bridon oil & gas datasheets
DESCRIPTION
Wire Rope DatasheetTRANSCRIPT
-
Oil and Gas
Offshore Exploration Drilling Rigs Anchor lines
Benefits: Enhanced strength to diameter ratio Premium Quality Abrasion & wear resistant Long service life, reduced down time Improved diameter tolerance Corrosion resistant Superior Crush resistance
High Strength Anchor LinesDyform DB2K offers enhanced strength to diameter ratioenabling optimum utilisation of limited volume wincharrangements.
Increased surface area of Dyformed strands improves stressdistribution enabling superior crush & abrasion resistance.
Premium quality anchor lines from Bridon, a brand proven inthe most demanding global Oil & Gas applications.
DyformDB2K
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
02/2013 Edition 6Oil and Gas
DB2K Anchor lines
848888.99295.396100101.6
3 1/2
3 3/4
4
32.035.135.838.341.141.745.346.8
21.523.624.025.727.628.030.431.4
27.830.531.133.435.836.339.440.7
18.720.520.922.424.024.426.527.3
62516861700273217856797184308702
637699714746801813859887
703771787823883896948978
380418426456490497539557
849294101108110119123
6.837.858.098.769.739.9511.011.5
50335787596764567176733680818475
36584014409743884708477851845351
5.6706.2226.3506.8017.2987.4058.0358.294
Ordinary
Rope Diameter
Minimum BreakingForce (Fmin) Nominal metallic
cross-sectionalarea (A)
Nominal rope lengthmass (M)
In air (M) Submerged
Axial Stiffnessat 20% Load
mm in kg/m lbs/ft kg/m lbs/ft kN Tonnes Tons kN.m lbs/ftMN Mlbs mm2 in2
52545657.26060.363.56466.76869.9727676.28082.6
2.1/8
2.1/4
2 3/82 1/2
2 5/8
2 3/4
3
3 1/4
12.213.214.214.816.316.518.318.620.220.922.123.526.226.329.030.9
8.228.879.5410.010.911.112.312.513.514.114.915.817.617.719.520.8
10.711.512.412.914.214.315.916.117.518.219.320.422.822.925.226.9
7.27.78.38.79.59.610.710.811.812.212.913.715.315.416.918.1
2396258327782899318932213572362939414096432945935117514456706044
244263283295325328364370402418441468522524578616
269290312326358362402408443460487516575578637679
146157169176194196217221240249263279311313345368
32353739434348495355586269697681
1.621.812.022.162.492.532.953.023.423.623.934.305.065.105.906.49
1194133714911589183418622174222625202670290031703728375743484786
1402151216261696186618852090212323062397253326872994301033183537
2.1732.3432.5202.6292.8932.9223.2403.2913.5753.7153.9264.1654.6414.6665.1435.482
1960 grade
Torque Generated at 20% Load
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Exploration Drilling Rigs Anchor lines
Benefits: Combines strength & flexibility Good fatigue resistance Premium Quality Abrasion & wear resistant Long service life, reduced down time Corrosion resistant
High Strength Anchor LinesBridon's high-strength steel anchor line products are robustand offer excellent abrasion and fatigue resistance tooptimise performance on winches and sheaves.
A proprietary blocking and lubrication medium providescorrosion resistance with the additional protection of adrawn galvanised finish.
Premium quality Anchor lines for demanding Oil & Gasapplications, Bridon the benchmark for reliability.
Diamond Blue
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
02/2013 Edition 6Oil and Gas
52545657.26060.363.56466.76869.9727676.28082.6
2.1/8
2.1/4
2 3/82 1/2
2 5/8
2 3/4
3
3 1/4
11.712.613.614.215.615.717.517.719.320.021.222.425.025.127.729.5
7.868.489.129.5110.510.611.711.912.913.414.215.116.816.918.619.8
10.211.011.812.313.613.715.215.416.817.418.419.521.821.924.125.7
6.847.387.938.289.119.2010.210.411.311.712.413.114.614.716.217.3
2231240625872699297030003326337936703815403142774765479052805629
227245264275303306339344374389411436486488538574
251270291303334337374380413429453481536538593633
140151163170187189209213231240254269300302333354
31333637414246475153565966677378
1.511.691.882.012.322.352.752.813.183.373.664.004.714.755.496.04
1112124513891480170817342025207323472487270129523471349940494457
1338144315521619178117991995202722012288241825652858287331673376
2.0742.2362.4052.5092.7612.7893.0933.1413.4123.5463.7473.9764.4304.4534.9085.233
Ordinary Lay
Rope Diameter
Minimum BreakingForce (Fmin) Nominal metallic
cross-sectionalarea (A)
Nominal rope lengthmass (M)
In air (M) Submerged
Axial Stiffnessat 20% Load
mm in kg/m lbs/ft kg/m lbs/ft kN Tonnes Tons kN.m lbs/ftMN Mlbs mm2 in2
1960 grade
Torque Generated at 20% Load
848888.99295.396100101.6108114.3120.7127
3 1/2
3 3/4
44 1/44 1/24 3/45
30.633.534.236.639.339.943.344.750.556.663.169.8
20.522.523.024.626.426.829.130.033.938.042.446.9
26.629.229.831.934.234.737.738.943.949.254.960.8
17.819.620.021.423.023.325.326.129.533.036.840.8
58216389652065597038714277508000830693031037411485
59365166566971772879081584794810571171
654718733737791803871899934104611661291
367402411440472479520536606679757838
81899197104106115118134150167185
6.367.317.547.858.728.9110.110.611.713.816.319.0
468753895556578564306573742977918598101931200313982
349138323911418844944560494851085771646472087981
5.4125.9396.0616.4916.9657.0687.6697.9178.94610.02011.17312.370
Anchor lines
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Pedestal Crane Ropes Main Hoist & Auxiliary Hoist Ropes
Benefits: Low rotation engineered rope High strength Reduced rope sheave wear Accurate diameter for multi-layer coiling
Long service life, reduced down time Crush resistant Ideal for single-part & multi-part reeving
High Performance Crane RopesDyform 34LR multi-strand ropes are recommended for highlifting operations. Exceptional 'low rotational' properties anda high steel fill factor provides high strength, crushresistance, improved fatigue performance and low stretch.
High performance offshore crane ropes from Bridon, a brand proven in the most demanding global Oil & Gasapplications.
