auto index engineersmassey ferguson 200 series: 265, 275, 285, 290, 298 300 series: 350, 362, 365,...

STANDARD TOP LINK ASSEMBLY

METRIC TOP LINK ASSEMBLIES

SPECIAL M/F TOP LINK ASSEMBLIES

MF TOP LINK ASSEMBLY

TOP LINK ASSEMBLY ZETOR/ URSUS

TOP LINK ASSEMBLY (DEUTZ)

TOP LINK ASSEMBLY MTZ-UMZ

TOP LINK ASSEMBLY MTZ-UMZ

TOP LINK ASSEMBLY FORD

TOP LINK ASSEMBLY JOHN DEERE

TOP LINK ASSEMBLY HEAVY DUTY

FORGED TOP LINK REPLACEMENT ENDS

TOP LINK END (UNC)

LOCKING COLLARS

CENTER TUBES

DRAWBARS

SWINGING DRAWBAR ASSEMBLY

SWINGING DRAWBAR WITH CLEVIS

SWINGING DRAWBAR

LIFT ARM ASSEMBLY

LOWER LINK LIFT ARM (CAT. 1)

LOWER LINK LIFT ARM (CAT. 1/1)


LOWER LINK LIFT ARM (CAT 1) , LH/RH


LOWER LINK LIFT ARM, RH (CAT. 2/2)

WELD ON END

WELD ON END BEND TYPE (URSUS)

LOWER LINK BALL END FLAT TYPE

PRODUCT NAME PAGE NO. PRODUCT NAME PAGE NO.

01

02

02

03

03

03

03

04

04

04

04

05

05

05

06

06

07

07

07

08

08

08

08

08

09

09

10

11

11

AutoEngineers INDEX

BALL JOINT WITH SLOT

WELD ON END WITH BASE

TOP LINK BALL END WITH CENTERING PIN

TOP LINK WELD ON BALL ENDS

LIFT ARM BALL SOCKETS

REPLACEMENT BALL

TOP LINK REPLACEMENT BALL

BALL WITH CUT

DUAL CATEGORY BALL

GUIDE CONE BALL

HITCH BALLS

CONVERSION BUSHES

LEVELLING BOX ASSEMBLY

LEVELLING BOX YOKE ASSEMBLY

STABLIZER CHAIN FORD

STABILIZER CHAIN ASSEMBLIES (M.F.)

UNIVERSAL STABILIZER CHAIN ASSLY. (UTB)

STABILIZER CHAINS

3 POINT LINKAGE KIT

REAR LINKAGE QUICK HITCH (A-FRAME)

REAR LINKAGE QUICK HITCH (COUNTER-FRAME)

URSUS TRACTOR PARTS

UNIVERSAL STABILIZER ARM

STABILIZER BRACKET

STAY STRAP

ADJUSTABLE STABILIZER ARM

RATCHET JACKS

DRILL DRAG CHAIN

SHAFT LOCKING COLLARS

11

12

12

12

12

13

13

13

14

14

14

14

15

15

17

17

17

17

18

19

19

20

21

21

21

21

22

22

22

ADAPTER BUSHINGS

TOP LINK PINS

FORGED LIFT ARM PIN

DUAL CATEGORY PINS

STABILIZER PINS

ADJUSTABLE LIFT ARM PINS

T HANDLE CLEVIS PINS

SAFETY LOCK HITCH PINS

HYDRAULIC CYLINDER PINS

BENT HITCH PINS

HITCH PINS SWIVEL HANDLE

HITCH PINS SWIVEL HANDLE WITH CHAIN

DROP FORGED GRADE 5 HITCH PINS

RED / BLUE HITCH PIN

SWIVEL TOGGLE LOCK HITCH PIN

RING DETENT PIN

CLEVIS TYPE DRAW PINS

GENERAL PURPOSE CLEVISES

STRAIGHT CLEVISES

TWISTED CLEVISES

FARM CLEVISES

CHECK CHAIN CLEVIS EYE BOLT

CHECK CHAIN CLEVIS

TINE BUSHES

SLEEVE INCREASERS

REDUCTION WITH SLOT & WITHOUT SLOT

OVER RUNNING CLUTCH

SHORT INCREASER/GROOVED SLEEVE

PTO SPLINE ADAPTER

QUICK RELEASE PTO ADAPTER EXTENDER


22

23

23

24

24

24

24

25

25

25

25

26

26

26

27

27

28

28

28

28

29

29

29

29

30

30

30

30

31

31

AutoEngineers INDEX

PTO Adaptor For KUBOTA/ MITSUBISHI/ ISEKI TRACTOR

PTO YOKE PIN

LYNCH PINS

PTO LOCKING PINS ROUND

PTO LOCKING PINS SQAURE

HAIR PINS / R CLIPS

DOUBLE R CLIPS

LYNCH PINS WITH SPRING LOCK

COTTER PINS

SLOTTED SPRING PIN

GREASE FITTINGS

E-RING CLIPS

RETAINING RINGS

WOODRUFF KEY

SQUARE MACHINERY KEY

MACHINERY BUSHINGS (NARROW/ WIDE)

