vmware.actualtests.vcp550d.v2015-03-06.by.joseph · 2015. 3. 6. · question 7 an administrator is...

Actualtests.VCP550D.392.Questions

Number: VCP550DPassing Score: 800Time Limit: 120 minFile Version: 17.9

http://www.gratisexam.com/

VCP550D

VMware Certified Professional 5 - Data Center Virtualization Delta Exam

There are old questions as well in this vce but it covers the whole pool in the testing center. Hurry up friends if want to join the certified group. This file is still 100%accurate.

Exam A

QUESTION 1An administrator is planning a vSphere infrastructure with the following specific networking requirements:

· The ability to shape inbound (RX) traffic· Support for Private VLANs (PVLANs)· Support for LLDP (Link Layer Discovery Protocol)

What is the minimum vSphere Edition that will support these requirements?

A. vSphere Essentials PlusB. vSphere StandardC. vSphere EnterpriseD. vSphere Enterprise Plus

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)

A. NetworksB. ApplicationsC. StorageD. Management

Correct Answer: ACSection: (none)Explanation


QUESTION 3An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the

installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should theadministrator analyze to determine the cause of the failure? (Choose two.)

A. Server\utils\logs\imsTrace.logB. Server\utils\logs\install.txtC. %TEMP%\utils\logs\vminst.logD. %TEMP%\vminst.log

Correct Answer: ADSection: (none)Explanation


QUESTION 4Which Single Sign-On deployment mode should an administrator use for two 5.x vCenter Servers configured with linked mode?

A. Basic Single Sign-On with vCenter Server HeartbeatB. Multisite Single Sign-OnC. Basic Single Sign-OnD. Single Sign-On with Linked Mode

Correct Answer: BSection: (none)Explanation


QUESTION 5-- Exhibit --


-- Exhibit --

Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two.)

The physical CPUs in the host do not support hyperthreading.

A. Hyperthreading is disabled in the host's BIOS.B. The physical CPUs in the host are not multi-core.C. The number of CPUs meets or exceeds the maximum without hyperthreading.

Correct Answer: ABSection: (none)Explanation


QUESTION 6Immediately after installing an ESXi host, an administrator needs to examine the following log files:· /var/log/hostd.log· /var/log/vmkernel.log· /var/log/vpxa.logWhich two connections would allow an administrator to examine these files? (Choose two.)

A. Connecting to the Direct Console User InterfaceB. Attaching a vSphere Client directly to the ESXi hostC. Attaching the vSphere Web Client directly to the ESXi hostD. Attaching the vSphere Client to the vCenter Server managing the ESXi host



QUESTION 7An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 5.0 and the administrator wants to upgrade to the latest version possible.The environment contains several ESXi 5.1 hosts.Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two.)

A. Upgrade the vSphere Distributed Switch to 5.5B. Upgrade the ESXi 5.1 hosts to version 5.5, then upgrade the vSphere Distributed Switch to 5.5C. Upgrade the vSphere Distributed Switch to 5.1D. Upgrade the ESXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5

Correct Answer: BCSection: (none)Explanation


QUESTION 8

To avoid unnecessary planned downtime, what is the minimum version of VMware Tools that, if installed, will decrease the need for virtual machine rebootsfollowing VMware Tools upgrades?

A. 5.5B. 5.1C. 5.0D. 4.1



QUESTION 9Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)

A. LocalOSB. OpenLDAPC. NIS as an LDAP ServerD. VCMSDS



QUESTION 10Which VLAN configuration requires switch connectivity defined as an access port?

A. Private VLANB. External Switch TaggingC. Virtual Guest TaggingD. Virtual Switch Tagging

Correct Answer: B

Section: (none)Explanation


QUESTION 11An administrator needs to deploy several virtual machines. Storage contention between the virtual machines should be managed by the VMkernel. Some of thevirtual machines will use MSCS and should be highly available across the ESXi 5.5 hosts.

Which two storage options meet these requirements? (Choose two.)

A. iSCSIB. NFSC. Fibre ChannelD. vSAN



QUESTION 12Which two precautions should a vSphere administrator take before increasing the size of a VMFS datastore? (Choose two.)

A. Unmount the datastoreB. Perform a rescan to ensure that all hosts see the most current storageC. Quiesce I/O on all disks involvedD. Shut down all virtual machines stored in the datastore




-- Exhibit --

What action should the vSphere administrator take to allow for a new vApp to be created in the cluster?

A. Enable Distributed Resource Scheduling on the clusterB. Create a Resource Pool in the cluster, and create the vApp in the Resource PoolC. Enable High Availability on the clusterD. Create a new Datacenter, and create the vApp in the new Datacenter

Correct Answer: ASection: (none)Explanation



-- Exhibit --

A vSphere administrator receives a report of an issue with a vApp. After connecting to the environment with the vSphere Client, the administrator does not see thevApp, but instead sees the inventory shown in the exhibit.

What explains this behavior?

A. The administrator is connected to the ESXi host running the vApp.B. The administrator is using the Web Client.C. The vApp is in a partially deleted state.D. The vApp has been converted to a resource pool.



QUESTION 15A system administrator is unable to clone a windows 2008 server while connected directly to an ESXi host through vSphere Client.

Which two methods can be used to complete the task? (Choose two.)

A. Connect to vCenter Server and retry the operation.B. Use VMware Converter to perform the operation.C. Connect to the host using the Web Client and retry the operation.D. Use VMware Configuration Manager to perform the operation.



QUESTION 16An administrator needs to create and provision new virtual machines from a master image that can not be edited or powered on.

Which type of resource is most appropriate for the administrator to perform the task?

A. Full CloneB. Linked CloneC. TemplateD. Snapshot

Correct Answer: CSection: (none)Explanation


QUESTION 17A vSphere administrator is unable to vMotion a virtual machine between two hosts. An error message indicates that the USB device is not accessible on the targethost.What is causing this issue?


A. The USB device was not enabled for vMotion when it was added to the virtual machine.B. ESXi does not support vMotion with a USB device attached to the virtual machine.C. The VMkernel port for vMotion is not enabled for USB traffic.D. The virtual machine has the wrong USB controller installed.



QUESTION 18

A vSphere administrator needs to configure a virtual machine to meet a guaranteed CPU performance profile.Which configuration setting could the administrator choose?

A. Set the CPU Limit to HighB. Set the CPU Shares to 500MHzC. Set the CPU Guarantee to HighD. Set the CPU Reservation to 500MHz



QUESTION 19An organization's datastores are configured in a fully automated Storage Distributed Resource Scheduler (SDRS) cluster. The vSphere administrator determinesthat virtual machines are being migrated between datastores even though the datastores look evenly balanced. On further investigation, the administratordetermines that the datastore's utilization percentages differ by 2%.

Which Storage DRS setting should the administrator change to prevent the virtual machines from migrating prematurely?

A. Edit the Storage DRS cluster settings to increase the percentage of the Space Utilization Difference thresholdB. Edit the Storage DRS cluster settings to increase the percentage of the I/O imbalance thresholdC. Edit the Storage DRS cluster settings to increase the size of the Space Utilization Difference thresholdD. Edit the Storage DRS cluster settings to increase the size of the I/O imbalance threshold



QUESTION 20A vSphere administrator enables Fault Tolerance on a powered off virtual machine that has the following configuration:· The virtual machine's single thin provisioned virtual disk is sized at 100GB. · The datastore that houses the virtual machine has 120GB of free space.

After Fault Tolerance has been configured, another administrator attempts to use Enhanced vMotion to move a 30GB virtual machine file into the same datastoreand receives an error.

What condition could cause this behavior?

A. Fault Tolerance inflated the virtual machine's virtual disk file.B. Fault Tolerance created a temporary logging file on the same datastore.C. Fault Tolerance created a secondary copy of the virtual machine's virtual disk file.D. The Fault Tolerance logging file ran out of disk space.



QUESTION 21While testing a Fault Tolerance setup on a virtual machine, a system administrator notices that the DRS automation level of the virtual machine has beenautomatically set to Disabled. The administrator needs to enable DRS to migrate the Fault Tolerance virtual machine to balance the cluster's CPU and memoryloads.What should the administrator do?

A. Enable Enhanced vMotion Compatibility (EVC) in the vSphere cluster.B. Move the virtual machine to a VMFS 5 datastore built on shared storage.C. Manually change the DRS automation level of the virtual machine to Enabled.D. Move the secondary virtual machine to a host with a Fault Tolerance VMkernel port.




-- Exhibit --

A vSphere administrator has misconfigured vMotion in such a way that vMotion migrations are failing.

Based on the information shown, what is the cause of the problem?

A. The vMotion VMkernel ports on the hosts are configured with the same IP address.B. The labels of the vMotion VMkernel ports are not identical.C. The vMotion VMkernel ports are not labeled identically.D. The vMotion VMkernel ports are using the same uplink.



QUESTION 23A system administrator detects that a VDP Appliance that has been operational for 6 months has become inconsistent or unstable.Which action should the administrator take to recover the VDP appliance and what will be the impact on the vSphere environment?

A. Perform a VDP rollback to the most recent validated checkpoint. All backup and configuration changes made after the checkpoint will be lost.

B. Perform a VDP rollback to the most recent validated checkpoint. Configuration changes after the checkpoint will be lost, but backup data will remain intact.C. Restore a copy of the latest backup of the VDP appliance. All backup data and configuration changes after the backup was made will be lost.D. Restore a copy of the latest backup of the VDP appliance. All configuration changes after the backup was made will be lost, but backup data will remain intact.



QUESTION 24Which two features are different between VDP and VDPA? (Choose two.)

A. Support for guest level backups of SQL and ExchangeB. Ability to perform file level recoveryC. Virtual machines supported per applianceD. Support for image level backups



QUESTION 25An administrator must determine which Update Manager procedures can be performed using the vSphere Web Client, and which must be completed using theWindows vSphere client. Which two tasks require the use of the Windows vSphere client? (Choose two.)

A. Attach and detach baselines to inventory objectsB. Scan inventory objects for complianceC. Create a baseline for an inventory objectD. Stage a baseline for remediation

Correct Answer: CDSection: (none)Explanation


QUESTION 26A vSphere administrator needs to use vSphere Update Manager to perform orchestrated upgrades of virtual machines.Which two options are available for virtual machine remediation? (Choose two.)

A. Upgrade virtual machine hardwareB. Upgrade VMware toolsC. Upgrade virtual machine appliancesD. Upgrade virtual machine guest OS



QUESTION 27Which two are supported object types for Update Manager? (Choose two.)

A. virtual appliancesB. templatesC. vAppsD. hosts



QUESTION 28A vSphere administrator needs a way of sending noncritical ESXi events to a remote server. Due to budget constraints, no additional costs should be incurred.Which tool will best meet this requirement?

A. vSphere Syslog Collector

B. vSphere ESXi Dump CollectorC. vSphere vCenter Log InsightD. vSphere Management Appliance




-- Exhibit --

An administrator determines that traffic shaping does not appear to be working on Production, a virtual machine port group on vSwitch1. Traffic shaping is workingon all other port groups on the switch.The administrator examines the Traffic Shaping settings as shown in the exhibit:

What should the administrator do to resolve the problem?

A. Select the Status checkbox to enable Traffic Shaping on the portgroup.B. Reduce the Average Bandwidth to 50% of the Peak Bandwidth.C. Reduce the Burst Size to 50% of the Peak Bandwidth.D. Click the Security tab and create the necessary security exception.




-- Exhibit --

The vSphere administrator needs to remove the Production virtual machine port group from an ESXi host. The ESXi host's Networking Configuration tab is shownin the exhibit.

After disconnecting the Fileserver02 VM, what step does the administrator need to take, assuming that vSwitch1 will still be needed for further configuration?

A. Remove the Production port group by accessing the properties for the port group.B. Remove the Production port group by accessing the properties for vSwitch1.C. Remove the Production port group by accessing the properties for the Network.D. Remove the Production port group by removing vSwitch1.

Correct Answer: BSection: (none)

Explanation


QUESTION 31An administrator determines that when a host residing in a High Availability (HA) cluster fails, the virtual machines fail to restart on a remaining host, or will onlyrestart after a long delay. Which two conditions would account for this behavior? (Choose two.)

A. The virtual machines were not protected by vSphere HA at the time the failure occurred.B. Distributed Resource Scheduler was not enabled at the time the failure occurred.C. There is insufficient spare capacity on hosts with which the virtual machines are compatible.D. The virtual machines contain physical Raw Device Mappings.




-- Exhibit --

What is portrayed in the performance chart?

A. The ESXi host running the VM has Transparent Page Sharing enabled.B. The virtual machine's memory share value is set too high.C. The virtual machine is memory constrained.D. The ESXi host running the VM is low on memory.



QUESTION 33A vSphere administrator can create an alarm on which two objects? (Choose two.)

A. LUNB. DatastoreC. TemplateD. Folder

Correct Answer: BDSection: (none)Explanation


QUESTION 34An administrator needs to modify a virtual machine alert to increase the threshold value of the trigger. Once connected to the vCenter Server, the administratornavigates to the virtual machine to make the change. However, the administrator is unable to edit the alarm. What is the reason that this alarm cannot be edited?

A. The alarm was not defined on this inventory object.B. The administrator is not the owner of this inventory object.C. The alarm was not created by the administrator.D. The alarm has not been acknowledged.



QUESTION 35An administrator using vCenter Operations Manager is viewing the health of an ESXi host in the environment. There have NOT been any reported outages orissues with the ESXi host, but the administrator needs to determine if the host is behaving normally. Which minor badge should the administrator investigate todetermine this information?

A. FaultsB. AnomaliesC. StressD. Health

Correct Answer: B



QUESTION 36Which minor badge scores are used to calculate the Health score in vCenter Operations Manager?

A. Time remaining, Capacity remaining, StressB. Workload, Anomalies, FaultsC. Stress, Faults, RiskD. Reclaimable Waste, Density



QUESTION 37A small company wants to use VMware products for its production systems. The system administrator needs to recommend a solution that will deliver HighAvailability to the company's production applications.

What is minimum vSphere offering that will support this requirement?

A. vSphere EssentialsB. vSphere Essentials PlusC. vSphere HypervisorD. vSphere Standard



QUESTION 38A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least softwarecost?

A. vSphere HypervisorB. vSphere EssentialsC. VMware PlayerD. VMware Workstation



QUESTION 39An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the clientearlier the same day. What is the most appropriate first step the administrator should take to resolve this issue?

A. Verify the web browser being used has Adobe Flash plugin version 11.5 or laterB. Verify the vCenter Single Sign-On service is running on the vCenter ServerC. Verify the vSphere Web Server service is running on the vCenter ServerD. Verify the administrator has permissions configured in vCenter Server



QUESTION 40What is a valid plug-in status for a plug-in that has been added to a vSphere client?

A. DisabledB. UnknownC. StoppedD. Installed



QUESTION 41An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the followingrequirements:· A web browser will be utilized to manage the vSphere environment.· 16 ESXi hosts will be deployed.· Licenses must be shared with a vCenter Server at another site. · An external Oracle 10g database server will be used to host the vCenter Server database.

Why will the administrator need to deploy vCenter Server on a Windows server?

A. Linked Mode is a requirement for the solution.B. Oracle 10g is a requirement for the solution.C. The vSphere web client is a requirement for the solution.D. Management of more than 5 hosts is a requirement for the solution.



QUESTION 42Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI).What is the most likely explanation?

A. The host has not yet been added to a vCenter Server.B. The BIOS on the host does not have NX/XD enabled.C. The ESXi host is running in evaluation mode.D. The host requires a reboot before this feature is available.

Correct Answer: ASection: (none)

Explanation


QUESTION 43An administrator is installing ESXi on several hosts attached to iSCSI storage.


Why would the administrator detach the host from the IP storage network prior to installation?

A. It decreases the time the installer needs to search for available disk drives.B. It allows the installation of a generic VAAI component for IP storage.C. It prevents ESXi from installing vSphere Flash Cache to the IP storage.D. It is required when installing ESXi onto a physical server that utilizes IP storage.



QUESTION 44During the installation of ESXi 5.5, the following error message is reported:

Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS.

Which condition would generate this message?

A. LAHF/SAHF is not enabled in the BIOS.B. NX/XD is not enabled in the BIOS.C. SSE3 is not enabled in the BIOS.

D. Hyperthreading is not enabled in the BIOS.



QUESTION 45What is the minimum virtual machine compatibility setting required for a virtual machine to run on a vSphere 5.5 host?

A. ESXi 5.1 and laterB. ESXi 3.0 and laterC. ESXi 4.1 and laterD. ESXi 3.5 and later



QUESTION 46Which is the simplest baseline group combination an administrator could create to upgrade hosts, VMware tools, and virtual machine hardware to the latestversions using Update Manager?

A. One baseline group that contains the host upgrade baselines and one baseline group that contains the VM Hardware and VMware Tools upgrade baselinesB. One baseline group that contains the host upgrade and vCenter upgrade baselinesC. One baseline group that contains the host, VMware tools, and VM Hardware upgrade baselinesD. One baseline group that contains the Data Center upgrade baseline and one baseline group that contains the VM upgrade baseline



QUESTION 47During an upgrade, the ESXi 5.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. Therequirement is to upgrade to VMFS5.Which option should be chosen to meet this requirement?

A. Upgrade ESXi and preserve the VMFS datastoreB. Install ESXi and preserve the VMFS datastoreC. Install ESXi and overwrite the VMFS datastoreD. Upgrade ESXi and overwrite the VMFS datastore



QUESTION 48What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?

A. Users remain logged in and can run commands, except to disable lockdown mode.B. Users remain logged in and can run commands, including disabling lockdown mode.C. Users are immediately logged out of ESXi Shell.D. Users are logged out after a timeout specified by the vSphere administrator.



QUESTION 49The vSphere administrator attempts to connect to an ESXi host via an SSH client and receives the following security alert:

-- Exhibit --

-- Exhibit --

The vSphere administrator needs to determine whether the RSA key fingerprint shown in the security alert is the fingerprint of the intended ESXi host.Which tool should the vSphere administrator use?

A. Direct Console User InterfaceB. vSphere ClientC. vSphere Web ClientD. vSphere Management Assistant



QUESTION 50The vSphere administrator is configuring directory services for an ESXi host:

-- Exhibit --

-- Exhibit --What should the vSphere administrator do to configure the host to use CAM services?

A. Check the Use vSphere Authentication Proxy checkbox.B. Set Select Directory Service Type to CAM services.C. Specify CAM$ for the Domain.D. Set Trusted Domains to cam\name.tld where name.tld is the domain that the host is joining.


Explanation


QUESTION 51A vSphere Standard Switch is configured with two uplinks.

When adjusting the failover order of the uplinks, what are two valid states in which an administrator can place the uplinks? (Choose two.)

A. ActiveB. UnusedC. PassiveD. Disabled



QUESTION 52An administrator determines that a vSphere Standard Switch is dropping all inbound frames to a specific virtual machine. The behavior appeared in the last twodays. Which configuration setting, if changed during this timeframe, would result in this behavior?

A. MAC address changesB. Forged TransmitC. Traffic ShapingD. Jumbo Frames



QUESTION 53Which two network settings are available on a vSphere Standard Switch? (Choose two.)

A. Ingress traffic shapingB. Egress traffic shapingC. Private Virtual Local Area Networks (PVLAN)D. Virtual Local Area Networks (VLAN)



QUESTION 54A security team is validating policy settings in a vSphere environment. By default, which security policy is set to reject on a vSphere Standard Switch?

A. Promiscuous modeB. MAC address changesC. Forged transmitD. Use explicit failover



QUESTION 55A vSphere administrator upgrades a version 5.1.0 vSphere Distributed Switch to version 5.5.0. Another vSphere administrator, unaware of this change, tries to addan ESXi version 5.1.0 host to the switch and fails.What is causing this addition of the ESXi host to fail?

A. The upgraded switch supports version 5.5 ESXi hosts only.B. The upgraded switch must be set up for backwards compatibility.C. The switch failed to upgrade properly.D. A version 5.5 ESXi host must be added to the switch before the 5.1 host.

Correct Answer: A



QUESTION 56A vSphere administrator creates a new vSphere Distributed Switch. The administrator receives notice from the service desk that a cluster of vSphere hosts hasdisconnected from vCenter Server. This disconnect occurred immediately after the new switch was created. · This vSphere Distributed Switch is the only distributedswitch managed by vCenter. · The virtual machines are still functional and the applications are still accessible by end users. On the ESXi hosts, which step mustthe vSphere administrator take to allow vCenter Server to reconnect?

A. Use the Direct Console User Interface to reattach the management vmnic to the appropriate switchB. Use the Direct Console User Interface to disable lockdown mode on each affected hostC. Use the ESXi Shell to restart the mgmt-vmware service on each affected hostD. Use the ESXi Shell to restart the vSphere Web Client service on each affected host



QUESTION 57A vSphere administrator is administering a vSphere Distributed Switch port group using the vSphere Web Client. The port group was configured using Staticbinding, but the number of ports must increase as virtual machines are added to the port group. Which port allocation setting should the administrator use toachieve this goal?

A. ElasticB. DynamicC. FixedD. Manual



QUESTION 58An administrator is deploying vSphere 5.5. The administrator creates a vSphere Distributed Switch, then uses Auto Deploy to deploy several ESXi hosts. After thehosts are deployed, the administrator notices that LACP packets are not being sent between them.Which condition would cause this issue to occur?

A. The LACP support settings do not exist in the Host Profile.B. The LACP installation bundle is not included in the Image Profile.C. The LACP setting is not enabled on vCenter Server.D. LACP has not been configured on the Auto Deploy server.



QUESTION 59A virtual machine is receiving a large number of network packets, which is affecting the performance of other virtual machines connected to the same virtualnetwork. What should the vSphere administrator do to resolve the issue?

A. Migrate the virtual machine to a standard switch that has been configured for ingress traffic shapingB. Configure the distributed switch to which the virtual machine is connected for ingress traffic shapingC. Migrate the virtual machine to a different port group on the same distributed switchD. Enable Network I/O Control on the standard switch to which the virtual machine is connected



QUESTION 60A virtual machine is unable to communicate with another virtual machine. Both virtual machines are connected to the Production port group on the same virtualswitch and are running on the same host.

