british standard brick specials - brick … · an - angle and cant bricks british standard brick...
TRANSCRIPT
www.chandlersbs.co.ukwww.hanson.com/uk/brickspecials
BRITISH STANDARDBRICK SPECIALS
AN - Angle and cant bricks
British Standard brick specials
This group is made up of special brickswith two separate functions.
The angle bricks allow brickwork to turnthrough 30, 45, and 60 degree angles inplan with various bonding patterns.
The cant range allows splay detailingto be achieved within brickwork towindow surrounds, corner details andother locations.
A
90˚
E
D
B
C
8
AN.1 Squint(left or right hand - if surface has textured finish)
Left hand shown
Type A B C D E �
AN.1.1 164 102 65 51 89 30°
AN.1.2 164 102 65 51 94 45°
AN.1.3 164 102 65 51 117 60°
B
C
A
D
8
Type A B C D �
AN.2.1 1591 102 65 102 30°
AN.2.2 1591 102 65 102 45°
AN.2.3 1591 102 65 102 60°
AN.2.4 2152 102 65 102 30°
AN.2.5 2152 102 65 102 45°
AN.2.6 2152 102 65 102 60°
Left hand shown
1 Suitable for quarter bond without cutting2 Suitable for half bond without cutting
Note: Some types of bricks may not be available with A = 215mm
AN.3 Internal angle (dog leg)(left or right hand - if surface has textured finish)
Type A B C D �
AN.3.1 1642 102 65 51 30°
AN.3.2 1642 102 65 51 45°
AN.3.3 1642 102 65 51 60°
AN.3.4 1591 102 65 102 30°
AN.3.5 1591 102 65 102 45°
AN.3.6 1591 102 65 102 60°
AN.3.7 2152 102 65 102 30°
AN.3.8 2152 102 65 102 45°
AN.3.9 2152 102 65 102 60°
1 Suitable for quarter bond without cutting2 Suitable for half bond without cutting
Note: Some types of bricks may not be available with A = 215mm
Note: Suitable for half bond without cutting
AN.2 External angle(left or right hand - if surface has textured finish)
B
C
DA8
A
C
B
8
AN.4 Birdsmouth
Type A B C �
AN.4.1 215 102 65 120°
AN.4.2 215 102 65 135°
AN.4.3 215 102 65 150°
Left hand shown
2
A
D
EE
C
B
AN.7 Single cant external return
Mirror
Type A B C D E
AN.7.1 215 215 102 46 159
AN.7.2 215 215 102 60 173
AD
C
B
E
E E
AN.8 Single cant internal returnwith internal mitre (square external corner on bed)
Mirror
Type A B C D E
AN.8.1 215 215 102 46 159
AN.8.2 215 215 102 60 173
Note: Faced on two full stretchers.
AD
C
B
45o 45o
E E
AN.9 Single cant internal return with internal slope (square external corner on bed)
Mirror
Type A B C D E
AN.9.1 215 215 102 46 159
AN.9.2 215 215 102 60 173
Note: Faced on two full stretchers.
AB
F F
AN.10 Single cant external angle
Mirror
Type A B C D E F �
AN.10.1 215 102 159 46 159 101 30°
AN.10.2 215 102 159 60 173 101 30°
AN.10.3 215 102 159 46 159 70 45°
AN.10.4 215 102 159 60 173 70 45°
AN.10.5 215 102 159 46 159 35 60°
AN.10.6 215 102 159 60 173 35 60°
A
E
C
B
D
AN.6 Double cant
Type A B C D E
AN.6.1 215 102 65 46 103
AN.6.2 215 102 65 60 131
Note: When these cappings are required at stop-endlocations, specially faced units can be provided.
E
D
C C
8
B
D
A
E
C
AN.5 Single cant(left or right hand - if surface has textured finish)
Left hand shown
Type A B C D E
AN.5.1 215 102 65 46 159
AN.5.2 215 102 65 60 173
Note: All faced on header bricks shown on bed as used in atypical brickwork application.
May also be used on end or on edge for paving applications.
AN
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 3
B
CC
E
8AN.11 Single cant internal angle
A
B
F F
Mirror
Type A B C D E F �
AN.11.1 215 102 159 46 159 101 30°
AN.11.2 215 102 159 60 173 101 30°
AN.11.3 215 102 159 46 159 70 45°
AN.11.4 215 102 159 60 173 70 45°
AN.11.5 215 102 159 46 159 35 60°
AN.11.6 215 102 159 60 173 35 60°
C
B A
EF
D
AN.12 Double cant stop end (square corners on bed)
Mirror
Type A B C D E F
AN.12.1 215 215 102 46 103 159
AN.12.2 215 215 102 60 131 173
AN.13 Double cant stop end (canted corners on bed)
Type A B C D E F
AN.13.1 215 215 102 46 103 159
AN.13.2 215 215 102 60 131 173
E
AB
D
C
F
Mirror
A
D
EE
C
B
45o
45o
AN.14 Double cant external return with internal mitre (square corners on bed)
Type A B C D E
AN.14.1 215 215 102 46 103
AN.14.2 215 215 102 60 131
Mirror
A
FF
D
EE
C
B
45o
45o
AN.15 Double cant external returnwith internal mitre (canted corner on bed)
Type A B C D E F
AN.15.1 215 215 102 46 103 159
AN.15.2 215 215 102 60 131 173
Mirror
A
D
EE
C
B
45o
45o
AN.16 Double cant external return with internal slope (square corner on bed)
Type A B C D E
AN.16.1 215 215 102 46 103
AN.16.2 215 215 102 60 131
Mirror
AN - Angle and cant bricks
4
AN.19 Double cant ‘T’ junction
AN.3.2.11 Female universal joint
AN.2.2.11 Male universal joint
AN.18 Double cant angle
AN.17 Double cant external returnwith internal slope (canted corner on bed)
A
FF
D
EE
C
B
45o45o
Type A B C D E F
AN.17.1 215 215 102 46 103 159
AN.17.2 215 215 102 60 131 173
Mirror
B
CC
D
E
8
A
F F
Mirror
Type A B C D E F �
AN.18.1 215 102 159 46 103 101 30°
AN.18.2 215 102 159 60 131 101 30°
AN.18.3 215 102 159 46 103 70 45°
AN.18.4 215 102 159 60 131 70 45°
AN.18.5 215 102 159 46 103 35 60°
AN.18.6 215 102 159 60 131 35 60°
Note: May be supplied in sections.
