brief profile of hod - upes.ac.in · pdf filenotable visiting faculty 1- topic –geometry...

Brief Profile of HoD

Name: Dr. Sushabhan Choudhury

Designation: Sr. Associate Professor and Head of

the Department

Work Experience: 26 Years

Educational Qualifications: Ph.D, M.Tech (Gold

Medalist) Electronics Design and Technology,

B.Tech. (Electronics & Telecommunication

Engineering) Area of specialization: Nanotechnology, Wireless

Sensor Networks, Wearable Technology, Robotics

Engineering.

Notable Achievements: Awarded outstanding

scientist of the twenty first century by Cambridge

Biographical Centre, UK. Selected in the who’s who

of the world in science by Marquis Who’s Who,

USA. Delivered invited talks, chaired technical

sessions and Technical committee member for

several international conferences. No. of Publications: Book- 1 ( Accepted for

publication), Book Chapters- 2, Papers: 50 (SCI –

10, SCOPUS – 25) No. of Patents: 07

Affiliated to various societies like ISTE etc.

Editor: Springer - ICICCD, JOVDT

Projects: RISE-3, AICTE- 1 total cost- 20 Lacs

Faculty list of each Program/ department

Name: Dr. Ranjan Mishra

Designation: Associate Professor and Program Head

Educational qualifications: Ph. D. M. Tech

Area of specialization: Telecommunication Engineering,

Microstrip Antenna Design

No. of Publications: Book – 1, Book Chapter – 3, Journal – 12

(Scopus 6), International Conference 10.

Name: Dr. N. Prasanthi

Designation: Associate Professor & Lab coordinator

Educational Qualifications: PhD

Area of Specialization: Antenna Design & Metamaterials

Notable Achievements: sessions chaired in conference: 3

No. of Publications: Journals (Scopus): 3 ; Conferences : 5

Affiliation with various societies: Member: IEEE- 92070555,

(MEM in APS,MTT&WIE)

Name: Dr. Rajesh Singh

Designation: Assistant Professor (Selection Grade) & Head

Institute of Robotics Technology (R&D)

Educational Qualifications: Ph.D, M.Tech (Gold Medalist),

B.Tech

Area of Specialization: Embedded System, Wireless sensor

networks, Robotics

Total Experience- 14 years

Notable Achievements: Young Investigator Award, Sessions

chaired in conference: 4, invited lectures/talks: 6, Technical

committee member: 3, Exemplary work award: 3, Laureate

award for excellence in Robotics engineering: 2, Certificate of

Excellence from 3rd faculty branding awards-2015, Convener

for sessions at international/national conferences- 04

Invited Lectures-06

No. of Publications: Book- 1, Book Chapters- 3, International

Journal- 50(scopus indexed-25), International conference- 27,

National conference- 7

No. of Patents filed: 06

Affiliation with various societies: Member IEEE-Society of

Robotics & Automation, Associate member UACEE, Member

of Editorial Board: IJEAT

Editor: AISC book series Springer – ICICCD2016

Projects: RISE 2015 : 11, RISE 2016-11

Name: Dr. Paawan Sharma

Designation: Assistant Professor – Selection Grade

Educational qualifications: Ph.D., M.Tech. B.E.

Area of specialization: Signal and Image Processing, Machine

Vision, Pattern recognition

Notable Achievements: GATE, DST-ITS, DGFS, VIFA

young faculty Award

No. of Publications: 12

Affiliation with various societies: IEEE, IAENG member

Name: Dr. Mukul Kumar Gupta

Designation: Assistant Professor – Senior Scale

Educational qualifications: PhD, M. Tech (Control System) ,

B. Tech (Electronics and Instrumentation)

Area of specialization: Robotics and Automation, Nonlinear

Dynamics and Control, Graph Theory for Multi agent system,

Intelligent Control

Notable Achievements: Received Research Award from

UPES, Young Faculty award, GATE , Technical committee

member: 04

No. of Publications: 4 journal (2 SCI), Conference (9

International, 01 National)

