f70/100 rr tay maintenance practice training manual b1 … documentation... · maintenance practice...
Post on 08-Aug-2018
246 Views
Preview:
TRANSCRIPT
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 1/30
F70/100 RR Tay MAINTENANCE PRACTICE
TRAINING MANUAL B1 LEVEL
DERICHEBOURG Atis aéronautique Parc Algorithmes, Immeuble Thalès – 17, Avenue Didier Daurat 31700 Blagnac
: 05 34 60 61 40 - : 05 34 60 61 50
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 2/30
TRAINEE SURNAME: Forename:
Licence number:
Experience on an aircraft with similar technology: YES NO
Signature: Date : / /
ON JOB TRAINING Type: B1 Starting date : / / Ending Date : / / Performed at :
DERICHEBOURG ATIS AÉRONAUTIQUE STAMP :
PRACTICAL ASSESSORS Licence
number/Stamp NAME Signature Date
Validation by Quality Department:
Date: Name: Signature:
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 3/30
SUBJECT The aim of this document is to record all the practical tasks performed by engineers within ATIS Aviation, PART 145 FR.145.107 approved maintenance organisation, in order to comply with the requirements of Appendix III of PART 66 to have the B1 rating on F70/100 RR tay aircraft.
Any task performed in the frame of this On Job Training (OJT) will have to be signed by the trainee engineer and validated by assessors. This OJT will be performed under the responsibility of one or more B1 qualified engineers. (See “PRE-REQUISIT” on page 4/38)
After this training, the engineer will be able to: - perform verifications of systems, engines, components and operational functions such as
specified in the maintenance manual, - analyse all information in order to make decisions regarding trouble shooting and corrective
actions as per maintenance manual, - describe the component replacement procedures specific to aircraft type.
DURATION - Engineer with B1 rating and six month experience on an aircraft with a similar technology: 70 hours(1),
- Engineer with B1 rating and less than six month experience on an aircraft with a similar technology: 140 hours(1),
- Engineer with no B1 rating on an aircraft with a similar technology: four months. (1)The 70/140 hours do not have to be necessarily performed in a row, but can be extended on a period adapted to operational configuration (availability of aircraft, trainee and assessors). CLASSIFICATION Classifies the importance of a task for the completion of the practical training record. Following classifications are used: - Mandatory (PERF/IDENT/PRES): This indicates that the related task is required for
completion of the practical training record. - Optional (REMOV/OPT): This indicates that the related task is optional. It is
recommended to perform at least 70% of those tasks in each ATA chapter. At least one trouble shooting among the major ATA (*) must be performed.
TASKS CODES - PERF: Perform - IDENT: Identification - REMOV: Remove - PRES: Presentation - OPT: Optional (Trouble Shooting or Standard Exchange)
At least one trouble shooting among the major ATA (*) must be performed. *) ATA major: 12 to 80.
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 4/30
SIGNING OFF THE TASKS Part 66 Appendix 3 paragraph 2.2 requires that the practical training element must consist of the performance of representative tasks and their assessment, in order to meet the following objectives:
a) Ensure safe performance of maintenance, inspections and routine work according to the maintenance manual and other relevant instructions and tasks as appropriate for the type of aircraft, for example troubleshooting, repairs, adjustments, replacements, rigging and functional checks such as engine run, etc, if required,
b) Correctly use all technical literature and documentation for the aircraft, c) Correctly use specialist/special tooling and test equipment, perform removal and
replacement of components The nominated trainer/assessor will sign off each task when satisfied that the trainee has attained the demonstrable level of understanding that is required. PRE-REQUISIT The trainee must have participated and succeeded in a PART 147 theoretical type rating training (T1/T2 training). The assessors must have an experience of five years in the line maintenance and two years in the qualification of type. For any OJT, the assessors will have to make a request by email at the Quality Department for validation of pre-requisit.
