2011 ops-core catalog
Post on 09-Apr-2018
220 Views
Preview:
TRANSCRIPT
-
8/7/2019 2011 Ops-Core Catalog
1/21
-
8/7/2019 2011 Ops-Core Catalog
2/21
Ideas about safeguarding the soldier used to be predominantly defensive. Today, the ability to offensively respond to threats
faster than the enemy is crucial to the concept of protection.
The human brain, eyes and ears are highly evolved to sense and react instantaneously. Yet with the advent of new technologies
to enhance these senses and increase awareness, todays soldier has been burdened by an excessive amount of equipment to
carry on the head. Traditional military helmets were never intended for this purpose and therefore provide a solution that is
uncomfortable, unstable and often compromises the very senses it is trying to protect.
Helmets, gas masks, goggles, visors, mandibles, communication headsets, illuminators and identification devices are all made by
different companies that focus on the performance of their own product. Until now, the soldier was left to figure out how to make
them all work together. A synergetic system can only result from the careful consideration of all the devices and cooperation
between the various headborne equipment manufacturers.
Ops-Core offers multiple helmet solutions, upgrade components and accessories to create a platform with the sole purpose
of achieving this goal. By respecting the anatomy of the elite warrior and the complexity of the equipment, we have built a
foundation for all the elements to work in harmony and yield a solution far greater than the sum of its parts.
PROTECTING THE ELITE WARRIOR
-
8/7/2019 2011 Ops-Core Catalog
3/21
Patented Head-Loc retention systems and Occ-Dial suspension liners provide greaterhelmet comfort and stability when used in conjunction with night vision goggles
Retention systems unique strap geometry and Head-Loc tabs lock the chinstrapadjustment at any location without any loose ends
BISS-NVG lanyard/elastic tensioners provide extra stability and enhance performance ofNVGs by eliminating rattle and vibration
4-Position Accessory Rail Connectors (ARCs) are mounted to the sides of the helmet toallow for quick yet secure donning or dofng of various headborne accessories
ARCs are designed to emergency release accessories at 8 ft.lbs (11 Newton meters) oftorque to prevent neck injuries in the event of snagging
O2 Single Strap Kit easily attaches to ARCs and is compatible with Carleton Phantom &Para-Flite Phaos masks
Gunsight Mandible and Up-Armor Side Covers offer additional coverage for protection fromfragments and debris encountered during breaching and off-road vehicle exercises
The ARCs and shroud have compatibility with ballistic visors to offer full face protection
Accessory Rail Connectors (ARCs) allow for streamlined mounting of devices such as IRilluminators, lights, video cameras, IFF devices, Peltor Headsets and Vuzix HMDs
The VAS Shroud provides a front mounting option for video cameras and illuminators
Helmets are compatible with various communication devices including headband styleheadsets and ARC mounted Peltors
Night Operations
Airborne Operations
Breaching / ATV
Mission Documentation
Night VisionGoggles
O2 Mask
Front VideoCamera
BallisticMandible
SideArmor
Video Camera
Lanyard
HMD
BallisticVisor
COMMs Headset
COMMsHeadset
IR Illuminator
IFF Strobe
ARC Rail
SYSTEM LEVEL CAPABILITIES 2011 PRODUCTSHelmets
Accessories
BALLISTIC HIGH CUT CARBONBALLISTICFULLEAR
OCC-DIALLINER KITHEAD-LOC CHINSTRAPS
BASEJUMPSENTRY(LIGHTWEIGHT ACH)
GUNSIGHT MANDIBLE PELTOR COMTAC-ARCHEADSET
ACH-ARC
SKULLCRUSHER
UP-ARMOR SIDE COVERS MANTA STROBEMultiCam MESH HELMETCOVER
RAILADAPTERSVASSHROUD
4 5
-
8/7/2019 2011 Ops-Core Catalog
4/21
Ops-Cores hybrid suspension/liner design features an adjustable circumferential tband with repositionable impact pads. The tband
allows the user to precisely adjust the liner shape and size for a customized t and optimal comfort. Not only can the length, width,
and overall shape be personalized by simply turning the knob dial, the helmet depth can also be set by adjusting the vertical position
of the whole system. This provides a perfect and secure t that is able to support the weight and moment forces of a helmet in
demanding military operations.
The liner system is also compatible with a variety of communication headsets and hearing protection devices, including headband style
COMMs. The headband slides under the tband to rest in between the helmets two top impact pads eliminating pressure points and
interference that is a common problem with traditional liner systems. The impact pads are also pre-molded to the shape of the head
and are not affected by temperature, altitude or moisture.
