list of erection material for identification (1).pdf
Post on 18-Dec-2015
218 Views
Preview:
TRANSCRIPT
-
List of Erection Material for Identification & its Usage
1. Cable Trays
For Supporting Electrical & Instrument cables & Pneumatic Tubing between Panel and Air Header & Instruments.
2. Stanchion / support
For erecting / mounting field instrument & equipment.
3. Channel support
For erecting / mounting field instrument & equipments / skids.
4. Cables
For supply & signal Transmission purpose.
5. Cable clamps / Dressing Tape
For holding & dressing cables on cable trays.
6. Cable Glands
For holding cable with instrument @ electrical connection point.
7. Cable gland cap
For covering cable gland and protection against Weather.
8. DIN Rail
For erecting / mounting panel instruments inside the panel board.
9. Wire Ferrule
For wire identification @field.
10. Wire sleeve
For protection of cable ends near Terminal block.
-
11. Wire Lugs
For connection of wire with T.B
12. Relay
For device interfacing purpose.
13. Needle valve
For isolation purpose
14. Isolation valve
For isolation purpose
15. Flange
For connection of Equipments and control valves with pipe lines.
16. Gasket
For providing isolation between two flanges.
17. Teflon tape
For avoiding leakage at fitting.
18. Instrument fittings / Ferrule
For inter connection of pneumatic tubing between devices.
19. DOL Starter
Direct ON Line starter for START / STOP Operation.
20. MCB
Miniature circuit breaker
21. Contactor
For providing multiple Relay outputs
-
22. PVC coated copper tubing
For Transmission of Compressed Air supply
23. Terminal Block
For Holding Cable strands/ core within the panel / JB.
24. Stud bolts
For flanged connection purpose.
25. Canopy
For protection of pump / Motor from weather conditions.
26. Impulse pipe line
For connection between sensor element and Transmitter.
27. Flange adaptors
For Process connections of DP Cell.
28. 3 valve manifold
For Zero Initialization & Equalizing purpose.
29. Mounting Bracket with U clamp
For connecting Transmitter on stanchion.
30. Hose Tubing
For tapping connection between sensor & Transmitter / Gauge.
31. Field Junction Box
For interconnection of wires at field.
top related