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 5/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
00 Introduction
Aircraft Manuals and documentation PRES
Cockpit familiarisation and safety checks * PRES
MEL contents PRES
05 Time Limits/Maintenance Checks
20 Walk around, Weekly check, Routine check etc. PERF
51-00 Special Inspections (after abnormal events : hard or overweight landing, lightning strike or static discharge, bird strike or slush injection)
PRES
07 Lifting and Shoring
00 Aircraft jacking points/jacking procedure IDENT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 6/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
09 Towing and Taxiing
00 Towing points / limitation of steering angle IDENT
10 Parking and Mooring
00 Engine / airframe blanking IDENT
11 Ground safety pins PERF
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 7/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
12 Servicing
11 Refuel / defuel procedure PERF
12-01 Hydraulic fluid servicing PERF
14-02 Landing gear fluid servicing PERF
13-02 IDG servicing PERF
13-04 APU Servicing PERF
13-01 Engine servicing PERF
13-05 Engine starter servicing IDENT
14-01 Hydraulic gas servicing PERF
14-02 Landing gear gas servicing IDENT
15-01 Potable water servicing PERF
16-01 Lavatory servicing PERF
11-04 Magnetic fuel Quantity Indicator reading PERF
X Hydraulic sampling (see 29-12-10-000-814-A) IDENT
X Ground air starter (see 36-13-00-ZZ2-810-A) PERF
11-01 Aircraft grounding points IDENT
13-03 Air-conditioning servicing IDENT
14-05 Nitrogen Stall System PERF
00 Oxygen servicing PERF
Trouble Shooting
OPT
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 8/30
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 9/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
21 Air Conditioning
00 Pressurisation Control component location REMOV
00 EFIS emergency cooling fan operational test PERF
20 Heating and Cooling component location
REMOV
61 Temperature Control component location
REMOV
33 Air conditioning System cockpit indications and displays
PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 10/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
22 Auto flight
00 Autopilot and yaw damper component location
IDENT
11 Autopilot and yaw damper System operation and Test
PERF
31 Auto throttle functional test PERF
41 AFCAS fault isolation using the MCC PERF
00 Auto flight cockpit indications and displays PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 11/30
ATA Subject Task Code
Date A/C
Immat.
Trainee’s
signature
Instructor’s signature
23 Communication
12 VHF , HF(optional) component location
IDENT
12 VHF , HF(optional) System operation and Test
PERF
31 Passenger Address component location
IDENT
31 Passenger Address System operation and Test
PERF
42 Interphone component location
IDENT
42 Interphone System operation and Test
PERF
61 Static discharge inspection PERF
51 Communication cockpit indications and displays PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 12/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
24 Electrical power
21 AC Generation component location
REMOV
22 AC Generation System operation and Test
PERF
33 DC Generation component location
REMOV
32 DC Generation System operation and Test
PERF
41 External power component location
REMOV
42 External power System operation and Test
PERF
25 Electrical power cockpit indications and displays
PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 13/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
25 Equipment & Furnishing
00 à 56
Cabin : -Ceiling panels -General illumination -Seats -PSU -Galley Equipment -Galley/Lavatory water shut off valve
IDENT
61 à 63
Emergency equipment System operation and Test IDENT
CROAC PRES
ADEC PRES
61 Sliding Escape PRES
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 14/30
ATA Subject Task Code Date A/C
Immat.
Trainee’s
signature
Instructor’
s signature
26 Fire protection
00 Fire detection component location REMOV
11 Fire detection System operation and Test PERF
21 Extinguishing component location REMOV
21 Extinguishing System operation and Test PERF
21 re protection cockpit indications and displays PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 15/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
27 Flight Controls
10 Aileron system component location REMOV
11 Aileron system operation and Test PERF
21 Rudder system component location REMOV
22 Rudder system operation and Test PERF
33 Elevator system component location REMOV
33 Elevator system operation and test PERF
41 Horizontal stab system component location REMOV
42 Horizontal stab system operation and Test PERF
64 Liftdumper component location REMOV
64 Liftdumper operational test PERF
55 Flaps component location REMOV
55 Flaps (FCDU) system operation and test PERF
61 Speed brakes component location REMOV
61 Speed brakes operational test PERF
35 Stall protection system component location REMOV
35 Stall protection system operational test PERF
X Flight controls cockpit indications and displays
PERF
MTP PERF
MEL Items PRES
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 16/30
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 17/30
ATA Subject Task Code Date A/C
Immat.
Trainee’s
signature
Instructor’s
signature
28 Fuel
11 Fuel system component location REMOV
21 Distribution System operation and Test IDENT
21 Fuel cockpit indications and displays PERF
MTP PERF
MEL Items PRES
Fuel Tank Safety / CDCCL awareness PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 18/30
ATA Subject Task Code Date A/C
Immat.