Which configuration is causing the inability of the virtual machines to communicate?

A. LLDP was enabled instead of CDP for the vSphere Distributed Switch.B. Promiscuous Mode has been set to Allow on the Production port group.C. The Production port group is configured to use a secondary PVLAN.D. The speed and duplex settings for the virtual machine vmnics do not match.



QUESTION 61Which two statements are true regarding a new vSphere deployment that is using software FCoE boot from SAN? (Choose two.)

A. Multi-pathing options must be configured by the vmkernel after boot.B. The adapter must support iBFT or UEFI.C. The adapter must support FBFT or FBPT.D. Multi-pathing options must be configured in the Boot ROM.



QUESTION 62Which feature requires an administrator to configure an RDM with Virtual Compatibility Mode?

A. vMotionB. Virtual Machine SnapshotsC. High AvailabilityD. N-port ID Virtualization



QUESTION 63A virtual machine has the following configuration:· Thin provisioned virtual disks· The VMFS datastore on which it resides is on a thin provisioned LUN.· The storage array is VAAI-enabled.

What is the behavior of the virtual machine when it encounters an out-of-space condition?

A. It is suspended.B. It is gracefully shut down.C. It is powered off.D. It is converted to space-efficient sparse.



QUESTION 64What should an administrator do to configure multi-pathing using software iSCSI?

A. Bind the VMkernel ports to the software iSCSI initiatorB. Configure Zoning between the hosts and SAN switchesC. Configure NIC teaming on the associated uplinksD. Ensure jumbo frames are enabled end-to-end



QUESTION 65

A vSphere administrator observes a problem with the Virtual SAN Cluster Setting as shown:-- Exhibit --

-- Exhibit --

Which action should the administrator take on the vmkernel portgroup on all hosts used by Virtual SAN cluster to resolve this problem?

A. Select the Virtual SAN traffic optionB. Increase the MTU valueC. Change the DNS server addressD. Increase the Port Speed



QUESTION 66Which statement is true about the hardware configuration for ESXi hosts participating in a virtual SAN?

A. The hosts must have identical hardware.B. Each host must have at least one Solid State Drive (SSD).C. The hosts must have network attached storage.D. Each host must have a RAID Controller.



QUESTION 67An administrator has configured a vSphere 5.5 test environment to evaluate the Virtual SAN feature using Automatic Mode Disk Groups. The administrator needsto disable the Virtual SAN cluster while preserving the virtual machines running on that cluster. The administrator has already installed a vSphere 5.5 Client on aWindows 7 desktop and also has access to the vSphere 5.5 Web Client.What should the administrator do to disable the Virtual SAN?

A. Use Storage vMotion to migrate the virtual machines to another datastore then use the vSphere 5.5 Client to disable the Virtual SAN.B. Use Storage vMotion to migrate the virtual machines to another datastore then use the vSphere 5.5 Web Client to disable the Virtual SAN.C. Use the vSphere 5.5 Client to disable the Virtual SAN, which will automatically migrate the virtual machines via the Storage DRS feature.D. Use the vSphere 5.5 Web Client to disable the Virtual SAN, which will automatically migrate the virtual machines via the Storage DRS feature.



QUESTION 68A vSphere administrator has created a Virtual SAN Cluster with Automatic Mode Disk Groups. The cluster includes three ESXi hosts contributing one SSD and sixSAS disks each. The administrator has four new ESXi hosts that boot from a fiber channel array and have no local disks attached. These four new hosts needadditional shared storage but there is insufficient space on the fiber channel array. The hardware budget is limited. What can the administrator do to provide theneeded storage for the lowest cost?

A. Add the four new hosts to the Virtual SAN Cluster and use the existing storage in the cluster.B. Add an SAS RAID controller to each of the new hosts. Attach one SSD and six SAS disks to each RAID controller and then add the four hosts to the Virtual

SAN cluster.C. Add the four new hosts to the Virtual SAN Cluster and contribute the fiber channel disks to the Virtual SAN.D. Add the four new hosts to the Virtual SAN Cluster and change to Manual Mode Disk Groups.



QUESTION 69A customer needs a datastore to be seen across multiple vSphere clusters with applications inside of the virtual machines that must detect the physicalcharacteristics of the storage device. Which type of virtual disk meets this requirement?


A. A virtual disk on a VMFS datastore

B. A raw device mapped disk in virtual compatibility modeC. A raw device mapped disk in physical compatibility modeD. A virtual disk on an NFS datastore



QUESTION 70The current block size of a datastore in VMFS3 is 4MB. An administrator needs to upgrade the datastore to VMFS5 and wants to change it to 1MB block size.

Which action should the administrator take?

A. Upgrade the datastore to VMFS 5. Select the 1MB block size option during the upgrade.B. Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore, then delete the VMFS3

datastore.C. Upgrade the datastore to VMFS5. Use vmkfstools to change the block size on the upgraded datastore.D. Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore. Upgrade the virtual

machine hardware on the migrated VMs, then delete the VMFS3 datastore.



QUESTION 71An administrator needs to use guest OS clustering in a vSphere environment that uses a Fibre Channel SAN. The clustering software does NOT have a SCSItarget or a SCSI command pass- through requirement.Which VMware storage type should the administrator use?

A. Physical RDMB. VMFSC. Virtual RDMD. NFS



QUESTION 72Which two CPU features enable the use of 64-bit virtual machines? (Choose two.)

A. Intel VTB. NX/XD BitC. Hyper-threadingD. AMD RVI



QUESTION 73An administrator is creating a new VMFS volume and needs to make it available to all hosts within a datacenter using the Web Client.What should the administrator scan for in order to meet this requirement?

A. New Storage Devices and LUNsB. New Storage Devices and VMFS VolumesC. New VMFS Volumes and DatastoresD. New VMFS Volumes and LUNs



QUESTION 74An administrator is deploying a virtual machine from a template.

Assuming all of the inventory objects below exist in the implementation, what is the highest level in the vCenter Server hierarchy to which a virtual machine can bedeployed?

A. DatacenterB. ClusterC. Resource PoolD. Host



QUESTION 75Which statement is accurate when choosing the storage controller for a virtual machine using the Create New Virtual Machine wizard in custom mode?

A. There is a predetermined controller based on the guest OS, which cannot be changed.B. A controller is recommended based on the guest OS type. The administrator can choose this controller or select any other.C. There is a predetermined controller based on the guest OS, which can only be changed after the virtual machine is deployed.D. The controller options presented will be based on the guest OS type. The administrator must choose one of these options.



QUESTION 76A VMware administrator needs to simplify the placement of virtual machines. The administrator also needs to balance I/O load and space utilization automatically.

Which combination of features should the administrator use to achieve this?

A. Create a Datastore Cluster and enable Storage DRS on the cluster

B. Create a Datastore Cluster and enable Storage I/O Control on each datastoreC. Enable Storage DRS and Storage I/O Control on each datastoreD. Enable Storage I/O Control on each datastore and configure Storage vMotion



QUESTION 77An administrator is creating a vApp for a multi-tiered application and needs to configure custom startup actions for each virtual machine.What should the administrator do to enable this functionality?

A. Verify that VMware Tools is installed on each virtual machine in the vApp.B. Ensure all virtual machines in the vApp are running hardware version 8 or later.C. Configure custom startup actions on the virtual machines, then add them to the vApp.D. Deploy a vSphere Management Assistant in the cluster and enable the vApp plug-in.



QUESTION 78A vSphere administrator is creating a vApp for a multi-tier application. Every time the vApp is started, the virtual machines perform a file system check. Whichaction should the administrator take to resolve this issue?

A. Change the shutdown action in the vApp to Guest ShutdownB. Change the shutdown action in the vApp to Graceful ShutdownC. Change the shutdown action in the vApp to Graceful Power OffD. Change the shutdown action in the vApp to Guest Power Off



QUESTION 79An administrator needs to configure a Linux virtual machine template to support guest customization. The administrator has installed VMware Tools.

Which additional component is necessary to enable Linux guest OS customization?

A. PerlB. bashC. PythonD. Sysprep



QUESTION 80A VMware administrator needs to export a vApp and create a self-contained package that has a single file.

Which format should the administrator use?

A. Export as OVFB. Export as OVAC. Export as ZIPD. Export as ISO



QUESTION 81A vSphere administrator needs the ability to adjust the amount of guaranteed physical CPU and Memory resources to a virtual machine without incurring application

downtime.Which actions must the administrator perform?

A. Enable CPU hotplug and Memory hotplug on the virtual machine.B. Adjust the number of CPUs and the Memory Configuration for the virtual machine.C. Adjust the CPU reservation slider and click the Reserve all Guest Memory checkbox.D. Adjust the CPU and Memory reservation sliders on the virtual machine.



QUESTION 82A system administrator has an application installed on a physical machine that is licensed to the MAC address of the physical NIC. This system needs to bevirtualized.

What two methods could an administrator use to ensure the license will function in the virtual machine? (Choose two.)

A. Manually set the MAC address for the vNIC in the guest OSB. Install the NIC from the physical server into the ESXi hostC. Manually set the MAC address for the vNIC using the Web ClientD. Configure the physical server's MAC address in the virtual switch



QUESTION 83An administrator needs to prevent two virtual machines from running on the same host at any time.

Which DRS rule should the administrator apply?

A. vm-to-vm affinity

B. vm-to-host affinityC. vm-to-vm anti-affinityD. vm-to-host anti-affinity



QUESTION 84A vSphere administrator needs to enable Distributed Resource Scheduling (DRS) in an existing vSphere environment:· The environment contains a High Availability (HA) cluster with eight ESXi hosts.· Six ESXi hosts are not in a cluster.· DRS should be used on as many hosts as possible. · Initial placement of virtual machines should be automatically performed. · Migration recommendationsshould be provided, but not performed without approval.

Which procedure should the administrator perform to accomplish this task?

A. Select the datacenter and create a DRS cluster. Add the six remaining hosts to this cluster, then enable DRS. Edit the DRS settings and change the automationlevel to Partial.

B. Select the existing HA cluster. Add the six remaining hosts to the cluster. Enable DRS, then edit the settings and change the automation level to Manual.C. Select the datacenter and create a DRS cluster. Add the six remaining hosts to this cluster, then enable DRS. Edit the DRS settings and change the automation

level to Manual.D. Select the existing HA cluster. Add the six remaining hosts to the cluster. Enable DRS, then edit the settings and change the automation level to Partial.



QUESTION 85An organization's wants to ensure that if a host in a High Availability (HA) cluster fails, critical virtual machines resume operation even if there are insufficientresources to continue to run all virtual machines in the cluster.Which HA setting should be configured to ensure the cluster operates as expected?

A. VM restart priority

B. Admission Control policyC. VM monitoring sensitivityD. das.checkVmStateDelay



QUESTION 86A vSphere administrator needs to reconfigure the Distributed Power Management (DPM) threshold to be more aggressive.Where should the administrator edit the settings of DPM in the vSphere Web Client?

A. DPM plug-in settingsB. Cluster settingsC. ESXi host power settingsD. vCenter Service Status



QUESTION 87An administrator has created a Virtual Flash Read Cache and needs to add a total 2TB of capacity to the cache. The administrator has a total of six SSD disks toadd, but is unable to add one of the disks.What is a likely cause of the problem?

A. The SSD device size is less than 256GB.B. The SSD device size is greater than 4TB.C. The SSD device is a local disk.D. The SSD device contains existing data.


Explanation


QUESTION 88A DRS cluster has been created with the following specifications:· All mission critical virtual machines are in the root resource pool. · All other virtual machines are placed into two child pools based on medium or low priority. · Thetwo child pools contain adequate resources needed by the medium and low priority virtual machines.· The two child pools are reserving 35% of the total available resources of the cluster.

What is the advantage of leaving the mission critical virtual machines in the root resource pool?

A. The root resource pool has immediate access to new physical resources added to the cluster.B. Virtual machines placed in the root resource pool have a higher vMotion priority in DRS.C. Transparent Memory Page Sharing in the root resource pool has a higher weight than in child pools.D. Virtual machines placed in the root resource pool have higher default share values.



QUESTION 89A vSphere administrator needs to temporarily disable DRS on a cluster containing a resource pool hierarchy.

Which procedure should the administrator follow to preserve the resource pool hierarchy while DRS is disabled?

A. Move the resource pool hierarchy out of the cluster prior to disabling DRS.B. Save the resource pool hierarchy to the administrator's local machine prior to disabling DRS.C. Backup the vCenter Server database and restore the database after re-enabling DRS.D. Create a new cluster and move the resource pool hierarchy to the new cluster prior to disabling DRS.



QUESTION 90A vSphere administrator needs to migrate a virtual machine to another datastore and host without disrupting virtual machine users.Which technique should the vSphere administrator use?

A. Enhanced vMotionB. High Priority vMotionC. Low Priority vMotionD. Storage vMotion



QUESTION 91A vSphere administrator needs to enable Fault Tolerance on a virtual machine. When performing a Storage vMotion migration, which setting should the vSphereadministrator change in the virtual machine's disk format to ensure it meets Fault Tolerance requirements?

A. Thick Provision Eager ZeroedB. Thick Provision Lazy ZeroedC. Thin ProvisionedD. Thin Provision Eager Zeroed



QUESTION 92The vSphere administrator needs to migrate a virtual machine from one host to another. The virtual machine .vswp file resides in local storage. Which twotechniques can the administrator use to migrate the virtual machine? (Choose two.)

A. vMotion migration

B. Cold migrationC. Storage vMotion migrationD. Enhanced vMotion migration



QUESTION 93A customer needs to size a single backup appliance for backing up 3TB of data. There is no requirement for guest level backups of SQL and Exchange. What isthe minimum VMware Data Protection solution and sizing that would fulfill the stated requirements?

A. VMware Data Protection Advanced with a 4TB backup applianceB. VMware Data Protection with a 4TB backup applianceC. VMware Data Protection Advanced with a 3TB backup applianceD. VMware Data Protection with a 3TB backup appliance



QUESTION 94Which tool should an administrator use to modify vSphere Data Protection (VDP) backup jobs?

A. vSphere Web ClientB. vSphere Client using the VDP pluginC. VAMI on the VDP ApplianceD. vSphere Management Appliance



QUESTION 95An administrator receives the following error message:

Unmanaged I/O workload detected on shared datastore.

Which vSphere feature is the likely source of this error?

A. Network I/O controlB. Storage I/O controlC. Storage DRSD. HA datastore heartbeats



QUESTION 96A vSphere administrator is configuring a fully automated DRS cluster and determines that DRS is not balancing virtual machine workloads.What condition could cause this behavior?


A. vMotion is not properly configured on the hosts in the cluster.B. HA is not properly configured on the hosts in the cluster.C. The DRS threshold is configured on the most aggressive setting.D. Some of the virtual machines have been disabled from DRS.



QUESTION 97An organization has a HA/DRS cluster containing a mixture of ESXi 4.1 and 5.5 hosts in the cluster. An ESXi 5.5 host has failed and HA attempted but failed torestart the virtual machines on another host. HA admission control is disabled.

What condition could result in this behavior?

A. A virtual machine has an incompatible hardware versionB. Insufficient resources exist on the remaining ESXi hostsC. vMotion migration is not supported between ESXi 5.5 and 4.1 hostsD. HA failover is not supported between ESXi 5.5 and 4.1 hosts



QUESTION 98Which condition will cause a HA/DRS cluster to display a yellow health indicator?

A. There are insufficient resources to satisfy the cluster's requirements.B. A virtual machine has failed and cannot be restarted in the cluster.C. Virtual machine I/O activity in the cluster has reached or exceeded a critical level.D. One or more hosts in the cluster has entered maintenance mode.



QUESTION 99A vSphere administrator finds a HA/DRS cluster status has turned RED indicating a degraded state.What is the likely reason for the indication?

A. The cluster enabled for HA has lost resources and is unable to fulfill its failover requirements.B. The cluster does not have enough resources to satisfy the reservations of all resource pools and virtual machines.C. Incompatible CPU generations between hosts are preventing DRS migrations.D. The cluster is currently electing a Master host and is unavailable to perform HA functions.




-- Exhibit --

What is indicated by the performance chart shown?

A. Guest memory is overcommitted.B. Host memory is overcommitted.C. Host is I/O constrained.D. Guest is I/O constrained.



QUESTION 101

An administrator needs to use performance information from Windows virtual machines to better understand their effect on the vSphere 5.x hosts on which theyrun.

What must the administrator do to collect this information?

A. Install VMware Tools with the PERFMON counters enabled in the Advanced option of the installer.B. Install VMware Tools. Add counters in the PERFMON utility.C. Install VMware Tools. Edit the VMware Tools settings to enable the VM-specific counters.D. Install VMware Tools. Install the PERFMON plug-in for VMware Tools.



QUESTION 102A vSphere administrator receives a request to capture the state of a virtual machine six times a day.

Which procedure will satisfy the requirement with the least amount of administrator intervention?

A. Use the vSphere web client to configure a scheduled task to take a snapshot every four hours.B. Use the vSphere web client to configure a scheduled workflow to take a snapshot every four hours.C. Use the vSphere web client to manually initiate a snapshot of the virtual machine every four hours.D. Use the vSphere web client to schedule an automated snapshot every four hours using Snapshot Manager.



QUESTION 103What action should an administrator take to store ESXi 5.x host system logs centrally?

A. Configure vCenter Server to automatically export log files to a syslog server at regular intervals.B. Configure vCenter Server to send all log information to a syslog server.

C. Configure each ESXi host to send all log information to a syslog server.D. Configure the syslog server to import log files from each ESXi host at regular intervals.



QUESTION 104An administrator needs to configure an alarm that notifies administrators if an application is impacted by overcommitment of memory resources. The environmentconsists of 100 virtual machines running on 5 ESXi hosts that are configured in a fully automated HA/DRS cluster. The cluster is configured with a parent resourcepool and Production and Development child pools. Where should the administrator set the alarm to meet the requirement?

A. On each virtual machineB. On each hostC. On the Production resource poolD. On the cluster



QUESTION 105What two requirements must be met to create a fully automated Distributed Resource Scheduler (DRS) cluster? (Choose two.)

A. Shared storageB. Hosts with identical processor featuresC. Storage vMotionD. vMotion



QUESTION 106An administrator needs to use vSphere Update Manager to perform orchestrated upgrades of ESXi hosts and virtual machines. The vSphere managementcomponents reside in a secure environment that does not have direct access to the Internet.

How would Update Manager be configured in this environment while maintaining the organization's security requirements?

A. Install Update Manager Download Service on a machine with Internet access and configure an export policy to the Update Manager server.B. Install Update Manager Secure Gateway on a machine in the DMZ and configure an IPsec tunnel to the internal Update Manager server.C. Create a TFTP server as an HTTP proxy and configure an export policy to the Update Manager server.D. Enable gateway services on the Update Manager server and provide Internet access to the gateway address.



QUESTION 107An administrator needs to use vSphere Update Manager for the initial deployment of VMware Tools on a group of newly created virtual machines. When theadministrator scans the objects for compliance, a compliance state of Incompatible is returned.How should the administrator resolve the issue?

A. Install VMware Tools manually on the new virtual machines.B. Ensure the latest version of VMware Tools has been downloaded to the Update Manager repository.C. Enable the Upgrade VMware Tools on Power Cycle option.D. Create a separate baseline object for each guest OS type .



QUESTION 108An administrator is installing ESXi 5.x to a local SAS drive. The installation stops on a purple screen and shows the error:

The system has found a problem on your machine and cannot continue. Could not populate the filesystem: Admission check failedWhich action should the administrator take to resolve this issue?

A. Upgrade the ESXi host to meet the minimum hardware requirement for installation.B. Disable the network interface cards (NICs) to ensure that third-party drivers do not interfere with installation.C. Enable hardware Virtualization Technology in the ESXi host BIOS.D. Disable the Host Bus Adapters (HBA) to ensure the installation targets the local disk.



QUESTION 109An administrator notices that a virtual machine fails to start when right-clicking on the VM in the inventory and clicking Power -> Power On.

Which log file should the administrator check first to determine why the virtual machine will not start?

A. vmkernel.logB. messagesC. vpxa.logD. fdm.log



QUESTION 110A vSphere administrator is performing maintenance on a group of ESXi 5.5 hosts when an error message displays indicating that the ramdisk is full. The two hostsreporting the problem were deployed with Auto Deploy. What should the administrator do to resolve this issue?

A. Redirect host logs to an NFS storeB. Disable the System Logs through the host DCUIC. Decrease the maximum host log file size to 10240KB

D. Move the ramdisk to an SSD drive



QUESTION 111An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. Theadministrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease?

A. Restart Management NetworkB. Restore Network SettingsC. Test Management NetworkD. Configure Management Network




-- Exhibit --

A vSphere administrator assigns VLAN 3389 to the Production port group on the VCP_DCV_Example vSphere Distributed Switch. After the change, users report aloss of connectivity to their applications. Further analysis provides the following data:· The cluster has not had a ESXi host failure.· Application functioned normally prior to the change. · The loss of connectivity occurred immediately following the change. Which condition would cause this loss ofconnectivity?

A. The physical switch ports used by the vmnics have not been configured with 802.1Q.B. Maintenance Mode was initiated on one of the hosts in the cluster. Connectivity will resume after the virtual machines are migrated.C. All uplinks were removed from the VCP_DCV_Example switch and added to another virtual switch.D. A load balancing setting on the port group conflicts with the load balancing setting of the switch.

Correct Answer: A



QUESTION 113Why would an administrator be unable to locate an IP address for a vSphere vmnic uplink?

A. IP addresses are defined at the virtual nic level, not the vmnic level.B. ESXi host vmnics communicate with physical switches on layer 3.C. ESXi hosts use NAT translation to mask the actual vmnic IP address.D. The IP address of the vmnic is not shown in the vSphere Client.



QUESTION 114Which database platform is embedded within the vApp architecture of vCenter Operations Manager?

A. MySQLB. IBM DB2 ExpressC. Oracle 11g ExpressD. vPostgres



QUESTION 115An administrator attempts to delete a Storage Policy and receives an error. Which two object types, if assigned a Storage Policy, would prevent the Storage Policyfrom being deleted? (Choose two.)

