courses at e zone

CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

FOREWORD

ezone is a technical center conducts training programmes on Basics of electronics, PCB Designing and

Manufacturing Microcontrollers, Embedded systems, RTOS, Robotics , VLSI & Tools ,MATLAB & Tools.

The training programmes are designed in such way that it fills the gap between Engineering

Undergraduates and the companies basic requirement standards as we follow “Learning by Doing

Approach” which proved many of our students got placed in HCL, Flextronics, Foxconn, HTC, ALCATEL

etc.

These programmes suits well for Engineering Students ,freshers & Working Professionals which are

carefully designed by Professors, Industrial experts had an experience more than 20 years.

Signed MoU For Technical Supports: Bois Technologies, Chennai & Tenet Technologies in Bangalore.

Clients : Arja Powertronix, IEEE Pro, Ubisense Technologies , Asqur Embedded Solutions, Abe

Technologies.

About ezone Technical Team:

Our Engineering Services team contains a proper mixture of Latest technical Expertised people as well as

Industrial Experts who contributes for Research and Development Activities of ezone and its services.

All of Our Faculties are post graduates in VLSI, Embedded Systems, Image Processing published their

technical innovations into Conferences and working on Implementing them for End user Satisfaction.

We have tie ups with people from Corporate sectors for enhancing students knowledge on IT Industry.


Regular Courses:

I. Basics of electronics , PCB Designing (Mini Project Training)

II. Embedded Systems Design (8051, PIC, ARM, ARDUINO)(Major Project Training for

Undergradutes/Freshers)

III. Robotics (for Undergradutes/ Freshers/ Experiences Professionals)

IV. Internship and In-plant Training for 20 hours

V. VLSI - STERLING Tool, RTOS, MEMS, FPGA (for PostGraduates/ Freshers/ Experienced

Professionals)

Special Courses:

In Electronics:

MEMS, OPNET, NS2, VLSI, Matlab, VHDL .

In IT:

Oracle, Android & Enterprise Mobility, .Net


MINI PROJECT TRAINING

Objective: Basics of Electronics course aims at making students understand on how a simple board can

be converted into a electronic appliance through the means of understanding basic blocks of electronics,

different electronics components and designing

Features:

a. Science students & Engineering students who like to start the basic designing of electronic

circuitries can undergo this course.

b. Here students begin learning through practical exposure which is the foremost requirements for

companies and industries.

c. Learns the complete process cycle from Basic Understanding of Components

d. Student can start doing their own Undergraduate Mini projects with this Course level knowledge.

Course Content:

Overview of Basic Energy Concepts and Material Science

Basics on Active and Passive Components, Inverters, Rectifiers, Relays, Various types of Cables ,

Connectors, Diodes, LED, IC-741, IC-555 timer, Filters

Working with AC Circuits, DC Circuits, Semiconductor Devices, Power Electronics

Working with Multivibrators, Oscillators, IR Sensor, Gas Sensor, Load Sensor, Pressure Sensor,

Ultrasonic Sensor etc.

Working with LED Displays, Seven Segment Displays, LCD Display

Working with Buzzer, Gear Motor, Stepper Motor, Relay tripping Boards

Soldering Techniques and Basics of PCB

Constructing 5 Practical Real time projects

1.) Construction of Water Level Controller for Overhead water tanks in home

2.) Design of a Soil Moisture testing and Cultivating Robot

3.) Design of a Traffic Signal Controller

4.) IR Sensor Based Parking Timer

5.) Automatic Braking System Using Ultrasonic Sensor

Duration: 5 Days (40 Hours)

Fees: Rs.4000/ Head


PCB DESIGNING

Objective:

In PCB Designing course students are encouraged to design the layout of an electronic circuit, with

various active and passive components.

Features:

a. Students learn about Designing, Simulation processes such as Routing, GERBER File Generations

and Components Soldering.

b. Provide the exposure on different kinds of PCB Designing and their practical requirements in

Industry.

c. Exposed to testing of Fabricated PCBs and Detecting faults on Solder joints which could be quite

helpful for the students while they are trying to get in Electronics PCB Layout and testing

Industries.

Course Content:

PCB Layouts for electronic circuits using Micro controller, IC, Transistors, Diodes, Active and

Passive components, Switches and connectors.

