required tools for installation of a v-1020c speaker with v-9914 bridge
Post on 08-Feb-2016
67 Views
Preview:
DESCRIPTION
Required tools for installation of a V-1020C speaker with V-9914 bridge. First, cut a pre-measured hole in the ceiling tile. Using the bridge as a guide, determine the screw holes for the ceiling tile. Align the speaker with the holes in the ceiling tile. - PowerPoint PPT Presentation
TRANSCRIPT
Required tools for installation of a V-1020C speaker with V-9914 bridge.
First, cut a pre-measured hole in the ceiling tile.
Using the bridge as a guide, determine the screw holes for the ceiling tile.
Align the speaker with the holes in the ceiling tile.
Align the speaker with the bridge on either side of the ceiling tile.
Attach all three pieces with the provided hardware.
Connect all wiring to the screw cages on the speaker.
Place the speaker assembly in the ceiling grid.
Lower the speaker assembly into position in the ceiling grid.
Insert the included volume control knob and adjust the speaker volume...
...or adjust the speaker volume with a flat blade screwdriver.
top related