baker lab room 139. presentation mode select select mode for presentation choices are: auto mode 1...

Baker Lab Room 139

Presentation Mode Select

• Select ModeFor

presentationChoices are:• Auto Mode 1• Auto Mode 2• Auto Mode 3• Manual Mode• Video

Conference

Press AUTOMATIC MODE 1

Auto Mode 1 Setup• Chose Mics

Press START PRESENTATION

• Lectern Gooseneck/Boundary• RoomOverhead/Students/Table•WirelessTracking/Handheld/Lav

• Chose Remote• Remote Mouse • “Auto Mode”

Auto Mode 1 System Info

• All Visual Media on Center Screen• VCR, DVD, Document Camera• Lectern Computer, Laptop• Room Cameras• Center Slide Projector• Mics and Playback Audio• Audio Conference

Auto Mode 1 Main Page

Select Visual Source Here

Select Audio Source Here

TouchWindowto Make Picture Full View

Auto 1 Pop Up Controls

Press EXIT when done……….

Presentation Mode Select

• Select ModeFor

presentationChoices are:• Auto Mode 1• Auto Mode 2• Auto Mode 3• Manual Mode• Video

Conference

Press AUTOMATIC MODE 2

Auto Mode 2 Setup• Chose Mics

Press START PRESENTATION

• Lectern Gooseneck/Boundary• RoomOverhead/Students/Table•WirelessTracking/Handheld/Lav

• Chose Remote• Remote Mouse • “Auto Mode”

Auto Mode 2 System Info

• All Video Media on Center Screen• VCR, DVD, Document Camera• Lectern Computer, Laptop• Room Cameras• Left and Right Slide Projectors• Mics and Playback Audio• Audio Conference

Auto Mode 2 Main Page

Auto 2 Pop Up Controls

Press EXIT when done……….

Presentation Mode Select

• Select ModeFor

presentationChoices are:• Auto Mode 1• Auto Mode 2• Auto Mode 3• Manual Mode• Video

Conference

Press AUTOMATIC MODE 3

Auto Mode 3 Setup• Chose Mics

Press START PRESENTATION

• Lectern Gooseneck/Boundary• RoomOverhead/Students/Table•WirelessTracking/Handheld/Lav

• Chose Remote• Remote Mouse • “Auto Mode”

Auto Mode 3 System Info• Slide Projectors, VCR, DVD and

Cameras are not available• Document Camera is on the Stage Left Screen• Lectern Computer is on the Center

Screen• Laptop Computer is on the Stage

Right Screen• Mics and Playback Audio• Audio Conference

Auto Mode 3 Main Page

Auto 3 Pop Up Controls

Press EXIT when done……….

Presentation Mode Select

• Select ModeFor

presentationChoices are:• Auto Mode 1• Auto Mode 2• Auto Mode 3• Manual Mode• Video

Conference

Press MANUAL MODE

Manual Mode System Info

• You can manually route sources to destinations…… in fact, you have to.

• All sources on left hand column• Projectors (destinations) on top.• Slide Projector control w/ modes.• Mics and Playback Audio• Audio Conference

Manual Mode Main Page

Select Visual Source Here

Select Audio Source Here

Chose which Projector to monitor Source from Here

Select Slide Source Here

Manual Mode Pop Up Controls

Press Exit to continue……….

Manual Slide Page

Select Projector Here

Chose Slide Mode Here

Manual Slide Pop Up Controls

Press Back to Return to Manual Main Page……….

Presentation Mode Select

• Select ModeFor

presentationChoices are:• Auto Mode 1• Auto Mode 2• Auto Mode 3• Manual Mode• Video

Conference

Press VIDEO CONFERENC MODE

Video Conference Mode System Info

• Slide Projectors no available• All sources on left hand column• Far End on Stage Left• Near End on Stage Right• Monitor Far End and Near End on Touch

Panel and Rear Plasma Displays• Cameras Become Important• Quad Splitter Available• Mics and Playback Audio• Audio Conference

Video Conference Mode Page

Select Visual Source Here

Select Audio Source Here

Select Quad Sources Here

Video from Room 139

Video from “Far Site”

Activate Student Cam Buttons

Video Conference Pop Up Controls

Press Exit to continue……….

ISDN CODEC Pop Up Controls

Press Exit to continue……….

Mic Position Main Page

Chose which Projector to monitor Source from Here

Press Exit

Exit Mode Select

• To Mode Select – Return you to that page

• No – Will Return to previous page

• Yes – Will Shut down System

REMOVE VIDEO TAPE AND/OR DVD NOW !!

System is shutting off now….

• The projectors will stay on for 5 minutes – there is a countdown timer on the “Welcome” screen of the touch panel

• The room can be restarted while the countdown is happening.

• If the countdown ends, the system is off. You must wait approx. 2 minutes to restart the system to allow the projectors to cool.

(the fans will shut off when done)

PLEASE REMEMBER TO SHUT OFF THE SYSTEM WHEN YOU ARE DONE….

Tah Dah !!!