COMFORT = FIT + STABILITY + MATERIAL DESIGN
FAST HELMET: CIRCUMFERENCE
0
20
40
60
80
100
120
140
500 510 520 530 540 550 560 570 580 590 600 610 620 630
Distribution of FAST Helmets by Head Circumference
NumberofSubjects
HeadCircumference (mm)
M/L63.8%
S/M17.5%
L/XL18.0%
FAST HELMET: LENGTH & WIDTH
130
170 180 190 200 210 220
140
150
160
170
180
FAST Ballistic 3-Size Distribution by Head Length & Width
Length(mm)
Width(mm)
FASTHelmet Size
Head Circumference (cm) 53-56 56-59
Head Circumference (in) 2 1 - 22 22 - 2 3
S/M M/L
Head Size (US) upto 7 upto 7
59-61
23- 24
L/XL
upto 7
SentryHelmet Size
Head Circumference (cm) 53-57 57-59 59-61
Head Circumference (in) 2 1 - 22 2 2 - 2 3 2 3 - 24
M L XL
Head Size (US) upto7 upto 7 upto 7
61-63
24 - 24
XXL
upto 7
FAST HELMET SIZING SENTRY (LIGHTWEIGHT ACH) SIZING
3HELMET
SIZES
4HELMET
SIZES
S/M
M/L
L/XL
M
L
XL
XXL
SizeS/M
SizeM/L
SizeL/XL
FASTSizes
SizeM
SizeL
SizeXL
SizeXXL
SentrySizes
SENTRY (ACH): CIRCUMFERENCE
0
20
40
60
80
100
120
140
500 510 520 530 540 550 560 570 580 590 600 610 620 630
Distribution of Sentry Helmets by Head Circumference
NumberofSubjects
HeadCircumference (mm)
L44.4%
M32.3%
XXL2.8%
XL20.0%
SENTRY (ACH): LENGTH & WIDTH
130
170 180 190 200 210 220
140
150
160
170
180
FAST Ballistic 4-Size Distribution by Head Length & Width
Length(mm)
Width(mm)
6
OPS-CORE USES PROPER ANTHROPOMETRICS
AND GEOMETRY TO COMFORTABLY FIT AND
STABILIZE THE HELMET ON THE HEAD
-
8/7/2019 2011 Ops-Core Catalog
5/21
New Buckle
Chinstrap Chin Cup
COMFORT = FIT + STABILITY + MATERIAL DESIGN COMFORT = FIT + STABILITY +MATERIAL DESIGNThe patented Head-Loc Retention system design has a unique strap geometry that
creates straight force lines to evenly distribute helmet loads to the head. This eliminates
pre-existing slack in the system that causes instability and slipping problems inherent to
all other conventional chinstraps.
Head-Loc tabs do away with loose strap ends and provide quick and easy one-handed
adjustment. This also keeps the design low prole, lightweight, and sn ag free.
During use, these innovative features offer a retention solution that is secure, comfortable
and adaptable to a variety of mission scenarios and environmental conditions. When
wearing night vision goggles or conducting rigorous physical activates, the helmet can be
stabilized without use of counterweights or other cumbersome devices. This facilitates a
high performance head-borne platform that stays put and does not op around in ways
that could be detrimental to the task at hand.
ACH/LWH STANDARD ISSUE CHINSTRAP
HEAD-LOC CHINSTRAPS ARE 3XMORE RESISTANT TO ROTATIONAL FORCES THAN STANDARD ISSUE CHINSTRAPS
ACH/LWH OPS-CORE CHINSTRAP FAST HELMET WITH OCC-DIAL
OPS-CORE CHINSTRAP STANDARD CHINSTRAP
STABLEUNST
ABLE
STABILITY MATTERS: CHINSTRAP COMPARISON
Helmets are worn for extensive periods of time under extreme environmental conditions. Therefore, materials
selected for helmet components must be able to withstand signicant amounts of wear and tear while also
providing the user consistent protection, comfort and support. These requirements can be contradictory and
difcult to achieve and often require innovative solutions and unique combinations of materials and parts.
A good example of this is the h elmet liner impact pad. Theoretically, the most comfortable pad would be very soft
so as to conform to different shape heads and cover as much surface area as possible to reduce pressure points.
But if this is accomplished, it will create unwanted heat du e to insulating effects, added weight due to increased
surface area, and moisture absorption in the open cell foam. The soft foam would also not be good at mitigating
impact energy caused by low speed impacts or shell backface deformation from projectiles.
Instead, Ops-Core uses different materials carefully designed and chosen to work in combination with one another
to provide the desired performance benets. The resulting components represent just a few of the many ways we
are trying to improve the comfort, ventilation, protection, and stability of our 2011 products.
