chapter 2 © copyright 2007 prentice-hallelectric circuits fundamentals - floyd chapter 2

Chapter 2Chapter 2

© Copyright 2007 Prentice-HallElectric Circuits Fundamentals - Floyd

Chapter 2

Chapter 2Chapter 2


Summary

There is a force (F) between electrical charges. Like charges repel; unlike charges attract.

• The force is directly proportional to charge.• The force is inversely proportional to square of distance.

+ + +_

Electrical charge

Chapter 2Chapter 2


e-

Summary

Force is required to move a charge against the electric field.

Voltage is the work per charge done against the electric field.

Voltage

+++++++++

---------

When force is applied over a distance, work is done. Work done in moving a charge against the electric field leads to the definition of voltage:

Chapter 2Chapter 2


Summary

WV

Q

One volt is the potential difference (voltage) between two points when one joule of energy is used to move one coulomb of charge from one point to the other.

Voltage

The defining equation for voltage is

Chapter 2Chapter 2


Summary

Voltage is responsible for establishing current.

Sources of voltage include batteries, solar cells, and generators. A Cu-Zn battery, such as you might construct in a chemistry class, is shown.

Zinc(anode)

Zn + 2eZn2+

ZnSO4solution

Porousbarrier

Copper(cathode)

Cu2+ + 2e

CuSO4solution

Cu

+e

e

-

- -

-

Voltage

Chapter 2Chapter 2


Summary

Ideally, a voltage source can provide a constant voltage for any current required by a circuit.

In practice, ideal sources do not exist, but they can be closely approximated by actual sources.

Voltage

I

V

The IV curve for an ideal voltage source has a constant voltage for all current.

Chapter 2Chapter 2


Summary

Current (I) is the amount of charge (Q) that flows past a point in a unit of time (t). The defining equation is:

QI

t

One ampere is a number of electrons having a total charge of 1 C moving through a given cross section in 1 s.

0.4 AWhat is the current if 2 C passes a point in 5 s?

Current

Chapter 2Chapter 2


Summary

Ideally, a current source can provide a constant current for any load.

Current

I

V

The IV curve for an ideal current source has a constant current as indicated by the straight line.

Chapter 2Chapter 2


Summary

Resistance is the opposition to current. One ohm (1 ) is the resistance if one ampere (1 A) is in a material when one volt (1 V) is applied.

Conductance is the reciprocal of resistance.

1G

R

Components designed to have a specific amount of resistance are called resistors. Color bands

Resistance material(carbon composition)

Insulation coating

Leads

Resistance

Chapter 2Chapter 2


Summary

Color

Black

Brown

Red

Orange

Yellow

Green

Blue

Violet

Gray

White

Gold

Silver

No band

0

1

2

3

4

5

6

7

8

9

±5%

±10%

Digit

±20%

100

101

102

103

104

105

106

107

108

109

10-1

10-2

Multiplier

1% (five band)

5% (four band)

Tolerance

2% (five band)

10% (four band)

Resistance value, first three bands:

First band – 1st digit

Second band – 2nd digit

*Third band – Multiplier (number of zeros following second digit)

Fourth band - tolerance

* For resistance values less than 10 , the third band is either gold or silver. Gold is for a multiplier of 0.1 and silver is for a multiplier of 0.01.

Resistance color-code

Chapter 2Chapter 2


Summary

What is the resistance and tolerance of each of the four-band resistors?

5.1 k± 5%

k± 5%

47 ± 10%

1.0 ± 5%

Chapter 2Chapter 2


Summary

• Two or three digits, and one of the letters R, K, or M are used to identify a resistance value.

• The letter is used to indicate the multiplier, and its position is used to indicate decimal point position.

Alphanumeric Labeling

Chapter 2Chapter 2


Summary

Variable resistors include the potentiometer and rheostat. The center terminal of a variable resistor is connected to the wiper.

13

2

Resistiveelement

Wiper

Shaft

Variable resistors

R

Variable resistor (potentiometer)

R

Variable resistor (rheostat)

To connect a potentiometer as a rheostat, one of the outside terminals is connected to the wiper.

Chapter 2Chapter 2


Summary

A basic electric circuit consists of 1) a voltage source2) a path 3) a load.

Switch Metal strip

Metal reflector Spring

The electric circuit

An example of a basic circuit is a flashlight, which has each of these plus a control element – the switch.

Chapter 2Chapter 2


Summary

The electric circuit

Circuits are described pictorially with schematics. For example, the flashlight can be represented by

Battery (2 cells)

Switch

Lamp

Chapter 2Chapter 2


Summary

Switches

The pole refers to the movable arm of a switch.

Switches are commonly used to control circuits by either mechanical or electronic means.

The throw refers to the number of contacts that are affected by a single switch action.

SPST SPDT DPST DPDT

Chapter 2Chapter 2


Summary

The DMM (Digital Multimeter) is an important multipurpose instrument which can measure voltage, current, and resistance. Many include other measurement options.

The DMM

V

Hz

10 A

40 mA

OFF

mV

A

V

H

H

V H

COM

V

Chapter 2Chapter 2


Summary

An analog multimeter is also called a VOM (volt-ohm-milliammeter). Analog meters measure voltage, current, and resistance. The user must choose the range and read the proper scale.

Analog meters

Photo courtesy of Triplett Corporation

Chapter 2Chapter 2


Conductance

Coulomb

Current

Electron

Ground

Ohm ()

The ability of a circuit to allow current. The unit is the siemans (S).

The unit of electrical charge.

The rate of flow of electrical charge.

A basic particle of electrical charge in matter. The electron possesses a negative charge.

Selected Key Terms

The common or reference point in a circuit.

The unit of resistance.

Chapter 2Chapter 2


Potentiometer

Resistance

Rheostat

Siemens

Volt

Voltage

A three-terminal variable resistor.

The opposition to current. The unit is the ohm ().

A two-terminal variable resistor.

Selected Key Terms

The unit of conductance.

The unit of voltage or electromotive force.

The amount of energy per charge available to move electrons from one point to another in an electric circuit.

Chapter 2Chapter 2


Quiz

1. The atomic particle responsible for electrical current in solid metallic conductors is the

a. proton

b. electron

c. neutron

d. all of the above

Chapter 2Chapter 2


Quiz

2. The symbol for charge is

a. C

b.

c. Q

d. W

Chapter 2Chapter 2


Quiz

3. The definition for voltage is

a.

b.

c.

d.

QV

t

WV

t

WV

Q

V It

Chapter 2Chapter 2


Quiz

4. A battery stores

a. electrons

b. protons

c. ions

d. chemical energy

Chapter 2Chapter 2


Quiz

5. The unit of conductance is the

a. ohm

b. coulomb

c. siemens

d. ampere

Chapter 2Chapter 2


Quiz

6. A four-color resistor with the color bands gray-red-black-gold is

a. 73

b. 82

c. 680

d. 820

Chapter 2Chapter 2


Quiz

7. A 330 k ± 5% resistor has the color bands

a. red-red-brown-gold

b. orange-orange-yellow-gold

c. yellow-yellow-red-gold

d. yellow-yellow-green-gold

chapter 2 © copyright 2007 prentice-hallelectric circuits fundamentals - floyd chapter 2

Documents

voltage slide

current slide

resistance slide

constant voltage

sources of voltage

constant current

definition of voltage

ideal voltage source