approval sheet sheet(20170523...approval sheet item saw filter model name sf-091505-c24 issued date...

APPROVAL SHEET

ITEM SAW FILTER

Model Name SF-091505-C24

Issued Date 2017.05.23

Revision No 2

Prepared by Confirmed by Approved by

Customer

Dept.

Name

Sign.

SAWNICS

Inc.

Dept. R&D R&D QM

Name JungHwan, Park Namjun, Kim Juwon, Park

Sign.

Approval NEW RENEW Other

Approved Date

112 Seonggeo-Street, Seonggeo-eup, Seobuk-gu, Cheonan-si, Chungcheongnam-do, South Korea / 31044

Tel : +82-41-550-9372 / Fax : +82-41-622-9116 / www.sawnics.com

SAWNICS Inc.

http://www.sawnics.com/

SAWNICS SF-091505-C24 Rev. 2

/ 15

Revision

No Date Rev No Page Contents

1 2017.02.22. 0 All First issued

2 2017.03.09 1 8 X axis subject added

3 2017.05.23 2 1,4,7,10 Error correcting


/ 15

Table of Contents

1. Product Specification 1.1 Model Name

1.2 Scope

1.3 Application

1.4 Maximum Rating

1.5 Electrical Specification

1.6 Frequency Response

1.7 Product Dimension

1.8 Test Fixture

1.9 Marking

1.10 RoHS Information

1.11 Reflow & Solder Recommendation

4 – 8

2.

Reliability Test 2.1 Test Flow

2.2 Test Items & Sample Size

2.3 Test Methods for Electrical Characteristics

9 –10

3. Parts List 3.1 Parts List

10

4. Packing 4.1 Carrier Tape Dimension

4.2 Top Cover Tape Adhesion

4.3 Reel Dimension

4.4 Packaging

11-13

5. Test Results

14

6. Important Notes

15


/ 15

1. Product Specification

1.1 Model Name : SF-091505-C24

[SF: SAWNICS / 0915: Center Frequency(MHz) / 05: Serial number / C24: Package type(CSP 1411)]

1.2 Scope : This specification is applied to the Surface Acoustic Wave filter

1.3 Application : RF SAW filter for Wireless, 915.0 MHz

1.4 Maximum Ratings ( Ta = 25℃ )

Parameters Description Rating

Maximum DC Voltage 0 V

Maximum Input Power 10 dBm

Operating Temperature Range -40℃ ~ +85℃

Storage Temperature Range -40℃ ~ +85℃

1.5 Electrical Specification

Item Test Condition Min Typ

@+25°C Max Unit

Center Frequency (Fo) - - 915.0 - MHz

Max.Insertion Loss 902.0 ~ 928.0 MHz - 2.3 3.0 dB

Amplitude Ripple 902.0 ~ 928.0 MHz - 0.9 1.8 dBp-p

VSWR 902.0 ~ 928.0 MHz - 1.8 2.1 -

Source Impedance Unbalanced(1) - 50 -

Load Impedance Unbalanced(1) - 50 -

Attenuation 10.0 ~ 800.0 MHz 42 57 - dB






Notes : (1) No Matching Network (Ref. Testing Environment Circuit as shown below).


/ 15

1.6 Frequency Response

Frequency Response

VSWR


/ 15

SMITH CHART

1.7 Product Dimension(Unit : mm)

Pin Description

B, C, E Ground

A Input

D Output


/ 15

1.8 Test Fixture

Source & Load Impedance: 50 Standard PCB Foot Print(mm)

1.9 Marking

1.10 RoHS Information

SAW FILTER C24-type (CSP-Mold Type : 1.4*1.1*0.65)

n.d. = not detected

Hazardous Materials that MUST be declared Test Method Detection

Limit (ppm)

Amount

(ppm)

Lead – Pb

IEC 62321:2013,ICP

IEC 62321:2008, UV-VIS

IEC 62321:2008, GC-MS

1000 n.d

Mercury - Hg 1000 n.d.

Cadmium - Cd 100 n.d.

Hexavalent Chromium Cr (VI) 1000 n.d.

Polybrominated biphenyls – PBBs 1000 n.d.

Polybrominated diphenyl ethers - PBDE 1000 n.d.

Does this part meet the requirements for a lead free

solder process? (Y/N) Yes

Compiled by: SGS Korea Date :27. Jan. 2016

Marking Descriptions:

S : SAWNICS

j : Band Class

2 : Series Number

X : Date Code(Year+Month)

S j

2 X


/ 15

1.11 Reflow & Solder Recommendation

1.11.1 Reflow Profile

(Temperature measured from Reflow-effected Product Surface)

Time


/ 15

2. Reliability Test

2.1 Test Flow

Visual Inspection, Dimension Check, Characteristic Inspection (Initial)

Vibration Test Drop Test Thermal Shock

Static Humidity High Temperature

Exposure

Solder Reflow Low Temperature

Exposure

Visual Inspection, Dimension Check, Characteristic Inspection (Final)

2.2 Test item and sample size

NO Test items Criterion N Terms

1 Visual Inspection No Burr, scratch, etc. All

C = 0

2 Dimension Check Specification All

3 Vibration Test Electrical Specification 100

4 Drop Test “ 5

5 Static Humidity “ 15

6 Solder Reflow “ 15

7 Thermal Shock “ 15

8 High Temp. Exposure “ 15

9 Low Temp. Exposure “ 15

Total 180


/ 15

2.3 Test Methods for Electrical Characteristics

No Test Item Condition of Test Requirements

1 Vibration

Total peak amplitude = 1.5 mm

Vibration frequency : 10~55 Hz

Sweep period : 1.0 minute

Vibration directions : 3 mutually perpendicular

Duration : 2 hr/direc.