Closed cellmemorycomort oam
Low profle, yeteasily accessibledial mechanism ftsinside the Sentryhelmet shell orconvenient ftbandadjustment
Durableimpact layer isimpervious toenvironmentalconditions
Forehead pad iscushioned withoam and lined withsynthetic leatheror prolonged skincontact
Fitband side comortpad leaves noexposed edges
Impact Pads
Fitband
Worm Dial
Chin cup is linedwith genuineleather or comortand durability
New buckle iseasy to snap andrelease whilewearing gloves
Leather overlapsthe webbing toeliminate hard edges
8
-
8/7/2019 2011 Ops-Core Catalog
6/21
FAST HELMETS COLORS / CAMOUFLAGE
Red (Base Jump Only)
Foliage GreenUrban Tan Black
Desert MARPAT
FAST HELMETS ARE AvAILABLE IN
THE FOLLOWING COLORS:
MultiCam
11
-
8/7/2019 2011 Ops-Core Catalog
7/21
FAST BALLISTICHIGH CUTFAST High Cut models are available in both DSM Dyneema HB-26 and HB-80
ballistic core material options, which yield a shell weight reduction of morethan 20% (HB-26) and 35% (HB-80) over traditional ACH aramid shells whileproviding the same level of ballistic performance
High Cut shell provides the same amount of head coverage / size as the MICH2002 Gun-Fighter model
FAST Helmet fully loaded including VAS Shroud, ARCs, bungee lanyards,exterior loop and liner with integrated chinstrap (as shown here) weighs lessthan the same size MICH 2002 without any add-ons
Lightweight, multi-impact, ventilated liner with repositionable EPP impact padsand LDV closed-cell comfort foam is not affected by temperature, altitude, or
moisture
Occ-Dial adjustable tband with replaceable front, nape, and side pads quicklydetaches to allow convenient donning and dofng of COMMs headsets withheadbands
Integrated Head-Loc retention system gives the helmet 4x more stability thanstandard issue ACH helmet suspension and retention products
Comes standard with MARSOC / WARCOM night vision 3-hole mount pattern
All FAST Helmets feature
R E T E N T I O N S Y S T E M S
FAST High Cut
Head Coverage 98.6 in (636 cm)
S/Mcm of coverage on a
57.3 cm circumference head
M/Lcm of coverage on a
59.7 cm circumference head
L/XLcm of coverage on a
62 cm circumference head
Mediumcm of coverage on a
57.3 cm circumference head
Largecm of coverage on a
59.7 cm circumference head
X-Largecm of coverage on a
62 cm circumference head
Shell Surface Area
Shell Weight 1 .8 3 l bs ( 82 9 g )
Head Coverage
MICH 2002
153.2 in (988 cm)
Shell Surface Area
Shell Weight
96.6 in (623 cm)
157.6 in (1018 cm)
2 .4 5 l bs ( 11 12 g)
103.7 in (669 cm)
1 .9 7 l bs ( 89 3 g )
164.8 in (1063 cm)
103.7 in (669 cm)
2 .6 0 l bs ( 11 79 g)
167.4 in (1080 cm)
109.6 in (707 cm)
2 .1 4 l bs ( 96 7 g )
179.3 in (1157 cm)
110 in (710 cm)
2.86 in (1296 g)
177.3 in (1144 cm)
Understanding Coverage
Traditional methods for determining the amount of
protective coverage a helmet provides are based on
calculating the exterior surface area of the helmet shell.
However, it can be misleading when comparing different
helmet shapes because in this scenario, larger helmet
surface area does not necessarily mean larger head
coverage area. For this reason, Ops-Core uses standardized
computer modeling techniques to project a line-of-sight
shadow from a helmet onto the largest head-form for a
given helmet size. The surface area of this shadow is then
measured to yield the true amount of the head that would
actually be protected by this helmet as worn in real life.
FAST BALLISTIC HIGH CUT (M/L) PROJECTED COVERAGE ON HEAD-FORM(59.7CM CIRCUMFERENCE)
COVERAGE AREA: FAST BALLISTIC HIGH CUT VS. MICH 2002
MICH 2002 (Large)
HeadCoverage
HeadCoverage
13
FAST Helmets are available in the following colors: Black MultiCamDesertMARPATU rb an Tan Fol iag e Gr ee n
-
8/7/2019 2011 Ops-Core Catalog
8/21
FAST BALLISTICFULL EARAvailable in DSM Dyneema HB-26 and HB-80 ballistic core materials
Based on our standard FAST ballistic helmet, the Full Ear version offersincreased surface area to provide more head coverage than the ACH
Intended for use with inner-ear hearing protection andcommunications equipment, the lack of the ear bulge also yields alower prole and improves natural hearing localization and attenuation
*Thishelmet isnot compatiblewithearcupstylehearingprotectionandcommunicationproducts
FAST BALLISTIC FULL EAR (M/L)
COVERAGE AREA: FAST BALLISTIC FULL EAR VS. ACH
ACH (Large)
HeadCoverage
HeadCoverage
PROJECTED COVERAGE ON HEAD-FORM(59.7CM CIRCUMFERENCE)
FAST Full Ear
Head Coverage 109.8 in (708 cm)
S/Mcm of coverage on a
57.3 cm circumference head
M/Lcm of coverage on a
59.7 cm circumference head
L/XLcm of coverage on a
62 cm circumference head
Mediumcm of coverage on a
57.3 cm circumference head
Largecm of coverage on a
59.7 cm circumference head
X-Largecm of coverage on a
62 cm circumference head
Shell Surface Area
Shell Weight 1 .8 9 l bs ( 85 5 g )
Head Coverage
ACH/MICH
166.4 in (1073 cm)
Shell Surface Area
Shell Weight
104.5 in (674 cm)
168.1 in (1084 cm)
2 .6 9 l bs ( 12 20 g)
115 in (742 cm)
2 .0 3 l bs ( 92 0 g )
178.2 in (1150 cm)
111.7 in (721 cm)
2 .7 7 l bs ( 12 58 g)
178.8 in (1154 cm)
121.8 in (786 cm)
2 .2 0 l bs ( 99 9 g )
193.6 in (1249 cm)
119.4 in (770 cm)
3 .1 0 l bs ( 14 04 g)
192.7 in (1243 cm)
Understanding Coverage
Traditional methods for determining the amount of
protective coverage a helmet provides are based on
calculating the exterior surface area of the helmet shell.
