www.moriseiki.eu

Aerospace IndustryPURE TECHNOLOGY – System partner

5-Axis-machining - Engine component

The aerospace industry combines nearly

all of the high technologies of the information

age: electronics, robotics, measuring,

controls, materials and control technique.

MORI SEIKI has adapted to these demands

for a long time and is constantly developing

specifi c solutions for this industry.

MORI SEIKI Aerospace Industry 2 | 3

The aerospace industry is the “technologydriver” for the modern economy - MORI SEIKI is your partner.

Whatever the demands, our engineering and

application teams make sure you get highly

effi cient, made to measure solutions.

| 1 landing frame – demands the highest technique | 2 represents a high effi cient turbo engine | 3 turbo engine in use

Component spectrumMade to measure solutions for your production.

Horizontal machining of an aircraft frame

Made to measure solutions for your production – from classic materials to titanium and inconel.

MORI SEIKI Aerospace Industry 4 | 5

| 1 complete machining of a landing gear axle | 2 structure part | 3 landing gear axle made from inconel | 4 turbo engine impeller | 5 turbo engine casing

1

4

3

5

For years MORI SEIKI has been a systems partner for the aerospace

industry. Through constant development of modern production solutions

for the various structures and parts for turbines we have become

specialists in the industry.

2

Systems PartnerKnow-how, worldwide quality standards and a reliable network of technical engineers.

Management supportMORI SEIKI supports and offers advice in various areas, for example investment planning or relocation in production.

Service and Maintenance

Optimal support in service, operation, maintenance and spare parts supply guarantee the best in reliability.

Aerospace Systems Partner – know-how, worldwide quality standards and a reliable network of technical engineers.

MORI SEIKI Aerospace Industry 6 | 7

MORI SEIKI not only offers aerospace pro-

duction techniques from a range of more

than 200 machining centres, but also a world-

wide network of professionals that can offer

you advice from tool selection and program-

ming to installation and maintenance.

Our engineering team continuously works

on offering customer specifi c complete

solutions. MORI SEIKI offers solutions for a

problem free production start.

Technical Support

We offer you solutions for your production. From programming and tool selection to test cutting and installation.

Production SupportProcess solutions are constantly being optimised. Our application technicians are always available for all questions and problems in production.

CUSTOMER

ProductsThe right product for your production.

NMV Series Facts: | DCG® technology and excellent Box-in-Box construction with zero overhang| High-rigidity table with DDM™ (Direct Drive Motors) at the B- and C-axes| B-axis-indexing range 340° and full C-axis rotary table – up to 1,200 min-1*| Revolutionary Octagonal Ram Construction (ORC™) supports high-speed and precision feed at the Z-axis| MAPPS III: simple conversational functions, 3D interference checking function*optional NMV5000 DCG

NMV Series – 5-Axis machining with direct drive system at the rotary axes.

5-Axis Machining Centres

Technical Details NMV5000 DCG NMV8000 DCG/40 NMV8000 DCG/50Axis travel X-/ Y-/ Z- mm 730/510/510 1.200/920/610 Max. travel C-/B axis 360°/340° 360°/340° Table work surface mm ø 500 ø 800Max. workpiece size mm ø 700 x 450 ø 1.000 x 500 Max. workpiece weight kg 300 1.000Max. spindle speed min-1 12.000 [20.000] 12.000 [20.000] 10.000 [15.000] Rapid traverse rate m/min X, Y: 50, Z: 40 X, Y, Z: 40

min-1 C: 120 [500, 1.200], B: 35 [50] C: 100, B: 25[ ] optional

MORI SEIKI Aerospace Industry 8 | 9

NH Series Facts: | Choose from 4 pallet sizes to meet all customers needs| DCG® technology and Box-in-Box construction offer low vibration and good acceleration| Full 4th axis rotary table with Direct Drive Technology (DDM™) and minimum table indexing range 0,001°*| Wide variety of automation solutions with MORI SEIKI’s Pallet Pool Systems| MAPPS III: simple conversational programming*optional

NH Series – Horizontal machining centres with remarkable technique and automation.