Endurance Dyform 34LR
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
252627282930323435363840
4244464850
3.133.383.653.924.214.505.125.786.136.487.228.00
8.829.6810.611.512.5
57662367272277582993910601124118913251468
16181776194121132293
58.763.568.573.679.084.595.7108115121135150
165181198215234
604654705758813870990
61.666.671.977.382.988.7101
363942454852596770758392
101111122133144
232629323640485863688194
109125143162183
525865738190108130142154181211
245281321365413
363393424456489523595672712753839930
10251125123013391453
02/2013 Edition 6Oil and Gas
34LR
Dyform 34x19
101112131415161718192021222324
0.500.610.720.850.981.131.281.451.621.812.002.212.422.652.88
92.1111133156181207236266298333368406446487531
9.3911.413.515.918.421.124.027.130.433.937.641.445.449.754.1
96.7117139163190218248279313349387426468511557
9.911.914.216.719.322.225.228.531.935.639.443.547.752.156.8
5.87.08.39.71113151719212325283033
1.52.02.53.24.05.06.07.28.6101214161820
3.34.45.77.39.111141619232731354046
58708498114131149168188210232256281307335
Ordinary
Rope Diameter
Metalliccross section
Minimum BreakingForce (Fmin)
EIPS / 1960 grade
Axial stiffness@20% load
mm kg/m kN Tonnes kN Tonnes MN N.m N.m mm2
EEIPS / 2160 grade
Torque generated @20% loadApprox.
nominal length mass Langs
Dyform 34x7
Not applicable in these sizes
Main & Auxiliary Hoist Ropes
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Pedestal Crane Ropes Main Hoist & Auxiliary Hoist Ropes
Benefits: Low rotation engineered rope High strength Reduced rope sheave wear Accurate diameter for multi-layer coiling Long service life, reduced down time Crush resistant Ideal for single-part & multi-part reeving Improved fatigue resistance Corrosion protected core
High Performance Crane RopesDyform 34LR PI multi-strand ropes are recommended forhigh lifting operations. Exceptional 'low rotational' propertiesand a high steel fill factor provides high strength, crushresistance and low stretch.
The engineered polymer core further enhances fatigueperformance beyond that of the standard 34LR.
Premium quality offshore crane ropes from Bridon, a brandproven in the most demanding global Oil & Gas applications.
Endurance Dyform 34LR PI
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
252627282930323435363840
4244464850
3.133.383.653.924.214.505.125.786.136.487.228.00
8.829.6810.611.512.5
57662367272277582993910601124118913251468
16181776194121132293
58.763.568.573.679.084.595.7108115121135150
165181198215234
604654705758813870990
61.666.671.977.382.988.7101
363942454852596770758392
101111122133144
232629323640485863688194
109125143162183
525865738190108130142154181211
245281321365413
363393424456489523595672712753839930
10251125123013391453
02/2013 Edition 6Oil and Gas
Dyform 34x19
101112131415161718192021222324
0.500.610.720.850.981.131.281.451.621.812.002.212.422.652.88
92.1111133156181207236266298333368406446487531
9.3911.413.515.918.421.124.027.130.433.937.641.445.449.754.1
96.7117139163190218248279313349387426468511557
9.911.914.216.719.322.225.228.531.935.639.443.547.752.156.8
5.87.08.39.71113151719212325283033
1.52.02.53.24.05.06.07.28.6101214161820
3.34.45.77.39.111141619232731354046
58708498114131149168188210232256281307335
Ordinary
Rope Diameter
Metalliccross section
Minimum BreakingForce (Fmin)
EIPS / 1960 grade
Axial stiffness@20% load
mm kg/m kN Tonnes kN Tonnes MN N.m N.m mm2
EEIPS / 2160 grade
Torque generated @20% loadApprox.
nominal length mass Langs
Dyform 34x7
34LR PI
Not applicable in these sizes
Main & Auxiliary Hoist Ropes
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Pedestal Crane Ropes Boom Hoists Boom Pendants
Benefits: Superior crush resistance Accurate diameter tolerance Long life, reduced lifetime costs Premium quality Corrosion resistant Reduced stretch
High Performance Crane RopesEndurance Dyform 6 ropes are recommended for Boomhoist & Pendant applications.
The Dyform construction is ideal for Boom hoist andPendant applications providing superior crush resistancewith low stretch.
Premium quality offshore crane ropes from Bridon, a brandproven in the most demanding global Oil & Gasapplications.
Dyform 6
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
1617181919.1202222.22425.4262828.63031.8323434.9363838.140
02/2013 Edition 6Oil and Gas
6x36WS
3/4
7/8
1
1.1/8
1.1/4
1.3/8
1.1/2
1.171.331.491.661.671.842.222.262.642.963.103.603.754.134.644.705.305.595.956.636.667.34
0.790.891.001.111.121.231.491.521.771.992.082.422.522.773.123.153.563.753.994.454.474.93
191216242270273299362368431482505586611673756765864910969107910851196
19.522.024.727.527.830.536.937.643.949.251.559.762.368.677.178.088.192.898.7110.0110.6121.9
21.524.327.230.330.633.640.741.448.454.256.865.968.775.685.086.097.1102109121122134
21223926829930233140140847753456064967774583784895710081073119512021324
21.624.427.330.530.833.740.841.648.654.457.066.169.075.985.386.497.5103109122122135
23.826.930.133.633.937.245.045.953.660.062.972.976.183.794.195.3108113121
134.34135.05148.86
230260291324328359435443518580607704735809909920103910941165129813041438
23.426.529.733.133.436.644.345.152.859.161.971.874.982.492.693.8106112119132133147
25.929.232.736.536.840.448.949.858.265.268.379.282.690.9102103117123131146147162
13.915.717.619.619.821.726.226.731.235.036.642.544.348.854.855.562.766.070.278.378.786.7
3.063.453.874.314.364.785.785.896.887.718.089.379.810.812.112.213.814.615.517.317.319.1
135152170190192210255259303339356413430474532539608641682760764842
0.2090.2360.2640.2940.2980.3260.3950.4020.4700.5260.5510.6390.6670.7340.8250.8350.9430.9931.0571.1781.1841.305
899.5101111.11212.7131414.31515.9
2160 grade
Rope Diameter
Nominal metalliccross-sectionalarea (A)
Minimum BreakingForce (Fmin)
1770 grade
mm
1960 grade
Minimum BreakingForce (Fmin)Nominal
rope lengthmass (M)
Axial Stiffnessat 20% Load
6x26WS
3/8
7/16
1/2
9/16
5/8
0.290.370.410.460.560.570.660.740.780.900.941.031.16
0.200.250.280.310.370.380.440.500.520.600.630.690.78
47.860.567.574.790.492.1108121126147153168189
4.886.176.887.629.229.3911.012.312.914.915.617.119.3
5.386.817.588.4010.210.412.113.614.216.517.218.921.2
53.067.074.782.8100102119134140162169186209
5.406.837.618.4410.210.412.113.614.316.517.319.021.3
5.957.548.409.3011.311.513.415.015.718.219.020.923.5
57.572.881.189.9109111129145152176184202227
5.867.428.279.1611.111.313.214.815.518.018.720.623.2
6.468.189.1210.112.212.414.516.317.119.820.722.725.5
3.474.394.895.426.566.687.808.749.1610.611.112.213.7
0.760.971.081.191.451.471.721.932.022.342.442.693.02
344347536465768589103108118133
0.0520.0660.0740.0820.0990.1000.1170.1320.1380.1600.1670.1840.206
in kg/m lbs/ft kN Tonnes Tons kN Tonnes Tons kN Tonnes Tons MN Mlbs mm2 in2
6 Boom Hoists and Boom Pendants
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Pedestal Crane Ropes Boom Hoists Boom Pendants
Benefits: Enhanced bend fatigue High breaking force Consistent performance Superior crush resistance Accurate diameter tolerance Long life, reduced lifetime costs Reduced stretch Corrosion protected core Recommended for multi-layer coiling
High Performance Crane RopesEndurance Dyform 6 PI ropes are recommended for Boomhoist & Pendant applications.