HEX CUP POINT SOCKET SET SCREW

SQUARE HEAD SET SCREW

O RINGS

ADJUSTABLE CLEVIS PINS

HAIR PINS OR R PINS

CYLINDER STROKE CONTROL SEGMENTS

EXHAUST/ MUFFLER CLAMP

EXHAUST WEATHER CAP

MUFFLER CLAMP

BONNET CLAMP WITH KIT

DRAG HARROW CHAIN

FORGED HARROW TOOTH

31

31

32

32

33

33

33

33

34

34

34

35

35

35

36

36

36

37

37

38

38

38

39

39

39

39

40

40

CASTING HARROW TOOTH

POST DRIVER

DISC BLADE

TIE ROD ENDS

DRAG LINK

SOIL DRILL

AGRICULTURE MACHINE RACK / LEVERS

QUICK REPAIR BUSHING

Battery Terminals

Steering Wheel Spinners

Steering Wheel Spinners In Plastic

FASTENERS:

HEX BOLT

NUTS

STUDS

THREADED ROD

WASHERS

SPRING WASHERS

SOCCKET HEAD PRODUCTS

HAND TOOLS:

SPANNERS

WHEEL SPANNER

L TYPE SPANNER

PIPE WRENCH

ADJUSTABLE WRENCH

PLIERS

HAMMERS

HEX ALLEN KEY


40

40

41

42

42

42

42

42

43

43

43

44

44

45

45

46

46

47

48

49

49

49

49

49

50

50

AutoEngineers INDEX

SCREW DRIVER

LUBRICATION EQUIPMENTS

OIL CAN

PLASTIC OIL BOTTLE

GREASE GUN- PUSH TYPE

GREASE GUN- PISTOL TYPE

GREASE GUN- LEVER TYPE

50

51

51

51

51

51

Standard Top Link Assembly Standard Duty Top Links in Cat 0,1, 1&2 Combination, 2&3 Sizes. Yellow Zinc Dichromate Plated Centre Tube and Clear Zinc Plated Repair Ends Unless Otherwise Specified.

Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : [email protected] Website : www.autoengineersindia.com 01

AutoEngineers

AutoEngineers

Phone : +91-161-5045090 Mobile : +91-93566-09944, +91-98558-56443 E-mail : [email protected] Website : www.autoengineersindia.com02

Metric Top Link AssembliesStandard Duty Top Links in Cat 0,1, 1&2 Combination, 2&3 Sizes. Yellow Zinc Dichromate Plated Centre Tube and Clear Zinc Plated Repair Ends Unless Otherwise Specified.

TOP LINK ASSEMBLY HEAVY DUTYStandard Duty Top Links in Cat 1, 1&2 Combination, 2&3 Sizes. Yellow Zinc Dichromate Plated/ Powder Coated Centre Tube and Clear Zinc Plated Repair Ends Unless Otherwise Specified.

AutoEngineers


Special Top Link Assemblies :MF Top Link AssemblyTop Link Assembly Zetor/ Ursus

Top Link Assembly (DEUTZ) Top Link Assembly Mtz-umz

AutoEngineers


Top Link Assembly MTZ-UMZ

Top Link Assembly John Deere

Top Link Assembly Heavy DutyJD 6000 Series- Cast Pipe

Top Link Assembly Ford

Forged Top Link Replacement EndsForged Top Link Replacement Ends for Cat 0,1,2 & 3 Top Links. Yellow Zinc Plated.

Our Top Link Ends are made from highest grade of metals & alloys. Ends are tested in labs on different parameters like dimensional accuracy, tensile strength, resistance property etc. All are available in METRIC & UNC Threads as per customer drawing or sample.

AutoEngineers


TOP LINK END (UNC) Locking Collars

Locking Collars are used for locking centre tube of Top Link Assembly.

Available in all kinds of Thread size.

Color Yellow Zinc Plated.

Drawbars

We offer high quality draw bars for safe and comfortable towing. Our range of drawbars are made from highest grade of metal and alloys that ensures a long life performance. We specializes in manufacturing both cross type as well as swinging draw bars in diverse specifications.

AutoEngineers


Center TubesCenter Tubes for all kinds of Top Link Assembly & Stabilizer Chains.