A
FE
F
C
B
D45o
45o
Type A B C D E F
AN.19.1 215 215 102 46 103 56
AN.19.2 215 215 102 60 131 42
R
A
B
C
D
E
Type A B C D E
AN.3.2.11 230 102 65 218 12
Type A B C D E
AN.2.2.11 215 102 65 106 26
A
E
D
R
B
C
AN
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 5
PC.1 Canted pier cap(also see coping and capping brick specials)
MAN.1 Double cant stop end
MAN.2 Single cantfaced on side (left or right hand)
MSD.4 External soldier return to single cant on end (also see soldier brick specials)
MSD.5 External angle soldier return to single cant on end (also see soldier brick specials)
MSD.6 Internal angle soldier return to single cant on end (also see soldier brick specials)
Type A B C D E
PC.1.1 215 215 102 46 103
PC.1.2 215 215 102 60 131
PC.1.3 215 215 65 9 103
PC.1.4 215 215 65 22 131
AB
C
E
D
C
BA
E
D
F
45˚
Type A B C D E F
MAN.1.1 215 102 65 9 103 46
MAN.1.2 215 102 65 23 131 60
Type A B C D E
MAN.2.1 215 102 65 46 159
MAN.2.2 215 102 65 60 173
E
D
A
B
C
Left hand shown
BF
A
EG
D
C
Type A B C D E F G
MSD.4.1 215 177 159 46 65 102 10
MSD.4.2 215 177 173 60 65 102 10
B
DE
C
F
A
8
DC
A
B
E
F
8
Type A B C D E F �
MSD.6.1 215 107 102 65 46 159 45°
MSD.6.2 215 107 102 65 60 173 45°
Note: Other angles also available.
Type A B C D E F �
MSD.5.1 215 159 102 102 46 60 45°
MSD.5.2 215 173 102 102 60 60 45°
Note: Other angles also available.
AN - Angle and cant bricks
6
BD - bonding bricks
British Standard brick specials
The BD range covers special shapedbricks used to create brick bondingin solid walls without the need forcutting bricks on site.
English, English Garden Wall andFlemish bonds can also be constructedusing these specials.
BD.1.1 Half bat (snap header)
AB
C
Type A B C
BD.1.1 102 102 65
Note: Can be supplied face on bed
AB
C
Type A B C
BD.1.2 159 102 65
Left hand shown
C
A
B
Type A B C
BD.1.3 215 102 65
Note: Faced on two headers, one stretcher and one bed.
Reverse
BD.1.3 Standard brick (faced on bed surface)
A
D
B
E
C
*
Type A B C D E
BD.2 215 102 65 102 46
Note: BD.2 can be supplied with an additional face
(*) and can therefore be used as a cill brick.
Left hand shown
Reverse
A
B
C
Type A B C
BD.3 215 46 65
A
C
B
Type A B C
BD.4.1 215 159 102
BD.4.2 215 159 65
BD.4.3 215 215 102
BD.4.4 215 215 65
Mirror
BD.1.2 Three quarter bat(left or right hand - if surface has textured finish)
BD.3 Queen closer
BD.4 215mm stop end
BD.2 King closer(left or right hand - if surface has textured finish)
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 7
CP - Copings and cappings
British Standard brick specials
These special shaped bricks are used to capthe tops of parapet or free standing walls.
Available in two sizes:Coping - 305mm wide with drips for use asan overhanging coping on a 215mm wide wallCapping - 215mm wide when used asa capping.
CP.1.1 Half round coping CP.2.1 Saddleback coping
CP.1.2 Half round capping CP.2.2 Saddleback capping
A
B
CD2
D1
Type A B C D1 D2
CP.1.1 305 153 65 13 15
A
B
C
Type A B C
CP.1.2 215 108 65
Note: When these copings are required at stop-endlocations, specially faced units can be provided.
Note: When these cappings arerequired at stop-end locations,specially faced units can be provided.
E
B
A
D2
D1
C
Type A B C D1 D2 E
CP.2.1 305 153 65 13 15 50
D
B
AC
Type A B C D
CP.2.2 215 123 65 50
Note: When these copings are required at stop-endlocations, specially faced units can be provided.
Note: When these cappings are requiredat stop-end locations, specially facedunits can be provided.