However, it can be misleading when comparing different
helmet shapes because in this scenario, larger helmet
surface area does not necessarily mean larger head
coverage area. For this reason, Ops-Core uses standardized
computer modeling techniques to project a line-of-sight
shadow from a helmet onto the largest head-form for a
given helmet size. The surface area of this shadow is then
measured to yield the true amount of the head that would
actually be protected by this helmet as worn in real life.
15
FAST Helmets are available in the following colors: Black MultiCamDesertMARPATU rb an Tan Fol iag e Gr ee n
-
8/7/2019 2011 Ops-Core Catalog
9/21
This new helmet shell provides the same level of protective coverage and meets all ofthe US Armys ACH CO/PD-05-04 2007 requirements with a shape that offers signicantadditional performance benets
The Sentrys ballistic shell is based on FAST helmet pedigree with hybrid mate rialsweighing a 1/2 lb. less than the ACH, but with processing improvements to provide evenbetter ballistic backface deformation performance of less than 5/8 (16 mm)
This rened shell shape also provides better hearing localization and attenuation thanthe ACH with a modied ear area shape and is compatible with ARC rail mounted Peltorstyle hearing protection and COMMs devices
The Sentry utilizes an improved liner and suspension system that provides the samecomfort and stability as our FAST helmets but with increased protection by mitigating
blunt trauma impacts of 14 f/s instead of the traditional ACH requirement of 10 f/s
New Worm-Dial occipital tband adjustment system takes up less interior helmetspace and weighs less than the rotary dial version used on our FAST helmet models
SENTRY (Large)
COVERAGE AREA: SENTRY (LIGHTWEIGHT ACH) VS. ACH
ACH (Large)
HeadCoverage
HeadCoverage
PROJECTED COVERAGE ON HEAD-FORM(59.7CM CIRCUMFERENCE)
SENTRY (ACH)
Head Coverage 104.7 in (675 cm)
Mediumcm of coverage on a
57.3 cm circumference head
Largecm of coverage on a
59.7 cm circumference head
X-Largecm of coverage on a
62 cm circumference head
Mediumcm of coverage on a
57.3 cm circumference head
Largecm of coverage on a
59.7 cm circumference head
X-Largecm of coverage on a
62 cm circumference head
Shell Surface Area
Shell Weight 2 .0 0 l bs ( 90 6 g )
Head Coverage
ACH/MICH
171.7 in (1108 cm)
Shell Surface Area
Shell Weight
168.1 in (1084 cm)
112 in (723 cm)
2 .1 2 l bs ( 96 3 g )
179.7 in (1159 cm)
178.8 in (1154 cm)
120.2 in (775 cm)
2 .2 5 l bs ( 10 22 g)
191.2 in (1233 cm)
192.7 in (1243 cm)
104.5 in (674 cm)
2 .6 9 l bs ( 12 20 g)
111.7 in (721 cm)
2 .7 7 l bs ( 12 58 g)
119.4 in (770 cm)
3 .1 0 l bs ( 14 04 g)
Understanding Coverage
Traditional methods for determining the amount of
protective coverage a helmet provides are based on
calculating the exterior surface area of the helmet shell.
However, it can be misleading when comparing different
helmet shapes because in this scenario, larger helmet
surface area does not necessarily mean larger head
coverage area. For this reason, Ops-Core uses standardized
computer modeling techniques to project a line-of-sight
shadow from a helmet onto the largest head-form for a
given helmet size. The surface area of this shadow is then
measured to yield the true amount of the head that would
actually be protected by this helmet as worn in real life.