* Note : Available in yellow zinc plated & colored powder coated as per requirement. Thread size as per drawing or sample. Available in all sizes as per customer requirements

AutoEngineers


This Lower Link Lift Arm (Cat. 1)fitsFord new holland, Fordson, Dexta, super dexta

Massey Ferguson100 Series: 133, 135, 135 Petrol, 140, 148, 152

Lower Link Lift Arm (Cat. 1)

This Lower Link Lift Arm (Cat. 2)fitsMassey Ferguson100 Series: 133, 135, 135 Petrol, 148, 152200 Series: 230, 235, 240, 245, 250300 Series: 340 500 Series: 550


This Lower Link Lift Arm (Cat. 1)fitsMassey Ferguson : 35, 35 Petrol

Lower Link Lift Arm (Cat. 1/1)

This Lower Link Lift Arm (Cat. 1)fitsFord New Holland10 Series : 2610, 2810, 2910, 3610, 3910, 4110, 4610100 Series : 2600, 3600, 46001000 Series : 2000, 2100, 2110, 2120, 2150, 2310, 3000, 3100, 3120, 3310,

3330, 4000, 4140

Lower Link Lift Arm (Cat 1) , LH/RH

Lift Arm Assembly

Our category 1 right or left hand forged lift arm contains 7/8" pin holes, 31-3/4" overall length and comes in red. Lift arms fit all Ferguson models, Ford 2N, 8N, 9N, NAA, Massey-Ferguson 35, 50, Oliver 550 and Oliver 3-point conversion and John Deere 1010.

Lift Arm Assembly

Our category 1 right or left hand forged lift arm contains 7/8" pin holes, center to center 800 mm length. Lift arms fit Ford New Holland: 10 Series, 100 series, 1000 series

AutoEngineers


This Lower Link Lift Arm (Cat. 2)fitsFord New HollandFordson, Major, Power Major

Lower Link Lift Arm (Cat. 2)This Lower Link Lift Arm (Cat. 2)fitsMassey Ferguson: 165


This Lower Link Lift Arm (Cat. 1)fitsMassey Ferguson200 Series: 265, 275, 285, 290, 298300 Series: 362, 365, 372, 375, 382, 390, 398, 399500 Series: 575, 590600 Series: 675, 690, 698, 699

Lower Link Lift Arm, RH (Cat. 2/2)

This Lower Link Lift Arm (Cat. 1)fitsMassey Ferguson200 Series: 265, 275, 285, 290, 298300 Series: 362, 365, 372, 375, 382, 390, 398, 399500 Series: 575, 590600 Series: 675, 690, 698, 699

Lower Link Lift Arm, LH (Cat. 2/2)


WELD ON END

WELD ON END

WELD ON END

AutoEngineers

AutoEngineers


WELD ON END

WELD ON END BEND TYPE (URSUS)

LOWER LINK BALL END FLAT TYPE

BALL JOINT WITH SLOT

AutoEngineers


Lift Arm Ball SocketsWeld-on lift arm Ball Sockets to fit cat 0 through cat 3 tractors. Yellow zinc dichromate plated or black phosphate finish.

WELD ON END WITH BASE TOP LINK BALL END WITH CENTERING PIN

Top Link Weld on Ball EndsForged Top Link Weld-on Ball Ends for Cat 1 & Cat 2 Tractors. Black Phosphate Housing and Zinc Plated Ball.

Replacement Ball

Ball with Cut

AutoEngineers

Top Link Replacement Ball


Dual Category Ball

Replacement Balls for Cat 0,1,2 & 3 Hardened Yellow Zinc Plated. Ball also available with cut.

Guide Cone BallReplacement Balls for Cat 0,1,2 & 3 Hardened Yellow Zinc Plated.

Hitch BallsConversion BushesFor Reducing the Pin Hole of Lift Arms or Top Links to Accommodate a Smaller Category Pin. Yellow Zinc Dichromate Plated.

AutoEngineers


AutoEngineers


This Levelling Box Assembly fits Massey Ferguson100 Series: 133, 135, 135 Petrol, 140, 152, 165200 Series: 240300 Series: 340500 Series: 550

Levelling Box Assembly

This levelling Box Assembly FitsMassey Ferguson200 Series: 265, 275, 285, 290, 298300 Series: 350, 362, 365, 372, 375, 382, 390, 398, 399500 Series: 575, 590600 Series: 675, 690, 698, 699


This Levelling Box Assembly fitsFord New Holland, Fordson, Massey Ferguson

Levelling Box Yoke Assembly

This Levelling Box Assembly fits Ursus C -330


This Levelling Box Assembly fits Ursus C -360


This Leveling Box Assembly fits Ford New Holland10 Series : 44101000 Series : 3000, 3055, 4000, 4100, 420030 Series : 433040 Series : 4340


AutoEngineers


This Leveling Box Assembly fits Ford New Holland10 Series : 5610, 7610, 7710100 Series : 5600, 5700, 6600, 6700, 7600, 77001000 Series : 5000, 5100, 5200, 6000, 7000, 7100, 7200


This Leveling Box Assembly fitsFord New Holland, Fordson, Major, Power Major, Super Major


This Leveling Box Assembly fits Massey Ferguson: 165


This Levelling Box Assembly LH fitsMassey Ferguson: 35, 35X

Levelling Box Yoke AssemblyLIFT ARM LEVELING ASSEMBLY

lift arm leveling assembly replaces Ford NCA577A. Each assembly is 18-1/2" closed, 25" open and has 7/8" UNF threading. Available in black & blue.