8
BN - bullnose bricks
British Standard brick specials
Bullnoses are a popular range of specialshaped bricks which have long beenused to soften the aesthetics on walls,around openings or to the cornerdetailing of buildings.
BN.1 Single bullnose(left or right hand - if surface has textured finish)
BN.3 Single bullnose stop(left or right hand)
BN.2 Double bullnose
BN.4 Double bullnose stop
B
A
CR
Type A B C R
BN.1.1 215 102 65 25
BN.1.2 215 102 65 51
AB
CR
R
Left hand shown
Type A B C R
BN.2.1 215 102 65 25
BN.2.2 215 102 65 51
Type A B C D R
BN.4.1 215 102 65 25 25
BN.4.2 215 102 65 25 51
A
B
C
D
RR
Mirror
A
B
C
D
R
Left hand shown
Type A B C D R
BN.3.1 215 102 65 25 25
BN.3.2 215 102 65 25 51
BN.6 Single bullnose stretcher on flat
BN.5 Single bullnose header on flat
AB
C
R
AB
C
R
Type A B C R
BN.5.1 215 102 65 25
BN.5.2 215 102 65 51
Type A B C R
BN.6.1 215 102 65 25
BN.6.2 215 102 65 51
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 9
BN.10 Bullnose external return on edge
AB
CR
B A
C
Mirror
Type A B C R
BN.10.3 215 215 102 25
BN.10.4 215 215 102 51
BN.8 Single bullnose internal return header faced
BN.9 Bullnose internal return flat faced (left or right hand)
BN.10 Bullnose external return on edge(left or right hand)
BN.7 Single bullnose internal mitre
A
C
B
R
R
A C
B
R R
Type A B C R
BN.7.1 215 102 65 25
BN.7.2 215 102 65 51
Type A B C R
BN.7.3 215 102 215 25
BN.7.4 215 102 215 51
Left hand shown
BN.7 Single bullnose internal return (left or right hand)
A
R
R
C
B
Type A B C R
BN.8.1 215 102 65 25
BN.8.2 215 102 65 51
Right hand shown
BN.8 Single bullnose internal return header faced (left or right hand)
B
A
C
RR
Type A B C R
BN.8.3 215 102 102 25
BN.8.4 215 102 102 51
A
C
B
R R
Type A B C R
BN.9.1 215 102 65 25
BN.9.2 215 102 65 51
Left hand shown
C
B
A
R
R
Mirror
Type A B C R
BN.10.1 215 65 102 25
BN.10.2 215 65 102 51
Left hand shown
BN - bullnose bricks
10
BN.11 Bullnose external return on flat(left or right hand)
BN.11 Bullnose external returnflat faced
BN.13 Bullnose double header on flat
BN.14 Bullnose double stretcher on flat
BN.15 Stop end to double bullnose on edgeand to bullnose double header on flat (square corners on bed)
A
C
B
AB
CR
C
AB
Mirror
Type A B C R
BN.11.1 215 102 65 25
BN.11.2 215 102 65 51
Type A B C R
BN.11.3 215 215 65 25
BN.11.4 215 215 65 51
BN.12 Bullnose mitre(left or right handed)
R
Mirror
Left hand shown
A
C
B
R
Type A B C R
BN.15.1 215 159 102 25
BN.15.2 215 159 102 51
BN.15.3 215 215 102 25
BN.15.4 215 215 102 51
BN.15.5 215 159 65 25
BN.15.6 215 159 65 51
BN.15.7 215 215 65 25
BN.15.8 215 215 65 51
AB
CR
R
A
C
B
RR
A
C
B
R
Type A B C R
BN.13.1 215 102 65 25
BN.13.2 215 102 65 51
Type A B C R
BN.14.1 215 102 65 25
BN.14.2 215 102 65 51
Mirror
BN
A
C
B
R
RR
Type A B C R
BN.12.1 215 102 65 25
BN.12.2 215 102 65 51
Left hand shown
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 11
BN.17 Cownose stop
BN.16 Cownose
A
C
B
R
A
C
D
B
R
A
D
C
B
R
A
C
B
R R
R
Mirror
MirrorMirror
Mirror
Type A B C R
BN.18.1 215 159 102 25
BN.18.2 215 159 102 51
BN.18.3 215 215 102 25
BN.18.4 215 215 102 51
BN.18.5 215 159 65 25
BN.18.6 215 159 65 51
BN.18.7 215 215 65 25
BN.18.8 215 215 65 51
BN.19 External return todouble bullnose on edgeand to bullnose double header on flat (square corners on bed)
Type A B C R
BN.16.1 215 102 65 25
BN.16.2 215 102 65 51
Type A B C D R
BN.17.1 215 102 65 25 25
BN.17.2 215 102 65 25 51
A
C
B
RR
Type A B C R
BN.19.1 215 215 102 25
BN.19.2 215 215 102 51
BN.19.3 215 215 65 25
BN.19.4 215 215 65 51
C
D D
C
B
8
R
A
Mirror
Type A B C D R �
BN.21.1 215 102 159 101 25 30°
BN.21.2 215 102 159 101 51 30°
BN.21.3 215 65 159 101 25 30°
BN.21.4 215 65 159 101 51 30°
BN.21.5 215 102 159 70 25 45°
BN.21.6 215 102 159 70 51 45°
BN.21.7 215 65 159 70 25 45°
BN.21.8 215 65 159 70 51 45°
BN.21.9 215 102 159 35 25 60°
BN.21.10 215 102 159 35 51 60°
BN.21.11 215 65 159 35 25 60°
BN.21.12 215 65 159 35 51 60°
