. China, 20-25 August 2017. Inman, D. J., 2015, “Good Vibrations: Low Power Energy Harvesting” ASME 2015 Rayleigh Lecture, ASME Noise Control and Acoustics Division, Inter-Noise 2015, San Francisco, CA, 11 August 2015 Inman, D. J., 2014, “Adaptive Structures Applications: Smart Materials to Metastructures”, 2014 Canadian Society of Mechanical Engineers Congress, Toronto, Ontario, Canada, 3-7 June, 2014. Inman, D. J., 2014, “Smart Structures and Metastructures in Vibration Problems”, Keynote Address, 4th International Conference on Dynamics, Vibration, and Control, Shanghai, China, August 22-25, 2014. Inman, D. J., 2014, “Adaptive Structures, Multifunctional Structures and Metastructures for Improved Performance”, keynote Address, Sixth World Conference on Structural Control and Monitoring, 15-17 JULY 2014, Barcelona, Spain. Inman, D. J., 2013, “Energy Harvesting Applications: Reducing Battery Waste”, Proceedings of the International Conference on Green Engineering and Applications, Honolulu, Hawaii, June 25-29, 2013. Inman, D. J., 2013, “Genomics of Multifunctional Structures and Materials for Flight”, Structures, Structural Dynamics and Materials (SDM) Conference Lecture (Keynote), 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA USA Inman, D. J., 2012, “Structural Health Monitoring, Control and Inverse Problems”, Keynote Address, 2012 Inverse Problems Symposium, Michigan State University, June 10-12, 2012. Inman, D. J., 2012, “Smart Materials for Aerospace Structures: Harvesting and Morphing,” 52nd Israel Annual Conference on Aerospace Sciences, 29 February- 1 March 2012, Tel Aviv and Haifa, Israel. Inman, D. J., “Harvesting Energy from Vibrations: Making the Most of Nonlinearity,” Belfer Symposium, The Technion, Haifa, Israel, February 27, 2012. Inman, D. J., 2012, “What Happened to 30 Years of IMAC Papers” Opening keynote address, IMAC, Society of Experimental Mechanics, Jacksonville, Florida, January 30, 2012. Inman, D. J. 2011, "Active Composites in Morphing, Monitoring and Harvesting”, 26th ASC Annual Technical Conference/2nd US-Canada Conference on Composites, Montreal, 26-28 September 2011. Plenary Lecture. Inman, D. J., 2011, “Self-Charging Sensor Platforms,” ASME Symposium on Multifunctional Materials and Structures (ASME McMAT 2011), Chicago, IL, 31 May to 2 June 2011 (Keynote). Inman, D. J. and Erturk, A., 2011. “Energy Harvesting for Wireless Applications”, XIV International Symposium on Dynamic Problems of Mechanics (DINAME 2011), Fleury, A. T., Kurka, P. R. G. (Editors), ABCM, São Sebastião, SP, Brazil, March 13th - March 18th, 2011. (Keynote Address) Inman, D. J., 2011, “Nonlinear Considerations in Energy Harvesting,” EPSRC Energy Harvesting 2011, London, UK, 7 February 2011 (Keynote). Inman, D. J., 2011. “Comments on the NIST TIP Program,” 2011 National Science Foundation’s BSF CMMI Research and Innovation Conference, January 4-7, 2011, Atlanta, GA. (Invited Lecture) Inman, D. J, 2010. “Towards Autonomic Structures”, IDGA’s 10th Lightweight Materials for Defense Conference, December 7, 2010, Arlington, VA. (Keynote Address)

Daniel J. Inman ()

Inman, D. J., 2010, “Harvesting Waste Mechanical and Thermal Energy to Power Small Electronics,” Briefing to the House Committee on Science and Technology, Subcommittee on Energy and Environment, U.S. Congress, Washington, DC, 6 October (Invited Lecture). Inman, D. J., 2010, “An Overview of Smart Technologies,” Institute of Mechanical Engineers Smart Technologies - Clever Thinking for Structures and Materials Conference, University of Bristol, Bristol, UK, 16 September (Keynote). Inman, D. J., 2010. “Harvesting and Monitoring,” University of Bristol, Bristol, UK, 4 May (Invited Brunel Chair Lecture). Inman, D. J., 2009. “Energy Harvesting Methods and Applications,” 20th ICAST, Chinese University of Hong Kong, Hong Kong, China, 20 October (Keynote). Inman, D. J., 2009. “State of the Art in Adaptive Structures and Research in the USA,” 2nd Symposium of the Collaborative Research Center, Transregio 39, Dresden, Germany, 27-28 April (Keynote). Inman, D. J., 2008. “Morphing, Monitoring and Harvesting,” XII International Conference on Mechanical Engineering, Bratislava, Slovakia, 13-14 November (Keynote). Inman, D. J., 2008. “Fun with Funny Materials,“ ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), 28-30 October, Ellicott City, MD (Keynote). Inman, D. J., 2007. “Useful Vibrations,” ASME’s 21st Biennial Conference on Mechanical Vibration and Noise, Plenary Lecture as recipient of the 2007 J. P. DenHartog Medal, Las Vegas, NV, September 4-7, 2007 (Plenary). Inman, D. J. and Erturk, E., 2007. “Energy Harvesting Using Smart Structures,” III ECCOMAS Thematic Conference on Smart Structures and Materials, Gdansk, Poland, July 9-11, 2007 (Keynote). Inman, D. J., 2007. “Modeling Smart Structures For Vibration Applications,” NAFEMS World Congress on Engineering Simulation: Innovation Leads to Competitive Advantage, Vancouver, BC, Canada, May 22-25, 2007 (Keynote). Inman, D. J., 2007. “Modeling and Improving Damping in Lightweight Structures,” International Conference on Engineering Dynamics, April 15-18, 2007, Algarve, Portugal (Keynote). Inman, D. J., 2006. “Vibration and Control of Flexible Spacecraft: Old Lessons and New Problems,” 7th International Conference on Dynamics and Control of Systems and Structures in Space, July 16-20, Greenwich, UK, (Keynote). Also published in Dynamics and Control of Systems and Structures in Space, Ed. S. Hobbs, Cranfield University Press, Cranfield, UK, 2006, pp. 293-305. Inman, D. J., 2006. “Adaptive Structures for Structural Health Monitoring,” 2006 Colston Research Society Symposium on Adaptive Structures, Bristol, UK, July 9-12, 2006 (Keynote). Inman, D. J., 2006. “Active and Passive Damping of Structures,” The Thirteenth International Congress on Sound and Vibration (ICSV13), Vienna, Austria, July 2-6, 2006 (Opening Keynote Address). Inman, D. J., 2005. “Issues in Morphing Unmanned Aircraft,” 2005 ASME International Mechanical Engineering Congress & Exposition, Orlando, Florida , November 5-11, Paper Number IMECE2005-82610 (Keynote). Inman, D. J., 2005. “Smart Sensors for Structural Health Monitoring,” 2nd Intelligent/Smart Materials for Engineering and Biomedical Application (SMEBA), October 29-31, Tokyo and Hakone, Japan (Keynote). Inman, D. J., 2005. “Vibration and Control of Flexible Spacecraft,” ASME’s 20th Biennial Conference on Mechanical Vibration and Noise, September 24-28, Long Beach, CA (Keynote).

Daniel J. Inman ()

Inman, D. J. and Grisso, B. L., 2005. “Autonomous Structures: Adding Some Intelligence to Smart Structures,” II ECCOMAS Thematic Conference on Smart Structures and Materials, July 18-21, Lisbon, Portugal (Keynote). Inman, D. J., 2005. “Introduction to Structural Health Monitoring,” 23rd International Modal Analysis Conference, Orlando, Florida, Jan. 31 –Feb. 3 (Plenary). Inman, D. J., Sodano, H. A. and Park G., 2004. “Review of Piezoelectric Based Power Harvesting,” Air Force/Army/NSF Joint Workshop on Multifunctional Structures for Energy Harvesting & Storage, Stanford, CA, December 15-17 (Plenary). Inman, D. J., 2004. “Control of Morphing Aircraft Structures,” 7th International Conference on Motion and Vibration Control, Washington University in St. Louis, August 8-11 (Keynote). Inman, D. J., 2004. “Morphing Aircraft Structures: Predictions and Experiments,” ASME Engineering Systems Design and Analysis Conference, , Manchester, UK , 19-22 July (Keynote). Inman, D. J., 2003. “Smart Materials for Impedance-Based Monitoring,” Pan American Advanced Studies Institute in Damage Prognosis, Florianopolis, Brazil, October 19 - 30 (Plenary). Inman, D. J., 2003. “Smart Structures in Vibration, Control and Structural Health Monitoring,” CANSMART International Workshop on Smart Materials and Structures, Montreal, Canada, October 16-17 (Keynote). Inman, D. J., 2003. “Morphing UCAV's: Theory and Experiments,” 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, October 7-9 (Keynote). Inman, D. J., 2003. “Morphing Wing Research at Virginia Tech,” 2003 International Workshop on Smart Materials and Structures, KAIST, Daejeon, Korea, October 4-6 (Plenary). Inman, D. J., 2003. “Smart Materials in Damage Detection and Prognosis,” in Key Engineering Materials Vols. 245-246 (Proceedings of the 5th International Conference on Damage Assessment of Structures (DAMAS 2003), Southampton, UK, July 1-3), Ed. by J. M. Dulieu-Barton, M. J. Brennan, K. M. Holford, and K. Worden, Trans Tech Publications Ltd., UK, pp. 3-16 (Keynote). Inman, D. J., 2002. “Smart Structures in Space”, 21st Southeastern Conference on Theoretical and Applied Mechanics, May 19-21, Orlando, Florida (Keynote). Inman, D. J., 2002. “The Role of Smart Materials in Identification and Structural Health Monitoring,” 3rd International Conference on Identification In Engineering Systems, 15-17 April, Swansea, Wales, UK (Keynote). Inman, D. J., 2001. “Smart Structures: Examples and New Problems,”, 16th Brazilian Congress of Mechanical Engineering (COBEM 2001), Uberlândia, Brazil, November 26-30, (Opening Plenary Lecture), Vol. 12, pp. 4-13. Inman, D. J., 2001. “Modeling Passive and Active Damping,” International Workshop on Passive and Active Damping- Directions for the Next Decade, June 18-20, Neu-Ulm, Germany (Keynote). Inman, D. J., 2001. “Smart Materials for Monitoring and Prognosis,” Los Alamos National Lab's Prognosis Workshop, Phoenix, AZ, March 27-29 (proceedings on web) (Plenary). Inman, D. J., 2000, “Application of Smart Structures for Suppression Vibration,” International Scientific Conference-Mechanical Engineering 2000, Bratislava, Slovak Republic, 15 November (Plenary). Inman, D. J., 2000. “Smart Structures: Past, Present, and Future,” International Symposium on Smart Structures and Microsystems 2000, Hong Kong, 19-21 October (Keynote).

Daniel J. Inman ()

Inman, D. J., 2000. “Smart Structures, Structural Health Monitoring and Other Cracks,” Conference on the Future Directions in Distributed Parameter Systems, North Carolina State University, Raleigh, North Carolina, 5-7 October (Plenary). Inman, D. J., 2000. “Thoughts on Control of Adaptive Structures,” AeroSmart 2000, Texas A&M University, College Station, Texas, 20-21 September (Plenary). Inman, D. J., 2000. “Smart Structures - Where's the Beef?” ASME Adaptive Structures and Material Systems Prize Lecture, presented at the 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, Georgia, 3-6 April (Keynote). Inman, D. J., 2000. “Integrating Software into the Mechanical Systems Curriculum,” ASME Engineering Education Conference for ME Department Heads, Fort Lauderdale, Florida, 26-29 March (Plenary). Inman, D. J., 1999. “Smart Structures in Aerospace Applications,” International Symposium on Multifunctional Materials and Structures at the 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennessee, 14-19 November (Keynote). Inman, D. J., 1999. “Active Modal Control for Smart Structures,” International Conference on Vibration, Noise and Structural Dynamics '99, Venice, Italy, 26-29 April (Keynote). Inman, D. J., 1998. “Smart Structures Solutions to Vibration Problems,” Proceedings of the ISMA 98-1998 International Conference on Noise and Vibration Engineering, Leuven, Belgium, 16-18 September 1998, Vol. I, P. Sas, Ed., pp. 1-12 (Keynote). Inman, D. J., 1998. “Comments on Mechanics Reform”, Workshop On Reform of Undergraduate Mechanics Education, Penn State, State College, PA, 16-18 August (Keynote). Inman, D. J., 1998. “Smart Damping,” 19th Southeastern Conference on Theoretical and Applied Mechanics, Deerfield Beach, Florida, 3-5 May (Keynote). Inman, D. J., 1997. “Vibration Suppression Through Smart Damping,” 5th International Conference on Sound and Vibration, Adelaide, South Australia, December 1997 (Keynote). Inman, D. J., 1997. “Active Constrained Layer Damping Treatments,” 5th Recent Advances in Structural Dynamics, Southampton, United Kingdom, July 1997 (Keynote). Inman, D. J., 1996. “Convex Controller Design for Wind Induced Vibration,” 3rd International Colloquium on Bluff Body Aerodynamics and Applications, Blacksburg, Virginia, July 1996 (Plenary). Inman, D. J., 1995. “Programmable Structures for Vibration Suppression,” 1995 International Conference on Structural Dynamics, Vibration, Noise and Control, Hong Kong, December 1995 (Keynote). Inman, D. J., 1995. “Application of Smart Structures for Vibration Suppression,” International Forum on Aeroelasticity and Structural Dynamics, Manchester, United Kingdom, June 1995, Invited by the Royal Aeronautical Society (Plenary).

Publications (Journal):

1. Lee, A. J., Xie, A. and Inman, D. J., 2020, “Suppression of Cross-Well Oscillations for Bistable

Composites Through Potential Well Elimination”, ASME Journal of Vibration and Acoustics, Vol. 142, DOI: 10.1115/1.4046123.

2. Groo, L., Steinke K, Inman, D. J. and Sodano, H.A. “Vibration Damping Mechanism of Fiber Reinforced Composites with Integrated Piezoelectric Nanowires”, ACS Applied Materials and Interfaces, accepted

Daniel J. Inman ()

November 2019. 1(50), pp.47373-47381

3. Acosta, K. L., Srivastava, S., Wilkie, W. K., and Inman, D. J., “Primary and Secondary Pyroelectric Effects in Macro-fiber Composites”, Composites Part B: Engineering, 2019, Engineering, 177, p.107275.

4. Avci, O., Bhargava, A., Nakitas, N. and Inman, D. J., “Vibration Annoyance Assessment of Train Induced Excitations from Tunnels Embedded in Rock”, Science of the Total Environment, 2020 Apr 1;711:134528.

5. Sales, T. P., Rade, D.A., and Inman, D. J., "A Morphing Metastructure Concept Combining Shape Memory Alloy Wires and Permanent Magnets for Multistable Behavior", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 122 (2020). https://doi.org/10.1007/s40430-020-2202-0

6. Lee, A. J., and Inman, D. J., 2019, "Electromechanical Modelling of a Bistable Plate with Macro Fiber Composites under Nonlinear Vibrations", Journal of Vibration and Acoustic, Volume 446, April 2019, Pages 326-342

7. Abdeljaber, O., Avci, O., Kiranyaz, S., Hussein, M. and Inman, D.J., 2018,"Wireless and Real-Time Structural Damage Detection: A Novel Decentralized Method for Wireless Sensor Networks", Journal of Sound and Vibration, Vol. 424, pp.158-172.

8. Yang, Z., Zhou, S., Zu, J. and Inman, D. J., 2018, “High-Performance Piezoelectric Energy Harvesters and

Their Applications”, Joule, Vol. 2, No. 4, pp. 1-56. DOI: https://doi.org/10.1016/j.joule.2018.03.011

9. Wang, Y., and. Inman, D. J., 2018, “Parametric Study of Low Frequency Broadband Rectilinear-to-Rotary Vibrational Energy Harvesting, Transactions of Nanjing University of Aeronautics and Astronautics, Vol. 35, No. 1, pp. 1-10.

10. Wei, D., Wang, W., Cao, J., Bowen, C.R., Inman, D.J., and Lin, J "Performance Enhancement of Nonlinear

Asymmetric Bistable Energy Harvesting from Harmonic, Random and Human Motion Excitations," Applied Physics Letters, Vol.112, No. 21. DOI: 10.1063/1.5027555

11. Lee, A. J. and Inman, D. J., 2018, “Snap-Through Morphing Enabled by Broadband Energy Harvesting,”

Journal of Intelligent Material Systems and Structures, Vol. 29, No. 11, pp. 2528-2543.

12. Huang, W., Zhang, H.; Inman, D. J., Qiu, J., Cesnik, C. E., Ji, H., “Low Reflection Effect by 3D Printed Functionally Graded Acoustic Black Holes” Journal of Sound and Vibration, First published version available online: 28-FEB-2019 DOI 10.1016/j.jsv.2019.02.043

13. Emam, S.A., Hobeck, J. and Inman, D.J., 2019. Experimental investigation into the nonlinear dynamics of

a bistable laminate. Nonlinear Dynamics, pp.1-21.

14. Acosta, K.L., Wilkie, W.K. and Inman, D.J., 2018. Characterizing the pyroelectric coefficient for macro-fiber composites. Smart Materials and Structures, 27(11), p.115001.

15. Zhou, S., Yan, B. and Inman, D., 2018. A Novel Nonlinear Piezoelectric Energy Harvesting System Based on Linear-Element Coupling: Design, Modeling and Dynamic Analysis. Sensors, 18(5), p.1492.

16. Abdeljaber, O., Avci, O., Kiranyaz, M.S., Boashash, B., Sodano, H. and Inman, D.J., 2018. 1-D CNNs for

structural damage detection: verification on a structural health monitoring benchmark data. Neurocomputing, 275, pp.1308-1317.

Daniel J. Inman ()

17. Gamble, L. L. and Inman, D. J., 2018, “A Tale of Two Tails: Developing an Avian Inspired Morphing Actuator for Yaw Control and Stability,” Bioinspiration & Biomimetics, Vol. 13, No. 2, p. 026008.

18. Santos, A. A., Hobeck, J. D. and Inman, D. J., 2018, “Orthogonal spiral structures for energy harvesting

applications: Theoretical and experimental analysis”, Journal of Intelligent Material Systems and Structures, Vol. 29, No. 9, pp. 1900-1912. https://doi.org/10.1177/1045389X18754346

19. de Oliveira, M, A., Araujo, N. V.S., Inman, D. J., and Filho, J. V., 2018, “Kappa-PSO-FAN Based Method for Damage Identification on Composite Structural Health Monitoring Expert Systems With Applications” Expert Systems With Applications Vol. 95, pp. 1-13.

20. Reichl, K. K. and Inman, D. J., 2018, “Dynamic Mechanical and Thermal Analysis of Objet Connex 3D Printed Materials,” Experimental Techniques, vol. 42, pp. 19-25.

21. Gamble, L.L. and Inman, D.J., 2017, “Yaw Control of a Smart Morphing Tailless Aircraft Concept”,

Advances in Science and Technology, Vol. 101, pp. 127-132.

22. Lee, A. J., Moosavian, A. and Inman, D. J., 2017, “Control and Characterization of a Bistable Laminate Generated with Piezoelectricity”, Smart Materials and Structures, Vol. 26, 15 pages.

23. Rabelo, D., Hobeck, J. D., Inman, D. J., Steffan, V. Jr., and Neto, R.M.R., 2017, “Real-Time Structural

Health Monitoring of Fatigue Crack on Aluminum Beam Using an Impedance-Based Portable Device” Journal of Intelligent Material Systems and Structures, DOI: 10.1177/1045389X17705213.

24. Reichl, K.K. and Inman, D.J., 2017 “Lumped Mass Model of a 1D Metastructure for Vibration Suppression

with no Additional Mass” Journal of Sound and Vibration, Vol. 403, pp. 75–89. https://doi.org/10.1016/j.jsv.2017.05.026

25. Gamble, L.L., Pankonien, A.M. and Inman, D.J., 2017. “Stall Recovery of a Morphing Wing via Extended Nonlinear Lifting-Line Theory”, AIAA Journal, Vol. 55, No. 9, pp. 2956-2963.

26. Bellos, J., Inman, D. J. and Bakas, N., 2017, "Nature of Coupling in Non-conservative Distributed

Parameter Systems Attached to External Damping Sources" Mathematics and Mechanics of Solids, DOI: 10.1177/1081286517714022. (Vol. 25, No. 7).

27. Gamble, L. L. and Inman, D. J., 2017, "Why Morphology Matters in Birds and UAV's: How Scale Affects

Attitude Wind Sensitivity", Applied Physics Letters, Vol. 111, No. 20, 203701, https://doi.org/10.1063/1.4997790.

28. Lee, A. J., Moosavian, K. and Inman, D. J., 2017 "A Piezoelectrically Generated Bistable Laminate for

Morphing", Materials Letters, Vol. 190, pp. 123-126.

29. Abdeljaber, O., Avci, O., Kiranyaz, S., Gabbouj, M. and Inman, D.J., 2017. Real-time vibration-based structural damage detection using one-dimensional convolutional neural networks. Journal of Sound and Vibration, 388, pp.154-170.

30. Zhou, S., Hobeck, J.D., Cao, J. and Inman, D.J., 2017. Analytical and experimental investigation of flexible longitudinal zigzag structures for enhanced multi-directional energy harvesting. Smart Materials and Structures, 26(3), p.035008.

31. de Oliveira, M.A. and Inman, D.J., 2017. Performance analysis of simplified Fuzzy ARTMAP and Probabilistic Neural Networks for identifying structural damage growth. Applied Soft Computing, 52, pp.53-63.

32. Moosavian, A., Sun, C.Z.J., Xi, F.J. and Inman, D.J., 2017. Dimensional Synthesis of a MultiLoop Linkage

With Single Input Using Parameterized Curves. Journal of Mechanisms and Robotics, 9(2), p.021007.

Daniel J. Inman ()

33. Hobeck, J.D. and Inman, D.J., 2017. Recursive formulae and performance comparisons for first mode

dynamics of periodic structures. Smart Materials and Structures, 26(5), p.055028. 34. Zhou, S., Chen, W., Malakooti, M. H., Cao, J. and Inman, D. J., 2016, “Design and Modeling of a Flexible

Longitudinal Zigzag Structure for Enhanced Vibration Energy Harvesting”, Journal of Intelligent Material Systems and Structures, DOI: 10.1177/1045389X16645862.

35. de Oliveira, M.A., Vieira Filho, J., Lopes Jr, V. and Inman, D.J., 2016. A new approach for structural damage detection exploring the singular spectrum analysis. Journal of Intelligent Material Systems and Structures, p.1045389X16667549.

36. Cao, J., Ling, M., Inman, D.J. and Lin, J., 2016. Generalized constitutive equations for piezo-actuated

compliant mechanism. Smart Materials and Structures, 25(9), p.095005.

37. Ling, M., Cao, J., Zeng, M., Lin, J. and Inman, D.J., 2016. Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms. Smart Materials and Structures, 25(7), p.075022

38. Anderson, M., and Inman, D. J., 2016, “Simplified Fuzzy ARTMAP Network-Based Method for

Assessment of Structural Damage Applied to Composite Structures", Journal of Composite Materials, Vol. 50, No. 20, pp. 3501-3514, doi: 10.1177/0021998315621964.

39. Shadan, F., Khoshnoudian, F., Inman, D. J. and Eshfadiari, A., 2016, “Experimental Validation of A FRF-Based Model Updating Method”, Journal of Vibration and Control, DOI: 10.1177/1077546316664675.

40. Garcia Cava, D., Trendafilova, I., Inman, D. J., 2016, “A Study on the Vibration-Based Self-Monitoring Capabilities of Nano-Enriched Composite Laminated Beam," Smart Materials and Structures, Vol. 25, doi:10.1088/0964-1726/25/4/045011

41. Hobeck, J. D., and Inman, D. J., 2016. “Residual Thermal Effects in Macro Fiber Composite Actuators Exposed to Persistent Temperature Cycling”, Applied Physics Letters, Vol. 108, No. 11, p.111901.

42. Hobeck, J. D., and Inman, D. J., 2016, “Dual Cantilever Flutter: Experimentally Validated Lumped Parameter Modeling and Numerical Characterization”, Journal of Fluids and Structures, Vol. 61,February 2016, pp. 324–338.

43. Wu, W., Qu, W., Xiao, L. and Inman, D. J., 2016, “Detection and Localization of Fatique Crack with Nonlinear Instantaneious Baseline,” Journal of Intelligent Material Systems and Structures, Vol. 27, No. 12, pp. 1577-1583.

44. Gonzalez-Buelga, A., Lazar, L., Neild, S. A. and Inman, D. J., 2016, “Assessing the Effect of

Nonlinearities on the Performance of a Tuned Inerter Damper", Structural Control and Health Monitoring, Vol. 24, No. 3.

45. Abdeljaber, O, Avici O. and Inman, D. J., 2016, “Active Vibration Control of Flexible Cantilever Plates

Using Piezoelectric Materials and Artificial Neural Networks” Journal of Sound and Vibration, Vol. 363, 17 February 2016, pp. 33–53.

46. Abdeljaber, O, Avici O. and Inman, D. J., 2016, “Optimization of Chiral Lattice Based Metastructures for

Broadband Vibration Suppression Using Genetic Algorithms” Journal of Sound and Vibration, Vol. 369, 12 May 2016, Pages 50–62

47. Barbosa, W. O. V., De Paula, A. S., Savi, M. A., and Inman, D. J., 2015, “Chaos Control Applied To Piezoelectric Vibration-Based Energy Harvesting Systems”, The European Physical Journal Special Topics, Vol. 22, No.14-15, pp. 2787-2801.

Daniel J. Inman ()

48. Cao, J., Wang, W., Zhou, S., Inman, D.J. and Lin, J., 2015. Nonlinear time-varying potential bistable energy harvesting from human motion. Applied Physics Letters, 107(14), p.143904.

49. Emam, S. A., Inman, D. J., 2015, “A review on bistable composite laminates for morphing and energy harvesting,” Applied Mechanics Reviews, Vol. 67, No. 6, 60803.

50. Gonzalez-Buelga, A., Clare, L.R., Neild, S.A., Jiang, J.Z. and Inman, D.J., 2015, “An Electromagnetic Inerter-Based Vibration Suppression Device”, Smart Materials and Structures, Vol. 24, No. 5, paper 055015, 10 pages. open access

51. Hobeck, J.D., and Inman, 2015, “Low-Cost Pressure Probes for Predicting Turbulence-Induced Vibration from Invasive Low Velocity Turbulent Flow”, IEEE Sensors Journal, Vol.15, No. 8, pp. 4373-4379, doi:10.1109/JSEN.2015.2419454.

52. Gonzalez-Buelga, A., Clare, L.R., Neild, S.A., Burrow, S.G. and Inman, D.J., 2015, “An Electromagnetic

Vibration Absorber With Harvesting and Tuning. Structural Control and Health Monitoring, Vol. 22, No. 11, 1359–1372.

53. Pankonien, A. M. Faria, C. T. and Inman, D. J., 2015, “Synergistic Smart Morphing Aileron: Experimental

Quasi-Static Performance Characterization,” Journal of Intelligent Material Systems and Structures, Vol. 26 N0. 10, pp. 1179-1190.

54. Zhou, S., Cao, J., Inman, D. J., Liu, S., Wang, W., and Lin, J., 2015, “Impact-Induced High-Energy Orbits

of Nonlinear Energy Harvesters” Applied Physics Letters, Vol. 106, No. 9.

55. Avirovik, D., R. Kishore, S. Bressers, D. J. Inman, and S. Priya, 2015, "Miniature Contactless Piezoelectric Wind Turbine." Integrated Ferroelectrics 159, no., pp. 1-13.

56. Gonzalez-Buelga, A., Clare, L.R., Cammarano, A., Neild, S. A., Burrow, S. G, and Inman D.J., 2015, “An Electromagnetic Vibration Absorber with Harvesting and Tuning Capabilities”, Structural Control and Health Monitoring, DOI: 10.1002/stc.1748.

57. Spak, K.S, Agnes, G.S. and Inman, D. J., 2015, “Modeling Vibration Response and Damping of Cables and Cabled Structures”, Journal of Sound and Vibration, Vol. 336, 3 February 2015, Pages 240–256.

58. Abdelghani, M., and D.J., 2015, "Modal Appropriation for Use with In-Operation Modal Analysis," Shock and Vibration, vol. 2015, Article ID 537030, 5 pages, doi:10.1155/2015/537030.

59. Lee, A. J., Wang, Y. and Inman, D.J., 2014, "Energy harvesting of piezoelectric stack actuator from a shock event." Journal of Vibration and Acoustics 136.1 (2014): 011016.

60. Bae, J. S., Hwang, J. H, Kawg, D. Park, J and Inman, D. J., 2014, “Vibration Suppression of a Large Beam Structure Using Tuned-Mass-Damper and Eddy Current Damping," Shock and Vibration, Volume 2014, Article ID 893914, 10 pages.

61. Cao, J., Zhou, S. , Inman, D.J. and Chen, Y. , 2014, “Chaos in the Fractionally Damped Broadband

piezoelectric Energy Generator”, Nonlinear Dynamics, DOI 10.1007/s11071-014-1320-6. (March 2014).

62. Zhou, S., Cao, J., Inman, D. J., Liu, S. and Wang, Z., 2014, “Broadband Tristable Energy Harvester : Modeling And Experiment Verification”, Applied Energy, Vol. 133, pp. 33-39.

63. Gonzalez-Buelga, A., Clare, L.R., Cammarano, A., Neild, S. A., Burrow, S. G, and Inman D.J., 2014, “An Optimised Tuned Mass Damper/Harvester Device” Structural Control and Health Monitoring, Vol. 21, No. 8, pp. 1154-1169.

Daniel J. Inman ()

64. De Paula, A. S., Inman, D. J. and Savi, M. A., 2014 “Energy Harvesting in a Nonlinear Piezomagnetoelastic Beam Subject to Random Excitation”, Mechanical Systems and Signal Processing, DOI: 10.1016/j.ymssp.2014.08.020

65. Spak, K.S, Agnes, G.S. and Inman, D. J., 2014, “Parameters for Modeling Stranded Cables as Structural Beams,” Experimental Mechanics, Vol. 54, No. 9, pp.1613-1626.

66. Dodson, J. C. and Inman, D. J., 2014, "Investigating the Thermally Induced Acoustoelastic Effect in Isotropic Media with Lamb Waves", Journal of the Acoustical Society of America, 2014. 136(5): p.2532-2544, DOI: 10.1121/1.4897310

67. De Abreu, G. L. C. M., Maesta, M. F., Lopes, V. jr., De Marqui, C. jr., Faria, C. T. and Inman, D. J., 2014, “Active Angular Control of a Sectioned Airfoil using Shape Memory Alloys and Fuzzy Controller”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, DOI 10.1007/s40430-014-0293-1.

68. Choi, J. D. and Inman, D. J., 2014, “Spectrally Formulated Modeling of a Cable-Harnessed Structure”, Journal of Sound and Vibration, Vol. 333, No.14, pp.3286-330, http://dx.doi.org/10.1016/j.jsv.2014.03.020i.

69. Bae, J. S. and Inman, D. J., 2014, “Aeroelastic characteristics of linear and nonlinear piezo-aeroelastic

energy harvester”, Journal of Intelligent Material Systems and Structures, Vol 25, No. 4, pp. 401- 416.

70. Tarazaga, P.A., Johnson, M. E., and Inman, D. J., 2013, “Experimental Validation of the Vibro-Acoustic Model of a Pressurized Membrane”, Mechanical Systems and Signal Processing, Vol. 45, No. 2., pp. 330-345.

71. Daneshmehr, A. R., Nateghi, A. and Inman, D. J., 2013, “Free Vibration Analysis of Cracked Composite

Beams Subjected to Coupled Bending–Torsion Loads Based on a First Order Shear Deformation Theory”, Applied Mathematical Modelling, Vol. 37, Issue 24, pp. 10074-10091.

72. Martin, L. A., and Inman, D. J., 2013, “A Novel Viscoelastic Material Modulus Function for Modifying the

Golla-Hughes-McTavish Method,” International Journal of Acoustics and Vibration, Vol. 18, No. 3, pp. 102-108.

Daniel J. Inman ()

73. Faria, C. T. and Inman, D. J., 2014, “Modeling Energy Transport in a Cantilevered Euler-Bernoulli Beam Actively Vibrating in Newtonian Fluid”, Mechanical Systems and Signal Processing, Vol. 45, No. 2, 4 April 2014, pp. 317-329.

74. Spak, K. S., Agnes, G. S. and Inman, D. J., 2014, “Effects on Dynamic Response of Spaceflight Cables”, Journal of Spacecraft and Rockets, Vol. , No, DOI: 10.2514/1.A32780.

75. Spak, K., Agnes, G. and Inman, D.J., 2013, “Cable Modeling and Internal Damping Developments” Applied Mechanics Reviews, 65(1), 010801 (Mar 21, 2013) (18 pages).

76. Betts, D. N., Bowen, C. R. , Kim, H. A., Gathercole, N, Clarke, C. T. and Inman, D. J., 2013, “Nonlinear Dynamics of a Bistable Piezoelectric-Composite Energy Harvester for Broadband Application”, The European Physical Journal Special Topics, Vol. 222, pp. 1553-1562.

77. Daneshmehr, A.R., Nateghi, A. R. and Inman, D. J., 2013, “Free Vibration Analysis of Cracked Beams Subjected to Coupled Bending-Torsion Loads Based on a First Order Beam Theory”, Applied Mechanics and Materials, Vol. 325-326, pp1318-13-23.

78. Katayama, N., Ishimura, K. Minesugi, K. and Inman, D. J., 2013. “Shape Control of Multi-Cellular Inflatable Panels”, Frontiers in Mechanical Engineering, DOI 10.1007/s11465-013-0267-5.

79. Wang, Y. and Inman, D. J., 2013, “Finite Element Analysis and Experimental Study on Dynamic Properties of a Composite Beam with Viscoelastic Damping”, Journal of Sound and Vibration, Vol. 332 (2013), pp. 6177-6191.

80. Martin, L. A., and Inman, D. J., 2013, “A Novel Viscoelastic Material Modulus Function for Modifying the

Golla-Hughes-McTavish Method,” International Journal of Acoustics and Vibration, Vol. 18, No. 3, pp. 102-108.

81. Qu, W.Z., Xiao, L., Zhou, Y. and Inman, D. J., 2013, “Lamb wave damage detection using time reversal DORT Method”, Smart Materials and Structures, Vol. 22, No. 4, pp. 1577- 1583.oi:10.1088/0964-1726/22/4/045014

82. Afshari, M., and Inman, D. J, 2013, “Continuous Crack Modeling in Piezoelectrically Driven Vibrations of

an Euler-Bernoulli Beam”, Journal of Vibration and Control”, Vol.19, No. 3, pp. 341-355. 83. Dodson, J. C. and Inman, D. J., 2013, “Thermal Sensitivity of Lamb Waves for Structural Health

Monitoring Applications” Ultrasonics, Volume 53, Issue 3, Pages 677–685. 84. Wang, Y. and Inman, D. J., 2013, “Simultaneous Energy Harvesting and Gust Alleviation for a

Multifunctional Composite Wing Spar Using Reduced Energy Control via Piezoceramics”, Journal of Composite Materials 47(1) 125–146.

85. Bilgen, O., Butt, L., Day, S., Mason, W. H., Weaver, J., Sossi, C., Wolek, A. and Inman, D. J., 2013, "A

Novel Unmanned Aircraft with Solid-State Control Surfaces: Analysis and Flight Demonstration" Journal of Intelligent Material Systems and Structures, Vol. 24, No 2., January 2013, pp.147-167.

86. Avirovik, D., Karami, M. A., Inman, D. J. and Priya, S., 2012, " L-Shape Piezoelectric Motor – Part II:

Analytical Modeling," IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol. 59, pp. 108-120.

87. Gambier, P., Anton, S.R., Kong, N., Erturk, A., and Inman, D.J., 2012, “Piezoelectric, Solar and Thermal

Energy Harvesting for Hybrid Low-Power Generator Systems with Thin-Film Batteries,” Measurement Science and Technology, 23, 015101 (11pp).

Daniel J. Inman ()

88. Bueno, D.D., Marqui, C.R., Lopes, V. Jr., Brennan, M.J., and Inman, D. J., 2012. “Structural Damage Location Using Observability Grammian Matrices,” Shock and Vibration, Vol. 19, No. 3, pp. 287-299.

89. Palomino, L. V., Tsuruta, K. M., Mour, Jr, J. R. V., Radea, D. A., Steffen, Jr, V., & Inman, D. J., 2012, “Evaluation Of The Influence Of Sensor Geometry And Physical Parameters On Impedance-Based Structural Health Monitoring”, Shock and Vibration, Vol.19, No. 5, 811-823.

90. Karami, A. and Inman, D. J., 2012, “Parametrically Excited Nonlinear Piezoelectric Wind Energy

Harvester”, Renewable Energy, Volume 50, February 2013, Pages 977-987.

91. Anton, S.R., Erturk, A., and Inman, D.J., 2012, “Multifunctional Unmanned Aerial Vehicle Wing Spar for Low-Power Generation and Storage,” AIAA Journal of Aircraft, 49, pp. 292-301.

92. Hobeck, J. D. and Inman, D. J., 2012, “Artificial Piezoelectric Grass for Energy Harvesting from

Turbulence-Induced Vibration”, Smart Materials and Structures, Vol. 21, No. 10, 105024 doi:10.1088/0964-1726/21/10/105024.

93. Wang, Y. and Inman, D. J., 2012, “A Survey of Control Strategies for Simultaneous Vibration Suppression

and Energy Harvesting Via Piezoceramics”, Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, pp. 2021-2037.

94. Tarazaga, P.A., Johnson, M.E. and Inman, D.J., 2012 “Vibro-acoustics of a pressurized optical membrane”,

Mechanical Systems and Signal Processing, Vol. 30, pp. 373-392.

95. Karami, M. A., and Inman, D. J., 2012, “Powering Pacemakers from Heartbeat Vibrations using Linear and Nonlinear Energy Harvesters”, Applied Physics Letters, 100, 042901 (2012); doi: 10.1063/1.3679102.

96. Stanton, S.C., Erturk, A., Mann, B.P., Dowell, E. H. and Inman, D. J., 2012, “Nonlinear Nonconservative

Behavior and Modeling of Piezoelectric Energy Harvesters Including Proof Mass Effects,” Journal of Intelligent Material Systems and Structures, Vol. 23, No 2, Jan. 2012, pp. 183-199.

97. Hongli, J., Qiu, J. Xia, P. and Inman, D. J., 2012 “Analysis of Energy Conversion in Switched-Voltage

Control with Arbitrary Switching Frequency”, Sensors and Actuators A, Vol. 174, pp. 162-172.

98. Anton, S.R., Erturk, A. and Inman D. J., 2012, “Bending strength of piezoelectric ceramics and single crystals for multifunctional load-bearing applications”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 59, No. 6, June 2012, pp. 1085- 1092.

99. Baptista, F.G., Filho, J. V. and Inman, D. J., 2012 “Real Time Measurement System with Temperature Effects Compensation for Impedance Based Structural Health Monitoring”, Structural Health Monitoring, Vol. 11, No. 2, pp. 173-186.

100. Hongli, J. , Qiu, J. Xia, P. and Inman, D. J., 2012, “Coupling Analysis of Energy Conversion in Multi-mode Vibration Structural Control Using a Synchronized Switch Damping Method”, Smart Materials and Structures, Vol. 21, doi10.1088/0964-1726/21/015013 (16 pp).

101. Butrym, B., Kim, M. and Inman, D. J., 2012, “Fatigue Life Estimation of Structural Components Using MFC Sensors”, Strain, Vol. 48, No.3, pp. 190-197.

102. Qu, W.Z. and Inman, D.J., 2011, “Temperature Influence Compensation for Lamb Wave Damage Detection”, Applied Mechanics and Materials, Vols. 105-107 (2012) pp. 621-625.

103. Filho, J. V., Baptista, B. G. and Inman, D. J., 2011. “Time-Domain Analysis of Piezoelectric Impedance-Based Structural Health Monitoring Using a Multilevel Wavelet Decomposition,” Mechanical Systems and Signal Processing, Vol. 25, No. 5, July 2011, pp. 1550–1558.

Daniel J. Inman ()

104. Barbarino, S., Bilgen, O., Ajaj, R. M., Friswell, M. I. and Inman, D. J., 2011, “A Review of Morphing Aircraft”, Journal of Intelligent Material Systems and Structures, Volume 22, No. 9., June 2011, pp. 819-974.

105. Erturk, A., and Inman, D.J., 2011. “Parameter Identification and Optimization in Piezoelectric Energy

Harvesting: Analytical Relations, Asymptotic Analysis and Experimental Validations,” IMechE Journal of Systems and Control Engineering; June 2011 Vol. 225 No. 4 485-496.

106. Lallart, M. and Inman, D. J., 2011. “Low-Cost Integrable Tuning-Free Converter for Piezoelectric Energy

Harvesting Optimization,” IEEE Transactions on Power Electronics; Vol. 25, No.5, pp. 1811 – 1819.

107. Karami, M. A., and Inman, D. J., 2011, "Parametric study of zigzag micro-structure for vibrational energy harvesting," IEEE/ASME Journal of Microelectromechanical Systems, Vol. 21, No. 1, pp. 145-160, DOI: 10.1109/JMEMS.2011.2171321

108. Bilgen, O., Wang, Y. and Inman, D. J., 2011, “Electromechanical Comparison of Cantilevered Beams with

Multifunctional Piezoceramic Devices”, Mechanical Systems and Signal Processing, DOI: 10.1016/j.ymssp.2011.09.002. 7-OCT-2011

109. Wang, Y. and Inman, D. J., 2011, "Comparison of Control Laws for Vibration Suppression Based

on Energy Consumption", Journal of Intelligent Material Systems and Structures, Volume 22 Issue 8 May 2011 pp. 795 - 809.

110. Karami, M. A. and Inman D. J., 2011, "Equivalent Damping and Frequency Change for Linear and Nonlinear Hybrid Vibrational Energy Harvesting Systems", Journal of Sound and Vibration, Vol. 330, pp 5583-5597.

111. Bilgen, O., Inman, D. J. and Friswell, M.I., 2011, “Theoretical and Experimental Analysis of Hysteresis in Piezocomposite Airfoils using the Classical Preisach Model’, Journal of Aircraft, 48(6), November-December 2011, pp. 1935-1947. DOI: 10.2514/1.56694

112. Penny, J., Friswell, M. I. and Inman, D. J., “Approximate Frequency Analysis in Structural Dynamics” Mechanical Systems and Signal Processing, Vol. 27, pp. 370-378, DOI 10.1016/j.ymssp.2011.08.006.

113. Faria, C. T., Lopes, V., Jr., and Inman, D. J., 2011, “Modeling and Experimental Aspects of Self-Healing Bolted Joint Through Shape Memory Alloy Actuators" Journal of Intelligent Material Systems and Structures, Vol. 22, No. 14, pp. 1581-1594.

114. Karami, M. A., Bilgen, O., Inman, D. J. and Friswell, M.I., 2011, “Experimental and Analytical Parametric Study of Single Crystal Unimorph Beams for Vibration Energy Harvesting”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol, 58, No. 7, pp. 1508 - 1520.

115. Scarpa, F. L., Narojczyk, J., Wojciechowski, K. W., and Inman, D. J., 2011, “Self-Filtering Oscillations in Carbon Nanotube Hetero-Junctions”, Nanotechnology, Vol. 22, No. 46, Nov. 2011, 465501 doi:10.1088/0957-4484/22/46/465501.

116. Betts, D. N., Bowen, C., Kim, A. and Inman, D. J., 2011, "Optimal Configurations of Bistable Piezo-Composites for Energy Harvesting", Applied Physics Letters, Vol.100, Issue 11, 13 March 2012, DOI: 10.1063/1.3693523.

117. Ohanian, O. J., Karni, E. D., Gelhausen, P. A., Londenberg, W. K., and Inman D. J., 2011, "Ducted-Fan Force and Moment Control via Steady and Synthetic Jets" AIAA, Journal of Aircraft, Vol. 48, No. 2, pp. 514- 526.

Daniel J. Inman ()

118. Ji, H., Qiu, J., Cheng, J. and Inman, D. J., 2011, “Application of a Negative Capacitance Circuit in Synchronized Switch Damping Techniques for Vibration Suppression”, Journal of Vibration and Acoustics, Vol. 133, DOI: 10.1115/1.4003146.

119. Karami, M. A., and Inman, D. J., 2011. “Analytical Modeling and Experimental Verification of the

Vibrations of the Zigzag Micro-Structure for Energy Harvesting,” ASME Journal of Vibration and Acoustics, Vol. 133, No. 1, 011002 (10 pages) doi:10.1115/1.4002783

120. Baptista, F. G., Filho, J. V., and Inman, D. J., 2011. “Sizing PZT Transducers in Impedance-Based

Structural Health Monitoring,” IEEE Sensors Journal, Vol. 11, No. 6, pp. 1405-1414.

121. Bilgen, O., Karami, M. A., Inman, D. J. and Friswell, M. I., 2011, “Actuation Characterization of Cantilevered Unimorph Beams with Single Crystal Piezoelectric Materials,” Smart Materials and Structures, Vol. 20, No. 5, 055024, doi: 10.1088/0964-1726/20/5/055024

122. Salehian, A., and Inman, D. J., 2011, “Thermally Induced Oscillations of an Inflatable Space Structure

with a Repeated Element Pattern,” International Journal of Acoustics and Vibrations, Vol. 16, No. 1, March, pp. 3-11.

123. De Marqui, Jr., C., Vieira, W.G.R, Erturk, A., and Inman, D.J., 2011. “Modeling and Analysis of

Piezoelectric Energy Harvesting from Aeroelastic Vibrations Using the Doublet-Lattice Method,” ASME Journal of Vibration and Acoustics, Vol. 133, Issue 1, 011003 (9 pages) doi:10.1115/1.4002785

124. Karami, M. A., and Inman, D. J., 2011. “Electromechanical Modeling of the Low-Frequency Zigzag

Micro-Energy Harvester,” Journal of Intelligent Material Systems and Structures, Vol. 22, No. 3, pp. 271-282.

125. Starek, L, Inman, D.J. and Starek, D., 2011, “Application of Inverse Vibration Problems to Model

Updating”, Acta Mechanica Slovaca, Vol. 15, No. 3, pp. 38-45. DOI: 10.21496/ams.2011.026.

126. Bilgen, O., De Marqui, Jr., C., Kochersberger, K. B., and Inman, D. J., 2011. “Macro-Fiber Composite Actuators for Flow Control of a Variable Camber Airfoil,” Journal of Intelligent Material Systems and Structures, Vol. 22, No. 1, pp. 81-91.

127. Anton, S. R., Erturk, A. and Inman, D. J., 2010. “Multifunctional Self-Charging Structures Using

Piezoceramics and Thin-Film Batteries,” Smart Materials and Structures, Vol. 19, No 11 doi: 10.1088/0964-1726/19/11/115021

128. Park, S., Anton, S. R., Kim, J. K., and Inman, D.J., 2010. “Instantaneous Baseline Structural Damage

Detection using a Miniaturized Piezoelectric Guided Waves System,” KSCE Journal of Engineering; Vol. 14, No. 6., pp. 889-895.