Horizontal Machining Centres

Technical Details NH5000 DCG NH6300 DCG NH8000 DCGAxis travel X-/ Y-/ Z- mm 730 / 730 / 850 900 / 800 / 980 1.400 / 1.200 / 1.350Pallet working surface mm 500 x 500 630 x 630 800 x 800 Max. workpiece weight kg 500 [700] 1.200 2.000Max. Spindle speed min-1 14.000 [20.000] 10.000 [8.000] [15.000] 10.000 [8.000] [15.000] [18.000]Rapid traverse rate X/Y/Z m/min 50 50 50No. of tools capacity 40 [-240] 40 [-330] 40 [-330]Spindle drive motor kW 22/18,5 30/25 30/25

| 1 horizontal machining of an aircraft frame | 2 NC rotary table with 2 Direct Drive Motors| 3 effective cutting optimised for your needs

ProductsThe right product for your production.

NT Series – no compromise integration of milling and turning machining.

NT Series Facts: | Complete machining with a maximum of 2 spindles and 2 turrets for 9 controlled axes| DCG® Technology at the X- and Z-axis | Sturdy column with Box-in-Box construction and octagonal ram (ORCTM) at the Y-axis for extreme rigidity| B-axis with DDM™ (Direct Drive Motor) with a rotation range of +/- 120°| MAPPS III with 3D interference checking function

Integrated Mill Turn Centres

Technical Details NT3100 DCG NT3150 DCG NT3200 DCG NT4200 DCG NT4250 DCG NT4300 DCG NT5400 DCG

Max. bar diameter mm Ø 40 Ø 52 Ø 65 Ø 65 Ø 80 Ø 90 Ø 103Max. machining length mm 1.022 1.022 1.022 1.596 1.562 1.518 1.800Max. machining diameter mm Ø 600 Ø 600 Ø 600 Ø 660 Ø 660 Ø 660 Ø 920Max. spindle speed min-1 6.000 (8.000)* 6.000* 5.000* 5.000* 4.000* 3.000* 2.400*Max. tool spindle speed min-1 12.000 12.000 12.000 12.000 12.000 12.000 8.000Axis travel X- /Y- mm 685 / ±125 685 / ±125 685 / ±125 750 / ±210 750 / ±210 750 / ±210 1.040 / ±255MAPPS III High-Speed-Programming *applies also for sub spindle, depending on design

NZ Series Facts: | Up to 3 built-in motor turrets (BMT™) for max. 48 direct driven tool stations | Simultaneous machining with max. 3 turrets and 3 programmes| Excellent milling performance – up to 3 Y-axes with the longest strokes in its class (110 mm)| MAPPS III: simple conversational automatic programming with 3D interference checking function

NZ Series – complete machining with up to 3 turrets each with Y-axis.

MORI SEIKI Aerospace Industry 10 | 11

CNC Multi-Axis Turning Centres

Technical Details NZ1500T3Y3 NZ2000T3Y3

Max. machining diameter mm 320 320 Max. machining length mm 260 260 Max. bar diameter mm 52 65 Axis travel X-/ Z-/ Y-/ B- (spindle 2) mm 210 / 300, 810 / 110 / 920 210 / 300, 810 / 110 / 920 Max. spindle speed min-1 6.000 5.000 Max. rotation of the driven tools min-1 6.000 [12.000] 6.000 [12.000] [ ] optional

MORI SEIKI NT machines and with this, new materials such as titanium and inconel have been predominantly used.

The ”Advanced Manufacturing Research Centre” in Sheffi eld works closely with our engineering department and together they develop new highly productive production techniques. For the past few years Sheffi eld has been manu facturing on

AMRC – University in Sheffi eldCooperation – the application of new materials such as titanium or inconel at the highest level.

