birchwood lighting specification guide

Specification Guide

Specification Guide - Index

HAILEY .................................................................................... 2HAILEY LED ............................................................................. 6HAILEY 225-RSM LED ............................................................. 10HAILEY 225-RSM .................................................................... 12KELSEY .................................................................................... 14KELSLEY LED ........................................................................... 18NOLAN ................................................................................... 22NOLAN LED ........................................................................... 24COLLIN ................................................................................... 26COLLIN LED ........................................................................... 28CHLOE ................................................................................... 32CHLOE LED ............................................................................ 36TORi ........................................................................................ 40CHARLOTTE Direct Distribution ............................................ 44CHARLOTTE Direct/Indirect Distribution ............................. 46KATRINA ................................................................................. 48STELLA LED ............................................................................. 50STELLA FL ................................................................................ 52ERIKA LED............................................................................... 54ERIKA LED Direct/Indirect Distribution ................................ 58

JAKE Trim/Trimless ................................................................. 60JAKE T-Grid ............................................................................ 62JAKE LED Trim/Trimless .......................................................... 66JAKE LED T-Grid ..................................................................... 68JAKE LED Wall Wash Trim/Trimless........................................ 72JAKE LED Wall Wash T-Grid .................................................. 76JAKE LED Wall Graze Trim/Trimless ...................................... 80JAKE LED Wall Graze T-Grid ................................................. 82JAKE LED Regressed Lens T-Grid ......................................... 86JAKE LED Regressed Lens Trim/Trimless .............................. 90JAKE LED Perimeter Trim/Trimless ........................................ 92JAKE LED Perimeter T-Grid ................................................... 94

JILL Trim/Trimless .................................................................... 98JILL T-Grid .............................................................................. 100JILL LED Trim/Trimless ............................................................. 104JILL LED T-Grid ....................................................................... 106JILL ASYM Trim/Trimless ......................................................... 110JILL ASYM T-Grid .................................................................... 112JILL LED ASYM Trim/Trimless .................................................. 116JILL LED ASYM T-Grid ............................................................ 118

NATHAN ................................................................................. 122NATHAN LED .......................................................................... 124ASHLEY ................................................................................... 126ASHLEY LED ............................................................................ 128SYDNEY 18/26W Quad Tube CFL ................................................... 130 18-55W Long Twin Tube CFL ............................................. 132 32/42W Hexagonal Tube CFL ........................................... 136SYDNEY LED ........................................................................... 138

BRANDI .................................................................................. 140BRANDI LED ........................................................................... 142VANESSA ................................................................................ 144VANESSA LED ......................................................................... 146VANESSA LED Wall Graze ..................................................... 148VANESSA LED Wall Wash ...................................................... 150

WP SYSTEM Fluorescent Standard Strip .................................................................... 154 Standard Staggered ......................................................... 156 Sliding Adjustable Staggered .......................................... 158 Diagonal Staggered ......................................................... 160 Side Mount ......................................................................... 162 Low Profile .......................................................................... 164 Mini Profile .......................................................................... 166 Acrylic Lens ........................................................................ 168 Under Shelf ......................................................................... 170 Incandescent Strip ............................................................ 172WP LED ................................................................................... 174WP LED 450 ............................................................................ 176 GLOSSARY ............................................................................. 178

Architectural

Recessed

Cove

SpecificationGradeStrip

Wet Location

www.birchwoodlighting.com

2

Birchwood Lighting • 2911 Dow Avenue • Tustin, CA 92780 • 714.550.7118 fax 714.550.7151

ConstructionHeavy gauge round extruded aluminum housing. 1⁄4” thick precision-machined aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.

LampingT5, T5HO or T8 fluorescent lamps available in cross-section. Integral electronic ballast standard in 2.25”(T5 only) and 3.25” profiles. Remote electronic ballast standard in 1.25” profile. Dimming ballasts and emergency battery pack options available, consult factory.

Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths (6’ and 8’ not available for 125). Continuous run mounting available featuring internal adjoining mounting hardware enabling straight and precise rows. See installation section for more details.

Finishes(SC) Satin Clear anodized is standard finish. Other powder coat finishes available. Consult factory for details.

Acrylic Lens Options(FW) Frosted White.

Mounting Options(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable, (STK) Stack mount with straight or bent arm options extending as single-sided or double-sided from the stack housing. (RAS) Rotational Arm System accessory provides 361º directional and lockable aiming with all mounting styles. See ordering guide for possible configurations.

Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.

FIXTURE SPECIFICATIONS

HAILEY’s round linear fluorescent profile features multiple mounting, lens and lamping options within 1.25”, 2.25”, or 3.25” diameter extruded aluminum housings. The (RAS) Rotating Arm System, combined with arm, cable or stack light mounting configurations, allows 361º lockable aiming for precise light distribution on the vertical, horizontal or ceiling plane. Continuous run installations deliver nearly seamless lines of efficient illumination by utilizing precision-engineered connecting hardware which remains invisible within the smooth extruded-aluminum housing. Frosted White acrylic lenses deliver light efficiently to any interior application or design.

HAILEY is sophistication, versatility and efficiency combined to elevate your specification. Available as single or double T5, T5HO or T8 lamping in 2’ to 8’ nominal lengths.

UL and c-UL listed for dry and damp locations.

HAILEY1.25”, 2.25”, 3.25” Round Linear Fluorescent

RAS | STK | CSS

RAS STK

HAILEY 225 CSS-R

Made in the USA

V-0417

Type: Job Name:

Due to a program of continuous improvement specifications are subject to change without notice.

© 2017 Birchwood Lighting, Inc. All rights reserved.


3

Birchwood Lighting • 2911 Dow Avenue • Tustin, CA 92780 714.550.7118 fax 714.550.7151

HAILEY1.25”, 2.25”, 3.25”Round Linear Fluorescent

RAS | STK | CSS

1”

VARIOUS LENS OPTIONS

T5 OR T5HO LAMPREFLECTOR

EXTRUDED ALUMINUMHOUSING

1 1/4”

1 13/16”

INTEGRAL BALLAST (T5/T5HO NON-DIM ONLY)

OPTIMIZED EXTRUDEDREFLECTOR (T5 or T5HO)


T5, T5HO, or T8,


2 1/4”

2 3/8”

INTEGRAL BALLAST

HIGH EFFICACY REFLECTOR


T5 OR T8 LAMP(S)


3 1/4”

(REMOTE BALLAST)

Dimensions

Model

HAI-1251.25” diameter

HAI-2252.25” diameter

HAI-325-13.25” diameter1 lamp in cross section

HAI-325-23.25” diameter2 lamps in cross section

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 1,7

8 - 8’ 1,7

CR_3,7

Continuous Run

Lens

FW - Frosted White

NL - No Lens

Voltage

120277

Ballast

EB - Electronic(standard)

Dimming 2

HL38 - Hi-Lume 3DES8 - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Mounting

CSS - Cable Suspended(36” standard)

RAS - Rotational Arm System

STK1 - Stack MountSingle side arm mount

STK2 - Stack MountDouble side arm mount

LampType

StandardT5T5HO6

T81,2

NOTES1 not available for 1252 remote ballast for 2253 specify length in nominal feet 4 see HAILEY options sheet for selections5 contactfactoryforcustomfinish6 (2)T5HOlampsnotavailableonlensedfixture7 staggered lamping standard on 325 6’ and longer8 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control, for digital dimming control (E1/E2), consult factory

Finish

AnodizedSC - Satin Clear

Powder CoatMW - Matte WhiteFB - Flat BlackCUP - Custom5

125

225

325

V-0417

CSS

RA

SST

K

SPECIFICATION CODE RAS only4CSS selection options only4 STK only4

model lamp length finish lens voltage ballast mounting orientation standard standard standard standard standard cover arm arm arm arm option cable cord color canopy canopy cover plate length style length height length4 finish plate finish

Options

Orientation4

Cable Length4

Cord Color4 Canopy4

Canopy Finish5

Cover Plate/ Knuckle4

Cover Finish5

Arm Length4

Arm Style4 Arm Length4 Arm Height4

Custom Finish5

EM - Emergency Battery Pack TB - Cable Tie Back


4


HAILEY1.25”, 2.25”, 3.25” Round Linear Fluorescent

RAS | STK | CSS - Options Page

HAILEY 325 CSS

HAILEY 225 CSS-R

V-1215

CSS Options

NOTE1 knucklesmatchhousingfinish

Orientation DR - Direct IN - Indirect R - Rotational with 1.25” knuckle1

R2 - Rotational with 2.25” knuckle1


Cable Length Options36 - 36” (standard)72 - 72”120 - 120” Power Cord Color OptionsW - WhiteB - BlackG - Gray (standard)

Canopy OptionsSTND - Bracket bar w/5” round canopyNC - Nocanopy1⁄4-20sideexitcablegripper (1⁄4-20studprovidedbyothers) CU - Custom (contact factory)

Canopy Finish OptionsMW - Matte WhiteSMT - SilverMatteTextureCUP - Custom (contact factory)

Stack Options

STK2-SADouble Stack Straight Arm

STK1-BASingle Stack Bent Arm

Arm Length6 - 6” 9 - 9”12 - 12”18 - 18”CUL - Custom(specify length ininchesex:CUL28)

Arm StyleSA - Straight ArmBA - Bent ArmCA - Custom(supply drawing)

Bent Arm Height6” (standard)CUH - Custom Height(specify length ininchesex:CUH28)

NOTEcoverplates,knuckles,andarmmatchhousingfinish

NOTEknucklesandarmmatchhousingfinishstackhousingstandardissilverpowdercoatfinish

HAILEY 225 RAS

RAS Options

Maxarmlengthswithoutadditionalsupport*Forlengthslongerthanmax,Specify“TB”inoption section for aircraft cable tie back.

Arm Length6 - 6” (standard)9 - 9”12 - 12”18 - 18”CUL - Custom(specify length in inchesex:CUL28)

Cover Plate FinishSC - Satin Clear (standard) MW - Matte WhiteFB - Flat BlackCUP - Custom Powder Coat

Cover Plate/ Knuckle/Trim Ring4CP - R 4” Cover Plate with 1.25” Knuckle (stnd)4CP - R2 4” Cover Plate with 2.25” Knuckle4CP - R3 4” Cover Plate with 3.25” Knuckle1TR - R 1 1⁄4” Trim Ring with 1.25” knuckle1TR - R2 1 1⁄4” Trim Ring with 2.25” knuckle1TR - R3 1 1⁄4” Trim Ring with 3.25” knuckle

4’ 6’ 8’125 18” N/A N/A225 18” 12” 9”325 12” 9” 6”

Type: Job Name:




5


HAILEY1.25”, 2.25”, 3.25”Round Linear Fluorescent

Application

HAILEY STK1-SA


6


ConstructionHeavy gauge round extruded aluminum housing. 1⁄4” thick precision-machined aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.

Finishes (SC) Satin Clear anodized is standard finish. Other powder coat finishes available. Consult factory for details.

Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths (6’ and 8’ not available for 125). Continuous run mounting available featuring internal adjoining mounting hardware enabling straight and precise rows. See installation section for more details.

Mounting Options(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable, (STK) Stack mount with straight or bent arm options extending as single-sided or double-sided from the stack housing. (RAS) Rotational Arm System accessory provides 361º directional and lockable aiming with all mounting styles. See ordering guide for possible configurations.

LED Light Engine SystemLED Light Engines are available as HLO (High Lumen Output) and SLO (Standard Lumen Output) providing efficient illumination. CLO (Custom Lumen Output) allows for end user specified lumen output or tailored wattage consumption for certain models. Consult factory for details.

Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications.

Acrylic Lens(FW) Frosted White.



HAILEY LED combines elegance and efficiency within 1.25”, 2.25” and 3.25” housing profiles of heavy duty extruded aluminum.

Variable mounting orientations make HAILEY LED highly adaptable for any interior setting. Rotating functionality (combined with arm, cable or stack mounting) will allow 361° lockable aiming of the lighting optic towards any ceiling, wall or work-plane.

Continuous run installations deliver nearly seamless lines of efficient illumination. Precision-engineered connecting hardware remains invisible within the smooth extruded aluminum housing to insure a smooth, sleek appearance. Choose from a selection of Frosted White or Linear Prismatic acrylic lenses.

HAILEY LED: sophistication, versatility and efficiency combined to elevate your specification. Available in 2’ to 8’ nominal lengths.

HAILEY LED1.25”, 2.25”, 3.25”Round Linear LED

RAS | STK | CSS

Made in the USA

RAS STK

HAILEY 125 CSS-R

V-0417


Type: Job Name:




7


HAILEY LED1.25”, 2.25”, 3.25”Round Linear LED

RAS | STK | CSS

Dimensions

Mounting





Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 1

8 - 8’ 1

CR_2, 8

Continuous Run

Lens

FW - Frosted White

Voltage

1202773476

NOTES1 not available for 1252 specify length in nominal feet3 see HAILEY options sheet for selections4contactfactoryforcustomfinish5 consult factory for EM options6 available for EB, D1, D10 drivers only7 120V only8 Continuous Run for 125-CSS is disc continous run which creates a .25” break in the continuous run of light

VARIOUS LENS OPTIONSEXTRUDED ALUMINUM

HOUSING

LED (REMOTE DRIVER)1”

1 1/4”

2 3/8”

DRIVER


LED


3 1/4”

1 13/16”



2 1/4”

LED

DRIVER

Model

HAI-LED-125 -1.25” diameter

HAI-LED-225 - 2.25” diameter

HAI-LED-325 -3.25” diameter

125

225

325

Finish



V-0417

Options

Orientation3

Cable Length3

Cord Color3 Canopy3

Canopy Finish4

Cover Plate/Knuckle3

Cover Finish4

Arm Length3


Custom Finish4

TB - Cable Tie Back EM5 - Emergency Battery Pack

CSS

RA

SST

K

Driver


DimmingD1 - 1% (nom.) 0-10VD10 - 10% 0-10VHLA27 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

SPECIFICATION CODE

model light color length finish lens voltage driver mounting orientation standard standard standard standard standard cover arm arm arm arm option engine temp cable cord color canopy canopy cover plate length style length height length3 finish plate finish

RAS only3CSS selection options only3 STK only3

LED

LightEngine

SLO - Standard Lumen OutputHLO - High Lumen OutputCLO6__ - Custom Lumen Output

CLO Calculator

125 (4000K FW lens)

SLO - 121.9lm/[email protected]/ftfixtureinputwatts,354lm/ft. HLO-119.7lm/[email protected]/ftfixtureinputwatts,706lm/ft.CLO - refer to CLO Calculator125 LED supplement info

225 (4000K FW lens)

SLO - 120.4lm/[email protected]/ftfixtureinputwatts,349lm/ft.HLO-118.2lm/[email protected]/ftfixtureinputwatts,698lm/ft.CLO - refer to CLO Calculator225 LED supplement info

325 (4000K FW lens)

SLO - 105.5lm/[email protected]/ftfixtureinputwatts,464lm/ft.HLO-99.2lm/wattdelivered@9w/ftfixtureinputwatts,893lm/ft.CLO - refer to CLO Calculator325 LED supplement info

http://www.birchwoodlighting.com/products/pdfs/lenses.pdf

http://www.birchwoodlighting.com/resources/clo/clo_calc.html


http://www.birchwoodlighting.com/products/pdfs/led_5.pdf






8


HAILEY LED1.25”, 2.25”, 3.25” Round Linear LED

RAS | STK | CSS - Options Page

HAILEY 325 CSS

HAILEY 225 CSS-R

V-1015

CSS Options








Stack Options



Arm Length6 - 6” 9 - 9”12 - 12”18 - 18”CUL - Custom(specify length ininchesex:CUL28)



NOTEcoverplates,knuckles,andarmmatchhousingfinish


HAILEY 225 RAS

RAS Options



Cover Plate FinishSC - Satin Clear (standard)MW - Matte WhiteFB - Flat BlackCUP - Custom Powder Coat

4’ 6’ 8’125 18” N/A N/A225 18” 12” 9”325 12” 9” 6”


Type: Job Name:




9


CUSTOM ALTERNATING DIRECT/INDIRECT FIXTURE CONFIGURATION

HAILEY LED1.25”, 2.25”, 3.25” Round FixtureRound Linear LED

Custom Options


10


ConstructionHeavy gauge 2.25” round extruded aluminum housing. Precision-machined end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance. Fixtures are available in 2’, 3’, 4’ and 5’ nominal lengths.

MountingBack housing is suitable for direct mounting to wall or hard-ceiling surfaces.

Acrylic Lens(FW) Frosted White.






Whether you’re lighting the vertical or horizontal plane, HAILEY 225 Rotational Surface Mount (RSM) LED is the perfect lighting instrument to deliver even, efficient and fully-directional illumination to any specification grade lighting application.

This elegant 2.25” round linear LED luminaire features our 180º rotational lens system with positive stop, enabling exact aiming capabilities to place light specifically where you want it. HAILEY 225 RSM LED is ideal for commercial and architectural interior projects, such as: offices, institutional, retail, hospitality or heath care.

The versatile elegance of HAILEY 225 RSM LED offers grace-in-motion for even the most demanding lighting specifiers.


HAILEY LED 225 RSM2.25” Round FixtureLED - SLO/HLO/CLO

RSM - Rotational Surface Mount

Made in the USA

V-0417

Type: Job Name:




11


Model

HAI-LED-225-RSM2.25” aperatureRotational Surface Mount

Nominal Length

2 - 26 1⁄16”3 - 37 11⁄16”4 - 49 5⁄16”5 - 60 15⁄16”

Voltage

120 277 3473

SPECIFICATION CODE

model lightengine colortemp length finish lens voltage driver option

Dimensions

V-0417

Lens

FW - Frosted White

NOTES1 consultfactoryforcustomfinish2 consult factory for EM options3 available for EB, D1, D10 drivers only4 120V only

HAILEY LED 225 RSM2.25” Round FixtureLED - SLO/HLO/CLO


2-1/4”

OPTIMIZED REFLECTOR/ HEAT SINK


DRIVER


2 1/4”

3-3/8”

1-11/16”

Option

EM2 - Emergency Battery Pack

Finish



Driver


DimmingD1 - 1% (nom.) 0-10VHLA24 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 series EcoSystemDALI - DALI

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

LED

LightEngine


CLO Calculator

225 (4000K FW lens)






12


HAILEY 225-RSM2.25” Round FixtureT5, T5HO and T8


ConstructionHeavy gauge 2.25” round extruded aluminum housing. Precision-machined end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance. Fixtures are available in 2’, 3’,and 4’ nominal lengths.

MountingExtruded Back housing is suitable for direct mounting to wall or hard-ceiling surfaces.

Acrylic Lens Options(FW) Frosted White.


LampingT5, T5HO or T8 linear fluorescent lamps available. Integral electronic ballast standard. Dimming ballasts and (EM) Emergency battery pack options available, consult factory for compatibility.



Whether you’re lighting the vertical or horizontal plane, HAILEY 225 Rotational Surface Mount (RSM) is the perfect lighting instrument to deliver even, efficient and fully-directional illumination to any specification grade lighting application.

This elegant 2.25” round linear luminaire features our 180º rotational lens system with positive stop, enabling exact aiming capabilities to place light specifically where you want it. HAILEY 225 RSM is ideal for commercial and architectural interior projects, such as: offices, institutional, retail, hospitality or heath care.

The versatile elegance of HAILEY 225 RSM offers grace-in-motion for even the most demanding lighting specifiers.


Made in the USA

V-0417

Type: Job Name:




13


HAILEY 225-RSM2.25” Round FixtureT5, T5HO and T8


HAI-225-RSM

Model

HAI-225-RSM2.25” aperatureRotational Surface Mount

Voltage

120 277

SPECIFICATION CODE

model LampType length finish lens voltage ballast option

Dimensions

Lens

FW - Frosted White

NOTES1 consultfactoryforcustomfinish2 consult factory for EM options

Option2

EM - Emergency Battery Pack

Finish



Ballast


DimmingHL3 - Hi-Lume 3DES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Nominal Length

2 - 2’3 - 3’4 - 4’

LampType

StandardT5T5HOT8

2-1/4”

INTEGRAL BALLAST

OPTIMIZED REFLECTOR VARIOUS LENS OPTIONS

T5, T5HO, OR T8 LAMP


2 1/4”

3-3/8”

1-3/8”

T5/T5HO T82’ 25 3⁄10” 27”3’ 37 2⁄10” 39”4’ 49” 51”

Fixture Lengths

V-0417


14


ConstructionHeavy gauge square extruded aluminum housing. 1⁄4” thick precision-machined aluminum end-caps. Extruded acrylic lenses specifically engineered to maximize the performance and transmission from a variety of light sources.

LampingT5, T5HO or T8 linear fluorescent lamps available. Integral electronic ballast standard in T5 2.25” and 3.25” profiles. Remote electronic ballast standard in 1.25” profile. Dimming ballasts and (EM) Emergency battery pack options available, consult factory for compatibility.

Mounting Options(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable, (SM) Surface mount, or (STK) Stack mount with straight or bent arm options extending as single-sided or double-sided from the stack housing. (RAS) Rotational Arm System accessory provides 361º directional and lockable aiming for all mounting styles. See ordering guide for possible configurations.

Acrylic Lens and Louver Options(FW) Frosted White flush lens or (RLW) Reveal Frosted White with 3/8” extension. (FBLSS) Flat Blade Louver Semi-Specular.


Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths. Continuous run mounting available featuring internal adjoining mounting hardware enabling straight and precise rows. See installation section for more details.



KELSEY’s square linear fluorescent profile features multiple mounting, lens and lamping options within 1.25”, 2.25”, or 3.25” extruded aluminum housings. The (RAS) Rotating Arm System (available with arm, cable or stack light mounting configurations) allows 361º lockable aiming for precise light distribution on the vertical, horizontal or ceiling plane. (SM) Surface mounting is also available. Continuous run installations deliver nearly seamless lines of efficient illumination by utilizing precision-engineered connecting hardware which remains invisible within the smooth extruded-aluminum housing. Frosted white flush or reveal 3/8” extended acrylic lenses deliver light efficiently to any interior application or design. Flat Blade Semi-Specular Louvers deliver light efficiently to any interior application.

KELSEY offers smooth directional linear illumination within a sharp, streamlined architectural profile. Available as single or double T5, T5HO or T8 lamps, in 2’ to 8’ nominal lengths.


KELSEY1.25”, 2.25”, 3.25”Square Linear Fluorescent

CSS | RAS | SM | STK

Made in the USAKELSEY 225 RAS

KELSEY 225 CSS-R

V-0216

KELSEY 325 RLW Lens

Type: Job Name:




15




Dimensions

Model

KEL-1251.25”

KEL-2252.25”

KEL-325-13.25” 1 lamp in cross section

KEL-325-23.25” 2 lamps in cross section

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 7

8 - 8’ 7

CR_3,7

Continuous Run

Lens

FW - Frosted White

RLW - Reveal Frosted White 3/8”extended

FBLSS1 - Flat Blade LouverSemi-Specular

Voltage

120277

Ballast


Dimming 2

HL38 - Hi-Lume 3DES8 - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Mounting



SM - Surface Mount



LampType

T5T5HO6

T81,2

NOTES1 not available for 1252 remote ballast for 2253 specify length in nominal feet, 4 see KELSEY option sheet for selections5 contactfactoryforcustomfinish6 (2)T5HOlampsnotavailableonlensedfixture7 staggered lamping standard on 325 6’ and longer8 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control for digital dimming control (E1/E2), consult factory

Options

Orientation4

Cable Length4

Cord Color4 Canopy4

Canopy Finish5


Cover Finish5

Arm Length4


Custom Finish5

EM - Emergency Battery Pack TB - Cable Tie Back

Finish



125

225

325

V-0216

CSS

RA

SST

K

SPECIFICATION CODE RAS only4CSS selection options only4 STK only4

model lamp length finish lens voltage ballast mounting orientation standard standard standard standard standard cover arm arm arm arm option cable cord color canopy canopy cover plate length style length height length4 finish plate finish

2 1/4”

2 1/4”

INTEGRAL BALLAST (T5/T5HO NON-DIM ONLY)

OPTIMIZED REFLECTORREFLECTOR (T5 or T5HO)

EXTRUDED ALUMINUM HOUSING

1 LAMP T5, T5HO 1 LAMP T8

INTEGRAL BALLAST

OPTIMIZED REFLECTOR

1 OR 2 LAMP T5, OR T8


3 1/4”

3 1/4”

*LED - see specific cutsheet

1-1/4”

1-1/4”

T5 OR T5HO LAMP

REFLECTOREXTRUDED ALUMINUMHOUSING

(REMOTE BALLAST)3/8”

3/8”

3/8”

STANDARD FLUSH LENSor FBLSS WITH DIFFUSING LAYER

REVEAL LENS 3/8”

STANDARD FLUSH LENS

REVEAL LENS 3/8”

REVEAL LENS 3/8”


KEL-CSS-RLW

3/8”


16



CSS | RAS | SM | STK - Options Page


Arm Length6 - 6”9 - 9”12 - 12”18 - 18”CUL - Custom(specify length ininchesex:CUL28)


KELSEY 325 CSS

KELSEY 225 CSS-R



V-1215


Stack Options

CSS Options








RAS Options

KELSEY 225 RAS




4’ 6’ 8’125 18” 12” 12”225 18” 12” 9”325 12” 9” 6”

NOTECoverplate,knuckles,andarmmatchhousingfinish


Type: Job Name:




17


KELSEY1.25”, 2.25”, 3.25” Square Linear Fluorescent

V-1215

KELSEY 225 CSS


18


KELSEY LED1.25”, 2.25”, 3.25”Square Linear LED


V-0417

ConstructionHeavy gauge square extruded aluminum housing. ¼” thick precision-machined aluminum end-caps. Extruded acrylic lenses specifically engineered to maximize the performance and transmission from a variety of light sources.

Mounting Options(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable, (CSS-R) Cable Suspension Rotational System, (SM) Surface mount, or (STK) Stack mount with straight or bent arm options extending as single-sided or double-sided from the stack housing. (RAS) Rotational Arm System provides 361º directional and lockable aiming for CSS or STK mounting styles. See ordering guide for possible configurations.




Acrylic Lens and Louver Options(FW) Frosted White flush lens or (RLW) Reveal Frosted White with 3/8” extension. (FBLSS) Flat Blade Louver Semi-Specular with diffusing layer.

Fixture LengthFixtures are available in 2’, 3’, 4’, 5’, 6’ and 8’ nominal lengths. Continuous run mounting available featuring internal adjoining mounting hardware enabling straight and precise rows. See installation section for more details.



KELSEY’s square linear LED profile features multiple mounting, lens and lamping options within 1.25”, 2.25”, or 3.25” extruded aluminum housings. The (RAS) Rotating Arm System (available with arm, cable or stack light mounting configurations) allows 361º lockable aiming for precise light distribution on the vertical, horizontal or ceiling plane. (SM) Surface mounting is also available. Continuous run installations deliver nearly seamless lines of efficient illumination by utilizing precision-engineered connecting hardware which remains invisible within the smooth extruded-aluminum housing. Frosted white flush or reveal 3/8” extended acrylic lenses deliver light efficiently to any interior application or design. Flat Blade Semi-Specular Louvers deliver light efficiently to any interior application.

KELSEY offers smooth directional linear illumination within a sharp, streamlined architectural profile. Available in 2’ to 8’ nominal lengths.


Made in the USA

RAS RLW Lens

KELSEY 125 CSS- R

Type: Job Name:




19


KELSEY LED1.25”, 2.25”, 3.25”Square Linear LED


SPECIFICATION CODE

model light color length finish lens voltage driver mounting orientation standard standard standard standard standard cover arm arm arm arm option engine temp cable cord color canopy canopy cover plate length style length height length2 finish plate finish

RAS only2CSS selection options only2 STK only2

1-1/4”

1-1/4”

RLW - REVEAL LENS 3/8”

LIGHT ENGINE (REMOTE DRIVER)


DRIVER



3 1/4”

3 1/4”

KEL-LED-225-IB DRIVEREXHIBITS A SUBTLE LINEAR LINE OF LIGHT

KEL-LED-225-RB DRIVER IS REMOTEPROVIDING AN EVEN LENS FILL

2 1/4”

2 1/4”



LIGHT ENGINE

LIGHT ENGINE

3/8”



KEL-RLW LENS OPTION

3/8”

3/8”

3/8”

STANDARD FLUSH LENS

Dimensions

Mounting



SM - Surface Mount



Nominal Length

2 - 2’3 - 3’4 - 4’5 - 5’6 - 6’8 - 8’

CR__1

Continuous Run

Lens

FW - Frosted White


FBLSS4 - Flat Blade LouverSemi-Specular

Voltage

1202773477

Driver


DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10VHLA26 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

125

225

325

Finish



Options

Orientation2

Cable Length2

Cord Color2

Canopy2 Canopy Finish3


Cover Finish3

Arm Length2


Custom Finish3 EM5 - Emergency Battery PackTB - Cable Tie Back

CSS

RA

SST

K

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

LED

LightEngine


CLO Calculator

KEL-LED-125 (4000K FW lens)

SLO - 97.5lm/[email protected]/ftfixtureinputwatts,283lm/ft. HLO-95.7lm/[email protected]/ftfixtureinputwatts,565lm/ft.CLO - refer to CLO Calculator125 LED supplement info KEL-LED-225-IB (4000K FW lens)

SLO - 100.5lm/[email protected]/ftfixtureinputwatts,292lm/ft.HLO-98.7lm/[email protected]/ftfixtureinputwatts,583lm/ft.CLO - refer to CLO Calculator225 LED supplement info

KEL-LED-225-RB (4000K FW lens)

SLO - 72lm/[email protected]/ftfixtureinputwatts,317lm/ft.HLO-67.7lm/wattdelivered@9w/ftfixtureinputwatts,609lm/ft.CLO - refer to CLO Calculator225 LED supplement info

KEL-LED-325 (4000K FW lens)


V-0417

Model

KEL-LED-125 -1.25”

KEL-LED-225-IB8 - 2.25” integral driver

KEL-LED-225-RB8 - 2.25” remote driver

KEL-LED-325 -3.25”

NOTES1 specify length in nominal feet 2 see KELSEY option sheet for selections3 contactfactoryforcustomfinish4 only available in 225 and 3255 consult factory for EM options6 120V only7 available for EB, D1, D10 drivers only8 IBoptionexhibitsasubtlelinearlineoflightonthelens RBoptionprovidesanevenlensfill











20




Arm Length6 - 6”9 - 9”12 - 12”18 - 18”CUL - Custom(specify length ininchesex:CUL28)


CSS Options

KELSEY 325 CSS

KELSEY LED1.25”, 2.25”, 3.25” Square Linear LED

CSS | RAS | SM | STK - Options Page

Stack OptionsRAS Options

KELSEY 225 CSS-R

KELSEY 225 RAS




4’ 6’ 8’125 18” 12” 12”225 18” 12” 9”325 12” 9” 6”


NOTECoverplate,knuckles,andarmmatchhousingfinish


NOTE1 knucklesmatchhousingfinish V-0117








Type: Job Name:




21


KELSEY LED1.25”, 2.25”, 3.25” Square Linear LED

Application

KELSEY 225 LED CSS


22


V-0516

ConstructionHeavy gauge extruded aluminum housing. 1⁄4” thick precision machined aluminum end-caps. Extruded acrylic lenses specifically engineered to maximize the performance and transmission from a variety of light sources.

Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for a straight and precise installation. See options for details.

Finishes(SC) Satin Clear anodize is standard. (MW) Matte White or (FB) Flat Black powder coat finishes optional. Custom finishes available - consult factory.

LampingSingle T5, T5HO or T8 linear fluorescent lamps available in cross section. Integral ballast standard. Dimming and emergency battery pack options available. Consult factory for ballast availability and specifications.

MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord included as standard. Please specify (CSS-DR) Cable Suspended Direct or (SM) Surface Mount. Other cable lengths and power cord styles are available, see options guide or consult factory.

Acrylic Lens and Indirect Shield Options(FW) Frosted White, (FT) Prismatic Sided Frosted White. (TDW) Teardrop shaped Frosted White and (INS) Indirect Shield in either silver, flat black or matte white powder coat finish.



With its 2.25” or 3.25” wide linear profile, NOLAN provides specification grade design and luminance to the refined architectural market.

Featuring our highest quality 1⁄4” machined aluminum end-caps and heavy gauge housing, NOLAN is handcrafted to remain beautiful while still working hard. A variety of mounting configurations allows NOLAN the flexibility to be utilized in applications such as: offices, corridors, residential or retail establishments. Surface mounted, the low profile of NOLAN also meets ADA requirements.

The precision-edged extruded acrylic lens satisfies the design sophistication required by specifiers, yet also provides effortless removal and exact snap-in lens replacement every time, making NOLAN a dream to maintain.

NOLAN2.25”, 3.25”T5/T5HO/T8

Cable Suspended | Surface


325/225

325-CSS-DRMade in the USA

225-TDW-SM SM-INS

Type: Job Name:




23


V-0516

Model

NOL-225 -NOLAN 2.25” wide linearprofile

NOL-325 -NOLAN 3.25” wide linearprofile

Mounting

CSS-DR - Cable Suspended Direct

SM - Surface Mount

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 4

8 - 8’ 4

CR_1,4

Continuous Run

Finish



Voltage

120 277

Ballast

EB - Electronic

DimmingHL37 - Hi-LumeES7 - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Options

CSS3 - Cable LengthCSS3 - Power Cord ColorCSS3 - CanopyCSS3 - Canopy Finish

INSS9 - Indirect Shield Silver

INSM9 - Indirect Shield Matte White

INSF9 - Indirect Shield Flat Black


SPECIFICATION CODE

model #oflamps lamptype length finish lens voltage ballast mounting standard standard standard standard options options cablelength cordcolor canopy canopyfinish

NOTES1 specify length in nominal feet, see CRmatrixpage2 contactfactoryforcustomfinish3 see CSS options above for non-standard selections4 staggered lamping for 6’ and longer to reduce socket shadow, (325 only)5 consult factory for EM options6 consult factory for 2-lamp in cross section option, (325 only)7 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control for digital dimming control (E1/E2), consult factory8 325 only9 standalonefixturesonly10 225 only, not available with INS option

Dimensions

CSS selections only3

Lamp Type

T5T5HOT88

INTEGRAL BALLAST

1 LAMP CROSS SECTION T5, T5HO,

OR T8 (325 only)


CROSS SECTION

ACRYLIC LENS

3 1/4”

3 1/4” WALL MOUNT

CEILING MOUNT

OPTIONSSURFACE MOUNTING (SM)

4 1/2”

See

inst

ruct

ion

shee

t for

fixt

ure

leng

th,

add

1-1/

4” to

leng

th o

f spe

cifie

d fix

ture

2 1/4”

3 1/4”

CROSS SECTION CROSS SECTION

2 1/4”

INTEGRAL BALLAST

1 LAMP CROSS SECTION T5, T5HO


ACRYLIC LENS

Power Cord ColorW - WhiteB - BlackG - Gray (standard)

Cable Length36 - 36” (standard)72 - 72”120 - 120”

Canopy FinishMW - Matte White (standard)SL - SilverFB - Flat BlackCUP - Custom (contact factory)

CanopySTND - Bracket bar w/5” round canopyNC - No canopy 1⁄4-20sideexit cable gripper (1⁄4-20 stud provided by others)CU - Custom (contact factory)

CSS Options

NOLAN2.25”, 3.25”T5/T5HO/T8


Lens

FW - Frosted White

TDW10 - Teardrop Frosted White

FT8 - PrismaticSided Frosted White

*see instruction sheet for more information

**see option sheet for details

# of lamps6 in cross section

1 - 1 lamp

FT - Prismatic Sided Frosted White

Frosted WhiteClear

Prismatic Sides

INS - Indirect Shield

(standalone fixturesonly)

CSS

325225

FT Lens Description (325 only)

http://www.birchwoodlighting.com/resources/cr_led_matrix/cr_main.html

http://www.birchwoodlighting.com/resources/instr_sheets/nolan.html

http://www.birchwoodlighting.com/downloads/options.pdf


24


V-0417


With its 2.25” and 3.25” wide linear profile, NOLAN provides specification grade design and luminance to the refined architectural market.

Featuring our highest quality 1⁄4” machined aluminum end-caps and heavy gauge housing, NOLAN is handcrafted to remain beautiful while still working hard. A variety of mounting configurations allows NOLAN the flexibility to be utilized in applications such as: offices, corridors, residential or retail establishments. Surface mounted, the low profile of NOLAN also meets ADA requirements.

The precision-edged extruded acrylic lens satisfies the design sophistication required by specifiers, yet also provides effortless removal and exact snap-in lens replacement every time, making NOLAN a dream to maintain.


NOLAN LED2.25”, 3.25” Profile


325/225

CSS-DRMade in the USA

225-TDW-SM


Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for a straight and precise installation. See options for details.




Acrylic Lens and Indirect Shield Options(FW) Frosted White, (TDW) Teardrop shaped Frosted White and (FT) Prismatic Sided Frosted White. (INS) Indirect Shield in either flat black, silver or matte white powder coat finish.

MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord included as standard. Please specify (CSS-DR) Cable Suspended Direct or (SM) Surface Mount. Other cable lengths and power cord styles are available, see options guide or consult factory.


SM-INS

Type: Job Name:




25


V-0417

Model

NOL-LED-225 NOLAN 2.25” wide linear profile

NOL-LED-325 NOLAN 3.25” wide linear profile

Mounting

CSS-DR - Cable Suspended Direct

SM - Surface Mount

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

Finish



Voltage

120 277 3476

Options


INSS5 - Indirect Shield Silver

INSM5 - Indirect Shield Matte White

INSF5 - Indirect Shield Flat Black


SPECIFICATION CODE

model light color length finish lens voltage driver mounting standard standard standard standard options options engine temp cablelength cordcolor canopy canopyfinish

NOTES1 specify length in nominal feet, see CRmatrixsheet2 contactfactoryforcustomfinish3 see CSS options above for non-standard selections4 consult factory for EM options, remote only for 2255 standalonefixturesonly6 available for EB, D1, D10 drivers only7 120V only8 325 only9 225 only, not available with INS option

Dimensions


INTEGRAL BALLASTINTEGRAL BALLAST


3 1/4”3 1/4”

VARIOUS ACRYLIC LENS OPTIONS

FW ACRYLIC LENS

WALL MOUNT

CEILING MOUNT

OPTIONSSURFACE MOUNTING (SM)

4 1/2”

See

inst

ruct

ion

shee

t for

fixt

ure

leng

th,

add

1-1/

4” to

leng

th o

f spe

cifie

d fix

ture

3 1/4”

CROSS SECTION

LEDLED

2 1/4”

3 1/4”

CROSS SECTION

2 1/4”


TDWACRYLIC LENS



Canopy FinishMW - Matte WhiteSMT - SilverMatteTextureFB - Flat BlackCUP - Custom (contact factory)


CSS Options

NOLAN LED2.25”, 3.25” Profile


Lens

FW - Frosted White

TDW9 - Teardrop Frosted White

FT8 - PrismaticSided Frosted White

*see instruction sheet for more information **see option sheet for details

FT - Prismatic Sided Frosted White

Frosted WhiteClear

Prismatic Sides

INS - Indirect Shield

CSS

FT Lens Description (325 only)

Driver



ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

LED

LightEngine


CLO Calculator

225 (4000K FW lens)

SLO - 120.4lm/[email protected]/ftfixtureinputwatts,349lm/ft. HLO-118.2lm/[email protected]/ftfixtureinputwatts,698lm/ft.CLO - refer to CLO Calculator225 LED supplement info

325 (4000K FW lens)

SLO - 112.8lm/[email protected]/ftfixtureinputwatts,497lm/ft.HLO-106lm/wattdelivered@9w/ftfixtureinputwatts,955lm/ft.CLO - refer to CLO Calculator325 LED supplement info

325225-FW225-TDW


http://www.birchwoodlighting.com/resources/instr_sheets/nolan.html








26


COLLINDirect/Indirect Luminaire2.25” or 3.25” T5/T5HO/T8

Cable Suspended | Wall Mount


LampingCOLLIN 225 is single T5, T5HO or T8 linear fluorescent lamps only. COLLIN 325 is single or double T5, T5HO or T8 linear fluorescent lamps. 325 staggered lamping standard for 6’ nominal lengths (or longer) on continuous runs. Integral ballast standard. 2 circuit (2CKT) option allows dual switching. Dimming and emergency battery pack options available. Consult factory for ballast availability and specifications.

Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for a straight and precise installation.


Lens and Louver Options(FW) Frosted White flush lens or (RLW) Reveal Frosted White with 3/8” extension. (FBLSS) Flat Blade Louver Semi-Specular with diffusing layer.

MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord included as standard. Please specify (CSS) Cable Suspended or (WM) Wall Mount. Other cable lengths and power cord styles are available, see options guide or consult factory.



Our direct/indirect linear luminaire, COLLIN, is designed to deliver strong and even illumination while “disappearing” into any architectural interior surrounding.

Concealed within COLLIN’s modern rectangular profile lies a true workhorse fixture combining multiple direct or indirect lighting options using T5, T5HO or T8 linear. COLLIN also offers optional 2-Circuit (2CKT) switching capabilities for lighting the ceiling or work plane simultaneously, or individually, providing alternative light distribution when and where you need it most - or don’t.

Aircraft cable suspension or surface mounting options allow COLLIN to render style and substance to any specification-grade lighting project.


Made in the USA

COLLIN CSS FBLSS

RLW Lens

V-0216

Type: Job Name:




27


V-0216

COLLINDirect/Indirect Luminaire2.25” or 3.25” T5/T5HO/T8


SPECIFICATION CODE

model lamp lamps length finish standard standard voltage ballast mounting standard standard standard standard option option orientation direct indirect cable cord color canopy canopy lens lens length finish


NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 see options below for non-standard selections4 staggered lamping for 6’ and longer on 3255 consult factory for EM options6 not available in two lamp cross section with lens options7 225 FBLSS T5/T5HO only8 325 only9 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control for digital dimming control (E1/E2), consult factory10 FBLSS option is direct with FW as indirect FW. RLW option is the same selection on both direct and indirect sides

*see options sheet for details

Model

COL-225-2.25” direct/ indirect

COL-325-3.25” direct/ indirect

Mounting

CSS - Cable Suspended

WM8 - Wall Mount

WMB - Wall Mount Bracket

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 4

8 - 8’ 4

CR_1,4

Continuous Run

Finish


Powder CoatMW - Matte WhiteFB - Flat BlackCUP2 - Custom

Voltage

120 277

Options

CSS3 - Cable LengthCSS3 - Power Cord ColorCSS3 - Canopy CSS3 - Canopy Finish

EM5 - Emergency Battery Pack2CKT - 2 Circuit Switching

Lamp Type

T5T5HO6

T8

Lens

FW -FrostedWhite

RLW10 - Reveal Frosted White 3/8”extended

FBLSS10 - Flat Blade Louver Semi-Specular




CanopySTND - Bracket bar w/5” round canopyNC - Nocanopy1/4-20sideexitcablegripper (1/4-20 stud provided by others)CU - Custom (contact factory)

CSS Options

Dimensions

1DR-1IN 1DR-2IN

2DR-1IN2DR-2IN

INTEGRAL BALLAST

OPTIMIZED REFLECTOR

LAMPS


FLUSH LENS

OPTIMIZED REFLECTOR

3-1/4"

5-1/8"

2-1/4"

5-1/2"

1DR-1IN

FLUSH LENS/ 325 BAFFLE OPTIONS

225 3253/8”

3/8”

3/8” 3/8”

REVEAL LENS 3/8”

COL-CSS-RLW

3/8”

3/8”

Ballast


DimmingHL39 - Hi-Lume 3DES9 - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Lamps/Configuration

1DR-1IN - 1 lamp direct/ 1 indirect

1DR-2IN8 - 1 lamp direct/ 2 indirect

2DR-1IN8 - 2 lamps direct/ 1 indirect


• Designate (0) for No lamp option

CSS

Lamps/Configuration

225 325



28



COLLIN LEDDirect/Indirect Luminaire1.25”, 2.25”, 3.25”


Made in the USA

COLLIN LED 325 CSS

V-0417C



Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for a straight and precise installation.



Lens and Louver Options(FW) Frosted White flush lens or (RLW) Reveal Frosted White with 3/8” extension. (FBLSS) Flat Blade Louver Semi-Specular with diffusing layer.

MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord included as standard. Please specify (CSS) Cable Suspended or (WM) Wall Mount. Other cable lengths and power cord styles are available, see options guide or consult factory.



COLLIN LED, our popular direct/indirect linear luminaire, is designed to deliver strong and even illumination while “disappearing” into any architectural interior surrounding.

Concealed within COLLIN’s modern rectangular profile lies a true workhorse fixture combining multiple direct or indirect lighting options. Optional 2-Circuit (2CKT) switching capabilities for lighting the ceiling or work plane simultaneously, or individually, provide alternative light distribution when and where you need it most - or don’t.

Aircraft cable suspension or surface mounting options allow COLLIN LED to deliver style and substance to any specification-grade lighting project.

RLW Lens325, 225, 125 Profiles

Type: Job Name:




29




SPECIFICATION CODE

model configuration direct indirect color length finish lens lens voltage driver mounting light light temp direct indirect engine engine

V-0417C


Mounting


WM6 - Wall Mount

WMB - Wall MountBracket

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

Finish



Voltage

120 277 3474

*see option sheet for details




CanopySTND - Bracket bar w/5” round canopyNC - Nocanopy1/4-20sideexitcable gripper (1/4-20 stud provided by others)CU - Custom (contact factory)

CSS Options

CSS Options


Lens

FW -FrostedWhite



CSS

Configuration



• (0) designatesNo lamp option

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

DirectLightEngine

SLO - Standard Lumen OutputHLO - High Lumen OutputCLO4 - Custom Lumen Output

CLO Calculator

Driver

EB - Electronic


IndirectLightEngine


standard standard standard standard option option cable cord color canopy canopy length finish

Options

2CKT - 2 Circuit Switching


CSS SPECIFICATION CODE OPTION CODE

NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 see options below for non-standard selections4 refer to CLO Calculator for code selection CLO available for EB, D1, D10 drivers only5 120V only6 325 only7 FBLSS option is direct with FW as indirect. RLW option is the same selection on both direct and indirect sides8 consult factory for EM options

COL-LED

LED

125 (4000K FW lens) 60% Indirect / 40% Direct

SLO-SLO - 71.7lm/[email protected]/ftfixtureinputwatts,249lm/ft.Indirect,166lm/ft.DirectHLO-HLO-70.5lm/[email protected]/ftfixtureinputwatts,499lm/ft.Indirect,333lm/ft.DirectCLO - refer to CLO Calculator

125 LED supplement info

225 (4000K FW lens) 1DR-1IN* 50% Indirect / 50% Direct

SLO-SLO - 99.6lm/[email protected]/ftfixtureinputwatts, 634 lm/ft.HLO-HLO-93.6lm/wattdelivered@18w/ftfixtureinputwatts,1218lm/ft.CLO - refer to CLO Calculator225 LED supplement info

325 (4000K FW lens) 1DR-1IN* 50% Indirect / 50% Direct

SLO-SLO - 89.4lm/[email protected]/ftfixtureinputwatts, 786 lm/ft.HLO-HLO-84lm/wattdelivered@18w/ftfixtureinputwatts,1512lm/ft.CLO - refer to CLO Calculator325 LED supplement info

* For 1DR-0IN divide lm/ft and w/ft data by 2

Model

COL-LED-1251.25” Direct/ Indirect













30




Dimensions

LED MODULE

VARIOUS LENS/ BAFFLE OPTIONS

DRIVER

5-1/8"

2-1/4"

LED MODULE

REMOVABLE ALUMINUMHEAT SINK LINER

WALL MOUNT BRACKET(optional)

225

REVEAL LENS 3/8”3/8”

3/8”

LED MODULE


2-3/4"

1-1/4"

LED MODULE


125


3/8”

COL-CSS-RLW

3/8”

3/8”

5-1/2"

3-1/4"

325

3/8”

3/8”

LED MODULE


DRIVER

LED MODULE



REVEAL LENS 3/8”

V-1116

LED MODULE


DRIVER

5-1/8"

2-1/4"

LED MODULE



225


3/8”

LED MODULE


2-3/4"

1-1/4"

LED MODULE


125


3/8”

COL-CSS-RLW

3/8”

3/8”

5-1/2"

3-1/4"

325

3/8”

3/8”

LED MODULE


DRIVER

LED MODULE



REVEAL LENS 3/8”

RLW Lens Dimensions

Type: Job Name:




31





32



Modern refinement, high efficiency and versatility are the definition of CHLOE - our latest 4.75” round linear fluorescent luminaire.

With a 3.25” aperture designed to perfectly deliver direct/indirect light to the ceiling and wall or work plane, CHLOE is the perfect match for interior applications requiring high efficiency within the smooth lines of a sophisticated light instrument.

CHLOE’s streamlined outer profile encases the precision-engineered interior underpinnings of a strong powerhouse fixture.

Multiple distributions and lens effects combined with (2CKT) 2 circuit switching option, (CR) Continuous Run, or (DM) Dimming capabilities, CHLOE offers exceptional versatility for applications such as: open-plan offices, corridors, libraries or health facilities. Available in T5, T5HO and T8 lamp configurations in nominal lengths from 2’ - 8’ or continuous run.


CHLOEDirect/Indirect LuminaireT5/T5HO/T8

Cable Suspended

Made in the USA

Construction4.75” extruded aluminum housing. 1⁄4” thick precision machined aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.


Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for straight and precise installation.

MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device (included). 36” aircraft cable and (G) Gray power cord included as standard. (RAS) Rotational Arm System opton provides 361º directional and lockable aiming with all mounting styles. See ordering guide for possible configurations.

Acrylic Lens Option(FW) Frosted White.


V-1216

Type: Job Name:




33



Cable Suspended

SPECIFICATION CODE

ModelCHL-475-4.75” round direct/ indirect

Mounting

CSS - Cable SuspensionSystem

CSS-R - Cable SuspendedRotational

RAS - Rotational Arm Mount

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 7

8 - 8’ 7

CR_1,7

Continuous Run

Finish

AnodizeSC -Satin Clear Anodized


Voltage

120 277

Options

2CKT- 2 circuit switching

EM - Emergency Battery Pack5

model lamps/ lamptype length finish standard standard voltage ballast mounting options options configuration lens lens direct indirect

NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 see options on following page for non-standard selections4 consult factory for 2 circuit switching details5 consult factory for emergency battery pack info6 not available with (2) T5HO in cross section7 staggeredlampingstandardonfixturesand continuous runs 6’ and longer8 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control for digital dimming control (E1/E2), consult factory

Lamp Type

T5T5HOT8

LensDirect

FW - Frosted White

**see option sheet for details

LensIndirect

FW - Frosted White

Ballast


DimmingHL38 - Hi-Lume 3DES8 - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Lamps/Configuration





CHL-475

CSS selections only3CSS Options

Orientation3 -CSS3 - Cable LengthCSS3 - Power Cord ColorCSS3 - CanopyCSS3 - Canopy Finish

CSS

orientation standard standard standard standard cable cord color canopy canopy length finish

CSS SPECIFICATION CODE

RAS selections only3RAS Options

RAS3 - Standard Cover PlateRAS3 - Cover Plate FinishRAS3 - Arm Length

RA

S standard cover arm lengthplate/ plate knuckle finish

RAS SPECIFICATION CODE

V-1216



34


V-1215


Cable Suspended

CSS Options


Orientation/Mounting DR - Direct IN - Indirect R - Rotational with 1.25” knuckle1






RAS Options




4’ 6’ 8’125 18” N/A N/A225 18” 12” 9”325 12” 9” 6”


Type: Job Name:




35


Dimensions Distributions

1DR-1IN 1DR-2IN 2DR-1IN 2DR-2IN

Indirect

Direct

Indirect

Direct

Top Lens

OptimizedReflector

T8 or T5,T5HO Lamps

ExtrudedAluminumHousingOptimizedReflector

Bottom Lens

T8 or T5,T5HO Lamps

Ballast4 3⁄4”


Cable Suspended


36


ConstructionHeavy gauge extruded aluminum housing. 1⁄4” thick precision machined aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.


Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for a straight and precise installation



Acrylic Lens Option(FW) Frosted White.

MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device (included). 36” aircraft cable and (G) Gray power cord included as standard. (RAS) Rotational Arm System opton provides 361º directional and lockable aiming with all mounting styles. See ordering guide for possible configurations.



Modern refinement, high efficiency and application versatility are the definition of CHLOE LED - our 2.25” and 4.75” round linear LED luminaire.

Designed to deliver direct/indirect light to the ceiling, wall or work plane, CHLOE LED is the perfect match for interior applications requiring high LED efficiency within the smooth lines of a sophisticated light instrument. Dimming capability, Two-Circuit switching (2CKT), or Continuous Run (CR) options make CHLOE LED exceptionally versatile for applications such as: open-plan offices, corridors, libraries or health facilities.

CHLOE LED’s streamlined outer profile encases the precision-engineered interior underpinnings of a strong powerhouse while still maintaining an elegant profile and providing LED lighting efficiency.


CHLOE LEDDirect/Indirect2.25”, 4.75” Round Profile Luminaire

CSS | CSS-R | RAS

Made in the USA

V-0417

CHLOE 475/225 CSS

Type: Job Name:




37


V-0417


CSS | CSS-R | RAS

SPECIFICATION CODE

model direct indirect color length finish lens lens voltage driver mounting light engine light engine temp direct indirect

Model

CHL-LED-2257

2.25” rounddirect/ indirect

CHL-LED-4754.75” rounddirect/ indirect

Mounting


CSS-R - Cable Suspended Rotational

RAS - Rotational Arm Mount

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8

8 - 8’ 8

CR_1

Continuous Run

Finish



Voltage

120 277 3475

Driver

EB - Electronic

DIM - DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10VHLA26 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 see options on follow page for non-standard selections4 consult factory for EM options5 available for EB, D1, D10 drivers only6 120V only7 225fixturedriverandEMareremote8 225fixture6’lengthismadeupof(2)3’fixturesforCSS-R/RASonly 225fixture8’lengthismadeupof(2)4’fixturesforCSS-R/RASonly


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

LensDirect

FW -FrostedWhite

LensIndirect

FW -FrostedWhite

LED

DirectLightEngine


CLO Calculator

CHL-LED-

IndirectLightEngine



Orientation3 -CSS3 - Cable LengthCSS3 - Power Cord ColorCSS3 - CanopyCSS3 - Canopy Finish

CSS

orientation standard standard standard standard cable cord color canopy canopy length finish

CSS/CSS-R SPECIFICATION CODEOptions



OPTION CODERAS selections only3

RAS Options

RAS3 - Standard Cover PlateRAS3 - Cover Plate FinishRAS3 - Arm Length

RA

S standard cover armplate/ plate length knuckle finish

RAS SPECIFICATION CODE

225 (4000K FW lens)

SLO-SLO - 111lm/[email protected]/ftfixtureinputwatts,643lm/ft.HLO-HLO-109lm/[email protected]/ftfixtureinputwatts,1287lm/ft.CLO-CLO - refer to CLO Calculator


475 (4000K FW lens)

SLO-SLO - 109.9lm/[email protected]/ftfixtureinputwatts,968lm/ft.HLO-HLO-103.3lm/wattdelivered@18w/ftfixtureinputwatts,1860lm/ft.CLO-CLO - refer to CLO Calculator475 LED supplement info

Dimensions

4 3⁄4”

2 1⁄4”

475

225

Top Lens

LED Module

ExtrudedAluminumHousing

Bottom Lens

Driver

LED Module

Bottom Lens

Top Lens

ExtrudedAluminumHousing

LED Module (Remote Driver)

LED Module (Remote Driver)

Indirect

Direct

CSS/CSS-R/RASoptions continuedbelow






http://www.birchwoodlighting.com/products/pdfs/led_wide.pdf


38



CSS | CSS-R | RAS

CSS Options

NOTE

1 225CSSfixturelengths6’andlongerrequire3cablespersegment2 knucklesmatchhousingfinish3 225CSS-Rfixturelengths6’andlongeraremadeupofmultiplefixtures,6’=(2)3’sections,8’=(2)4’sections4 not available for 225

Orientation/Mounting1 DR/IN - Static Direct/IndirectR - Rotational with 1.25” knuckle2,3

R2 - Rotational with 2.25” knuckle2,3

R3 - Rotational with 3.25” knuckle2,3,4




RAS Options




4’ 6’ 8’225 18” N/A N/A475 6” 6” 6”

Cover Plate/ Knuckle/Trim Ring4CP-R 4” Cover Plate with 1.25” Knuckle (stnd)4CP-R2 4” Cover Plate with 2.25” Knuckle4CP-R33 4” Cover Plate with 3.25” Knuckle1TR-R 1 1⁄4” Trim Ring with 1.25” knuckle1TR-R2 1 1⁄4” Trim Ring with 2.25” knuckle1TR-R3 1 1⁄4” Trim Ring with 3.25” knuckle

V-0117

NOTE1 knucklesmatchhousingfinish2 225RASfixturelengths6’andlonger are made up of multiple sections3 not available for 225

Type: Job Name:




39



CSS | CSS-R | RAS

V-0117


40


TORiMinimalist Linear FixtureT5/T5HO


ConstructionFixture body, end caps and integral ballast housing are constructed of anodized aluminum. Fixtures available in nominal lengths of 2, 3, 4, 6 and 8 foot sections for (IB) Integral Ballast. Fixtures can be continuous run mounted. Curved lenses (optional) are 5⁄32” thick frosted acrylic. Reflectors (optional) constructed of die-formed aluminum.

Lamping and BallastSingle T5 or T5HO linear fluorescent lamps. (IB) Integral electronic ballast standard. (EM) Emergency battery pack or Dimming optional. Consult factory for dimmimg, ballast and emergency battery pack availability.

Finishes(SC) Satin Clear anodize is standard. Standard canopy finish is (MW) Matte White powder coat paint unless otherwise specified. Other custom powder coat finishes available, see options guide or consult factory.

MountingField-adjustable aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord included as standard. Also suitable as (SM) Surface Mount fixture with (IB), (SSM) Suspended Surface Mount with (RB) or (AM) Arm Mount with machined aluminum arm. Other cable lengths and power cord styles are available, see options guide or consult factory.

OptionsAcrylic lenses: (AT) Acrylic Tube, (LCA) Lower Curved Acrylic, (TFSA) TF Side Acrylics. Specify lens preference, see guide for selection. Reflectors: all available as solid or perforated (ISR) Indirect Symmetric, (AAR) Adjustable Asymmetric, (MRR) Mini Rotational. Power Cords: (G) Gray, (W) White, (B) Black. Canopies: See options guide for color finish selection.



The TORi linear fluorescent luminaire combines design versatility and elegance within a sleek minimalist profile. Precision engineered components create almost seamless continuous runs, while multiple diffuser options provide beautiful over-all illumination. Integral and remote ballast options accommodate single T5 or T5HO lamping. TORi inspires endless possibilities for any design application.