The Dyform construction is ideal for Boom hoist andPendant applications providing superior crush resistancewith low stretch.
The polymer core further enhances fatigue performancebeyond that of the standard Endurance Dyform 6PI.
Premium quality offshore crane ropes from Bridon, a brandproven in the most demanding global Oil & Gas applications.
Dyform Bristar 6
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
1617181919.1202222.22425.4262828.63031.8323434.9363838.140
02/2013 Edition 6Oil and Gas
6x36WS
3/4
7/8
1
1.1/8
1.1/4
1.3/8
1.1/2
1.171.331.491.661.671.842.222.262.642.963.103.603.754.134.644.705.305.595.956.636.667.34
0.790.891.001.111.121.231.491.521.771.992.082.422.522.773.123.153.563.753.994.454.474.93
191216242270273299362368431482505586611673756765864910969107910851196
19.522.024.727.527.830.536.937.643.949.251.559.762.368.677.178.088.192.898.7110.0110.6121.9
21.524.327.230.330.633.640.741.448.454.256.865.968.775.685.086.097.1102109121122134
21223926829930233140140847753456064967774583784895710081073119512021324
21.624.427.330.530.833.740.841.648.654.457.066.169.075.985.386.497.5103109122122135
23.826.930.133.633.937.245.045.953.660.062.972.976.183.794.195.3108113121
134.34135.05148.86
230260291324328359435443518580607704735809909920103910941165129813041438
23.426.529.733.133.436.644.345.152.859.161.971.874.982.492.693.8106112119132133147
25.929.232.736.536.840.448.949.858.265.268.379.282.690.9102103117123131146147162
13.915.717.619.619.821.726.226.731.235.036.642.544.348.854.855.562.766.070.278.378.786.7
3.063.453.874.314.364.785.785.896.887.718.089.379.810.812.112.213.814.615.517.317.319.1
135152170190192210255259303339356413430474532539608641682760764842
0.2090.2360.2640.2940.2980.3260.3950.4020.4700.5260.5510.6390.6670.7340.8250.8350.9430.9931.0571.1781.1841.305
899.5101111.11212.7131414.31515.9
2160 grade
Rope Diameter
Nominal metalliccross-sectionalarea (A)
Minimum BreakingForce (Fmin)
1770 grade
mm
1960 grade
Minimum BreakingForce (Fmin)Nominal
rope lengthmass (M)
Axial Stiffnessat 20% Load
6x26WS
3/8
7/16
1/2
9/16
5/8
0.290.370.410.460.560.570.660.740.780.900.941.031.16
0.200.250.280.310.370.380.440.500.520.600.630.690.78
47.860.567.574.790.492.1108121126147153168189
4.886.176.887.629.229.3911.012.312.914.915.617.119.3
5.386.817.588.4010.210.412.113.614.216.517.218.921.2
53.067.074.782.8100102119134140162169186209
5.406.837.618.4410.210.412.113.614.316.517.319.021.3
5.957.548.409.3011.311.513.415.015.718.219.020.923.5
57.572.881.189.9109111129145152176184202227
5.867.428.279.1611.111.313.214.815.518.018.720.623.2
6.468.189.1210.112.212.414.516.317.119.820.722.725.5
3.474.394.895.426.566.687.808.749.1610.611.112.213.7
0.760.971.081.191.451.471.721.932.022.342.442.693.02
344347536465768589103108118133
0.0520.0660.0740.0820.0990.1000.1170.1320.1380.1600.1670.1840.206
in kg/m lbs/ft kN Tonnes Tons kN Tonnes Tons kN Tonnes Tons MN Mlbs mm2 in2
6 Boom Hoists and Boom Pendants
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Pedestal Crane Ropes Boom Hoists Boom Pendants
Benefits: High breaking force Flexible eight strand construction High temperature lubricant Consistent performance Enhanced bend fatigue Superior crush resistance Accurate diameter tolerance Long life, reduced lifetime costs Reduced stretch Corrosion protected core Recommended for multi-layer coiling
High Performance Crane RopesEndurance Dyform 8 PI ropes are recommended for Boomhoist & Pendant applications.
The Dyform construction is ideal for Boom hoist andPendant applications providing superior crush resistancewith low stretch.
The polymer core further enhances fatigue performancebeyond that of the standard Endurance Dyform 8PI.
Premium quality offshore crane ropes from Bridon, a brandproven in the most demanding global Oil & Gas applications.
Dyform Bristar 8
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
323434.9363838.1404244464850
1 3/8
1 1/2
4.825.445.736.106.796.837.538.309.119.9510.811.8
3.243.653.854.104.564.595.065.586.126.697.287.90
90310201074114312741280141115561708186620322205
92.1104110117130131144159174190207225
101115121128143144159175192210228248
94410661123119513321339147616271786195221252306
96.3109115122136136150166182199217235
106120126134150150166183201219239259
106120126134150150166183201219239259
520624675741871878101611761352154517561985
384460498546642647749867997113912951463
5476176506927717758549421034113012301335
0.8480.9571.011.071.201.201.321.461.601.751.912.07
121415161717192123252830
4054855255766786837909151052120213661544
29835838742550050458367577688610071138
02/2013 Edition 6Oil and Gas
1617181919.1202222.22425.4262828.63031.8
3/4
7/8
1
1 1/8
1 1/4
1.201.361.521.701.721.882.282.322.713.043.183.693.854.234.76
0.810.911.021.141.151.261.531.561.822.042.142.482.592.843.20
226255286318322353427435508569596691721794892
23.026.029.132.532.836.043.544.351.858.060.870.573.580.990.9
25.428.632.135.836.139.648.048.857.163.967.077.781.089.2100
236267299333336369446455531595623723754830933
24.127.230.533.934.33845.546.354.260.763.673.776.984.695.1
26.529.933.637.437.841.450.151.159.766.870.081.284.793.2105
26.529.933.637.437.841.450.151.159.766.870.081.284.793.2105
657893109111127169174219260279349371429511
485868808294125128162192206257274316376
137154173193195214258263308345361419437481540
0.2120.2390.2680.2990.3020.3310.4010.4080.4770.5340.5600.6490.6770.7450.837
Ordinary
Rope Diameter
Minimum BreakingForce (Fmin) Metallic
cross section
Approx.mass
In air EIPS / 1960 grade
Axial Stiffnessat 20% Load
mm in kg/m lbs/ft kN Tonnes Tons kN Tonnes N.m lbs/ftN.m lbs/ft mm2 in2
2160 grade
Torque Generated at 20% Load
3.13.53.94.34.44.85.85.96.97.78.19.4101112
516172858699131135171202217271289333397
37455362637397100126149160200213246293
Tons MN Mlbs
Langs
8 Boom Hoists and Boom Pendants
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Exploration Drilling Rigs Drilling Lines
Benefits: High quality six strand crane rope Excellent resistance to wear Fully lubricated Steel Core Corrosion resistant Good ton-mile performance
Premium Quality Drilling LinesBridon's Steel core drilling line products are robust and offerexcellent abrasion and fatigue resistance to optimiseperformance on winches and sheaves.
