basic gates discussion d2.1. basic gates not gate and gate or gate xor gate nand gate nor gate xnor...

Basic Gates

Discussion D2.1

Basic Gates

• NOT Gate

• AND Gate

• OR Gate

• XOR Gate

• NAND Gate

• NOR Gate

• XNOR Gate

Y = !XY = not XY = ~XY = X'

Basic Gates

NOT

X Y

01

10

X

YZ

X Y

X Y

Z

AND

OR

X Y Z0 0 00 1 01 0 01 1 1

X Y Z0 0 00 1 11 0 11 1 1

Z = X & YZ = X and YZ = X * Y

Z = XY

Z = X # YZ = X or YZ = X | YZ = X + Y

Any logic circuit can be created using only these three gates

NOT Gate

X not X not not X = X

X not X not not X0 1 01 0 1

Behavior:The output of a NOT gate is the inverse (one’s complement) of the input

AND Gate

X(1)X(2)

X(n)

ZAND

Behavior:The output of an AND gate is HIGH only if all inputs are HIGH

Z = X(1) and X(2) and …. and X(n)

4-Input AND GateX(1)

X(2)

X(3)

X(4)

Z

X(1)

X(2)

X(4)

ZANDX(3)

X(1)

X(2)

X(3)

X(4)

Z

3-Level

2-Level

Behavior:Z := '1';for i in 1 to 4 loop Z := Z and X(i);end loop;

std_logic_1164.vhd TYPE std_ulogic IS ( 'U', -- Uninitialized 'X', -- Forcing Unknown

'0', -- Forcing 0 '1', -- Forcing 1 'Z', -- High Impedance

'W', -- Weak Unknown 'L', -- Weak 0 'H', -- Weak 1 '-' -- Don't care );

SUBTYPE std_logic IS resolved std_ulogic;

SUBTYPE UX01 IS resolved std_ulogic RANGE 'U' TO '1'; -- ('U','X','0','1')

std_logic_1164.vhd -- truth table for "and" function CONSTANT and_table : stdlogic_table := ( -- ---------------------------------------------------- -- | U X 0 1 Z W L H - | | -- ---------------------------------------------------- ( 'U', 'U', '0', 'U', 'U', 'U', '0', 'U', 'U' ), -- | U | ( 'U', 'X', '0', 'X', 'X', 'X', '0', 'X', 'X' ), -- | X | ( '0', '0', '0', '0', '0', '0', '0', '0', '0' ), -- | 0 | ( 'U', 'X', '0', '1', 'X', 'X', '0', '1', 'X' ), -- | 1 | ( 'U', 'X', '0', 'X', 'X', 'X', '0', 'X', 'X' ), -- | Z | ( 'U', 'X', '0', 'X', 'X', 'X', '0', 'X', 'X' ), -- | W | ( '0', '0', '0', '0', '0', '0', '0', '0', '0' ), -- | L | ( 'U', 'X', '0', '1', 'X', 'X', '0', '1', 'X' ), -- | H | ( 'U', 'X', '0', 'X', 'X', 'X', '0', 'X', 'X' ) -- | - | );

FUNCTION "and" ( l : std_ulogic; r : std_ulogic ) RETURN UX01 IS BEGIN

RETURN (and_table(l, r)); END "and";

OR Gate

Behavior:The output of an OR gate is LOW only if all inputs are LOW

Z = X(1) or X(2) or …. or X(n)

X(1)

X(2)

X(n)

ZOR

4-Input OR Gate

X(1)

X(2)

X(4)

ZORX(3)

X(1)

X(2)

X(3)

X(4)

Z

3-Level

2-Level

Behavior:Z := '0';for i in 1 to 4 loop Z := Z or X(i);end loop;

X(1)

X(2)

X(3)

X(4)Z

Exclusive-OR (XOR) Gate

Behavior:The output of an XOR gate is HIGH only if the number of HIGH inputs is ODD

Z = X(1) xor X(2) xor …. xor X(n)

X(1)

X(2)

X(n)

ZXOR

2-Input XOR Gate

XOR X Y Z0 0 00 1 11 0 11 1 0

Z = X $ YZ = X ^ YZ = X xor YZ = X @ Y

X Y

Z

Note: if Y = 0, Z = Xif Y = 1, Z = not X

Therefore, an XOR gate can be used as a controlled inverter

Z X Y

4-Input XOR Gate

X(1)

