zincoxide glasspolyalkenate eugenolvladmiva.ru/uploads/editor/file/catalog_vladmiva_en.pdf ·...
TRANSCRIPT
GLASS IONOMER(GLASSPOLYALKENATE)
ZINCOXIDE-EUGENOL
SILICATE
SILICATE-PHOSPHATE
POLYCARBOXILATE
ARGECEM
AQUIONAQUION-АRТ
CEMILIGHT
CEMIONCEMION-АRТ
CEMION-COLOR
CEMILINECEMILINE-LC
COMPOSITE
COMPOMER
COMPOCEM
DENTLIGHT
TEMPOPHOT
IZOLINE
EODENTQUICK-HARDENING
BELACIN
BELADONT
BELOCOR
ZINCSULFATE
DENTINE-DOUGHDENTINE-POWDER
ZINCPHOSPHATE
UNICEMUNICEM BACTERICIDAL
FILLING MATERIALS
7
ANALOGUES FOR USE«Aqua lonofil» - «VOСO», Germany«Сhemfil Superior» - «Dentsply», USA
FILLING MATERIALS
ANALOGUES «Сhemfil ART» - «Dentsply», USA
FOR USE
AQUIONGLASS IONOMER WATER-CURED CEMENT
GLASS IONOMER WATER-CURED CEMENT
AQUION - ART
FEATURES
PACKAGING
Powder of «Aquion» glass-ionomer water-cured radiopaque cement contains fluoroaluminum glass and polyacrylic acid. It is mixed with distilled water resulting the obtainment of filling cement featuring rapid hardening and good adhesion to enamel and dentine.
The material features high bio-compatibility with tooth tissues, long anti-carious effect, high stability and low solubility. It meets the requirements of GOST R 51744.
«Aquion-ART» glass-ionomer water-cured radiopaque cement is a fibe powder containing fluoroaluminum glass, modified agents and polyacrylic acid. The powder should be mixed with distilled water resulting the obtainment of filling cement featuring good edge fitting and high adhesion to enamel and dentine.
The material features high bio-compatibility with tooth tissues, long anti-carious effect, high stability and low solubility. It meets the requirements of GOST R 51744. The cement also features long anti-caries effect due to fluorine ions leakage.
Сode 00003522 Powder - 20 g; Conditioner -10 ml; Varnish - 10 mlPACKAGING
PURPOSE
�
�for filling milk teeth;�for filling cavities of the 5th class;�for treating non-caries lesion of hard tissues;�for provisional filling;�for modeling tooth stump to be crowned;�for lining when filling with composites and amalgams;�for fissure hermetization.
for filling cavities of the 1st and the 2nd classes;
Сode 00006950 Code 00007205 Powder (A2) - 20 g; Conditioner - 10 ml; Varnish - 10 ml Code 00004089 Powder (A3) - 20 g; Conditioner - 10 ml; Varnish - 10 mlCode 00021533 Powder (B2) - 20 g; Conditioner - 10 ml; Varnish - 10 ml Code 00011082 Powder (C2) - 20 g; Conditioner - 10 ml; Varnish - 10 ml
Powder (A2) - 20 g, (A3,B2,C2) 10 g x 3 pc; Conditioner - 15 ml; Varnish - 15 ml
Is used for atraumatic restorative treatment of tooth caries (ART-method) by means of handle treating carious cavity and minimal using drill machine. The cavity is filled with strong adhesive material featuring anticaries effect without cavity preparation (after necrectomy by means of explorer). ART-method is used in dentistry including pediatric one.
FEATURES
8
PURPOSE�
�for filling milk teeth (all cavities);�for filling cavities of the 5th class;�for treating non-caries lesion of hard tissues;�for modeling tooth stump to be crowned;�for lining when filling with composites and amalgams;�for fissure hermetization.
for filling cavities of the 1st and the 2nd classes;
PURPOSE
FEATURES
PACKAGING
� filling milk teeth;� modelling tooth stump to be crowned;� treating permanent teeth (cavities of the 1st class);� tunnel preparations;� lining under different types of filling materials;� hermetizing perforations in tooth furcation area;� fissures hermetizing.
«Argecem» material contains fine silver particles increasing cement solidity, its abrasion stability, mechanical properties and providing its radiopacity.
«Argecem» cement features chemical adhesion to dentine and enamel, low solubility, fluorine and silver ions release preventing secondary caries.
As «Argecem» material has a grey shade, it is not recommended to be used for filling front teeth.
Code 00001728 Powder - 20 g; Liquid - 10 m; Conditioner - 10 ml; Varnish - 10 ml
ARGECEM GLASS IONOMERSILVER CONTAINING CEMENT
BELADONTSILICOPHOSPHATE CEMENT
ANALOGUES «Alpha Silver» - «DMG», Germany«Argion Molar» - «VOCO», Germany«Chelon Silver» - «ESPE», Germany
FOR USE
ANALOGUES «Silidont 2» - «Lactodont» - «Medpolimer», Russia«Infantid» - «Spofa Dental», Czech Republic«Lamikolor Cement» - «GC», Japan
FOR USE
FEATURES
PACKAGING
« »phosphate cement. Liquid contains orthophosphoric acid of low activity.
Fillings made of «Beladont» cement feature high mechanical strength (180-185 MPa) and chemical stability, low solubility.In case of deep and medium caries, isolating pad should be used for filling cavities.
Code 00000018 Powder - 50 g; Liquid - 30 g
Beladont silicophosphate cement is distributed as powder-liquid set. Powder is alumosilicate glass modified with a zinc-
PURPOSE« »
It is also used for filling milk teeth and teeth to be crowned. Beladont cement is used for filling frontal and side teeth.
9FILLING MATERIALS
BELACINSILICATE CEMENT
BELOCORPOLYCARBOXILATE
CEMENT
ANALOGUES «Silicin» - «Medpolimer», Russia «Fritex» - «Spofa Dental», Czech Republic
FOR USE
ANALOGUES «Adhesor Carbofine» - «Spofa Dental», Czech Republic«Carboco» - «VOCO», Germany
FOR USE
FEATURES
PACKAGING
« »solubility of enamel. Liquid contains orthophosphoric acid of low activity.
«Belacin» cement has some shades corresponding to A, B and C groups of VITA scale. The lustre, color and transparency of «Belacin» filling material are aesthetically similar to tooth tissues.
Code 00000019 Powder - 50 g; Liquid - 30 g
Belacin silicate cement is distributed as a powder-liquid set. Powder is fine alumosilicate glass with fluoride providing lower
FEATURES
PACKAGING
«Belocor» zincpolicarboxylate cement is obtained by mixing powder and liquid. The powder is modified zinc oxide, the liquid is water solution of poliacrylic acid.
The peculiarity of «Belocor» material is its adhesive quality and lower solubility, which makes it different from the zinc-phosphate cements. The material feature good adhesion to gold alloys, porcelain and cermet, it does not irritate the tooth pulp. Complexes of poliacrylic acid and tooth tissue proteins as well as high molecular weight of the acid provide lower diffusion in tissues and dentine canals. «Belocor» zincpolicarboxylate cement causes no pain, which is likely to appear at fixing crowns and bridge prostheses.
Code 00012580 Powder - 80 g; Liquid - 2 pc each 20 g
PURPOSE« »
case of cavity localization on vestibular and contact surfaces. Belacin cement is used for filling frontal and side teeth in
PURPOSE�for fixing inserts, different types of crowns, small dental
bridges;�for provisional filling;�as pads, which are to be covered with permanent
fillings made of amalgam and composites.
FILLING MATERIALS
CEMILINEGLASS IONOMER LINING CHEMICALLY-CURED CEMENT
ANALOGUES «GC Fuji Lining Cement» - «GC», Japan
FOR USE
FEATURES
PACKAGING
Filling material «CemiLine» is produced as a complete set powder-liquid. Powder is alumofluorinesilicate glass with increased content of fluorine, a liquid is solution of the modified polyacrylic acid. The prolonged selection of ions of fluorine promotes the remineralization of softened dentine, renders bactericidal action, effectively hinders to development of the second caries.
«CemiLine» material features high bio-compatibility with tooth tissues, good strength and high stability to acidic erosion, high radiopacity. Material conforms to requirements of GOST R 51744-2001.
Code 00007358 Powder - 20 g; Liquid - 10 ml; Conditioner - 10 ml
PURPOSE«CemiLine» glass ionomer lining dental cement with
increased fluorine secretion is used for prophylaxy of second carious and by:
�as isolating or basic pad under permanent filling made of composites and amalgams;
�temporary filling by postponed treatment of complicated forms of caries;
�hermetization of fissures.
10
11FILLING MATERIALS
CEMILINE-LCGLASS IONOMER LINING LIGHT-CURED CEMENT
ANALOGUES «GC Fuji Lining LC» - «GC», Japan
FOR USE
FEATURES
PACKAGING
« »tooth tissues as well as to polymeric materials, fluorine release and solidity.
«Cemiline-LC» powder is fine silicate fluoaluminic glass with increased contents of fluorine. «Cemiline-LC» liquid is composition comprising water solution of polyacrylic acid, oligomers and initiators of light
polymerization.«Cemiline-LC» meets the requirements of GOST R 51744-2001.
Code 00007327 Powder - 20 g; Liquid - 10 ml; Conditioner - 10 ml
Cemiline-LC glass-ionomeric light-cured cement is produced as powder-liquid set. The cement features high adhesion to
PURPOSE«Cemiline-LC» glass-ionomeric lining dental cement is
used for:�рrophylactic of second carious cavities;�as basic and isolating pad under permanent filling made of composites and amalgams;�temporary filling by complicated carious forms.
CEMILIGHTGLASS-IONOMER LIGHT-CURED CEMENT
ANALOGUES «Photac Fil» - «Espe», Germany«Aqua Cenit» - «VOCO», Germany«GC Fuji II LC Improved» - «GC», Japan
FOR USE
FEATURES
PACKAGING
«Cemilight» glass-polyalcenate light-cured cement is produced as powder-liquid set. The cement features high adhesion to tooth tissues as well as to polymeric materials, fluorine release and solidity.
It meets the requirements of GOST R 51744-2001.«Cemilight» powder is fine silicate fluoaluminic glass with radiopaque fillers. It has 4 shades, i.e. A2, A3, B2 and C2 according
to VITA scale. «Cemilight» liquid is composition comprising water solution of polyacrylic acid, oligomers and initiators of light polymerization.
The chemical reaction fluoroaluminium glass with polyacrilic axid provides building cement structure that promotes influence fluorine ions that effective prevents development of second caries.
It is not recommended to use «Cemilight» for direct covering of pulp. When pulp covering is needed and dentine thickness is less than 1mm, a treating pad based on calcium hydroxide should be
used (i.e.«Calcesil»).
Code 00002147 Powder (А2) - 20 g; ( 10 g х 3; Liquid - 10 ml х 2; Conditioner - 15 ml; Varnish «Aksil-LC» - 7 mlCode 00002624 Powder (А2) - 20 g; Liquid - 10 m; Conditioner - 10 ml; Varnish «Aksil-LC» - 5 mlCode 00002146 Powder (А3) - 20 g; Liquid - 10 m; Conditioner - 10 ml; Varnish «Aksil-LC» - 5 mlСode 00002625 Powder (В2) - 20 g; Liquid - 10 m; Conditioner - 10 ml; Varnish «Aksil-LC» - 5 ml
А3, В2, С2)
PURPOSE�restoration of carious cavities (I, II classes of Black);�restoration of milk tooth (all classes of cavities);�filling of V class cavities (when esthetic requirements
doesn't been as priority);�treatment of non-carious affection of tooth hard
tissues (wedge shaped defects, enamel erosion);�as isolating pad under permanent filling made of
composites and amalgams.
12FILLING MATERIALS
CEMIONGLASS-IONOMER CEMENT
ANALOGUES «Ionofil» - «VOCO», Germany«Ketac Fil Plus» - «Espe», Germany«Fuji-ll» - «GC», Japan
FOR USE
ANALOGUES «Ketac Molar Art» - «Espe», Germany
FOR USE
CEMION-ARTGLASS-IONOMER CEMENT
FEATURES
PACKAGING
«Cemion» glass-ionomer chemically cured radiopaque cement features good chemical adhesion to enamel and dentine. «Cemion» filling material is obtained by mixing powder and liquid. The powder is fine fluoroaluminum glass. The liquid is water
solution of modified polyacrylic acid. Glassionomer reaction starts immediately after mixing followed by leakage of fluorine ions strengthening dentine and
featuring bactericidal effect. The material prevents formation of secondary caries. «Cemion» material features high bio-compatibility with tooth tissues, good strengh and high stability to acidic erosion, high
radiopacity.The powder has A2, A3, B2, C2 and C4 shades according to VITA scale.
Code 00001565 Рowder (А2) - 20 g; (А3, В2, С2) 10 g х 3; Conditioner - 15 ml; Liquid - 13 ml х 2; Varnish - 15 mlCode 00001197 Powder (А2) - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 mlСode 00001334 Powder (А3) - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 mlСode 00001335 Powder (В2) - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 mlCode 00005072 Powder (С2) - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 ml Code 00001336 Powder (С4) - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 ml
FEATURES
PACKAGING
«Cemion-ART» powder is fine fluoroaluminum silicate glass containing modifying agents. «Cemion-ART» liquid is water solution of polyacrylic acid. After mixing powder and liquid, quick-hardening filling material is obtained.
The material features high compression strength, low solubility, high stability to acidic erosion, good chemical adhesion to enamel and dentine, long anti-carious effect due to fluorine ions leakage.
Code 00003525 Powder (А2, А3, В2, С2) - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 ml
PURPOSE «Cemion» glass-ionomer chemically cured radiopaque
cement is used: �for restoration of milk teeth (all cavities);�for filling cavities of the 1st and the 2nd classes;�for filling cavities of the 5th class;�for treating non-caries lesion of hard tissues;�for provisional filling;�for sealing of fissures;�for modeling tooth stump to be crowned;�for lining when filling with composites and amalgams;
PURPOSE
�for filling milk teeth (all cavities);�for filling cavities of the 1st and the 2nd classes;�for filling cavities of the 5th class;�for sealing of fissures;�for lining when filling with composites and amalgams;�for modeling tooth stump to be crowned.
Is used for atraumatic restorative treatment of tooth caries (ART-method) by means of handle treating carious cavity and minimal using drill machine. ART-method is used in dentistry including pediatric one.
13FILLING MATERIALS
FEATURES
PACKAGING
«Cemion-color» glass-ionomer chemically cured radiopaque cement features good chemical adhesion to enamel and dentine.
«Cemion-color» filling material is obtained by mixing powder and liquid. The powder is fine fluoroaluminum glass. The liquid is water solution of modified polyacrylic acid.
Glassionomer reaction starts immediately after mixing followed by leakage of fluorine ions strengthening dentine and featuring bactericidal effect. The material prevents formation of secondary caries. It meets to requirements of GOST R 51744-2001.
«Cemion-color» material features high bio-compatibility with tooth tissues, good strengh and high stability to acidic erosion, high radiopacity.
«Cemion-color» provides reliable regional seating, and bright painting facilitates the visual control of integrity of fillings.The powder of cement «Cemion-color» is produced four bright colors: blue, yellow, green and crimson.
CEMION - COLORGLASS-IONOMER COLOR CEMENT SERIES «KALEIDOSCOPE»
ANALOGUES «lonofil Color AC» - «VOCO», Germany
FOR USE
Code 00008907 Powder , 5 х 4; Liquid - 13 ml х 2; Conditioner - 15 ml; Varnish - 15 mlCode 00010288 Powder yellow - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 mlCode 00010289 Powder green - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 mlCode 00010291 Powder crimso - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 mlCode 00010290 Powder blue - 20 g; Liquid - 10 ml; Conditioner - 10 ml; Varnish - 10 ml
blue, yellow green, crimson - 1 g
PURPOSE«Cemion-color» glassionomer radiopaque filling material
is used for restoration of a dairy teeth (mainly to cavity I and II class).
COMPOCEMFILLING COMPOSITE CHEMICALLY CURED MATERIAL
ANALOGUES «Evicrol Original» - «Spofa Dental», Czech Republic«Evicrol hibrid» - «Spofa Dental», Czech Republic
FOR USE
FEATURES «Compocem» is a composite on organic bonding base (bis-GMA, TEG-DMA) and modified fine inorganic filler base.«Compocem»set powder-liquid contains powders of 4 colours i.e. A2, A3, B2 and C2 according to VITA scale.«Compocem» material is produced as set powder-liquid and dough-dough. The material has features (meet the
requirements of GOST R 51202-08):�high mechanical strength (bending strength: 110MPa; compression strength: 300MPa); �high diametrical strength (45MPa);
3�stability, low solubility in oral cavity (no more than 3 mkg/mm );�wearing stability.
PACKAGINGCode 00013443 «Powder-liquid» Powder(А2) - 40 g; (А3, В2, С2) - 10 g х 3; Liquid - 26 g; Gel for enamel etching - 7 g х 2Сode 00003521 «Dough-dough» (one of color А2, А3, В2); Basic dough - 5 g; Catalyst - 5 g;
Gel for enamel etching - 5 ml; Adhesive (liquid №1) - 5 ml; Adhesive (liquid №2) - 5 mlCode 00013530 «Dough-dough» - 3-colors Basic dough (А2, А3, В2) - 5 g х 3; Catalyst - 5 g х 3;
Gel for enamel etching - 5 ml; Adhesive (liquid №1) - 5 ml; Adhesive (liquid №2) - 5ml
PURPOSEIs used for filling (removing) carious cavities of the 2nd, 3d, 4th
and 5th classes.
14FILLING MATERIALS
DENTINE - DOUGHTEMPORARY FILLING
MATERIAL, EUGENOL-FREE
DENTINE - POWDER
TEMPORARY FILLINGMATERIAL
ANALOGUES «Cimpat» - «Septodont», France
FOR USE
ANALOGUES «Tempo» - «Raduga», Russia«Dentine-powder» - «Stoma», Ukraine
FOR USE
FEATURES
PACKAGING
«Dentine-powder» is water-plasticizable modified zinc-sulphate cement containing calcium. Main compounds are zinc oxide, zinc sulphate and calcium phosphates. When mixed with water, astrigent dough is obtained. Filling made of «Dentine-powder» is a good sealant for tooth cavity.
The material possesses knitting, drying action and has sour reaction, therefore it is not necessary to suppose contacts the material with a mucous surface of an oral cavity as non-cured material can cause irritation of soft tissues.
Code 00000028 / 00007746 Powder - 80 g / 200 g
PURPOSE«Dentine-dough» provisional filling material is used for
coating medicines in tooth carious cavities in case of treating caries.
PURPOSE «Dentine-powder» on water basis is used as provisional
filling material for coating medicines in tooth cavity when treating caries.
FE TURES«Dentine-dough» provisional filling material is based on powder of zinc-sulphate cement and dough-adjuster with dyes and
fragrances.The material is cured with oral cavity moisture during 2 hours. The dough provides tooth cavity hermetization, prevents teeth
from coloring when filling with amalgams, it is non-soluble in saliva.
PACKAGINGCode Dough without flavour - 50 gCode Dough - 50 gCode Dough - 50 gCode Dough citron - 50 gCode Dough - 50 gCode Dough - 50 g
15FILLING MATERIALS
DENTLIGHTSET OF FILLING COMPOSITE MICROHYBRID MATERIAL OF LIGHT CURED
ANALOGUES «Filtek-Z250» - «3M ESPE», USA«Prizma» - «Dentsply», USA«Renew» -« Bisco», USA
FOR USE
FEATURESMicrohybrid composite «DentLight» is on the basis of high-strength polymeric matrix, containing BIS-GMA, urethane and
other olygomery and modified fine inorganic loading (about 80 mas.%). Composite is cured under action of light in area of wave-lengths 400-500 nm. Powdery radiopaque loading has the special multilevel distributing on the sizes of particles from 0.02 to 0.7 mkm, which allows to attain optimum results in combination of technologicalness, durability and aesthetically beautifulness of material.
Microhybrid composite«DentLight» possesses the maximum-high indexes of the durability, promoted colorstability and comfortable plasticity which does him light by modelling.
PACKAGING Code 00008199 (12-colors) Dough A2
Fluid composite «DentLight»-flow -(А2) - 2 g; Adhesive one-component «DentLight» - 5 ml;Etching gel for enamel and dentine on organic base - 3 ml
Code 00009242 (ОА1) - 4,5 g; Code 00009293 (ОА2) - 4,5 g;Code 00009294 (ОА3) - 4,5 g; Code 00009295 (ОА3,5) - 4,5 g; Code 00009296 (ОВ2) - 4,5 g; Code 00009297 (ОВ3) - 4,5 g; Code 00009298 (ОС2) - 4,5 g;Code 00009238 (Ea2) - 4,5 g;Code 00009239 (Eb1) - 4,5 g; Code 00009240 (Eb2) - 4,5 g; Code 00009241(EC2) - 4,5 g; Code 00008903 cutting edge - 4,5 g
(ОА1, О , ОА3,ОА3,5, ОВ2, ОВ3, ОС2, ЕА2,ЕВ1,ЕВ2,ЕС2) - 4,5 g;
Code 00008198 (5-colors) Dough (ОА2, ОА3, ОВ2, ЕА2, ЕВ2) - 4,5 g x 5 pc., Fluid composite «DentLight»-flow (А2) 2 g; Adhesive one-component «DentLight» 5 ml; Etching gel for enamel and dentine on organic base - 3 ml
PURPOSE Is used for restoration of cavities of teeth of the I-V classes
of Black.
А1 А2 А3 А3,5 В1 В2 В3 С2 Opaque + + + + + + + Enamel + + + + + +
STRESS-STRAIN PROPERTIESBending strength – 120 MPaBursting strength – 45 MPa Compressive strength – 300 MPa
3Water solubility – 0,6 mkg/mm3Water absorption – 13,0 mkg/mm
Hardening depth (20 sec.) – 3,0 – 6,0 mm
Composite has a wide color range on the scale of VITA and possesses three-level transparency for the imitation of dentine, enamel and tooth cutting edge.
16FILLING MATERIALS
DENTLIGHT-flowLIGHT-CURED LIQUID COMPOSITE MATERIAL
ANALOGUES «АELITEFLO» - «Bisco», USA«Filtek Flow» - «3M ESPE», USA
FOR USE
FEATURES
PACKAGING
«DentLight»-flow liquid composite material is light-cured dough of low viscosity (different shades according to VITA scale A2, A3, A3.5, B2, C2, half-transparent/cutting edge). The dough is based on polymer bonding agent and modified fine filler.
The composite features good flowability providing its even application to cavity walls.The composite «DentLight»-flow is compatible to all light-cured composites and compomers and can be used in combination
with above mentioned materials. Using of enclosed needles for direct application allows to fill the material direct into prepare cavity.
Сode 00008904 Dough ( A2) - 2 gСode 00009299 Dough ( A3) - 2 gСode 00009300 Dough ( A3,5) - 2 g
PURPOSE«DentLight»-flow liquid light-cured composite is used for:�as lining by composite filling;�filling cavities of the 5th class;�restoration of small defects of enamel;�sealing of fissures;�splinting of mobile tooth with reinforced glass fiber;�preparation of small defects of ceramic and composite veneers;�esthetic correction of composite restoration.