AutomationThe right solution for all purposes.

| 1 Linear Pallet Pool system for large-variety production | 2 combination of lathes and machining centres for automated complete machining | 3 Carrier Pallet Pool systems with various confi gurations available

MORI SEIKI Aerospace Industry 12 | 13

Achieving competent automation solutions to

meet customer demands has been the task

for MORI SEIKI for years. With an engineering

team, that has a world-wide network of ex-

perience and know-how in diverse industries.

There are complete confi gured solutions

(CPP) as well as totally individual designed

Automation Free-Style – Engineering competence combined with a wide range of automation solutions

systems (LPP) available. MORI SEIKI is with

you from the planning, installation and

implementation to the integration of your

network.

LPP CPP

Scale

Number of machines Up to 8 units

Up to 2 units

Number of workpiecesetup stations

Up to5 sets

Up to2 sets

Number of palletstations

Up to99 stations

Up to29 stations

Number of palletshelves 2 levels 1 level

Choose to suit your needs:

GERMANY MORI SEIKI Stuttgart Antoniusstraße 14, 73249 WernauTel. +49 (0) 7153 934 0

MORI SEIKI Hamburg Merkurring 63 - 65, 22143 HamburgTel. +49 (0) 40 69 458 0

MORI SEIKI Düsseldorf Siemensring 19, 47877 WillichTel. +49 (0) 21 54 88 59 0

MORI SEIKI München Frankfurter Ring 117, 80807 MünchenTel. +49 (0) 89 35 744 0

MORI SEIKI Frankfurt Borsigstrasse 20, 66205 WiesbadenTel. +49 (0) 6122 92 777 0

FRANCEMORI SEIKI FRANCE S.A.S Paris Parc du Moulin, 1, Rue du Noyer BP 19326 Roissy en France, 95705 Roissy CDG Cedex Tel. +33 (0) 1 39 94 68 00

MORI SEIKI FRANCE S.A.S Toulouse 6, Impasse Lèonce Couture31200 ToulouseTel. +33 (0) 5 3425 29 95

MS SYFRAMO S.A.S. Chassieu 81, Avenue du Progrès, 69680 ChassieuTel. +33 (0) 4 78 90 95 95

MS SYFRAMO agence de Vougy 40, Rue du Stade, 74130 VougyTel. +33 (0) 4 50 18 03 43

REPMO377, Avenue du Président-Wilson 93214 Saint-Denis Tel. +33 (0)1 49 46 61 45

SCOMOParc d‘activités St-Martin-du-Touch 4, Rue Marius Tercé, 31300 ToulouseTel. +33 (0)5 61 78 85 85

SEVMORue Eiffel-CP 4007, 44806 Saint-HerblainTel. +33 (0)2 40 92 09 09

ITALYMORI SEIKI ITALIANA S.R.LMilanoVia Riccardo Lombardi N. 10 20153 MilanoTel. +39 02 48 94 921

BENEDETTO RUTIGLIANO S.R.L.S.S. 96 – KM 115+750 70026 Modugno (BA)Tel. +39 080 5356 802

Essedi S.p.A.Via dell‘ Artigianato, 1, 25080 Molinetto di Mazzano (BS)Tel. +39 030 2120 453

FM Macchine S.r.l.Via Tamigi, snc - 65016 Montesilvano (PE)Tel. +39 085 4683 818

H.T.M. S.r.l.Via di Le Prata, 146, 50041 Calenzano (FI)Tel. +39 055 882 6660

Micron S.p.A.Via Enrico Fermi, 7, 35030 Veggiano (PD)Tel. +39 049 900 6611

Moreno Macchine Utensili S.r.l.Via Grecia, 10 - 41100 Modena (MO)Tel. +39 059 418 611

Prisma Macchine Utensili S.p.A.Via Presolana, 920021 Baranzate di Bollate (MI)Tel. +39 02 356 4025

Sirtech S.p.A.Via Casilina Km. 131, 60003030 Piedimonte San Germano (FR)Tel. +39 0776 4020 87