This Levelling Box Assembly Fits David Brown Tractor


Stabilizer Chain Assemblies (M.F.)

Universal Stabilizer Chain Assly. (UTB)

AutoEngineers

Stablizer Chain Ford

STABILIZER CHAINSPair of universal stabilizer chains work with our stabilizer kit and are for most category 1 applications. Yellow zinc plated.


AutoEngineers

3 POINT LINKAGE KIT

This kit will convert most 2 point link tractors upto 25hp into 3 point linkage tractor. These kits are manufactured from high grade steel.

Description

Top Link Assembly

Adjustable Levelling arm

Levelling Assembly

Lower Link Arm

Adjustable Stabilizer

Lower Link Arm

Kubota Type

Iseki Type

No.

1

2

2

3

4

5

6

min. 330-max. 490

M22x2.5 LH

44

Ø19

M22x2.5 RH

265Ø15.5 Ø15.5

M16x2

4222

140

300Ø15.5

Ø21

Ø22

Ø8.5 Ø8.5

475

15

M16 x 2

M16

x1.5

Ø23

50

26194

45

500

35

Ø22.1Ø16.5Ø14.5

Ø22.1

35

Ø13 40

Ø16

8 18

8

Ø20 40

Ø16

8

28 8


AutoEngineers


REAR LINKAGE QUICK HITCH (A-FRAME)

REAR LINKAGE QUICK HITCH (COUNTER-FRAME)

TOP LINK ASSEMBLY

URSUS TRACTOR PARTS

LEVELING BOX ASSEMBLY STABILIZER CHAINS FOR URSUS

FOR URSUS C-330 FOR URSUS C-360

FOR URSUS C-385

FOR URSUSC-330

FOR URSUSC-360

FOR URSUS C-330

FOR URSUS C-360

LOWER LINK (URSUS)

AutoEngineers


AutoEngineers

UNIVERSALSTABILIZER ARMRight or left universal stabilizer arm; 7/8" pin holes on 31-9/6" centers; fits stabilizer Kit

UNIVERSALSTABILIZER ARMRight or left universal stabilizer arm; replaces Massey Ferguson ST 96362358; 7/8 pin holes on 33-1/8" centers

To increase the stability of the tractor lift arms it is designed.These stabilizer kits reduce side sway of the 3-point hitch when adjusted.

STAY STRAP

Our upper and lower stay straps are designed for category 1 tractors and used to maintain an implement on a 3-point hitch at a set height. Fits all Ferguson models, Ford 2N, 8N, 9N, NAA, 600, 700, 800, 900, Oliver 550 and all Oliver 3-point conversion, Massey-Ferguson 35 and 50 models.

ADJUSTABLESTABILIZER ARM

Heavy Duty adjustable forged stabilizer arm; fits all ferguson models, Ford 2N, 8N, 9N, NAA, 600, Massey-Ferguson 35, 50, 175, 165, 180; adjustable from 28-1/2" to 36", 7/8" pin holes; 7/8" NF threads; yellow zinc plated

Our right or left universal stabilizer bracket fits a variety of stabilizer kits and category 1 tractors.

UNIVERSALSTABILIZER ARM STABILIZER BRACKET


AutoEngineers

DRILL DRAG CHAIN

Grain drill chains help cover seeds planted in furrows with out back tracking over the seeds that were just planted. Drill drag chains are precision engineered to fit standard seed drills.

Ratchet JacksRatchet jack are mechanical device used for moving, lifting and bracing loads of all kinds. Our range of ratchet jacks provide major advantages of high lifting capacity, low toe height and light weight. These jacks are available with standards accessories including clevis pins, clips and handle with powder coated finish. Designed to reduce work hazards, our range of ratchet jacks strictly comply with industrial safety standards.

Shaft Locking CollarsShaft collars are used as mechanical stops, locating components & bearing faces. It is very easy to install. Yellow zinc dichromate plated.


ADAPTER BUSHINGSAdapter bushings for CAT 1 & CAT 2 quick hitches.Yellow zinc dichromate.