ONE-COMPONENT LIGHT-CURED ADHESIVE
MOISTENING AGENT
ANALOGUES «One-step» - «Bisco», USA
FOR USE
ANALOGUES «AQUA-PREPF» - «Bisco», USA
FOR USE
FEATURES
PACKAGING
One-component light-cured adhesive «DentLight» contains methacrylate oligomers (HEMA, UDMA), polymerization activators, stabilizers and solvents.
Adhesive «DentLight» is completely wets the surface of dentine and easily penetrates the dentinal tubules. Polyfunctional monomers that make up the adhesive, contribute to the formation of chemical bond with tooth tissues and the formation of retention of polymer strands in the dentinal tubules.
Adhesive «DentLight» provides a strong bond, based on chemical adhesion, reliable accuracy of fit and reduces the risk of a recurrence of bacterial infection.
Adhesive «DentLight» can be used in conjunction with any light-cured composite materials.
Codе 00008905 Adhesive - 5 ml
PURPOSELight-cured adhesive «DentLight» is used for lasting
connection (adhesion) light-cured composite materials with tooth hard tissues.
PURPOSE«DentLight»-aqua is used for additional moisture of
dentine before applying the hydrophilic adhesive systems.
FEATURES
PACKAGING
Moistening agent «DentLight»-aqua is an aqueous solution of hydroxyethyl methacrylate (HEMA), containing fluorinating additive and antiseptic.
«DentLight»-aqua keeps the dentine surface moist, preventing the decay of the collagen fibers and increasing their permeability to hydrophilic (acetone-or alcohol-containing) adhesive resins. «DentLight»-aqua wets effectively the surface of dentine and creates a zone of suppression of caries in adjacent tooth structure.
Code 00009304 Liquid - 5 ml
DENTLIGHT-aqua
DENTLIGHT - adhesive
Сode 00010059 Dough ( В2 - 2 gСode 00010060 Dough ( С2) - 2 g
17FILLING MATERIALS
EODENTquick-hardening
ZINCOXIDE-EUGENOL CEMENT
ANALOGUES «IRM» - «Dentsply», USA «Zinoment» - «VOCO», Germany
FOR USEFEATURES
«Eodent» quick-hardening dental material is produced as powder/liquid set.
«Eodent»powder contains zincoxide, radiopaque filler and
PACKAGINGСode 00001044 Powder - 25 g; Liquid - 8 ml
«Eodent quick-hardening features good edge fitting and low solubility. The liquid contains catalyst providing hardening of the material in canal during 4-6 minutes.
»
PURPOSE «Eodent quick-hardening» dental material is used as an
isolating pad under all types of fillings except composites. It is also used for provisional fixing crowns and provisional filling when treating caries.
IZOLINELIGHT CURED LINING COMPOMER MATERIAL
ANALOGUES «Ionoseal» - «VOCO», Germany«Ionosit» - «DMG», Germany
FOR USE
FEATURES
PACKAGING
«Izoline» - one-component light cured radiopaque compomer material containing hydroxyapatite, glass ionomer filler, polymeric binder, initiators and activators of polymerization.
«Izoline» possesses fluoro-emission, stability and low solubility, thermo-isolation properties, and also chemical affinity to polymeric materials which provides a high degree of coupling with composites. «Izoline» allows to compensate the internal pressure arising during polymerization shrinkage of composite materials. The controlled short hardening time and nozzles for direct applying create additional convenience in use of material.
Code 00010402 Dough - 2 g
PURPOSE«Izoline» is used as a lining (indirect isolation of a pulp)
under composite restorations.
hydroxiapatite providing bone tissue regeneration.
«Eodent» liquid contains eugenol with plasticizer providing low solubility (no more than 0.5%) of the material.
LIGHT-CURED COLOR-CORRECTOR
ANALOGUES «Biscolor» - «Bisco», USA«Tetric color» - «Ivoclar Vivadent», Liechtenstein«Kolor plus» - «Keer», USA
FOR USE
PURPOSELight-cured color-corrector «DentLight»-color is used for
create shades and toning various parts of composite restoration (cutting edge, cervical region, fissures, etc.).
FEATURES
PACKAGING
Color-corrector «DentLight»-color is a low viscosity intensely colored light-cured different colors composite doughs that are compatible with all light-cured restoration composites.
Color-corrector «DentLight»-color can extend the color gamut of restorative materials and to give even more natural restoration.
Сode 00008906 Dough white - 1 mlСode 00009301 Dough brown - 1 mlСode 00009302 Dough ochre - 1 ml
Color-correctors are produced in the following colors: white, brown, ochr . e
DENTLIGHT-color
18FILLING MATERIALS
TEMPOPHOTDENTAL LIGHT CURED MATERIAL FOR
PROVISIONAL FILLING
ANALOGUES «Temp it» - «Spident», Korea«Сlip» - «VOCO», Germany
FOR USE
UNICEM,UNICEM
bactericidalZINC-PHOSPHATE CEMENT
ANALOGUES «Adhesor» - «Spofa Dental», Czech Republic«Poscal» - «VOCO», Germany«Zn Phosphate» - «PSP Dental», England
FOR USE
FEATURES
PACKAGE
«TempoPhot» is a light cured composite material based on polyurethane-acrylate and fine filler. The structure of dough «TempoPhot» includes:
� light cured activators; � stabilizators; � technological additives for optimum consistency; � antibacterial agent (chloride benzalkonium).
Cured material «TempoPhot» has balanced properties of hardness and elasticity, which ensures the stability of the seals on the period of temporary filling, and allows for this easily and without residue to remove material from the cavity.
Code 00009196 Dough - 3 g
FEATURES
PACKAGE
«Unicem» material is zinc-phosphate dental cement featuring high mechanical strength and chemical stability. Compressive strength is equal to 90MPa (when fixing, powder to liquid ratio is 1,5:1), 121MPa (when filling, powder to liquid ratio is 2:1). The cement is obtained by mixing powder containing zincoxide and modifying agents with liquid represented by orthophosphoric acid of low activity. Film thickness for filling is no more than 25 mkm.
Code 00001456 Powder white zincphosphate -100 g; Liquid - 60 gCode 00002331 Powder gold-yellow zincphosphate -100 g; Liquid - 60 gCode 00002332 Powder light -yellow -100 g; Liquid - 60 gCode 00000388 Powder white zincphosphate - 50 g; Liquid - 30 gCode 00002333 Powder gold-yellow - 50 g; Liquid - 30 gCode 00002334 Powder light -yellow - 50 g; Liquid - 30 gCode 00006633 Powder baktericidal with dioxidin - 50 g; Liquid - 30 gCode 00000133 Powder baktericidal with silver - 50 g; Liquid - 30 g
PURPOSE«TempoPhot» is used as a temporary filling material for the
isolation of the cavities under the tab or cover a drug into the tooth cavity in the treatment of caries.
PURPOSE«Unicem» zinc-phosphate 3-coloured cement is used for
fixing inserts, pinned teeth, plastic, metal, porcelain, cermet crowns and bridge prostheses as well as for filling teeth to be crowned. It is also used as isolating pad when filling with amalgams, silicate and silicophosphate cements.
«Unicem bactericidal» is used in pediatric dentistry for filling milk teeth.
LIQUIDS AND GELS
FOR TREATING
ROOT CANALS
MATERIALS FOR TREATING
AND FILLING
ROOT CANALS
BELODEZ (NATRIUM HYPOCHLORITE)
BELSOL №2
BELAGEL-О-ENDO
COLOR-TEST №4
CRESODENT LIQUID
ENDASEPT
ENDOZHY
ENDOGEL
GUTTADENT
PULPEVIT
SOLVADENT
DEVITALIZING DOUGHS
DEVIT - ARS, P, S
APEXDENTWITH IODOFORM / WHITHOUT IODOFORM
ARMODENT
CALCESEPT
CALCEVIT POWDER
CUPRODENT
CRESODENT DOUGH
DEVIT - А
EODENT LONG-HARDENING
IODENT HARDENING / NON-HARDENING
OXIDENT
PULPODENT
PHOSPHADENT
PHOSPHADENT-BIO
RESODENT
SILDENT
STIODENT
TIEDENT
TRICREDENT
TRIOXIDENT
VIEDENT
ENDODONTIC DENTAL MATERIALS
19
ENDODONTIC DENTAL MATERIALS
APEXDENTMATERIAL FOR FILLING ROOT CANALS
ANALOGUES«Vitapex» — «Nippon Shika Yakohin», Japan«Metapex» — «Meta Dental», South Korea«Metapaste» — «Meta Dental», South Korea
PURPOSE
FEATURES
«Apexdent» iodoform-free dental material is used for apexofication of tooth with non-complete root growth and wide apex hole. It is also used for treating chronic periodontitis of permanent teeth.
«Apexdent» iodoform-free dental dough contains calcium hydroxide and features radiopacity, high pH level (12,5) and long aseptic effect.
«Apexdent» usage provides root growth and formation of apical osseous cement barrier during 9-15 months.The material can be used for treatment of milk tooth roots with non-formed apex in case of periodontitis.When treating chronic periodontitis, the permanent filling of root canal is possible in 3-6 weeks.
«Apexdent» dental material is produced as dough on calcium hydroxide base:
�iodoform for filling canals when treating periodontitis;�iodoform-free for teeth apexofication and treatment of
chronic periodontitis.
PURPOSE«Apexdent» with iodoform dental material is used for
filling root canals after depulping and for treating infected canals in case of chronic periodontitis. It is also used for teeth apexofication in case of periodontitis, in case on non-formed apex, tooth perforations and bone resorption.
FEATURES
PACKAGING
«Apexdent» with iodoform dental dough is a long-hardening material (analogue to «Vitapex»). The dough comprises:
�iodoform (40%) providing long bactericidal effect;�calcium hydroxide and phosphates (pH=12,8);�dough-adjuster and radiopaque filler.
Сode 00001736 Dough with out iodoform - 2 gСode 00001344 Dough with iodoform - 2 g
20
FOR USE
ARMODENTSET FOR REMOVAL OF TOOTH TISSUES USING INTRACANAL GLASSFIBER PINS
BELAGEL-O (ENDO)
WHITENING DOUGH
ANALOGUES «Endoperox»,— «Septodont», France
FOR USE
ANALOGUES «DC Light Post» —«Estade- Servicegroup», Russia«D.T. Light Post» —«Bisco», USA«Glassix» —«H. Nordin SA», Sweden
FOR USE
FEATURES
PACKAGING
The glassfiber pins «Armodent» is made from the wattled glass fibres of linked methacrylate olygomer BIS-GMA and increased by pyrogenic dioxide of silicon. Glassfiber pins allow to create a stand for restoration construction. Chemical affinity of olygomer matrix of pins to composite materials is instrumental in the increase of adhesion and provides monolithic nature of restoration.
The pins possesses the following descriptions:�the module of elasticity of pin is near to the module of elasticity of tooth (dentine);�a fiberglass provides the redistribution of the mechanical loadings, that reduces the risk of dissidence of tooth;�transparency of pin allows to apply light curing materials or materials of double curing for his fixing;�transparency of pin allows to mask not him, at aesthetic removal of tooth.
The presence of pins of different sizes and types:�cylinder-conic (Ø1,0; 1,2; 1,4 mm);�cylindrical Ø1,8 mm;�plane plates (2,0 x 1,0 mm; 2,4 x 1,0 mm; 4,0 x 1,0 mm).
One-component adhesive «DentLight» and fixing composite cement of double curing «Compofix» provide the durable coupling and reliable regional adjoining based on chemical adhesion during restoration of anatomic form of tooth.
Code 00008909 Glassfiber pin - 3х6pc; Composite cement for fixing «Compofix» - 2 pc 3,5 g each;One-component adhesive «DentLight» - 5,0 ml; Etching gel for enamel and dentine on organic basis - 3,0 ml;
Code 00008910 Glassfiber pin (Ø=1,0 mm) - 10 pcCode 00008911 Glassfiber pin (Ø=1,2 mm) - 10 pcCode 00008912 Glassfiber pin (Ø=1,4 mm) - 10 pc
Glassfiber pins and glassfiber balks are produced separately.
FEATURES
PACKAGING
«Belagel-O» (endo) is dough based on soft whitener carbamide peroxide – 60% (equivalent 22% peroxide). Carbamide
peroxide – oxidant which can in the presence of physiological fluids to form active oxygen under the action of which is the splitting of
organic matter that color the tooth.Whitening dough has a bactericidal action.
Code 00008914 Dough - 1,5 g
PURPOSE:Set «Armodent» is intended for removal and strengthening
of crown of the tooth by intracanal glassfiber pins after endodontic treatment (at the small overgingival defect of one of walls of tooth) and before prosthesis. It is recommended to apply at once after removal of tooth pulp.
PURPOSEDough «Belagel-O» (endo) is used for intracanal and
intracrown whitening of pulpless teeth.
21ENDODONTIC DENTAL MATERIALS
BELODEZ3%, 5,2% AND 10% WATER SOLUTIONS
AND GEL TREATMENT OF ROOT CANALS
ANALOGUES «Parcan» — «Septodont», France
FOR USE
FEATURES
PACKAGING
«Belodez» stabilized solution (gel) of sodium hypochlorite dissolves dentine organic basis (alive and necrotic tissues), so that the canal can be expanded. Gel facilitates antiseptic treatment of upper teeth canals due to its viscosity minimizing mucosa burn.
The material (pH 10,0-12,0) features bactericidal effect on all the gram-positive and gram-negative bacteria, fungi and virus. It is not cytotoxic on the apex level.
«Belodez» effect depends on hypochlorite concentration.3% sodium hypochlorite dissolves pulp remains after vital extirpation. Mummified pulp after medical devitalization is
dissolved by means of 5,2% or 10% solution. But this hypochlorite concentration may cause tissues destruction. Treatment procedure time should not exceed 60 sec.
Superficial layer appeared after instrumental treatment of canals, can be removed using sodium hypochlorite in combination with EDTA («EndoZhy № 2», «EndoGel»). That provides effective cleaning of infected canals and their expansion, higher adhesion of filling materials to canal walls.
When diluting 10% «Belodez» with distilled water in ratio 1:2, 3.3% solution is obtained.
Code 00003083 Liquid (3%) - 100 ml Code 00015605 Liquid (3%) - 250 ml Code 00003078 Liquid (3%) - 30 mlCode 00001571 Cel (3%) - 3 gСode 00001358 Liquid (5,2%) - 100 ml Code 00001067 Liquid (5,2%) - 30 mlСode 00005923 Liquid (10%) - 30 ml
PURPOSE«Belodez» dental material based on stabilized solution of
sodium hypochlorite is available is liquid (3%, 5.2% and 10%) and gel (3%).
3% solution and gel are used as bactericidal, styptic and whitening material for medical treatment of root canals, for canal chemical expansion in combination with EDTA and for tooth cavity disinfectioning.
5,2% and 10% solutions are used for treatment of canals with pulp diathermocoagulation or pulp coagulation by means of effective medicines. The solutions are also used for disinfection of metal and guttapercha points and different dentures before their fixation.
22ENDODONTIC DENTAL MATERIALS
BELSOLSET OF DENTAL LIQUIDS FOR ORAL CAVITY
MUCOSA TREATMENT
ANALOGUES «Сalypso» — «Septodont», France
FOR USE
FEATURES
PACKAGING
Liquid-concentrate № 2 contains bigluconate chlorhexidine (2%) featuring bactericidal effect.
Code 00002139 Liquid - concentrate №2 - 125 ml
PURPOSE«BelSol» set of liquids is used for antiseptic and
prophylactic treatment of oral cavity. «BelSol» set of liquids comprises:�Liquid-concentrate № 1 used for hygienic and
prophylactic rinsing before visiting dentist or preparing dental impressions (see part «Prophylactic dental materials»);
�Liquid-concentrate № 1 with fluorine used for fluorination and prevention tooth caries and periodontics (see part «Prophylactic dental materials»);
�Liquid-concentrate № 2 used for prophylactic rinsing and antiseptic treatment of mucosa in cases of gingivitis and parodontitis;
�Liquid-concentrate № 3 used for rinsing in cases of mucosa inflammation, gingivitis and parodontitis (see part «Treating dental materials»).
23ENDODONTIC DENTAL MATERIALS
CALCESEPTSET OF SUSPENSIONS BASED ON CALCIUM HYDROXIDE
ANALOGUES «Calasept» — «Nordiska», Sweden
FOR USE
FEATURES
PACKAGING
Dental set «Calcesept» is a highly dispersed sterile dough-suspensions: � suspension № 1, contains in isotonic solution calcium hydroxide (41%), radiopaque component - barium sulfate � (at least 8%); � suspension № 2, contains in isotonic solution calcium hydroxide (41%), barium sulfate (at least 8%) and addition with copper ions, bactericidal addition against all kinds of microorganisms.Suspensions are made by special technology for highly dispersed stabilized systems. High alkalinity suspensions (pH 12.4)
provide sterility in the contact area and stimulates bone formation. Bacterial action of highly dispersed calcium hydroxide (suspension № 1) is due to alkaline proteolysis and microorganism saponification. Calcium hydroxide stimulates the formation of mineralized tissues by root teeth fracture and applies on purpose of consolidation peaces or incapsulation and bone structure reconstruction in the trauma area by strong stimulation of osteoblastic process and by closing of perforations in crown part of teeth, in the area of bifurcation and trifurcation and on either level of root canal. By filling canals with dough is full filling of root end by the stimulation of cementoblast layer. This process finally is finished within 8-12 months. By deep caries (when pulp is too closely and there are much infected soft dentine) application with sterile calcium hydroxide at 6-8 weeks direct to infected dentine leads to protection dentinal layer in response to irritator (calcium hydroxide) by pulp side.
Antibacterial action of copper ions (suspension № 2) is much higher than the effect of calcium hydroxide (suspension № 1). Copper ions are capable of combining with sulfur amino acids from protein breakdown and formation of difficulty soluble copper sulfide, affect the oxygen transfer process of anaerobic micro-organisms. By that the freely soluble compound (copper sulfate) is formed, dissociating with the formation of copper ions, can destroy the aerobic and an-aerobic organisms by extracting from them the sulfur. The resulting difficulty soluble copper sulfide continuously is regenerated to the active substance (copper sulfate).
Code 00021077 Suspension №1 - 2,5 g; Suspension №2 - 2,5 g
PURPOSEDental set «Calcesept» is used for: �processing of infected root canals in permanent teeth; � treatment of difficult and problem canals; � indirect pulp isolation for deep cavities; �direct protective coating of pulp with calcium
hydroxide, as well as medical calcium laying in deep cavities;
�canal treatment of milk teeth and teeth with unformed roots;
CALCEVIT - powderRADIOPAQUE CONTAINING CALCIUM MATERIAL
PURPOSE «Calcevit» powder is used as therapeutic pad for
regeneration of traumatic and inflamed pulp in case of pulpitis (traumatic, acute serous, chronic fibrous). It is also used as a pad under permanent fillings when treating deep caries.
FEATURES
PACKAGING
«Calcevit» dental material is produced as dough or powder to be mixed with distilled water until homogenous dough is obtained.
Calcium hydroxide is the main component of the material featuring high pH level (12.5), long bactericidal effect, radiopacity, pulp regeneration, secondary dentine formation, capacity to penetrate deeply into dentine canals and to seal them due to dough-adjuster on water base.
Сode 00001774 Powder - 7 g
ANALOGUES «Calcium Hydroxide Powder» — «PD», Switzerland
FOR USE
�
media and to restoration in pere-apical tissues of normal bone structure instead of pathologic tissues (granuloma or granulation);
filling of canals by granulating and granulomatous periodontitis to disinfect of canals, keeping constantly high alkaline
�
�step-by-step and multiple processing in cases of high activity of microbial flora for full making of sterile media in dentine.treatment of periodontitis, gingivitis (as a strong bactericidal properties);
�
�treatment of pulpitis by the biological method of teeth with filling of root canals by restoration at the perforations and cracks;
saving of root pulp;
24ENDODONTIC DENTAL MATERIALS
CRESODENT-liquid
CRESODENT-dough
ANTISEPTIC LIQUID
DOUGH FOR FILLING CANALS
ANALOGUES «Cresopate» — «Septodont», France
FOR USE
ANALOGUES «Cresophene» — «Septodont», France
FOR USE
FEATURES
PACKAGING
«Cresodent-VladMiVa» dental liquid is widely used as an active antiseptic of local action when endodontic operations take place. The material is a liquid containing:
•chlorophenol, i.e. active bactericidal substance;•camphor featuring antiseptic and sedative effect and softening phenol action;• dexamethasone (0,1%) featuring anti-inflammatory and anti-allergic effect for quick reduction of pain.The material does not irritate periapical tissues if not mixed with other substances. Due to low surface tension coefficient, the material is volatile and penetrates quickly into dental small canals. «Cresodent-
VladMiVa» liquid preserves its properties when contacting blood, serum and proteins.
Code 00000066 / 00012622 Liquid - 5 ml / 15 ml
FEATURES
PACKAGING
«Cresodent-VladMiVa» dough contains no formalin, the material does not irritate periapical tissues. Antiseptic base of dough comprises para-chlorophenol featuring bactericidal effect on bacteria and virus due to denaturation of microorganism proteins.
«Cresodent-VladMiVa» dough contains camphor and zinc sulphate – i.e. antiseptic featuring styptic effect.
«Cresodent-VladMiVa» dough is radiopaque, it fills the canal completely. Hardening time is 24-78 hours.
Code 00000067 Dough - 25 g
PURPOSE «Cresodent-VladMiVa» dental liquid is used for antiseptic
treatment of infected canals.
PURPOSE«Cresodent-VladMiVa» dough is used for filling infected
and difficult canals as well as for filling canals with partial pulp extirpation.
COLOR-TEST № 4ENDODONTIC INDICATOR
FEATURES
PACKAGING
«Color-Test № 4» liquid contains fuchsin as a diagnostic indicator, coloring demineralized and irregular dentine formed during long period of time and reduced volume of pulp changing canal structure and form.
In case of canal sclerotic changes, pulp cavity should be cleaned, washed and dried with warm airflow. 1-2 drops of «Color-Test № 4» liquid should be introduced into cavity for 40-60 sec. and then washed. Dentine should be colored more intensely than other hard tissues. That facilitates canal mouth revealing and canal opening.In case of endodontic treatment, «Color-Test № 4» liquid can be used more than once.
Code 00001727 Liquid - 5 ml
PURPOSE«Color-Test № 4» liquid is used for determining sclerosed
canals and canal mouth of complicated morphology, as well as in case of calcification and bad patency of canals.
25ENDODONTIC DENTAL MATERIALS
CUPRODENTSET FOR TREATING AND FILLING ROOT CANALS
ANALOGUES «Atacamit», — «HUMANCHEMIE», Germany
FOR USE
«Cuprodent» dental set contains:�suspension № 1 based on copper-calcium hydroxide;�suspension № 2 based on calcium hydroxide;�powder containing copper-calcium hydroxide.