SENTRY (LIGHTWEIGHT)ACH
17
FAST Helmets are available in the following colors: Black MultiCamDesertMARPATU rb an Tan Fo li ag e G ree n
-
8/7/2019 2011 Ops-Core Catalog
10/21
FAST CARBON
Lightweight carbon ber shell
Ideal for recce operations, fast roping, climbing and training
Designed with the structural integrity to comfortably supportbinocular style NVGs without the use of counterweights
Identical to Ballistic High Cut version except for shell
All FAST Helmets feature
R E T E N T I O N S Y S T E M S
Features
19
FAST BASE JUMP
Base Jump helmet is the same design as the Ballisticand Carbon FAST helmets but with a polycarbonateshell and molded front NVG mount
Great for training, search and rescue, climbing, andother outdoor activities. It offers all the benets andfeatures of FAST helmets at a lower cost, comparableto other recreational sport helmets
FAST Base Jump helmet is available in two versions:Sports and Military
Features
Under-the-chin sports style chinstrap with a cover sock foradded comfort
Alternate EPS impact liner material to pass more stringentblunt impact testing standards
Over-the-chin military style chinstrap
Bungees for NVG stability
Exterior painted with solid CARC colors for greater durabilityand reduced reectivity
SPORTS VERSION FEATURES: MILITARY VERSION FEATURES:
Available in the following colors: Black MultiCam
Desert
MARPATUrban Tan Foliage Green Available in the following colors: RedBlack MultiCamDesertMARPATU rb an Ta n Fo li ag e G ree n
-
8/7/2019 2011 Ops-Core Catalog
11/21
40
80
120
160
Exterior Surface Area (shown)
Helmet Version
Values calculated byprojecting area coveredby armor onto 59.7 cmcircumference headform
(largest head / helmet size)
Protected HeadSurface Area
97 in2
(626 cm2)
154 in2 (994 cm2)
104 in2(670 cm2)
167 in2 (1080 cm2)
ACH(Largesize)
MICH 2002(Largesize)
MICH 2001(Largesize)
112 in2(721 cm2)
179 in2 (1154 cm2)
Sentry ACH(Lsize)
112 in2(723 cm2)
180 in2 (1159 cm2)
FAST Full Ear(M/Lsize)
115 in2(742 cm2)
178 in2 (1150 cm2)
FAST High Cutwith Side Armor
104 in2(669 cm2)
124 in2 (777cm2)
167 in2 (1077 cm2)
189 in2 (1221 cm2)
FAST High Cutwith Mandible
104 in2(669 cm2)
241 in2 (1553 cm2)
20 in2
63 in2(408 cm2)
FAST High Cut(M/Lsize)
104 in2(669 cm2)
165 in2 (1063 cm2)
WEIGHT SUMMARY
SYSTEM LEVEL HEAD COVERAGE
Side Armor ProtectionMandible Protection
THE OPS-CORE FAST HELMET SySTEM PROvIDES ON-THE-FLy CAPAbILITy TO INCREASE THE
AMOUNT OF PROTECTED HEAD COvERAgE OvER ANy OTHER HELMET AvAILAbLE TODAy
63in2 (408cm2) 104in2 (669cm2) 20in2 (128cm2)
(488cm2)
mandible
exterior
(1159cm2)
helmet
exterior
(156cm2)
side armor
exterior
HB-26 Ballistic (shell only) 1 .83 lb s(82 9 g) 1 .97 lb s(8 93 g ) 2 .14 lb s(9 67 g )
HB-80 Ballistic (shell only) 1 .56 lbs(7 08 g ) 1 .76 lb s(7 98 g ) 1 .99 lb s(9 03 g )
HB-26 (complete) 2.69 lbs(1220g) 2.85 lbs(1291g) 3.02 lbs(1371g)
HB-80 (complete) 2.42 lbs(1097g) 2.64 lbs(1196g) 2.87 lbs(1301g)
FAST High CutS/M53-56 cm
M/L56-59 cm
L/XL59-61 cm
Hybrid UHMWPE (shell only)
Hybrid UHMWPE (complete)
2.00 lbs(906g)
M53-57 cm
2.86 lbs(1297g)
2.25 lbs(1022g)
XL59-61 cm
3.14 lbs(1423g)
2.12 lbs(963g)
L57-59 cm
3.00 lbs(1360g)
2.38 lbs(1082g)
XXL61-63 cm
3.27 lbs(1485g)
FAST Sentry
S/M53-56 cm
M/L56-59 cm
L/XL59-61 cm
Shell Only 0 .59 lb s(26 7g ) 0 .65 lb s(29 4 g) 0 .73 lb s(32 9g )
Complete 1 .39 lb s(63 0g ) 1 .46 lb s(66 1 g) 1 .54 lb s(69 9g )
FAST Carbon
S/M53-56 cm
M/L56-59 cm
L/XL59-61 cm
