600-199_exam-libre
TRANSCRIPT
-
8/12/2019 600-199_exam-libre
1/4
Education Data Shee
All contents are Copyright 2013 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 4
Learning Services
Securing Cisco Networks with Threat Detection and
Analysis (SCYBER)
The Securing Cisco Networks with Threat Detection Analysis (SCYBER) course,version 1.0 is an instructor-led course offered by Learning Services High-Touch Delivery.
This lab-intensive training course prepares you to take the Cyber Security Specialist
Certification exam (exam ID = 600-199) and to hit the ground running as a security
analyst team member.
The course combines lecture materials and hands-on labs throughout to make sure that
you are able to successfully understand cyber security concepts and to recognize specific
threats and attacks on your network. This course is designed to teach you how a network
security operations center (SOC) works and how to begin to monitor, analyze, and
respond to security threats within the network. The job role for a security analyst will vary
from industry to industry and differ in the private sector versus the public sector.
Duration
Five days.
Target Audience
This course is designed for technical professionals who need to know how to monitor, analyze, and
respond to network security threats and attacks.
Course Objectives
Upon completion of this course, you should have obtained four major areas of competency:
Monitor security events
Configure and tune security event detection and alarming
Analyze traffic for security threats
Respond appropriately to security incidents
Cisco 600-199 Exam
600-199 Exam
-
8/12/2019 600-199_exam-libre
2/4
Education Data Shee
All contents are Copyright 2013 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 4
Learning Services
Course Prerequisites
Following is the recommended prerequisite training for this course:
Standard CCNA certification as a minimum with CCNA Security a plus
Basic Cisco IOS Software switch and router configuration skills
Course Outline
The course outline is as follows:
Module 1: Course Introduction: Overview of Network Security and Operations
Module 2: Network and Security Operations Data Analysis
Module 3: Packet Analysis
Module 4: Network Log Analysis
Module 5: Baseline Network Operations
Module 6: Preparing for Security Incidents
Module 7: Detecting Security Incidents
Module 8: Investigating Security Incidents
Module 9: Reacting to an Incident
Module 10: Communicating Incidents Effectively
Module 11: Postevent Activity
Lab Outline
The lab outline is as follows:
Lab 1: Assess Understanding of Network and Security Operations
Lab 2: Assess Understanding of Network and Security Data Analysis
Lab 3: Network and Security Data Analysis Team-Building Activity
Lab 4: Packet Capture Exercise 1
Lab 5: Packet Capture Exercise 2
Lab 6: Packet Capture Exercise 3
Lab 7: Understanding Log Data
Lab 8: Correlation Lab
Lab 9: Assessing Understanding
Lab 10: Mapping a Monitored Network Topology
Lab 11: Assessing Normal Behaviors of a Monitored Network
Lab 12: Assessing Current Security Controls
Lab 13: Assessing Current Monitoring System
Lab 14: Manually Correlating Events
Lab 15: Automatically Correlating Events
Lab 16: Identifying a Security Incident
Lab 17: Understanding NetFlow
Lab 18: NetFlow Practical Activity
Lab 19: Assessing Understanding
-
8/12/2019 600-199_exam-libre
3/4
Education Data Shee
All contents are Copyright 2013 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 4
Learning Services
Lab 20: Selecting Mitigations
Lab 21: Developing Mitigations
Lab 22: Documenting Incidents
Lab 23: Recommending Remediation
Lab 24: Improving Security Lab 25: Incident Response Challenge Lab
Lab Infrastructure and Topology
This lab infrastructure is designed to walk you through the process of understanding how
a network SOC works and then proceeds into the data security threat analysis and
response process.
The course uses software such as Lancope, Splunk, OSSIM, and Observium to simulate
some of the most current cyber security threats on the lab equipment. For example, in the
module Investigating Security Threats,you will perform the initial configuration of
NetFlow, followed by interpreting the traffic in the NetFlow environment. Similarly, you wilconfigure SNMP monitoring to work with the Observium software.
Figure 1 shows the high-level lab topology for this course.
Figure 1. Lab Topology
Remote
Access
Outside
PagentTraffic Gen
5520
1941
Layer 3SharedRouter1941
Zone 3
1941
Pod P
Zone 3
1941
Pod1
Student VmwareServers & XP
Client
Student VmwareServers & XP
Client
Class SupportSystems
Attack Tools
Zone 0
PacketC
apture
FlowCapture
Attack,Injection,
Replay
10.1.X.X
Network
10.2.X.X
Network
10.3.1.X
Network
10.1.1.4
10.1.1.1
10.2.2.1110.2.2.1P-2P
64.102.246.131
10.3.1.1 10.3.P.110.3.P.X
Network
10.3.1.10 10.3.P.10
Zone 1
Zone 2
Student Tools
ASA TIS
Controlled
10.1.1.2
StudentPods 2-12
-
8/12/2019 600-199_exam-libre
4/4
Education Data Shee
All contents are Copyright 2013 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 4
Learning Services
Registration Email
For more information about schedules and registration for this course, contact
Website Addresses for More Information
For more information on Learning Services for Cisco classic products and technologies, visit
www.cisco.com/go/ase.
For information on Cisco TelePresence
training, visitwww.cisco.com/go/telepresencetraining/.
For information on broadband video training for service providers, visit
www.cisco.com/go/spvtraining.
For information on Cisco WebEx
technology training, visitwww.cisco.com/go/webextraining.
For information on mobile Internet technology training, visitwww.cisco.com/go/mitg.
Americas Headquarters
Cisco Systems, Inc.San Jose, CA
Asia Pacific Headquarters
Cisco Systems (USA) Pte. Ltd.Singapore
Europe Headquarters
Cisco Systems International BV Amsterdam,The Netherlands
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices .
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, goto this URL: www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not implya partnership relationship between Cisco and any other company. (1110R)
600-199 Exam Questions
For Question answers and practice test of 600-199 exam please visit this web
mailto:[email protected]:[email protected]://www.cisco.com/go/asehttp://www.cisco.com/go/asehttp://www.cisco.com/go/telepresencetraining/http://www.cisco.com/go/telepresencetraining/http://www.cisco.com/go/telepresencetraining/http://www.cisco.com/go/spvtraininghttp://www.cisco.com/go/spvtraininghttp://www.cisco.com/go/webextraininghttp://www.cisco.com/go/webextraininghttp://www.cisco.com/go/webextraininghttp://www.cisco.com/go/mitghttp://www.cisco.com/go/mitghttp://www.cisco.com/go/mitghttp://bit.ly/600-199http://bit.ly/600-199http://bit.ly/600-199http://www.cisco.com/go/mitghttp://www.cisco.com/go/webextraininghttp://www.cisco.com/go/spvtraininghttp://www.cisco.com/go/telepresencetraining/http://www.cisco.com/go/asemailto:[email protected]