PURPOSE
FEATURES
PACKAGING
«Cuprodent» dental set is used for: �treating (washing) infected root canals of permanent teeth;�treating difficult canals using electro(depo)phoresis;�non-direct covering pulp with calcium hydroxide, and as treating calcium-containing liner in deep cavities;�treating canals of milk teeth and teeth with non-formed roots;�filling root canals after all types of treatment including electro(depo)phoresis;�after treating parodontitis and gingivitis.
«Cuprodent» dental set is a system with highly active hydroxicuprate featuring bactericidal effect on all microorganisms. High alkalinity of suspensions (pH 12,8-13,3) provides sterility of contact areas.
«Cuprodent» suspension № 1 is a solution of copper-calcium hydroxide and hydroxocuprate. The suspension is stabilized, it has water base providing usage of the suspension in any level of solving with distilled water according to usage method. The suspension provides high bactericidal effect of copper ions (concentration is 1,7-2,3%).
«Cuprodent» suspension № 2 is a solution of calcium hydroxide in distilled water with stabilizers. Calcium hydroxide stimulates formation of mineralized tissue.
When using electrophoresis, hydroxocuprate ions turn into low soluble copper hydroxide providing sterilization of canals and apical delta. «Cuprodent» material is applicable to all types of equipment used for electro(depo)phoresis treatment.
After treating infected canals with copper-calcium hydroxide using electro(depo)phoresis method, the canals should be filled with «Cuprodent» dough. The dough is obtained by mixing powder with suspension № 2. as a result, alkaline long-hardening material is obtained featuring disinfecting activity.
Code 00001574 Suspension №1 - 20 g; Suspension № 2 - 20 g; Powder - 10 gCode 00001847 Suspension №1 - 20 gCode 00001958 Suspension №2 - 20 gCode 00001893 Powder - 10 g
DEVIT-AANAESTHETIC DOUGH
ANALOGUES «Anesthopulpe» — «Septodont», France«Pulparthrol» — «Pierre Rolland», France
FOR USE
FEATURES
PACKAGE
«Devit-A» dough contains:�lydocaine hydrochloride – i.e. anaesthetic,�chlorophenol, eugenol, camphor – i.e. phenol antiseptic, �dough-adjuster and filler providing fibrous structure of the material.
Code 00003933 Dough - 3 g
PURPOSE«Devit-A» dough is used as an anaesthetic and antiseptic
compress in case of pain when treating caries.
26ENDODONTIC DENTAL MATERIALS
DEVIT-PARSENICLESS PEDODONTIC DOUGH FOR PULP
DEVITALIZATION
ANALOGUES «Caustinerf pedodontique» — «Septodont», France
FOR USE
FEATURES
PACKAGING
«Devit-P» devitalizing dough contains:
�paraform – i.e. antiseptic providing pulp devitalization;
�lydocaine hydrochloride – i.e. anaesthetic reducing pain;
�chlorophenol, camphor and menthol – i.e. antiseptic compounds;
�dough-adjuster and filler providing fibrous structure of the material.Pulp devitalization of provisional teeth is combined with sterilization procedure excluding pulp extirpation and preventing pain.
Code 00002213 Dough - 3 g
PURPOSE «Devit-P» dough is used for pulp devitalization and milk
teeth mummification, when pulp extirpation can be exclude.
DEVIT-SARSENICLESS DOUGH FOR PULP DEVITALIZATION
(OF STRONG EFFECT)
ANALOGUES «Depulpin» — «VOCO», Germany«Сaustinerf» — «Septodont», France
FOR USE
FEATURE
PACKAGING
«Devit-S» arsenicless dough contains:�paraformaldehyde - i.e. antiseptic providing pulp devitalization,�lydocaine hydrochloride - i.e. anaesthetic reducing pain,�creosote - i.e. bactericidal component, �dough-adjuster and filler providing fibrous structure of the material.
«Devit-S» material provides long and painless pulp devitalization. It excludes usage of materials neutralizing arsenic salts when using arsenious dough.
Code 00000742 Dough - 3 g
PURPOSE «Devit-S» dough is used for pulp devitalization when
treating pulpitis using mortal extirpation or amputation method, for treating root pulpitis of temporary and permanent teeth. It is also used as additional devitalizing medicine at the secondary treatment after using arsenic doughs.
DEVIT-ARSARSENIC DOUGH FOR PULP DEVITALIZATION
ANALOGUES «Arsenic» — «Omega», Georgia«Arsedent» — «Spofa Dental», Czech Republic
FOR USE
FEATURES
PACKAGING
«Devit-ARS» dough contains:�arsenious anhydride (30%) providing quick necrosis of pulp fibers; �lydocaine hydrochloride reducing tissues sensitivity;
�chlorophenol, methacresol, eugenol – i.e. antiseptics;
�fibrous filler and dough-adjuster providing material plasticity.Pulp devitalization is fulfilled within 24-48 hours depending on tooth structure (single-root or multi-root), dough quantity,
density of dentine layer covering pulp in case of non-direct contact with dough.�Time of material present in tooth cavity should not exceed 72 hours.�To avoid arsenious necrosis, the patient should ask for dentist's consultation in case of dough leakage.
Code 00002330 / 00007486 Dough - 3,0 g / 6,5 gCode 00002142 Dough - 100 unidoses 4 mg each
PURPOSE «Devit-ARS» dental dough is used for quick and painless
pulp devitalization.For dentistry only!
27ENDODONTIC DENTAL MATERIALS
ENDASEPT
DENTAL MATERIAL FOR TREATING INFECTED TOOTH CANALS
EODENTlong-hardening
ZINCOXIDEEUGENOL MATERIAL
ANALOGUES «Endodent», — «PSP Dental», England«Endomethasone N» — «Septodont», France
FOR USE
ANALOGUES «Grinazole» — «Septodont», France
FOR USE
FEATURES
PACKAGING
Gel «EndAsept» contains antiseptics: metronidazole (10 %), bigluconate of chlorhexidine (2 %), - actively overwhelming anaerobic flora of root canals.
Metronidazole possesses a wide spectrum of action concerning the elementary, obligate anaerobic bacteria (spore - and non-sporeformative), is active concerning bacteroides, phuso-bacteria, clostridia. The mechanism antimicrobial actions consists in connection nitrogroup metronidazole with microbic DNA and the termination in this connection synthesis of nucleinic acids. In the mixed anaerobic-aerobic environment metronidazole has overwhelming effect on aerobic bacteria as a result of decomposition of metronidazole bacteroides appear metabolites, overwhelming growth of aerobic bacteria.
Bigluconate of chlorhexidine is one of the most active local antiseptic, and has fast and strong bactericidal effect on gram-positive and gram-negative bacteria. The mechanism of action of bigluconate of chlorhexidine is connected with its surface-active properties – there is an infringement of permeability cytoplasmic membranes of microbes.
Owing to hydrophil basis gel is easily entered into canals, deeply impregnating dentinal canaliculus, and washed well away from canals by water.
Code 00010046 Gel - 10 g
PURPOSEGel «EndAsept» is used for temporary infilling the infected
canals at treatment of gangrenous pulpitis and chronic forms of a periodontitis, and also at a sharp periodontitis with necrotizing pulp.
Gel «EndAsept» is applied in cases of unsuccessful treatment by nonspecific antiseptics or pastes on the basis of antibiotics and of corticosteroids.
FEATURES
PACKAGING
«Eodent» long-hardening is produced as powder/liquid set. «Eodent» powder contains zincoxide, radiopaque filler and hydroxiapatite providing bone tissue regeneration.«Eodent» liquid contains eugenol with plasticizer providing low solubility (no more than 0.5%) of the material. «Eodent long-hardening» cement features long bactericidal effect, long working time (6-8 hours), high plasticity, long
hardening time (48-72 hours) and good sealing effect. The material is easily handled and can be easily removed from canal.
Code 00000138 Powder - 25 g; Liquid - 8 ml
PURPOSE«Eodent long-hardening» dental material is used in
dentistry including pediatric one for filling root canals.
28ENDODONTIC DENTAL MATERIALS
FEATURES
PACKAGING
«Endogel» dental set consists of:•gel №1 on EDTA base;•gel №2 comprising EDTA and peroxide.
EDTA component provides friable structure of hard tissues, facilitates revelation of calcificated canals, cleaning and formation of difficult canals.
«Endogel» material is produced as a gel, that facilitates its introduction into tooth root canals of the upper jaw. Gel is also a good lubricant for dental instruments and can be easily washed off as well.
«Endogel» gel №1 contains centimonium bromide – an antiseptic with strong bactericidal effect. «Endogel» gel №2 contains EDTA with peroxide (10%). When used with sodium hypochlorite solution, gel provides foam
formation in canal, removal of alive and necrotic pulp and dentine tissues, improves teeth color and glitter due to bleaching.Before using gels, tooth should be thoroughly isolated.
Code 00002156 / 00002157 Gel №1 - 5 ml / 20 g / 9 gCode 00002158 / 00002159 Gel №2 - 3 ml / 20 g / 9g Produced separately
ENDOGELGELS FOR CHEMICAL EXPANSION OF
DIFFICULT ROOT CANALS
ENDOZHYSET OF LIQUIDS FOR ROOT CANAL TREATMENT
ANALOGUES «RC-Prep» — «Premier», USA
FOR USE
ANALOGUES «Largal Ultra» — «Septodont», France«Edetat, Solution» — «Pierre Rolland», France«Canal - plus» — «Septodont», France
FOR USE
PURPOSE «Endogel» dental set is used for mechano-chemical
expansion, cleaning, formation and antiseptic treatment of difficult root canals.
PURPOSE AND FEATURES
PACKAGING
«EndoZhy» endodontic liquids are used for: «EndoZhy № 1» – degreasing and dehydrating root canals, it contains neither diethyl ether nor ethanol and evaporates very
quickly. «EndoZhy № 2» – revealing and expansion of canal mouth, it contains mixture of EDTA potassium and sodium salts (17%)
and centimonium bromide – i.e. antiseptic surfacant providing foam adjustment and quick penetration of the material into microcanals and preventing sinkage of dentine filings.
«EndoZhy № 3» - antiseptic treatment of canals before their filling, it contains glutaric aldehyde. «EndoZhy № 4» – stopping root canal bleeding, it contains aluminum chloride. «EndoZhy № 5» – for rinsing tooth root canals and for help their mechanical cleaning, effectively at cleaning of canal from
the remains of calcium hydroxide, contains citric acid (40%), which completely removes the remains of smear layer from the walls of the canal opening dentinal tubules, which help to better penetration of the sealant.
Code 00000039 Liquid (№1) - 15 ml Code 00000045 Liquid (№2) - 15 ml Code 00000042 Liquid (№3) - 15 mlCode 00000043 Liquid (№4) - 15 mlCode 00005540 Liquid (№2) - 100 ml
Each endodontic liquid is produced separately
29ENDODONTIC DENTAL MATERIALS
GUTTADENTLIQUID FOR SOFTENING GUTTA-PERCHABY FILLING TOOTH ROOT CANALS
FEATURES
PACKAGING
Liquid «Guttadent» is a solution of gutta-percha. Pin softens under the influence of volatile solvent, turning without heat treatment in chemically plasticized gutta-percha, which provides a good marginal fit occlusive material and more precise repetition of the anatomy canal and apical holes.
Code 00003520 Liquid - 10 ml
PURPOSELiquid «Guttadent» is used softening gutta-percha pins by
filling tooth root canals with a complex anatomical structure.
IODENTIODOFORM DOUGH
ANALOGUES «Tempophore» — «Septodont», France«Alveo - Penga» — «Pierre Rolland», France«Jodoformova pasta» — «Spofa Dental», Czech Republic
FOR USE
PURPOSE
FEATURES
PACKAGING
Non-hardening dough is used as treating and prophylactic material in case of acute or chronic periodontitis. It is also used in case of secondary infectioning after filling as well as for provisional filling infected canals when treating pulpitis, granulomatous and granulating periodontitis.
Hardening dough is used for filling in case of pulpitis, acute or chronic periodontites, as well as for filling canals of milk-teeth.
«Iodent» doughs feature long disinfecting and bactericidal effect and contain:�chlorophenol, i.e. antiseptic of phenol range;�camphor, softening phenol effect on organism;�iodoform featuring long bactericidal effect in canal;�dough-adjuster of hydrophobic type;�filler, providing formation of bone osteoblasts in apex area and featuring radiopacity. Structuring of «Iodent» hardening
dough takes place in the canal during 72 hours due to canal moisture.«Iodent» non-hardening dough provides multiple treatment. As the result of this, the application of the dough minimizes any
unpleasant complications and painful reaction after filling. The dough resolves in soft tissues.
Code 00001383 Hardening dough - 25 gCode 00000032 Non-hardening - 25 g
«Iodent» dental iodoform dough is produced as:�non-hardening dough for provisional filling when
treating infected canals;�hardening nonabsorbable dough for permanent filling
tooth canals.
30ENDODONTIC DENTAL MATERIALS
OXIDENTDENTAL MATERIAL BASED ON
CALCIUM HYDROXIDE FOR FILLING TOOTH ROOT CANALS
FEATURES
PACKAGING
«Oxident» is two-component (dough-dough) radiopaque material based on calcium oxide and salicylates. Calcium oxide combines a unique set of properties needed for a successful endodontic filling:
�connects the residual moisture on the walls of the root canal, and carbon dioxide to form hydroxide and calcium carbonate, sealing microtubule;
�allows for the sterility of root canals and reduce their exposure, providing an alkaline environment (pH 12.8);�stimulates reparative regeneration juxtahilar tissues, stimulates the growth of hard tissue at the top of the tooth
endodontically healed, and the growth of hard tissues in the zone of perforations.When mixing equal amounts (by volume and weight) of dough base and catalyst obtained plastic mass to fill the canals.
In the canal of the tooth material hardens within 2 hours (at 37°C and 100% humidity).
Сode 00018849 White dough - 12 g; Yellow doug - 12 g
PURPOSEThe dental material «Oxident» is used for filling tooth root
canals by treatment of pulpitis and apical periodontitis. Used in combination with gutta-percha (one-pin method and all kinds of technology-condensation) or silver pins.
PULPEVITENDODONTIC LIQUIDS FOR TREATING PULPITIS
ANALOGUES «Pulperyl» — «Septodont», France«Rockles №4» — «Septodont», France
FOR USE
FEATURES
PACKAGING
«Pulpevit» liquid № 1 contains lydocaine hydrochloride, chlorophenol, and cresol. Liquid № 1 can be used as a compress for pulp localization when no further treatment can be fulfilled.
«Pulpevit» liquid № 2 contains phenol, eugenol and formaldehyde providing antiseptic effect, deep mummification and sterilization of root canals. The other component of liquid № 2 is dexamethasone (0,05%).
«Pulpevit» liquid № 3 (formocresol) contains formaldehyde (19%) and cresol (35%) providing partial or total mummification of milk tooth root pulp.
Code 00002153 Liquid №1 - 15 mlCode 00002141 Liquid № 2 - 15 ml Code 00002155 Liquid № 3 - 15 ml
PURPOSE«Pulpevit» set of liquids is used for anaesthetization in
cases of pulpitis and periodontitis, «Pulpevit» liquid № 1 is used before applying arsenious
dough«Pulpevit» liquid № 2 is used for root antiseptic treatment«Pulpevit» liquid № 3 is used for treating caries of milk
teeth.
31ENDODONTIC DENTAL MATERIALS
PULPODENTDENTAL ANTISEPTIC MATERIAL FOR FILLING ROOT CANAL MOUTH OF VITAL TEETH
ANALOGUES «Pulpoteс» — «PD», Switzerland
FOR USE
FEATURES
PACKAGING
Dental material «Pulpodent» set comprises powder and liquid.The powder contains:
�polyoxymethylene – i.e. antiseptic providing partial devitalization of pulp;
�iodoform providing long bactericidal effect;�zinc oxide and radiopaque filler.
The liquid contains:�eugenol;
�formaldehyde – i.e. antiseptic featuring microbocidal activity;
�phenolantiseptic featuring bactericidal and mummifying effect and providing pulp sterilization;�dexamethasone (0.13%) featuring anti-inflammatory effect .
The content of mummifying and antiseptic agents provides quick and painless treatment. The dough mummifies the mouth part of pulp only. The apical part of pulp is not mummified, providing formation of root apical part in permanent teeth with non-formed roots. In multi-root canals the material provides antiseptic effect on pulp stump preserving its vitality.
Code 00005709 Powder - 25 g; Liquid - 15 ml
PURPOSE«Pulpodent» dental material is used for:
�treating pulpitis of vital provisional and permanent teeth with non-formed roots;
�treating sharp local and chronic fibrous pulpitis with preservation of a viable root pulp;
�treating infected provisional molars using pulpotomy method;
�treating pulpitis of permanent teeth before making prostheses;
�
endodontic treating).treating pulpitis after pulp vital amputation of displaced teeth and teeth with difficult root canals (purposely of
RESODENT ANTISEPTIC MATERIAL BASEDON RESORCIN-FORMALINE
ANALOGUES «Forfenan» — «Septodont», France«Foredent» — «Spofa Dental», Czech Republic«Resoplast» — «Pierre Rolland», France«Endoform» — «Chema», Poland
FOR USE
PURPOSEDental material is used for filling and antiseptic treatment
of root canals with partial pulp extirpation as well as of difficult canals.
FEATURES
PACKAGING
«Resodent-VladMiVa» dental material contains:�powder based on trioxymethylene and radiopaque filler;�catalyst, based on resorcin and catalyst;�treating liquid based on formaldehyde.
When mixing 2 liquids with powder, the dough is obtained which is plastic during 0,5 hour. Total hardening time is 24 hours. Antiseptic resorcin-formaldehyde resin is the base of the dough.
To provide effective anti-inflammatory and anti-allergic effects produced material «Resodent-VladMiVa» with
dexamethasone, powder which contains the active additive – 0.2% dexamethasone.
Code 00000128 / 00018850 Treating liquid - 5 ml / 25 ml; Catalyst - 5 ml / 25ml; Powder - 10 g / 40 g «Resodent – D»Соde 00018851 Treating liquid - 10 ml; Catalyst - 10 ml; Powder - 20 g
32ENDODONTIC DENTAL MATERIALS
SILDENTFILLING MATERIAL ON SILICON BASIS
ANALOGUES «Silgap» — «Stoma», Ukraine
FOR USE
FEATURES
PACKAGING
«Sildent» dental material is produced as two doughs of white and yellow colour indicating homogeneity when mixing. The standard dough to dough ratio is 1:1. When mixing two doughs, plastic mixture is obtained keeping plasticity on glass plate during 1 hour and hardening during 1-3 hours.
«Sildent» material is based on:�polydimethylsiloxane, i.e. plasticizer;�hydroxyapatite stimulating osteogenesis of bone tissue;�iodoform, i.e. long-acting antiseptic;�radiopaque fillers, stabilizers and fillers containing calcium.
Due to microdispersity of fillers, «Sildent» material can be used for filling with pins.
Code 00001572 White dough - 7 g; Yellow dough - 7 g
PURPOSE«Sildent» dental material is used for filling canals with
complicated configuration of bone at apex.
SOLVADENT
LIQUID AND GEL FOR CLEARING OF ROOT CANALS
ANALOGUES «Resosolv» — «Pierre Rolland», France«Endosolv-R, E» — «Septodont», France
FOR USE
PURPOSE «Solvadent» dental liquid (gel) is used for clearing canals
of zincoxide-eugenol filling materials and resorcin-formaldehyde resins.
FEATURES
PACKAGING
«Solvadent» dental liquid (gel) contains organic solvent with low surface tense, odorant and gel-adjuster.For cleaning roots of upper teeth «Solvadent» gel is recommended. The chemical effect of «Solvadent» liquid/gel and
mechanical action facilitate the procedure of cleaning root canals considerably.
Code 00000119 Liquid - 5 ml Сode 00000118 Gel - 5 ml
33ENDODONTIC DENTAL MATERIALS
TRIOXIDENT
DENTAL WATER CURED MATERIAL
ANALOGUES «ProRoot, МТА» — «Dent Splay», USA
FOR USE
FEATURES
PACKAGING
Main components of «Trioxident» material are calcium, silicon and aluminum oxides. Standard powder to distilled water ratio ois 3:1. Obtained dough keeps its plasticity for 10-15 minutes at temperature 18-23 C and 50±10% humidity due to plasticizer
introduced into powder. The material begins to hard during 4 hours.Total hardening time in root canal is 24 hours.The material comprises copper-calcium hydroxide, i.e. active bacteriostatic additive.Material hardening process comprises 3 stages: first, calcium oxide contacts with water. As a result, calcium hydroxide is
obtained providing high ph level (12,8). Then calcium exudes from solution in amorphous state covering particles of radiopaque filler (bismuth oxide) and uniting all the components into bonded mass. Calcium hydroxide particles compress then calcium silicate obtained increasing mechanical strength of the cement.
Calcium hydroxide stimulates processes of apexigenesis and osteogenesis in case of treating teeth with non-formed roots, it prevents resorption of bone tissue and stimulates dentinal bridge formation in case of pulp covering.
«Trioxident» material features good bactericidal effect, high biocompatibility, low solubility, high mechanical strength. The material provides good sealing of root canals.
By means of set of instruments with various form cannulas and plastic nozzles (applicators) it is possible to dosed easily without special efforts to deliver a material in remote sites of the root canal. Universality of instruments allows dentists to use them at work with other materials for filling of canals or for imposing medical and isolating linings. The paste received at mixing, set into the applicator by several pecking movements. The applicator is placed in the canal on necessary depth and squeeze out a portion of a material pressing on the internal piston.
Code 00008627 Powder - 0,3 g х 10 pcСode 00005128 Powder - 0,5 g х 10 pc
Produced separately and as set with instruments for retrograde filling.
PURPOSE «Trioxident» dental material is used for retrograde filling,
for filling upper apex part of canal, for sealing perforations of root canal, for pulp isolation.
STIODENT
GLASS IONOMER WATER CURED CEMENT
ANALOGUES «Ketak Enolo» — «Espe», Germany«Endion» — «Voco», Germany«Enolo -Jem» — «Jendental», USA
FOR USE
FEATURE
PACKAGING
«Stiodent» dental material features high biocompatibility, good adhesion to dentine, radiopacity, low solubility, high mechanical strength.
«Stiodent» powder is mechanical mixture of fine alumofluoro-silicate glass and polyacrylic acid. «Stiodent» material is easily mixed with water until required consistency is obtained.
Glass-ionomer reaction starts immediately after mixing powder with water and is followed by leakage of fluorine ions strengthening dentine and featuring bactericidal effect.
In a combination with gutta-percha or metal points, «Stiodent» material provides strong and safe filling of root canals. «Stiodent» material can be used without points as well.
If necessary, the canal can be disobturated by combining chemical effect of «Solvadent» material with mechanical action.
Code 00000122 Powder - 10 g
PURPOSE «Stiodent» water-plasticizable radiopaque glass-ionomer
material is used for filling root canals.
