auto index engineersmassey ferguson 200 series: 265, 275, 285, 290, 298 300 series: 350, 362, 365,...
Post on 05-Feb-2020
18 Views
Preview:
TRANSCRIPT
STANDARD TOP LINK ASSEMBLY
METRIC TOP LINK ASSEMBLIES
SPECIAL M/F TOP LINK ASSEMBLIES
MF TOP LINK ASSEMBLY
TOP LINK ASSEMBLY ZETOR/ URSUS
TOP LINK ASSEMBLY (DEUTZ)
TOP LINK ASSEMBLY MTZ-UMZ
TOP LINK ASSEMBLY MTZ-UMZ
TOP LINK ASSEMBLY FORD
TOP LINK ASSEMBLY JOHN DEERE
TOP LINK ASSEMBLY HEAVY DUTY
FORGED TOP LINK REPLACEMENT ENDS
TOP LINK END (UNC)
LOCKING COLLARS
CENTER TUBES
DRAWBARS
SWINGING DRAWBAR ASSEMBLY
SWINGING DRAWBAR WITH CLEVIS
SWINGING DRAWBAR
LIFT ARM ASSEMBLY
LOWER LINK LIFT ARM (CAT. 1)
LOWER LINK LIFT ARM (CAT. 1/1)
LOWER LINK LIFT ARM (CAT. 2)
LOWER LINK LIFT ARM (CAT 1) , LH/RH
LOWER LINK LIFT ARM (CAT. 2)
LOWER LINK LIFT ARM, RH (CAT. 2/2)
WELD ON END
WELD ON END BEND TYPE (URSUS)
LOWER LINK BALL END FLAT TYPE
PRODUCT NAME PAGE NO. PRODUCT NAME PAGE NO.
01
02
02
03
03
03
03
04
04
04
04
05
05
05
06
06
07
07
07
08
08
08
08
08
09
09
10
11
11
AutoEngineers INDEX
BALL JOINT WITH SLOT
WELD ON END WITH BASE
TOP LINK BALL END WITH CENTERING PIN
TOP LINK WELD ON BALL ENDS
LIFT ARM BALL SOCKETS
REPLACEMENT BALL
TOP LINK REPLACEMENT BALL
BALL WITH CUT
DUAL CATEGORY BALL
GUIDE CONE BALL
HITCH BALLS
CONVERSION BUSHES
LEVELLING BOX ASSEMBLY
LEVELLING BOX YOKE ASSEMBLY
STABLIZER CHAIN FORD
STABILIZER CHAIN ASSEMBLIES (M.F.)
UNIVERSAL STABILIZER CHAIN ASSLY. (UTB)
STABILIZER CHAINS
3 POINT LINKAGE KIT
REAR LINKAGE QUICK HITCH (A-FRAME)
REAR LINKAGE QUICK HITCH (COUNTER-FRAME)
URSUS TRACTOR PARTS
UNIVERSAL STABILIZER ARM
STABILIZER BRACKET
STAY STRAP
ADJUSTABLE STABILIZER ARM
RATCHET JACKS
DRILL DRAG CHAIN
SHAFT LOCKING COLLARS
11
12
12
12
12
13
13
13
14
14
14
14
15
15
17
17
17
17
18
19
19
20
21
21
21
21
22
22
22
ADAPTER BUSHINGS
TOP LINK PINS
FORGED LIFT ARM PIN
DUAL CATEGORY PINS
STABILIZER PINS
ADJUSTABLE LIFT ARM PINS
T HANDLE CLEVIS PINS
SAFETY LOCK HITCH PINS
HYDRAULIC CYLINDER PINS
BENT HITCH PINS
HITCH PINS SWIVEL HANDLE
HITCH PINS SWIVEL HANDLE WITH CHAIN
DROP FORGED GRADE 5 HITCH PINS
RED / BLUE HITCH PIN
SWIVEL TOGGLE LOCK HITCH PIN
RING DETENT PIN
CLEVIS TYPE DRAW PINS
GENERAL PURPOSE CLEVISES
STRAIGHT CLEVISES
TWISTED CLEVISES
FARM CLEVISES
CHECK CHAIN CLEVIS EYE BOLT
CHECK CHAIN CLEVIS
TINE BUSHES
SLEEVE INCREASERS
REDUCTION WITH SLOT & WITHOUT SLOT
OVER RUNNING CLUTCH
SHORT INCREASER/GROOVED SLEEVE
PTO SPLINE ADAPTER
QUICK RELEASE PTO ADAPTER EXTENDER
PRODUCT NAME PAGE NO. PRODUCT NAME PAGE NO.
