base - woodcraft home page
TRANSCRIPT
BASE
B0D B0D1D B0D2D
B1D B1D1D B1D2D
Base - 0 Door Base - 0 Door, 1 Dwr Base - 0 Door, 2 Dwr
Base - 1 Door Base - 1 Door, 1 Dwr Base - 1 Door, 2 Dwr
1. Stretchers, Solid Top, Full Tops available
2. Custom Sectioning available
3. Adjustable or Fixed Shelves
4. Specify Finished Ends and Scribe
5. Cabinets available any size
6. Cabinets available any material
7. Solid backs available in 1/4", 1/2", 3/4"
8. Solid backs are rabbited in +1/16"
9. Integral Toe is available (Specify Ht and Depth)
* When Integral Toe is specified, you must specify toe height, and knotch depth
HH
D
BASEB2D B2D1D B2D2D
B0DVP B1DVP B2DVP
B2SD B3SD B4SD
Base - 2 Door Base - 2 Door, 1 Dwr Base - 2 Door, 2 Dwr
Base - 0 Door, 2 Vert. Partitions Base - 1 Door, 2 Vert. Partitions Base - 2 Door, 2 Vert. Partitions
Base - 2 Sldg Door, 1 Divider Base - 3 Sldg Door, 2 Divider Base - 4 Sldg Door, 3 Divider
Specify Left / Right Openings Specify Left / Right Openings Specify Left / Right Openings
BASEKD1D KD2D KD3D
BB1D0DL / BB1D0DR BB2D0DL / BB2D0DR BB1D1DL / BB1D1DR
BB2D1D . .
Knee Desk - 1 Drawer Knee Desk - 2 Drawer Knee Desk - 3 Drawer
Base Blind - 1 Door, 0 Dwr Base Blind - 2 Door, 0 Dwr Base Blind - 1 Door, 1 Dwr
Base Blind - 2 Door, 1 Dwr . .
Bottoms and Backs are Optional
Full Tops Only On K.D. Cabinets Full Tops Only On K.D. Cabinets Full Tops Only On K.D. Cabinets
Specify blind panel width, surface or inset Specify blind panel width, suface or inset Specify blind panel width, surface or inset
Specify blind panel width, surface or inset
Bottoms and Backs are Optional Bottoms and Backs are Optional
SINK
S0D0FD S0D1FD S0D2FD
S1D0FD S1D1FD S1D1TD
Sink - 0 Door, 0 False Dwr Sink - 0 Door, 1 False Dwr Sink - 0 Door, 2 False Dwr
Sink - 1 Door, 0 False Dwr Sink - 1 Door, 1 False Dwr Sink - 1 Door, 1 Tilt Dwr
1. Sink cabinets have no top stretchers
* When Integral Toe is specified, you must specify toe height, and knotch depth
2. Sink cabinets can be ordered with no bottoms
Tilt - Drw ConstructionFalse Dwr Construction
3. Cabinets are available with removeable bottoms
SINKS2D0FD S2D1FD S2D1TD
S2D2FD S2D2TD S2D2D1FD
S1D1FDEXT S2D1FDEXT .
Sink - 2 Door, 0 False Dwr Sink - 2 Door, 1 False Dwr Sink - 2 Door, 1 Tilt Dwr
Sink - 2 Door, 2 False Dwr Sink - 2 Door, 2 Tilt Dwr Sink - 2 Door, 2 Dwr, 1 False Dwr
Sink, 1 Door, 1 False Dwr Extended Sink, 2 Door, 1 False Dwr Extended .