34ENDODONTIC DENTAL MATERIALS
TRICREDENT
TIEDENT
АNTISEPTIC ZINCOXIDEEUGENOL MATERIAL
ANALOGUES «Creidodent» «Alfa-Beta»— USA
FOR USE
ANALOGUES «Endomethasone» — «Septodont», France
FOR USE
АNTISEPTIC TWO-COMPONENTRADIOPAQUE MATERIAL
FEATURES
PACKAGING
«Tricredent» dental material is produced as powder/liquid set. «Tricredent» liquid is solution of tricresol-formaldehyde
bakelite resin featuring antiseptic effect. «Tricredent» powder contains radiopaque filler. As the result of powder with liquid mixing, radiopaque dough is obtained which hardens in 48 hours to 2-3 weeks (depending on consistency), which features no shrinkage and minimal coloring effect on tooth hard tissues.
The material causes slight pain if contacting outside apex.
Сode 00001042 Powder - 15 g; Liquid - 10 ml; Solvent - 10 ml
PURPOSE «Tricredent» dental material is used for filling root canals
in case of apical periodontitis and pulpitis.Note!!! Do not use in case of arsenic periodontitis and root
canal bleeding when treating pulpitis using vital extirpation method.
«Tricredent» material is also used when filling canals using guttapercha points.
FEATURES
PACKAGING
«Tiedent» zincoxide-eugenol dental material features high biocompatibility, bactericidal and antiseptic effect. The plastic dough is obtained by mixing powder and liquid. The material keeps its plasticity for 5-7 hours. Hardening time in the canal is 48-72 hours. Long working time provides successful handling and necessary correction. The material features also 0,5% solubility in the canal.
«Tiedent» dental material contains: �zinc oxide;�thymol iodide – i.e. antiseptic; �hydrocortisone acetate (1% content) providing strong anti-inflammatory effect and reducing periapical pain; �dexamethasone (0,01%) containing fluorine and featuring anti-inflammatory and anti-allergic effect; �eugenol; �plasticizer;�radiopaque filler.
When filling with guttapercha points, «Tiedent» material seals side parts of canal and provides points adhesion to each other and to canal walls.
Code 00000123 Powder - 14 g; Liquid - 10 ml
PURPOSE «Tiedent» dental material is used for filling root canals
when treating gangrenous pulpitis and different forms of periodontitis, especially acute one.
The material is also used as sealer when filling canals using guttapercha points.
35ENDODONTIC DENTAL MATERIALS
PHOSPHADENTCALCIUM-PHOSPHATE MATERIAL
PHOSPHADENT-BIOMATERIAL BASED ON OXIDE AND HYDROXIDE CALCIUM
ANALOGUES «Biocalex» — «Spad», France«Biopulp» — «Chema», Poland
FOR USE
ANALOGUES «Biocalex» — «Spad», France«Biopulp» — «Chema», Poland
FOR USE
FEATURES
PACKAGING
«Phosphadent» dental material features low solubility, it forms a plug in the area of apical foramen when the upper part of the canal is carefully filled at a distance of 0.5 to 0.7 mm from the apex.
«Phosphadent» dental material contains:�calcium hydroxide;�calcium phosphates;�calcium fluoride and radiopaque agents.
As a result of chemical reactions taking place when the powder and water are mixed, calcium hydroxiapatite is formed providing linking tissues on the apex level.
Сode 00000130 Powder - 15 g; Liquid - 12 ml
FEATURES
PACKAGING
«Phosphadent-bio» material is produced as powder/liquid set. «Phosphadent-bio» liquid is water solution of plasticizer. «Phosphadent-bio» powder contains calcium oxide and hydroxide and radiopaque filler. Calcium oxide features necessary effect for successful endodontic treatment:
� it binds residual moisture on root canal walls with carbonic acid providing formaton of calcium hydroxide and carbonate hermetizing micro- and macrocanals;� it features water absorbing, expansion in the canal and good hermitization of the canal;� it provides canal sterility and reduces canal inflammation due to long acidic effect (pH 12.8);� it stimulates reparative regeneration of tissues around canal root.
Code 00000132 Powder - 15 g; Liquid - 12 ml
PURPOSEFilling root canals both using the points and without the
latter under all types of permanent filling materials, including the composites.
PURPOSE«Phosphadent-bio» dental material is used for endodontic
treatment of infected canals of provisional and permanent teeth, of teeth with difficult root canals. It is also used as sealer in case of filling canals using pins.
36ENDODONTIC DENTAL MATERIALS
VIEDENTDENTAL MATERIAL
BASED ON EPOXY AMINOPOLYMER
ANALOGUES «AH-26», «АН-Plus» — «Dentsplаy», USA
FOR USE
PURPOSE «Viedent» dental material is used for filling tooth root
canals by treating of pulpitis or apical parodontitis with use of gutta-percha points (one-point method and all types of condensation).
FEATURES
PACKAGING
«Viedent» dental material is 2-component (powder-liquid or dough-dough) radiopaque material on calcium hydroxide and epoxy resin base.
Working time is 1-1,5 hour. Hardening time is 24-72 hours. After setting, the obtained aminopolymer features bioinertness to tooth tissiues and does not affect them toxically. «Viedent»
material features bactericidal effect, high strength characteristics, low shrinkage and solubility. The material hermetizes the canal effectively.
«Viedent» material can be used with silver and titanium points.
Code 00000022 Powder - 20 g; Liquid - 10 ml Сode 00002108 White dough - 4 ml; Yellow dough - 4 ml
CALCIUM CONTAINING TREATING MATERIALS
HEMOSTATIC MATERIALS
ANESTHETIC MATERIALS
MATERIALS FOR GUM TREATING
MECHANO-CHEMICALPREPARATION
OF CARIOUS CAVITIES
CALCETATE
CALCESIL
CALCELIGHT
CALCEVIT
ALUMOSIL
ALUMOGEL
ALVANES
CAPRAMIN
RE-CORD
DESENSILGEL, DOUGH, SPRAY
BELAIOD
BELSOL №3
FTORASEPT
KP-PLAST
PARASEPT
VITADONT
CARICLEANS
TREATING DENTAL MATERIALS
37
PURPOSE«Alvanes» powder is used as a hemostatic when removing calculus, curetting parodontal pockets, leveling alveolar
processes and treating tooth sockets. It is also used in case of gingivactomy and after moulding.
FEATURES«Alvanes» powder is a styptic material. Fine powder is easily sprayed on bleeding mucosa surface. The material comprises:
џ natural polysaccharide, forming gel in contact with blood;џ sodium alginate facilitating quick hemostasis;џ antiseptic (iodoform 0,01%)џ The material is non-toxic and is compatible to antibiotics or antiseptics.
PACKAGINGCode 00000004 Dough - 20 gCode 00000005 Powder - 7 g
TREATING DENTAL MATERIALS
ALVANES HEMOSTATIC MATERIALS
ALVANES powder
ALVANES dough
ALUMOSILDOUGH FOR PROVISIONAL ATRAUMATIC
GUM TROUGHING
ANALOGUES «Expasyl» — «Pierre Rolland», France
FOR USE
«Alstase» — «Septodont», France
ANALOGUES«Alvogyl» — «Septodont», France
PURPOSE «Alvanes» anesthetic, styptic and antiseptic compress is
used as an alveolar compress after dental extraction.
FEATURES«Alvanes» styptic resolving material covers the bleeding surface, and due to swelling after contact with blood, it presses the
hurt capillaries. The pressure and the haemostatic effect of aminocaproic acid provide quick bleeding stoppage. «Alvanes» material contains:
џ lidocaine hydrochloride – i.e. anaesthetic;џ cetrimide – i.e. antiseptic;џ gel-adjuster.
FEATURES Dental material «Alumosil» is a ready to use dough and has astringent and haemostatic properties. Dough «Alumosil»
contains: aluminum chloride, which determines astringent, hemostatic and retraction properties of the material; inert filler, as well as flavoring and processing aids.
Dough, which was introduced in the gingival pocket or sulcus, provides an increase, a retraction of the gums and gingival field drains. After applying the dough is easily removed by the air-water jet.
One cannula of dough is sufficient for retraction of the gums 7-10 teeth.
PACKAGINGСode 00010404 Dough - 1,5 gCode 00010403 Dough - 10х0,3 g
PURPOSEDough «Alumosil» is used for provisional atraumatic gum
troughing and gum dewatering by restoration the cavity of Class II and V, by obtaining accurate impressions and fixation of crowns and bridges, as well as dewatering and disclosure sulcus in periodontal therapy.
38
FOR USE
ALUMOGELHEMOSTATIC GEL
BELSOLSET OF DENTAL LIQUIDS FOR ORAL CAVITY MUCOSA TREATMENT
ANALOGUES «Сalypso» — «Septodont», France
FOR USE
ANALOGUES «Racestyptine» — «Septodont», France
FOR USE
FEATURES «Alumogel» material is produced as two gels: «Alumogel» and «Alumogel»(forte). «Alumogel» gels are applied without
spreading on mucosa. The main component of «Alumogel» materials is aluminum chloride (i.e. hemostatic) which intensifies centimonium bromide
featuring bactericidal effect.For quicker hemostasis, «Alumogel» (forte) contains Fe-salts.«Alumogel» materials are not toxic and can be easily used. The materials do not feature irritation effect and are easily washed
off.«Alumogel» (forte) material on Fe basis can change color of gum tissue for 1-2 days.
PACKAGINGCode 00004651 Gel - 5 mlCode 00004796 Gel forte - 5 ml
PURPOSEDental material is used as a hemostatic in case of capillary
bleeding, for gum retraction when making imprints and treating cervical caries, for prophylaxy purpose and for treating root canals in case of apical bleeding.
FEATURES Liquid-concentrate № 3 is water-based elixir of orange color containing natural antioxidants (b-carotene, vitamins E and C).
PACKAGINGСode 00002190 Liquid - concentrate №3 - 20 ml
PURPOSE«BelSol» set of liquids is used for antiseptic and
prophylactic treatment of oral cavity.«BelSol» set of liquids comprises:џ Liquid-concentrate № 1 used for hygienic and
prophylactic rinsing before visiting dentist or preparing dental impressions (see part «Prophylactic dental materials»);
џ Liquid-concentrate № 1 with fluorine used for fluorination and prevention tooth caries and periodontics (see part «Prophylactic dental materials»);
џ Liquid-concentrate № 2 used for prophylactic rinsing and antiseptic treatment of mucosa in cases of gingivitis and parodontitis (see part «Endodontic dental materials»);
џ Liquid-concentrate № 3 used for rinsing in cases of mucosa inflammation, gingivitis and parodontitis.
39TREATING DENTAL MATERIALS
BELAIODIODINE-CONTAINING ANTISEPTIC DOUGH
ANALOGUES «Iodo glycerin» – Neo chemical dental, Japan
FOR USE
FEATURES«Belaiod» iodine-containing dough features bactericidal effect on candida and albicans. It is also used as antibiotic in case of
parodontitis treatment. Glycerin and lecithin contained in the materia prolong effect of iodine.
PACKAGINGCode 00001326 Dough - 3 g
PURPOSE«Belaiod» dough is used for antiseptic treatment of oral
mucosa (stomatitis, gingivitis, paradontitis) as well as for treatment infected canals.
40TREATING DENTAL MATERIALS
CALCESILCALCIUM CONTAINING PADDING MATERIAL
CALCEVIT dough
ANALOGUES «Dycal» — «Dentsply», USA«Calcimol» — «Voco», Germany«Sterimix», — «Recal», England«Septocal» — «PSP Dental», England
FOR USE
ANALOGUES «Calxyd» — «Spоfa Dental», Czech Republic
FOR USE
FEATURES «Calcesil» material is a two-component (dough-dough) radiopaque calcium-containing chemically cured material.The material features high clinical effect and comprises:
џ calcium hydroxide (50%) providing formation of secondary dentine layer and restoration of traumatic pulp;џ calcium phosphates and fluoride strengthening tooth tissues;џ methylsalicylate featuring antiseptic effect on hard tissues microflora and forming chelate complexes with calcium;џ radiopaque filler, dough-adjuster and fine filler.
PACKAGINGCode 00000035 Basic dough - 5 g; Catalyst dough - 3 g
PURPOSE«Calcesil» dental material is used as a treating pad for
direct and indirect covering of pulp under all types of filling materials. It is also used as treating calcium-containing pad when treating pulpitis (traumatic, chronic, fibrous and acute serous pulpitis), in case of occasional pulp opening, after pulp amputation.
CALCIUM CONTAINING PADDING RADIOPAQUE MATERIAL
PURPOSE«Calcevit» dental material is used as therapeutic pad for
regeneration of traumatic and inflamed pulp in case of pulpitis (traumatic, acute serous, chronic fibrous). It is also used as a pad under permanent fillings when treating deep caries.
FEATURES«Calcevit» dental material is produced as dough or powder to be mixed with distilled water until homogenous dough is
obtained. Calcium hydroxide is the main component of the material featuring high pH level (12.8), long bactericidal effect, radiopacity,
pulp regeneration, secondary dentine formation, capacity to penetrate deeply into dentine canals and to seal them due to dough-adjuster on water base.
PACKAGINGCode 00000034 Dough - 7 g
41 TREATING DENTAL MATERIALS
CALCELIGHT LIGHT-CURED PADDING MATERIAL CONTAINING CALCIUM
CALCETATE
ANALOGUES «Ultra-blend plus» – «Ultradent», USA«Jen-Line» – «JenD LLC» USA
FOR USE
CALCIUM HYDROXIDE SUSPENSION
ANALOGUES «Contrasil» — «Septodont», France
FOR USE
CAPRAMINHEMOSTATIC LIQUID
ANALOGUES «Racestyptine» — «Septodont», France
FOR USE
FEATURES «Calcelight» is a one-component light-cured radiopaque padding material containing calcium hydroxide, polymer linking
(oligocarbonatemathacrylate), radiopaque filler, initiators and inhibitors of photopolymerization. «Calcelight» material prevents pulp from toxic effect of permanent filling. The material features high stability and low solubility,
thermoisolating effect and chemical affinity with polymeric materials providing high adhesion with composites, unlimited manipulation time and short hardening time.
PACKAGINGСode 00000036 / 00018854 Dough - 3,5 g / 1,5 g
FEATURES The main component of «Capramin» material is aluminum chloride (i.e. haemostatic) which intensifies centimonium bromide
featuring bactericidal effect.«Capramin» material is not toxic and can be easily used. The material does not change tooth tissues color and is easily
washed off.
PACKAGINGCode 00000047 Liquid - 30 ml
PURPOSE «Capramin» dental material is used as a haemostatic in
case of capillary bleeding, for treating tooth sockets and after direct casting, for gingiva retraction and removal of dental calculi as well as for treating root canals in case of canal bleeding.
PURPOSE«Calcelight» is used as calcium-containing pad for
covering deep carious cavities (i.e. indirect isolation of pulp) under fillings made of glassionomer and composite materials.
PURPOSE«Calcetate» dental material is used for isolating cavities
before introducing cement pads, permanent fillings, and for treating tooth stumps before cementing crowns and bridge prostheses.
FEATURES «Calcetate» dental material is a suspension of white color
containing:•calcium hydroxide; •film-adjuster (polistirol, natural resins) and
evaporating base;•flouric calcium (i.e. fluorinating component).
PACKAGINGСode 00000037 Suspension - 5 ml; Solvent - 15 ml
After application of suspension, tooth hard tissues are covered with dry film containing particles of calcium hydroxide and fluorine components providing film roughness and improving adhesion of the material applied.
The obtained film adheres tightly to tooth tissues, covering dentine canals and protecting dentine and pulp from detrimental effects of composite materials. This film creates chemical barrier for acids in composites, reducing teeth sensitivity under amalgams and decreasing possibility of secondary caries formation.
42TREATING DENTAL MATERIALS
CARICLEANSSET OF INSTRUMENTS AND MATERIALS
FOR MECHANOCHEMICAL PREPARATION OF CARIOUS CAVITIES
ANALOGUES «Carisolv» — «Medi Team», Sweden
FOR USE
FEATURES«Caricleans» set comprises two gels to be used one after another. Gel № 1 contains complexing agent of hard tissues
dissolving destroyed mineral components of carious dentine. Complexing agent dissolves non-stable calcium phosphates and oxyapatite without damaging sound dentine. Gel № 1 comprises antiseptic – i.e. cetrimide featuring protective effect from bacteria.
Main component of gel № 2 is sodium hypochlorite dissolving uncovered collagen fibers (organic part of dentine). Sodium hypochlorite features protective effect from all bacteria.
Due to softening effect of gels, carious and sound dentine can be easily separated. Carious dentine is easily removed with «Caricleans» instruments of different types. Combined usage of gels with instruments provides effective mechanochemical preparation of carious cavities. Usage of gels in case of carious enamel is not much effective.
PACKAGINGCode 00001894 Gel №1 - 3 g; Gel №2 - 3 g; Liquid «Color - test» - 10 ml; Instruments - 8 pc
Produced in set and separately set of gels and instruments.
PURPOSE«Caricleans» set of instruments and materials is used in
dentistry (including pediatric one) for softening of carious dentine in case of medium caries and root caries without damaging sound dentine.
Set of special instruments is used for removal of softened tissue of carious dentine without using drilling machine.
FTORASEPTDENTAL MATERIAL FOR ANTISEPTIC
MANIPULATION OF PARODONTIUM TISSUES AND PROPHYLACTIC OF CARIES
ANALOGUES «Elmex gelee»— «GABA», Switzerland
FOR USE
FEATURES Gel «FtorAsept» contains:
џ amino-fluoride;џ fluoride of sodium;џ chlorine-hexidine;џ natural betaine;џ natural thickeners.
A part of gel «FtorAsept» amino-fluoride – the most effective carrier of ions of the fluorine, providing optimum concentration of active fluorine on a surface of hard tooth tissues and rendering anti-carious action. Forming on surfaces of a tooth the highly stable blanket preventing loss of calcium, not dissolved in acids and steady against action of a saliva, amino-fluoride reduces permeability of dental enamel. Gel with amino-fluoride influences on the hard tooth tissues more effectively and more quickly, than gels with other sources of fluorine. Possessing superficial activity, amino-fluoride protects hard tooth tissues from formation of a dental deposit.
Chlorine-hexidine – antiseptic, active in insignificant concentration and possessing a wide spectrum of action concerning gram-positive, gram-negative bacteria and fungoid flora. Owing to residual activity, it provides duration of bactericidal effect on the microorganisms forming a dental deposit, promoting the prevention and treatment of gingivitis, reduces an inflammation of gums.
Natural betaine, a part of gel, possesses properties of protection of alive cells, and also easily transports water for their humidifying that is useful for water balance of a mucous membrane of an oral cavity and removal of a symptom of dryness of a mouth.
Gel «FtorAsept» possesses pleasant flavouring properties.Gel «FtorAsept» can be applied in house conditions.
PACKAGINGCode 00007475 Gel - 10 g
PURPOSEGel «FtorAsept» is used for prophylactic of caries,
hyperesthesia and hypoplasia, non-carious damages of enamel, treatment of an inflammation and gingival hemorrhage, and also a mucous oral cavity under mobile dental prosthesis.
43TREATING DENTAL MATERIALS
DESENSIL
ANALOGUES «Xylogel», — «Septodont», France «Xylocontact, creme» — «Pierre Rolland», France«Anaestho Gel» — «Voco», Germany
FOR USE
SET OF MATERIALS FOR REDUCTION OF TEETH AND MUCOSA SENSITIVITY
PURPOSE «Desensil-VladMiVa» anaesthetic gel is used for anaesthetization before injection, for anaesthetization of hypertrophied
gingival small papilla at its removal (deothermocoagulation, excision), for anaesthetization at curettement, at X-raying and casting.
FEATURES «Desensil-VladMiVa» gel contains lydocaine hydrochloride of quick effect featuring no antigenic influence on tissues. The
material also contains centrimide (i.e. antiseptic) and potash alum (i.e. haemostatic). The material has different flavors (mint, orange, forest berry, cherry, strawberry).The mechanism of action of lidocaine is based on inhibition of penetration of sodium in nervous fibers. Lidocaine hydrochloride
is characterized by longer period of action (in 2 times surpasses than novocaine) and the best bearableness.
PACKAGINGCode 00002328 Gel orange - 5 ml Code 00006156 Gel cherry - 60 mlCode 00002327 / 00009559 Gel forest berry - 5 ml / 60ml Code 00002162 /00002163 Gel mint - 5 ml / 60ml
PURPOSE «Desensil-VladMiVa» dough is used:
џ for reduction of teeth hyperesthesia;џ in case of treating high sensitivity of milk front teeth;џ for pain reduction of whitened teeth and polished teeth to be crowned.
FEATURESThe material contains:
џ hydroxyapatite providing enamel remineralization;џ potassium and sodium ions preventing pain;џ strontium ions reducing teeth sensitivity due to their chemical conjunction with dentine tissues and sealing of dentine
canals;џ lecithin;џ eugenol and filling featuring antiseptic effect.
«Desensil-VladMiVa» dough remains on teeth for some hours providing long therapeutic effect on high-sensitive teeth.
PACKAGINGCode 00002164 Dough - 5 ml
PURPOSE«Desensil-VladMiVa» — LIQUID-SPRAY is used for:
•try-in crowns and bridges;•local anesthesia of the mucous membrane before injection;•surface anesthesia during removal: baby teeth, moving teeth, tartar.
FEATURESThe composition of the liquid is: lidocaine hydrochloride, chlorhexidine bigluconate, propylene glycol, purified water,
sweetener, food flavoring. «Desensil-VladMiVa» — liquid spray has a high and rapid anesthetic effect on the work surface, eliminating pain and
discomfort for patients during dental reception.
PACKAGINGCode 00018853 Liquid-spray - 50 ml
« » Desensil-VladMiVa is produced as set and separately.
«Desensil-Vladmiva» set comprises:џ gel for mucosa;
џ dough for reduction of teeth hyperesthesia; џ liquid-spray for anesthesia of oral mucosa;џ set of liquids for reduction of teeth hyperesthesiaџ (see part «Prophylactic dental materials» ).
44TREATING DENTAL MATERIALS
ANALOGUES «Septo-pack» — «Septodont», France
FOR USE
PARASEPTPROTECTIVE COMPRESS FOR GINGIVAE
PARASEPTantiseptic
FEATURES«Parasept» dough contains fibres, it is based on zinc-sulfate cement powder, contains no eugenol and features antibacterial
and anti-inflammatory effect. «Parasept» compress is manipulated with dry spatula only. Working time is 2-3 minutes. Total hardening time is 20-30 min.For provisional filling, the cavity is dried out with warm air flow and then filled. «Parasept» compress protects treating doughs from saliva effect. If necessary, the treating dough is covered with compress.
PACKAGINGCode 00001555 Dough - 70 g
FEATURES«Parasept» self-hardening eugenol-free dough containing fibres is based on zincsulfate powder, it features bactericidal and
anti-inflamma tory effect. Treating effect is provided by metronidasol. «Parasept» antiseptic and antimicrobial dough features effective influence on pathogen flora stopping inflammatory process.
«Parasept» compress should be mixed with dry spatula only. Plasticity time in oral cavity is 2-3 minutes. Total hardening time is 20-30 minutes.