BN.18 Stop end to doublebullnose on edgeand to bullnose double header on flat (rounded corners on bed)
Mirror
BN.20 External return to doublebullnose on edgeand to bullnose double header on flat (rounded corners on bed)
BN.21 Double bullnose external angle to double bullnose on edgeand to bullnose double header on flat
A
C
B
R
R R
Mirror
Type A B C R
BN.20.1 215 215 102 25
BN.20.2 215 215 102 51
BN.20.3 215 215 65 25
BN.20.4 215 215 65 51
BN - bullnose bricks
12
BN.24 Soldier bullnose external return
PC.2 Bullnose pier cap (also see coping and capping brick specials)
MRD.3 Radial bullnose header(also see radial brick specials)
CC
B
D D
8
RR
A
Mirror
Type A B C D R �
BN.22.1 215 102 159 101 25 30°
BN.22.2 215 102 159 101 51 30°
BN.22.3 215 65 159 101 25 30°
BN.22.4 215 65 159 101 51 30°
BN.22.5 215 102 159 70 25 45°
BN.22.6 215 102 159 70 51 45°
BN.22.7 215 65 159 70 25 45°
BN.22.8 215 65 159 70 51 45°
BN.22.9 215 102 159 35 25 60°
BN.22.10 215 102 159 35 51 60°
BN.22.11 215 65 159 35 25 60°
BN.22.12 215 65 159 35 51 60°
BN.22 Single bullnose external angle to single bullnose on edge
and to bullnose single header on flat
BN.23 Single bullnose internal angle to single bullnose on edgeand to bullnose single header on flat
D D
B
A
C C
∞
R
Type A B C D R �
BN.23.1 215 102 159 101 25 30°
BN.23.2 215 102 159 101 51 30°
BN.23.3 215 65 159 101 25 30°
BN.23.4 215 65 159 101 51 30°
BN.23.5 215 102 159 70 25 45°
BN.23.6 215 102 159 70 51 45°
BN.23.7 215 65 159 70 25 45°
BN.23.8 215 65 159 70 51 45°
BN.23.9 215 102 159 35 25 60°
BN.23.10 215 102 159 35 51 60°
BN.23.11 215 65 159 35 25 60°
BN.23.12 215 65 159 35 51 60°
Mirror
AB
C
R
Type A B C R
BN.24.1 102 102 215 25
BN.24.2 102 102 215 51
AB
C
R
Type A B C R
PC.2.1 215 215 102 25
PC.2.2 215 215 102 51
PC.2.3 215 215 65 65
PC.2.4 215 215 65 65
R
D
B
C
A
Type A B C D R 1 2
MRD.3.1 215 108 65 85 25 1125 15
MRD.3.2 215 108 65 85 51 1125 15
MRD.3.3 215 108 65 92 25 1575 21
MRD.3.4 215 108 65 92 51 1575 21
MRD.3.5 215 108 65 94 25 1800 24
MRD.3.6 215 108 65 94 51 1800 24
1 Ideal outer radius (mm) 2no. per quadrantNote: Other sizes are also available.
BN
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 13
PS/SD - pistol and soldier bricks
British Standard brick specials
The use of soldier courses givesopportunities to break up mass and addinterest to large areas of brickwork, incomplementary or contrasting coloursand textures. This group allows the neatand effective detailing of soldiercourses around internal and external 90degree returns.
PS.1 Pistol soldier SD.2 Internal soldier returnto single cant on end
PS.2 Pistol stretcher(left or right hand - if surface has textured finish)
SD.3 External soldier returnto single cant on end
A
B
CD
E
Type A B C D E
PS.1.1 215 102 65 140 25
PS.1.2 215 102 65 65 25
PS.1.3 215 102 65 185 25
Type A B C D E
PS.2.1 215 102 65 35 20
D
A
C
B
E
SD.1 Soldier return
CB
A
Type A B C
SD.1.1 215 65 65
SD.1.2 215 102 102
D D
A
CB
E45˚45˚
Type A B C D E
SD.2.1 215 102 102 46 159
SD.2.2 215 102 102 60 173
D D
A
BC
E
B
A
C
D
E
Type A B C D E
SD.3.1 215 102 102 46 159
SD.3.2 215 102 102 60 173
MSD.1 External soldier return on end
Type A B C D E
MSD.1.1 215 215 102 65 10
MSD.1.2 215 326 102 102 10
14
MSD.2 External angle soldier on end
MSD.3 Internal angle soldier on end
MSD.4 External soldier return to single cant on end (also see angles and cant brick specials)
MSD.5 External angle soldier return to single cant on end (also see angles and cant brick specials)
MSD.6 Internal angle soldier return to single cant on end (also see angles and cant brick specials)
C
A
B
D
∞
B
A
D
C∞
Type A B C D �
MSD.2.1 215 65 102 23 45°
MSD.2.2 215 102 102 60 45°
Note: Other angles are also available.
Type A B C D �
MSD.3.1 215 65 102 107 45°
MSD.3.2 215 102 102 144 45°
Note: Other angles are also available.
Type A B C D E F �
MSD.5.1 215 159 102 102 46 60 45°
MSD.5.2 215 173 102 102 60 60 45°
B
DE
C
F
A
8
Note: Other angles are also available.
