snowman€¦ · my version of a snowman by maxime83 seasonal designs > winter & christmas...
TRANSCRIPT
6.38 hrs
4 pcs
f
0.20 mm0.15 mm
k
0.40 mm
h
1
68.00 g
d
MK3/S
Summary
My version of a Snowman by Maxime83
Seasonal designs > Winter & Christmas & New Year's
snowman
Printer: Prusa
Model: Mk3S
Rafts: No
Supports: Yes
Resolution: 0.2 for the body, 0.15 the rest
Infill: 10% for the body, 20% the rest
Filament: Eryone White PLA, Ooznest Midnight Black PLA & 3DPrintz BrownPLA
clivebradshaw
Snowman
VIEW IN BROWSER
updated 4. 12. 2019 | published 4. 12. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
9.1 MB
4.59 hrs f 0.20 mm k 0.40 mm h PLA 59.80 g d MK3/S
updated 4. 12. 2019
2.2 MB
1.29 hrs f 0.15 mm k 0.40 mm h PLA 7.10 g d MK3/S
updated 4. 12. 2019
136.6 KB
0.07 hrs f 0.15 mm k 0.40 mm h PLA 0.30 g d MK3/S
updated 4. 12. 2019
583.5 KB
0.43 hrs f 0.15 mm k 0.40 mm h PLA 1.00 g d MK3/S
updated 4. 12. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
2.3 MBupdated 4. 12. 2019
2.1 MBupdated 4. 12. 2019
The body needs support to help stick to the base, around the neck tosupport head and in the mouth. The hat needs support as it doesn't have aflat bottom. Arms and nose need support as they are not flat. Buttons andeyes are tiny, first attempt they were too big so printed again at 98% stilltoo big but managed to trim to fit. I dropped or pinged the eyes across theroom so many times it was crazy
snowman-body-02mm-pla-mk3s-4h36m.gcode
snowman-hat-buttons-eyes-015mm-pla-mk3s-1h17m.gcod
snowman-nose-02mm-pla-mk3s-4m.gcode
snowman-arms-02mm-pla-mk3s-26m.gcode
bdn-body.stl
bdn-arms.stl
2.9 MBupdated 4. 12. 2019
5.5 MBupdated 4. 12. 2019
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
bdn-noze.stl
bdn-hat-buttons-eyes.stl