LINKAGE PINS

Top Link Pins

Available in a Variety of Sizes from Cat 0 to Cat 3.Yellow Zinc Dichromate Plated.

Dual Category Pins

AutoEngineers

Forged Lift Arm PinAvailable in a Variety of Sizes from Cat 0 to Cat 3.Yellow Zinc Dichromate Plated.


Adjustable Lift Arm PinsAvailable in a Variety of Sizes in Cat 1 and Cat 2 with Adjustable Usable Length.Yellow Zinc Dichromate Plated.

AutoEngineers

Stabilizer PinsStabilizer Pins for a Variety of Tractors and Stabilizer Kits. Available with or without the Nut and Spring Washer.Yellow Zinc Dichromate Plated.


T Handle Clevis PinsFor Use with straight & twisted clevises. Made from high tensile steel and heat treated to grade 5 specification. Drop forged one piece. Clip pin is included. Yellow zinc dichromate plated.

Safety Lock Hitch PinsMedium carbon steel forged Hitch pins with Spring Steel wire lock handle to hold pin in place. Yellow zinc dichromate plated.

Hydraulic Cylinder PinsPins in Various Lengths for Hydraulic Cylinders and Jacks.Clip Pins Included.Yellow Zinc Dichromate Plated

AutoEngineers

Bent Hitch PinsFor Use with Farm & Lawn Tractors.Also Used on Snow Plows & Other Industrial Applications.Clip Pin is Included.Yellow Zinc Dichromate Plated.


Hitch Pins Swivel HandleMedium Carbon Steel Forged Hitch Pins with a Swivel Handle. Available with Clip Pin or Lynch Pin.Yellow Zinc Dichromate Plated.

Hitch Pins Swivel Handle With ChainMedium Carbon Steel Forged Hitch Pins with a Swivel Handle. Available with Clip Pin or Lynch Pin.Yellow Zinc Dichromate Plated.

Red / Blue Hitch PinMade from High tensile steel and heat treated to GRADE5/ GRADE 8 specification. Superior black powder coated finish on pin and red/blue vinyl coating on head & handle. Clip pin is included.

AutoEngineers

Drop Forged Grade 5 Hitch PinsOne Piece, drop forged, grade 5 performance hitch pins are made from high strength steel and heat treated. Zinc plated hair pins included. Yellow zinc dichromate plated.


SWIVEL TOGGLE LOCK HITCH PINAvailable in ring & capsule handle.As per customer requirement.


AutoEngineers

RING DETENT PIN Our Ring Detent pin allow for fast and easy insertion and removal of pin. Replaces pins that require a cotter pin style. Available in 3/16", 5/16", 7/16", 1/4", 3/8" & 1/2" diameter. Zinc plated carbon steel.

HEAD TYPE

ROLL PIN TYPE

HEAD TYPE FOR CAT. 2 & 3

CLEVIS TYPE DRAW PINSThese draw pins are used with yoke type mountings.

AutoEngineers


General Purpose ClevisesMedium carbon steel drop forged and stress relieved. Clevis body black powder coated and pin yellow zinc dichromate plated.

Straight ClevisesMedium carbon steel drop forged and stress relieved. Clevis body black powder coated and pin yellow zinc dichromate plated.

Twisted ClevisesMedium carbon steel drop forged and stress relieved. Clevis body black powder coated and pin yellow zinc dichromate plated.

Farm ClevisesMedium carbon steel Drop Forged and Stress Relieved. Screw pin construction for multiple hitches & crawlertTractors. Clevis body black powder coated and screw pin yellow zinc dichromate plated..

AutoEngineers


Tine BushesPrecision Machined also available in self finish.

Check Chain Clevis Eye BoltThis Eye Bolt Fastens To Lift Arm Replaces Ford NCB660A;Fits Ferguson 20 & 30 With 9/16" Hex Nut

Check Chain ClevisThis clevis fastens to tractor replaces Ford 9N582;FITS MF 20,30 ,35,40,50

HAY HOOKRed hay hook has a metal handle. Available in 11" & 17'’.

HAY HOOKOur leather handle hay hook protects hands. Available in 11" & 17"

Short Increaser/Grooved SleevePrecision Machined 1-1/8 x 6 to 1-3/8 x 6 Short Increaser. Supplied with Roll Pin. Yellow Zinc Dichromate Plated.

Over Running ClutchPrecision Machined Over Running Clutch to Overcome Damage from Situations of Higher Inertia Speed of PTO Driven Implement Over the Tractor PTO Speed Upto Max. 1000 RPM Operational Use.Yellow Zinc Dichromate Plated.

