anvil ipc coated products - amazon s3 · price sheet ipc-3.12 | effective: march 12, 2012 | cancels...

Price Sheet IPC-3.12 | Effective: March 12, 2012 | Cancels Price Sheet IPC-10.11 of October 3, 2011Anvil iPC CoAted ProduCts

www.anvilintl.com

FREIGHT ALLOWANCE:All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed.

NOTE:All orders are accepted on the basis of prices in effect at the time of shipment.

NOTICE:To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

GENERAL • Upc numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s

Web site at www.anvilintl.com.• pricing is subject to change without notice. Go to Anvil’s Web site for the most

current list price information, or contact your local Anvil representative.

LOSS OR DAMAGE CLAIMS:All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.

FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM

NortherN regioN CUStoMer SerViCe CeNter

800 -301-2701

SoUtherN regioN CUStoMer SerViCe CeNter

800 -451-4414

www.anvilintl.comRevised: 2

Anvil iPC CoAted ProduCts Price Listeffective: March 12, 2012 | replaces Prior date: october 2011 | Price sheet iPC-3.12

1. CONTROLLING PROVISIONS:These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.

2. DELIVERY:Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

3. WARRANTY:Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXpRESSED OR IMpLIED AND ALL IMpLIED WARRANTIES OF MERcHANTABILITY AND FOR A pARTIcULAR pURpOSE WHIcH EXcEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DIScLAIMED BY SELLER AND EXcLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

4. SELLER’S LIABILITY:Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.

5. RETURNS:Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.

6. SHIPMENTS:All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.

claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.

7. SPECIAL PRODUCTS:Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.

8. PRICES AND DESIGNS:prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

9. TAXES:The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.

10. NUCLEAR PLANTS:Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance pool (MAERp) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.

11. MINIMUM INVOICE:Domestic: $100 plus transportation. International: $500 plus transportation.

12. TERMS:cash, net 30 days unless otherwise specified.

NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.

NOTIcE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

FREIGHT ALLOWANcE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.



tABLe oF CoNteNtS

ANViL iPC CoAteD ProDUCtSMalleable iron, Cast iron, and steel Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Forged steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

steel Pipe nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Adapter nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

swage nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

JB smith oil Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9swage nipplestubing nipplesAPi tubing CouplingsBull Plugs

JB smith Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

JB smith tapped Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Catawissa Hammer unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Fittings for Grooved end Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12



Additional Anvil products are available to be coated upon request.

NomiNal pipe size price

Box QTY

1⁄2 $13.35 503⁄4 $13.78 351 $15.65 202 $27.69 10

21⁄2 $51.95 53 $71.55 44 $140.36 5

Mi 90° elBoW


Box QTY

1⁄2 $14.05 403⁄4 $15.27 201 $18.14 122 $34.90 10

21⁄2 $66.32 43 $93.07 34 $206.79 4

Mi tee


Box QTY

1⁄2 $14.71 753⁄4 $15.54 401 $16.65 252 $29.09 6

21⁄2 $66.96 53 $85.03 44 $156.78 4

Mi 45° elBoW

UNioNNomiNal pipe size price

Box QTY

150 1 $25.13 15300 1 $36.94 10

Mi unions


Box QTY

2 x 1⁄4 $19.87 152 x 1⁄2 $20.90 152 x 3⁄4 $18.88 152 x 1 $18.55 153 x 2 $31.52 14 x 2 $55.84 204 x 3 $55.84 1

