antimussol ns 22

Upload: victor-lopez

Post on 04-Nov-2015

10 views

Category:

Documents


0 download

DESCRIPTION

Antimussol NS 22

TRANSCRIPT

  • *) These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the product specification sheet. For

    further information on product properties, toxicological, ecological and safety data, please refer to the safety data sheet.

    = registered trademark by Clariant Page 1/1

    Clariant International Ltd.

    Industrial & Consumer Specialties

    CH-4132 Muttenz 1 / Switzerland

    Version 2.0 January 2010

    Industrial & Consumer Specialties

    Antimussol NS 22

    Foam control agent for paints and coatings

    Composition Mixture of oils and surfactants

    Product properties *)

    Activity 100 %

    Ionicity Anionic

    Appearance at 25 C Viscous, amber liquid

    Density at 25 C About 0,88 g/cm

    Flash point About 120 C

    pH value (5 % in water) About 5

    Solubility in water Almost dispersible

    Handling and storage

    Stir briefly before use.

    Antimussol NS 22 is stable at least 2 years under the appropriate conditions.

    Use

    Antimussol NS 22 is a liquid foam control agent for waterborne latex paints, adhesives, architectural paints and coatings. Antimussol NS 22 can be used as such or pre-dispersed in water.

    Dosage: 0,2 -0,5% based on the total formulation.

    This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described on their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.