contentspro.aqualor.com/pro/nourrisseurs/nourrisseurs-automatiqu... · 2019. 10. 1. · only use...
TRANSCRIPT
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
CONTENTS
FEEDERS AND SPREADERS ......................................... 3-11
ARVO-TEC T DRUM 2000 FEEDER ............................... 3
TD 2000 FEEDER ......................................................... 4
HOPPERS FOR FEEDERS .............................................. 5
STANDS, BRACKETS AND HANGERS ............................ 6
STANDS BRACKETS AND HANGERS ............................. 7
SPREADERS .................................................................. 8
SPREADERS .................................................................. 9
DOSING DRUMS ........................................................ 10
ACCESSORIES AND SPARE PARTS ................................. 12
FEEDER SPARES AND ACCESSORIES .......................... 12
FEEDER SPARES AND ACCESSORIES .......................... 13
ELECTRIC SPREADER SPARES AND ACCESSORIES…………………………………….……………14-16
PNEUMATIC SPREADER SPARES AND ACCESSORIES 17
ITEM LIST ...................................................................... 17
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
FEEDERS AND SPREADERS
ARVO-TEC T DRUM 2000 FEEDER
TECHNICAL SPECIFICATIONS
� 1, 6 or 10 litre transparent hopper
� 50, 150 or 600l white PE hopper
� Standard motor 24 VAC 11,3w 2 rpm
� Granule / pellet size 0,3-9mm
� Minimum dose of 0,1, 0,3, 1,5, 20, 45
or 100g
� Accuracy >98% in typical conditions
The Arvo-Tec T drum 2000 feeder has high
accuracy whilst remaining at a competitive
price.
TD 2000 is multifunctional making it
suitable for start feeding in hatcheries as
well as on-growing in tanks, ponds, etc.
Easy modification through a wide range of
accessories.
Robust motor sealed in water resistant
compartment and the stainless steel insert
make the TD 2000 low maintenance and
long lasting.
Dosing drum can be removed without
tools.
Stainless steel springs and scraper keep the
dosing drum clean.
TD 2000 mounts to Arvo-Tec white PE
hoppers without need for any tools.
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
NAME CODE ADDITIONAL INFO
TD 2000 24 VAC / 2rpm / 9
Cable extension to 2m
Dosing unit AISI 316 Stainless steel
insert
1010
1023
1024
� Standard motor 24 VAC
11,3w 2rpm
� Stainless steel Insert
� Cleaning springs and scraper
� Pin for drum
� 60 cm cable as standard
� Cable connectors not
included
� 1 rpm motor available as
option
� Upgrade for older feeders
TD 2000 FEEDER
ARVO-TEC FEEDERS Code Description Additional info. 1000 Dosing unit TD 2000/24 VAC/2rpm/6l/hanger/9 inc. 5l hopper + lid & td 2000 hinged hanger 1010 Dosing unit TD 2000/24 VAC/2rpm/9 1023 Feeder cable extension to 2m 1024 Dosing unit insert 0,5mm/9 automatically included with /9 feeder products
Note!
Older drums Ø 90,5 mm are not compatible with insert
Only use newer model/9 drums Ø 89,3 mm with insert
Note!
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
NAME CODE ADDITIONAL INFO
Acrylic Hoppers 1029 1 litre Cp. height: 7cm
1030 5 l height: 30 cm
1031 9 l height: 51cm
� Codes incude: hopper,
lid and plastic pins for
mounting to Feeder
White PE Hoppers 1033 50 l Actual size ~60 litres
1036 150 l
1034 600 l
1028
HOPPERS FOR FEEDERS
ARVO-TEC HOPPERS Code Description Additional info. 1029 Hopper Acrylic 1l Includes lid, hopper and pins 1030 Hopper Acrylic 5l Includes lid, hopper and pins 1031 Hopper Acrylic 9l Includes lid, hopper and pins 1033 Hopper White PE 50l lid and hopper 1034 Hopper White PE 600l lid and hopper 1036 Hopper White PE 150l lid and hopper 1028 Rubber strap for 50 & 150l hoppers Rubber fastener & hooks for demanding conditions
For conversion 1litre = 0,68kg feed
� Codes include: hopper and lid
� Screws straight onto feeder
� RX 101 NATURAL polyethylene
Resin
� Rubber straps available for
securing lid in windy conditions
Rubber strap for 50-150l hoppers
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
NAME CODE ADDITIONAL INFO
Stand to lid 1046
Bail hanger
1048
TD 2000 Simple hanger 1049
TD 2000 Hinged Hanger 1050
STANDS, BRACKETS AND HANGERS
� AISI 316 Stainless steel
� For 1—9 litre acrylic hoppers
� Designed to be mounted onto acrylic
hoppers
� AISI 316 Stainless steel
� AISI 316 Stainless steel
� Easy to adjust and lock in place
� Includes nuts and bolts
� AISI 316 Stainless steel
� Extension arm available
� Flipping feature makes emptying and
servicing feeder fast & easy
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
NAME CODE ADDITIONAL INFO
AISI 316 Stainless Steel Stand for
650l hopper
Stand for 50 & 150l hoppers
1053
STANDS BRACKETS AND HANGERS
STANDS, BRACKETS AND HANGERS Code Description Additional info. 1046 Stand to lid 1047 1m Extension arm for hinged hanger 1048 Bail hanger For acrylic hopper only 1049 TD 2000 Simple hanger 1050 TD 2000 Hinged hanger 1053 AISI 316 Stainless Steel Stand for 600l hopper Assembly required 1054 Yellow Passivated Stand for 50 & 150l hoppers Adjustable height 150 - 250 cm
� AISI 316 Stainless steel
� Adjustable height
150 – 250cm
� Yellow passivated steel fo
high corrosion resistance
� Custom sizes available
1054
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
HD – Heavy Duty electric spreader The LD and HD Electric Spreaders are designed to
be mounted directly to TD 2000 Feeders for ideal
pellet distribution.