129. Lallart, M. and Inman, D. J., 2010. “Small-Scale Piezoelectric Energy Harvesting Devices Using Low

Energy Density Sources,” Journal of the Korean Physical Society, Vol. 57, No. 4, pp. 947-951.

130. Baptista, F. G., Filho, J. V., and Inman, D. J., 2010. “Influence of Excitation Signal on Impedance-Based Structural Health Monitoring.” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 14, pp. 1409-1416.

131. Erturk, A., and Inman, D.J., 2010. “Broadband Piezoelectric Power Generation on High-Energy Orbits of

the Bistable Duffing Oscillator with Electromechanical Coupling”, Journal of Sound and Vibration doi:10.1016/j.jsv.2010.11.018.

132. Bilgen, O., Kochersberger, K. B., Inman, D. J., and Ohanian, O. J., III, 2010. “Lightweight High Voltage

Electronic Circuits for Piezoelectric Composite Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 14, pp. 1417-1426.

Daniel J. Inman ()

133. Lallart, M., Inman, D. J., and Guyomar, D., 2010. “Transient Performance of Energy Harvesting Strategies

under Constant Force Magnitude Excitation,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 13, pp. 1279-1291.

134. Kong, N., Ha, D. S., Erturk, A., and Inman, D. J., 2010. “Resistive Impedance Matching Circuit for

Piezoelectric Energy Harvesting,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 13, pp. 1293-1302.

135. Bilgen, O., De Marqui, Jr., C., Kochersberger, K. B., and Inman, D. J., 2010. “Piezoceramic Composite

Actuators for Flow Control in Low Reynolds Number Airflow,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 12, pp. 1201-1212.

136. Stanton, S. C., Erturk, A., Mann, B. P., and Inman, D. J., 2010. “Nonlinear Piezoelectricity in

Electroelastic Energy Harvesters: Modeling and Experimental Identification,” Journal of Applied Physics, Vol. 108, 074903, 9 pages.

137. Bilgen, O., Erturk, A., and Inman, D.J., 2010. “Analytical and Experimental Characterization of Macro-

Fiber Composite Actuated Thin Clamped-Free Unimorph Benders,” ASME Journal of Vibration and Acoustics, Vol. 132, No. 5, paper 051005, 6 pp.

138. Karami, M. A., Yardimoglu, Y., Inman, D. J., 2010. “Coupled Out of Plane Vibrations of Spiral Beams for

Micro-scale Applications,” Journal of Sound and Vibration, Vol. 329, pp. 5584–5599.

139. Arreita, A., Hagadorn, P. Erturk, A., and Inman, D.J., 2010. “A Piezoelectric Bi-Stable Plate for Nonlinear Broadband Energy Harvesting,” Applied Physics Letters, Vol. 97, 1044102, doi:10.1063/1.3487780.

140. Stanton, S. C., Erturk, A., Mann, B. P., and Inman, D. J., 2010. “Resonant Manifestation of Intrinsic

Nonlinearity within Electroelastic Micropower Generators,” Journal of Applied Physics, Vol. 97, 254101, 3 pages.

141. Erturk, A., Vieira, W.G.R, De Marqui, Jr., C., and Inman, D.J., 2010. “On the Energy Harvesting Potential

of Piezoaeroelastic Systems,” Applied Physics Letters, Vol. 96, paper 184103, 3 pp.

142. Lallart, M. and Inman, D. J., 2010. “Low-Cost Integrable Tuning-Free Converter for Piezoelectric Energy Harvesting Optimization, IEEE Transactions on Power Electronics, Vol. 25, No. 7, pp. 1811-1819.

143. Dao, Z., Ha, D. S., and Inman, D. J., 2010. “Ultra Low-Power Active Wireless Sensor for Structural

Health Monitoring,” Smart Structures and Systems, .Vol. 6, No. 5-6, pp. 675-687.

144. Lallart, M., Anton, S.A., and Inman, D. J., 2010. “Frequency Self-Tuning Scheme for Broadband Vibration Energy Harvesting,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 9, pp. 897-906.

145. De Marqui, Jr., C., Erturk, A. and Inman, D. J., 2010. “Piezoaeroelastic Modeling and Analysis of a

Generator Wing with Continuous and Segmented Electrodes,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 10, pp. 983-993.

146. Grisso, B.L. and Inman, D. J., 2010. “Temperature Corrected Sensor Diagnostics for Impedance-Based

SHM,” Journal of Sound and Vibration, Vol. 329, No. 12, 7 June 2010, pp. 2323-2336.

147. Salehian, A. and Inman, D. J., 2010. “Micropolar Continuous Modeling and Frequency Response Validation of a Lattice Structure,” ASME Journal of Vibration and Acoustics, Vol. 132, No. 1, doi:10.1115/1.4000472

Daniel J. Inman ()

148. Daghia, F., Viola, E., Ubertini, F., and Inman D. J., 2010. “Active Shape Change of an SMA Hybrid Composite Plate,” Smart Structures and Systems, An International Journal, Vol. 6, No. 2, pp.91-100.

149. Lallart, M., Inman, D. J., and Guyomar, D., 2010. “Transient Performance Analysis of Energy Harvesting

Strategies,” Journal of Intelligent Material Systems and Structures, Vol. 9, May, 2010, DOI: 1045389X09358334v1.

150. Mahmoodi, S. M., Ahmadian, A., and Inman, D. J., 2010, “Adaptive Modified Positive Position Feedback

for Active Vibration Control of Structures,” Journal of Intelligent Material Systems and Structures, Vol. 21, No 6, pp. 571-580, doi: 10.1177/1045389X09361631.

151. Inman, D. J. and Wereley, N. M., 2010. “How Long Does it Take to Publish a Paper?” Journal of

Intelligent Material Systems and Structures, Vol. 21, January 2010, pp. 123.

152. Bilgen, O., Kochersberger, K. B., Ohanian, O. J., and Inman, D. J., 2010, “Novel, Bidirectional, Variable-Camber Airfoil via Macro-Fiber Composite Actuators,” AIAA Journal of Aircraft, Vol. 47, No. 1, pp. 303-314.

153. Seigler, T. M., Venkatesan, N., and Inman, D. J., 2009. “An Approach to Force-Feedback Control with

Traveling Wave Ultrasonic Motor,” Journal of Intelligent Material Systems and Structures, December, Vol. 20, No. 12, pp. 1393-1400.

154. Tornabene, F., Viola, E., and Inman, D.J., 2009. “2-d Differential Quadrature Solution for Vibration

Analysis of Functionally Graded Conical Shell and Annular Plate Structures,” Journal of Sound and Vibration, Vol. 328, Issue 3, 11 December 2009, pp. 259-290.

155. Adhikari, S., Friswell, M. I., and Inman, D. J., 2009, “Piezoelectric Energy Harvesting from Broadband

Random Vibrations,” Smart Materials and Structures, Vol. 18, No. 11, 7 pages, doi:10.1088/0964-1726/18/11/115005.

156. Bilgen, O., Kochersberger, K., Inman, D.J., and Ohanian, O.J., 2010. “Macro-fiber Composite Actuated

Simply-Supported Thin Airfoils,” Smart Materials and Structures, Vol. 19, No. 5, doi: 10.1088/0964-1726/19/5/055010, 11 pages.

157. Erturk, A., Hoffman, J., and Inman, D. J., 2009, “Limit Cycle Oscillations of a Piezo-Magneto-Elastic

Structure for Broadband Piezoelectric Energy Harvesting,” Applied Physics Letters, 94, 254102, June 2009, DOI: 10.1063/1.3159815.

158. Bilgen, O., Kochersberger, K. B., and Inman, D. J., 2009. “Macro-Fiber Composite Actuators For A Swept Wing Unmanned Aircraft,” Aeronautical Journal, special issue on Flight Structures Fundamental Research in the USA, publication of the Royal Aeronautical Society, Vol. 113, No. 1144, June 2009, pp. 385-396.

159. Anton, S. A., Park, G. and Inman, D. J., 2009, “Reference-Free Damage Detection using Instantaneous

Baseline Measurements,” AIAA Journal, Volume 47, Number 8, pp. 1952-1964.

160. Ruggiero, E. J. and Inman, D. J., 2009, “Modeling and Vibration Control of an Active Membrane Mirror,” Smart Materials and Structures, Vol. 18, No. 9, doi: 10.1088/0964-1726/18/9/095027.

161. De Marqui, Jr., Carlos, Erturk, Alper, and Inman, D. J., 2009, “An Electromechanical Finite Element

Model for Piezoelectric Energy Harvester Plates,” Journal of Sound and Vibration, Vol. 327, No. 1-2, pp. 9-25.

162. Seigler, T. M., Venkatesan, N., and Inman, D. J., 2009, “An Approach to Force-Feedback Control with

Traveling Wave Ultrasonic Motor,” Journal of Intelligent Material Systems and Structures, Vol. 20, No. 12, pp. 1393-1400.

Daniel J. Inman ()

163. Renno, J. M., Daqaq, M. F., and Inman, D. J., 2009, “On the Optimal Energy Harvesting from a Vibration

Source,” Journal of Sound and Vibration, Vol. 320, No. 1-2, pp. 386-405.

164. Lee, B-L. and Inman, D. J., 2009, “Multifunctional Materials and Structures for Autonomic Systems,” Proceedings of the Institution of Mechanical Engineers, Part I, Journal of Systems and Control Engineering, Vol. 223, No. 14, pp. 431 – 434.

165. Tarazaga, P. A., Halevi, Y., and Inman, D. J., 2009, “Modified Quadratic Compression Method for Mass

and Stiffness Updating,” Mechanical Systems and Signal Processing, Vol. 23, No. 6, pp. 1773-1783.

166. Erturk, A. and Inman, D. J., 2009, “An Experimentally Validated Bimorph Cantilever Model for Piezoelectric Energy Harvesting from Base Excitations,” Smart Materials and Structures, Vol. 18, 025009, 18pp.

167. Renno, J. M. and Inman, D. J., 2009. “Modeling and Control of a Membrane Mirror Strip Actuated Using

Single Piezoelectric Bimorph,” Journal of Vibration and Control, Vol. 15, No. 3, pp. 391-414.

168. Erturk, A., Renno, J., and Inman, D. J., 2009, “Modeling of Piezoelectric Energy Harvesting from an L-Shaped Beam-Mass Structure with an Application to UAVs,” Journal of Intelligent Material Systems and Structures, Vol. 20, No. 5, pp. 529-544.

169. Erturk, A., Tarazaga, P. A., Farmer, J. R., and Inman, D. J., 2009, “Effect of Strain Nodes and Electrode

Configuration on Piezoelectric Energy Harvesting from Cantilevered Beams,” ASME Journal of Vibration and Acoustics, Vol. 131, No. 1, pp. 011010-1 – 011010-11.

170. Allison, T. C., Miller, A. K. and Inman, D. J., 2009, “A Time-Varying Identification Method for Mixed

Response Measurements,” Journal of Sound and Vibration, Vol. 319, No. 3-5, pp. 850-868.

171. Renno, J. M., Inman, D. J., and Chevva, K. R., 2009, “Nonlinear Control of a Membrane Mirror Strip Actuated Axially and in Bending,” AIAA Journal, Vol. 47, No. 3, pp. 484-493.

172. Grisso, B.L. and Inman, D. J., 2008, “Autonomous Hardware Development for Impedance-based Structural

Health Monitoring,” Journal of Smart Structures and Systems, Vol. 4, No. 3, pp. 305-318.

173. Bedekar, V., Inman, D. and Priya, S., 2008, “Detection of Corrosion Using Impedance Spectroscopy”, Ferroelectric Letters, Vol.35, No.1-2, pp.7-16.

174. Park, S. H., Inman, D. J., and Yun, C. B., 2008, “An Outlier Analysis of MFC-Based Impedance Sensing

Data for Wireless Structural Health Monitoring,” Journal of Engineering Structures, Vol. 30, pp. 2792-2799.

175. Erturk, A. and Inman, D. J., 2008, “Issues in Mathematical Modeling of Piezoelectric Energy Harvesters,”

Smart Materials and Structures, Vol. 17, 065016, 14 pp.

176. Park, S. H., Yun, C. B., and Inman, D. J., 2008, “Damage Diagnosis for Critical Members of Civil Infrastructures Using Electro-Mechanical Impedance Sensors,” Journal of Fatigue and Fracture of Engineering Materials and Structures, Vol. 31, No. 8, pp. 714-724.

177. Erturk, A. and Inman, D. J., 2008, “Comment on ‘Modeling and analysis of a Bimorph Piezoelectric

Cantilever Beam for Voltage Generation,” Smart Materials and Structures, Vol. 17, 058001, 3 pp.

178. Erturk, A., Bilgen, O., and Inman, D. J., 2008, “Power Generation and Shunt Damping Performance of a Single Crystal Lead Magnesium Niobate-Lead Zirconate Titanate Unimorph: Analysis and Experiment,” Applied Physics Letters; Vol. 93, No. 22, 224102, 3 pp.

Daniel J. Inman ()

179. Sodano, H.A. and Inman, D. J., 2008, “Modeling of a New Active Eddy Current Vibration Control System,” ASME Journal of Dynamic Systems, Measurement And Control; Vol. 130, No. 2, 021009-1-11.

180. Salehian, A. and Inman, D. J., 2008, “Dynamic Analysis of a Lattice Structure by Homogenization:

Experimental Validation,” Journal of Sound and Vibration; Vol. 316, pp. 180-197.

181. Erturk, A. and Inman, D. J., 2008, “On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters,” Journal of Intelligent Material Systems and Structures; Vol. 19, No. 11, pp. 1311-1325.

182. Alhazza, K., Daqaq, M., Nayfeh, A., and Inman, D. J., 2008, “Nonlinear Vibrations of Parametrically-

Excited Cantilever Beams subjected to Nonlinear Delayed-Feedback Control,” International Journal of Non-Linear Mechanics; Vol 43, No. 8, pp. 801-812.

183. Erturk, A. and Inman, D. J., 2008, “A Distributed Parameter Electromechanical Model for Cantilevered

Piezoelectric Energy Harvesters,” ASME Journal of Vibration and Acoustics; Vol. 130, No. 4, 041002, 15pp.

184. Allison, T. C., Miller, A. K., and Inman, D. J., 2008, “A Deconvolution-Based Approach to Structural

Dynamics System Identification and Response Prediction,” ASME Journal of Vibration and Acoustics; Vol. 130, No. 3, 031010, 8 pp.

185. Park, S. H., Lee, J. J., Yun, C. B., and Inman, D. J., 2008, “Electro-Mechanical Impedance-Based Wireless

Structural Health Monitoring Using PCA-Data Compression and k-means Clustering Algorithms,” Journal of Intelligent Material Systems and Structure; Vol . 19, No. 4, pp. 509-520.

186. Park, S. H., Inman, D. J., Lee, J. J., and Yun, C. B., 2008, “Piezoelectric Sensor-Based Health Monitoring

of Railroad Tracks Using a Two-Step Support Vector Machine Classifier,” ASCE Journal of Infrastructure Systems; Vol. 14, No. 1, pp. 80-88.

187. Daghia, F., Inman, D. J., Ubertini, F., and Viola, E., 2008, “Shape Memory Alloy Hybrid Composite Plates

for Shape and Stiffness Control,” Journal of Intelligent Material Systems and Structures; Vol. 19, No. 5, pp. 609-619.

188. Park, S. H., Yun, C. B., and Inman, D. J., 2007, “Remote Impedance-Based Loose Bolt Inspection Using a

Radio-Frequency Active Sensing Node,” Journal of the Korean Society of Nondestructive Testing; Vol. 27, No. 3, pp. 217-223.

189. Peairs, D. M., Tarazaga, P. A., and Inman, D. J., 2007, “Frequency Range Selection for Impedance-Based

Structural Health Monitoring,” ASME Journal of Vibration and Acoustics; Vol. 126, No. 6, pp. 701-709.

190. Allison, T. C., Miller, A. K., and Inman, D. J., 2007, “Free-Response Simulation via the Proper Orthogonal Decomposition,” AIAA Journal; Vol. 45. No. 10, pp. 2538 - 2564.

191. Sodano, H. A. and Inman, D. J., 2007, “Closure: Improved Concept and Model of Eddy Current Damper,”

ASME Journal of Vibration and Acoustics, Vol. 129, No. 4, pp. 530.

192. Renno, J. M. and Inman, D. J., 2007, “Experimentally Validated Model of a Membrane Strip with Multiple Actuators,” AIAA Journal of Spacecraft and Rockets; Vol. 44, No. 5, pp. 1140-1152.

193. Park, S. H., Grisso, B. L., Inman, D. J., and Yun, C. B., 2007, “MFC-Based Structural Health Monitoring

Using a Miniaturized Impedance Measuring Chip for Corrosion Detection,” Journal of Research in Nondestructive Evaluation; Vol. 18, No. 2, pp. 139-150.

Daniel J. Inman ()

194. Park, S. H., Lee, J. J., Inman, D. J., and Yun, C. B., 2007, “A Built-In Active Sensing System-Based Structural Health Monitoring Technique Using Statistical Pattern Recognition,” Journal of Mechanical Science and Technology; Vol. 21, pp. 896-902.

195. Erturk, A. and Inman, D. J., 2007, “On the Fundamental Transverse Vibration Frequency of a Free-Free

Thin Beam With Identical End Masses,” ASME Journal of Vibration and Acoustics; Vol. 129, No. 5, pp. 656-662.

196. Renno, J. M and Inman, D. J., 2007, “An Experimentally Verified Model of a Membrane Mirror Strip

Actuated Using a Piezoelectric Bimorph,” ASME Journal of Vibration and Acoustics; Vol. 129, No. 5, pp. 631-640.

197. Tarazaga, P. A., Inman, D. J. and Wilkie W. K., 2007, “Control of a Space Rigidizable Inflatable Boom

Using Macro-Fiber Composite Actuators,” Journal of Vibration and Control; Vol. 13, No. 7, pp. 935-950.

198. Salehian, A., Seigler, T. M., and Inman, D. J., 2007, “Dynamic Effects of a Radar Panel Mounted on a Truss Satellite,” AIAA Journal; Vol. 45, No. 7, pp. 1642-1654.

199. Seigler, T. M., Neal, D. A., Bae, J. -S., and Inman, D. J., 2007. “Modeling and Flight Control of Large-

Scale Morphing Aircraft,” AIAA Journal of Aircraft; Vol. 44, No. 4, pp. 1077-1087.

200. Kasarda, M. E., Terpenny, J. P., Inman, D. J., Precoda, K. R., Jelesko, J., Sahin, A., and Park, J., 2007. “Design for Adaptability (DFAD) – A New Concept for Achieving Sustainable Design,” Robotics and Computer-Integrated Manufacturing, Vol. 23, No. 6, pp. 727-734.

201. Sodano, H. A. and Inman, D. J., 2007. “Non-Contact Vibration Control System Employing an Active Eddy

Current Damper,” Journal of Sound and Vibration, Vol. 305, No. 4-5, pp. 596-613.

202. Wang, K and Inman, D. J., 2007. “Crack-Induced Effects on Aeroelasticity of an Unswept Composite Wing,” AIAA Journal, Vol. 45, No. 3, pp. 542-551.

203. Peairs, D. M., Inman, D. J., and Park, G., 2007. “Circuit Analysis of Impedance-Based Health Monitoring

of Beams Using Spectral Elements,” Structural Health Monitoring, Vol. 6, No. 1, March, pp. 81-94.

204. Friswell, M.I., Sawicki, J. T., Inman, D. J., and Lees, A. W., 2007. “The Response of Rotating Machines on Viscoelastic Supports,” International Review of Mechanical Engineering, Vol. 1, No. 1, January, pp. 41-51.

205. Sodano, H.A., Simmers, G.E., Dereux, R., and Inman, D. J., 2007. “Recharging Batteries using Energy

Harvested from Thermal Gradients,” Journal of Intelligent Material Systems and Structures, Vol. 18, No. 1, pp. 3-10.

206. Tarazaga, P. A., Halevi, Y. and Inman, D. J., 2007. “The Quadratic Compression Method for Model

Updating and Its Noise Filtering Properties,” Mechanical Systems and Signal Processing, Vol. 21, pp. 58-73.

207. Sodano, H. A., Lloyd, J., and Inman, D. J., 2006, “An Experimental Comparison between Several Active

Composite Actuators for Power Generation,” Smart Materials and Structures, Vol. 15, pp. 1211-1216.

208. Park, S. H., Yun, C. B., and Inman, D. J., 2006. “Wireless Structural Health Monitoring Using an Active Sensing Node,” International Journal of Steel Structures, Vol. 6, No. 5, pp. 361-368.

209. Simmers, G. E., Jr., Sodano, H. A., Park, G., and Inman, D. J., 2006. “Detection of Corrosion using

Piezoelectric Impedance Based Structural Health Monitoring,” AIAA Journal, Vol. 44, No.11, pp. 2800-2803.

Daniel J. Inman ()

210. Sodano, H. A., Bae, J. S., Inman, D. J., and Belvin, W. K., 2006. “Modeling and Application of Passive Eddy Current Damper for the Suppression of Membrane Vibrations,” AIAA Journal, Vol. 44, No. 3, pp. 541-549.

211. Park, G. and Inman, D. J., 2006, “Structural Health Monitoring Using Piezoelectric Impedance

Measurements,” Philosophical Transactions of the Royal Society, A., Vol. 365, pp. 373-392.

212. Sodano, H.A., Inman, D. J., and Belvin, W.K., 2006. “Development of a New Passive-Active Magnetic Damper for Vibration Suppression,” ASME Journal of Vibration and Acoustics, Vol. 128, No. 3, pp. 318-327.

213. Williams, R. B., Inman, D. J. and Wilkie, W. K., 2006. “Nonlinear Response of the Macro Fiber

Composite Actuator to Monotonically Increasing Excitation Voltage,” Journal of Intelligent Systems and Structures, Vol. 17, No. 7, pp. 601-608.

214. Salehian, A., Cliff, E.M., and Inman, D. J., 2006. “Continuum Modeling of an Innovative Space-Based

Radar Antenna Truss,” ASCE Journal of Aerospace Engineering - Festschrift Issue, Vol. 19, No. 4, pp. 227-240.

215. Antonios, C., Inman, D. J., and Samali, A., 2006. “Experimental and Theoretical Behavior of Self-Healing

Bolted Joints,” Journal of Intelligent Material Systems and Structures, Vol. 17, No. 6, pp. 499-509.

216. Sodano, H.A., Bae, J.S., Inman, D. J. and Belvin, W.K., 2006. “Improved Concept and Model of Eddy Current Damper,” ASME Journal of Vibration and Acoustics, Vol. 128, No. 3, pp. 294-302.

217. Wilkie, W. K., Inman, D. J., Lloyd, J. M., and High, J. W., 2006. “Anisotropic Laminar Piezocomposite

Actuator Incorporating Machined PMN-PT Single Crystal Fibers,” Journal of Intelligent Material Systems and Structures, Vol. 17, No. 1, pp. 15-28.

218. Ruggiero, Eric J. and Daniel J. Inman. 2006. “Gossamer Spacecraft: Recent Trends in Design, Analysis,

Experimentation, and Control,” Journal of Spacecraft and Rockets, Vol. 43, No. 1, pp. 10-24.

219. Wang, K., Inman, D. J., and Farrar, C. R., 2005. “Crack-Induced Changes in Divergence and Flutter of Cantilevered Composite Panels,” International Journal of Structural Health Monitoring, Vol. 4, No. 4, pp. 377-392.

220. Quinn, D. D., Mani, G. Kasarda, M. E. F., Bash, T., Inman, D. J. and Kirk, R. G., 2005. “Damage

Detection of a Rotating Cracked Shaft Using An Active Magnetic Bearing As a Force Actuator,” IEEE/ASME Transactions on Mechatronics, Vol. 10, No. 6, pp. 640-647.

221. Sodano, H.A., Park, G., and Inman, D. J., 2005, “Comparison of Piezoelectric Energy Harvesting Devices

for Recharging Batteries,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 10, pp. 799-808.

222. Rutherford, A., Inman, D. J., Park, G., and Hemez, F. M., 2005. “Use of Response Surface Metamodels for

Identification of Stiffness and Damping Coefficients in a Simple Dynamic System,” Shock and Vibration, Vol. 12, No. 5, pp. 317-332.

223. Wang, K., Inman, D. J., and Farrar, C. R., 2005. “Modeling and Analysis of a Cracked Composite

Cantilever Beam Vibrating in Coupled Bending and Torsion,” Journal of Sound and Vibration, Vol. 284, Issues 1-2, pp. 23-49.

224. Bae, J.-S., Kyong, H.-H., Seigler, T. M., and Inman, D. J., 2005. “Aeroelastic Considerations on Shape

Control of an Adaptive Wing,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 11/12, pp. 1051-1056.

Daniel J. Inman ()

225. Bae, J. S., Kwak, M. K., and Inman, D. J., 2005. “Vibration Suppression of Cantilever Beam Using Eddy Current Damper,” Journal of Sound and Vibration, Vol. 284, No. 3-5, pp. 805-824.

226. Bae, J.S., Kim, J.Y., Lee, I., Matsuzaki, Y., and Inman, D. J., 2005. “Extension of Flutter Prediction

Parameter for Multimode Flutter Systems,” AIAA Journal of Aircraft, Vol. 42, No. 1, pp. 285-288.

227. Sodano, H., Inman, D. J., and Park, G., 2005. “Generation and Storage of Electricity from Power Harvesting Devices,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 1, pp. 67-75.

228. Asmatulu, R., Claus, R. O., Mecham, J.B., and Inman, D. J., 2005. “Improving the Damping Properties of

Composites Using Ferroelectric Inclusions,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 5, pp. 463-468.

229. Sodano, H. A., Park, G., and Inman, D. J. 2005. “Multiple Sensors and Actuators for Vibration

Suppression of an Inflated Torus,” AIAA Journal of Spacecraft and Rockets, Vol. 42, No. 2, pp. 370-373.

230. Sodano, H.A., Bae, J.S., Inman, D. J. and Belvin, W.K., 2005, “Concept and Model of Eddy Current Damper for Vibration Suppression of a Beam,” Journal of Sound and Vibration, Vol. 288, pp. 1177-1196.

231. Bae, J. S., Seigler, T. M., and Inman, D. J., 2005. “Aerodynamic and Static Aeroelastic Characteristics of a

Variable-Span Morphing Wing,” AIAA Journal of Aircraft, Vol. 42, No. 2, pp. 528-534.

232. Halevi, Y., Morales, C., and Inman, D. J., 2005. “Combined Expansion and Orthogonalization of Experimental Modeshapes,” ASME Journal of Vibration and Acoustics, Vol. 127, No. 2, pp. 188-196.

233. Ruggiero, E.J., Park, G. and Inman, D. J., 2005. “A Comparison Between SISO and MIMO Modal

Analysis Techniques On A Membrane Mirror Satellite,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 3, March 2005, pp. 273-282.

234. Gern, F., D. J. Inman, and R. K. Kapania, 2005. “Computation of Actuation Power Requirements for

Smart Wings with Morphing Airfoils,” AIAA Journal, Vol. 43, No. 12, pp. 2481-2486.

235. Da Silva, L., Austin, E. M., and Inman, D. J., 2005. “Time-Varying Controller for Temperature-Dependent Viscoelasticity,” ASME Journal of Vibration and Acoustics, Vol. 127, No. 3, pp. 215-222.

236. Jha, A. and Inman, D. J., 2004. “Sliding Mode Control of a Gossamer Structure Using Smart Materials,”

Journal of Vibration and Control, Vol. 10, pp. 1199-1220.

237. Grisso, B. L., Peairs, D. M., and Inman, D. J., 2004. “Detecting Damage in Graphite/Epoxy Composites using Impedance-Based Structural Health Monitoring,” Applied Mechanics and Materials: Advances in Experimental Techniques, Vols. 1-2, pp. 185-190.

238. Hesse, T., Ghorashi, M. and Inman, D. J., 2004. “Shape Memory Alloy in Tension and Compression and

Its Application as Clamping-Force Actuator in a Bolted Joint: Part 1 - Experimentation,” Journal of Intelligent Material Systems and Structures, Vol. 15, No. 8, August 2004, pp. 577-587.

239. Ghorashi, M. and Inman, D. J., 2004. “Shape Memory Alloy in Tension and Compression and Its

Application as Clamping-Force Actuator in a Bolted Joint: Part 2 - Modeling,” Journal of Intelligent Material Systems and Structures , Vol. 15, No. 8, August 2004, pp. 589-600.

240. Natarajan, A., Kapania, R. K., and Inman , D. J., 2004. “Aeroelastic Optimization of Adaptive Bumps for

Yaw Control,” AIAA Journal of Aircraft, Vol. 41, No. 1, pp. 175-185.

241. Peairs, D., Park, G and Inman, D. J., 2004. “Practical Issues of Activating Self-repairing Bolted Joints,” Smart Materials and Structures, Vol. 13, pp. 1414-1223.

Daniel J. Inman ()

242. Sodano, H. A., Park, G., and Inman, D. J., 2004. “Estimation of Electric Charge Output for Piezoelectric Energy Harvesting,” International Journal for Strain Measurement, Vol. 40, No. 2, May, pp. 49-58.

243. Yardimoglu, B. and Inman, D. J., 2004. “Coupled Bending-Bending-Torsion Vibration of a Rotating Pre-

Twisted Beam with Aerofoil Cross-Section and Flexible Root by Finite Element Method,” Shock and Vibration, Vol. 11, pp. 637-646.

244. Williams, R.B., Inman, D. J. and Wilkie, W. K., 2004. “Temperature-Dependent Thermoelastic Properties

for Macro Fiber Composite Actuators,” Journal of Thermal Stresses, Vol. 27, No. 10, pp. 903-915.

245. Bae, J. S., Inman, D. J., and Lee, I., 2004. “Effects of Structural Nonlinearity on Subsonic Aeroelastic Characteristics of an Aircraft Wing with Control Surface,” Journal of Fluids and Structures; Vol. 19, pp. 747-763.

246. Ruggiero, E. J., Park, G., and Inman, D. J., 2004. “Multi-Input Multi-Output Vibration Testing of an

Inflatable Torus,” Mechanical Systems and Signal Processing, Vol. 18, Issue 5, September, pp. 1187-1201.

247. Peairs, D. M., Park, G., and Inman, D. J., 2004. “Improving Accessibility of the Impedance-Based Structural Health Monitoring Method,” Journal of Intelligent Material Systems and Structures, Vol. 15, No. 2, pp. 129-139.

248. Natarajan, A., Kapania, R. K., and Inman, D. J., 2004. “Analysis of Time-Variant Aeroelastic Systems

Using Neural Network,” AIAA Journal; Vol. 42, No. 9, pp. 1933-1936.

249. Sodano, H. A., Park, G., and Inman, D. J., 2004. “An Investigation into the Performance of Macro-Fiber Composites for Sensing and Structural Vibration Applications,” Mechanical Systems and Signal Processing; Vol. 18, No. 3, pp. 683-697.

250. Williams, R. B., Inman, D. J., Schultz, M. R., Hyer, M. W., and Wilkie, W. K., 2004. “Nonlinear Tensile

and Shear Behavior of Macro Fiber Composite Actuators,” Journal of Composite Materials, Vol. 38, No. 10, pp. 855-869

251. Starek, L. and Inman, D. J., 2004. “Design of Nonproportional Damped Systems via Symmetric Positive Inverse Problems,” ASME Journal of Vibration and Acoustics; Vol. 126, No. 2, pp. 212-219.

252. Sodano, H., Park, G., and Inman, D. J., 2004. “A Review of Power Harvesting from Vibration using

Piezoelectric Materials,” Shock and Vibration Digest, Vol. 36, No. 3, May, pp. 197-205.

253. Jha, A. and Inman, D. J., 2004. “Importance of Geometric Nonlinearity and Follower Pressure Load in the Dynamic Analysis of a Gossamer Structure,” Journal of Sound and Vibration, Vol. 278, pp. 207-231.

254. Williams, R. B., Grimsley, B. W., Inman, D. J., and Wilkie, W. K., 2004. “Manufacturing and Cure

Kinetics Modeling for Macro Fiber Composite Actuators,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 16, pp. 1741-1754.

255. Jha, A. and Inman, D. J., 2003. “Optimal Size and Placement of Piezoelectric Actuators and Sensors for an

Inflated Torus,” Journal of Intelligent Material Systems and Structures, Vol. 14, No. 9, pp. 563-576.

256. Park, G., Sohn, H., Farrar, C. R., and Inman, D. J., 2003. “Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward,” Shock and Vibration Digest, Vol. 35, No. 6, pp. 451-463.

257. Park, G., Sausse, M., Inman, D. J., Main, J., 2003. “Vibration Testing and Finite Element Analysis of an

Inflatable Structure,” AIAA Journal, Vol. 41, No. 8, August, 2003, pp. 1556-1563.

258. Park, G., Muntges, D.E., and Inman D. J., 2003. “Self-Repairing Joints Employing Shape Memory Alloy Actuators,” JOM-Journal of Minerals, Metals & Materials, Vol. 55, No. 12, pp. 33-37.

Daniel J. Inman ()

259. Kim, M.-H., Inman D. J., 2003. “Direct Adaptive Control of Underwater Vehicles Using Neural

Networks, Journal of Vibration and Control, Vol. 9, No. 5, pp. 605-619.

260. Park, Chul H. and Inman, Daniel J., 2003. “Enhanced Piezoelectric Shunt Design,” Shock and Vibration, Vol. 10, No. 2, pp. 127-133.

261. Ruggiero, Eric J., Jha, Akhilesh, Park, Gyuhae, and Inman, Daniel J., 2003. “A Literature Review of Ultra-

Light and Inflated Toroidal Satellite Components,” Shock and Vibration Digest, Vol. 35, No. 3, May, 2003, pp. 171-181.

262. Yoo, H. H., Kim, J. Y. and Inman, D. J., 2002. “Modal Analysis of Rotating Composite Cantilevered

Plates,” Journal of Sound and Vibration, Vol. 258, No. 2, pp. 233-246.

263. Yoo, H. H., Kim, J. Y. and Inman, D. J., 2002. “Vibration Localization of Simplified Mistuned Cyclic Structures Undertaking External Harmonic Force,” Journal of Sound and Vibration, Vol. 261, No. 5, pp. 859-870.

264. Natarajan, Anand, Kapania, Rakesh, K., and Inman, Daniel, J., 2002. “Near-Exact Analytical Solutions of

Linear Time- Variant Systems,” AIAA Journal, Vol. 40, No. 11, November, pp. 2362-2366.

265. Lewis, J. A. and Inman, D. J., 2002. “Finite Element Modeling and Active Control of an Inflated Torus Using Piezoelectric Devices,” Journal of Intelligent Material Systems and Structures, Vol. 12, No 12, December 2001, pp 819-834.

266. Gern, F. H., Inman, D. J., and Kapania, R. K., 2002. “Structural and Aeroelastic Modeling of General

Planform Wings with Morphing Airfoils” AIAA Journal, Vol. 40, No. 4, April 2002, pp. 628-637.

267. Jha, A., Inman, D. J., and Plaut, R. H., 2002. “Free Vibration Analysis of an Inflated Toroidal Shell”, ASME Journal of Vibration and Acoustics, Vol. 124, No. 3, July 2002, pp. 387-396.

268. Inman, D. J., Ahmadian, M. and Claus, R. O., 2002. “Simultaneous Active Damping and Health

Monitoring of Aircraft Panels,” Journal of Intelligent Material Systems and Structures, Vol. 12, No. 11, November 2001, (printed in July 2002) pp. 775-785.

269. Steffen, V., Jr., and Inman, D. J., 2002. “On the Optimization of Piezoelectric Actuators for Thin Plate

Excitation,” Nonlinear Dynamics, Chaos, Control, and Their Applications to Engineering Sciences, Balthazar, J. M, Goncalves, B. P., and Brasil, R., Eds., Vol. 4, 2002, pp. 194-207.

270. Lewis, J. A. and Inman, D. J., 2002. “Finite Element Modeling and Active Control of an Inflated Torus

Using Piezoelectric Devices”, Journal of Intelligent Material Systems and Structures, Vol. 12, No. 12, December 2001 (printed in August, 2002), pp. 819-834.

271. Carneiro, S.H.S. and Inman, D. J., 2002, “Continuous Model for the Transverse Vibration of Cracked

Timoshenko Beams,” ASME Journal of Vibration and Acoustics, Vol. 124, April, 2002, pp. 310-320.

272. Park, G., Ruggiero, E. and Inman, D. J., 2002, “Dynamic Testing of Inflatable Structures using Smart Materials”, Smart Materials and Structures, Vol. 11, pp 147-155.

273. Pokines, B. J., Tani, J., Esashi, M., Hamano, T. Mizuno, K. and Inman, D. J., 2002. “Active Material

Micro-Actuator Arrays Fabricated with SU-8 Resin,” Microsystem Technologies, Vol. 7, pp. 117-119.

274. Williams, R. B., Austin, E. M. and Inman, D. J., 2002. “Local Effects of Piezopolymer Patches on Inflatable Space-Based Structures,” AIAA Journal of Spacecraft and Rockets, Vol. 39, No. 2, March-April 2002, pp. 299-305.

Daniel J. Inman ()

275. Jha, A. K. and Inman, D. J., 2002. “Piezoelectric Actuator and Sensor Models for an Inflated Toroidal Shell,” Mechanical Systems and Signal Processing, Vol. 16, No 1, pp. 97-122.

276. Park, G., Kim, M., and Inman, D. J., 2001. “Integration of Smart Materials into Dynamics and Control of

Inflatable Space Structures,” Journal of Intelligent Material Systems and Structures, Vol. 12, No. 6, pp. 423-433.

277. Moriera, F.J.O., Arruda, J. R. F., and Inman, D. J., 2001. “Design of a Reduced Order H infinity Controller

for Smart Structure Satellite Applications,” Philosophical Transactions of the Royal Society , Vol. 359, No 1781, 15 Nov. 2001, pp. 2251-2269.

278. Hegewald, T., and Inman, D. J., 2001. “Vibration Suppression via Smart Structures Across a Temperature

Range”, Journal of Intelligent Material Systems and Structures, Vol. 12, No. 3, pp. 191-203.

279. Park, G., Cudney, H., and Inman, D. J., 2001. “Feasibility of Using Impedance-Based Damage Assessment for Pipeline Structures,” Earthquake Engineering and Structural Dynamic, Vol. 30, pp. 1463-1474.

280. Rusovici, R., Lesieutre, G. and Inman, D. J., 2001. “Modeling of Shock Propagation and Attenuation in

Viscoelastic Components”, Shock and Vibration, Vol. 8, No. 5, pp. 287-301.

281. Williams, R. Brett, Austin, Eric M., and Inman, Daniel J., 2001. “Limitations of Using Membrane Theory for Modeling PVDF Patches on Inflatable Structures,” Journal of Intelligent Material Systems and Structures,Vol. 12, No. 1, January 2001, pp. 11-20 (appeared September 2001).

282. Kim, M-H., and Inman, D. J., 2001. “Reduction of observation spillover in vibration suppression using a

sliding mode observer”, Journal of Vibration and Control, Vol. 7, No. 7, October, 2001, pp. 1087-1105.

283. Ahmadian, M., Jeric, K. A., and Inman, D. J., 2001. “An Experimental Evaluation of Smart Damping Materials for Reducing Structural Noise and Vibrations,” ASME Journal of Vibration and Acoustics; Vol. 123, October 2001, pp. 533-535.

284. Agnes, Gregory S. and Inman, D. J., 2001. “Performance of Nonlinear Vibration Absorbers for Multi-

Degree-of-Freedom Systems Using Nonlinear Normal Modes,” Nonlinear Dynamics, Volume 15, Number (1-3), pp. 275-292, July 2001.

285. Carneiro, S. H. S. and Inman, Daniel J., 2001. “Comments on the Free Vibrations of Beams with a Single-

Edge Crack,” Journal of Sound and Vibration; Vol. 244, No 4, 19 July 2001, pages 729-737.

286. Austin, Eric M. and Inman, Daniel J., 2001. “A Hybrid C Finite Element Capable of Interlaminar Stress Continuity,” Computers and Structures, Vol. 79, pp. 973-986.

287. Park, G., Cudney, H., Inman, D. J., 2001. “An Integrated Health Monitoring Technique using Structural

Impedance Sensors,” Journal of Intelligent Material Systems and Structures, Vol. 11, No. 6, June 2000, pp. 448-455.

288. Starek, L., and Inman, D. J., 2001. “Symmetric Inverse Eigenvalue Vibration Problem and Its

Application,” Mechanical Systems and Signal Processing, Vol. 15, No. 1, pp. 11-29.

289. Lopes, Jr. V., Park, G., Cudney, H., and Inman, D. J., 2001. “Impedance-Based Structural Health Monitoring with Artificial Neural Networks,” Journal of Intelligent Material Systems and Structures, Vol. 11, No. 3, pp. 206-214.

290. Inman, D. J., 2001. “Active Modal Control for Smart Structures,” Philosophical Transactions of the Royal

Society (special issue); Vol. 359, No. 1778, pp. 205-219.

�

1

Daniel J. Inman ()

291. Austin, E. A. and Inman, D. J., 2000. “Some Pitfalls of Simplified Modeling for Viscoelastic Sandwich Beams,” ASME Journal of Vibration and Acoustics, Vol. 122, No. 4, pp. 434-439.

292. Cattarius, J. and Inman, D. J., 2000. “Experimental Verification of Intelligent Fault Detection in Rotor

Blades,” International Journal of Systems Science, Vol. 31 No. 11, pp. 1375-1379.

293. Park, G., Cudney, H., and Inman, D. J., 2000. “Impedance-Based Health Monitoring of Civil Structural Components,” ASCE Journal of Infrastructure Systems, Vol. 6, No. 4, pp. 153-160.

294. Friswell, M. I., and Inman, D. J., 2000. “Sensor Validation for Smart Structures,” Journal of Intelligent

Material Systems and Structures, Vol. 10, No. 12, pp. 973-982.

295. Steffen, V., Jr. and Inman, D. J., 2000. “Optimal Design of Piezoelectric Materials for Vibration Damping in Mechanical Systems,” Journal of Intelligent Material Systems and Structures, Vol. 10, No.12, pp. 945-955.

296. Steffen, V. and Inman, D. J., 2000. “Using Passive Techniques for Vibration Damping in Mechanical

Systems,” Journal of the Brazilian Society of Mechanical Science, Vol. XXII, No.3, pp.411-421.

297. Lam, M. J., Saunders, W. R., and Inman, D. J., 2000. “Hybrid Damping Models using Golla-Hughes-McTavish Method with Internally Balanced Model Reduction and Output Feedback,” Smart Materials and Structures (special issue on Micromechanics, Intelligent Materials, and Robotics); Vol. 9, No.3, pp. 362-371.

298. Rietz, R. W. and Inman, D. J., 2000. “Comparison of Linear and Nonlinear Control of a Slewing Beam,”

Journal of Vibration and Control, Vol. 6, No. 2, pp. 309-322.

299. Sciulli, Dino, and Inman, Daniel J., 1999. “Isolation Design for Fully Flexible Systems,” Journal of Intelligent Material Systems and Structures, Vol. 10, No. 10, pp. 813-824.

300. Ram, Y. M. and Inman, D. J., 1999. “Optimal Control for Vibrating Systems,” Mechanical Systems and

Signal Processing, Vol. 13, No. 6, pp. 879-892.

301. Friswell, M. I. and Inman, D. J., 1999. “Reduced-Order Models of Structures with Viscoelastic Components,” AIAA Journal, Vol. 37, No. 10, pp. 1318-1325.

302. Friswell, M. I. and Inman, D. J., 1999. “The Relationship Between Positive Position Feedback and Output

Feedback Controllers,” Smart Materials and Structures, Vol. 8, pp. 285-291.

303. Schulz, M., Pai, P. F., and Inman, D. J., 1999. “Health Monitoring and Active Control of Composite Structures Using Piezoceramic Patches,” Special Issue, Composites: Part B, Vol. 30, pp. 713-725.

304. Gade, P. V. N. and Inman, D. J., 1999. “Robust Adaptive Control of Store Release Event for Wings with

External Stores,” AIAA Journal of Guidance, Control and Dynamics, Vol. 22, No. 3, pp. 408-414.

305. Leo, D. J. and Inman, D. J., 1999. “A Quadratic Programming Approach to the Design of Active-Passive Vibration Isolation Systems,” Journal of Sound and Vibration, Vol. 220, No. 5, pp. 807-825.

306. Park, G., Kabeya, K., Cudney, H. H. and Inman, D. J., 1999. “Impedance-Based Structural Health

Monitoring for Temperature Varying Applications,” JSME International Journal, Series A, Vol. 42, No. 2, pp. 249-258.

307. Park, C. H., Inman, D. J., and Lam, M. J., 1999. “Model Reduction of Viscoelastic Finite Element Models,”

Journal of Sound and Vibration, Vol. 219, No. 4, pp. 619-637.

Daniel J. Inman ()

308. Banks, H. T., Bergman, L. A., Inman, D. J., and Luo, Z., 1998. “On the Existence of Normal Modes of Damped Discrete Continuous Systems,” Journal of Applied Mechanics, Vol. 65, No. 4, pp. 980-989.

309. Atalla, M. J. and Inman, D. J., 1998. “On Model Updating Using Neural Networks,” Mechanical Systems

and Signal Processing, Vol. 12, No. 1, pp. 135-161.

310. Pilkey, D. F., Ribbens, C. J. and Inman, D. J., 1998. “High Performance Computing Issues for Model Reduction/Expansion,” Advances in Engineering Software, Vol. 29, No. 3-6, pp. 389-393.

311. Friswell, M. I., Inman, D. J. and Pilkey, D. F., 1998. “Direct Updating of Damping and Stiffness Matrices,”

AIAA Journal, Vol. 36, No. 3, pp. 491-493.

312. Gade, P. V. N. and Inman, D. J., 1998. “Active Control of Store Induced Flutter in Incompressible Flow,” Journal of Aircraft, Vol. 35, No. 3, May-June 1998, pp. 454-461.

313. Sciulli, D. and Inman, D. J., 1998. “Isolation Design for a Flexible System,” Journal of Sound and

Vibration, Vol. 216, No. 2, pp. 251-267.

314. Friswell, M. I., Inman, D. J., and Rietz, R. W., 1997. “Active Damping of Thermally Induced Vibrations,” Journal of Intelligent Material Systems and Structures, Vol. 8, No. 8, pp. 678-685.

315. Lam, M. I., Inman, D. J., and Saunders, W. R., 1997. “Vibration Control through Passive Constrained

Layer Damping and Active Control,” Journal of Intelligent Material Systems and Structures, Vol. 8, No. 8, pp. 663-677.

316. Friswell, M. I., Inman, D. J., and Lam, M. J., 1997. “On the Realisation of GHM Models in

Viscoelasticity,” Journal of Intelligent Material Systems and Structures, Vol. 8, No. 11, pp. 986-993.

317. Atalla, M. J. and Inman, D. J., 1997. “Adaptive Control Using Updated Models,” in Nonlinear Dynamics, Chaos, Control and Their Application to Engineering Sciences, Balthazar, J. M., Mook, D. T., and Rosario, J. M., Eds., Vol. 1, pp. 295-300.

318. Leo, D. J. and Inman, D. J., 1997. “Convex Control Design for Vibration Induced by Uncertain

Excitations,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 69-71, pp. 105-119.

319. Cattarius, J. and Inman, D. J., 1997. “Time Domain Analysis for Damage Detection in Smart Structures,” Journal of Mechanical Systems and Signal Processing, Vol. 11, No. 3, pp. 409-423.