Ci HeX BusHinGs


Box QTY

3 $32.52 1

Ci solid sQuAre HeAd PluG


Box QTY

1 $29.62 252 $56.15 15

21⁄2 $82.04 13 $97.20 14 $150.51 1

steel XH APi CouPlinGs

MAlleABle iron, CAst iron, And steel FittinGs


Box QTY

¹/₂ $14.15 20

³/₄ $14.65 60

1 $16.34 25

2 $24.44 5

3 $67.15 4

4 $124.33 4

Mi BlACK rH CouPlinGs


Box QTY

2 x 1¹/₂ $22.93 20

Mi HeX BusHinGs





Box QTY

1⁄2 $18.16 251 $20.96 252 $43.74 5

21⁄2 $100.82 13 $149.99 324 $458.12 12

2000 Fs tHreAded 90° elBoW


Box QTY

1⁄2 $19.63 251 $27.01 252 $53.43 5

21⁄2 $122.28 13 $202.30 324 $482.41 1

2000 Fs tHreAded tee


Box QTY

1 $24.42 252 $52.13 5

21⁄2 $124.64 13 $194.47 14 $469.16 1

2000 Fs tHreAded 45° elBoW


Box QTY

1 $18.33 252 $30.29 10

21⁄2 $62.45 53 $107.03 14 $192.34 1

3000 Fs tHreAded CouPlinG


Box QTY

1 $32.47 10

3000 Fs AAr tHreAded union


Box QTY

2 $116.52 53 $460.91 1

2000 Fs tHreAded Cross

Fs HeX BusHinG


Box QTY

1⁄2 $13.55 1001 $15.85 502 $24.23 123 $80.93 124 $161.69 5

ForGed steel




pipe size price Box QTY1⁄4 x 2 $13.16 25

1⁄4 x 3 $13.74 25

1⁄4 x 4 $14.10 25

1⁄2 x 2 $12.80 25

1⁄2 x 3 $13.09 25

1⁄2 x 4 $13.49 25

1⁄2 x 6 $14.13 25

3⁄4 x 2 $13.16 25

3⁄4 x 3 $13.41 25

3⁄4 x 4 $13.95 25

1 x CLOSE $13.85 25

1 x 2 $14.10 25

1 x 3 $14.24 25

1 x 4 $15.00 25

1 x 6 $16.47 25

1 x 8 $19.75 25

1 x 10 $21.19 25

1 x 12 $22.67 25

2 x CLOSE $16.80 25

2 x 3 $17.63 25

2 x 4 $18.96 25

2 x 5 $20.15 25

2 x 6 $21.66 25

2 x 7 $28.64 10

2 x 8 $28.64 10

2 x 10 $31.70 10

2 x 12 $34.80 10

3 x CLOSE $38.57 10

3 x 3 $40.37 10

3 x 4 $44.51 10

3 x 6 $49.76 10

3 x 8 $60.85 5

3 x 10 $66.14 5

3 x 12 $71.40 5

4 x CLOSE $56.31 5

4 x 4 $61.17 5

4 x 6 $69.09 5

4 x 8 $75.86 2

4 x 10 $82.88 2

4 x 12 $92.78 2

sCH 40 Welded niPPles

pipe size price Box QTY2 x 24 $94.79 1

2 x 36 $143.06 1

sCH 40 seAMless niPPles

steel PiPe niPPles

pipe size price Box QTY1⁄4 x CLOSE $16.78 25

1⁄4 x 2 $17.50 25

1⁄4 x 3 $18.83 25

1⁄4 x 4 $20.57 25

1⁄2 x CLOSE $14.30 25

1⁄2 x 11⁄2 $14.49 25

1⁄2 x 2 $14.81 25

1⁄2 x 3 $15.59 25

1⁄2 x 4 $16.66 25

1⁄2 x 6 $19.32 25

1⁄2 x 8 $23.49 25

1⁄2 x 10 $25.32 25

1⁄2 x 12 $27.18 25

3⁄4 x 2 $15.10 25