Specify Distance FD Extends Forward Specify Distance FD Extends Forward
Specify Tilt or FD Specify Tilt or FD
Available With Round Back Available With Round BackAvailable With Round Back
BASE CORNER
BC1DPC BC1D0D BC2D0D
SC1D0FD SC1D1FD SC2D1FD
Base Corner - 1 Door, Pie Cut Base Corner - 1 Door, 0 Dwr Base Corner - 2 Door, 0 Dwr
Sink - 1Door, 0 False Dwr Sink Corner - 1 Door, 1 False Dwr Sink Corner - 2 Door, 1 False Dwr
1. Backs are 1/2" material rabbited in + 1/16"
2. Tops and bottoms extend past sides in front to maintain proper door bumper gap
3. Backs are line bore drilled to support shelves
BASE/WALL END BECL0D BECR0D BEHR0D
BEL0D BER0D WECL0D
WECR0D WEL0D WER0D
Base End - Curved Left, 0 Door Base End - Curved Right, 0 Door Base End - Half Round, 0 Door
Base End - Clipped Left, 0 Door Base End - Clipped Right, 0 Door Wall End - Curved Left, 0 Door
Wall End - Curved Right, 0 Door Wall End - Clipped Left, 0 Door Wall End - Clipped Right, 0 Door
Specify Radius, Fixed Shelves Only Specify Radius, Fixed Shelves Only Specify Quantity of Fixed Shelves
Specify Quantity of Fixed Shelves Specify Quantity of Fixed Shelves
Specify Radius, Fixed Shelves Only Specify Quantity of Fixed Shelves
Depth
W
WD
WD
Specify Radius, Fixed Shelves Only
Specify Quantity of Fixed Shelves
WALL
W0D W0D2VP W1D
W2D W1DMW W2DMW
Wall - 0 Door Wall - 0 Door, 2 Vert Partitions Wall - 1 Door
Wall - 2 Door Wall - 1 Door, Microwave Wall - 2 Door, Microwave
Above Below1. Specify Wall Notch Above, Below, None
2. With undercabinet lights, specify the light rail height (Doors and Finished Ends will extend that amount)
3. Specify bottom finish material
4. Specify Finished Ends and Scribe dimension if required
5. Solid Backs available in 1/4", 1/2", 3/4"
6. When Solid Back is specified, backs are rabbited +1/16"
7. Custom Sectioning available
* When "Wall Nailer In" is specified, unfinished ends are routed for wall mount nailer strip
8. When Sectioning cabinets, specify interior opening dimensions
Back Optional In Lower Section Back Optional In Lower Section
None
9. Molding filler can be ordered in any wall cabinet
*Specify Left / Right Openings
9
WALLW2D2S W4D2S W2D2SMD
W1D-G W2D-G W2DR
W2SD1D W3SD2D
Wall - 2 Door, 2 Section Wall - 4 Door, 2 Section Wall - 2 Door, 2 Section, Mult. Divider
Wall - 1 Door, Glass Cut Out Wall - 2 Door, Glass Cut Out Wall - 2 Door Refrigerator
Wall - 2 Sliding Door, 1 Divider Wall - 3 Sliding Door, 2 Divider
Specify up to 12 - 1/4" DividersSpecify lower section height Specify lower section height
Specify lower section height
W4SD3D
Wall - 4 Sliding Door, 3 Divider
*Specify Style and Rail Widths *Specify Style and Rail Widths
H
Extension
Specify L/R and Amount to Extend* Optional - Top Door Hinge
WALL CORNER
WC0D WC1D0D WC1DPC
WC2DPC2S WB1D0D WB2D0D
Wall Corner - 0 Door Wall Corner - 1 Door, 0 Divider Wall Corner - 1 Door, Pie Cut
Wall Corner - 2 Door, Pie Cut 2 Section Wall Blind - 1 Door Wall Blind - 2 Door
1. Backs are 1/2" material rabbited in + 1/16"
2. Tops and bottoms extend past sides in front to maintain proper door bumper gap
3. Backs are line bore drilled to support shelves
*Specify Blind Panel Width *Specify Blind Panel Width
Drawer - 1 Float Drawer - 2 Custom (Specify Sizes) Drawer - 2 Float
DRAWER BANKS
DB1D_1 DB2 DB2D_1
DB3 DB3D_1 DB3D_2
Drawer - 3 Custom (Specify Sizes) Drawer - 3 Float Drawer - 1 Regular, 2 Float
1. Drawer faces can be any size
2. Holes are drilled for specified hardware
3. Drawer stretchers are optional
4. Cabinets can be ordered with integral toe
5. Drawer boxes can be ordered with cabinet
6. Cabinet can be constructed with stretchers or a full top
eliminating the need to count holes for placement
DRAWER BANKSDB3D_3 DB4 DB4D_1
DB4D_2 DB4D_3 DB4D_4
DB5 DB5D_1 DB5D_2
Drawer - 2 Regular, 1 Float Drawer - 4 Custom (Specify Sizes) Drawer - 4 Float
Drawer - 1 Regular, 3 Float Drawer - 2 Regular, 2 Float Drawer - 3 Regular, 1 Float
Drawer - 5 Custom (Specify Sizes) Drawer - 5 Float Drawer - 1 Regular, 4 Float
DRAWER BANKSDB5D_3 DB5D_4 DB6
DB6D_1 DB6D_2 DB7
DB7D_1 .