320. Cattarius, J. and Inman, D. J., 1997. “Some Notes About 'Time Domain Analysis for Damage Detection in

Smart Structures' - Response,” Journal of Mechanical Systems and Signal Processing, Vol. 11, No. 6, pp. 918-920.

321. Soutas-Little, R. W. and Inman, D. J., 1997. “Calculus Reform to Mechanics Reform,” International

Journal of Engineering Education, Vol. 13, No. 6, pp. 442-447.

322. Slater, J. C. and Inman, D. J., 1997. “On the Effect of Weak Non-linearities on Linear Controllability and Observability Norms: An Invariant Manifold Approach,” Journal of Sound and Vibration, Vol. 199, No. 3, pp. 417-429.

323. Gade, P. V. N. and Inman, D. J., 1997. “2-D Active Wing/Store Flutter Suppression Using H-infinity

Theory,” AIAA Journal of Guidance, Control and Dynamics, Vol. 20, No. 5, pp. 949-955.

324. Starek, L. and Inman, D. J., 1997. “A Symmetric Inverse Vibration Problem for Non-Proportional Underdamped Systems,” ASME Journal of Applied Mechanics, Vol. 64, No. 3, pp. 601-605.

Daniel J. Inman ()

325. Parker, G. G., Segalman, D. J., Robinett, R. D. and Inman, D. J., 1996. “Decentralized Sliding Mode Control for Flexible Link Robots,” Journal of Intelligent and Robotic Systems, Vol. 17, pp. 61-79.

326. Agnes, G. S. and Inman, D. J., 1996. “Nonlinear Piezoelectric Vibration Absorber,” Smart Materials and

Structures, Vol. 5, pp. 704-714.

327. Huang, S.-C., Inman, D. J., and Austin, E. M., 1996. “Some Design Considerations for Active and Passive Constrained Layer Damping Treatment,” Journal of Smart Materials and Structures, Vol. 5, No. 3, pp. 301-313.

328. Banks, H. T., Inman, D. J., Leo, D. J., and Wang, Y., 1996. “An Experimentally Validated Damage

Detection Theory in Smart Structures,” Journal of Sound and Vibration, Vol. 191, No. 5, pp. 859-880.

329. Inman, D. J., and Kress, A., 1995. “Eigenstructure Assignment via Inverse Eigenvalue Methods,” AIAA Journal of Guidance, Control and Dynamics, Vol. 18, No. 3, May-June, pp. 625-627.

330. Slater, J. C. and Inman, D. J., 1995. “A Nonlinear Modal Control Method,” AIAA Journal of Guidance,

Control and Dynamics, Vol. 18, No. 3, May-June, pp. 433-440.

331. Dosch, J., Leo, D. J. and Inman, D. J., 1995. “Modeling and Control for Vibration Suppression of a Flexible Active Structure,” AIAA Journal of Guidance, Control and Dynamics, Vol. 18, No. 2, March-April, pp. 340-346.

332. Lam, M. J., and Inman, D. J., 1995. “Methods of Preserving Symmetry in Model Updating,” ASME

Journal of Vibration and Acoustics, Vol. 117, No. 3(A), July, pp. 349-354.

333. Schulz, M. J. and Inman, D. J., 1995. “Vibration Suppression by Eigenstructure Optimization,” Journal of Sound and Vibration, Vol. 182, No. 2, pp. 259-282.

334. Starek, L. and Inman, D. J., 1995. “A Symmetric Inverse Vibration Problem with Overdamped Modes,”

Journal of Sound and Vibration, Vol. 181, No. 5, April, pp. 893-903.

335. Banks, H. T., Wang, Y., Inman, D. J., and Slater, J. C., 1994. “Approximation and Parameter Identification for Damped Second Order Systems with Unbounded Input Operation,” Control: Theory and Advanced Technology, Vol. 10, No. 4, Part I, December, pp. 873-892.

336. Crassidis, J. L., Leo, D. J., Mook, D. J., and Inman, D. J., 1994. “Robust Identification and Vibration

Suppression of a Flexible Structure,” AIAA Journal of Guidance, Control and Dynamics, Vol. 17, No. 5, September-October, pp. 921-928.

337. Leo, D. J. and Inman, D. J., 1994. “Pointing Control and Vibration Suppression of a Slewing Flexible

Frame,” AIAA Journal of Guidance and Control, Vol. 17, No. 3, May-June, pp. 529-536.

338. Schulz, M. J. and Inman, D. J., 1994. “Model Updating Using Constrained Eigenstructure Assignment,” Journal of Sound and Vibration, Vol. 178, No. 1, pp. 113-130.

339. Schulz, M. J. and Inman, D. J., 1994. “Eigenstructure Assignment and Controller Optimization for

Mechanical Systems,” IEEE Transactions on Control Systems Technology, Vol. 2, June, pp. 88-100.

340. Banks, H. T., Wang, Y., and Inman, D. J., 1994. “Bending and Shear Damping in Beams: Frequency Domain Estimation Techniques,” Journal of Vibration and Acoustics, Vol. 116, No. 2, pp. 188-197.

341. Yae, K. H. and Inman, D. J., 1993. “Control Oriented Order Reduction of Finite Element Models,” ASME

Journal of Dynamic Systems, Measurement and Control, Vol. 115, No. 4, December pp. 708-711.

Daniel J. Inman ()

342. Leo, D. J. and Inman, D. J., 1993. “Modeling and Control Simulations of a Slewing Frame Containing Active Members,” Smart Materials and Structures, Vol. 2, pp. 82-95.

343. Slater, J. C. and Inman, D. J., 1993. “Transfer Function Modeling of Damping Mechanisms in Distributed

Parameter Models,” Mechanics Research Communications, Vol. 20, No. 4, pp. 287-292.

344. Garcia, E., Dosch, J. and Inman, D. J., 1992. “The Application of Smart Structures to the Vibration Suppression Problem,” Journal of Intelligent Material Systems and Structures, Vol. 3, No. 4, October, pp. 659-667.

345. Starek, L., Inman, D. J., and Kress, A., 1992. “A Symmetrical Inverse Vibration Problem,” ASME Journal

of Vibration and Acoustics, Vol. 114, No. 4, pp. 564-568.

346. Banks, H. T. and Inman, D. J., 1992. “On the Significance of Modeling Internal Damping in the Control of Structures,” AIAA Journal of Guidance, Control and Dynamics, Vol. 15, No. 6, Nov.-Dec., pp. 1509-1512.

347. Yae, H. and Inman, D. J., 1992. “Model Reduction in a Subset of the Original States,” Journal of Sound

and Vibration, Vol. 155, No. 1, March, pp. 165-176.

348. Dosch, J. J., Inman, D. J. and Garcia, E., 1992. “A Self Sensing Piezoelectric Actuator for Collocated Control,” Journal of Intelligent Material Systems and Structures, Vol. 3, No. 1, pp. 166-185.

349. Starek, L. and Inman, D. J., 1991. “On Inverse Vibration Problems with Rigid Body Modes,” ASME

Journal of Applied Mechanics, Vol. 50, December, pp. 1101-1104.

350. Ross, A. D. S. and Inman, D. J., 1991. “Design Criteria for Predicting Damping in Underdamped Linear Lumped Parameter Systems,” AIAA Journal of Guidance, Control and Dynamics, Vol. 14, No. 5, September/October, pp. 1033-1039.

351. Banks, H. T. and Inman, D. J., 1991. “On Damping Mechanisms in Beams,” ASME Journal of Applied

Mechanics, Vol. 58, No. 3, September, pp. 716-723.

352. Minas, C. and Inman, D. J., 1991. “A Note on Pole Placement of Mechanical Systems,” ASME Journal of Vibration and Acoustics, Vol. 113, No. 3, July, pp. 420-421.

353. Zimmerman, D. C., Inman, D. J. and Juang, J. N, 1991. “Vibration Suppression Using a Constrained Rate-

Feedback Threshold Control Strategy,” ASME Journal of Vibration and Acoustics, Vol. 113, No. 3, July, pp. 345-353.

354. Garcia, E. and Inman, D. J., 1991. “On the Modeling of the Slewing Control of a Flexible Structure,” AIAA

Journal of Guidance, Control and Dynamics, Vol. 114, No. 4, July- August, pp. 736-742.

355. Minas, C. and Inman, D. J., 1991. “Identification of Non-Proportional Damping Matrix from Incomplete Modal Information,” ASME Journal of Vibration and Acoustics, Vol. 113, No. 2, April, pp. 219-224.

356. Garcia, E. and Inman, D. J., 1990. “Advantages of Slewing an Active Structure,” Journal of Intelligent

Material Systems and Structures, Vol. 1, No. 3, July, pp. 261-272.

357. Ross, A. D. S. and Inman, D. J., 1990. “Setting Time of Underdamped Linear Lumped Parameter Systems,” Journal of Sound and Vibration, Vol. 140, No. 1, pp. 117-127.

358. Bellos, J. and Inman, D. J., 1990. “Frequency Response of Non Proportionally Damped Lumped

Parameter, Linear Dynamic System,” ASME Journal of Vibrations and Acoustics, Vol. 112, No. 2, April, pp. 194-201.

Daniel J. Inman ()

359. Liang, Z. and Inman, D. J., 1990. “Matrix Decomposition Methods in Experimental Modal Analysis,” ASME Journal of Vibration and Acoustics, Vol. 112, No. 3, July, pp. 410-413.

360. Minas, C. and Inman, D. J., 1990. “Matching Finite Element Models to Modal Data,” ASME Journal of

Vibration and Acoustics, Vol. 112, No. 1, January, pp. 84-92.

361. Zimmerman, D. C., and Inman, D. J., 1990. “On the Nature of Interactions Between Structures and Actuators,” AIAA Journal of Guidance, Control and Dynamics, Vol. 13, No. 1, January-February, pp. 82-88.

362. DeCaro, S. M. and Inman, D. J., 1990. “Stable Eigenvalue Placement by Constrained Optimization,”

Dynamics and Stability of Systems, Vol. 15, No. 4, pp.191-199.

363. Cudney, H. H. and Inman, D. J., 1989. “Determining Damping Mechanisms in a Composite Beam,” International Journal of Analytical and Experimental Modal Analysis, Vol. 4, No. 4, October, pp. 138-143.

364. Bellos, J. and Inman, D. J., 1989. “A Survey of Non-Proportional Damping,” The Shock and Vibration

Digest, Vol. 21, No. 10, pp. 7-12.

365. Oshman, Y., Inman, D. J. and Laub, A. J., 1989. “Square Root State Estimation for Second-Order Large Space Structure Models,” AIAA Journal of Guidance, Control and Dynamics, Vol. 12, No. 5, September/October, pp. 698-708.

366. Bellos, J. and Inman, D. J., 1989. “The Nature of Coupling in Nonconservative Lumped Parameter

Systems,” AIAA Journal of Guidance, Control and Dynamics, Vol. 12, No. 5, September/October, pp. 751-753.

367. Inman, D. J., 1989. “On the Vibration Analysis of Viscoelastic Beams by Separation of Variables and

Modal Analysis,” Mechanics Research Communications, Vol. 16, No. 3-4, pp. 213-218.

368. Ross, A.D.S. and Inman, D. J., 1989. “A Design Criterion for Avoiding Resonance in Lumped Mass Normal Mode Systems,” ASME Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol. 111, No. 1, pp. 48-52.

369. Cudney, H. H. and Inman, D. J., 1989. “Control Formulation for Flexible Structures Using Physical

Coordinates,” Mechanics of Structures and Machines, Vol. 17, No. 1, pp. 111-130.

370. Inman, D. J., 1988. “A Sufficient Condition for the Stability of Conservative Gyroscopic Systems,” ASME Journal of Applied Mechanics, Vol. 55, No. 4, December, pp. 895-899.

371. Wan, K. T., Cozzarelli, F. A., and Inman, D. J., 1988. “Thermal Runaway Due to Strain-Heating

Feedback,” AIAA Journal, Vol. 26, No. 10, pp. 1263-1268.

372. Zimmerman, D. C., Horner, G. C. and Inman, D. J., 1988. “Microprocessor Controlled Force Actuator,” AIAA Journal of Guidance Control and Dynamics, Vol. 11, No. 3, May-June, pp. 230-236.

373. Inman, D. J. and Olsen, C. L., 1988. “Dynamics of Symmetrizable Nonconservative Systems,” ASME

Journal of Applied Mechanics, Vol. 55, No. 1, March, pp. 206-212.

374. Yae, K. and Inman, D. J., 1987. “Response Bounds for Linear Underdamped Systems,” ASME Journal of Applied Mechanics, Vol. 54, No. 2, pp. 419-423.

375. Inman, D. J. and Jiang, B. L., 1987. “On Damping Ratios for Multiple Degree of Freedom Linear

Systems,” International Journal of Analytical and Experimental Modal Analysis, Vol. 2, No.1, January, pp. 38-42.

Daniel J. Inman ()

376. Ahmadian, M. and Inman, D. J., 1986. “Some Stability Results for General Linear Lumped-Parameter Dynamic Systems,” ASME Journal of Applied Mechanics, Vol. 53, No. 1, pp. 10-15.

377. Ahmadian, M. and Inman, D. J., 1985. “On the Stability of General Dynamic Systems Using a Liapunov's

Direct Method Approach,” Journal of Computers and Structures, Vol. 20, No. 1-3, pp. 287-292.

378. Inman, D. J. and Saggio, III, F., 1985. “Stability Analysis of Gyroscopic Systems by Matrix Methods,” AIAA Journal of Guidance Control and Dynamics, Vol. 8, No. 1, January-February, pp. 150-152, (also Proceedings of the AIAA Guidance and Control Conference, August, 1983, pp. 771-774.)

379. Inman, D. J., 1984. “Modal Decoupling Conditions for Distributed Control of Flexible Structures,” AIAA

Journal of Guidance Control and Dynamics, Vol. 7, No. 6, November-December, pp. 750-752.

380. Ahmadian, M. and Inman, D. J., 1984. “Classical Normal Modes in Asymmetric Non-Conservative Dynamic Systems,” AIAA Journal, Vol. 22, No. 7, July, pp.1012-1015.

381. Ahmadian, M. and Inman, D. J., 1984. “On the Nature of Eigenvalues of General Non-Conservative

Systems,” ASME Journal of Applied Mechanics, Vol. 51, No. 1, March, pp. 193-194.

382. Nicholson, D. W. and Inman, D. J., 1983. “Stable Response of Damped Linear Systems,” The Shock and Vibration Digest, Vol. 15, No. 11, pp. 19-25.

383. Inman, D. J. and Orabi, I., 1983. “An Efficient Method for Computing the Critical Damping Condition,”

ASME Journal of Applied Mechanics, Vol. 50, No. 3, pp. 679-682.

384. Inman, D. J., 1983. “Dynamics of Asymmetric Non-Conservative Systems,” ASME Journal of Applied Mechanics, Vol. 50, No. 1, pp. 199-203.

385. Inman, D. J. and Andry, Jr., A. N., 1982. “The Nature of the Temporal Solutions of Damped Linear

Distributed Systems with Normal Modes,” ASME Journal of Applied Mechanics, Vol. 49, No. 4, pp. 867-870.

386. Inman, D. J. and Andry, A. N. Jr., 1982. “A Procedure for Designing Overdamped Lumped Parameter

Systems,” May 1982, Shock and Vibration Bulletin, No. 52, Part 5, pp. 49-53.

387. Inman, D. J., 1982. “Oscillatory Damped Distributed Parameter Systems,” Mechanics Research Communication, Vol. 9, No. 2, pp. 101-107.

388. Inman, D. J. and Andry, Jr., A. N., 1980. “Some Results on the Nature of Eigenvalues of Discrete

Damped Linear Systems,” ASME Journal of Applied Mechanics, Vol. 47, No. 4, pp. 927-930. Publications (Proceedings and Conference Papers):

1. Srivatsa, S, M., and Inman, D. J., 2020, “Characterization of Fatigue in Integrated Tuned Mass-Dampers”, IMAC XXXVIII, Hourston, TX February 9-14, 2020.

2. Harvey, C., Baliga, V., and Inman, D.J., 2020, “Control force required to morph the elbow and wrist in gulls”, 2020 AIAA SciTech, Orlando, FL paper number AIAA-2020-1037. https://doi.org/10.2514/6.2020-1037

3. Acosta, K., Wilkie, W.K. and Inman, D. J., 2020 “Pyroelectric Coefficient Enhancement of Macro-fiber Composites using Electric Fields”, 2020 AIAA SciTech, Orlando, FL paper number AIAA-2020-0151. https://doi.org/10.2514/6.2020-0151

4. Sigrest, P. and Inman, D.J., 2020, “Effect of Spanwise Trailing Edge Morphing Tabs on Aerodynamic

Daniel J. Inman ()

Performance”, 2020 AIAA SciTech, Orlando, FL paper number AIAA-2020-2007, https://doi.org/10.2514/6.2020-2007

5. Gamble, L. L, and Inman, D. J., 2020, “Aeroelastic Design and Analysis of a Bioinspired Flexible Airfoil”, 2020 AIAA SciTech, Orlando, FL paper number AIAA 2020-1540, https://doi.org/10.2514/6.2020-1540.

6. Harvey, C. and Inman, D. J., 2019, “A finite element analysis of a gull wing through varied morphed configurations”, ICAST2019: 30th International Conference on Adaptive Structures and Technologies, October 7-11, 2019, Montreal, QC, Canada.

7. Lee, A. J. and Inman, D. J., 2019, “Extension of Cross-Well Bandwidths for a Bistable Oscillator”, Proceedings SPIE Smart Structures and NDE, Denver, CO, March 3-7, 2019.

8. Rosatelli, P., Lacarabonara, W. and Inman, D. J., 2019, “Dynamic Response of a Morphing Wing, 1st

International Nonlinear Dynamics Conference (NODYCON) 17-20 FEB 2019, Rome, Italy.

9. Avci, O., Abdeljabee, O., Kiranyaz, S. and Inman, D. J., 2019, “Structural Health Monitoring with Self-Organizing Maps and Artificial Neural Networks”, IMAC XXXVI, Conference and Exposition on Structural Dynamics, Orlando, Florida, Paper No. 4489.

10. Avci, O., Abdeljabee, O., Kiranyaz, S. and Inman, D. J., 2019, “Control of Plate Vibrations with Artificial

Neural Networks and Piezoelectricity”, IMAC XXXVI, Conference and Exposition on Structural Dynamics, Orlando, Florida, Paper No. 4497.

11. Avci, O., Abdeljabee, O., Kiranyaz, S. and Inman, D. J., 2019, “Convolutional Neural Networks for Real-

time and Wireless Damage Detection”, IMAC XXXVI, Conference and Exposition on Structural Dynamics, Orlando, Florida, Paper No. 4499.

12. Essink, B. C. and Inman, D. J., 2019, “Three-Dimensional Mechanical Metamaterial for Vibration

Suppression”, IMAC XXXVI, Conference and Exposition on Structural Dynamics, Orlando, Florida, Paper No. 4399.

13. Harvey, C., Baliga, V. B., Altshuler, D. L. and Inman D. J., 2019, “Pitch Control Effectiveness of the

Avian Elbow and Wrist via a Numerical Lifting Line Analysis” proceedings 2019 AIAA SciTech.

14. Huang, W., Zhang, H., Inman, D. J., Qiu, J., Cesnik, E. S. C., & Ji, H. (2018, August). Numerical Analysis of Wave Propagation in Functionally Graded 1-D Acoustic Black Hole via Viscoelastic Local Interaction Simulation Approach. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise18, Chicago USA. Institute of Noise Control Engineering, No. 1912.

15. Haughn, K., Gamble, L.L. and Inman, D. J., 2018, “Horizontal Planform Morphing Tail for an Avian Inspired UAV Using Shape Memory Alloys”, Proceedings, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2018-7986

16. Lee, A.J.,, Xie, A. and Inman, D. J., 2018, “Suppression of Cross-well Oscillations with Active Control of a Bistable Laminate”, Proceedings, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2018-7919

17. Gamble, L. L. Harvey, C. and Inman, D. J., “Analysis of a Bioinspired Flexible Trailing Edge Concept”, Proceedings of the 29Th International Conference on Adaptive Structures and Technologies, Seoul Korea, September 30- October 4, 2018.

18. Chae, E. J. and Inman, D. J., “Aerodynamic Characterization of Morphing Wings in Flapping Motion”, Proceedings of the 29Th International Conference on Adaptive Structures and Technologies, Seoul Korea, September 30- October 4, 2018.

Daniel J. Inman ()

19. Lee, A. J. and Inman, D. J.,2018, “Electromechanical Response of a Bistable Laminate with Macro Fiber Composites from Nonlinear Vibrations”, Proceedings of the 29Th International Conference on Adaptive Structures and Technologies, Seoul Korea, September 30- October 4, 2018.

20. Groo, L. A., Inman, D. J. and Sodano, H. A., 2018, “Damage Localization in Fiber-Reinforced Composites Using and Integrated Zinc Oxide Nanowire Interphase”, Proceedings of the 29Th International Conference on Adaptive Structures and Technologies, Seoul Korea, September 30- October 4, 2018.

21. Acosta, K. L., Wilkie, W. K., and Inman, D. J., 2018, “Analysis of Impedance on Macro- Fiber Composites Undergoing Thermal Cycles”, Proceedings of the 29Th International Conference on Adaptive Structures and Technologies, Seoul Korea, September 30- October 4, 2018.

22. Reichl, K. K., and Inman, D. J., 2018, “Lumped Mass Model of a 1D Metastructure with Vibration Absorbers with Varying Mass”, IMAC-XXXVI, Conference and Exposition on Structural Dynamics, Society of Experimental Mechanics, San Antonia, TX.

23. Lee, A. J. and Inman, D. J. 2018, “Broadband Energy Harvesting Performance of a Piezoelectrically Generated Bistable Laminate”, IMAC-XXXVI, Conference and Exposition on Structural Dynamics, Society of Experimental Mechanics, San Antonia, TX.

24. Lee, A., Moosavian, A. and Inman D. J., 2017, “Piezoelectrically Strained Bistable Laminates with Macro

Fiber Composites”, Proceedings SPIE Smart Structures and NDE, Portland, Oregon, 25-29 March 2017, paper number 10164-12

25. Inman, D. J., Reichl, K. K. and Essink, B. C., “A Metastructure Approach to Damping and Vibration Absorption,” APVC2017: the 17th Asian Pacific Vibration Conference , Keynote Address, November 13-15, 2017, Nanjing, P. R. China, Paper number 001.

26. Groo, L., Sodano, H. A. and Inman, D. J., 2017, “Passive Damage Detection Using Multifunctional Composites With ZnO Nanowires”, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, Utah, paper number SMASIS2017-3800.

27. Emam, S., Hobeck, J.D. and Inman, D. J., 2017, “Experimental Study of Nonlinear Vibration Energy Harvesting of a Bistable Composite Laminate”,Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, Utah, paper number SMASIS2017-3717.

28. Chae, E. J., Moosavian, A., Pankonien, A. M. and Inman, D. J., “A Comparative Study of a Morphing Wing”, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, Utah, paper number SMASIS2017-3833.

29. Garcia, D., Trendafilova, I. and Inman, D.J., 2017, “Delamination Detection and Growth Assessment in Composite Laminated Beams Through Data-Driven Vibration Structural Health Monitoring”, Proceedings of 14th International Conference on Engineering Structural Integrity Assessment (ESIA14) 15 to 19 May 2017, EMAS Publishing, Warrington, UK, 10 pages.

30. Moosavian, A. , Malakooti, M. H., Sodano, H. A. and Inman, D. J., 2017, “Design and Manufacturing of a Morphing Trailing Edge Using 3-D Printed Piezoelectric Polymer” , VIII ECCOMAS Thematic Conference on Smart Structures and Materials, Madrid, Spain, June 2- 4, 2017, 9 pages.

31. Groo, L., Sodano, H. A. and Inman, D. J., 2017, “Piezoelectric Zinc Oxide Nanowires for Use in Acoustic Emission Testing”, American Society for Composites 32nd Annual Technical Conference, Paper No. 187.

32. Sales, T. P., Rade, D. A. and Inman, D.J., 2017, “Combining Shape Memory Alloy Wire Actuators with Permanent Magnets for a Multi-Stable Smart Structure”, Proceedings COBEM 2017, Curitiba Brazil,

Daniel J. Inman ()

December 3- 8, 2017.

33. Liu, M. L., Reichl, K. K., and Inman, D. J. (2017). Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction. Proceedings of the Society of Engineering Mechanics Annual Conference. Indianapolis, IN, June 2017.

34. Oliveira, M. A., Araujo, N. V. S., Inman, D. J., and Filho, J. V., 2017, “A New Strategy for Damage Identification in SHM Systems by Exploring Kappa Coefficient”, Proceedings 11th International Workshop on Structural Health Monitoring, September 12-14, 2017, Stanford University, CA.

35. Acosta, K. L., Hobeck, J. D., Owen, R. B. and Inman, D. J., 2017, “Macro-Fiber Composites Under Thermal Cycles for Space Applications, Proceedings SPIE Smart Structures and NDE, Portland, Oregon, 25-29 March 2017, paper number [10168-118]

36. Reichl, K. and Inman, D. J., 2017, “Longitudinal Metastructure Bar with an Active Vibration Absorber”, Proceedings SPIE Smart Structures and NDE, Portland, Oregon, 25-29 March 2017, paper number [10164-34]

37. Park, G. and Inman, D. J., 2017, “Impedance-Based Structural Health Monitoring”, Proceedings SPIE Smart Structures and NDE, Portland, Oregon, 25-29 March 2017, paper number [10172-7]

38. Hobeck, J. D. and Inman, D. J., 2017 “Simultaneous Passive Broadband Vibration Suppression and Energy Harvesting with Metastructures”, Proceedings SPIE Smart Structures and NDE, Portland, Oregon, 25-29 March 2017, paper number [10172-18]

39. Mossavian, M, Pankonien, A. M., Chae, E. J. and Inman, D. J., 2017, “A Parametric Study on a Bioinspired Continuously Morphing Trailing Edge”, Proceedings SPIE Smart Structures and NDE, Portland, Oregon, 25-29 March 2017, paper number [10162-2]

40. Reichl, K.K. and Inman, D.J., 2017, “Constant Mass Metastructure with Vibration Absorbers with Linearly Varying Natural Frequencies”, IMAC XXXV, Conference and Exposition on Structural Dynamics, January 30-February 2, 2017, Garden Grove, CA, USA.

41. Essink, B.C., Owen, R.B., and Inman, D.J., 2017, “Optimization Of A Zigzag Shaped Energy Harvester For Wireless Sensing Applications”, IMAC XXXV, Conference and Exposition on Structural Dynamics, January 30-February 2, 2017, Garden Grove, CA, USA

42. Avci, O., Abdeljaber, O., Kiranyaz. S., and Inman, D.J., 2017, “Structural Damage Detection in Real-Time: Implementation of 1D Convolutional Neural Networks for SHM Applications” IMAC XXXV, Conference and Exposition on Structural Dynamics, January 30-February 2, 2017, Garden Grove, CA, USA

43. Avci, O., Abdeljaber, O., Kiranyaz. S., and Inman, D.J., 2017, “Global Structural Damage Assessment on a SHM Benchmark Problem Using One Dimensional Convolutional Neural Networks”, IMAC XXXV, Conference and Exposition on Structural Dynamics, January 30-February 2, 2017, Garden Grove, CA, USA

44. Avci, O., Abdeljaber, O., Kiranyaz. S., and Inman, D.J., 2017, “Vibration Suppression in Metastructures Using Zigzag Inserts Optimized by Genetic Algorithms”, IMAC XXXV, Conference and Exposition on Structural Dynamics, January 30-February 2, 2017, Garden Grove, CA, USA Paper No. 1248.

45. Rabelo, D. S., Hobeck, J. D., Inman, D. J., Neto, R. M. F., Steffan, V. Jr., 2017, “Monitoring of Fatigue Crack Growth Using a Low-Cost Data Acquisition Device For Impedance-Based SHM Considering Dynamic Measurements”, Proceedings of the XVII International Symposium on Dynamic Problems of Mechanics - DINAME 2017, A. T. Fleury, D. A. Rade, P. R. G. Kurka (Editors), March 5th to 10th, 2017, São Sebastião, SP, Brazil.

Daniel J. Inman ()

46. Essink, B. C., Owen, R. B. and Inman, D. J., 2016, “Wireless Broadband Magnetoelastic Energy Harvesting Module”, ICAST 2016: 27th International Conference on Adaptive Structures and Technologies, October 3-5, 2016, Lake George, New York, USA.

47. Essink, B. and Inman, D., 2016, “A Comparison of Damping and Vibration Absorption in Metastructures,” 2016 Proceedings International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium October 17-20, 2016.

48. Gamble, L. L., and Inman, D, J., 2016, “Aerodynamic Performance of a Bioinspired Morphing Tailless Aircraft Concept”, ICAST 2016: 27th International Conference on Adaptive Structures and Technologies, October 3-5, 2016, Lake George, New York, USA.

49. Reichl, K. K., and Inman, D. J., 2016. “Active Vibration Control of Metastructures”, ICAST 2016: 27th International Conference on Adaptive Structures and Technologies, October 3-5, 2016, Lake George, New York, USA.

50. Lee, A., Moosavian, A. and Inman, D.J., 2016, “An Investigation Into Piezoelectrically Induced Bistability”, ICAST 2016: 27th International Conference on Adaptive Structures and Technologies, October 3-5, 2016, Lake George, New York, USA.

51. Moosavian, A., Zhu, C., Xi, F, and Inman, D. J., 2016, “A Single Input-Multiple Output Curve Adaptive Linkage Array”, Proceedings of the ASME 2016 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC2016), August 21-24, 2016, Charlotte, North Carolina, USA, IDETC2016-59893.

52. Moosavian, A., Gamble, L. L., Pankonien, A. M., and Inman, D. J., 2016, “Bio-Inspired Coupling of Camber and Sweep in Morphing Wings,” Proceedings of the ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2016, September 28-30, 2016, Stowe, Vermont, USA, SMASIS2016-9096.

53. Gamble, L. L. and Inman, D. J., 2016, “Yaw control of a Smart Morphing Tailless Aircraft Concept” Proceedings of CIMTEC 2016, June 5-9, 2016, Perugia, Italy

54. Hobeck, J. D. and Inman, D. J., 2016, “Metastructures for Passive Broadband Vibration Suppression and

Energy Harvesting” Proceedings of CIMTEC 2016, June 5-9, 2016, Perugia, Italy

55. Santos, A., Hobeck, J. D. and Inman D. J., 2016, "Analytical Modeling of Orthogonal Spiral Structures", Smart Materials and Structures, SMS-103444.R1

56. Gamble,L.L., Moosavian,A. and Inman, D.J. ,2017, “Effects of Speed on Coupled Sweep and Camber in

Morphing Wings”, 55th AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, (AIAA 2017-0267) http://dx.doi.org/10.2514/6.2017-0267

57. Abdeljaber, O., Avci, O. and Inman, D. J., 2016, “Genetic Algorithm Use for Internally Resonating Lattice Optimization: Case for a Beam-like Metastructure”, IMAC-XXXIV, Society of Experimental Mechanics, Orlando, Florida, January 25-28, 2016, Paper No. 124.

58. Pankonein, A. M., Gamble, L. L., Faria, C. and Inman, D. J., 2016, “Synergistic Smart Morphing AIleron:

Capabilites Identification”, Proceedings AIAA SciTech 2016, Jan 4-8, San Diego, CA, Paper No. AIAA-2016-1570.

Daniel J. Inman ()

59. Reichl, K. K. and Inman, D. J., 2016, “Finite Element Modelling of Longitudinal Metastructures for Passive Vibration Suppression”, Proceedings AIAA SciTech 2016, Jan 4-8, San Diego, CA, Paper No. AIAA-2016-1477.

60. Reichl, K. K., and Inman, D. J., 2016, “Dynamic Modulus Properties of Objet Connex 3D Printer Digital Materials”, IMAC-XXXIV, Society of Experimental Mechanics, Orlando, Florida, January 25-28, 2016, Paper No.149.

61. Essink, B.C., and Inman, D. J., 2016, “Optimized 3D Printed Chiral Lattice for Broadband Vibration Suppression”, IMAC-XXXIV, Society of Experimental Mechanics, Orlando, Florida, January 25-28, 2016, Paper No.204.

62. Tavakkoli, M., Weaver P. M., Bowen, C. R., Inman, D. J., and Kim, H. A., 2015, “An Analytical Study on

Piezoelectric-Bistable Laminates with Arbitrary Shapes for Energy Harvesting” Proceedings 7th ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2015, A.L. Araújo, C.A. Mota Soares, et al. (Editors), Azores, Portugal, 2-6 June, 2015.

63. Zhou, S., Inman, D. J. and Cao, J., 2015, “A Linear-Element Coupled Nonlinear Energy Harvesting System”, Proceedings of the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2015, September 21-23, 2015, Colorado Springs, Colorado, USA, Paper number SMASIS2015-8897.

64. Hobeck, J. D., and Inman, D. J., 2015, “Energy Harvesting from Dual Cantilever Flutter “ ISVCS10, 10th International Symposium on Vibrations of Continuous Systems Stanley Hotel, Estes Park, Colorado, USA, July 26 –31, 2015

65. Hobeck, J. D., Laurent, C.M.V., and Inman, D. J., 2015, “3D Printing of Metastructures for Passive

Broadband Vibration Suppression”, 20th International Conference on Composite Materials Copenhagen, 19-24th July 2015, Paper Number 3321-2.

66. Reichl, K. K. and Inman, D. J., “Modeling Of Low-Frequency Broadband Vibration Mitigation For A Bar

Experiencing Longitudinal Vibrations Using Distributed Vibration Absorbers”, 20th International Conference on Composite Materials Copenhagen, 19-24th July 2015, Paper Number 3321-1.

67. De Oliveira, M. A., and Inman, D. J., 2015 “PCA-based Method for Damage Detection Exploring

Electromechanical Impedance in a Composite Beam”, Proceedings 10th International Workshop on Structural Health Monitoring, 1-3 September 2015, Stanford, Palo Alto, CA. paper no. 0740.

68. De Oliveira, M. A., Filho, J. V., Lopes, Jr., V. and Inman, D. J., 2015 “Structural Damage Identification in

an Aeronautical Panel Exploring the PCA and Delaunay Triangulation”, Proceedings 10th International Workshop on Structural Health Monitoring, 1-3 September 2015, Stanford, Palo Alto, CA. paper no. 0687.

69. Gamble, L. L., Pankonein, A. M. and Inman, D. J., “Stall Recovery of the Span-wise Morphing Trailing

Edge Concept via an Optimized Nonlinear Model”, ICAST2015: 26th International Conference on Adaptive Structures and Technologies October 14-16th, 2015, Kobe, Japan

70. Hobeck, J. D. and Inman, D. J., 2015, “Magnetoelastic Metastructures for Passive Broadband Vibration

Suppression”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 8-12, 2015, on CD, paper number 9431-43.

71. Essink, B. C., Hobeck, J. D., Owen, R. B. and Inman D. J., 2015, “Magnetoelastic Energy Harvester For

Structural Health Monitoring Applications” Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 8-12, 2015, on CD, paper number 9431-73.

Daniel J. Inman ()

72. Pankonien, A. M. and Inman, D. J., 2015, “Spanwise Morphing Trailing Edge on a Finite Wing” Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 8-12, 2015, on CD, paper number 9431-27.

73. Spak, K., Agnes, G. and Inman, D. J., 2015, “Experimental and Theoretical Analysis of Cabled Beams” Proceedings AIAA SciTech 2015, Jan 5-9, 2015, Orlando, FL, AIAA-2015-0690.

74. Pankonien, A. M. and Inman, D. J., 2014, “Aerodynamic Performance of a Spanwise Morphing Trailing Edge Concept”, Proceedings of ICAST2014: 25nd International Conference on Adaptive Structures and Technologies October 6-8th, 2014, The Hague, The Netherlands.

75. Arrieta, A. F., Ermanni, P., Inman, D. J. and Karami, M. A., 2014, “Elastically Bi-Stable Heartbeat Powered Energy Harvester”, Proceedings ASME Smart Materials, Adaptive Structures & Intelligent Systems (SMASIS) conference, September 8-10, 2014, Newport, Rhode Island, paper number SMASIS 2014- 7530.

76. Gonzalez-Buelga, A., Neild, S. A., Inman, D.J., 2014, “Combining Vibration Control And Energy Harvesting”,www.fe.up.pt/eurodyn2014

77. Hobeck, J. D., Geslain, D. and Inman D. J., “The Dual Cantilever Flutter Phenomenon: a Novel Energy Harvesting Method”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 9-13, 2014, on CD, paper number 9061-169.

78. Pokenien, A. M., and Inman, D. J., “Aeroelastic Performance Evaluation of a Flexure Box Morphing Airfoil Concept”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 9-13, 2014, on CD, paper number 9057-41.

79. Betts, D.N., Bowen, C. R., Inman, D.J., Kim, A. H., “Novel Model for Arbitrary Shape Bistable

Piezoelectric-Composite Plates for Vibration Based Energy Harvesting”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 9-13, 2014, on CD, paper number 9057-49.

80. Faria, C. T. , Inman, D. J. and Owen, R.B., “Macro Fiber Composites Performance under Thermal Cycling

for SHM Applications”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA, March 9-13, 2014, on CD, paper number 9057-77.

81. Murugan, S., Fincham, J. H., Friswell, M. I. and Inman, D. J., "Aeroelastic Modeling of Morphing Aircraft Wings," in 4th Aircraft Structural Design Conference, Belfast (UK), 2014

82. Spak, K. S., Agnes, G. S and Inman, D. J., 2014, “Cable Parameters for Homogenous Cable-Beam Models

for Space Structures”, Proceedings IMAC-XXXII, Society of Experimental Mechanics, Orlando, Florida, February 2-6, 2014, Paper No.17.

83. Cammarano, A., Gonzales-Buelga, A., Neild, S. A., and Inman, D. J., 2014, “Strategies for Coupled

Vibration Suppression and Energy Harvesting”, Proceedings IMAC-XXXII, Society of Experimental Mechanics, Orlando, Florida, February 2-6, 2014, Paper No.189.

84. Choi, J. D., and Inman, D. J., 2014, “Investigation on Damping of a Host Structure Induced by Attached

Cables,” Proceedings IMAC-XXXII, Society of Experimental Mechanics, Orlando, Florida, February 2-6, 2014, Paper No.42.

85. Cammarano, A., Gonzales-Buelga, A., Neild, S. A., Inman, D. J., & Burrows, S. G.,2014, “Stratigies for Coupled Vibration Suppression and Energy Harvesting,” Mechanics of Biological Systems and Materials - Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4, p. 27-33.

Daniel J. Inman ()

86. Spak, K. S., Agnes, G. S. and Inman, D. J., 2014, “Inclusion of Shear Effects, Tension and Damping in a DTF Beam Model for Cable Modeling”, Proceedings AIAA SciTech 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, Washington, DC, January 12-17, 2014, paper number AIAA-2014-0491.

87. Betts, D. N., Guyer, R. A., La Bas, P.K., Bowen, C. R., Inman, D. J. and Kim, H. A., 2014, “Modelling the Dynamic Response of Bistable Composite Plates for Piezoelectric Energy Harvesting” Proceedings AIAA SciTech 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, Washington, DC, January 12-17, 2014, paper number AIAA 2014-0154.

88. Pankonien, A. M., Duraisamy, K., Faria, C. T. and Inman, D. J., 2014, “Synergistic Smart Morphing Aileron: Aero-structural Performance Analysis”, Proceedings AIAA SciTech 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, Washington, DC, January 12-17, 2014, paper number AIAA-2014-0924.

89. Lee, A. J., Wang, Y. and Inman, D. J., “Energy Harvesting of Piezoelectric Stack Actuator from A Shock Event”, Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Portland, OR, USA, 4-7 August 2013, paper number DETC2013-13210.

90. Wang, Y., and Inman, D.J., “Viscoelastic Behavior of a Composite Beam Using Finite Element Method: Experimental and Numerical Assessment”, Proceedings 19th International Conference on Composite Materials, Montreal, Canada, July 29 – August 2, 2013, pp. 310-328.

91. De Olieviera, M. A., Filho, J. V., Lopes, V. jr., Inman, D.J, 2013, “A Novel Time-Domain Technique for Damage Detection Applied to SHM Using Savitzky-Golay Filter”, Proceedings of the 9th IWSHM-International Workshop on Structural Health Monitoring, 2013, Stanford University. Structural Health Monitoring. Lancaster, Pennsylvania, USA: DEStech Publications, 2013. v. 1. p. 996-1003. ISBN: 978-1-60595-115-7.

92. Wang, Y., and Inman, D. J., “Adaptive Multifunctional Composites” Proceedings SPIE Defense, Security and Sensing Conference, Baltimore, MD, April 2013, 9 pages

93. Ajaj, R., Keane, A., Beaverstock, C., Friswell, M. I. and Inman, D. J., 2013, “Morphing Aircraft: The Need for a New Design Philosphy, Ankara International Aerospace Conference, METU, Ankara, Turkey, Paper no. AIAC-2013-054.

94. Spak, K. S, Agnes, G. S., and Inman, D. J., 2013, “Comparison of Damping Models for Space Flight Cables”, Proceedings IMAC-XXXI, Society of Experimental Mechanics, Garden Grove, CA, February 11-14, 2013, Paper No 77.

95. Choi, J. D. and Inman, D. J., 2013, “Spectral Element Method for Cable Harnessed Structures”,

Proceedings IMAC-XXXI, Society of Experimental Mechanics, Garden Grove, CA, February 11-14, 2013, Paper No. 31.

96. Cammarano, A. Gonzalez-Buelga, A. Neild, S. A., Wagg, D.J. and Inman, D.J., “Optimum Load for

Energy Harvesting with Non-Linear Oscillators”, Proceedings IMAC-XXXI, Society of Experimental Mechanics, Garden Grove, CA, February 11-14, 2013, Paper No. 197.

97. De Oliveira, M. A., Filho, J. V., Lopes, V., Jr., and Inman, D. J., “Damage Detection Based on

Electromechanical Impedance Principle and Principle Components”, Proceedings IMAC-XXXI, Society of Experimental Mechanics, Garden Grove, CA, February 11-14, 2013, Paper No. 246.

98. Karami, M. A., Bradley, D. J. and Inman, D.J., “Nonlinear Experimental Study of the Vibration Energy

Harvester for Cardiac Pacemakers”, SPIE Smart Structures ., Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 10-15, 2013, on CD, paper number 8688-17.

Daniel J. Inman ()

99. Wang, Y. and Inman, D. J., “A Finite Element Modeling of a Multifunctional Hybrid Composite Beam

with Viscoelastic Materials”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 10-15, 2013, on CD, paper number 8689-46.

100. Faria, C., Priya, S. and Inman, D. J., “Modeling and Control of a Jellyfish-Like Bio-Inspired AUV”,

Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 10-15, 2013, on CD, paper number 8688-23.

101. Pankonien, A. and Inman, D. J. "Experimental testing of spanwise morphing trailing edge concept",

Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 10-15, 2013, on CD, paper number 8688-39.

102. Hobeck, J. D. and Inman, D. J., “Electromechanical and Statistical Modeling of Turbulence –

Induced Vibration for Energy Harvesting”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 10-15, 2013, on CD, paper number 8688-101

103. Betts, D.N., Bowen, C. R., Kim, H. A., Gathercole, N, Clarke, C. T. and Inman, D. J., “Investigation of

Bistable Piezocomposite Plates for Broadband Energy Harvesting”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 10-15, 2013, on CD, paper number ???

104. Faria, C. T., Pankonien, A. and Inman, D. J., “Synergistic Smart Morphing Aileron”, Proceedings 54th

AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA USA, paper number AIAA-2013-1512.

105. Choi, J. and Inman, D. J., “Development of Modeling of Cable Harnessed Structures”, Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA USA, Paper No. AIAA-2013-1888.

106. Spak, K. S., Anges, G. S. and Inman, D. J., “Toward Modeling of Cable-Harnessed Structures: Cable

Damping Experiments”, Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA USA, Paper No. AIAA-2013-1889.

107. Wang, Y. and Inman, D. J., “Experimental and Finite Element Analysis for a Multifunctional Beam with

Frequency-Dependent Viscoelastic Behavior”, Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA USA, Paper No. AIAA-2013-1640.

108. Karami, M. A, Bradley, D. J., Inman, D.J., 2012, “Piezoelectric Energy Harvesters Can Perpetually

Recharge Pacemakers”, American Heart Association’s Scientific Sessions 2012, November 4-7, 2012, Los Angeles, California.

109. Wang, Y. and Inman, D. J., “Experimental Validation of Simultaneous Gust Alleviation and Energy

Harvesting for Multifunctional Composite Wing Spars”, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Materials, Stone Mountain, Georgia, September 19-21, 2012, paper number SMASIS2012-8176.

110. Karami, M. A. and Inman, D.J., “Hybrid Rotary-Translational Energy Harvester for Multi-Axis Ambient

Vibrations”, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Materials, Stone Mountain, Georgia, September 19-21, 2012, paper number SMASIS2012-7941

111. Betts, D., Kim, H., Bowen, C., and Inman, D. J., 2012, “Static and Dynamic Analysis of Bistable

Piezoelectric-Composite Plates for Energy Harvesting”, Proceedings AIAA 53rd Structures, Structural Dynamics and Materials Conference, 23-26 April, Honolulu, Hawaii, Paper number AIAA-2012-1492.

112. Wang, Y. and Inman, D. J., “Experimental Validation of a Multifunctional Wing Spar Design with Sensing,

Daniel J. Inman ()

Harvesting and Gust Alleviation Capabilities”, Proceedings AIAA 53rd Structures, Structural Dynamics and Materials Conference, 23-26 April, Honolulu, Hawaii, Paper number AIAA-2012-1560.

113. Bonakdar, M., Seidel, G. and Inman, D. J., “Effect of Nanoscale Fillers on the Viscoelasticity of Polymer Nanocomposites”, Proceedings AIAA 53rd Structures, Structural Dynamics and Materials Conference, 23-26 April, Honolulu, Hawaii, Paper number AIAA-2012-1825.

114. Hobeck, J. and Inman, “Design and Analysis of Dual Pressure Probes for Predicting Turbulence-Induced

Vibration in Low Velocity Flow”, Proceedings AIAA 53rd Structures, Structural Dynamics and Materials Conference, 23-26 April, Honolulu, Hawaii, Paper number AIAA-2012-1881.

115. Betts DN, Kim HA, Bowen CR, and Inman DJ, “Optimization of Piezoelectric Bistable Composite Plates

for Broadband Vibrational Energy Harvesting”, SPIE Smart Structures/NDE Conference, San Diego, CA USA, doi:10.1117/12.930138

116. Dodson, J. C, Wolfson, J., Foley, J. R. and Inman, D. J., “Transmission of Guided Waves Across

Prestressed Interfaces”, Proceedings XXX SEM International Modal Analysis Conference (IMAC XXX), Elsiver, Jacksonville, FL, 29 January to 3 February, 2012, Paper No. 269.

117. Faria, C. T., DeMarqui, Jr. C., Inman, D. J. and Lopes, Jr. V., 2012, “Nonlinear Dynamic Model and

Simulation of a Morphing Wing Profile Actuated by Shape Memory Alloy,” Proceedings XXX SEM International Modal Analysis Conference (IMAC XXX), Elsiver, Jacksonville, FL, 29 January to 3 February, 2012, Paper No. 61, Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 21–28.