Trainee’s
signature
Instructor’s
signature
29 Hydraulic power
11 Hydraulic system components location REMOV
13 Hydraulic system operation and Test PERF
00 Indication components location REMOV
00 Indication system operation and Test PERF
00 Hydraulic cockpit indications and displays PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 19/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
30 Ice & rain protection
00 Anti Ice component location REMOV
11 Anti Ice system controls and indication REMOV
11 Anti Ice system Test PERF
11 Anti Ice system cockpit indications and displays
PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 20/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
31 Indicating & recording system
11 Control Panel component location IDENT
51 FWC/MFDU/SAP operational test PERF
31 Recorders component location IDENT
31 Recorders System operation and Test
PERF
31 Clock setting PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 21/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
32 Landing Gear
11 Landing gear system component location
REMOV
41 Wheels Removal and installation
PERF
42 Brakes Removal and installation
PERF
48 Auto-brakes component location REMOV
48 Auto-brakes operational test PERF
51 Steering components location REMOV
X PSEU components location (see 31-41) REMOV
X PSEU operational test (see 31-41)
PERF
61 Landing gear cockpit indications and displays PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 22/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
33 Lights
00 Cockpit light component REMOV
10 Cockpit light operational test PERF
52 Emergency system operational test PERF
21 Cabin light operational test PERF
41-47 External lights operational test PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 23/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
34 Navigation
11 Probes location IDENT
12 Air Data Computers location REMOV
12 Overspeed Warning Clackers Test PERF
41 Weather Radar System components location REMOV
43 E/GPWS location and test PERF
46 TCAS location and test PERF
42 Radio Altimeter system components REMOV
51 VHF NAV receivers location IDENT
51 NAV antennas location IDENT
53 ADF System Components location
IDENT
54 ATC system components location
IDENT
52 DME System components location
IDENT
28 IRS system components location IDENT
61 FMS DATA BASE up date PERF
11 Pitot-static pressure tester Operation PERF
12 Navigation cockpit indications and displays
PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 24/30
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 25/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
35 Oxygen
11 Oxygen System components location
IDENT
11 Crew System operational test IDENT
21 PSU reconditioning PERF
21 Oxygen cockpit Indications and displays IDENT
21 Drop out functional test PERF
MTP PERF
MEL items PRES
Trouble Shooting OPT
Standart Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 26/30
ATA Subject Task Code Date A/C
Immat.
Trainee’s
signature
Instructor’s
signature
36 Pneumatic
11 Pneumatic system component location IDENT
12 Blow out panels location IDENT
11 Bleed Air valves functional test (TMSOV,PRSOV,OPSOV) PERF
20 Bleed air Pressure and Temperature indications in cockpit and MTP PERF
11 Bay overheat system Operational test PERF
23 Duct leak functional test PERF
MTP PERF
Trouble Shooting
OPT
Standard exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 27/30
ATA Subject Task Code Date A/C
Immat.
Trainee’s
signature
Instructor’s
signature
49 APU
10 APU component location REMOV
60 APU controls and indications REMOV
00 APU ECU test PERF
42 APU start up PERF
MEL Items PRES
Trouble Shooting
OPT
Standard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 28/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
52 Doors
00 Passenger /Crew, Emergency Exits, Cargo, Service component location / construction
IDENT
71 Door warning, component location REMOV
71 Door position cockpit indications and displays PERF
X Sliding Escape (see 25-61-03) REMOV
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
andard Exchange
OPT
REMARKS :
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 29/30
ATA Subject Task
Code Date
A/C
Immat.
Trainee’s
signature
Instructor’s
signature
71-80 Engine
72-31 Fan damage permited limits PRES
72-31 Fan blade standard exchange PRES
72-60 Accessory drives component location
IDENT
73-21 FCU Rigging PRES
77-41 Electrical Power supply component location
IDENT
71-00 Safety measures due to high tension during removal / installation and test procedures
PRES
78-31 Thrust Reverser component location
REMOV
78-00 Thrust reverser deactivation PERF
78-35 Thrust Reverser System operation and Test
PERF
78-35 Engine cockpit indications and displays PERF
MTP PERF
MEL Items PRES
Trouble Shooting
OPT
Maintenance Practice Training ManualF70/100 RR Tay
DOC.FOR.13 Ed 3 30/30
REMARKS :
top related