A proprietary blocking and lubrication medium providescorrosion resistance with the additional protection of adrawn galvanised finish.
Premium quality drilling lines for demanding Oil & Gasapplications, Bridon the benchmark for reliability.
Steel core Class 6x19 (Metric)incl. 6x19S, 6x19W, 6x21F, 6x26WS, 6x25F
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
3638404448525660
5.185.786.407.749.2210.812.514.4
7.728.609.5311.513.716.118.721.4
817910100812201452170419762268
83.292.8103124148174201231
91.8102113137163192222255
9041008111613511608188721882512
92.2103114138164192223256
102113125152181212246282
9971110123014891772207924112768
60.567.474.790.4108126146168
13.3414.8716.4719.9323.7227.8432.2937.06
5826487188691034121414081616
0.9021.0051.1141.3471.6031.8822.1832.505
102113125152181212246282
112125138167199234271311
02/2013 Edition 6Oil and Gas
Steel core Class 6x19 (Metric)
1011121314161819202224262832
0.400.480.580.680.781.021.301.441.601.942.302.703.144.10
0.600.720.861.011.171.531.932.152.382.883.434.034.676.10
63.076.290.7106124161204227252305363426494645
6.427.779.2510.912.616.420.823.225.731.137.043.450.465.8
7.088.5710.212.013.918.122.925.628.334.340.847.955.572.5
69.884.4100118137179226252279338402472547715
7.118.6110.212.013.918.223.025.728.534.441.048.155.872.8
7.849.4911.313.315.420.125.428.331.438.045.253.061.580.3
76.993.0111130151197249278308372443520603787
4.675.656.727.899.1512.015.116.918.722.626.931.636.647.8
1.031.251.481.742.022.643.343.724.124.985.936.968.0710.54
4554657688115145162180217259304352460
0.0700.0840.1000.1180.1360.1780.2250.2510.2780.3370.4010.4700.5460.713
2160 grade
Rope Dia
Minimum Breaking Force (Fmin) Nominal metalliccross-sectionalarea (A)
Nominal rope lengthmass (M) 1770 grade
mm kg/m lbs/ft kN Tonnes Tons kN Tonnes MN MlbsTonnes Tons mm2 in2
1960 grade
Axial Stiffnessat 20% Load
7.849.4811.313.215.420.125.428.331.437.945.153.061.580.3
8.6410.512.414.616.922.128.031.234.641.849.858.467.888.5
Tons kN
Drilling Lines
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Exploration Drilling Rigs Marine Riser Tensioner Lines
Benefits: High quality six strand flexible Good bend fatigue performance Fully lubricated Corrosion resistant Consistent performance Premium quality
High Performance MRT LinesThe constant cycling of marine riser tensioner lines oversheaves demands that ropes that are flexible and highly-resistant to bend fatigue.
Bridon's Steel core marine riser tensioner lines are robustand offer excellent abrasion and fatigue resistance.
A proprietary blocking and lubrication medium providescorrosion resistance with the additional protection of adrawn galvanised finish.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
Steel core Class 6x36 (Metric)incl. 6x31WS, 6x36WS, 6x41WS, 6x46WS, 6x49WS
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
3638404448525660
5.305.916.547.929.4211.112.814.7
7.898.809.7511.814.016.519.121.9
817910100812201452170419762268
83.292.8103124148174201231
91.8102113137163192222255
9041008111613511608188721882512
92.2103114138164192223256
102113125152181212246282
9971110123014891772207924112768
62.069.176.592.6110129150172
13.6715.2316.8820.4224.3028.5233.0837.97
5966647368911060124414431656
0.9241.0301.1411.3801.6431.9282.2362.567
102113125152181212246282
112125138167199234271311
02/2013 Edition 6Oil and Gas
Steel core Class 6x36 (Metric)
1011121314161819202224262832
0.410.490.590.690.801.051.331.481.641.982.362.763.214.19
0.610.740.881.031.191.561.972.202.442.953.514.124.786.24
63.076.290.7106124161204227252305363426494645
6.427.779.2510.912.616.420.823.225.731.137.043.450.465.8
7.088.5710.212.013.918.122.925.628.334.340.847.955.572.5
69.884.4100118137179226252279338402472547715
7.118.6110.212.013.918.223.025.728.534.441.048.155.872.8
7.849.4911.313.315.420.125.428.331.438.045.253.061.580.3
76.993.0111130151197249278308372443520603787
4.785.796.898.089.3812.215.517.319.123.227.632.337.549.0
1.051.281.521.782.072.703.423.814.225.106.087.138.2710.80
4656667890118149166184223265311361471
0.0710.0860.1030.1200.1400.1830.2310.2570.2850.3450.4110.4820.5590.730
2160 grade
Rope Dia
Minimum Breaking Force (Fmin) Nominal metalliccross-sectionalarea (A)
Nominal rope lengthmass (M) 1770 grade
mm kg/m lbs/ft kN Tonnes Tons kN Tonnes MN MlbsTonnes Tons mm2 in2
1960 grade
Axial Stiffnessat 20% Load
7.849.4811.313.215.420.125.428.331.437.945.153.061.580.3
8.6410.512.414.616.922.128.031.234.641.849.858.467.888.5
Tons kN
Marine Riser Tensioner Lines
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Exploration Drilling Rigs Drilling Lines
Benefits: High quality six strand crane rope Excellent resistance to wear Fully lubricated Steel Core Corrosion resistant Good ton-mile performance
Premium Quality Drilling LinesBridon's Steel core drilling line products are robust and offerexcellent abrasion and fatigue resistance to optimiseperformance on winches and sheaves.
A proprietary blocking and lubrication medium providescorrosion resistance with the additional benefit of a drawngalvanised finish.
Premium quality drilling lines for demanding Oil & Gasapplications, Bridon the benchmark for reliability.
