coolelf auto supra -37°ccoolelf auto supra-37 c can be used for cast iron as well as aluminium...

3
COOLELF AUTO SUPRA -37°C COOLELF AUTO SUPRA -37°C is a «very long life» coolant based on monoethylene glycol and organic inhibitors of corrosion. COOLELF AUTO SUPRA -37°C is a cooling liquid that can be used in all cooling systems of combustion engines in cars, vans, trucks, buses, constructing machines and agricultural tractors. COOLELF AUTO SUPRA -37°C is the top-of-range product of our cooling liquid range. DESCRIPTION CHARACTERISTICS The typical characteristics mentioned represent mean values PH ALKALINITY RESERVE (PH 3.5) TEMPERATURE AT WHICH THE FIRST ICE CRYSTALS OCCUR DENSITY AT 15 °C COLOUR BOILING TEMPERATURE ASTM D1287 ASTM D1287 ASTM D1177 ASTM D1122 - ASTM D1120 8.4 2.8ML HCI 0.1N -38°C 1.068 108°C PINK TO FLUORESCENT ORANGE This coolant used in accordance with our recommendations and for the application for which it is intended does not represent a special hazard. A safety data file conforming to the requirements of current EC legislation is available from your local trade consultant. TOTAL LUBRIFIANTS Immeuble Spazio 562, avenue du Parc de l’île 92029 Nanterre cedex France COOLELF AUTO SUPRA -37°C Sheet updated: 05/15 Ready-to-use coolant O.A.T. SPECIFICATIONS COOLELF AUTO SUPRA -37°C meets the international specifications for antifreezes: COOLELF AUTO SUPRA -37°C is officially approved by the following manufacturers: COOLELF AUTO SUPRA -37°C has been acknowledged as satisfactory for use in their engines by the following manufacturers: AFNOR NFR 15-601 ASTM D3306 ASTM D4656 ASTM D4985 ASTM D6210 BS 6580 JASO M325 JIS K2234 SAE J1034 NATO S-759 AUDI TL 774 D/F/G DAIMLER + MB-Approval 326.3 (Coolant –50% dilution) DAF 74002 DEUTZ DQC CB-14 VW G12+ FORD WSS-M97B44 GM 6277M GMW 3420 MAN 324 Typ SNF SKODA TL 774 D/F/G SEAT TL 774 D/F/G VW TL 774 D/F/G GE Jenbacher TA 1000-0201 MWM 2091/11 CAT 2091/11 CUMMINS IS series u N14 KOMATSU 07 892 (2009) LIEBHERR MD1-36-130 MAZDA MEZ MN 121 D MTU MTL 5048 PACCAR DAF 74002 JAGUAR LAND-ROVER STJLR 651.5003 YANMAR JAGUAR LEYLAND TRUCKS RENAULT 41-01-001/ S Type D SAAB SCANIA WARTSILLA 32-9011

Upload: others

Post on 25-Aug-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: COOLELF AUTO SUPRA -37°CCOOLELF AUTO SUPRA-37 C can be used for cast iron as well as aluminium engines, and also in engine radiators in aluminium or copper alloy. COOLELF AUTO SUPRA-37°C

COOLELF AUTO SUPRA -37°C

COOLELF AUTO SUPRA -37°C is a «very long life» coolant based on monoethylene glycol and organic inhibitors of corrosion.

COOLELF AUTO SUPRA -37°C is a cooling liquid that can be used in all cooling systems of combustion engines in cars, vans, trucks, buses, constructing machines and agricultural tractors.

COOLELF AUTO SUPRA -37°C is the top-of-range product of our cooling liquid range.

DESCRIPTION

CHARACTERISTICS

The typical characteristics mentioned represent mean values

PH

ALKALINITY RESERVE (PH 3.5)

TEMPERATURE AT WHICH THE FIRST ICE CRYSTALS OCCUR

DENSITY AT 15 °C

COLOUR

BOILING TEMPERATURE

ASTM D1287

ASTM D1287

ASTM D1177

ASTM D1122

-

ASTM D1120

8.4

2.8ML HCI 0.1N

-38°C

1.068

108°C

PINK TO FLUORESCENT ORANGE

This coolant used in accordance with our recommendations and for the application for which it is intended does not represent a special hazard.A safety data file conforming to the requirements of current EC legislation is available from your local trade consultant.