118. Hobeck, J.D. and Inman, D. J., “Electromechanical and Statistical Modeling of Turbulence Induced

Vibration for Energy Harvesting, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 11-15, 2012, on CD, paper number [8341-28]

119. Karami, M. A., Farmer, J. R., and Inman, D. J., 2012, “Nonlinear Dynamics of the Bi-stable Piezoelectric

Wind Energy Harvester”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 11-15, 2012, on CD, paper number [8341-11]

120. Afshari, M., and Inman, D. J., 2012, “Temperature Effect on the Accuracy of Vibration-Based Damage

Detection of Thin Plates”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 11-15, 2012, on CD, paper number 8348-45.

121. Godinez, V. F., Farmer, J. R., Ziehl, P., Giurgiutiu, V., Nanni, A and Inman, D. J., 2012, “Status in the

Development of Self-Powered Wireless Sensor Node for Structural Health Monitoring and Prognosis”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 11-15, 2012, on CD, paper number 8347-68.

122. Wang, Y. and Inman, D. J., 2012, “Experimental Validation of Simultaneous Gust Alleviation and Energy

Harvesting for Multifunctional Composite Wing Spars”, Proceedings SPIE’s Smart Structures and NDE Conference, San Diego, CA March 11-15, 2012, on CD, paper number 8341-102.

123. Zeng, K., Yun, J., Ha, D. S. and Inman, D. J., 2011, “Wireless Low-Power Structural Health Monitoring

System for Wind Turbine Blades”, 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM11+), Seoul, Korea, September 18-22, 2011.

124. Joyce, B., Farmer, J. and Inman, D. J., “Inertial Energy Harvester for Monitoring Wind Turbine Blades”,

Proceedings Structural Health Monitoring, Ed. F.K. Chang, September 2011, pp. 1631- 1638.

125. Godinez, V., Pollock, A., Gonzalez, M., Momeni, S., Gostautas, R., Fustos, R. , Newlin, B., Inman, D., Farmer, J., Priya, S., Ziehl, P., Caicedo, J., Zarate, B, Yu, L., Giurgiutiu, V. and Nanni, A., 2011, “Self

Daniel J. Inman ()

Powered Wireless Sensor Network for Structural Bridge Prognosis: Achievement for the First Two Years”, Proceedings Structural Health Monitoring, Ed. F.K. Chang, September 2011, pp. 661- 668.

126. Qu, W.Z., and Inman, D. J., 2011, “Finite Element Simulation of Compensation for Temperature Influence

on Lamb Wave Propagation”, Proceedings Structural Health Monitoring, Ed. F.K. Chang, September 2011, pp. 907-914.

127. Babtista, F. G., Filho, J. V., Oki, N., Turra, A.E., Lopes, Jr, V. and Inman, D.J., 2011, “Versatile and Easy-

to-Assemble Measurement System for Impedance-Based Structural Health Monitoring”, Proceedings Structural Health Monitoring, Ed. F.K. Chang, September 2011, pp. 1612-1619.

128. Wang, Y. and Inman, D. J., 2011, “Gust Alleviation for UAVs Using a Multifunctional Piezoelectric Wing Spar ”, Proceedings of the 22nd International Conference on Adaptive Structures and Technology, Corfu, Greece, October 2011, on CD.

129. Karami, M.A., Farmer, J., Bressers, S., Priya, S., and Inman, D. J., 2011, “Parametrically Excited Nonlinear

Piezoelectric Wind Energy Harvester”, Proceedings ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, September 2011, Scottsdale AZ. (Best Student Hardware Winner)

130. Hobeck, J. and Inman, D. J., 2011, “Energy Harvesting from Turbulence-Induced Vibration in Air Flow:

Artificial Piezoelectric Grass Concept”, Proceedings ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, September 2011, Scottsdale AZ. (Best Student Paper Finalist)

131. Anicezio, M.M., Erturk, A., De Marqui Junior, C., Priya, S., and Inman, D. J., 2011, “Linear and Nonlinear

Aeroelastic Energy Harvesting Using Electromagnetic Induction”, Proceedings ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, September 2011, Scottsdale AZ.

132. Wang, Y., and Inman, D. J., 2011, “Simultaneous Energy Harvesting and Gust Alleviation for a

Multifunctional Wing Spar Using Reduced Energy Control Laws via Piezoceramics”, Proceedings ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, September 2011, Scottsdale AZ.

133. Wang, Y. and Inman, D. J., 2011, “Composites with Simultaneous Vibration Control, Energy Harvesting

and Self-Sensing Capabilities”, Proceedings of the 18th International Conference on Composite Materials, August 2011, on CD.

134. Daneshmehr, A.R., Inman, D. J., and Nateghi, A. R., 2011, “Free Vibration Analysis of Cracked Composite

Beams Subjected to Coupled Bending-Torsion Loads Based on a First Order Beam Theory,” Proceedings of the 2011 International Conference on Mechanical Engineering, Robotics and Aerospace, Bucharest, Romania, 20-22 October, 2011, pp. 145-150.

135. Daneshmehr, A.R., Inman, D. J., and Fakhar, A. M., 2011, “Free Vibration Analysis of Cracked FGM

Beam Under Bending-Torsion Loading, Using GDQ Method,” Proceedings of the 2011 International Conference on Mechanical Engineering, Robotics and Aerospace, Bucharest, Romania, 20-22 October, 2011, pp. 157-162.

136. Choi, B., Pasareanu, S., Burdisso, R., Inman, D. J., Johnson, M. and Johnson, M., “Acoustic Source

Localization Using Matched-Field Processing-Based Enhanced MVDR Beamforming in 3-D Complex Urban Environments”, NOISE-Con 2011, July 25-27, 2011, Portland, Oregon (12 Pages on CD).

137. Choi, B., Pasareanu, S., Burdisso, R., Inman, D. J. Johnson, M. and Johnson, M., 2011. “Acoustic Source

Localization Using Matched-Field Processing-Based Enhanced MVDR Beamforming in 3-D Complex Urban Environment,” Proceedings, The Institute of Noise Control Engineering's Annual Conference (NOISE-CON 2011), 25-27 July, 2011, Portland, OR.

Daniel J. Inman ()

138. Anton, S. R. and Inman, D. J., 2011. “Electromechanical Modeling of a Multifunctional Energy Harvesting Wing Spar,” 19th AIAA/ASME/AHS Adaptive Structures Conference, April 4-11, 2011, Denver, Colorado, paper number AIAA-2011-2004.

139. Wang, Y. and Inman, D. J., 2011. “Theoretical and Experimental Comparison of Two Controllers for

Vibration Suppression with Minimum Energy,” 19th AIAA/ASME/AHS Adaptive Structures Conference, April 4-11, 2011, Denver, Colorado, paper number AIAA-2011-1782.

140. Bilgen, O., Butt, L., Day, S. Sossi, C., Weaver, J., Wolek, A., Mason, W. and Inman, D. J., 2011. “A

Novel Unmanned Aircraft with Solid State Control Surfaces: Analysis and Flight Demonstration,” 19th AIAA/ASME/AHS Adaptive Structures Conference, April 4-11, 2011, Denver, Colorado, paper number AIAA-2011-2071.

141. Bilgen, O., Friswell, M. I., Kochersberger, K and Inman, D. J., 2011. “Surface Actuated Variable-Camber

and Variable Twist Morphing Wings Using Piezocomposites,” 19th AIAA/ASME/AHS Adaptive Structures Conference, April 4-11, 2011, Denver, Colorado, paper number AIAA-2011-2072.

142. Karami, M. A., Varoto, P. S. and Inman, D. J., 2011. “Experimental Study of a Nonlinear Hybrid Energy

Harvesting System,” Proceedings of the XIV International Symposium on Dynamic Problems of Mechanics (DINAME 2011), Fleury, A. T., Kurka, P. R. G. (Editors), ABCM, São Sebastião, SP, Brazil, March 13th - March 18th, 2011.

143. Anicezio, M. d. M., DeMariqui, C., Jr., Erturk, A. and Inman, D. J., 2011. “Nonlinear Modeling and

Analysis of a Piezoaeroelastic Energy Harvester,” Proceedings of the XIV International Symposium on Dynamic Problems of Mechanics (DINAME 2011), Fleury, A. T., Kurka, P. R. G. (Editors), ABCM, São Sebastião, SP , Brazil, March 13th - March 18th, 2011

144. Anton, S. R. and Inman, D. J., 2011. “Performance Modeling of Unmanned Aerial Vehicles with On-

Board Energy Harvesting,” Proceedings, 18th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 6-10 March 2011, Paper number 7977-53.

145. Bonakdar, M., Seidel, G. D., and Inman, D.J., 2011. “Damping Identification of Viscoelastic Composites

using Micromechanical Approaches,” SPIE Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7978-48.

146. Erturk, A. and Inman, D. J., 2011. “Piezoelectric Power Generation for Civil Infrastructure Systems,” SPIE

Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7983-73.

147. Wang, Y. and Inman, D. J., 2011. “Energy-Based Comparison of Various Controllers for Vibration

Suppression Using Piezoceramics,” SPIE Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7977-60.

148. Yun, J., Ha, D. S., and Inman, D. J., 2011. “Adverse Event Detection (AED) Integrated System for

Continuously Monitoring and Evaluating Structural Health Status,” SPIE Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7977-63.

149. Scapra, F.L., Narojczyk, J., Wojciechwski, K. W. and Inman, D. J., 2011. “Carbon Nanotube

Hetrojunctions: Unusual Deformations and Mechanical Vibration Properties,” SPIE Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7980-2.

150. Godinez, V. F., Inman, D. J., Ziehl, P. H., Giurgiutiu, V., Nanni, A., 2011. “Recent Advances in the

Development of a Self-Powered Wireless Sensor Network for Structural Health Prognosis,” SPIE Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7983-72.

Daniel J. Inman ()

151. Karami, M. A. and Inman, D. J., 2011. “Energy Harvesting from Heartbeats for Pacemakers,” SPIE

Conference on Smart Materials and Structures/NDE, 6 - 10 March, San Diego, California, paper number 7977-2.

152. Erturk, A., and Inman, D.J., 2011. “Broadband Vibration Energy Harvesting Using Bistable Beams and

Plates,” ACerS Electronic Materials and Applications 2011, Orlando, FL, 19-21 January 2011.

153. Owen, R. B., Inman, D. J., and Ha, D. S., 2010. “A Multi-mode Structural Health Monitoring System for Wind Turbine Blades and Components,” Annual Conference of the Prognostics and Health Management Society, Oct. 18-20, 2010, Portland, Oregon. 7 Pages on CD.

154. Arrieta, A.F., Hagedorn, P., Erturk, A. and Inman, D.J., 2010. “Dynamics and Morphing of a Bi-stable

Plate,” Proceedings of the 21st International Conference on Adaptive Structures and Technologies (ICAST 2010), State College, PA, 4-6 October 2010.

155. Gambier, P., Anton, S.R., Kong, N., Erturk, A., and Inman, D.J., 2010, Combined Piezoelectric, Solar and

Thermal Energy Harvesting for Multifunctional Structures with Thin-film Batteries, Proceedings of the 21st International Conference on Adaptive Structures and Technologies (ICAST), State College, PA, 4-6 October 2010.

156. Erturk, A., Lee, H.Y., and Inman, D.J., 2010, Investigation of Soft and Hard Ceramics and Single Crystals

for Resonant and Off-resonant Piezoelectric Energy Harvesting, Proceedings of the 3rd ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, PA, 28 September - 1 October 2010.

157. Arrieta, A.F., Erturk, A., Hagedorn, P., and Inman, D.J., 2010, Electromechanical Modeling and

Experiments of a Bistable Plate for Nonlinear Energy Harvesting, Proceedings of the 3rd ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, PA, 28 September - 1 October 2010.

158. Afshari, M., Butrym, B., and Inman, D. J., 2010, “Quantifying Temperature Effects on Crack Size Studies

in Metallic Structures Using Vibration Based Health Monitoring,” Proceedings of the 3rd ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, PA, 28 September - 1 October 2010. Paper Number SMASIS2010-3793.

159. Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J., 2010, On the Manifestation and Influence of

Material Nonlinearity in Electroelastic Power Generators, Proceedings of the 3rd ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, PA, 28 September - 1 October 2010.

160. Penny, J.E.T., Friswell, M. I., and Inman, D. J., “ Efficient Frequency Analysis for Wireless Structural

Health Monitoring Systems”, Proceedings ISMA, Leuvan , Belgium, September 20-22, 2010.

161. Zhao, J., Kasarda, M., Spangler, D., Prins, R. and Inman, D., 2010. “Active Magnetic Bearing System Identification Using Current-Position Perturbation,” Proceedings, 12th International Symposium on Magnetic Bearings, Wuhan, China, 21-24 August.

162. Erturk, A. and Inman, D. J., 2010. “Assumed-Modes Formulation of Piezoelectric Energy Harvesters:

Euler-Bernoulli, Rayleigh and Timoshenko Models with Axial Deformations,” Proceedings, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, 12-14 July.

163. Butt, L., Day, S., Weaver, J. , Sossi, C , Wolek, A., Bilgen, O., Mason, W. and Inman, D. J., “Wing

Morphing Design Utilizing Macro Fiber Composite Smart Materials”, Proceedings 69th Annual Conference of the Society of Weight Engineers, Virginia Beach, May 23-26, 2010.

Daniel J. Inman ()

164. Vieira, W.G.R., De Marqui, C., Erturk, A., and Inman, D. J., 2010. “Frequency Domain PIezo-Aero-Elastic Analysis and Optimization on an Energy Harvesting Wing,” Proceedings, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 12-15 April 2010, Orlando Florida, AIAA paper number AIAA-2010-3065

165. Ji, H., Qiu, J., Cheng, J., and Inman, D. J., 2010. “Application of a Negative Capacitance Circuit in

Synchronized Switch Damping Techniques for Vibration Suppression,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Vol. 7643, Paper number 76432V-1.

166. Anton, S. R., Erturk, A., and Inman, D. J., 2010. “Strength Analysis of Piezoceramic Materials for

Structural Considerations in Energy Harvesting for UAVs,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper number 7643-13.

167. Erturk, A., Vieira, W. G. R., De Marquis, C. and Inman, D.J., 2010. “Piezoelectric Energy Harvesting from

Flow Excitation: Modeling and Experiment,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7643-22.

168. Karami, M. A. and Inman, D. J., 2010. “Nonlinear Vibrations of the Piezo-electromagnetic Structure for

Energy Harvesting,” Proceedings, 17th SPIE Annual International Symposium on Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7643-31.

169. Zhou, D., Kong, N. , Ha, D. S. and Inman D. J., 2010. “A Self-powered Wireless Sensor Node for

Structural Health Monitoring,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7650-34.

170. Deyerle, D., Ha, D. S. and Inman D. J., 2010. “A Low-Power System Design for Lamb Wave Methods,”

Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7650-43.

171. Qing, X. P., Anton, S. R., Zhang, D., Kumar. A., Inman, D. J. and Ooi, T. K., 2010. “Autonomous Self-

Powered Structural Health Monitoring System,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7650-35.

172. Dodson, J.C., Foley, J.R. and Inman, D. J., 2010. “Structural Health Monitoring of an Impulsively Loaded

Structure Using Wave Propagation Based Instantaneous Baseline,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7650-116.

173. Ozevin, D., Godinez, V., Lowenhar, E. P., Carlos, M. F., Inman, D. J., Lallart, M., Ziehl, P. H., Nanni, A.,

and Matta, F., 2010. “Self Powered Wireless Acoustic Emission Sensor,” Proceedings, 17th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010, Paper Number 7649-24.

174. Kong, N., Cochran, T., Ha, D.S., Lin, H.C., and Inman, D. J., 2010, “A Self-Powered Power Management

Circuit for Energy Harvested by a Piezoelectric Cantilever,” in Proceedings, 25th Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 21-25 February 2010, Palm Springs, CA, pp. 2154-2160.

Daniel J. Inman ()

175. M. Lallart, and D. J. Inman, 2010. “Mechanical Effect of Combined Piezoelectric and Electromagnetic Energy Harvesting,” Proceedings, IMAC XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 1-4 February 2010.

176. S. Bressers, M. Lallart, D. J. Inman, and S. Priya, 2010. “Contact-less Windmill Utilizing Magnetically

Driven, Vibrating Piezoelectric Bimorphs,” Proceedings, IMAC XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 1-4 February 2010.

177. M. A. Karami, and D. J. Inman, 2010. “Experimental Vibration Analysis of the Zigzag Structure for

Energy Harvesting,” Proceedings, IMAC XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 1-4 February 2010.

178. Vieira, W.G.R. , De Marqui, C. Erturk, A. and Inman, D. J., 2010. “Frequency Domain Solution of a

Piezo-aero-elastic Wing for Energy Harvesting,” Proceedings, IMAC XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 1-4 February 2010.

179. Erturk, A., and Inman, D. J., 2010, “Limit Cycle Oscillations of a Nonlinear Piezo-magneto-elastic

Structure for Broadband Vibration Energy Harvesting,” Proceedings, IMAC XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 1-4 February 2010.

180. Ohanian, O.J. , Gelhausen, P. A. and Inman, D. J., 2010, “A Compact Method for Modeling the

Aerodynamics of Ducted Fan Vehicles”, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida, 4-7 January 2010, paper number AIAA-2010-1052.

181. M. A. Karami, and D. J. Inman, 2009. “Parametric Study of Zigzag Micro-Structures for Vibrational

Energy Harvesting,” Proceedings, 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, Power MEMS 2009, 1-4 December, Washington, DC.

182. Faria , C. T., Lopes Jr., V., and Inman D. J., 2009. “Overview on Self-Healing Bolted Joint Using Shape

Memory Alloys,” Proceedings, 20th International Congress of Mechanical Engineering, Gramado, RS, Brazil, 15-20 November.

183. M. Lallart, S. Priya, S. Bressers and D. J. Inman, 2009. “Small-Scale Piezoelectric Energy Harvesting

Devices Using Low Density Sources,” International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA) 2009, JeJu, Korea, 9-11 November 2009 (invited).

184. Bilgen, O., De Marqui, C. Jr., Kochersberger, K. B. and Inman, D. J., 2009, “Piezoceramic Composite

Actuators for Flow Control of a Variable Camber Airfoil”20th ICAST, Chinese University of Hong Kong, Hong Kong, China, October 20, 2009

185. Anton, S. R., Erturk, A., Kong, N. , Ha, S. A. and Inman, D. J., 2009, “Self-Charging Structures using

Piezoceramics and Thin-Film Batteries,” ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 21-23, 2009, Oxnard, California.

186. Ashfari, M., Bytrum, B. A. and Inman, D. J., 2009, “On Quantifying Detectable Fatigue Crack Size in

Aluminum Beams Using Vibration and Impedance Based Methods,” ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Paper number SMASIS2009-1394, September 21-23, 2009, Oxnard, California.

187. De Marqui, Jr., C., Erturk, A., and Inman, D.J., 2009, Effect of Segmented Electrodes on Piezo-Elastic and

Piezo-Aero-Elastic Responses of Generator Plates, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, 20-24 September 2009.

Daniel J. Inman ()

188. Hills, Z., Kim, M. H. and Inman, D. J., 2009, “Bioinspiered Motion of Jellyfish Using Fiber Composites,” ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Paper number SMASIS2009-1408, September 21-23, 2009, Oxnard, California.

189. Inman, D. J. and Lallart, M., 2009. “Electronic Interfaces For Efficient Vibration Energy Harvesting,”

International Symposium On Piezocomposite Applications (ISPA 2009), Dresden, Germany, 24-25 September.

190. Zhou, D., Kim, J. K., Bile, J.L.K., Shebi, A. B., Ha, D. S., and Inman, D.J., 2009, “Ultra Low-Power

Autonomous Wireless Structural Health Monitoring Node,” Proceedings, 7th International Workshop on Structural Health Monitoring, Stanford, CA, 9-11 September, pp. 797-804.

191. Afshari, M., Park, S. and Inman, D. J., 2009, “The Early Stage Crack Detection using Non-Linear Feature

Extraction of the Self-Sensing Piezoelectric Impedance Measurements,” Proceedings, 7th International Workshop on Structural Health Monitoring, Stanford, CA, 9-11 September, pp. 1885- 1894.

192. Park, S., Anton, S. R., Inman, D. J., Kim, J.K., and Ha, D. S., 2009, “Instantaneous Baseline Damage

Detection using a Low Power Guided Waves System,” Proceedings, 7th International Workshop on Structural Health Monitoring, Stanford, CA, 9-11 September, pp. 505-513.

193. Matta, F., Zihel, P., Ozevin, D., Inman, D. J., Giancasopro, J., Metrovich, B., Nanni, A., Caicedo, J.,

Gassman, S., Giurgiutiu, V., Nuyh, N., Yu, L., Zarae, V., Godinez, B., Gostuatas, R., Momeni, S., and Priya. S., 2009, “Self Powered Wireless Sensor Network for Structural Bridge Health Prognosis: a 5-year Research and Development Project for Infrastructure Sustainability,” Proceedings, 7th International Workshop on Structural Health Monitoring, Stanford, CA, 9-11 September, pp. 1747 -1756.

194. Karami, M. A., and Inman, D.J., 2009. “Electromechanical Modeling of the Low Frequency MEMS Energy

Harvester,” Proceedings, 22nd Biennial Conference on Mechanical Vibration and Noise (VIB) at the ASME Design Engineering Technical Conference, Paper number DETC2009-87710, San Diego, CA, August 30 – September 2, 2009.

195. Erturk, A., Anton, S. R., Bilgen, O., and Inman, D. J., 2009, “Effect of Material Constants and Mechanical

Damping on Piezoelectric Power Generation,” Proceedings, 22nd Biennial Conference on Mechanical Vibration and Noise (VIB) at the ASME Design Engineering Technical Conference, San Diego, CA, August 30 – September 2, 2009.

196. Park, S. H., Inman, D. J., and Grisso, B. L., 2009. “Fatigue Crack Identification Using Nonlinear

Impedance Features,” Proceedings, The Sixth International Workshop on Advanced Smart Materials and Smart Structures Technology, ANCRiSST09, Boston, MA, 29 July – 1 August.

197. De Marqui, Jr., C., Erturk, A., and Inman, D. J., 2009, “Piezo-Aero-Elastically Coupled Modeling and

Analysis of Electrical Power Generation and Shunt Damping for a Cantilever Plate,” Proceedings, The 17th International Conference on Composite Materials, Edinburgh, UK, 27-31 July.

198. Anton, S. R., Erturk, A., and Inman, D. J., 2009, “An Investigation on Multifunctional Piezoelectric

Composite Spars for Energy Harvesting in Unmanned Aerial Vehicles,” Proceedings, The 17th International Conference on Composite Materials, Edinburgh, UK, 27-31 July.

199. Ohanian, O.J. , Karni, E. D., Lodenberg, W.K., Gelhausen, P. A. and Inman, D. J., 2009, “Ducted-Fan

Force and Moment Control via Steady and Synthetic Jets,” Proceedings AIAA Applied Aerodynamics Conference, June 2009, San Antonio, TX, paper number AIAA 2009-3622.

200. Erturk, A., Anton, S. R., Tarazaga, P. A., and Inman, D. J., 2009, “Analytical Modeling and Experimental

Verification of a Broadband Piezoelectric Energy Harvester,” Proceedings, Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, VA, 24-27 June.

Daniel J. Inman ()

201. De Marqui, Jr., C., Erturk, A., and Inman, D. J., 2009, “Finite Element Analysis of a UAV Wing Spar with Piezoceramics for Vibration Energy Harvesting,” Proceedings, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, 4-7 May, Paper No. AIAA-2009-2139.

202. Bilgen, O., Ohanian, J.O., Kochersberger, K.B., Inman, D. J., 2009. “Novel, Bi-Directional, Variable

Camber Airfoil via Macro-Fiber Composite Actuators,” Proceedings, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, 4-7 May, Paper No. AIAA-2009-2133.

203. Karami, M. A., Yardimoglu, I, and Inman D. J., 2009, “Coupled Out of Plane Vibrations of Spiral Beams,”

Proceedings, 50th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, 4-7 May, Paper No. AIAA-2009-2469.

204. Erturk, A., Anton, S. R., and Inman, D. J., 2009, “Piezoelectric Energy Harvesting from Multifunctional

Wing Spars for UAVs – Part 1: Coupled Modeling and Preliminary Analysis,” Proceedings, The 16th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March, SPIE Paper No. 7288-10 on CD.

205. Anton, S. R., Erturk, A., and Inman, D. J., 2009, “Piezoelectric Energy Harvesting from Multifunctional

Wing Spars for UAVs – Part 2: Experiments and Storage Applications,” Proceedings, The 16th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March SPIE Paper No. 7288-11 on CD.

206. Karami, M. A., and Inman, D. J., 2009. “Vibration Analysis of Zigzag Micro-Springs for Energy

Harvesting Application,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7288-7 on CD.

207. Kim, J. K., Zhou, D., Ha, D. S. and Inman D. J., 2009. “A Practical System Approach for Fully

Autonomous Multi-Dimensional Structural Health Monitoring,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7292-56 on CD.

208. Zhou, D. , Quensenberry, J. Kim, J.K., Ha, D. S. and Inman, D. J., 2009. “A System Approach For

Temperature Dependency Of Impedance-Based Structural Health Monitoring,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7293-29 on CD.

209. Kim, J. K., Zhou, D., Ha, D. S. and Inman D. J., 2009. “A Structural Health Monitoring System for Self-

Repairing,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7295-100 on CD.

210. Owen, R. B., Butrym, B. A., Afshari, M and Inman, D. J., 2009. “On Quantifying Detectable Crack Size in

Metallic Structures Using Vibration and Lamb Waves,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7295-37 on CD.

211. Kim, W. K., Kurdila, A. J., Stepanyan, V., Inman, D. J., and Vignola, J. F., 2009. “Averaging Models For

Linear Piezostructural Systems,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper 7288-58 on CD.

212. Channels, L., Chakraborty, B. A., Kovvali, N. V., Spicer, J. B., Papandreou-Suppappola, A. and Inman, D.

J., 2009. “A Comparative Study of Fatigue Damage Sensing in Aluminum Alloys Using Electrical Impedance and Laser Ultrasonic Methods,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7295-46 on CD.

Daniel J. Inman ()

213. Dodson, J. C., Inman, D.J., and Foley, J. R., 2009. “Microsecond Structural Health Monitoring in Impact Loaded Structures,” Proceedings, SPIE’s 16th Annual Smart Structures and Materials Conference, 8-13 March, San Diego, CA, SPIE Paper No. 7295-43 on CD.

214. Foley, J. R., Dodson, J. C., Schmidt, M., Gillespie, P, Dick, A. J., and Inman, D. J., 2009. “Wideband

Characterization of the Shock and Vibration Response of Impact-Loaded Structures,” Proceedings, IMAC-XXVII Conference & Exposition on Structural Dynamics, Orlando, FL, 9-12 February.

215. Erturk, A. and Inman, D. J., 2009. “Parameter Identification and Optimization for Cantilevered

Piezoelectric Energy Harvesters Based on the Coupled Distributed Parameter Solution,” Proceedings, IMAC-XXVII Conference & Exposition on Structural Dynamics, Orlando, FL, 9-12 February.

216. De Marqui, Jr., C., Erturk, A., and Inman, D. J., 2009, “Piezo-Aero-Elastic Analysis of a Unimorph

Cantilever for Vibration Energy Harvesting,” 4th Annual Energy Harvesting Workshop, Blacksburg, VA, 28-29 January.

217. Inman, D. J., Erturk, A., and Bilgen, O., 2008. “Morphing, Monitoring and Harvesting using Smart

Materials,” Proceedings, XII International Conference on Mechanical Engineering, Bratislava, Slovakia, 13-14 November, L. Starek and B. Hucko, Eds.

218. Erturk, A., Bilgen, O., and Inman, D. J., 2008. “Performance Analysis of Single Crystal PMN-PZT

Unimorphs for Piezoelectric Energy Harvesting,” Proceedings, ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems (SMASIS2008), Ellicott City, MD, 28-30 October, Paper No. SMASIS08-528.

219. Renno, J. and Inman, D. J., 2008. “Reduced Order Modeling of a Circular Membrane with MFC Bimorphs

for Adaptive Optics,” Proceedings, ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems (SMASIS2008), Ellicott City, MD, 28-30 October, Paper No. SMASIS08-538.

220. Tarazaga, P. A., Johnson, M. E., and Inman, D. J., 2008. “Modeling and Vibration Suppression of a

Pressurized Optical Membrane,” Proceedings, ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems (SMASIS2008), Ellicott City, MD, 28-30 October, Paper No. SMASIS08-536.

221. Dodson, J., Foley, J. R., and Inman, D. J., 2008, “Transient Structural Health Monitoring in Impact-

Loaded Simple Structures,” Proceedings, 79th Shock and Vibration Symposium, Orlando, FL, 26-30 October.

222. Erturk, A., Bilgen, O., Fontenille, M., and Inman, D. J., 2008. “Piezoelectric Energy Harvesting from

Macro-Fiber Composites with an Application to Morphing-Wing Aircrafts,” Proceedings, 19th International Conference on Adaptive Structures and Technologies (ICAST), Ascona, Switzerland, 6-9 October, on CD.

223. Bilgen, O., Erturk, A., Inman, D. J., and Kochersberger, K. B., 2008. “Macro-Fiber Composite Actuated

Thin Clamped-Free Benders and Thin Simply-Supported Morphing Airfoils,” Proceedings, 19th International Conference on Adaptive Structures and Technologies (ICAST), Monte Verità, Ascona, Switzerland, 6-9 October, on CD.

224. Moura, Jr., J. R. V., Rade, D. A., Steffen, Jr., V., and Inman, D. J., 2008. “Clustering Methods Applied To

Damage Detection Classification Procedures,” Proceedings, The 9th International Conference on Motion and Vibration Control (MOVIC 08), Technische Universitaet München, Germany, 15-18 September, Paper No. 1183.

225. Salehian, A., and Inman, D. J., 2008. “Thermally Induced Torsional Vibrations of the Innovative Space-

Based Radar Antenna Technology (ISAT),” Proceedings, The ISMA International Conference on Noise and Vibration Engineering, Leuven, Belgium, 15-17 September, Paper No. 433 on CD.

Daniel J. Inman ()

226. Erturk, A. and Inman, D. J., 2008. “Piezoelectric Shunt Damping for Chatter Suppression in Machining

Processes,” Proceedings, The ISMA International Conference on Noise and Vibration Engineering, Leuven, Belgium, 15-17 September, Paper No. 296 on CD.

227. Kasarda, M., Inman, D., Quinn, D., Bash, T., and Kirk, R. G., 2008. “Facilitating Smart Rotating

Machinery through the Application of Active Magnetic Bearing Technology,” Proceedings, IMECHE 9th International Conference on Vibrations in Rotating Machinery, University of Exeter, Exeter, UK, 8-10 September, IMechE paper number C633/093/08, pp. 85-96.

228. Salehian, A., and Inman, D. J., 2008. “Micro-Polar Continuum Modeling of a Lattice Structure: Theory

and Experiment,” Proceedings, The Ninth International Conference on Computational Structures Technology, Athens, Greece, 2-5 September.

229. Ohanian, O. J., Gelhausen, P., and Inman, D. J., 2008. “Evaluation of Macro Fiber Composite (MFC)

Synthetic Jet Actuators,” Proceedings, 26th AIAA Applied Aerodynamics Conference, Honolulu, Hawaii, 18 - 21 August, AIAA Paper No. 2008-6405.

230. Park, S. H., Shin, H. H., Yun, C. B., Park, G., and Inman, D. J., 2008. “Active Piezoelectric Sensor Nodes

and Sensor Self-Diagnosis for Structural Health Monitoring,” Proceedings, The Fourth International Conference on Bridge Maintenance, Safety, and Management – IABMAS08, Seoul, Korea, 13-17 July.

231. Erturk, A. and Inman, D. J., 2008, “Electromechanical Modeling of Piezoelectric Energy Harvesters for

Persistent Ambient Vibrations,” The Mechanics Conference to Celebrate the 100th Anniversary of the Department of Engineering Science and Mechanics, Blacksburg, VA, 29-30 May.

232. Park, S. H., Yun, C. B., Lee, J. J., and Inman, D. J., 2008. “Principal Component Analysis-Based Data

Compression for Impedance-Based Wireless Structural Health Monitoring,” Proceedings, ASEM ’08 Conference, Jeju, Korea, 25-28 May.

233. Erturk, A., Renno, J. M. and Inman, D. J., 2008. “Energy Harvesting from a Piezoelectric Bender through

Rigid Body Motion of a Two-Link Manipulator,” Proceedings, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Schaumburg, IL, 7-10 April, Paper No. AIAA 2008-2204.

234. Erturk, A., and Inman, D. J., 2008. “Analytical Modeling of Cantilevered Piezoelectric Energy Harvestors

for Transverse and Longitudinal Base Motions,“ Proceedings, 49th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, Schaumburg, IL, 7-10 April, Paper No. AIAA 2008-2202.

235. Bilgen, O., Kochersburger, K. A., and Inman, D. J., 2008. “A Novel Aerodynamic Vectoring Control

Airfoil vis Macro Fiber Composite Actuators,” Proceedings, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Schaumburg, IL, 7-10 April, Paper No. AIAA 2008-1700.

236. Salehian, A. and Inman, D. J., 2008. “A One-Dimensional Model of a Space Antenna Structure with

Torsional and Rigid Joints,” Proceedings, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Schaumburg, IL, 7-10 April, Paper No. AIAA 2008-1954.

237. Moura, J.R.V., Steffen, V., Jr., and Inman, D. J., 2008, “Optimization of Monitoring Parameters of Space

Tubular Structures Using Genetic Algorithms,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6926, Paper No. 6926-31.

238. Moura, J.R.V., Steffen, V., Jr., and Inman, D. J., 2008, “A Damage Classification Technique for Impedance

Based Health Monitoring of Helicopter Blades,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6932, Paper No. 6932-129.

Daniel J. Inman ()

239. Diggs, E. C., Bilgen, O., Kurdila, A.J., and Inman, D. J., 2008. “Structural Characteristics via SLDV for a

Class of Morphing Micro Air Vehicles,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6561, No. 65611F-12.

240. Erturk, A., Renno, J. M. and Inman, D. J., 2008. “Piezoelectric Energy Harvesting From An L-Shaped

Beam-Mass Structure,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6928, No. 6928-19.

241. Park, S., Yun, C. B., Inman, D. J., and Park, G., 2008. “Wireless Structural Health Monitoring For Critical

Members Of Civil Infrastructures Using Piezoelectric Active Sensors,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6935, No. 6935-82.

242. Renno, J. M., Kurdila, A. J., and Inman, D. J., 2008. “Switching Sliding Mode Control For A Membrane

Strip With MFC Actuators,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6926, No. 6926-09.

243. Schlichting, A. D., Anton, S. R., and Inman, D. J., 2008. “Motorcycle-Waste Heat-Energy Harvesting

Smart Vehicles Workshop,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6930, No 6930-10.

244. Bilgen, O., Kochersburger, K. B., and Inman, D. J., 2008. “An Analytical Study Of A Novel Flow

Vectoring Airfoil Via Macro-Fiber-Composites,” Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6930, No 6930-24.

245. Anton, S.R., and Inman, D. J., 2008. “Vibration Energy Harvesting For Micro Air Vehicle Sensors,”

Proceedings, SPIE’s 15th Annual Smart Structures and Materials Conference, San Diego, CA, 9-13 March, SPIE Vol. 6928, No. 6928-86.

246. Anton, S. R., Erturk, A., and Inman, D. J., 2008. “Energy Harvesting from Small Unmanned Air

Vehicles,” Proceedings, Third Annual Energy Harvesting Workshop at the 2008 IEEE ISAF, Santa Fe, NM, 25-28 February, Paper No. EH013.

247. Moura, J.R.V., Jr., Park, S., Steffan, V., and Inman, D. J., 2008. “Fuzzy Logic Applied to Damage

Characterization through SHM Techniques,” Proceedings, XXVI SEM International Modal Analysis Conference (IMAC XXVI), Orlando, FL, 4-7 February, Paper No. 146, on CD.

248. Cartmell, M. P., D. J. Inman, A. W. Lees, O. A. Ganilova, and L. Atepor, 2008, "Smart Materials

Applications to Structural Dynamics and Rotating Machines," pp. 19-28. 249. Grisso, B. L., Kim, J., Ha, D. S., and Inman, D. J., 2008. “Sensor Diagnostics for Autonomous Digital

Structural Health Monitoring Systems,” Proceedings, XXVI SEM International Modal Analysis Conference (IMAC XXVI), Orlando, FL, 4-7 February, Paper No. 218, on CD.

250. Kim, J., Grisso, B.L., Kim, J.K., Ha, D.S., and Inman, D. J., 2008. “Electrical Modeling of Piezoelectric

Ceramics for Analysis and Evaluation of Sensory Systems,” Proceedings, IEEE Sensors Applications Symposium, Atlanta, GA, 12-14 February, Paper #1569078840.

251. Ruggiero, E., Inman, D. J., and Marker, D., 2007. “A Novel Basis for Membrane Adaptive Optics – The

Clamped Zernille Radial Polynomials,” Proceedings, ASME IMECE, Seattle, WA, 9-15 November, Paper No. IMECE2007-41187.

252. Renno, J. M., Reddy, C. K., Inman, D. J. and Ruggiero, E. J., 2007. “Sliding Mode Control for a

Membrane Mirror Strip Actuated Using Multiple Smart Actuators,” Proceedings, ASME IMECE, Seattle, WA, 9-15 November, Paper No. IMECE2007- 41016.

Daniel J. Inman ()

253. Erturk, A., Anton, S. R., and Inman, D. J., 2007. “Energy Harvesting from Rigid Body Motion,” Proceedings, 18th International Conference on Adaptive Structures and Technologies (ICAST), Ottawa, Ontario, Canada, 3-5 October 2007, 13 pages on CD.

254. Allison, T. C., Miller, A. K., and Inman, D. J., 2007. “System Identification Techniques for Mixed

Responses Using the Proper Orthogonal Decomposition,” Proceedings, ASME IDETC/CIE, Las Vegas, NV, 4-7 September, Paper No. DETC2007-35407.

255. Erturk, A. and Inman, D. J., 2007. “Mechanical Considerations for Modeling of Vibration-Based Energy

Harvesters,” Proceedings, ASME IDETC/CIE, Las Vegas, NV, 4-7 September, Paper No. DETC2007-35440.

256. Renno, J., Tarazaga, P., Grisso, B., and Inman, D. J., 2007. “A New Approach for Changing Structural

Properties of a Membrane Mirror Strip for Adaptive Optics Applications,” Proceedings, ASME IDETC/CIE, Las Vegas, NV, 4-7 September, Paper No. DETC2007-34091.

257. Renno, J., Daqaq, M., Farmer, J., and Inman, D. J., 2007. “Parameter Optimization of a Vibration Based

Energy Harvester with an RL Electric Circuit,” ASME’s 21st Biennial Conference on Mechanical Vibration and Noise, Las Vegas, NV, 4-7 September, Paper No. DETC2007-35487.

258. Grisso, B. L., Kim, J., Farmer, J. R., Ha, D. S., and Inman, D. J., 2007. “Autonomous Impedance-Based

SHM Utilizing Harvested Energy,” Proceedings, International Workshop on Structural Health Monitoring, Stanford University, CA, 11-13 September, F. –K. Chang, Ed, DEStech Publications, pp. 1373-1380.

259. Lees, A.W., Jana, S., Inman, D. J., and Cartmell, M. P., 2007. “The Control of Bearing Stiffness Using

Shape Memory,” Proceedings, ISCORMA-4, Calgary, Alberta, Canada, 27-30 August.

260. Diggs, E. C., Bilgen, O., Kurdila, A. J., Kochersberger, K. B., Inman, D. J. and Vignola, J., 2007, “Structural characteristics via SLDV for a class of morphing micro-air-vehicles,” Unmanned Systems Technology IX. Proc. SPIE, Volume 6561, pp. 65611F.

261. Bilgen, O., Kochersberger, K., Diggs, E., Kurdila, A. and Inman, D., 2007, “Morphing Wing Aerodynamic

Control Via Macro-Fiber-Composite Actuators in an Unmanned Aircraft”, AIAA Infotech@ Aerospace 2007 Conference and Exhibit, pp. 2741.

262. Yun, C. B., Park, S. H., Inman, D. J., and Park, G. H, 2007. “Active Piezoelectric Sensor Nodes and

Sensor Self-Diagnosis for Structural Health Monitoring,” Proceedings, 9th Korea-Japan Joint Seminar on Steel Bridges, Inha University, Incheon, Korea, 22-24 August.

263. Daghia, F., Inman, D. J., Ubertini, F., and Viiola, E., 2007. “Experimental Testing of a Shape Memory

Alloy Hybrid Composite Plate for Active Shape Control,” Proceedings, III ECCOMAS Thematic Conference On Smart Structures And Materials, Gdansk, Poland, 9-11 July.

264. Inman, D. J. and Erturk, A., 2007, “Energy Harvesting Using Smart Materials,” Proceedings, III

ECCOMAS Thematic Conference on Smart Structures and Materials, Gdansk, Poland, 9-11 July.

265. Inman, D. J., Farmer, J., and Grisso, B., 2007. “Energy Harvesting for Autonomous Sensing,” Proceedings, 7th International Conference on Damage Assessment of Structures (DAMAS 2007), 25-27 June, Torino, Italy; Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 347, pp. 405 -410.

266. Allison, T. C. and Inman, D. J., 2007. “System Identification Using the Proper Orthogonal Decomposition

with Multiple Loads,” Proceedings, 2007 SEM Annual Conference, 4-6 June, Springfield, MA.

267. Kim, J., Ha, D.S., Grisso, B., and Inman, D. J., 2007. “Digital Wideband Excitation Technique for Impedance-Based Structural Health Monitoring Systems,” Proceedings, 2007 IEEE International

Daniel J. Inman ()

Symposium on Circuits and Systems (ISCAS 2007), May 27-30, New Orleans, LA, pp. 3566-3569.

268. Kim, J., Grisso, B., Ha, D. S., and Inman, D. J., 2007. “An All-Digital Low-Power Structural Health Monitoring Systems,” Proceedings, 2007 IEEE Conference on Technologies for Homeland Security, May 16-17, Woburn, MA, pp. 123-128.

269. Kasarda, M., Bash, T., Quinn, D., Mani, G., Inman, D., and Kirk, R.G., 2007. “A New Approach for

Health Monitoring and Detection of a Shaft Crack Using an Active Magnetic Actuator During Steady-State Rotor Operation,” Proceedings, ASME/IGTI Turbo Expo 2007, May 14-17, Montreal, Canada.

270. Daqaq, M., Renno, J., Farmer, J., and Inman, D. J. , 2007. “Effects of System Parameters and

Nonlinearities on an Optimal Vibration-Based Energy Harvester,” Proceedings, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 23-27, Hawaii, Paper No. AIAA-2007-2361.

271. Gandi, N., Jha, A., Seigler, T. M., Monaco, J., Inman, D. J., and Howard, D., 2007. “Intelligent Control of

a Morphing Aircraft,” Proceedings, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 23-27, Waikiki, Hawaii, Paper No. AIAA-2007-1716.

272. Bilgen, O., Kurdila, A., and Inman, D. J., 2007. “Macro Fiber Composites for Wing Morphing Micro-Air-

Vehicles,” Proceedings, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 23-27, Waikiki, Hawaii, Paper No. AIAA-2007-1785.

273. Allison, T. C., Miller, A. K., and Inman, D. J., 2007. “Unforced Response Simulation by Proper

Orthogonal Value Recalculation,” Proceedings, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 23-27, Waikiki, Hawaii, Paper No. AIAA -2007-2395.

274. Pitchford, C., Grisso, B., and Inman, D. J., 2007. “Impedance-Based Structural Health Monitoring of

Wind Turbine Blades,” Proceedings, SPIE’s 14th Annual Symposium on Smart Structures and Materials/NDE and Health Monitoring Conference, 18-22 March, San Diego, CA, Paper No. 6532-54.

275. Kim, J., Grisso, B.L., Dong, S.H. and Inman, D. J., 2007. “A System-On-Board Approach for Impedance-

Based Health Monitoring,” Proceedings, SPIE’s 14th Annual Symposium on Smart Structures and Materials/NDE and Health Monitoring Conference, 18-22 March, San Diego, CA, Vol. 6529, pp. 6529001-6529009..

276. Anton, S. R., Park, G., Farrar, C. R., and Inman, D. J., 2007. “On Piezoelectric Lamb Wave-Based

Structural Health Monitoring Using Instantaneous Baseline Measurements,” Proceedings, SPIE’s 14th Annual Symposium on Smart Structures and Materials/NDE and Health Monitoring Conference, 18-22 March, San Diego, CA, Paper No. 6529-22.

277. Inman, D. J., and Soutas-Little, R. W., 2007. “Virtues of Teaching Mechanics and Vibrations with

Computational Software,” Proceedings, 25th International Modal Analysis Conference (IMAC), February 19-22, Orlando, FL, Paper No. 19 on CD.

278. Renno, J. and Inman, D. J., 2007. “Modeling of a Membrane Mirror Strip Actuated Using Multiple Active

Fiber Composites,” Proceedings, 25th International Modal Analysis Conference (IMAC), February 19-22, Orlando, FL, Paper No. 281 on CD.

279. Moura, J. R. V., Jr., Steffen, V., Jr., and Inman, D. J., 2007. “Influence of Environmental Changes in

Structural Health Monitoring Analysis as Applied to Aeronautical Structures,” Proceedings, 25th International Modal Analysis Conference (IMAC), February 19-22, Orlando, FL, Paper No. 196 on CD.

Daniel J. Inman ()

280. Moura, J. R. V., Jr., Steffen, V., Jr., Park, S., and Inman, D. J., 2007. “Damage Characterization Based on Impedance Based Signatures and Lamb Wave Techniques,” Proceedings, 25th International Modal Analysis Conference (IMAC), February 19-22, Orlando, FL, Paper No. 192 on CD.

281. Sodano, H. A. and Inman, D. J., 2006, “Experimental Validation of an Active Eddy Current Vibration

Control Scheme,” Proceedings, SPIE’s 13th Annual International Symposium on Smart Structures and Materials, San Diego, CA, February 26-March 2.

282. Park, S. H., Yun, C. B., and Inman, D. J., 2006. “Wireless Structural Health Monitoring Using an Active

Sensing Node,” Proceedings, 19th KKCNN Symposium on Civil Engineering, Kyoto, Japan, 10-12 December.

283. Park, S. H., Lee, J. J., Yun, C. B., and Inman, D. J., 2006. “PCA-Data Compression for Impedance-Based

Wireless Structural Health Monitoring Framework,” Proceedings, Asia-Pacific Workshop on Structural Health Monitoring, Yokohama, Japan, 4-6 December.

284. Bilgen, O., Inman, D. J., Kurdilla, A. J. and Lind, R., 2006, “Active Materials for Wing Morphing Micro-

Air-Vehicles,” Paper and Poster presentation at the AUVSI's Unmanned Systems North America 2006 Conference, Orlando, FL.

285. Park, S. H., Lee, J. J., Yun, C. B., and Inman, D. J., 2006. “Impedance-Based Wireless Structural Health

Monitoring Using PCA-Data Compression and K-means Clustering Algorithm,” Proceedings, The US-Korea Workshop on Smart Structures Technologies, Seoul, Korea, 16-17 November.

286. Salehian, A., Seigler, T. M., and Inman, D. J., 2006. “Control of the Continuum Model of a Large Flexible

Space Structure,” Proceedings, ASME’s International Mechanical Engineering Congress & Exposition (IMECE), Chicago, IL, November 5-10, Paper No. IMECE2006-13362.