Reduction with Slot & Without Slot

AutoEngineers

Sleeve IncreasersPrecision Machined 1-1/8 x 6 to 1-3/8 x 6 Sleeve Increasers. Yellow Zinc Dichromate Plated


AutoEngineers


PTO SPLINE ADAPTER Precision machined & designed to connect implement to a tractor pto shaft.It allows power to transferred from tractor to the implement. Yellow zinc dichromate plated

PTO YOKE PINYoke pin assembly; fits most PTO yokes Yellow zinc dichromate plated

Increase/reduce diameter or extend length of tractors PTO shaft to fit implements PTO shaft. Yellow zinc plated.

Quick Release PTO Adapter Extender

PTO Adaptor For KUBOTA/ MITSUBISHI/ ISEKI TRACTOR

Precision machined & designed to connect implement to a tractor pto shaft.It allows power to transferred from tractor to the implement. Yellow zinc dichromate plated

*Special Packaging : We Provide these goods with Barcode Labels / Single / Two Piece Pack / Bulk Case Packaging / Barcode Flag Labels / Assortments.

Lynch Pins

Our lynch pins have over the center ring loop design that can be attached to the head snaps down hard to hold the fastener in place. Resistant to corrosion, these pins are made from zinc plated carbon steel and yellow chromate dipped. We also specialize in manufacturing heavy lynch rings for extreme applications.

PTO Locking Pins Round

Our range of PTO lock pins can be used for farm and lawn tractors. These pins have forged body and made up of spring steel wire loop. The automatic locking system ensures highest level safety and convenience during assembly. Yellow zinc dichromate plating ensures durability and long life. We can offer PTO lock pins in different specifications based upon the requirements of the clients.

GENERAL HARDWARE ITEMS

AutoEngineers


*Special Packaging : We Provide these goods with Barcode Labels / Single / Two Piece Pack / Bulk Case Packaging / Barcode Flag Labels / Assortments.

PTO Locking Pins SqaureFor Use with Farm & Lawn Tractors and Other Industrial Applications.Forged Body with Spring Steel Wire Loop.Yellow Zinc Dichromate Plated.

Hair Pins / R ClipsWe offer high quality R clips that are available in both single and double coil versions. These clips are made from spring steel wire that makes it resistant to corrosion. The surface plating of yellow zinc dichromate ensures durability and long life even under most challenging conditions. Our range of R-clips are available in different dimensional and material specifications at the most competitive prices.

Double R ClipsFor Various Applications. Made From Spring Steel Wire and Stress Relieved for Longer Life.Yellow Zinc Dichromate Plated.

Lynch Pins with Spring LockForged Body with Spring Steel Snap Rings for Various Farm and Other Applications. Yellow Zinc Dichromate Plated.

AutoEngineers


Cotter PinsFor Use with Farm & Lawn Tractors and Other Industrial Applications. Forged Body with Spring Steel Wire Loop. Yellow Zinc Dichromate Plated. Available in assortments & polybag packaging

AutoEngineers


Slotted Spring PinSpring Pins are offered in a wide variety of sizes. Available in assortments & polybag packaging.

Straighto

30 Elbowo

45 Elbowo

65 Elbowo

90 Elbow ThreadForming

StraightLong

GREASE FITTINGSGrease Fittings are offered in a wide variety of sizes and angles. Available in assortments & polybag packaging.

WOODRUFF KEYWoodruff keys lock pulleys & gears tightly & securely. These woodruff keys are semicircular keys that are commonly used for mechanical applications in automobile or machine tool fields. It fits in a half-moon shape slot, in a shaft, leaving the flat side of the tab exposed. A second bar that slides over the shaft has a slot in it to accommodate for the key. Available in assortments & polybag packaging

AutoEngineers


E-RING CLIPSE-Rings are offered in a variety of sizes ranging from 1/16" to 3/4". Available in assortments & polybag packaging

RETAINING RINGSR e t a i n i n g R i n g s o f f e r e d i n a v a r i e t y o f s i z e s r a n g i n g f r o m 1 " t o 1 / 4 " . Av a i l a b l e

i n a s s o r t m e n t s & p o l y b a g p a c k a g i n g

AutoEngineers


SQUARE MACHINERY KEYSquare key stocks are offered in a wide variety of sizes. Available in assortments & polybag packaging

Machine bushings are offered in a wide variety of sizes. Available in all types of gauges as per customer requirement. Available in assortments & polybag packaging

18 Gauge thickness (.048", 1.2mm)14 Gauge thickness (.075", 1.9mm)10 Gauge thickness (.134", 3.4mm)

MACHINERY BUSHINGS (NARROW/ WIDE)

GAUGE THICKNESS

HEX CUP POINT SOCKET SET SCREW Hex cup point socket set screw are offered in a wide variety of sizes. Available in assortments & polybag packaging

A

B

AutoEngineers


SQUARE HEAD SET SCREW

Square head set screw are offered in a wide variety of sizes. Available in assortments & polybag packaging

O RINGSAn o-ring also known as a packing, is a mechanical gasket torus in shape. It is designed to be seated in groove & compressed during assembly between two or more parts, creating a seal at the interface.