A. A virtual machine.B. A virtual disk.C. A datastore.D. A datastore cluster.



QUESTION 116An administrator has configured hardware acceleration for a Fibre Channel storage array. After a recent maintenance event, the administrator finds that cloning andmigration operations are taking excessively long to complete.Which two settings could cause hardware acceleration to become disabled? (Choose two.)

A. VAAI Plugin Name = VMW_VAAIP_SYMB. VAAI Plugin Name = VMW_VAAIP_NETAPPC. VMFS3.HardwareAcceleratedLocking = 0D. Datamover.HardwareAcceleratedInit = 0



QUESTION 117A VMFS5 datastore shows several errors, which suggests file system corruption. Which tool could a vSphere administrator use to check the VMFS file system?

A. vSphere On-disk Metadata Analyzer (VOMA)B. VMware Infrastructure Management Assistant (VIMA)C. vSphere Storage APIs for Storage Awareness (VASA)D. VMware vSphere Health Check Analyzer (VHCA)

Correct Answer: A



QUESTION 118A Windows Server 2008 virtual machine with the following configuration receives an Out of Space condition indicator:· The virtual machine uses thin provisioned virtual disks. · The VMFS5 datastore on which the virtual machine's files reside is on a thin provisioned LUN. · 30% ofthe VMFS datastore content is no longer needed.· The storage array supports VASA and VAAI.Which action should the vSphere administrator take to resolve the Out of Space problem without requesting additional space on the storage array?

A. Delete unneeded files on the VMFS datastore and then use vmkfstools to reclaim deleted blocks.B. Delete unneeded files on the VMFS datastore, right-click the datastore in vSphere Web Client, and then select the Reclaim Deleted Blocks option.C. Delete some files from the guest OS and defrag its file system.D. Delete some files from the guest OS and use vmkfstools to reclaim the deleted blocks.



QUESTION 119A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features.

Which edition of vSphere provides similar functionality to evaluation mode?

A. Enterprise PlusB. EnterpriseC. StandardD. Essentials



QUESTION 120An application administrator reports application slowness when loading the application's web portal. The virtual machine is currently connected to a vSphereDistributed Switch. The application owner requests information about the virtual machine's network traffic. Which feature of a vSphere Distributed Switch should theadministrator use to gather the needed information?

A. NetFlowB. Port MirroringC. Network I/O ControlD. Promiscuous Mode




-- Exhibit --

A vSphere administrator created a Virtual SAN and a relevant virtual machine Storage Policy. The administrator is unable to select this virtual machine StoragePolicy when creating a new virtual machine.Based on the exhibit, why is the administrator unable to select this virtual machine Storage Policy?

A. The administrator did not enable the virtual machine Storage Policy per compute resource.B. The ESXi Host license does not support virtual machine Storage Policies.C. The vCenter Server license does not support virtual machine Storage Policies.D. The administrator did not create a storage policy for the datastore selected for the virtual machine.



QUESTION 122An administrator is planning a vSphere Fault Tolerance implementation for 6 virtual machines. Which two virtual disk types are supported with FT? (Choose two.)

A. Raw Device Mapped LUN configured for Virtual Compatibility ModeB. Raw Device Mapped LUN configured for Physical Compatibility ModeC. Virtual disk thick provisioned, eager zeroedD. Virtual disk thick provisioned, lazy zeroed



QUESTION 123What is the purpose of configuring a VMkernel port for Fault Tolerance logging?

A. The selected vmkernel port is used to send external inputs from a primary virtual machine to its secondary counterpart.B. The selected vmkernel port is able to log Fault Tolerance events to a syslog server.C. The selected vmkernel port is used to trigger a failover from the primary machine if a hardware crash occurs.D. The selected vmkernel port is able to maintain a log of changes to the secondary virtual machine.



QUESTION 124A vSphere administrator has configured a virtual machine alarm to trigger a warning when the condition Snapshot Size exceeds 1GB.Which action should the administrator configure on the alarm to automatically resolve the condition?

A. Delete SnapshotB. Reset VMC. Run a CommandD. Consolidate Snapshot

Correct Answer: C



QUESTION 125A vSphere administrator is attempting to upgrade an ESXi host using vSphere Update Manager. The administrator has attached the baseline and remediated thehost. Update Manager reports the remediation process has completed successfully. However, upon inspection the host is not upgraded.What is the most likely reason for this issue?

A. The ESXi host has less than 10MB free in its /tmp directory.B. The user performing the upgrade has insufficient privileges.C. The Update Manager service has not been configured with root level access to the host.D. The baseline has been configured using an invalid ISO image.



QUESTION 126The vSphere administrator needs to migrate a virtual machine from one ESXi 5.5 host to another ESXi 5.5 host. The virtual machine has a virtual disk that is storedin local storage. Assuming only the vSphere Essentials licensing is in place, which technique should the administrator use to accomplish the migration?

A. vMotion migrationB. Cold migrationC. Enhanced vMotion migrationD. Storage vMotion migration



QUESTION 127A vSphere administrator needs to add a CPU to a virtual machine, but upon editing the VM settings the option is grayed out.What would explain this behavior?

A. The virtual machine is runningB. The virtual machine has been configured with a CPU limitC. CPU Hot-add has not been enabled on the virtual machineD. The virtual machine is in a resource pool with no available CPU resources



QUESTION 128A host in a 4-node HA\DRS cluster has failed. HA initiates restart tasks for the virtual machines on the remaining hosts in the cluster but half of them fail to restart.What is the likely reason virtual machines fail to restart?

A. HA admission control is blocking the restart of the virtual machines due to insufficient resources to support the configured failover level of the cluster.B. The vMotion network has failed on the remaining hosts preventing the virtual machines from migrating.C. Storage vMotion has failed on the datastore containing the virtual machines preventing them from migrating.D. The failed host was the Master host in the cluster and no other hosts are able to perform the necessary HA function to restart the virtual machines.



QUESTION 129An administrator needs to install vSphere Update Manager using an external SQL Server 2008 R2 database. The administrator has created the databasesuccessfully, but cannot establish connectivity when testing the DSN.Which configuration setting could be causing the issue?

A. The database was configured to use Windows authentication.B. The DSN was configured using a 32-bit ODBC connection.

C. Update Manager does not support the use of a remote database.D. Port 9087 is being blocked by Windows Firewall on the Update Manager server.



QUESTION 130While troubleshooting a crash event on an ESXi 5.x host, an administrator determines the log files related to the event are NOT present.Which action should the administrator take to resolve the logging issue?

A. Increase the amount of memory committed to log storage.B. Increase the statistic data collection level to 4.C. Change the roll-up type to maximum.D. Create a persistent scratch location.




-- Exhibit --

The administrator needs to modify the problematic configuration shown in the exhibit to meet the following requirements:1. Uplink ports must connect to a 2-port Etherchannel connection. 2. Traffic must pass, even in the event of a port failure.

Which two configuration changes should the administrator make? (Choose two.)

A. Change the Load balancing algorithm to Route based on ip hashB. Change the Load balancing algorithm to Route based on physical NIC loadC. Move Uplink 1 into Active Uplinks and Uplink 2 into Standby UplinksD. Move both uplinks into the Active Uplinks

Correct Answer: AD



QUESTION 132When a vSphere administrator attempts to remediate a host with Update Manager, the host is unable to enter maintenance mode.Which condition is likely preventing the host from entering maintenance mode?

A. A virtual machine on the host has a removable device connected.B. A virtual machine on the host is configured to use Fault Tolerance.C. A virtual machine is powered off and cannot be migrated to another host.D. A virtual machine is configured with a local .vswp file.



QUESTION 133While shutting down a vApp for maintenance, a vSphere administrator determines that one of the virtual machines stays powered on. The administrator manuallypowers off the virtual machine inside the vApp.

Which step should the administrator take to prevent the virtual machine from staying powered on in the future?

A. Change the Shutdown Action for the virtual machine to NoneB. Change the Shutdown Action for the virtual machine to Power OffC. Change the Shutdown Action for the virtual machine to ManualD. Change the Shutdown Action for the virtual machine to Excluded



QUESTION 134An administrator needs to create an alarm to monitor when a specific ESXi host in an HA/DRS cluster becomes disconnected from other vSphere components likeHA agents or the vCenter server.

Which process must the administrator use to accomplish this?

A. Define a Host type alarm, monitor for the event Cannot connect host, and supply a conditional trigger on Host name equal to a specific label.B. Define a Cluster type alarm, monitor for the event Cannot connect host, and supply a conditional trigger on Host name equal to a specific label.C. Define a Cluster type alarm, monitor for the event Host status changed, and supply a specific label for each host.D. Define a Host type alarm, monitor for the condition Host status changed, and supply a specific label for each host.



QUESTION 135An ESXi 5.x host is unable to connect to a vCenter 5.x server.


Which commands should an administrator use to restart the management agents on the host?

A. SSH to the host and execute the commands - /etc/init.d/hostd restart and /etc/init.d/vpxa restartB. SSH to the host and execute the commands - /etc/init.d/vpxd restart and /etc/init.d/vpxa restartC. SSH to the host and execute the commands - /etc/init.d/vmware-hostd restart and /etc/init.d/vmware-vpxa restartD. SSH to the host and execute the commands - /etc/init.d/vmware-hostd restart and /etc/init.d/vpxd restart




-- Exhibit --

Why is the network configuration shown in the exhibit impossible?

A. A single vmnic cannot be shared by two virtual switches.B. The MAC address of the Management Network VMkernel port is invalid.C. Virtual machines are not allowed to run on the same virtual machine port group as the vCenter Server Virtual Appliance.D. Virtual Machine Port Groups and VMkernel Ports are not allowed on the same virtual switch.




-- Exhibit --

An administrator is unable to configure Receive Side Scaling on the vmnic driver in a Windows 2008 R2 guest.Based on the exhibit, what would need to be modified to enable this option?

A. Manually configure a static MAC addressB. Enable DirectPath I/OC. Ensure the vmnic is attached to the correct networkD. Change the adapter type to VMXNET3

Correct Answer: D



QUESTION 138The Edit Settings wizard reports a virtual machine is configured as follows:-- Exhibit --

-- Exhibit --

Which setting, if NOT configured, will prevent network connectivity?

A. The network label must be supplied.B. The MAC address must be supplied.C. The device status must be set to Connected.D. The DirectPath I/O status must be Supported.



QUESTION 139An administrator needs to provide a report that will help managers better understand how all of their virtual machines are sized.

Which report within vCenter Operations Manager should the administrator provide?

A. Undersized Virtual Machines ReportB. Configured Host or Cluster Capacity ReportC. Virtual Machine Capacity Overview ReportD. Virtual Machine Optimization Report



QUESTION 140The following error displays during the final step of the configuration for a VMware High Availability (HA) cluster attached to five datastores:The number of heartbeat datastores for host is 0, which is less than requireD. 2 What condition would cause this error?

A. One of the hosts in the cluster is not attached to the datastores planned for use with HA.B. The hosts in the cluster do not have Storage DRS configured on one or more of their datastores.C. One of the hosts in the cluster has an invalid Storage Policy configured on one or more of their datastores.D. The hosts in the cluster contain one or more datastores configured with a 1 MB block size.



QUESTION 141Which two statements accurately describes step that are taken to recover a virtual machine using vSphere Replication? (Choose two.)

A. A recovery is initiated from the target site.B. A recovery is initiated from the source site.C. Upon recovery, the virtual machine is automatically attached to it's configured network.D. Upon recovery, the virtual machine must be manually attached to a network.



QUESTION 142An administrator needs to provide a report that shows how many virtual machines can be added to an existing vSphere environment.

Which report within vCenter Operations Manager meets this requirement?

A. Cluster or Host Capacity Inventory ReportB. Configured Host Capacity ReportC. Virtual Machine Capacity Overview ReportD. Virtual Machine Optimization Report



QUESTION 143An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the systemconfiguration to the default settings?

A. Reset System Configuration

B. Rebuild Default System ConfigurationC. Revert System ConfigurationD. Renew Default System Configuration



QUESTION 144Using the vSphere Web Client to display Software iSCSI Initiator properties reveals that one of two configured paths is Not Used.The ESXi syslog events are as shown:

-- Exhibit --

-- Exhibit --

What is the root cause of the problem?

A. The VMkernel adapter named vmk3 is on a subnet different from the iSCSI server's subnet.

B. The path will only become Active if the VMkernel adapter named vmk1 loses connectivity.C. The VMkernel adapter named vmk3 has lost network connectivity.D. The VMKernel adapter named vmk3 is on a different vSwitch from vmk1.



QUESTION 145A number of virtual machines in a vSphere 5.5 DRS cluster are connected to the same virtual switch port group. After several of these VMs are migrated to anotherhost, an administrator notices that they have lost network connectivity. The Events tab in vCenter Server shows this error message:Failed to initialize ethernet0.

The vmkernel log file on the host running the affected VMs contains this message:

Can't connect device:'port group name': Out of resources.

Which caused this issue?

A. Network I/O Control was enabled.B. The DRS cluster containing the VMs was set to Fully Automated with the Migration Threshold set to Conservative.C. There were insufficient uplinks configured on the virtual switches.D. The virtual switch port allocation was changed from the default setting.



QUESTION 146Which privilege should the administrator assign to allow a user to create baselines using Update Manager?

A. Manage baselineB. Attach baseline

C. Stage baselineD. Configure baseline



QUESTION 147A VMware administrator determines that a low priority virtual machine is negatively affecting the disk I/O performance of a higher priority virtual machine. The virtualmachines are hosted on the same datastore presented to the same ESXi host. Which configuration option should the VMware administrator use to resolve thisissue?

A. Increase the disk share value for the high priority VM.B. Migrate the low priority VM to another ESXi host.C. Create a Storage Profile for each priority level.D. Enable vSphere APIs for Array Integration (VAAI).



QUESTION 148An administrator needs to create an IP allocation policy for a multi-tiered application running in a vApp.The IP addresses should be allocated automatically by vCenter Server, but should not be released even if a virtual machine is powered off.Which IP allocation model should the administrator use for the vApp?

A. Static - ManualB. Transient - IP PoolC. DHCPD. Static - IP Pool

Correct Answer: DSection: (none)

Explanation


QUESTION 149A new LUN has been created on an iSCSI array and assigned to an ESXi 5.x server . However, when the administrator logs in to the vSphere Web Client the LUNis not visible. Other LUNs on the iSCSI array are visible.What should the administrator do to resolve this issue?

A. Rescan for the new storage deviceB. Ensure the LUN is zoned correctlyC. Add the new LUN to the Static Discovery listD. Ensure the CHAP settings are correctly configured



QUESTION 150An administrator decreases the CPU share value for two virtual machines in a DRS cluster from 1000 to 100 shares. The DRS cluster contains more resourcesthan both virtual machines can consume.

The characteristics of the virtual machines are listed below:· The second virtual machine is a clone of the first virtual machine. · Both virtual machines are identical in every way. · Both virtual machines are not attached to theIP network.· Both virtual machines are powered on.

What impact on the virtual machines' performance will be observed?

A. The virtual machines will have equal performance under all conditions.B. The performance of the virtual machines will reduce by a factor of ten once the share value is adjusted.C. The virtual machines will have equal performance under normal conditions and reduced performance when contention occurs.D. The original virtual machine will perform better than the clone when contention occurs.


Explanation


QUESTION 151A vSphere administrator needs to add more space to an existing 3-node Virtual SAN cluster. The attempts to add the new host to the cluster as a contributingmember have failed. However, it can be added as a non-contributing member.The host was previously used in a single host configuration. The administrator recently upgraded the host from ESXi 5.1 to 5.5 prior to adding it to the cluster.What is the reason for this failure?

A. The only SSD disk in the new host was formatted with a VMFS datastore.B. The new host has a 10Gbps NIC while the rest of the cluster members have 1Gbps NICs.C. The RAID controller in the new host does not have enough cache for the Virtual SAN datastore.D. The new host's VMFS datastores do not have sufficient capacity to be added as a contributing member.



QUESTION 152An administrator is preparing to install an additional Single Sign-On node on a stand-alone server.What information is required during the installation routine?

A. Active Directory domain name and credentialsB. System DSNC. Partner Host NameD. Lookup Service URL



QUESTION 153

-- Exhibit --

-- Exhibit --

The vCenter Operations Manager dashboard shows Health issues associated with the selected virtual machine. There have been no availability or configurationissues associated with the virtual machine, and the workload badge is still green.

What is the most likely reason for this health score?

A. The workload for the virtual machine is higher than normal, which is generating a large number of anomalies within vCenter Operations Manager.B. A high stress and a pattern of constrained resources has been attributed to the virtual machine in vCenter Operations Manager.C. A recent migration to another host in the cluster has violated HA admission control policy.D. vCenter Operations Manager has determined that the time remaining for the virtual machine's assigned CPU resources is very low.



QUESTION 154A new LUN from an existing storage array is presented to a vSphere cluster. A vSphere administrator determines that the LUN is visible on all but one ESXi host inthe cluster. The affected host is able to see existing LUNs presented from the same storage array.

What is the most likely cause?

A. LUN Masking is improperly configured on the storage array.B. The SAN fabric is improperly zoned.C. The ESXi host has NOT been rebooted.D. The HBA in the host is incompatible with ESXi.



QUESTION 155A vApp is performing poorly and an administrator determines that the memory resources are low.How should the administrator resolve this issue?

A. Configure a memory reservation for the vApp.B. Configure a memory reservation for each VM in the vApp.C. Rebuild the vApp using the wizard and assign memory reservations to the vApp.D. Rebuild the vApp using the wizard and assign memory reservations to each VM.



QUESTION 156Which information does the CPU Ready counter provide to a vSphere administrator?

A. The virtual machine has requested CPU time, but the VMkernel cannot schedule the virtual CPU on a physical CPU.B. The virtual machine is idle, and the VMkernel has idle physical CPU cycles.C. The virtual machine has requested CPU time, and the VMkernel has idle physical CPU cycles.D. The virtual machine is idle, but the VMkernel cannot schedule the virtual CPU on a physical CPU.



QUESTION 157Which Web service is installed during the vCenter Server installation?

A. Internet Information Service (IIS)B. WEBrickC. Tomcat Web serverD. LiteSpeed Web server



QUESTION 158A vSphere administrator has a 4 host DRS cluster with plans to grow to 8 hosts. During a vMotion migration, the following error is displayed:

-- Exhibit --

-- Exhibit --

What action could be taken to resolve the issue?

A. Ensure all hosts in the cluster contain only Intel or AMD CPUsB. Choose Reset all to Default in the CPU Identification Mask of the VMC. Verify and correct the vmkernel port settings for the vMotion networkD. Configure the DRS Migration Threshold to the most conservative setting



QUESTION 159A large aerospace company utilizes a mission critical application requiring a large database server with 16 vCPUs and 500GB of RAM. Because of the criticalnature of the application, the company also wants to leverage Reliable Memory Technology.

What is the minimum edition of vSphere that will support this scenario?

A. vSphere Standard EditionB. vSphere with Operations Management Standard Edition

C. vSphere Enterprise EditionD. vSphere with Operations Management Enterprise Edition



QUESTION 160A large medical institution needs to centralize malware and anti-virus scanning in its environment.Which vSphere component will satisfy this requirement?

A. vShield EndpointB. vCloud Network and SecurityC. vSphere Data Protection AdvancedD. vCenter Operations Manager



QUESTION 161An administrator is setting up a new vSphere environment for application development with health monitoring and capacity management. The administrator haspurchased three servers for the initial install. The administrator is NOT planning to grow the environment and needs to keep costs as low as possible.

Which vSphere kit should the administrator use to meet these requirements?

A. vSphere Essentials KitB. vSphere Essentials Plus KitC. vSphere with Operations Management Standard Acceleration KitD. vSphere with Operations Management Enterprise Acceleration Kit

Correct Answer: CSection: (none)

Explanation


QUESTION 162What is the correct order to install vCenter Server 5.x components?

A. vCenter Single Sign-On, Inventory Service, vCenter Server


B. vCenter Server, vCenter Single Sign-On, Inventory ServiceC. vCenter Server, Inventory Service, vCenter Single Sign-OnD. vCenter Single Sign-On, vCenter Server, Inventory Service



QUESTION 163What is not a supported method for increasing the availability of a vCenter Server virtual machine?

A. vSphere High AvailabilityB. vSphere Fault ToleranceC. vCenter Server HeartbeatD. Site Recovery Manager



QUESTION 164An administrator has deployed vSphere Data Protection and wants to configure several virtual machine backup jobs. When using the vSphere client on a Windows7 desktop, the administrator notices that there is no icon for vSphere Data Protection in the Solutions and Applications area of the vSphere client.What is the reason the administrator is unable to access vSphere Data Protection from the vSphere client on their desktop?

A. The vSphere Data Protection client plug-in is not installed on the administrator's desktop.B. Accessing vSphere Data Protection requires the use of the vSphere Web Client.C. The vSphere Data Protection plug-in is disabled in the vSphere Client on the administrator's desktop.D. The administrator's desktop does not have connectivity to the vSphere Data Protection virtual appliance.



QUESTION 165An administrator needs to continue using ESXi after the 60-day evaluation period expires. The administrator has obtained a valid license from VMware. Which stepmust the administrator take to deploy the license?

A. Add the license to the ESXi hostB. Perform an in-place upgrade of the free vSphere Hypervisor to the paid versionC. Add the ESXi host to a licensed vCenter ServerD. Re-install the host with standard ESXi and the obtained license



QUESTION 166How should a vSphere administrator disable memory compression?

A. Attach a vSphere Client to an ESXi host and edit the Mem.MemZipEnable advanced setting.B. Connect to vCenter Server using the vSphere Client and edit the virtual machine. Insert the Mem.MemZipDisable option and set the value to True.C. Connect a vSphere Client to vCenter Server and configure the Memory Compression setting from the Administration menu.D. Reboot the ESXi host and disable memory compression in the BIOS under Advanced Settings.



QUESTION 167Which installation method is not available for a new deployment of ESXi 5.x?

A. Update Manager installationB. Text-based interactive installationC. Scripted installationD. Auto Deploy installation



QUESTION 168Which VMware Tools upgrade method minimizes the need for scheduled downtime?