287. Daghia, F., Seigler, T. M., Inman, D. J. and Viola, E., 2006. “Constitutive Modeling of SMA in

Constrained Recovery Mode,” Proceedings, ASME’s International Mechanical Engineering Congress & Exposition (IMECE), Chicago, IL, November 5-10, Paper No. IMECE2006-15616.

288. Ruggiero, E. J. and Inman, D. J., 2006. “Modeling and Control of a 2-D Membrane Mirror with a PZT

Bimorph,” Proceedings, ASME’s International Mechanical Engineering Congress & Exposition (IMECE), Chicago, IL, November 5-10, Paper No. IMECE2006-14475.

289. Renno, J., Tarazaga, P., Seigler, T. M., and Inman, D. J., 2006. “Modeling of a Membrane Strip Actuated

Using a Piezoelectric Bimorph,” Proceedings, ASME’s International Mechanical Engineering Congress & Exposition (IMECE), Chicago, IL, November 5-10, Paper No. IMECE2006-13224.

290. Park, S. H., Yun, C. B., and Inman, D. J., 2006. “A Self-Contained Active Sensor System for Health

Monitoring of Civil Infrastructures,” Proceedings, 5th IEEE Conference on Sensors, Daegu, Korea, 22-25 October.

291. Kasarda, M., Bash, T., Quinn, D., Mani, G., Ehmann, C., Inman, D., Kirk, R.G., 2006. “Active Magnetic

Bearings for the Interrogation of Rotating Machinery for Crack Detection,” Proceedings, 4th China-Japan-US Symposium on Structural Control and Monitoring, Hangzhou, China, 16-17 October.

292. Yun, C. B., Park, S. H., and Inman, D. J., 2006. “Health Monitoring of Railroads Using PZT Active

Sensors Associated with Support Vector Machines,” Proceedings, 4th China-Japan-US Symposium on Structural Control and Monitoring, Hangzhou, China, 16-17 October.

293. Park, S. H., Grisso, B. L., Inman, D. J., and Yun, C. B., 2006. “A New Active Sensing Device for Wireless

Telemetry-Based Structural Health Monitoring,” Proceedings, 4th International Conference on Earthquake Engineering, Taipei, Taiwan, 12-13 October.

Daniel J. Inman ()

294. Friswell, M. I., Sawicki, J. A., Inman, D. J., and Lees, A., 2006. “The Response of Rotating Machines on Viscoelastic Supports,” Proceedings, ISMA International Conference on Noise and Vibration Engineering, September 18-20, Leuven, Belgium.

295. Tarazaga, P. A., Peairs, D. M and Inman, D. J., 2006. “A Study on the Correlation between PZT and MFC

Resonance Peaks and Damage Detection Frequency Intervals Using the Impedance Method,” Proceedings, ISMA International Conference on Noise and Vibration Engineering, September 18-20, Leuven, Belgium.

296. Tarazaga, P. A., Halevi, Y., and Inman, D. J. 2006. “The QCM Approach for Model Updating from Noisy

Data,” Proceedings, ISMA International Conference on Noise and Vibration Engineering, September 18-20, Leuven, Belgium.

297. Ruggiero, E. J. and Inman. D. J., 2006. “Vibration Testing Techniques for Active Membranes,”

Proceedings, ISMA International Conference on Noise and Vibration Engineering, September 18-20, Leuven, Belgium.

298. Inman, D. J., Carmell, M. P., Lees, A. W., Leize, T., and Atepor, L., 2006. “Proposals for Controlling

Flexible Rotor Vibrations by Means of an Antagonistic SMA/Composite Smart Bearing,” Modern Practice in Stress and Vibration Analysis VI, Applied Mechanics and Materials Vols. 5-6, Ed , Tans Tech Publications Switzerland, 2006, pp. 29-36 (Proceedings, 6th International Conference on Modern Practice in Stress and Vibration Analysis, September 5-7, Bath, UK).

299. Inman, D. J., 2006. “Structural Mechanics for Adaptive Optics,” Proceedings, AFOSR Contractors’

Meeting on Mechanics of Multifunctional Materials and Microsystems Structural Mechanics, 28 August – 1 September, 2006, Seattle, WA.

300. Park, S. H., Inman, D. J., and Yun, C. B., 2006. “A Built-in Active Sensing System-based Structural

Health Monitoring Technique Using Statistical Pattern Recognition,” Proceedings, The 8th International Conference on Motion and Vibration Control, Daejeon, Korea, 28-30 August.

301. Kasarda, M., Quinn, D., Bash, T., Mani, G., Inman, D., Kirk, R. G., Stephens, L.S., 2006. “A Magnetic

Bearing Actuator for Detection of Shaft Cracks in Rotating Machinery Supported in Conventional Bearings,” Proceedings, Tenth International Symposium on Magnetic Bearings (ISMB 10), Martigny, Switzerland, 21-23 August, 2006.

302. Inman, D. J., 2006. “Vibration and Control of Flexible Spacecraft: Old Lessons and New Problems,” 7th

International Conference on Dynamics and Control of Systems and Structures in Space, July 16-20, Greenwich, UK, (Keynote). Also published in Dynamics and Control of Systems and Structures in Space, Ed. S. Hobbs, Cranfield University Press, Cranfield, UK, 2006, pp. 293-305.

303. Park, S. H., Grisso, B. L., Inman, D. J., and Yun, C. B., 2006. “MFC-Based Corrosion Detection Using a

Miniaturized Impedance Measuring Chip,” Proceedings, 4th World Conference on Structural Control and Monitoring (WCSCM), 11-13 July, San Diego, CA.

304. Daghia, F., Ubertini, F., Viola, E., and Inman, D. J., 2006. “A Finite Element Model For SMA Hybrid

Composite Plates,” Proceedings (In Atti del Convegno), GIMC 2006, Bologna, Italy, 26-28 June.

305. Tarazaga, P. A., Grisso, B. L., Drennan, A. C., Inman, D. J., and Wilkie, W. K., 2006. “Laser Vibrometry Measurements for Dynamic Testing of an Inflatable Strut,” Proceedings, 7th International Conference on Vibration Measurements by Laser Techniques, June 19-22, Ancona, Italy.

306. Kasarda, M., Terpenny, J., Inman, D., Precoda, K., Jelesko, J., and Park, J., 2006. “Design for Adaptability

(DFAD) – A New Concept for Achieving Sustainable Design,” Proceedings, Conference on Flexible and Intelligent Manufacturing (FAIM) ’06, June, 2006, University of Limerick, Ireland.

Daniel J. Inman ()

307. Park, S., Inman, D. J., Yun, C.B., and Park, G. H., 2006. “An Outlier Analysis for Damage Detection of Railroad Tracks using MFC Impedance-Based Wireless SHM System,” Proceedings, 3rd International Workshop on Advanced Smart Materials and Smart Structures Technology Conference (ANCRiSST2006) , May 28-30, Lake Tahoe, CA.

308. Ruggiero, E. J. and Inman, D. J., 2006. “Enhancing the Effective Bandwidth of a Membrane Optic Using a

Shallow, Fluid-Filled Cavity,” Proceedings, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Gossamer Spacecraft Forum, May 1 - 4, 2006, Newport, RI, Paper number AIAA-2006-1975, on CD.

309. Tarazaga, P. A., Inman, D. J. and Wilkie, W. K., 2006. “Control of a Space Rigidizable-Inflatable Boom

Using Embedded Piezoelectric Composite Actuators,” Proceedings, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Gossamer Spacecraft Forum, May 1 - 4, 2006, Newport, RI, Paper number AIAA-2006-1976, on CD.

310. Seigler, T. M., Neal, D., and Inman, D. J., 2006. “Dynamic Modeling of Morphing Aircraft,” Proceedings,

47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Gossamer Spacecraft Forum, May 1 - 4, 2006, Newport, RI, Paper number AIAA-2006-1893, on CD.

311. Salehian, A., Cliff, E., and Inman, D. J., 2006. “Natural Frequencies of an Innovative Space Based Radar

Antenna by Continuum Modeling,” Proceedings, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Gossamer Spacecraft Forum, May 1 - 4, 2006, Newport, RI, Paper number AIAA-2006-2101, on CD.

312. Neal, D., Farmer, J, and Inman, D. J., 2006. “Development of a Morphing Aircraft Model for Wind Tunnel

Experimentation,” Proceedings, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Gossamer Spacecraft Forum, May 1 - 4, 2006, Newport, RI, Paper number AIAA-2006-2141, on CD.

313. Friswell, M. I. and Inman, D. J., 2006. “Morphing Concepts for UAVS,” Proceedings, 21st International

Unmanned Air Vehicle Systems Conference, 3-5 April, Bristol, United Kingdom, pp. 13.1-13.8.

314. Marker, D. K., Wilkes, M. M., Ruggiero, E. J., and Inman, D. J., 2006. “Membrane Adaptive Optics,” Proceedings, SPIE’s 13th Annual Symposium on Smart Structures and Materials, 26 Feb. – 2 March, San Diego, CA, Paper No. 5894-44, in Advanced Wavefront Devices: Methods, Devices, and Applications III, Mark T. Gruneisen, John D. Gonglewski, and Michael K. Giles, eds., pp. 360 - 367.

315. Park, S. H., Yun, C. B., Roh, Y., and Inman, D. J., 2006. “Active Sensing Network System for Crack

Detection on Welded Zone of Steel Truss Members,” Proceedings, SPIE’s 13th Annual Symposium on Smart Structures and Materials/NDE Conference, 26 Feb. – 2 March, San Diego, CA, Vol. 6174, pp. 384-394.

316. Tarazaga, P. A., Peairs, D. M., Wilkie, W. K, and Inman, D. J., 2006. “Structural Health Monitoring of an

Inflatable Boom Subjected to Simulated Micrometeoroid/Orbital Debris Damage,” Proceedings, SPIE’s 13th Annual Symposium on Smart Structures and Materials/NDE Conference, 26 Feb. – 2 March, San Diego, CA.

317. Inman, D. J. and Grisso, B. 2006. “Towards Autonomous Sensing,” Proceedings, SPIE’s 13th Annual

Symposium on Smart Structures and Materials/NDE Conference, 26 Feb. – 2 March, San Diego, CA.

318. Inman, D. J. and Grisso, B., 2006. “Broken Rail Track Detection Using Smart Structures,” Proceedings, SPIE’s 13th Annual Symposium on Smart Structures and Materials/NDE Conference, 26 Feb. – 2 March, San Diego, CA.

Daniel J. Inman ()

319. Sodano, H. A. and Inman, D.J., 2006. “Experimental Validation of an Active Eddy Current Vibration Control Scheme,” Proceedings, SPIE’s 13th Annual International Symposium on Smart Structures and Materials/NDE Conference, 26 Feb. – 2 March, San Diego, CA.

320. Sodano, H. A. and Inman, D. J., 2006. “Model of an Active Eddy Current Vibration Control System,”

Proceedings, SPIE’s 13th Annual Symposium on Smart Structures and Materials/NDE Conference, 26 Feb. – 2 March, San Diego, CA.

321. Moura, J. R. V., Jr., Steffen, V., Jr., and Inman D. J., 2006. “Strength and Damage Characterization in an

Aircraft Rib Structure,” Proceedings, XXIV International Modal Analysis Conference (IMAC XXIV), St. Louis, Missouri, January 30 - February 2, Paper No. 154.

322. Inman, D.J., Cartmell, M.P., Lees, A.W., Leize, T. and Atepor, L., 2006. Proposals for controlling

flexible rotor vibrations by means of an antagonistic SMA/composite smart bearing. In Applied Mechanics and materials (Vol. 5, pp. 29-36). Trans Tech Publications. Proceedings of Modern Practice in Stress and Vibration Analysis VI.

323. Tarazaga, P. A., Inman D. J. and Wilkie, K. W., 2006. “Structural Health Monitoring of Space

Rigidizeable-Inflated Booms,” Proceedings, XXIV International Modal Analysis Conference (IMAC XXIV), St. Louis, Missouri, January 30 - February 2, Paper No. 120.

324. Salehian, A., Inman, D. J. and Cliff, E. M., 2006. “Natural Frequency Validation of a Homogenized Model

of a Truss,” Proceedings, XXIV International Modal Analysis Conference (IMAC XXIV), St. Louis, Missouri, January 30 - February 2.

325. Park, S. H., Yun, C. B., and Inman, D. J., 2005. “Damage Detection of Civil Structures Using Piezoelectric Sensor-Based Active Sensing Techniques,” Proceedings, 18th KKCNN Symposium on Civil Engineering, Kaohsiung, Taiwan, 19-21 December.

326. Ruggiero, E. J. and Inman, D. J., 2005. “Modeling and Control of a 1-D Member Membrane Strip with an

Integrated PZT Bimoprh,” Proceedings, ASME’s International Mechanical Engineering Congress & Exposition, Orlando, Florida , November 5-11, Paper Number ASME2005-80974.

327. Simmers. G. E., Sodano, H. A., Heibel, S., and Inman, D. J., 2005. “Self-Sensing Active Control in the

Presence of Temperature Changes,” Proceedings, 16th International Conference on Adaptive Structures and Technologies (ICAST), Paris, France, 9-12 October, M. Bernadou, J. Cagnol, and R. Ohayon, Eds., DEStech Publications, Inc., Lancaster, PA, pp. 342-349.

328. Salehian, A., E. M. Cliff, and D. J. Inman, 2005. “Continuum Modeling of a Slewing ISAT (Innovative

Space Antenna Technology),” Proceedings, IDETC/CIE 2005 (ASME 2005 International Design Engineering Technical Conferences and Computers in Information in Engineering Conference), September 24-28, Long Beach, CA, Paper No. DETC2005-84025 (on CD).

329. Tarazaga, P. A. , Halevi, Y., and Inman, D. J., 2005. “Model Updating Using a Quadratic Form,”

Proceedings, ASME’s 20th Biennial Conference on Mechanical Vibration and Noise, September 24-28, Long Beach, CA, Paper No. DETC2005-84786 (on CD).

330. Peairs, D. M., Park, G., and Inman, D. J., 2005. “Sensing Area Analysis for Actuator Placement in

Impedance-Based SHM,” Proceedings, 5th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, pp. 1328-1334.

331. Simmers, G. E., Sodano, H.A., and Inman, D. J., 2005. “Improved Impedance-Based Structural Health

Monitoring to Detect Corrosion,” Proceedings, 5th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, pp. 1162-1169.

Daniel J. Inman ()

332. Grisso, B. L. and Inman, D. J., 2005. “Developing an Autonomous On-Orbit Impedance-Based SHM System for Thermal Protection Systems,” Proceedings, 5th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, pp. 435-442.

333. Mani, G., Quinn, D.D., Kasarda, M. E., Inman, D. J. and Kirk, R. G., 2005. “Non-Destructive Evaluation

(NDE) of Rotordynamic Systems by Wavelet Analysis,” Proceedings, ICME 05/085, Washington, DC.

334. Quinn, D., Mani, G., Kasarda, M., Inman, D., Kirk, R.G., 2005. “Damage Detection of a Rotating Cracked Shaft with External Excitation,” Proceedings, ISCORMA-3 Conference, Cleveland, OH, September, pp. 24-33.

335. Kasarda, M., Quinn, D., Bash, T., Mani., G., Inman, D. J., Kirk, G. and Sawicki, J. T., 2005. “Magnetic

Bearings for Non-Destructive Health Monitoring of Rotating Machinery in Conventional Bearings Proceedings, 4th International Conference on Damage Assessment of Structures (DAMAS 05), Gdansk, Poland, 4-6 July, pp. 383-390.

336. Peairs, D. M, Park, G., and Inman, D. J., 2005. “Simplified Modeling for Impedance-Based Health

Monitoring,” Proceedings, 4th International Conference on Damage Assessment of Structures (DAMAS 05), Gdansk, Poland, 4-6 July.

337. Marques, R. F. A., Inman, D. J., and Rade, D. A., 2005. “Assessment of Adaptive Techniques for the

Control of Structures Subject to Temperature Variations,” Proceedings, Twelfth International Congress on Sound and Vibration, Lisbon, Portugal, 11-16 July.

338. Salehian, A., and Inman, D. J., 2005. “A Distributed Parameter Model of an ISAT,” Proceedings, 6th SIAM

Conference on Control and its Applications, July 11-14, New Orleans, LA.

339. Sodano, H.A., Bae, J.S., Inman, D. J. and Belvin, W.K., 2005. “Model of Eddy Current Damper for the Suppression of Transverse Membrane Vibrations,” Proceedings, 46th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference (SDM), April 18-21, Austin, TX.

340. Simmers, G.E., Sodano, H.A., Park, G., and Inman, D. J., 2005. “Impedance-Based Corrosion Detection,”

Proceedings, SPIE’s 12th Annual International Symposium on Smart Structures and Materials, 7-10 March, San Diego, CA, on CD.

341. Sodano, H.A., Bae, J.S., Inman, D. J. and Belvin, W.K., 2005. “Passive-Active Eddy Current Damper,”

Proceedings, SPIE’s 12th Annual International Symposium on Smart Structures and Materials, 7-10 March, San Diego, CA, on CD.

342. Sodano, H.A., Bae, J.S., Inman, D. J. and Belvin, W.K., 2005. “Improved Eddy Current Damping Model

for Transverse Vibrations,” Proceedings, 23rd Annual International Modal Analysis Conference (IMAC XXIII), Jan. 31 - Feb. 3, Orlando, FL, on CD.

343. Simmers, G.E., Sodano, H.A., Park, G., and Inman, D. J., 2005. “Impedance Based Structural Health

Monitoring to Detect Corrosion,” Proceedings, 23rd Annual International Modal Analysis Conference (IMAC XXIII), Jan. 31 - Feb. 3, Orlando, FL, on CD.

344. Grisso, B. L., Martin, L. A., and Inman, D. J., 2005. “A Wireless Active Sensing System for Impedance-

Based Structural Health Monitoring,” Proceedings, 23rd Annual International Modal Analysis Conference (IMAC XXIII), Jan. 31 - Feb. 3, Orlando, FL, on CD. Peairs, D. M., Park, G., and Inman, D. J., 2005. “Impedance Based SHM Modeling Using Spectral Elements and Circuit Analysis,” Proceedings, 23rd Annual International Modal Analysis Conference (IMAC XXIII), Jan. 31 - Feb. 3, Orlando, FL, on CD.

Daniel J. Inman ()

345. Inman, D. J., Sodano, H. A., and Park, G., 2004, “Piezoelectric Materials for Structures: A State of the Art and Future of Harvesting,” Proceedings, Air Force/Army/NSF Joint Workshop on Multifunctional Structures for Energy Harvesting & Storage, Palo Alto, CA, December 15-17.

346. Sodano, H.A., Bae, J.S., Inman, D. J., and Belvin, W.K., 2004, “Model of Eddy Current Damping

Mechanism for the Suppression of Beam Vibrations,” Proceedings, 2004 ASME International Mechanical Engineering Congress and Exhibition, November 13-19, Anaheim, CA.

347. Salehian, A., Sodano, H. A., Cliff, E. M., Herdman, T. L., Burns, J. A., and Inman, D. J., 2004, “Slewing

Issues in LSS/ISAT (Integration of Smart Materials),” Proceedings, NASA-LaRC, Hampton, VA.

348. Williams, R. B., Inman, D. J. and Wilkie, W. K., 2004. “Nonlinear Response of the Macro Fiber Composite Actuator to Monotonically increasing Excitation Voltages,” Proceedings, 2004 ASME International Mechanical Engineering Congress and Exhibition, Anaheim, CA, November 13-19, IMECE2004-60569 on CD.

349. Ruggiero, Eric J., Tarazaga, Pablo A., and Inman, Daniel J., 2004. “Modal Analysis of an Ultra-flexible,

Self-rigidizing Toroidal Satellite Component,” Proceedings, 2004 ASME International Mechanical Engineering Conference and Exhibition, Paper No. IMECE2004-60113, November 13-19, Anaheim, CA.

350. Seigler, T. M., Bae, J. S., and Inman, D. J., 2004. “Flight Control of a Variable Span Cruise Missile,”

Proceedings, 2004 ASME International Mechanical Engineering Congress and Exposition, Paper No. IMECE2004-61961, November 13-19, Anaheim, CA.

351. Ruggiero, Eric J., John Singler, John Burns, and Daniel J. Inman. “Finite Element Formulation for Static

Shape Control of a Thin Euler-Bernoulli Beam using Piezoelectric Actuators,” Proceedings, 2004 ASME International Mechanical Engineering Conference and Exhibition, Paper No. IMECE2004-60117, November 13-19, Anaheim, CA.

352. Inman, D. J., Ruggiero, E. J. and Lalli, J. H., 2004. “Composite Materials with Embedded Sensing,”

Proceedings, AIAA /CANEUS Conference on Micro-NanoTechnologies: From Concepts to Systems, Monterey, CA, November 1-5, on CD.

353. Sodano, H.A., Dereux, R., Simmers, G.E., and Inman, D. J., 2004. “Power Harvesting using Thermal

Gradients from Solar Radiation,” Proceedings, 15th International Conference on Adaptive Structures and Technologies (ICAST), Bar Harbor, Maine, 24-27 October, on CD.

354. Kim, M. H., Kang, S. W., Na, S., Park, G. and Inman, D. J., 2004. “An Impedance-Based Structural Health

Monitoring System with Application to Welded Structures,” Proceedings, 15th International Conference on Adaptive Structures and Technologies (ICAST), Bar Harbor, Maine, 24-27 October, on CD.

355. Sodano, H. A., Bae, J.-S., Inman, D. J., and Belvin W. K., 2004. "Improved Eddy Current Damping Mechanism for Transverse Vibrations,” Proceedings, 15th International Conference on Adaptive Structures and Technologies (ICAST), Bar Harbor, Maine, 24-27 October, on CD.

356. Halevi, Y., Morales, C. and Inman, D. J., 2004. “CEO- a Combined Expansion and Orthogonalization

Method,” Proceedings, ISMA 2004 International Conference on Noise and Vibration, Leuven, Belgium, Sept. 19-22, on CD.

357. Halevi, Y., Tarazaga, P.A. and Inman, D. J., 2004. “Connectivity Constrained Reference Basis Model

Updating,” Proceedings, ISMA 2004 International Conference on Noise and Vibration, Leuven, Belgium, Sept. 19-22, on CD.

358. Wang, K. and Inman, D. J., 2004. “Modal Models of Cracked Composite Beams,” Proceedings, ISMA

2004 International Conference on Noise and Vibration, Leuven, Belgium, Sept. 19-22, on CD.

Daniel J. Inman ()

359. Grisso, B. L., Peairs, D. M., and Inman, D. J., 2004. “Detecting Damage in Graphite/Epoxy Composites Using Impedance-Based Structural Health Monitoring,” in Advances in Experimental Mechanics, M. Lucas, Ed., (Proceedings of the International Conference on Advances in Experimental Mechanics, September 6-8, York, UK), Trans Tech Publications, Ltd., Switzerland, pp. 185-190.

360. Mani, G., Quinn, D., Bash, T., Kasarda, M., Inman, D., Kirk, R.G., 2004. “Damage Detection of a

Rotating Cracked Shaft Using an Active Magnetic Bearing as a Force Actuator,” Proceedings, 9th International Symposium on Magnetic Bearings (ISMB9), Lexington, KY, Aug. 3-6.

361. Wang, K., and Inman, D. J., 2004. “Crack Induced Changes in Flutter Speed as a Damage Prognosis

Tool,” Proceedings, Second European Workshop on Structural Health Monitoring, July 7-9, Ed. by C. Boller and W. J. Staszewski, Munich, Germany, pp. 1027-1035.

362. Antonios, C. and Inman, D. J., 2004. “Modeling of Self-Healing Bolted Joints,” Proceedings, 2004 SEM

X International Congress, June 7-10, Costa Mesa, CA.

363. Bae, J. S., Seigler, T. M., Inman, D. J., and Lee, I., 2004. “Aerodynamic and Aeroelastic Consideration of a Variable-Span Morphing Wing ,” Proceedings, 12th AIAA/ASME/AHS Adaptive Structures Conference (45th SDM), April 19-22, Palm Springs, CA, Paper No. AIAA-2004-1726 (on CD).

364. Wiggins, L. D., Stubbs, M. D., Johnston, C. O., Robertshaw, H. H., Reinholtz, C. F., and Inman, D. J.,

2004. “A Design and Analysis of a Morphing Hyper-Elliptic Cambered Span (HECS) Wing,” Proceedings, 12th AIAA/ASME/AHS Adaptive Structures Conference (45th SDM), April 19-22, Palm Springs, CA, Paper No. AIAA-2004-1885 (on CD).

365. Neal, D. A., Good, M.G., Johnston, C. O., Robertshaw, H. H., Mason, W. H., and Inman, D. J., 2004. “Design and Wind-Tunnel Analysis of a Fully Adaptive Aircraft Configuration,” Proceedings, 12th AIAA/ASME/AHS Adaptive Structures Conference (45th SDM), April 19-22, Palm Springs, CA, Paper No. AIAA-2004-1727 (on CD).

366. Wilkie, W.K., Inman, D. J., Lloyd, J. M. , and High, J. W., 2004. “Anisotropic Piezocomposite Actuator Incorporating Machined PMN-PT Single Crystal Fibers,” Proceedings, 12th AIAA/ASME/AHS Adaptive Structures Conference (45th SDM), April 19-22, Palm Springs, CA, Paper No. AIAA-2004-1889 (on CD).

367. Sodano, H. A., Lloyd, J. M. and Inman, D. J., 2004. “Experimental Comparison Between Several Active

Composite Actuators for Power Generation,” Proceedings, SPIE’s 11th Annual International Symposium on Smart Structures and Materials, 14-18 March, San Diego, CA, on CD, paper number 5390-43.

368. Allen, D. W., Peairs, D. M, and Inman, D. J., 2004. “Damage Identification by Merging Statistical

Methods with PZT Impedances,” Proceedings, SPIE’s 11th Annual International Symposium on Smart Structures and Materials, 14-18 March, San Diego, CA, on CD, paper number 5390-59.

369. Lloyd, J. M., Williams, R.B., Inman, D. J., and Wilkie, W. K., 2004. “An Analytical Model of the

Mechanical Properties of Single-Crystal Macro Fiber Composite Actuators,” Proceedings, SPIE’s 11th Annual International Symposium on Smart Structures and Materials, 14-18 March, San Diego, CA, on CD, paper number 5387-08.

370. Peairs, D. M., Grisso, B. L., Margasahayam, R. N., Page, K. R., and Inman D. J., 2004. “Proof-of Concept

Application of Impedance-Based Health Monitoring on Space Shuttle Ground Structures,” Proceedings, SPIE’s 9th Annual International Symposium on NDE for Structural Health Monitoring, 14-18 March, San Diego, CA, on CD, paper number 5394-15, pp. 99-107.

371. Grisso, B. L., Leo, D. J., and Inman, D. J., 2004. “Temperature Effects on the Wave Propagation

Technique for use in Supplementing Impedance Based Structural Health Monitoring,” Proceedings, SPIE’s 9th Annual International Symposium on NDE for Structural Health Monitoring, 14-18 March, San Diego, CA, on CD, paper number 5394-19, pp. 222-232.

Daniel J. Inman ()

372. Sodano, H. A., Park, G., and Inman, D.,J., 2004. “Review of Power Harvesting Advances and

Applications,” Proceedings, International Modal Analysis Conference (IMAC XXII), January 26-29, Dearborn, MI.

373. Grisso, B. L., Peairs, D. M., and Inman, D. J., 2004. “Impedance-Based Health Monitoring of

Composites,” Proceedings, International Modal Analysis Conference (IMAC XXII), January 26-29, Dearborn, MI.

374. Tarazaga, P.A., Halevi, Y., and Inman, D. J., 2004. “Model Updating with the Use of Principal

Submatrices,” Proceedings, International Modal Analysis Conference (IMAC XXII), January 26-29, Dearborn, MI.

375. Mason, W. H., Robertshaw, H. H., and Inman, D. J., 2004. “Recent Experiments in Aerospace and Design

Engineering Education,” Proceedings, 42nd AIAA Aerospace Sciences Meeting and Exhibit, 5-8 January, Reno, Nevada, paper number AIAA-2004-0415.

376. Asmatulu, R., Claus, R. O., Mecham, J. B., and Inman, D. J., 2003. “The Temperature Dependent

Damping Behaviors of Novel Nanocomposites for Structural Materials Applications,” Proceedings, MRS Fall Meeting, December 1-5, Boston, MA, Paper No. Q2.7.

377. Elahini, M., Ashrafiuong, A., Ahmadian, M., and Inman, D. J., 2003. “Application of the Extended

Kalman Filter to Control of a Shape Memory Alloy Arm,” Proceedings, 2003 ASME International Mechanical Engineering Congress and R&D Expo, November 15-21, Washington, DC, Paper No. IMECE2003-42013.

378. Sodano, H. A., Park, G., Leo, D. J., and Inman, D. J., 2003. “Model of Piezoelectric Power Harvesting

Beam,” Proceedings, 2003 ASME International Mechanical Engineering Congress and R&D Expo, November 15-21, 2003, Washington, DC, Paper No. IMECE2003-43250.

379. Williams, R. B., Inman, D. J., and Wilkie, W. K., 2003. “Nonlinear Actuation Properties of Macro Fiber

Composite Actuators,” Proceedings, 2003 ASME International Mechanical Engineering Congress and R&D Expo, November 15-21, 2003, Washington, DC, Paper No. IMECE2003-41205.

380. Hesse, T., Ghorashi, M. and Inman, D. J., 2003. “Comparison of the Experimental Behavior of a Shape

Memory Alloy in Compression and Tension,” Proceedings, 2003 ASME International Mechanical Engineering Congress and R&D Expo, November 15-21, 2003, Washington, DC, Paper No. IMECE2003-43786.

381. Ruggiero, E. J., Bonnema, G. T., and Inman, D. J., 2003. “Application of SISO and MIMO Modal

Analysis Techniques on a Membrane Mirror Satellite,” Proceedings, 2003 ASME International Mechanical Engineering Congress and R&D Expo, November 15-21, 2003, Washington, DC, Paper No. IMECE2003-41710.

382. Schultz, M. R., Hyer, M. W., Williams, R. B., Inman, D. J., and Wilkie, W. K., 2003. “Use of Piezoelectric

Actuators to Effect Snap-Through Behavior of Unsymmetric Composite Laminates,” Proceedings, American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-22, 2003.

383. Williams, R. B., Schultz, M. R., Hyer, M. W., Inman, D. J., and Wilkie, W. K., 2003. “Nonlinear Tensile

and Shear Behavior of Macro Fiber Composite Actuators,” Proceedings, American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-22.

384. Kim, M. H., Kang, S. W., Park, G., and Inman, D. J., 2004. “Application of Sliding Mode Observer for

Simultaneous Vibration Control and Structural Health Monitoring,” Proceedings, Fourteenth International Conference on Adaptive Structures and Technologies, Seoul, Korea, October 7-9, 2003, S. J. Kim, Y. Kim, and J. W. Park, Eds., DEStech Publications, Inc., Lancaster, PA, pp. 195-203.

Daniel J. Inman ()

385. Bae, J.-S., Seigler, M., and Inman, D. J., 2004. “Aeroelastic Considerations on Shape Control of an

Adaptive Wing,” Proceedings, 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, October 7-9, 2003, S. J. Kim, Y. Kim, and J. W. Park, Eds., DEStech Publications, Inc., Lancaster, PA, pp. 327-336.

386. Inman, D. J., Robertshaw, H. H., and Mason, W. H., 2004. “Morphing UCAVs: Theory and Experiments,”

Proceedings, 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, October 7-9, 2003, S. J. Kim, Y. Kim, and J. W. Park, Eds., DEStech Publications, Inc., Lancaster, PA, pp. 535-556 (Keynote Lecture).

387. Park, G., Inman, D. J., and Farrar, C. R., 2003. “Recent Studies in Piezoelectric Impedance-based

Structural Health Monitoring,” Proceedings, 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15-17, 2003.

388. Peairs, D. M., Park, G., and Inman, D. J., 2003. “On the Circuit Model of Piezoelectric Impedance-based

Health Monitoring,” Proceedings, 4th International Workshop on Structural Health Monitoring, Stanford, CA, September 15-17, 2003.

389. Allen, D. W., Inman, D. J., and Farrar, C. R., 2003. “Optimization of Time Domain Models Applied to

Structural Health Monitoring,” Proceedings, 4th International Workshop on Structural Health Monitoring,” Stanford, CA, September 15-17, 2003.

390. Inman, D. J., 2003. “Vibration Analysis and Control of an Inflatable Structure Using Smart Materials,”

Proceedings, AFOSR Contractors' Meeting, September 8-11, 2003, Santa Fe, New Mexico.

391. Ghorashi, M. and Inman, D. J., 2003. “Recovery of Preload in Bolted Joints Using Shape Memory Ally Elements,” Proceedings, 2003 ASME International Design Engineering Technical Conferences, September 2-6, 2003, Chicago, IL, Paper No. DETC2003/VIB-48527 (on CD).

392. Inman, D. J., 2003. “Smart Materials in Damage Detection and Prognosis,” in Key Engineering Materials

Vols. 245-246 (Proceedings of the 5th International Conference on Damage Assessment of Structures (DAMAS 2003), Southampton, UK, July 1-3, 2003), Ed. by J. M. Dulieu-Barton, M. J. Brennan, K. M. Holford, and K. Worden, Trans Tech Publications Ltd., UK, pp. 3-16.

393. Cundy, A. L., Hemez, F. M., Inman, D. J., and Park, G., 2003. “Use of Response Surface Metamodels for

Damage Identification of a Simple Nonlinear System,” in Key Engineering Materials Vols. 245-246 (Proceedings of the 5th International Conference on Damage Assessment of Structures (DAMAS 2003), Southampton, UK, July 1-3, 2003), Ed. by J. M. Dulieu-Barton, M. J. Brennan, K. M. Holford, and K. Worden, Trans Tech Publications Ltd., UK, pp. 167-174.

394. Seigler, T.M., Elahinia, M.H., Leo, D. J., and Inman, D. J., 2003. “Stress-Based Control of a Single-

Degree-of-Freedom SMA Actuated Arm,” Proceedings, 5th International Conference on Intelligent Materials, Pennsylvania State University, State College, PA, June 15-17, 2003.

395. Silva, L. A., Austin, E. M., and Inman, D. J., 2003. “Investigating the Use of the Shift Factor to Improve

Controller Designs under Temperature Variations,” Proceedings, 5th International Congress on Thermal Stresses and Related Topics, Blacksburg, VA, June 8-11, 2003.

396. Williams, R.B., Inman, D. J. and Wilkie, W. K., 2003. “Temperature-Dependent Coefficients of Thermal

Expansion in Macro Fiber Composite Actuators,” Proceedings, 5th International Congress on Thermal Stresses and Related Topics, Blacksburg, VA, June 8-11, 2003.

397. Cundy, A.L., Inman, D. J., Hemez, F.M., Park, G., 2003. “Damage Identification using a Metamodel

Approach,” Proceedings of Society for Experimental Mechanics Annual Conference, June 2-4 2003, Charlotte, NC.

Daniel J. Inman ()

398. Jha, A. and Inman, D. J., 2003. “Vibration Analysis of a Gossamer Toroidal Structure,” Proceedings,

44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 7-10, 2003, Norfolk, VA, Paper No. AIAA 2003-1833.

399. Johnston, C., Neal, D., Wiggins, L., Robertshaw, H.R., Mason, W. and Inman, D. J., 2003, “A Model to

Compare the Dynamic Performance of Flight Control of Energy Requirements of Morphing and Conventionally Actuated Wings,” Proceedings, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 7-10, 2003, Norfolk, VA, Paper No. AIAA 2003-1716.

400. Sodano, H., Park, G. and Inman, D. J., 2003, “Vibration Testing and Control of an Inflatable Torus Using

Multiple Sensors/Actuators,” Proceedings, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 7-10, 2003, Norfolk, VA, Paper No. AIAA 2003-1644.

401. Williams, R. B., Inman, D. J. and Wilkie, K., 2003. “Nonlinear Mechanical Behavior of Macro Fiber

Composite Actuators,” Proceedings, 6th International Conference on Sandwich Structures, March 30 - April 3, 2003, Ft. Lauderdale FL.

402. Sodano, Henry, A., Park, G., Leo, D. J., and Inman, D. J., 2003. “Electric Power Harvesting Using

Piezoelectric Materials,” Proceedings, SPIE’s 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 2-6, 2003; on CD ROM.

403. Peairs, D. M., Park, G., and Inman, D. J., 2003. “Practical Issues in Self-Repairing Bolted Joints,”

Proceedings, SPIE’s 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 2-6, 2003; on CD ROM.

404. Jha, A. and Inman, D. J., 2003. “Vibration Control of an Ultralight Gossamer Toroidal Structure Using

Smart Material Actuators and Sensors,” Proceedings, SPIE’s 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 2-6, 2003; on CD ROM.

405. Sodano, H., Peairs, D. M., Magliula, E. A., Park, G., and Inman, D. J., 2003. “The Uses of Macro-Fiber

Composites in Structural Vibration Applications,” Proceedings, 21st International Modal Analysis Conference and Exposition on Structural Dynamics (IMAC-XXI), Kissimmee, FL, February 3-6.

406. Tanner, T. and Inman, D. J., 2002. “Combined Shock and Vibration Isolation Through the Optimal Control

of Hybrid "Smart" Mount,” Proceedings, 73rd Shock and Vibration Symposium, Newport Beach, Rhode Island, November 18-22, 2002, on CD ROM (winner of Henry Pusey Award for Paper of the Year).

407. Ruggiero, E., Park, G., Inman, D. J. and Wright, J., 2002. “Multi-Input, Multi-Output Modal Testing

Techniques for a Gossamer Structure,” Proceedings of IMECE’02, 2002 ASME IMECE Adaptive Structures Symposium, November 17-22, 2002, New Orleans, LA.

408. Marques, R. F. A., and Inman, D. J., 2002. “An Analytical Model for a Clamped Isotropic Beam Under

Thermal Effects,” Proceedings of IMECE’02, 2002 ASME IMECE Adaptive Structures Symposium, November 17-22, 2002, New Orleans, LA.

409. Silva, L., Austin, E. M., and Inman, D. J., 2002. “The Role of Internal Variables on the Control of

Visoelastic Structures,” Proceedings of IMECE’02, 2002 ASME IMECE Adaptive Structures Symposium, November 17-22, 2002, New Orleans, LA.

410. Adachi, K., Park, G., and Inman, D. J., 2002. “Passive Damping Augmentation using Macro-Fiber

Composite Actuators,” Proceedings of IMECE’02, 2002 ASME IMECE Adaptive Structures Symposium, November 17-22, 2002, New Orleans, LA, Paper No. IMECE2002-34004.

411. Williams, R. B., Grimsley, B. W., Inman, D. J., and Wilkie, W. K., 2002. “Manufacturing and Mechanics-

Daniel J. Inman ()

Based Characterization of Macro Fiber Composite Actuators,” Proceedings of IMECE’02, 2002 ASME IMECE Adaptive Structures Symposium, November 17-22, 2002, New Orleans, LA.

412. Sodano, H. A., Magliula, E., Park, G., and Inman, D. J., 2002. “Electric Power Generation Using

Piezoelectric Devices,” Proceedings, 13th International Conference on Adaptive Structures and Technologies, Potsdam, Berlin, Germany, October 7-9, 2002, CRC Press, Inc., New York, pp. 153-161.

413. Adachi, K., Park, G, and Inman, D. J., 2002. “Shunting Macro-Fiber Composite Actuator for Structural

Damping”, ISMA 27, Leuven, Belgium, September 16-18, 2002.

414. Natarajan, A., R. K. Kapania, and D. J. Inman, 2002. “Dynamic Aeroelastic Response of Adaptable Airfoils Using Neural Networks," Proceedings, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization Conference, Atlanta, GA, September 4-6, 2002, Paper No. AIAA-2002-5599.

415. Ruggiero, E. and Inman, D. J., 2002. “Active Dynamic Analysis and Vibration Control of Gossamer

Structures Using Smart Materials,” Proceedings, CANEUS Micro-Nanotechnology Workshop, August 29, 2002, Montreal, Canada.

416. Peairs, D. M., Park, G. and Inman, D. J., 2002. “Low Cost Impedance Monitoring Using Smart Materials,”

Proceedings of the 1st European Workshop on Structural Health Monitoring (Paris, France, July 9-12, 2002), D. L. Balageas, Editor, pp. 442-449.

417. Ruggiero, E., Park, G., and Inman, D. J., 2002. “Micro-Fiber Composite Actuators for Inflatable

Structures,” Proceedings, 9th International Congress on Sound and Vibration, July 8-11, 2002, Orlando, FL.

418. Ruggiero, E., Sodano, H.A., Park, G. and Inman, D.J., 2002, “Active Vibration Suppression of a Gossamer

Spacecraft,” Proceedings, 14th U.S. National Congress of Theoretical and Applied Mechanics, June, Blacksburg, VA.

419. Jha, A. K., Park, G. and Inman, D. J., 2002. “Vibration Analysis and Testing of an Inflatable Space

Structure,” Proceedings, International Conference on Structural Dynamics Modelling (Test, Analysis, Correlation and Validation), Ed. by N.M.M Maia, J.M. Montalvao e Silva, and A.M.R. Ribeiro, June 3-5, 2002, Madeira Island, Portugal, pp. 257-265.

420. Ruggiero, E., Park, G., Inman, D. J., Main, J. A., 2002. “Smart Materials in Inflatable Structure

Applications," Proceedings, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Gossamer Spacecraft Forum, 22-25 April 2002, Denver, CO.

421. Gern, F., D. J. Inman, and R. K. Kapania, 2002. “Distributed Actuation of Smart Wings with Morphing

Airfoil Sections,'', Proceedings, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference,'' April 2002, Denver, CO, Paper No. AIAA-2002-1629, 10 pages.

422. Jha, A. K. and Inman, D. J., 2002. “Piezoelectric Actuator and Sensor Models for an Inflated Toroidal

Shell,” Proceedings, SPIE’s 9th Annual International Symposium on Smart Structures and Materials, March 17-21, 2002, San Diego, CA, Paper No. 4701-58.

423. Jha, A. K. and Inman, D. J., 2002. “Optimal Placement of Piezoelectric Actuators and Sensors on an

Inflated Toroidal Shell,” Proceedings, SPIE’s 9th Annual International Symposium on Smart Structures and Materials, March 17-21, 2002, San Diego, CA, Paper No. 4701-62.

424. Peairs, D.M., Park, G., and Inman, D. J., 2002. “Self Healing Bolted Joint Analysis,” Proceedings, Int.

Modal Analysis Conference (IMAC-XX: Conference on Structural Dynamics), February 4-7, 2002, Los Angeles, CA.

425. Lopes, V, Jr., Turra, A. E., Muller-Slany, H.H., Brunzel, F. and Inman, D. J., 2002, “Structural Health

Daniel J. Inman ()

Evaluation by Optimization Techniques and Artificial Neural Networks,” Proceedings, Int. Modal Analysis Conference (IMAC-XX: Conference on Structural Dynamics), February 4-7, 2002, Los Angeles, CA.

426. Silva, L. A. and Inman, D. J., 2002. “On the Application of Independent Modal- Space Control to Internal

Variable-Based Viscoelastic Bar,” Proceedings, Int. Modal Analysis Conference (IMAC-XX: Conference on Structural Dynamics), February 4-7, 2002, Los Angeles, CA.

427. Williams, R. B., Park, G., Inman, D. J. and Wilkie, W. K., 2002. “An Overview of Composite Actuators

with Piezoceramic Fibers,” Proceedings, Int. Modal Analysis Conference (IMAC-XX: Conference on Structural Dynamics), February 4-7, 2002, Los Angeles, CA.

428. Natarajan, A., Kapania, R.K. and Inman, D. J., 2002. “Aeroelastic Analysis of Adaptable Bumps Used as

Drag Rudders,” Proceedings, 40th AIAA Aerospace Sciences Meeting and Exhibit, 14-17 Jan. 2002, Reno, NV, AIAA Paper No. 2002-0707.

429. Carneiro, Sergio, H. S., and Inman, D. J., 2001. “Vibration Diagnostic of Cracked Beams Using Genetic

Algorithms,” Proceedings, 16th Brazilian Congress of Mechanical Engineering (COBEM 2001), Uberlandia, Brazil, November 26-30, 2001, Vol. 12, pp. 320-329.

430. Lopes, V., Jr., Steffen, V., Jr., and Inman, D. J., 2001. “Active Vibration Control Using Piezoceramic

Sensor/Actuator Patches,” Proceedings, 16th Brazilian Congress of Mechanical Engineering (COBEM 2001), Uberlandia, Brazil, November 26-30, 2001, Vol. 12, Paper Number TRB0719, pp. 206-214.

431. Park, G., Ruggiero, E., Sausse, M., Inman, D. J., 2001. “Vibration Testing and Analysis of Inflatable

Structures using Smart Materials,” Proceedings, ASME IMECE Adaptive Structures and Material Systems Symposium, New York, NY, November 11-16, 2001, CD, Vol. 3.

432. Jha, A., Kim, M. and Inman, D. J., 2001. “Sliding Mode Control for the Vibration Suppression of an

Inflatable Torus Using Smart Materials,” Proceedings, ASME IMECE Adaptive Structures and Material Systems Symposium, New York, NY, November 11-16, 2001, CD, Vol. 3.

433. Sausse, M., Ruggiero, E., Park, G., Inman, D. J., and Main, J.A., 2001. “Vibration Testing and Finite

Element Analysis of Inflatable Structures,” Proceedings, 12th International Conference on Adaptive Structures and Technologies (ICAST), College Park, Maryland, October 15-17, 2001, CRC Press, pp. 235-244.

434. Pettit, G. W., Robertshaw, H. H., and Inman, D. J., 2001. “Model to Determine the Performance

Requirements of Adaptive Materials Used to Morph a Wing with an Aerodynamic Load,” Proceedings, 12th International Conference on Adaptive Structures and Technologies (ICAST), College Park, Maryland, October 15-17, 2001, CRC Press, pp. 159-168.

435. Peairs, D. M., Park, G. and Inman, D. J., ,2001, “Investigation of Self-Monitoring and Self-Healing Bolted

Joints,” Proceedings, Structural Health Monitoring 2001, Stanford, CA, September, 2001, Ed. by F-K. Chang, Technomic Press, pp. 430- 439.

436. Park, G., Kim, M., Mattias, M., Inman, D. J., 2001. “Vibration Testing and Control of Inflatable Space

Structures using Smart Materials,” Proceedings, DETC ‘01 (ASME Design Engineering Technical Conferences/18th ASME Biennial Conference on Mechanical Vibration and Noise), Pittsburgh, PA, September 9-12, 2001, Paper No. DETC2001/VIB-21540.

437. Pettit,G.W.,Robertshaw,H.H.,Gern,G.H.andInman,D.J.,2001.“AModeltoEvaluatethe

AerodynamicEnergyRequirementsofActiveMaterialsinMorphingWings,” Proceedings, DETC ‘01 (ASME Design Engineering Technical Conferences/18th ASME Biennial Conference on Mechanical Vibration and Noise), Pittsburgh, PA, September 9-12, 2001, Paper No. DETC2001/VIB-21754.

Daniel J. Inman ()

438. Kim, M-K., and Inman, D. J., 2001. “Application of Sliding Mode Observer for Dynamic Positioning of Ships,” Proceedings, DETC ‘01 (ASME Design Engineering Technical Conferences/18th ASME Biennial Conference on Mechanical Vibration and Noise), Pittsburgh, PA, September 9-12, 2001, Paper No. DETC2001/VIB-21602.