Shell Only 0 .59 lb s(25 9g ) 0 .65 lb s(29 3 g) 0 .72 lb s(32 5g )
Military Version (complete) 1 .31 lb s(59 6g ) 1 .39 lb s(63 0 g) 1 .46 lb s(66 2g )
Sport Version (complete) 1 .27 lb s(57 7g ) 1 .35 lb s(61 1 g) 1 .42 lb s(64 3g )
FAST Base Jump
Aramid Ballistic (shell only)
Aramid Ballistic (complete)
2.69 lbs(1220g)
3.05 lbs(1382g)
3.10 lbs(1404g)
3.49 lbs(1582g)
2.77 lbs(1258g)
3.13 lbs(1420g)
3.75 lbs(1707g)
4.11 lbs(1863g)
US ARMY ACHM54-57 cm
L57-59 cm
XL59-61 cm
XXL61-66 cm
Aramid Ballistic (shell only)
Aramid Ballistic (complete)
2.45lbs(1112g)
2.80 lbs(1274g)
2.86 lbs(1296g)
3.21 lbs(1458g)
2.58 lbs(1170g)
2.96 lbs(1341g)
MICH 2002M54-57 cm
L57-59 cm
XL59-61 cm
Aramid Ballistic (shell only)
Aramid Ballistic (complete)
2.16 lbs(982g)
2.52 lbs(1144g)
2.65 lbs(1200g)
3.00 lbs(1362g)
2.33 lbs(1057g)
2.69 lbs(1219g)
MICH 2001M54-57 cm
L57-59 cm
XL59-61 cm
S/M53-56 cm
M/L56-59 cm
L/XL59-61 cm
Hybrid UHMWPE (shell only)
Hybrid UHMWPE (complete)
FAST Full Ear
1.89 lbs(855g) 2.03 lbs(920g) 2.20 lbs(999g)
2.75 lbs(1246g) 2.91 lbs(1318g) 3.09 lbs(1340g)
1.75
2.00
2.25
2.50
2.75
ACH(Largesize)
MICH 2002(Largesize)
MICH 2001(Largesize)
FAST High Cut(M/Lsize)
FAST Full Ear(M/Lsize)
2.03 lbs(920 g)
2.33 lbs(1057 g)
2.58 lbs(1170 g)
2.77 lbs(1258 g)
1.97 lbs(893 g)
Sentry ACH(Lsize)
2.12 lbs(963 g)
Helmet Shell Weight Chart
-
8/7/2019 2011 Ops-Core Catalog
12/21
Testing Standard
Threat
Description
Environmental Conditions
Chinstrap Retention
Test Requirement
Base Jump Military
Base Jump Sport
Ballistic High Cut
Carbon
Ballistic Full Ear
Sentry
Hemi Anvil x2 Impacts: 10 f/s (3 m/s)
Less than 150Gs forcetransmitted to head / brain
Less than 150Gs forcetransmitted to head / brain
2012
2012
2012
2012
2012 2012
2012
2012
2012
Less than 300Gs forcetransmitted to head / brain
Less than 10Kn (approx 200 Gs) forcetransmitted to head / brain
Blunt Impact:14F / 77F / 130F(-10C / 25C / 54C)
Blunt Impact:14F / 77F / 130F(-10C / 25C / 54C)
-13F / 68F / 100F(-25C / 20C / 38C)
-4F / 68F / 95F(-20C / 20C / 35C)
113 lbs (500N)4kg @ 11.2 f/s (3.4 m/s)Withstands 25 f/s (7.6 m/s) drop
and 150 lb (68 kg) static loadWithstands 25 f/s (7.6 m/s) drop
and 150 lb (68 kg) static load
Hemi Anvil x2 Impacts: 14 f/s (4.3 m/s) Top Impact Velocity:
Side Impact Velocity:
Front Impact Velocity:
Rear Impact Velocity:
20 f/s (6 m/s)
10 f/s (3 m/s)
10 f/s (3 m/s)
10 f/s (3 m/s)
EN 12492:2002
Mountaineering Helmet
ASTM F2040
ACHSpecification
CO/PD-05-04:2007
2011 LightweightACH Blunt
ImpactProtection (Threshold)RecreationalSnow Sports
Hit on Hemi Anvil:
Hit on Edge Anvil:
Hit on Flat Anvil:
16 f/s (4.8 m/s)
15 f/s (4.5 m/s)
20 f/s (6.2 m/s)
BALLISTIC PERFORMANCE BLUNT IMPACT PROTECTION
V 50 B L( P) at 0 O bl iq ui ty V 50 B L( P) at 45 O bl iq ui ty B FD
4 - grain (RCC) 3450 f ps (1051. 5 m /s) 3675 f ps (1120m /s)
2 - grain (RCC) 4075 fps (1242 m/s) 4740 fps (1445 m/s) --
64 - grain (RCC) 1700 fps (518 m/s) 1950 fps (594 m/s) --
16 - grain (RCC) 2425 fps (739 m/s) 2550 fps (777 m/ s) --
Battle Axe 75 fps(23 m/s)50 fps (15 m/s) --
17 - grain (FSP) 2150 fps(670 m/s) ----
9mm FMJ (V0at 0Obliquity) 1450 fps(442 m/s) --
-
8/7/2019 2011 Ops-Core Catalog
13/21
EXTERIOR MOUNTING SYSTEMENVIRONMENTAL TESTING
MANDIBLES O2 MASKS SIDE ARMOR
NIGHT VISION GOGGLES GOGGLES COMMs HEADSETS
VIDEO CAMERAS ACCESSORY ADAPTERS
ILLUMINATORS IFF DEVICES
FAST bALLISTIC HELMET SHELL IS JUST AS STRONg AND DURAbLE AS A TRADITIONAL ACH ARAMID SHELL, WHILE bEINg TWO THIRDS OF ITS WEIgHT.