After the test,

Specimen would be

kept at room temperature

for 2 hours.

And then the measured

values shall meet Item 1.5

2 Drop Test Random free drops : 10 times

height = 1.0 meter into concrete floor.(no load)

3 Static Humidity

Temperature : +30℃±2

Relative humidity : 60%

Duration : 96 hours

4 Solder Reflow Temp / Duration : 275℃ / 10sec

Total time : 6min.(IR-reflow)

5 Thermal Shock

Heat cycle conditions

-40℃ (30min) ↔ 85℃ (30min)

*cycle time 100 times

6 High Temperature

Exposure

Temperature : +85±5℃

Duration : 240 hours

7 Low Temperature

Exposure

Temperature : -40±5℃

Duration : 240 hours

3. Parts List

3.1 Material List

No Part name Materials remarks

1 Wafer 42 LT 4 Inch

2 Wire Au-Bump Gold

3 Base LTCC CSP 1.4x1.1

4 Cap Thin Film Mold Type -

5

6

7

8


/ 15

F

Bo

AoP1

Po

E

W

Ko

4. Packing

4.1 Carrier Tape Dimension

(Unit : mm)

A B K0 W E F P0 P1

1.30.05 1.650.05 0.750.05 8.00.3 1.750.1 3.50.1 4.00.1 4.00.1

4.2 Top Cover Tape Adhesion

4.2.1 Pull of angle : 0 ~ 15 degree

4.2.2 Speed : 300 mm/min

4.2.3 Force : 0.1 ~ 1.0N

0~15°

Direction of pull off Top cover tape

Carrier tape


/ 15

4.3 Reel Dimension

(Unit : mm)

A N H W1 W2

130.5 62 1.0 178.01.0 8.41.0 11.41.0

4.4 Packaging

4.4.1 Tray and Tape Type : N.A


/ 15

4.4.2 Packaging Box

1) Inner Box ; in which EECO puts 5 reel which contains

15000 filters.

2) Outer Box ; in which EECO puts 4 inner boxers, that is 20 reel .

Total 60000 filters/outer box


/ 15

5. Test Results

Inspected Confirmed Approved

/ / /

1 2 3 4 5 6 7

SAWNICS

SAWNICS

SAWNICS

SAWNICS

SAWNICS

SAWNICS

SAWNICS

SAWNICS

SAWNICS

NO SPEC Insp. 1 2 3 4 5 6 7

SAWNICS

SAWNICS

SAWNICS

3. Appearance SAWNICS

Attenuation

10.0~800.0 MHz

⊙ Etc.

/ /

MARKING

1. Electrical Characteristics ( S - 4 , n = 32 )

1Amplitude Ripple

Confirmed ApprovedSAWNICS

/

Inspected

10

Tested DatasResults

Part No

Quantity

AQL C = 0

RF SAW

Test Items Insp.

800.0~845.0 MHz

902.0~928.0MHz

8

SF-091505-C24

LOT No

SPEC

1020.0~1200.0 MHz

845.0~880.0 MHz min 35㏈

min 35㏈

NO

min 33㏈

min 42㏈

5

6 947.0~970.0 MHz

9

1

3

4

8

2. Dimension ( S - 4 , n = 32 )

Test Items

902.0~928.0MHz

Length

Insertion Loss

MQ-0803-02 (1) SAWNICS Inc.

( G - 1, n = 50 ) Accept, Reject

2

Accept, Reject

(Width)

Length

(Length)

0.65 max3Length

Final Result SAWNICS Accept, Reject

8 Results

9

VSWRmax 2.1

7 970.0~1020.0 MHz

2

min 40㏈

Customer

INSPECTION SHEET

902.0~928.0 MHzmax 1.8㏈

Insp. Date

Model Name

Test Condition

(Height)

Accept, Reject

1.4±0.13㎜

1.1±0.13㎜

9

min 13㏈

10

max 3.0㏈


/ 15

6. Important Notes

6.1 This device should not be used in any type of fluid such as water, oil, organic solvent, etc.

6.2 Cleaning agent isopropyl alcohol and ethyl alcohol can be used.

6.3 As rapid temperature change for cleaning after reflow soldering might be a cause of degradation or destruction,

clean this component after confirming that temperature of this component goes down to room temperature.

6.4 As ultrasonic vibration might be a cause of degradation or destruction, do not use ultrasonic cleaning.

6.5 This device follows JEDEC standards for moisture classifications.

The following this device is classified as Moisture Sensitive Level 3

This device is moisture sensitive and need to be handled within proper MSL 3 guidelines to avoid damage from

moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation.

6.6 This is an Electrostatic Sensitive Device.

Please avoid static voltage during operation and storage.

6.7 Sudden change of temperature shall be avoided, deterioration of the characteristics can occur.

6.8 If any malfunction due to designing or manufacturing which is out of specification occurs within one year after

the products have been delivered, the maker should exchange the defective products.

approval sheet sheet(20170523...approval sheet item saw filter model name sf-091505-c24 issued date...

Documents