3⁄4 x 3 $16.10 25

3⁄4 x 4 $17.31 25

1 x CLOSE $16.11 25

1 x 2 $16.41 25

1 x 3 $17.71 25

1 x 4 $19.25 25

1 x 6 $22.75 25

1 x 8 $29.44 25

1 x 10 $32.10 25

1 x 12 $35.20 25

2 x CLOSE $19.97 25

2 x 21⁄2 $21.04 25

2 x 3 $22.63 25

2 x 4 $24.92 25

2 x 5 $28.52 25

sCH 80 seAMless niPPles


2 x 7 $39.76 10

2 x 8 $42.37 10

2 x 9 $44.91 10

2 x 10 $47.48 10

2 x 11 $50.07 10

2 x 12 $52.63 10

2 x 24 $105.26 1

2 x 36 $157.88 1

21⁄2 x CLOSE $44.30 10

21⁄2 x 4 $49.20 15

21⁄2 x 6 $57.08 10

21⁄2 x 8 $65.30 5

21⁄2 x 10 $73.49 5

21⁄2 x 12 $81.40 5

3 x CLOSE $54.50 10

3 x 3 $56.60 20

3 x 4 $61.66 10

3 x 6 $72.18 10

3 x 8 $84.77 5

3 x 10 $95.51 5

3 x 12 $105.21 5

4 x CLOSE $77.32 -

4 x 4 $84.19 5

4 x 6 $98.91 5

4 x 8 $110.13 2

4 x 10 $129.45 2

4 x 12 $144.11 2




AdAPter niPPles – Grooved And Grooved BY tHreAd


2 x 4 $36.27 12

2 x 6 $40.56 12

2 x 8 $44.78 12

2 x 10 $48.58 12

2 x 12 $51.87 12

3 x 4 $55.70 12

3 x 6 $60.43 12

3 x 8 $68.47 12

3 x 10 $76.37 6

3 x 12 $85.87 6

4 x 4 $71.52 12

4 x 6 $76.70 6

4 x 8 $93.21 6

4 x 10 $105.50 4

4 x 12 $114.97 4


2 x 4 $61.29 12

2 x 6 $69.87 12

2 x 8 $78.31 12

2 x 10 $85.90 12

2 x 12 $92.49 12

3 x 4 $93.43 12

3 x 6 $102.89 12

3 x 8 $118.97 6

3 x 10 $134.78 6

3 x 12 $153.77 6

4 x 4 $117.76 12

4 x 6 $128.12 6

4 x 8 $161.14 6

4 x 10 $185.72 4

4 x 12 $204.67 4

sCH 40 AdAPter niPPles sCH 80 AdAPter niPPles




sWAGe niPPles

pipe size price Box QTY2 x 1 TBE $71.59 12

2 x 11⁄4 TBE $79.25 12

2 x 11⁄2 TBE $62.60 12

21⁄2 x 2 TBE $80.03 12

3 x 1 TBE $122.98 12

3 x 2 TBE $92.01 12

4 x 2 TBE $142.68 6

4 x 3 TBE $133.06 6

2 x 1 GXT $74.61 12

2 x 11⁄2 GXT $65.17 12

21⁄2 x 2 GXT $83.27 12

3 x 1 GXT $128.23 12

3 x 11⁄4 GXT $138.09 1

3 x 2 GXT $95.71 12

4 x 2 GXT $148.55 6

4 x 3 GXT $138.44 6

21⁄2 x 2 TXG $83.27 12

3 x 2 TXG $95.71 12

4 x 2 TXG $148.55 6

4 x 3 TXG $138.44 6

21⁄2 x 2 GBE $86.50 12

3 x 2 GBE $99.41 12

4 x 2 GBE $154.42 6

4 x 3 GBE $143.83 6

pipe size price Box QTY1 x 1⁄4 TBE $42.25 12

11⁄2 x 1 TBE $54.15 12

2 x 1⁄2 TBE $99.32 12

2 x 1 TBE $80.93 12

2 x 11⁄4 TBE $85.16 12

2 x 11⁄2 TBE $80.93 12

21⁄2 x 2 TBE $98.53 12