The electrical spreaders remain quiet even while operating at maximum capacity and at high speed.
HD is a powerful spreader that meets the needs for higher volumes and continuous feeding.
Both HD and LD spreaders come supplied with 2 short and 1 long adjustable Vector Shields for adjusting the feeding zone from approximately 120° up to 360° making the spreader ideal for most locations.
Both LD and HD spreaders include a stepless speed controller for accurate control.
Up to 10m diameter feeding.
LD – Light Duty electric spreader Robust AISI 316 stainless steel body. New models feature new motor and transmission with improved materials and better sealing to meet the demands of corrosive environments, expanding the life of the spreaders considerably.
Codes include fastening pins for easy mounting to feeders plus necessary nuts and bolts. LD & HD spreaders come with speed control box. Both HD and LD come with one pair of ABS connectors as standard.
Recommended granule/pellet sizes:
LD Up to 5mm Ø HD Up to 8mm Ø Disc diameter LD 200 mm Ø Disc diameter HD 300 mm Ø
SPREADERS
*New model* 2016 1084
*New model* 2016 1086
Both LD & HD spreaders’ speed controller comes encased in IP65 rated box
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
TD 2000 Pneumatic spreader 1081 The TD 2000 offers a more gentle approach
by using a controlled burst of compressed air
to deliver pellets with no damage to the feed
itself up to 7 metres.
The pneumatic spreader can be equipped
with a dose divider for wider distribution
pattern. Recommended to be used in tanks
where the drain is located in the centre to
minimize wasted feed.
Recommended operating pressure 2-4 bar.
Notice that spreader gets louder as the
operating pressure gets higher. Max 8 bar.
Max 180g feed delivered per burst.
AISI 316 stainless steel chassis and tank.
8 mm Ø Outer diameter PU/PA tubing
Dose Divider 1079 24 VAC
Code includes TD 2000 pneumatic spreader
with junction box, solenoid valve and 1,5l
tank
SPREADERS
SPREADERS Code Description Additional info. 1084 Electric spreader HD 1086 Electric spreader LD 1081 Pneumatic spreader inc. Junction box, solenoid valve and 1,5l tank 1079 Dose Divider
JUNCTION BOX WITH
SOLENOID VALVE
PNEUMATIC SPREADER REQUIRES ADVANCED TIMER CONTROL TO
FUNCTION PROPERLY. USING WOLF-CONTROLLER IS HIGHLY RECOMMENDED
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
0,3g / 24 cups 1g / 24 cups 5g / 12 cups
1060 1061 1062
20g / 8 cups 45g / 4 cups 100g / 4 cups 1063 1064 1065
0,1g / 24 cups 0,3g / 96 cups 1059 1067
DOSING DRUMS
Special drum for 10< mm feed / 4 cups 1068
Arvo-Tec Oy Ruukintie 45 FI-79620 Huutokoski, Finland / Tel. +358 20 729 9910 [email protected] / www.arvotec.fi
0,1 0,6 g/s 0,0 0,3 g/s4,8 36,0 g/min 2,4 18,0 g/min0,3 2,2 kg/h 0,1 1,1 kg/h0,2 1,8 g/s 0,1 0,9 g/s
14,4 108,0 g/min 7,2 54,0 g/min0,9 6,5 kg/h 0,4 3,2 kg/h0,8 6,0 g/s 0,4 3,0 g/s
48,0 360,0 g/min 24,0 180,0 g/min2,9 21,6 kg/h 1,4 10,8 kg/h2,0 15,0 g/s 1,0 7,5 g/s
120,0 900,0 g/min 60,0 450,0 g/min7,2 54,0 kg/h 3,6 27,0 kg/h5,3 40,0 g/s 2,7 20,0 g/s
320,0 2400,0 g/min 160,0 1200,0 g/min19,2 144,0 kg/h 9,6 72,0 kg/h6,0 45,0 g/s 3,0 22,5 g/s
360,0 2700,0 g/min 180,0 1350,0 g/min21,6 162,0 kg/h 10,8 81,0 kg/h13,3 100,0 g/s 6,7 50,0 g/s800,0 6000,0 g/min 400,0 3000,0 g/min48,0 360,0 kg/h 24,0 180,0 kg/h1,0 7,2 g/s 0,5 3,6 g/s
57,6 432,0 g/min 28,8 216,0 g/min3,5 25,9 kg/h 1,7 13,0 kg/h
13,3 100,0 g/s 6,7 50,0 g/s800,0 6000,0 g/min 400,0 3000,0 g/min48,0 360,0 kg/h 24,0 180,0 kg/h
2 rpm
TD 2000
15 rpm Robot
Unit
Arvo-Tec technical documentDosing capacity with different drum and motor options
Maximum Theoretical dosing capacity
Motor running 100% of the time
Normal situation feeding capacity
Motor running 50% of the time
Actual capacity is feed pedenpent! Always calibrate feeders!
** With Arvo-Tec feed mixer (1027)
Without mixer recommended min. feed size 0,3mm
2 rpm TD 2000
15 rpm Robot
Unit
1
100 4 1 9
1
120 8 6
45 4 8
1 24 0,1** 2
5 12 41
Max. Feed size mm
0,3 24 0,1** 1
0,1 24 0,1**
Cup size = Minimum dose
g
Cups /
Drum
Min. feed size mm
POM 0,3 96 0,1** 1
SPECIAL 4 9 12