A. Use vCenter Server to select and upgrade virtual machinesB. Use vSphere PowerCLI and create a script to upgrade the virtual machinesC. Use Update Manager to perform an orchestrated upgrade of virtual machinesD. Configure the virtual machines to check for and install updates at each reboot cycle



QUESTION 169Before upgrading from vCenter 4.x to 5.x, an administrator runs the vCenter Host Agent Pre- Upgrade Checker. The Checker reports an issue.What would cause the vCenter Host Agent Pre-Upgrade Checker to report an issue?

A. The .NET framework 3.5 is installed.B. The host network card is only 1 Gbps.C. The file system is not intact.D. The VMFS file system is version 4.0.



QUESTION 170An organization has a cluster of 6 ESXi hosts. Security policy requires that all administrative activity occurs through vCenter Server and not directly on the hosts.Which action should a system administrator take to enforce this policy?

A. Use the vSphere client to right-click on the cluster and select Enable lockdown mode on the ESXi hosts in the cluster.B. Use the vSphere client to navigate to the Security Profile of each ESXi host and enable lockdown mode.C. Connect to the DCUI of each ESXi host and navigate the menus to the Troubleshooting Options and enable lockdown mode.D. Connect to the ESXi shell on each host and type the command service lockdown start.



QUESTION 171An administrator needs to join several ESXi hosts in the environment to the corporate Active Directory instance. The container and path for the OU is Servers\VMware. The FQDN of the local Active Directory is CORP.AD.Which option accurately shows the information an administrator would enter when configuring an ESXi host to join the domain and ensures the host is placed in the

appropriate OU?

A. ldap://CORP.AD:389/Servers/VMwareB. CORP.AD/Servers/VMwareC. cn=VMware, ou=Servers, dc=CORP, dc=ADD. ou=VMware, ou=Servers, dc=CORP, dc=AD



QUESTION 172An administrator needs to implement trusted SSL certificates for all vCenter 5.5 components.

Which component needs an SSL certificate?

A. Update ManagerB. Auto DeployC. ESXi Dump CollectorD. Network Syslog Collector



QUESTION 173The oncall system administrator has made a change on the ESXi host requiring a restart of the management network. Lockdown mode is enabled.Which action should the administrator take to restart the management network?

A. Use the vSphere client to enable local authentication services, then logon directly to the ESXi Shell and run services mgmt-vmware restart.B. Use an SSH client to logon to the command line and run services mgmt-vmware restart.C. Use the vSphere client to enable the DCUI and then logon to the ESXi Shell and use the menu to restart the management network.D. Logon directly to the DCUI and use the menu to restart the management network.



QUESTION 174A vSphere administrator has created a vSphere Standard Switch with one virtual machine port group and one physical uplink. The administrator needs to ensurethat the virtual machines on this port group can communicate only with each other.What should the administrator do?

A. Remove the physical uplink from the vSphere Standard SwitchB. Create a Private VLAN and apply it to the virtual machine port group on the vSphere Standard SwitchC. Enable Port Security on the vSphere Standard SwitchD. Enable the Fenced setting on the virtual machine port group



QUESTION 175A vSphere administrator needs to add redundancy to an ESXi 5.x management network on a vSphere Standard Switch.Which method should the administrator use to create redundant management networks?

A. Configure the management network vSwitch with two active uplinksB. Configure an additional management portgroup on the same vSwitchC. Create a second management network on a second vSwitch in the same subnetD. Create a second management network on the same vSwitch in the same subnet



QUESTION 176An administrator is building a new vSphere Standard Switch with two active uplinks. The physical switch ports for these uplinks are placed in an etherchannel.

Which load balancing policy should the administrator use to support the etherchannel configuration?

A. Route based on IP hashB. Route based on the originating virtual portC. Route based on source MAC hashD. Route based on physical NIC load



QUESTION 177Which two traffic types can be enabled on the VMkernel adapters of an ESXi 5.5 host using the vSphere Web Client? (Choose two.)

A. Fault Tolerance TrafficB. Virtual SAN TrafficC. iSCSI TrafficD. Virtual Machine Traffic



QUESTION 178An organization is designing a new vSphere cluster to support a new product implementation. The following challenges have been identified by the vSphereadministration team:· The organization has the vSphere Enterprise License. · The network team needs to gather virtual machine network statistics over a long period of time. · Thenetwork team needs the ability to quickly assess virtual machine traffic in the event of an attack.· The network team has previously had problems implementing manual etherchannel configurations on their physical switches, resulting in production outages.

· The new cluster's initial size is 15 hosts.

The organization is willing to upgrade to vSphere Enterprise Plus licensing if it addresses these challenges.

Which three features of a version 5.5 vSphere Distributed Switch would address these challenges? (Choose three.)

A. LACP in Dynamic ModeB. Port MirroringC. Network vMotionD. Private VLANs

E: Network I/O Control

Correct Answer: ABCSection: (none)Explanation



-- Exhibit --Users accessing the WinXP virtual machine shown in the exhibit report intermittent connectivity to the corporate network.

The configuration is as follows:· This virtual machine runs in a DRS/HA cluster of two ESXi hosts. · The VCP_DCV_Example vSphere Distributed Switch was recently created. · The WinXPvirtual machine was recently migrated from another vSphere Distributed Switch. · The WinXP virtual machine was able to connect prior to migration to this switch. ·No changes to the VCP_DCV_Example switch have been made since creation.

Which step should the administrator take to resolve the WinXP virtual machine's intermittent connectivity to the corporate network?

A. Add the ESXi host to the switch where the virtual machine is currently runningB. Disable Port Blocking on the VCP_DCV_Example switchC. Disable Port Blocking on the Production port groupD. Enable Network I/O Control on the switch to better balance I/O

Correct Answer: A



QUESTION 180An administrator needs to deploy a vSphere solution containing a number of hosts and a vSphere Distributed Switch.Which steps should the administrator take to accomplish this?

A. Create the vSphere Distributed Switch, deploy the ESXi hosts, and then add each host to the switch.B. Deploy the ESXi hosts, create an HA/DRS cluster containing the hosts, create the vSphere Distributed Switch, and then add the cluster to the switch.C. Create the vSphere Distributed Switch and as each ESXi host is deployed it will be automatically added to the switch.D. Deploy the ESXi hosts and then create the vSphere Distributed Switch on the hosts.



QUESTION 181An administrator is migrating 135 virtual machines from a vSphere Standard Switch to a vSphere Distributed switch. The migration reports an error and only someof the virtual machines are transferred.

What is causing the error to occur?

A. The vSphere Distributed Switch was created with a single, default port group.B. The switch has become disconnected from an ESXi host.C. The port group on the vSphere Distributed Switch was not configured with an Elastic port binding.D. The virtual machine that failed to transfer did not have a network adapter.



QUESTION 182A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtual machine is attached to a vSphere Standard Switch configuredwith several VLANs. Which approach could the administrator use to configure the network to capture all traffic from the Linux virtual machine?

A. Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group containing the virtual machine.B. Configure a vSphere Distributed Switch with VLAN Trunking. Create a port group and configure it with Promiscuous Mode. Connect the virtual machine to that

port group.C. Configure the port group containing the virtual machine for Promiscuous Mode. Set the port group to use VLAN 1.D. Configure a vSphere Distributed Switch with VLAN Trunking. Connect the virtual machine to the switch and enable Port Mirroring on the port group containing

the virtual machine.



QUESTION 183Which configuration will block communication between two virtual machines on the same DMZ network?

A. An isolated Private VLAN configured on a distributed switch and the two DMZ server virtual machines connected to the same port groupB. Two different port groups created on a distributed switch and 1 DMZ server virtual machine connected to each port groupC. Two different port groups created on a standard switch and 1 DMZ server virtual machine connected to each port groupD. The security policy exception set to Reject for the switch to which the two DMZ server virtual machines will be connected



QUESTION 184An administrator has configured multi-pathing using an Fiber Channel array in an active-active configuration.

What is the expected behavior of an ESXi host when a failed preferred path becomes available using the Fixed path selection policy for this array type?

A. It automatically reverts to the preferred path.

B. It continues using the current path until it is manually reverted.C. It resumes load balancing across all available paths.D. It reverts to the preferred path after the host has been restored and rebooted.



QUESTION 185An administrator is deploying vSphere using a NAS device as the shared storage system. The administrator has already created a VMkernel port, enabled the NFSclient, and configured a mount point accessible to the hosts.Which additional configuration is required before the datastore can be used to create virtual machines?

A. The ESXi hosts must have root access to the datastore.B. The NAS must support NFS version 4.C. Port binding must be configured on the VMkernel port.D. The MTU on the VMkernel port must be set to 9000.



QUESTION 186An administrator is considering using NPIV to assign WWNs to virtual machines. Virtual machine portability is a major concern.Why would NPIV be inappropriate for this deployment?

A. Virtual machines using NPIV must use DirectPath I/O.B. Storage vMotion is not supported using NPIV.C. vMotion is not supported using NPIV.D. Enabling NPIV requires SR-IOV supported hardware.


Explanation


QUESTION 187An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using the vSphere client. The administrator has configured discoveryand performed a rescan operation, but the iSCSI target does NOT appear.

Which action should the administrator take for the target to appear in the vSphere client?

A. Configure appropriate CHAP authentication settingsB. Bind a VMkernel port to the iSCSI initiatorC. Configure Jumbo Frames prior to adding iSCSI targetsD. Enable iSCSI in a vSphere Distributed Switch configuration




-- Exhibit --

Which field should an administrator add to a Virtual SAN Disk Group under the Device Backing settings to monitor the health of disks in the Disk Group?

A. IssueB. Operational StatusC. CapacityD. Transport Type



QUESTION 189An administrator has created a Virtual SAN Cluster using Automatic Mode Disk Groups. There is very little storage space left in the cluster. The administrator hasaccess to an iSCSI storage array.


Which approach should the administrator take to expand the Virtual SAN Cluster?

A. Add new hosts to the cluster with available local disks then click the Claim Disks icon in the Disk Management section under the Virtual SAN tab.B. Add new disks to the hosts in the cluster then click the Claim Disks icon in the Disk Management section under the Virtual SAN tab.C. Add new hosts to the cluster with available local disk. No further action is required to claim the added storage.D. Provision new LUNs on the iSCSI storage and present one LUN to each host in the cluster.

No further action is required to claim the added storage.



QUESTION 190A vSphere administrator needs to place an ESXi host in maintenance mode to replace a hardware component. This host is a member of a Virtual SAN cluster thatuses Automatic Mode Disk Groups. Availability of virtual machines running on this host is critical. HA and DRS are enabled on the Virtual SAN Cluster. Otherwise,the Virtual SAN cluster uses default values. Which action should the administrator take to automatically guarantee availability of virtual machines with the fastestmigration time?

A. Select Enter Maintenance Mode and accept the default valuesB. Select Enter Maintenance Mode and select Full Data Migration optionC. Select Enter Maintenance Mode and select No Data Migration optionD. Migrate the virtual machines to another host and datastore then select Enter Maintenance Mode



QUESTION 191What is a characteristic of Virtual SAN?

A. It supports Virtual Machine Storage Policies.B. It supports multiple Virtual SAN clusters for each host.C. It supports native snapshots and SE Sparse disks.D. It supports storage attached through USB, Fibre Channel, or iSCSI.



QUESTION 192Which two steps can an administrator take to upgrade an existing VMFS2 datastore to VMFS5? (Choose two.)

A. Attach the VMFS2 datastore to an ESX 3.x host and upgrade it to VMFS3

B. Attach the VMFS2 datastore to the vSphere 5 host and upgrade it to VMFS3C. Upgrade the datastore from VMFS3 to VMFS5 on a vSphere 5 hostD. Upgrade the ESX host attached to the storage to vSphere 5



QUESTION 193A customer needs to select an appropriate Path Selection Policy (PSP) for their storage array. There is no requirement for a preferred path. The policy should notselect a new path unless the current one fails.Which PSP meets the requirement?

A. FixedB. Round RobinC. Most Recently UsedD. Asymmetric Logical Unit Access



QUESTION 194An administrator needs to unmount a datastore that is also used for HA storage heartbeats.

What is the least disruptive method for an administrator to perform this activity on a slave HA host?

A. On the Datastore Heartbeating tab, unmount the datastore normally and confirm a new datastore has been selected.B. On the Datastore Heartbeating tab, specify an alternate datastore, then unmount the datastore normally.C. Disable HA datastore heartbeats, then unmount the datastore.D. Reduce the number of heartbeat datastores, then remove the datastore from the heartbeat list.

Correct Answer: B



QUESTION 195When deploying two sibling resource pools (RP1 and RP2), an administrator needs to make all resources in RP1 available to virtual machines in RP2.

Which configuration should the administrator use to meet this requirement?

A. Set the Reservation of RP2 to 0B. Set the Reservation of RP1 to 0C. Set the Limit of RP1 to UnlimitedD. Set the Limit of RP2 to Unlimited



QUESTION 196Which controller is recommended for high disk I/O workloads?

A. BusLogic ParallelB. LSI Logic ParallelC. LSI Logic SASD. VMware Paravirtual



QUESTION 197

An administrator needs to migrate a company's physical servers to virtual servers and deploy into the ESXi 5.x cluster. During the process of converting to a virtualmachine, the administrator needs to reduce the size of the disks.Which method should the administrator use to meet this requirement?

A. Use VMware Converter hot cloning with volume-based cloning at the file levelB. Shut down the physical server and use VMware Converter cold cloning with volume-based cloning at the block levelC. Use VMware Converter hot cloning with volume-based cloning at the block levelD. Shut down the physical server and use VMware Converter cold cloning with volume-based cloning at the file level



QUESTION 198Which steps should an administrator take to migrate existing ESXi 5.x virtual machines to a storage over-subscription model?

A. Right-click the .vmdk file, and click Deflate.B. Right-click the .vmdk file, and click Compress.C. Right-click the virtual machine, click Migrate, select the same datastore, and select Thin Provision.D. Right-click the virtual machine, click Migrate, select a different datastore, and select Thin Provision.



QUESTION 199An administrator needs to manage a virtual machine that cannot be accessed directly from an external network.Which solution should the administrator choose?

A. Power off the virtual machine and use the vSphere Web Client to open a console to the virtual machine.B. Install the Client Integration Plug-in in the Web browser and open a console to the running virtual machine.C. Install the DCUI plug-in in the Web browser and open a console to the running virtual machine.D. Power off the virtual machine, install the Client Integration plug-in, and open a console to the virtual machine.



QUESTION 200A vSphere administrator deleted a vApp from disk. A second administrator needs the virtual machines that were contained in the vApp.What should the first administrator do to make the virtual machines available?

A. Recover the virtual machines from backupB. Add the virtual machines back into inventoryC. Undelete the vAppD. Recover the virtual machines from Stranded Items



QUESTION 201A vSphere Administrator has a multi-tier application deployed in a vApp. The administrator needs to rapidly deploy copies of the multi-tier application to variousdepartmental infrastructures throughout the company.Which step should the administrator take using the vSphere Web Client to allow this?

A. Export the vApp as an OVF TemplateB. Convert the vApp to a TemplateC. Clone the vApp to a OVF TemplateD. Add the vApp to the Catalog



QUESTION 202The bandwidth between two sites is too slow to transfer large virtual machine files. The administrator needs to export a virtual machine to OVF to reduce the size ofthe transfer. When the administrator attempts to initiate the Export OVF Template feature, the selection is grayed out.What is the likely reason that the administrator is unable to select this option?

A. The virtual machine is in a powered on state.B. There is not enough disk space on the destination for the OVF.C. The administrator's account does not have the correct privileges.D. The virtual machine is not compatible with the OVF format.



QUESTION 203A system administrator is deploying a Windows virtual machine from a template and needs the IP address to be customized automatically.

How should the administrator configure the IP address?

A. Use the Microsoft Sysprep Tool.B. Specify IP addresses using the Deploy Virtual Machine Wizard.C. Use the VMware Quickprep Tool.D. Manually configure IP addresses after the deployment has completed.



QUESTION 204An administrator needs to establish that a database server is entitled to twice the CPU resources than a web server during CPU resource contention.

Which settings should the administrator change to accomplish this?

A. Set the database server's CPU Shares to High and leave the web server's CPU Shares at Normal.B. Set the database server's CPU Shares to High and change the web server's CPU Shares to Low.C. Set the database server's Shares to High and change the web server's CPU Shares value to a custom value of 500.D. Set the database server's Shares to a Custom value of 500 and leave the web server's CPU Shares at Normal.



QUESTION 205What should an administrator do to identify compliance for virtual machine storage performance?

A. Create a Storage Policy and apply it to the virtual machineB. Create Storage Capabilities and apply one or more capabilities to the virtual machineC. Create a Storage Policy and apply it to the datastore containing the virtual machineD. Create Storage Capabilities and apply one or more capabilities to the datastore containing the virtual machine



QUESTION 206During a physical network reconfiguration, an ESXi host briefly lost connection to the management network. High Availability (HA) began powering off the virtualmachines residing on the affected host to be restarted on an unaffected host in the cluster. Which setting should the administrator configure to prevent thisbehavior in the future?

A. Host isolation responseB. Host monitoringC. VM monitoringD. Admission control

Correct Answer: A



QUESTION 207A vSphere administrator needs to increase the capacity of an existing Storage Distributed Resource Scheduler (SDRS) datastore cluster. The storage administratorhas provisioned two new NFS datastores to be added to the cluster.The vSphere administrator receives an error message, preventing the administrator from adding the newly provisioned datastores to the cluster.What is the likely reason that the action failed?

A. There are virtual machines running on the datastores being added to the cluster.B. The datastores in the SDRS cluster are VMFS datastores.C. The datastores in the existing cluster have hardware acceleration enabled and the new datastores do not.D. The SDRS cluster has not been placed into maintenance mode.



QUESTION 208A Distributed Resource Scheduler (DRS) cluster is displaying a message that recommends the migration of virtual machines, even though the cluster is currentlybalanced.What is the likely reason for this?

A. The DRS cluster does not satisfy the resource pool reservations.B. The DRS cluster is not configured with shared storage.C. The DRS cluster is in a critical state.D. The DRS cluster contains hosts with CPU compatibility issues.



QUESTION 209Which workflow should the administrator follow to create a High Availability (HA) cluster?

A. Select a datacenter, create a cluster in the datacenter, add resources to the cluster, enable HA, and configure HA-specific settingsB. Select a resource pool, create an HA Cluster in the resource pool, add resources to the cluster, configure HA-specific settings, and enable HAC. Select a datacenter, create an HA Cluster, add resources to the cluster, configure HA-specific settings, and enable HAD. Select a resource pool, create a cluster in the pool, add resources to the cluster, enable HA, and configure HA-specific settings



QUESTION 210A vSphere administrator attempts to move a powered on virtual machine into a resource pool that is configured in an HA/DRS cluster. The operation fails.What condition would cause this behavior?

A. HA admission control prevented the movement of the virtual machine due to insufficient resources.B. Resource pool admission control prevented the movement of the virtual machine due to insufficient resources.C. The virtual machine was not powered off before being moved into the resource pool.D. The virtual machine's hardware level did not match the level of the existing virtual machines in the resource pool.



QUESTION 211An administrator removes a virtual machine from a resource pool and places it in the DRS root resource pool. Users report the performance of the applicationrunning on the virtual machine has improved. The virtual machine relocation was the only change that occurred. What explains the change in applicationperformance?

A. The memory, storage, and/or CPU settings of the original resource pool restricted access to resources for the virtual machine.B. The configured memory, storage and/or CPU shares on the root resource pool are higher than the original resource pool.

C. The memory, storage and/or CPU settings on the root resource pool restricted access to resources for the virtual machineD. The configured memory storage and/or CPU reservations on the root resource pool are higher than the original resource pool.



QUESTION 212An application team is implementing a new solution in the virtualized environment. The application vendor states the application is memory intensive. Theapplication is very unstable when operating without adequate on-demand access to physical memory. The application's virtual machines are assigned to theMission Critical resource pool. Which resource pool setting will help ensure the application has adequate access to memory?

A. Memory reservationB. High memory share valueC. Unlimited memoryD. Expandable reservation



QUESTION 213What will cause the validation of a vMotion migration to fail?

A. A virtual machine configured for CPU affinityB. A virtual machine configured with a local .vswp fileC. A virtual machine configured to use NUMAD. A virtual machine configured with a shared Raw-Device Mapped disk



QUESTION 214A vSphere administrator is attempting to migrate a virtual machine, but the progress bar for the migration remains at 10%.Which issue could be preventing the vMotion migration?

A. A networking problem between the source and destination hosts exists at the physical layer.B. The virtual machine is not on shared storage visible to the source and destination hosts.C. The vMotion migration priority for this migration was set to High.D. The vMotion network is saturated.



QUESTION 215An administrator needs to migrate a virtual machine from one datastore to another, but the virtual machine has a snapshot. The virtual machine is running on anESXi 5.x host. Which action must the vSphere administrator take to ensure that the snapshot data remains intact?

A. Perform a standard Storage vMotion migration.B. Consolidate the snapshot and then perform a Storage vMotion migration.C. Perform a Storage vMotion migration and then copy the snapshot file to the new location.D. Delete the snapshot and then perform the Storage vMotion migration.



QUESTION 216How is changed block tracking (CBT) used in a vSphere implementation?


A. CBT is used by the VMkernel to reduce time needed for virtual machine copy operations.B. CBT is used by VMware Data Protection (VDP) to reduce time needed for backup jobs.C. CBT is used by vCenter Server to reduce the size of snapshots.D. CBT is used by vSphere Replication for synchronous replication operations.



QUESTION 217Which vSphere feature creates a copy of a virtual machine that can be stored locally within a cluster or at another site, and provides the ability to rapidly restore avirtual machine within minutes?

A. vSphere Data ProtectionB. vSphere ReplicationC. vSphere SnapshotsD. vSphere Heartbeat



QUESTION 218An administrator is attempting to use Update Manager to patch a cluster of ESXi 5.x hosts. The administrator needs to stage the patches for a scheduled update

after hours. When verifying the hosts after the scheduled upgrade, the administrator determines that one of the hosts was not remediated and patches are notstaged. The host is using PXE as its boot method.What condition would cause this behavior?