DC
A
B
E
F
8
Type A B C D E F �
MSD.6.1 215 107 102 65 46 159 45°
MSD.6.2 215 107 102 65 60 173 45°
Note: Other angles are also available.
BF
A
EG
D
C
Type A B C D E F G
MSD.4.1 215 177 159 46 65 102 10
MSD.4.2 215 177 173 60 65 102 10
PS/SD
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 15
PL - plinth bricks
British Standard brick specials
Plinth specials are often used to createa splay detail at the base of a building.They are also increasingly being usedfor corbel detailing and windowsurround details in association withangle and cant specials.
PL.1 Plinth stop or cant stop(left or right hand)
PL.2 Plinth header
PL.3.1.1 Oversize plinth stretcher
EF
AB
C
D
8
Type A B C D E F �
PL.1.1 215 102 65 9 159 46 45°
PL.1.2 215 102 65 23 173 60 45°
A
D
E
B
C 8
Left hand shown
CD
E
AB
8
Type A B C D E �
PL.3.1 215 102 65 9 46 45°
PL.3.2 215 102 65 23 60 45°
Type A B C D E �
PL.2.1 215 102 65 9 159 45°
PL.2.2 215 102 65 23 173 45°
PL.3 Plinth stretcher
Type A B C D E �
PL.3.1.1 215 158 65 9 102 45°
B
C
A
E
D 8
PL.3.2.1 Oversize plinth stretcher
B
C
A
E
D 8
A
F
B
C
D
E
8
Type A B C D E F �
PL.4.1 215 102 65 9 46 169 45°
PL.4.2 215 102 65 23 60 155 45°
Type A B C D E �
PL.3.2.1 215 144 65 22 102 45°
Left hand shown
PL.4 Plinth internal return - long(left or right hand)
16
PL.5 Plinth internal return - short(left or right hand)
PL.6 Plinth internal angle(left or right hand)
A
E
B
C
D
F
8
Type A B C D E F �
PL.5.1 215 102 65 9 159 46 45°
PL.5.2 215 102 65 23 173 60 45°
Left hand shown
45˚
C
B
F
D
AE
8
Type A B C D E F �
PL.6.1 1641 102 65 9 51 46 30°
PL.6.2 1641 102 65 23 51 60 30°
PL.6.3 1641 102 65 9 51 46 45°
PL.6.4 1641 102 65 23 51 60 45°
PL.6.5 1641 102 65 9 51 46 60°
PL.6.6 1641 102 65 23 51 60 60°
PL.6.7 1592 102 65 9 102 46 30°
PL.6.8 1592 102 65 23 102 60 30°
PL.6.9 1592 102 65 9 102 46 45°
PL.6.10 1592 102 65 23 102 60 45°
PL.6.11 1592 102 65 9 102 46 60°
PL.6.12 1592 102 65 23 102 60 60°
PL.6.13 2151 102 65 9 102 46 30°
PL.6.14 2151 102 65 23 102 60 30°
PL.6.15 2151 102 65 9 102 46 45°
PL.6.16 2151 102 65 23 102 60 45°
PL.6.17 2151 102 65 9 102 46 60°
PL.6.18 2151 102 65 23 102 60 60°
Left hand shown
1Suitable for half bond without cutting
2Suitable for quarter bond without cutting
A
E
CD
B
F
45˚
8
Type A B C D E F �
PL.8.1 1592 102 65 9 102 46 30°
PL.8.2 1592 102 65 23 102 60 30°
PL.8.3 1592 102 65 9 102 46 45°
PL.8.4 1592 102 65 23 102 60 45°
PL.8.5 1592 102 65 9 102 46 60°
PL.8.6 1592 102 65 23 102 60 60°
PL.8.7 2151 102 65 9 102 46 30°
PL.8.8 2151 102 65 23 102 60 30°
PL.8.9 2151 102 65 9 102 46 45°
PL.8.10 2151 102 65 23 102 60 45°
PL.8.11 2151 102 65 9 102 46 60°
PL.8.12 2151 102 65 23 102 60 60°
Left hand shown
1 Suitable for half bond without cutting
2 Suitable for quarter bond without cutting
A
E
C
D
F
B
8
Type A B C D E F �
PL.7.1 215 102 65 9 159 46 45°
PL.7.2 215 102 65 23 173 60 45°
Left hand shown
A
E
C
D
B
F
45˚
8
Type A B C D E F �
PL.9.1 164 102 65 9 51 46 30°
PL.9.2 164 102 65 23 51 60 30°
PL.9.3 164 102 65 9 51 46 45°
PL.9.4 164 102 65 23 51 60 45°
PL.9.5 164 102 65 9 51 46 60°
PL.9.6 164 102 65 23 51 60 60°
Left hand shown
PL.8 Plinth external return(left or right hand)
PL.7 Plinth external return(left or right hand)
PL.9 Plinth squint(left or right hand)
PL
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 17
MRD.2 Radial plinth header (also see radial brick specials)
MPL.3 Wide bed plinth stretcher
MPL.5 Wide bed plinth internal return
MPL.4 Wide bed plinth external return(left or right hand)
D
B
C
AF
E
Type A B C D E F 1 2
MRD.2.1 215 108 65 85 159 9 1125 15
MRD.2.2 215 108 65 85 173 23 1125 15
MRD.2.3 215 108 65 92 159 9 1575 21
MRD.2.4 215 108 65 92 173 23 1575 21
MRD.2.5 215 108 65 94 159 9 1800 24
MRD.2.6 215 108 65 94 173 23 1800 24
1 Ideal outer radius (mm)2No. per quadrant
Note: Other angles also available.