439. Park, G., Muntges, D.E., and Inman, D. J., 2001, “Self-Monitoring and Self-Healing Jointed Structures”, in

Damage Assessment of Structures, (Proceedings of the 4th International Conference on Damage Assessment of Structures (DAMAS 2001), Cardiff, Wales, UK, June 25-28, 2001) Ed. K.M. Holford et al., Trans Tech Publications Ltd., Switzerland, Key Engineering Materials, Vols. 204-205, pp. 75-84.

440. Gern, F. H., Inman, D., J., and Kapania, R. K., 2001. “Distributed Actuation of Smart Wings with

Morphing Airfoil Sections,” Proceedings, CEAS/AIAA/AIAE International Forum on Aeroelasticity and Structural Dynamics, Madrid, Spain, 5-7 June 2001.

441. Inman, D. J., 2001. “Self-Healing Structures,” Proceedings, NSF Workshop on Advanced Sensor

Technology for Civil Engineering Systems, University of Texas, Austin, Texas, April 19-20, 2001 (Proceedings on CD).

442. Natarajan, A., R. K. Kapania, and D. J. Inman, 2001. “Near -Exact Analytical Solutions of Linear Time-

Variant Systems," Proceedings, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, WA, April 16-19, 2001, AIAA-2001-1295, 13 pages.

443. Gern, F., D. J. Inman, and R. K. Kapania, 2001. “Structural and Aeroelastic Modeling of General Planform

UCAV Wings with Morphing Airfoils," Proceedings, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, WA, April 16-19, 2001, Paper No. AIAA-2001-1369, 11 pages.

444. Williams, R. B., Austin, E. M., and Inman, D. J., 2001. “Local Effects of PVDF Patches on Inflatable

Space-Based Structures,” Proceedings, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, WA, April 16-19, 2001.

445. Aktan, E., Chase, S., Inman, D., and Pines, D., 2001. “The Paradigm of Monitoring and Managing the

Health of Infrastructure Systems,” Proceedings of an NSF-Supported Workshop on Health Monitoring of Long-Span Bridges, Irvine, California, 9 March 2001.

446. Lopes, V., Jr., Turra, A. E., Müller-Slany, H. H., Brunzel, F., and Inman, D. J., 2001. “A New

Methodology of Damage Detection by Electrical Impedance and Optimization Technique,” in Dynamic Problems of Mechanics (Proceedings of the 9th Int. Symposium on Dynamic Problems of Mechanics (IX DINAME), 5-9 March 2001, Florianopolis, Brazil), Ed. by J. J. de Espindola, E. M. O. Lopes and F. S. V. Bazan, pp. 311-316.

447. Inman, D. J., Gern, F. H., Robertshaw, H. H., and Kapania, R. K., 2001. “Comments on Prospects of Fully

Adaptive Aircraft Wings,” Proceedings, 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, 4-8 March 2001, Paper No. SS 4332-01, on CD ROM.

448. Inman, D. J., Muntges, D. E., and Park, G., 2001. “Investigation of a Self-Healing Bolted Joint Employing

a Shape Memory Actuator,” Proceedings, 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, 4-8 March 2001, Vol. 4327, on CD ROM.

449. Silva, L. A., Austin, E. M. and Inman, D. J., 2001. “Using State Observers to Model Viscoelastic Effects,”

Smart Structures and Materials 2001: Damping and Isolation, Ed. by Daniel J. Inman, (Proceedings of the SPIE Conference, Newport Beach, CA, 4-8 March 2001), Vol. 4331, pp. 9-20.

450. Ahmadian, M., Jeric, K. M., and Inman, D. J., 2001. “An Experimental Analysis of the Benefits of Shunted

Piezoceramics for Damped and Undamped Structures,” Smart Structures and Materials 2001: Damping

Daniel J. Inman ()

and Isolation, Ed. by Daniel J. Inman, (Proceedings of the SPIE Conference, Newport Beach, CA, 4-8 March 2001), Vol. 4331, pp. 281-293.

451. Rusovici R., Inman, D. J. and Lesieutre, G. A., 2001. “Development and Validation of Anelastic

Displacement Fields-Based Dynamic Finite Elements,” Smart Structures and Materials 2001: Damping and Isolation, Ed. by Daniel J. Inman, (Proceedings of the SPIE Conference, Newport Beach, CA, 4-8 March 2001), Vol. 4331, pp. 312-323.

452. Kim, Myung-Hyun, Park, Gyuhae, and Inman, Daniel J., 2001. “Simultaneous Control and Monitoring of

Adaptive Structures Using Smart Sensors,” Proceedings, IMAC-XIX: A Conference & Exposition on Structural Dynamics, Kissimmee, Florida, 5-8 February 2001.

453. Inman, D. J. and Hegewald, Thomas, 2000. “Simultaneous Health Monitoring and Control of Panels,”

Proceedings of the 11th International Conference on Adaptive Structures and Technologies, Nagoya, Japan, 23-26 October 2000, pp. 309-316.

454. Abe, M., Park, G. and Inman, D. J., 2000. “Impedance-Based Monitoring of Stress in Thin Structural

Members,” Proceedings of the 11th International Conference on Adaptive Structures and Technologies, Nagoya, Japan, 23-26 October 2000, pp. 285-292.

455. Inman, D. J., Ahmadian, M., and Claus, R. O., 2000. “Simultaneous Active Damping and Health

Monitoring of Aircraft Panels,” Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, Magdeburg, Germany, 26-29 September 2000, Ed. by U. Gabbert and H. S. Tzou, Kluwer Academic Publishers, Netherlands, pp. 1-9.

456. Lopes, V., Jr., Müller-Slany, H. H., Brunzel, F., and Inman, D. J., 2000. “Damage Detection in Structures

by Electrical Impedance and Optimization Technique,” Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, Magdeburg, Germany, 26-29 September 2000, Ed. by U. Gabbert and H. S. Tzou, Kluwer Academic Publishers, Netherlands, pp. 239-246.

457. Steffen, Valder, Jr., Rade, D. A., and Inman, D. J., 2000. “Using Passive Techniques for Vibration

Damping in Mechanical Systems,” Proceedings of the 25th International Conference on Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 13-15 September 2000, Vol. 1, pp. 341-348.

458. Lopes, Vicente, Jr., Steffen, Valder, Jr., and Inman, D. J., 2000. “Optimal Design of Smart Structures Using

Bonded Piezoelectrics for Vibration Control,” Proceedings of the ISMA25 International Conference on Noise and Vibration Engineering, Leuven, Belgium, 13-15 September 2000, Vol. 1, pp. 95-102.

459. Liu, Y., R. K. Kapania, F. H. Gern, and D. J. Inman, 2000. “Equivalent Plate Modeling of Arbitrary

Planform Wings,” in Advances in Computational Engineering and Sciences, S. N. Atluri and F. W. Brust, eds., pp. 515-521 (Proceedings of the International Conference on Computational Engineering and Sciences, ICES 2000, Los Angeles, CA, August 21-25, 2000).

460. Austin, E. M., and Inman, D. J., 2000. “Errors in Damping Predictions due to Kinematics Assumptions for

Sandwich Beams,” Proceedings of the Seventh International Conference on Recent Advances in Structural Dynamics Conference, Southampton, England, 24-27 July 2000.

461. Kim, Myung-Hyun, and Inman, Daniel J., 2000. “Spillover Reduction in the Vibration–Control of Flexible

Structures Using Sliding Mode Observer,” Proceedings of the Eighth Conference on Nonlinear Vibration, Stability, and Dynamics of Structures, Blacksburg, Virginia, 23-27 July 2000.

462. Inman, Daniel J., and Hegewald, Thomas, 2000. “Suppressing Plate Vibrations with Smart Materials,”

Proceedings of the Seventh International Congress on Sound and Vibration, Garmisch-Partenkirchen Congress Center, Germany, 4-7 July 2000.

Daniel J. Inman ()

463. Friswell, M. I., and Inman, D. J., 2000. “Sensor Validation for Smart Structures,” Proceedings of the EOS/SPIE’s Symposium on Applied Photonics, Glasgow, Scotland, United Kingdom, 22-24 May 2000.

464. Briand, G., Wicks, A. L., and Inman, D. J., 2000. “Vibration Testing for Control of Inflated Objects,”

Proceedings of the SECTAM-XX, Callaway Gardens, Pine Mountain, Georgia, 16-18 April 2000, pp. 57-62.

465. Rusovici, R., Lesieutre, G. A., and Inman, D. J., 2000. “Modeling of Shock Propagation and Attenuation in Viscoelastic Materials,” Proceedings of the 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, George, 3-4 April 2000 (selected as the AIAA SDM2000 best paper).

466. Lopes, Jr. V., Pereira, J. A., and Inman, D. J., 2000. “Structural FRF Acquisition via Electric Impedance

Measurement Applied to Damage Location,” Proceedings of the 18th International Modal Analysis Conference and Exposition, San Antonio, Texas, 7-10 February 2000, pp. 1549-1555.

467. Lopes, Jr. V., Park, G., Cudney, H., and Inman, D. J., 2000. “Structural Integrity Identification Based on

Smart Materials and Neural Network,” Proceedings of the 18th International Modal Analysis Conference and Exposition, San Antonio, Texas, 7-10 February 2000, pp. 510-515.

468. Carneiro, S. H. S. and Inman, D. J., 2000. “A Continuous Mathematical Model of Cracked Timoshenko

Beams for Damage Detection,” Proceedings of the 18th International Modal Analysis Conference and Exposition, San Antonio, Texas, 7-10 February 2000, pp. 194-200.

469. Friswell, M. I. and Inman, D. J., 2000. “Sensor Validation for Smart Structures,” Proceedings of the 18th

International Modal Analysis Conference and Exposition, San Antonio, Texas, 7-10 February 2000, pp. 483-489.

470. Kim, M. H. and Inman, D. J., 2000. “Slewing Motion Control of an Active Flexible Structure Using Sliding

Modes,” Proceedings of the 18th International Modal Analysis Conference and Exposition, San Antonio, Texas, 7-10 February 2000, pp. 147-152.

471. Ram, Y. M. and Inman, D. J., 1999. “Optimal Control for Smart Structures,” Proceedings of the 10th

International Conference on Adaptive Structures and Technologies, Paris, France, 11-13 October 1999, pp. 291-296.

472. Agnes, G. S., Inman, D. J., Rogers, J. R., Williams, R. B., and Briand, G., 1999. “Smart Structures and

Inflatable Satellite Components,” Proceedings of the 10th International Conference on Adaptive Structures and Technologies, Paris, France, 11-13 October 1999, pp. 157-162.

473. Inman, D. J. and Agnes, G. S., 1999. “Smart Structures for Vibration Suppression of Optical Surfaces,”

Proceedings of the AFOSR Structural Mechanics Workshop, Wright Patterson AFB, Ohio, 27-29 September 1999, pp. 69-74.

474. Inman, D. J., Robertshaw, H. H., Kapania, R. K., and Gern, F. H., 1999. “Distributed Modeling and Control

of Adaptive Wings,” Proceedings of the AFOSR Structural Mechanics Workshop, Wright Patterson AFB, Ohio, 27-29 September 1999, pp. 75-80.

475. Kim, M. H. and Inman, D. J., 1999. “An On-Line Adaptive and Neural Network Control of Underwater

Vehicles,” Proceedings of the SPIE’s International Symposium on Intelligent Systems and Advanced Manufacturing, Boston, Massachusettes, 19-22 September 1999.

476. Moreira, F. J. O., Arruda, J. R., and Inman, D. J., 1999. “Design of Reduced Order H¥ Controller for Smart

Structures,” Proceedings of the 17th DETC Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, 12-15 September 1999.

Daniel J. Inman ()

477. Park, G., Cudney, H., Inman, D. J., 1999. “Impedance-Based Structural Health Monitoring Technique for Civil Structures,” Proceedings of the 2nd International Workshop on Structural Health Monitoring, Stanford, California, 8-10 September 1999, pp. 523-532.

478. Lopes, Jr., V., Park, G., Cudney, H., Inman, D. J., 1999. “Structural Health Monitoring Technique Using

Artificial Neural Network and Structural Impedance Sensors,” Proceedings of the 2nd International Workshop on Structural Health Monitoring, Stanford, California, 8-10 September 1999, pp. 976-985.

479. Steffen, Jr., Valder and Inman, D. J., 1999. “Using Piezoceramic Materials for Vibration Damping in

Mechanical Systems,” Proceedings of the 5th ARO Workshop on Smart Structures, Pennsylvania State University, 15-18 August 1999.

480. Lopes, Jr., V., and Inman, D. J., 1999. “Active Damage Detection Using Smart Materials,” Proceeding of

EuroDiName ’99 Dynamic Problems in Mechanics and Mechatronics, Gunzburg, Germany, 11-16 July 1999, pp. 153-158.

481. Cole, D. G., Perray, N. R., and Inman, D. J., 1999. “Theoretical and Experimental Modal Analysis of

Piezostructures,” Proceedings of the Sixth International Congress on Sound and Vibration, Copenhagen, Denmark, 5-8 July 1999, pp. 2541-2548.

482. Lopes, Jr., V., Park, G., Cudney, H., Inman, D. J., 1999. “Integrated Structural Health Monitoring

Approach Using Artificial Neural Network with Structural Impedance Sensors,” Proceedings of 1999 ASME Mechanics and Materials Conference, Blacksburg, Virginia, 27-30 June 1999.

483. Kim, M. H. and Inman, D. J., 1999. “Output Feedback Control of Underwater Vehicles Using Nonlinear

State Observer,” Proceedings of 1999 ASME Mechanics and Materials Conference, Blacksburg, Virginia, 27-30 June 1999.

484. Austin, E. M. and Inman, D. J., 1999. “Some Influences of Higher Order Modeling in Damping Design,”

Proceedings of the 1999 ASME Mechanics and Materials Conference, Blacksburg, Virginia, 27-30 June 1999.

485. Pokines, B., Tani, J., Esashi, M., Hamano, T., Mizuno, K., and Inman, D. J., 1999. “Active Material

Micro-Actuator Arrays Fabricated With SU-8 Resin,” Proceedings of the Workshop and Exhibition on High-Aspect Ratio Microstructure Technology (HARMST'99), Kisarazu, Chiba, Japan, 13-15 June 1999.

486. Cattarius, J., Preidikman, S., Mook, D. T., and Inman, D. J., 1999. “Vortex-Lattice Method to Analyze

Aerodynamic Interference of Wing/Pylon/Store Configurations of an F16 Wing,” Proceedings of CEAS/AIAA/ICASE/NASA Langley International Forum on Aeroelasticity and Structural Dynamics, Vol. PT2 of CP-1999-209136, pp. 443-455, June 1999.

487. Inman, D. J., 1999. “Vibration, Modal Control, and Smart Structures,” Proceedings of the International

Conference on Vibration, Noise and Structural Dynamics '99, Venice, Italy (Keynote Address), 28-30 April 1999, pp. 11-22.

488. Inman, D. J., 1999. “Multifunctional Structures for the Next Millennium,” Proceedings of the SD2000, Los

Alamos, New Mexico, 12-16 April 1999.

489. Park, G., Cudney, H. H. and Inman, D. J., 1999. “Developing a Modal Analysis-Based Health Monitoring Technique Using Structural Impedance Sensors,” Proceedings of the 2nd International Conference on Identification in Engineering Systems, University of Wales Swansea, United Kingdom, 29-31 March 1999, pp. 506-515.

490. Austin, E.M. and Inman, D. J., 1999. “Effects of Modeling Assumptions on Loss Factors Predicted for

Viscoelastic Sandwich Beams,” Proceedings of the SPIE's 6th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, 1-5 March 1999, Vol. 3672, pp. 251-262.

Daniel J. Inman ()

491. Pilkey, D. F., Park, G. and Inman, D. J., 1999. “Damping Matrix Identification and Experimental

Verification,” Proceedings of the SPIE's 6th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, 1-5 March 1999, Vol. 3672, pp. 350-357.

492. Park, G., Cudney, H., and Inman, D. J., 1999. “Impedance-Based Health Monitoring Technique for

Massive Structures and High-Temperature Structures,” Proceedings of the SPIE's 6th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, 1-5 March 1999, Vol. 3670, pp. 461-469.

493. Inman, D. J. and Park, C. H., 1999. “A Uniform Model for Series R-L and Parallel R-L Shunt Circuits and

Power Consumption,” Proceedings of the SPIE's 6th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, 1-5 March 1999, Vol. 3668, pp. 797-804.

494. Friswell, M. I. and Inman, D. J., 1999. “Finite Element Models with Viscoelastic Damping,” Proceedings

of the 17th International Modal Analysis Conference, Kissimmee, Florida, 8-11 February 1999, pp. 181-187.

495. Park, C. H., Kabeya, K. and Inman, D. J., 1998. “Enhanced Piezoelectric Shunt Design,” Adaptive

Structures and Material Systems, Proceedings of the ASME International Mechanical Engineering Congress, Anaheim, California, 16-20 November 1998; J. Sirkis and G. Washington, Eds., ASME, New York, pp. 149-155.

496. Park, C. H., Mulford, M. and Inman, D. J., 1998. “A Comparison of Passive Electronic and Mechanical

Damping Treatments,” Proceedings of the Ninth International Conference on Adaptive Structures and Technologies, Cambridge, Massachusetts, 14-16 October, 1998, Technomic Publishing Co., Inc., pp. 94-104.

497. Raju, V., Park, G. and Cudney, H., 1998. “Impedance-Based Health Monitoring Technique of Composite

Reinforced Structure,” Proceedings of the Ninth International Conference on Adaptive Structures and Technologies, Cambridge, Massachusetts, 14-16 October 1998, pp. 448-457.

498. Lam, M. J., Inman, D. J. and Friswell, M. I., 1998. “Improved Models for Smart Structures with

Viscoelastic Elements,” Proceedings of the 4th ESSM and 2nd MIMR Conference, Harrogate, United Kingdom, 6-8 July 1998, pp. 659-666.

499. Friswell, M. I. and Inman, D. J., 1998. “Hybrid Damping Treatments in Thermal Environments,”

Proceedings of the 4th ESSM and 2nd MIMR Conference, Harrogate, United Kingdom, 6-8 July 1998, pp. 667-674.

500. Johnson, D. , Brown, G.V., Inman, D. J., 1998. “Adaptive Variable Bias Magnetic Bearing Control,”

Proceedings, 1998 American Control Conference, June 24-26, 1998.

501. Inman, D. J., 1998. “Theoretical Models for Modal Analysis,” Proceedings from NATO Advanced Study Institute: Modal Testing and Analysis, May 1998, pp. 231-245 (Invited).

502. Inman, D. J. and Park, C. H., 1998. “Damping: An Introduction to Viscoelastic Models,” Proceedings

from NATO Advanced Study Institute: Modal Testing and Analysis, May 1998, pp. 459-473 (Invited).

503. Park, G., Kabeya, K., Cudney, H. H., and Inman, D. J., 1998. “Removing Effects of Temperature Changes from Piezoelectric Impedance-Based Qualitative Health Monitoring,” Proceedings of the 5th Annual International Symposium on Smart Structures-Sensory Phenomena and Measurement Instrumentation Processing, 2-4 March, 1998, R. O. Claus, Ed., SPIE Vol. 3330, pp. 103-114.

Daniel J. Inman ()

504. Sciulli, D. and Inman, D. J., 1998. “Isolation Design for Systems with Flexible Base and Equipment,” Passive Damping and Isolation Proceedings-5th International Symposium on Smart Structures and Materials, March 1998, L. P. Davis, Ed., SPIE Vol. 3327.

505. Austin, E. M. and Inman, D. J., 1998. “Modeling of Sandwich Structures,” Passive Damping and Isolation

Proceedings-5th International Symposium on Smart Structures and Materials, March 1998, L. P. Davis, Ed., SPIE Vol. 3327.

506. Lam, M. J., Inman, D. J. and Saunders, W. R., 1998. “Variations of Hybrid Damping,” Passive Damping

and Isolation Proceedings-5th International Symposium on Smart Structures and Materials, March 1998, L. P. Davis, Ed., SPIE Vol. 3327.

507. Pilkey, D. F. and Inman, D. J., 1998. “A Survey of Damping Matrix Identification,” Proceedings of the 16th

International Modal Analysis Conference, Santa Barbara, California, 3-5 February 1998, SEM, Inc., pp. 104-110.

508. Inman, D. J., 1997. “Intelligent Material Systems,” NASA New Millenium Program, October 1997, web

posting.

509. Sciulli, D. and Inman, D. J., 1997. “Active Isolation Design for a Flexible Base,” Proceeding of the 1997 ASME Design Technical Conference, September 1997, Paper No. DETC97/VIB-4117.

510. Starek, L., Musil, M. and Inman, D. J., 1997. “Updating of a Nonconservative System Using Inverse

Methods,” Proceedings of the 1997 ASME Design Technical Conference, September 1997, paper No. DETC97/VIB-4158.

511. Pilkey, D. F., Roe, K. P. and Inman, D. J., 1997. “Computational Issues in Damping Identification for

Large Scale Problems,” Proceedings of the 1997 ASME Design Technical Conference, September 1997, paper No. DETC97/VIB-3835.

512. Austin, E. M. and Inman, D. J., 1997. “On Modeling Layered Media For Damping Treatments,”

Proceedings of the Eleventh VPI&SU Symposium on Structural Dynamics and Control, Blacksburg, Virginia, May 1997.

513. Pokines, B. J. and Inman, D. J., 1997. “A Substructure Method to Formulate Vibration Isolation Feedback

Terms and MEMS Active Control and Vibration Suppression Issues,” Proceedings of the Eleventh VPI&SU Symposium on Structural Dynamics and Control, Blacksburg, Virginia, May 1997.

514. Agnes, G. S. and Inman, D. J., 1997. “Vibration Suppression of Nonlinear Single Degree of Freedom

System via Second-Order Nonlinear Compensation,” Proceedings of the 38th AIAA SDM Meeting, April 1997.

515. Pilkey, D. F. and Inman, D. J., 1997. “An Iterative Approach to Viscous Damping Matrix Identification,”

Proceedings of the 15th International Modal Analysis Conference, Orlando, Florida, 3-6 February 1997, SEM, Inc., pp. 1152-1157.

516. Atalla, M. J. and Inman, D. J., 1997. “A Model Updating Method Suitable for Adaptive Control

Applications,” Proceedings of PACAM 5, January 1997.

517. Lam, M. J., Saunders, W. R. and Inman, D. J., 1997. “Vibration Control through Passive Constrained Layer Damping and Active Control,” Proceedings of the SPIE 4th Annual Symposium on Smart Structures and Materials-Passive Damping and Isolation, 1997, L. P. Davis, Ed., Paper No. 3045-11.

518. Austin, E. M. and Inman, D. J., 1997. “Studies on the Kinematics Assumption for Sandwich Beams,”

Proceedings of the SPIE 4th Annual Symposium on Smart Structures and Materials-Passive Damping and Isolation, 1997, L. P. Davis, Ed., Paper No. 3045-21.

Daniel J. Inman ()

519. Friswell, M. J. and Inman, D. J., 1997. “Sensor and Actuator Topology for Vibration Control and

Parameter Estimation,” Proceedings of the SPIE 4th Annual Symposium on Smart Structures and Materials-Mathematical Modeling and Control, 1997, V. J. Varadan, Ed., Paper No. 3039-79.

520. Inman, D. J., 1997. “Store Induced Flutter Suppression,” Proceedings of the 1997 AFOSR/ARO Structural

Mechanics Workshop, 1997, pp. 40-44.

521. Inman, D. J. and Lam, M. J., 1997. “Active Constrained Layer Damping Treatments,” Proceedings of the 5th Recent Advances in Structural Dynamics, 1997, pg. 1-20.

522. Inman, D. J., 1997. “Vibration Suppression Through Smart Damping,” Proceedings of the 5th International

Conference on Sound and Vibration, 1997, Vol. 1, pp. 115-132 (Keynote).

523. Starek, L., Inman, D. J. and Musil, M., 1997. “Updating of Non-Conservative Structure via Inverse Methods with Parameter Subset Selection,” Proceedings of the 5th International Conference on Sound and Vibration, 1997, Vol. 3, pp. 1517-1526.

524. Gade, P. V. N. and Inman, D. J., 1996. “Uncertainty Models and Associated Trade-Offs for Wing/Store

Flutter Suppression,” SPIE Far East and Pacific Rim Smart Materials, Structures and MEMS Conference, Bangalore, India, December 1996, page 90.

525. Inman, D. J. and Leo, D. J., 1996. “Convex Controller Design for Wind Induced Vibration,” Third

International Colloquium on Bluff Body Aerodynamics and Applications, July 1996, pp. P29-P32.

526. M. J. Atalla and D. J. Inman, 1996. “Model Updating Using Neural Networks,” Second International Conference on Structural Dynamic Modeling: Test, Analysis and Correlation, DTA/NAFEMS, Cumbria, England, United Kingdom, July 1996, pp. 13-24.

527. Pokines, B. J., Garcia, E., Inman, D. J. and Okamoto, O., 1996. “Substructure Vibration Isolation for

Spacecraft,” Proceedings of the 20th International Symposium on Space Technology and Service, Gifu, Japan, 19-25 May 1996, Paper No. 96b-26.

528. Inman, D. J., Banks, H. T., Leo, D. J., and Wang, Y., 1996. “Identification of Damage Using Variational

Forms for Smart Structures,” Proceedings of the Identification in Engineering Systems Conference, March 1996, Eds., M. I. Friswell and J. E. Mottershead, pp. 18-27.

529. Agnes, G. S. and Inman, D. J., 1996. “Nonlinear Piezoelectric Vibration Absorbers,” Proceedings of the

SPIE, Smart Structures and Materials 1996 Passive Damping and Isolation, San Diego, California, 26-27 February 1996, Conor D. Johnson, Ed., pp. 247-258.

530. Leo, D. J. and Inman, D. J., 1996. “Optimal Control Design for Systems with Collocated Sensors and

Actuators,” Proceedings of the SPIE's 1996 Symposium on Smart Structures and Materials, February 1996, Vol. 2715 Mathematics and Control in Smart Structures, V. V. Varadan, Ed., pp. 183-195.

531. Austin, E. M., Inman, D. J. and Huang, S. C., 1996. “Design Considerations for Active Constrained Layer

Damping Treatments,” Proceedings of the SPIE's 1996 Symposium on Smart Structures and Materials, February 1996, Vol. 2716, Mathematics and Control in Smart Structures, V. V. Varadan, Ed., pp. 244-255.

532. Agnes, G. S. and Inman, D. J., 1996. “Nonlinear Piezoelectric Vibration Absorbers,” Proceedings of the

SPIE's 1996 Symposium on Smart Structures and Materials, February 1996, Vol. 2720, Passive Damping and Isolation, C. D. Johnson, Ed., pp. 247-258.

533. Sciulli, D. and Inman, D. J., 1996. “Comparison of Single-Degree-of-Freedom Model and Two-Degree-of-

Freedom Model for Use in Vibration Isolation,” Proceedings of the SPIE's 1996 Symposium on Smart

Daniel J. Inman ()

Structures and Materials, February 1996, Vol. 2720, Passive Damping and Isolation, C. D. Johnson, Ed., pp. 293-304.

534. Pokines, B. J., Inman, D. J., and Garcia, E., 1996. “Substructure Synthesis Method Applied to Vibration

Isolation Systems,” Proceedings of the SPIE's 1996 Symposium on Smart Structures and Materials, San Diego, California, February 1996, Vol. 2720, Passive Damping and Isolation, C. D. Johnson, Ed., pp. 317-325.

535. Huang, S-C., Inman, D. J., and Austin, E. M., 1996. “Smart Viscoelastic Damping Treatment,”

Proceedings of the 14th International Model Analysis Conference, February 1996, Vol. I, pp. 39-43.

536. Gade, P. V. N. and Inman, D. J., 1996. “H¥ Controller Design for Wing/Store Flutter Suppression,” ASME 1996 International Mechanical Engineering Congress and Exposition, 1996, ASME DE-VOL 193 Active Control of Vibration and Noise, pp. 91-99.

537. Inman, D. J., Rietz, R. W. and Wetherhold, R. C., 1996. “Control of Thermally Induced Vibrations Using

Smart Structures,” Dynamics and Control of Structures in Space III, C. L. Kirk and, D. J. Inman, Eds., pp. 3-16.

538. Gade, P. V. N. and Inman, D. J., 1996. “Controller Design for Wing/Store Flutter Suppression of an Airfoil

in Incompressible Flow,” American Institute of Aeronautics and Astronautics, AIAA-96-1633, pp. 221-229.

539. Atalla, M. J. and Inman, D. J., 1996. “On Model Updating Using Neural Networks,” American Institute of

Aeronautics and Astronautics, AIAA-96-1269-CP, pp. 23-31.

540. Inman, D. J., 1995. “Programmable Structures for Vibration Suppression,” Proceedings of the International Conference on Structural Dynamics, Vibration, Noise and Control, December 1995, pp. 100-107.

541. Inman, D. J., Huang, S.-C. and Austin, E. M., 1995. “Piezoceramic Versus Viscoelastic Damping

Treatments,” Proceedings of the 6th International Conference on Adaptive Structure Technology, November 1995, pp. 241-252.

542. Pokines, B., Inman, D., and Garcia, E., 1995. “Vibration Isolation through the Uncoupling of

Substructures,” Proceedings of the Society of Engineering Science 32nd Annual Technical Meeting, New Orleans, Louisiana, 29 October 1995, p. 443.

543. Inman, D. J., 1995. “Application of Smart Structures for Vibration Suppression,” Proceedings of the

International Forum on Aeroelasticity and Structural Dynamics, The Royal Astronautical Society, Vol. 1, June 1995, pp. 2.1-2.11.

544. Lam, M. J., Saunders, W. R., and Inman, D. J., 1995. “Modeling Active Constrained - Layer Damping

Using Finite Element Analysis and GHM Damping Approach,” North American Conference on Smart Structures and Materials, March 1995, Passive Damping, Eds., Johnson, C. D. and Rogers, L. C., pp. 86-97.

545. Lallament, G. and Inman, D. J., 1995. “A Tutorial on Complex Eigenvalues,” Proceedings of the 13th

International Modal Analysis Conference, February 1995, pp. 490-495.

546. Inman, D. J., 1995. “Structural Control by Eigenstructure Assignment Using Inverse Methods,” Proceedings of the 10th VPI&SU Symposium on Structural Dynamics, 1995, pp. 157-170.

547. Starek, L., Inman, D. J., and Pilkey, D. F., 1995. “A Symmetric Positive Definite Inverse Vibration

Problem with Underdamped Modes,” 15th Biennial Vibration and Noise Conference, 1995, ASME, Vol. 3, part C, pp. 1089-1094.

Daniel J. Inman ()

548. Leo, D. J. and Inman, D. J., 1994. “Optimal Collocated Control of a Smart Antenna,” Proceedings of the

33rd IEEE Conference on Decision and Control, December 1994, pp. 109-114.

549. Van Nostrand, W.C. and Inman, D. J., 1994. “Finite Element Model for Active Constrained Layer Damping,” Proceedings of the 31st Society of Engineering Science Meeting, October 1994, SPIE Vol. 2427 Active Materials and Smart Structures, G. L. Anderson and D. C. Lagoudas, Eds., pp. 124-139.

550. Inman, D. J., 1994. “Vibration Suppression via Eigenstructure Assignment and Inverse Methods,” The

Active Control of Vibration, C. R. Burrows and P. S. Keogh (IUTAM), Eds., IME, United Kingdom, September 1994, pp. 25-32.

551. Parker, G. G., Seagleman, D. J., and Inman, D. J., 1994. “Decentralized Sliding Mode Control of

Nonlinear Flexible Robots,” Proceedings of the Second International Conference on Motion and Vibration Control, September 1994, Yoshida and Nomani, Eds., pp. 156-162.

552. Starek, L. and Inman, D. J., 1994. “A Symmetric Positive Definite Inverse Vibration Problem,”

Proceedings of the International Conference on Vibration Engineering, July 1994, International Academic Publication, pp. 145-150.

553. Ben-Haim, Y. and Inman, D. J., 1994. “Vibration Control with Unknown Disturbances Represented by

Convex Models of Uncertainty,” Proceedings of the 5th International Conference on Recent Advances in Structural Dynamics, July 1994.

554. Leo, D. J. and Inman D. J., 1994. “Convex Controller Design for Vibration Suppression of a Flexible

Antenna,” Proceedings of the 2nd International Conference on Intelligent Materials, C. R. Rogers, G. G. Wallace, Eds., Technomic Publishing Co., Inc., Lancaster, PA, pp. 816-827.

555. Saunders, W. R., Inman, D. J., and Robertshaw, H. H., 1994. “Pole Zero Modeling for Smart Viscoelastic

Structures,” Proceedings of the 2nd International Conference on Intelligent Materials, C. R. Rogers, G. G. Wallace, Eds., Technomic Publishing Co., Inc., Lancaster, PA, pp. 1044-1054.

556. Leo, D. J. and Inman, D. J., 1994. “Linear Controller Design for Structures with Uncertain Transient

Disturbances,” Proceedings of the 1994 AIAA Dynamics Specialists Conference, pp. 200-210.

557. Slater, J. C. and Inman, D. J., 1994. “Extension of Modal Analysis to Nonlinear Systems,” Proceedings of the 12th International Conference on Modal Analysis, pp. 1684-1692.

558. Pokines, B., Holcomb, M. D., Inman, D. J., and Belvin, W. K., 1994. “Active Isolation Devices,” 1994

North American Conference on Smart Structures and Materials, Smart Structures and Intelligent Systems. N. W. Hagood, Ed., Vol. 2190, pp. 772-781.

559. Inman, D. J. and Calamita, J. P., 1994. “Modal Estimation for the Physical Parameters of a Programmable

Structure,” 1994 North American Conference on Smart Structures and Materials, Mathematics and Control in Smart Structures, H. T. Banks, Ed., Vol. 2192, pp. 190-199.

560. Van Nostrand, W. C., Knowles, G. J., and Inman, D. J., 1994. “Finite Element Models for Active

Constrained Layer Damping,” 1994 North American Conference on Smart Structures and Materials, Passive Damping, C. R. Johnson, Ed., Vol. 2193, pp. 126-137.

561. Holcomb, M. D., Inman, D. J., and Pokines, B. J., 1994. “Active Vibration Isolation Device,” 1994 North

American Conference on Smart Structures and Materials, Passive Damping, C. R. Johnson, Eds., Vol. 2193, pp. 325-335.

Daniel J. Inman ()

562. Wada, B. and Inman, D. J., 1993. “Interdisciplinary Approaches,” Proceedings of the International Workshop on Structural Control, December 1993, G. W. Housner and S. F. Masri, Eds., USC Publication CE9311, pp. 521-535.

563. Wada, B., Yoshida, K., Friend, B., and Inman, D. J., 1993. “Report on Working Group A5:

Interdisciplinary Approaches,” Proceedings of the Workshop on Structural Control, December 1993, G. W. Housner and S. F. Masri, Eds., pp. 521-535.

564. Dosch, J., Leo, D. J., and Inman, D. J., 1993. “Modeling and Control for Vibration Suppression of a

Flexible Smart Structure,” in Dynamics and Control Structures in Space II, September 1993, Kirk, C.L. and Hughes, P. C., Eds., pp. 603-618.

565. Van Norstrand, W. C., Knowles, G. J., and Inman, D. J., 1993. “Active Constrained Layer Damping for

Micro-Satellites,” in Dynamics and Control of Structures in Space II, September 1993, Kirk, C. L. and Hughes, P. C., Eds., pp. 667-681.

566. Crassidis, J. L., Leo, D. J., Mook, D. J., and Inman, D. J., 1993. “Robust Identification and Control of a

Flexible Structure,” Proceedings of the Guidance Navigation and Control Conference, August 1993.

567. Inman, D. J., 1993. “Model Correction Using Frequency Data,” International Conference on Structural Dynamics Modeling, Test, Analysis and Correlation, July 1993, NAFEMS, pp. 349-358.

568. Slater, J. C., and Inman, D. J., 1993. “Forced Response of Nonlinear Systems for Modal Control,” ASME

Applied Mechanics Summer Meeting, Recent Developments in Stability, Vibration and Control of Structural Systems, June 1993, A. Guran, Ed., ASME AMD Vol. 167.

569. Leo, D. J., Crassidis, J. L., Inman, D. J., and Mook, D. J., 1993. “Experimental Study of Structural

Uncertainties in an H 1 Design,” Ninth VPI&SU Symposium on Dynamics and Control of Large Structures, May 1993, pp. 469-480.

570. Leo, D. J. and Inman, D. J., 1993. “Control System Design for a Smart Slewing Frame,” Proceedings of

the Second Conference on Recent Advances in Active Control of Sound and Vibration,” April 1993, pp. 717-728.

571. Leo, D. J. and Inman, D. J., 1993. “Active Control of a Slewing Frame Using Smart Structures,”

Conference on Modern Practice in Stress and Vibration Analysis, April 1993, J. L. Wearing, Ed., Shefield Academic Press, pp. 203-214.

572. Dosch, J. J., Calamita, J. P., and Inman, D. J., 1993. “Performance of a Programmable Structure,”

Proceedings of the 1993 SPIE Conference on Smart Structures and Materials Mathematics in Smart Structures, February 1993, H. T. Banks, Ed., Vol. 1919, pp. 151-156.

573. Schulz, M. J. and Inman, D. J., 1993. “Model Correction Using Constrained Eigenstructure Assignment,”

Proceedings of the 11th International Modal Analysis Conference, February 1993, pp. 941-948.

574. Slater, J. C., Inman, D. J., and Belvin, W. K., 1993. “A Survey of Modern Methods for Modeling Frequency Dependent Damping in Finite Element Models,” Proceedings of the 11th International Modal Analysis Conference, February 1993, pp. 1508-1512.

575. Dosch, J. J., Leo, D. J., and Inman, D. J., 1993. “Modeling of a Smart Antenna for Active Vibration

Suppression,” Proceedings of the 11th International Modal Analysis Conference, February 1993, pp. 1418-1424.

576. Lam, M., Inman, D. J., and Kress, A., 1993. “Symmetric Model Correction of Mechanical Systems,” in

Vibration, Shock, Damage and Identification of Mechanical Systems, 1993, D. Garne, et al. Eds., ASME DE-Vol-16, pp. 65-72.

Daniel J. Inman ()

577. Segalman, D. J., Parker, G. G., and Inman, D. J., 1993. “Vibration Suppression by Modulation of Elastic

Modulus Using Shape Memory Alloy,” in Intelligent Structures, Materials and Vibration, 1993, Shahinpoor, M. and Tzou, H. S., Eds., ASME Vol. 58, pp. 1-5.

578. Rietz, R. W. and Inman, D. J., 1993. “Comparison of Linear and Nonlinear Control on a Distributed

Parameter System,” in Vibration and Control of Mechanical Systems, 1993, Tan, C. A., Bergman, L. A. and Yang, B., Eds., ASME Vol. 61, pp. 43-50.

579. Banks, H. T., Wang, Y., Inman, D. J., and Slater, J. C., 1992. “Variable Coefficient Distributed Parameter

System Models for Structures with Piezoceramic Actuators and Sensors,” Proceedings of the 31st IEEE Conference on Decision and Control, December 1992, pp. 1803-1808.

580. Dosch, J. J., Leo, D. J., and Inman, D. J., 1992. “Comparison of Vibration Control Schemes for a Smart

Antenna,” Proceedings of the 31st IEEE Conference on Decision and Control, December 1992, pp. 1815-1820.

581. Leo, D. J. and Inman, D. J., 1992. “Control of a Flexible Frame in Slewing,” Proceedings of the American

Control Conference, June 1992, pp. 2535-2539.

582. Leo, D. J. and Inman, D. J., 1992. “Smart Slewing Frames,” Proceedings of the First European Conference on Smart Structures, May 1992.

583. Pokines, B., Belvin, W. K., and Inman, D. J., 1992. “A Variable Stiffness Strut Using Strain Induced

Bending for Vibration Suppression in the Evolutionary Model,” Proceedings of the 33rd AIAA SDM Conference, April 1992.

584. Pokines, B., Belvin, W. K., and Inman, D. J., 1992. “Static and Dynamic Characteristics of Piezoceramic

Strut,” Proceedings of the 5th NASA/DOD Controls/Structure Interaction Technology Conference, March 1992.

585. Slater, J. C., Belvin, W. K., and Inman, D. J., 1992. “A Comparison of Viscoelastic Damping Models,”

Proceedings of the 5th NASA/DOD Controls/Structure Interaction Technology Conference, March 1992, pp. 251-262.

586. Starek, L. and Inman, D. J., 1992. “Solution of the Model Correction Problem via Inverse Methods,”

Proceedings of the 10th International Modal Analysis Conference, San Diego, CA, Feb. 3-7, 2992, SEM Inc., Bethel, CT, Vol. II, p. 1004.

587. Inman, D. J., 1992. “Introduction to Matrices in Modal Analysis,” Proceedings of the 10th International

Modal Analysis Conference, San Diego, CA, Feb. 3-7, 2992, SEM Inc., Bethel, CT, Vol. I, p. 595.

588. Garcia, E., Dosch, J., and Inman, D. J., 1991. “The Application of Smart Structures to the Vibration Suppression Problem,” Proceedings of the Second Joint Japan-US Conference on Adaptive Structures, November 1991.

589. Dosch, J. J., Inman, D. J., and Garcia, E., 1991. “Measurement of Strain and Stress in Piezoelectric

Actuator for Collocated Control,” Proceedings Active Materials and Adoptive Structures, November 1991, G. Knowles, Ed., pp. 195-198.

590. Johnson, D., Brown, G. V. and Inman, D. J., 1991. “Force Analysis of Magnetic Bearings,” International

Symposium on Magnetic Suspension Technology, 19-23 August 1991, NASA Conference Publication, Number 3152, Part II, pp. 595-665.

591. Inman, D. J., 1991. “Estimation, Model Correction and Inverse Problems,” Proceedings of the 13th IMAC

World Congress on Computation and Applied Mathematics, Dublin, Ireland, July 1991.

Daniel J. Inman ()

592. Inman, D. J. and Garcia, E., 1991. “Smart Structures for Vibration Suppression,” Proceedings of the 4th

International Conference on Recent Advances in Structural Dynamics, Southampton, United Kingdom, July 1991, pp. 139-155.

593. Yae, K. H. and Inman, D. J., 1991. “Control Oriented Order Reduction of Finite Element Models,”

Proceedings of the 1991 Joint Automatic Control Conference, May 1991, pp. 2187-2189.

594. Umland, J. W., Inman, D. J., and Banks, H. T., 1991. “Damping in Coupled Rotation and Bending - an Experiment,” Proceedings of the 1991 Joint Automatic Control Conference, (Invited) May 1991, Vol. III, pp. 2994-2999.

595. Garcia, E., Dosch, J., and Inman, D. J., 1991. “Feedback Control of an Active Antenna Structure,”

Proceedings of the 8th VPI&SU Symposium on Dynamics and Control of Large Structures, May 1991, pp. 291-298.

596. Slater, J. C. and Inman, D. J., 1991. “Transfer Function Modeling of Damped Mechanisms in Viscoelastic

Plates,” Proceedings of the 32nd AIAA Structures, Structural Dynamics and Material Conference, April 1991, Part 3, pp. 2381-2383.

597. Garcia, E., Dosch, J., and Inman, D. J., 1991. “Vibration Attenuation in an Active Antenna Structure,”

Proceedings of the Recent Advances in Active Control of Sound and Vibration, April 1991, pp. 535-542.

598. Johnson, D., Inman, D. J., and Horner, G. C., 1991. “An Active Suspension system for Space Structure Dynamic Testing,” Proceedings of the Recent Advances in Active Control of Sound and Vibration, April 1991, pp. 567-578.

599. Starek, L. and Inman, D. J., 1991. “Solution of the Model Correction Problem Via Inverse Methods,”

Proceedings of the 9th International Modal Analysis Conference, April 1991, pp. 352-355.

600. Inman, D. J., 1991. “Introduction to Matrices in Modal Analysis,” Proceedings of the 9th International Modal Analysis Conference, April 1991, pp. 1410-1414.

601. Slater, J. C., Inman, D. J., and Belvin, W. K., 1991. “Modeling of Constrained Layer Damping in Trusses,”

Proceedings of Damping ‘91, February 1991, pp. ECC1-ECC8.

602. Inman, D. J., Garcia, E. and Dosch, J., 1991. “Vibration Suppression Using Smart Structures,” ASME, Smart Structures and Materials, Haritos, G. K. and Srinivasan, A. V., Eds., AMD, Vol. 123, pp. 167-172.

603. Starek, L. and Inman, D. J., 1991. “Inverse Problems in Vibration Generating Symmetric Coefficient

Matrices,” ASME, Vibration Analysis Analytical and Computational, Haug et al., Eds., DE-Vol. 37, pp. 13-18.

604. Inman, D. J. and Garcia, E., 1991. “Vibration Suppression Using Smart Structures,” ASME Winter Annual

Meeting, (Invited), Smart Structures and Materials, Haritos, G. K., and Srinivassan, A. V., Eds., AMD Vol. 123, ASME, pp. 167-172.

605. Inman, D. J., Garcia, E. and Pokines, B., 1990. “Vibration Suppression and Slewing Control of a Flexible

Structure,” Proceedings of the 4th NASA Workshop on Computation Control of Flexible Aerospace Systems, July 1990, Part II, pp. 663-672.

606. Umland, J. and Inman, D. J., 1990. “Candidate Proof Mass Actuator Control Laws for the Vibration

Suppression of a Frame,” Proceedings of the 4th NASA Workshop on Computation Control of Flexible Aerospace Systems, July 1990, Part II, pp. 673-690.

Daniel J. Inman ()

607. Garcia, E., and Inman, D. J., 1990. “Modeling of Actuator-Structure Interaction in the Slewing of a Flexible Structure,” Proceedings of the 1990 American Controls Conference, San Diego, California, 23-25 May 1990, Vol. 2, pp. 1962-1967.

608. Inman, D. J., 1990. “Control/Structure Interaction: Effects of Actuator Dynamics,” AIAA 1990-Dynamics

Specialist Conference, (Invited) April 1990.

609. Minas, C. and Inman, D. J., 1990. “Identification of the Damping Matrix from Incomplete Modal Testing Results,” AIAA 1990-Dynamics Specialist Conference, (Invited) April 1990.

610. Inman, D. J., 1990. “Model Improvement by Using Substructure Model Test Results,” AIAA 1990-

Dynamics Specialist Conference, April 1990.

611. Inman, D. J., 1990. “On the Nature of the Interaction Between Structures and Actuators in Vibration Suppression,” Proceedings of the International Congress on Recent Developments in Air & Structure Borne Sound and Vibration, (Invited), March 1990.

612. Inman, D. J., 1990. “Updating Analytical Models with Experimental Data,” Proceedings of the 2nd

USAF/NASA Workshop on System Identification and Health Monitoring of Precision Space Structures, (Invited), March 1990.

613. Inman, D. J., Garcia, E., and Pokines, B., 1990. “Issues in Slewing an Active Structure,” Proceedings of the

US-Japan Workshop on Smart-Intelligent Materials and Systems, (Invited), March 1990, by Ahmad, Crowson, Rogers and Aizawa, Eds., pp. 199-210.

614. Minas, C. and Inman, D. J., 1990. “Experimental Verification of the Theoretically Estimated Rotational

Entries of Mode Shapes,” Proceedings of the 8th International Modal Analysis Conference, February 1990, pp. 62-66.