Drawer - 2 Regular, 3 Float Drawer - 3 Regular, 2 Float Drawer - 6 Custom (Specify Sizes)
Drawer - 6 Float Drawer - 1 Regular, 5 Float Drawer - 7 Custom (Specify Sizes)
Drawer - 7 Float . .
DB7D_2
Drawer - 1 Regular, 6 Float
TALL
T0D T1D T2D
T0D2S T1D2S T2D2S
Tall - 0 Door Tall - 1 Door Tall - 2 Door
Tall - 0 Door, 2 Section Tall - 1 Door, 2 Section Tall - 2 Door, 2 Section
1. Tall cabinets have no nailers
2. Tall cabinets have standard 1/2" backs
3. Tops, Bottoms and Sides are rabbited 1/2" deep
4. Integral Toe is available
5. When sectioning, specify interior opening heights
6. Molding Filler option is available
*Specify lower opening height *Specify lower opening height*Specify lower opening height
Lower Opening
Upper Opening
TALLT2D0D2S T4D0D2S T3D3S
T1D0DTV T2D1DTV T6D3S
TB2D TB4D T0DHP
Tall - 2 Door, 0 Divider, 2 Section Tall - 4 Door, 0 Divider, 2 Section Tall - 3 Door, 3 Section
Tall - 1 Door, 0 Divider, TV Tall - 2 Door, 1 Divider, TV Tall - 6 Door, 3 Section
Tall Blind - 2 Door Tall Blind - 4 Door Tall - Open Horizontal Partition
*Specify lower opening height *Specify lower opening height *Specify opening heights for "A" and "C"
C
A
*Specify lower opening height *Specify lower opening height *Specify opening heights for "A" and "C"
C
A
*Specify blind panel width, lower opening *Specify blind panel width, lower opening *Specify up to 10 opening sizes
No line bore
OVEN
OC2DOD OC2D1D OC2D2D
OC2D3D OC2D1DP OC4D0D
Oven - 2 Door, Open, Open Oven - 2 Door, 1 Dwr Oven - 2 Door, 2 Dwr
Oven - 2 Door, 3 Dwr Oven - 2 Door, 1 Dwr Pair Oven - 4 Door, 0 Dwr
1. Oven Cabinets have 1/2" rabbited backs, standard.
2. 3/4" Dividers are available in the top section
3. Integral Toe is available for all Oven Cabinets
4. The oven section has no line bore holes
C
B
A
Specifying Oven OpeningsA. Overall combined oven opening dimension
B. Lower oven opening dimension (only when two openings required)
C. Distance from the bottom of box side, to the oven opening
5. A loose filler is provided for top of oven opening
A
OVENOC2DS OC4D1D OC4D2D
OC4D3D . .
. . .
Oven - 2 Door, Single Oven - 4 Door, 1 Dwr Oven - 4 Door, 2 Dwr
Oven - 4 Door, 3 Dwr . .
. . .