MPL.1 Plinth header faced on end(left or right hand)
MPL.2 Plinth stretcher faced on end(left or right hand)
B
C
A
D
E
45°
Type A B C D E
MPL.3.1 215 158 65 9 102
MPL.3.2 215 144 65 23 102
A
C
B
D
EF
45°
Type A B C D E F
MPL.4.1 271 158 65 9 215 102
MPL.4.1 257 144 65 23 215 102
Left hand shown
G
E
C
DF
A B
Type A B C D E F G
MPL.5.1 215 215 158 57 102 9 65
MPL.5.2 215 215 144 71 102 23 65
PL - plinth bricks
A
C
B
D
E
45°
Type A B C D E
MPL.1.1 215 102 65 9 159
MPL.1.2 215 102 65 23 173
Right hand shown
B
C
A
D
E
45°
Type A B C D E
MPL.2.1 215 102 65 9 46
MPL.2.2 215 102 65 23 60
Right hand shown
18
MPL.8 Wide bed stretcher
MPL.9 Wide bed external angle(left or right hand)
MPL.10 Wide bed internal angledog leg (left or right hand)
B
D
A
C
8
Type A B C D �
MPL.9.1 215 158 65 102 45°
MPL.9.1 215 144 65 102 45°
Note: Other angles are also available.
Left hand shown
AB
C
Type A B C
MPL.8.1 215 158 65
MPL.8.2 215 144 65
B A
D
C
8
D
B
C
E
A
45˚
Type A B C D E
MPL.11.1 215 158 65 9 102
MPL.11.2 215 144 65 23 102
Type A B C D �
MPL.10.1 215 158 65 102 45°
MPL.10.1 215 144 65 102 45°
Note: Other angles are also available.
Left hand shown
Left hand shown
MPL.11 Wide bed plinth stretcherfaced on side (left or right hand)
MPL.6 Wide bed plinth external angle(left or right hand)
MPL.7 Wide bed plinth internal angle(left or right hand)
C
B
E
A
D
F
8
45°
Type A B C D E F �
MPL.6.1 215 158 65 9 102 102 45°
MPL.6.1 215 144 65 23 102 102 45°
Note: Other angles are also available.
Left hand shown
AE
B
C
F
D45˚
8
Type A B C D E F �
MPL.7.1 215 158 65 9 102 102 45°
MPL.7.1 215 144 65 23 102 102 45°
Note: Other angles are also available.
Left hand shown
PL
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 19
RD - radial bricks
British Standard brick specials
Radial specials are primarily used toform circular detail brickwork in plan,without having tapered joints. They alsogive a true, concise curve to brickworkwithout the unattractive stepping thatwould otherwise be seen if standardfacing bricks were used.
RD.3 Radial stretcher
RD.4 Radial stretcher
Type A B C D 1 2
RD.1.1 215 108 65 52 450 6
RD.1.2 215 108 65 70 675 9
RD.1.3 215 108 65 80 900 12
RD.1.4 215 108 65 89 1350 18
RD.1.5 215 108 65 97 2250 30
RD.1.6 215 108 65 103 5400 72
Mirror
1 Ideal outer radius (mm)2No. per quadrant
Note: Dimensions B and D in types RD.1 are segmentedlengths, measured from corner to corner, not along curve.
AB
D
C
RD.2 Radial stretcher
A
D
B
C
R1
R1
A
C
B
Type A B C D 1 2
RD.2.1 226 102 65 172 450 3
RD.2.2 226 102 65 190 675 4.5
RD.2.3 226 102 65 199 900 6
RD.2.4 226 102 65 208 1350 9
RD.2.5 226 102 65 215 2250 15
RD.2.6 226 102 65 221 5400 36
1 Ideal outer radius (mm)2No. per quadrant
Note: Dimensions A and D in types RD.2 are segmented lengths,measured from corner to corner, not along curve.
*Denotes chord length
Type A* B C R1
RD.3.1 215 102 65 250
RD.3.2 215 102 65 500
RD.3.3 215 102 65 750
RD.3.4 215 102 65 1000
RD.3.5 215 102 65 1250
Mirror
R1
R1
AB
C
*Denotes chord length
Type A* B C R1
RD.4.1 215 102 65 250
RD.4.2 215 102 65 500
RD.4.3 215 102 65 750
RD.4.4 215 102 65 1000
RD.1 Radial header
20
MRD.1 Radial header
MRD.3 Radial bullnose header(also see bullnose brick specials)
MRD.4 Radial stretcher
D
B
C
A
Type A B C D 1 2
MRD.1.1 215 108 65 85 1125 15
MRD.1.2 215 108 65 92 1575 21
MRD.1.3 215 108 65 94 1800 24
1 Ideal outer radius (mm)2No. per quadrant
D
B
C
AF
E
Type A B C D E F 1 2
MRD.2.1 215 108 65 85 159 9 1125 15
MRD.2.2 215 108 65 85 173 23 1125 15
MRD.2.3 215 108 65 92 159 9 1575 21
MRD.2.4 215 108 65 92 173 23 1575 21
MRD.2.5 215 108 65 94 159 9 1800 24
MRD.2.6 215 108 65 94 173 23 1800 24
1 Ideal outer radius (mm)2No. per quadrant
Note: Other sizes are also available.