22
23
23
24
24
24
24
25
25
25
25
26
26
26
27
27
28
28
28
28
29
29
29
29
30
30
30
30
31
31
AutoEngineers INDEX
PTO Adaptor For KUBOTA/ MITSUBISHI/ ISEKI TRACTOR
PTO YOKE PIN
LYNCH PINS
PTO LOCKING PINS ROUND
PTO LOCKING PINS SQAURE
HAIR PINS / R CLIPS
DOUBLE R CLIPS
LYNCH PINS WITH SPRING LOCK
COTTER PINS
SLOTTED SPRING PIN
GREASE FITTINGS
E-RING CLIPS
RETAINING RINGS
WOODRUFF KEY
SQUARE MACHINERY KEY
MACHINERY BUSHINGS (NARROW/ WIDE)
HEX CUP POINT SOCKET SET SCREW
SQUARE HEAD SET SCREW
O RINGS
ADJUSTABLE CLEVIS PINS
HAIR PINS OR R PINS
CYLINDER STROKE CONTROL SEGMENTS
EXHAUST/ MUFFLER CLAMP
EXHAUST WEATHER CAP
MUFFLER CLAMP
BONNET CLAMP WITH KIT
DRAG HARROW CHAIN
FORGED HARROW TOOTH
31
31
32
32
33
33
33
33
34
34
34
35
35
35
36
36
36
37
37
38
38
38
39
39
39
39
40
40
CASTING HARROW TOOTH
POST DRIVER
DISC BLADE
TIE ROD ENDS
DRAG LINK
SOIL DRILL
AGRICULTURE MACHINE RACK / LEVERS
QUICK REPAIR BUSHING
Battery Terminals
Steering Wheel Spinners
Steering Wheel Spinners In Plastic
FASTENERS:
HEX BOLT
NUTS
STUDS
THREADED ROD
WASHERS
SPRING WASHERS
SOCCKET HEAD PRODUCTS
HAND TOOLS:
SPANNERS
WHEEL SPANNER
L TYPE SPANNER
PIPE WRENCH
ADJUSTABLE WRENCH
PLIERS
HAMMERS
HEX ALLEN KEY
PRODUCT NAME PAGE NO. PRODUCT NAME PAGE NO.
40
40
41
42
42
42
42
42
43
43
43
44
44
45
45
46
46
47
48
49
49
49
49
49
50
50
AutoEngineers INDEX
SCREW DRIVER
LUBRICATION EQUIPMENTS
OIL CAN
PLASTIC OIL BOTTLE
GREASE GUN- PUSH TYPE
GREASE GUN- PISTOL TYPE
GREASE GUN- LEVER TYPE
50
51
51
51
51
51
Standard Top Link Assembly Standard Duty Top Links in Cat 0,1, 1&2 Combination, 2&3 Sizes. Yellow Zinc Dichromate Plated Centre Tube and Clear Zinc Plated Repair Ends Unless Otherwise Specified.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 01
AutoEngineers
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com02
Metric Top Link AssembliesStandard Duty Top Links in Cat 0,1, 1&2 Combination, 2&3 Sizes. Yellow Zinc Dichromate Plated Centre Tube and Clear Zinc Plated Repair Ends Unless Otherwise Specified.
TOP LINK ASSEMBLY HEAVY DUTYStandard Duty Top Links in Cat 1, 1&2 Combination, 2&3 Sizes. Yellow Zinc Dichromate Plated/ Powder Coated Centre Tube and Clear Zinc Plated Repair Ends Unless Otherwise Specified.
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 03
Special Top Link Assemblies :MF Top Link AssemblyTop Link Assembly Zetor/ Ursus
Top Link Assembly (DEUTZ) Top Link Assembly Mtz-umz
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com04
Top Link Assembly MTZ-UMZ
Top Link Assembly John Deere
Top Link Assembly Heavy DutyJD 6000 Series- Cast Pipe
Top Link Assembly Ford
Forged Top Link Replacement EndsForged Top Link Replacement Ends for Cat 0,1,2 & 3 Top Links. Yellow Zinc Plated.
Our Top Link Ends are made from highest grade of metals & alloys. Ends are tested in labs on different parameters like dimensional accuracy, tensile strength, resistance property etc. All are available in METRIC & UNC Threads as per customer drawing or sample.
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 05
TOP LINK END (UNC) Locking Collars
Locking Collars are used for locking centre tube of Top Link Assembly.
Available in all kinds of Thread size.
Color Yellow Zinc Plated.
Drawbars
We offer high quality draw bars for safe and comfortable towing. Our range of drawbars are made from highest grade of metal and alloys that ensures a long life performance. We specializes in manufacturing both cross type as well as swinging draw bars in diverse specifications.
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com06
Center TubesCenter Tubes for all kinds of Top Link Assembly & Stabilizer Chains.