Steel core Class 6x19 & 6x36 (Imperial)incl. 6x19S, 6x19W, 6x21F, 6x26WS, 6x25F, 6x31WS, 6x36WS, 6x41WS, 6x46WS, 6x49WS
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
1.1/21.5/81.3/41.7/82
2.1/82.1/4
6.207.278.439.6711.0112.4213.93
4.164.885.666.497.398.349.35
880102011801350153017101910
89.7104120138156174195
98.9115133152172192215
1015117513621549176219672198
103120139158180200224
114132153174198221247
125146169192217243272
67.879.692.5106121136153
6527668891017115913091469
1.0101.1871.3781.5771.7962.0292.277
1113129915041709193121632421
113132153174197220247
14.917.620.423.326.630.033.7
02/2013 Edition 6Oil and Gas
Steel core Class 6x19 & 6x36 to API 9A (Imperial)
3/87/161/29/165/83/47/81
1.1/81.1/41.3/8
0.390.520.690.861.071.552.102.763.494.305.20
0.260.350.460.580.721.041.411.852.342.893.49
58.479.1102129157228308399503617743
5.958.0610.413.116.023.231.440.751.362.975.7
6.568.8911.514.517.625.634.644.856.569.483.5
67.290.7118150183262354460579711854
6.859.2512.115.218.726.736.146.959.072.587.1
7.5510.213.316.820.629.439.851.765.079.996.0
n/a11.214.618.522.732.443.856.971.587.9106
4.215.757.539.5511.817.023.030.138.247.256.9
41557292114164221290367454547
0.0630.0860.1120.1420.1760.2540.3430.4490.5690.7040.848
EEIPS grade
Rope Diameter
Minimum Breaking Force (Fmin) Nominal metalliccross-sectionalarea (A)
Nominal rope lengthmass (M) IPS grade
in mm kg/m lbs/ft kN Tonnes Tons kN Tons MNkN Tonnes Mlbs in2
EIPS grade
Axial Stiffnessat 20% Load
n/a99.6130165202288390506636782943
n/a10.213.216.820.629.439.751.664.979.796.2
Tonnes Tons
0.931.271.662.112.603.765.076.648.4210.412.5
mm2
Drilling Lines
9.511.112.714.315.919.122.225.428.631.834.9
38.141.344.547.650.85457.2
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Exploration Drilling Rigs Drilling Lines
Benefits: Superior abrasion & wear resistance Crush resistant Corrosion protected IWRC Even load distribution Reduced internal friction Increased bend fatigue Improved torsional stability Enhanced strength to diameter ratio Improved diameter tolerance Up to 60% more service life**Bristar Ton Mile Performance vs. API standard Drill Line
High Performance Drilling LinesBridon's conventional six-strand drilling lines deliverexcellent ton-mile performance. The pinnacle of drilling lineperformance is provided by our unique Bristar core drilling lines.
Dyform rope construction reduces sheave wear and pointloading which combined with the superior dynamicstructural stability provided by the Bristar core deliversexceptional performance and sets the standard for drillingapplications.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
DyformBristar 6x19 Class
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
57.263.569.976.2
2 1/42 1/22 3/43
14.417.721.525.5
9.6711.914.417.2
2606321237624471
266327383456
293361423502
175215261310
39485970
2057281436294701
1517207526763467
n/an/an/an/a
n/an/an/an/a
1696209025333010
2.633.243.934.67
02/2013 Edition 6Oil and Gas
6x19 Class to API 9A Drilling Lines
Ordinary
Rope Diameter
Minimum BreakingForce (Fmin) Metallic
cross section
Approximate Mass
In air (M) EIPS/1960 grade
in mm kg/m lbs/ft kN Tonnes Tons MN Mlbs N.m lbs.ftN.m lbs.ft mm2 in2
25.428.631.834.938.141.344.547.650.854.0
11 1/81 1/41 3/81 1/21 5/81 3/41 7/82
2 1/8
2.843.604.455.366.397.518.719.9711.412.8
1.912.422.993.604.295.045.856.707.638.62
514652805970115613591577180520552323
52.466.482.198.9118138161184210237
57.773.290.5109130153177203231261
344454657891106121138156
8101215172024273135
180257353467608774969118514411731
13319026134544857171487410631276
n/an/an/an/an/an/an/an/an/an/a
n/an/an/an/an/an/an/an/an/an/a
3344245246317528841026117413381512
0.5180.6570.8120.9791.171.371.591.822.072.34
Axial stiffness@20% load
Torque Generated at 20% Load
Langs
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Exploration Drilling Rigs Marine Riser Tensioner Lines
Benefits: Superior abrasion & wear resistance Crush resistant Corrosion protected IWRC Even load distribution Reduced internal friction Accurate diameter tolerance Increased bend fatigue Improved torsional stability Enhanced strength to diameter ratio
Market Leading MRT LinesThe constant cycling of marine riser tensioner ropesover sheaves demands that ropes used for thisapplication are flexible and highly-resistant to bend fatigue.
Dyform rope construction reduces sheave wear andpoint loading which combined with the superiordynamic structural stability provided by the Bristar
core delivers exceptional performance and sets thestandard for marine riser tensioner applications.
High performance rope technology for critical Oil &Gas applications, Bridon the benchmark for reliability.
DyformBristar 6x37 Class
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
02/2013 Edition 6Oil and Gas
6466.769.973.076.2
2 5/82 3/42 7/83
18.219.821.723.725.8
12.213.314.615.917.4
29723229354638674214
303329361394430
334363398434473
219238261285310
4953596470
4.14.75.46.27.0
30583462398445385161
21232306253327623010
3.293.573.934.284.67
Rope Diameter
Minimum BreakingForce (Fmin) Metallic
cross section
Approximate Mass
In air EIPS/1770 grade
in mm kg/m lbs/ft kN Tonnes Tons MN kN.m lbs.ftMlbs mm2 in2
4444.547.64850.852545657.260.363.5
1 3/41 7/8
2
2 1/8
2 1/42 3/82 1/2
8.628.7910.110.311.512.013.014.014.516.217.9
5.795.916.786.897.728.098.729.389.7710.912.1
14561486170417331941203421942359237026392926
148152174177198207224240242269298
164167191195218228246265266296329
103105121123138144156167174194215
2324272831323538394448
1.41.41.81.82.12.32.62.93.03.54.1
10301062130413371585170019042124217725582987
10041024117411941338140215121626169318852090
Axial stiffness@20% load
Torque Generated at 20% Load
Langs Lay
1.561.591.821.852.072.172.342.522.622.923.24
6x37 Class Marine Riser Tensioner Lines
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Production & Transportation CALM Buoy/Off take Mooring Systems
Benefits: OCIMF 1987 Compliant Balanced construction Mass: 50% sheath, 50% core Flexible and easy to handle
Mooring System SpecialistsViking Braidline Polyester is a balanced, flexible constructionwhich distributes the weight and strength equally between thesheath and the braided core. Viking Braidline offers a higherelongation than competing constructions and is suitable formany shock load applications.