Schematic Designing

Design Checking

Placing and Routing of components

Higher Level Details on Interference, Heat dissipation on PCBs

Manual Layout using Inch Graph and Software Layout

Generation of Net List, Part List, Pin List

Soldering and technical preventive measures

Testing of Fabricated PCB

Working on 3 Real time projects through PCB

1.) Designing of PCB Board using Manual Layout for Water Level Controller Project

2.) Designing of PCB Board using Software Layout for Water Level Controller Project

3.) Construction of a Robotic MotherBoard through Placing, Routing, Layout, Soldering.

Duration: 2 Days

Fees: Rs.750 /Head


ROBOTICS

Objective : Robotics is a branch of artificial intelligence which are now widely used in factories to

perform high-precision jobs such as welding and riveting and works which are dangerous for humans.

This course helps students to learn about Dynamics, Kinematics, Robotic Mechanisms, Robotic Electronic

building blocks, Intelligent controlling Logics, Artificial Intelligence etc.

Features:

a. Knowledge on Embedded Robotics, Fire sensing, Gas sensing, Track Follower, Pick & Place, To

and Fro Robots & Wireless networking

b. Students are encouraged to try the basics of electronics, PCB Designing and Embedded Systems

Designs into the Robot with Artificial intelligence

c. Certifications are provided only after implementation of a Real time Robotic project

Course Content:

Introduction to Robotics

Mechanical Energies and Dynamic Forces

Various types of Motors

Normal and Self-sustainable Batteries and Power supplies of a Robot

Required electronic components (For Selected types of Robots only)

Soldering on PCB

Microcontroller based Robots with Display

Interfacing Sensors and Beepers

Interfacing Servo Motor

Directions and Braking Mechanisms

Construction of Practical Real time Robots

1.) Construction of a Tanker Robot for Military Applications

2.) Construction of Security Robot for Remote Monitoring

3.) Crop Cultivation through Moisture Sensing Robot

Duration: 3 days

Fees: Rs .2747 / Batch of 3 members


MATLAB

Objective : It just came as binary 0s and 1s but now it had made every Signal Processing Applications to

rely on it. With this tool it finds application in Images, Signal Processing, Fuzzy Logic, Neural Networks,

DSP etc.

Features:

Courses handled by Industrial Experts and Experienced Professionals with live exposure.

Clear and Practical Handson Based Concepts explanation

Video Lectures are also provided for further reference

IMAGE PROCESSING

Course Content:

Working with Matlab Software

Desktop tools and development Environment

Matlab operators, Elementary operators, Arrays and Manipulation

Plotting, Annotating

Printing and Exporting

Mesh plots, Data Analysis and Visualization

Basic Programming , GUI, Fuzzy Logic

Error Handling

Basic operations on images such as Reading, writing, Display

Spatial transformation, Analysis and enhancement

Morphological and Edge detection

Linear Filtering

Image Transformation and Image Acquisition

Watermarking and Cryptography

Application of ROCs and Edge Detection through Kernels

Duration: 2 days .

Fees: Rs. 500 per student


SIMULINK

Objective:

The objective of this course is to get familiar with Basic Building blocks, Electrical system Design

Features:

Courses handled by Industrial Experts and Experienced Professionals with live exposure.

Clear and Practical Handson Based Concepts explanation

Video Lectures are also provided for further reference

Course Content:

introduction to MATLAB SIMULINK

Hands on with Basic Building Blocks

Introduction to Electrical system

Design of Basic Electrical Circuit

Design of Basic circuits using SCR,MOSFETS,IGBT

Design of various Rectifiers & converters

Design of chopper circuit

Pulse Width Modulation signal generation

Design of Buck Converter

Design of Boost Converter

Design of Multilevel Inverter circuit

Ideas on SAG/SWELL Circuits

Duration: 2 days .

Fees: Rs. 500 per student


Ezone Facilities and Requirements

Support from eZone end for Courses:

a) Trainer

b) Certification

c) Software required for the course

d) Tools and equipments only for training

e) Participants will be provided with reference material ,software in a CD.

f) Development tools PICKIT2/ICD2 and PIC development boards for the training.

What we expect from Institution/ Industry:

a) One class room big enough to accommodate the students.

b) LAB for conducting practical training.

c) One Laptop/PC between two students. PCs should have windows XP installed as OS and should be

networked.

d) Multimedia projectors, projection screen/writing board.

courses at e zone

Technology