* Note : Available in yellow zinc plated & colored powder coated as per requirement. Thread size as per drawing or sample. Available in all sizes as per customer requirements
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com08
This Lower Link Lift Arm (Cat. 1)fitsFord new holland, Fordson, Dexta, super dexta
Massey Ferguson100 Series: 133, 135, 135 Petrol, 140, 148, 152
Lower Link Lift Arm (Cat. 1)
This Lower Link Lift Arm (Cat. 2)fitsMassey Ferguson100 Series: 133, 135, 135 Petrol, 148, 152200 Series: 230, 235, 240, 245, 250300 Series: 340 500 Series: 550
Lower Link Lift Arm (Cat. 2)
This Lower Link Lift Arm (Cat. 1)fitsMassey Ferguson : 35, 35 Petrol
Lower Link Lift Arm (Cat. 1/1)
This Lower Link Lift Arm (Cat. 1)fitsFord New Holland10 Series : 2610, 2810, 2910, 3610, 3910, 4110, 4610100 Series : 2600, 3600, 46001000 Series : 2000, 2100, 2110, 2120, 2150, 2310, 3000, 3100, 3120, 3310,
3330, 4000, 4140
Lower Link Lift Arm (Cat 1) , LH/RH
Lift Arm Assembly
Our category 1 right or left hand forged lift arm contains 7/8" pin holes, 31-3/4" overall length and comes in red. Lift arms fit all Ferguson models, Ford 2N, 8N, 9N, NAA, Massey-Ferguson 35, 50, Oliver 550 and Oliver 3-point conversion and John Deere 1010.
Lift Arm Assembly
Our category 1 right or left hand forged lift arm contains 7/8" pin holes, center to center 800 mm length. Lift arms fit Ford New Holland: 10 Series, 100 series, 1000 series
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 09
This Lower Link Lift Arm (Cat. 2)fitsFord New HollandFordson, Major, Power Major
Lower Link Lift Arm (Cat. 2)This Lower Link Lift Arm (Cat. 2)fitsMassey Ferguson: 165
Lower Link Lift Arm (Cat. 2)
This Lower Link Lift Arm (Cat. 1)fitsMassey Ferguson200 Series: 265, 275, 285, 290, 298300 Series: 362, 365, 372, 375, 382, 390, 398, 399500 Series: 575, 590600 Series: 675, 690, 698, 699
Lower Link Lift Arm, RH (Cat. 2/2)
This Lower Link Lift Arm (Cat. 1)fitsMassey Ferguson200 Series: 265, 275, 285, 290, 298300 Series: 362, 365, 372, 375, 382, 390, 398, 399500 Series: 575, 590600 Series: 675, 690, 698, 699
Lower Link Lift Arm, LH (Cat. 2/2)
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com10
WELD ON END
WELD ON END
WELD ON END
AutoEngineers
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 11
WELD ON END
WELD ON END BEND TYPE (URSUS)
LOWER LINK BALL END FLAT TYPE
BALL JOINT WITH SLOT
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com12
Lift Arm Ball SocketsWeld-on lift arm Ball Sockets to fit cat 0 through cat 3 tractors. Yellow zinc dichromate plated or black phosphate finish.
WELD ON END WITH BASE TOP LINK BALL END WITH CENTERING PIN
Top Link Weld on Ball EndsForged Top Link Weld-on Ball Ends for Cat 1 & Cat 2 Tractors. Black Phosphate Housing and Zinc Plated Ball.
Replacement Ball
Ball with Cut
AutoEngineers
Top Link Replacement Ball
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 13
Dual Category Ball
Replacement Balls for Cat 0,1,2 & 3 Hardened Yellow Zinc Plated. Ball also available with cut.
Guide Cone BallReplacement Balls for Cat 0,1,2 & 3 Hardened Yellow Zinc Plated.
Hitch BallsConversion BushesFor Reducing the Pin Hole of Lift Arms or Top Links to Accommodate a Smaller Category Pin. Yellow Zinc Dichromate Plated.