Viking Braidline Polyester
A
S S U R E
D
Q
UALITYMaterial: High Tenacity Polyestermultifilament fibre
Construction: BraidlineColour: Natural (white) Markers: BlueRelative Density: 1.38Melting Point: 256CTorque Properties: Torque BalancedShrinkage (Cold Water): 0%Water uptake: LowUV resistance: ExcellentAbrasion Resistance: Very Good
Worked Braidline New Braidline
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
808896104112120128136144152160168176184192216240
3 1/83 1/23 3/44 1/84 3/84 3/45
5 3/85 5/86
6 1/46 5/87
7 1/47 1/28 1/29 1/2
251276302327352377402427452478503528553578603679754
1011121314151617181920212223242730
4.875.917.028.259.5611.0012.5014.1015.8017.6019.5021.5023.6025.8028.1035.6043.90
7.258.7910.4512.2814.2316.3718.6020.9823.5126.1929.0231.9935.1238.3941.8252.9865.33
1.241.501.782.092.422.793.173.584.014.464.955.455.986.547.139.0311.13
1.842.232.653.113.614.154.725.325.966.647.368.118.919.7410.6013.4316.57
130415491785205023542697293233053717412945805031552160316570831610268
1331581822092402752993373794214675135636156708481047
1471742012302643033293714184645155656206787389341154
02/2013 Edition 6Oil and Gas
Polyester
161821242832364044485256606472
5/83/47/81
1 1/81 5/161 1/21 5/81 3/42
2 1/82 1/42 1/22 5/83
5057667588101113126138151163176188201226
22 1/42 5/83
3 1/24
4 1/25
5 1/26
6 1/27
7 1/289
0.190.230.390.500.680.891.121.221.471.762.052.382.743.123.95
0.280.330.580.741.011.321.671.822.192.623.053.544.084.645.88
0.050.060.100.130.170.220.280.310.370.450.520.600.690.791.00
0.070.080.150.190.260.330.420.460.550.660.770.901.031.181.49
61.977.51061481632442863463974895516287568281059
6.317.9010.815.116.624.929.235.340.549.956.264.077.184.4108
Rope Diameter Minimum breaking force (F min)Rope CircumferenceNominal Mass
mm in in kg/m lb/ft kg/m lb/ft kN Tonnes Tons
In Air
mm
6.958.7111.916.618.327.432.238.944.655.061.970.585.093.0119
Submerged
TM
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Offshore Exploration Drilling Rigs Fibre MODU Tethers
Benefits: Enhanced strength to diameter ratio Balanced construction Protective braided jacket Light weight Long service life Low maintenance Easy handling
Fibre MODU TethersBridon Superline Steelite/Steelite Xtra provides a lightweightsynthetic tether for MODU's.
A thicker construction of the braided jacket providesenhanced protection and improves handling performance.
High performance synthetic tethers for critical Oil & Gasapplications, Bridon the benchmark for reliability.
Bridon Superline Steelite/Steelite Xtra
A
S S U R E
D
Q
UALITY
Material: Dyneema, high moduluspolyethylene SK62 or SK75
Construction: SuperlineColour: Superline - WhiteMarkers: Blue and lime - Steelite
Blue and pink - Steelite XtraRelative Density: 0.97 to 1.15 depending on
diameter and jacket material(Check with sales office forspecific details)
Melting Point: 150CTorque Properties: Torque BalancedShrinkage (Cold Water): 0%Water Uptake: LowUV Resistance: Very GoodAbrasion Resistance: Excellent
Worked Superline New Superline
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
7276808896104112120
33 1/163 1/83 1/23 3/44 1/84 3/84 3/4
226239251276302327352377
99 1/2101112131415
2.853.163.344.244.926.017.019.18
1.922.122.242.853.314.044.716.17
29633335365944445229614171918231
302340373453533626733839
333375411499587690808925
37184189447352786131728981529349
4184715035936898199161050
379427456538625743831953
02/2013 Edition 6Oil and Gas
Bridon Superline Steelite/Steelite Xtra
28 303234364044485256606468
1 1/81 7/321 5/161 13/321 1/21 5/81 3/42
2 1/82 1/42 1/22 5/82 13/16
88 94101107113126138151163176188201214
3 1/23 3/44
4 1/44 1/25
5 1/26
6 1/27
7 1/28
8 1/2
0.460.480.670.730.770.871.041.381.731.902.082.452.66
0.310.320.450.490.520.590.700.931.161.281.401.651.79
4665035936747228831050123614421658189323842639
47.551.360.468.773.690.0107126147169193243269
52.356.566.675.781.199.2118139162186213268296
60865768781491211091315160919032237257030123365
Nominal Diameter Rope CircumferenceNominal Mass
mm in in kg/m lb/ft kN Tonnes kN Tonnes Tons
In Air
mm
68.373.877.191.5102125148181214251289338378
Minimum breaking force (F min)
62.067.070.083.093.0113134164194228262307343
Tons
Steelite Steelite Xtra
Minimum breaking force (F min)
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Production & Transportation CALM Buoy/Off take Mooring Systems
Benefits: OCIMF 1987 Compliant Balanced construction Mass: 50% sheath, 50% core Flexible and easy to handle
Mooring System SpecialistsViking Braidline Nylon Super Hawser is a balanced, flexibleconstruction which distributes the weight and strengthequally between the sheath and the braided core.
Viking Braidline offers a higher elongation than competing constructions and is suitable for many shockload applications.
High performance ropes for critical Oil & Gas applications,Bridon the benchmark for reliability.
Viking Braidline Nylon Super Hawser
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
192200208216224232240
7 1/27 7/88 1/48 1/28 7/89 1/89 1/2
603628654679704729754
24252627282930
22.824.726.728.831.033.335.6
86994310181098118112601348
15.316.617.919.420.822.423.9
2.202.382.582.782.993.213.44
1.481.601.731.872.012.162.31
81508845955010300110801187012700
81508845955010300110801187012700
91699410731157124513341427
7730839090609770105101121512000
788856924996107211441224
02/2013 Edition 6Oil and Gas
Rope Diameter
Nominal MassRope
CircumferenceNew Dry
mm in mm in kg/m lbs/ft Tonskg/m lb/ft Tons kNkN Tonnes Tonnes
808896104112120128136144152160168176184
3 1/83 1/23 3/44 1/84 3/84 3/45
5 3/85 5/86
6 1/46 5/86 7/87 1/4
251277302327352377402427452478503528553578
1011121314151617181920212223
4.04.85.76.77.88.910.211.412.814.315.817.419.120.9
154187218260301343384438491545603664729798
2.73.23.84.55.26.06.97.78.69.610.611.712.814.0
0.390.460.550.650.750.860.981.101.241.381.521.681.842.02
0.260.310.370.430.510.580.660.740.830.931.021.131.241.36
14401750204024402820321036104110461051105660623068407475
14401750204024402820321036104110461051105660623068407475
162197229274317361406462518574636700769840
13701660194023102680305034203900437048505370591064907100
140169198236273311349398446495548603662724
In Air
Minimum breaking force (F min)
Submerged New Wet
Nylon Super HawserTM
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Production & Transportation Off-take Mooring Systems
Benefits: OCIMF 2000 Compliant Balanced construction Protective braided jacket High strength efficiency
Mooring System SpecialistsBridon Superline is a torque balanced circular braidedconstruction consisting of an outer protective braided jacketover a central group of parallel low twist cores.
In the as new condition Bridon Superline offers a slightlystiffer solution than the Viking Braidline Construction.
High performance synthetic mooring systems for critical Oil& Gas applications, Bridon the benchmark for reliability.