Affiliation with various societies: Member innovation and

entrepreneurship cell, IAENG, Member Rexroth- Bosch

Automation Centre

Name: Dr. Adesh Kumar


Educational qualifications: Ph.D (Electronics Engineering),

M.Tech(Hons) Embedded Systems Technology, B.Tech

(Electronics & Communication Engineering)

Area of specialization: VLSI Design, Network on Chip,

Embedded System Design

Notable Achievements: UPES R & D Awards, 2014, 2016

No. of Publications: 30 International Journals, 9 International

Conferences, 02 National Conferences

No. of Patents applied: 01

Affiliation with various societies: Reviewer Wireless Personal

Communication Journal, Springer SCIE indexed, TPC Member

of 6 International Conferences, NCCS-2015, MCCS-2015,

NGCT-2015, NGCT 2016, Indiacom-2016, Conference

Secretary- ICICCD 2016

Name: Dr. Amit Kumar Mondal


Educational qualifications: Ph.D

Area of Specialization: Robotics and Automation

Notable achievements: 2 time recipient of International travel

support from SERB-ITS (2015), Completed 1 DST-SERB

funded project in 2015. Completed 3 internal seed fund

projects worth total Rs 11.98 lakhs

No. of Publications: Journals: 6 SCI , 1 Scopus

Conferences (all international): 10


Affiliation with various societies: 2 (IEEE, ASME) Member:

IEEE-P2660-1, Working Group Member

Name: Dr. R.K. Pachauri

Designation: Assistant Professor – SS

Educational qualifications: Ph. D

Area of Specialization: Control schemes of hybrid power

generation systems- Renewable energy

No. of Publications: 12 and IEEE/Springer sponsored

conferences-25 (All international)

Name: Mr. Raj Gaurav Mishra

Designation: Assistant Professor – Selection Grade

Educational Qualifications: MS (Space Engineering), BE

(Electronics and Instrumentation Engineering)

Area of Specialization: Electronics and Communication

Engineering, Wireless Sensor Networks

Notable Achievements: Received Indo-Swiss Joint Research

Fellowship during Nov 2011 to Feb 2012.

No. of Publications: International Journals: 15, Book: 01, Book

Chapters: 02, International Conference Papers: 01

Name: Mr. Vivek Kaundal


Educational Qualifications: Phd-Pursuing, M.Tech (Digital

Communication), B.TECH Electronics & Communication

Engg.

Area of Specialization: Wireless Sensor Networks

Notable Achievements: Sanctioned R&D project From Govt of

India DST- Science and Engineering Research Board.

Awarded “Young Investigator award” in the field of robotics

in 2012 . Certified in RF Planning & Optimization (2009)



Affiliation with various societies: Member IEEE

Name: Mr. Arpit Jain


Educational qualifications: Pursuing PhD, M.E. and B.E. (EIC)

Area of Specialization: Fuzzy logic and application in control

system, Control theory, SCADA and PLC

Notable Achievements: GATE Qualified (AIR-419 in 2007)

No. of Publications: (including national and international

conferences and journals): 5


Affiliation with various societies: member of IACSIT, Guest

reviewer for Taylor & Francis Autosoft journal, and Journal of

testing and evaluation by ASTM international

Projects: RISE 2015 : 1 project selected and won award

Name: Mr. Roushan Kumar


Educational Qualifications: M. Tech ( Automotive

Electronics), PHD Pursuing

Area of Specialization: Automotive Electronics, Vehicle

Infotronics and Industrial Automation

Notable Achievements: Industry Certified trainer for

Industrial Automation @ Bosch Rexroth and Automotive

Electronics @ KPIT Technologies Ltd

No. of Publications: International Conferences and Scopus

Journals: 8

Affiliation with various societies: Member IEEE and SAE

Projects: RISE 2015 : 1 project selected and won award

Name: Mr. Tarun Kumar


Educational qualifications: M.Tech (Communication Systems

& Signal Processing), PhD (Thesis Submitted)

Area of Specialization: Antenna & Microwave Engineering,

Metamaterials

No. of Publications: 5 Journals, 5 International Conferences

Affiliation with various societies: Life Member of The

Institution of Electronics & Telecommunication Engineers,

New Delhi

Name: Mr. Abhishek

Designation: Assistant Professor

Educational qualifications: B.Tech, M.Tech

Area of Specialization: Robotics, Control, Optimization,

Microfluidic.

