combo sills

TOLL FREE (888) 237-7455 � FAX (831) 674-3949 � [email protected] - 4 -

COMBO SILL PREPS

PREP-101

“3/4” MILLED ENDS, SILL IS NET 1-1/2” OVER DOOR SIZE”

PREP 101 – 3/4" END MILL FABRICATION. SILL TO BE APPLIED TO BOTTOM OF FRAME. SILL SUPPLIED WITH 3 END HOLES AND 1 CENTER HOLE TO 49-1/2” LENGTH AND 2 CENTER HOLES OVER 49-1/2” LENGTH.

PRICE FOR THIS PREP $1.30 LIST

PREP-102 “NO MILLED ENDS,SCREW HOLES ONLY”

PREP 102 – NON-MILLED SILL ENDS. SILL APPLIED BETWEEN FRAME LEGS WHEN STOP HAS BEEN RABBETED. SILL SUPPLIED WITH 2 SCREW HOLES ON ENDS AND 1 CENTER HOLE TO 49-1/2” LENGTH OR 2 CENTER HOLES OVER 49-1/2” LENGTH.

THERE IS NO CHARGE FOR THIS PREP.

L- NOTCH OR TRIM NOTCH

L-NOTCH PREP - PREP FOR L OR TRIM NOTCHES. THIS PREP REMOVES A PORTION OF THE FRONT OF A SILL OR THRESHOLD TO ALLOW DOOR TRIM TO RUN ALL THE WAY TO THE BOTTOM OF THE SILL OR THRESHOLD.

PRICE FOR THIS PREP IS $2.40 LIST.

U- NOTCH “TIMELYNOTCH”

U-NOTCH PREP- THIS PREP REMOVES A

“U” SHAPED PORTION OF A SILL OR THRESHOLD TO ALLOW THE SILL OR THRESHOLD TO FIT AROUND THE STOP PORTION OF THE FRAME. IT IS ALSO KNOWN AS A “TIMELY NOTCH”.



COMBO SILL PREPS

MULL PREP “TYPICALFORSIDELITEUNITS”

MULLION PREP- USED FOR SIDELITES UNITS. CUSTOMER TO PROVIDE A DETAILED DRAWING FOR FABRICATION. THE MILLED AREA IS 1-1/2” WIDE TO ACCEPT BACK TO BACK FRAMES.

PRICE FOR THIS PREP IS $4.75 LIST

WOOD BLOCK PREP

WOOD BLOCK PREP- 2 WOOD BLOCKS ON THE ENDS OF A NET LENGTH SILL ALLOWS THE NAILING OF THE FRAME TO THE SILL. THE BLOCKS ARE PRESSURE TREATED AND GLUED IN PLACE.


FLAT FLOOR RIP “RIPSFRONT LIP OFF SILL”

FLAT FLOOR RIP - REMOVES THE FRONT LEG OF A COMBO SILL SO THE SILL CAN BE USED ON AN INTERIOR WALL WHERE THE FLOOR IS THE SAME HEIGHT ON BOTH SIDES OF THE WALL.

PRICE FOR THIS PREP IS $2.20 LIST


COMBO INSWING SILLS

DRAWINGS NOT TO SCALE

S-51 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 3-5/8”- 4-7/8” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE S-56 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 4-3/8”- 5-5/8” WIDE FRAMES

*QUIKSHIP ITEM*

BLUE TAPE AVAILABLE


COMBO INSWING SILLS PER INCH LIST PRICE

PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-51 $0.40 $0.55 $0.57 $0.67 $1.30 S-56 $0.43 $0.57 $0.60 $0.72 $1.40

COMBO INSWING SILLS PER PIECE LIST PRICE 0.8

PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-5130” $12.00 $16.50 $17.10 $20.10 $39.00 31-1/2” $13.40 $18.13 $18.76 $21.91 $41.75 32” $12.80 $17.60 $18.24 $21.44 $41.60 33-1/2” $14.20 *$19.23 $19.90 $23.25 $44.35 36” $14.40 $19.80 $20.52 $24.12 $46.80 37-1/2” $15.80 *$21.43 $22.18 $25.93 $49.55 BLUE TAPE = ADD $0.35 PER FOOT LIST