Bridon Superline Nylon OCIMF 2000
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
02/2013 Edition 6Oil and Gas
Bridon Superline Nylon OCIMF 2000
192200208216224232
7 4/87 7/88 2/88 4/88 7/89 1/8
603628654679704729
24 25 26 27 28 29
24.126.128.630.532.535.4
8839581037111912051293
16.217.519.220.521.823.8
2.332.522.762.943.143.42
1.561.691.851.982.102.30
8554929010055108501167412537
8729471025110611901278
96110441130121913121409
78588525923199571072211507
801869941101510931173
Rope Diameter
Nominal MassRope
CircumferenceNew Dry
mm in mm in kg/m lbs/ft Tonskg/m lb/ft Tons kNkN Tonnes Tonnes
808896104112120128136144152160168176184
3 1/83 4/83 6/84 1/84 3/84 3/45
5 3/85 5/86
6 2/86 5/86 7/87 2/8
251277302327352377402427452478503528553578
10 11 12 13 14 15 16 17 18 19 20 21 22 23
4.25.26.17.08.39.510.411.713.214.616.217.819.822.2
151183218256298342389440494551611674741810
2.83.54.14.75.66.47.07.98.99.810.912.013.314.9
0.410.500.590.680.800.921.001.131.271.411.561.721.912.14
0.270.340.400.450.540.620.680.760.860.951.051.161.281.44
14621776210924822884331637774267478753375925653371817848
149181215253294338385435488544604666732800
164200237279324373424479538600666734807882
13441628194222762649304134633914439549055435599465927210
137166198232270310353399448500554611672735
In Air
Minimum breaking force (F min)
Submerged New Wet
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
02/2013 Edition 6Oil and Gas
Offshore Exploration Drilling Rigs Fibre MODU Tethers
Benefits: High strength efficiency Balanced construction Protective braided jacket Long service life Low maintenance Easy handling
Fibre MODU TethersBridon Superline Polyester (MODU)provides a lightweightsynthetic tether for MODU's.
A thicker construction of the braided jacket providesenhanced protection and improves handling performance.
High performance synthetic tethers for critical Oil & Gasapplications, Bridon the benchmark for reliability.
Bridon Superline Polyester (MODU)
Bridon Superline Polyester (MODU)
NominalDiameter
Approximate MassMBL Post installation
Drift Stiffness
in mm kN kips kg/m lbs/ft 103 kipskg/m lb/ft MN 103 kipsMN 103 kips MN
5 5/165 13/166 1/4 6 5/87
7 5/167 15/16
135147158169178186194
3924490561806965784888299810
882110213891565176419842205
11.413.615.818.120.222.124.1
24.730.938.943.849.455.661.7
7.79.110.612.213.614.916.2
2.93.44.04.55.15.56.0
1.92.32.73.13.43.74.1
51.063.880.390.5102.0114.8127.5
11.514.318.120.322.925.828.7
105.9132.4166.9188.1211.9238.4264.9
23.829.837.542.347.653.659.5
109.9137.3173.0195.0219.7247.2274.7
In Air
Intermediate Stiffness
Submerged
Storm Stiffness
A
S S U R E
D
Q
UALITY
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Oil and Gas
Production & Transportation Floating Production Mooring System
Benefits: High strength efficiency Balanced construction Protective braided jacket Light weight Long service life Low maintenance Improved handling
Synthetic Permanent MooringsBridon Superline is a torsionally balanced construction andthe polyester material grades offer the highest strength toweight ratio for the permanent mooring solution.
The inclusion of a particle filter layer to limit the ingress ofabrasive particles and a marine finish on load bearingelements to enhance resistance to yarn on yarn abrasionensures long term performance for field lives in excess of 20 years.
High performance synthetic mooring systems for critical Oil& Gas applications, Bridon the benchmark for reliability.
Bridon Superline Polyester(Permanent Mooring)
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
-
9 1/29 3/410 1/810 3/810 9/1610 13/1611 1/1611 1/411 7/1611 5/8
241247257263268274281286291296
15696166771785818639196202060121582225632354424525
3527374839684189440946304850507152915512
37.239.242.444.446.448.550.752.654.756.7
98.8104.9111.1117.3123.5129.6135.8142.0148.1154.3
25.026.328.529.831.232.634.135.336.838.1
9.39.810.611.111.612.112.713.213.714.2
6.36.67.17.57.88.28.58.89.29.5
204.0216.8232.2242.3255.1267.8280.6293.3306.1318.8
45.948.751.654.557.360.263.165.968.871.7
423.8450.3482.2503.3529.7556.2582.7609.2635.7662.2
95.2101.2107.1113.1119.0125.0131.0136.9142.9148.8
439.5467.0500.0521.9549.4576.8604.3631.8659.2686.7
02/2013 Edition 6Oil and Gas
Bridon Superline Polyester (Permanent Mooring)
NominalDiameter
Approximate MassMBL Post installation Drift Stiffness
in mm kN kips kg/m lbs/ft 103 kipskg/m lb/ft MN 103 kipsMN 103 kips MN
4 15/165 1/25 15/166 1/46 5/86 15/167 1/47 15/168 3/88 3/49
126139151158168177185201213223229
392449056180695978488829981010987122631373414715
8821102138915651764198422052469275630863307
10.012.114.415.918.019.921.925.828.931.833.6
24.730.938.943.849.455.661.769.177.286.492.6
6.78.19.710.712.113.414.717.319.421.422.6
2.53.03.64.04.55.05.56.57.28.08.4
1.72.02.42.73.03.43.74.34.95.45.7
51.063.880.390.5102.0114.8127.5142.8159.4178.5191.3
11.514.318.120.322.925.828.732.135.840.143.0
105.9132.4166.9187.9211.9238.4264.9296.6331.1370.8397.3
23.829.837.542.347.653.659.566.774.483.389.3
109.9137.3173.0194.9219.7247.2274.7307.6343.4384.6412.0
In Air
Intermediate Stiffness
Submerged
Storm Stiffness
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
02/2013 Edition 6Oil and Gas
DyformBristar 6x19 Class Drilling Lines
LangsOrdinary
Rope Diameter
Axial Stiffnessat 20% Load
Metalliccross section
Approximate Mass Minimum BreakingForce (Fmin)
In air EIPS / 1960 grade
Torque Generated at 20% Load
in mm kg/m lbs/ft kN Tonnes Tons MN Mlbs N.m lbs/ftN.m lbs/ft mm2 in2
25.428.631.834.938.141.344.547.650.85457.263.569.976.2
11 1/81 1/41 3/81 1/21 5/81 3/41 7/82
2 1/82 1/42 1/22 3/43
2.843.604.455.366.397.518.719.9711.412.814.417.721.525.5
1.912.422.993.604.295.045.856.707.638.629.6711.914.417.2
5146528059701160136015801810206023202610321037604470
52.466.482.198.9118138161184210237266327383456
57.773.290.5109130153177203231261293361423502
34.044.054.065.078.091.0106121138156175215261310
8.0010.012.015.017.020.024.027.031.035.039.048.059.070.0
1802573534676087749691190144017302060281036304700
133190261345448571714874106012771520208026803470
n/an/an/an/an/an/an/an/an/an/an/an/an/an/a
n/an/an/an/an/an/an/an/an/an/an/an/an/an/a
33442452463175288410301170134015101700209025303010
0.520.660.810.981.171.371.591.822.072.342.633.243.934.67
Exploration Drilling Rigs Drilling Lines
Benefits: Superior abrasion & wear resistance Crush resistant Corrosion protected IWRC Increased bend fatigue Improved torsional stability Enhanced strength to diameter ratio Improved diameter tolerance Up to 60% more service life**Bristar Ton Mile Performance vs. API standard Drill Line
High Performance Drilling LinesThe pinnacle of drilling line performance is provided by ourunique Bristar core drilling lines.
