checkers - media.prusaprinters.org€¦ · set of 12 checkers with a different pattern on the top...
TRANSCRIPT
2 hrs
1 pcs
f
0.30 mm
k
0.40 mm
h
PLA
35 g
d
MK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
3.9 MB
2.07 hrs f 0.30 mm k 0.40 mm h PLA 35.00 g d MK3/S
updated 24. 9. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
Summary
Set of 12 checkers with a different pattern on the top and the bottom.Customized for Prusa MK3S
Toys & Games > Board games
Print at 0.3mm is plenty enough for detail and 5% infill is fine.
m mankindforward
Checkers
VIEW IN BROWSER
updated 24. 9. 2019 | published 24. 9. 2019
checkers-set-of-12_03mm_pla_mk3s_2h4m.gcode
296.7 KBupdated 24. 9. 2019
1.2 MBupdated 24. 9. 2019
14.8 MBupdated 24. 9. 2019
1.2 MBupdated 24. 9. 2019
14.8 MBupdated 24. 9. 2019
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
checkers-set-of-12.3mf
checker_single.stl
checkers_set_of_12.stl
checker_single.stl
checkers_set_of_12.stl