1 caenable ltd. copyright 2006 caenable, ltd – confidential information. duplication or...
Post on 29-Jan-2016
215 Views
Preview:
TRANSCRIPT
1
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Engineering Competencies
Design of Metal Brackets,Fixtures, Gages &
Anti-vibration Products
Computer Aided DesignFinite Element Analysis
Noise AnalysisConcurrent Engineering...
2
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Concurrent Design Engineering
CAD -Computer Aided DesignGD&T -Geometric Dimensioning & TolerancingFEA -Finite Element AnalysisVA/VE -Value & Engineering AnalysisAPQP -Advanced Product Quality PlanningFMEA -Failure Modes & Effects AnalysisPPAP -Production Part Approval Process
3
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Modal Analysis
■ FFT Analysis■ Vibration Analysis■ Noise Analysis
4
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Types of FEA:
■ Static FEA■ Dynamic FEA■ Shape Optimization FEA New!New!
5
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Static FEA:
Stress/Strain AnalysisModal AnalysisLarge deformationNon-linearHyper-elasticsis
6
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Dynamic FEA:
■ Crash Analysis■ Buckling Analysis■ Metal Forming
7
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Static FEA Example
■ Rectangular■ Flat Sheet■ Corner load■ Left edge fixed
8
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Dynamic FEA Optimization
■ Start with a Rect. Plate (as an example)
■ Apply the expected loads & boundary conditions
9
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Dynamic FEA Optimization
■ Sculpts it for you based on the Loads & Boundary Conditions
■ Unconventional Designs & Non-Intuitive Designs
10
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
FEA Optimized Design 1
■ Load -Fy at top right■ Left edge fixed■ Results in a different
optimal solution!
11
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
FEA Optimized Design 2
■ Load -Fy at Top Center■ Bottom edge fixed■ Same plate, different
optimal design...
12
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
FEA Optimized Design 3
■ Added load -Fx at Top Center
■ Nonintuitive design■ Optimal designs &
solutions for Multiple / Asymmetric Loads
13
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
FEA Optimized Design 3a
■ Not an intuitive design■ Finds solutions for
Multiple / Asymmetric Loads
14
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
FEA Optimization
■ How it works...■ Results:
Novel Design Concepts Shapes not normally
intuitive
16
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Ex. Cast Wheel
■ 3D BREP Model of an Cast Aluminum Wheel
17
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Linear FEA:
■ Von Mises Stresses
18
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
FEA Modal Analysis
■ 0.8 Hz (one of several)
19
CAEnableLtd.
Copyright 2006 CAEnable, Ltd – Confidential Information. Duplication or distribution prohibited.
Questions?
top related