PENINSULA BASE
PB0D0D PB2D0D PB4D0D
PB2D1D PB4D2D PB4D1D
Peninsula Base - 0 Door, 0 Dwr Peninsula Base - 2 Door, 0 Dwr Peninsula Base - 4 Door, 0 Dwr
Peninsula Base - 2 Door, 1 Dwr, 1 FF Peninsula Base - 4 Door, 2 Dwr, 1 FF Peninsula Base - 4 Door, 1 Dwr, 1 FF
1. P.B. Cabinets available with solid tops or rails
2. Available with Integral Toe
PENINSULA WALL
PW0D0D PW2D0D PW4D0D
. . .
Peninsula Wall - 0 Door, 0 Divider Peninsula Wall - 2 Door, 0 Divider Peninsula Wall - 4 Door, 0 Divider
. . .
DRAWER STACKSDS1P1S DS1P2S DS1P3S
DS2P1S DS2P2S DS2P3S
DS2P4S DS2P5S DS3P1S
Drawer Stack - 1 Pair, 1 Single Drawer Stack - 1 Pair, 2 Single Drawer Stack - 1 Pair, 3 Single
Drawer Stack - 2 Pair, 1 Single Drawer Stack - 2 Pair, 2 Single Drawer Stack - 2 Pair, 3 Single
Drawer Stack - 2 Pair, 4 Single Drawer Stack - 2 Pair, 5 Single Drawer Stack - 3 Pair, 1 Single
DRAWER STACKSDS3P2S DS3P3S 2DRLAT
2DRPED 3DRPED B0D1DL
B0D2DS B1D2DS B2D2DS
Drawer Stack - 3 Pair, 2 Single Drawer Stack - 3 Pair, 3 Single 2 Drawer Lateral File
2 Drawer Pedistal 3 Drawer Pedistal Base - 0 Door, 1 Dwr Lower
Base - 0 Door, 2 Dwr Stacked Base - 1 Door, 2 Dwr Stacked Base - 2 Door, 2 Dwr Stacked
File
File
File
WARDROBEWD0D2D WD1D1D WD1D2D
WD1D3D WD1D4D WD1D5D
WD1D6D WD2D1D WD2D1DP
Wardrobe - 0 Door, 2 Dwr Wardrobe - 1 Door, 1 Dwr Wardrobe - 1 Door, 2 Dwr
Wardrobe - 1 Door, 3 Dwr Wardrobe - 1 Door, 4 Dwr Wardrobe - 1 Door, 5 Dwr
Wardrobe - 1 Door, 6 Dwr Wardrobe - 2 Door, 1 Dwr Wardrobe - 2 Door, 1 Dwr Pair
Specify All Dwr Front HeightsSpecify All Dwr Front Heights Specify All Dwr Front Heights
Specify All Dwr Front Heights Specify All Dwr Front Heights Specify All Dwr Front Heights
Specify All Dwr Front Heights Specify All Dwr Front Heights Specify All Dwr Front Heights
WARDROBEWD2D2D WD2D2DP WD2D3D
WD2D3DP WD2D4D WD2D4DP
WD2D5D WD2D5DP WD2D6D
Wardrobe - 2 Door, 2 Dwr Wardrobe - 2 Door, 2 Dwr Pair Wardrobe - 2 Door, 3 Dwr
Wardrobe - 2 Door, 3 Dwr Pair Wardrobe - 2 Door, 4 Dwr Wardrobe - 2 Door, 4 Dwr Pair
Wardrobe - 2 Door, 5 Dwr Wardrobe - 2 Door, 5 Dwr Pair Wardrobe - 2 Door, 6 Dwr
Specify All Dwr Front HeightsSpecify All Dwr Front Heights Specify All Dwr Front Heights
Specify All Dwr Front Heights Specify All Dwr Front Heights Specify All Dwr Front Heights
Specify All Dwr Front Heights Specify All Dwr Front Heights Specify All Dwr Front Heights
CLOSET
TC0D TC0D TC1D
TC2D TC0DPCL TC0DPCR
Tall Closet - 0 Door Tall Closet - 0 Door Tall Closet - 1 Door
Tall Closet - 2 Door Tall Closet - 0 Door, Pie Cut Left Tall Closet - 0 Door, Pie Cut Right
Shown With Closet Poles Only Shown With Adjustable Shelves Only
1. Special line bore drilling (3-hole pattern every 10")
3. Closet pole drilling from bottom 40", 70", 80"
5. Closet pole holes can be deleted
6. Closet pole hole pattern can be 2-hole verticle, or 3-hole circle
7. The closet pole distance from inside of back of cabinet can be adjusted