Notable Achievements: Reviewer of IEEE-EEEIC 2016

conference held in Italy



Name: Mr. Bhanprakash Goswami


Educational Qualifications: M.Tech.(IIT Kanpur)

Area of Specialization: Analog Circuit Designing, Photovoltaic

Technology

Name: Mr. Deepak Kumar


Educational Qualifications: Ph.D.(Pursuing), M.Tech, B.Tech

Area of Specialization: VLSI, Microelectronics & Electron

Devices

Notable Achievements: IEEE coordinator-UPES

No. of Publications: (international conferences – ICICCD

2016) - 3

Name: Mr. Rajarao Manda


Educational Qualifications: M Tech (IIT Kharagpur)

Area of Specialization: Telecommunication System

Engineering

No. of Publications: 2 (1- international journal and 1-

international conference(IEEE))

Name: Mr. Salauddin Mohammad


Educational Qualifications: PhD (Pursuing), M.Tech (VLSI

system Design), B.Tech (ECE)

Area of Specialization: VLSI System Design, IEEE 802.16e

Design, Advanced level Digital System Design

Notable Achievements: GATE Qualified

No. of Publications: National conference:03; International

Conference: 01; International Journal(Scopus Indexed): 05( 4

published, 1 accepted)

Affiliation with various societies: Member IEEE

Name: Mr. Beporam Khaleelu Rehman


Educational Qualifications: Pursuing PhD, M.Tech. (VLSI)

B.Tech. (ECE)

Area of Specialization: VLSI Design

No. of Publications: International Conference:3,International

Journals:2

Name: Mr. Vinay Chowdhary


Educational qualifications: Pursuing PhD, M.Tech. (DE)

B.Tech. (ECE)

Area of Specialization: Wireless Sensor Networks, Digital

Electronics, Microprocessors & Microcontrollers

Notable Achievements: Cleared UGC NET-2013,


Affiliation with various societies: (eg. Editor for some

international journals, member of some international society

etc.)

Name: Ms. Anita


Educational Qualifications: Ph.D.(Pursuing), M.E, B.Tech

Area of specialization: Embedded System, Wireless sensor

networks

Total Experience- 10 years

Notable achievements: chaired session in conference: 4,

Exemplary work award, Certificate of Excellence from 3rd

faculty branding awards-2015, Convener for sessions at

international/national conferences- 03

No. of Publications: Book- 1, Book Chapters- 3, International

Journal- 34 (scopus indexed-20),, International conference- 14,

National conference- 4

No. of Patents filed: 06

Conference Secretary – ICICCD-2016

Affiliation with various societies: IEEE, ISTE

Projects: RISE 2015 : 8, RISE 2016-8

Workshops conducted/attended- 10

Name: Ms. Isha Kansal


Educational Qualifications: M.Tech (Engg. Physics)

Area of Specialization: Engineering Physics

Name: Mr. Abhinav Sharma


Educational Qualifications: Ph.D. (Thesis submitted), M.

Tech., B. Tech.

Area of Specialization: Smart Antennas, Signal Processing and

Communication Notable achievements: Gate Qualified

No. of Publications: 2 (1-SCI Indexed Journal and 1-IEEE

sponsored International Conference)

Notable Visiting Faculty

1- Topic –Geometry of solar radiation and its Modelling , Date -19/9/2014, 10 to 11 and 11.30 to 12.30 hour , Dr. Arun

Kumar Singh from VNIT Nagpur, Attendees-50

2- Topic – Dynamics of Physical and Mechanical System, Date- 20/08/2014 ,12 to 2 PM , Dr. Arun Kumar Singh from

VNIT Nagpur, Attendees-50

3- Guest lecture on “Kinematics and Dynamics of Robot Manipulator” by Professor N. Sukavanam from IIT Roorkee,

April, 17, 2015.