LCA AAR

ISCRP

RB - Remote Ballast

IB - Integral Ballast

TFSA

V-0117


Made in the USA

Type: Job Name:




41


SOCKET COVER

T5 LAMP2-1/2”1-1/8”O

Model

TOR-RBRemote Ballast

TOR-IBIntegral Ballast

Mounting


SM - Surface Mount(Internal Ballast Only)

SSM - Suspended Surface Mount

AM - Arm Mount

Lamp Type

T5 T5HO5

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 6

8 - 8’ 6

CR_1

Continuous Run

Finish

SC - Satin ClearCUP - Custom2

Voltage

120277

Options


Arm Length3

Cover Plate8

Cover Plate Finish8

Acrylic LensReflectorOptions


SPECIFICATION CODE

model lamp length voltage ballast finish mounting standard standard standard standard arm cover cover lensor finish option cable cord canopy canopy length plate finish reflector length color finish

NOTES1 specify length in nominal feet, see CRmatrixpage2 contactfactoryforcustomfinish3 see options page for non-standard selections4 consult factory on (RB) dimming ballasts due to lead length restrictions5 not available with AT-FC or AT-FW6 IB only, 6’ are made up of (2) 3’ lamps 8’ are made up of (2) 4’ lamps 7 consult factory for EM options8 specify for RB-AM option only9 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control for digital dimming control (E1/E2), consult factory

Dimensions -RB

TOR - RB - AM

1-1/8”O

2-5/16”

SOCKET COVER

T5 LAMP

3/64” AIRCRAFT CABLE

2-1/2”

TOR - RB

CSS / SSM selections only Lens / Reflector Options



*see instruction sheet for more information

**see option sheet for more details

Ballast

EB - Electronic (standard)

Dimming4

HL39 - Hi-Lume 3D

ES9 - EcoSystem

ESH - EcoSystem H-Series

0-10V - 0-10V

AM

ARM selections only

CSS

1-1/8”O

3”

1-11/16”

1-11/16”

SOCKET COVER

T5 LAMP

1-11/16” SQUARE EXTRUDEDALUMINUM BALLAST HOUSING


2-1/2”

TOR - IB

V-0117


http://www.birchwoodlighting.com/resources/instr_sheets/tori.html



42



Dimensions | Options

Power Cord Color OptionsW - WhiteB - BlackG - Gray (standard)

Cable Length Options36 - 36” (standard)72 - 72”120 - 120”

Canopy Finish OptionsMW - Matte WhiteSMT - SilverMatteTextureFB - Flat BlackCUP - Custom (contact factory)

Dimensions - IB

SOCKET COVER

T5 LAMP2-1/2”


1-1/8”O

TOR - IB - AM


Cover Plate ColorSC - Satin Clear (standard)CUP - Custom Powder Coat

Cover Plate4CP - 4” Cover Plate (standard)

1TR - 1 1⁄4” Trim Ring

Note: CoverPlatenotavailableforTOR-IB-AMoption 1TRrequiresaccesstobacksideofwall

Arm Mount Options

TOR - RB - CSS - 4CP

CanopySTND - Bracket bar w/5” round canopyNC - No canopy 1⁄4-20sideexitcablegripper (1⁄4-20studprovidedbyothers)CU - Custom (contact factory)


2-5/16”

SOCKET COVER

T5 LAMP


2-1/2”1-1/8”O

TOR - RB - SSM

V-0117

Type: Job Name:




43



Options

ROTATIONAL REFLECTOR

5”3-1/2”

360 360

5”

Mini Rotational Reflector

MRSR-SC/MWMini Rotational Solid Reflector

MRPR-SC/MWMini Rotational Perforated Reflector

Adjustable Asymmetric Reflector

SAAR-SC/MWSolid Adjustable Asymmetric Reflector

PAAR-SC/MWPerforated Adjustable Asymmetric Reflector

Indirect Symmetric Reflector

ISCRS-SC/MWIndirectSymmetricCurvedReflectorSolidwithwhitereflectiveliner

ISCRP-SC/MWIndirect SymmetricCurvedReflectorPerforated

5-3/4”

3-3/4”

5-3/4”

2-1/2”

5-3/4”

3-1/4”

Reflector Options

Acrylic Lens OptionsAcrylic Tube

AT-FCAcrylic Tube Frosted Clear

AT-FWAcrylic Tube Frosted White

Lower Curved Acrylic

LCA-FCLower Curved AcrylicFrosted Clear

LCA-FWLower Curved Acrylic Frosted White

TF Side Acrylic

TFSA-FCTF Side AcrylicFrosted Clear

TFSA-FWTF Side AcrylicFrosted White

Note: SC - Satin ClearMW - Matte White

Note: TF Side Acrylic Remote Ballast only

V-0117


44


ConstructionCurved heavy gauge square extruded aluminum housing, 20 ft. radius. Precision-machined ¼” thick aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.

Mounting Options(SM) Surface Mount or (CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable.

Finishes(SMT) Silver Matte Texture, (MW) Matte White and (FB) Flat Black powder coat finish standard. Consult factory for custom colors.



Fixture LengthFixture is available in 4’ or 8’ nominal lengths and continuous run.

Acrylic Lens(FW) Frosted White extruded acrylic lens.



CHARLOTTE’s sweeping curved square LED profile features multiple distribution and LED options within a 3.25” extruded aluminum housing. Unleash your creativity using broad curves and shapes with the continuous run option or display it as a stand alone luminaire alternating curved sides for dramatic architectural patterns and effects. Frosted White acrylic lenses deliver light efficiently to any interior application or design.

CHARLOTTE offers smooth directional illumination within its curved, streamlined architectural profile. Available in 4’ or 8’ nominal lengths and continuous run.


Made in the USA

V-0417

CHARLOTTE3.25” Direct Distribution

Sweeping Curve LED Fixture

Type: Job Name:




45


SPECIFICATION CODE

Dimensions

V-0417

Voltage

120 277 3471

Driver

EB - Electronic


Lens

FW - Frosted White

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

CHA-DR3.25” Direct Distribution

NOTES1 available for EB, D1, D10 drivers only2 consult factory for EM options3 see CSS options for non-standard selections4 contactfactoryforcustomfinish5 120 volt only6 specify length in 4’ nominal increments, not recommended for complete circle installations

CHARLOTTE3.25” Direct Distribution


Fixture Performance

LightEngine


CLO Calculator

CHA-DR 8’ (4000K FW lens)


DRIVER

VARIOUS LENS


3 1/4” 3 1/4”

3 1/4”

LIGHT ENGINE

5 1/2”

DRIVER

LIGHT ENGINE

LIGHT ENGINE


VARIOUS LENS

VARIOUS LENS

Mounting

CSS - Cable Suspended Direct

SM - Surface Mount

7-3/4”4-1/2” OC

93 - 7/8” O.A.L.

93”Cable Center

3-1/4”R20’

4-3/8” 1-1/4” OC

47-5/8” O.A.L.

47- 1/16 Cable Center

3-1/4”

R20’

8’ STAND ALONE

4’ STAND ALONE

3rd Cable Supportfor CSS Version


Power FeedCSS Only

Power FeedCSS Only

Top View

Profile



Canopy FinishMW - Matte White (standard)SMT - SilverMatteTextureFB - Flat BlackCUP - Custom (contact factory)


CSS Options

model light color length finish lens voltage driver mounting standard standard standard standard options options engine temp cablelength cordcolor canopy canopyfinish


Options



Finish

Powder CoatSMT - Silver MatteTextureMW - Matte WhiteFB - Flat BlackCUP - Custom4

NominalLength

4 - 4’8 - 8’

CR_6

Continuous Run

CHA-DR





46


ConstructionCurved heavy gauge square extruded aluminum housing, 20 ft. radius. Precision-machined ¼” thick aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.

Mounting Options(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable.

Finishes(SMT) Silver Matte Texture, (MW) Matte White and (FB) Flat Black powder coat finish standard. Consult factory for custom colors.

Acrylic Lens(FW) Frosted White extruded acrylic lens.



Fixture LengthFixture is available in 4’ or 8’ nominal lengths and continuous run.



CHARLOTTE’s sweeping curved square LED profile features multiple distribution and LED options within a 3.25” extruded aluminum housing. Unleash your creativity using broad curves and shapes with the continuous run option or display it as a stand alone luminaire alternating curved sides for dramatic architectural patterns and effects. Frosted White acrylic lenses deliver light efficiently to any interior application or design.

CHARLOTTE offers smooth directional illumination within its curved, streamlined architectural profile. 2-Circuit (2CKT) switching capability is optional for lighting the ceiling or work plane. Available in 4’ or 8’ nominal lengths and continuous run.


Made in the USA

V-0417

CHARLOTTE3.25” Direct/Indirect Distribution


Type: Job Name:




47


SPECIFICATION CODE

Dimensions

V-0417

Model

CHA-DR/IN3.25” Direct/IndirectDistribution

NOTES1 available for EB, D1, D10 drivers only2 consult factory for EM options3 consultfactoryforcustomfinish4 120 volt only5 specify length in 4’ nominal increments, not recommended for complete circle installations6 2CKT offers independant circuiting for direct and indirect with a shared neutral 7 see CSS Options for non-standard selections

CHARLOTTE3.25” Direct/Indirect Distribution


Fixture Performance

CHA-1DR/1IN 8’ (4000K FW lens)SLO - 89.4lm/[email protected]/ftfixture input watts, 768 lm/ft.HLO-84lm/wattdelivered@18w/ftfixtureinputwatts, 1512 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

DRIVER

VARIOUS LENS


3 1/4” 3 1/4”

3 1/4”

LIGHT ENGINE

5 1/2”

DRIVER

LIGHT ENGINE

LIGHT ENGINE


VARIOUS LENS

VARIOUS LENS

8” 4-11/16” OC

95 - 1/4” O. A. L.

94-3/8”Cable Center

3-1/4”

4-1/2” 1-1/4” OC

49 - 1/16” O. A. L.

48-1/2Cable Center

3-1/4”

R20’

8’ STAND ALONE

4’ STAND ALONE



R20’

Power FeedCSS Only

Power FeedCSS Only

Top ViewProfile

Mounting


Finish

Powder CoatSMT - Silver Matte TextureMW - Matte WhiteFB - FlatBlackCUP - Custom3

Voltage

120 277 3471

LensDirect

FW -FrostedWhite

LensIndirect

FW -FrostedWhite

Configuration




ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

DirectLightEngine

SLO - Standard Lumen OutputHLO - High Lumen OutputCLO1 - Custom LumenOutput

Driver

EB - Electronic


IndirectLightEngine


model configuration direct indirect color length finish lens lens voltage driver mounting light light temp direct indirect engine engine



CSS

standard standard standard standard option cable cord color canopy canopy length finish

Options

2CKT6 - 2 Circuit







CSS Options

NominalLength

4 - 4’8 - 8’

CR_5

Continuous Run

CLO Calculator

CHA-DR/IN

CHA-1DR/0IN 8’ (4000K FW lens)SLO - 90.8lm/[email protected]/ftfixture input watts, 400 lm/ft.HLO-85.4lm/wattdelivered@10w/ftfixtureinputwatts, 769 lm/ft.CLO - refer to CLO Calculator325 LED supplement info







48


ConstructionAluminum housing 6” tall with a 3.25” profile. Single piece seamless frosted white acrylic lens.

Mounting Options(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable. (SM) Surface Mount.

FinishesFine textured powder coat finish in (SMT) Silver Matte Texture, (WMT) White Matte Texture and (BMT) Black Matte Texture standard. Consult factory for custom colors.

Fixture DiameterFixture is available in nominal 2’ or 4’ diameters, measured to center line of lens.





Our circular direct/indirect luminaire, KATRINA offers elegant architecturally pleasing design while delivering efficient and even light distribution. Single piece seamless frosted white acrylic lens, aluminum housing, integral driver and multiple LED color temperatures and custom lumen output.

Suspended Horizontally with aircraft-cable and offering optional direct and indirect switching capability, KATRINA produces dual continuous rings of light from a 5⁄8” extended lens from a 6” tall housing. Available in both nominal 2’ and 4’ diameters.


Made in the USA

V-0816

KATRINADirect/Indirect Distribution

Circular Dual Distribution Luminaire

Type: Job Name:




49


SPECIFICATION CODE

Dimensions

V-0816

Model

KAT-DR/INDirect/IndirectDistribution

KAT-DRDirectDistributionOnly

NOTES1 available for EB, D1, D10 drivers only2 consult factory for EM options3 consult factory for custom powder coat4 SM only valid for KAT-DR5 Leave blank for KAT-DR option6 see CSS options for non-standard selections

KATRINADirect/Indirect Distribution

Circular Dual Distribution Luminaire

Fixture Performance

KAT-DR/IN-2’ (4000K)

SLO - 6,071 lm @ 64 wattsHLO - 11,622 lm @ 132 wattsCLO - refer to CLO Calculator325 LED supplement info

Mounting

CSS6 - Cable Suspended

SM4 - Surface Mount

Finish

Powder CoatSMT - Silver Matte TextureBMT - Black Matte TextureWMT - White Matte TextureCUP - Custom3

Voltage

120 277 3471

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

DirectLightEngine

SLO - Standard Lumen OutputHLO - High Lumen OutputCLO1 - Custom LumenOutput

Driver

EB - Electronic

DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10V

IndirectLightEngine5


model direct indirect color diameter finish voltage driver mounting light light temp engine engine



CSS


Options

2CKT - 2 Circuit

EM2 - Remote Inverter




Canopy FinishCanopySTND - Bracket bar w/5” round canopyNC - Nocanopy1/4-20sideexitcablegripper (1/4-20 stud provided by others)CU - Custom (contact factory)

CSS Options

NominalDiameter

2 - 2’4 - 4’

CLO Calculator

KAT-DR-2’ (4000K)


KAT-DR/IN-4’ (4000K)


KAT-DR-4’ (4000K)

SLO - 6,258 lm @ 64 wattsHLO - 11,980 lm @ 132wattsCLO - refer to CLO Calculator325 LED supplement info

2’ 4’27-3/8” 51-3/8”

6”overall

4-3/16”overall

DR/IN DR

(DeliveredLumensandFixtureInputWattage)

MW - Matte White (standard)SMT - SilverMatteTextureFB - Flat BlackCUP - Custom (contact factory)











50


ConstructionInternal housing is heavy gauge extruded aluminum. Fixture shapes are fabricated of formed .050 aluminum with linear cut slots. End caps are 1⁄4” thick precision-machined aluminum. Lenses are extruded acrylic.

Mounting OptionsField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord are included as standard. (SM) Surface Mount also available.

Acrylic Lens Options(FW) Frosted White or (FT) Prismatic Sided Frosted White.



Finishes(SC) Satin Clear anodize is standard for internal housing. Fixture shapes are powder coat paint finish colors: (MW) Matte White, (FB) Flat Black, (SL) Silver, and (GR) Gloss Red. Custom finishes available for fixture body and shapes - consult factory for options.

Shape Styles(CE) Curved Edge, or (AE) Angled Edge.

(R) Reveal design features angled or curved cut out openings in upper area of fixture to expose extrusion. Cut out is angled to compliment the fixture edge shape, and reveal the internal housing. Direct illumination is delivered through the flush lens at the bottom of the fixture.

(S) Slotted design features 2 or 3 rows of slot-shaped cut outs on both sides of the fixture shape and end caps which allow illumination to shine through the underlying tri-side lens. 2 slot option measures approximately ¼”(height) per opening. 3 slot option measures approximately 1⁄8” (height) per opening.


Fascinating in form, eclectic in design, STELLA represents the best of both while providing beautiful illumination and overall efficiency within a world of imaginative lighting possibilities. STELLA’s design capabilities are easily imagined by simply selecting the Fixture Shape and Fixture Accent options. Fixture Shape is either Curved Edge (CE) or Angled Edge (AE) and Accented with either Reveal (R ) or Slotted (S) cut-outs. Accents are designed to deliver light through either a tri-side lens (Slotted) or flush lens (Reveal). To further enhance the texture, dimensions and layers of this ever-versatile luminaire add color to STELLA’s Fixture Shape and internal housing. STELLA is a cable suspended and surface mount luminaire available in 4’ and 8’ stand-alone lengths with integral electronic ballast. Available with LED or fluorescent lamp sources.


STELLA LEDDesigner ShapesDistributed Array LED

CSS | SM

Made in the USA

V-0417

Type: Job Name:




51


STELLA LEDDesigner ShapesDistributed Array LED

CSS | SM

SPECIFICATION CODE

FixtureShape

AE-R - Angled Edge RevealAE-S - Angled Edge SlottedCE-R - Curved Edge RevealCE-S - Curved Edge Slotted

Nominal Length

4 - 4’8 - 8’

Lens

FW -FrostedWhite

FT3 - Prismatic Sided Frosted White

Voltage

120277

3471

ColorTemp

27 - 2700K 30 - 3000K35 - 3500K40 - 4000K

model fixture light color length fixture housing lens voltage driver mounting cable cord canopy canopy shape engine temp finish finish length color finish

Driver



Model

STE-LED-3253.25”squarefixture

NOTES1 available for EB, D1, D10 drivers only2 contactfactoryforcustomfinish3 only available on CE-S and AE-S shapes4 see CSS Options for non standard selections 5 fixturefinishisforexteriorfixtureshape selection (AE-R, AE-S, CE-R, CE-S)6 120V only

InternalHousingFinish



V-0417

FixtureFinish5

Powder CoatMW - Matte WhiteFB - Flat BlackGR - Gloss RedSL - Silver

CUP - Custom2

Mounting

CSS - CableSuspended

SM - SurfaceMount

Fixture Shape Styles and Dimensions

3.75

45 degree

45 degree

3.75

3.75

3.75

1/4” slots

1/8” slots

AE-S

AE-R

CE-S

CE-R

CSS selections only





CSS Options

Options


Internal Housing

FixtureShape/Finish

DRIVER

VARIOUS LENS


3.375”

3.75”

FIXTURE SHAPE

L9LRor L9LR-H

LED

LightEngine


CLO Calculator

AE-R or CE-R (4000K FW lens)

SLO - 89.4lm/[email protected]/ftfixtureinputwatts, 393 lm/ft.HLO-84lm/wattdelivered@9w/ftfixtureinputwatts, 756 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

AE-S or CE-S (4000K FW lens)

SLO - 101.1lm/[email protected]/ftfixtureinputwatts, 445 lm/ft.HLO-95lm/wattdelivered@9w/ftfixtureinputwatts, 856 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

STE-LED-325







52


ConstructionInternal housing is heavy gauge extruded aluminum. Fixture shapes are fabricated of formed .050 aluminum with linear cut slots. End caps are 1⁄4” thick precision-machined aluminum. Lenses are extruded acrylic.

Mounting OptionsField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord are included as standard. (SM) Surface Mount also available.

Acrylic Lens Options(FW) Frosted White or (FT) Prismatic Sided Frosted White.

Lamping OptionsT5, T5HO or T8 linear fluorescent. Integral electronic ballast is standard. Dimming ballasts and (EM) Emergency battery pack options are available, consult factory for compatibility.

Finishes(SC) Satin Clear anodize is standard for internal housing. Fixture shapes are powder coat paint finish colors: (MW) Matte White, (FB) Flat Black (SL) Silver, and (GR) Gloss Red. Custom finishes available for fixture body and shapes - consult factory for options.

Shape Styles(CE) Curved Edge, or (AE) Angled Edge.

(R) Reveal design features angled or curved cut out openings in upper area of fixture to expose extrusion. Cut out is angled to compliment the fixture edge shape, and reveal the internal housing. Direct illumination is delivered through the flush lens at the bottom of the fixture.

(S) Slotted design features 2 or 3 rows of slot-shaped cut outs on both sides of the fixture shape which allow illumination to shine through the underlying tri-side lens. 2 slot option measures approximately ¼”(height) per opening. 3 slot option measures approximately 1⁄8” (height) per opening.


Fascinating in form, eclectic in design, STELLA represents the best of both while providing beautiful illumination and overall efficiency within a world of imaginative lighting possibilities. STELLA’s design capabilities are easily imagined by simply selecting the Fixture Shape and Fixture Accent options. Fixture Shape is either Curved Edge (CE) or Angled Edge (AE) and Accented with either Reveal (R ) or Slotted (S) cut-outs. Accents are designed to deliver light through either a tri-side lens (Slotted) or flush lens (Reveal). To further enhance the texture, dimensions and layers of this ever-versatile luminaire add color to STELLA’s Fixture Shape and internal housing. STELLA is a cable suspended and surface mount luminaire available in 4’ and 8’ stand-alone lengths with integral electronic ballast. Available with LED or fluorescent lamp sources.

UL and c-UL listed for dry locations.

STELLADesigner ShapesLinear Fluorescent

CSS | SM

Made in the USA

V-1215

Type: Job Name:




53


STELLADesigner ShapesLinear Fluorescent

CSS | SM

SPECIFICATION CODE

Nominal Length

4 - 4’85 - 8’

Model

STE-325-13.25”squarefixture1 lamp in cross section

NOTES1 contactfactoryforcustomfinish2 only available with AE-S or CE-S shapes3 see CSS Options for non standard selections4 fixturefinishisexteriorfixtureshapeselection (AE-R, AE-S, CE-R, CE-S)5 lamps are staggered to reduce socket shadow6 for CSS with ES or HL3 option, ballast is wired at factory for 3-wire control for digital dimming control (E1/E2), consult factory

Internal HousingFinish



V-1215

LampType

T5T5HOT8

Ballast

EB - Electronic(standard)DimmingHL36 - Hi-Lume 3DES6 - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Fixture Shape Styles and Dimensions

3.75

45 degree

45 degree

3.75

3.75

3.75

1/4” slots

1/8” slots

AE-S

AE-R

CE-S

CE-R

FixtureShape

AE-R - Angled Edge RevealAE-S - Angled Edge SlottedCE-R - Curved Edge RevealCE-S - Curved Edge Slotted

Lens

FW - Frosted White

FT2 - Prismatic Sided Frosted White

Voltage

120277

FixtureFinish4

Powder CoatMW - Matte WhiteFB - Flat BlackGR - Gloss RedSL - Silver

CUP - Custom1

Mounting


SM - SurfaceMount

Options


model fixture lamp length fixture internal lens voltage ballast mounting cable cord canopy canopy shape finish housing length color finish finish

CSS selections only





CSS Options

Internal Housing

FixtureShape/Finish

INTEGRAL BALLAST

OPTIMIZED REFLECTOR

1 T5, OR T8


3.375”

3.75”

FIXTURE SHAPE

STE-325-1


54



ERIKA LEDDynamic GeometricsSquare/Rectangle

CSS | SM

Made in the USA

V-0417

ERI-325S-TRI ERI-325S-FW

ConstructionHeavy gauge square extruded aluminum housing. Extruded acrylic lenses specifically engineered to maximize the performance and transmission from a variety of light sources.

Mounting OptionsField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord are included as standard. For horizontal mounting orientation only. (SM) Surface Mount for ceiling or wall.

Finishes(SC) Satin Clear anodize is standard finish. Other powder coat finishes available. Consult factory for options.

LED Light Engine SystemLED Light Engines are available as HLO (High Lumen Output) and SLO (Standard Lumen Output) providing efficient illumination. CLO (Custom Lumen Output) allows for end user specified lumen output or tailored wattage consumption for certain models.


Acrylic Lens Style(FW) Flush Frosted White lens, (RLW) Reveal Frosted White lens with 3/8” extension. (TRI) Tri-side Lens (Tri-side lens available with 2.25” and 3.25” only).



Offering show-stopping elegance within a dynamic geometric shape and profile, ERIKA creates a sensational impression in any interior application.

Horizontally cable-suspended, ERIKA’s lean and modern design can be specified in either square or rectangular shapes of 1.25”, 2.25” or 3.25” mitered extruded aluminum. Extruded frosted acrylic lenses in Flush, Reveal or Symmetrical Tri-side version, while integral dimming and battery pack options are also available for added lighting versatility.

Available with standard and custom lumen LED sources. Select Satin Clear (anodized), or Matte White or Flat Black (powder coat paint) as standard finishes. Custom finish options are also available.

ERI-125R

ERI-125S

ERI-325S-RLW

Type: Job Name:




55



CSS | SM

V-0417

LED

125-FW (4000K FW lens)

SLO - 95.5lm/[email protected]/ftfixtureinputwatts, 283 lm/ft. HLO-95.0lm/[email protected]/ftfixtureinputwatts,565lm/ft.CLO - refer to CLO Calculator125 LED supplement info

125-R-FW (4000K FW lens)



SLO - 100.5lm/[email protected]/ftfixtureinputwatts, 292 lm/ft.HLO-98.7lm/[email protected]/ftfixtureinputwatts, 583 lm/ft. CLO - refer to CLO Calculator225 LED supplement info

225-TRI (4000K FW lens)

SLO - 120.4lm/[email protected]/ftfixtureinputwatts, 349 lm/ft.HLO-118.2lm/[email protected]/ftfixtureinputwatts, 698 lm/ft. CLO - refer to CLO Calculator225 LED supplement info


SLO - 90.8lm/[email protected]/ftfixtureinputwatts, 400 lm/ft.HLO-85.4lm/wattdelivered@9w/ftfixtureinputwatts, 769 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

325-TRI (4000K FW lens)

SLO - 111.4lm/[email protected]/ftfixtureinputwatts, 490 lm/ft.HLO-104.7lm/[email protected]/ftfixtureinputwatts, 942 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

SPECIFICATION CODE

Nominal Length

2X2-2’square3X3-3’square4X4-4’square

Rectangle2X3-2’x3’2X4-2’x4’3X4-3’x4’

__x__ -Custom size3

Voltage

120277

3471

model lightengine color lens length finish voltage driver mounting cable cord canopy canopy temp style length color finish

Driver


DimmingD1 - 1% (nom)0-10VD10 - 10% 0-10VHLA25 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

Model

ERI-LED-125S 1.25”squareprofilefixture

ERI-LED-125R7 1.25” round profilefixture



NOTES1 available for EB, D1, D10 drivers only2 TRI lens available with 225 and 325 only3 contact factory for custom rectangle4 contactfactoryforcustomfinish5 120V only6 see CSS options for non standard selections7 not available with TRI or RLW lens style

Finish



Options

Cable Length6

Cord Color6 Canopy6 Canopy Finish6

Mounting

SM - SurfaceMount




Canopy FinishMW - Matte White (standard)SL - SilverFB - Flat BlackCUP - Custom (contact factory)


CSS Options

CSS

LensStyle

FW - Flush LensFrosted White


TRI -2 Tri-Side1-1/2”extended

CSS selections only

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

LightEngine


CLO Calculator

ERI-LED-

TRI - TRI-SIDE LENS (225, 325 only)

1 3/4” Housing

1 1/2” Lens

FW - FLUSH LENS

1-1/4”

1-1/4”

REVEAL LENS 3/8”



DRIVER

STANDARD FLUSH LENSor FBLSS WITH

DIFFUSING LAYER


3 1/4”

3 1/4”

3 1/4”

3 1/4” 3 1/4”

TRI - SIDE LENS

D1/D10 DRIVERLUTRON IS REMOTE


2 1/4”

2 1/4”

2 1/4”

LIGHT ENGINE

LIGHT ENGINE

3/8”

REVEAL LENS 3/8”

3/8”

3/8”

FW LENS

RLW - REVEAL LENS

3/8” Lens

1”

1 1/4”

FW LENS ONLY

125S-FW or RLW 125R-FW

225S-FW or RLW325S-FW or RLW

225S-TRI325S-TRI

1 3/4”

1 1/2”

1 3/4”

1 1/2”















56



CSS | SM

Dimensions

TRI - TRI-SIDE LENS (225, 325 only)

1 3/4” Housing

1 1/2” Lens

FW - FLUSH LENS

1-1/4”

1-1/4”

REVEAL LENS 3/8”



DRIVER

STANDARD FLUSH LENSor FBLSS WITH

DIFFUSING LAYER


3 1/4”

3 1/4”

3 1/4”

3 1/4” 3 1/4”

TRI - SIDE LENS

D1/D10 DRIVERLUTRON IS REMOTE


2 1/4”

2 1/4”

2 1/4”

LIGHT ENGINE

LIGHT ENGINE

3/8”

REVEAL LENS 3/8”

3/8”

3/8”

FW LENS

RLW - REVEAL LENS

3/8” Lens

1”

1 1/4”

FW LENS ONLY

125S-FW or RLW 125R-FW

225S-FW or RLW325S-FW or RLW

225S-TRI325S-TRI

1 3/4”

1 1/2”

1 3/4”

1 1/2”

Type: Job Name:




57



CSS | SM


58



ERIKA LEDDirect/IndirectSquare/Rectangle

CSS

Made in the USA

V-0617

ConstructionHeavy gauge square extruded aluminum housing. Extruded acrylic lenses specifically engineered to maximize the performance and transmission from a variety of light sources.

Mounting OptionsField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device. 36” aircraft cable and (G) Gray power cord are included as standard. For horizontal mounting orientation only.

Finishes(SC) Satin Clear anodize is standard finish. Other powder coat finishes available. Consult factory for options.



Acrylic Lens Style(FW) Flush Frosted White lens, (RLW) Reveal Frosted White lens with 3/8” extension.



Offering show-stopping elegance within a dynamic geometric shape and profile, ERIKA creates a sensational impression in any interior application.

Horizontally cable-suspended, ERIKA’s lean and modern design can be specified in either square or rectangular shapes of 1.25”, 2.25” or 3.25” mitered extruded aluminum. Extruded acrylic lenses in Flush or Reveal version, while integral dimming and battery pack options are also available for added lighting versatility.

Available with standard and custom lumen LED sources. Select Satin Clear (anodized), or Matte White or Flat Black (powder coat paint) as standard finishes. Custom finish options are also available.