400lbs
TOP TO BOTTOM: COMPRESSION RESISTANCE SIDE TO SIDE: COMPRESSION RESISTANCE
24 25
Compression Resistance
Environmental Testing
FAST Ballistic:FAST Base Jump:
-60F (-51C)-13F (-25C)
FAST Ballistic:FAST Base Jump:
160F (71C)100F (38C)
Seawater Immersion:Submerged 3ft (1m) for 3 hours
Corrosion Resistance:DEET,Gasoline, Motor Oil,Hydraulic Fluid,
Aviation JP-8 Fuel,Rie Cleaning Compound,Lubrication Oil,Face Paint
Flame Resistance:Helmet shell is self-extinguishing
according to FED-STD-191Method 5905.1
-
8/7/2019 2011 Ops-Core Catalog
14/21
SIDE ARMORFOR FAST HELMETS
Up-Armor Side Covers are available in Ballistic a nd Non-Ballistic versions
Attachment to FAST Helmet ARCs is tool-less and takes less than a minute
Both versions feature identical durable carbon ber e xterior
Ballistic version comes with a ballistic puck and gives the user the ability to quickly switchfrom offensive to defensive postures
Non-Ballistic version provides environmental ear protection option for FAST Carbon and
Base Jump helmetsLow prole design does not interfere with sighting shoulder weapons (even with iron sights)
Features
GUNSIGHT MANDIBLEFOR FAST HELMETS
The mandible uses a combination of soft armor and support frame technology toprovide lower face protection from frag, ying debris, bumpy vehicle rides, as well asfor ATV training exercises and rough terrain landings during airborne operations
It quickly and easily attaches and detaches from the helmet side rails
The mandible is exible and is designed to fold in half to conveniently tinto a rucksack
The exibility allows a close cheek weld and causes minimum interference
with sighting shoulder weapons
Features
26 27
Available in the following colors: BlackU rb an Ta n Fo li ag e G re en Available in the following colors: MultiCamDesertMARPATUrban Tan
-
8/7/2019 2011 Ops-Core Catalog
15/21
Fits Para-Flite PHAOS and Carleton Phantom O2 Masks
Streamlined snag-free design that quickly attaches and releases from the helmet rails
Has a Snap Dragon bayonet buckle with a quick release feature
Head-Loc tabs allow on the y adjustment for tightening and loosening the t of the mask
O2 MASK STRAPS
ACH O2 SINGLE STRAP KIT FAST O2 SINGLE STRAP KIT
HEADSETS
PELTOR COMTAC ARC HEADSET
Third generation COMTAC Headset from Peltor
Features external microphones for talk-thru capability so the users can maintain situationalawareness while still protecting their hearing
Compatible with all FAST Helmets, except FAST Ballistic Full Ear
Attaches to the side rails instead of using the traditional headband
Exterior mounting eliminates pressure points on the head from extended wear
The mounting arms snap in and out, and can be individually rotated to the back of the helmet
Available in multiple colors, and radio and COMM congurations
28 29
Available in the following colors:
BlackU rb an Tan Fo li ag e Gr ee n
-
8/7/2019 2011 Ops-Core Catalog
16/21
ACH UPGRADES
OCC-DIAL LINER KIT
VAS SHROUDACH-ARCACCESSORY RAIL CONNECTORS
HEAD-LOCRETENTION SYSTEM
-
8/7/2019 2011 Ops-Core Catalog
17/21
The H-Nape is intended for operators conducting rigorous activities while wearing NVGs like the PVS-15 or
ANViS-9 with heavier accessories mounted to the helmet. This added weight and subsequent CG problems
can make the helmet (and NVGs) unstable and cause it to rotate or slip front to back during use. When
NVGs are not stable they are difcult to see through and when they are difcult to see throug h, they are
not effective. We have received reports of helmets being so unstable that they slipped and h it users in the
face, hard enough to cause disorientation which c an be detrimental when trying to operate a vehicle or
control a canopy.
H-Nape Chinstrap
Features (H-Nape and X-Nape)
EASE OF USE
Patented Head-Loc tabs provide instant one-handed chinstrap adjustment while wearing the helmet
SIMPLIFIED STRAP GEOMETRY
Straight force lines and unique design eliminate loose ends
COMFORT
Padded leather chin cup and nape pad provide support during long missions
Custom webbing weave provides greater durability and ventilation
Available in left or right eye congurations to keep buckle on opposite side of weapon sighting
Chinstraps & Extenders are available in: Foliage GreenUrban Tan Black
HEAD-LOC
RETENTION SYSTEMS
- Airborne Certied for USSOCOM -
Fleece Chincup /Extender Cover
(Sold Separately)
Nape-RepositionableVersion
StandardVersion
X-Nape Chinstrap
The X-Nape is intended for users conducting rigorous activities while wearing lighter NVGs like the PVS-14
or having smaller accessory equipment mounted to the helmet. Without the added weight of heavier
devices, the X-Nape provides the same security and comfort as the H-Nape and does not require a fth
adjustment point on the back. Unlike competitor designs that require removal of the mounting screws
to set the height of the nape pad, the X-Nape version self-adjusts to the back of the skull resulting in an
ultra-clean, low-prole system.