Made in Buna-n 70 Durometer material grade. Available in assortments & polybag packaging

AutoEngineers


ADJUSTABLE CLEVIS PINS

Adjustable clevis pins are offered in a wide variety of sizes ranging between 3/16" x 2" up to 1/2" x 2".

Available in assortments & polybag packaging

HAIR PINS OR R PINSHairpin Cotter Pins are offered in a wide variety of sizes ranging between: 3/16"x1/4" to 3/4"x1".

Available in assortments & polybag packaging

Cylinder Stroke Control Segments Is Use To Limit Hydraulic/ Air Cylinder Travel. Made Up Of Die Cast Aluminum With Finger Control Tabs For Easy Installation And Removal.Available In Clamshell Packaging

CYLINDER STROKE CONTROL SEGMENTS

AutoEngineers


Exhaust/ Muffler Clamp Exhaust Weather CapAutomatically Stops Moisture when Engine is Not in Use.Balanced for Opening with Slight Pressure.Easy One Bolt Installation.Each Cap Marked for Size.Powder Coated Gray & Black.

Muffler Clamp Replaces Ford 9N5251; fits Ford 2N, 8N, 9N, MF 20, 30, 40 and 50 Designed To Fit Tractor Bonnets For All Universal Tractors.

BONNET CLAMP WITH KIT

AutoEngineers


DRAG HARROW CHAINUse behind ATV, lawn tractor, pickup, tractor or behind farm implements for one pass coverage. It is easy to use & handle & gives perfect results.

A

B

Tine Action Tine diameter is 1/2"

Direction of Pull= Passive= Aggresive

FORGED HARROW TOOTH CASTING HARROW TOOTH POST DRIVEROur post drivers are simple in design but effective in action. It is made of heavy gauge steel. It reduces effort in driving steel post in to the ground. Easy to grip handles

AutoEngineers

Disc BladeA disc harrow is a farm implement that is used to till the soil where crops are to be planted. It is also used to chop up unwanted weeds or crop remainders. It consists of many carbon steel and sometimes the longer lasting boron discs, which have many varying concavities and disc blade sizes and spacing (the choices of the later being determined by the final result required in a given soil type) and which are arranged into two sections ("offset disc harrow") or four sections ("tandem disc harrow").

C

T

VIEW- A:A

o45

o35

M

N


AutoEngineers


Tie rods are attached on both ends of the steering rack and as the pinion rolls over the slotted rack, they help push and pull the front tires as the steering wheel is turned. Tie rods offer an important function to a vehicle's steering and therefore a tractor's overall safety.

Tie Rod Ends

The drag link connects the pitman arm to the steering arm, or in some applications it connects to the tie rod assembly. Our drag links have replaceable or rebuild able ends.

Drag Link

Agriculture Machine Rack / LeversSoil Drill

QUICK REPAIR BUSHING

AutoEngineers


Battery terminals are the electrical contacts used to connect a load or charger to a single cell or multiple-cell battery. Available in variety of designs & sizes.

Steering Wheel Spinnerssteering wheel spinners fit most tractors and trucks with aluminum vinyl coated cap. Available colors include black, blue, green, yellow, red and polished aluminum. Available In Clamshell Packaging

Battery Terminals

Steering Wheel Spinners In Plastic

AutoEngineers


Hex Head Bolts

FASTENERS

We supply a comprehensive range of Hex Head Bolts or Hexagon Cap Head Screws. All these items are manufactured as per international standards or customers' specifications. Our Bolts & Screws are widely demanded in various industries due to their reliability and durability.

Specifications:-

Range : M6 to M64

Length: Up to 450 mm

Finish : Black Oxide, Zinc Plating, Hot Dip Galvanized

Grade : 4.6, 4.8, 5.6, 5.8, 8.8, 10.9, 12.9, B7, B7M

Standards:-

IS 1363 / 1364 / 2585 / 3138 / 3640 / 10238

DIN 931 / 933 / 960 / 961 / 7990 / 610

BS 1083 / 1768

ANSI B18.2.1

ASTM A307

IS 3757 / 6639

DIN 6914 / 6915

ISO 7412

ASTM A325M / A490M

BS 1769

NutsWe manufacture wide range of Industrial nuts using superior quality raw material. Our industrial nuts range includes hex thin nuts, hex nuts, hexagon castle nuts, hexagon domed cap nuts, hexagon flange nuts & high strength structural nuts. Owing to features like dimensionally accurate and last for a long period, our range is widely appreciated by our clients. Besides, our product range is available in various diameters. Moreover, we have the ability of customizing our products & supply at market leading price.