4- “Modern practices of process instrumentation in power industry”, 18th April 2015, Chetan Agarwal , Siemens

India, Attendees-45

5- Expert lecture on “Internet of things” by Mr. Madhukant Patel-former scientist ISRO, in June 2015.

6- Expert lecture on “Hybrid electric vehicle” by Dr. Hari OM Bansal, BITs, Pilani, august 2016.

7- Expert lecture on “Recent trends in electronics jobs” by Mr. Amit Gupta, Manager-HCL, June 2016.

8- Expert lecture on “Automobiles” by Yogesh Kalia, MD- Medhavi Institute of automotive research, 2014.

9- Expert lecture on “Future Trends in Embedded system” by Prof. D.V.Gadre, NSIT, New Delhi, 2014.

10- Expert lecture on “ARM processor based SoC” by Mr. Ankur Kumar, ST Microelectronics, Delhi, 2016

11- Expert lecture on “Importance of ‘C’ in Embedded system”, Mr. Vishnu Kumar Gupta, NIIT Technologies, Greater

Noida, 2016

Infrastructure

Department of Electronics, Instrumentation and control Engineering is offering technology oriented

courses and creating manpower in the strategic areas well compatible with the industrial expectations.

The principal vision of the department is to mould tomorrow’s technocrats by imbibing the essence of

human values for innovation and creativity in science and technology in the direction of building a quiet

self-sustaining Nation. Further, to set ethics in teaching and learning persistently for making a bright

career pathway for the students and to establish state-of-the-art center for excellence in research.

Highlights of some important LABS

Center of Excellence

1. Bosch Rexroth 2. CISCO Academy

-Hydraulics & Pneumatic Lab

-PLC & Drive Lab

-Robotics & Mechatronics Lab

-Sensors Lab

- Advanced Communication Lab

-Networking Lab

-VLSI Lab

-IOT Lab

- Broadband Lab

-Advanced Controllers Lab

Program Committee

The Department of Electronics ,Instrumentation and Control Engineering is currently having the following branches

1- B. Tech in Electronics Engineering

2- B. Tech in Electronics and Instrumentation Engineering

3- M. Tech In Robotics Engineering

4- B.Tech in Electronics Engineering with specialization in IOT based Instrumentation

5- B.Tech in Electronics Engineering with specialization in Broadband Communication

These branches are having their curriculum as per the industry needs. From time to time there is a continuous up gradation in the

course grid of each of the subject. For this the department is calling various experts from academic Institute and Industry.

The following experts have contributed for the curriculum development. Apart from this feedback from students also have been

taken.

1- Dr. M V Kartikeyan IIT Roorkee

2- Mr. Amit Gupta Group Manager HCL Delhi

3- Prof. N Sukavanam, Professor IIT Roorkee

4- Mr. Rajvir Singh, NFI Chandigarh

5- Dr. Manish Prateek , Associate Dean CIT, UPES

6- Mr Deepak Bhardwaj , ME Deptt. UPES

7- Dr. Ajay Kumar , CIT. UPES

Event & Activities –IEEE Student Chapter

EVENT 1 – FUN EVENT – FIFA 14

EVENT 2 on engineer’s day 15 sept

Competitions

1. Project Titled

“Autonomous rescue

Robot” has been

selected in

“Uttarakhand State

Science and

Technology Congress”

by Ex-M. Tech

Robotics Student Mr.

Abhishek Sharma under the guidance of

Mr. Vivek Kaundal 2. Project titled

“CAR’S

Thermoregulation and

Security System” got

selected in

competitions

conducted by Texas

Instruments Innovation

design challenge for

students.Team

members: (M.Tech

students ) P. Swami

Sairam , Richa

Singh, Meera C S, N

Sunil Sunny, Parag

Verma

Electronics Designs and future trends

Alumni Speak (Photo of Student, Testimonials, Name of Student, Name

of Program, Batch) – Preferred (student from each year)