2. Line bore holes can be deleted
8. Dowel construction only
4. Closet pole holes can be relocated upon request
CLOSET PARTSCE
CCAS CCFS CN
CAS CFS CFS-E
Closet - Corner Adj Shelf Closet - Corner Fixed Shelf Closet - Nailer
Closet - Adj. Shelf Closet - Fixed Shelf Closet - Fixed Shelf End Scribe
CC CE12 / CC12
* Enter size as if shelf were fixed
Program deducts 1/16" from the length
Program deducts 1/8" from width
Drills 4 - 20mm holes to align with system
holes in side panels
Drill 2 - 20mm holes to align with system
holes in side panels, other end can be
scribed to wall
W
D
L/D
L/W R
L/D
L/W
W
D
R
Specify Dimensions From Top View
Drills 8mm holes for dowels
Closet - End Panel Closet - Center Panel Closet - End W-12" LB Add
Drills an additional row of holes to alignwith a 12" Fixed Shelf / Adj Shelf
Holes are drilled from each side to minimize blow through
Nailer Drilling Optional
Nailer Drillling Optional Nailer Drilling Optional
L L L
W W W
MISC. CABINETSCT1D1FD CT2D1FD CT3D1FD
MC0D MC1D MC2D
W2DRH T0DMS TOEBASE
Cooktop - 1 Drawer, 1 False Dwr Cooktop - 2 Drawer, 1 False Dwr Cooktop - 3 Drawer, 1 False Dwr
Medicine Cabinet - 0 Door Medicine Cabinet - 1 Door Medicine Cabinet - 2 Door
Wall - 2 Door Range Hood Tall - 0 Door, Masonite Shelves Toe Base - Frame
Specify All Dwr Front HeightsSpecify All Dwr Front Heights Specify All Dwr Front Heights
Solid Backs, Line Bore Holes Adjust Solid Backs, Line Bore Holes Adjust Solid Backs, Line Bore Holes Adjust
Two Vert Partitions Provide Space ForPuts Masonite Shelves in Entire Cabinet Specify Qty of Verticle RibsVent Pipe to Pass Through. Specify Center
Opening, Loose Panel Provided or Only in Lower Section if Specified Specify Qty of Anchor Plates
Forward and Back for Shallow Cabinet Forward and Back for Shallow Cabinet Forward and Back for Shallow Cabinet
MISC. PARTSPFF
DP DP-G DP-G2
FP-L FP-W BBB / CCC
Specify which edges are to be edgebanded Specify which edged are to be edgebanded
Door Panel - Specify Material Door Panel - Glass Cut Out Door Panel - 2 Glass Cut Outs
Fluted Panel - Long Fluted Panel - Wide CCC - Roll - Out Drawer Box
PFO PMM
L1 L2
W1
W2
Specify which edges are to be edgebanded
The panels above can be used for parts such as: Fillers, Toe Fronts, Shelves, Door Panels, etc.
W2
W1
L2L1
W2
W1
L2L1
Panel - Finish / OtherPanel - Finish / Finish Panel - Melamine / Melamine
CCC - Fronts and Back are Edgebanded
Standard Heights: 1.890"2.520"3.150"3.780"4.409"5.039"5.669"
The door panels above are edgebanded 4 sidesSpecify material face and back: FF, FO, MM, Other
Specify Style and Rail Width Specify Style and Rail Width
6.299"
6.929"7.559"8.189"8.819"9.449"
10.079"10.709"11.339"
Flute Width, Start and Stop Locations
Supply Drawings - Information Needed:Supply Drawings - Information Needed:
Flute Width, Start and Stop LocationsBBB - Standard Drawer Box
BBB - Front and Back Not Edgebanded