PACKAGINGCode 00002191 Dough - 70 g
PURPOSE«Parasept» material is used as treating compress in case
of sore-necrtotic gingivitis, chronic parodontitis, parodontal abscess, after parodontal surgical treatment. The material is also used for provisional filling.
PURPOSE«Parasept» compress is used for provisional filling, for
pressing back before filling. It is also used as a protective and treating compress when paradontitis. The material is compatible with other treating materials.
ANALOGUES «Septo-pack» — «Septodont», France
FOR USE
45TREATING DENTAL MATERIALS
KP-PLASTSELF-RESOLVING TREATING PLATES
ANALOGUES «Diplen-Denta» — «Nord-Ost», Russia«Plates «CM» — «Salyta-M», Russia
FOR USE
FEATURES «KP-Plast-phyto» self-resolving plates have treating and prophylactic effect in case of gingivitis, parodontitis, gum and
periodontium tissues inflammation and soreness.«KP-Plast-phyto» plates are based on natural polysaccharides; the plates contain plasticizers, chamomile, milfoil and
calendula extracts, antioxidants and vitamin C. 2«KP-Plast-vita» plates are based on natural polysaccharides; the plates contain plasticizers, vitamins E (1.0-1.125mg/cm ),
2 2C (0.35-0.37mg/ cm ) and beta-carotene (0.3-0.32mg/ cm ).«KP-Plast-antimicrobial» self-resolving plates have treating and prophylactic effect in case of gingivitis, parodontitis, gum
and periodontium tissues inflammation and soreness. The plates are based on natural polysaccharides and peptides and contain metronidazole, chlorhexidine, plasticizers and preservative.
PACKAGINGCode 00001552 Plates antimicrobial (5 х 10 cm) - 2 pcCode 00001357 Plates phyto (5 х 10 cm) - 2 pcCode 00001333 Plates vita (5 х 10 cm) - 2 pc
PURPOSE «KP-Plast» self-resolving plates are classified according
to their application:•«KP-Plast-phyto»;•«KP-Plast-vita»;•«KP-Plast-antimicrobial».
RE-CORDDENTAL SET FOR GINGIVAL RETRACTION
ANALOGUES «Racestypine» — «Septodont», France «Retracord» — «PsР Dental», England
FOR USE
FEATURES «Re-Cord» set contains retracting liquid and cords№ 1 - thin№ 2 - medium№ 3 - thickBoth treated (with «Re-Cord» liquid) and untreated cords are produced.«Re-Cord» liquid features therapeutic effect provided by aluminum chloride. Retraction (compression and deallocation) of gums lasts for 30 minutes. Untreated cords should be treated with «Re-Cord» liquid exactly before their usage. The material is recommended for use
before moulding. In this case surface details are exactly reproduced on the imprint. Treated cords prevent bleeding when fixing dentures in the interdental areas.
PACKAGINGCode 00004950 Retracting liquid - 5 ml; Retracting cord (untreated) № 1 - 2 mCode 00004932 Retracting liquid - 5 ml; Retracting cord (untreated) № 2 - 2 mCode 00004856 Retracting liquid - 5 ml; Retracting cord (untreated) № 3 - 2 m
PURPOSEThe cord from the set is used for gingival retraction,
prevention of gingival leakage during preparation of cavity in cervical area.
The liquid from the set is used in case of apical and gingival bleeding as well as for treatment of cords.
Сode 00004798 Retracting liquid -15 ml; Retracting cord (untreated) № 1 + № 2 + № 3 - 2 m eachСode 00001045 Retracting liquid - 5 mlCode 00001046 Retracting cord (treated) № 1 - 2 mlCode 00001047 Retracting cord (treated) № 2 - 2 mlCode 00001048 Retracting cord (treated) № 3 - 2 ml
46TREATING DENTAL MATERIALS
VITADONT DOUGH BASED ON LECITHIN AND VITAMINS
FOR TREATMENT AND PROPHYLAXIS OF GINGIVITIS AND PARODONTITIS
FEATURES «Vitadont» is bactericidal vitaminized dough based on wax-lecithin complex containing beta-carotene, vitamins E and C. The
material features sedative and anaesthetic effect. Complex of natural components and bio-active agents provide softness and elasticity of parodont tissues. Vitamin complex protects oral mucosa from active pro-oxidants (i.e. active forms of oxygen and free radicals). Lecithin provides quick assimilation of vitamins. Treating components of beeswax contained penetrate into gum and reduce pain, disinfect oral cavity due to adsorption of harmful components on wax.
PACKAGING Сode 00000008 Dough - 15 g
PURPOSE«Vitadont» dental dough provides quick wound healing
after surgical treatment (curettage, scrap operation) and is used for stopping gingival bleeding and inflammation.
WHITENING MATERIALS
REMINERALIZING MATERIALS
FISSURE SEALANTS
MATERIALS FOR ORAL HYGIENE
SILVERING OF TOOTH HARD TISSUES
POLISHING DOUGHS
SENSITIVITY REMOVAL
BELAGEL
BELAGEL О(LIGHT,ACTIVE)
BELAGEL Са/Р
GLUFTORED
COLORDENT
FLUORIDIZING MATERIALS
BELAK F
BELAGEL F
GLUFTORED
NANOFLUOR
FISSULIGHT-COLOR
FISSHIM-COLOR
BELSOL №1
COLOR-TEST
ARGENATE ONE/TWO-COMPONENT
AIR-CLEANS
BELAGEL - R
POLIDENT
DESENSIL
PROPHYLACTIC DENTAL MATERIALS
47
AIR-CLEANSSET OF MATERIALS FOR PREPARATION AND
POLISHING TEETH BY SAND-JET TREATMENT METHOD
PROPHYLACTIC DENTAL MATERIALS
ANALOGUES FOR USE«Air-flow handy» — «EMS», Sverarland
«Air-Cleans -PROPH is used for:џ removal of deposit and soft tooth sediments;џ removal of coloring deposit and teeth whitening;џ cleaning fissures before hermetization;џ parodontic inflammation and caries prophylaxis.
«Air-Cleans»-PREP is used for:џ removal of hard tooth deposit;џ treatment of caries cavities;џ preparation of teeth that staggering of surface caries for restoration.
«Air-Cleans» SUSPENSION is used for:џ removal of deposit;џ cleaning of surface of tooth roots;џ polishing tooth.
»
FEATURES
PACKAGING
«Air-Cleans -PROPH is used according to sand-jet treatment method (Air-Flow). At action of water jet and pressed air powder cleans effective hard tissues restoring natural colour and health shine.
Powder based on sodium bicarbonate which size of particles providing careful cleaning of tooth hard tissues. In case of cleaning jet on the gum of lydocaine hydrochloride (0,5%) that contains the powder improves painlessness of soft tissues. The powder has pleasant fresh scent and flavour.
«Air-Cleans»-PREP contains aluminum oxide, anticompressed component and has flavour addition with lemon scent. The grain (less than 50 mkm) and the abrasive hardness provide effective treat of hard deposit and caries tooth tissues.
«Air-Cleans» SUSPENSION contains hydroxyapatite (size of particle 5-7 mkm). By supply of suspension the procedure of cleaning of root in subgingival pocket is passed effectively and painless.
Code 00005115 / 00005294 Powder «Air-Cleans»-PROPH - 20 g / 200 gCode 00007000 / 00007725 Powder «Air-Cleans»-PREP - 40 g / 200 gCode 00008913 Suspension «Air-Cleans» -100 ml
»
PURPOSE«Air-Cleans» is produced of 2 types powders, different for
purpose:«Air-Cleans»-PROPH – for prophylactic treatment;«Air-Cleans»-PREP– for preparation of cavities;and of suspension «Air-Cleans» for removal of deposit (by
method of system VECTOR).Powders «Air-Cleans»-PROPH, «Air-Cleans»-PREP and
«Air-Cleans» suspension are produced as a separate product.
48
BELSOLSET OF DENTAL LIQUIDS FOR ORAL CAVITY MUCOSA TREATMENT
DENTAL LIQUID MATERIAL FOR REDUCTION OF TEETH HYPERESTHESIA, FOR TEETH FLUORINATION AND ROOT CANALS SILVERING
ARGENATE
ANALOGUES «Сalypso» — «Septodont», France
FOR USE
ANALOGUES «Saforide» — «Toyo sayaku К0», Japan«Cariostatic» — «Vatar Proxima», Brazil
FOR USE
PURPOSE«BelSol» set of liquids is used for antiseptic and
prophylactic treatment of oral cavity.«BelSol» set of liquids comprises:џ Liquid-concentrate № 1 used for hygienic and
prophylactic rinsing before visiting dentist or preparing dental impressions;
џ Liquid-concentrate № 1 with fluorine used for fluorination and prevention tooth caries and periodontics;
џ Liquid-concentrate № 2 used for prophylactic rinsing and antiseptic treatment of mucosa in cases of gingivitis and parodontitis (see part «Endodontic dental materials»);
џ Liquid-concentrate № 3 used for rinsing in cases of mucosa inflammation, gingivitis and parodontitis (see part «Treating dental materials»).
PURPOSE«Argenate» one-component is used in case of primary
caries (especially of milk teeth), for reduction of teeth hyperesthesia and root canals silvering as well as for secondary caries prevention after teeth restoration.
«Argenate» set is used for silvering infected and difficult canals, carious milk teeth and teeth with cervical caries. The material should not be used for silvering front teeth because of its coloring effect.
FEATURES
PACKAGING
«Argenate» one-component is a color-less transparent liquid containing complex salt of diaminoargentum fluoride (I).The material effect is based on transformation of calcium and orthophosphate ions of tooth hydroxiapatite into calcium
fluoride and silver. These components coagulate proteins of dentine organic base blocking cavities of tooth hard tissues and strengthening dentine structure.
«Argenate» material features no irritating effect on pulp due to calcium fluoride formed on dentine surface. This layer narrows dentinal canals preventing penetration of silver ions.
The material features long bactericidal effect preventing failure of mineral elements contained in milk teeth.Avoid contact of «Argenate» material with mucosa! For mucosa protection, the tooth should be isolated with cotton wad and
mucosa should be treated with mineral butter or coconut oil. In case of material contact with mucosa, it should be washed off with water.
«Argenate» set for silvering tooth hard tissues comprises:
џ liquid № 1 containing ion form of silver
џ liquid № 2 containing silver restorer
џ liquid petrolatum for mucosa isolation when silvering milk teeth and cervical part of teeth.
Silvering method comprises penetration of silver ions into macro- and microcanals of tooth hard tissues, then silver is restored and deposited in dentine canals.
One-component Code 00001575 Liquid - 5 mlCode 00000001 Liquid № 1 - 4 ml; Liquid № 2 - 3 ml; Liquid petrolatum - 5 ml
FEATURESLiquid-concentrate № 1 contains aluminum chloride
featuring viscous and cleaning effect on oral cavity and featuring bactericidal effect on bacteria in oral cavity.
Liquid-concentrate № 1 with fluorine contains 1,5% sodium fluoride, water, hypoallergic food colors, flavoring and sweetening agents.
From the concentrate by attenuating with distilled water get a neutral solution (pH 7) containing 0,2% sodium fluoride to prevent tooth caries.
PACKAGINGCode 00002189 Liquid-concentrate № 1 - 125 mlCode 00018842 Liquid-concentrate №1F - 125 ml
Сode 00025093 Liquid-concentrate № 1F - 118 mlQuart-measure - 1,14 lPlastic cup (0,2 l) - 50 pc
49PROPHYLACTIC DENTAL MATERIALS
BELAGELSET OF GELS FOR TOOTH WHITENING
AND REMINERALIZING
ANALOGUES «Opalescence» — «Ultradent», USA
FOR USE
BELAGEL-O
ANALOGUES «Opalescence», — «Ultradent», USA«Dental Wite», — «Colgate», USA
FOR USE
GEL FOR TOOTH WHITENING
PURPOSE «Belagel» set is used for treatment of tooth hard tissues.
«Belagel-O» is the unique whitening system.«Belagel-O» gel contains carbamide peroxide, which
concentration allows whitening at home (12%, 20%) and at the dentist's (30%).
The whitening procedure should be followed by remineralizing with «Belagel-Ca/P» to prevent tooth hyperesthesia.
After whitening and remineralization it is necessary to conduct fluorination of teeth by gel «Belagel - F» for strengthening of enamel.
FEATURES
PACKAGING
« »«Belagel-Ca/P» gel is used for treatment of teeth hypersensitivity and its prophylaxis. The gel comprises tooth enamel ions
penetrating into tooth hard tissues and providing their mineralizing.«Belagel-F» gel based on natural polisaccharide features deep penetration of F- ions into tooth tissues providing their
mineralizing, enamel fluorinating and strengthening. «Belagel-Ca/P» and «Belagel-F» gels are used in case of teeth hyperesthesia and enamel injuries.The set contains «Aksil» dough for protection of oral mucosa when using whitening gel.
Code 00000011 Set 12%: «Belagel О» - 1 ml x 4 pc, «Belagel Са/Р» - 1 ml х 2 pc, «Belagel F» - 1 ml х 2 pc, Dough - 5 ml, Compensating varnish -12 ml
Соde 00000012 Set 20%: «Belagel О», - 1 ml х 4 pc; «Belagel Са/Р» - 1 ml х 2 pc, «Belagel F» - 1 ml х 2 pc, Dough - 5 ml, Compensating varnish -12 ml
Belagel-O gel is used for removal of teeth discoloration and for pulpless teeth whitening.
FEATURES
PACKAGING
«Belagel-O» is universal whitening gel system with carbamide peroxide as the most modern and sparing whitening agent. Peroxide is the source of atomic oxygen, under action of which there is breaking up of organic matters painting tooth tissues. Active oxygen removes bacteria cooperant to forming of unpleasant smell. A whitening gel contains 30% water, consequently, there is no drying and dehydration of hard tissues. Teeth do not lose brilliance. The ions of potassium incoming in the complement of «Belagel-O» prevent appearance of sensitiveness of teeth.
Depending on concentration of carbamide peroxide preparation can be used both in domestic terms under the supervision of dentist (12%, 20%) and in the conditions of clinical reception (30%).
It is recommended to combine domestic (at home) whitening with clinical. At filling and restoration of teeth it is recommended preliminary to conduct whitening of dental row with the purpose of correct
choice of tint of restoration material.
Code 00000017 / 00000016 / 00000015 Gel 30 %, 20 % or 12 % - 5 ml
Сode 00000013 Set 30% : «Belagel О» - 5 ml х1 pc; «Belagel Са/Р» - 5 ml х 1 pc; «Belagel F» - 5 ml х 1 pc Dough - 5 ml х 1 pc
PURPOSE«Belagel-O» gel is used for removal of tooth discoloration
and for pulpless tooth whitening.
50PROPHYLACTIC DENTAL MATERIALS
CLINIC SYSTEM OF TOOTH WHITENING
CLINIC SYSTEM TOOTH WHITENING
BELAGEL-O-active(20% / 30% hydrogen peroxide)
BELAGEL-O-light
ANALOGUES «Opalescence Xtra Boost» — «Ultradent», USA
FOR USE
ANALOGUES «Brite Smile Professional Teeth Whitenning»,—«Brite Smile», USA«Zoom» — «Discus Dental», USA
FOR USE
FEATURES
PACKAGING
Before whitening it is recommended to make prevent oral patient.oBy using the gel which stores in the refrigerator it needs to stay at room temperature (23 C) during one hour.
To protect the soft tissues of oral with cofferdam. With a brush gel is applied to the teeth layer 1-2 mm thick and evenly distributed. After applying the gel to set the lamp «Zoom» into position so that the light was focused on the teeth. The lamp should be
located approximately 3-4 cm from the surface of the upper central incisors. It is recommended that 3 cycles of whitening for 20 minutes.
After completing the third cycle, unplug the lamp and remove the whitening gel to the tooth surface. After removing the cofferdam rinse the mouth.
After the whitening procedure it is recommended to tooth remineralization and fluoridation.
Сode 00008915 Gel - 1,5 g
FEATURES
PACKAGING
The structure of the whitening system «Belagel-O» (active) comprises: gel based on 20% (or 30%) hydrogen peroxide and gel containing alkaline activator. By mixing two gels, hydrogen peroxide breaks down to form active radicals, which occurs under the influence of the splitting of organic substances, that color the tooth tissue. The blue color of the gel facilitates the control of the bleaching process.
Using of system «Belagel-O» (active) provides improved color of teeth by 6-8 shades on the scale of VITA. Gel, like any other material for whitening do not lighten restoration materials.
Code 00008916 Set 20 %: Gel based on hydrogen peroxide - 1,5 g; Gel-activator - 1,5 g.Code 00009306 Set 30 %: Gel based on hydrogen peroxide - 1,5 g; Gel-activator - 1,5 g.
PURPOSESystem «Belagel-O -(light) absorbs a certain spectrum of
light, which activates the whitening gel. System «Belagel-O»-(light) provides the color betterment
of the teeth by 6-8 shades on the scale of VITA. Gel is most effective in removing the yellow and brown
stains on teeth that have not previously been subjected to whitening and can be used for whitening of all types of stains. Gel, as well as any other whitening materials, does not brighten restorative materials.
»
PURPOSEWhitening System «Belagel-O» (active) is used for
removal discoloration as originally available on the teeth, and appeared with age, and for whitening pulpless teeth, including incoronal whitening.
51PROPHYLACTIC DENTAL MATERIALS
REMINERALIZING GEL
BELAGEL-Ca/P
ANALOGUES «Remodent», — Russia
FOR USE
PURPOSE«Belagel Ca/P» remineralizing gel is used for prophylaxis
of dental caries at its initial stage (white spot); for remineralization of enamel when non-caries lesions appear during formation of teeth; in cases of hard tissues hyperesthesia, enamel hypoplasia, hard tissues erosion, etc.
FEATURES
PACKAGING
«Belagel Ca/P» components are ions contained in dental enamel which penetrate into enamel and dentine of affected teeth providing their mineralization.
1 g of «Belagel Ca/P» gel contains 11 mg calcium ions, 5 mg phosphorus, 32 mg chlorine, 1.8 mg potassium ions, 0.9 mg magnesium ions, 20 mg sodium ions.
Сode 00001149 / 00013021 Gel - 5 ml / 10 g
ANALOGUES «Dentrol Ultra»,— «Septodont», France
FOR USE
SOFTENING GEL
BELAGEL-R
PURPOSE«Belagel-R» dental material is used for revealing and
softening dental calculi at its removal from movable teeth in case of parodontitis.
FEATURES
PACKAGING
«Belagel-R» gel contains acid which dissolves salts causing deposit formation. «Belagel-R» provides less hard tissues and mucosa injuries when removing dental deposit.
Ethereal oils freshen the oral cavity. Deposit coloring in blue helps the dentist to control the process.
Сode 00000385 Gel - 5 ml
52PROPHYLACTIC DENTAL MATERIALS
FLUORINATING GEL
BELAGEL-F
ANALOGUES «Fluoridin Gel №5» — «Voco», Germany«Fluorex gel» — «Chema», Poland
FOR USE
PURPOSE«Belagel-F is used as therapeutic material in case of
teeth hyperesthesia or hypoplasia and traumatic damages of enamel (or other non-carious lesions of teeth).
It is also used in pediatric dentistry for caries prophylaxis.
»
FEATURES
PACKAGING
«Belagel-F» gel is based on natural polisaccharide and prevents teeth from caries. It features high penetration of fluorine ions (F-) into tooth tissues providing mineralization of hard tissues and reproduction of tooth enamel.
Code 00000014 Gel - 5 ml
ONE-COMPONENT FLUORINATING VARNISH
BELAK-F
ANALOGUES «Ftorlak» — «Stoma», Ukraine
FOR USE
FEATURES
PACKAGING
«Belak-F» is one-component fluorinating varnish of white color. It comprises solvent, film-adjuster and fluoric potassium. Fluorine ions strengthen tooth enamel, lower its penetrability and prevent teeth from caries.
Code 00000010 Varnish - 25 ml
PURPOSE«Belak-F» varnish is used for caries prophylaxis in
pediatric dentistry as well as for treatment of teeth hyperesthesia, enamel defects and other non-carious lesions.
53PROPHYLACTIC DENTAL MATERIALS
VARNISH DENTAL REMINERALIZING DECORATIVE FOR COLORING TOOTH HARD TISSUES
COLORDENT
PURPOSEVarnish «ColorDent» is used for coloring of enamel in
white with glossy or pearly luster, as well as for decorative coloring of teeth in different colors (yellow, blue, black, etc.).
FEATURES
PACKAGING
Varnish «ColorDent» includes: natural film-former, capable of forming a thin solid film, which has antiseptic and antibacterial properties; solvent; thickener; shading pastes based on titanium dioxide and / or pigments of different color, as well as remineralizing additive (hydroxyapatite), promoted to the restoration of mineral structure tooth.
Varnish «ColorDent» is safe by using, does not damage the oral mucosa, can be easily removed with a toothbrush.
Code 00018709 White enamel tint №1 - 6 mlCode 00018710 White enamel tint №2 - 6 mlCode 00022842 Lilac - 6 ml Code 00022844 Pink - 6 mlСode 00022838 Emerald sparks - 6 mlCode 00022845 Yellow - 6 mlCode 00022839 Silver sparks - 6 mlCode 00022846 Red - 6 mlCode 00022840 Golden sparks - 6 mlCode 00022847 Blue - 6 mlCode 00022848 Green - 6 mlCode 00022841 Black - 6 ml
Code 00018780 Set 12 colors - 6 ml x12 pc
Produced as set or separately.
54PROPHYLACTIC DENTAL MATERIALS
COLORDENT-LCLIGHT-CURED MATERIAL FOR DECORATIVE
COLORING TOOTH HARD TISSUES
PURPOSEMaterial «ColorDent-LC» is used for decorative coloring
of teeth in different colors.
FEATURES«ColorDent-LC» is light-cured one-component composite
material of low viscosity, abrasion-resistant, contents fluorinating components which provide carious-protect effect.
Material «ColorDent-LC»is produced as dough (white,
PACKAGINGСode 00018844 Dough (transparent, white, yellow, orange, , ,
Etching gel for enamel and dentine on organic basis - 3 ml.
Material is produced as set and separately.
Set 7 colors: red green blue) - 1 ml х 7 рс;
«COLOR-TEST № 1» is used for revealing inflammatory processes in soft tissues of oral cavity (Schiller-Pisarev's test).
This test evaluates degree of periodontium inflammation and its treatment effect. The test is used for determination of under-gingival tooth deposit and of inflammation area to be treated in case of gingivactomy and parodontal sockets curettage.
The properties of the liquid which contains iodine, potassium iodide and base are determined by the capability of glycogen (which quantity is increasing in case of inflammation) to
PURPOSE
FEATURES
SET OF COLOR DENTAL INDICATORS
COLOR-TEST
ANALOGUES «Caries Detektor» — «Kuraray», Japan«Caries Marker» — «Voco», Germany«Caries Indicator» — «Uktradent», USA
FOR USE
transparent and colored (5 colors) with wink effect). Food colors correspond to norms of international standards and do not wash from curing material.
give coloration in the process of interaction with iodine-containing solutions. When applying the liquid to soft tissues of the oral cavity, inflamed areas are colored.