A. The host was rebooted prior to the scheduled remediation.B. Remediating PXE-booted hosts using Update Manager is unsupported.C. The user account used does NOT have the Remediate Hosts privilege.D. The RAMdisk on the host has insufficient capacity.



QUESTION 219The administrator has deployed a third-party virtual appliance in the organization's vSphere environment and needs to use Update Manager to maintain the third-party appliance. How should the administrator accomplish this task with the least administrative effort?

A. Add a new Download Source to Update Manager to obtain updates from the third partyB. Manually download the third-party updates to Update Manager, which will then apply them to the applianceC. Obtain an update tool from the third party and use it to manage updates to the applianceD. Identify the third-party appliance from the supported list within Update Manager



QUESTION 220For security reasons, SSH and the ESXi Shell have been disabled on a standalone ESXi 5.x host. A vSphere administrator accesses the Direct Console UserInterface (DCUI) to examine log files related to a recent connection issue.Which system log can the administrator access to determine the cause of the issue?

A. syslogB. fdm

C. messagesD. vmksummary



QUESTION 221An administrator needs to export system logs for an ESXi 5.5 host to determine the root cause for a host performance issue. This host supports manifest-drivenexports of system logs. Which manifest is selected by default during the export system log wizard?

A. UserworldB. HostworldC. PerformanceSnapshotD. HungVM



QUESTION 222An ESXi 5.x host disconnects within 60 seconds after the administrator adds it to the vCenter Server inventory. The administrator determines that the issue couldbe related to a networking problem. Which networking port should the administrator check for connectivity from the host to vCenter Server?

A. 902B. 903C. 443D. 9443



QUESTION 223An administrator adds an ESXi 5.x host to the inventory of a vCenter Server that is configured with a vSphere Distributed Switch. The vSphere Web Client indicatesthat the host is not responding. The administrator determines from the command line that the vpxa agent is stopped. What should the administrator do to resolvethis issue without affecting the uptime of the virtual machines running on the host?

A. Restart the management agents in the host's DCUIB. Remove and re-add the host to the vCenter inventoryC. Restart the vCenter Server serviceD. Type /etc/vmware/vpxa start from the ESXi command line




-- Exhibit --

An ESXi host's networking is configured as shown. The virtual machine named Fileserver01 is unable to ping anything on an external network:

Which condition would explain this behavior?

A. The vSwitch1 virtual switch does not have an attached vmnic adapter.B. The Fileserver01 virtual machine is not running.C. vSwitch0 is configured to reject MAC address spoofing.D. vmk0 is using a non-routable IP address.



QUESTION 225An administrator is performing upgrades to ESXi 5.x from ESX 3.x and ESX 4.x hosts. What is true about this procedure?

A. A direct, in-place upgrade can be performed only on ESX 4.1 and later hosts.B. ESX 3.x hosts can be upgraded, but require an upgrade to 4.x before 5.x.C. A direct, in-place upgrade can be performed only on ESX 4.5 and later hosts.D. A direct, in-place upgrade can be performed only on ESX 3.5 and later hosts.


Explanation/Reference:You must upgrade version 3.x ESX and ESXi hosts to ESX or ESXi version 4.x before you can upgrade them to ESXi 5.1.x. See the vSphere 4.x upgradedocumentation.

Alternatively, you might find it simpler and more cost effective to do a fresh installation of ESXi 5.1.x.

QUESTION 226What differentiates a private cloud from a vSphere Infrastructure?

A. A private cloud requires pooled resources including storage and networking.B. vSphere Infrastructure assumes a secure location for the workloads.C. vSphere Infrastructure allows consumption of resources over open standards.D. A private cloud assumes the consumer will maintain their portion of the infrastructure.


Explanation/Reference:Since private cloud requires pooled resources which includes storage and networking, it is different from vSphere infrastructure that doesn’t require pooledresources.

QUESTION 227What are three reasons for deploying vCenter Server in a physical machine? (Choose three.)

A. vCenter Server can be deployed as physical machine to support a VSA configuration.B. vCenter Server can be deployed as a physical machine to ensure it is not susceptible to vSphere outages.

C. vCenter Server can be deployed as a physical machine to improve VMware Data Recovery performance.D. vCenter Server can be deployed as a physical machine to improve vMotion performance.E. vCenter Server can be deployed as a physical machine to ensure it does not contend for resources.

Correct Answer: ABESection: (none)Explanation

Explanation/Reference:VCenter server can be deployed as a physical machine so that VSA configuration can be supported and ensures it is not susceptible to vsphere outages. It canalso be deployed as physical machine to make sure it does not content for virtual resources.

QUESTION 228Which two VMware software components can be updated by Update Manager? (Choose two.)

A. ESX 3.5B. Virtual AppliancesC. vCenter ServerD. Guest OS


Explanation/Reference:http://www.vmware.com/support/vsphere5/doc/vsphere-update-manager-51-release-notes.html

QUESTION 229Which two vCenter plug-ins are installed with a default vSphere Client installation? (Choose two.)

A. vCenter Hardware StatusB. VMware ESXi Service StatusC. VMware vSphere Update ManagerD. VMware vCenter Storage Monitoring Service


Explanation/Reference:http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-51-host-management-guide.pdf (page 19, first para)

QUESTION 230What are two reasons why a company would choose to use ESXi 5.x instead of using VMware Workstation 8? (Choose two.)

A. The company needs to be able to assign existing physical disks to virtual machines.B. The company needs remote management of virtual machinesC. The company needs support for virtual machines with up to sixteen vCPUsD. The company wants the lowest overhead possible for the virtual infrastructure.


Explanation/Reference:ESXi 5.x is diverse and supports remote management of virtual machines whereas VMware workstation 8 is end-user software that provides virtualization.Moreover, the overhead costs of operating a workstation 8 are far greater than operating a server with ESXi 5.x.

QUESTION 231Which two settings are required by the deployment wizard when installing the VMware vCenter Server Virtual Appliance (vCSA)? (Choose two.)

A. Number of CPUsB. Datastore to install onC. Linked-modeD. Name of the vCenter server


Explanation/Reference:http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc%2FGUID-25FCBA87-5D2F-4CB6-85D7-88899B4AC174.html

QUESTION 232Which three modules are optional components that can be added from the vCenter Server installer? (Choose three.)

A. VMware vCenter Syslog CollectorB. VMware vCenter License Server

C. VMware vSphere Authentication ProxyD. VMware vCenter Host Update UtilityE. VMware vSphere Auto Deploy

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-78933728-7F02-43AF-ABD8-0BDCE10418A6.html ( seeoptional components)

QUESTION 233What are two prerequisites for installing the vCenter Server application? (Choose two.)

A. The system vCenter Server is installed on must be a physical machine.B. A valid vSphere vCenter license must be obtained before installation.C. vCenter must be in the same network as the hosts if supporting vSphere Storage Appliance Cluster.D. The system vCenter Server is installed on cannot be a domain controller.


Explanation/Reference:https://pubs.vmware.com/vsphere-4-esx-vcenter/index.jsp?topic=/com.vmware.vsphere.installclassic.doc_41/common/install/c_vc_pre.html

QUESTION 234What are two valid use cases for vCenter Server Linked Mode? (Choose two.)

A. An administrator wants to migrate running virtual machines between vCenter Server instances.B. An administrator wants to increase the vRAM entitlement pool.C. An administrator wants to manage a virtual server environment and a View environment from the same pane of glass.D. An administrator wants to search all inventory objects across multiple vCenter Server Virtual Appliance (vCSA) instances from one vSphere Client


Explanation/Reference:http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-host-management-guide.pdf (page 53)

QUESTION 235An administrator is setting up vSphere Auto Deploy to deploy 25 ESXi 5.x hosts using the vCenter Server Virtual Appliance (vCSA). What would be considered bestpractices for Auto Deploy? (Choose three.)

A. Enable vSphere HA on the cluster.B. Protect the vCenter server with Fault Tolerance.C. Install the Auto Deploy service on the VCSA.D. Include the vmware-fdm VIB in the image profile.E. Use PowerCLI to write a rule that assigns a custom image profile to the target hosts.

Correct Answer: ADESection: (none)Explanation

Explanation/Reference:http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-980D9E38-633E-4557-9144-AC422FA239C5.html

QUESTION 236Which tool defines the Image Profiles used with Auto Deploy?

A. The vSphere PowerCLI add-deployrule cmdletB. The vSphere PowerCLI new-deployrule cmdletC. The vSphere CLI add-deployrule commandD. The vSphere CLI new-deployrule command


Explanation/Reference:http://www.vmware.com/files/pdf/techpaper/Whats-New-VMware-vSphere-50-Platform-Technical-Whitepaper.pdf (page 9, auto deploy rules engine)

QUESTION 237An administrator plans to use an upgrade script to upgrade a number of ESXi 5.x hosts.

What options are available for the kickstart file? (Choose two.)

A. dryrun - Parse and check script but does not installB. overwritevmfs - permits overwriting of existing VMFS volumesC. vcenter - specifies vCenter ServerD. autodeploy - defines autodeploy options


Explanation/Reference:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004582

QUESTION 238A security audit has revealed that a virtual machine on vSwitch1 is receiving all traffic sent to the virtual switch, violating corporate policy. The vSphereadministrator examines the properties for vSwitch1, as shown in the exhibit:-- Exhibit --

-- Exhibit --

Which configuration explains why the virtual machine is receiving all traffic sent to vSwitch1?

A. The Production port group has the Promiscuous Mode policy set to Accept.B. vSwitch1 has the Promiscuous Mode policy set to Reject.C. The Network Failure Detection policy on the Production port group is set to Link Status plus Beaconing.D. The Network Failure Detection policy on vSwitch1 is set to Link Status only.




-- Exhibit --

An administrator receives notice of a large number of ARP table issues. The issues began after a maintenance window 36 hours ago. The issue did not exist priorto the maintenance window.

Which change was made to the port group that is causing the ARP table issue?

A. Notify Switches was changed to No.B. Uplink 2 was changed from Standby to Active.C. Failback was changed to Yes.D. Network failure detection was changed to Link status only.

-- Exhibit --

A vSphere administrator attempts to manually vMotion a virtual machine but receives error messages related to the Shared Storage datastore shown in the exhibit.

The administrator uses the vSphere Web Client and locates the datastore settings shown:

Which action should the administrator take to resolve these errors?

A. Reconnect server3 to the vCenter server.B. Select server3 and click Mount.C. Remove server3 from the cluster then re-add it.D. Right-click Not connected and select Connect.



QUESTION 241A SAN administrator recently installed a storage encryption switch on the Fibre Channel Fabric. Shortly after the deployment, several new VMFS5 datastoresrecently created were dismounted. Attempts to manually mount them fail. VMFS5 upgraded datastores are unaffected. All Storage arrays in use support VASA andVAAI.

What is the root cause of this problem?

A. All newly created VMFS5 datastores are tagged ATS_Only. The storage encryption switch blocks the ATS command.B. All newly created VMFS5 datastores are tagged XCOPY_Only. The storage encryption switch blocks the XCOPY command.C. All newly created VMFS5 datastores are tagged WRITE_SAME_Only. The storage encryption switch blocks the WRITE_SAME command.D. All newly created VMFS5 datastores were formatted with 1MB block size. The storage encryption switch does not support this block size.



QUESTION 242An administrator is using esxtop to troubleshoot a storage performance issue. Which parameter should the administrator check to monitor any storage-relatedvSphere overhead?

A. DAVGB. KAVGC. GAVGD. CMDS



QUESTION 243An error occurs while building a new virtual machine with a thin provisioned virtual disk size of 20GB. The datastore has 35GB of free space. The datastore isovercommitted by 95GB.


What is preventing the virtual machine from being built?

A. The datastore is built on a thin provisioned LUN that has run out of storage array free space.B. The datastore has reached the maximum overcommitment threshold.C. The virtual disk used by the virtual machine cannot be thin provisioned on this datastore.D. The virtual disk used by the virtual machine requires more free space than is available in the datastore.



QUESTION 244

A vSphere administrator enables and configures a Software iSCSI Initiator, and configures an iSCSI vmkernel portgroup with Port Binding. The SAN administratorcreates a few LUNs on an iSCSI server. However, when the vSphere administrator adds the IP address of the iSCSI server in the Dynamic Discovery list, no iSCSItargets are detected.What condition would result in this behavior?

A. The iSCSI vmkernel portgroup and the iSCSI server are on different subnets.B. The iSCSI server IP address should be entered in the Static Discovery instead of Dynamic Discovery list.C. The network card bound to the iSCSI portgroup is 1Gbps Ethernet instead of 10Gbps.D. A Software iSCSI Initiator cannot use Port Binding in conjunction with Dynamic Discovery.



QUESTION 245A vSphere administrator configures a preferred heartbeat datastore in an HA/DRS cluster configuration. The vCenter Server identifies an alternative preferreddatastore. Why would vCenter Server identify an alternative preferred datastore over the administrator's preference?

A. The selected datastore contains powered-on virtual machines.B. The selected datastore is formatted with a 1 MB block size.C. The selected datastore is an NFS datastore.D. The selected datastore is not accessible to all of the hosts.



QUESTION 246The load is high on a HA/DRS cluster. DPM is enabled. A vSphere administrator determines that hosts are NOT powering on automatically to support the load.Which configuration would result in this condition?

A. VM-to-VM or VM-to-Host DRS rules have been configured that restrict where some VMs can be moved.B. DPM has been set to the most Conservative threshold.

C. Some of the virtual machines have been removed from HA consideration by the vSphere administrator.D. DRS is set to Manual Automation.



QUESTION 247A virtual machine fails to migrate during a Storage DRS event.What could cause this issue?

A. Storage DRS is enabled for the datastore cluster but disabled for the virtual disks.B. Storage DRS is enabled, but vMotion is disabled for the affected virtual machine.C. The vMotion network used for Storage DRS is down for a host in the cluster.D. Storage DRS is attempting to migrate the virtual machine between VMFS and NFS datastores.



QUESTION 248The load on a Fully Automated HA/DRS cluster is critically unbalanced.What condition could cause this issue?

A. DRS is disabled on one or more virtual machines.B. The migration threshold is set to Moderate.C. Storage vMotion is not enabled on the cluster.D. Storage DRS is disabled on the datastore hosting the cluster's virtual machines.



QUESTION 249A vSphere administrator determines that more metrics are available for viewing in the realtime view than are available in the daily view for a virtual machine. Whatis the reason for this discrepancy in the number of available metrics?

A. The daily view does not contain all of the metrics that the realtime view does.B. The default vCenter statistics level is being used.C. A vCenter statistics level of 4 is being used.D. The daily view presents a different selection of metrics by default than presented by the realtime view.



QUESTION 250A VMware administrator determines that the active memory on an ESXi 5.x host is 20% and the consumed memory is 90%.

How much host memory is available to virtual machines?

A. 80%B. 10%C. 70%D. 20%



QUESTION 251The vSphere administrator needs to check the system health of an ESXi 5.x host using the vSphere Web Client. Which option in the Monitor tab should theadministrator use for the selected host?

A. PerformanceB. Hardware ReportsC. Storage StatusD. Issue Log



QUESTION 252A vSphere administrator needs to configure the environment to send a notification to a monitored email address every time a vSphere alarm is triggered. Whichprocedure should the administrator use to accomplish the task?

A. Use the vSphere web client to configure the vCenter Server SMTP settings. Edit the alarm action to send a notification email.B. Use the vSphere web client to configure the vCenter Server SNMP settings. Edit the alarm action to send a notification email.C. Use the vSphere web client to create a vCenter Server scheduled task that will send a notification email when an alarm is triggered.D. Use the vSphere web client to create a vCenter Orchestrator workflow that will send a notification email when an alarm is triggered.



QUESTION 253Which default alarm definition will send a notification trap if the redundant storage path is lost?

A. Cannot connect to storageB. Datastore removed from hostC. Host storage statusD. Hardware health changed


Explanation



-- Exhibit --

The vCenter Operations Manager dashboard is showing Health issues associated with the selected virtual machine. There have been no availability orconfiguration issues with the virtual machine, and the workload badge is still green:

How should an administrator resolve this issue?

A. Select the Anomalies badge to identify the cause of the abnormal behavior, then take appropriate action.B. Select the Stress badge to identify the cause of the increased stress, then take appropriate action.C. Select the Risk badge, identify the host at risk, and migrate the VM to a host with more resources.D. Select the Risk badge to identify how much time is remaining before CPU resources are gone, then assign more resources.



QUESTION 255Time Remaining, Capacity Remaining, and Stress are minor badges of which major badge in vCenter Operations Manager?

A. HealthB. RiskC. EfficiencyD. Workload



QUESTION 256Which minor badge items make up the Efficiency badge score for an ESXi host in vCenter Operations Manager?

A. Workload, Anomalies, FaultsB. Workload, Stress, DensityC. Time Remaining, Capacity RemainingD. Reclaimable Waste, Density

Correct Answer: DSection: (none)

Explanation


QUESTION 257What are two requirements for a fully functional vSphere HA cluster? (Choose two.)

A. vCenter installed or a vCenter Server Virtual Appliance (vCSA) deployed.B. Access to local storage for each host in the cluster.C. Static IP addresses entered in each hosts file in the cluster.D. A minimum of one VMkernel port per host.


Explanation/Reference:http://www.lazywinadmin.com/2013/03/deploying-and-configuring-vcenter.html

QUESTION 258An administrator is configuring a stretched HA configuration and has HA errors on all of the hosts at the remote site. What can be done to ensure virtual machinesat one site can be restarted at the remote site?

A. Ensure any firewalls between the hosts are allowing port 8182B. Create separate HA clusters at each site and enable Stretch Cluster on eachC. Ensure the latency between the sites is less than 5 millisecondsD. Ensure each site has no more than 4 primary hosts


Explanation/Reference:TO make sure virtual machines can be restarted at the remote site, you need to allow port 8182 between the hosts.

QUESTION 259An administrator notices that when a virtual machine is placed into a resource pool, a warning indicates that the virtual machine will receive a very large percentageof the total shares for memory. Which action can be taken to resolve this problem?

A. Increase the memory resource allocation to the resource pool.B. Increase the share value for the resource pool.C. Change the shares setting from custom to high, medium, or low for the virtual machine.D. Decrease the memory allocation for the virtual machine.


Explanation/Reference:The Memory Resources panel lets you allocate memory resources for a virtual machine and specify reservations, limits, and shares. Symbolic values Low, Normal,High, and Custom arecompared to the sum of all shares of all virtual machines on the server and, on an ESX host, the service console.By decreasing the memory share of a particular system, it receives less memory out of the total available memory.

QUESTION 260Which VMware solution uses the security of a vSphere implementation and provides linked-clone technology to virtual desktops?

A. VMware ACEB. VMware ViewC. VMware WorkstationD. VMware ThinApp


Explanation/Reference:http://www.vmware.com/files/pdf/VMware-View-4-Composer-DS-EN.pdf (page 1, last paragraph)

QUESTION 261An administrator has recently upgraded their Update Manager infrastructure to vSphere 5.x. Several hosts and virtual machines have not been upgraded yet.Which vSphere component when upgraded will have the least impact to the existing environment?

A. Virtual Machine HardwareB. ESX HostsC. VMFS datastoresD. VMware Tools


Explanation/Reference:VMware Tools isn't a single application but a set of drivers, services and user processes that's installed in a guest operating system. They add a wide assortment offunctionality to VMware infrastructures -- everything from improving color depth and video resolution in the vSphere Client to memory optimization.

Typically, an outdated version of VMware Tools doesn't have an immediate impact. But with every update to vSphere, you'll likely have to update VMware Tools onevery virtual machine.

QUESTION 262An administrator is using Update Manager 5.x to update virtual appliances in a vSphere environment. The environment is using the vCenter Server VirtualAppliance (vCSA).What would cause the remediation to fail?

A. Updating of the appliance can only be done if the vCenter Server Virtual Appliance (vCSA) has been put into Maintenance Mode.B. Remediation must be configured on the Appliance Administration page before use.C. Remediation of the vCenter Server Virtual Appliance (vCSA) with Update Manager is not supported.D. Remediation requires the hosts to be connected to vCenter using an IPv4 address.


Explanation/Reference:Update Manager 5.0 does not support virtual machine patch baselines. If a host is connected to vCenter Server by using an IPv6 address, you cannot scan andremediate virtual machines and virtual appliances that run on the host.

QUESTION 263An administrator is working to update the hosts and virtual machines in a vSphere 5.x deployment using Update Manager Baselines.Other than host patches, which three items require a separate procedure or process to update? (Choose three.)

A. Operating system patchesB. Virtual Appliance updatesC. Virtual Machine Virtual Hardware upgradesD. VMware Tools on machines without VMware Tools already installedE. Application patches within the virtual machine


Explanation/Reference:Operating system patches are related to operating system so they need a separate procedure altogether. Same is the case with VMware tools and applicationspatches because applications are stand alone pieces of code that need separate procedure to apply a patch.

QUESTION 264A series of Auto Deploy ESXi 5.x hosts, which utilize vSphere Standard Switches, are unable to boot. In prior testing, all of the hosts were able to boot successfully.Which two conditions might cause this issue? (Choose two.)

A. The Hosts are unable to connect to the SAN.B. The TFTP server is down.C. The DNS server is down.D. The DHCP server is down.


Explanation/Reference:If the TFTP server is down, ESXi will not boot because it needs TFTP to get the information. Similarly, when DHCP is down, it will not assign the IP addresses andESXi needs IP address to boot properly.

QUESTION 265An administrator wants to monitor the health status of an ESXi 5.x host. However, when the administrator clicks the Hardware Status tab the following error isdisplayed.This program cannot display the webpageWhat might cause this problem?

A. The VMware VirtualCenter Management Webservices Service is not started.B. The required plug-in is not enabled.C. The VMware ESXi Management Webservices Service is not startedD. The name of the vCenter Server system could not be resolved.


Explanation/Reference:Verify that the VMware VirtualCenter Management Webservices service is running on the vCenter Server system. Navigate to the vCenter Server system in theinventory and select Monitor > Service Health. The page displays the following message if the VMware VirtualCenter Management Webservices service is notstarted.Could not get vCenter Health statusIf you see this error message, start the VMware VirtualCenter Management Webservices service.

