f70/100 rr tay maintenance practice training manual b1 … documentation... · maintenance practice...

Maintenance Practice Training ManualF70/100 RR Tay

DOC.FOR.13 Ed 3 1/30

F70/100 RR Tay MAINTENANCE PRACTICE

TRAINING MANUAL B1 LEVEL

DERICHEBOURG Atis aéronautique Parc Algorithmes, Immeuble Thalès – 17, Avenue Didier Daurat 31700 Blagnac

: 05 34 60 61 40 - : 05 34 60 61 50



TRAINEE SURNAME: Forename:

Licence number:

Experience on an aircraft with similar technology: YES NO

Signature: Date : / /

ON JOB TRAINING Type: B1 Starting date : / / Ending Date : / / Performed at :

DERICHEBOURG ATIS AÉRONAUTIQUE STAMP :

PRACTICAL ASSESSORS Licence

number/Stamp NAME Signature Date

Validation by Quality Department:

Date: Name: Signature:



SUBJECT The aim of this document is to record all the practical tasks performed by engineers within ATIS Aviation, PART 145 FR.145.107 approved maintenance organisation, in order to comply with the requirements of Appendix III of PART 66 to have the B1 rating on F70/100 RR tay aircraft.

Any task performed in the frame of this On Job Training (OJT) will have to be signed by the trainee engineer and validated by assessors. This OJT will be performed under the responsibility of one or more B1 qualified engineers. (See “PRE-REQUISIT” on page 4/38)

After this training, the engineer will be able to: - perform verifications of systems, engines, components and operational functions such as

specified in the maintenance manual, - analyse all information in order to make decisions regarding trouble shooting and corrective

actions as per maintenance manual, - describe the component replacement procedures specific to aircraft type.

DURATION - Engineer with B1 rating and six month experience on an aircraft with a similar technology: 70 hours(1),

- Engineer with B1 rating and less than six month experience on an aircraft with a similar technology: 140 hours(1),

- Engineer with no B1 rating on an aircraft with a similar technology: four months. (1)The 70/140 hours do not have to be necessarily performed in a row, but can be extended on a period adapted to operational configuration (availability of aircraft, trainee and assessors). CLASSIFICATION Classifies the importance of a task for the completion of the practical training record. Following classifications are used: - Mandatory (PERF/IDENT/PRES): This indicates that the related task is required for

completion of the practical training record. - Optional (REMOV/OPT): This indicates that the related task is optional. It is

recommended to perform at least 70% of those tasks in each ATA chapter. At least one trouble shooting among the major ATA (*) must be performed.

TASKS CODES - PERF: Perform - IDENT: Identification - REMOV: Remove - PRES: Presentation - OPT: Optional (Trouble Shooting or Standard Exchange)

At least one trouble shooting among the major ATA (*) must be performed. *) ATA major: 12 to 80.



SIGNING OFF THE TASKS Part 66 Appendix 3 paragraph 2.2 requires that the practical training element must consist of the performance of representative tasks and their assessment, in order to meet the following objectives:

a) Ensure safe performance of maintenance, inspections and routine work according to the maintenance manual and other relevant instructions and tasks as appropriate for the type of aircraft, for example troubleshooting, repairs, adjustments, replacements, rigging and functional checks such as engine run, etc, if required,

b) Correctly use all technical literature and documentation for the aircraft, c) Correctly use specialist/special tooling and test equipment, perform removal and

replacement of components The nominated trainer/assessor will sign off each task when satisfied that the trainee has attained the demonstrable level of understanding that is required. PRE-REQUISIT The trainee must have participated and succeeded in a PART 147 theoretical type rating training (T1/T2 training). The assessors must have an experience of five years in the line maintenance and two years in the qualification of type. For any OJT, the assessors will have to make a request by email at the Quality Department for validation of pre-requisit.



ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

00 Introduction

Aircraft Manuals and documentation PRES

Cockpit familiarisation and safety checks * PRES

MEL contents PRES

05 Time Limits/Maintenance Checks

20 Walk around, Weekly check, Routine check etc. PERF

51-00 Special Inspections (after abnormal events : hard or overweight landing, lightning strike or static discharge, bird strike or slush injection)

PRES

07 Lifting and Shoring

00 Aircraft jacking points/jacking procedure IDENT

REMARKS :



ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

09 Towing and Taxiing

00 Towing points / limitation of steering angle IDENT

10 Parking and Mooring

00 Engine / airframe blanking IDENT

11 Ground safety pins PERF

REMARKS :



ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

12 Servicing

11 Refuel / defuel procedure PERF

12-01 Hydraulic fluid servicing PERF

14-02 Landing gear fluid servicing PERF

13-02 IDG servicing PERF

13-04 APU Servicing PERF

13-01 Engine servicing PERF

13-05 Engine starter servicing IDENT

14-01 Hydraulic gas servicing PERF

14-02 Landing gear gas servicing IDENT

15-01 Potable water servicing PERF

16-01 Lavatory servicing PERF

11-04 Magnetic fuel Quantity Indicator reading PERF

X Hydraulic sampling (see 29-12-10-000-814-A) IDENT

X Ground air starter (see 36-13-00-ZZ2-810-A) PERF

11-01 Aircraft grounding points IDENT

13-03 Air-conditioning servicing IDENT

14-05 Nitrogen Stall System PERF

00 Oxygen servicing PERF

Trouble Shooting

OPT



Standard Exchange

OPT

REMARKS :



ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

21 Air Conditioning

00 Pressurisation Control component location REMOV

00 EFIS emergency cooling fan operational test PERF

20 Heating and Cooling component location

REMOV

61 Temperature Control component location

REMOV

33 Air conditioning System cockpit indications and displays

PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 10/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

22 Auto flight

00 Autopilot and yaw damper component location

IDENT

11 Autopilot and yaw damper System operation and Test

PERF

31 Auto throttle functional test PERF

41 AFCAS fault isolation using the MCC PERF

00 Auto flight cockpit indications and displays PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 11/30

ATA Subject Task Code

Date A/C

Immat.

Trainee’s

signature

Instructor’s signature

23 Communication

12 VHF , HF(optional) component location

IDENT

12 VHF , HF(optional) System operation and Test

PERF

31 Passenger Address component location

IDENT

31 Passenger Address System operation and Test

PERF

42 Interphone component location

IDENT

42 Interphone System operation and Test

PERF

61 Static discharge inspection PERF

51 Communication cockpit indications and displays PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 12/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

24 Electrical power

21 AC Generation component location

REMOV

22 AC Generation System operation and Test

PERF

33 DC Generation component location

REMOV

32 DC Generation System operation and Test

PERF

41 External power component location

REMOV

42 External power System operation and Test

PERF

25 Electrical power cockpit indications and displays

PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT


DOC.FOR.13 Ed 3 13/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

25 Equipment & Furnishing

00 à 56

Cabin : -Ceiling panels -General illumination -Seats -PSU -Galley Equipment -Galley/Lavatory water shut off valve

IDENT

61 à 63

Emergency equipment System operation and Test IDENT

CROAC PRES

ADEC PRES

61 Sliding Escape PRES

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT


DOC.FOR.13 Ed 3 14/30

ATA Subject Task Code Date A/C

Immat.

Trainee’s

signature

Instructor’

s signature

26 Fire protection

00 Fire detection component location REMOV

11 Fire detection System operation and Test PERF

21 Extinguishing component location REMOV

21 Extinguishing System operation and Test PERF

21 re protection cockpit indications and displays PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 15/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

27 Flight Controls

10 Aileron system component location REMOV

11 Aileron system operation and Test PERF

21 Rudder system component location REMOV

22 Rudder system operation and Test PERF

33 Elevator system component location REMOV

33 Elevator system operation and test PERF

41 Horizontal stab system component location REMOV

42 Horizontal stab system operation and Test PERF

64 Liftdumper component location REMOV

64 Liftdumper operational test PERF

55 Flaps component location REMOV

55 Flaps (FCDU) system operation and test PERF

61 Speed brakes component location REMOV

61 Speed brakes operational test PERF

35 Stall protection system component location REMOV

35 Stall protection system operational test PERF

X Flight controls cockpit indications and displays

PERF

MTP PERF

MEL Items PRES


DOC.FOR.13 Ed 3 16/30

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 17/30


Immat.

Trainee’s

signature

Instructor’s

signature

28 Fuel

11 Fuel system component location REMOV

21 Distribution System operation and Test IDENT

21 Fuel cockpit indications and displays PERF

MTP PERF

MEL Items PRES

Fuel Tank Safety / CDCCL awareness PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 18/30


Immat.