ERI-DR/IN-225 Flush Lens

Type: Job Name:




59



CSS

V-0617

SPECIFICATION CODE

model configuration direct indirect color length finish lens lens voltage driver light light temp direct indirect engine engine


Model

ERI-LED-DR/IN-125S6

1.25” Direct/ Indirect

ERI-LED-DR/IN-225S2.25” Direct/ Indirect

ERI-LED-DR/IN-325S3.25” Direct/ Indirect

Finish



Voltage

120 277 3474

NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 see options below for non-standard selections4 available for EB, D1, D10 drivers only5 120V only6 driver is remote




Canopy FinishMW - Matte WhiteSmt - SilverMatteTextureFB - Flat BlackCUP - Custom (contact factory)


CSS Options

CSS Options


LensDirect



LensIndirect



CSS

Configuration

1DR-1IN - 1 light source direct/1 indirect

1DR-0IN - 1 light sorce direct/0 indirect


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

DirectLightEngine


CLO Calculator

Driver

EB - Electronic


IndirectLightEngine



Options



ERI-LED-DR/IN

LED

125 (4000K FW lens) 60% Indirect / 40% Direct

SLO-SLO - 71.7lm/[email protected]/ftfixtureinputwatts,249lm/ft.Indirect, 166 lm/ft. DirectHLO-HLO-70.5lm/[email protected]/ftfixtureinputwatts,499lm/ft.Indirect, 333 lm/ft. DirectCLO-CLO - refer to CLO Calculator


225 8’ (4000K FW lens) 1DR-1IN*

SLO-SLO - 99.6lm/[email protected]/ftfixtureinputwatts,878lm/ft.HLO-HLO-93.6lm/wattdelivered@18w/ftfixtureinputwatts,1686lm/ft.CLO-CLO - refer to CLO Calculator225 LED supplement info

325 8’ (4000K FW lens) 1DR-1IN*

SLO-SLO - 89.4lm/[email protected]/ftfixtureinputwatts,786lm/ft.HLO-HLO-84lm/wattdelivered@18w/ftfixtureinputwatts,1512lm/ft.CLO-CLO - refer to CLO Calculator325 LED supplement info

* For 1DR-0IN divide lm/ft and w/ft data by 2

Nominal Length

2X2-2’square3X3-3’square4X4-4’square

Rectangle2X3-2’x3’2X4-2’x4’3X4-3’x4’

__x__ -Custom size3











60



CSS

Dimensions

LED MODULE


DRIVER

5-1/8"

2-1/4"

LED MODULE



225


3/8”

LED MODULE


2-3/4"

1-1/4"

LED MODULE


125


3/8”

COL-CSS-RLW

3/8”

3/8”

5-1/2"

3-1/4"

325

3/8”

3/8”

LED MODULE


DRIVER

LED MODULE



REVEAL LENS 3/8”

LED MODULE


DRIVER

5-1/8"

2-1/4"

LED MODULE



225


3/8”

LED MODULE


2-3/4"

1-1/4"

LED MODULE


125


3/8”

COL-CSS-RLW

3/8”

3/8”

5-1/2"

3-1/4"

325

3/8”

3/8”

LED MODULE


DRIVER

LED MODULE



REVEAL LENS 3/8”

RLW Lens Dimensions


61


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, and 8 feet, and continuous run lengths. Lenses are extruded acrylic.

Lamping and BallastT5, T5HO or T8 linear fluorescent. Integral (EB) electronic ballast standard. Dimming ballast and (EM) Emergency battery pack optional. Consult factory for ballast and emergency battery pack compatibility, specifications and selection. Lamps and ballast are accessible from below the ceiling.

FinishesTrim (TR) is standard Satin Clear (SC) anodized. Trimless (TL) is standard Mill finish. Custom powder coat finishes available - consult factory.

MountingRecessed linear fixture for drywall or wood installations, or for mounting on the wall on a vertical plane. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting options available for ease of installation.

OptionsDimming ballast, (EM) Emergency battery pack. Consult factory for compatibility, specifications and selection. (FBLSS) Flat Blade Louver Semi-Specular. 90º corner angles for transverse-run applications: from wall to ceiling Inside Corner (IC90), Outside Corner (OC90), and Face surface (F90). Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.


JAKE is a recessed linear luminaire comprised of various apertures, lamp selections and accessory options. JAKE 1.65”, 2.25” and 3.25” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

Offering various installation orientations from wall to ceiling, or along the wall, JAKE qualifies as one of our most versatile fixtures yet. Optional 90º mitered angles allow the creation of endless transverse runs: Inside Corner wall to ceiling (IC90), Outside Corner (OC90), or Face surface (F90). JAKE’s accessory options are designed to fit your most sophisticated lighting applications via lenses, louvers, and distinctive finishes.

Compatible with T5, T5HO and T8 fluorescent lamps.

JAKE1.65” 2.25” 3.25” Trim/TrimlessT5/T5HO/T8

Recessed Linear Fluorescent Fixture

V-1016


Made in the USA

Type: Job Name:




62


1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-15/16”

3-3/4”

3/4” 3-1/8”

3-15/16”4-7/8”

3-3/4”

1-5/8”

2-1/8”

3-15/16”

2-3/4”

3/4” 2-1/8”

3-15/16”

2-3/4”

1-5/8”

165

225

325

(TR) (TL)

1-5/8”

4-7/8”

2-1/4”

3-1/8”

3-3/4”

2-1/8”

2-3/4”

(T-Grid)

4-7/8”

Model

JAK-165 -1.65” aperture


JAK-325-13.25” aperture1 lamp in cross section

JAK-325-23.25” aperture2 lamp incross section

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 3

8 - 8’ 3

CR_1

Continuous Run

MTR-R6

Miter RunMTR-REC6

Miter Rectangle

Voltage

120 277

Ballast

EB - Electronic


SPECIFICATION CODE

model trim style lamp type length lens voltage ballast options options

Dimensions

Lamp Type

T5T5HO5

T87

V-1016

Lens

FW - Frosted White


Trim Style2

TR-3/4”flangedtrim

TL - TrimlessMud-overflange

JAKE1.65” 2.25” 3.25” Trim/TrimlessT5/T5HO/T8


NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. see option sheetforcustomfinishes3 staggered lamping for 6’ and longer for 325 (165 and 225 lamps are end to end)4 FBLSS available for 225 and 3255 (2) T5HO lamps not available with lens option 6 see miter worksheetforspecification (must provide detailed drawing for order) 7 not available in 1658 see instruction sheet for mounting info9 consult factory for EM options10compliantwithCCEAChicagoPlenumcoderequirements

Options

EM9 - Emergencybattery pack

CP10 - Chicago Plenum

Trim Finishes2

FB - Flat BlackMW - Matte WhiteCUP - Custom powder coat

Mounting Options8

OHMB - Overhead Mounting BracketBF - Backer FlangeHB - Hanger Bracket


http://www.birchwoodlighting.com/downloads/miter_options.pdf

http://www.birchwoodlighting.com/resources/instr_sheets/jake.html


63


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, and 8 feet, and continuous run lengths. Lenses are extruded acrylic.

Lamping and BallastT5, T5HO or T8 linear fluorescent. Integral (EB) electronic ballast standard. Dimming ballast and (EM) Emergency battery pack optional. Consult factory for ballast and emergency battery pack compatibility, specifications and selection. Lamps and ballast are accessible from below the ceiling.

FinishesFixture exposed edges are standard Matte White (MW). Custom powder coat finishes available - consult factory.

MountingRecessed linear fixture for T-Grid ceiling installations. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting options available for ease of installation.

OptionsDimming ballast, (EM) Emergency battery pack. Consult factory for compatibility, specifications and selection. (FBLSS) Flat Blade Louver Semi-Specular. 90º corner angles for transverse-run applications: from wall to ceiling Inside Corner (IC90), Outside Corner (OC90), and Face surface (F90). Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.


JAKE is a recessed linear luminaire comprised of various apertures, lamp selections and accessory options. JAKE 1.65”, 2.25” and 3.25” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

Offering various installation orientations from wall to ceiling, or along the wall, JAKE qualifies as one of our most versatile fixtures yet. Optional 90º mitered angles allow the creation of endless transverse runs: Inside Corner wall to ceiling (IC90), Outside Corner (OC90), or Face surface (F90). JAKE’s accessory options are designed to fit your most sophisticated lighting applications via lenses, louvers, and distinctive finishes.

Compatible with T5, T5HO and T8 fluorescent lamps.

JAKE1.65” 2.25” 3.25” T-GridT5/T5HO/T8


V-0217


Made in the USA

Type: Job Name:




64


1-5/8”

3-15/16”

2-1/4”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-15/16”

3-3/4”

3/4” 3-1/8”

3-15/16” 3-15/16”

3-3/4” 3-3/4”

1-5/8”

2-1/8”

3-15/16”

2-3/4”

3/4” 2-1/8”

3-15/16” 3-15/16”

2-3/4”

1-5/8”

165

225

325

(TR) (TL)

1-5/8”

3-1/8”

2-1/8”

(T-Grid)

2-3/4”

Model





JAK-4TZ-1 11

3.25” aperture in 4” Armstrong® TechZone®

1 lamp in cross section

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 3

8 - 8’ 3

CR_1

Continuous Run

MTR-R7

Miter RunMTR-REC7

Miter Rectangle

Voltage

120 277

Ballast

EB - Electronic


SPECIFICATION CODE

model trim style lamp type length lens voltage ballast options options

Dimensions

Lamp Type

T5T5HO5

T89

Lens

FW - Frosted White


Trim Style2

T-Grid Ceilings 6,8

LT9- 9/16”exposedlay-inLT15-15/16”exposedlay-inTT9 - 9/16” TegularTT15 -15/16” TegularITA - Interlude®

ST9 - Slot Grid

JAKE1.65” 2.25” 3.25” T-GridT5/T5HO/T8


NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes3 staggered lamping for 6’ and longer for 325 (165 and 225 lamps are end to end)4 FBLSS available for 225 and 3255 (2) T5HO lamps not available with lens option6 see T-Grid sheet for more details7 see miter worksheetforspecification (must provide detailed drawing for order)8 2’ and 4’ standalone T8 and 2T8 not available with T-Grid options9 not available in 16510 consult factory for EM options11 JAK-4TZ only available with 9/16” trim style12compliantwithCCEAChicagoPlenumcoderequirements

Options



Trim Finishes2

CUP - Custom powder coat

165

225

325

V-0217


http://www.birchwoodlighting.com/downloads/t-grid.pdf



65


JAKE1.65” 2.25” 3.25” T-GridT5/T5HO/T8


V-1016

ST9 - 9/16 SLOT GRID

TT9 - 9/16 TEGULARLT9 - 9/16 LAY-IN

LT15 - 15/16 LAY-IN TT15 - 15/16 TEGULAR

ITA - Interlude

6TZ9 - 9/16 Techzone 6TZ15 - 15/16 Techzone

T-GRID TRIM STYLES

Type: Job Name:




66



67


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet, and continuous run lengths. Lenses are extruded acrylic.

MountingRecessed linear fixture for drywall or wood ceiling installations, or for mounting on the wall on a vertical plane. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips provided for ease of installation.


Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications. FinishesTrim (TR) is standard Satin Clear (SC) anodized. Custom powder coat finishes available - consult factory.

Options(FBLSS) Flat Blade Louver Semi-Specular. 90º corner angles for transverse-run applications: from wall to ceiling Inside Corner (IC90), Outside Corner (OC90), and Face surface (F90). Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.


JAKE LED is a recessed linear luminaire comprised of various apertures, LED light source options and accessory options. JAKE LED 1.65”, 2.25”, 3.25” and 5.00” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange.T-grid models for drop ceilings are also available.

Offering various installations from wall to ceiling, or along the wall, JAKE LED qualifies as one of our most versatile fixtures yet. Optional 90º mitered angles allow the creation of endless transverse runs: Inside Corner wall to ceiling (IC90), Outside Corner (OC90), or Face surface (F90). JAKE LED accessory options are designed to fit your most sophisticated lighting applications via lenses, louvers, and distinctive finishes.

JAKE LED Light Engines and dimmable driver components which combined together provide optimal LED lighting system capabilities.

JAKE LED1.65” 2.25” 3.25” 5.00” Trim/Trimless

Recessed Linear LED Fixture

V-0417


Made in the USA

Type: Job Name:




68


SPECIFICATION CODE

model trim style light engine color temp length lens voltage driver option option

Dimensions

Voltage

120 277 3478

Driver

EB - Electronic


Lens

FW - Frosted White


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

JAK-LED-165 -1.65” aperture




Trim Style2

TR - 3/4” flangedtrim

TL - Trimless Mud-overflange

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

MTR-R4

Miter RunMTR-REC4

Miter Rectangle

Options



Finishes2


Mounting Options5


NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, T-Grid standard is Matte White, TL standard is Mill Finish. See option sheetforcustomfinishes3 FBLS available for 225 and 3254 see miter worksheetforspecification (must provide detailed drawing for order)5 see instruction sheet for mounting info6 120V only7 consult factory for EM options8 available for EB, D1, D10 drivers only9 JAK-LED-500 not available in 2700K color temp10compliantwithCCEAChicagoPlenumcoderequirements

JAKE LED1.65” 2.25” 3.25” 5.00” Trim/Trimless


1-5/8”

3-15/16”

2-1/4”

3/4”

3-1/8”

3-15/16”

3-3/4”

3/4”

2-1/8”

3-15/16”

2-3/4”

3/4”

(TR)

1-5/8” 1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-1/8” 3-1/8”

3-15/16”

3-3/4”

1-5/8”

2-1/8”

3-15/16”

2-3/4”

1-5/8”

165

225

325

(TL) (T-Grid)

4-7/8”

2-1/4”

3-3/4”

2-3/4”

4-7/8”

4-7/8”

2-1/8”

3-15/16”

5.0” nom. 5.0” nom.

3/4”

3-15/16”

1-5/8”

500 5.0” nom.

4-7/8”

4-7/8” 4-7/8” 4-7/8”

LED

LightEngine


CLO Calculator

165 (4000K FW lens)


225 (4000K FW lens)


325 (4000K FW lens)


500 (4000K FW lens)


V-0417














69



MountingRecessed linear fixture for T-Grid ceiling installations. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips provided for ease of installation.



Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications. Options(FBLSS) Flat Blade Louver Semi-Specular. 90º corner angles for transverse-run applications: from wall to ceiling Inside Corner (IC90), Outside Corner (OC90), and Face surface (F90).



JAKE LED is a recessed linear luminaire comprised of various apertures, LED light source options and accessory options. JAKE LED T-Grid 1.65”, 2.25”, 3.25” and 5.00” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.



JAKE LED1.65” 2.25” 3.25” 5.00”T-Grid


V-0417


Made in the USA

Type: Job Name:




70


SPECIFICATION CODE


Dimensions

Voltage

120 277 3478

Driver

EB - Electronic


Lens

FW - Frosted White


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model





JAK-LED-4TZ9 -3.25” aperture in 4” Armstrong® TechZone®

JAK-LED-6TZ10 -5.00” aperture in 6” Armstrong® TechZone®

Trim Style2

T-Grid Ceilings4

LT9 - 9/16” exposedlay-inLT15 -15/16” exposedlay-inTT9 - 9/16” TegularTT15 -15/16” TegularITA - Interlude® 9/16”ST9 - Slot Grid 9/16”

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

MTR-R5

Miter RunMTR-REC5

Miter Rectangle

Options



Finishes2


NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes3 FBLS available for 225 and 3254 see T-Grid sheet for more details5 see miter worksheetforspecification (must provide detailed drawing for order)6 120V only7 consult factory for EM options8 available for EB, D1, D10 drivers only9 JAK-LED-4TZ only available with 9/16” trim styles10 JAK-LED-500 not available in 2700K color temp11 compliantwithCCEAChicagoPlenumcoderequirements

JAKE LED1.65” 2.25” 3.25” 5.00”T-Grid


1-5/8”

3-15/16”

2-1/4”

3/4”

3-1/8”

3-15/16”

3-3/4”

3/4”

2-1/8”

3-15/16”

2-3/4”

3/4”

(TR)

1-5/8” 1-5/8”

3-15/16” 3-15/16”

2-1/4” 2-1/4”

1-5/8”

3-1/8” 3-1/8”

3-15/16” 3-15/16”

3-3/4”

1-5/8”

2-1/8”

3-15/16” 3-15/16”

2-3/4”

1-5/8”

165

225

325

(TL) (T-Grid)

3-3/4”

2-1/8”

3-15/16”

5.0” nom. 5.0” nom.

3/4”

3-15/16” 3-15/16”

1-5/8”

500 5.0” nom.

4-7/8” 4-7/8” 4-7/8”

2-3/4”

LightEngine


CLO Calculator

165

225

325

500

V-0417

LED

165 (4000K FW lens)


225 (4000K FW lens)


325 (4000K FW lens)


500 (4000K FW lens)















71


JAKE LED1.65” 2.25” 3.25”T-Grid


V-1016




ITA - Interlude


T-GRID TRIM STYLES

Type: Job Name:




72



73


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2 - 8 feet, and continuous run lengths.

MountingRecessed linear fixture for drywall or wood installations. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips available for ease of installation.






JAKE LED Wall Wash is a recessed linear luminaire comprised of various LED light source options that delivers high performing smooth illumination to the intended area and creating visual interest to the space. JAKE LED Wall Wash can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

JAKE LED Light Engines and dimmable driver components, when combined together, provide optimal LED lighting system capabilities. Optional Kicker Reflector (KR) delivers light to upper corners of wall/ceiling transitions to minimize shadowing.

Available in nominal lengths from 2’ - 8’ as well as continuous run.

V-0417

JAKE LED3.50” Wall WashTrim/Trimless



Made in the USA

Type: Job Name:




74


SPECIFICATION CODE

model trim style light engine color temp length voltage driver option option

Dimensions

Voltage

120 277 3475

Driver

EB - Electronic


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

JAK-LED-WW-350

Trim Style2



Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

Options

Finishes2


Mounting Options3



KR - KickerReflector

NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. See option sheetforcustomfinishes3 see instruction sheet for mounting info4 120V only5 available for EB, D1, D10 drivers only6 compliantwithCCEAChicagoPlenumcoderequirements



Fixture Performance

LightEngine


CLO Calculator

JAK-LED-WW-350 (4000K)


JAK-LED-WW-350

3/4”

3/4”

4 - 1/2”

4 - 1/8”

3 - 5/8”

OptionalKicker

4 - 1/2”

4 - 1/8”

3 - 5/8”

4 - 7/8”

4 - 1/8”

3 - 5/8”1 - 5/8”

3/4” 3/4”OptionalKicker

OptionalKicker

TR TL

V-0417







75


V-1016

Photometrics

With Optional Kicker (KIC)

Gridscale = 1.0 ft per incrementFootcandle Legend

0.5 fc 1.0 fc 2.0 fc 5.0 fc 10.0 fc 20.0 fc


Fixtureismountedat8’heightand2.0’fromthewall Fixtureismountedat8’heightand3.0’fromthewall




Type: Job Name:




76



77



MountingRecessed linear fixture for T-Grid ceiling installations. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips available for ease of installation.






JAKE LED Wall Wash is a recessed linear luminaire comprised of various LED light source options that delivers high performing smooth illumination to the intended area and creating visual interest to the space. JAKE LED Wall Wash can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

JAKE LED Light Engines and dimmable driver components, when combined together, provide optimal LED lighting system capabilities. Optional Kicker Reflector (KR) delivers light to upper corners of wall/ceiling transitions to minimize shadowing.


V-0417

JAKE LED3.50” Wall WashT-Grid



Made in the USA

Type: Job Name:




78


SPECIFICATION CODE


Dimensions

Voltage

120 277 3474

Driver

EB - Electronic


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

JAK-LED-WW-350

Trim Style2

T-Grid CeilingsLT9 - 9/16” exposedlay-inLT15 - 15/16” exposedlay-inTT9 - 9/16” TegularTT15 - 15/16” TegularITA - Interlude®

ST9 - Slot Grid

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

Options

Finishes2



KR - KickerReflector

NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite see option sheetforcustomfinishes3 120V only4 available for EB, D1, D10 drivers only5 compliantwithCCEAChicagoPlenumcoderequirements

Fixture Performance

LightEngine


CLO Calculator

JAK-LED-WW-350 (4000K)


JAK-LED-WW-350

3/4”

3/4”

4 - 1/2”

4 - 1/8”

3 - 5/8”

OptionalKicker

4 - 1/2” 4 - 1/2”

4 - 1/8”

3 - 5/8”

4 - 1/8”

3 - 5/8”1 - 5/8”

3/4” 3/4”OptionalKicker

OptionalKicker

T-Grid

V-0417








79


V-1016

Photometrics


Gridscale = 1.0 ft per incrementFootcandle Legend

0.5 fc 1.0 fc 2.0 fc 5.0 fc 10.0 fc 20.0 fc






Type: Job Name:




80





ITA - Interlude


T-GRID TRIM STYLES




81



MountingRecessed linear fixture for drywall or wood installations in either a Flush Lens (FLS) or a 3” Regress Lens (REG3). Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips available for ease of installation.






JAKE LED Wall Graze is a recessed linear luminaire comprised of various LED light source options that delivers high performing even illumination that reveals and accentuates texture with shadowing into the desired area. JAKE LED Wall Graze can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

JAKE LED Light Engines and dimmable driver components, when combined together, provide optimal LED lighting system capabilities.


V-0417

JAKE LED4.00” Wall GrazeTrim/Trimless



Made in the USA

Type: Job Name:




82


SPECIFICATION CODE


Dimensions

Voltage

120 277 3475

Driver

EB - Electronic


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

JAK-LED-WG-FLS-400 -Flush Lens

JAK-LED-WG-REG3-400 -3” Regress Lens

Trim Style2



Options

Finishes2


Mounting Options3

HB - Hanger Bracket


NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. see option sheetforcustomfinishes3 see instruction sheet for mounting info4 120V only5 available for EB, D1, D10 drivers only6 compliantwithCCEAChicagoPlenumcoderequirements7 exactmeasurementsbetweenwallsurfacesrequired8 fixtureispositionedoffthewallandincludesalltrim/flangepieces9 elevationviewfacingfixturesideofwall(1)wallwith (1)trim/flangepiece10 see Miter worksheet for details

JAKE LED4.00” Wall GrazeTrim/Trimless


Fixture Performance

LightEngine


CLO Calculator

JAK-LED-WG-FLS-400 (4000K)


Photometrics

3/4”

4 - 3/8”

5 - 5/8”

4 - 1/2”

4 - 1/16” 1 - 5/8”

4 - 3/8”

5 - 5/8”

4 - 1/2”

4 - 1/16”

WA

LLBL

OCK

ING

WA

LLBL

OCK

ING

3/4”

4 - 3/8”

5 - 5/8”

7 - 1/2”

4 - 1/16”

1 - 5/8”

4 - 3/8”

5 - 5/8”

7 - 1/2”

4 - 1/16”

WA

LLBL

OCK

ING

WA

LLBL

OCK

ING

4 - 3/8”

5 - 5/8”4 - 7/8”

4 - 1/16”

WA

LLBL

OCK

ING

4 - 3/8”

5 - 5/8”

7 - 7/8”

4 - 1/16”

WA

LLBL

OCK

ING

(TR) (TL)

V-0417

Flush Lens (FLS)

3” Regress Lens (REG3)JAK-LED-WG-REG3-400 (4000K)


Nominal Length

2 8 - 2’3 8 - 3’4 8 - 4’6 8 - 6’ 8 8 - 8’

CR_8 - Continuous Run

WW_7 - Wall-to-Wall

1WL_ 9 - 1 Wall Left

1WR_ 9 - 1 Wall Right

MTR_10 - Miter



http://www.birchwoodlighting.com/downloads/per_miter.pdf







83



MountingRecessed linear fixture T-Grid ceiling installations in either a Flush Lens (FLS) or a 3” Regress Lens (REG3). Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips available for ease of installation.






JAKE LED Wall Graze is a recessed linear luminaire comprised of various LED light source options that delivers high performing even illumination that reveals and accentuates texture with shadowing into the desired area. JAKE LED Wall Graze can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

JAKE LED Light Engines and dimmable driver components, when combined together, provide optimal LED lighting system capabilities.


V-0417

JAKE LED4.00” Wall GrazeT-Grid



Made in the USA

Type: Job Name:




84


SPECIFICATION CODE


Dimensions

Voltage

120 277 3474

Driver

EB - Electronic


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Trim Style2

T-Grid CeilingsLT9 - 9/16” exposedlay-inLT15 - 15/16” exposedlay-inTT9 - 9/16” TegularTT15 - 15/16” TegularITA - Interlude®

ST9 - Slot Grid

Options

Finishes2



NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes3 see instruction sheet for mounting info3 120V only4 available for EB, D1, D10 drivers only5 compliantwithCCEAChicagoPlenumcoderequirements6 exactmeasurementsbetweenwallsurfacesrequired7 fixtureispositionedoffthewallandincludesalltrim/flangepieces8 elevationviewfacingfixturesideofwall(1)wallwith (1)trim/flangepiece9 see Miter worksheet for details



Fixture Performance

LightEngine


CLO Calculator

JAK-LED-WG-FLS-400 (4000K)


Photometrics

3/4”

4 - 3/8”

5 - 5/8”

4 - 1/2”

4 - 1/16” 1 - 5/8”

4 - 3/8”

5 - 5/8”

4 - 1/2”

4 - 1/16”

WA

LLBL

OCK

ING

WA

LLBL

OCK

ING

5 - 5/8”

4 - 1/16”

WA

LLBL

OCK

ING

4 - 3/8”

4 - 1/2”

8 - 5/8”

4 - 1/16”

WA

LLBL

OCK

ING

4 - 3/8”

7 - 1/2”

(T-Grid)

V-0417

Flush Lens (FLS)

3” Regress Lens (REG3)

Model

JAK-LED-WG-FLS-400 -Flush Lens

JAK-LED-WG-REG3-400 -3” Regress Lens

JAK-LED-WG-REG3-400 (4000K)


Nominal Length

2 7 - 2’3 7 - 3’4 7 - 4’6 7 - 6’ 8 7 - 8’


WW_6 - Wall-to-Wall



MTR_9 - Miter










85


V-1016




ITA - Interlude


T-GRID TRIM STYLES



Type: Job Name:




86



87







Options90º corner angles for transverse-run applications: from wall to ceiling Inside Corner (IC90), Outside Corner (OC90), and Face surface (F90). Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.


JAKE LED is a recessed linear luminaire comprised of various apertures, LED light source options and accessory options. JAKE LED 1.65”, 2.25”, 3.25” and 5.00” can be installed in T-Grid ceiling installations.



JAKE LED REGRESSED LENS1.65” 2.25” 3.25” 5.00” 4TZ 6TZT-Grid

1” Regressed Lens Linear LED Fixture

V-0417


Made in the USA

Type: Job Name:




88


SPECIFICATION CODE


Dimensions

Voltage

120 277 3475

Driver

EB - Electronic


Lens

FW - Frosted White

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

JAK-LED-REG-165 -1.65” aperture




JAK-LED-REG-4TZ7 -3.25” aperture in 4” Armstrong® TechZone®

JAK-LED-REG-6TZ8 -5.00” aperture in 6” Armstrong® TechZone®

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

MTR-R5

Miter RunMTR-REC5

Miter Rectangle

Options



Finishes2


NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes3 120V only4 consult factory for EM options5 available for EB, D1, D10 drivers only6 see T-Grid sheet for more details7 JAK-LED-REG-4TZ only available with 9/16” trim style8 JAK-LED-REG-500/6TZ are not available in 2700K color temp9 compliantwithCCEAChicagoPlenumcoderequirements

LightEngine


CLO Calculator

Trim Style2

T-Grid Ceilings6


165

1-5/8”

3-1/8”

4-15/16”

2-1/4”

3-3/4”

2-3/4”

2-1/8”

5.0” nom.

4-7/8”

1”

1”

1”

1”

4-15/16”

4-15/16”

4-15/16”

225

325

500

LED

165 (4000K FW lens)


225 (4000K FW lens)


325 (4000K FW lens)


500 (4000K FW lens)

SLO - 89.0lm/[email protected]/ftfixtureinputwatts, 517 lm/ft.HLO-83.0lm/[email protected]/ftfixtureinputwatts,1004lm/ft.CLO - refer to CLO Calculator500 LED supplement info

JAK-LED-REG-

V-0417

1-5/8”

3-1/8”

4-15/16”

2-1/4”

3-3/4”

2-3/4”

2-1/8”

5.0” nom.

4-7/8”

1”

1”

1”

1”

4-15/16”

4-15/16”

4-15/16”















89


V-1016




ITA - Interlude


REGRESSED LENS T-GRID TRIM STYLES



Type: Job Name:




90



91



JAKE LED REGRESSED LENS1.65” 2.25” 3.25” 5.00”Trim/Trimless


V-0417


Made in the USA

ConstructionFixture body is constructed of heavy gauge extruded aluminum sides and steel back. Fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet, and continuous run lengths. Lenses are extruded acrylic.

MountingRecessed linear fixture for drywall or wood ceiling installations, or for mounting on the wall on a vertical plane. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips provided for ease of installation.


Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications. FinishesTrim (TR) is standard Satin Clear (SC) anodized. Custom powder coat finishes available - consult factory.

Options(FBLSS) Flat Blade Louver Semi-Specular. 90º corner angles for transverse-run applications: from wall to ceiling Inside Corner (IC90), Outside Corner (OC90), and Face surface (F90). Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.

JAKE LED with 1” regressed lens is a recess mounted linear luminaire available in various apertures, LED light source options and accessory options. JAKE LED 1.65”, 2.25”, 3.25” and 5.00” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available.