R
D
B
C
A
Type A B C D R 1 2
MRD.3.1 215 108 65 85 25 1125 15
MRD.3.2 215 108 65 85 51 1125 15
MRD.3.3 215 108 65 92 25 1575 21
MRD.3.4 215 108 65 92 51 1575 21
MRD.3.5 215 108 65 94 25 1800 24
MRD.3.6 215 108 65 94 51 1800 24
1 Ideal outer radius (mm)2No. per quadrant
Note: Other sizes are also available.
MRD.2 Radial plinth header(also see plinth brick specials)
D
BA
C
1 Ideal outer radius (mm)2No. per quadrant
Type A B C D 1 2
MRD.4.1 226 102 65 204 1125 7.5
MRD.4.2 226 102 65 210 1575 10.5
MRD.4.3 226 102 65 212 1800 12
RD
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 21
AR - arch bricks and arch systems
British Standard brick specialsArch or tapered bricks are used to form semi-circular, bulls eye, segmental or other formsof decorative arch units to several differentradii specified in the standard.
Our pre-packaged arch sets make theconstruction of traditional voussoir-stylewindow and door arches simple and accurate.
Although purpose made specials have alwaysbeen available, they have, in the past, onlybeen produced to order. This is especiallytrue of arches.
We have now enhanced this facility bymanufacturing a wide choice of classic archsets that can usually be delivered direct to sitewithin three weeks from acceptance of order.
AR.1 Tapered header
AR.2 Tapered stretcher
BA
D
C
Type A B C D 1 2 3
AR.1.1 215 102 75 59 910 4 20/21
AR.1.2 215 102 75 64 1360 6 28/29
AR.1.3 215 102 75 66 1810 8 36/37
AR.1.4 215 102 75 69 2710 12 53/54
Type A B C D 1 2 3
AR.2.1 215 102 75 48 910 4 25
AR.2.2 215 102 75 55 1360 6 33
AR.2.3 215 102 75 58 1810 8 41
AR.2.4 215 102 75 63 2710 12 58
Mirror
Mirror
1 Ideal span (mm) 2No. of whole bricks 3Bricks in semi-circle
1 Ideal span (mm) 2No. of whole bricks 3Bricks in semi-circle
Note: This format is not as versatile in applications as AR.1series because the longer voussoir joint accentuates splays.Tolerance allowances limit versatility further.
CA
D
B
Arch Type 1
0
BA
A
Dim 0 Dim B A 1
488 18 215 6
630 10 215 8
915 145 215 10
1200 130 215 14
1500 130 215 18
1750 80 215 22
1800 130 215 22
2250 130 215 28
2350 80 215 30
2400 130 215 30
Dim 0 - window openingDim B - keystone1No. of standard units
Note: All arches are available as individualbricks or pre-cast units.
22
KS. Keystones - to suit any size span
0
B
A
A1
Dim 0 Dim B A A1 1
488 18 215 290 6
630 10 215 290 8
915 145 215 290 10
1200 130 215 290 14
1500 130 215 290 18
1750 80 215 290 22
1800 130 215 290 22
2250 130 215 290 28
2350 80 215 290 30
2400 130 215 290 30
Dim 0 - window opening Dim B - keystone 1No. of standard units
Note: All arches are available as individual bricks or pre-cast units.
A
0
Dim 0 - window opening1No. of standard units
Note: Guideline for number of units required.Window openings up to 1800mm use tapered bricks.All arches are available as individual bricks or pre-cast units.
Dim 0 A 1
915 215 17
1500 215 24
1800 215 26
2250 215 31
Arch Type 2
Curved arch
A1
D3
B2
C
70˚
A1
D3
B2
C
70˚
A1
D3
B2
C
70˚
KS.2chamfered
KS.1flat
KS.3extended
Note: KS.3 B2 dimension = 290mm.Keystones are sized to suit the particular span requirements.Dimension A1 and D3 will change according to the span.For further clarification regarding dimensions of brick unitsplease contact our sales staff.
Note: For Dimensions of prefabricated arches see chart for archtype 2 on P27. Other sizes can also be manufactured as required.
A
0
B
A1
Type A1 B2 C D3
U143 10 215 102 125
U77 30 215 102 140
U144 70 215 102 185
U79 100 215 102 215
U78 130 215 102 240
U80 140 215 102 250
F
D
AB
C
E
1 Ideal span (mm)
Note: Other sizes are also available.
Type A B C D E F 1
MAR.1.1 215 102 75 33 159 46 450
MAR.1.2 215 102 75 33 173 60 450
MAR.1.3 215 102 75 51 159 46 1125
MAR.1.4 215 102 75 51 173 60 1125
MAR.1.5 215 102 75 42 159 46 675
MAR.1.6 215 102 75 42 173 60 675
MAR.1.7 215 102 75 60 159 46 2025
MAR.1.8 215 102 75 60 173 60 2025
Pre-fabricated arches
MAR.1 Tapered single cant
AR
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 23
MAR.2 Tapered single bullnose
D
AB
C
R
1 Ideal span (mm)
Note: Other sizes are also available.