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com14
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 15
This Levelling Box Assembly fits Massey Ferguson100 Series: 133, 135, 135 Petrol, 140, 152, 165200 Series: 240300 Series: 340500 Series: 550
Levelling Box Assembly
This levelling Box Assembly FitsMassey Ferguson200 Series: 265, 275, 285, 290, 298300 Series: 350, 362, 365, 372, 375, 382, 390, 398, 399500 Series: 575, 590600 Series: 675, 690, 698, 699
Levelling Box Assembly
This Levelling Box Assembly fitsFord New Holland, Fordson, Massey Ferguson
Levelling Box Yoke Assembly
This Levelling Box Assembly fits Ursus C -330
Levelling Box Yoke Assembly
This Levelling Box Assembly fits Ursus C -360
Levelling Box Yoke Assembly
This Leveling Box Assembly fits Ford New Holland10 Series : 44101000 Series : 3000, 3055, 4000, 4100, 420030 Series : 433040 Series : 4340
Levelling Box Assembly
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com16
This Leveling Box Assembly fits Ford New Holland10 Series : 5610, 7610, 7710100 Series : 5600, 5700, 6600, 6700, 7600, 77001000 Series : 5000, 5100, 5200, 6000, 7000, 7100, 7200
Levelling Box Assembly
This Leveling Box Assembly fitsFord New Holland, Fordson, Major, Power Major, Super Major
Levelling Box Assembly
This Leveling Box Assembly fits Massey Ferguson: 165
Levelling Box Assembly
This Levelling Box Assembly LH fitsMassey Ferguson: 35, 35X
Levelling Box Yoke AssemblyLIFT ARM LEVELING ASSEMBLY
lift arm leveling assembly replaces Ford NCA577A. Each assembly is 18-1/2" closed, 25" open and has 7/8" UNF threading. Available in black & blue.
This Levelling Box Assembly Fits David Brown Tractor
Levelling Box Assembly
Stabilizer Chain Assemblies (M.F.)
Universal Stabilizer Chain Assly. (UTB)
AutoEngineers
Stablizer Chain Ford
STABILIZER CHAINSPair of universal stabilizer chains work with our stabilizer kit and are for most category 1 applications. Yellow zinc plated.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 17
AutoEngineers
3 POINT LINKAGE KIT
This kit will convert most 2 point link tractors upto 25hp into 3 point linkage tractor. These kits are manufactured from high grade steel.
Description
Top Link Assembly
Adjustable Levelling arm
Levelling Assembly
Lower Link Arm
Adjustable Stabilizer
Lower Link Arm
Kubota Type
Iseki Type
No.
1
2
2
3
4
5
6
min. 330-max. 490
M22x2.5 LH
44
Ø19
M22x2.5 RH
265Ø15.5 Ø15.5
M16x2
4222
140
300Ø15.5
Ø21
Ø22
Ø8.5 Ø8.5
475
15
M16 x 2
M16
x1.5
Ø23
50
26194
45
500
35
Ø22.1Ø16.5Ø14.5
Ø22.1
35
Ø13 40
Ø16
8 18
8
Ø20 40
Ø16
8
28 8
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com18
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 19
REAR LINKAGE QUICK HITCH (A-FRAME)
REAR LINKAGE QUICK HITCH (COUNTER-FRAME)
TOP LINK ASSEMBLY
URSUS TRACTOR PARTS
LEVELING BOX ASSEMBLY STABILIZER CHAINS FOR URSUS
FOR URSUS C-330 FOR URSUS C-360
FOR URSUS C-385
FOR URSUSC-330
FOR URSUSC-360
FOR URSUS C-330
FOR URSUS C-360
LOWER LINK (URSUS)
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com20
AutoEngineers
UNIVERSALSTABILIZER ARMRight or left universal stabilizer arm; 7/8" pin holes on 31-9/6" centers; fits stabilizer Kit
UNIVERSALSTABILIZER ARMRight or left universal stabilizer arm; replaces Massey Ferguson ST 96362358; 7/8 pin holes on 33-1/8" centers
To increase the stability of the tractor lift arms it is designed.These stabilizer kits reduce side sway of the 3-point hitch when adjusted.
STAY STRAP
Our upper and lower stay straps are designed for category 1 tractors and used to maintain an implement on a 3-point hitch at a set height. Fits all Ferguson models, Ford 2N, 8N, 9N, NAA, 600, 700, 800, 900, Oliver 550 and all Oliver 3-point conversion, Massey-Ferguson 35 and 50 models.
ADJUSTABLESTABILIZER ARM
Heavy Duty adjustable forged stabilizer arm; fits all ferguson models, Ford 2N, 8N, 9N, NAA, 600, Massey-Ferguson 35, 50, 175, 165, 180; adjustable from 28-1/2" to 36", 7/8" pin holes; 7/8" NF threads; yellow zinc plated
Our right or left universal stabilizer bracket fits a variety of stabilizer kits and category 1 tractors.
UNIVERSALSTABILIZER ARM STABILIZER BRACKET
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 21
AutoEngineers
DRILL DRAG CHAIN
Grain drill chains help cover seeds planted in furrows with out back tracking over the seeds that were just planted. Drill drag chains are precision engineered to fit standard seed drills.
Ratchet JacksRatchet jack are mechanical device used for moving, lifting and bracing loads of all kinds. Our range of ratchet jacks provide major advantages of high lifting capacity, low toe height and light weight. These jacks are available with standards accessories including clevis pins, clips and handle with powder coated finish. Designed to reduce work hazards, our range of ratchet jacks strictly comply with industrial safety standards.