615. Garcia, E. and Inman, D. J., 1990. “Modeling and Tachometer Feedback in the Control of an Experimental

Single Link Flexible Manipulator,” Proceedings of the 8th International Modal Analysis Conference, February, 1990, pp. 735-740.

616. Minas, C. and Inman, D. J., 1990. “Model Improvement by Using Substructure Modal Testing Results,”

Proceedings of the 8th International Modal Analysis Conference, February 1990, pp. 1190-1194.

617. Garcia, E. and Inman, D. J., 1990. “Control Formulations for Vibration Suppression of Active Structures in Slewing Motions,” ASME 1990 Winter Annual Meeting, (Invited), Advances in Dynamic and Control of Flexible Spacecraft and Space Based Manipulators, 1990, Joshi, Alberts and Kakad, Eds., DSC Vol. 20- pp. 1-5.

618. Yae, K. H. and Inman, D. J., 1990. “Flexible-Body Dynamics Modeling with a Reduced-Order Model,”

ASME, Advances in Design Automation, Vol. II, Optimal Design and Mechanical Systems Analysis, B. Ravani, Ed., DE-Vol, 23-2, pp. 87-92.

619. Cudney, H. H., Inman, D. J., and Oshman, Y., 1990. “Distributed Structural Control Using Multi Layered

Piezoelectric Actuators,” Proceedings of the AIAA 31st Structures, Dynamics and Materials Conference, pp. 2257-2265.

620. Inman, D. J. and Umland, J.W., 1989. “Controlling Flexible Structures with Second Order Actuator

Dynamics,” Proceedings of the 3rd Annual Conference on Aerospace Computational Control, (Invited), 19 August 1989, pp. 879-890.

621. Minas, C., Garcia, E., and Inman, D. J., 1989. “Control of a Planar Truss Using Linear Proof Mass

Actuators,” Proceedings of the 3rd Annual NASA/NSF/DoD Computational Controls Conference, Oxnard, California, August 1989, pp. 434-445.

Daniel J. Inman ()

622. Cudney, H. H., Inman, D. J. and Oshman, Y., 1989. “Distributed Actuators for Structural Control,”

Proceedings of the American Control Conference, (Invited) June 1989, pp. 1189-1194.

623. Cudney, H. H. and Inman, D. J., 1989. “Distributed Structural Control Using Multilayered Piezoelectric Actuators,” 7th VPI&SU Symposium on Dynamics and Control of Large Structures, June 1989.

624. Inman, D. J. and Banks, H. T., 1989. “Identification of Coefficients in Distributed Parameter Using Modal

Methods,” Proceedings of the 5th IFAC Symposium on Control of Distributed Parameter Systems, June 1989, pp. 353-358.

625. Banks, H. T. and Inman, D. J., 1989. “Experimental Determination of Damping Mechanisms in a

Composite Beam,” Proceedings of Damping ‘89, June 1989, pp. GDC-1-GDC-11.

626. Garcia, E. and Inman, D. J., 1989. “Identification of System Parameters in a Slewing Control Experiment,” Proceedings of Damping ‘89, June 1989, pp. CBA-1-CBA-13.

627. Inman, D. J. and Horner, G. C., 1989. “A Survey of Damping in Control of Flexible Structures,”

Proceedings of Damping ‘89, June 1989, pp. HBA-1-HBA-5.

628. Inman, D. J. and Soom, A., 1989. “Vibration Control in Spacecraft,” Proceedings of Modern Practice in Stress and Vibration, (Invited), April 1989, University of Liverpool, Pergamon Press, pp. 11-16.

629. Liang, Z. and Inman, D. J., 1989. “A Tutorial on Matrix Inversion in Time Domain Modal Analysis,”

Proceedings of the 7th International Modal Analysis Conference, January 1989, pp. 324-330.

630. Cudney, H. H. and Inman, D. J., 1989. “Experimental Verification of Damping Mechanisms in a Composite Beam,” Proceedings of the 7th International Modal Analysis Conference, January 1989, pp. 704-710.

631. Minas, C. and Inman, D. J., 1989. “Model Improvement by Pole Placement Methods,” ASME, Vibration

Analysis—Techniques and Applications, 1989, T. S. Sankar, Ed., pp. 179-185.

632. Banks, H. T., Fabino, R. H., Wang, Y., Inman, D. J., and Cudney, H. H., 1988. “Spatial Versus Time Hysteresis in Damping Mechanisms,” Proceedings of the 27th IEEE Conference on Decision and Control, December 1988, pp. 1674-1677.

633. Liang, Z. and Inman, D. J., 1988. “A Modal Parameter Identification Method with Arbitrary Low

Sampling Rate,” Proceedings of the International Conference on Machine Dynamics and Engineering Applications, August 1988, pp. A1-A5.

634. Inman, D. J. and Zimmerman, D. C., 1988. “Actuator Structure Interactions,” Second NASA/DOD Control

Structures Interaction Technology, AFWAL-TR-88-3052, June 1988, pp. 376-388.

635. Mook, D. J. and Inman, D. J., 1988. “A Numerical and Experimental Robustness Investigation of Time-Domain Realization/Identification Techniques,” Proceedings of the International Conference on Computational Engineering Science, April 1988, Vol. 2, pp. 64.

636. Mayne, R. W. and Inman, D. J., 1988. “Prospects of Damping Structures via Actuator Interaction,”

Proceedings of the International Conference on Computational Engineering Science, April 1988, Vol. 2, pp. 44.vi1-.vi4.

637. Oshman, Y. and Inman, D. J., 1988. “Optimal On-Line Measurement System Configuration Strategies,”

Proceedings of the 29th Structures, Structural Dynamics and Materials Conference, April 1988, Vol. 2, pp. 1048-1049.

Daniel J. Inman ()

638. Zimmerman, D. C., Inman, D. J. and Juang, J.-N., 1988. “Low Authority-Threshold Control for Large Flexible Structures,” Proceedings of the 29th Structures, Structural Dynamics and Materials Conference, April 1988, Vol. 1, pp. 459-469.

639. Ross, A. D. S. and Inman, D. J., 1988. “On Resonance of Lumped Mass Damped Linear Systems With

Normal Modes,” Proceedings of the 6th International Modal Analysis Conference, February 1988, Vol. 1, pp. 42-48.

640. Liang, Z. and Inman, D. J., 1988. “On Rank Decomposition Methods for Modal Analysis,” Proceedings of

the 6th International Modal Analysis Conference, February 1988, Vol. 2, pp. 1176-1179.

641. Garcia, E., Inman, D. J. and Horner, G. C., 1988. “System Identification in the Microcomputer Environment,” Proceedings of the 6th International Modal Analysis Conference, February 1988, Vol. 2, pp. 1596-1601.

642. Minas, C. and Inman, D. J., 1988. “Correcting Finite Element Models with Measured Modal Results Using

Eigenstructure Assignment Methods,” Proceedings of the 6th International Modal Analysis Conference, February 1988, Vol. 2, pp. 583-587.

643. Bellos, J. and Inman, D. J., 1988. “Lumped Systems with Non Proportional Damping,” Proceedings of the

6th International Modal Analysis Conference, February 1988, Vol. 2, pp. 876-882.

644. Banks, H. T., Wang, Y., Inman, D. J., and Cudney, H. H., 1987. “Parameter Identification Techniques for the Estimation of Damping in Flexible Structure Experiments,” Proceedings of the 26th IEEE Conference on Decision and Control, December 1987, Vol. 2, pp. 1392-1395.

645. Oshman, Y. and Inman. D. J., 1987. “Square Root State Estimator for Large Space Structures,”

Proceedings of the AIAA Guidance, Navigation and Control Conference, August 1987, Vol. 1, pp. 617-627.

646. Inman, D. J., Mayne, R. W. and Zimmerman, D. C., 1987. “Comments on Electromechanical Actuators for Controlling Flexible Structures,” Proceedings of the 5th AFOSR Forum on Space Structures, Monterey, California, August 1987, pp. 25-28.

647. Oshman, Y. and Inman, D. J., 1987. “Square Root Filtering for Continuous-Time Models of Large Flexible

Structures,” Proceedings of the 6th VPI&SU/AIAA Symposium on Dynamics and Control of Large Structures, Blacksburg, VA, June 1987.

648. Zimmerman, D. C., Inman, D. J. and Juang, J.-N., 1987. “Threshold Control Technique for Large Flexible

Structures,” Proceedings of the 28th Structures, Structural Dynamics and Materials Conference, April 1987, pp. 125-134.

649. Liang, Z. and Inman, D. J., 1987. “A Time Domain Method for Global Damping Measurement and Modal

Analysis,” Proceedings of the 5th International Modal Analysis Conference, April 1987.

650. Inman, D. J., 1987. “Symmetrizable Structures and Modal Control,” Structural Control, Proceedings of the 2nd International Symposium , July 1985, H. H. E. Leipholz, Ed., Martinus Nijhoff Publishers, pp. 329-342.

651. Zimmerman, D. C., Horner, G. H., and Inman, D. J., 1986. “Microprocessor Controlled Force Actuator,”

Proceedings of the 27th Structures, Structural Dynamics and Materials Conference, May 1986, pp. 243-251.

652. Liang, Z., Gao, Q. and Inman, D. J., 1986. “On Phase and Modal Parameter Measurement for Large

Structures,” Proceedings of the 4th International Modal Analysis Conference, February 1986, Vol. II, pp. 993-999.

Daniel J. Inman ()

653. Inman, D. J. and Jha, S. K., 1986. “Identification of the Damping Matrix for Tires,” Proceedings of the 4th International Modal Analysis Conference, February 1986, Vol. II, pp. 1078-1080.

654. Inman, D. J., 1985. “Control of Symmetrizable Distributed Parameter Systems,” Proceedings of the 24th

IEEE Conference on Decision and Control, December 1985, Vol. II, pp. 729-731.

655. Ahmadian, M. and Inman, D. J., 1985. “Closed-Loop Stability of Large Space Structures with Reduced Order Controllers,” Proceedings of the 5th VPI&SU & SU/AIAA Symposium on Dynamics and Control of Large Structures, July 1985, pp. 275-290.

656. Cudney, H. H., Inman, D. J., and Horner, G. C., 1985. “Vibration Control of Flexible Beams Using an

Active Hinge,” Proceedings of the 5th VPI&SU Symposium on Dynamics and Control of Large Structures, Blacksburg, VA, July 1985, pp. 455-470.

657. Inman, D. J. and Hendrickson, W. L., 1985. “Identification of a Damping Matrix from Model Data,”

Proceedings of the 5th VPI&SU Symposium on Dynamics and Control of Large Structures, Blacksburg, VA, July 1985, pp. 19-26.

658. Jiang, B. L. and Inman, D. J., 1985. “On the Damping Ratio Matrix in Multiple Degree of Freedom

Systems,” Proceedings of the 3rd International Modal Analysis Conference, January 1985, pp. 167-171.

659. DeCaro, S. M. and Inman, D. J., 1985. “Eigenvalue Placement and Stabilization by Constrained Optimization,” Proceedings of the JPL Workshop on Identification and Control of Flexible Space Structures, Vol. III, pp. 37-46.

660. Inman, D. J., 1985. “Finite Control of Undamped Distributed Parameter Systems,” Proceedings of the JPL

Workshop on Identification and Control of Flexible Space Structures, Vol. II, pp. 101-110.

661. Inman, D. J., 1984. “Critical Damping in Complex Structures and Control Systems,” Proceedings of the Air Force Vibration Damping Workshop, August 1984, pp. AAA-2-12.

662. Omrani, M. and Inman D. J., 1984. “Frequency Domain Analysis of a Plate with Discrete Elements

Attached,” Proceedings of the AIAA Dynamics Specialty Conference, May 1984, pp. 442-444

663. Ng, C. K. and Inman, D. J., 1984. “Active Control of Decoupled Underdamped Systems,” Proceedings of the 25th Structures, Structural Dynamics and Materials Conference, May 1984, pp. 192-200.

664. Zimmerman, D. C., Inman, D. J., and Horner, G. C., 1984. “Dynamic Characterization and Microprocessor

Control of the NASA-UVA Proof Mass Actuator,” Proceedings of the AIAA Dynamics Specialty Conference, May 1984, pp. 573-577.

665. Ahmadian, M. and Inman, D. J., 1984. “Modal Analysis in Non-Conservative Dynamic Systems,”

Proceedings of the 2nd International Conference on Modal Analysis, February 1984, Vol. 1, pp. 340-344.

666. Inman, D. J. and Hsieh, C. I., 1983. “Controllability of Non-Self Adjoint Flexible Systems,” ASME, November 1983, Paper 83-WA/DSC-16.

667. Inman, D. J., 1982. “Modal Analysis for Asymmetric Systems,” Proceedings of the 1st International

Conference on Modal Analysis, November 1982, pp. 705-708.

668. Ahmadian, M. and Inman, D. J., 1982. “A Computer Package for the Design and Eigenproblem Solution of Damped Linear Multidegree of Freedom Systems,” Proceedings of the Symposium on the Advances and Trends in Structural and Solid Mechanics, October 1982, NASA Conference Publication No. 2245, pp. 391-403.

Publications (Miscellaneous):

Daniel J. Inman ()

Correll, N., Baughman, R., Voyles, R., Yao, L., and Inman, D. J., 2018, Robotic Materials, Computing Community Consortium, November 2018. Daniel J. Inman, "Smart Structures Theory," AIAA Journal, (2014), accessed October 09, 2014, doi: http://arc.aiaa.org/doi/abs/10.2514/1.J053653 (book review). Owen, Robert B., Gyekenyesi, Andrew L., Inman, Daniel J., and Ha, Dong S., 2011. “Hardware Specific Integration Strategy for Impedance-Based Structural Health Monitoring of Aerospace Systems,” NASA Special Report NASA/CR-2011-217153, May 2011. Bressers, S., Avirovik, D., Vernieri, C., Regan, J., Chappell, S., Hotze, M., Luhman, S., Lallart, M., Inman, D., and Priya, S., 2010. “S27mall-Scale Modular Windmill,” American Ceramic Society Bulletin, Vol. 89, No. 8, October/November 2010, pp 34-40. Ashfari, M., Zhou, D., Verdier, G. and Inman, D. J., 2010, “Self Contained Structural Health Monitoring System for Repairing Bolted Connections”, The Technology Digest, TD10-20, July 2010. Inman, D. J. and Wereley, N. M., 2010. “How Long Does it Take to Publish a Paper?” Journal of Intelligent Material Systems and Structures, Vol. 21, pp. 123. Inman, D. J. and Lee, B. L., 2009, “Multifunctional Materials and Structures for Autonomic Systems,” Proceedings of the Institution of Mechanical Engineers, Part I, Journal of Systems and Control Engineering; Vol. 223, No. 4, pp. 431-434. Bae, J. S., Kim, J.Y., Lee, I., Matsuzaki, Y., and Inman, D. J., 2005. “Extension of Flutter Prediction Parameter for Multi-Mode Flutter System,” Journal of Aircraft (Technical Note); in press. Peairs, D., Grisso, B., Inman, D. J., Page, K., Athman, R., Margasahayam, R., 2003. “Proof-of-Concept Application of Impedance-based Health Monitoring on Space Shuttle Ground Structures,” NASA Special Report NASA-TM-2003-211193, September 5, 2003. Natarajan, A., R. K. Kapania, and D. J. Inman, 2002. “Aeroelasticity of Morphing Wings Using Neural Networks,'' Report No. VPI-AOE-281, Aerospace and Ocean Engineering, Blacksburg, VA, 24061. Park, G, and Inman, D. J., 2001. “Smart Bolts: an Example of Self-Healing Structures,” Smart Materials Bulletin, July, 2001, pp. 6-9. Pettit, G. W., Robertshaw, H. H., and Inman, D. J., 2001. “Morphing Wings for Unmanned Aircraft,” Smart Materials Bulletin, November, 2001, pp. 7-12. Huang, S. C. and Inman, D. J., 1994. “Review of Vibrations in Rotating Machinery,” Applied Mechanics Reviews, November 1994, Vol. 47, No. 11, PB104. Inman, D. J., 1985. Proceedings of the 2nd Forum on Space Structures, January 1985, Editor of Chapter on Structure and Plant Modeling, AFOSR. Inman, D. J., 1984. “New Career Directions in Engineering,” Engineering Horizons, Fall 1984. Inman, D. J., 1980. “The Nature of the Solutions of Damped Linear Dynamic Systems,” Ph.D. Dissertation, Michigan State University, June 1980. Inman, D. J., 1978. “Motion Control for the Dallas Condensation Soldering Machine,” Bell Laboratories Technical Memorandum, August 1978. Inman, D. J., Reaves, L. J., Vaughn, G. C., 1975. “Rediscovery of Snell’s Law via the Computer,” The Physics Teacher, vol. 13 no. 7 pp. 416-417, October 1975.

Daniel J. Inman ()

Presentations Not Listed Elsewhere: February 19, 2011 - appeared on PBS NOVA, http://www.pbs.org/wgbh/nova/tech/making-stuff-smarter.html Inman, D. J., 2010. “Energy Harvesting with Control,” presentation at Nanjing Aerospace University, 12 October 2010. Inman, D. J., 2010. “Review of Energy Harvesting and Monitoring Projects,” presentation at Cardiff University, Cardiff, Wales, 26 October 2010. Inman, D. J., 2010. “Fun with Funny Materials,” Presentation to the Advisory Board of the College of Engineering at Virginia Tech, 8 October, Blacksburg, VA. Inman, D. J., 2009. “What are the Yanks Doing?” Bristol Energy Harvesting Conference, Bristol, UK, 17 December 2009. Inman, D. J., 2009. “Fun with Funny Materials,” Manufacturing Technology Academy of NW Michigan, Traverse City Michigan, 23 November 2009. Inman, D. J., 2009. “Applications of Smart Structures,” Nanjing University of Aeronautics and Astronautics Inaugural Lecture, 19 October 2009. Inman, D.J., 2009. “Simultaneous Energy Harvesting and Flutter Suppression Using Macro Fiber Composites,” SICON, Rome, Italy, 21-25 September 2009. Cartmell, M. P., D. J. Inman, A. W. Lees, O. A. Ganilova, and L. Atepor, 2008, "Smart materials applications to structural dynamics and rotating machines", Proceedings Euromech 498 Colloquium, Kaximierz, Dolny. Ploland, May 21-14, 2008, pp 19-28 Inman, D. J., 2007. “Vibrational and Thermal Electric Energy Harvesting Using Smart Materials,” 1 November, University of Glasgow, one-day short course, Sponsored by EPSRC in UK. Inman, D. J., 2007. “Vibrational and Thermal Electric Energy Harvesting Using Smart Materials,” 29 October, University of Wales, Swansea, one-day short course, Sponsored by EPSRC in UK. D. J. Inman, 2007. “The Effects of Damping on Energy Harvesting and Comments on Harvesting Projects at Virginia Tech,” University of Texas at Arlington Workshop on Energy Harvesting, January 30-31, 2007. Neal, D., Farmer, J., Seigler, M., and Inman, D. J., 2006. “Development of a Morphing Aircraft Model for Wind Tunnel Experimentation,” ASME International Mechanical Engineering Congress and Exposition, November 5-10, Chicago, IL. Atepor, L., Cartmell, M. P., Inman, D. J., Lees, A. W., and Leize, Th., 2006. “Controlling Flexible Rotor Vibrations by Means of an Antagonistic SMA/Composite Smart Bearing,” 2006 Colston Research Society Symposium on Adaptive Structures, July 9-12, Bristol, UK. Inman, D. J., 2006. “Recent Applications of Smart Structures in Vibration Suppression,” Department of Mechanical and Aerospace Engineering, University of Glasgow, UK, 11 May 2006 (Invited). Inman, D. J., 2005. “Design, Control and Modeling of the Virginia Tech Morphing Aircraft,” Review Meeting, Marie-Curie Excellence Grant on Morphing Aircraft, University of Bristol, UK, 7 December 2005, 25 attendees (Invited).

Daniel J. Inman ()

Inman, D. J., 2005. “Vibration, Control and Structural Monitoring of Space Systems,” Department of Naval Architecture and Ocean Engineering, Pusan National University, Pusan, Korea, 2 November 2005, 80 attendees (Invited). Inman, D. J., 2005. “Research Activities at the Center for Intelligent Material Systems and Structures (CIMSS),” Dept. of Naval Architecture and Ocean Engineering, Pusan National University, Pusan, Korea, 2 November 2005, 80 attendees (Invited). Inman, D. J., 2005. “Towards Autonomous Structural Health Monitoring,” Michigan Technological University, Houghton, MI, 20 October 2005, 75 attendees (Invited). Inman, D. J., 2005. “Autonomous Structures: Adding Some Intelligence to Smart Structures,” J. Vinson Lecture, University of Delaware, October 7, 2005, 55 attendees (Invited). Inman, D. J., 2005. “Vibration and Control of Smart Flexible Satellites,” ICAM Conference on Mathematics as an Enabling Science, Virginia Tech, Blacksburg, VA, 1 October 2005, 50 attendees (Invited). Grisso, B. L. and Inman, D. J., 2005. “MFC for Structural Health Monitoring,” First International Symposium on Macro Fiber Composite Applications, September 27-28, Dresden, Germany (Invited). Inman, D. J., 2005. “Managing Your Research Career,” New Faculty Workshop, Research Division, Virginia Tech, September 16, 2005. Inman, D. J., 2005. “Sorting Out Flight Control Issues and Strategies for Large Scale Morphing in Uninhabited Aircraft,” at DARPA Defense Sciences Office, Arlington, VA, September 9, 2005, (Invited). Inman, D. J., 2005. “Why Should We Use Morphing in UAV's?” Department of Aerospace Engineering, University of Bristol, Bristol, UK, July 4, 2005, 83 attendees (Invited). Inman, D. J., 2005. “Autonomous Structural Health Monitoring using Piezoceramics,” Conservatoire National des Arts et Metiers (CNAM), June 20, 2005, 25 attendees (Invited). Inman, D. J., 2005. “Autonomous Structural Health Monitoring Using Piezoceramics,” 44th ICAT/JTTAS Joint International Smart Actuator Symposium, Penn State University, April 6-7, 2005. Inman, D. J., 2005. “Theoretical and Experimental Control for Morphing Aircraft,” DARPA/DSO Semi-annual Morphing Aircraft Structures PI Meeting, Tucson, Arizona, April 13-14, 2005. Inman, D. J., 2005. “Introduction to Structural Health Monitoring,” 23rd International Modal Analysis Conference, Orlando, Florida, Jan. 31 –Feb. 3, 2005. Inman, D. J., Sodano, H. A. and Park G., 2004. “Review of Piezoelectric Based Power Harvesting” , Air Force/Army/NSF Joint Workshop on Multifunctional Structures for Energy Harvesting & Storage, Stanford, CA, December 15-17, 2004 Inman, D. J., 2004. “Morphing Aircraft Theory and Experiments," 2004 Air Products Distinguished Lecture at Pennsylvania State University, State College, PA, April 6, 2004. Inman, D. J., 2004. “Morphing Nano Air Vehicle Delivery Systems,” DARPA Workshop on Nano Air Vehicles, Washington, DC, March 2-3, 2004 (Invited) . Inman, D. J., 2003. “Pushing the Envelope with Morphing Flight Control,” DARPA Contractor’s Meeting, Alexandria, VA, November 19, 2003. Inman, D. J., 2003. “Power Harvesting for Sensing,” Pan American Advanced Study Institute on Damage Prognosis, Florianopolis, Brazil, October 19-30, 2003 (Invited).

Daniel J. Inman ()

Inman, D. J., 2003. “Morphing Aircraft Structures at VT,” DARPA TIM Meeting, Coronado Island, CA, July 8-11, 2003. Inman, D. J., 2003. “VT Research on Morphing Wings,” Multidisciplinary Aerospace Design Advisory Board Meeting, Blacksburg, VA, April 25, 2003. Asmatulu, R. Claus, R. O., Mecham, J. B., and Inman, D. J., 2003. “The Temperature Dependent Ferroelastic Behaviors of VO2 and ZnO Nanocomposites for Structural Material Applications,” 2003 MRS Spring Meeting, April 21-25, 2003, San Francisco, California. Inman, D. J., “Ultra Flexible Spacecraft and Morphing UAVs,” ICAM Workshop on Control and Identification in Honor of Gene Cliff’s Retirement, September 27-28, 2002, Blacksburg, VA Inman, D. J., 2002. “Shunting Macro-Fiber Composite Actuator for Structural Damping,” ISMA 27, Leuven, Belgium, September 16-18, 2002. Inman, D. J., 2002. “Power Harvesting Using Smart Materials,” International Conference on Adaptive Structures Technology, Potsdam Germany, October 2002. Inman, D. J., 2002. “Modeling and Simulation for Damage Prognosis,” DoD Workshop on Prognostics, 17-18 July, 2002, Arlington, VA (Invited). Inman, D. J., 2002. “Applications of Smart Materials in Structures,” Tutorial, National Space and Missiles Materials Symposium, June 24-28, 2002, Colorado Springs, CO (Invited). Ruggiero, E., Sodano, H., Park, G., and Inman, D. J., 2002. “Active Vibration Suppression of a Gossamer Spacecraft,” Proceedings, 14th U.S. National Congress on Theoretical and Applied Mechanics (USNCTAM), June 23-28, Blacksburg, VA. Peairs, D. M., Park, G. and Inman, D. J., 2002. “Low-Cost Health Monitoring Using the Impedance Method,” Proceedings, 14th U.S. National Congress on Theoretical and Applied Mechanics (USNCTAM), June 23-28, 2002, Blacksburg, VA. Silva, L. A., Austin, E. M., and Inman, D. J., 2002. “The Role of Internal Variables on the Control of Viscoelastic Structures,” Proceedings, 14th U.S. National Congress on Theoretical and Applied Mechanics (USNCTAM), June 23-28, 2002, Blacksburg, VA. Williams, R.B., Inman, D. J. and Wilkie, W. K., 2002. “Modeling of Temperature Effects in Macro Fiber Composite Actuators,” Proceedings, 14th U.S. National Congress of Theoretical and Applied Mechanics Conference (USNCTAM), Blacksburg, VA, June 23-28. Inman, D. J. and Robertshaw, H. H., “Wings Out of the Box,” DARPA CHAP Review, Buffalo, NY, June 19-21, 2002. Inman, D. J., 2002. “Historical Perspective for Gossamer Structures: Lessons Learned from the Large Flexible Space Structure Era,” AFRL/DARPA Workshop on Ultra-Large Space Antenna Structures, May 21-22, 2002, Santa Fe, New Mexico (Invited). Inman, D. J., 2002. “Low-Cost Impedance Monitoring Using Smart Materials,” Proceedings of the 1st European Workshop on Structural Health Monitoring, Paris, France, July 9-12, 2002. Inman, D. J., 2001. “Overview of Smart Structures”, 15th Annual Review, Center for Turbomachinery and Propulsion Research, Virginia Tech, October 2, 2001.

Daniel J. Inman ()

Inman, D. J., 2001. “Wings: Out of the Box Determining Actuator Requirements for Controlled Morphing Air Vehicles – Aerodynamic Loads,” DARPA Technology Interchange Meeting, November 4-8, 2001, Wright Patterson Air Force Base, Dayton, Ohio.

Inman, D. J., 2001. “Smart Structures for Vibration Suppression of Optical Surfaces”, AFOSR Contractors Meeting in Mechanics of Composite Materials and Structural Mechanics,” October 18, Washington, DC. Inman, D. J., 2001. “Nonlinear Control and Robust Observer Design for Marine Vehicles,” Final MURI Nonlinear Active Control of Dynamical Systems, Blacksburg, VA, June 19-20, 2001. Inman, D. J., 2001. “Inflatable Smart Structures for Satellites,” NASA Langley Research Center, Hampton, VA, January (Invited). Inman, D. J., 2000. “Smart Materials Technologies for Bolted-Joints in Civil Systems,” MEDAT-2 Workshop, Las Vegas, Nevada, 30 November – 1 December 2000 (Invited). Inman, D. J., 2000. “Simultaneous Health Monitoring and Control of Panels,” 71st Shock and Vibration Symposium, Arlington, Virginia, 6-9 November 2000. Inman, D. J., 2000. “Suppressing Plate Vibrations with Smart Materials,” 71st Shock and Vibration Symposium, Arlington, Virginia, 6-9 November 2000. Lopes, V., Steffen, Jr., V., and Inman, D. J., 2000. “Optimal Placement of Piezoelectric Sensor/Actuators for Smart Structures Vibration Control,” at conference in Rio, Brazil, July 2000. Inman, D. J., 2000. “Smart Structures for Design,” Imperial College, London, UK , June 30, 2000. Inman, D. J., 2000. “Smart Damping,” Picatinny Arsenal, New Jersey, September 7(Invited). Inman, D. J., 2000. “Smart Structures for Vibration Suppression of Optical Surfaces,” AFOSR Contractors Meeting, Columbus, Ohio, 10-11 October. Inman, D. J., 2000. “Thoughts on Multifunction Flight Vehicles,” Air Force Workshop: Toward a Smart Aircraft, Wright Patterson Air Force Base, Dayton, Ohio, 6 June 2000. Inman, D. J., 2000. “Bolted Joints: Damping and Impedance,” Sandia Joint Workshop on the Modeling and Simulation of Structures with Jointed Interfaces, Sandia National Laboratory, Albuquerque, New Mexico, 25-26 April 2000. Inman, D. J., 2000. “Vibration Testing for Control of Inflated Objects,” SECTAM-XX, Callaway Gardens, Pine Mountain, Georgia, 16-18 April 2000. Inman, D. J., 2000. “Multifunctional Structures for the Next Millennium,” Panel Discussion on the Future of Structural Dynamics - 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, Georgia, 3-6 April 2000. Inman, D. J., 1999. “Mechanics Reform: Dynamics with Motion Using Computational Software,” ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennessee, 14-19 November (Invited). Inman, D. J., 1999. “Smart Structures for Vibration Suppression of Optical Surfaces,” Air Force Office of Scientific Research Structural Mechanics Workshop, Wright Patterson Air Force Base, 27-29 September (Invited). Inman, D. J., 1999. “Distributed Modeling and Control of Adaptive Wings,” Air Force Office of Scientific Research Structural Mechanics Workshop, Wright Patterson Air Force Base, 27-29 September (Invited).

Daniel J. Inman ()

Inman, D. J., 1999. “SMAs for Tab Control,” Office of Naval Research S&T Submarine Maneuvering Review, Arlington, Virginia, 21 September. Inman, d. J., 1999. “Smart Structures and Active Damping,” Imperial College of Science, Technology, and Medicine, Structural Dynamics Meeting, London, England, 21 July (Invited). Inman, D. J., 1999. “Adaptive Wings,” DARPA Technology Interchange Meeting, Hampton, Virginia, 17 June (Invited). Inman, D. J., 1999. “Multifunctional Structures for the Next Millennium,” SD2000, Los Alamos, New Mexico, 12-16 April (Invited). Inman, D. J., 1999. “Neural Network Application to Fault Diagnosis for Underwater Vehicles Using a Non-Linear Observer,” Fourth Semi-Annual Review Meeting ONR MURI Nonlinear Active Control of Dynamical Systems, Blacksburg, Virginia, March . Inman, D. J., 1998. “Output Feedback Control of Underwater Vehicles Using a Nonlinear State Observer,” Third Semi-Annual Review Meeting ONR MURI Nonlinear Active Control of Dynamical Systems, Blacksburg, Virginia, October. Inman, D. J., 1998. “On the Role of Damping in Damage Detection,” Army Research Labs/Army Research Office Mini-Workshop on Damage Detection and Structural Health Monitoring, Aberdeen, Maryland, 28 April (Invited). Inman, D. J., 1998. “Sliding Mode Control Design of Underwater Vehicles With Bounded Disturbances Using Output Feedback,” Second Semi-Annual Review Meeting ONR MURI Nonlinear Active Control of Dynamical Systems, Blacksburg, Virginia, April. Inman, D. J., 1997. “Effect of Rudder Dynamics on Underwater Vehicles,” First Semi-Annual Review Meeting ONR MURI Nonlinear Active Control of Dynamical Systems, Blacksburg, Virginia, October. Inman, D. J., 1997. “Intelligent Material Systems,” NASA New Millenium Program, Langley, Virginia, October (Invited). Inman, D. J., 1997. “Store Induced Flutter Suppression,” AFOSR Contractors Meeting, Myrtle Beach, South Carolina, 21-22 September (Invited). Inman, D. J., 1997. “Control of Thermally Induced Vibration,” McNu97, Northwestern University, June (Invited). Inman, D. J., 1997. “Issues on Smart Structures,” IMechE/ESPRC Expert Meeting on Smart Structures, Lock Lomand, Scotland, February (Invited). Inman, D. J., 1997. “A Model Updating Method for Adaptive Control,” 5th Pan American Congress of Applied Mechanics, Puerto Rico, January (Invited). Inman, D. J., 1997. “Store Induced Flutter Suppression,” 1997 AFOSR/ARO Structural Mechanics Workshop, Virginia Beach, Virginia (Invited). Inman, D. J., 1995. “An Inverse Solution to Eigenstructure Assignment,” 1995 SIAM Annual Meeting, Charlotte, North Carolina, October (Invited). Inman, D. J., 1995. “Nonmodal Damage Detection Using Smart Structures,” Second Workshop on Smart Structures, Baltimore, Maryland, September. Inman, D. J., 1995. “Some Design Considerations for Active/Passive Damping Treatments,” Second Workshop on Smart Structures, Baltimore, Maryland, September.

Daniel J. Inman ()

Inman, D. J., 1995. “Symmetry in Inverse Eigenvalue Problem for Mechanical System,” International Congress on Industrial and Applied Mathematics, Hamburg, Germany, July (given by M. Atalla) (Invited). Inman, D. J., 1995. “Eigenstructure Assignment for 2nd Order Systems via Inverse Methods,” International Congress on International and Applied Mathematics, Hamburg, Germany, July (Invited). Inman, D. J., 1995. “Future Directions for Structures and Dynamics,” U.S. Army Mechanics Research Strategy Planning Workshop, Myrtle Beach, South Carolina, 21 March. Inman, D. J., 1994. “Modeling of Active Constrained Layer Damping,” Society of Engineering Science 31st Annual Technical Meeting, College Station, Texas, 10-12 October. Inman, D. J., 1994. “Smart Viscoelastic Structures,” Society of Engineering Science 31st Annual Technical Meeting, College Station, Texas, 10-12 October (Invited). Inman, D. J., 1994. “Vibration Suppression via Eigenstructure Assignment and Inverse Methods,” IUTAM Symposium: The Active Control of Vibration, Bath, United Kingdom, 5-8 September (Invited). Inman, D. J., 1993. “Comments on Modeling Programmable Materials and Structures for Vibration Suppression,” Army Research Office Workshop on Smart Structures, Arlington, Texas, 24 September (Invited). Inman, D. J., 1993. “Smart Structures and Vibration Control,” Workshop on Smart Structures, Vibration Control and Aeroservoelasticity, Tainan, Taiwan, Republic of China, 2-4 June (Invited). Inman, D. J., 1991. “Smart Structures - Where's the Beef,” AFOSR Contractors Meeting, Dayton, Ohio, October (Invited). Inman, D. J., 1991. “Estimation, Model Correction and Inverse Problems,” International World Congress on Computation and Applied Mathematics, Dublin, Ireland, July (Invited). Inman, D. J., 1991. “Damping in Coupled Bending and Torsion,” M3D Mechanics and Mechanisms of Material Damping Symposium, Baltimore, Maryland, March (Invited). Inman, D. J., 1990. “Updating Analytical Models with Experimental Data,” 2nd USAF/NASA Workshop on System Identification and Health Monitoring of Precision Space Structures, Pasadena, California, March (Invited). Inman, D. J., 1990. “On the Nature of the Interaction Between Structures and Actuators in Vibration Suppression,” International Congress on Recent Developments in Air and Structure Borne Sound and Vibration, Auburn, Alabama, March (Invited). Inman, D. J., 1990. “Issues in Slewing an Active Structure,” US/Japan Workshop on Smart/Intelligent Materials and Systems, Honolulu, Hawaii, March (Invited). Inman, D. J., 1989. “Modal Identification for a Hysteretic Structure,” Acoustical Society Meeting, Syracuse, New York, May (Invited). Inman, D. J., 1988. “Control Structure Interaction Experiments,” NSF/INRIA Workshop on Computational Aspects of Identification and Control of Distributed Parameter Systems, Brown University, Providence, Rhode Island, August (Invited). Inman, D. J., 1988. “Experimental Modeling and Control of Distributed Mass Structures with Lumped Mass Actuators,” Optimization Days, Montreal, Quebec, May. Inman, D. J., 1987. “Actuator Issues in Controlling Flexible Structures,” Second NASA/DOD Control Structures Interaction Technology Conference, Colorado Springs, Colorado, November (Invited).

Daniel J. Inman ()

Inman, D. J., 1987. “Comments on Electromechanical Actuators for Controlling Flexible Structures,” 5th AFOSR Forum on Space Structures, Monterey, California, 20 August. Inman, D. J., 1986. “Shock Loading of Large Flexible Space Structures,” ASCE 1986 Annual Conference, Boston, Massachusetts, October (Invited). Inman, D. J., 1986. “On the Dynamics of Pseudo-Symmetric Systems.” The 23rd Annual Meeting of the Society of Engineering Science, Buffalo, NY, August. Inman, D. J., 1986. “Identification of a Damping Model in Cord Rubber Composites,” International Symposium on Composite Materials and Structures, Beijing, China, June (Invited). Inman, D. J., 1985. “On the Time Response of Multidegree of Freedom Second Order Systems,” 22nd Annual Meeting of the Society of Engineering Science, University Park, Pennsylvania, October (Invited). Inman, D. J., 1985. “Oscillatory Non-Self-Adjoint Systems,” 19th Midwest Mechanics Conference, Ohio State University, Columbus, Ohio, September. Inman, D. J., 1985. “Dynamics and Control of Temperature Dependent Flexible Structures,” AFOSR Third Forum on Large Space Structures, College Station, Texas, July. Inman, D. J., 1984. “Decay Rates for Linear Dynamical Systems,” 21st Annual Society of Engineering Science, Blacksburg, Virginia, October. Inman, D. J., 1984. “Controllability and Observability of Flexible Gyroscopic Systems,” 21st Annual Society of Engineering Science Meeting, Blacksburg, Virginia, October. Inman, D. J., 1984. “On the Stability of General Linear Dynamic Systems,” 21st Annual Society of Engineering Science Meeting, Blacksburg, Virginia, October. Inman, D. J., 1984. “Modes and Critical Damping in Asymmetric Linear Dynamic Systems,” XVIth ICTAM, Lyngby, Denmark, August. Inman, D. J., 1984. “Finite Control in Underdamped Distributed Parameter Systems,” JPL Workshop Identification and Control of Flexible Space Structures, San Diego, California, June. Inman, D. J., 1984. “Eigenvalue Assignment by Constrained Optimization,” JPL Workshop Identification and Control of Flexible Space Structures, San Diego, California, June. Inman, D. J., 1983. “Modal Control of a Class of Non-Self Adjoint Systems,” SIAM 1983 Fall Meeting, Norfolk, Virginia, November. Inman, D. J., 1983. “Critically Damped Dynamic Systems,” 20th Annual Society of Engineering Science Meeting, Newark, Delaware, August. Inman, D. J., 1982. “The Nature of the Temporal Solutions of Damped Linear Distributed Systems with Classical Normal Modes,” ASME Winter Annual Meeting, Phoenix, Arizona, November 1982. Inman, D. J., 1982. “An Oscillation Theorem for Damped Distributed Parameter Systems,” 19th Annual Meeting of the Society of Engineering Science, Rolla, Missouri, October. Inman, D. J., 1982. “Normal Modes for Asymmetric Systems,” 19th Annual Meeting of the Society of Engineering Science, Rolla, Missouri, October. Inman, D. J., 1982. “Modal Control for a Class of Linear Discrete Vibrating Systems,” 19th Annual Meeting of the Society of Engineering Science, Rolla, Missouri, October (Invited).

Daniel J. Inman ()

Inman, D. J., 1982. “Lambda Matrices with Asymmetric Coefficients with Application to Vibration Theory,” SIAM Conference on Applied Linear Algebra, Raleigh, North Carolina, April. Inman, D. J., 1982. “Qualitative Results for Asymmetric Dynamical Systems,” 9th U.S. National Congress of Applied Mechanics, Ithaca, New York, 1982. Inman, D. J., 1981. “A Procedure for Designing Overdamped Lumped Parameter Systems,” Shock and Vibration Symposium, New Orleans, Louisiana, October. Inman, D. J., 1981. “The Nature of the Temporal Solutions of Damped Linear Distributed Systems with Classical Normal Modes,” 18th Annual Meeting of the Society of Engineering Science, Providence, Rhode Island, September. Inman, D. J., 1980. “Some Results on the Nature of Eigenvalues of Discrete Damped Linear Systems,” ASME Winter Annual Meeting, Chicago, Illinois, November 1980. Inman, D. J., 1980. “Sufficient Conditions for the Completeness of the Eigenvectors of Nonconservative Linear Dynamic Systems,” XVth ICTAM, Toronto, Canada, August 1980. Short Courses Taught: Mechanical Vibration: Where Do We Stand? Series of 5 lectures at CISM - International Centre for Mechanical Sciences, Udine, Italy, June 13-17, 2005; 44 attendees

Lecture 1: Smart Materials and Structures Lecture 2: Basics of Control for Vibration Suppression Lecture 3: Application of Smart Materials for Vibration Suppression Part 1 Lecture 4: Application of Smart Materials for Vibration Suppression Part 2 Lecture 5: Smart Structures for Structural Health Monitoring

Smart Structures and Nanotechnologies, with R. Batra and R. O. Claus through Division of Continuing and Professional Education, Virginia Tech, May 2002, May 2004. Smart Structures and Nanotechnologies, with R. Batra, D. J. Leo and R. O. Claus through Division of Continuing and Professional Education, Virginia Tech, May 2003. Engineering and Designing Smart Structures with R. Batra, R. O. Claus, and H. H. Cudney, through Division of Continuing Education, Virginia Tech, March 1998, November 1998, March 1999, May 1999, May 2000, May 2001, December 2001. Smart Structures and Materials with R. O. Claus, C., Rogers, C. Johnson, and W. Spillman, (1996, 1997, 1998), preceding the 1995, 1996, 1997, 1998, 1999, 2000 SPIE American Conference on Smart Materials and Structures, San Diego, California. Smart Structures and Materials with C. Rogers, Z. Chaudhry, ASME Satellite Short Course, Broadcast live September 28, 1994. Smart Structures with H. S. Tzou, G. Knowles, A. Baz, February 1994, Following the SPIE North American Conference on Smart Materials and Structures, Orlando, Florida. Smart Structure Vibration and Control and Aeroservoelasticity, with E. H. Dowel, E. Crawley, June 1993, National Cheng Kung University, Taiwan. Control Methods for Smart Structures with H. T. Banks, November 3, 1991, Proceedings of the ADPA/AIAA/ASME/SPIE Active Materials and Adaptive Structures Conference, Alexandria, VA. Modal Testing with A. Soom, April 1985, April 1986, April 1987, Buffalo, New York.

Daniel J. Inman ()

Graduate Student Supervision: Degrees Granted MS: Joyce, Bryan, Development of an Electromagnetic Energy Harvester for Monitoring Wind Turbine Blades, December 2011. Konchuba, Nick, Temperature Compensation Improvements for Impedance-Based Structural Health Monitoring, June 2011. Hills, Zach, Using Macro-Fiber Composite Actuators for Aquatic Locomotion, May 2010. Butrym, Brad, Crack Detection in Aluminum Structures, April 2010. Murphy, Devon, Analysis of a Rotary Ultrasonic Motor for Application in Force-Feel Systems, August 2008. Anton, Steve, Improving Baseline Management and the Energy Supplies of Structural Health Monitoring Systems, July 2008 Pitchford, Corey, Impedance-Based Structural Health Monitoring of Wind Turbine Blades, August 2007. Farmer, Justin, Comparison of Power Harvesting Techniques, May 2007. Bilgen, Onur, Macro Fiber Composite Actuated Micro Air Vehicles: Design, Development, and Testing, May 2007 (co-advised with Andy Kurdila in ME Dept). Neal, David, III, Design and Development of a Morphing Aircraft Model for Wind Tunnel Experimentation, April 2006. Sutton, Daniel J., Improved Reduced Order Modeling Strategies for Coupled Parametric Systems, August 2005. Simmers, G. Eddie, Impedance-Based Structural Health Monitoring to Detect Corrosion, May 2005. Grisso, Benjamin, Considerations of the Impedance Method, Wave Propagation, and Wireless Systems for Structural Health Monitoring, August 2004. Allen, David, Prototyping Software for Manipulating and Embedding Data Interrogation Processes into Integrated Systems: Special Application to Structural Health Monitoring, August 2004. Tarazaga, Pablo, Model Updating Using a Quadratic Form, July 2004. Good, Matthew, Development of a Variable Camber Compliant Aircraft Tail Using Structural Optimization, June 2004. Martin, Luke, Self-Powered Structural Health Monitoring Patch, June 2004. Lloyd, Justin, Electrical Properties of Macro Fiber Composite Actuators and Sensors, June 2004. Kikuta, Michael T., Mechanical Properties of Candidate Materials for Morphing Wings, December 2003. Sodano, Henry, The Use of Macro-Fiber Composites (MFC) for Structural Applications, August 2003. Eggborn, Timothy, Analytical Model to Predict Power Harvesting in Piezoelectric Material, May 2003. Cundy, Mandy, Use of Response Surface Metamodels in Damage Identification of Dynamic Structures, January 2003. Peairs, Dan, Development of a Self-Sensing and Self-Healing Bolted Joint, July 2002. Ruggiero, Eric, Active Dynamic Analysis and Vibration Control of Gossamer Structures Using Smart Materials, May 2002. Smith, Clayton, Analytical Modeling and Equivalent Electromechanical Loading Techniques for Adaptive Laminated Piezoelectric Beams and Plates, January 2001. Lewis, Jake, Finite Element Modeling and Active Control of an Inflated Torus Using Piezoelectric Devices, December 2000. Williams, Brett, Localized Effects of Piezopolymer Devices on the Dynamics of Inflatable Space-Based Structures, August 2000. Hegewald, Thomas, Vibration Suppression Using Smart Materials in the Presence of Temperature Changes, July 2000. Salmoanoff, Jason, A Finite Element, Reduced Order, Frequency Dependent Model of Viscoelastic Damping, December 1997. Holcomb, Mark, Active Control Using Piezoceramic Linear Motors, March 1994. Calamita, James, Modeling and Control of a Fiberglass Beam with Imbedded Self Sensing Piezoceramic Actuators, November 1993. Lam, Margaretha, Symmetric Model Updating and Control of Mechanical Systems, November 1993. Pokines, Brett, A Piezoceramic Vibration Suppression Device using Strain Induced Bending, June 1993. Rietz, Ralph, Nonlinear Feedback Control of a Flexible Structure, August 1992. Curtis, Jeffrey, An Active/Passive Control Synergism for a Planer Two-Dimensional Truss, August 1992.