QUESTION 266An administrator would like to have vCenter take action any time a virtual machine is using over 90% of its available resources for five minutes or longer.

Which three actions can be taken by vCenter Server in response to the trigger without running a script? (Choose three.)

A. Power on a VMB. Reboot Guest on VMC. Increase Virtual Machine MemoryD. Migrate a VME. Increase Virtual Machine CPU Shares

Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:Power on a VM, reboot guest and Migrate a VM will be the actions taken by vCenter Server in response to a trigger without needing a script.

QUESTION 267An administrator has purchased a new 10GB Converged Network Adapter (CNA) for installation in a system that is running ESXi 5.x. The administrator hasdownloaded the latest driver from the hardware vendor and wants to include the driver in an image. The image profile acceptance level is set to VMwareSupported.The acceptance level of the driver is VMwareSupported.

Which two statements are true about the inclusion of this driver in the image? (Choose two.)

A. Support calls for the driver will be directed to the partner.B. The image can be built, but the driver will not be included in the image.C. The image can be built and the driver will be included.D. Support calls for the driver will be handled by VMware.

Correct Answer: AC


Explanation/Reference:The acceptance level of all VIBs on a host must be at least as high as the host acceptance level. For example, if the host acceptance level is VMware Accepted,you can install VIBs with acceptance levels of VMware Certified and VMware Accepted, but you cannot install VIBs with acceptance levels of Partner Supported orCommunity Supported. To install a VIB with a less restrictive acceptance level than that of the host, you can change the acceptance level of the host by using thevSphere Client or by running esxcli software acceptance commands. Setting host acceptance levels is a best practice that allows you to specify which VIBs can be installed on a host and used with an image profile, and the level ofsupport you can expect for a VIB. For example, a Community Supported VIB might not be recommended for an ESXi server in a production environment.

http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc_50%2FGUID-27BBBAB8-01EA-4238-8140-1C3C3EFC0AA6.html

QUESTION 268What are the three service offerings provided by a VMware-powered public cloud? (Choose three.)

A. CommittedB. TransientC. DedicatedD. Highly ElasticE. Basic


Explanation/Reference:http://www.vmware.com/files/pdf/cloud/VMware-ServiceDef-Public-Cloud-11Q1-White-Paper.pdf (page 6, see service offerings)

QUESTION 269An administrator has been tasked with upgrading an existing host from ESX 4.1 to ESXi 5.x. The existing host has only vSwitch0 with all the default settings.

The upgraded host will have the following new requirements: 1. 116 virtual machines will be connected.2. Four uplinks configured for port-based load balancing.3. The switch will include a secondary heartbeat network for HA.

Which two statements are true about this configuration? (Choose two.)

A. The Service Console Port will be removed during the upgrade

B. The configuration requires only one VMkernel PortC. The default vSwitch0 is sufficient for this configurationD. A change to vSwitch0 Properties is required


Explanation/Reference:VMware has removed the service console port group with the release of vSphere 5. You can execute the same command, which you used to do on vSphere 4service console using vMA, CLI and PowerCLI.

QUESTION 270When would a license server be configured for vCenter Server 5.x?

A. When managing ESX 3.x serversB. When the vCenter Server Virtual Appliance (vCSA) is usedC. Within the first 60 daysD. A standalone license server is installed by default



QUESTION 271What two Advanced IP Allocation Schemes are available? (Choose two.)

A. FixedB. DHCPC. OVF EnvironmentD. Transient


Explanation/Reference:http://www.vmwarehub.com/Edit-vApp-settings.html

QUESTION 272A company is planning an upgrade from vSphere 4.x to vSphere 5. They currently have three dual CPU servers licensed for ESXi 4.1 AdvancedEach server has 256GB of RAM installed.

Their virtual machines are sized three ways.Light. 1v CPU, 4GB RAMMedium. 2v CPU, 8GB RAMHeavy. 4 vCPU, 12GB RAM

The Production workload consists of.20 Light servers20 Medium servers2 Heavy servers

The Development workload consists of.10 Light servers10 Medium servers

How will vSphere 5 licensing impact their upgrade? (Choose two.)

A. They will need to purchase additional ESXi licenses.B. They will be able to reduce their power consumption.C. They will be restricted from powering on additional virtual machines.D. A license upgrade will be needed to add vCPUs to the Heavy servers.


Explanation/Reference:http://www.gabesvirtualworld.com/vsphere-5-licensing-with-vram-isn%E2%80%99t-that-bad-at-all/

QUESTION 273What is a benefit of vCenter Linked-Mode?

A. Allows the vCenter Server Virtual Appliance (vCSA) to manage multiple sitesB. Pools vRAM entitlement

C. Increases vCenter securityD. Increases vCenter reliability


Explanation/Reference:http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.vcenterhost.doc_50%2FGUID-EC40636E-0DD4-4A17-B163-5CFBDC31666C.html

QUESTION 274What virtual machine action listed below can be performed on a template?


A. Power onB. CloneC. Edit SettingsD. Migrate


Explanation/Reference:http://robertparten.com/vmware-difference-between-clone-and-template/

QUESTION 275Which functions can be performed with the Plug-in Manager? (Choose two.)

A. Enable an installed plug-inB. Remove permissions for a plug-inC. View the status of installed plug-ins

D. Uninstall a plug-in


Explanation/Reference:http://www.kumatech.ca/download/docs/110_6081-EN_R3_HIT_VE_Installation_Guide_web.pdf (page 13)

QUESTION 276An administrator plans to deploy ESXi 5.x, but does not want to use CD or DVD media.

What are two alternate ways to provide the ESXi 5.x installation script to the host? (Choose two.)

A. PXEB. FTPC. HTTPD. IPMI


Explanation/Reference:ESXi 5.x allows you to use FTP and HTTP to provide installations script to the host if you don’t want to use DVD or other media.

QUESTION 277Click the Exhibit button.

An administrator has implemented a new vSphere 5 environment and is deploying their first Windows 2008 R2 template. When running the Deploy Template

wizard, the error shown in the exhibit appears.

What can be done to correct the problem?

A. Select the correct guest OS setting for the virtual machine.B. Windows 2003 x64 cannot be customized.C. Download and install the Microsoft Sysprep tool into the virtual machine to be customized.D. Download the Microsoft Sysprep tool to the appropriate vCenter Server directory.

Correct Answer: Section: (none)Explanation

Explanation/Reference:http://communities.vmware.com/thread/45830

See the table at:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005593

QUESTION 278What is a valid example of a vSphere Update Manager upgrade?

A. A VMware Tools upgrade on a Fault Tolerant machine with automatic snapshots.B. Upgrading and patching multiple ESXi hosts simultaneously in a selected cluster.C. Upgrading an ESX 4.1 host to ESXi 5.x with a sufficient boot partition.D. An ESXi 5.x host update with automatically deleted snapshots.


Explanation/Reference:http://www.vmadmin.co.uk/vmware/35-esxserver/283-vsphere4to5migrateesx4toesxi5

QUESTION 279Which three tasks can be selected from the home page of an ESXi 5.x host? (Choose three.)

A. Browse objects managed by the host

B. Browse NFS mounts for this hostC. Download VMware vCenter or the vSphere client from vmware.comD. Shutdown or restart the hostE. Download the PowerCLI installer


Explanation/Reference:PowerCLI is an extension, which builds upon Windows Powershell and can be downloaded from www.vmware.com/go/powercli. vSphere Remote CLI is a separateapplication which can be downloaded in Windows, 32-Bit Linux or 64-Bit Linux formats from https://my.vmware.com/web/vmware/details/vcli40/ZCV0YmRkJSpidHdw

So from the options given you can Download VMware vCenter or the vSphere client, browse objects mounted by this host, and browse datastores (which could beNetwork File System (NFS) mounted).

QUESTION 280If you create a custom role and do not assign privileges what system-defined privileges are added? (Choose two.)

A. System.AnonymousB. System.ReadC. System.WriteD. System.Administrator


Explanation/Reference:http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.security.doc%2FGUID-93B962A7-93FA-4E96-B68F-AE66D3D6C663.html

QUESTION 281An administrator has deployed a vCenter Server Appliance to manage a virtual environment.

The administrator has been asked to develop a plan for handling major upgrades to the application.

What should be included in the upgrade plan?

A. Utilize vCenter Configuration Manager to upgrade the vCenter Server in placeB. Install a new vCenter Server and import the information from the existing vCenter ServerC. Install a new vCenter Server over the existing vCenter Server as an in-place upgradeD. Utilize Update Manager to upgrade the vCenter Server in place


Explanation/Reference:Page 131 of vsphere-update-manager-50-install-administration-guide.pdf

NOTEUpdate Manager 5.0 does not support virtual machine patch baselines.If a host is connected to vCenter Server by using an IPv6 address, you cannot scan and remediate virtual machines and virtual appliances that run on the host.Remediation of VMware vCenter Server Appliance is not supported. For more information about upgrading the virtual appliance, see the vCenter Server upgradedocumentation.

Page 56 of vsphere-esxi-vcenter-server-50-upgrade-guide.pdf

Upgrade the VMware vCenter Server ApplianceBecause the VMware vCenter Server Appliance was first released with vSphere 5.0, upgrading the appliance is not required until a future release. This informationhelps you plan for future upgrades.Procedure1. Deploy the new version of the vCenter Server Appliance. The new appliance has a default network configuration, and the vCenter Server service is unconfiguredand disabled.2. Connect to both the old and new appliances in separate browser windows.3. In the Upgrade tab of the new appliance, select destination for the appliance role, and click Set role.4. In the Upgrade tab of the old appliance, select source for the appliance role, and click Set role.5. In each appliance, click Establish Trust. The local appliance key appears.6. In the new appliance, copy the local appliance key.7. Paste the local appliance key into the Remote appliance key field of the old appliance.8. Click Import remote key in the old appliance.9. In the old appliance, copy the local appliance key.10. Paste the local appliance key into the Remote appliance key field of the new appliance.11. Click Import remote key in the new appliance.12. In the new appliance, click Import, and click Start import.The new appliance shuts down the old appliance and assumes the network identity of the old appliance. This process can take several minutes. When the import iscomplete, the new vCenter Server Appliance starts.

QUESTION 282

Which three configuration settings will be migrated when upgrading a host from ESX 4.x Classic to ESXi 5.x? (Choose three.)

A. The SSH configuration in /etc/sshB. The host configuration in /etc/vmware/esx.confC. The NFS configuration in /etc/fstabD. The services information in /etc/servicesE. The licensing information in /etc/licenses/license.conf



Files Migrated During Migration or Upgrade from ESX/ESXi 4.x to ESXi 5.0 This table provides the list of files migrated during upgrade from ESX/ESXi 4.x to ESXi 5.0:File Notes/etc/sfcb/sfcb.cfgCIM ”indication”conf files /etc/ntp.conf /etc/ntp.drift /etc/ntp.keys /etc/syslog.conf Migrated for ESXi, not migrated for ESX./etc/security/access.conf Needed for PAM configurations./etc/security/login.map No comment./etc/sysconfig/network Service Console NICs areconverted to VMkernel NICs./etc/sysconfig/keyboard Any entries not supported will default to English.***/etc/ssh OpenSSH is now included in ESXi 5.0./etc/nsswitch.conf Used generically for various configurations, most helpful for Active Directory authentication./etc/krb.conf Needed for Likewise to have Active Directory support./etc/krb.realms Needed for Likewise to have Active Directory support./etc/krb5.conf Needed for Likewise to have Active Directory support./etc/krb5.acl Needed for Likewise to have Active Directory support./etc/krb5.keytab Needed for Likewise to have Active Directory support./etc/krb5.log Needed for Likewise to have Active Directory support./etc/krb5.mkey Needed for Likewise to have Active Directory support./etc/pam.d/* (Partial) Needed for authentication and authorization.Note: Custom edits made to settings in /etc/pam.d/system-auth in ESX 4.x are reset to the default values by the upgrade to ESXi 5.0. To maintain the custom

values, reset them manually after the upgrade./etc/snmp/snmpd.conf Migrated to /etc/vmware/snmp.xml.etc/motd A note is appended saying the system was upgraded to ESX 5.x./etc/likewise/* Used for Likewise configurations./etc/vmware/vmkiscsid/* ***/etc/vmware/esx.conf /etc/vmware/hostd/* /etc/vmware/vmauth/authentication.conf Used for Likewise configurations/etc/vmware/vmauth/provider.xml Used for Likewise configurations/etc/hosts /etc/resolv.conf ***/etc/fstab (Partial) Only NFS entries will be migrated to ESXi./etc/passwd (Partial) Only the root user password will be saved, if possible./etc/shadow Only the root user password will be saved, if possible

QUESTION 283An administrator is upgrading an ESXi 3.5 host to ESXi 5.x with an intermediate upgrade to 4.0 using Update Manager. The host has a single Intel Xeon processor,4GB of RAM, and a VMFS datastore on a private, SAN-attached LUN. What might cause the upgrade to be unsuccessful?

A. The ESXi host has 4GB RAM.B. The ESXi host has one processor.C. ESXi 3.5 is not supported for upgrade.D. Update Manager cannot upgrade a previously upgraded host.


Explanation/Reference:http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc_50%2FGUID-AA106086-E10D-456E-B0B9-340D3D1462C3.html

QUESTION 284An administrator is performing an upgrade on an ESXi host.

Which step can be used to back up the host before the upgrade is performed?

A. Using the vSphere Client connected to vCenter, right-click the host and choose Host Backup.B. Log into a vMA appliance and run vicfg-cfgbackup to save the ESXi host configuration.C. Using the vSphere Client connected directly to the host, right-click the host and choose Host Backup.D. Use PowerCLI to run the host-backup cmdlet to save the ESXi host configuration.


Explanation/Reference:http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-command-line-interface-solutions-and-examples-guide.pdf(page 22)


10 ESXi 5.x hosts will be installed as part of a vSphere 5.x deployment. Security hardening is required as part of the installation. The current security profile isdisplayed in the exhibit.

Which three services shown in the exhibit are configured to run by default in a completed vSphere installation? (Choose three.)

A. Network Login Server (Active Directory Service)B. SSHC. ESXi ShellD. Direct Console UIE. vpxa


Explanation/Reference:Since Security hardening is required, network login server, direct console UI and vpxa will be run by default.

QUESTION 286For security reasons, an administrator removes a user from the Active Directory domain used by all ESXi hosts for authentication. At the time the user is removedthey are actively logged into an ESXi 5.x host through the vSphere Client.

What is true regarding this scenario?

A. The user immediately loses connectivity to and permissions on the host.B. The user retains permissions and connectivity to the host for up to 24 hours.C. The user retains permissions on the host until the host is rebooted.D. The user retains permissions on the object until the next time the user logs in to vCenter Server.


Explanation/Reference:You can remove a user from the host.Users who are logged in and are removed from the domain keep their host permissions until you restart the host.

To remove users from vCenter Server, you must remove them from the domain or Active Directory users list.

Users who are logged in and are removed from the domain keep their vSphere permissions until the next validation period. The default is every 24 hours.

QUESTION 287Acme Disposal Services is a large company which has many administrators. For auditing purposes, each administrator must use a unique account to access ESXiStandard hosts.Which two actions satisfy this requirement and require the least amount of administrative effort? (Choose two.)

A. Configure Authentication Services for Active Directory based authentication to the ESXi hostsB. Configure a unique root level account for each administrator using the vSphere ClientC. Configure user accounts in a host profile, then apply the host profile to the ESXi hostsD. Configure Active Directory group ESX Admins with each administrator's AD account


Explanation/Reference:http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.pg.doc_50/PG_Ch6_Authenticate_Authorize.8.3.html

QUESTION 288What Windows security object is granted the vCenter Server administrator role during installation?

A. Domain AdminsB. AdministratorC. AdministratorsD. ESX Admins


Explanation/Reference:http://pubs.vmware.com/vsphere-4-esxi-installable-vcenter/index.jsp?topic=/com.vmware.vsphere.esxi_server_config.doc_41/esx_server_config/authentication_and_user_management/c_administrator.html

QUESTION 289Which component is the metering tool for vCloud administration?

A. VMware vCenter Chargeback

B. VMware vCloud Service ManagerC. VMware vCloud Request ManagerD. VMware vCloud Director


Explanation/Reference:VMware® vCenter™ Chargeback Manager™ provides the metering capability to measure, analyze, and report on utilization and costs associated with VMware®-based cloud infrastructures. It offers the ability to configure and associate various cost models with vCloud Director entities. The cost transparency enabled byvCenter Chargeback Manager allows cloud providers to validate and adjust financial models based on resource consumption.

QUESTION 290An existing vSphere 4 environment will be upgraded to vSphere 5.x. The current implementation utilizes ESXi 4.1 and the new implementation will use ESXi 5.x.

In which two ways will the new ESXi 5.x implementation differ from the ESXi 4.1 implementation? (Choose two.)

A. VMware ESXi 5.x provides a host-based firewall.B. VMware ESXi 5.x can boot from additional local sources such as a USB drive.C. VMware ESXi 5.x can be managed from a web browser.D. VMware ESXi 5.x can support virtual machines with larger hard drive configurations.


Explanation/Reference:Of many features, ESXi5.x can boot from various local sources like a USB drive and it can support virtual machines with large hard drive configurations.

QUESTION 291Which VMware solution allows for the automated discovery and mapping of applications running over the VM infrastructure?

A. VMware vCloud DirectorB. VMware vCenter Infrastructure NavigatorC. VMware Service ManagerD. VMware vSphere 5

Correct Answer: B


Explanation/Reference:http://www.vmware.com/products/datacenter-virtualization/vcenter-infrastructure-navigator/features.html

QUESTION 292What are two reasons to upgrade a virtual machine's hardware version? (Choose two.)

A. Migrate a virtual machine from a VMFS3 datastore to a VMFS5 datastore.B. Add more than 4 NICs to a virtual machine.C. Add more than 8 vCPUs to a virtual machine.D. Increase the vRAM of the virtual machine to 512GB.


Explanation/Reference:There are many reasons to upgrade. A couple of them are that you want to add more than 8 vCPUs to a virtual machine or you want to increase the vRAM of avirtual machines to 512 GB.

QUESTION 293The Typical option is selected while running the New Virtual Machine Wizard in the vSphere Client. Which three specific configuration options are included duringvirtual machine creation? (Choose three.)

A. Datastore locationB. Virtual machine versionC. Number of vCPUsD. Storage DRSE. Virtual disk size


Explanation/Reference:http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-virtual-machine-admin-guide.pdf

QUESTION 294The VMware vCenter Server Appliance has been deployed using default settings.

What user name and password are used to log in to the administration interface to configure the appliance?

A. The initial user name and password must be supplied on the first login attempt.B. The initial user name and password must be supplied during deployment.C. The initial user name is root and the password is blank.D. The initial user name is root and the password is vmware.


Explanation/Reference:Default user name and password is root and vmware respectively. This is a norm with VMware since they are easy to remember. However, it is advised to changeusername and password once you are done with installing the vcenter server.

QUESTION 295Which scenario requires an additional database server when adding vSphere Update Manager 5 to an environment?

A. vCenter Appliance with an external Oracle databaseB. vCenter Application with the default databaseC. vCenter Application with an external SQL 2008 Enterprise databaseD. vCenter Appliance with an external DB2 database



QUESTION 296Which are three of the steps recalled patches automatically go through in vSphere Update Manager? (Choose three.)

A. Delete recalled patch binary from repositoryB. Remediate any host with recalled patchesC. Generate a notification in the notification tab

D. Place hosts with recalled patches in maintenance modeE. Flag recalled patch in database


Explanation/Reference:http://www.dianaromeo.info/virtualizacion/vmware/vsphere/update-manager

QUESTION 297What is the default VFAT scratch partition size for ESXi 5.x?

A. 4GBB. 600MBC. 544MBD. None


Explanation/Reference:http://thinkcloud.nl/2011/06/29/esxi-scratch-partition/

QUESTION 298The VMware vCenter Server Appliance offers many features of the Windows application version. Which of the following features is only available on the Windowsapplication version of vCenter?

A. Host ProfilesB. Template and clone customizationC. Active Directory authenticationD. Linked Mode



Linked mode is available in Windows Application version of vCenter only in vcenter server 4.x. It is not available in vCenter Server 5.x

QUESTION 299An iSCSI array is being added to a vSphere 5.x implementation. An administrator wants to verify that all IP storage VMkernel interfaces are configured for jumboframes.What are two methods to verify this configuration? (Choose two.)

A. Run the esxcli network ip interface list commandB. Run the esxcfg-vswif -l commandC. Ensure that the Enable Jumbo Frames box is checked in the VMkernel interface properties in the vSphere clientD. Ensure that the MTU size is set correctly in the VMkernel interface properties in the vSphere client


Explanation/Reference:You have to run esxcli network ip interface list command to list all the IPs. Then you need to make sure that MTU size is correctly set in the VMkernel interfaceproperties in the vsphere client.

QUESTION 300An administrator has configured a vSphere Distributed Switch to send all network traffic to a collector virtual machine for analysis. However, after checking thecollector virtual machine several hours later the administrator finds that no data has been collected. vSphere 5.x has been deployed in the datacenter.

Which two items below could be causing this issue? (Choose two.)

A. The source virtual machine does not have Promiscuous Mode enabled.B. The source and target virtual machines are not both the same on the vSphere Distributed Switch.C. The port group or distributed does not have Promiscuous Mode enabled.D. The port group or distributed port does not have NetFlow enabled.


Explanation/Reference:Requirements for a collector virtual machine to analyze traffic from a vSphere Distributed Switch: 1) The source and target virtual machines must both be on avNetwork Switch, but can be on any vDS datacenter. 2) The port group on distributed port must have NetFlow enabled.Two methods to migrate a virtual machine from a vSphere Standard Switch (VSS) to a vSphere Distributed Switch (VDS): 1) Migrate the port group containing thevirtual machine from a vNetwork Standard Switch using the Migrate Virtual machine networking option. 2) Edit the Network Adapater settings for the virtual

machine and select a dvPort group from the list.

QUESTION 301An administrator is informed that there will be a storage maintenance window and that failovers may occur.

What is the expected length of time that a Windows 2008 virtual machine storage I/O will pause during a path failover?