Specifications:-

Range : M5 to M56

Grade : 4, 6, 8, 10, 12, 2 H, 2 HM

Finish : Black Oxide, Zinc Plating, Hot Dip Galvanized

DIN Standards:-

DIN 439 : DIN EN ISO 4035, DIN EN ISO 4036, DIN EN ISO 8675

DIN 439-B

DIN 934 : DIN EN ISO 4032, DIN EN ISO 8673

DIN 935 / 935-1 / 935-2 / 935-3

DIN 936 :

DIN 982 : DIN EN ISO 7040, DIN EN ISO 10512

DIN 985 : DIN EN ISO 10511

DIN 1587

DIN 6915 (ISO 4714)

DIN 6923 (ISO 1661)

AutoEngineers

Studs

FASTENERS

We offer Mild Steel & High Tensile Studs, Double Ended Studs as per standard & specific requirements of customers.

Specifications:-

Range : M8 to M72 ; 5/16 to 3� in Imperial Sizes

Grade : 8.8 / 8, B7/2H, B7M/2HM

Finish : Auto Black, Hot Dip Galvanized

DIN Standards:-

DIN 976-1

DIN 976-2

Threaded RodWe are manufacturer of Threaded Bars, High Tensile Threaded Bars, Stainless Steel Threaded Rod, Steel Threaded Rod, Acme Threaded Rod, Threaded Rod Ends, Threaded Rod End, Threaded Rod End Bearings, High Strength Threaded Rod, Threaded Rod Coupling, Grade 8 Threaded Rod

Beside the comprehensive range of standard fasteners catering to the needs of multiple industries around the globe, We are also capable of delivering customized fastening solutions based on customer requirements. We has supplied vast range of Special Bolts/Screws, Metal Stampings and CNC Turned Components which are solely based on Customer Drawings.

FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating., Powder & many more as per Customer Requirements.

Range / Dia

Length

Drawings / Specifications

upto 4" (100 mm)

upto 120" (3000 mm)

We can manufacture any type of typical Fasteners as per your drawing andspecifications


AutoEngineers


Washers

FASTENERS

We are manufacturer of Washers, Spring Lock Washers, Flat / Plain Washers, Cup Washers.

We can manufacture any type of typical Fasteners as per your drawing andspecifications

Plain Washers (Steel)

Steel Heavy Washers

Hardened & Tempered

Drawings / Specifications

M6 to 64mm (1/4" to 2.5")

M6 to 64mm (1/4" to 2.5")

M6 to 64mm (1/4" to 2.5")

FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating, Powder & many more as per Customer Requirements.

Spring Washers

Spring washers are made out of spring steel and are hardened to HV 430 to 530 and are used along with almost every externally threaded fastener.

Flat (Rectangular) and Square sections are the generally used types of spring washers. Square section spring washers are used for use with fasteners with cylindrical heads and Flat section spring washers are used for all other types of heads. Spring washers of square section are lighter, and thereby, cheaper than the ones with a rectangular section.

These washers available in Black finish, zinc coated Nickle Plated, Bright Chromium plated and Phosphated finish.

Size Range

Flat (Rectangular) Section

•3 to 52 in MM series generally conforming to IS 3063-1994 and DIN 127

•1/8” to 2” in inch series generally conforming to BS 1802-1951

Square Section

3 to 52 in MM series generally conforming to IS 6735-1994 din 7980

•1/8” to 2” in inch series generally conforming to BS 1802-1951

AutoEngineers

SOCKET HEAD PRODUCTS

Item

Socket Head Cap Screw

Socket Low Head Cap Screw

Socket Head Shoulder Screw

Countersunk Socket Head Screw

Button Head Socket Screw

Flange Button Head Socket Screw

Knurled Point Socket Set Screw

Flat Point Socket Set Screw

Dog Point Socket Set Screw

Cone Point Socket Set Screw

Plain Point Socket Set Screw

Taper Pressure Plug

Type Thread size

M1.6 to M64

M4 to M20

M6 to M24

M3 to M20

M3 to M12

M3 to M10

M3 to M20

M6 to M12

M3 to M20

M3 to M12

M3 to M20

M8 to M22


AutoEngineers


RING SPANNERS

SINGLE OPEN END SPANNERDOUBLE OPEN END SPANNER COMBINATION SPANNER

AutoEngineers

AutoEngineers

HAND TOOLS

AutoEngineers


HAND TOOLS

AutoEngineers


PLASTIC OIL BOTTLE

LUBRICATION EQUIPMENTS

AutoEngineers


NOTES

auto index engineersmassey ferguson 200 series: 265, 275, 285, 290, 298 300 series: 350, 362, 365,...

Documents