Trainee’s

signature

Instructor’s

signature

29 Hydraulic power

11 Hydraulic system components location REMOV

13 Hydraulic system operation and Test PERF

00 Indication components location REMOV

00 Indication system operation and Test PERF

00 Hydraulic cockpit indications and displays PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 19/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

30 Ice & rain protection

00 Anti Ice component location REMOV

11 Anti Ice system controls and indication REMOV

11 Anti Ice system Test PERF

11 Anti Ice system cockpit indications and displays

PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 20/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

31 Indicating & recording system

11 Control Panel component location IDENT

51 FWC/MFDU/SAP operational test PERF

31 Recorders component location IDENT

31 Recorders System operation and Test

PERF

31 Clock setting PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 21/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

32 Landing Gear

11 Landing gear system component location

REMOV

41 Wheels Removal and installation

PERF

42 Brakes Removal and installation

PERF

48 Auto-brakes component location REMOV

48 Auto-brakes operational test PERF

51 Steering components location REMOV

X PSEU components location (see 31-41) REMOV

X PSEU operational test (see 31-41)

PERF

61 Landing gear cockpit indications and displays PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 22/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

33 Lights

00 Cockpit light component REMOV

10 Cockpit light operational test PERF

52 Emergency system operational test PERF

21 Cabin light operational test PERF

41-47 External lights operational test PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 23/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

34 Navigation

11 Probes location IDENT

12 Air Data Computers location REMOV

12 Overspeed Warning Clackers Test PERF

41 Weather Radar System components location REMOV

43 E/GPWS location and test PERF

46 TCAS location and test PERF

42 Radio Altimeter system components REMOV

51 VHF NAV receivers location IDENT

51 NAV antennas location IDENT

53 ADF System Components location

IDENT

54 ATC system components location

IDENT

52 DME System components location

IDENT

28 IRS system components location IDENT

61 FMS DATA BASE up date PERF

11 Pitot-static pressure tester Operation PERF

12 Navigation cockpit indications and displays

PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT


DOC.FOR.13 Ed 3 24/30

REMARKS :


DOC.FOR.13 Ed 3 25/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

35 Oxygen

11 Oxygen System components location

IDENT

11 Crew System operational test IDENT

21 PSU reconditioning PERF

21 Oxygen cockpit Indications and displays IDENT

21 Drop out functional test PERF

MTP PERF

MEL items PRES

Trouble Shooting OPT

Standart Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 26/30


Immat.

Trainee’s

signature

Instructor’s

signature

36 Pneumatic

11 Pneumatic system component location IDENT

12 Blow out panels location IDENT

11 Bleed Air valves functional test (TMSOV,PRSOV,OPSOV) PERF

20 Bleed air Pressure and Temperature indications in cockpit and MTP PERF

11 Bay overheat system Operational test PERF

23 Duct leak functional test PERF

MTP PERF

Trouble Shooting

OPT

Standard exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 27/30


Immat.

Trainee’s

signature

Instructor’s

signature

49 APU

10 APU component location REMOV

60 APU controls and indications REMOV

00 APU ECU test PERF

42 APU start up PERF

MEL Items PRES

Trouble Shooting

OPT

Standard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 28/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

52 Doors

00 Passenger /Crew, Emergency Exits, Cargo, Service component location / construction

IDENT

71 Door warning, component location REMOV

71 Door position cockpit indications and displays PERF

X Sliding Escape (see 25-61-03) REMOV

MTP PERF

MEL Items PRES

Trouble Shooting

OPT

andard Exchange

OPT

REMARKS :


DOC.FOR.13 Ed 3 29/30

ATA Subject Task

Code Date

A/C

Immat.

Trainee’s

signature

Instructor’s

signature

71-80 Engine

72-31 Fan damage permited limits PRES

72-31 Fan blade standard exchange PRES

72-60 Accessory drives component location

IDENT

73-21 FCU Rigging PRES

77-41 Electrical Power supply component location

IDENT

71-00 Safety measures due to high tension during removal / installation and test procedures

PRES

78-31 Thrust Reverser component location

REMOV

78-00 Thrust reverser deactivation PERF

78-35 Thrust Reverser System operation and Test

PERF

78-35 Engine cockpit indications and displays PERF

MTP PERF

MEL Items PRES

Trouble Shooting

OPT


DOC.FOR.13 Ed 3 30/30

REMARKS :

f70/100 rr tay maintenance practice training manual b1 … documentation... · maintenance practice...

Documents