My name is Durgesh Gupta. I am currently in Embedded Profession as an

Embedded Engineer (R&D) in Kritikal Solutions

Private Ltd. I am originally from Aligarh and had completed my bachelors in

Electronics engineering from UPES in the batch of 2010 - 2014. Further my fascination

for this area of study became more intense when I was introduced to Embedded in my

1st year of engineering by the faculty of Electronics Department. Through the

motivation, support and encouragement given by my teachers and professors in the

department I was able to involve myself in various trainings, participated in many

competitions and also in the delivering of various technical workshops. Not only to

theoretical knowledge but here the department of Electronics Engineering gives

emphasis to Practical knowledge also. To tip it all, I got a chance to work in an

embedded company. This was only possible because of the infrastructure and support

provided by the department. Above all this, it was possible by GODs amazing grace.

Studying here at Upes, it was a journey of gaining learning for a lifetime. It was a big

stepping stone for today where I stand working at the best and most valuable in the world,

Apple as Asic Design Engineer, it not only makes me proud but the

credit goes to my Alma matter where the foundation for learning was laid for me by the

well versed faculty of my department. I would like to shout out a big Thank you to my

college, department and hope they keep imparting the knowledge curve to the future

generations.

SAMAKSH KAPOOR

Apple, USA

It was a pleasure for me to be in such a great campus with you all. I want to thank all the

faculty members from electronics dept. who helped me to achieve my goal. Special Thanks

to Mr. Rajesh Singh, Mr. Vivek Kaundal, Mr. Pawan Sharma and Mr. Roshan Kumar and

each faculty member in electronics dept. for providing me Practical knowledge in every

covering subjects. I want to thank UPES for providing me the respect and knowledge to

grow up in my life.

VINAY GAHTORI

DELL, Banglore

The electronics department has been wonderful to me! When I came to UPES, all I knew

was that I was interested in electronics and wanted to get a degree in electronic

engineering. But UPES helped me better understand my passions and things that excited

me about electronics. Not only did I learn a vast amount of things academically, UPES

also helped me develop my confidence and that I could successfully pursue a career in my

chosen field. With the help of my professors here and the encouraging atmosphere within

the campus I was able to graduate from UPES as the top scorer from my batch as well as

realize my dream of gaining admission into Georgia Tech University as a student of

Masters in Electronics. UPES helped me focus my energies into achieving the things that I

wanted to and provided me with a wonderful platform to do the same and for that I will

always be grateful to this place and everybody associated with it.

PRAKSHI RASTOGI

I am a 2009-13(Electronics Engineering) pass-out from U.P.E.S, Dehradun. It gives

me immense pleasure to have been given this opportunity to share my experiences

about UPES; where dreams come true. Electrical & Electronics Department of

COES has helped me a lot to overcome the hurdle and achieve my desired success in

Professional career. I would like to take this opportunity to praise my faculty

members and other senior faculties who have always helped me in achieving my

dreams and stand out of the crowd in this world of competition. More than studies, it

has always been the motivation and extra-curricular activities which always inspired

me to take up challenges and always come out with an innovative solution. Studying

at UPES is a different learning experience which only few other top universities

provides in India. I would always be grateful and proud to be an Alumni member of

UPES! Not to mention faculties have always been extra-supportive and caring and

helped us in reaching out to this competitive world with the right mix of knowledge

and student enhancement programs.

Arka Prabha Dalapati

|Deputy Manager, Strategic Marketing & Brand|

VE Commercial Vehicles Ltd. (A Volvo Group and Eicher Motors joint venture)|

I was a M.Tech (Robotics Engineering) student in UPES(2013-15) batch. I was in EIC

department, it had very good and supportive faculty members who gave deep knowledge

about the stream. They gave practical aspects of the subjects such that we can apply that

in the real world and the challenges which we will face in the real time machine. Our labs

gave all the learning which we are applying in the industries now. My special thanks to

Sushabhan Sir, Rajesh Sir, Vivek Sir, Pawan Sir and all members for all their

academic support throughout my college tenure.