A. 0 to 30 secondsB. 90 to 120 secondsC. 60 to 90 secondsD. 30 to 60 seconds


Explanation/Reference:http://www.vmguru.nl/wordpress/2012/03/set-timeout-on-windows-guest-os-to-avoid-blue-screenserrors/ (3rd para)

QUESTION 302Which resource management technique can be used to relieve a network bottleneck caused by a virtual machine with occasional high outbound network activity?

A. Convert the switch from a vSphere Standard Switch to a vSphere Distributed Switch.B. Create a new portgroup for the virtual machine and enable traffic shaping.C. Apply traffic shaping to the other virtual machines in the same port group.D. Apply traffic shaping to the virtual machine with high activity.


Explanation/Reference:http://www.vmware.com/files/pdf/vsphere-vnetwork-ds-migration-configuration-wp.pdf

QUESTION 303Which two statements are true regarding vSphere standard switches? (Choose two.)

A. Beaconing requires at least three uplinks to be considered useful.B. Virtual machines on different vSwitches require the vSwitches to share an uplink to communicate.

C. vSphere virtual switches require at least one uplink adapter.D. Setting the number of ports to the maximum on a vSwitch will exhaust the total ports on a host.


Explanation/Reference:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005577 http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-networking-guide.pdf

QUESTION 304Which types of traffic can a VMkernel port be enabled to carry on a ESXi 5.x host? (Choose three.)

A. NFSB. Fault TolerantC. ManagementD. iSCSIE. vMotion

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:http://www.epubbud.com/read.php?g=8MVD69ZN&tocp=15

QUESTION 305Networking policies for a vSphere Standard Switch, such as traffic shaping and security, can be overridden on which vSphere elements?

A. On the virtual machineB. On the physical switchC. On the physical network interfaceD. On the port group


Explanation/Reference:http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.networking.doc%2FGUID-3A9D9911-3632-4B81-9D2E-A2F9F2D01180.html

QUESTION 306Which is an important benefit provided by VLANs?

A. Reduced hardware requirementsB. Increased broadcast trafficC. Fault toleranceD. Increased security on a network segment


Explanation/Reference:VLANs are virtual local area networks. They significantly reduce costs by saving money that can be spent on the purchase of switches, hubs and routers.

QUESTION 307When deploying an OVF template, the resulting virtual disk is created in what file format?

A. OVFB. VMDKC. VMXD. VSWP


Explanation/Reference:http://www.vmware.com/technical-resources/virtualization-topics/virtual-appliances/ovf.html

QUESTION 308Assuming that VLANs are not configured, what is true about traffic from a virtual machine connected to a port group on a vSphere Standard Switch with no uplinks?

A. The virtual switch will drop the packets if no uplink is present.B. Virtual machines on any vSphere Standard Switch on the same ESXi host can receive the traffic.C. Virtual machines in any port group on the virtual switch can monitor all of the traffic.

D. vMotion will not migrate any Virtual machines connected to a port group on the virtual switch.


Explanation/Reference:http://www.vmware.com/pdf/vsphere4/r40/vsp_40_esx_server_config.pdf (page 22, bulleted # 9)

QUESTION 309An administrator is enabling Network I/O Control (NIOC) on a vSphere Distributed Switch.

Which types of network traffic can be prioritized with NIOC by default? (Choose three.)

A. FCP TrafficB. NFS TrafficC. Virtual Machine Traffic By Virtual MachineD. iSCSI TrafficE. vSphere Replication (VR) Traffic

Correct Answer: BDESection: (none)Explanation

Explanation/Reference:http://www.vmware.com/products/datacenter-virtualization/vsphere/network-io-control.html#techinical

QUESTION 310When an explicit failover order has been configured on a virtual switch with multiple uplinks, what determines which uplink is used when a failover event occurs?

A. The first available uplink that reports a positive link stateB. The reported uptime for the surviving uplinksC. The next available uplink on the listD. The uplink with the shortest route


Explanation/Reference:The next uplink is used logically when a failover event occurs. The next available uplink on the list will be the new uplink.

QUESTION 311When PSA is coordinating the VMware NMP and any installed third-party MPPs, the MPPs perform which task?

A. Implement logical device bandwidth sharingB. Handle I/O queueing to the logical devicesC. Provide logical device and physical path I/O statisticsD. Manage physical path claiming and unclaiming


Explanation/Reference:http://pubs.vmware.com/vsphere-4-esxi-installable-vcenter/index.jsp?topic=/com.vmware.vsphere.esxi_server_config.doc_41/esx_san_config/common/c_vmware_pluggable_storage_architecture.html

QUESTION 312When creating a dvPort group, which port binding option assigns a port to a virtual machine when the virtual machine is first powered on?

A. Static bindingB. FlexibleC. EphemeralD. Dynamic binding


Explanation/Reference:http://simongreaves.co.uk/blog/distributed-virtual-switch-guide (see port bindings, dynamic)

QUESTION 313In vSphere, a bound physical NIC can be configured to transmit and receive jumbo frames.


What is the default maximum transmission unit (MTU) in vSphere?

A. 1500B. 5500C. 9000D. 9500


Explanation/Reference:http://www.experts-exchange.com/Software/VMWare/A_9132-HOW-TO-Enable-Jumbo-Frames-on-a-VMware-vSphere-Hypervisor-ESXi-5-0-host-server-using-the-VMware-vSphere-Client.html (search for default MTU (Frame) size)

QUESTION 314On which two vSphere elements can traffic shaping be configured? (Choose two.)

A. On a vSphere Distributed Switch dvPort for inbound and/or outbound trafficB. On a vSphere Distributed Switch for inbound and/or outbound trafficC. On a vSphere Standard Switch port group or the entire vSwitch for inbound trafficD. On a vSphere Standard Switch port group or the entire vSwitch for inbound and outbound traffic


Explanation/Reference:http://pubs.vmware.com/vsphere-4-esxi-installable-vcenter/topic/com.vmware.vsphere.esxi_server_config.doc_41/esx_server_config/advanced_networking/t_edit_dvport_policy_traffic_shaping.html

QUESTION 315What would be a valid reason to enable traffic shaping?

A. Limiting the bandwidth of a FTP serverB. Restricting the load on a IDS serverC. Limiting the bandwidth used by an independent hardware iSCSI adapterD. Improving the performance of a CPU-intensive application server


Explanation/Reference:By limiting the bandwidth of a FTP server, you can enable traffic shaping.

QUESTION 316A vSphere 5.x implementation contains two ESXi hosts, ESXi01and ESXi02. There is a virtual machine "VM21" connected to the Production port group on ESXi01.

ESXi01 has the following switch configuration.

vSwitch0, single uplink to 10.1.20.0/24Production port groupVMkernel port for vMotionVMKernel port for management

vSwitch1, single uplink to 10.1.40.0/24Engineering port groupVMKernel port for NFS storage

ESXi02 has the following switch configuration.

vSwitch0, single uplink to 10.1.20.0/24Engineering port groupVMkernel port for vMotionVMKernel port for management

vSwitch1, single uplink to 10.1.40.0/24Production port groupVMKernel port for NFS storage

Which two statements are true about this configuration? (Choose two.)

A. vMotion is not available between the two hostsB. If VM21 is migrated to ESXi02 it will not be available on the networkC. The virtual machine can be vMotion migrated to the target host.D. Broadcasts from the Production port group will not reach the Engineering port group.


Explanation/Reference:If VM21 is migrated to ESXi 02, then according to the information provided, it will not be available on the network. Likewise, broadcasts from production port groupwill not reach engineering port group.

QUESTION 317Which network settings are only available with vSphere Distributed Switches?

A. Jumbo FramesB. PVLANC. Load BalancingD. Promiscuous Mode



QUESTION 318When would an administrator configure the Explicit Failover option for a portgroup created on a virtual switch with multiple uplinks?

A. To manually configure load balancing for the portgroupB. To share uplinks between vSwitchesC. When configuring iSCSI Software Initiator multipathingD. If the physical switch does not support etherchannel or 802.3ad

Correct Answer: C


Explanation/Reference:http://www.epubbud.com/read.php?g=8MVD69ZN&tocp=15 (see the paragraph below figure 5.2)

QUESTION 319Which two features secure the VMkernel? (Choose two.)

A. Memory EncryptionB. Hardware assist virtualizationC. Kernel module integrityD. Trusted Platform Module (TPM)


Explanation/Reference:http://searchvmware.techtarget.com/tip/VMware-ESXi-security-Protecting-VMs-VMkernel-and-the-network (see ‘Guard the VMkernel’)

QUESTION 320A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks. A new uplink is added to the vSwitch.

What is the status of the uplink by default?

A. The uplink is placed in standby mode until it is added to the active NIC team.B. The uplink is marked as active but does not participate in the active NIC team until assigned to a port group.C. The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch.D. The uplink is marked as unused until it is added to the active NIC team.


Explanation/Reference:The new uplink will be marked as active but it cannot use active NIC team until it is added to an existing 802.3ad group on the physical switch. Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01990371/c01990371.pdf (page 26 onwards)

QUESTION 321Which two statements are true regarding vSphere virtual switch uplinks? (Choose two.)

A. vSphere virtual switches do not need to be configured with an uplink.B. Multiple vSphere virtual switches can be configured to use the same uplink.C. vSphere virtual switches must be configured with at least one uplink.D. Multiple vSphere virtual switches cannot be configured to use the same uplink.


Explanation/Reference:VMware Virtual Networking Concepts, page 6. Some virtual switches should not connect to a physical network and thus have no uplink port. If you attempt toassign an uplink port, (previously assigned to a switch), to a second switch, the uplink will be disconnected from the first switch before being connected to thesecond.

QUESTION 322A virtual machine, VM21, will be migrated between two ESXi 5.x hosts, labeled ESXi01 and ESXi02. Each host has two vSphere Standard Switches (vSS),configured as follows: 1. vSwitch0 has a portgroup labeled Management and a portgroup labeled vMotion.2. The Management portgroup contains a vmkernel port tagged for management traffic.3. The vMotion portgroup contains a vmkernel port tagged for vMotion traffic.4. vSwitch0 on ESXi01 has a single uplink attached to the 10.1.20.0/24 network.5. vSwitch0 on ESXi02 has a single uplink attached to the 10.1.20.0/24 network.6. Each host has a vSwitch1 with a Production portgroup used by virtual machine traffic.7. Each vSwitch1 has an uplink attached to the 10.1.40.0/24 network.

What is true about migrating VM21 to the new host?

A. vMotion would be supported in this configuration.B. Storage vMotion would not be supported in this configuration.C. vMotion would not be supported in this configuration.D. Storage vMotion would be supported if the storage device supports VAAI.


Explanation/Reference:As per the configuration shown in the question, vmotion will be supported without any problem.


An administrator has been tasked with adding a newly installed uplink to vSwitch1. Based on the exhibit, what is a true statement about this environment?

A. The server does not have available vSwitches to be assigned to this uplink.B. The available uplinks are not compatible with a standard vSwitch.C. The host needs a driver installed for the newly installed uplink.

D. The current uplinks cannot be attached because they are in use by other port groups.


Explanation/Reference:as you can see that the Next button is greyed out. This means the host needs driver installed on the newly installed uplink. Once the driver in installed, the Nextbutton will become active.

QUESTION 324Which settings are required for virtual machine guest tagging for VLAN 100 in a vSphere 5.x environment?

A. Port Group configured for VLAN 100, physical switch configured as a VLAN trunkB. Port Group configured for VLAN 4095, physical switch configured as a VLAN trunkC. Port Group configured for VLAN 100, physical switch configured for VLAN 100D. Port Group configured for VLAN 4095, physical switch configured for VLAN 100


Explanation/Reference:A VLAN ID, which restricts port group traffic to a logical Ethernet segment within the physical network, is optional. For a port group to reach port groups located onother VLANs, the VLAN ID must be set to 4095. If you use VLAN IDs, you must change the port group labels and VLAN IDs together so that the labels properlyrepresent connectivity.

If you enter 0 or leave the option blank, the port group can see only untagged (non-VLAN) traffic. If you enter 4095, the port group can see traffic on any VLANwhile leaving the VLAN tags intact.

QUESTION 325When you are configuring the NIC teaming policy for a vSwitch, what happens when the Failback option is set to Yes?

A. A failed uplink will be left inactive upon recovery until another uplink fails.B. The vswitch is notified when a failover event occurs.C. The physical switches are notified when a failback event occurs.D. A failed uplink is returned to active duty immediately upon recovery.

Correct Answer: D


Explanation/Reference:��Select Yes or No to disable or enable failback.This option determines how a physical adapter is returned to active duty after recovering from a failure. If failback is set to Yes (default), the adapter is returned toactive duty immediately upon recovery, displacing the standby adapter that took over its slot, if any. If failback is set to No, a failed adapter is left inactive even afterrecovery until another currently active adapter fails, requiring its replacement.

QUESTION 326Which three features are only available in the vSphere Client when using a vSphere Distributed Switch? (Choose three.)

A. Port MirroringB. PVLAN taggingC. Storage I/O ControlD. Ingress Traffic ShapingE. 802.1q VLAN Tagging

Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-51-networking-guide.pdf

QUESTION 327What are three methods of adding virtual machine networking to a vSphere Distributed Switch? (Choose three.)

A. A portgroup can be created using the vSphere client and virtual machines can be added using their Properties tab.B. A portgroup can be created as part of the Migrate Virtual Machine Networking wizard before virtual machines are moved to the vDS.C. A portgroup can be cloned from a vSphere Standard Switch, inheriting the virtual machines that were attached to the cloned portgroup.D. A portgroup can be created using the vSphere client and virtual machines can be migrated using the Migrate Virtual Machine Networking wizard.E. A portgroup can be created during the creation of the vDS and virtual machines can be migrated using the Migrate Virtual Machine Networking wizard.



http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-51-networking-guide.pdf

QUESTION 328What are two network load-balancing policies for a vSphere Distributed Switch? (Choose two.)

A. Route based on source MAC hashB. Route using physical NIC loadC. Route based on the destination virtual port IDD. Route based on port IP hash


Explanation/Reference:http://pubs.vmware.com/vsphere-51/index.jsp#com.vmware.vsphere.networking.doc/GUID-796BBD4A-18E2-4E19-889C-C529AF011323.html

QUESTION 329Which type of port on a secondary private VLAN can communicate with promiscuous ports and other ports that share its VLAN tag?

A. IsolatedB. PromiscuousC. CommunityD. Trunked


Explanation/Reference:http://pubs.vmware.com/vsphere-55/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-55-networking-guide.pdf

QUESTION 330Which methods can be used to migrate a VMkernel port from a vSphere Standard Switch to a vSphere Distributed Switch? (Choose two.)

A. Use the Add Virtual Adapter wizard from the Manage Virtual Adapters window.B. Use the Manage Hosts wizard from the Configuration tab of the vDS.C. Use the Migrate Virtual Machine Networking option to select the port from a list.D. Edit the Network Adapter settings for the port and select a dvPort group from the list.


Explanation/Reference:http://www.dashvue.com/2011/04/migrating-to-vnetwork-distributed-switch/

QUESTION 331Which statement describes the functionality of traffic shaping on a vSphere Standard Switch?

A. vSphere Standard Switches support only egress traffic shaping.B. vSphere Standard Switches support both ingress and egress traffic shaping.C. vSphere Standard Switches support best-effort traffic shaping based on quality of service (QoS).D. vSphere Standard Switches support only ingress traffic shaping.


Explanation/Reference:A traffic shaping policy is defined by average bandwidth, peak bandwidth, and burst size. You can establish a traffic shaping policy for each port group and eachdistributed port or distributed port group.ESXi shapes outbound network traffic on standard switches and inbound and outbound traffic on distributed switches. Traffic shaping restricts the networkbandwidth available on a port, but can also be configured to allow bursts of traffic to flow through at higher speeds.

QUESTION 332Which vSwitch or vSwitch port group policy setting allows packets to be received by a virtual machine with different destination MAC addresses than the configuredMAC address?

A. Promiscuous modeB. Traffic shapingC. Forged transmitsD. MAC address changes


Explanation/Reference:Mac address changes allows packets to be received by virtual machines with different destination mac addresses than the configured one.

QUESTION 333What failure will beacon probing identify in vSphere networking?

A. An improper VLAN configuration on a physical switch portB. A disconnected network cableC. A VMkernel IP mismatch affecting vMotion or HA trafficD. Jumbo frames improperly configured on an iSCSI target


Explanation/Reference:http://kensvirtualreality.wordpress.com/2009/04/10/the-great-vswitch-debate-part-4/ (see beacon probing)

QUESTION 334An administrator is creating a vSphere Standard Switch with virtual machine and VMkernel networking. The administrator has two uplinks attached to the switchand wants to make sure multiple sessions for a virtual machine can utilize both uplinks.

Which load-balancing policy will guarantee this requirement is met, even if additional management or virtual machine traffic is added to the switch in the future?

A. Route based on IP hashB. Route based on source MAC hashC. Route based on the originating port IDD. Use explicit failover.


Explanation/Reference:http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf (page 8, see route based on IP hash)

QUESTION 335An administrator wants to determine the current network adapter configuration for an uplink on an ESXi 5.x host.

Which three items can be viewed from the Network Adapters section of the Configuration tab, using the vSphere Client? (Choose three.)

A. VLAN configurationB. Adapter DriverC. Actual speed and duplexD. Adapter NameE. vSwitch configuration

Correct Answer: CDESection: (none)Explanation

Explanation/Reference:http://www.vmguru.nl/wordpress/wp-content/uploads/2010/03/networkcards-config-check.jpg

QUESTION 336Which three statements regarding Network I/O Control (NetIOC) are accurate? (Choose three.)

A. Isolation allows domination by any one traffic flow.B. Limits enforce maximum throughput control on a virtual machine.C. Enforce traffic bandwidth limit on the overall vDS set of dvUplinks.D. Load based teaming efficiently uses a vDS set of dvUplinks for network capacity.E. Relative shares fairly allocates available bandwidth among multiple flows.

Correct Answer: CDESection: (none)Explanation

Explanation/Reference:http://www.vmware.com/files/pdf/techpaper/VMW_Netioc_BestPractices.pdf (page 4)

QUESTION 337Which two statements are true about VLANs and portgroups defined on a vSphere Standard Switch? (Choose two.)

A. A VLAN can be accessed by the entire virtual switch or individual portgroups.B. VLANs can be configured only on individual portgroups.C. Multiple portgroups are restricted from accessing the same VLAN.D. Multiple VLANs can be accessed by virtual machines connected to one portgroup.


Explanation/Reference:http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf (page 6, see port groups)

QUESTION 338A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks. A new uplink is added to the vswitch. What additional configurationis required by default?

A. The uplink is placed in standby mode until it is added to the active NIC team.B. The uplink is considered active, but it will not participate in the active NIC team until assigned to a port group.C. The physical switch must add the new port to the existing 802.3ad group.D. The uplink is automatically marked as unused when it is added to IP-based NIC team.


Explanation/Reference:For 802.3ad group, you need to add a physical switch to make sure it works properly. The switch must be set to perform 802.3ad link aggregation in static modeON and the virtual switch must have its load balancing method set to Route based on IP hash. Ensure that the participating NICs are connected to the portsconfigured on the same physical switch.

QUESTION 339An administrator is working to implement Storage Profiles in their environment. Which two ways can storage capabilities be generated? (Choose two.)

A. They are generated by Datastore Clusters as LUNs are added to the cluster.B. They are automatically determined by the Storage Profile when it is created.C. They can be retrieved from the array through the VMware APIs for Storage Awareness (VASA).D. They can be manually generated by the administrator.


Explanation/Reference:Understanding Storage Capabilities

A storage capability outlines the quality of service that a storage system can deliver. It is a guarantee that the storage system can provide a specific set ofcharacteristics for capacity, performance, availability, redundancy, and so on.If a storage system uses Storage APIs – Storage Awareness, it informs vCenter Server that it can guarantee a specific set of storage features by presenting themas a storage capability. vCenter Server recognizes the capability and adds it to the list of storage capabilities in the Manage Storage Capabilities dialog box. Suchstorage capabilities are system-defined. vCenter Server assigns the system-defined storage capability to each datastore that you create from that storage system.

NOTE:Because multiple system capabilities for a datastore are not supported, a datastore that spans several extents assumes the system capability of only one of itsextents.You can create user-defined storage capabilities and associate them with datastores. You should associate the same user-defined capability with datastores thatguarantee the same level of storage capabilities. You can associate a user-defined capability with a datastore that already has a system-defined capability. Adatastore can have only one system-defined and only one user-defined capability at a time.

QUESTION 340An administrator has deployed vCenter Data Recovery and wants the largest possible de-duplication store. Which three storage options can be used? (Choosethree.)

A. Two CIFS sharesB. Two RDMs on a FCP arrayC. One NFS mount on the ESXi host and one RDMs on an iSCSI arrayD. One CIFS share and one FCP RDME. Two NFS mounts on the ESXi host

Correct Answer: BCDSection: (none)Explanation

Explanation/Reference:VDR supports deduplication stores that are up to one terabyte in size and each backup appliance is limited to using two deduplication stores per appliance ( 1 TBon VMDKs and RDMs and 500 GB on CIFS network shares). To get the largest possible dedup store, we must not use CIFS.

QUESTION 341An administrator must decommission a datastore.

Before unmounting the datastore, which three requirements must be fullfilled? (Choose three.)

A. No virtual machines reside on the datastore.B. The datastore is not used for vSphere HA heartbeat.C. No registered virtual machines reside on the datastore.D. The datastore must not have any extents.E. The datastore must not be part of a datastore cluster.

Correct Answer: ABESection: (none)Explanation


QUESTION 342A company wants to increase disk capacity for their vSphere environment Management mandates that: 1. vMotion must work in this environment.

2. The existing LAN infrastructure must be used.

Which storage option best meets the company objectives?

A. iSCSIB. Fibre ChannelC. SATAD. NFS


Explanation/Reference:NFS is a good choice to increase disk capacity of a vSphere environment in which vMotion can be used and the existing LAN infrastructure can be used.

QUESTION 343An administrator has determined that storage performance to a group of virtual machines is reduced during peak activity. The virtual machines are located in aVMFS datastore called Production1 on an active-active storage array. The ESXi 5.x host running the virtual machines is configured with an MRU multipathingpolicy.