«COLOR-TEST №2» — .
«Color-test № 2» is used:џ for revealing softened enamel and dentine in case of caries;џ for control of complete removal of carious dentine;џ for detect of cracks in seals.
«Color-test № 2»contains basic fuchsine which adsorbs on damaged protein of tooth hard tissues and gives red-violet coloration to softened enamel and dentine. Healthy tooth - enamel and mineralized dentine at the same time will not be painted. Thus, the dentist can determine the level of surgical intervention.
«COLOR-TEST №3» — for revealing soft and hard deposit and for evaluation of oral cavity hygiene.
The material contains methylene blue which gives blue color to bacterial dental deposit without coloring tooth hard tissues and mucosa.
«Color-test № 3» is used:For control of removal dental plague and dental tartar and for control of oral cavity.
«COLOR-TEST №4» — for determining sclerosed canals and canal mouth of complicated morphology (see part «Endodontic
dental materials»)
Сode 00000049 / 00000051 / 00000052 Liquid №1, №2, №3 - 20 ml
for revealing softened enamel and dentine in case of caries
PURPOSE
FEATURES
PURPOSE
FEATURES
PACKAGING
55PROPHYLACTIC DENTAL MATERIALS
SET OF MATERIALS FOR REDUCTION OF TEETH AND MUCOSA SENSITIVITY
DESENSIL
ANALOGUES «Xylogel», — «Septodont», France «Xylocontact, creme» — «Pierre Rolland»,France
FOR USE
«Desensil-Vladmiva» set comprises:џ set of liquids for reduction of teeth hyperesthesia;џ gel for mucosa (see part «Treating dental materials»);
џ dough for reduction of teeth hyperesthesia џ (see part «Treating dental materials»);
џ liquid-spray for anesthesia of oral mucosaџ (see part «Treating dental materials»).
PURPOSE
FEATURES
PACKAGING
«Desensil-VladMiVa» set of liquids is used for reduction of dentine sensitivity. It is also used as a pad when treating deep cavities and in cases of enamel erosion.
Dental liquids «Desensil-VladMiVa» (№ 1 and № 2) by cooperative using are simple and effect material for reduction tooth sensitivity.
Liquid № 1 is a solution containing ions of potassium phosphate and carbonate. Liquid № 2 is a solution containing calcium and strontium salts.When treated consequently with both liquids, dentine canals and dentine itself are covered with microcrystal layer of insoluble
salts (3 mkm thick): calcium and strontium phosphates and carbonates. «Desensil-VladMiVa» liquids feature no irritation to tissues, no coloring and no allergic effect.
Code 00002112 Liquid № 1 - 15 ml; Liquid № 2 - 15 ml
DENTAL SET FOR DEEP FLUORINATION OF ENAMEL AND DENTINE (ENAMEL-DENTINE HERMETIC LIQUID)
GLUFTORED
ANALOGUES « » — «Humanchemie», Germany
FOR USEEnamel-dentine hermetic liquid
FEATURES
PACKAGING
«Gluftored» dental set consists of liquid and suspension.«Gluftored» liquid is a blue solution containing magnesium and copper ions.«Gluftored» suspension contains distilled water solution of calcium hydroxide with stabilizer. Sequential treatment with liquid and suspension provides formation of submicroscopic crystals of calcium fluoride in pores of
affected enamel or dentine canals. These crystals are constant source of fluoride ions providing long remineralization of hard tissues. Copper compounds provide effective protection from germs.
Deep fluoridation results formation of CaF microcrystals (less than 1 micron). These microcrystals come upon enamel 2
fissures and dentine canals resulting effective sealing, fluoridation and remineralization.
Code 00001726 Liquid - 10 ml; Suspension - 10 ml
PURPOSE«Gluftored» dental set is used for enamel and dentine
fluorination in case of:·prophylaxy and treatment of the primary and
secondary caries;·fissures sealing providing deep mineralization;·reduction of dentine hypersensitivity.
56PROPHYLACTIC DENTAL MATERIALS
NANOFLUOR VARNISH DENTAL FLUORIDIZING BASE ON NATURAL
RESINS AND NANODISPERSIBLE HYDROXYAPPATITE
ANALOGUES «Bifluorid 12» — «Voco», Germany
FOR USE
PURPOSEVarnish «Nanofluor» is used for deep fluorination and rapid
remineralization dentine and enamel:at a prophylaxis and treatment of primary and second caries, caries in the stage of spot, caries of root, and also at treatment of wedge-shaped defects;after removal of dental deposits at the professional hygienical cleaning of teeth;after delete of the bracket-systems and polish of enamel of teeth and filling;
џ
џ
џ
FEATURES
PACKAGING
Varnish «Nanofluor» contains:�amino-fluoride and fluoride of sodium, increasing resistance of dental enamel to influence of acids, that warns
development of caries. Aminofluoride is the organic compound of fluorine of new generation, possessing the promoted fluoridize activity with the protracted therapeutic action. Optimum maintenance of fluoridize components provides the instantaneous isolation of teeth from the different sort of irritants.
�natural resin possessing antiseptic and bactericidal properties, able to form thin durable tape not influencing on adhesion of restorations materials to the dentine;
�nanodispersible colloid hydroxyappatite, promotional to renewal of mineral structure of enamel of tooth, remineralization dentine of deep carious cavity and normalization of the functional state of pulp of tooth;
�chlorinebutanol, rendering moderately distracting, antiphlogistic and antiseptic action; �basis promotional to the rapid drying out and formation of tape during a 40-60 sec.�Solvent «Nanofluor» is intended for dilution of varnish, in the case of increase of his viscidity, as a result of
evaporation of solvent. For the receipt of coverage more durable and of long duration, and also in the conditions of domestic application, it is
recommended to use the solvent «Nanofluor» for cleaning of surface of tooth before causing of varnish.
Сode 00007472 Varnish - 5 ml; Solvent - 5 ml
џ
џ
џ
џ
џ
џ
џ
after curettage of parodotal pockets for protection of cervical part of tooth at cervical hyperesthesia; at treatment of hyperesthesia of teeth after application of technique of etching (restoration by composite materials, sealing of fissures, setting of bracket-systems).at abrasive damage of enamel and dentine as a result of the wrong cleaning of teeth or at injuring of teeth;at treatment of contact surfaces of neighbouring teeth with unremovable orthopedic constructions;at treatment of «living» stump of the prepared tooth before fixing of unremovable prosthetic appliance;at treatment and prophylaxis of caries at children and teenagers: saving of temporal teeth to appearance of permanent, sealing of fissures in the stage of their ripening, at the pigmented deep fissures second teeth.;before filling for the isolation of deep cavities of tooth.
57PROPHYLACTIC DENTAL MATERIALS
POLIDENTSET OF POLISHING DOUGHS
ANALOGUES «Clean Polish», «Super Polish» — «Hawe neos», Sweden
FOR USE
PURPOSE«Polident №1» — for softening and removing dental
calculi without damaging enamel. It is also used for treatment of tooth discolouring and is recommended for smokers and those suffering from lithiasis.
«Polident №2» — for removing soft dental deposit and treating enamel before teeth restoration, fissures hermitizing, teeth whitening as well as for caries prophylaxis.
«Polident №3» — for enamel whitening, remineralizing and fluorodizing.
FEATURES
PACKAGING
«Polident» doughs feature polishing effect, they fluorinate (fluorine doughs) and protect tooth enamel odouring oral cavity. «Polident» doughs contain fine-dyspersated abrasive, calcium salts, antiseptic, fluorine and flavouring substances, dough-adjuster and filler.
The dough «Polident №1» features chemical and mechanical effect on tooth hard deposit. It contains acidic agent softening hard calculi, abrasive agent removing deposit from teeth and antiseptic agent preventing secondary deposit.
The fluorine-free dough «Polident №2» contains abrasive agent cleaning enamel and fissures without damaging them. «Polident № 2» dough contains dough-adjuster providing dough plasticity and easy application. The material can be easily removed from teeth surface with water.
The dough «Polident №3» contains carbamide peroxide whitening tooth tissues, abrasive agent removing soft deposit, fluorides and phosphorus derivatives remineralizing and protecting tooth enamel.
Сode 00000093Сode 00000094Code 00000096 Dough № 3 - 5 ml Сode 00000108 Set: Dough № 1, 2, 3 - 40 g
Produced as set (in jars) and separately (in syringes).
Dough № 1 - 5 ml Dough № 2 - 5 ml
x 3 pc
FISSHIM-COLORHERMETIC FOR FISSURES CHEMICALLY CURED
ANALOGUES «Fissil» — «Stomadent», Russia
FOR USE
PURPOSE«Fisshim-color» hermetic is used for exogenous
prophylaxis of occlusion caries of provisional and permanent teeth. It is used for sealing fissures and isolation of tooth parts which are susceptible to caries.
FEATURES
PACKAGING
« » ( - , НЕМА)fine quartz filler. «Fisshim-color» hermetic comprises catalytic dough and basic dough. The composite also contains fluorine components protecting teeth from caries.
Fisshim-color chemically-cured hermetic is a composite based on organic bonding agent Bis GMA and silanized
Сode 00022950 Set: Basic dough: yellow, green, blue, red - 3 ml x 4 pc; Cat alytic dough - 3 ml х 4 pc; Etching gel for enamel - 5 ml
Produced as set or separately.
58PROPHYLACTIC DENTAL MATERIALS
FISSULIGHT-COLOR SEALANT FOR FISSURES LIGHT CURED
ANALOGUES «Twinky Star»— «Voco», Germany
FOR USE
PURPOSEUsed for sealing fissures and sockets in intact teeth.
FEATURES«Fissulight» - color hermetic is light-cured 1-component
material of low viscosity. It features high mechanical strength and long anticaries effect due to fluorinating components contained.
«Fissulight» - color light-cured hermetic is produced as dough (white, transparent and coloured with the glimmered effect). Transparent dough is recommended for use in case of primary carious lesions as it provides easy control of enamel state
under hermetic transparent layer. Coloured hermetics are easily applied and controlled during sealing. A bright colour palette (6 colors) will help to conquer the trust of little patient, giving him possibility to participate in the process of treatment at the choice of color of hermetic. Food dyes incoming in the complement of hermetic correspond to the norms of international standards and is not washed from curing material.
Light-cured hermetic can be easily and exactly applied to fissure by means of syringe.
Code 00008917 Set: Hermetic transparentl, white, gold, orange, red, green, blue - 1 ml x 7 pc; Etching gel for enamel and dentine on organic basis - 3 ml
Code 00010044 hermetic transparent - 1 mlCode 00008918 hermetic white - 1 mlCode 00010040 hermetic green - 1 mlCode 00010401 hermetic gold - 1 mlCode 00010042 hermetic red - 1 mlCode 00010043 hermetic orange - 1 mlCode 00010045 hermetic blue - 1 ml
Produced as set and separately.
PACKAGING
ETCHING GELS
POLISHING MATERIALS
ADHESIVES
LIQUID FOR DEFATING
AND DEHYDRATING TOOTH HARD TISSUES
MATERIALS FOR FILLING PROTECTION
GEL
ON ORGANIC BASE FOR ENAMEL AND DENTINE ETCHING
GEL FOR DENTINE ETCHING
GEL FOR ENAMEL ETCHING
POLIDENT №4
BELABOND
CHEMICALLY CURED
BELABOND LIGHT CURED
ANHYDRIN
AKSILAKSIL- LC
ATTENDANT DENTAL MATERIALS
59
AKSILPROTECTION DENTAL DOUGH
AKSIL-LCPROTECTION LIGHT CURED VARNISH
ANALOGUES FOR USE«Hydrosil» — «Stoma», Ukraine
ANALOGUES «Fuji COAT LC» — «GC», Japan
FOR USE
ANHYDRINLIQUID FOR DEFATING AND
DEHYDRATING TOOTH HARD TISSUES
ANALOGUES «Hidrol» — «Septodont», France
FOR USE
ATTENDANT DENTAL MATERIALS
FEATURES
PACKAGING
«Aksil» protective dough contains a hydrophobic biocompatible component, it features repellent effect and does not irritate mucosa.
Code 00000002 Dough - 5 g
FEATURES
PACKAGING
The protecting varnish «Aksil-LC» contains:џ oligoethermethacrylates; џ solvent;џ initiators and stabilizers.
«Aksil-LC» has good adhesion to filling materials, quickly cures by light curing unit and forms thin film which protects glass-ionomer and composite from moisture during curing (at least 24 hours).
Code 00000003 Liquid - 5 ml
PURPOSEџ
during 1,5-2 hours;џ gingiva protection when enamel whitening.
Covering fillings and their protection from saliva
PURPOSE·For isolating the fillings made of glass-ionomer and
composite materials from moisture effect;·for curing small defects and surface porosity.
FEATURES
PACKAGING
«Anhydrin» liquid contains biocompatible agent which seals and protects dentine canals due to formation of thin monomolecular barrier. When treated with Anhydrin liquid, tooth stump sensitivity and painfulness are minimal. The liquid contains no diethyl ether and ethanol, it features no harmful effect on soft tissues and no pain when contacting mucosa. The liquid is easily used and demands no air flow.
«Anhydrin» liquid is widely used in dentistry (including pediatric one).The liquid degreases and dehydrates tooth and prosthesis surfaces before fixation providing good adhesion of cement.
Code 00000006 / 00025850 Liquid - 20 ml / 100 ml
« »
PURPOSE «Anhydrin» liquid is used for defating and dehydrating
tooth hard tissues before filling or fixing prostheses. It is also used for cleaning prosthesis surface before fixing.
60
FEATURES
PACKAGING
PACKAGING
PACKAGING
«Belabond» light-cured adhesive system contains of two components: primer and adhesive.The water based primer moistens all surface of dentine and easy penetrates into dentine canals.The adhesive which contains oligoephiremethacrylate polymers build strong chemical bond with primer and composite.The adhesive system provides strong coupling and safe bordering based on chemical adhesion by restoration of anatomical
tooth form.The adhesive system «Belabond»can be used in combination with light-cured composite materials.
TWO-COMPONENT LIGHT CURED ADHESIVE SYSTEM «Belabond»
Code 00013231 Primer - 5 ml; Adhesive - 5 ml;Gel for enamel etching - 5 ml
ONE-COMPONENT LIGHT CURED ADHESIVE «Belabond»
Code 00013232 Adhesive - 5 ml
SELF ETCHING LIGHT CURED ADHESIVE «Belabond» — adhesive does not require pre-acid etching the surface of the tooth. With good wetting properties, the self-etching adhesive easily penetrates the surface «greased» dentine layer, partially dissolving it. Thanks to the simultaneous process of conditioning and diffusion, infiltration of monomers exactly corresponds to the depth of mineralization.
Code 00013233 Adhesive - 5 ml
BELABONDADHESIVE SYSTEMS
ANALOGUES «Prompt L-Pop» — «Espe», Germany
FOR USE
LIGHT CURED ADHESIVES
АNALOGUES «One step» — «Bisco», USA
FOR USE
АNALOGUES «Prompt L-Pop-3M» — «Espe», Germany
FOR USE
CHEMICALLY CURED ADHESIVE
АNALOGUES «Latebond SC» — «Stoma», Ukraine«Thrabond» — «Stoma», Ukraine
FOR USE
PURPOSEIs used for ensure the lasting connection (adhesion) light
cured composite materials with hard tooth tissues.
FEATURES
PACKAGING
Аdhesive «Belabond» consists of two liquids (catalytic and basic) and contains methacrylate oligomers, polymerization activators, stabilizers.
The material features high chemical compatibility with polymer materials and tooth tissues providing good edge bonding when restoring anatomical shape of tooth.
Сode 00001729 Adhesive (liquid № 1) - 5 ml; Adhesive (liquid № 2) - 5 ml;Gel for enamel etching - 5 ml
PURPOSEIs used for ensure the lasting connection (adhesion)
chemically cured composite materials with hard tooth tissues.
61 ATTENDANT DENTAL MATERIALS
GEL FOR ENAMEL AND DENTINE ETCHING
ON ORGANIC BASE
UNIVERSAL GEL FOR ETCHING
АNALOGUES «All-Etch» — «Bisco», USA
FOR USE
SET OF GELSFOR ETCHING TOOTH HARD TISSUES
АNALOGUES «Etch-Rite», «Etch-All» — «Pulpdent», USA«Acid Etch Gel» — «PSP Dental», England
FOR USE
POLIDENT №4POLISHING DOUGH
АNALOGUES «Hawe super polish» — «Hawe neos», Switzerland
FOR USE
FEATURES
PACKAGING
The gel for enamel etching is based on 37% phosphoric acid, it contains gel-adjuster and dyes. In 30-40 sec. after application, gel for enamel etching facilitates micro-roughness formation providing good adhesion of filling materials to tooth hard tissues. Gel for dentine etching is based on 5% maleic acid, it contains gel-adjuster and dyes. When treating dentine, the smeared layer is removed providing dentine canals opening and higher adhesion of filling material to dentine.
Etching gels can be easily washed off with water.
Code 00000023 Gel for enamel etching - 2 ml; Gel for dentine etching - 2 ml
Each gel can be separately packed in 5 ml and 20 ml syringes.
FEATURES
PACKAGING
The gel on organic base for etching tooth hard tissues is based on 32% orthophosphoric acid, it contains antibacterial agent (benzalconiumchloride) and dye. The gel base comprises organic water-soluble gel-adjuster.
The gel, thickened with organic polymer, features optimal consistency, necessary flowability. The gel can be easily washed with water.
The material provides higher adhesion of filling material to tooth tissues. The contained bactericidal agent reduces tooth sensitivity and features bactericidal effect.In 15-30 sec. the etched enamel becomes rough. That provides material bonding to tooth tissues. When treating dentine, the smeared layer is removed providing better adhesion of the material to dentine.
Code 00010854 / 00025861 Gel - 3 ml / 10 ml
PURPOSEThe gel on organic base is used for etching dentine and
enamel before filling carious cavities.
The set of gels consists of:·gel for enamel etching ·gel for dentine etching
The set of gels is used for etching dentine and enamel before filling carious cavities.
PURPOSE
PURPOSE Is used for final treatment of composite, glass-ionomer and
amalgam fillings.
FEATURES
PACKAGING
«Polident № 4» polishing dough contains abrasive material, dough-adjuster and filler.Fillings should be polished with flame-shaped heads and cups using «Polident № 4» dough.
Сode 00000098 Dough - 6 g
62ATTENDANT DENTAL MATERIALS
SURGICAL
OSTEOPLASTIC MATERIALS
MATERIALS FOR RESTORATIONBONE TISSUE
BIOPLAST-DENT
КLIPDENT
63
SURGICAL MATERIALS
BIOPLAST-DENT
FEATURES
PACKAGING
«Bioplast-Dent» - highly purified, bioplastic material with preservation of the natural structure on the basis xenocollagen and 3bone hydroxyapatite containing sulfated glycosaminoglycans within the biological norm (at least 800 mkg/cm ).
The material is not immunogenic, osteoconductive and osteoinductive, has high biocompatibility and biointegration with patient bone tissue.
Parodontal gel «Bioplast-Dent» contents chondroitin sulfate (sulfated glycosaminoglycans - sGAG), promotes healing of inflamed periodontal due to the synergistic action aimed at reducing the activity of proteolytic enzymes and hyaluronidase bacterial flora. Normalizing the metabolism in the epithelial cells and gum fibroblasts chondroitin sulfate rapidly reduces swelling and gum bleeding, promotes the localization of inflammation, preventing the spread of the surrounding tissues. Chondroitin sulfate significantly improves the condition of dentin and odontoblast exchange.
BIOPLAST-DENT non-demineralised3Сode 00023908 Bits 200-700 mkm - 0,5 cm3Code 00023990 Bits 700-1000 mkm - 0,5 cm3Code 00023956 Chips 1000-5000 mkm - 0,5 cm3Code 00023990 Bits 200-700 mkm - 1,0 cm3Code 00023991 Bits 700-1000 mkm - 1,0 cm3Code 00023955 Chips 1000-5000 mkm - 1,0 cm3Code 00023992 Bits 200-700 mkm - 1,5 cm3Code 00023994 Bits 700-1000 mkm - 1,5 cm3Code 00023970 Chips 1000-5000 mkm - 1,5 cm3Code 00023959 / 00024004 Blocks 5х5х5 mm / 5х5х10 mm - 0,5 cm3Code 00024002 / 00023963 Blocks 5х5х5 mm / 5х5х10 mm - 1,0 cm3Code 00024003 Blocks 5х10х30 mm - 1,5 cm
BIOPLAST-DENT demineralised3Code 00023960 Blocks 5х5х5 mm - 0,5 cm3Code 00023961 Blocks 5х5х10 mm - 1,0 cm3Сode 00023962 Blocks 5х10х30 mm - 1,5 cm
BIOPLAST-DENT with lincomycin3 3 3Code 00023957/ 00023967/ 00023968 Bits - 0,5 cm / 1,0 cm / 1,5 cm
BIOPLAST-DENT with chlorhexidine and metronidazole3 3 3Code 00023958 / 00023965 / 00023966 Bits - 0,5 cm / 1,0 cm / 1,5 cm
BIOPLAST-DENTCode 00023971/ 00023972 Gel - 3 ml / 10 ml
BIOPLAST-DENT membraneCode 00023973 15 x 25 mmCode 00023974 25 x 25 mmCode 00024005 30 x 40 mm
BIOPLASTIC MATERIAL BASED ON BONE COLLAGEN
PURPOSEIs used for fill bone defects in dentistry, oral and maxillofacial surgery:
·Filling of parodontal defects; · Filling of defects after cystectomy, resection of the root; · Filling holes removed teeth, to prevent atrophy of the contour of the alveolar ridge;· Filling the cavities with sinus-lifting;· Reconstruction of alveolar bone;· Closure of maxillary sinus perforations and perforation of the mandibular canal; ·as well as in trauma, orthopedic, ophthalmic surgery and other medical fields.
Parodontal gel «Bioplast-Dent» is used for relieve swelling and inflammation of the tissues of the oral cavity in the practice of surgical dentistry, trauma, fractures, splinting of the jaws, as well as for prevention and treatment of parodontitis, gingivitis and stomatitis.
Application of gel «Bioplast-Dent» after surgical operations improves overall metabolism in tissues due to normalization of vascular microcirculation.
·Bits
·Chips
·Blocks (non-demineralised/demineralised)
·Gel
64
АNALOGUES «Bio-Oss» — «Geitstlich», Switzerland
FOR USE
АНАЛОГИ ПО ПРИМЕНЕНИЮ«Root Replica» — «DS Dental», Швейцария
Material «Кlipdent» is produced:
· in the hyaluronic matrix («Klipdent-GL») ;
·in the collagen matrix («Klipdent-KL»);
·in the polylactide-glycolide matrix («Klipdent-PL»).
PURPOSE
FEATURES
PACKAGING
Is used for:·Filling of defects remaining in jaw after tooth extraction;· Restoration of hard tissue defects after surgical interventions;· Filling of periodontal defects;· Closure of furcations;· Filling of the defect after removal of the cyst.
Dental material «Klipdent»on grain composition is divided into fractions:·Small fraction – 100-500 mkm · Middle fraction – 500-1000 mkm · Large fraction – 1000-2000 mkm.
