cpu and its execution of instruction
TRANSCRIPT
Disclaimer: This presentation is prepared by trainees of baabtra as a part of mentoring program. This is not official document of baabtra –Mentoring PartnerBaabtra-Mentoring Partner is the mentoring division of baabte System Technologies Pvt . Ltd
CPU AND ITS EXECUTION OF INSTRUCTION
Jaseena A [email protected]/Jaseena
Muhammed A Ptwitter.com/usernamein.linkedin.com/in/profilename9539443588
WHAT IS CPU?
Central Processing Unit
Brain of every computer
Two main components: - ALU
- Control unit
COMPONENTS OF CPU
ALU -Arithmetic and Logical Unit
-Performs all arithmetic and logical operations.
Control Unit
- Extracts instruction from memory, decodes and executes them
- Calls ALU whenever necessary.
REGISTERS
Registers are temporary memory units that store words.
The registers are located in the processor, instead of in RAM.
Some registers are PC, AC, IR, Index register, AMASK, MAR, and MDR, General purpose register, Data register and Process status register.
Program Counter: Stores the address of the macro instruction currently being executed.
Accumulator: Stores a previously calculated value or a value loaded from the main memory.
Instruction Register: Stores a copy of the instruction loaded from main memory (Instruction being executed currently).
REGISTERS(CONTD..)
REGISTERS(CONTD..)Address Mask: When the CPU needs to know the
address of a target word that an instruction is using, the AMASK is AND'ed with the instruction to eliminate the opcode, leaving only the desired address.
Memory Address Register: This register contains the address of the place the CPU wants to work with in the main memory. It is directly connected to the RAM chips on the motherboard.
REGISTERS(CONTD….) Process status register:
This register contains the various information about the cpu.
Data register:A register used in microcomputers to temporarily store data being transmitted to or from a peripheral device.
General purpose registers:-A general purpose register is a memory cell.-Each general purpose register has a unique name-It is used to store intermediate result of complex computation
REGISTERS(CONTD…) MDR(Memory data register)
-It is the register that contains the data to be stored in the computer storage or data after a fetch from the computer storage.-It acts like a buffer and holds anything that is copied from the memory ready for the processor to use it,
Index register:-A hardware element which holds a number that can be added to (or, in some cases, subtracted from) the address portion of a computer instruction to form an effective address. -An index register in a computer's CPU is a processor register used for modifying operand addresses during the run of a program.
HOW CPU COMMUNICATES?
Pathway that interconnect CPU to all the other components on the motherboard
Two types:
-Internal
-External The lines or pins of a bus are of three types: -Data
-Address
-Control
SYSTEM BUS
Address - the components pass memory addresses to one another over the address bus.
Control - used to send out signals to coordinate and manage the activities of the motherboard components.
Data - transferred between peripherals, memory and the CPU. Obviously, the data bus can be a very busy pathway.
SYSTEM BUS(CONTD..)
INSTRUCTION
Single operation of a processor defined by the processor instruction set.
An instruction has two components:
opcode operand
Eg: ADD Ro 100
INSTRUCTION TYPES Instructions can be divided into six groups:
-Data transfer eg: MOV, LOAD
-Arithmetic eg: ADD, SUB, DIV
-Logical eg: AND, OR, NOT
-System-control eg: STOP
-I/O eg: IN and OUT
-Program Control
Program control can be divided into:
-Unconditional Branch eg:JMP NEXT % Jump to the label NEXT
-Conditional Branch
eg: JZ LABEL % jump to label if current value in AC is ZERO -Subroutine call eg: CALL SUB
-Interrupt handling eg:TRAP
INSTRUCTION TYPES
INSTRUCTION CYCLE
1. Load the address of next instruction in the PC into the MAR.So that the control unit can fetch the instruction from the right part
of the memory.2. Copy the instruction/data that is in the memory address
given by the MAR into the MDR.MDR is used whenever anything is to go from the CPU to main
memory, or vice versa. 3. Increment the PC by 1.
So that it contains the address of the next instruction, assuming that the instructions are in consecutive locations.
4. Load the instruction/data that is now in the MDR into the IR.Thus the next instruction is copied from memory -> MDR -> IR.
1.FETCH
2.DECODE
1. Contents of IR split into operation code and address if present e.g. store, add or jump instructions.
2. Decode the instruction that is in the IR
3.EXECUTE• If the instruction is a jump instruction then
Load the address part of the instruction in the IR into the PC.
• If the instruction is an input / load (directly) instruction then
take data input and place in accumulator.
• If the instruction is a load (from memory) instruction.Copy address part of the instruction (to load from) in the IR into MAR.Copy data from memory address held in MAR to MDR.Copy data in MDR into accumulator
• If the instruction is a store instruction then:Copy address part of the instruction (to store in) in the IR into
MAR.Copy data in accumulator to MDR.Copy data in MDR into memory address held in MAR.
• If the instruction is arithmetic then:Copy address part of the instruction (of number to perform
arithmetic operation) in the IR into MAR.Copy number from memory address held in MAR into MDR.Perform operation to number in accumulator (accumulator will
now hold the result).
EXECUTE(CONTD..)
• If the instruction is an output (from memory) instruction then:
Copy address part of part of the instruction (of data to output) in IR into MAR.
Output contents of MDR.
EXECUTE(CONTD…)
4.STORE THE OUTPUT
Result of calculations in cpu stored in main memory or sent to output devices.
Program Counter could be updated to a new address
AN EXAMPLE
If this presentation helped you, please visit our page facebook.com/baabtra and like it.
Thanks in advance.
www.baabtra.com | www.massbaab.com |www.baabte.com
Contact Us
Emarald Mall (Big Bazar Building)Mavoor Road, Kozhikode,Kerala, India.Ph: + 91 – 495 40 25 550
NC Complex, Near Bus StandMukkam, Kozhikode,Kerala, India.Ph: + 91 – 495 40 25 550
Start up VillageEranakulam,Kerala, India.
Email: [email protected]