dsm neoresins adhesive challenge

The curious case of E-850

A breakthrough innovation of

DSM NeoResins requesting your help

E-850???

What the hell is E-850?

http://www.seoconsultants.com/links/images/no-clue-2x.gif

E - 850 is a new adhesive resin

E - 850 is a new adhesive resin

What is adhesive?

E - 850 is a new adhesive resin

Image: www.culture24.org.uk/asset_arena/1/34/54/145431/v0_master.jpg

What is adhesive?Well, this tape is adhesive ;-)

E - 850 is a new adhesive resin

Image: www.culture24.org.uk/asset_arena/1/34/54/145431/v0_master.jpg

What is a resin? What is adhesive?Well, this tape is adhesive ;-)

E - 850 is a new adhesive resin

Image: www.culture24.org.uk/asset_arena/1/34/54/145431/v0_master.jpg

http://www.treehugger.com/resin-pellets.jpg

What is a resin? What is adhesive?

Image: http://tozzymodif.files.wordpress.com/2009/01/resin-bag-01.jpg

Well, this tape is adhesive ;-) These are resins.

This still doesn’t make sense, right?

It is simple,E-850 is a new main component for glue developed by

http://karthik82.files.wordpress.com/2006/07/sticky_alien_goo-large.jpg

E-850

http://formorethanprofit.files.wordpress.com/2008/02/asleep-at-desk.jpg

It suffers less from fatigueE-850

http://formorethanprofit.files.wordpress.com/2008/02/asleep-at-desk.jpg

It suffers less from fatigue

&

E-850

http://formorethanprofit.files.wordpress.com/2008/02/asleep-at-desk.jpg

It suffers less from fatigue

http://www.rd.com/images/tfhimport/2004/20040501_Glue_Tips_page001img001.jpg

It is very strong

&

E-850

E-850

It is water borne

E-850

It is water borne

It is formaldehyde

E-850

It is water borne

E-850It is formaldehyde free!!..

It is water borneIt is VOC-Free

E-850It is formaldehyde free!!..

However...One

important issue

remains

http://www.simonstapleton.com/wordpress/wp-content/uploads/2009/07/one-finger.jpg

During application of a water borne lacquer,

de-lamination occurs at the edges of the laminate....

http://areweconnected.com/images/NeedHelp.jpg

During application of a water borne lacquer,

de-lamination occurs at the edges of the laminate....

http://areweconnected.com/images/NeedHelp.jpg

and so far, we cannot solve this....

This is what happens...

11

...and this is what we

tried and learned

ourselves already

11

The adhesive film does not dissolve in water

Conclusion: The adhesive itself is not water sensitive

...and this is what we

tried and learned

ourselves already

11

The adhesive film does not dissolve in water

Conclusion: The adhesive itself is not water sensitive

...and this is what we

tried and learned

ourselves already

There is still adhesive present on the two delaminated sides

Conclusion: Adhesion to wood is good enough

11

The adhesive film does not dissolve in water

Conclusion: The adhesive itself is not water sensitive

...and this is what we

tried and learned

ourselves already

Delamination also occurs by applying water instead of the lacquer

Conclusion: Water is responsible for delamination, not an ingredient in the lacquer

There is still adhesive present on the two delaminated sides

Conclusion: Adhesion to wood is good enough

11

The adhesive film does not dissolve in water

Conclusion: The adhesive itself is not water sensitive

...and this is what we

tried and learned

ourselves already

Delamination also occurs by applying water instead of the lacquer

Conclusion: Water is responsible for delamination, not an ingredient in the lacquer

There is still adhesive present on the two delaminated sides

Conclusion: Adhesion to wood is good enough

Without lacquer, the

mechanical properties of the laminate are good and outperform current adhesives --

> the adhesive is strong enough

11

The adhesive film does not dissolve in water

Conclusion: The adhesive itself is not water sensitive

...and this is what we

tried and learned

ourselves already

Delamination most probably does not occur during application

of the lacquer, but only during/after drying.

Delamination also occurs by applying water instead of the lacquer

Conclusion: Water is responsible for delamination, not an ingredient in the lacquer

There is still adhesive present on the two delaminated sides

Conclusion: Adhesion to wood is good enough

Without lacquer, the

mechanical properties of the laminate are good and outperform current adhesives --

> the adhesive is strong enough

So this is where we

need

you!!

Text

http://i.pbase.com/u40/lindarocks/upload/26355129.sledgehammersmall.jpg

Do you know how to potentially crack this case?

Text

http://i.pbase.com/u40/lindarocks/upload/26355129.sledgehammersmall.jpg

Do you know how to potentially crack this case?

Help us and win!

We offer a reward of 10.000 euro if

you solve this case...

Interested? See below for contact

details!

For more info:Twitter: @neoresins

Email: info.neoresins@dsm.comWeb: www.dsm.com/en_US/html/dnr/2009_news.htm

picture on Flickr by thevoyager

Developed by:

this slideshow was made by @szwerink