Shaft Locking CollarsShaft collars are used as mechanical stops, locating components & bearing faces. It is very easy to install. Yellow zinc dichromate plated.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com22
ADAPTER BUSHINGSAdapter bushings for CAT 1 & CAT 2 quick hitches.Yellow zinc dichromate.
LINKAGE PINS
Top Link Pins
Available in a Variety of Sizes from Cat 0 to Cat 3.Yellow Zinc Dichromate Plated.
Dual Category Pins
AutoEngineers
Forged Lift Arm PinAvailable in a Variety of Sizes from Cat 0 to Cat 3.Yellow Zinc Dichromate Plated.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 23
Adjustable Lift Arm PinsAvailable in a Variety of Sizes in Cat 1 and Cat 2 with Adjustable Usable Length.Yellow Zinc Dichromate Plated.
AutoEngineers
Stabilizer PinsStabilizer Pins for a Variety of Tractors and Stabilizer Kits. Available with or without the Nut and Spring Washer.Yellow Zinc Dichromate Plated.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com24
T Handle Clevis PinsFor Use with straight & twisted clevises. Made from high tensile steel and heat treated to grade 5 specification. Drop forged one piece. Clip pin is included. Yellow zinc dichromate plated.
Safety Lock Hitch PinsMedium carbon steel forged Hitch pins with Spring Steel wire lock handle to hold pin in place. Yellow zinc dichromate plated.
Hydraulic Cylinder PinsPins in Various Lengths for Hydraulic Cylinders and Jacks.Clip Pins Included.Yellow Zinc Dichromate Plated
AutoEngineers
Bent Hitch PinsFor Use with Farm & Lawn Tractors.Also Used on Snow Plows & Other Industrial Applications.Clip Pin is Included.Yellow Zinc Dichromate Plated.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 25
Hitch Pins Swivel HandleMedium Carbon Steel Forged Hitch Pins with a Swivel Handle. Available with Clip Pin or Lynch Pin.Yellow Zinc Dichromate Plated.
Hitch Pins Swivel Handle With ChainMedium Carbon Steel Forged Hitch Pins with a Swivel Handle. Available with Clip Pin or Lynch Pin.Yellow Zinc Dichromate Plated.
Red / Blue Hitch PinMade from High tensile steel and heat treated to GRADE5/ GRADE 8 specification. Superior black powder coated finish on pin and red/blue vinyl coating on head & handle. Clip pin is included.
AutoEngineers
Drop Forged Grade 5 Hitch PinsOne Piece, drop forged, grade 5 performance hitch pins are made from high strength steel and heat treated. Zinc plated hair pins included. Yellow zinc dichromate plated.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com26
SWIVEL TOGGLE LOCK HITCH PINAvailable in ring & capsule handle.As per customer requirement.
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 27
AutoEngineers
RING DETENT PIN Our Ring Detent pin allow for fast and easy insertion and removal of pin. Replaces pins that require a cotter pin style. Available in 3/16", 5/16", 7/16", 1/4", 3/8" & 1/2" diameter. Zinc plated carbon steel.
HEAD TYPE
ROLL PIN TYPE
HEAD TYPE FOR CAT. 2 & 3
CLEVIS TYPE DRAW PINSThese draw pins are used with yoke type mountings.
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com28
General Purpose ClevisesMedium carbon steel drop forged and stress relieved. Clevis body black powder coated and pin yellow zinc dichromate plated.
Straight ClevisesMedium carbon steel drop forged and stress relieved. Clevis body black powder coated and pin yellow zinc dichromate plated.
Twisted ClevisesMedium carbon steel drop forged and stress relieved. Clevis body black powder coated and pin yellow zinc dichromate plated.
Farm ClevisesMedium carbon steel Drop Forged and Stress Relieved. Screw pin construction for multiple hitches & crawlertTractors. Clevis body black powder coated and screw pin yellow zinc dichromate plated..
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 29
Tine BushesPrecision Machined also available in self finish.
Check Chain Clevis Eye BoltThis Eye Bolt Fastens To Lift Arm Replaces Ford NCB660A;Fits Ferguson 20 & 30 With 9/16" Hex Nut
Check Chain ClevisThis clevis fastens to tractor replaces Ford 9N582;FITS MF 20,30 ,35,40,50
HAY HOOKRed hay hook has a metal handle. Available in 11" & 17'’.
HAY HOOKOur leather handle hay hook protects hands. Available in 11" & 17"
Short Increaser/Grooved SleevePrecision Machined 1-1/8 x 6 to 1-3/8 x 6 Short Increaser. Supplied with Roll Pin. Yellow Zinc Dichromate Plated.
Over Running ClutchPrecision Machined Over Running Clutch to Overcome Damage from Situations of Higher Inertia Speed of PTO Driven Implement Over the Tractor PTO Speed Upto Max. 1000 RPM Operational Use.Yellow Zinc Dichromate Plated.