*HIGHLITED PRICES ARE QUICKSHIP PRODUCTS


COMBO INSWING SILLS


S-67 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 5-1/2”- 6-1/2” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE S-76 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 6-3/8”- 7-5/8” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE



PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-67 $0.54 $0.71 $0.75 $0.88 $1.55 S-76 $0.56 $0.75 $0.80 $0.93 $1.75


PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL



*HIGHLITED PRICES ARE QUICKSHIP PRODUCTS


COMBO INSWING SILLS


S-87 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ USE 7-1/4”- 8-5/8” WIDE FRAMES

BLUE TAPE AVAILABLE T-51 FINISHES MILL, BRONZE STOCK LENGTH = 16’

USE 3-5/8”- 4-7/8” WIDE FRAMES

BLUE TAPE AVAILABLE



PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-87 $1.25 $1.40 $1.65 N/A N/A T-51 $0.69 $0.89 N/A N/A N/A


PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-8730” $37.50 $42.00 $49.50 N/A N/A 31-1/2” $40.68 $45.40 $53.28 N/A N/A 32” $40.00 $44.80 $52.80 N/A N/A 33-1/2” $43.18 $48.20 $56.58 N/A N/A 36” $45.00 $50.40 $59.40 N/A N/A 37-1/2” $48.18 $53.80 $63.18 N/A N/A BLUE TAPE = ADD $0.85 PER FOOT LIST

T-5130” $20.70 $26.70 N/A N/A N/A 32” $22.08 $28.48 N/A N/A N/A 36” $24.84 $32.04 N/A N/A N/A 48” $33.12 $42.72 N/A N/A N/A BLUE TAPE = ADD $0.45 PER FOOT LIST


COMBO INSWING SILL RISER


SR-1 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ 9/16” SILL RISER FOR COMBO SILL OVERALL HEIGHT 1- 11/16”


COMBO INSWING SILL RISER PER INCH LIST PRICE

PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SR-1 $0.19 $0.26 $0.27 $0.30 $0.44

COMBO INSWING SILL RISER PER PIECE LIST PRICE

PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SR-130” $5.70 $7.80 $8.10 $9.00 $13.20 32” $6.08 $8.32 $8.64 $9.60 $14.08 36” $6.84 $9.36 $9.72 $10.80 $15.84 42” $7.98 $10.92 $11.34 $12.60 $18.48 48” $9.12 $12.48 $12.96 $14.40 $21.12 60” $11.40 $15.60 $16.20 $18.00 $26.40 72” $13.68 $18.72 $19.44 $21.60 $31.68


WATER RETURN INSWING SILLS

W-51 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 4-3/8”- 5-1/2” WIDE FRAMES

BLUE TAPE AVAILABLE W-67 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 5”- 6-1/4” WIDE FRAMES

BLUE TAPE AVAILABLE WATER RETURN SILL PAN 30 GA.GALVANIZED “STANDARD SILL PAN IS 6” LONGER THAN SILL.”



WATER RETURN INSWING SILLS PER INCH LIST PRICE

PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

W-51 $0.49 $0.67 N/A N/A N/A W-67 $0.56 $0.78 N/A N/A N/A

SILL PAN $0.046 N/A N/A N/A N/A

WATER RETURN INSWING SILLS PER PIECE LIST PRICE

PROFILEMILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

W-51 30” $14.70 $20.10 N/A N/A N/A 32” $15.68 $21.44 N/A N/A N/A 36” $17.64 $24.12 N/A N/A N/A 73” $35.77 $48.91 N/A N/A N/A

W-67 30” $16.80 $23.40 N/A N/A N/A 32” $17.92 $24.96 N/A N/A N/A 36” $20.16 $28.08 N/A N/A N/A 73” $40.88 $56.94 N/A N/A N/A

combo sills

Documents