TOTAL LUBRIFIANTSImmeuble Spazio562, avenue du Parc de l’île92029 Nanterre cedexFrance

COOLELF AUTO SUPRA -37°CSheet updated: 05/15

Ready-to-use coolant • O.A.T.

SPECIFICATIONS

COOLELF AUTO SUPRA -37°C meets the international specifications for antifreezes:

COOLELF AUTO SUPRA -37°C is officially approved by the following manufacturers:

COOLELF AUTO SUPRA -37°C has been acknowledged as satisfactory for use in their engines by the following manufacturers:

• AFNOR NFR 15-601 • ASTM D3306 • ASTM D4656 • ASTM D4985

• ASTM D6210 • BS 6580 • JASO M325 • JIS K2234

• SAE J1034 • NATO S-759

• AUDI TL 774 D/F/G • DAIMLER + MB-Approval 326.3 (Coolant –50% dilution) • DAF 74002 • DEUTZ DQC CB-14 • VW G12+ • FORD WSS-M97B44 • GM 6277M

• GMW 3420 • MAN 324 Typ SNF • SKODA TL 774 D/F/G • SEAT TL 774 D/F/G • VW TL 774 D/F/G • GE Jenbacher TA 1000-0201 • MWM 2091/11 • CAT 2091/11

• CUMMINS IS series u N14 • KOMATSU 07 892 (2009) • LIEBHERR MD1-36-130 • MAZDA MEZ MN 121 D • MTU MTL 5048 • PACCAR DAF 74002 • JAGUAR LAND-ROVER STJLR 651.5003 • YANMAR

• JAGUAR • LEYLAND TRUCKS • RENAULT 41-01-001/ S Type D

• SAAB • SCANIA • WARTSILLA 32-9011

Page 2: COOLELF AUTO SUPRA -37°CCOOLELF AUTO SUPRA-37 C can be used for cast iron as well as aluminium engines, and also in engine radiators in aluminium or copper alloy. COOLELF AUTO SUPRA-37°C

APPLICATIONS

PERFORMANCES

WEIGHT LOSS (MG/COUPON)

ASTM D3306 LIMITSCOOLELF AUTO SUPRA

copper10 1.9

solder300.3

brass101.6

steel 10

-0.5 -

cast iron101.4

aluminium 30 4.6

ASTM D1384 : GLASSWARE CORROSION TEST(336H/88°C/33%VOL)

ASTM D3306 LIMITS

1.0COOLELF AUTO SUPRA < 0.2

ASTM D4340: ALUMINIUM HEAT REJECTION TEST (25% VOL)

WEIGHT LOSS (MG/CM²/WEEK)

PROTECTION AGAINST FREEZING (UNTIL -37°C)

LIFETIME

ENVIRONMENT

COOLELF AUTO SUPRA -37°C offers excellent cavitation protection even without using nitrite, molybdates or nitrite-based supplemental coolant additives (SCA’s)

Heat transfer remains optimised: fully organic additives allow avoiding any formation of deposits and leave surfaces clean.

VERY LONG-TERM PROTECTION AGAINST METALS CORROSION

CUSTOMER BENEFITS

The additives in COOLELF AUTO SUPRA -37°C give to the coolant:+ Chemical neutrality (pH 7-8.5), + A reserve of alkalinity to neutralise the acids resulting from the combustion gases, + Resistance to foaming (mainly instability of the foam that might form) + Compatibility with hard water (maximum 40°F).

NO FORMATION OF DEPOSITS LEAVE SURFACES CLEAN

COOLELF AUTO SUPRA -37°C contains no silicates, phosphates, chromates, nitrites or boron.

COOLELF AUTO SUPRA -37°C is inert to elastomeric seals and paints.