Reduction with Slot & Without Slot
AutoEngineers
Sleeve IncreasersPrecision Machined 1-1/8 x 6 to 1-3/8 x 6 Sleeve Increasers. Yellow Zinc Dichromate Plated
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com30
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 31
PTO SPLINE ADAPTER Precision machined & designed to connect implement to a tractor pto shaft.It allows power to transferred from tractor to the implement. Yellow zinc dichromate plated
PTO YOKE PINYoke pin assembly; fits most PTO yokes Yellow zinc dichromate plated
Increase/reduce diameter or extend length of tractors PTO shaft to fit implements PTO shaft. Yellow zinc plated.
Quick Release PTO Adapter Extender
PTO Adaptor For KUBOTA/ MITSUBISHI/ ISEKI TRACTOR
Precision machined & designed to connect implement to a tractor pto shaft.It allows power to transferred from tractor to the implement. Yellow zinc dichromate plated
*Special Packaging : We Provide these goods with Barcode Labels / Single / Two Piece Pack / Bulk Case Packaging / Barcode Flag Labels / Assortments.
Lynch Pins
Our lynch pins have over the center ring loop design that can be attached to the head snaps down hard to hold the fastener in place. Resistant to corrosion, these pins are made from zinc plated carbon steel and yellow chromate dipped. We also specialize in manufacturing heavy lynch rings for extreme applications.
PTO Locking Pins Round
Our range of PTO lock pins can be used for farm and lawn tractors. These pins have forged body and made up of spring steel wire loop. The automatic locking system ensures highest level safety and convenience during assembly. Yellow zinc dichromate plating ensures durability and long life. We can offer PTO lock pins in different specifications based upon the requirements of the clients.
GENERAL HARDWARE ITEMS
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com32
*Special Packaging : We Provide these goods with Barcode Labels / Single / Two Piece Pack / Bulk Case Packaging / Barcode Flag Labels / Assortments.
PTO Locking Pins SqaureFor Use with Farm & Lawn Tractors and Other Industrial Applications.Forged Body with Spring Steel Wire Loop.Yellow Zinc Dichromate Plated.
Hair Pins / R ClipsWe offer high quality R clips that are available in both single and double coil versions. These clips are made from spring steel wire that makes it resistant to corrosion. The surface plating of yellow zinc dichromate ensures durability and long life even under most challenging conditions. Our range of R-clips are available in different dimensional and material specifications at the most competitive prices.
Double R ClipsFor Various Applications. Made From Spring Steel Wire and Stress Relieved for Longer Life.Yellow Zinc Dichromate Plated.
Lynch Pins with Spring LockForged Body with Spring Steel Snap Rings for Various Farm and Other Applications. Yellow Zinc Dichromate Plated.
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 33
Cotter PinsFor Use with Farm & Lawn Tractors and Other Industrial Applications. Forged Body with Spring Steel Wire Loop. Yellow Zinc Dichromate Plated. Available in assortments & polybag packaging
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com34
Slotted Spring PinSpring Pins are offered in a wide variety of sizes. Available in assortments & polybag packaging.
Straighto
30 Elbowo
45 Elbowo
65 Elbowo
90 Elbow ThreadForming
StraightLong
GREASE FITTINGSGrease Fittings are offered in a wide variety of sizes and angles. Available in assortments & polybag packaging.
WOODRUFF KEYWoodruff keys lock pulleys & gears tightly & securely. These woodruff keys are semicircular keys that are commonly used for mechanical applications in automobile or machine tool fields. It fits in a half-moon shape slot, in a shaft, leaving the flat side of the tab exposed. A second bar that slides over the shaft has a slot in it to accommodate for the key. Available in assortments & polybag packaging
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 34
E-RING CLIPSE-Rings are offered in a variety of sizes ranging from 1/16" to 3/4". Available in assortments & polybag packaging
RETAINING RINGSR e t a i n i n g R i n g s o f f e r e d i n a v a r i e t y o f s i z e s r a n g i n g f r o m 1 " t o 1 / 4 " . Av a i l a b l e
i n a s s o r t m e n t s & p o l y b a g p a c k a g i n g
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com36
SQUARE MACHINERY KEYSquare key stocks are offered in a wide variety of sizes. Available in assortments & polybag packaging
Machine bushings are offered in a wide variety of sizes. Available in all types of gauges as per customer requirement. Available in assortments & polybag packaging
18 Gauge thickness (.048", 1.2mm)14 Gauge thickness (.075", 1.9mm)10 Gauge thickness (.134", 3.4mm)
MACHINERY BUSHINGS (NARROW/ WIDE)
GAUGE THICKNESS
HEX CUP POINT SOCKET SET SCREW Hex cup point socket set screw are offered in a wide variety of sizes. Available in assortments & polybag packaging
A
B
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 37
SQUARE HEAD SET SCREW
Square head set screw are offered in a wide variety of sizes. Available in assortments & polybag packaging
O RINGSAn o-ring also known as a packing, is a mechanical gasket torus in shape. It is designed to be seated in groove & compressed during assembly between two or more parts, creating a seal at the interface.