The choice of grain size depends on the size of the defect. Then larger the defect, so the larger the grain size should be used. Materials «Klipdent-GL» based on hyaluronic acid and «Klipdent-КL» based on collagen have a stimulating effect on cell
growth and contribute to the activation of reparative osteogenesis in the areas of trauma, accelerating the process of differentiation of newly formed bone tissue, which is expressed primarily in the sharp rise in the proportion of regenerate bone components, as well as a more intense maturation of bone substance.
Material «Klipdent-PL» is produced as set with a co-solvent or membrane. When mixing the granules with a co-solvent material becomes pliable and easy to make in place of the defect. After contact with blood or oral fluid material is compacted, pack the defect, facilitating the procedure of suturing the wound. Material is completely resorbed in the range of 9 to 15 months. Resorption takes place in parallel with the regeneration.
MATERIAL BASED ON RESORBING b- TRICALCIUM PHOSPHATE
КLIPDENT
65
АNALOGUES «Root Replica» — «DS Dental», Switzerland
FOR USE
КLIPDENT- GL3 3 3Code 00023975 / 00023977 / 00023979 Granules 100 –500 mkm - 0,5 cm / 1,0 cm / 1,5 cm3 3 3Code 00023976 / 00023978 / 00023980 Granules 500 –1000 mkm - 0,5 cm / 1,0 cm / 1,5 cm3 3 3Code 00024006 / 00026050 / 00026056 Granules 1000 –2000 mkm - 0,5 cm / 1,0 cm / 1,5 cm
КLIPDENT- PL3 3 3Code 00025497 / 00026054 /00026060 Granules 100 –500 mkm - 0,5 cm / 1,0 cm / 1,5 cm3 3 3Code 00026048 / 00026055 /00026061 Granules 500 –1000 mkm - 0,5 cm / 1,0 cm / 1,5 cm3 3 3Code 00026049 / 00023981 / 00026062 Granules 1000 –2000 mkm - 0,5 cm / 1,0 cm / 1,5 cm
КLIPDENT- КL3 3 3Code 00024007 / 00026051 / 00026057 Granules 100 –500 mkm - 0,5 cm / 1,0 cm / 1,5 cm3 3 3Code 00026047 / 00026052 / 00026058 Granules 500 –1000 mkm - 0,5 cm / 1,0 cm / 1,5 cm3 3 3Code 00023996 / 00026053 / 00026059 Granules 1000 –2000 mkm - 0,5 cm / 1,0 cm / 1,5 cm
КLIPDENT- PL + S3Code 00026063 Granules 500 –1000 mkm / Solvent - 0,5 cm / 1,0 ml3Code 00023982 Granules 1000 – 2000 mkm / Solvent - 0,5 cm / 1,0 ml
КLIPDENT- PL + M3 3Code 00026064 Granules 1000 – 2000 mkm / Membrane - 0,5 cm / 1,0 cm ml
КLIPDENT membraneCode 00026065 15х25ммCode 00026066 25х25ммCode 00026067 30х40мм
КLIPDENT GelCode 00026068 1 ml
«Bioplast-Dent» and «Кlipdent» are sterilised with dose g–radiation in the blister pack. Materials are passed the microbial control of sterility.
SURGICAL MATERIALS
PURPOSEIs used for treatment post-extraction wells and for
disinfection of upper jaw sinuses.
FEATURES
PACKAGING
As a basis of iodoform bandage tampon bandage made from 100% cotton with woven edges is used. 100 g bandage contains 5 g of iodoform.
Iodoform bandage has a mild anesthetic, antiseptic, and an effective adsorption. Interact with wound exudate, iodoform allocates free iodine, which provides a pronounced bactericidal effect.
Bandage (sterile flask)Code 00026014 2,5 m х 10 mm Code 00026016 2,5 m х 20 mmCode 00026013 5,0 m х 10 mmCode 00026015 5,0 m х 20 mm
IODOFORM BANDAGE
66SURGICAL MATERIALS
IMPRESSION MATERIALS
LIQUIDS FORPROCESSING OF
PRODUCTS AND INSTRUMENTS
MATERIALS FORFIXATION
MATERIALS FORREPAIR AND
PRODUCTION OFORTHOPEDIC
CONSTRUCTIONS
BELOPRINT
BELOPRINT-CHROMATIC
BELAST
MASSTER
PRINT-TIME
ORTHOSOL
ARMOSPLINT
CEMION-F
COMPOFIX
ОRTHOFIX-АQUA
PECTAFIX
TEMPOFIX
CERAMGEL
TEMPOCOR
ORTHOPEDIC DENTAL MATERIALS
67
ORTHOPEDIC DENTAL MATERIALS
ARMOSPLINTDENTAL SET FOR FIXATION OF
MOVABLE TEETH
АNALOGUES FOR USE«Fiberkor» — «Polidentia», Switzerland«J-Fiber» — «Jen Dental», USA«GlassDent» — «Oкsomat», Ukraine«GlasSpan» — «GlasSpan», USA
FEATURES
PACKAGING
«Armosplint» set comprises glass-fibre, liquid for fibre wetting, liquid composite and adhesive system. «Armosplint» glass fibre features good flexibility and bonding to uneven tooth surface, high compatibility to any liquid
composite material, ability to be polished when not covered with composite, water-proof structure, transparency and hypoallergenicity. The fibre can be stored and handled as usual. It is measured by means of explorer or soft foil and is easily cut with scissors. The fibre should be moistened with special liquid providing good bonding of glass-fibre and composite.
«Armosplint» liquid composite is light-cured dough of low viscosity (A2 shade according to VITA scale). The dough is based on polymer bonding agent and modified fine filler. The composite features good flowability providing its even application to cavity walls. The composite is compatible to all light-cured composites and compomers and can be used in combination with above mentioned materials. The composite should be applied after tooth treatment with adhesive.
«Armosplint» adhesive system comprises primer and adhesive providing good bonding of composite and tooth tissues. Primer moistens dentine surface penetrating into dentine canals due to polifunctional hydrophilic oligomers. Adhesive contains hydrophilic molecules, polymerizing resins providing chemical bond with composite.
The advantages of «Armosplint» set usage are:·quick and easy technique;·sparing preparation of tooth hard tissues;·aesthetic view of construction (natural tooth tissue color) due to glass-fibre transparency;·formation of stable adhesive construction due to micromechanical retention and chemical adhesion of fibre to
composite material;·restoration and preparation of the construction at one procedure.
Code 00005414 Glass fibre: Strip (125,0 х 2,0 х 0,25 mm) - 1 pc; Strip (125,0 x 3,0 x 0,25 mm) -1 pc; Cord (65,0 х 1,5 mm) - 1 pc; Liquid for wetting - 5,0 ml; Primer - 5,0 ml;Adhesive - 5,0 ml; Liquid composite - 2,0 g; Etching gel on organic base -1,0 m.
Сode 00005771 Cord (65,0 х 1,5 mm) - 1 pcCode 00005769 Strip (125,0 х 2,0 х 0,25 mm) - 1 pcCode 00005770 Strip (125,0 x 3,0 x 0,25 mm) - 1 pc
Glass fibre «Armosplint» and liquid composite are produced separately.
· Оver- and in-crown fixation of movable teeth;· tooth retention to consolidate orthodontic treatment;· tooth fixation in case of dislocation;· correction of teeth row defects;· preparation of adhesive prostheses and fixing dentures
(laboratory method)· restoration of tooth crown part.
PURPOSE
68
BELASTIMPRESSION SILICONE MATERIAL CONDENSING TYPE
АNALOGUES «Zetaplus Soft» — «Zhermack», Germany«Speedex» — «Coltene whaledent», Switzerland«Stomaflex» — «Spofa Dental», Czech Republic
FOR USE
«Belast» of MEDIUM VISCOSITY (type 2) is used for obtaining moulds in cases of parodontitis, defects of jaw bone, when obtaining prostheses and endodontic appliances in pediatric dentistry.
«Belast CATALYST» is used for setting impression silicone materials of condensing type («Belast» of high/medium/low viscosity).
«Belast» of high viscosity (ISO 4823, type 0 - hard, type 1 - soft) is a silicone impression composition of cold vulcanization. The material features optimal primary consistency, high stability after setting, high impression quality and elasticity, low
setting. Mixing time should not exceed 30-40 sec. Working time is 1 min 30 sec. Hardening time is 3,0 min. Vulcanization time of «Belast» material depends on catalyst quantity.
«Belast» of low viscosity (ISO 4823, type 3) is a silicone impression composition of cold vulcanization. Mixing time should not exceed 30-40 sec. Working time is 1 min 30 sec. Hardening time is 3,0-4,0 min. linear shrinkage is 0,65%. Vulcanization time of «Belast» material depends on catalyst quantity.
«Belast» of medium viscosity (ISO 4823, type 2) with catalyst is a dough based on silicone rubber of cold vulcanization and catalyst.
The material features primary fluidity, good stability after setting, high impression quality and elasticity, low setting. Mixing time should not exceed 30-40 sec. Working time is 1 min. 30 sec. - 2 min. Hardening time is 4-5 min.
«Belast-catalyst» material is catalyst-gel for impression silicone materials of condensing type when making exact impressions of hard and soft tissues area. As a result of mixing silicone materials («Belast» of high/medium/low viscosity) with «Belast-catalyst», elastic vulcanizate is obtained.
Catalyst should be dosed according to manufacturer's direction for use of the basic material.
Code 00004800 /00025862 «Belast» of HIGH VISCOSITY (type 0-hard) Dough - 600 g / 1,5 kgCode 00010405 /00025863 «Belast» of HIGH VISCOSITY (type 1-soft) Dough - 600 g / 1,5 kgCode 00004801 «Belast» of LOW VISCOSITY Dough - 100 gCode 00004802 CATALYST universal Gel - 80 g
Code 00004799 Set:«Belast» of MEDIUM VISCOSITY Dough - 130 g; CATALYST Gel - 7,0 g
Produced as set and separately.
FEATURES
PACKAGING
PURPOSE
«Belast» of HIGH VISCOSITY (type 0 - hard and type 1 - soft) is used for obtaining primary basic imprints according to 1 and 2-layer methods.
«Belast» of LOW VISCOSITY (type 3) is used for obtaining secondary imprints according to 2-layer method. It is also used for obtaining imprints of tooth-less jaw.
69ORTHOPEDIC DENTAL MATERIALS
АNALOGUES «Ypeen» — «Spofa Dental», Czech Republic«Orthoprint» — «Zhermark», Italy
FOR USE
ALGINATE IMPRESSION MATERIAL
BELOPRINT
BELOPRINT-chromaticALGINATE IMPRESSION MATERIAL
WITH INDICATION OF WORKING PHASES
АNALOGUES «Elasti Cromo»— «Spof Dental», Czech Republic«Phose Plus» — «Zhermark», Italy
FOR USE
АNALOGUES «Personal Krono»— «Lascod», Italy
FOR USE
PRINT - TIMELIQUID FOR INCREASING WORKING TIME OF
ALGINATE IMPRESSION MATERIALS SERIES “BELOPRINT”
PURPOSEIs used for making impressions in prosthesis and
orthodontics.
FEATURES
PACKAGING
«Beloprint-Chromatic» is powder with short wetting time. The material comprises sodium alginate, calcium sulfate, filler and indicator. Introduction of the indicator in a composition allows visually control separate stages of structuring of a material that facilitates work of the dentist and allows reduce to a minimum the time of quotation of impression material in an oral cavity of the patient.
«Beloprint-Chromatic» - three-phase impression material: · violet phase - time of mixing;·pink phase - time of processing;·light-pink - white phase - introduction in an oral cavity of the patient.
Code 00007474 Powder - 450 gCode 00025865 Mono-dose - 27 g
PURPOSEIs used for increasing working time of alginate impression
materials series «Beloprint»: «Beloprint» and «Beloprint-Chromatic».
FEATURES
PACKAGING
Liquid «PRINT-TIME» contains a component which slows down the beginning of structuring alginate material, while its physical properties - strength, elasticity, remain unchanged.«PRINT-TIME» does not affect the minimum residence time of material in the oral cavity.
Liquid «PRINT-TIME» is used in cases where it is necessary to extend the working time of alginate impression material, for example, in the summer, when working with children.
«PRINT-TIME» has no taste and flavour, biologically compatible and does not cause allergic reactions in patients.
Code 00018843 Liquid - 30 ml
FEATURES
PACKAGING
«Beloprint» is powder with short wetting time. The material comprises sodium alginate, calcium sulfate, filler and indicator.Impressions made of «Beloprint» material reproduce hard and soft tissues exactly. The material features high elasticity and
break strength, good compatibility with plaster providing smooth surface of gypsum model.
Code 00004805 / 00004871 Powder - 450 / 800 gCode 00025864 Mono-dose - 27 g
PURPOSE«Beloprint» is material on sodium alginate base, used for
making impressions.
70ORTHOPEDIC DENTAL MATERIALS
FEATURES
PACKAGING
Cement «Compofix» behaves to composite materials of double mechanism of curing (chemical and light) and is produced as two doughs (basic and catalytic). Cement «Compofix» consists of: methakrylate oligomers; inorganic dispersed stuffs; activators of chemical and light cured; stabilizers.
As a result of mixing of equal amounts of doughs the composite cement of cured during short time with formation of hard material possessing: by adhesion to hard tissues of tooth and surfaces of different orthopedic constructions; by optimum hardness and durability at the compression; by low solubility and erosive firmness; by fluorine isolation.
·working time - 2 - 2,5 min·hardening time by t=37ºС - 4 min·hardening time by photopolymerization - 40 sec·film thickness - less than 25 mkm·bending strength - 85 MPa
Code 00004870 Basic dough - 3,5 g; Catalytic dough - 3,5 g; Primer - 5,0 ml; Adhesive - 5,0 ml; Silane - 5,0 ml;Gel for enamel etching - 5,0 ml
CERAMGELDENTAL SET FOR REPAIR AND TREATING CERMET AND CERAMIC PRODUCTS AND PROSTHESES
COMPOFIXDENTAL COMPOSITE CEMENT FOR FIXATION OF DENTURES AND INPUTS MADE OF METAL ALLOYS, CERAMICS AND COMPOSITES
АNALOGUES «Nexus2» — «KerrHawe», Switzerland«Calibra» — «Dentsplay», USA«Twinlook Cement» — «Heraens Kulzer», Germany«PinaviaF» — «Kuraray», Japan
FOR USE
АNALOGUES «HF-Gel» — «Jeneric Pentron Inc», USA«Ultradent Porcelain Etch&silane» — «Ultradent», USA«EtchArrest» — «Ultradent», USA
FOR USE
PURPOSE AND FEATURES«Ceramgel» dental set consists of two gels, primer-
adhesive and opaker.Gel № 1 is used for etching porcelain when repairing or
fixing ceramics. Gel № 2 is used for protecting hard and soft tissues of oral
cavity from etching effect of gel № 1 of other etching gels.Primer-adhesive is used for bonding composite with
ceramics and metal when restoring ceramic and cermet dentures.Opaker is used for the masking metal surface and for the
imitation natural color of teeth.«Ceramgel» gel № 1 is based on hydrofluoric acid (HF)
used for etching ceramics and glass.«Ceramgel» gel № 2 is based on sodium bicarbonate solution neutralizing acidic effect.Primer-adhesive contains oligoehtermethacrylates, solvent, photoinhibitors and stabilizers. Primer-adhesive forms a thin
and stable adhesive layer and facilitates further restoration with any light cured composites.The base of opaker is organic poli-functional binding consists of inorganic oxides and pigments.
Code 00001544 Gel № 1 - 5 ml; Gel № 2 - 5 mlСode 00025866 Gel № 1 - 5 ml; Gel № 2 - 5 ml; Opaker - 3 gCode 00002136 Gel № 1 - 5 ml; Gel № 2 - 5 ml; Opaker - 3 g; Primer-adhesive - 5 ml Gel №1 and №2 are produced as set.
PACKAGING
PURPOSE «Compofix» dental cement is used for fixation of metal and
cermet crowns and bridge dentures, stump inputs made of metal alloys, ceramics and composites, viniers made of ceramics, porcelain and composites.
71ORTHOPEDIC DENTAL MATERIALS
72ORTHOPEDIC DENTAL MATERIALS
GLASS IONOMER CEMENT CHEMICALLY CURED
CEMION- F
АNALOGUES «Ceramcem» — «PSP Dental»«Fugi Orto» — «GC», Japan«Meron» — «VOCO», Germany«Ortocem B» — «GC», Japan
FOR USE
PURPOSEIs used for fixing crowns and bridge prostheses, fixing
inserts and points.
FEATURES
PACKAGING
«Cemion F» cement is obtained by mixing powder and liquid. The powder is fine alumofluorosilicate glass. The liquid is water solution of polyacrylic acid.
«Cemion F»cement features radiopacity, high mechanical strength, low solubility, good adhesion to enamel, dentine and other dental materials. The material provides good hermetization of tooth edges and long fluorine release strengthening tooth hard tissues and preventing formation of secondary caries.
The material causes no pain when fixing crowns and bridge prostheses.Compression strength in 24 hours 85±4 MPaАdhesion to enamel after treating with conditioner 6,8±1,0 MPаАdhesion to dentine after treating with conditioner 4,5±1,0 MPаAcid erosion 0,04 mm/hFilm thickness 22±2 mkm
Сode 00001240 Powder - 20 g; Liquid- 15 ml; Conditioner - 10 ml
DENTAL MATERIAL FOR CARE AND FIXATION OF REMOVABLE PROSTHESES
PECTAFIX
АNALOGUES «Protefix» — «Queisser Pharma», Germany,«Calcident» — «Spofa Dental», Czech Republic
FOR USE
Gel for gum « » is purified extract of the seeds of corn, vitamins A and E, essential oils. Natural plant components gel create the affected plot gums or mucosal protective film, which is held on the wet surface. This prevents the penetration into the wound surface of pathogenic microorganisms, that considerably accelerates the healing of the affected area. It effectively removes the swelling and inflammation, provides fast analgesic effect, improves microcirculation in the tissues of parodentium, does not violate the natural composition of microflora of an oral cavity, is easily transported with long-term use.
The gel does not contain ethanol and lidocaine. POWDER A dental product for fixation of removable prostheses in the case of mucosa hypersensitivity.A thin layer of «Pectafix» powder should be applied to the clean surface of a prosthesis preliminarily wetted with water.When
setting a prosthesis, press it firmly against a gum. The fixation time is 3 to 5 hours.The powder contains sodium alginate and pectin – i.e. natural polisaccharides featuring good adhesion to mucosa and
providing painless fixation of prostheses.CREAM Cream «Pectafix» is intended for fixation of removable dentures for a period of 8-12 hours. When applied to the denture
cream acts as a shim, providing a soothing effect on the painful areas of the mucous membrane.Specially selected adhesive components included in the composition of the cream «Pectafix» preserve the integrity of
composition in the long sorption moisture, so the cream «Pectafix» possesses the following properties: ·provides a tight and secure fit to the gum;·firmly fix the prosthesis during the whole day;·protects the space under the prostheses from entering the food particles in the time of its reception;·prevents rubbed sore and inflammation of the gums;·easily removed from prosthesis.
PLATES The plates on the basis of natural modified polysaccharides are used for fixation of removable prostheses.The pad of the necessary size is put into water for 10 sec and is applied then to clean wetted prosthesis. The prosthesis should be placed on gingiva and pressed.
Code 00000090 Gel - 60 gCode 00000091 Powder - 40 gCode 00013293 Cream - 10 gCode 00001378 / 00001328 Plates for upper and low jaws each - 30 pc
Pectafix
PACKAGING
PURPOSE, FEATURES
PARODONTAL GEL for gum «Pectafix» is intended for treatment of inflammatory processes and damage to the mucous membrane of the oral cavity, including those arising in the process of addiction and wearing removable dentures.
73ORTHOPEDIC DENTAL MATERIALS
ОRTHOFIX-АQUADENTAL CEMENTS FOR ORTHOPEDY
АNALOGUES Оrthofix P «Adhesor Carbofine» — «Spofa Dental», Czech Republic «Carboxylat Cement» — «Espe» Germany,Оrthofix S «Fuji Ionomer» — «GC», Japan «Ketak-cem» — «Espe», Germany
FOR USE
PURPOSETo improve the quality of orthopedic treatment of patients
when using removal dentures, to increase the time of enjoying the crowns and bridge prostheses, a system of «ORTHOFIX-AQUA» dental cements has been developed including:
џ glass-ionomeric water-plasticizable cement (S);џ polycarboxylate water-plasticizable cement (P); џ calciferous water-plasticizable cement for a provisional
fixation (K).
«Orthofix-Aqua» glassionomer cement is used for permanent fixation of crowns, inlays, pins and dental bridges; fixation of orthopedic and orthodontic dentures.
«Orthofix-Aqua» GLASS IONOMER cement is a mechanical mixture of alumofluorosilicate glass and dry polyacryl acid. Powder is easily mixed with water until necessary consistency is obtained. Glassionomer reaction starts immediately after mixing.
The material features good adhesion to enamel and dentine, low solubility, high mechanical strength; it prevents secondary caries due to fluorine ions leakage.
«Orthofix-Aqua» POLYCARBOXYLATE cement is a mechanical mixture of modified zinc oxide and dry polyacrylic acid.«Orthofix-Aqua» polycarboxylate cement features good adhesion to dentine, enamel and dental materials, it also features
low solubility and shrinkage, high stability. «Orthofix-Aqua» polycarboxylate cement is easily mixed with water until necessary consistency is obtained. The material
causes no pain when fixing crowns and bridge dentures.
«Orthofix-Aqua» CALCIUM CONTAINING cement is obtained by mixing calcium-containing powder with distilled water. The material for provisional fixation facilitates easier usage of new orthodontic dentures in oral cavity. The material features
aesthetic effect in case of provisional fixation of crowns.Adhesion features facilitate painless removal of provisional crowns.
Code 00000088 Orthofix S: Powder - 30 gCode 00000089 Orthofix P: Powder - 30 gCode 00000087 Orthofix C: Powder - 30 g
FEATURES
PACKAGING
MASSTERIMPRESSION THERMOPLASTIC MASS
АNALOGUES «Stens-03» — «Stoma», Ukraine
FOR USE
PURPOSE «Masster» impression thermoplastic mass is used in
dentistry for moulding when making inputs and crowns as well as for making removable prostheses.
FEATURES
PACKAGING
«Masster» impression thermoplastic mass is a multicomponent system, containing thermoplastic agents modified with resin and fillers for providing necessary features. The softening temperature is 50-60°C, at that temperature the mass gets necessary plasticity. At the temperature of 37-39°C the moulding mass is hardening and are making accurate and solid impressions.
Code 00000072 Plates - 200 g
FEATURES
PACKAGING
«Orthosol-Cleans» liquid (concentrate) is used for clearing dental instruments of alginate and gypsum impression
materials. The liquid comprises a component forming water-soluble elements with calcium ions and other bivalent ions. These formations provide high quality of cleaning.
