snowman€¦ · my version of a snowman by maxime83 seasonal designs > winter & christmas...

6.38 hrs

4 pcs

f

0.20 mm0.15 mm

k

0.40 mm

h

1

68.00 g

d

MK3/S

Summary

My version of a Snowman by Maxime83

Seasonal designs > Winter & Christmas & New Year's

snowman

Printer: Prusa

Model: Mk3S

Rafts: No

Supports: Yes

Resolution: 0.2 for the body, 0.15 the rest

Infill: 10% for the body, 20% the rest

Filament: Eryone White PLA, Ooznest Midnight Black PLA & 3DPrintz BrownPLA

clivebradshaw

Snowman

VIEW IN BROWSER

updated 4. 12. 2019 | published 4. 12. 2019

Print Files (.gcode) DOWNLOAD ALL FILES

9.1 MB

4.59 hrs f 0.20 mm k 0.40 mm h PLA 59.80 g d MK3/S

updated 4. 12. 2019

2.2 MB

1.29 hrs f 0.15 mm k 0.40 mm h PLA 7.10 g d MK3/S

updated 4. 12. 2019

136.6 KB

0.07 hrs f 0.15 mm k 0.40 mm h PLA 0.30 g d MK3/S

updated 4. 12. 2019

583.5 KB

0.43 hrs f 0.15 mm k 0.40 mm h PLA 1.00 g d MK3/S

updated 4. 12. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

2.3 MBupdated 4. 12. 2019

2.1 MBupdated 4. 12. 2019

The body needs support to help stick to the base, around the neck tosupport head and in the mouth. The hat needs support as it doesn't have aflat bottom. Arms and nose need support as they are not flat. Buttons andeyes are tiny, first attempt they were too big so printed again at 98% stilltoo big but managed to trim to fit. I dropped or pinged the eyes across theroom so many times it was crazy

snowman-body-02mm-pla-mk3s-4h36m.gcode

snowman-hat-buttons-eyes-015mm-pla-mk3s-1h17m.gcod

snowman-nose-02mm-pla-mk3s-4m.gcode

snowman-arms-02mm-pla-mk3s-26m.gcode

bdn-body.stl

bdn-arms.stl

2.9 MBupdated 4. 12. 2019

5.5 MBupdated 4. 12. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

bdn-noze.stl

bdn-hat-buttons-eyes.stl