Dyform rope construction reduces sheave wear and pointloading which combined with the superior dynamicstructural stability provided by the Bristar core deliversexceptional performance and sets the standard for drillingapplications.
DyformBristar
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that allliability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law.Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change withoutnotice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded.Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to changewithout notice, and should not be relied on without further advice from Bridon.
-
6x19 Class Drilling Lines
Ordinary Langs
Rope Diameter
Nominal rope lengthmass (M)
Axial Stiffnessat 20% Load
Nominalmetallic
cross-sectionalarea (A)
Minimum Breaking Force (Fmin)
EIPS grade EEIPS grade
Torque Generated at 20% Load
in mm kg/m lbs/ft kN Tonnes Tons kN Tonnes Tons MN Mlbs N.m lbs.ft N.m lbs.ft mm2 in2
25.428.631.834.938.141.344.547.650.8
11.1/81.1/41.3/81.1/21.5/81.3/41.7/82
2.763.494.305.206.207.278.439.6711.0
1.852.342.893.494.164.885.666.497.39
46057971185410201180136015501760
46.959.072.587.1103120139158180
51.765.079.996.0114132153174198
50663678294311101300150017101930
51.664.979.796.2113132153174197
56.971.587.9106125146169192217
30.138.247.256.967.879.692.5106121
6.608.4010.412.514.917.620.423.326.6
16423231741754167984810301250
121171233308399501626761924
210298407537696873109013301610
1552203003965136448049781190
29036745454765276688910201160
0.450.570.700.851.011.191.381.581.80
02/2013 Edition 6Oil and Gas
Exploration Drilling Rigs Drilling Lines
6x19 Class
A
S S U R E
D
Q
UALITY
Benefits: High quality six strand crane rope Excellent resistance to wear Fully lubricated Corrosion resistant Good ton-mile performance
Premium Quality Drilling LinesBridon's Steel core drilling line products are robust and offerexcellent abrasion and fatigue resistance to optimiseperformance on winches and sheaves.
A proprietary blocking and lubrication medium providescorrosion resistance with the additional protection of adrawn galvanised finish.
High performance rope technology for critical Oil &Gas applications, Bridon the benchmark for reliability.
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basisthat all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication isgoverned by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within thispublication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content,materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Sand Lines
Minimum Breaking ForceDiameter Approx mass WSC
mm lb/ft kg/ft Tons kN
3/87/161/29/165/83/4
in
9.511.112.714.315.919.1
0.210.290.380.480.590.84
0.090.130.170.210.260.37
5.907.9010.313.015.922.7
52.270.691.7116142202
02/2013 Edition 6Oil and Gas
Oil & Gas Well Servicing Sand Lines
Benefits: Wear resistant - large outer wires Excellent spooling Resistance to kinking Easy to splice
Sand Lines
Premium Quality RopesRigorous checks during manufacture ensures Bridon onlyproduces premium quality rope.
Breaking load tests on all our ropes gives ultimateassurance that specifications have been met or exceeded.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basisthat all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication isgoverned by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within thispublication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content,materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Swaged Tubing Lines
Diameter Approx mass WSC Minimum Breaking Force
mmin lb/ft kg/ft Tons kN
7/81
1 1/81 1/4
22.225.428.631.8
1.702.222.802.89
0.771.011.271.28
48.662.879.598.0
432559707872
02/2013 Edition 6Oil and Gas
Oil & Gas Well Servicing Tubing Lines
Benefits: Crush resistant Excellent abrasion resistance Wear resistant Exceptional spooling
Swaged Tubing Lines
Premium Quality RopesRigorous checks during manufacture ensures Bridon onlyproduces premium quality rope.
Breaking load tests on all our ropes gives ultimateassurance that specifications have been met or exceeded.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basisthat all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication isgoverned by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within thispublication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content,materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Tubing Lines
EIP
Minimum Breaking ForceDiameter Approx mass WSC
mm lb/ft kg/ft Tons kN
3/47/81
1 1/81 1/4
in
19.122.225.428.631.8
1.041.411.852.342.89
0.460.620.821.031.28
29.439.851.765.079.9
262354460579711
02/2013 Edition 6Oil and Gas
Oil & Gas Well Servicing Tubing Lines
Benefits: Abrasion resistant Excellent spooling Wear resistant
Tubing Lines
Premium Quality RopesRigorous checks during manufacture ensures Bridon onlyproduces premium quality rope.
Breaking load tests on all our ropes gives ultimateassurance that specifications have been met or exceeded.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basisthat all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication isgoverned by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within thispublication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content,materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
EIP
Minimum Breaking ForceDiameter Approx mass WSC
mm lb/ft kg/ft Tons kN
5/83/47/81
1 1/81 1/41 3/81 1/21 5/8
in
15.919.122.225.428.631.834.938.141.3
0.901.101.502.002.603.203.804.605.30
0.390.500.680.911.181.451.722.092.41
25.536.548.662.879.598.0119139163
227325432559707872105912371454
02/2013 Edition 6Oil and Gas
Constructex Drilling Lines
Exploration Drilling Rigs Drilling Lines
Benefits: Increased strength to diameter ratio Superior abrasion & wear resistance Exceptional spooling Improved diameter tolerance Robust and crush resistant Enhanced service life*
*Constructex Drilling Line vs. API Std Drilling line
Constructex
High Performance Drilling LinesRigorous checks during manufacture ensures Bridon onlyproduces premium quality rope.
Breaking load tests on all our ropes gives ultimateassurance that specifications have been met or exceeded.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
A
S S U R E
D
Q
UALITY
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basisthat all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication isgoverned by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within thispublication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content,materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.
-
Constructex Tubing Lines
02/2013 Edition 6Oil and Gas
Oil & Gas Well Servicing Tubing Lines
Benefits: Enhanced strength to diameter ratio Superior abrasion & wear resistance Exceptional spooling Improved diameter tolerance Robust and crush resistant Increased service life*
*Constructex Tubing Line vs. Std Tubing line
Constructex
High Performance Tubing LinesRigorous checks during manufacture ensures Bridon onlyproduces premium quality rope.
Breaking load tests on all our ropes gives ultimateassurance that specifications have been met or exceeded.
High performance rope technology for critical Oil & Gasapplications, Bridon the benchmark for reliability.
EIP
Minimum Breaking ForceDiameter Approx mass WSC
lb/ft kg/ft Tons kN
0.901.101.502.002.603.203.804.605.30
0.390.500.680.911.181.451.722.092.41
25.536.548.662.879.598.0119139163
227325432559707872105912371454
A
S S U R E
D
Q
UALITY
mm
5/83/47/81
1 1/81 1/41 3/81 1/21 5/8
in
15.919.122.225.428.631.834.938.141.3
DISCLAIMER Copyright Bridon 2013This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basisthat all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication isgoverned by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within thispublication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content,materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.
Note: Tonnes = 1000kg Tons = 2000lbsFigures shown are for guidance purposes only. For specific applications requirements please contact Bridon.
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subjectto change without notice, and should not be relied on without further advice from Bridon.