With kind regards

Vishal Ojha Research Engineer Industrial Robotics Hi-Tech Robotics, Pune

Electronics and Instrumentation dept. encourages students to be a part of practical

learning, apart from curricular activities, This dept. give emphasis on learning on site and

workshops. Student like me used to keep in touch even after graduation. In my view there

is a world of knowledge in UPES-EIC but it is up to the student and its learning

capabilities that how well it grasp and preserve it for the future.

Jatin Kumar Khilrani

Hug Innovations LLP

Hyderabad

It’s my sincere pleasure to write these lines for our Electronics instrumentation and

control Department. It’s always been said “a teacher’s purpose is not to create

students in his own image, but to develop students who can create their own image”,

that’s what our faculties do. Being an ECE student, it’s very tough to stand in this

competitive digital world without any practical approach, but our faculties taught the

subject in a much more practical way, so that a person can easily correlate subject’s

practicality with theory. Our faculties made us involved in many national and

international projects and guided us to execute them successfully. I am very thankful

to such a great department who made me think beyond imagination.

Thank you teachers for guiding me, inspiring me and making me what I am today.

Nikhil Gupta

Senior Engineer Design

Strategic Electronics Centre,

L&T Defense, Bangalore.

Currently i am pursuing my Doctoral research studies at University of StrathClyde,

Glasgow, UK and Assistant Professor, Electronics & Robotics Engineering, University

of Delhi,India(2014-2015).

UPES - A life changing experience!! I started my journey at UPES four year back as a

student seeking knowledge in Robotics Engineering and it has been a dream - run since

then. The Course curriculum provides me hands - on - Technical & industrial exposure

and research to all around development of student.It was pleasure being a part of UPES

family and privilege to be guided and support by the acclaimed faculty members, Dept of

Electronics at UPES.

Abdul Wahid Ansari

University of StrathClyde, Glasgow, UK

Student Achievement

Students Competitions: E-YANTRA IIT-B(5), KPIT(5), TEXAS Instruments, CANSAT(1), Roll on Roll off(1),

John Derre Technochamp, Innovate India, Little box challenge- google & IEEE

Conversion of Projects into products: 3 RISE Projects, 3 more projects are being processed for product

development

(1) Octa-copter (2) Segway (3) IoT based digital lock

Students Publication: Scopus Indexed- 20 (IEEE, Springer, Elsevier etc.)

Students Patents: 04

Team “Vyom” comprising of Gopal Thakur, Ankit Pandey, Harsha Bora, Satyendra Tripathi, Ankit Pandey, Niraj

kumar, Nainit Kumar & Abhishek Thakur secured 5th position at University CANSAT challenge 2015-16.

Amitabh Yadav of B.Tech. Electronics Engineering 3rd year is part of a team which won Lockheed Martin C-130J Roll-

On/Roll-Off Design Challenge.

The Laureate Award for Excellence in

Robotic Engineering, 2015

Team with Project titled ‘EKAGRAH’

was selected as one of top 6 teams in the

first round and promoted to final phase II,

which was held in Spain under the

guidance of Dr. Rajesh singh.

Team members: (B.Tech students)-

Siddharth Sharma, Ayush Bansal, Vipul

Sharma, Sahil Wadhwa,

The Laureate Award for Excellence in

Robotic Engineering, 2014

Project titled “Pratham” has been selected

in the competition. Team has selected for

the first round and promoted to final

phaseII, which was held in Spain.

Under the guidance of Dr. Rajesh Singh

and Mentored by Dr. Sushabhan

Choudhury.

Team members: (B.Tech students ): Jatin

Khilrani, Shantmanu, Akash Gupta, Ishan

Upadhay

Placements

Highest Package- 12.80 Lakh

Average-4 Lakh

Internships

• ABB Ltd.

• ACTIA

• Amber Group

• Bharti Airtel

• Carrier Cmedia

• Dixon Industries

• Indo Simon

• Panasonic India

• Creative Electronics

• Halonix India

• Orient Industries

• Moserbaer

• DRDO

• BEL

• BHEL

• HAL

brief profile of hod - upes.ac.in · pdf filenotable visiting faculty 1- topic –geometry...

Documents