Offering various installations from wall to ceiling, or along the wall, our entire JAKE LED family qualifies as one of our most versatile fixtures yet. Optional 90º mitered angles allow the creation of endless transverse runs: Inside Corner wall to ceiling (IC90), Outside Corner (OC90), or Face surface (F90). JAKE LED accessory options are designed to fit your most sophisticated lighting applications via lenses, louvers, and distinctive finishes.

JAKE LED Light Engines and dimmable driver components provide optimal LED lighting system capabilities.

Type: Job Name:




92


SPECIFICATION CODE

Dimensions

LED

165 (4000K FW lens)


225 (4000K FW lens)


325 (4000K FW lens)


500 (4000K FW lens)

SLO - 89.0lm/[email protected]/ftfixtureinputwatts, 517 lm/ft.HLO-83.0lm/[email protected]/ftfixtureinputwatts,1004lm/ft.CLO - refer to CLO Calculator500 LED supplement info

V-0417

JAKE LED REGRESSED LENS1.65” 2.25” 3.25” 5.00”Trim/Trimless


Voltage

120 277 3478

Driver

EB - Electronic


Lens

FW - Frosted White


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model





Trim Style2



Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

MTR-R4

Miter RunMTR-REC4

Miter Rectangle

Options



Finishes2


Mounting Options5

OHMB - Overhead Mounting BracketHB - Hanger Bracket

NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, T-Grid standard is Matte White, TL standard is Mill Finish. See option sheetforcustomfinishes3 FBLS available for 225 and 3254 see miter worksheetforspecification (must provide detailed drawing for order)5 see instruction sheet for mounting info6 120V only7 consult factory for EM options8 available for EB, D1, D10 drivers only9 JAK-LED-500 not available in 2700K color temp10 compliantwithCCEAChicagoPlenumcoderequirements

LightEngine


CLO Calculator


JAK-LED-REG-

1-5/8”

2-1/4”

3/4”

3-1/8”

3-3/4”

3/4”

2-1/8”

2-3/4”

3/4”

(TR)

1-5/8”

4-15/16”4-15/16”

4-15/16”4-15/16”

4-15/16”4-15/16”

2-1/4”

1-5/8”

3-1/8”

4-15/16”

3-3/4”

1-5/8”

2-1/8”

2-3/4”

1-5/8”

165

225

325

(TL)

5.0” nom. 5.0” nom.

3/4” 1-5/8”

500

4-7/8” 4-7/8”

1”1”

1”1”

1” 1”

1”1”

4-15/16”














93


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet, and continuous run lengths. Lenses are extruded acrylic in either a Regress (PR) or Flush (PM) lens style.

MountingRecessed linear fixture for drywall or wood installations, or for mounting on the wall on a vertical plane. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting clips provided for ease of installation.


Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications. FinishesTrim (TR) is standard Satin Clear (SC) anodized. Trimless (TL) is standard Mill finish. Custom powder coat finishes available - consult factory.

Options(EM) Emergency Battery Pack as well as (CP) Chicago Plenum option available. Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.



Made in the USA

V-0417

JAKE LED Perimeter1.65”, 2.25”, 3.25”, 5.00” Trim/Trimless


JAKE LED Perimeter is a 3” deep regressed or flush lens style recessed linear luminaire comprised of various apertures, LED light sources and accessory options. JAKE LED 1.65”, 2.25”, 3.25” and 5.00” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid for drop ceilings are also available.


Type: Job Name:




94


SPECIFICATION CODE

model size trim style light engine color temp length lens voltage driver option option

Dimensions

Voltage

120 277 3475

Driver

EB - Electronic


Lens

FW - FrostedWhite

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Model

JAK-LED-PR-FLS -Flush Lens

JAK-LED-PR-REG3 -3” Deep Regress Lens

Nominal Length

2 8 - 2’3 8 - 3’4 8 - 4’6 8 - 6’ 8 8 - 8’


WW_7 - Wall-to-Wall



MTR_10 - Miter

Options



Finishes2

SL - SilverFB - Flat BlackMW - Matte WhiteCUP - Custom powder coat

NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. see option sheetforcustomfinishes3 120V only4 consult factory for EM options5 available for EB, D1, D10 drivers only6 compliantwithCCEAChicagoPlenumcoderequirements7 exactmeasurementsbetweenwallsurfacesrequired8 fixtureispositionedoffthewallandincludesalltrim/flangepieces9 elevationviewfacingfixturesideofwall(1)wallwith (1)trim/flangepiece10 see Miter worksheet for details

JAKE LED Perimeter1.65”, 2.25”, 3.25”, 5.00” Trim/Trimless


LightEngine


CLO Calculator

Trim Style2


TL - Trimless Mud-over flange

V-0417

6-15/16”

4-7/16”

Wal

l

Trim RegressJAK-LED-PR-REG3 JAK-LED-PR-REG3

3”

6-15/16”

6-3/16”

Wal

l

3”

6-15/16”

3-7/16”

Wal

l

3”

6-15/16”

3”

Wal

l

3”

165

225

325

500

6-15/16”

5-5/16”

Wal

l

Trim-less Regress

3”

6-15/16”

7-1/16”

Wal

l

3”

6-15/16”

4-5/16”

Wal

l

3”

6-15/16”

3-7/8”

Wal

l

3”

3-15/16”

4-3/8”

Wal

l

Trim Flush

3-15/16”

6-1/8”

Wal

l

3-15/16”

3-3/8”

Wal

l

3-15/16”

2-15/16”

Wal

l

3-15/16”

5-1/4”

Wal

l

Trim-less Flush

3-15/16”

7”

Wal

l

3-15/16”

4-1/4”

Wal

l

3-15/16”

3-13/16”

Wal

l

JAK-LED-PR-FLS JAK-LED-PR-FLS

LED

165 (4000K FW lens)

SLO - 81lm/[email protected]/ftfixtureinputwatts, 236 lm/ft.HLO - 80 lm/[email protected]/ftfixtureinputwatts, 472 lm/ft.CLO - refer to CLO Calculator165 LED supplement info

225 (4000K FW lens)

SLO - 68lm/[email protected]/ftfixtureinputwatts, 301 lm/ft.HLO - 67lm/[email protected]/ftfixtureinputwatts, 603 lm/ft.CLO - refer to CLO Calculator225 LED supplement info

325 (4000K FW lens)

SLO - 79lm/[email protected]/ftfixtureinputwatts, 348 lm/ft.HLO-77lm/[email protected]/ftfixtureinputwatts, 697 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

500 (4000K FW lens)


Size

165225325500













95


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet, and continuous run lengths. Lenses are extruded acrylic in either a Regress (PR) or Flush (PM) lens style.




Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications. Options(EM) Emergency Battery Pack as well as (CP) Chicago Plenum option available.



JAKE LED Perimeter is a 3” deep regressed or flush lens style recessed linear luminaire comprised of various apertures, LED light sources and accessory options. Several T-grid styles for drop ceilings are available such as; Tegular, Exposed lay-in, Interlude® and Slot Grid.

JAKE LED 1.65”, 2.25”, 3.25” and 5.00” can also be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange.



Made in the USA

V-0417

JAKE LED Perimeter1.65”, 2.25”, 3.25”, 5.00”T-Grid


Type: Job Name:




96


SPECIFICATION CODE

model size trim style light engine color temp length lens voltage driver option option

Dimensions

Voltage

120 277 3475

Driver

EB - Electronic


Lens

FW - FrostedWhite

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Nominal Length

2 10 - 2’3 10 - 3’4 10 - 4’6 10 - 6’ 8 10 - 8’


WW_7 - Wall-to-Wall



MTR_9 - Miter

Options



Finishes2


NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes3 120V only4 consult factory for EM options5 available for EB, D1, D10 drivers only6 compliantwithCCEAChicagoPlenumcoderequirements7 exactmeasurementsbetweenwallsurfacesrequired8 see T-Grid sheet for more details9 see Miter worksheet for details10 fixtureispositionedofftheT-gridandincludesalltrimpieces11 elevationviewfacingfixturesideofwall(1)wallwith (1)trim/flangepiece



LED

LightEngine


CLO Calculator

165 (4000K FW lens)

SLO - 81lm/[email protected]/ftfixtureinputwatts, 236 lm/ft.HLO - 80 lm/[email protected]/ftfixtureinputwatts, 472 lm/ft.CLO - refer to CLO Calculator165 LED supplement info

225 (4000K FW lens)


325 (4000K FW lens)

SLO - 79lm/[email protected]/ftfixtureinputwatts, 348 lm/ft.HLO-77lm/[email protected]/ftfixtureinputwatts, 697 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

500 (4000K FW lens)


Trim Style2

T-Grid Ceilings8


V-0417

6-15/16”

4-1/16”

Wal

l

Regress Lens T-Grid (PR)

3”

6-15/16”

5-13/16”

Wal

l

3”

6-15/16”

3-1/16”

Wal

l

3”

6-15/16”

2-5/8”

Wal

l

3”

3-15/16”

3-7/8”

Wal

l

3-15/16”

5-5/8”

Wal

l

3-15/16”

2-7/8”

Wal

l

3-15/16”

2-7/16”

Wal

l

165

225

325

500

Flush Lens T-Grid (PM)

Model

JAK-LED-PR-FLS -Flush Lens

JAK-LED-PR-REG3 -3” Deep Regress Lens

Size

165225325500















97


V-1016




ITA - Interlude


T-GRID TRIM STYLES



Type: Job Name:




98


V-1016


99



Elusive and revealing: JILL combines the best of both qualities within a striking, slender aperture that almost dissolves into the ceiling, yet still unveils a subtle glow from the unique dropped-lens feature.

JILL 1.65”, 2.25” or 3.25” can be mounted in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless mud-over flange. T-grid models for drop ceilings are also available.

Acrylic dropped lenses allow even, and glowing illumination, while giving the impression of light beams on the surface of your application. With a smaller aperture, multiple installation options and the appearance of a floating lens, JILL offers beauty in plain sight.

JILL1.65”, 2.25”, 3.25” Trim/TrimlessT5/T5HO/T8

Drop-Lens Recessed Linear Fixture

ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated acrylic.

Acrylic Lens Options(FW) Frosted White lens, (165, 225, 325). (RLW) Reveal Frosted White lens with 3/8” extension, (225, 325 only). (FT) Prismatic Sided Frosted White (325 only). FinishesTrim (TR) is standard Satin Clear (SC) anodized. Trimless (TL) is standard Mill finish. Custom powder coat finishes available - consult factory.

Lamping and BallastT5, T5HO or T8 linear fluorescent lamps. Integral (EB) electronic ballast standard. Dimming ballast and (EM) Emergency battery pack optional. Consult factory for ballast and emergency battery compatibility, specifications and selection. Lamps and ballast are accessible from below the ceiling.



V-0617


Made in the USA

Type: Job Name:




100


JILL1.65”, 2.25”, 3.25” Trim/TrimlessT5/T5HO/T8


Model

JIL-165 -1.65” aperture


JIL-325-13.25” aperture1 lamp in cross section


Voltage

120 277

SPECIFICATION CODE

model trim style lamp type length lens lens end cap voltage ballast options options

Lamp Type

T5T5HO5

T86

NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. See option sheetforcustomfinishes3 staggered lamping for 6’ lengths and longer for 325 (165 lamps are end to end)4 325 only5 (2) T5HO lamps not available6 not available in 1657 see instruction sheet for mounting info8 only available in 2259 225 and 325 only10compliantwithCCEAChicagoPlenumcoderequirements

Lens

FW - Frosted White

TDW8 - Tear Drop Frosted White


FT 4 - Prismatic Sided Frosted White

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-15/16”

3-3/4”

3/4” 3-1/8”

3-15/16”4-7/8”

3-3/4”

1-5/8”

2-1/8”

3-15/16”

2-3/4”

3/4” 2-1/8”

3-15/16”

2-3/4”

1-5/8”

165

225

325

(TR) (TL)

1-5/8”

4-7/8”

2-1/4”

3-1/8”

3-3/4”

2-1/8”

2-3/4”

(T-Grid)

4-7/8”

1-1/2”3/8”RLW

LENS FWLENS

3/8”RLWLENS 1-1/2” FW

LENS1-1/2”

3/8”RLWLENS FW

LENS

1-1/2” FWLENS

1-1/2” FWLENS

1-1/2” FWLENS

1-1/2”

3/8”RLWLENS

FW/FTLENS

1-1/2”3/8”RLW

LENS FW/FTLENS

1-1/2”3/8”RLW

LENS FW/FTLENS

2-1/4”

3-15/16”

2-3/4”

3/4”

1-1/2”(TDW)

Dimensions

Trim Style2



LensEnd Cap

IEC - Illuminated End Cap

MEC-SCMachined End Cap - Satin Clear

MEC-MWMachined End Cap - Matte White

MEC-FBMachined End Cap - Flat Black

MEC-CUP Machined End Cap - Custom Powder Coat Colo

Ballast

EB - Electronic

Dimming:HL3 - Hi-Lume 3DES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Options

EM - EmergencyBattery Pack

Trim Finishes2


Mounting Options7



Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 3 8 - 8’ 3

CR_1

Continuous Run

V-0617




101



Elusive and revealing: JILL combines the best of both qualities within a striking, slender aperture that almost dissolves into the ceiling, yet still unveils a subtle glow from the unique dropped-lens feature.

JILL 1.65”, 2.25” or 3.25” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available. Acrylic dropped lenses allow even, and glowing illumination, while giving the impression of light beams on the surface of your application. With a smaller aperture, multiple installation options and the appearance of a floating lens, JILL offers beauty in plain sight.

JILL1.65” 2.25” 3.25” 4TZ T-GridT5/T5HO/T8


ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated acrylic.

Acrylic Lens Options(FW) Frosted White lens, (165, 225, 325). (RLW) Reveal Frosted White lens with 3/8” extension, (225, 325 only). (FT) Prismatic Sided Frosted White (325 only). FinishesFixture exposed edges are standard Matte White (MW). Custom powder coat finishes available - consult factory.

Lamping and BallastT5, T5HO or T8 linear fluorescent lamps. Integral (EB) electronic ballast standard. Dimming ballast and (EM) Emergency battery pack optional. Consult factory for ballast and emergency battery compatibility, specifications and selection. Lamps and ballast are accessible from below the ceiling.

MountingT-Grid ceiling installations. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting options available for ease of installation.


V-0217


Made in the USA

Type: Job Name:




102




Model





JIL-4TZ-19


1 lamp in cross section

Voltage

120 277

SPECIFICATION CODE

model trim style lamp type length lens lens end cap voltage ballast options options

Lamp Type

T5T5HO6

T87

NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes3 staggered lamping for 6’ lengths and longer for 325 (165 lamps are end to end)4 325 only5 see T-Grid sheet for more details, 2’ and 4’ standalone T8 and (2) T8 not available with T-Grid options6 (2) T5HO lamps not available7 not available in 1658 only available in 2259 JIL-4TZ only available with 9/16” trim style10 225 and 325 only11 compliantwithCCEAChicagoPlenumcoderequirements

Lens

FW - Frosted White




Dimensions

Trim Style2

T-Grid Ceilings5


LensEnd Cap






Ballast

EB - Electronic


Options

EM - EmergencyBattery Pack


Trim Finishes2


Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 3 8 - 8’ 3

CR_1

Continuous Run

165

325

V-0617

225

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-15/16”

3-3/4”

3/4” 3-1/8”

3-15/16”4-7/8”

3-3/4”

1-5/8”

2-1/8”

3-15/16”

2-3/4”

3/4” 2-1/8”

3-15/16”

2-3/4”

1-5/8”

165

225

325

(TR) (TL)

1-5/8”

4-7/8”

2-1/4”

3-1/8”

3-3/4”

2-1/8”

2-3/4”

(T-Grid)

4-7/8”

1-1/2”3/8”RLW

LENS FWLENS


LENS1-1/2”

3/8”RLWLENS FW

LENS

1-1/2” FWLENS

1-1/2” FWLENS

1-1/2” FWLENS

1-1/2”

3/8”RLWLENS

FW/FTLENS

1-1/2”3/8”RLW

LENS FW/FTLENS

1-1/2”3/8”RLW

LENS FW/FTLENS

2-1/4”

3-15/16”

2-3/4”

3/4”

1-1/2”(TDW)

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-15/16”

3-3/4”

3/4” 3-1/8”

3-15/16”4-7/8”

3-3/4”

1-5/8”

2-1/8”

3-15/16”

2-3/4”

3/4” 2-1/8”

3-15/16”

2-3/4”

1-5/8”

165

225

325

(TR) (TL)

1-5/8”

4-7/8”

2-1/4”

3-1/8”

3-3/4”

2-1/8”

2-3/4”

(T-Grid)

4-7/8”

1-1/2”3/8”RLW

LENS FWLENS


LENS1-1/2”

3/8”RLWLENS FW

LENS

1-1/2” FWLENS

1-1/2” FWLENS

1-1/2” FWLENS

1-1/2”

3/8”RLWLENS

FW/FTLENS

1-1/2”3/8”RLW

LENS FW/FTLENS

1-1/2”3/8”RLW

LENS FW/FTLENS

2-1/4”

3-15/16”

2-3/4”

3/4”

1-1/2”(TDW)




103




V-1016




ITA - Interlude


T-GRID TRIM STYLES

Type: Job Name:




104


V-1016


105



Elusive and revealing: JILL LED combines the best of both qualities within a striking, slender aperture that almost dissolves into the ceiling, yet still unveils a subtle glow from the unique dropped-lens feature.

JILL LED 1.65”, 2.25” or 3.25” can be mounted in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless mud-over flange. T-grid models for drop ceilings are also available.

Acrylic dropped lenses allow even, and glowing illumination, while giving the impression of light beams on the surface of your application. With a smaller aperture, multiple installation options and the appearance of a floating lens, JILL offers beauty in plain sight.

JILL features LED Light Engines and dimmable power supply components which combined together provide optimal LED lighting system capabilities and a 5 year system warranty.

ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated acrylic.

OptionsDimming driver, Emergency battery pack (EM). Custom Miter corners are available, Consult factory for compatibility, specifications and selection.

Acrylic Lens Options(FW) Frosted White lens, (165, 225, 325). (RLW) Reveal Frosted White lens with 3/8” extension, (225, 325 only). (FT) Prismatic Sided Frosted White (325 only).






V-0417

JILL LED1.65” 2.25” 3.25” Trim/Trimless



Made in the USA

Type: Job Name:




106


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Trim Style2



SPECIFICATION CODE

Voltage

120 277 3475

Driver

EB - Electronic


model trim style light engine color temp length lens lens end voltage driver options options cap

Model

JIL-LED-165 -1.65” aperture

JIL-LED-225 - 2.25” aperture


1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-3/4”

3/4” 3-1/8”

3-15/16”

3-3/4”

1-5/8”

1-3/4” 1-3/4”

1-1/2” 1-1/2”

1-5/8”

4-7/8”

2-1/4”

3-1/8”

3-3/4”

1-1/2”

1-3/4”

165

325

(TR) (TL) (T-Grid)

3-15/16” 4-7/8”

2-1/8”

2-3/4”

3/4” 2-1/8”

3-15/16”

2-3/4”

1-5/8”

1-1/2”

2-1/8”

2-3/4”

225 3-15/16” 4-7/8”

3/8”RLWLENS FW

LENS1-1/2”

3/8”RLWLENS FW

LENS1-1/2”

3/8”RLWLENS FW

LENS

3/8”RLWLENS

FW/FTLENS

3/8”RLWLENS

FW/FTLENS

3/8”RLWLENS FW/FT

LENS

2-1/4”

2-1/4”

3-15/16”

1-1/2”

2-1/4”

3-15/16”

2-3/4”

3/4”

1-1/2”(TDW)

Dimensions

LensEnd Cap






Options


Finishes2


Mounting Options4



Lens

FW - Frosted White


RLW9 - RevealFrosted White 3/8”extended


Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. See option sheetforcustomfinishes3 only available in 3254 see instruction sheet for mounting info5 available for EB, D1, D10 drivers only6 120V only7 consult factory for EM options8 only available in 2259 only available in 225 and 32510 compliantwithCCEAChicagoPlenumcoderequirements

JILL LED1.65” 2.25” 3.25” Trim/Trimless


LED

LightEngine


CLO Calculator

165 (4000K FW lens)


225 (4000K FW lens)


325 (4000K FW lens)


V-0617











107



Elusive and revealing: JILL LED combines the best of both qualities within a striking, slender aperture that almost dissolves into the ceiling, yet still unveils a subtle glow from the unique dropped-lens feature.

JILL LED 1.65”, 2.25” or 3.25” can be installed in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless (TL) mud-over flange. T-grid models for drop ceilings are also available. Acrylic dropped lenses allow even, and glowing illumination, while giving the impression of light beams on the surface of your application. With a smaller aperture, multiple installation options and the appearance of a floating lens, JILL offers beauty in plain sight.

JILL features LED Light Engines and dimmable power supply components which combined together provide optimal LED lighting system capabilities and a 5 year system warranty.

ConstructionFixture body is constructed of heavy gauge extruded aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated acrylic.

OptionsDimming driver, Emergency battery pack (EM). Custom Miter corners are available, Consult factory for compatibility, specifications and selection.

Acrylic Lens Options(FW) Frosted White lens, (165, 225, 325). (RLW) Reveal Frosted White lens with 3/8” extension, (225, 325 only). (FT) Prismatic Sided Frosted White (325 only).






V-0417

JILL LED1.65” 2.25” 3.25” 4TZT-Grid



Made in the USA

Type: Job Name:




108


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Trim Style2

T-Grid Ceilings3

LT9 - 9/16” exposedlay-inLT15 - 15/16” exposedlay-inTT9 - 9/16” TegularTT15 - 15/16” TegularITA - Interlude®

ST9 - Slot Grid

SPECIFICATION CODE

Voltage

120 277 3476

Driver

EB - Electronic


model trim style light engine color temp length lens lens end voltage driver options options cap

Model

JIL-LED-165 -1.65” aperture



JIL-LED-4TZ9


Dimensions

LensEnd Cap





MEC-CUP Machined End Cap - Custom Powder Coat Color

Options



Finishes2


Lens

FW - Frosted White


RLW10 - RevealFrosted White 3/8”extended


Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, See option sheetforcustomfinishes3 see T-Grid sheet for more details4 only available in 325 5 available for EB, D1, D10 drivers only6 120V only7 consult factory for EM options8 only available in 2259 JIL-LED-4TZ only available with 9/16” trim style10 only available in 225 and 32511 compliantwithCCEAChicagoPlenumcoderequirements



LED

LightEngine


CLO Calculator

165 (4000K FW lens)


225 (4000K FW lens)


325 (4000K FW lens)


165

325

V-0617

225

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4” 1-5/8”

3-1/8”

3-3/4”

3/4” 3-1/8”

3-15/16”

3-3/4”

1-5/8”

1-3/4” 1-3/4”

1-1/2” 1-1/2”

1-5/8”

4-7/8”

2-1/4”

3-1/8”

3-3/4”

1-1/2”

1-3/4”

165

325

(TR) (TL) (T-Grid)

3-15/16” 4-7/8”

2-1/8”

2-3/4”

3/4” 2-1/8”

3-15/16”

2-3/4”

1-5/8”

1-1/2”

2-1/8”

2-3/4”

225 3-15/16” 4-7/8”

3/8”RLWLENS FW

LENS1-1/2”

3/8”RLWLENS FW

LENS1-1/2”

3/8”RLWLENS FW

LENS

3/8”RLWLENS

FW/FTLENS

3/8”RLWLENS

FW/FTLENS

3/8”RLWLENS FW/FT

LENS

2-1/4”

2-1/4”

3-15/16”

1-1/2”

2-1/4”

3-15/16”

2-3/4”

3/4”

1-1/2”(TDW)











109


V-1016




ITA - Interlude


T-GRID TRIM STYLES



Type: Job Name:




110


V-1016


111



Elusive and revealing: JILL ASYM combines both qualities with a dropped-asymmetric lens designed to deliver wall-washing illumination from an ultra-slender recessed aperture. JILL ASYM’s 2-dimensional lens is designed to obscure lamp image on vertical side while simultaneously projecting wall washing light from the diagonal side of the frosted and clear prismatic acrylic lens combination.

JILL ASYM can be mounted in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless mud-over flange.

Asymmetric acrylic dropped lenses provide smooth direct and wall wash light distribution to any architectural indoor specification. With a smaller aperture, multiple installation options and the appearance of a floating asymmetric lens, JILL ASYM offers beauty in plain sight.

JILL - ASYM 1.65” Asymmetric Drop LensT5/T5HO Trim/Trimless


ConstructionFixture body is constructed of heavy gauge extruded anodized aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated precision-cut acrylic.

Lamping and BallastT5, T5HO fluorescent lamps. Integral (EB) electronic ballast standard. Dimming ballast and (EM) Emergency battery pack optional. Consult factory for ballast and emergency battery compatibility, specifications and selection. Lamps and ballast are accessible from below the ceiling.


MountingRecessed linear fixture for drywall or wood ceiling installations, or for mounting on the wall on a vertical plane. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting options available for ease of installation.

Acrylic LensThe acrylic lens is a co-extrusion frosted clear linear prismatic on the angled face, frosted white on the adjacent side.


V-0617


Made in the USA

Type: Job Name:




112


Model

JIL ASYM 165-JILL 1.65” aperture1 lamp in cross section

Voltage

120 277 347

SPECIFICATION CODE

model trim style lamp type length lens end cap voltage ballast options

Lamp Type

StandardT5T5HO

NOTES1 specify lengths in nominal feet2 TR standard is Satin Clear, TL standard is Mill Finish. see option sheetforcustomfinishes 3 consult factory for ballast compatibility4 consult factory for EM options5 see instruction sheet for mounting info6 compliantwithCCEAChicagoPlenumcoderequirements

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4”1-5/8”

1-11/16” 1-11/16”

1-5/8”

4-7/8”

2-1/4”

1-11/16”

165

(TR) (TL) (T-Grid)

13/16”

Dimensions

Trim Style2



LensEnd Cap






Ballast3

EB - Electronic

Dimming:HL33 - Hi-Lume 3DES3 - EcoSystemESH3 - EcoSystem H-Series0-10V - 0-10V

Options


Trim Finishes2


Mounting Options5



Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

JILL - ASYM 1.65” Asymmetric Drop LensT5/T5HO Trim/Trimless


Candela Distribution Polar Plot - (JIL165-ASYM-T5HO-4-IEC)

0.00.05.0 5.010.0 10.015.0 15.0

20.0

20.0

25.0

25.0

30.0

30.0

35.0

35.0

40.0

40.0

45.0

45.0

50.0

50.0

55.0

55.0

60.0

60.0

65.0

65.0

70.0

70.0

75.0

75.0

80.0

80.0

85.085.0

90.0 90.0

95.095.0100.0

100.0105.0

110.0 135.0 135.0180.0180.0

00

127

127

254

380

507

634

761

888

1014

0.0 - 180.090.0 - 270.0

V-0617




113




JILL ASYM can be mounted in T-Grid ceiling installations. Asymmetric acrylic dropped lenses provide smooth direct and wall wash light distribution to any architectural indoor specification. With a smaller aperture, multiple installation options and the appearance of a floating asymmetric lens, JILL ASYM offers beauty in plain sight.


JILL - ASYM 1.65” Asymmetric Drop LensT5/T5HO T-Grid


Made in the USA

ConstructionFixture body is constructed of heavy gauge extruded anodized aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated precision-cut acrylic.

Lamping and BallastT5, T5HO fluorescent lamps. Integral (EB) electronic ballast standard. Dimming ballast and (EM) Emergency battery pack optional. Consult factory for ballast and emergency battery compatibility, specifications and selection. Lamps and ballast are accessible from below the ceiling.



Acrylic LensThe acrylic lens is a co-extrusion frosted clear linear prismatic on the angled face, frosted white on the adjacent side.


V-0617

Type: Job Name:




114


Model

JIL ASYM 165-JILL 1.65” aperture1 lamp in cross section

Voltage

120 277 347

SPECIFICATION CODE

model trim style lamp type length lens end cap voltage ballast options

Lamp Type

StandardT5T5HO

NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes 3 consult factory for ballast compatibility4 see T-Grid sheet for more details5 consult factory for EM options6 compliantwithCCEAChicagoPlenumcoderequirements

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4”1-5/8”

1-11/16” 1-11/16”

1-5/8”

4-7/8”

2-1/4”

1-11/16”

165

(TR) (TL) (T-Grid)

13/16”

Dimensions

Trim Style2

T-Grid Ceilings4

LT9- 9/16”exposedlay-inLT15-15/16”exposedlay-inTT9 - 9/16” TegularTT15 - 15/16” TegularITA - Interlude®

ST9 - Slot Grid

LensEnd Cap






Ballast3

EB - Electronic


Options



Trim Finishes2


Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run



Candela Distribution Polar Plot - (JIL165-ASYM-T5HO-4-IEC)

0.00.05.0 5.010.0 10.015.0 15.0

20.0

20.0

25.0

25.0

30.0

30.0

35.0

35.0

40.0

40.0

45.0

45.0

50.0

50.0

55.0

55.0

60.0

60.0

65.0

65.0

70.0

70.0

75.0

75.0

80.0

80.0

85.085.0

90.0 90.0

95.095.0100.0

100.0105.0

110.0 135.0 135.0180.0180.0

00

127

127

254

380

507

634

761

888

1014

0.0 - 180.090.0 - 270.0

V-0617




115


V-1016




ITA - Interlude


T-GRID TRIM STYLES



Type: Job Name:




116


V-1016


117




JILL ASYM can be mounted in gypsum ceilings or walls with either a ¾” Trim (TR) or Trimless mud-over flange. Asymmetric acrylic dropped lenses provide smooth direct and wall wash light distribution to any architectural indoor specification. With a smaller aperture, multiple installation options and the appearance of a floating asymmetric lens, JILL ASYM offers beauty in plain sight.