EXCELLENT PROTECTION OF ALUMINIUM AT HIGH TEMPERATURE

COOLELF AUTO SUPRA-37°C can be used for cast iron as well as aluminium engines, and also in engine radiators in aluminium or copper alloy.

COOLELF AUTO SUPRA-37°C is a permanent coolant that can be used during the whole year.

COOLELF AUTO SUPRA-37°C C is ready for use, as a mix with demineralised water.

Recommended oil change interval:• 650 000 km/8000 hours/5 years when used in trucks • 250 000 km/5 years when used in cars.

All antifreezes and coolants based upon monoethylene glycol are regarded as special industrial wastes and must be disposed of in approved centres for environmental reasons.

COOLELF AUTO SUPRA -37°CReady-to-use coolant • O.A.T.

This coolant used in accordance with our recommendations and for the application for which it is intended does not represent a special hazard.A safety data file conforming to the requirements of current EC legislation is available from your local trade consultant.

TOTAL LUBRIFIANTSImmeuble Spazio562, avenue du Parc de l’île92029 Nanterre cedexFrance

COOLELF AUTO SUPRA -37°CSheet updated: 05/15

Page 3: COOLELF AUTO SUPRA -37°CCOOLELF AUTO SUPRA-37 C can be used for cast iron as well as aluminium engines, and also in engine radiators in aluminium or copper alloy. COOLELF AUTO SUPRA-37°C

PERFORMANCES

REFERENCE COOLANTAFTER INITIAL CLEANING

AFTER FINAL CLEANING

COOLELF AUTO SUPRAAFTER INITIAL CLEANING

AFTER FINAL CLEANING

ASTM D7583 JOHN DEERE DIESEL ENGINE COOLANT CAVITATION TEST RESULT:

AGING TEST: VERY SEVERE CORROSION TEST

ASTM D6210: HEAVY DUTY ENGINE COOLANTS

169 H

5.0 L

1.5 BAR

3.0 L/MIN

5500 W

95°C

75°C

40% VOL

TYPICAL CONDITIONS SEVERE CONDITIONS

504 H

6.0 L

2.5 BAR

3.5 L/MIN

5000 W

115°C

95°C

20% VOL

TEST CONDITIONS

TEST DURATION

FLUID CONTENT

PRESSURE

FLOW

HEAT INPUT

TEMPERATURE IN HEATING VESSEL

TEMPERATURE IN COOLING VESSEL

CONCENTRATION OF COOLANT IN WATER

CUZN

2.905.66

1.622.53

SOLDER CB

21.4525.83

0.430.55

AL (SAE 329)

82.10125.01

9.7723.58

ALMN

64.0294.33

0.714.14

CAST IRON

-2.19-0.36

-0.070.0

STEEL

-1.680.11

0.170.24

CU

3.62

LINER NUMBER 61 2 3 4 5

D7583 REQUIREMENT < 200PIT COUNT COOLELF AUTO SUPRA -37°C 9 13131 38 18 16 19

4.99

1.442.63

As stated in latest revision of ASTM D6210: “coolants that have completed the Test Method D7583 (test method to demonstrate coolant cavitation protection performance) with a maximum pit count of 200 are regarded as passing ASTM D6210”

COOLELF AUTO SUPRA -37°C

TOTAL

ASTM D2570: SIMULATED SERVICE TEST

WEIGHT LOSS (MG/CM²)

ASTM D3306 LIMITSCOOLELF AUTO SUPRA

copper20 2.0

solder601.0

brass202.0

steel 20 1.0 -

cast iron203.0

aluminium 60 1.0

Ready-to-use coolant • O.A.T.

This coolant used in accordance with our recommendations and for the application for which it is intended does not represent a special hazard.A safety data file conforming to the requirements of current EC legislation is available from your local trade consultant.

TOTAL LUBRIFIANTSImmeuble Spazio562, avenue du Parc de l’île92029 Nanterre cedexFrance

COOLELF AUTO SUPRA -37°CSheet updated: 05/15