zippo - masterpiece models · pdf filezippo view 4 assembly illustration for front gun...
TRANSCRIPT
- ZIPPO -
ZIPPO View 1
Assembly the samefor both guns
The rings (2) to be made from styrene rod (supplied).
Vents (3 places)
ZIPPO View 2
Assembly the samefor both guns
ZIPPO View 3
7/8" (.875") in length.(2 places)
11/4" (1.25") in lenght (X2)
11/4" (1.25") in lenght (x2)21/4" (2.25") in length (X2)
21/4" (2.25") in length (X2)
21/4" (2.25") in length (X2)
21/4" (2.25") in length (X2)
Back view
Front gun
Rear gun
ZIPPO View 4
Assembly illustration for front gunAssemble gun cage around the gun. Don't assemble gun cage first Assembly the same for both guns
Continue to place the vertical bars.
ZIPPO View 5
ZIPPO View 6
Cut and fashion styrine rod to create "Grille Bars"
ZIPPO View 7
(3 lights) - Assemble and attach to back side of grille bars.
(2 handles) - Attach to front side of grille bars.
Back side
Build this mast (4" piece and 1"piece)from styrine rod and use threadto rig it. Cut 2 styrine pieces at 5" long
and attach them to the postson the middle deck.
Thread
Attach 8 vertical "Bumpers" onthe port side only.