Which two actions can be taken to improve the storage performance of these virtual machines? (Choose two.)

A. Add virtual storage, create a VMFS datastore called Production2 on the new storage, and then migrate some of the virtual machines from Production1 toProduction2.

B. Change the storage multipathing policy to Round Robin.C. Add physical storage, create a VMFS datastore called Production2 on the new storage, and then migrate some of the virtual machines from Production1 to

Production2.D. Change the storage multipathing policy to Fixed with default settings.


Explanation/Reference:Round Robin (VMware) The host uses an automatic path selection algorithm rotating through all available paths. This implements load balancing across all theavailable physical paths.Load balancing is the process of spreading server I/O requests across all available host paths. The goal is to optimize performance in terms of throughput (I/O persecond, megabytes per second, or response times).

QUESTION 344Which three requirements must be met in order to use Storage I/O Control? (Choose three.)

A. The datastore must contain multiple VMFS extents.B. The datastore must contain a single NFS volume.C. The datastore must not include virtual machines with snapshots.D. The datastore must be managed by a single vCenter Server.E. Array-based automated storage tiering must be explicitly certified.

Correct Answer: BDESection: (none)Explanation

Explanation/Reference:Extents are only a single extent – not multiples. Also, because NFS is not VMFS it does not use extents. You grow the NFS from the actual NAS appliance itselfwith extents.

QUESTION 345What number of IOPS should be used with Storage I/O Control to limit disk throughput to roughly 10 MBps if the guest application writes 64KB blocks?

A. 320B. 160

C. 240D. 64


Explanation/Reference:http://www.vmware.com/files/pdf/techpaper/view_storage_considerations.pdf (page 3 and 4)

QUESTION 346What are two methods of maximizing VMFS performance for virtual machines across all the hosts in a cluster? (Choose two.)

A. Use disk shares to prioritize virtual machine disk I/OB. Enable Storage I/O controlC. Enable Storage DRS with I/O load balancingD. Enable Host Cache using local SSD drives


Explanation/Reference:To maximize VMFS performance of virtual machines, you can enable Storage I/O control and storage DRS with I/O load balancing.Reference: http://www.vmware.com/files/pdf/techpaper/VMW-vSphere41-SIOC.pdf


For the selected item, what two properties could the storage administrator use to create a zone? (Choose two.)

A. 20.00.00.1b.32.13.14.a7B. vmhba1.C0.T0.L1C. fc.2000001b321314a7.2100001b321314a7D. 50.06.01.60.c1.e0.65.22


Explanation/Reference:Fibre channel adapter and target needs to be used to create a zone.

QUESTION 348A new LUN has been provisioned to all hosts in a vSphere 5.x cluster. On one host a new VMFS datastore has been created.

How will the new datastore be discovered by the other ESXi 5.x hosts?

A. A rescan of all host bus adapters is periodically performed by ESXi hosts to detect new VMFS datastores.B. New VMFS volumes are automatically added to members of a cluster by vCenter 5.C. A manual refresh is required on each ESXi 5.x hosts to discover new VMFS datastores.D. A refresh of all host bus adapters is periodically performed by ESXi hosts to detect new VMFS datastores.


Explanation/Reference:You need to manually refresh every ESXi 5.x host to get it to discover newly added VMFS datastores.

QUESTION 349The storage administrator has recommended testing the performance benefits of jumbo frames and enabled jumbo frames on the storage array. The VMwareadministrator has enabled jumbo frames on the VMkernel port used for the software iSCSI initiator.

What other two components must be modified to enable jumbo frames support for the software iSCSI initiator? (Choose two.)

A. The physical switchB. The port groupC. The software initiatorD. The virtual switch


Explanation/Reference:http://www.interworks.com/blogs/kculwell/2010/01/29/enabling-jumbo-frames-vmware-esx-4

QUESTION 350What is one requirement when adding an extent to a VMFS datastore?

A. A new unused NFS mountB. An RDM with sufficient space availableC. An unused iSCSI or FCP LUND. Free space on the LUN holding the VMFS datastore



QUESTION 351How can you verify that vStorage APIs for Array Integration (VAAI) functionality is enabled for a storage array in a vSphere 5.x implementation?

A. VAAI will be reported on the Hard Disk properties page for any VMDK stored on a compliant arrayB. Hardware Acceleration will be reported on the Hard Disk properties page for any VMDK stored on a compliant arrayC. Supported will be listed in the VAAI column for any datastore created on a compliant arrayD. Supported will be listed in the Hardware Acceleration column for any datastore created on a compliant array


Explanation/Reference:http://www.vmware.com/files/pdf/techpaper/VMware-vSphere-Storage-API-Array-Integration.pdf

QUESTION 352When designing a storage infrastructure to support ESXi 5.x hosts what limit will be reached first?

A. Maximum number of NFS datastoresB. Maximum number of iSCSI LUNsC. Maximum number of paths to an iSCSI RDM

D. Maximum number of iSCSI paths on a host


Explanation/Reference:When the storage infrastructure is designed to support ESXi 5 hosts, the number of path to an iSCSI RDM are reaches its limit first.

QUESTION 353Which is the most secure method of connecting to an iSCSI storage array using an independent hardware iSCSI adapter?

A. One-way CHAPB. Mutual CHAPC. Per-target CHAPD. Per-subnet CHAP


Explanation/Reference:If you’re thinking two direction CHAP authentication would be the most secure, you would probably be right EXCEPT the question was about an independenthardware iSCSI adapter. As per the VMware pubs page: “Independent hardware iSCSI supports CHAP only at the initiator level.” which means One-way CHAP.

QUESTION 354Which are the correct parameters to specify when adding an iSCSI target to an ESXi 5.x host using the Static Discovery tab?


A. iSCSI server ip address, port 902B. iSCSI server ip address, port 3260C. iSCSI server ip address, port 902, iSCSI target name

D. iSCSI server ip address, port 3260, iSCSI target name



QUESTION 355An administrator decides to implement a Fixed multipathing policy for an ESXi 5.x host with four available paths to one VMFS datastore. After the policy has beenenabled for the datastore, how many paths will have an active status by default?

A. 4B. 3C. 1D. 2

Correct Answer: Section: (none)Explanation

Explanation/Reference:When the policy has been enabled for the datastore, 4 paths will have active status by default.


What does the graph in the exhibit indicate?

A. The average amount of read and write latency from the ESXi host to the SAN.B. The average amount of read and write latency from the guest operating system to the virtual machine virtual disk file.C. The average amount of read and write latency from the ESXi host to the datastore.D. The average amount of read and write latency from the cluster to the datastore.


Explanation/Reference:http://vmdamentals.com/?p=2603

QUESTION 357A request has been made to the SAN administrator to provision a new LUN. A LUN (LUN 6) is created, and the SAN administrator presents the LUN to an ESXi 5.xhost, using the storage array SAN management software. The administrator looks at the Storage configuration for the ESXi host, and does not see the new LUN.Other LUNs from the same storage array are visible.Which two conditions are most likely to cause the error described? (Choose two.)

A. The administrator has not performed a Rescan All on the ESXi host.B. The multipathing policy has been set to Fixed for the LUN.C. Zoning on the Fibre Channel switches is not configured correctly.D. The LUN was not presented to the correct ESXi host.


Explanation/Reference:The cause of the error is that the administrator didn’t perform a rescan all of ESXi host. Whenever a new LUN is provisioned, a manual rescan all has to beperformed to enable ESXi to discover new LUNs. The second possibility is that the new LUN was not presented to the ESXi host that was intended by theadministrator.

QUESTION 358When comparing software iSCSI initiators with independent hardware initiators, what are the additional CHAP security levels available for a softwareimplementation? (Choose two.)

A. Do not use CHAP unless required by targetB. Use CHAPC. Use CHAP unless prohibited by targetD. Do not use CHAP


Explanation/Reference:http://searchvmware.techtarget.com/tip/VSphere-iSCSI-initiator-authentication-changes-enhance-system-uptime-security

QUESTION 359The storage administrator is preparing an action plan to upgrade a Fibre Channel storage array.

The current plan will result in extended downtime for a VMFS LUN that is part of a SDRS cluster.

What steps can be taken in a vSphere 5.x environment to minimize the impact of the downtime? (Choose two.)

A. Ensure there are multiple active paths to the LUN

B. Ensure DRS is configured properlyC. Use Storage vMotion to migrate the affected VMDKsD. Place the datastore into maintenance mode


Explanation/Reference:http://blog.mwpreston.net/vcp-5/vcp-5-objective-5-4-migrate-virtual-machines/

QUESTION 360Which two types of information can be obtained about a VMFS datastore using the Summary tab for a connected host in the vSphere Client? (Choose two.)

A. Multipathing status for the datastoreB. Hardware Acceleration statusC. Alarm Actions status for the datastoreD. Runtime name of the datastore


Explanation/Reference:http://pubs.vmware.com/vsphere-4-esxi-installable-vcenter/index.jsp?topic=/com.vmware.vsphere.esxi_server_config.doc_41/esx_server_config/introduction_to_storage/c_displaying_datastores.html

QUESTION 361An administrator is configuring an ESXi 5.x host with two dual-port Fibre Channel (FC) HBAs. The FC storage array has four active storage processor ports. Zoningis configured on both fabrics, with ESXi HBA ports and the array ports in the same zone. There are two LUNs with VMFS datastores configured.

Using Round Robin multipathing, what is the maximum number of paths that can be used to send data to the VMFS datastores at any given time?

A. 2B. 3C. 1D. 4

Correct Answer: A


Explanation/Reference:Multi-pathing is set on the HBA level and there are 2 HBAs. Therefore they will alternate on each HBA.

QUESTION 362Which three features can be used in combination with network-attached storage (NAS)? (Choose three.)

A. Datastores up to 64TBB. virtual-mode RDMsC. N-Port ID VirtualizationD. Storage I/O controlE. VMware Storage DRS


Explanation/Reference:In vSphere, you can use NAS with datastores up to 64 TB in capacity, storage I/O control and Storage DRS. NAS supports all three of these.

QUESTION 363Which three files are valid virtual machine files that might be identified when examining a folder that contains a virtual machine template on a VMFS datastore?(Choose three.)

A. RDM map file (-rdm.vmdk)B. BIOS settings file (.bios)C. Template file (.vmtx)D. Lock file (.lck)E. Suspended state file (.vmsn)


Explanation/Reference:RDM map file, template file and suspended state file are virtual machine files that reside in a folder named after that virtual machine. The template file is related tovirtual machines configurations and the suspended state file is related to configuration that suspends virtual machines. RDM is a mapping file in a separate VMFS

volume that acts as a proxy for a raw physical storage device. The RDM allows a virtual machine to directly access and use the storage device. The RDM containsmetadata for managing and redirecting disk access to the physical device.The file gives you some of the advantages of direct access to a physical device while keeping some advantages of a virtual disk in VMFS. As a result, it mergesVMFS manageability with raw device access.RDMs can be described in terms such as mapping a raw device into a datastore, mapping a system LUN, or mapping a disk file to a physical disk volume. All theseterms refer to RDMs.

QUESTION 364An administrator plans to deploy ESXi 5.x on a blade server containing no local disks.

What boot options are supported for use in place of local disks? (Choose three.)

A. An SD cardB. A NIC with iBFTC. Auto DeployD. A server with IPMI or iLOE. A dedicated NFS share


Explanation/Reference:http://www.vmware.com/files/pdf/techpaper/vSphere-5-ESXi-Operations-Guide.pdf (page 8, 4th para)

QUESTION 365Which two storage adapters require no VMkernel ports? (Choose two.)

A. Independent Hardware iSCSI AdapterB. iSCSI Software AdapterC. Dependent iSCSI AdapterD. Fibre Channel HBA


Explanation/Reference:Independent hardware iSCSI adapter and Fibre Channel HBA don’t need VMkernel ports. Independent hardware iSCSI adapter implements its own networking and

management interfaces. All configuration such as IP management, MAC addressing and other parameters are completely separate from VMware.

QUESTION 366When a virtual machine interacts with persistent thick virtual disks stored on a traditional Fibre Channel storage array, which two actions are always taken by theVMkernel? (Choose two.)

A. The file corresponding to the virtual machine is located on the VMFS datastore using NPIV.B. Correlate the blocks requested by the virtual machine with the actual blocks on the array.C. Send the I/O request through the device driver to the physical HBA or software FCoE adapter.D. Place an atomic lock on the metadata database for the VMFS volume.


Explanation/Reference:http://www.vmware.com/files/pdf/techpaper/VMware-vSphere-Storage-API-Array-Integration.pdf

QUESTION 367Which options would reduce the load on the VMkernel when connecting to an iSCSI array? (Choose two.)

A. Use an independent hardware iSCSI adapterB. Use a Converged Network AdapterC. Enable the software iSCSI adapterD. Use a dependent hardware iSCSI adapter


Explanation/Reference:Since independent hardware iSCSI adapter doesn’t need a VMkernel port, and it uses all its networking and management interfaces all by itself, it will significantlyreduce the load on VMkernel. Similarly, dependent iSCSI adapter use very little resources and hence can reduce the load off VMkernel.

QUESTION 368ACME Tools has a vSphere 5.x deployment with an older iSCSI storage array. The administrator is considering adding an additional array, which will includesupport for the vStorage APIs for Array Integration (VAAI).

Which two tasks would be completed in a reduced period of time if the new array was added? (Choose two.)

A. creating VMFS datastores on the new arrayB. creating fault tolerant virtual machines on the new arrayC. migrating virtual machines using Storage vMotion between the arraysD. writes to thin provisioned virtual disks on the new array


Explanation/Reference:http://searchvirtualstorage.techtarget.com/definition/vStorage-APIs-for-Array-Integration-VAAI

QUESTION 369An administrator using vCenter Operations Manager notices an increase in resource consumption by virtual machines over a period of time. The administratorneeds to understand how adding more hosts or increasing resources in existing hosts will address the growing resource requirements of the virtual machines.Which vCenter Operations Manager feature can provide this information?

A. Host or Cluster Capacity Optimization ReportB. What-if ScenariosC. Density and Reclaimable Waste badgesD. Virtual Machine Optimization Report




-- Exhibit --

The virtual machine Fileserver01 shown in the exhibit can not ping anything on the Internet.

Why is Fileserver01 unable to connect to the Internet?

A. Fileserver01 does not have a reachable IP address.B. Fileserver01 is not on the Production network.C. The virtual nic for Fileserver01 has a speed or duplex mismatch.D. The vSwitch1 virtual switch does not have an attached vmnic adapter.



QUESTION 371An administrator needs to know the estimated time remaining on a virtual machine that is hosting a critical accounting application given current assigned resourcessuch as memory, CPU, and disk.When an administrator selects the virtual machine in the vCenter Operations Manager console, which major badge should the administrator investigate todetermine this information?

A. RiskB. HealthC. EfficiencyD. Time Remaining



QUESTION 372An application server has been added to an existing multi-tier application contained in a vApp. Shortly after a planned maintenance event, users are unable toaccess the application.

What does the vSphere administrator need to change to ensure the application can be accessed?

A. The startup order of the vAppB. The shutdown option to power off the virtual machinesC. The IP Allocation policy to DHCPD. The Memory Shares to High



QUESTION 373A vSphere administrator needs to upgrade a single extent VMFS3 datastore to VMFS5 and expand it to 4TB in size. The storage administrator has alreadyexpanded the underlying LUN to 4TB.Which steps should the vSphere administrator take?

A. Expand the VMFS3 datastore to 4TB and then upgrade to VMFS5B. Upgrade the datastore to VMFS5, manually change the partition scheme to GPT, and then expand the datastore to 4TBC. Upgrade the datastore to VMFS5 and then expand it to 4TBD. Change the block size of the VMFS3 datastore to 1MB, upgrade the datastore to VMFS5, and expand it to 4TB



QUESTION 374To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes ofinactivity.

What should the administrator do to meet the requirement?

A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10



QUESTION 375What are two features provided by VMFS5? (Choose two.)

A. Support for greater than 2TB storage devices for only VMFS and Physical RDMsB. Support for up to 32 extentsC. Support for greater than 2TB storage devices for VMFS, Physical and Virtual RDMsD. Support for up to 64 extents



QUESTION 376During the installation of ESXi, a vmkernel interface can be configured with what capabilities?

A. Management trafficB. Management traffic and vMotionC. Management traffic, vMotion and Fault Tolerance loggingD. Management traffic, vMotion, Fault Tolerance logging and IP storage



QUESTION 377As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to theother instances? (Choose two.)

A. Schedule a Replication Task on the primary instanceB. Select the first instance during the installation of subsequent instancesC. During the installation of each instance choose Linked-ModeD. Enable Synchronize to Active Directory on each instance



QUESTION 378

A network auditing team has observed activity from a virtual machine that may be an organization policy security breach. The vSphere administrator needs to stopnetwork traffic from the virtual machine.Which step should the administrator take?

A. Enable Port Blocking on the vSphere Standard Switches in the organization and block the port on which the virtual machine is connected.B. Enable Port Blocking on each vSphere Standard Switch portgroup in the organization, then block the port on which the virtual machine is connected.C. Enable Port Blocking on each vSphere Distributed Switch portgroup in the organization, then block the port on which the virtual machine is connected.D. Enable Port Blocking on the vSphere Distributed Switches in the organization and block the port on which the virtual machine is connected.



QUESTION 379A server administrator reports that a virtual machine has displayed the following message twice in the past 12 months:

No boot device found

Which virtual machine boot option should the administrator configure to resolve this issue?

A. Failed Boot RecoveryB. Force BIOS SetupC. Boot DelayD. Network Boot Retry



QUESTION 380An administrator is using vSphere Replication to replicate a number of virtual machines to a recovery site. The administrator plans on enabling Storage DRS on theproduction site, which is running vSphere 5.5. What changes must be made in order to support this configuration?

A. Storage DRS can be added to the existing configuration without any configuration changesB. Disable Storage DRS on the virtual machines utilizing vSphere ReplicationC. Change the Recovery Point Objective for the replicated virtual machines to support the additional synchronization timeD. Storage DRS cannot be used in conjunction with vSphere Replication



QUESTION 381Which condition would prevent an administrator from unmounting a VMFS datastore?

A. The datastore is being managed by Storage DRS.B. The datastore contains vCenter Server templates.C. The datastore is mounted by multiple hosts.D. The storage backing the datastore is detached.



QUESTION 382A system administrator needs to control the allocation of memory and CPU resources to an organization's Finance team. The vSphere environment is built on asingle cluster of ESXi hosts.

Which feature can be used to accomplish this task?

A. Resource Pool ReservationsB. DRS set to Fully AutomatedC. Virtual Machine SharesD. DRS Virtual Machine Groups

Correct Answer: A



QUESTION 383An administrator is planning a new vSphere deployment using shared storage. The solution must support:· vMotion· Storage vMotion· Fault Tolerant virtual machines· VAAI primitives· RDM disks

Which storage type will meet these requirements?

A. CIFSB. iSCSIC. NFSD. vSAN



QUESTION 384Which statement is true regarding the licensing of vCenter Server?

A. The license for vCenter Server must be provided at the time of installation.B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.C. Virtual machines can still be powered on if the vCenter Server license expires.D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.



QUESTION 385Which information can the administrator use to identify iSCSI nodes?

A. MAC addressB. IQNC. WWND. LUN ID



QUESTION 386A vSphere administrator notices that hosts are not powering off when the total cluster load is low on a cluster configured with Dynamic Power Management.

What condition could cause this behavior?

A. The DRS migration threshold is set to the most conservative setting.B. The DRS migration threshold is set to the most aggressive setting.C. The DPM migration threshold is set to the most conservative setting.D. The DPM migration threshold is set to the most aggressive setting..




-- Exhibit --

A vSphere administrator installs an ESXi host and creates a virtual machine, then installs vCenter Server. Upon connecting to the environment, the administratornotices that several inventory views appear to be missing from the Navigation Bar as shown in the Exhibit.

Which condition would result in this behavior?

A. The vSphere administrator is logged directly into the ESXi host.B. The vSphere administrator is logged directly into the vCenter Server.C. The vSphere administrator has limited permissions on the ESXi host.D. The vSphere administrator has limited permissions on the vCenter Server.



QUESTION 388Which action should an administrator take to increase the size of a VMFS5 datastore from 2TB to 32TB?

A. Dynamically expand the original LUN and add a second share for the NFS datastoreB. Dynamically expand the original LUN and increase the size of the VMFS datastoreC. Dynamically expand the original LUN and add extents to the VMFS datastoreD. Dynamically expand the original LUN and add extents to the NFS datastore



QUESTION 389A user has submitted a trouble ticket complaining that the email server VM has become very sluggish. After looking at the logs, the vSphere administrator suspectsthe iSCSI network is experiencing congestion.What esxtop statistic should the administrator examine in order to validate that the guest OS is experiencing performance degradation?

A. GAVG/wrB. %ACTVC. PATHD. PKTRXMUL/s



QUESTION 390An administrator needs to configure vFlash Read Cache to improve performance.

What would benefit the most from enabling vFlash Read Cache?

A. Virtual machines replicated with vSphere ReplicationB. Web Server virtual machinesC. Database virtual machinesD. Virtual machines migrated using Storage vMotion



QUESTION 391Why would a vSphere administrator configure resource shares for a virtual machine?

A. To prioritize access to a resource during contentionB. To guarantee access to a resource during contentionC. To prioritize access to a resource at all timesD. To guarantee access to a resource at all times



QUESTION 392A vSphere administrator manages a three host cluster with 20 VMs. The HA cluster is configured with the Host Failures the Cluster Tolerates admission controlpolicy and all other settings are set to default values. The administrator determines that one of the VMs is not able to power on. After further inspection, it isdetermined that this VM cannot power on because of a very large CPU reservation.

Which cluster advanced HA setting can the administrator modify to enable the virtual machine to power on?

A. Lower das.vmcpumaxmhz attribute valueB. Higher das.vmcpuminmhz attribute valueC. Lower das.slotcpuoutmhz attribute valueD. Higher das.slotcpuinmhz attribute value




vmware.actualtests.vcp550d.v2015-03-06.by.joseph · 2015. 3. 6. · question 7 an administrator is...

Documents