Made in Buna-n 70 Durometer material grade. Available in assortments & polybag packaging
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com38
ADJUSTABLE CLEVIS PINS
Adjustable clevis pins are offered in a wide variety of sizes ranging between 3/16" x 2" up to 1/2" x 2".
Available in assortments & polybag packaging
HAIR PINS OR R PINSHairpin Cotter Pins are offered in a wide variety of sizes ranging between: 3/16"x1/4" to 3/4"x1".
Available in assortments & polybag packaging
Cylinder Stroke Control Segments Is Use To Limit Hydraulic/ Air Cylinder Travel. Made Up Of Die Cast Aluminum With Finger Control Tabs For Easy Installation And Removal.Available In Clamshell Packaging
CYLINDER STROKE CONTROL SEGMENTS
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 39
Exhaust/ Muffler Clamp Exhaust Weather CapAutomatically Stops Moisture when Engine is Not in Use.Balanced for Opening with Slight Pressure.Easy One Bolt Installation.Each Cap Marked for Size.Powder Coated Gray & Black.
Muffler Clamp Replaces Ford 9N5251; fits Ford 2N, 8N, 9N, MF 20, 30, 40 and 50 Designed To Fit Tractor Bonnets For All Universal Tractors.
BONNET CLAMP WITH KIT
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com40
DRAG HARROW CHAINUse behind ATV, lawn tractor, pickup, tractor or behind farm implements for one pass coverage. It is easy to use & handle & gives perfect results.
A
B
Tine Action Tine diameter is 1/2"
Direction of Pull= Passive= Aggresive
FORGED HARROW TOOTH CASTING HARROW TOOTH POST DRIVEROur post drivers are simple in design but effective in action. It is made of heavy gauge steel. It reduces effort in driving steel post in to the ground. Easy to grip handles
AutoEngineers
Disc BladeA disc harrow is a farm implement that is used to till the soil where crops are to be planted. It is also used to chop up unwanted weeds or crop remainders. It consists of many carbon steel and sometimes the longer lasting boron discs, which have many varying concavities and disc blade sizes and spacing (the choices of the later being determined by the final result required in a given soil type) and which are arranged into two sections ("offset disc harrow") or four sections ("tandem disc harrow").
C
T
VIEW- A:A
o45
o35
M
N
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 41
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com42
Tie rods are attached on both ends of the steering rack and as the pinion rolls over the slotted rack, they help push and pull the front tires as the steering wheel is turned. Tie rods offer an important function to a vehicle's steering and therefore a tractor's overall safety.
Tie Rod Ends
The drag link connects the pitman arm to the steering arm, or in some applications it connects to the tie rod assembly. Our drag links have replaceable or rebuild able ends.
Drag Link
Agriculture Machine Rack / LeversSoil Drill
QUICK REPAIR BUSHING
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 43
Battery terminals are the electrical contacts used to connect a load or charger to a single cell or multiple-cell battery. Available in variety of designs & sizes.
Steering Wheel Spinnerssteering wheel spinners fit most tractors and trucks with aluminum vinyl coated cap. Available colors include black, blue, green, yellow, red and polished aluminum. Available In Clamshell Packaging
Battery Terminals
Steering Wheel Spinners In Plastic
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com44
Hex Head Bolts
FASTENERS
We supply a comprehensive range of Hex Head Bolts or Hexagon Cap Head Screws. All these items are manufactured as per international standards or customers' specifications. Our Bolts & Screws are widely demanded in various industries due to their reliability and durability.
Specifications:-
Range : M6 to M64
Length: Up to 450 mm
Finish : Black Oxide, Zinc Plating, Hot Dip Galvanized
Grade : 4.6, 4.8, 5.6, 5.8, 8.8, 10.9, 12.9, B7, B7M
Standards:-
IS 1363 / 1364 / 2585 / 3138 / 3640 / 10238
DIN 931 / 933 / 960 / 961 / 7990 / 610
BS 1083 / 1768
ANSI B18.2.1
ASTM A307
IS 3757 / 6639
DIN 6914 / 6915
ISO 7412
ASTM A325M / A490M
BS 1769
NutsWe manufacture wide range of Industrial nuts using superior quality raw material. Our industrial nuts range includes hex thin nuts, hex nuts, hexagon castle nuts, hexagon domed cap nuts, hexagon flange nuts & high strength structural nuts. Owing to features like dimensionally accurate and last for a long period, our range is widely appreciated by our clients. Besides, our product range is available in various diameters. Moreover, we have the ability of customizing our products & supply at market leading price.
