ball screw catalogue.pdf

8/11/2019 ball screw catalogue.pdf

1/16

Dongguan Jiayi Machinery Co.,LTDwww.abba-dg.com/enEmail: [email protected]

1

Feature:

FSU (DIN 69051) precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Flange

style with internal ball return and diameters from 16mm to 80mm with leads of 5mm to 10mm. Ball Screw

end machining available, custom ball nut designs, and lengths up to 6000mm.

1. High accuracy; For C7 series, with 300mm length, the average travel deviation is within
http://www.abba-dg.com/enhttp://www.abba-dg.com/enhttp://www.abba-dg.com/enhttp://www.abba-dg.com/en


2/16


2

0.05mm; For C5 series, with 300mm length, the average travel deviation is within 0.018mm;

For C3 series, the average travel deviation is within 0.008mm.

2. Extreme hardness; hardness can reach 602 degree.

3. High load; the static load capacity can reach 19008kgf.


3/16


3

Feature:

FDU (DIN 69051) precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades.

Flange style with internal ball return and diameters from 16mm to 80mm with leads of 5mm to

10mm. Ball Screw end machining available, custom ball nut designs, and lengths up to 6000mm.

1.High accuracy; For C7 series, with 300mm length, the average travel deviation is within


For C3 series, the average travel deviation is within 0.008mm.

2. Low driving moment; the driving moment is only 1/3 of the slide screw. That means to

reach the same effect, the power consumption of ball screw is only 1/3 of the slide screw.

3.Extreme hardness; hardness can reach 602 degree.

4. High load; the static load capacity can reach 19008kgf.


4/16


4

Feature:

FSI precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Flange style with

internal ball return and diameters from 14mm to 50mm with leads of 5mm to 10mm. Ball Screw end

machining available, custom ball nut designs, and lengths up to 6000mm.


5/16


5

1. extreme hardness; hardness can reach 602 degree.

2. Higher precision; For C7 series, with 300mm length, the average travel deviation is within


For C3 series, with 300mm length, the average travel deviation is within 0.008mm

3. Customer design is welcomed; screw length can be up to 6000mm and the supporting can be

designed as per customers requirement.


6/16


6

Feature:

FDI precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Flange style with

internal ball return and diameters from 16mm to 50mm with leads of 5mm to 10mm. Ball Screw end


7/16


7


1. Low driving moment; the driving moment is only 1/3 of the slide screw. That means to reach

the same effect, the power consumption of ball screw is less of 1/3 of the slide screw.

2. High load; the standard dynamic capacity can be up to 9770kgf.

3. High precision and extreme hardness; For C7 series, the average travel deviation is within

0.05mm; For C5 series, the average travel deviation is within 0.018mm, and the hardness can

reach 602 degree.

4. The lubrication point is located inside the ball, suitable for small machine.


8/16


8

Feature:

FSC (DIN 69051) precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Flange

style with internal ball return and diameters from 16mm to 50mm with leads of 5mm to 20mm. Ball Screw

end machining available, custom ball nut designs, and lengths up to 6000mm.


9/16


9

1. Little noise; special cap design allows steel balls to circulate inside the nut, noise generated

by high speed operation is lower than ordinary ball screws

2. No inertial effect produced; can reduce power to meet rapid feed requirement.

3. Stiffness: has higher trust and moment stiffness, because the integral unit has no angular

contact construction.

4. Compact; uses nut and support bearings as an integral unit


10/16


10

Feature:

FSE,FSB precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Flange style


11/16


11

with internal ball return and diameters from 16mm to 40mm with leads of 16mm to 40mm. Ball Screw end

machining available, custom ball nut designs, and lengths up to 6000mm

1. High speed; high axial load and acceleration

2. Easy installation; just fix the nut on the housing with bolts.

3. Stiffness: has higher trust and moment stiffness, because the integral unit has no angular

contact construction.

4. Compact; uses nut and support bearing as an integral unit.


12/16


12

Feature:


13/16


13

FSK,RSK precision rolled and ground mineature ball screw of JIC C3, C5 and C7 accuracy. Flange style


machining available, custom ball nut designs, and lengths up to 1200mm


14/16


14

Feature:

RSY precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Cylindrical style

with internal ball return and diameters from 16mm to 40mm with leads of 5mm to 20mm. Ball

Screw end machining available, custom ball nut designs, and lengths up to 6000mm.

1. Easy installation; just fix the nut on the housing with bolts.

2. Compact; uses nut and support bearing as an integral unit

3. High precision and extreme hardness; For C7 series, the average travel deviation is within

0.05mm; For C5 series, the average travel deviation is within 0.018mm, and the hardness can

reach 602 degree.

4. No inertial effect produced; can reduce power to meet rapid feed requirement


15/16


15

Feature:


16/16


16

RSU,RSH precision rolled and ground ball screw of JIC C3, C5 and C7 accuracy grades. Flange style



1. Different diameters and leads are available upon request.

2. No inertial effect produced; can reduce power to meet rapid feed requirement

3. Easy installation; just fix the nut on the housing with bolts

4. Extreme hardness; hardness can reach 602 degree.

ball screw catalogue.pdf

Documents