JILL LED - ASYM 1.65” Asymmetric Drop LensTrim/Trimless


Made in the USA

ConstructionFixture body is constructed of heavy gauge extruded anodized aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated precision-cut acrylic. MountingRecessed linear fixture for drywall, or wood ceiling installations, or for mounting on the wall on a vertical plane. Available as continuous row mount. See installation information for specific details regarding installation guidelines. Various mounting options available for ease of installation.



Acrylic LensThe acrylic lens is a co-extrusion frosted white linear prismatic on the angled face, frosted white on the adjacent side.


V-0617

Type: Job Name:




118


Model

JIL-ASYM-LED-165 -JILL 1.65” apertureNarrow LED

Voltage

120 277 3477

SPECIFICATION CODE

model trim style light engine color temp length lens end cap voltage driver options

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4”1-5/8”

1-11/16” 1-11/16”

1-5/8”

2-1/4”

1-11/16”

165

(TR) (TL) (T-Grid)

13/16”

3-15/16”

Dimensions

Trim Style2

TR - 3/4” flange


LensEnd Cap






Options



Trim Finishes2


Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run

JILL LED - ASYM 1.65” Asymmetric Drop LensTrim/Trimless


NOTES1 specify lengths in nominal feet2 T-Grid standard is Matte White see option sheetforcustomfinishes 3 consult factory for driver compatibility4 see T-Grid sheet for more details5 120v only6 consult factory for EM options 7 available for EB, D1, D10 drivers only8 compliantwithCCEAChicagoPlenumcoderequirements

Driver

EB - Electronic

Dimming3

D1 - 1% (nom) 0-10VD10 - 10% 0-10VHLA25 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 series EcoSystemDALI - DALI

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Candela Distribution Polar Plot - (JIL165-ASYM-HF2S-30-4-IEC)

0.00.05.0 5.010.0 10.015.0 15.020.0 20.025.0 25.0

30.0

30.0

35.0

35.0

40.0

40.0

45.0

45.0

50.0

50.0

55.0

55.0

60.0

60.0

65.0

65.0

70.0

70.0

75.0

75.0

80.0

80.0

85.085.0

90.0 90.0

95.095.0

100.0

100.0105.0

135.0 135.0180.0180.0

00

73

73

145

218

290

363

436

508

581

0.0 - 180.090.0 - 270.0

LED

LightEngine


CLO Calculator

165 (4000K FW lens)


V-0617

JIL-ASYM-LED-165




119




JILL ASYM can be mounted in T-Grid drop ceilings.Asymmetric acrylic dropped lenses provide smooth direct and wall wash light distribution to any architectural indoor specification. With a smaller aperture, multiple installation options and the appearance of a floating asymmetric lens, JILL ASYM offers beauty in plain sight.


JILL LED - ASYM 1.65” Asymmetric Drop LensT-Grid


Made in the USA

ConstructionFixture body is constructed of heavy gauge extruded anodized aluminum. Fixtures are available in nominal lengths of 2, 3, 4, 6, 8 feet, and continuous run lengths. Lenses are extruded acrylic. End caps are (MEC) machined aluminum or (IEC) illuminated precision-cut acrylic. MountingRecessed linear fixture for T-Grid ceiling installations. Available as continuous run mount. See installation information for specific details regarding installation guidelines. Various mounting options available for ease of installation.



Acrylic LensThe acrylic lens is a co-extrusion frosted white linear prismatic on the angled face, frosted white on the adjacent side.


V-0617

Type: Job Name:




120


Model

JIL-ASYM-LED-165 -JILL 1.65” apertureNarrow LED

Voltage

120 277 3478

SPECIFICATION CODE

1-5/8”

3-15/16”

2-1/4”

1-5/8”

3-15/16”

2-1/4”

3/4”1-5/8”

1-11/16” 1-11/16”

1-5/8”

2-1/4”

1-11/16”

165

(TR) (TL) (T-Grid)

13/16”

3-15/16”

Dimensions

Trim Style2

T-Grid Ceilings4

LT9 - 9/16” exposedlay-inLT15 - 15/16” exposedlay-inTT9 - 9/16” TegularTT15 - 15/16” TegularITA - Interlude®

ST9 - Slot Grid

LensEnd Cap






Options



Trim Finishes2


Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 8 - 8’

CR_1

Continuous Run



NOTES1 specify lengths in nominal feet2 fixtureexposededgesarestandardMatteWhite, see option sheetforcustomfinishes 3 consult factory for driver compatibility4 see T-Grid sheet for more details 5 120v only6 consult factory for EM options 7 available for EB, D1, D10 drivers only8 compliantwithCCEAChicagoPlenumcoderequirements

Driver

EB - Electronic

Dimming3

D1 - 1% (nom) 0-10VD10 - 10% 0-10VHLA25 - Lutron 2 wireHLA3 - Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Candela Distribution Polar Plot - (JIL165-ASYM-HF2S-30-4-IEC)

0.00.05.0 5.010.0 10.015.0 15.020.0 20.025.0 25.0

30.0

30.0

35.0

35.0

40.0

40.0

45.0

45.0

50.0

50.0

55.0

55.0

60.0

60.0

65.0

65.0

70.0

70.0

75.0

75.0

80.0

80.0

85.085.0

90.0 90.0

95.095.0

100.0

100.0105.0

135.0 135.0180.0180.0

00

73

73

145

218

290

363

436

508

581

0.0 - 180.090.0 - 270.0

LED

LightEngine


CLO Calculator

165 (4000K FW lens)


165

V-0617

model trim style light engine color temp length lens end cap voltage driver options

JIL-ASYM-LED-165







121


V-1016




ITA - Interlude


T-GRID TRIM STYLES



Type: Job Name:




122


V-1016


123



Inspired by the architectural maxim, “Form follows function”, NATHAN provides strong cove-lighting capability within a sleek luminaire designed to eliminate the necessity of building an architectural cove.

NATHAN’s 2 1⁄8” edge profile dissolves like a horizon line into any interior design-scape, yet still delivers a strong kick of forward throw T5 or T5HO illumination. Pure and even indirect light is distributed via the combined sawtooth deflector and 95% specular reflector system. The strength of the heavy duty extruded aluminum body coupled with 1⁄4” machined end-caps, helps to insure straight and easy installations on the job site. NATHAN is suitable for general interior lighting applications, such as: Corridors, Offices, Conference Spaces, Commercial, Healthcare, Institutional, Retail, Hospitality and Restaurants.

As a gorgeous tribute to classic architectural principles and aesthetics, NATHAN combines energy efficiency with lighting design integrity to beautifully enhance any interior space.


Made in the USA

NATHANIndirect Luminous Ledge T5/T5HO Fluorescent

Surface Mount

ConstructionHeavy gauge extruded aluminum housing. 1⁄4” thick precision machined aluminum end-caps. 95% reflectivity specular reflector and sawtooth blade deflector combination for maximum throw. Quick-Connect (QCS) tandem wired as standard feature for easy thru wiring configurations when installing continuous runs.

LampingSuitable for single T5 or T5HO linear fluorescent lamps. Dimming and emergency battery pack options available. Consult factory for ballast and battery pack availability and specifications.

Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous-run mounting available.

Finishes(SC) Satin Clear anodize standard, (MW)Matte White, (FB) Flat Black and (SL) Silver powder coat finishes are available. Custom finishes available - consult factory.

MountingDesigned for wall mount applications. Continuous-run mounting features Quick-Connect tandem wiring (standard) and internal adjoining brackets and splines for straight and precise installation in the field.


V-0116

Type: Job Name:




124


SPECIFICATION CODE

V-0116

NATHANIndirect Luminous Ledge T5/T5HO Fluorescent

Surface Mount

NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 consult factory for emergency battery pack info4 6’fixturehas(2)3’lampsendtoend 8’fixturehas(2)4’lampsendtoend5 contact factory for availability

SAWTOOTH DEFLECTOR

T5 OR T5HO LAMP

HEAVY GAUGE EXTRUDED ALUMINUM HOUSING

95% REFLECTIVESPECULAR FORWARDTHROW REFLECTOR

INTEGRAL BALLAST

WALL MOUNTING BRACKET

5-1/2"

2-1/8"

Nominal Fixture Length

2'Fixture Length

23-1/8"

46-3/4"4'34-15/16"3'

69-1/4"6'92-7/8"8'

Dimensions

Model

NAT-

NATHANIndirectLuminous Ledge

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 4

8 - 8’ 4

CR_1

Continuous Run

Finish

AnodizedSC -Satin Clear


Voltage

120 277 3475

Options


PDC - Plastic Dust Cover

model lamp length finish voltage ballast option

Lamp Type

T5T5HO

Ballast



NAT


125



Inspired by the architectural maxim, “Form follows function”, NATHAN provides strong cove-lighting capability within a sleek luminaire designed to eliminate the necessity of building an architectural cove.

NATHAN’s 2 1⁄8” edge profile dissolves like a horizon line into any interior design-scape, yet still delivers a strong kick of forward throw LED illumination. Pure and even indirect light is distributed via the combined diffuser and LED engine system to provide smooth ceiling illumination or wall-washing without shadows, hot-spots, or glare. NATHAN is suitable for general interior lighting applications, such as: Corridors, Offices, Conference Spaces, Commercial, Healthcare, Institutional, Retail, Hospitality and Restaurants.

As a gorgeous tribute to classic architectural principles and aesthetics, NATHAN combines energy efficiency with lighting design integrity to beautifully enhance any interior space.


Made in the USA

NATHAN LEDIndirect Luminous Ledge Narrow Distributed Array

Surface Mount

ConstructionHeavy gauge extruded aluminum housing. 1⁄4” thick precision machined aluminum end-caps. Quick-Connect (QCS) tandem wired as standard feature for easy thru wiring configurations when installing continuous runs.

Fixture LengthFixtures are available in 2 through 8 foot nominal lengths. Continuous run lengths available.

Finishes(SC) Satin Clear anodize standard, (MW)Matte White, (FB) Flat Black and (SL) Silver powder coat finishes are available. Custom finishes available - consult factory.



OpticsAvailable in Wide or Narrow distribution.

MountingDesigned for wall mount applications. Continuous run mounting features Quick-Connect tandem wiring (standard) and internal adjoining brackets and splines for straight and precise installation in the field. Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.

V-0417

Type: Job Name:




126


SPECIFICATION CODE

NATHAN LEDIndirect Luminous Ledge Narrow Distributed Array

Surface Mount

NOTES1 specify length in nominal feet2 contact factory for custom color3 120V only4 available for EB, D1, D10 drivers only

HEAVY GAUGE EXTRUDED ALUMINUM HOUSING

INTEGRAL DRIVER

WALL MOUNTING BRACKET

5-1/2"

2-1/8" 2-7/10"

DIFFUSER LENS

REFRACTOR LENS

LED MODULE

PDC - PLASTIC DUST COVER

Dimensions

Model

NAT-LED -

NATHAN LED5.25”

Nominal Length

2 - 2’3 - 3’4 - 4’5 - 5’6 - 6’7 - 7’8 - 8’

CR_1

Continuous Run

Finish

AnodizedSC -Satin Clear


Voltage

120 277 3474

Options


model light color optic length finish voltage driver option engine temp

Driver


DimmingD1 - 1% (nom)0-10VD10 - 10% 0-10VHLA23 - Lutron 2 wireHLA3 -Lutron 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

V-0417

ColorTemp

27- 2700K 30 - 3000K35 - 3500K40 - 4000K

Optic

10 - Narrow Distribution80 - Wide Distribution

LightEngine


CLO Calculator

LED

NATHANSLO - 105.5lm/[email protected]/ftfixtureinputwatts, 464 lm/ft.HLO-99.2lm/wattdelivered@9w/ftfixtureinputwatts, 893 lm/ft.CLO - refer to CLO CalculatorLED supplement info

80 - Wide Distribution 10 - Narrow Distribution

ngle = 0, Vertical Angle = 145

Maximum Candela 4 ft. �xture = 2136.89Located at Horizontal Angle = 10, Vertical Angle = 110


NAT-LED





127


ConstructionHeavy gauge aluminum housing and Sawtooth deflector. Specular hammer-tone reflector. High-reflectivity White pre-painted aluminum finish. Quick-Connect tandem wired as standard feature for easy master/satellite configurations. Optional plastic dust cover also available.

Lamping and BallastSingle or double T5, T5HO or T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and emergency battery options available. Consult factory for ballast availability and specifications.

MountingSuitable for surface mounting in cove or soffit. Continuous-row mounting available featuring Quick-Connect tandem wiring (standard). See Cove Mount Installation sheet and Effective Cove Building Guide for more details on connections and placement recommendations.

Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring Quick-Connect tandem wiring (standard). See lamp measurement chart for more for details.

FinishesHigh-reflectivity White pre-painted aluminum finish is standard. Custom finishes are available - consult factory.



Imagine it...shadow-free cove lighting.

Presenting: ASHLEY - the new reality in effective, uninterrupted diffuse illumination for architectural cove and soffit lighting applications.

Specification-grade fabrication and design are encased within ASHLEY’s minimal-sized profile selection. ASHLEY easily fits into the smallest installations. Our Saw-Tooth Deflector / Hammer-Tone Reflector system combines to provide gorgeous, smooth ceiling illumination or wall-washing without shadows, hot-spots, socket shadow or glare. Continuous runs are simplified with end-to-end mounting knock-outs and pre-installed Quick-Connect thru-wiring as standard features.

With efficient lamping options, precise illumination capabilities, easy installation and a variety of housing profiles, ASHLEY makes it possible to realize better cove lighting - imagine that.


Made in the USA

ASHLEYShadow Free Cove Lighting T5/T5HO/T8

Cove | Soffit

V-0413

Type: Job Name:




128


ASHLEYShadow Free Cove LightingT5/T5HO/T8

Cove | Soffit

ModelASH -

Lamp Type

T5T5HOT8

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’ 4

8 - 8’ 4

CR_1

Continuous Run(runs are made up of 8’ nominalfixturesunlessotherwisespecified)

Voltage

1202773475

Ballast2


DimmingHL3 - Hi-Lume 3DES - EcoSystemESH - EcoSysytem H-Series0-10V - 0-10 Volt

SPECIFICATION CODE

model # of lamps lamp length voltage ballast options

NOTES1 specify length in nominal feet2 consult factory for ballast compatibility3 not available in all lengths, consult factory4 -6’&8’lengthsaremadeupwith(2)3’fixturesor (2)4’fixturesrespectively,pre-wiredfromthefactory -for1-lampincrosssection6’or8’fixturesthetwo fixturesshareaballast -for2-lampincrosssectionversionseachfixture housing has a ballast5 contact factory for availability

6

1 1/

2

# of lamps

1 - 1 lamp2 - 2 lamps

7

2

7

2 1/

2

7

4

Options

PDC - Plastic Dust CoverEM3 - Emergency Battery Pack

ASHLEY in ceiling wash

cove application

ASHLEY in wall wash

soffitapplication

1T51T5HO

1T8

2T52T5HO

2T8

Typicalbeamspreadexamples

*see instruction sheetsandASHLEY“CoveBuilding Guide” for more information

V-0413

Nominal Length Actual Length

T5 T5HO T82 22 1⁄2” 22 1⁄2” 24 1⁄16”3 34 5⁄16” 34 5⁄16” 36 1⁄16”4 46 1⁄8” 46 1⁄8” 48 1⁄16”6 68 5⁄8” 68 5⁄8” 72 1⁄8”8 92 1⁄4” 92 1⁄4” 96 1⁄8”

Dimensions

ASH

http://www.birchwoodlighting.com/products/pdfs/ashley_is.pdf


129


ConstructionHeavy gauge aluminum housing. High-reflectivity White pre-painted aluminum finish. Quick-Connect tandem wired as standard feature for easy master/satellite configurations. Optional plastic dust cover also available.

MountingSuitable for surface mounting in cove or soffit. Continuous-row mounting available featuring Quick-Connect tandem wiring (standard).

Adjustable ThrowTool-less adjustable aiming is performed in up to a full 15 degrees in 5 degree increments for directing the light within the application.



Fixture LengthFixtures are available in nominal lengths of 2, 3, and 4 feet. Continuous run mounting available. See lamp measurement chart for more for details.

OpticsAvailable in Wide or Narrow distribution.

FinishesHigh-reflectivity White pre-painted aluminum finish is standard. Custom finishes are available - consult factory.



Imagine it...shadow-free cove lighting.

Presenting: ASHLEY LED - the new reality in effective, uninterrupted diffuse illumination for architectural cove and soffit lighting applications.

Specification-grade fabrication and design are encased within ASHLEY’s minimal-sized profile selection. ASHLEY easily fits into the smallest installations. Our diffuser and LED engine system combines to provide gorgeous, smooth ceiling illumination or wall-washing without shadows, hot-spots, or glare. Continuous runs are simplified with end-to-end mounting knock-outs and pre-installed Quick-Connect thru-wiring as standard features.

With efficient LED output, precise illumination capabilities, easy installation and adjustable throw, ASHLEY makes it possible to realize better cove lighting - imagine that.


Made in the USA

ASHLEY LEDShadow Free Cove Lighting Narrow Distributed Array

Cove | Soffit

V-0417

Type: Job Name:




130


ASHLEY LEDShadow Free Cove LightingNarrow Distributed Array

Cove | Soffit

ModelASH-LED -

Nominal Length

23 4

CR_1

Continuous Run(runs are made up of 4’ nominalfixturesunlessotherwisespecified)

Voltage

120277

3472

SPECIFICATION CODE

model light color temp optic length voltage driver options engine

V-0417

Dimensions

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Optic

10 - Narrow Distribution80 - Wide Distribution

NOTES1 specify length in nominal feet 2 available for EB, D1, D10 drivers only

15°Rotation

2.35”

7.1”

INTEGRALDRIVER

DIFFUSER LENSREFRACTOR LENS

LED MODULE


LED2 22.5” 3 33.5” 4 44.5”

Set to 0° rotationSet to 15° rotation

Set to 0° rotationSet to 15° rotation

ngle = 0, Vertical Angle = 145



Options


Driver



80 - Wide Distribution 10 - Narrow Distribution

LightEngine


CLO Calculator

LED

ASHLEY (4000K FW lens)

SLO - 115.8lm/[email protected]/ftfixtureinputwatts, 510 lm/ft.HLO-108.8lm/wattdelivered@9w/ftfixtureinputwatts, 980 lm/ft.CLO - refer to CLO CalculatorLED supplement info

ASH-LED





131



Ability is defined as: “competence in doing”. SYDNEY defines ability as our most easily adapted fixture designed to get the job done.

Field-curving telescoping connectors enable flexible, tool-less adjustable spacing at the jobsite for any direction: radius, vertical, horizontal or any compound angle in between. Multiple high-lumen CFL lamp options provide efficiency and “punch” with the (EE) End-to-End module. Precise measurements are not necessary during ordering: specify the run length and we’ll calculate how many modules you’ll need.

SYDNEY removes the hassle with simple on-site adjustability, numerous lamp options and sheer curve-appeal. Light your cove, ceilings and soffit applications the easy way - Complete your spec with SYDNEY.


SYDNEYField-Curvable Fluorescent18W/26W Quad Tube CFL

End-to-End

Made in the USA

ConstructionConstructed of heavy duty aluminum.

Lamping and BallastStandard profile housing for quad tube compact fluorescent lamps. Standard profile housing will accommodate Integral electronic ballast as standard feature. Fixtures are shipped in short, pre-wired runs for easy connection in the field.

MountingSuitable for surface mounting in multiple applications. Ideal for use in cove or soffit.

FinishesHigh-Reflectivity white powder coat finish.

Fixture LengthSpecify overall length desired. Factory will calculate exact run length to meet your specification.

OptionsMounting clip (MC03) provided for extra surface mount stability.


V-0413

Type: Job Name:




132


SYDNEYField-Curvable Fluorescent18W/26W Quad Tube CFL

End-to-End

SPECIFICATION CODE

V-0413

Dimensions

Run Length1

Specify overall run length

Voltage

1202773472

Ballast


DM3 - Dimming

CFLLamps

18Q - G24qbaseCFLlamp

26Q - G24qbaseCFLlamp

Finish

HRW -HighReflectivityWhite (standard)

NOTES1 factory will calculate BOM based on run length2 contact factory for availability3 consult factory for dimming compatibility may result in larger housing

(EE) End-to-End

8”3⁄4”2 3⁄4”

17⁄8”

3 9⁄16”MountingClip:MC03

Radius charts

LAMP UP or DOWN LAMP INSIDE THE RADIUS LAMP OUTSIDE THE RADIUS

minimuminside

EE - 12”

minimumoutsideEE - 16”

minimuminside

EE - 15”


minimuminside

EE - 12”


LampOrientation

EE -End-to-End

model lamps lamp runlength finish voltage ballast orientation

Model

SYD -

SYD


133




Field-curving telescoping connectors enable flexible, tool-less adjustable spacing at the jobsite for any direction: radius, vertical, horizontal or any compound angle in between. Multiple high-lumen CFL lamp options provide efficiency and “punch” in either (OL) over-lapping or (EE) End-to-End modules. Precise measurements are not necessary during ordering: specify the run length and we’ll calculate how many modules you’ll need.



SYDNEYField-Curvable Fluorescent18W - 55W Long Twin Tube CFL

Overlapping | End-to-End

Made in the USA


Lamping and BallastStandard profile housing for long twin tube compact fluorescent lamps. Standard profile housing will accommodate Integral electronic ballast as standard feature. Fixtures are shipped in short, pre-wired runs for easy connection in the field.






SYDNEY is protected under U.S. Patent number 6,702,453

V-1113

Type: Job Name:




134



Overlapping | End-to-End

SPECIFICATION CODE

V-1113

NOTES1 contact factory for availability2 factorywillcalculateBOMbasedonspecifiedrunlength3 consult factory for dimming compatibility may result in larger housing

Dimensions

Run Length2


Voltage

1202773471

Ballast


DM3 - Dimming

Finish


(EE) End-to-End

CFLLamps

18T - 2G11/RS24T - 2G1139T - 2G1140T - 2G11/RS50T - 2G11/RS55T - 2G11

(OL) Overlapping

2 3⁄4”

3 3⁄8”17⁄8”

3⁄4”

3”

4 3⁄4”

17⁄8”

2 3⁄4” 3⁄4”

MountingClip:MC03

Lamp Housing LengthsEE OL11” 8”

13 1⁄2” 10 1⁄2” 17” 14” 23” 20”23” 20”

21 1⁄2” 18 1⁄2”23” 20”

18T 24T39T40T50T55T80T

LampOrientation

EE -End-to-End

OL - Overlapping

Model

SYD -


SYD


135



End-to-End | Overlapping


minimuminside

EE - 16”OL - 12”

minimumoutsideEE - 20”OL - 15”

minimuminside

EE - 19”OL - 25”


minimuminside

EE - 16”OL - 12”


LAMP UP or DOWN

minimuminside

EE - 20”OL - 14”


LAMP INSIDE THE RADIUS

minimuminside

EE - 24”OL - 32”


LAMP OUTSIDE THE RADIUS

minimuminside

EE - 19”OL - 15”


LAMP UP or DOWN

minimuminside

EE - 24”OL - 22”



minimuminside

EE - 31”OL - 38”



minimuminside

EE - 21”OL - 18”


LAMP UP or DOWN

minimuminside

EE - 31”OL - 30”



minimuminside

EE - 37”OL - 50”



minimuminside

EE - 30”OL - 24”


LAMP UP or DOWN

minimuminside

EE - 29”OL - 29”



minimuminside

EE - 36”OL - 49”



minimuminside

EE - 29”OL - 23”


18TRADIUSCHART

24TRADIUSCHART

39TRADIUSCHART

55TRADIUSCHART

40T&50TRADIUSCHARTS

RADIUS CHARTS

Type: Job Name:




136



Application


137




Field-curving telescoping connectors enable flexible, tool-less adjustable spacing at the jobsite for any direction: radius, vertical, horizontal or any compound angle in between. Multiple high-lumen CFL lamp options provide efficiency and “punch” in (EE) End-to-End mount modules. Precise measurements are not necessary during ordering: specify the run length and we’ll calculate how many modules you’ll need.



SYDNEYField-Curvable Fluorescent32W/42W Hexagonal Tube CFL

End-to-End

Made in the USA


Lamping and BallastStandard profile housing for low hexagonal tube compact fluorescent lamps. Standard profile housing will accommodate Integral electronic ballast as standard feature. Fixtures are shipped in short, pre-wired runs for easy connection in the field.







V-0413

Type: Job Name:




138


SYDNEYField-Curvable Fluorescent32W/42W Hexagonal Tube CFL

End-to-End

SPECIFICATION CODE

V-0413

NOTES1 factorywillcalculateBOMbasedonspecifiedrunlength2 contact factory for availability3 consult factory for options may result in larger module size

Dimensions

Run Length1


Voltage

1202773472

Ballast


DM3 - Dimming

CFLLamps

32H - GX24qbaseCFLlamp

42H - GX24qbaseCFLlamp

Finish


3 7⁄8”

1 7⁄8”

3⁄4”

MountingClip:MC03

2 3⁄4”

8”

(EE) End-to-End


minimuminside

EE - 12”


minimuminside

EE - 15”


minimuminside

EE - 12”


Radius charts

LampOrientation

EE -End-to-End

Model

SYD -


SYD


139




Field-curving telescoping connectors enable flexible, tool-less adjustable spacing at the job site for any direction: radius, vertical, horizontal or any compound angle in between. Multiple dimming and kelvin temperature options provide efficiency and “punch” to properly illuminate your applications. Precise measurements are not necessary during ordering: specify the run length and we’ll calculate how many modules you’ll need.

SYDNEY removes the hassle with simple on-site adjustability and sheer curve-appeal. Light your cove, ceilings and soffit applications the easy way - Complete your spec with SYDNEY.


SYDNEY LEDField-Curvable LEDDistributed Array LED

End-to-End

Made in the USA

V-0716

ConstructionConstructed of a die-formed heavy duty aluminum housing with post production powder coat and integral heat sink liner component. Lens is frosted clear extruded acrylic.






MountingMounting clip (MC03) provided for extra surface mount stability and ease of installation. (30T) mounting clip option enables fixture to be mounted at a 30° tilt.



Type: Job Name:




140


SYDNEY LEDField-Curvable LEDDistributed Array LED

End-to-End

SPECIFICATION CODE

V-0716

NOTES1 available for EB, D1, D10 drivers only2 factorywillcalculateBOMbasedonspecifiedrunlengthorradius

Run Length2

Specifyexactrun length or radius

CR_2

Continuous Run

Finish


Dimensions

model light orientation color runlength finish voltage driver option engine temp

Model

SYD-LED -

Orientaton

EE - End-to-End

Voltage

120 277 3471

Option

30T - Mounting Clip with 30° tilt

MC03 - Mounting Clip

4.375”

3.125”

2.875”

2.500”

.750”

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

MC03Mounting Clip

(standard)

30T Mounting Clip with 30° tilt 1/2”

Knockout

1/2”Knockout

Driver

EB - Electronic

DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10V

SYD-LED

LED

LightEngine


CLO Calculator

SYDNEY (4000K FW lens)

SLO - 124.6lm/[email protected]/ftfixtureinputwatts, 548 lm/ft.HLO-117.1lm/wattdelivered@9w/ftfixtureinputwatts, 1054 lm/ft.CLO - refer to CLO CalculatorLED supplement info






141

LampingAvailable with single T5, T5HO or T8 standard linear fluorescent lamps. Integral electronic ballast standard. Dimming and emergency battery options available. Consult factory for ballast availability and specifications.

ConstructionHeavy gauge square extruded aluminum housing. Precision-machined aluminum end-caps. Extruded acrylic or polycarbonate lenses. Stainless steel hardware. Concealed weather-seal gaskets at end caps and lens on all fixtures and at fixture segment joints on continuous runs to meet an IP65 rating. Feed points accept 1⁄2” trade size threaded wet location conduit fittings.

Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths. Continuous run mounting available featuring water-sealed gaskets at fixture segment joints for maintaining Wet Location rating. See installation section for more details.

Finishes(SMT) Silver Matte Texture, (MW) Matte White, or (FB) Flat Black. Other powder coat finishes available. Consult factory for details.

Lens OptionsImpact resistant extruded lenses available in (TRI) Square shaped or (TDW) Teardrop shaped in either Frosted White acrylic (FW), Polycarbonate White (PCW) or Polycarbonate Clear (PCC).

Mounting(SM) Surface Mount may be mounted on ceiling or wall in vertical or horizontal orientation.



BRANDIWet Location LuminaireT5/T5HO/T8

Surface Mount

UL and c-UL listed for wet locations. Made in the USA

V-0617

IP65Rating

Meets or exceeds IP65 rating

TD - Tear Drop LensTRI - Tri-Side Lens

Compact yet thoroughly robust, BRANDI is designed for architectural applications which demand a performance-driven Wet-Location luminaire that can keep the toughest elements out, but hold the most sophisticated style in.

BRANDI’s 2 3⁄4” mounting profile in a Tri-Side or Tear Drop shape lens with concealed weather-sealing features, comprise a luminaire designed to withstand wet outdoor conditions while still blending into the surrounding architecture with ease. Various mounting orientations make installations in hard-to-reach areas less harrowing and allow light delivered almost anywhere: outdoor entrances, under walkways, pergolas or within structural eaves.

Heavy gauge extruded aluminum housing, machined end caps, extruded acrylic, polycarbonate lenses and interior gasketing make BRANDI the perfect choice under the most demanding weather conditions.