3 x 2 TBE $113.82 6

3 x 21⁄2 TBE $113.82 12

4 x 2 TBE $184.03 4

4 x 3 TBE $169.82 4

21⁄2 x 2 GBE $106.85 12

3 x 2 GBE $123.40 6

3 x 21⁄2 GBE $123.40 12

4 x 2 GBE $199.91 4

4 x 3 GBE $184.28 4

2 x 1 GXT $84.41 12

21⁄2 x 2 GXT $102.69 12

3 x 2 GXT $118.61 6

4 x 2 GXT $191.97 6

4 x 3 GXT $177.05 6

3 x 2 TXG $118.61 6

4 x 2 TXG $191.97 4

4 x 3 TXG $177.05 4

sCH 40 sWAGe niPPles sCH 80 sWAGe niPPles




primarY DescripTioN price each Box QTY2¹∕₂ EUE 8RD x 2 EUE 8RD STD J55 SWAGE NIPPLE $278.25 6

2¹∕₂ EUE 8RD x 2 LP STD J55 SWAGE NIPPLE $278.25 62¹∕₂ UP 8RD x 2 GRV x 6 STD J55 SWAGE NIPPLE $291.40 63 UP 8RD x 2 UP 8RD STD J55 SWAGE NIPPLE $362.32 6

3 UP 8RD x 2LP STD J55 SWAGE NIPPLE $362.32 63 UP 8RD x 2¹∕₂ UP 8RD J55 SWAGE NIPPLE $362.32 63 UP 8RD x 2¹∕₂ LP STD J55 SWAGE NIPPLE $362.32 63 GRV x 2 UP 8RD STD J55 SWAGE NIPPLE $425.00 1

3 GRV x 2¹∕₂ UP 8RD STD J55 SWAGE NIPPLE $362.32 12¹∕₂ UP 8RD x 2 LP XH SWAGE NIPPLE $355.13 6

primarY DescripTioN price each Box QTY2 EUE 8RD BE x 6 STD J55 TUBING NIPPLE $111.34 12

2 EUE 8RD x 2 LP x 6 STD J55 TUBING NIPPLE $111.34 122UP 8RD x 2 GRV x 6 STD J55 TUBING NIPPLE $116.34 12

2¹∕₂UP 8RD BE x 6 STD J55 TUBING NIPPLE $168.28 62¹∕₂UP 8RD x 2¹∕₂ GRV x 6 STD J55 TUBING NIPPLE $175.92 62¹∕₂UP 8RD x 2¹∕₂ LP x 6 STD J55 TUBING NIPPLE $168.28 6

3UP 8RD x 3 8V x 6 STD J55 TUBING NIPPLE $258.31 63UP 8RD x 3 GRV x 6 STD J55 TUBING NIPPLE $270.33 1

2UP 8RD x 2 LP x 6 XH TUBING NIPPLE $211.42 122¹∕₂UP 8RD x 2¹∕₂ LP x 6 XH TUBING NIPPLE $321.22 6

tuBinG niPPles–18" and shorter upset and non-upset

primarY DescripTioN price each Box QTY2UP 8RD J55 API TUBING COUPLING POA 1

2¹∕₂UP 8RD J55 API TUBING COUPLING POA 1

APi tuBinG CouPlinGs–18" and shorter upset and non-upset

oil CountrY

sWAGe niPPles–large end upset reduced to regular or upset

Bull PluGs

primarY DescripTioN price each Box QTY2UP 8RD STD BULL PLUG $116.34 12

2¹∕₂UP 8RD STD BULL PLUG $160.43 6




Bull PluGs

tAPPed Bull PluGs

primarY DescripTioN price each Box QTY2 S40 RND CRBN STL BULL PLUG $55.28 123 S40 RND CRBN STL BULL PLUG $106.24 64 S40 RND CRBN STL BULL PLUG $136.27 62 S80 RND CRBN STL BULL PLUG $76.43 12