Daniel J. Inman ()

Leo, Donald J., Active Control of a Slewing Frame, July 1992. Albassam, Bassam, Partial Eigenstructure Assignment with Output Feedback, June 1992. Song, Dongwoo, Robust Eigenstructure Assignment via Inverse Methods, April 1992. Hamernik, Tami, Optimal Placement via Simulated Annealing of Passively Damped Member in a 2-Dimensional Truss, February 1992 (Co-Chair with E. Garcia). Riedel, James, Coiled Tube Hydraulic Reservoir Technology, January 1992. Slater, Joseph C., Modeling of Non-proportional Frequency Dependent Viscoelastic Damping in Space Structures, October 1991. Kress, Andreas, Model Correction and Control by Inverse Methods, October 1991. Insalaco, Michael, An Investigation Into Modal Analysis Using Experimental and Finite Element Techniques and Including Rotational Degrees of Freedom, May 1991. Dosch, Jeffrey, A Self Sensing Piezoelectric Actuator for Collocated Control, February 1991. Johnson, Dexter, Active Suspension in Experiments, July 1989. Korpanthy, Daniel, Projectile Guidance Using Multiple Lateral Thrusters, May 1989. Martinez, Greselda, Analysis and Design of a Linear Ultrasonic Motor, April 1989. Su, Echung, PC Based Modal Analysis Software, January 1989. Minas, Constantinos, Modal Correction via Pole Placement Methods, January 1988. Lee-Glauser, Gina, Experimental Verification of Eigensystem Realization Algorithm, January 1988. Sheth, Upendra R., Modal Cost Analysis for Model Reduction, December 1987. Bellos, John, Vibrations of Non-Proportionally Damped Structures, October 1987. Garcia, Ephrahim, System Identification in the Micro Computer Environment, August 1987. Lochocki, Ronald F., Digital Control of Flexible Structures - an Experimental Approach, August 1987. Cook, Pauline J., Identifying Modal Data for Compressors, February 1987. Ebbing, David, Damping in Composite Materials, August 1986. Cudney, Harley, Digital Control of a Beam with Joint, June 1986. Pong, Meau-Fu, Effect of Complex Modes on Modal Testing, January 1986. Shen, Hvue-Min, Identifying the Damping Matrix from Modal Data, August 1985. Tylock, James, Noise Control Experiments, August 1985 (Co-Chair with A. Soom). Hendrickson, William, Identification of a Damping Matrix for Composites, February 1985. Ashrafiuon, Hashem, Comparisons of Critical Damping Computations, December 1984. Chang, Min-Yung, Synthesis of Mechanical Systems with Damping, August 1984. Ghanime, George, Numerical Solutions of Non Conservative Systems, April 1984. Zimmerman, David, Microprocessor Based Control of On Board Actuators, April 1984. DeCaro, Sandy, Eigenvalue Assignment for Non Conservative Dynamic System, March 1984. Schulz, Mark, Study of Damper Placement for Beam Vibration Control, March 1984. Musiol, Irene, Bounds on the Forced Response of Distributed Parameter Systems, March 1984. Ding, J. H., On Distributed Systems with Discrete Damping, 1983. Tsui, Eddy, Investigation of Normal Modes for System with Asymmetric Mass Matrix, August 1983. Hsieh, C. J., Controllability and Observability of Asymmetric Dynamic Systems, March 1983. Omrani, Massood, Vibration and Control of Beams and Plates Carrying Discrete Elements, January 1983. Ng, Chi, Active Control of Decoupled Underdamped Systems, December 1982. Tikoo, S., Bounds on Drive Train Vibrations, May 1982. Orabi, I., Critical Damping in Linear Discrete Dynamic Systems, May 1982. Liu, C., Analysis of Gyroscope Stability by Matrix Methods, February 1982. Ahmadian, M., A Computer Design Package for Damped Linear Dynamic Systems, November 1981. Lee, Wu Long, Numerical Solution of General Linear Dynamic System by the Generalized Euler Method, August 1981. Degrees Granted:

1. Krystal L. Acosta, “Characterizing the Pyroelectric Effects in Macro-Fiber Composites”, July, 2020, now at NASIC, Wright Patterson Air Force Base.

2. Brittany Essink, “Design and Implementation of Mecahanial Metamaterials”, December 2019, now at Exponent, Inc.

3. Andrew J. Lee, “Piezoelectrically Generated Bistable Composites for Morphing, Energy Haresting and Vibration Control” May 2019, now a postdoc at Cal Tech.

Daniel J. Inman ()

4. Gamble, Lawren L., “Bio Inspired Control of Rudderless Morphing UAVs”, June 2018, currently a postdoctoral researcher at the University of Michigan

5. Reichl, K. K., PhD., “Active Metastructures for Lightweight Vibration Suppression”, March 2018, currently and Assistant Professor at Milwaukee School of Engineering.

6. Pankonien, Alexander, M., PhD, “Smart Material Wing Morphing for Unmanned Aerial Vehicles”, April, 2015, currently a Researcher, Air Force Research Laboratories, Dayton, Ohio.

7. Spak, Kaitlin, PhD, “Modeling Cable Harness Effects on Spacecraft Structures”, June 2014, Currently with Exponent, Inc.

8. Choi, Jiduck, PhD, “Investigation of the Dynamic Behavior of Cable-Harnessed Structures”, May 2014, currently with the Korean Defense Agency.

9. Hobeck, Jared D., PhD, “Energy Harvesting with Piezoelectric Grass for Autonomous Self-Sustaining Sensor Networks,” April 2014, currently an Assistant Professor, Kansas State University, Department of Mechancial and Nuclear Engineering

10. Faria, Cassio, PhD, “Robust Model-Based Control of Nonlinear Bio-Inspired Autonomous Underwater Vehicles,” August 2013, currently a research engineer with LMS (Siemens).

11. Mana Afshari, PhD, “Vibration and Impedance Based Structural Health Monitoring Applications and

Thermal Effects,” 25 May 2012, currently at OSI Soft, California.

12. Dodson, Jacob, PhD, “Guided Wave Structural Health Monitoring with Environmental Considerations” , April, 2012, Currently a researcher at the Air Force Research Laboratory, Eglin, FL.

13. Wang, Ya, PhD, “Simultaneous Harvesting and Control,” February, 2012, currently an Associate Professor,

Department of Mechanical Engineering, Texas A&M University, College Station, TX

14. Karami, Amin, “Micro-Scale and Nonlinear Vibrational Energy Harvesting,” June 2011; currently an Associate Professor, Department of Mechanical and Aerospace Engineering, State University of New York, Buffalo, NY.

15. Ohanian, John, “Ducted Fan Aerodynamics and Modeling, with Applications of Steady and Synthetic Jet

Flow Control,” May 2011; currently an Aircraft Design Engineer, Luna LLC, Blacksburg, VA.

16. Anton, Steve, “Multifunctional Piezoelectric Energy Harvesting Concepts,” April 2011; currently an associate professor at the Tennessee Tech.

17. Martin, Luke, A Novel Material Modulus Function for Modeling Viscoelastic Materials, April 2011;

currently Technical Lead, Mechanical Measurements Engineering Section, Naval Surface Warfare Center, Dahlgren, VA.

18. Bilgen, Onur, “Aerodynamic and Electromechanical Design, Modeling and Implementation of

Piezocomposite Airfoils,” August 2010 (co-advised with Kevin Kochersberger in ME Dept.); currently an Assistant Professor at Rutgers University, Rutgers, NJ.

19. Erturk, Alper, “Electromechanical Modeling of Piezoelectric Energy Harvesters”, December 2009;

currently Professor, School of Mechanical Engineering, Georgia Tech, Atlanta, GA.

20. Tarazaga, Pablo, “Dynamics and Control of Pressurized Optical Membranes”, August 2009; currently an Associate Professor, Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA.

21. Renno, Jamil, “Dynamics and Control of Membrane Mirrors for Adaptive Optic Applications,” September

2008; currently Senior Lecture, University of Southampton, UK.

Daniel J. Inman ()

22. Salehian, Armaghan, “Distributed Parameter Modeling of Large Flexible Satellites with Design and

Control Applications,” January 2008; currently an Associate Professor, University of Waterloo, Ontario, Canada.

23. Grisso, Benjamin, “Advancing Autonomous Structural Health Monitoring, November 2007,” currently a

Research Scientist at the Naval Surface Warfare Center, West Bethesda, MD.

24. Allison, Timothy, System Identification via the Proper Orthogonal Decomposition, October 2007; currently Research Engineer, Mechanical and Fluids Engineering Department, Southwest Research Institute.

25. Peairs, Dan, “High Frequency Modeling and Experimental Analysis for Implementation of Impedance-

based Structural Health Monitoring,” May 2006; currently a Staff Scientist, L-3 Fuzing & Ordnance Systems, Cincinnati, OH.

26. Seigler, T. Michael, “Dynamics and Control of Morphing Aircraft,” August 2005; currently an Associate

Professor at the University of Kentucky, Lexington, KY.

27. Ruggiero, Eric, “Modeling and Control of SPIDER Satellite Components,” August 2005; currently a Mechanical Engineer with GE Global Research Center in Niskayuna, NY.

28. Sodano, Henry, “Development of Novel Eddy Current Damping Mechanisms for the Suppression of

Structural Vibrations, May 2005; currently a Professor at the University of Michigan, Ann Arbor, Michigan.

29. Majeed, Majed, “Deformations of In-Plane Loaded Unsymmetrically Laminated Composite Plates,”

February 2005 (co-advised with Mike Hyer in ESM), currently Professor, University of Kuwait, Kuwait.

30. Wang, Kaihong, “Vibration Analysis of Cracked Composite Bending-Torsion Beams for Damage Diagnosis,” November 2004; currently with AREVA NP, Inc., Naperville, IL.

31. Williams, Brett, “Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber

Composites,” March 2004; currently with Raytheon Company, El Segundo, CA.

32. Tanner, Troy, “Combined Shock and Vibration Isolation Through the Self-Powered, Semi-Active Control of a Magnetorheological Damper in Parallel with an Air Spring,” November 2003; currently with PAR Technologies, LLC, Hampton, VA.

33. Da silva, Luciano Afonso, “Internal Variable and Temperature Modeling Behavior of Viscoelastic

Structures – A Control Analysis,” August 2003; currently with Embreair, Brazil.

34. Jha, Akhilesh, “Vibration Analysis and Control of an Inflated Torus,” July 2002, currently with NextGen Aeronautics, Torrance, CA.

35. Tuzcu, Ilhan, Dynamics and Control of Flexible Aircraft, December 2001; currently an Associate

Professor, University of Alabama (Co-Chair).

36. Kim, Myung-Hyun, “Nonlinear Control and Robust Observer Design for Marine Vehicles,” November 2000, currently a Professor, Pusan National University, Korea.

37. Carneiro, Sergio H. S., “Model-Based Vibration Diagnostic of Cracked Beams in the Time Domain,”

August 2000, currently a Research Scientist at the Institute for Aeronautics and Space, CTA/IAE/ASA Sáo José dos Campos, Paulo, Brazil.

Daniel J. Inman ()

38. Park, Gyuhae, “Assessing Structural Integrity using Mechatronic Impedance Transducers with Applications in Extreme Environments,” April 2000, Professor of Mechanical Engineering, Chonnam National University. Gwagju, S. Korea.

39. Cattarius, Jens, “Numerical Wing/Store Interaction Analysis of a Parametric F16 Wing,” October 1999, currently with DaimlerChrysler in Berlin, Germany.

40. Rusovici, Razvan, “Modeling of Shock Wave Propagation and Attenuation in Viscoelastic Structures,”

October 1999, currently Professor, Department of Mechanical and Aerospace Engineering, Florida Institute of Technology.

41. Austin, Eric, “Influences of Higher Order Modeling Techniques on the Analysis of Layered Viscoelastic

Damping Treatments,” November 1998, currently Manager, Design and Analysis, CSA Engineering, Albuquerque, NM.

42. Pilkey, Deborah F., “Computation of a Damping Matrix for Finite Element Model Updating,” April 1998,

currently with the Boeing Company, Rocketdyne Division.

43. Gade, Prasad V.N., “Performance Enhancement and Stability Robustness of Wing/Store Flutter Suppression System,” February 1998, currently with Chrysler Corporation, Powertrain Engineering.

44. Lam, Margaretha, “Hybrid Active/Passive Models with Frequency Dependent Damping,” October 1997,

Currently at Rochester Institute of Technology (tenured).

45. Agnes, Gregory, “Performance of Nonlinear Mechanical, Resonant Shunted Piezoelectronic and Electronic Multi Degrees of Freedom Structures,” September 1997, currently at the Jet Propulsion Laboratory.

46. Sciulli, Dino, “Dynamics and Control for Vibration Isolation Design,” April 1997, currently with NSA

47. Pokines, Brett J., “A Substructure Synthesis Formulation for Vibration Isolation,” April 1996, Air Force

Office of Scientific Research

48. Atalla, Mauro, J., “Model Updating Using Neural Networks,” April 1996, currently Vice President United Technologies Aerospace Systems.

49. Johnson, Dexter, “Alternative Operating Modes for Magnetic Bearing Control,” May 1995, currently at

NASA Lewis Research Center.

50. Leo, Donald, “Control of Uncertain Systems Using Convex Models,” January 1995, currently a Professor and Dean, College of Engineering, University of Georgia.

51. Rietz, Ralph, “Dynamics and Control of Thermoelastic Systems,” January 1995, currently at Kodak,

Rochester, New York.

52. Dosch, Jeffrey, “Active Vibration Suppression: Stability and Design in Second Order Form,” September 1994, currently at AVC Instrumentation Division of PCB Piezotronics, Inc.

53. Parker, Gordon C., “Control Techniques for Multibody Flexible Structures Modelled by a Method of

Quadratic Modes,” April 1994, currently a Professor, Department of Mechanical Engineering, Michigan Technological University.

54. Van Nostrand, William C., “Active Constrained Layer Damping Using PZT Actuation,” March 1994,

currently with Northrop/Grumman Aerospace Corporate Research.

55. Slater, Joseph C., “Nonlinear Modal Control,” May 1993, currently a Professor and Dean, Tennessee Tech.

Daniel J. Inman ()

56. Schulz, Mark J., “Eigenstructure Assignment for Mechanical Systems,” April 1993, currently a Professor, University of Cincinnati.

57. Umland, Jeffrey, “Active Damping in Flexible Structures,” October 1990, currently with the Jet Propulsion

Laboratory.

58. Ross, A. D. S., “A Transient Descriptors for Dynamical System,” April 1990, currently with SPAR Aerospace.

59. Minas, Constantinos, “Modeling and Active Control of Large Flexible Structures,” August 1989, currently

with General Electric Corp, Research and Development.

60. Garcia, Ephrahim, “On the Modeling and Control of Slewing Flexible Structures,” August 1989, Professor, Department of Mechanical and Aerospace Engineering, Cornell University, NY (deceased).

61. Cudney, Harley, “Distributed Structural Control Using Multilayered Piezoelectric Actuators,” July 1989,

currently Radiant Falcon Project Officer, US Army Engineer Research & Development Center, Hanover, NH.

62. Bellos, John, “Theoretical and Experimental Analysis of Non Proportional Damping,” March 1989,

currently a Professor, Neapolis University, Paphos, Cypress.

63. Yae, Kwang, “Reduced Order Modeling and Analytical Model Improvement for Structural Dynamics and Control,” July 1987, Vice President of Electronics, Samsung Research and Development, Korea (retired).

64. Zimmerman, David, “Low Authority Control of Large Space Structures with a Constrained Threshold

Control Formulation,” June 1987, Professor of Mechanical Engineering, University of Houston, TX. (deceased).

65. Liang, Zhong, “On Modal Testing in the Time Domain,” February 1987, currently a Professor, Department

of Civil Engineering, University of Buffalo, NY.

66. Wan, K. W., “Analysis and Control of Thermal Instabilities in Structural Components,” September 1986, joint with Professor F. Cozzarelli, currently with Cummings Engines.

67. Ahmadian, Mehdi, “Dynamics and Control of General Linear Lumped- Parameter Systems,” June 1984,

currently a Professor, Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA.

Post Doctoral Research Associates: Gamble, Lawren L.,PhD Unniversity of Michigan 2018, working on bio inspired morphing, 2018 to present Chae, Eun Jung, PhD University of Michigan 2014, Simulation of Morphing Aircraft Using Fluid Structure Interaction Codes. 2016- 2017 Moosavian, Amin, Ryerson University, 2015, Kinematics of Morphing, 2016-2018. Pankonein, Alexander, University of Michigan, 2014, Avian Inspired Morphing, 2015-2016 Hobeck, Jared, D. University of Michigan 2014, worked on metamaterials for vibration suppression, 2014- present Faria, Cassio, PhD, Virginia Tech 2013, worked on hybrid, multifunctional composites, 2013– 2014. Ya Wang, PhD, Virginia Tech 2012, worked on multifunctional composites, 2012- 2013

Daniel J. Inman ()

M. Amin Karami, PhD, Virginia Tech 2011; worked on energy harvesting, 2011-2013 Alper Erturk, PhD, Virginia Tech 2009; worked on energy harvesting, 2009-2010. Mickael Lallart, PhD, INSA Lyon, France, 2009; worked on energy harvesting, 2009. Seung-Hee Park, PhD, KAIST, Korea, 2008; worked on structural health monitoring, 2005-06, 2008-09. Armaghan Salehian, PhD, Virginia Tech, 2008; worked on large space structures, 2008. Benjamin Grisso, PhD, Virginia Tech 2007; worked on structural health monitoring, 2007-2008. T. Michael Seigler, PhD, Virginia Tech 2005; worked on morphing aircraft structures, 2005-2006. Jae-Sung Bae, PhD, KAIST, Korea 2002; worked on morphing aircraft structures, 2002-2004. Gyuhae Park, PhD, Virginia Tech 2000; worked on diagnostics and isolation, 2000-2002. Myung-Hyun Kim, PhD, Virginia Tech 2000; worked on nonlinear control, 2000-2001. Frank Gern, PhD, Virginia Tech 1999; worked on smart wings for UCAVs, 1999-2001. Eric Austin, PhD, Virginia Tech 1998; worked on smart structures, 1999-2000. Chul-Hue Park, PhD, Catholic University of America 1997; worked on smart structures, 1997-1999. Ephrahim Garcia, PhD, SUNY - Buffalo 1989; worked on smart structures, 1989-1992. Zhong Liang, PhD, SUNY - Buffalo 1987; worked on experimental structural control, 1987-1989. Yaakov Oshman, D.Sc. Technion, Israel Institute of Technology 1986; worked on filtering problems for large space structures, 1986-1987. Senior Long Term Visitors: Jae-Sung Bae, PhD, Associate Professor at School of Aerospace and Mechanical Engineering, Korea Aerospace University, January 2012 to January 2013. Filho, Jozue Vieira, Associate Professor, Department of Electrical Engineering, UNESP – Sao Paulo State University, Sao Paulo, Brazil, February 2010 to January 2011. Baptista, Fabricio, Research Scientist, Department of Electrical Engineering, UNESP – Sao Paulo State University, Sao Paulo, Brazil, February 2010 to January 2011. Varoto, Paulo, Professor, University of Sao Paulo, Sao Paulo, Brazil, July 2009 to July 2010. Kim, Myung-Hyun, Professor, Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea, January to December 2009. Ishimura, Kosei, Associate Professor, Institute of Space and Aeronautical Science (ISAS), Japan Aerospace Exploration Agency (JAXA), Kanagawa, Japan, December 2008 to March 2009. Yardimoglu, Bulent, Professor, Department of Mechanical Engineering, Izmir Institute of Technology, Izmir, Turkey, July 2007 to August 2008.

Daniel J. Inman ()

De Marqui, Jr., Carlos, Professor, Department of Materials, Aeronautical, and Automobile Engineering, University of Sao Paulo, Brazil, April 2008 to March 2009. Alhazza, Khaled, Professor, Department of Mechanical Engineering, Kuwait University, Kuwait, August 2006 to August 2007. Albassam, Bassam, Vice Dean for Administrative Affairs, College of Engineering, King Saud University, Riyadh, Saudi Arabia, July/August 2007 and July/August 2008 and July/August 2009. Daghia, Federica, PhD Candidate, University of Bologna, Italy, October 2005 to June 2006. Park, SeungHee, PhD Candidate, KAIST, Korea, September 2005 to August 2006. Morales, Cesar, Professor, Department of Mechanical Engineering, Universidad Simon Bolivar, Venezuela, August 2003-September 2004. Halevi, Yoram, Professor, Faculty of Mechanical Engineering, Technion IIT, Israel, July 2003-May 2004. Kwak, Moon, Professor, Department of Mechanical Engineering, Dongguk University, Korea, July 2003-August 2005. Ghorashi, Mehrdaad, Professor, Department of Mechanical Engineering, Shariff University of Technology, Tehran, Iran, August 2002-September 2003. Adachi, Kazuhiko, Professor, Department of Mechanical Engineering, Kobe University, Japan, October 2001-October 2002. Yoo, Hong Hee, Professor, Department of Mechanical Engineering, Hanyang University, Korea, August 2001-July 2002. Yardimoglu, Bulent, Assistant Professor, Department of Mechanical Engineering, Izmir Institute of Technology, Turkey, June 1-September 15, 2002. Lopes, Vicente, Jr., Professor, Department of Mechanical Engineering, UNESP, Brazil, August 1998-September 2000. Steffen, Valder, Jr., Professor, Federal University of Uberlandia, Brazil, January-December 1999. Friswell, M. I., Senior Lecturer, University of Wales, Swansea, UK, March 1997-August 1997. Starek, Ladislav, Associate Professor and Head, Department of Technical Mechanics, Bratislav Technical Institut, Slovakia, June 1987-November 1989, February 1993-August 1993. Ben Haim, Yakov, Associate Professor, Technician-Israel Institute of Technology, Israel, September 1992-May 1993. Kim, Yong-Chul, Professor, Department of Mechanical Engineering, Beungram University, Gyongsan, Korea, August 1994-July 1995. Huang, Shyh-Chin, Professor, Mechanical Engineering, National Taiwan Institute of Technology, Taiwan, Republic of China, September 1994-August 1995. Dinkler, Dieter, Professor, Aerospace Engineering, University of Stuttgart, Germany, June 1994-October 1994. Current Graduate:

Daniel J. Inman ()

Krystal Acosta, PhD Student, “Pyroelectric Effects in Applications of Macro Fiber Composite Materials” Lori Groo, PhD Student, “Energy Harvesting and Structural Monitoring Using Nano Composites” Kevin Haughn, PhD Candidate, Piper Sigrest, PhD Candidate, Christina Harvey, PhD Candidate, Grants, Contracts, and Gifts:

“EFRI C3 SoRo: Avian Inspired Deformable Structures in Unknown Flows”, National Science Foundation, Jan 1, 2020 to December 31, 2023, $2,000,000. “Brain Inspired Networks for Multifunctional Intelligent Systems in Aerial Vehicles” Air Force Office of Scientific Research (MURI), June 1, 2019 to May 31, 2024, $850,000. AFOSR-FA9550-19-0213 “In Space Demonstration of Submicron Active Optomechanical Control” SBIR Phase 1, Extreme Diagnostics, Inc. (NASA). July 1, 2019 to December 31, 2019 Ford Motor Company, “Application of Macro-Fiber Composite Actuators and Design of Compliant Mechanisms for Vehicle Surface Morphing”, $144,999, 7/1/2016 to 12/31/2018, 100% Extreme Diagnostics, Inc., (STTR Phase II from NASA), “Macro-Fiber Composite-Based Actuators For Space” $360,000, 22 April 2016 to 31 April 2018, 100% Air Force Office of Scientific Research “Avian-Inspired Multifunctional Morphing Vehicles”, $4,686,788, 1 JAN 2016 to 31 DEC 2020, 25% Extreme Diagnostics, Inc., (STTR Phase II from NASA), “Compact Energy Conversion Module” $360,000, 1 April 2015 to 31 March 2017, 100% Extreme Diagnostics, Inc., (SBIR Phase I from NASA),” Macro‐Fiber Composite-based actuators for space”, $40,000, 17 June 2015- 17 December 2015. 100% Extreme Diagnostics, Inc., (STTR Phase III from NASA), “On-Orbit Validation System For Space Structure Composite Actuators”, $30,000, 11 AUG 2015 – 10 OCT 2015 Air Force Office of Scientific Research, “Electronic Damping in Multifunctional Material Systems", $744,538, 1 September 2014 to 31 August 2018, 100%. Extreme Diagnostics, Inc., (STTR Phase I from NASA), “Compact Energy Conversion Module”, $60,000, 06/20/2014 to 01/15/2015, 100%. Extreme Diagnostics, Inc., (SBIR Phase I from NASA), “On-Orbit Validation System For Space Structure Composite Actuators”, $40,000, October 21, 2013 to November 22, 2013, 100% Office of Naval Research, “DURIP: Digital Particle Image Velocimetry System,” $294,740, June 15, 2011 to June 14, 2012, 50% (with S. Priya of CIMSS). Pratt and Whitney, “Spring Loaded / PZT Actuated System,” $116,282, April 1, 2011 to December 31, 2011, 100%. NASA Space Technology Research Fellowships (NSTRF), “Modeling Cable Harness Effects on Spacecraft Structures,” $66,000, August 1, 2011 to July 31, 2012, 100%. The Boeing Company, “Piezoelectric Fiber Composite and Macro Fiber Composite Evaluation,” August 3 to December 22, 2011, $123,416, 100%.

Daniel J. Inman ()

Texas MicroPower, Inc., “NSF SBIR: Novel Broadband NEMS Energy Harvesters for Low-Frequency Vibration Environments and Applications,” $31,640, January 1 to September 30, 2011, 100%. Virginia Space Grant Consortium, “AGR Fellowship (Spak): Modeling Cable Harness Effects on Spacecraft Structures,” $5,000, May 16, 2011 to May 15, 2012, 100% University of Michigan, “NSF Project in Micromechanics with Goulbourne,” $76,128, November 25, 2009 to August 31, 2011, 100%. National Science Foundation, “An International Workshop on Smart and Resilient Transportation Infrastructure,” $25,000, January 2011 to June 2012, 25% (with L. Wang of CEE). (1066168) Luna Innovations, Inc., “SBIR: Laser Vibrometer PFC Health Monitoring System,” November 1 to December 31, 2010, $1,000, 100%. Center for Energy Harvesting Materials and Systems (SAIC Seed Grant), “Energy Harvesting from River Flow,” $37,500, March 1, 2011 to February 28, 2012, 100%. National Science Foundation, “NSF/DOE Thermoelectrics Partnership,” $1,498,987, October 1, 2010 to September 30, 2013, 25% (with S. Huxtable of ME, S. Ekkad of ME, and S. Priya of CEHMS). (1048708) Air Force Office of Scientific Research, “Structural Dynamics of Cable-Harnessed Spacecraft Structures,” $510,464, August 1, 2010 to July 31, 2013, 100%. Extreme Diagnostics, Inc., “Ultra Low Power and Embeddable Blade-Condition Monitor (DoE Phase I),” $30,000, June 19, 2010 to March 18, 2011, 50% (with Dong Ha of ECE). Air Force Office of Scientific Research, “DURIP: Multi Axis Characterization for Energy Harvesting, Sensor Nodes and Multifunctional Composites,” $313,950, June 15, 2010 to June 14, 2011, 50% (with S. Priya of CIMSS). National Science Foundation, “IUCRC CGI: Center for Energy Harvesting Materials and Systems (CEHMS),” $525,000, August 1, 2010 to July 31, 2015, 50% (with S. Priya of CIMSS). (1035042) Air Force Office of Scientific Research, “AFOSR Tri-Service Workshop on Mechanical Energy Harvesting,” $20,000, August 1, 2009 to March 31, 2010, 100%. Extreme Diagnostics, Inc., “NASA SBIR Phase I in Adverse Event Detection,” $31,000, January 10, 2010 to August 9, 2010, 50% (with Dong Ha of ECE). National Science Foundation, “NSF Support of 9th International Seminar on Experimental Techniques and Design in Composite Materials (ETDCM9),” $5,000, September 15, 2009 to February 28, 2010, 100%. (953482) Air Force Office of Scientific Research, “Simultaneous Vibration Suppression and Energy Harvesting,” $602,911, August 15, 2009 to August 14, 2013, 100%. FA9550-09-1-0625 AVID, LLC, “Phase II STTR – Reduced Order High Fidelity Models for Signature Propagation,” $378,907, January 14, 2010 to January 13, 2012, 50% (with R. Burdisso of ME). Texas A&M University, “AFOSR MURI: Synthesis, Characterization and Modeling of Functionally Graded Multifunctional Hybrid Composite Materials for Extreme Environments,” $1,050,082, September 1, 2009 to August 31, 2014. Air Force Office of Scientific Research, “AFOSR Support of International Conference on Composite Materials (ICCM-17),” $21,890, April 1, 2009 to November 30, 2009, 100%.

Daniel J. Inman ()

National Science Foundation, “I/U CRC Planning Grant – Center for Energy Harvesting Materials and Systems (CEHMS), $10,000, January 1, 2009 to January 31, 2011, 50% (with S. Priya of CIMSS, D. Ha of ECE, D. Leo of CIMSS, and R. Mahajan of ICTAS). (856032) Acellent Technologies, “NIST TIP: Development of SCANSn for Advanced Health Management of Civil Infrastructures,” $240,000, January 1, 2009 to December 31, 2013, 100%. Physical Acoustics Corporation, “NIST TIP: Self-Powered Wireless Sensor Network for Structural Health Prognosis,” $1,558,596, February 1, 2009 to January 31, 2013, 50% (with S. Priya of CIMSS). Railway Technologies Laboratory, “Automated Switch Bolt Detection,” $50,000, January 1, 2008 to December 31, 2018, 100%. AVID, LLC, “Phase I STTR – Reduced Order High Fidelity Models for Signature Propagation,” $59,996, September 10, 2007 to July 1, 2008, 50%. The North Face, “Energy Harvesting Materials for Tents – a Senior Design Project,” $2,000 donation received March 25, 2008, 100%. Office of Naval Research, “MURI: Jellyfish Autonomous Node and Colonies,” $3,653,235, May 1, 2008 to April 30, 2013, 25% (with S. Priya of CIMSS, D. Viehland of MSE, and D. Leo of CIMSS). Extreme Diagnostics, Inc., “NASA SBIR: Crucial Component Damage Detection, Monitoring, and Mitigation,” $28,600, January 18 to July 21, 2008, 100%. Extreme Diagnostics, Inc., “NASA SBIR: Three-Dimensional Health Monitoring of Sandwich Composites,” $28,600, January 18 to July 21, 2008, 100%. Extreme Diagnostics, Inc., “NSF STTR: Reconfigurable Sensors for Autonomic Monitoring Across Frequency and Length Scales,” $75,000, July 1, 2007 to June 30, 2008, 50%. Virginia Tech College of Engineering, “International Center for Smart Materials and Systems,” $10,000, July 1, 2007 to May 15, 2008, 100%. Virginia Space Grant Consortium, “AGR Fellowship (Murphy): Active Control Inceptors Using Smart Material Motion Control,” $5,000, May 16, 2007 to May 15, 2008, 100%. Virginia Space Grant Consortium, “AGR Fellowship (Anton): Energy Harvesting for Unmanned Aerial Vehicles,” $10,000, May 16, 2007 to May 15, 2009, 100%. Virginia Tech Research Division, “International Travel Supplemental Grant,” $1,000, April 18 to May 18, 2007, 100%. Arizona State University, “Air Force MURI on Structural Health Monitoring,” $628,514, May 1, 2006 to September 30, 2011, 100%. Barron & Associates, “Scalable Approaches to Integrated Flight and Planform Control of Morphing Air Vehicles (AF SBIR Phase II),” $70,000, November 15, 2005 to September 17, 2008, 100%. Stirling Dynamics, Inc., “Army SBIR Phase II – Incorporating Smart Materials,” $100,003, September 22, 2006 to September 22, 2008, 100%. AVID, LLC, “AF SBIR Phase II – Smart Material Concepts for Ducted-Fan Vehicles,” $100,316, May 1, 2007 to April 30, 2009, 100%.

Daniel J. Inman ()

Acellent Technologies, Inc., “Phase II Energy Harvesting,” $50,000, August 15, 2006 to November 30, 2007, 100%. Techsburg, Inc., “AF BAA – Morphing Tip Control Effectors For Supersonic Tailless Aircraft Using Shape Memory Alloys,” $50,000, March 1, 2006 to January 31, 2007, 100%. University of Washington, “Multi-Mode Energy Harvesting for ISR/MAV Missions,” $660,834, May 1, 2006 to December 31, 2011, 100%. AFOSR, “Structural Mechanics for Adaptive Optics,” $327,981, February 15, 2006 to November 30, 2008, 100%. Virginia Space Grant Consortium, “AGR Fellowship (Allison): Proper Orthogonal Decomposition for Model Reduction of Nonlinear Structural Systems,” $10,000, August 10, 2006 to August 9, 2008, 100%. Extreme Diagnostics, Inc., “NASA Phase II: On-Orbit Health Monitoring and Repair Assessment of Thermal Protection Systems,” $200,000, December 2, 2005 to December 2, 2007, 100%. Techsburg, Inc., “Fast-Response Shape Memory Alloy Control Surfaces For Hypersonic Munitions,” $38,722, August 1, 2005 to June 14, 2006, 100%. Railway Tech Laboratories, “Broken Rail Detection Using Smart Materials and Impedance,” $27,000, July 1, 2005 to June 30, 2007, 100%. Virginia Space Grant Consortium, “AGR Fellowship (Grisso): Developing a Wireless Active Sensing System for Impedance-Based Structural Health Monitoring,” $15,000, August 10, 2005 to August 9, 2008, 100%.

Virginia Space Grant Consortium, “AGR Fellowship (Tarazaga): Dynamics and Control of Inflatable Satellite Booms Using Active Materials,” $15,000, August 10, 2005 to August 9, 2008, 100%. Extreme Diagnostics, Inc., “On-Orbit Health Monitoring and Repair Assessment of Thermal Protection Systems,” $15,000, January 21, 2005 to July 18, 2005, 100%. CANEUS, “The Cutting Edge: Multifunctional Composite Materials With MNT Embedded Sensors,” $34,988, July 1 to December 31, 2004, 100%. NanoSonic, Inc., “Self-Assembled Integrated Sensor/Actuator Networks (DARPA SBIR Phase I),” $10,000, June 30, 2004 to February 28, 2005, 100%. RECON Optical, Inc., “Advanced Passive Isolation Concepts and System Modeling,” $25,500, June 1, 2004 to March 15, 2005, 100%. NASA, “GSRP Fellowship: Macro-Fibre Composites for Structural Control,” $48,000, July 1, 2004 to June 30, 2006 (100% for P. Tarazaga). NSF, “Self-Contained Intelligent Sensors for Structural Monitoring,” $290,000, August 1, 2004 to August 31, 2008, 100%. (426777) National Institute of Aerospace (DARPA), “Research on Mathematical and Computational Tools for Analysis, Design, Control and Optimization of Very Large Structures with Advanced Material Models,” $2,298,142, October 1, 2003 to September 30, 2007, 19% (with J. Burns, E. Cliff, and T. Herdman of ICAM). U.S. Army Research Office, “The 15th International Conference on Adaptive Structures and Technologies (ICAST 2004),” $20,000, June 6, 2004 to May 15, 2005, 100%. National Science Foundation, “REU Supplement: Updating for Model-Based Simulation,” $6,000, April 1, 2004 to August 31, 2005, 100%.

Daniel J. Inman ()

Honeywell Space Systems, “Active Thin Films for Antenna Applications,” $10,000, received January 5, 2004. Global Contour, Inc. (AF STTR), “Wireless Technology for Structural Health Monitoring,” $33,000, November 1, 2003 to June 30, 2004. Extreme Diagnostics, Inc. (AF STTR), “MEMS-Augmented Structural Sensor (MASSpatch) for Wireless Health Monitoring,” $35,000, September 2, 2003 to June 6, 2004. AFOSR, “Vibration Analysis and Control of an Inflatable Structure Using Smart Materials,” $234,498, April 1, 2003 to March 31, 2006, 100%. National Science Foundation, “REU Supplement: Updating for Model-Based Simulation,” $10,000, April 1, 2003 to August 31, 2005, 100%. NASA, “GSRP Fellowship: Identification and Control of Solar Sail Dynamics,” $72,000, July 1, 2003 to June 30, 2006 (100% for H. Sodano). Air Force Research Laboratory, “Experimental Characterization of the Dynamics of a Self-Rigidizing Torus,” $138,762, June 24, 2003 to September 30, 2004, 100%. Honeywell International, “Dynamics and Control of SPIDER Membranes Using Smart Materials,” $20,000, October 16, 2002 to June 30, 2003, 100%. Her Majesty’s Government Communications Center, “Power Harvesting Using Smart Materials,” $68,000, June 1, 2002 to August 31, 2005, 100%. Carilion Biomedical Institute/OSER, “MEMS Acoustic Sensors for Osteoporosis,” $20,000, July 1, 2002 to June 30, 2004, 50% with R. O. Claus. National Science Foundation, “REU Supplement: Self-Monitoring and Self-Repairing Structural Systems,” $12,500, April 1, 2002 to August 31, 2004, 100%. National Science Foundation, “International Supplement (Tunisia): Self-Monitoring and Self-Repairing Structural Systems,” $4,800, August 1, 2002 to August 31, 2005, 100%. Honeywell Space Systems Glendale, “Lightweight Inflatable Structures,” $20,000, January 1, 2002 to March 31, 2002, 100%. Virginia Space Grant Consortium, “Smart Materials and Nanotube Actuation for Vibration Control,” $15,000, August 1, 2002 to July 31, 2005 (100% for Eric Ruggiero). NASA Langley Research Center, "Manufacturing, Characterization and Applications of Piezo-Fiber Composite Actuators (GSRP Program)," $48,000, July 1, 2002 to June 30, 2004 (100% for R. Brett Williams). NASA Marshal Space Flight Center, "Development of Self-Monitoring and Self-Healing Bolted Joints (GSRP Program)," $70,000, July 1, 2001 to June 30, 2004 (100% for Dan Peairs). National Science Foundation, “Magnetic Actuators for Non-Destructive Evaluation (NDE) of Rotating Machinery for Health Diagnostics and Prognostics,” $324,999, October 2002 to January 2006, 30% with M. Kasarda and G. Kirk. (219701) National Science Foundation, “Pan American Advanced Studies Institute in Damage Prognosis,” $79,821, October 1, 2002 to March 31, 2005, 100%. (221222) National Science Foundation, “Updating for Model-Based Simulation,” $225,000, September 1, 2002 to August

Daniel J. Inman ()

31, 2005, 100%. Los Alamos National Laboratory, “Damage Prognosis: An Integration of Scales from Macro to FEM for Computational Studies,” $297,454, January 8, 2002 to September 30, 2004, 100%. Air Force Office of Scientific Research, “Vibration Analysis and Control of an Inflatable Structure Using Smart Materials,” $234,498, April 1, 2003 to March 31, 2006, 100%. NASA/DARPA, “Flight Control of Morphing Aircraft Structures,” $504,087, January 1, 2003 to December 31, 2006, 100%. NASA “Integration of Macro Fiber Composites into the Dynamics and Control of an Inflated Torus”, NASA Langley Research Center, $40,000, June 16, 2001 to June 15, 2002, 100%. NASA Marshall Space Flight Center, "Development of Self-Monitoring and Self-Healing Bolted Joints (GSRP Program)," $70,000, July 1, 2001 to June 30, 2004 (100% for Dan Peairs). National Science Foundation, “Self-Monitoring and Self-Repairing Structural Systems,” $223,840, October 1, 2001 to September 30, 2004, 100%. (120827) Air Force Office of Scientific Research, "Dynamics and Control of Inflated Satellite Components (DURIP)," $75,746, April 1, 2001 - August 1, 2002. National Science Foundation/Clemson University, “Modeling Viscoelastic Damping in Civil Structures,” $199,718, October 1, 1999 to September 30, 2002, 50% with Eric Austin. (9978752) Bekey Designs, Inc., “Mechanics of Smart Membranes,” $38,000, March 30, 2000 to December 31, 2000, 100%. Virginia Space Grant Consortium, “Experimental and Analytical Methods to Ascertain the Effects of Piezopolymer Actuators on the Dynamics of Inflatable Space-Based Structures,” $15,000, August 10, 2000 to August 9, 2003 (100% for R. B. Williams). Air Force Office of Scientific Research, “Distributed Modeling and Control of Adaptive Wings,” $641,077, July 15, 1999 to July 14, 2002, 100%. Air Force Office of Scientific Research, “Smart Structures for Vibration Suppression of Optical Surfaces,” $299,002, April 1, 1999 - March 31, 2002 (F49620-99-1-0231). U.S. Army Research Office DURIP, “Temperature Properties of Smart Damping Materials,” $99,522.50, March 1, 1999 - February 29, 2000 (DAAD-19-99-1-0104) Office of Naval Research, “Shape Memory Actuators for Tab-Assisted Control Surfaces,” $30,000, June 1, 1999 to February 29, 2000, 100%. Office of Naval Research, “Analysis and Report on SD2000: A Workshop to Determine Structural Dynamics Research for the Millennium,” $15,000, March 17 - December 31, 1999 (N00014-99-1-0703). American Society of Mechanical Engineers, Editor, Journal of Vibration and Acoustics, approx. $11,000, July 1999 - December 1999, 100%. U.S. Army Research Office, “First ARO Workshop on Novel Damping Concepts and Materials,” $10,000, May 15, 1998 - February 14, 1999 (DAAG-55-98-1-0249). NASA Langley Research Center, “Principles of Piezoceramic Devices,” $84,000, February 1, 1998 - January 31, 2000 (NAG-1-1998).

Daniel J. Inman ()

MCEER State University of New York - National Science Foundation, “Inventory and Advanced Technology Review,” $205,000, October 1, 1997 - August 31, 2000 (R92517; 98-0201). Air Force Office of Scientific Research, “11th VPI&SU Workshop on Structural Dynamics and Control,” $10,000, May 1 - December 31, 1997 (F49620-97-1-0303). National Science Foundation, “11th VPI&SU Workshop on Structural Dynamics and Control,” $5,000, April 1997 to March 1998. (9708122) U.S. Army Research Office, $10,000, “3rd ARO Workshop on Smart Structures,” August 1 - December 31, 1997. Office of Naval Research, “Nonlinear Active Control of Dynamical Systems,” Part of Prof. A. Nayfeh's MURI, June 30, 1996-2001; (Inman share about $50,000 per year). National Science Foundation, “Vibration Control of Nonlinear Thermoviscoelastic Plates with Embedded PZT Sensors and Actuators,” $199,954, October 1, 1997 - September 30, 2000 (50% joint with R. C. Batra) (CMS-97-13453-0001). U.S. Army Research Office, “Modeling Damping in High Performance Vehicle Systems,” $235,000, January 28, 1998 - October 28, 2000 (50% joint with R. C. Batra) (DAAG-55-98-1-0030). Air Force Office of Scientific Research, “Variable Store Flutter Suppression,” AASERT, $120,000, May 15, 1995 to May 14, 1998. Air Force Office of Scientific Research, “Fluid Structure and Control Interaction,” $200,000, May 1, 1995 to April 30, 1998 (F49620-95-1-0367). U.S. Army Research Office, “Diagnostics,” Portion of Prof. C. A. Rogers' URI in Smart Materials, Structures and Mathematical Issues for Active Damage Control, $150,000, July 1, 1994 – June 30, 1997. Air Force Office of Scientific Research, “Parameter Identification,” Part of Professor J. A. Burn's MURI, “Center for Optimal Design and Control,” $150,000, May 1993 to May 1998. National Science Foundation, “Model Correction Using Experimental Data,” November 1, 1991 to October 31, 1994, $190,000 (MSS-9021989 and 9396083). U.S. Army Research Office, “Programmable Materials and Structures,” $421,633, March 1, 1991 - December 28, 1994 (joint with E. Garcia) (DAAL-0-391-G0063). Air Force Office of Scientific Research, “Modeling and Control of Intelligent Flexible Structures,” $233,643, January 1, 1991 - December 31, 1993 (AFOSR-91-0181). National Aeronautics and Space Administration, “Vibration Suppression on the Evolutionary Model,” $180,000, October 1, 1990 - September 30, 1993 (NAG-1-1187). Air Force Office of Scientific Research, “Modeling, Estimation and Control of Distributed Parameter Systems,” September 89 to September 1992, $1,200,000, awarded through University of Southern California, (joint with H.T. Banks and K. Ito). National Aeronautics and Space Administration, “Sensor and Actuator Modeling,” July 1, 1989 - June 30, 1990, $19,371. Air Force Office of Scientific Research DURIP, “Control Structure Interaction Instrumentation,” January 1988, $44,923. (AFOSR-88-450-0390)

Daniel J. Inman ()

Air Force Office of Scientific Research, “Analytical and Experimental Modeling and Control of Flexible Structures,” November 1987 to October 1990, $540,000, joint with D. J. Mook, R.W. Mayne and N. Mani (F4962088C0018). National Aeronautics and Space Administration (Langley Research Center), “Active Suspension System,” July 1987 to August 1990, $136,000 (NAG 1785, NGT 70030, NGT 70031). National Science Foundation, Presidential Young Investigator Award, “Vibration and Control of Mechanical Structures Under Dynamic Loading,” August 1984 to July 1990, $337,500 (MSM 835 1807). Cost-sharing for NSF PYI: $17,500 Cincinnati Milacron Corp., “Machine Tool Research” $20,000 Firestone Tire and Rubber Co., “Damping in Composites” $25,000 Harrison Radiator Division of General Motors “Noise Control” $15,000 Harris Corp., “Optimal Projection Algorithms” $20,000 Harrison Radiator Division of General Motors, “Modal Testing of Compressors” $17,500 Harrison Radiator Division of General Motors, “Testing and Analysis of Compressor Vibration” $75,000 Occidental Chemical Company, donation of EAI 2000 Computer “Simulation Studies” $10,000 Moog, Inc., “Optimal Control of Multiple Thruster Projectiles” Department of Defense Equipment Program “Laser Sensing System for Identification of Flexible Structures,” $110,000 January 1987-January 1988 (AFOSR 87 0099). National Aeronautics and Space Administration (Langley Research Center), “System Identification and Slewing,” August 1984 to December 1989, $84,000 (NGT-33 183 804). Air Force Office of Scientific Research, University Research Initiative Program, “Control of Distributed Parameter Systems,” $2,999,999, September 15, 1986 to September 1, 1989, awarded through Brown University (joint with H.T. Banks, C.M. Defermos, W.H. Fleming and D. Gottlieb) (AFOSR-F49620-86-6-0111). Department of Defense Equipment Program, “Digital Control of Flexible Structures,” January 1985-January 1986, $101,000 (AFOSR 85-0119). National Aeronautics and Space Administration (Langley Research Center), “Digital Control of a Beam with a Joint,” September 1984-August 1988, $69,000. (NGT 33183802) National Science Foundation, “A Workshop on Modeling Control of Systems Governed by Partial Differential Equations,” August 1986 to January 1988, $42,000. (ESC 8606287) Air Force Office of Scientific Research, “Qualitative Results for Distributed Systems with Discrete Damping and Stiffness with Application to Control,” June 1982 to June 1988, $232,294. (AFOSR 85 0220) National Aeronautics and Space Administration (Langley Research Center), “Actuator Control Research,” May 1983 to May 1987, $66,000. (NGT 33183801) National Science Foundation, “Analytical Study of Gyroscopic Systems with Application to Slightly Damped and Elastically Supported Dynamically Tuned Gyros,” September 1981 to February 1984, $63,406. (8112826) SUNY Research Foundation Summer Grant, “Design of Wind Turbine Drive Trains,” June 1981 to September 1981, $2,700.

daniel j. inman harm buning collegiate professor · daniel j. inman (page 4) chair of 15th biennial...

Documents