Featuring:
Gas Mask Extender(Sold Separately)
Ballistic Hardware
33
-
8/7/2019 2011 Ops-Core Catalog
18/21
Lightweight, multi-impact, ventilated liner system with repositionable EPP impact pads and LDVclosed-cell comfort foam that is not affected by temperature, altitude, or moisture
Pads are pre-molded to the shape of a head - no more at blocks
Occ-Dial adjustable tband with replaceable leather front, nape, and side pads quickly detachesto allow convenient donning and dofng of COMMs headsets with internal top headbands
Integrated Head-Loc chinstrap retention system gives helmet 4x more stability than standardissue ACH helmet suspension / retention
Easily installs using existing Velcro hook interior disks and chinstrap mounting holes
Fits ACH / MICH 2000 helmets and ACH / MICH 2002 Gunghter Cut helmets
*Does notftMICH 2001, RBR, Protech, oranyother stylehelmetthat doesnotuse theACH chinstrap
mountingholepattern
Features
OCC-DIAL LINER KIT
Occ-Dial Liner Kits feature
R E T E N T I O N S Y S T E M S
VAS
SHROUDFeaturesSnag-free for HALO, HAHO and static line operations
All aluminum construction with powder coated nish and stainless steel ballistic hardware
Fits all ACH, MICH, PASGT, and LWH helmets with the MARSOC / WARCOM 3-hole mount pattern
Includes a foam gasket that prevents vibration and wobble
Ideal for replacing the original helmet hook and strap mounting system
It is the lightest, lowest prole, least obtrusive, and least expensive permanent NVG mountingsolution currently available
Mount arms sold separately
Helmet Compatability
Fits the standard MARSOC/ WARCOM3-hole NVDmountpattern
NVG &Mount Arm Compatability
The Ops-Core VAS Shroud is compatible with thefollowing combinations of nightvision goggle andmountarm styles
VAS Shroud Compatibility
NVG Style
PVS-7B/7D
PVS-14
PVS-15
PVS-18
PVS-21
PVS-7A/7C
US ArmyStandardMountArm
#A3256368
Wilcox G09Mount Armwith Break-AwayBase
#28300G01
Wilcox L4G24MountArm
#28300G24
Wilcox L4G20MountArm
#28300G20
Norotos INVGMountArm
#1820010
Norotos AKA2MountArm
#1840010
35
VAS Shrouds are available in the following colors: BlackU rb an Ta n Fo li ag e G re en
Occ-Dial Kits are available in:
BlackU rb an Ta n Fo li ag e G ree n
-
8/7/2019 2011 Ops-Core Catalog
19/21
Increasingly popular helmet mounting solution that allows theoperator to customize the helmet to his/her specic use withvarious accessories
Improved lower prole version of the 2007 design withadditional mounting features
Upper and lower dovetails support lights, cameras, goggles, etc.
Compatible with O2 Single Strap Kit
New design allows instant donning and dofng of mandible andface protection solutions for the ACH
Snag-free for HALO, HAHO and static line operations
Uses existing chinstrap mounting holes
Available with or without NVG stabilizing bungees
Kit includes two ARC Rails and the followingadapters and mounting hardware:
Shown with
RevisionMandible
2010 ACH-ARCACCESSORY RAIL CONNECTORS
Features
Surefre E1L
Streamlight TLR-1
RAIL ADAPTERSFOR ACH/FAST ARC
PICATINNY ADAPTER X300 ADAPTER
VIO POV1video camera
SINGLE CLAMP SWIVEL CLIPSThese clips attach to upper and lower rail dovetails to provide instant and secure
attachment of straps while still providing rotational freedom of motion
Ideal for attachment of O2 masks, goggles, and other accessories
Insight M3 Surefre X300
36mmGoggle Swivel Clip
19mmSwivel Clip
36
Rails are available inthe following colors: Black U rb an Tan Fo li ag e G ree n
-
8/7/2019 2011 Ops-Core Catalog
20/21
Infrared and visible light switching
Weighs 58 grams
Refer to VAS Shroud chart for NVG compatibility Simple, reliable light source with multiple mounting options which provide lightwhere you need it, when you need it
LED Color options: Red, Green, Blue, White or IR
Professional quality 1080p / 960p / 720p HD resolutionsrecord at 30 and 60 frames per second (60 f/s in 720p)
Waterproof quick-release housing (180 / 60 m)
Smallest and lightest hands free video camera in theworld (122 grams)
Captures beautiful 1080p video
135 wide-angle lens
Fully integrated point-of-view (POV)video system thats waterproof, dustproof, and shock-resistant
720x480 resolution at 30fps
ACCESSORIES
L4-G24210 grams
with hardware
IFF ILLUMINATIONNVG MOUNTS TACTICAL VIDEO SPORT VIDEO CAMERAS HEADLAMPS
L4-G20198 grams with
hardware
www.wilcoxind.com www.vliteusa.com www.vio-pov.com
POV 1.5 MPLS
REMIXHD HEROCONTOUR HD
MANTA
STROBE
www.contour.com www.goprocamera.com www.princetontec.com
38
-
8/7/2019 2011 Ops-Core Catalog
21/21
OPS-CORE, INC.
319 A Street RearGround FloorBoston, MA 02210
Tel: 617.670.3547Fax: 617.670.3581
www.ops-core.com
MADE IN USA
top related