Type A B C D R 1
MAR.2.1 215 102 75 33 25 450
MAR.2.2 215 102 75 33 51 450
MAR.2.3 215 102 75 51 25 1125
MAR.2.4 215 102 75 51 51 1125
MAR.2.5 215 102 75 42 25 675
MAR.2.6 215 102 75 42 51 675
MAR.2.7 215 102 75 60 25 2025
MAR.2.8 215 102 75 60 51 2025
A
BC
a˚
Type A B C �
MAR.3 215 102 65 75°
Left hand shown
MAR.4 Flat arch keystone
C
A
D
B
8
C
DE
A
B
8
Type A B C D � 1 2
MAR.4.1 215 102 212 55 70° 675 8
MAR.4.2 215 102 287 130 70° 900 10
MAR.4.3 215 102 212 55 70° 1125 14
MAR.4.4 215 102 287 130 70° 1350 16
MAR.4.5 215 102 212 55 70° 1575 20
MAR.4.6 215 102 287 130 70° 1800 22
MAR.4.7 215 102 212 55 70° 2025 26
Type A B C D � 1 2
MAR.5.1 215 102 212 55 70° 675 8
MAR.5.2 215 102 287 130 70° 900 10
MAR.5.3 215 102 212 55 70° 1125 14
MAR.5.4 215 102 287 130 70° 1350 16
MAR.5.5 215 102 212 55 70° 1575 20
MAR.5.6 215 102 287 130 70° 1800 22
MAR.5.7 215 102 212 55 70° 2025 26
1 Ideal span (mm) 2No. of voussoirs
1 Ideal span (mm) 2No. of voussoirs
MAR.6 Flat arch cant voussoir(left or right hand)
MAR.3 Flat arch voussoir(left or right hand)
MAR.5 Flat arch chamferededge keystone
D
BC
A
8
Type A B C D �
MAR.6 215 102 65 46 75°
Left hand shown
AR - arch bricks and arch systems
24
C
DE
A
B
8
C
DE
A
B
8
Type A B C D E � 1 2
MAR.7.1 215 102 212 55 46 70° 675 8
MAR.7.2 215 102 287 130 46 70° 900 10
MAR.7.3 215 102 212 55 46 70° 1125 14
MAR.7.4 215 102 287 130 46 70° 1350 16
MAR.7.5 215 102 212 55 46 70° 1575 20
MAR.7.6 215 102 287 130 46 70° 1800 22
MAR.7.7 215 102 212 55 46 70° 2025 26
1 Ideal span (mm)2No. of voussoirs
Type A B C D E � 1 2
MAR.8.1 215 102 212 55 46 70° 675 8
MAR.8.2 215 102 287 130 46 70° 900 10
MAR.8.3 215 102 212 55 46 70° 1125 14
MAR.8.4 215 102 287 130 46 70° 1350 16
MAR.8.5 215 102 212 55 46 70° 1575 20
MAR.8.6 215 102 287 130 46 70° 1800 22
MAR.8.7 215 102 212 55 46 70° 2025 26
1 Ideal span (mm)2No. of voussoirs
MAR.7 Flat cant keystone MAR.8 Flat arch cant andchamfered keystone
AR
Branches: Ringmer Lewes Petworth Thanet Chertsey Great Bookham • www.chandlersbs.co.uk 25
Hanson Building Products222 Peterborough RoadWhittleseyCambridgeshirePE7 1PDTel: 08705 258258Fax: 01234 762040Email: [email protected]/uk/brickspecials
For brick technical advice, sales enquiriesand samples: Tel: 08705 258258
Quality Assured
Q5001
Hanson UKHanson is one of the UK’s largest suppliers of construction materials. Our products includeaggregates, asphalt, ready-mixed concrete,bricks, blocks and cement. We are part of theHeidelbergCement Group, which employs61,000 people across five continents and is the global leader in aggregates and hasleading positions in cement, concrete andheavy building products.
This brochure is printed on Satimat Silk, an FSC certified product.Contains ECF pulp sourced from well managed and sustainable forests.
All dimensions are in mm, drawings not to scale and all sizes nominal.The colours in this brochure are as true as can be obtained by the normalprinting process. Hanson is committed to a program of continuous productdevelopment and reserve the right to alter specifications without priornotification. For further product information or assistance pleasecall 08705 258258.
CHANDLERS BRANCHES
RINGMERThe Broyle, Ringmer, East Sussex BN8 5NP
Tel: 01273 812721 • Fax: 01273 813958
Email: [email protected]
THANETOcivan Way, Off Star Lane, Westwood, Margate, Kent CT9 4NN
Tel: 01843 808250 • Fax: 01843 280082
Email: [email protected]
LEWESChandlers House, Daveys Lane, Lewes, East Sussex BN7 2BQ
Tel: 01273 471188 • Fax: 01273 478574
Email: [email protected]
CHERTSEY36-38 Station Road, Chertsey, Surrey KT16 8BE
Tel: 01932 560812 • Fax: 01932 570411
Email: [email protected]
PETWORTHHeath End, Duncton, Petworth, West Sussex GU28 0JG
Tel: 01798 342000 • Fax: 01798 343908
Email: [email protected]
GREAT BOOKHAMLeatherhead Road, Great Bookham, Surrey KT23 4ST
Tel: 01372 458246 • Fax: 01372 458900
Email: [email protected]
www.chandlersbs.co.uk