3 XH BULL PLUG $128.65 64 XH BULL PLUG $180.99 4

primarY DescripTioN price each Box QTY2 STD ¹∕₄ TAP CRBN STL BULL PLUG $62.16 122 STD ¹∕₂ TAP CRBN STL BULL PLUG $62.16 122 S80 ¹∕₄ TAP CRBN STL BULL PLUG $83.31 122 S80 ¹∕₂ TAP CRBN STL BULL PLUG $83.31 12





Box QTY

2 $65.79 12

2¹/₂ $127.87 8

3 $122.88 6

4 $189.09 2

FiG 100 HAMMer union


Box QTY

1 $43.71 36

2* $62.32 14

2¹/₂ $189.23 8

3 $185.71 6

4 $216.19 4

FiG 200 HAMMer union

CAtAWissA HAMMer unions


Box QTY

2 $105.60 12

2¹/₂ $253.34 8

3 $313.73 6

FiG 300 HAMMer union*Ductile Iron





Box QTY

2¹/₂ x 2 $80.61 1

3 x 2 $75.57 1

4 x 2 $102.08 1

4 x 3 $120.43 1


Box QTY

2 $166.13 1

3 $294.03 1

4 $483.52 1


Box QTY

3 x 3 x 2 $179.68 -


Box QTY

2 $67.15 18

3 $116.96 8

4 $132.80 4

90° elBoW, FiG. 7050


Box QTY

2 $67.15 -

3 $116.96 -

4 $132.80 -

45° elBoW, FiG. 7051


Box QTY

2 $97.87 16

3 $137.01 -

4 $206.61 -

tees, FiG. 7060


Box QTY

2 $58.61 30

2 – ¹/₂ TAP $83.57 1

3 $65.33 15

4 $76.05 10

6 $143.89 1

CAPs, FiG. 7074

Cross, FiG. 7068

reduCinG tee, FiG. 7061

ConCentriC reduCer (Gr X Gr), FiG. 7072


Box QTY

3 x 2 $101.60 1

ConCentriC reduCer (Grv X tHd), FiG. 7076

FittinGs For Grooved end PiPe

NomiNal pipe size

WiTh TWo posiTioN haNDle or WiTh TWo posiTioN lockiNg haNDle

2 POA

3 POA

4 POA

di BodY WitH 316 ss triM, FiG. 7500

NomiNal pipe size ipc price

Box QTY

2 $1,017.33 1

3 $1,204.53 1

Grooved end strAiners, FiG. 7260

– notes –

Mexico, Puerto Rico andLatin AmericaInternational Customer Service

Tel: +1-708-885-3000 Fax: +1-708-534-5441

Europe and Middle East RegionRick van [email protected]

Tel: +31-53-5725570 Fax: +31-53-5725579

b u i l d i n g c o n n e c t i o n s t h a t l a s t

Corporate Offices110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03801-3180

Tel: 603-422-8000 Fax: 603-422-8033

E-mail: [email protected]

U.S. REgiOnAL SERviCE CEntERS

Anvil international CanadaCustomer Service Center390 Second AvenueP.O. Box 40Simcoe, Ontario N3Y 4K9

Tel: 519-426-4551Fax: 519-426-5509

CAnAdA SERviCE CEntER

www.anvilintl.com

northern RegionRegional Distribution & Customer Service Center750 Central Avenue University Park, IL 60484

Tel: 708-885-3000 Fax: 708-534-5441 Toll Free: 1-800-301-2701

Southern RegionRegional Distribution & Customer Service Center1401 Valley View Lane, Suite 150Irving, TX 75061

Tel: 972-871-1206 Fax: 972-641-8946 Toll Free: 1-800-451-4414

intERnAtiOnAL SALES

#756 / Printed in USA / © 2012Revision: March 7, 2012

anvil ipc coated products - amazon s3 · price sheet ipc-3.12 | effective: march 12, 2012 | cancels...

Documents