33434 mpc overview
TRANSCRIPT
-
8/16/2019 33434 MPC Overview
1/2
The Baker Hughes Mechanical Pipe Cutter™ (MPC™) electromechanical pipe-cutting tool
reduces logistical and environmental constraints of stuck pipe or pipe recovery operations
by providing precise, downhole pipe cutting without the use of ballistics or hazardous
chemicals, reducing rigsite down time, personnel risk, and overall intervention costs.
The MPC tool performs its precise cutting without damaging external tubulars or control
lines. Cutting penetration is continuously measured and controlled from the surface,
confirming the cut has been made successfully. The MPC tool’s temperature and pressure
ratings allow operators to cut pipe in hotter and deeper environments, while eliminating
expensive and time-consuming coiled-tubing or pipe operations.
Applications
Stuck pipe
2 7/8-in. to 7-in. downhole pipe
Features and Benefits
Precisely cuts downhole pipe without the
use of ballistics or hazardous chemicals
– Reduces logistical and
environmental constraints
Arrives in two 10-ft sections
– Allows for easy transportation for
quick offshore or remote deployment
CPU controlled for precise or
difficult cuts
– Ensures efficient cuts to reduce
debris and damage to outer strings
Unlimited setting and resetting
– Saves rig and NPT costs by
performing multiple cuts per trip
Surface-monitored cut penetration
– Confirms successful cut to avoid
needless trips out of hole
Cuts a wide range of pipe
types—including steel and alloy
(chrome) pipe—and sizes compared
to the traditional cutters
– Enables use in restricted areas
thanks to the tool’s small diameter
The Mechanical Pipe Cutter tool operates on any wireline and requires minimal surface equipment.
O v e r v i e w
Mechanical Pipe Cutter ToolAchieve fast and effective pipe recovery
-
8/16/2019 33434 MPC Overview
2/2
Tool Specifications
Tool length
18.16 ft (5.54 m)
Two sections
8.33 ft (2.54 m)
9.83 ft (3 m)
Tool diameter
2 1/8-in. (54-mm) tool cuts 2 7/8-in. (73-mm) to 4-in. (102-mm) pipe
2 1/2-in. (64-mm) tool cuts 4-in. (102-mm) to 4 1/2-in. (114-mm) pipe
3 1/4-in. (83-mm) tool cuts 4-in. (102-mm) to 7-in. (178-mm) pipe
Rating
392°F (200°C) and 20,000 psi (1,379 bar)
Current pipe cutting sizes
2 7/8-in. (73-mm) to 7-in. (178-mm) pipe
Maximum wall thickness
0.5-in. (12.7-mm) - 2 1/8-in. (54-mm) tool
0.68-in. (17.3-mm) - 2 1/2-in. (64-mm) tool
0.75-in. (19.1-mm) - 3 1/4-in. (83-mm) tool
The cutting end of the MPC tool
The multiple, clean cuts provided by the MPC tool eliminate additional fish milling and ensure efficient pipe-recovery operations.
© 2011 Baker Hughes Incorporated. All rights reserved. 33434
www.bakerhughes.comDisclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates donot make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, includingthose of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is”and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BELIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.