Tecno Control S.r.l.Strada per Carrone, 3010019 Strambino (TO)Tel. +39 0125 637581

Tecnologia ed Automazione Industriale S.r.l.Via Ghisalba, 13 - 20021 Bollate (MI)Tel. +39 02 3830 6184

UKMORI SEIKI (UK) LTD.London202 Bedford AvenueSlough SL1 4RYTel. +44 (0) 870 240 9500

MORI SEIKI Birmingham4060 Lakeside, Solihull Parkway,Birmingham Business Park BIRMINGHAM B37 7YNTel. +44 (0) 870 240 9500

ContactAlways near by.

MORI SEIKI Technical Centres and Sales and Service partners

Europe-wide reliability. MORI SEIKI support with an overall network throughout Europe. Contact your regional partner.

SPAINMORI SEIKI ESPAÑA S.A.BarcelonaCalle de la Electronica, Bloque B, Nave 9 Poligono Industrial „La Ferreria“ 08110 Montcada I Reixac (Barcelona)Tel. +34 93 575 36 46

Juan Martin, S.L.Isaac peral, 6 08960 San Just Desvern (Barcelona)Tel. +34 933 715389

LM-Machinery S.L.C amino de Portuexe, 27 20018 San SebastianTel. +34 943 331000

CZECH REPUPLICMORI SEIKI GmbH Prague 6th fl oor of building No. 423, Evropska 178, 160 00 Praha 6Tel. +420 224 362 777

Newtech s.r.o.Evropska 423/178, 160 00 Praha 6Tel. +42 02 3309 0451

MORI SEIKI Sales & Service partners

AUSTRIACNC-PROFIMaschinen-Handels GmbHJosef-Jessernigg-Straße 16 2000 StockerauTel. +43 2266 67740

BELGIUMLandré Machines NVWarandestraat 2, 9240 ZeleTel. +32 2 257 1930

DENMARK C. Henriksen & Co.Baldersbuen 57, PB2162640 HedehuseneTel. +45 46 590 566

FINLAND Nugget OyOrmuspellontie 7, PL12100701 HelsinkiTel. +358 9 350 5380

GREECETechGroup425, Thivon Ave. & 4, Galeriou St, 131 21 AthensTel. +30 210 57 85 470

HUNGARYWamatec Hungary Kft.2040 Budaörs, Gyár u. 2 - BITEPTel. +36 23 503 933

IRELANDLister Machine Tools Ltd.PO Box. 838Bluebell Industrial Estate, Dublin 12Tel. +353 1450 8866

LITHUANIA StevilaMokolai 68460 MarijampoleTel. +370 343 918 01

NETHERLANDSLandré Machines BVLange Dreef 10, 4131 NH VianenTel. +31 3473 29 371

NORWAY BERGSLI METALLMASKINER ASBedriftsveien 64Kjørbekk 3735 SkienTel. +47 35 50 35 00

POLANDAPX Technologie Sp.z.o.oAl. Jerozolimskie 424A 05-800 PruszkówTel. +48 22 759 62 00

PORTUGALJuan Martin LDAJoao Pereira Venancio, Loja 42430 Marinha GrandeTel. +351 244 568610

ROMANIAS.C. Tezmaksan International s.r.l.Calea Victoriei Nr. 85, Bl. 1, Et. 1, Ap. 4, Sector 1, BucharestTel. +40 21 3139313

SLOVAKIA Newtech s.r.o.Sturova 5/9, 017 01 Považská BystricaTel. +421 424 340 611

SLOVENIABTS Company D.O.O.Bratislavska 5, SLO-1000 LjubljanaTel. +386 1 5841 400

SWEDENLundwalls ABEA Rosengrens Gata 5 -Box 2105 S-42102 Vastra FrölundaTel. +46 31 348 98 00

SWITZERLANDJosef Binkert AGGrabenstrasse 1, CH-8304 WallisellenTel. +41 44 832 55 55

www.moriseiki.eu