X(2)

X(4)

ZXORX(3)

X(1)

X(2)

X(3)

X(4)

Z

3-Level

2-Level

Behavior:Z := '0';for i in 1 to 4 loop Z := Z xor X(i);end loop;

X(1)

X(2)

X(3)

X(4)Z

Note: Z = 1 if the number of 1 inputs in ODD

NAND Gate (NOT-AND)

Behavior:The output of an NAND gate is LOW only if all inputs are HIGH

Z = not (X(1) and X(2) and …. and X(n))

X(1)

X(2)

X(n)

ZNAND

2-Input NAND GateNAND

X

YZ

Z = !(X & Y)Z = X nand YZ = ~(X * Y)

X Y Z0 0 10 1 11 0 11 1 0

NOR Gate (NOT – OR)

Behavior:The output of an NOR gate is HIGH only if all inputs are LOW

Z = not (X(1) or X(2) or …. or X(n))

X(1)

X(2)

X(n)

ZNOR

2 Input NOR Gate

NOR

XY

Z

Z = !(X # Y)Z = X nor YZ = ~(X + Y)

X Y Z0 0 10 1 01 0 01 1 0

NAND Gate

X

Y

X

Y

Z Z

Z = (X * Y)' Z = X' + Y'

=

X Y W Z0 0 0 10 1 0 11 0 0 11 1 1 0

X Y X' Y' Z0 0 1 1 10 1 1 0 11 0 0 1 11 1 0 0 0

De Morgan’s Theorem-1

(X * Y)' = X' + Y'

• NOT all variables• Change * to + and + to *• NOT the result

NOR Gate

X

YZ

Z = (X + Y)'

X Y Z0 0 10 1 01 0 01 1 0

X

YZ

Z = X' * Y'

X Y X' Y' Z0 0 1 1 10 1 1 0 01 0 0 1 01 1 0 0 0

De Morgan’s Theorem-2

(X + Y)' = X' * Y'

• NOT all variables• Change * to + and + to *• NOT the result

Exclusive-NOR Gate XNOR (NOT – XOR)

Behavior:The output of an XNOR gate is HIGH only if the number of HIGH inputs is EVEN

Z = not (X(1) xor X(2) xor …. xor X(n))

X(1)

X(2)

X(n)

ZXNOR

2-Input XNOR Gate

XNOR X Y Z0 0 10 1 01 0 01 1 1

Z = !(X $ Y)Z = X xnor YZ = ~(X @ Y)

Note: Z = 1 if X = Y

Therefore, an XNOR gate can be used as an equality detector

XY

Z

Z X Y

X(0)

X(1)

X(2)

X(3)

Z(1)

Behavior of multiple input gates

andd: process(X)variable Y: STD_LOGIC;begin

Y := '1';for i in 0 to 3 loop

Y := Y and X(i);end loop;Z(1) <= Y;

end process;

Behavior of multiple input gates

X(0)’

X(1)’

X(2)’

X(3)’Z(2)

X(0)

X(1)

X(n)

Z(2)NAND=

-- 4-input nand gate -- DeMorgan's Theoremnandd: process(X)variable Y: STD_LOGIC;begin

Y := not X(0);for i in 1 to 3 loop

Y := Y or (not X(i));end loop;Z(1) <= Y;

end process;

Behavior of multiple input gates

X(0)

X(1)

X(2)

X(3)Z(3)

X(0)’

X(1)’

X(2)’

X(3)’

Z(4)

orr: process(X)variable Y: STD_LOGIC;begin

Y := '0';for i in 0 to 3 loop

Y := Y or X(i);end loop;Z(3) <= Y;

end process;

norr: process(X)variable Y: STD_LOGIC;begin

Y := not X(0);for i in 1 to 3 loop

Y := Y and (not X(i));end loop;Z(4) <= Y;

end process;

xorr: process(X)variable Y: STD_LOGIC;begin

Y := X(0);for i in 1 to 3 loop

Y := Y xor X(i);end loop;Z(5) <= Y;

end process;

xnorr: process(X)variable Y: STD_LOGIC;begin

Y := X(0);for i in 1 to 3 loop

Y := Y xnor X(i);end loop;Z(6) <= Y;

end process;

Behavior of multiple input gatesX(0)

X(1)

X(2)

X(3)Z(5)

X(0)

X(1)

X(2)

X(3)Z(6)

andnandornorxorxnor