Type: Job Name:





142

V-0617

BRANDIWet Location LuminaireT5/T5HO/T8

Surface Mount


BRA-

Voltage

120 277

Options

EM 3 - Emergency Battery (remote)

SPECIFICATION CODE

lamptype length finish feedpoint lens lens voltage ballast mounting option style

NOTES1 specify length in nominal feet, see CRmatrixpage2 contactfactoryforcustomfinish3 EM battery packs are remote mounted along with driver(s) and test switch, consult factory for more info4 each end feed adds 0.5” to overall length5 not available in all lengths6 only available with TD lens option

Lamp Type

T5T5HO T8

Ballast


Dimming5

HL3 - Hi-Lume 3DES - EcoSystemESH - EcoSystem H-SeriesD1 - 1% (nom) 0-10VD10 - 10% 0-10V

Dimensions

2-3/4"

4.0"

2-3/4"

4.0"

TD - Tear Drop Lens TRI - Tri-Side Lens

TD

TRI

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’8 - 8’CR_1

Continuous Run

LensStyle

TD -Tear DropLens

TRI -Tri-SideLens

Finish

Powder CoatSMT - Silver Matte TextureMW - Matte WhiteFB - Flat BlackCUP - Custom2

Mounting

SM - Surface Mount

Lens

FW -Frosted White

PCW -PolycarbonateWhite

PCC6 -PolycarbonateClear

Feed

BK - Back Feed EFL4 - End Feed LeftEFR4 - End Feed RightEF24 - End Feed (both ends)


http://www.birchwoodlighting.com/resources/cr_matrix.html



143

BRANDI LEDWet Location Luminaire

Surface Mount


Compact yet thoroughly robust, BRANDI is designed for architectural applications which demand a performance-driven Wet-Location luminaire that can keep the toughest elements out, but hold the most sophisticated style in.

BRANDI’s 2 3⁄4” mounting profile in a Tri-Side or Tear Drop shape lens with concealed weather-sealing features, comprise a luminaire designed to withstand wet outdoor conditions while still blending into the surrounding architecture with ease. Various mounting orientations make installations in hard-to-reach areas less harrowing and allow light delivered almost anywhere: outdoor entrances, under walkways, pergolas or within structural eaves.

Heavy gauge extruded aluminum housing, machined end caps, extruded acrylic, polycarbonate lenses and interior gasketing make BRANDI the perfect choice under the most demanding weather conditions.

UL and c-UL listed for wet locations. Made in the USA

V-0617

ConstructionHeavy gauge square extruded aluminum housing. Precision-machined aluminum end-caps. Extruded acrylic or polycarbonate lenses. Stainless steel hardware. Concealed weather-seal gaskets at end caps and lens on all fixtures and at fixture segment joints on continuous runs to meet an IP65 rating. Feed points accept 1⁄2” trade size threaded wet location conduit fittings.

Mounting Options(SM) Surface Mount may be mounted on ceiling or wall in vertical or horizontal orientation.




Lens OptionsImpact resistant extruded lenses available in (TRI) Square shaped or (TDW) Teardrop shaped in either Frosted White acrylic (FW), Polycarbonate White (PCW) or Polycarbonate Clear (PCC).

Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths. Continuous run mounting available featuring water-sealed gaskets at fixture segment joints for maintaining wet location rating. See installation section for more details.


IP65Rating

Meets or exceeds IP65 rating

TD - Tear Drop LensTRI - Tri-Side Lens

Type: Job Name:





144

BRANDI LEDWet Location Luminaire

Surface Mount

Dimensions

SPECIFICATION CODE

NOTES1 specify length in nominal feet2 contactfactoryforcustomfinish3 EM battery packs are remote mounted along with driver(s) and test switch, consult factory for more info4 each end feed adds 9/16” to overall length5 only available with TD lens option

BRA-LED

Model

BRA- LED

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’8 - 8’CR_1

Continuous Run

Voltage

120 277

model lightengine colortemp length feed finish lensstyle lens voltage mounting driver options

Lens

FW -Frosted White

PCW -PolycarbonateWhite

PCC5 -PolycarbonateClear

Finish

Powder CoatSMT - Silver Matte TextureMW - Matte WhiteFB - Flat BlackCUP2 - Custom

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Driver


DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10V

Feed

BK - Back Feed EFL4 - End Feed LeftEFR4 - End Feed RightEF24 - End Feed (both ends)

LightEngine

SLO - Standard Lumen OutputHLO - High Lumen OutputCLO__ - Custom Lumen Output

CLO Calculator

LensStyle

TD -TearDrop

TRI -Tri-SideLens

2-3/4"

4.0"

2-3/4"

4.0"

TD - Tear Drop Lens TRI - Tri-Side Lens

TD

TRI

Options

EM3 - Emergency Battery(remote)

HAT - High Ambient Temperature

LED

TD-FW Lens (4000K)

SLO - 110lm/[email protected]/ftfixtureinputwatts,489lm/ft. HLO-99lm/[email protected]/ftfixtureinputwatts,927lm/ft.CLO - refer to CLO Calculator

TRI-FW Lens (4000K)

SLO - 111lm/wattdelivered@405w/ftfixtureinputwatts,494lm/ft. HLO-100lm/[email protected]/ftfixtureinputwatts,937lm/ft.CLO - refer to CLO Calculator

V-0617

Mounting

SM -Surface Mount

BRANDIisratedforoperationwithambienttemperaturesnottoexceed40°C.Usespecificationcode“HAT”forapplicationswhereambientwillbebetween40°and45°C.The“HAT”optionisathermistorwhichwillcontrolinternaltemperaturessoasnottoexceedinternaldevicemaximumtemperature.Atcertaintemperaturethresholds,fixturewilldimlightoutputtokeepinternaltemperatures within the acceptable range. Available for EB, D1 and D10 drivers only, consult factory for more details.



145

ConstructionHeavy gauge square extruded aluminum housing. Precision-machined aluminum end-caps. Extruded acrylic lenses. Stainless steel hardware. Concealed weather-seal gaskets at end caps, lens and power entry on all stand-alone or continuous run fixtures with an IP65 rating. Feed points accept 1⁄2” trade size threaded wet location conduit fittings.

LampingT5, T5HO or T8 linear fluorescent lamp compatible. Integral electronic ballast is standard. Dimming ballasts available; consult factory for compatibility.

Mounting Options(CSS) Cable Suspension System field adjustable 1⁄16” aircraft cable, (WM) Wall Mount, (REC) Recessed or (CM) Ceiling Mount.

Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths. Continuous run mounting available featuring water-sealed gaskets within knock-outs for maintaining WL rating. See installation section for more details.

Acrylic Lens Options(FW) Frosted White impact resistant extruded lens.




VANESSA combines high-end architectural styling with precision engineering to create a strong, elegant wet-location luminaire designed to complement wet exterior or interior installations.

Weather-sealing prevents water and moisture from entering the lens, power entry points and end-caps. Constructed of heavy gauge extruded aluminum, precision machined smooth end-caps and extruded acrylic lenses, VANESSA is built to last while withstanding elements associated with wet-location applications.

VANESSA is available as LED and single or double T5 or T8, or single T5HO linear fluorescent lamps. 2’, 3’, 4’, 6’ and 8’ nominal lengths are standard, continuous runs are available.

VANESSAWet Location LuminaireT5/T5HO/T8

Ceiling Mount | Wall Mount | CSS

V-0217

UL and c-UL listed for wet locations.

Made in the USAIP65Rating

Type: Job Name:





146

VANESSAWet Location LuminaireT5/T5HO/T8


see option sheet for details

Dimensions

VAN-400

Model

VAN-400

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’68 - 8’6CR_1

Continuous Run

Voltage

120 277

SPECIFICATION CODE

model lamptype length distribution mounting feed finish lens voltage ballast standard standard option cable cord color length

NOTES1 specify length in nominal feet 2 contactfactoryforcustomfinish3 see options for non-standard selections4 EM’s are remote mounted along with the test switch in a dry location, consult factory for more info5 for WM or CM only6 6’&8’lengthsaremadeupwith(2)3’fixturesor(2)4’fixturesrespectively

Lens

FW - Frosted White

Lamp Type

1-T51-T5HO 1-T8

2-T52-T8

Ballast



4”

4”

1” stando� from ceiling1” stando� from wall(standard)

RightFeed(EFR)

LeftFeed(EFL)

Mounting Bracket(Wall Mount)

Lens

LensLens

Standard Top FeedCord Grip/SO Cord

Finish

SMT - Silver MatteTextureMW - Matte WhiteFB - Flat BlackCUP2 - Custom



CSS Options

Options

CSS3 - Cable LengthCSS3 - Power Cord Color

EM4 - Emergency Inverter


Mounting


WM - Wall Mount

CM - Ceiling Mount

REC -Recessed

Mounting

WM - Wall Mount CM - Ceiling Mount

CSS

Standard Ceiling Feed

Standard WallFeed

V-0217

CSS - Cable Suspended System

Distribution

DR - Direct

Feed

STND - Standard EFL5 - End Feed LeftEFR5 - End Feed RightEF25 - End Feed (both ends)JBE5 - J-boxextender

CM - Ceiling Mount

4.500

4.125

.500

REC - Recessed

4”

4”


RightFeed(EFR)

LeftFeed(EFL)


Lens

LensLens





147

ConstructionHeavy gauge square extruded aluminum housing. Precision-machined aluminum end-caps. Extruded acrylic lenses. Stainless steel hardware. Concealed weather-seal gaskets at end caps, lens and power entry on all stand-alone or continuous run fixtures with an IP65 rating. Feed points accept 1⁄2” trade size threaded wet location conduit fittings.

Mounting Options(CSS) Cable Suspension System field adjustable 1⁄16” aircraft cable, (WM) Wall Mount, (REC) Recessed or (CM) Ceiling Mount.

Finishes(SL) Silver Matte Texture, (MW) Matte White, or (FB) Flat Black. Other powder coat finishes available. Consult factory for details.



Acrylic Lens Options(FW) Frosted White impact resistant extruded lens.

Fixture LengthFixtures are available in 2’, 3’, 4’, 6’ and 8’ nominal lengths. Continuous run mounting available featuring water-sealed gaskets within knock-outs for maintaining WL rating. See installation section for more details.




Weather-sealing prevents water and moisture from entering the lens, power entry points and end-caps. Constructed of heavy gauge extruded aluminum, precision machined smooth end-caps and extruded acrylic lenses, VANESSA is built to last while withstanding elements associated with wet-location applications.

VANESSA is available as LED and single or double T5 or T8, or single T5HO linear fluorescent lamps. 2’, 3’, 4’, 6’ and 8’ nominal lengths are standard, continuous runs are available.

VANESSA LEDWet Location LuminaireDistributed Array LED


V-0217



Type: Job Name:





148

V-0217

VANESSA LEDWet Location LuminaireDistributed Array LED



Dimensions

VAN-LED-400

Model

VAN- LED-400

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’68 - 8’6CR_1

Continuous Run

Voltage

120 277 3474

SPECIFICATION CODE

model lightengine colortemp length distribution mounting feed finish lens voltage driver standard standard option option cable cord color length

NOTES1 specify length in nominal feet 2 contactfactoryforcustomfinish3 see options for non-standard selections4 available for EB, D1, D10 drivers only5 EM’s are remote mounted along with the test switch in a dry location, consult factory for more info66’&8’lengthsaremadeupwith(2)3’fixturesor(2)4’fixturesrespectively7 direct (DR) distribution only

VANESSAisratedforoperationwithambienttemperaturesnottoexceed40°C.Usespecificationcode“HAT”forapplicationswhereambientwillbebetween40°and45°C.The“HAT”optionisathermistorwhichwillcontrolinternaltem-peraturessoasnottoexceedinternaldevicemaximumtemperature.Atcertaintemperaturethresholds,fixturewilldimlightoutputtokeepinternaltempera-tures within the acceptable range. Available for EB, D1 and D10 drivers only, consult factory for more details.

Lens

FW -Frosted White

Finish

Powder CoatSMT - Silver Matte TextureMW - Matte WhiteFB - Flat BlackCUP2 - Custom

Options

CSS3 - Cable LengthCSS3 - Power Cord Color


HAT7 - High Ambient Temperature


Mounting


WM - Wall Mount

CM - Ceiling Mount

REC - Recessed

Mounting


CSS

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Driver


DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10V

4”

4”


Lens Lens

RightFeed(EFR)

LeftFeed(EFL)


Lens


Standard Wall Feed



CSS Options


Cord Grip/SO Cord(End Feed)

CSS - Cable Suspension System

Feed

STND - Standard EFL5 - End Feed LeftEFR5 - End Feed RightEF25 - End Feed (both ends)JBE5 - J-boxextender

Distribution

DR - Direct

LED

LightEngine


CLO Calculator

VAN-LED-400 (4000K FW lens)

SLO - 89.4 lm/watt delivered @ 4.4 w/ft consumed watts, 393 lm/ft.HLO - 84 lm/watt delivered @ 9 w/ft consumed watts, 756 lm/ft.CLO - refer to CLO CalculatorLED supplement info

CM - Ceiling Mount


4.500

4.125

.500

REC - Recessed







149

ConstructionHeavy gauge square extruded aluminum housing. Precision-machined aluminum end-caps. Extruded acrylic clear lens. Stainless steel hardware. Concealed weather-seal gaskets at end caps, lens and power entry on all stand-alone or continuous run fixtures with an IP65 rating. Feed points accept 1⁄2” trade size threaded wet location conduit fittings.

Mounting(WM) Wall Mount, (REC) Recessed.




Acrylic LensClear impact resistant extruded lens.

Fixture LengthFixtures are available in 2’ - 4’ nominal lengths. Continuous run mounting available featuring water-sealed gaskets within knock-outs for maintaining WL rating. See installation section for more details.




The IP65 rated VANESSA Wall Graze delivers smooth and even illumination that reveals and accentuates texture with highlights and shadows to the desired space. Weather-sealing prevents water and moisture from entering the lens, power entry points and end-caps. Constructed of heavy gauge extruded aluminum, precision machined smooth end-caps and extruded acrylic lenses, VANESSA Wall Graze is built to last while withstanding elements associated with wet-location applications.

2 - 4 foot nominal lengths standard, continuous runs are available.

VANESSA LEDWall GrazeWet Location Luminaire

Wall Mount | Recessed

V-1216



Type: Job Name:





150

V-1216

VANESSA LEDWall GrazeWet Location Luminaire

Wall Mount | Recessed


Dimensions

VAN-LED-WG-400

Model

VAN-LED-WG-400

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’58 - 8’5CR_1

Continuous Run

Voltage

120 277 3473

SPECIFICATION CODE

model lightengine colortemp length mounting feed finish voltage driver option option

NOTES1 specify length in nominal feet 2 contactfactoryforcustomfinish3 available for EB, D1, D10 drivers only4 EM’s are remote mounted along with the test switch in a dry location, consult factory for more info56’&8’lengthsaremadeupwith(2)3’fixturesor(2)4’fixturesrespectively


Finish


Options



Mounting

WM - Wall Mount

REC - Recessed

Mounting


ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Driver


DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10V

4”

4”


Lens Lens

RightFeed(EFR)

LeftFeed(EFL)


Lens


Standard Wall Feed

Feed

STND - Standard EFL - End Feed LeftEFR - End Feed RightEF2 - End Feed (both ends)JBE - J-boxextender

LightEngine


CLO Calculator

Maximum Candela = 1033.04 Located At Horizontal Angle = 10, Vertical Angle = 10# 1 - Vertical Plane Through Horizontal Angles (0 - 180)

1


Photometrics

4.500

4.125

.500

REC - Recessed

LED

VAN-LED-WG-400 (4000K FW lens)

SLO - 85 lm/watt delivered @ 4.4 w/ft consumed watts, 374 lm/ft.HLO - 79.9 lm/watt delivered @ 9 w/ft consumed watts, 719 lm/ft.CLO - refer to CLO CalculatorLED supplement info







151

ConstructionHeavy gauge square extruded aluminum housing. Precision-machined aluminum end-caps. Extruded acrylic clear lens. Stainless steel hardware. Concealed weather-seal gaskets at end caps, lens and power entry on all stand-alone or continuous run fixtures with an IP65 rating. Feed points accept 1⁄2” trade size threaded wet location conduit fittings.

Mounting(CM) Ceiling Mount, (CSS) Cable Suspended and (REC) Recessed.

Finishes(SL) Silver, (MW) Matte White, or (FB) Flat Black. Other powder coat finishes available. Consult factory for details.



Acrylic LensClear impact resistant extruded lens.

Fixture LengthFixtures are available in 2’ - 4’ nominal lengths. Continuous run mounting available featuring water-sealed gaskets within knock-outs for maintaining WL rating. See installation section for more details.




The IP65 rated VANESSA Wall Wash delivers smooth and even illumination that reveals, accentuates and highlights wall features. Weather-sealing prevents water and moisture from entering the lens, power entry points and end-caps. Constructed of heavy gauge extruded aluminum, precision machined smooth end-caps and extruded acrylic lenses, VANESSA Wall Wash is built to last while withstanding elements associated with wet-location applications.

2 - 4 foot nominal lengths standard, continuous runs are available.

VANESSA LEDWall WashWet Location Luminaire

Ceiling Mount | CSS | Recessed

V-1216



Type: Job Name:





152

V-1216




Dimensions

VAN-LED-WW-400

Model

VAN-LED-WW-400

Nominal Length

2 - 2’3 - 3’4 - 4’6 - 6’58 - 8’5CR_1

Continuous Run

Voltage

120 277 3473

SPECIFICATION CODE

model lightengine colortemp length mounting feed finish voltage driver option option

NOTES1 specify length in nominal feet 2 contactfactoryforcustomfinish3 available for EB, D1, D10 drivers only4 EM’s are remote mounted along with the test switch in a dry location, consult factory for more info56’&8’lengthsaremadeupwith(2)3’fixturesor(2)4’fixturesrespectively


Finish


Options



Mounting

CM - Ceiling Mount


REC - Recessed

Mounting

CM - Ceiling Mount

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

Driver


DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10V

4”

4”

1” stando� from ceilingLens

RightFeed(EFR)

LeftFeed(EFL)

Lens


Feed

STND - Standard EFL - End Feed LeftEFR - End Feed RightEF2 - End Feed (both ends)JBE - J-boxextender

LightEngine


CLO Calculator

4.500

4.125

.500

REC - Recessed4”

4”

1” stando� from ceilingLens

RightFeed(EFR)

LeftFeed(EFL)


Lens

LED

VAN-LED-WW-400 (4000K FW lens)

SLO - 55.7 lm/watt delivered @ 4.4 w/ft consumed watts, 245 lm/ft.HLO - 52.3 lm/watt delivered @ 9 w/ft consumed watts, 471 lm/ft.CLO - refer to CLO CalculatorLED supplement info







153

1

Gridscale = 1.0 ft per increment

40.0 fc1.0 fc 2.0 fc 5.0 fc 10.0 fc 20.0 fc

1

Gridscale = 1.0 ft per increment

40.0 fc1.0 fc 2.0 fc 5.0 fc 10.0 fc 20.0 fc



V-1215


1


Photometrics

Fixtureismountedat8’heightand3’fromthewall

Type: Job Name:





154




155



With a vast assortment of ultra-minimal housing profiles that can accommodate T5/T5HO or T8 linear fluorescent lamps, WP SYSTEM Specification Grade Strip fixtures are the perfect choice when less is best.

Choose from many styles, including: side mount, diagonal, adjustable staggered or individual modules in shorter lengths. Whatever your specification requires, WP SYSTEM fixtures can deliver strong light while providing durability and value to any interior project: commercial, architectural, residential or retail.

Reflectors and various accessories (on some models) combined with dimming capabilities, or emergency battery options complete the make-up for one of our most popular and enduring product lines.


WP SYSTEMStandard Strip ProfileT5/T5HO or T8

Multi-Application/Reflectors

Made in the USA

ConstructionDie-formed heavy duty 20 gauge steel construction. Post-formed high reflectivity white powder coat finish provides smooth edges, rust-resistance and even coverage on entire fixture.

Lamping and BallastSingle or Double T5/T5HO or Single or Double T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and (EM) Emergency battery pack options available. Consult factory for availability and specifications.

FinishesPost-formed high-reflectivity white powder coat finish. Custom colors available - consult factory.

MountingSuitable for surface mounting in multiple applications. May be used in cove or soffit. Compatible for field thru-wiring.

ReflectorsMultiple reflector options available: (AR1) Asymmetric Straight, (AR2) Asymmetric Angled, (AAR) Asymmetric Adjustable, and (SR) Symmetric.

Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting and thru-wire compatibility.


V-0915

Type: Job Name:




156


WP-

WP SYSTEMStandard Strip ProfileT5/T5HO or T8


SPECIFICATION CODE

lamps model length finish voltage ballast options options

Dimensions

Model

S - Standard ProfileLinearFluorescent

Nominal Length

standard2 - 2’3 - 3’ 4 - 4’64 - 6’ 84 - 8’CR_Continuous Run2

Voltage1

120277

Ballast


DimmingHL3 - Hi-LumeES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

NOTES1 other voltages available, consult factory 2 CRfixturesarefieldthru-wirecompatible3 Available with 1 lamp cross section only4 -6’&8’lengthsaremadeupwith(2)3’fixturesor (2)4’fixturesrespectively,pre-wiredfromthefactory -for1-lampincrosssection6’or8’fixturesthetwo fixturesshareaballast -for2-lampincrosssectionversionseachfixture housing has a ballast5 not available in all lengths, consult factory6 notavailablewithreflectoroption

Lamps

standardT5T5HOT82T52T5HO2T8

Finish


CUP - Custom Paint

Options

AR1 - AsymmetricReflectorStraightAR2 - AsymmetricReflectorAngledAAR3 - AsymmetricReflectorAdjustableSR - SymmetricReflectorEM5 - Emergency Battery PackWGL6 - Wire Guard LinearLS - Protective Lamp Sleeve

Nominal Length Actual Lengths

T5 T5HO T82 22 7⁄16” 22 7⁄16” 24”3 34 1⁄4” 34 1⁄4” 36”4 46 1⁄16” 46 1⁄16” 48”6 68 1⁄2” 68 1⁄2” 72”8 92 1⁄8” 92 1⁄8” 96”

V-0915

T8-S

2T8-S

2T5/2T5HO-S

AR1 SR AR2 AAR

2 3⁄4”

1 7⁄8”

11⁄2”

2 3⁄4”

2 1⁄8”

3 1⁄4”

2 1⁄2”

3 1⁄4”

3 1⁄8”

3 5⁄8

4 1⁄4”

3”

3 1⁄4” 3 1⁄4”

4”

11⁄2”

5”

4 1⁄16”

3”

2 3⁄8” 2 3⁄8”

3 5⁄8”

3 5⁄16”

30°

11⁄4”

2 3⁄8”

T5/T5HO-S

2 1⁄8” 2 3⁄8” 2 3⁄8” 2 13⁄16”

1 1⁄4”

11⁄2”

2 1⁄4”2 3⁄16”

T8-S

T5-S

30°

4 1⁄16”

2”

2”


157



With a vast assortment of ultra-minimal housing profiles that can accommodate T5/T5HO or T8 linear lamps, WP SYSTEM Specification Grade Strip fixtures are the perfect choice when less is best.




WP SYSTEMStandard Profile Staggered StripsSingle or Double T5/T5HO or T8

Integral Ballast Staggered Strip

Made in the USA


Lamping and BallastSingle or double T5, T5HO or T8 linear staggered fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and (EM) Emergency battery pack options available. Consult factory for availability and specifications.





V-0613

Type: Job Name:




158


WP-

WP SYSTEMStandard Profile Staggered StripsSingle or Double T5/T5HO or T8

Integral Ballast Staggered Strip

SPECIFICATION CODE

V-0613

lamps model length finish voltage ballast options

Dimensions

Model

1ST3 -1 lamp3” Staggeredin cross section

1ST4 -1 lamp4 1/2” Staggeredin cross section

1ST6 -1 lamp6” Staggeredin cross section

2ST3 -2 lamps 3” Staggeredin cross section

Nominal Length

2 - 2’3 - 3’4 - 4’63 - 6’83 - 8’

CR_Continuous Run2

Voltage1

120277

Ballast

EB - Integral Electronic(standard)DimmingHL3 - Hi-Lume5

ES - EcoSystem5

ESH - EcoSystem H-Series5

0-10V - 0-10V

Lamps

T5T5HOT8

Options

EM4 - Emergency Battery PackWGL - Wire Guard LinearLS - Protective Lamp Sleeve

Finish


CUP - Custom Paint

NOTES1 other voltages available, consult factory for options 2 CRfixturesarefieldthru-wirecompatible3 -6’&8’lengthsaremadeupwith(2)3’fixturesor (2)4’fixturesrespectively,pre-wiredfromthefactory -for1-lampincrosssection6’or8’fixturesthetwo fixturesshareaballast -for2-lampincrosssectionversionseachfixture housing has a ballast4 not available in all lengths, consult factory for options5 not available on 2’ 1ST T5/T5HO

2 1⁄8”

2 1⁄8”

2 3⁄4”

2 3⁄4”

1 1⁄4”

2 1⁄2”

2 3⁄4”

1 1⁄4”

1 3⁄8”

1 3⁄8”

T5/T5HO 1ST

T5/T5HO 2ST

T8 1ST

T8 2ST

6” 6”

6” 6”

3”

3”

3”

3”

2 1⁄2”

2 1⁄2”

2 3⁄4”

2 3⁄4”

2 1⁄2”

2 3⁄4”

Overlapvariableinthefieldto3”,4 1⁄2” or 6” on 1ST models

Overlapvariableinthefieldto3”,4 1⁄2” or 6” on 1ST models

Nominal Length Fixture Lengths

1ST3 (1 lamp) 1ST4 (1 lamp) 1ST6 (1 lamp) 2ST3 (2 lamp) T5/T5HO T8 T5/T5HO T8 T5/T5HO T8 T5/T5HO T82 22 7⁄16” 24” 22 7⁄16” 24” 22 7⁄16” 24” 25 7⁄16” 27”3 34 1⁄4” 36” 34 1⁄4” 36” 34 1⁄4” 36” 37 1⁄4” 39”4 46 1⁄16” 48” 46 1⁄16” 48” 46 1⁄16” 48” 49 1⁄16” 51”6 65 1⁄2” 69” 64” 67 1⁄2” 62 1⁄2” 66” 71 1⁄2” 75”8 89 1⁄8” 93” 87 5⁄8” 91 1⁄2” 86 1⁄8” 90” 95 1⁄8” 99”

1 ST

2 ST

6’ & 8’ lengths

1 ST

2 ST

6’ & 8’ lengths

6’ & 8’ lengths

6’ & 8’ lengths


159







WP SYSTEMSliding Adjustable StaggeredSingle or Double T5/T5HO or T8

Multi-Application Sliding Strip

Made in the USA


Lamping and BallastSingle or double T5, T5HO or T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and (EM) Emergency battery pack options available. Consult factory for availability and specifications.


MountingSuitable for surface mounting in multiple applications. Ideal for cove or soffit. Compatible for field thru-wiring.

Fixture LengthFixtures are available in nominal lengths of 2, 3, and 4 feet. Continuous run mounting and thru-wire compatibility.


V-0613

Type: Job Name:




160


WP-

WP SYSTEMSliding Adjustable StaggeredSingle or Double T5/T5HO or T8

Multi-Application Sliding Strip

SPECIFICATION CODE

V-0613


Dimensions

Model

1STSAS - 1 Lamp Sliding Adjustable Stagger

2STSAS - 2 Lamp Sliding Adjustable Stagger

Nominal Length

2 - 2’3 - 3’ 4 - 4’

CR_Continuous Run2

Voltage1

120277

Ballast

EB - Electronic(standard)DimmingHL3 - Hi-LumeES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Lamps

T5T5HOT8

Options

EM3 - Emergency Battery PackLS - Protective Lamp Sleeve

Finish


CUP - Custom Paint

NOTES1 other voltages available, consult factory 2 CRfixturesarefieldthru-wirecompatible3 not available in all lengths, consult factory

1STSAS or 2STSAS T5/T5HO

1STSAS T5/T5HO extension table

2STSAS T5/T5HO extension table

1STSAS T8 extension table

2STSAS T8 extension table

Nominal Min/Max LengthsT5 or T5HO Min Max

2’ 31 1⁄2” 41” 3’ 49 1⁄4” 64 1⁄2” 4’ 67” 88 1⁄4”

Nominal Min/Max LengthsT5 or T5HO Min Max

2’ 22 7⁄16” 32 1⁄8” 3’ 34 1⁄4” 49 7⁄8” 4’ 46 1⁄16” 67 9⁄16”

Nominal Min/Max LengthsT8 Min Max2’ 34 1⁄2” 44 1⁄2” 3’ 52 1⁄2” 68 1⁄2” 4’ 70 1⁄2” 92 1⁄2”

Nominal Min/Max LengthsT8 Min Max2’ 24” 34 3⁄4” 3’ 36” 52 3⁄4” 4’ 48” 70 3⁄4”

2 1⁄8”

1 1⁄4”

2 1⁄2”

2 3⁄4”

1 1⁄2”

3 1⁄8”

1STSAS or 2STSAS T8

MINIMUM

MAXIMUM

MINIMUM

MAXIMUM

1STSAS T5/T5HO/T8 2STSAS T5/T5HO/T8

3⁄8” trade size knockout 3⁄8” trade size knockout


161







WP SYSTEMDiagonal Staggered StripSingle T5/T5HO or T8

Integral Ballast Diagonal Staggered Strip

Made in the USA

ConstructionDie-formed heavy duty 20 gauge steel construction. Post-formed High Reflectivity white powder coat finish provides smooth edges, rust-resistance and even coverage on entire fixture.