Specifications:-
Range : M5 to M56
Grade : 4, 6, 8, 10, 12, 2 H, 2 HM
Finish : Black Oxide, Zinc Plating, Hot Dip Galvanized
DIN Standards:-
DIN 439 : DIN EN ISO 4035, DIN EN ISO 4036, DIN EN ISO 8675
DIN 439-B
DIN 934 : DIN EN ISO 4032, DIN EN ISO 8673
DIN 935 / 935-1 / 935-2 / 935-3
DIN 936 :
DIN 982 : DIN EN ISO 7040, DIN EN ISO 10512
DIN 985 : DIN EN ISO 10511
DIN 1587
DIN 6915 (ISO 4714)
DIN 6923 (ISO 1661)
AutoEngineers
Studs
FASTENERS
We offer Mild Steel & High Tensile Studs, Double Ended Studs as per standard & specific requirements of customers.
Specifications:-
Range : M8 to M72 ; 5/16 to 3� in Imperial Sizes
Grade : 8.8 / 8, B7/2H, B7M/2HM
Finish : Auto Black, Hot Dip Galvanized
DIN Standards:-
DIN 976-1
DIN 976-2
Threaded RodWe are manufacturer of Threaded Bars, High Tensile Threaded Bars, Stainless Steel Threaded Rod, Steel Threaded Rod, Acme Threaded Rod, Threaded Rod Ends, Threaded Rod End, Threaded Rod End Bearings, High Strength Threaded Rod, Threaded Rod Coupling, Grade 8 Threaded Rod
Beside the comprehensive range of standard fasteners catering to the needs of multiple industries around the globe, We are also capable of delivering customized fastening solutions based on customer requirements. We has supplied vast range of Special Bolts/Screws, Metal Stampings and CNC Turned Components which are solely based on Customer Drawings.
FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating., Powder & many more as per Customer Requirements.
Range / Dia
Length
Drawings / Specifications
upto 4" (100 mm)
upto 120" (3000 mm)
We can manufacture any type of typical Fasteners as per your drawing andspecifications
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 45
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com46
Washers
FASTENERS
We are manufacturer of Washers, Spring Lock Washers, Flat / Plain Washers, Cup Washers.
We can manufacture any type of typical Fasteners as per your drawing andspecifications
Plain Washers (Steel)
Steel Heavy Washers
Hardened & Tempered
Drawings / Specifications
M6 to 64mm (1/4" to 2.5")
M6 to 64mm (1/4" to 2.5")
M6 to 64mm (1/4" to 2.5")
FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating, Powder & many more as per Customer Requirements.
Spring Washers
Spring washers are made out of spring steel and are hardened to HV 430 to 530 and are used along with almost every externally threaded fastener.
Flat (Rectangular) and Square sections are the generally used types of spring washers. Square section spring washers are used for use with fasteners with cylindrical heads and Flat section spring washers are used for all other types of heads. Spring washers of square section are lighter, and thereby, cheaper than the ones with a rectangular section.
These washers available in Black finish, zinc coated Nickle Plated, Bright Chromium plated and Phosphated finish.
Size Range
Flat (Rectangular) Section
•3 to 52 in MM series generally conforming to IS 3063-1994 and DIN 127
•1/8” to 2” in inch series generally conforming to BS 1802-1951
Square Section
3 to 52 in MM series generally conforming to IS 6735-1994 din 7980
•1/8” to 2” in inch series generally conforming to BS 1802-1951
AutoEngineers
SOCKET HEAD PRODUCTS
Item
Socket Head Cap Screw
Socket Low Head Cap Screw
Socket Head Shoulder Screw
Countersunk Socket Head Screw
Button Head Socket Screw
Flange Button Head Socket Screw
Knurled Point Socket Set Screw
Flat Point Socket Set Screw
Dog Point Socket Set Screw
Cone Point Socket Set Screw
Plain Point Socket Set Screw
Taper Pressure Plug
Type Thread size
M1.6 to M64
M4 to M20
M6 to M24
M3 to M20
M3 to M12
M3 to M10
M3 to M20
M6 to M12
M3 to M20
M3 to M12
M3 to M20
M8 to M22
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 47
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com48
RING SPANNERS
SINGLE OPEN END SPANNERDOUBLE OPEN END SPANNER COMBINATION SPANNER
AutoEngineers
AutoEngineers
HAND TOOLS
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 49
HAND TOOLS
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com50
HAND TOOLS
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com 51
PLASTIC OIL BOTTLE
LUBRICATION EQUIPMENTS
AutoEngineers
Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : info@autoengineersindia.com Website : www.autoengineersindia.com52
NOTES
top related