Lamping and BallastSingle T5, T5HO or T8 linear staggered fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and (EM) Emergency battery pack options available. Consult factory for availability and specifications.





V-0613

Type: Job Name:




162


WP-

WP SYSTEMDiagonal Staggered StripSingle T5/T5HO or T8

Integral Ballast Diagonal Staggered Strip

SPECIFICATION CODE

V-0613

Model

DS -1 lamp DiagonalStaggeredin cross section

Nominal Length

2 - 2’3 - 3’4 - 4’63 - 6’83 - 8’

CR_Continuous Run2

Voltage1

120277

Ballast

EB - Integral Electronic(standard)

DimmingHL3 - Hi-LumeES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V


NOTES1 other voltages available, consult factory 2 CRfixturesarefieldthru-wirecompatible.3 6’lengthsaremadeupwith(2)3’fixturessharingaballast 8’lengthsaremadeupwith(2)4’fixturessharingaballast both are pre-wired from the factory4 not available in all lengths, consult factory

Lamps

T5T5HOT8

Options


Finish


CUP - Custom Paint

Dimensions

1T5/T5HO DS

1T8 DS

2 1⁄8”1 1⁄4”

2 3⁄4”

3”

3”

1 1⁄2”

2 13⁄16”


T5 T5HO T82 22 3⁄4” 22 3⁄4” 24 3⁄8”3 34 9⁄16” 34 9⁄16” 36 3⁄8”4 46 3⁄8” 46 3⁄8” 48 3⁄8”6 661⁄8” 661⁄8” 69 3⁄4”8 893⁄4” 893⁄4” 933⁄4”

Example of 1 or 2 lamp section

3”

2’,3’,4’FixtureLength(seechartabove)

6’,8’FixtureLength(seechartabove)

NOTE:Otherstaggeredlengthsareavailable,pleaseconsultfactory

DS


163







WP SYSTEMSingle or Double Side MountSingle or Double T5/T5HO or T8

Multi-Application Side Mount

Made in the USA


Lamping and BallastSingle or double side mount T5, T5HO or T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and (EM) Emergency battery pack options available. Consult factory for availability and specifications.





V-0613

Type: Job Name:




164


WP-

WP SYSTEMSingle or Double Side MountSingle or Double T5/T5HO or T8

Multi-Application Side Mount

SPECIFICATION CODE

V-0613


Dimensions

Model

SSM - 1 LampSingle Side Mount

DSM - 2 LampsDouble Side Mount

Nominal Length

2 - 2’3 - 3’ 4 - 4’63 - 6’ 83 - 8’

CR_Continuous Run1

Voltage2

120277

Ballast

EB - Electronic(standard)DimmingHL3 - Hi-LumeES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

NOTES1 CRfixturesarefieldthru-wirecompatible 2 other voltages available, consult factory3 -6’&8’lengthsaremadeupwith(2)3’fixturesor (2)4’fixturesrespectively,pre-wiredfromthefactory -for1-lampincrosssection6’or8’fixturesthetwo fixturesshareaballast -for2-lampincrosssectionversionseachfixture housing has a ballast4 not available in all lengths, consult factory

Lamps

T5T5HOT8

Options


Finish


CUP - Custom Paint

SSM 1T5 / T5HO

SSM 1T8

DSM2T5 / T5HO

DSM 2T8

1 1⁄4”

1 7⁄8”

2 3⁄4”

1 1⁄4”

1 7⁄8”

3 3⁄4”

1 1⁄4”

1 7⁄8”

3 1⁄8”

1 1⁄4”

1 7⁄8”

4 1⁄2”

Nominal Length

Actual LengthsSSM / DSM

T5 T5HO T82 22 7⁄16” 22 7⁄16” 24”3 34 1⁄4” 34 1⁄4” 36”4 46 1⁄16” 46 1⁄16” 48”6 68 1⁄2” 68 1⁄2” 72”8 92 1⁄8” 92 1⁄8” 96”


165







WP SYSTEMLow Profile Strip FixtureSingle or Double T5/T5HO or T8


Made in the USA


Lamping and BallastSingle or Double T5/T5HO or T8 linear fluorescent lamps in cross section. Remote electronic ballast standard. Dimming and (EM) Emergency battery pack options available. Consult factory for availability and specifications.


MountingSuitable for surface mounting in multiple applications. May be used in cove or soffit.

ReflectorsMultiple reflector options available: (AR1) Asymmetric Straight, (AR2) Asymmetric Angled, (AAR) Asymmetric Adjustable, and (SR1) Symmetric.

Fixture LengthT5/T5HO & T8 Linear fluorescent fixtures are available in nominal lengths of 2, 3 and 4 feet.


V-0613

Type: Job Name:




166


WP-

WP SYSTEMLow Profile Strip FixtureSingle or Double T5/T5HO or T8


SPECIFICATION CODE

V-0613


Dimensions

Model

LP - LowProfile

Nominal Length

2 - 2’3 - 3’ 4 - 4’

Voltage1

120277

Ballast

EB3 - Electronic(standard)

Dimming4

HL3 - Hi-LumeES - EcoSystemESH - EcoSystem H-Series0-10V - 0-10V

Lamps

T5T5HOT82T52T5HO2T8

Options

AR1 - AsymmetricReflectorStraightAR2 - AsymmetricReflectorAngledAAR2 - AsymmetricReflectorAdjustableSR1 - SymmetricReflectorEM - Emergency Battery PackLS - Protective Lamp Sleeve

Finish


CUP - Custom Paint

1T8 LP

1T5 LP

2T8 LP

2T5/2T5HO LP

1 5⁄8”3⁄8”

1 1⁄2”

2”

2 1⁄8”

2”

2 1⁄8” 2 1⁄8”

3⁄8”

3⁄8”

3⁄8”

2 1⁄2” 3”

1 1⁄4”

1 1⁄4”

1 1⁄2” 1 1⁄2”

1 1⁄2” 1 1⁄2”

3 1⁄8”

1 7⁄8” 2 1⁄4”

2” 3 3⁄16”

3”

1”

4” 5”2 15⁄16”

2 5⁄16”3 5⁄8”3”

2 3⁄8”

30°

30°

AR1 SR1 AR2

AAR

AAR

SR1AR1 AR2

1 5⁄8”

NOTES1 other voltages available, consult factory2 onlyavailablewith1lampcrosssectionfixtures3 standard lead length is 9’ for electronic ballasts consult factory for other4 severe lead length restrictions on dimming ballasts consult factory

Nominal Length Actual Lengths (1LP/2LP)

T5 T5HO T82 24 15⁄16” 24 15⁄16” 26 9⁄16”3 36 3⁄4” 36 3⁄4” 38 9⁄16”4 48 9⁄16” 48 9⁄16” 50 9⁄16”

3/8” flex connector provided by factory

length


167







WP SYSTEMMini Profile Strip FixturesSingle T5/T5HO or T8

Multi-Application / Reflectors

Made in the USA


Lamping and BallastSingle T5/T5HO or T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. Dimming available on (MD) Mini Dimmable models only. (EM) Emergency battery pack options available. Consult factory for availability and specifications.

FinishesPost-formed high-reflectivity white powder coat finish. Custom finishes are available - consult factory.


ReflectorsMultiple reflector options available: (AR1) Asymmetric Straight, (AR2) Asymmetric Angled, (AAR) Asymmetric Adjustable, and (SR) Symmetric.

Fixture LengthT5/T5HO & T8 Linear fluorescent fixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting and thru-wire compatibility. Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.

V-0613

Type: Job Name:




168


WP-

WP SYSTEMMini Profile Strip FixturesSingle T5/T5HO or T8

Multi-Application / Reflectors

SPECIFICATION CODE


Dimensions

Model

M7 - MiniProfile

MD5 - Mini Dimmable

Nominal Length

2 - 2’3 - 3’ 4 - 4’63 - 6’ 83 - 8’

CR_1

Continuous Run

Voltage2

120277

Ballast


Dimming6


Lamps

T5T5HOT8

Options

AR1 - AsymmetricReflectorStraightAR2 - AsymmetricReflectorAngledAAR - AsymmetricReflectorAdjustableSR - SymmetricReflectorEM4 - Emergency Battery PackLS - Protective Lamp SleeveMC03- Surface Side Mounting Clip

Finish


CUP - Custom Paint

NOTES1 CRfixturesarefieldthru-wirecompatible2 other voltages available, consult factory3 6’lengthsaremadeupwith(2)3’fixturessharingaballast 8’lengthsaremadeupwith(2)4’fixturessharingaballast both are pre-wired from the factory4 not available in all lengths, consult factory5 not available with T86 not available in M housing7 6’lengthsaremadeupwith(2)3’fixtureseachwithaballast 8’lengthsaremadeupwith(2)4’fixtureseachwithaballast

T5M

T8M

T5/T5HO MD

1 7⁄8”

2 1⁄4” 2 11⁄16”

2 3⁄8”

1 1⁄4”

1”

1 1⁄8”

1 1⁄2”

1 1⁄4”2 1⁄8”

1 1⁄2”

2 1⁄8”

1 7⁄8”

2 1⁄8”

2 3⁄16”

2 1⁄4”

AR1 SR AR2 AAR

T8M

T5/T5HO MD

2 1⁄8”2 9⁄16”

3 13⁄16”

2 11⁄16”

3 1⁄8”

3 1⁄4”3 7⁄8”

2 3⁄8”

2 1⁄4”

2 13⁄16”4 1⁄16”

T5M

30°

30°

30°


T5 T5HO T82 22 7⁄16” 22 7⁄16” 24 1⁄16”3 34 1⁄4” 34 1⁄4” 36 1⁄16”4 46 1⁄16” 46 1⁄16” 48 1⁄16”6 68 1⁄2” 68 1⁄2” 72 1⁄8”8 92 1⁄8” 92 1⁄8” 96 1⁄8”

V-0613


169





Acrylic lenses of White, Clear Prismatic or Clear offer variety for delivering illumination, and combined with dimming capabilities, or emergency battery options complete the make-up for one of our most popular and enduring product lines.


WP SYSTEMSingle Lamp Acrylic LensT5/T5HO or T8

Multi-Application Surface Mount

Made in the USA

ConstructionDie-formed heavy duty 20 gauge steel construction. Post-formed high reflectivity white powder coat finish provides smooth edges, rust-resistance and even coverage on entire fixture. End caps are smooth as standard. Knock-outs on end caps are stamped as optional (KO).

Lamping and BallastSingle T5, T5HO or T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. (EM) Emergency battery pack options available. Consult factory for availability and specifications.


MountingSuitable for surface mounting in multiple applications. Ideal as low profile interior fixture. ADA compliant. Compatible for field thru-wiring.

LensesSnap on acrylic lenses are available as (ACW) White, (ACC) Clear, or (ACP) Clear Prismatic.

Fixture LengthFixtures are available in nominal lengths of 2, 3, and 4 feet.


V-1112

Type: Job Name:




170


WP-

WP SYSTEMSingle Lamp Acrylic LensT5/T5HO or T8


SPECIFICATION CODE

V-1112

lamps/model length finish knockouts lens voltage ballast option

Dimensions

Lens

ACW - WhiteACC - ClearACP - Clear Prismatic

Nominal Length

2 - 2’3 - 3’ 4 - 4’

Voltage1

120277

Ballast


Dimming3


NOTES1 other voltages available, consult factory2 only available in 4’ or longer3 notavailableonT5Mfixture

Lamps/Model

T5MMiniProfile

T5MD - Mini DimmableProfile

T5HOMD - Mini DimmableProfile

T8S - StandardProfile

Option

EM2,3 - Emergency Battery Pack

Finish

HRW - High ReflectivityWhite(standard)

CUP - Custom Paint

SingleLampAcrylicLensProfile

2 3⁄16”

1 9⁄16”

2 9⁄16”

1 7⁄8”2 3⁄16”

3 1⁄2”

T5MMini Profile

T5MD / T5HOMini Dimmable Profile

T8SStandard Profile


T5 T5HO T82 22 9⁄16” 22 9⁄16” 24 1⁄8”3 34 5⁄16” 34 5⁄16” 36 1⁄8”4 46 3⁄16” 46 3⁄16” 48 1⁄8”

Optional Knock Out

LampLamp

Lamp

KnockOuts

NKO - No Knock Outs on ends (standard)

KO - Knock Outs on ends


171



WP SYSTEM’s classic Under Shelf Luminaire lights up any workplane or shelving unit with ease. T5/T5HO or T8 fluorescent lamping supplies even, energy efficient lighting that can be optionally dimmed down to provide visual comfort at home or work.

Choose from two housing profiles: (USAC) Under Shelf Angled Profile, or (BOXUSAC) Under Shelf Box Profile which both include On/Off rocker switch as a standard feature.

Acrylic lenses of White, Clear Prismatic or Clear offer variety for delivering illumination, and with your choice of either standard High Reflectivity White or any custom colors as a finish, WP SYSTEMS Under Shelf Luminaires provide attractive and reliable application functionality.


WP SYSTEMUnder Shelf LuminaireT5/T5HO or T8

Angled or Box Profile Fixture

Made in the USA


Lamping and BallastSingle T5, T5HO or T8 linear fluorescent lamps in cross section. Integral electronic ballast standard. Dimming and emergency battery pack options available. Consult factory for ballast availability and specifications. Rocker switch provided as standard feature.


MountingSuitable for surface mounting in multiple applications. Ideal for under-cabinet or under-shelf mounting. Compatible for field thru-wiring.

LensesSnap on acrylic lenses are available as (ACW) White, (ACC) Clear, or (ACP) Clear Prismatic.



V-1012A

Type: Job Name:




172


WP-

WP SYSTEMUnder Shelf LuminaireT5/T5HO or T8

Angled or Box Profile Fixture

SPECIFICATION CODE

V-1012A

lamps model length finish lens voltage ballast options

Dimensions

Model

USAC - UnderShelfAngledProfile

BOXUSAC - UnderShelfBoxProfile

Nominal Length

2 - 2’3 - 3’ 4 - 4’6 - 6’ 38 - 8’ 3

Voltage1

120277

Ballast


Dimming2


NOTES1 other voltages available, consult factory2 not available in all lengths, consult factory3 6’lengthsaremadeupwith(2)3’fixturessharingaballast 8’lengthsaremadeupwith(2)4’fixturessharingaballast

Lamps

T5T5HOT8

Options


Finish


CUP - Custom Paint

Lens

ACW -WhiteACC - ClearACP - Clear Prismatic

USAC

BOXUSAC

1 1⁄2”

3 3⁄4”

1 1⁄2”

3 5⁄16”

On / Off rocker switch

On / Off rocker switch

Under Shelf Angled Profile

Under Shelf Box Profile

Nominal Length

Actual Lengths USAC

Actual Lengths BOXUSAC

T5/T5HO T8 T5/T5HO T82 22 1⁄2” 24 1⁄8” 22 1⁄2” 24 1⁄8”3 34 5⁄16” 36 1⁄8” 34 5⁄16” 36 1⁄8”4 46 1⁄8” 48 1⁄8” 46 1⁄8” 48 1⁄8”6 68 5⁄8” 72 1⁄4” 68 5⁄8” 72 1⁄4”8 92 1⁄4” 96 1⁄4” 92 1⁄4” 96 1⁄4”


173



When envisioning traditional back-stage theatre make-up mirrors, vanity or beauty salon stations, or perhaps even footlights, WP SYSTEM’s Medium Base Strip Fixtures are the perfect choice to deliver light and set the tone with gorgeous, glowing illumination.

Contrary to current trends, incandescent lighting still remains a preferred way to light many applications, and WP SYSTEM’s Medium Base Strip Fixtures offer the ideal solution for these unique projects.

With a small housing profile of 2 3⁄4” x 1 7⁄8”, and standard nominal lengths from as short as 1’ and up to 6’ long, mounting possibilities for WP SYSTEM’s Medium Base Strip Fixtures are easy and versatile.

Fixtures will accommodate medium based LED or incandescent lamps and offer optional wire guards or baffle accessories to help protect the lamp and direct light to specific locations.


WP SYSTEMMedium Base Strip FixtureLED or Incandescent Lamp

Multi-Application

Made in the USA

ConstructionHeavy gauge aluminum construction. Post-formed high reflectivity white powder coat finish provides smooth edges, rust-resistance and even coverage on entire fixture.

LampingAccommodates up to 6 incandescent or LED medium base lamps. Lamps are available as 6” on center (o.c.) or 12” o.c. mounting. Will accommodate up to 75W lamps.


MountingSuitable for surface mounting in multiple applications. Ideal for dressing room or make-up mirror applications. May be used in cove or soffit. Mounting clip (MC03) option available for extra surface mount stability.

Fixture LengthFixtures are available in nominal lengths of 1, 2, 4, and 6 feet. Continuous run mounting and thru-wire compatible.

Options(WGR) Round Wire Guard, or (BFL) Square Baffle matches the finish of the fixture.


V-1012

Type: Job Name:




174


WP-

WP SYSTEMMedium Base Strip FixtureLED or Incandescent Lamp

Multi-Application

SPECIFICATION CODE

V-1012

lamps model lampspacing #oflamps finish voltage options

Dimensions/Options

Lamp Type

MB - Medium base lamps

Voltage1

120277

Number ofLamps

1L - 1 lamp2L - 2 lamp4L - 4 lamp6L - 6 lamp

Options

WGR - Round Wire GuardBFL -SquareBaffleMC03 - Mounting Clip

Finish


CUP - Custom Paint

LampSpacing

6 - 6” o.c.12 - 12” o.c.

Model

S - Standard

NOTES1 other voltages available, consult factory

1L = 1 lamp

2L = 2 lamp

4L = 4 lamp

6L = 6 lamp

Round Wire Guard (WGR)

SquareBaffle(BFL)

LampmoduleexamplesshownwithA19orPAR20lamps

MC03 Mounting Clip (optional)

6“ o.c.1L = 6” 2L = 12”4L = 24”6L = 36”

12“ o.c.1L = 12”2L = 24”4L = 48”6L = 72”

FIXTURE LENGTHS

2 1⁄4”1 7⁄8”

2 3⁄4” 3⁄4”

4”

6”

4 3⁄4” (inside diameter)

4 1⁄8”

S


175



WP LED Specification Grade Strip fixtures are the perfect choice when less is best.

Whatever your specification requires, WP SYSTEM fixtures can deliver strong light while providing durability and value to any interior project: commercial, architectural, residential or retail.

Constructed of a die-formed heavy duty aluminum housing with post production powder coat and integral heat sink liner component. Extruded acrylic lens combined with dimming capabilities complete the make-up for one of our most popular and enduring product lines.


WP LEDStandard/Low Profile StripDistributed Array LED


Made in the USA

ConstructionWP LED Standard and WP LED Low Profile are constructed of a die-formed heavy duty aluminum housing with post production powder coat and integral heat sink liner component. Lens is frosted clear extruded acrylic.


MountingSuitable for surface mounting in multiple applications. May be used in cove or soffit. Compatible for field thru-wiring. Optional 30T mounting clip with 30° tilt for both Standard and Low Profile fixtures.



Fixture LengthFixtures are available in nominal lengths of 2, 3 and 4 feet. Continuous run mounting and thru-wire compatibility.


V-0417

Standard

Low Profile

Type: Job Name:




176


WP LEDStandard/Low Profile StripDistributed Array LED


SPECIFICATION CODE

V-0417

ModelWP-LED-S - Standard (integral driver)

WP-LED-LP - LowProfile(remote driver)

Nominal Length

2 3 4

CR1_Continuous Run(runs are made up of 4’ nominalfixturesunlessotherwisespecified)

Voltage

1202773472

Dimensions

ColorTemp

27 - 2700K30 - 3000K35 - 3500K40 - 4000K

model lightengine colortemp length finish voltage driver options options

4.375”

3.125”

2.875”

2.500”

3.875”

2.250”

2.875”

1.500”

NOTES1 specify length in actual feet2 available for EB, D1, D10 drivers only3 feedlengthon“LowProfile”isstandardfromthefactoryat9’ specifyXFL”_”withlengthrequired,factorymaxlengthis32’4 120 only5 see sensor supplement page for detailed info6 availablefor“S”standardmodelonly7 consultfactoryforEMoptions,“S”standardmodelonly

Finish


CUP - Custom Paint

Options

30T - Mounting Clip with 30° tilt

XFL3_ - Specify Feed Length if longer than 9’


SensorsSEN__EX15,6 - ExternalSensorSEN__EX25,6 - ExternalSensorSEN__IN15,6 - Internal SensorSEN__IN25,6 - Internal Sensor

30T Mounting ClipStandard

Low Profile

1/2”Knockout


LED2 23.250” 3 34.875” 4 46.500”

Driver



LED

LightEngine


CLO Calculator

WP LED (4000K FW lens)

SLO - 124.6 lm/watt delivered @ 4.4 w/ft consumed watts, 548 lm/ft.HLO - 117.1 lm/watt delivered @ 9 w/ft consumed watts, 1054 lm/ft.CLO - refer to CLO Calculator325 LED supplement info

WP-LED-S with Optional Sensor SEN__EX2

http://www.birchwoodlighting.com/products/pdfs/sensors.pdf





177



WP LED Specification Grade Strip fixtures are the perfect choice when less is best.

Whatever your specification requires, WP SYSTEM fixtures can deliver strong light while providing durability and value to any project: commercial, industrial, architectural, residential or retail.

WP LED 450 is constructed of a die-formed heavy gauge steel housing with post production powder coat paint. Extruded acrylic lens fits cleanly edge-to-edge across the 4 1⁄2” housing for a broad full width lens appeal. Combined with dimming capabilities, WP LED 450 provides a new look to one of our most popular and enduring product lines.


WP LED4.50Specification Grade Strip LED


Made in the USA

ConstructionWP LED 450 is constructed of a die-formed heavy duty steel housing with post production powder coat paint. Integral driver with multiple knock-outs on back. Lens is frosted white extruded acrylic.





Fixture LengthFixtures are available in nominal lengths of 2, 4 or 8 feet. Continuous run mounting and thru-wire compatibility.


V-0417

Type: Job Name:




178


WP LED4.50 Specification Grade Strip LED


SPECIFICATION CODE

V-0417

ModelWP-LED-450 - (integral driver)

Nominal Length

2 - 2’4 - 4’8 - 8’

CR2_Continuous Run

Voltage

1202773473

ColorTemp

30 - 3000K35 - 3500K40 - 4000K

model lightengine colortemp length finish voltage driver option option

Finish


CUP - Custom Paint

Driver


DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10VHLA24 - Lutron 2 wireHLA3 - Lutron A-series 3 wireHLH - Lutron H EcoSystemHL5 - Lutron 5 seriesEcoSystemDALI - DALI

LightEngine


CLO Calculator

Options

SensorsSEN__EX15 - ExternalSensorSEN__EX25 - ExternalSensorSEN__IN15 - Internal SensorSEN__IN25 - Internal Sensor


4 1/2”

3 1/2”

93 3/8” (8’ Nom.)49 3/8” (4’ Nom.)27 3/8” (2’ Nom.)

4 1/2”

3 1/2”

TOP VIEW

SIDE VIEW

WGL Option

(Option)

(Option)

5 1/8”

88 1/4” (8’ Nom.)44 1/4” (4’ Nom.)22 1/4” (2’ Nom.)

TOP VIEW

SIDE VIEW

4 1/2”

3 1/2”

Dimensions

NOTES1 consult factory2 specify length in actual feet3 available for EB, D1, D10 drivers only4 120V only5 see sensor supplement page for detailed info, consult factory for further options 6 consult factory for EM options4 1/2”

3 1/2”

WGL Option

WP-LED-450

LED

WP LED (4000K FW lens)

SLO - 120.6 lm/watt delivered @ 4.5 w/ft consumed watts, 543 lm/ft.HLO - 109.6 lm/watt delivered @ 9.4 w/ft consumed watts, 1030 lm/ft.CLO - refer to CLO Calculator450 LED supplement info

Optional Sensor SEN_ EX2 shown Optional Sensor SEN_IN1 shown


http://www.birchwoodlighting.com/products/pdfs/sensors.pdf



179


GLOSSARYA-Z Guide for frequently used

abbreviated part numbers

ACC Clear Acrylic Lens (WP series only)ACP Prismatic Acrylic Lens (WP series only)ACW White Acrylic Lens (WP series only)BA Bent ArmBB14B 14”ConcealedMountRemotePowerBoxBB16A 16”FlushMountRemotePowerBoxBB Bright BlackBF Back FeedBF Backer Flange (JAKE and JILL)BFL SquareBaffleBG Bright GoldBK Back Fitting Feed PointCA Custom ArmCL Clear (lens)CLO Custom Lumen Output LEDCR Continuous RunCSS-R Cable Suspended RotationalCSS Cable Suspended SystemCUC CustomPowerCord(color)CUH CustomHeight(forbentarmoption)CUL CustomLength(powercord)CUP CustomPaint(powdercoatfinish)D10 10% 0-10V DimmingD1 1% 0-10V DimmingDR Direct OrientationEC Matching Solid End ClipEF End FeedEFL End Feed LeftEFR End Feed Right EM Emergency Battery PackESH Lutron® Eco-System® H Series Multiple Control Input Dimming BallastES Lutron® Eco-System® Dimming BallastF90 Face SurfaceFB FlatBlack(paintfinish)FBLSS Flat Blade Louver Semi-SpecularFC Frosted Clear (lens) SIC Satin Ice ClearFF Front FeedFFL Front Feed LeftFFR Front Feed RightFH7 Fulham Co.®FH7-DUAL-500Lemergencyballast(500lumens)FH8 Fulham Co.®FH8-DUAL-1300Lemergencyballast(1300lumens)FH9 Fulham Co.®FH9-DUAL-800Lemergencyballast(800lumens)FLS Flush (lens)FT Prismatic Sided Frosted White (lens) FW Frosted White (lens) SIW Satin Ice WhiteFX Prismatic Sided Frosted Clear (lens)GR GlossRed(finish)HF2S 12” Linear LED Narrow ArrayHF2S-H 12” Linear LED Narrow Array Half PopulatedHL Lutron® Hi-lume 3D® Dimming BallastHLO High Lumen Output LED L9LR 12” Linear LED Distributed ArrayHLAD Lutron Digital

Part Number and Definition Previous Part Number (if applicable)


© 2012 Birchwood Lighting, Inc. All rights reserved.180




HLA2 Lutron 2 WireHLA3 Lutron 3 WireHRW HighReflectivityWhiteIA Interlude® T-grid ceilingIB Integral BallastIC90 Inside Corner 90IEC Illuminated End-CapIN In-direct OrientationINSF Indirect Shield Flat BlackINSM Indirect Shield Matte WhiteIS Indirect ShieldISL28 Iota® emergency ballast (1 lamp at 500 lumens)ISL540 Iota® emergency ballast (1 lamp at 1300 lumens)ISL54 Iota® emergency ballast (1 lamp at 825 lumens)JB Joiner BandKO Knock OutLF90 Left Face 90LP550 Philips® Bodine®LP550lowprofileemergencyballast(390-700lumens)LP600 Philips® Bodine®LP600lowprofileemergencyballast(600-1325lumens)LP600STU Philips®BodineLP600STUREDiTEST® emergency ballast (600-1325 lumens)LP Clear Linear Prismatic (lens)LT5 T5 Lamp SleevesLT8 T8 Lamp SleevesM10 Philips Advance® Mark 10 Powerline® Dimming BallastMC01 Flush Mount Mounting ClipMC02 Glass Mount ClipMC03 Surface Side-Mount ClipMC04 Surface End-Mount ClipMC595 Mounting Clip Corner SpringMEC Machined End CapMG Magnetic BallastMTR-REC Miter RectangleMTR-R Miter RunMW MatteWhite(paintfinish)NC No CanopyNL No LensOHMB Overhead Mounting BracketOC90 Outside Corner 90P10A Preset 10A DMX ControllerPDC Plastic Dust CoverRAS Rotational Arm SystemRB Remote BallastRF90 Right Face 90SA Straight ArmSC Satin Clear (anodized finish)SE30 T5HE3000KHighEfficiencySeamlesslamp(warmwhite)SE40 T5HE4000KHighEfficiency Seamless lamp (cool white)SG SatinGold(finish)SG Slot Grid (ceiling type)SL Silver(paintfinish)SLO Standard Lumen Output LED L9LR-H 12” Linear LED Distributed Array Half CurrentSM Surface Mount


181





SO30 T5HO 3000K High Output Seamless lamp (warm white)SO40 T5HO 4000K High Output Seamless lamp (cool white)SSM Suspended Surface Mount (remote ballast surface mounted)STK1 Stack Mount Single Side Arm MountSTK2 Stack Mount Double Side Arm MountSTND Bracket Bar with 5” Round CanopyTL Mud-Over Trimless FlangeTR 3/4” Flange TrimTRI Tri-side LensWGR Round Wire GuardWM Wall MountWMB Wall Mount BracketsXFL ExtraPowerCordLength(WPLED)

0-10V 0-10 Volts15L 15/16”ExposedLay-inGrid15T 15/16”ExposedTegularGrid1END One End Fitting Feed Point2CKT 2 Circuit Switching2END Two End Fitting Feed Point9L 9/16”ExposedLay-inGrid9T 9/16”ExposedTegularGrid4CP 4” Cover Plate1TR 1 1/4” Trim Ring

2911 Dow AvenueTustin, CA 92780

T 714 550-7118F 714 550-7151


©2016 Birchwood Lighting, Inc. All rights reserved.Due to a program of continuous improvement product information subject to change

Printed in USA - 1116

birchwood lighting specification guide

Documents

hailey led

sydney led

rsm led

stella led

nolan led

collin led

chloe led

nathan led