Code 00003524 / 00025870 Liquid -125 ml / 500 ml
FEATURES
PACKAGING
«Orthosol-Dent» liquid is used for clearing removable dentures of bacterial deposit and different materials, as well as for storing prostheses.
«Orthosol-Dent» liquid contains:·centimonium bromide;·salt of sorbic acid;·flavoring agent.
Code 00004660 /00025871 Liquid - 125 ml / 500 ml
Liquids «Orthosol» are produced as set and separately.
74ORTHOPEDIC DENTAL MATERIALS
АNALOGUES «Trayfix» — «VOCO», Germany«Reto Haftlack» — «Kettenbach», Germany
FOR USE
FEATURES
PACKAGING
«Orthosol-Adhesive» retention points on the impression
spoons to improve adhesion of impression silicone materials.The silicone impression mass are possessing of small
adhesion to impression spoons.«Orthosol-Adhesive» is a liquid that contains:
·methacrylic soresin – filmformer, that possessed good adhesion to all surfaces and lasting long stickness;
· rapidly on the air evaporation filler.
Code 00002651 / 00025869 Liquid - 125 ml / 500 ml
SET OF LIQUIDS FOR PROCESSING DENTAL IMPRESSIONS
ОRTHOSOL
АNALOGUES «MD-520» — «DURR Dental», Germany«Dimenol» — «Septodont», France
FOR USE
«Algina spray» — «Pierre Rolland», France
FEATURES
PACKAGING
FEATURES
PACKAGING
«Orthosol-Dez» liquid is used for disinfection of impressions made of silicone and alginate materials. «Orthosol-Dez»liquid provides good disinfection of dental imprints without damaging thei surfaces and changing their sizes. «Orthosol-Dez» is an antiseptic liquid containing dimethylcarbinol featuring bactericidal effect on viruses, glutaric aldehyde
featuring antiseptic effect, odorant, dyes and filler.
Code 00025867 / 00026010 Liquid-spray - 500 ml; Liquid - 1 l;
«Orthosol-Impres» keeps the quality of impressions made of alginate materials that to give an opportunity to keep making gypsum impression to 72 hours and allow to cast gypsum model and duplicate using one alginate impression.
«Orthosol-Impres» liquid contains rapidly on the air evaporation filler.By the storage impressions made of alginate materials it is value exchanges in consequence of loss water and process
sineresice.
Code 00026073 / 00025868 Liquid - 500 ml / 1l
PURPOSE«Orthosol» set of liquids contains:«Orthosol-Dez»used for disinfection of impressions
made of silicone and alginate materials«Orthosol-Impres» used for keeping quality of
impressions made of alginate materials«Orthosol-Adhesive» used for making retention points
on impression spoons«Orthosol-Cleans» used for clearing dental instruments
of alginate and gypsum materials«Orthosol-Dent» used for cleaning and storing
removable dentures.
DENTAL MATERIAL FOR TEMPORARY FIXATION OF FIXED ORTHOPEDIC CONSTRUCTIONS
TEMPOFIX
АNALOGUES «No mix»— «Cetrix», USA«Temp Bond NE»— «Kerr», Italy
FOR USE
PURPOSEThe dental material «Tempofix» is used for temporary
fixing time crowns, used for the period of manufacturing and at a stage of crownwork and prosthetic bridges, and also for temporary fixing constant fixed constructions for adaptation in an oral cavity.
The dental material «Tempofix» is applied as a temporary filling material to the covering of medical products, a temporary isolating lining material at treatment of deep caries, and also at delayed or many-stage treatment of a periodontitis.
FEATURES
PACKAGING
Dental material is issued in the form of ready-to-use white , under the action of moisture. is a multi-component composition, containing salts of calcium, zinc oxide, dough-former, modified polymer and a plasticizer.
OIn the oral cavity (at a temperature of 37 C) the material is cured within 6-8 minutes. Before application it is not necessary to dry up and the crown, as the material is cured in the presence of moisture.
After curing material has sufficient strength for a long time fixation. When removing the crowns of the hard tissues of tooth stump are not injured. The procedure is painless.
Material «Tempofix» can be used by the patient in the home, as there is no need special preparation of the tooth stump and the crown in the process of fixing.
The dental material «Tempofix eugenol-free» is the two-component eugenol-free material (dough-dough). The basic dough contains zinc oxide, paste-forming component and modifying additives, catalytic dough – natural resins, organic acids and the activator. At mixing doughs the plastic mass is formed which it is possible to put easily a thin layer on an internal surface crown (or to bring in a cavity of a tooth). After curing cement is formed of the sufficient strength allowing without special efforts to remove surpluses of a material and if necessary it is easy to take off crown and to remove the rests of a material from tooth stump, not injuring the patient.
Application of the dental material «Tempofix eugenol-free» does not influence quality of the subsequent fixing or restoration with use of composite materials.
Especially it is recommended to application the material for patients with allergic reactions on eugenol.
The dental material «Tempofix eugenol» is the two-component material (dough-dough). The basic (white) dough contains zinc oxide, paste-forming component and modifying additives, catalytic (brown) dough – eugenol, paste-forming component and the activator. At mixing doughs the plastic mass is formed which it is possible to put easily a thin layer on an internal surface crown (or to bring in a cavity of a tooth). After curing cement is formed of the sufficient strength allowing without special efforts to remove surpluses of a material and if necessary it is easy to take off crown and to remove the rests of a material from tooth stump, not injuring the patient.
Using of dental material «Tempofix eugenol» does not influence on the quality of the next fixation with using of composite materials if you keep the following recommendation: Before fixing crowns on a constant material (glass ionomer cements«Cemion-F», «Orthofix-S», composite material «Compofix», VladMiVa) it is necessary to process a tooth stump with material for drying and degreasing of tooth hard tissues («Anhydrin», VladMiVa).
Сode 00025872 / 00007473 Dough - 0,5 g х 10 / 5 gCode 00010185 Basic dough - 40 g; Catalytic dough - 14 gCode 00018704 Basic (white) dough - 20 g; Catalytic (brown) dough - 7 g
«Tempofix» dough curing Dough
75 ORTHOPEDIC DENTAL MATERIALS
« :·Dough moisture curing (ready to use);·Eugenol-free (basic dough/catalytic dough);·Eugenol (basic dough/catalytic dough).
Tempofix» is produced in 3 forms
FEATURES
PACKAGING
«Tempocor» is polymer composite material based on multifunctional methacrylates and produced as 2 doughs (basic and catalytic) different colors according to scale VITA (A2, A3, A3.5, B2, C2). As a result by mixing of equal amounts of doughs is composite cement which cured for a short time with the formation of a durable material.
The material is simple to use:0:00–0:45 min — filling impression with material «Теmpocor» and accommodation in the cavity of the mouth;0:45–3:00 min — curing and removal from the cavity of the mouth;7:00–9:00 min — fully cured and the final treatment.
·Is indicated for long-term temporary prosthesis.·5 colors according to scale VITA (A2, A3, A3.5, B2, C2).·High fractural strength.·Excellent performance, high color stability.·Resistant to abrasion.·Exact marginal seal.·Does not emit monomers and does not overheat teeth.·Form construction can easily be adjusted fluid composite.
Code 00025914 Basic dough A2 - 3,5 g х 2 pc; Basic dough A3 - 3,5 g х 2 pc; Basic dough В2 - 3,5 g х 2 pc; Catalytic dough - 3,5 g х 6 pc
Сode 00024320 Basic dough A2 - 3,5 g х 2 pcCode 00024321 Basic dough A3 - 3,5 g х 2 pcCode 00018845 Basic dough A3,5 - 3,5 g х 2 pcCode 00024322 Basic dough В2 - 3,5 g х 2 pcCode 00025917 Basic dough C2 - 3,5 g х 2 pc
COMPOSITE MATERIAL FOR MAKING TEMPORARY ORTHOPEDIC CONSTRUCTIONS
ТEMPOCOR
АNALOGUES «Access Crown» — «Centrixl», USA
FOR USE
PURPOSEIs used for making temporary crowns, bridges, inlays
and onlays.
76ORTHOPEDIC DENTAL MATERIALS
MOULDING COMPOSITIONS AND ATTENDANT
MATERIALS
DENTAL WAXES
SOLDERS AND ALLOYS
CERMET FOR MAKINGDENTAL PROSTHESIS
VARNISHES
LIQUIDS FOR PROCESSING PRODUCTS
AND INSTRUMENTS
MATERIALS FORPROCESSING AND POLISHING
PRODUCTS
BELOLIT
BELOFORM
BELOWAXBASIC
MODELLING
IMMERSION
STICKY
BITE STICKS
MOLDING
FUSIBLE ALLOY
WIRE SOLDER
ULTROPALINE
COMPELAK
COMPELAK-S
ISALGIN
OTBEL
BELECT
POLISET
MATERIALS for dental technical laboratories
77
MATERIALS FOR DENTAL TECHNICIANS
BASIC
BITE STICKS
BELOWAX
IMMERSION
АNALOGUES: «Wax basic» - «Stoma», Ukraine,«Wax basic» «Аrmavir» — г. Аrmavir, Russia
FOR USE
АNALOGUES: «Tsipadent I II» - «Spofa Dental», Czech Republic,«Wax basic» — «Stoma», Ukraine
FOR USE
АNALOGUES: «Wax immersion» — «Stoma», Ukraine
FOR USE
PURPOSE
FEATURES
PACKAGING
Is used for modelling of bases of removable dentures, making of bite plates, for moulding individual impression spoons, spoons-bases and also its parts.
Dental wax contains paraffin, ceresin, natural resins, modifying additives.
0Melting temperature — 53-55 C.
Dental wax basic is produced of different fluidity: soft and hard.
Code 00024008 / 00006999 Plates (hard / soft) - 500 g
The translucent wax plates without inner stresses at soften condition easy unite with each other, don't stick to fingers.The basic wax moulds easy at heat condition and making at room temperature with sharp instruments. After the easy heat the wax plates have a smooth surface.
The basic wax doesn't leave traces on the china and plastic teeth and during the modelling base denture doesn't paint the plastic.
РURPOSE
FEATURES
PACKAGING
Are used for bite registration or definitions of occlusive relations toothless jaws of the patient.
Bite sticks are produced of wax composition which consists of paraffin, ceresin, natural resins, modifying additives.
0Softening temperature — 40-45 С.
Вite sticks are easily formed in hot condition and are processed at room temperature with sharp tool. No irritation of the tissues of oral cavity.
Code 00009308 Sticks -150 g (10 pc)
PURPOSE
FEATURES
PACKAGING
Is used for the manufacture of wax caps with a uniform wall thickness by way of dipping.
Immersion wax is wax composition which allows for making elastic wax cap.
о Working temperature — 85 С
Dipping time — 2 sec
Code 00022287 Truncated cones - 150 g
78
MOLDING
МОDELLING
STICKY
АNALOGUES:«Wax modelling» — «Stoma», Ukraine,
PURPOSE
FEATURES
PACKAGING
Is used for construction of runner system at casting metal details of dental prosthesis.
Dental wax «Belowax» molding is formed into wax line with composition of paraffin, ceresin, bees-wax, modified natural resins
оthat make wax line flexible and pliable at a temperature of 20-30 С. Is produced different of hardness :
џ super-soft yellowџ soft – blue; џ hard – green;џ super-hard – red
Due to the high plasticity of soft and super-soft lines are used to outline the functional-looking edges on the impressions before receiving a plaster model.
Wax molding of each type hardness (super-soft, soft, hard, super-hard) is produced in 2 forms:
– ;
PURPOSE
FEATURES
PACKAGING
Is used for manufacturing crowns, inserts, cast clammers, half-crowns, arches and carcasses of clasp dental prostheses and bridge prostheses by a method of casting on smelt models.
Basic components of wax are paraffin, ceresin, natural and synthetic resins, modifiers and coloring agents.
Is produced different fluidity: џ red - high fluidity and is intended for modelling precervical parts of crowns;џ blue - middle fluidity is applied to modelling an intermediate part of carcass of fixed dentures;џ green - low fluidity is used at modelling of basic elements of full fixed dentures.
Code 00025920 sticks different colors (red, blue, green) - 55 g Code 00025998 green - 65 gCode 00023939 red - 55 gСode 00021846 blue 55 g
PURPOSE
FEATURES
PACKAGING
Is used for bonding metal parts of prostheses in their preparation for soldering, and is also used for repairing prosthesis and connecting fragments of plaster models.
Wax sticky contains natural and synthetic waxes and resin, which provides good adhesion to metal and plaster (not less than 0,9 MPa). Dental wax has the necessary strength, has an easy to use form (sticks). Dropping temperature of sticky wax is at least 65°C, ash at temperature 500°C – no more than 0,2%.
In the heated sticky wax is good running and accurately connects the elements of the prosthesis.
Code 00012637 Cylindrical sticks - 50 g (10 pc)
DENTAL WAXES
Set of sticks Сode 00025919 Ø-2,0; 3,0; 5,0; 9,0 mm
Wax line on the spool Ø - 1,0; 1,5 mm 100 g Ø - 2,0; 2,5; 3,0; 3,5; 4,0; 5,0 mm 250 g
79MATERIALS FOR DENTAL TECHNICIANS
BELOWAXDENTAL WAXES
g
АNALOGUES «Brevest», — «Bredent», Germany«Deguvest» — «Degussa», Germany'«Univest» — «Polident», Slovenia
FOR USE
UNIVERSAL MOLDING MATERIALON PHOSPHATE BONDING
BELOFORM
PURPOSEIs used for producing exact casting moulds. These moulds
are used then for casting whole piece fixed prostheses and dentures using refractory and precious alloys.
FEATURES
PACKAGING
Universal dental moulding material «Beloform» contains in the structure phosphate, polydisperse quartz, cristobalite, fire-resistant knitting substances, and also colloid liquid with modifying and stabilizing additives.
Characteristics of dental moulding materia «Beloform»:· Working time of moulding mass (by 21-23?С) - 5 min; · Fluidity -120 mm;· Hardening time -7-10 min.· Compression strength (in 2 hours) - not less than 4,0 MPа; · Compensative widening by hardening - 1,2±0,1%; · Thermal widening by 900?С - 1,3±0,1%; · General widening - 2,5±0,2%.
Мaterial «Beloform» can be used by conditions of 2- «step» order and order of «shock» casting.
Code 00026099 Powder - 160 g х 12 pc; Liquid 500 mlСode 00005098 Powder - 160 g; Liquid- 38 ml
Produced separately: Code 00005015 / 00004868 Powder - 160 g х 32 / 25 kgCode 00005022 / 00004599 Liqud - 1 l / 5 l
VARNISH FOR CASTING
BELOLIT
АNALOGUES «WNM» — «Voco», Germany
FOR USE
FEATURES
PACKAGING
«Belolit» varnish contains solvent with plasticizer and film-former. Prepared wax pattern should be treated with varnish at a distance of 10-15 cm spraying it uniformly across the whole surface.
o oThe excess varnish should be blown off with airflow. The wax pattern should be dried for 10-15 minutes (at to 20 C-25 C), then coating layer should be applied.
Сode 00026098 Liquid-spray - 500 ml
PURPOSEIs used for covering wax patterns before coating when
casting steel and chromcobalt alloys using silicate moulds. The varnish provides a precise reproduction of a pattern and easy mould separation from coating layer.
80MATERIALS FOR DENTAL TECHNICIANS
BELOFORMBELOFORM ORTHOPEDIC
DENTAL MATERIALS
BELECT
PURPOSEPowder «Belect» is used in sand-blast systems for
removing packing mass, for preparing frames before kilning, for removing excess ceramic mass and for treating surface of cobalt-chromic alloys.
FEATURES
PACKAGING
«Belect» is a material of white color based on electrocorundum, causing no silicosis and containing 99,5% Al2O3. The material features high strength (a bit less than that of diamond) and high safety.
Powder «Belect» is produced according fractions:Grain size Powder granularity Use
90-75 mkm granularity №6 For removal of moulding material, training frameworks and the creation of
mechanical retentional surfaces before firing.106-90 mkm granularity №8 For removal of moulding material, training frameworks and the creation of
mechanical retentional surfaces before firing. 125-106 mkm granularity №10 For removal of moulding material and oxide film from alloys with a small
content of precious metals, processing of carcasses and creation of mechanical retentional surfaces before firing.
150-125 mkm granularity №12 For removal of moulding material, training frameworks before firing, removal of surpluses of the ceramic mass of the metal-ceramic crowns. 300-250 mkm granularity №25 For removal of moulding material, processing of surfaces of noble and non-precious alloys, training frameworks before firing. 355-300 mkm granularity №32 For removal of moulding material, surface treatment of chrome cobalt alloys, training frameworks of base alloys before firing. 40-50 mkm granularity М50 For removal of moulding material, excess ceramics with the metal-ceramic crowns, the oxide film with the frameworks of the
precious alloys, ceramic processing before glazing.
Code 00001892 Powder Belect N6 - 5kg; Code 00002113 Powder Belect N8 - 5kg; Code 00001289 Powder Belect N10 -5 kg; Code 00001840 Powder Belect N12 - 5 kg;Code 00000136 Powder Belect N25 -5 kg;Code 00000137 Powder Belect N32 - 5 kg;Code 00003812 Powder Belect N50 - 5kg;
SET OF ABRASIVE ELECTROCORUNDUM POWDERS
81 MATERIALS FOR DENTAL TECHNICIANS
VARNISH COMPENSATING
COMPELAK
АNALOGUES «Die spacer» — «Bredent», Germany
FOR USE
FEATURES
PACKAGING
The varnish is a viscous coloured liquid which gives an unshrinkable film when being dried. The thickness of its one layer is 8 to 11 micrometers.
Code 00000053 Compensating varnish - 15 mlCode 00000056 Separating liquid - 15 mlCode 00000059 Solvent - 15 ml
PURPOSEIs intended for a partial compensation of shrinkage when
unit-cast dental prostheses are fabricated.
82MATERIALS FOR DENTAL TECHNICIANS
SEPARATING VARNISH
ISALGIN
АNALOGUES «Markit Spray» — «Voco», Germany«Isodent» — «Spofa Dental», Czech Republic«Devosept» — «Vertex», Holland
FOR USE
PURPOSEIs used as separating varnish in dental technician practice.
FEATURES
PACKAGING
«Isalgin» separating varnish is based on sodium alginate. It forms the film on the surface of plaster mould and prevents bonding gypsum to plastics.
Coating a gypsum mould with «Isalgin» separating varnish should follow removal of wax from the gypsum surface and degreasing the mould by means of sufficient water boiling.
Code 00001233 / 00018711/ 00025923 Varnish - 125 ml / 500 ml / 1 l
FUSIBLE ALLOY
АNALOGUES «Fusible alloy» — «Medpolymer», Russia
FOR USE
PURPOSEIs used for making dies, crown-patterns, clammers and
clasp prostheses.
FEATURES
PACKAGING
The alloy melting temperature is 96°C, it is solid but easily treated, it features high casting qualities and minimal shrinking at cooling.
The alloy contains of bismuth, tin, lead and other metals.
Code 00000120 Pill - 60 g
SHTUMFLAK
COMPELAK S
АNALOGUES «Forcron» — «Stl», Ukraine
FOR USE
FEATURES
PACKAGING
The varnish is a viscous coloured liquid which by laying on a model is not absorbed in a gypsum and gives an unshrinkable film when being dried out during 3-5 by a thickness 10-15 mkm.
Code 00000134 Varnish - 12 ml
PURPOSEIs used by making unit-cast dental prostheses for making
intermediate layer on the gypsum model of stump of tooth with the purpose of formation of the controlled from distance gap under a fixative cement and also indemnifications of shrink of metal.
83MATERIALS FOR DENTAL TECHNICIANS
PURPOSE
FEATURES
PACKAGING
Is used for polishing plastic prosthesis.
Powder «Poliset» contains abrasive different milling.
Code 00012037 / 00001303 Powder - 2 kg / 4 kg
PURPOSE AND FEATURES
PACKAGING
«Poliset» doughs for polishing dental products contain an abrasive, a surfactant and bonding agents. «Poliset ? 4» dough on water-soluble base contains different abrasives providing effective polishing plastic dentures without
scratching them.
Code 00000111 Dough № 1 - 50 g Code 00026074 Dough № 1 - 50 g х 4 pcCode 00000112 Dough № 2 - 50 g Code 00026075 Dough № 2 - 50 g х 4 pc Code 00010057 Dough № 2 - 120 gCode 00000113 Dough № 3 - 50 g Code 00026076 Dough № 3 - 50 g х 4 pcCode 00001632 Dough № 4 - 400 g
Code 00000109 Set: Dough № 1, № 2, № 3 - 50 g х 3 pc
Produced as set and separately.
POLISETMATERIAL FOR POLISHING DENTAL PRODUCTS
АNALOGUES «Tigerbrillant polishing paste» — «Dentaurum», Germany«Schuel-Denta — «Spofa Dental», Czech Republic
FOR USE
POLISHING POWDER
АNALOGUES «Schuel - Dental» — «Spofa Dental», Czech Republic
FOR USE
PURPOSEDoughs «Poliset» are used:
POLISET №1 — for polishing products made of stainless steel,copper, nickel and chrome cobalt alloys;
џ POLISET №2 — for polishing plastic prostheses;
џ POLISET №3 — for polishing ceramics and plastics;
џ POLISET №4 — for polishing for dentures made of plastics.
SOLUTION FOR WHITENING STAINLESS STEEL
OTBEL
PURPOSE AND FEATURESThe solution is represented by mixture of non-
concentrated hydrochloric and nitrous acids and is used for removal of the film from stainless steel after thermal treatment.
PACKAGINGCode 00001316 / 00007019 / 00004631 Liquid - 125 ml / 1,0 / 3,0 l
84MATERIALS FOR DENTAL TECHNICIANS
ULTROPALINE
PURPOSE«Ultropaline» is an universal porcelain mass used for
facing unit-cast ceramic frames when producing cermet crowns and dental bridges. It is produced by firm «VladMiVa» together with «Jendental»(Ukraine).
FEATURES
PACKAGING
«Ultropaline» ceramic mass meets all the requirements made to cermet materials. «Ultropaline» ceramic mass is obtained by mixing clean oxides, hydroxides or salts, their alloying at temperature 1400°C and further ceramization. «Ultropaline» porcelain mass is a synthetic ceramic mass. «Ultropaline» thermal expansion characteristics are identical to those of cermet masses used nowadays. Due to small size of leucite microcrystallites and their high density, «Ultropaline» mass features high mechanical strength and flexural strength. Preliminary cast and oxidized prosthesis should be covered with 2-3 layers of opaquer and then dried out and burned. Opaque mass is intended for providing chemical and mechanical bonding of porcelain mass with frame metal surface. It is also used to hide oxide layer of metal and to provide the necessary colour of metal cap. Opaquer features high adhesion to oxide layer of frame, high fluidity at high temperatures, good covering capacity and low shrinkage at burning. When producing main part of prosthesis, dentine mass is used. It provides the natural colour of the tooth. To obtain good optic characteristics, opaque-dentine and cervical masses, opalescent modifier and transparent agents are used. Half-finished products are burned in the oven. To obtain glitter and to increase mass strength, the prostheses should be covered with glaze and glazing paints before final burning. «Ultropaline» set includes materials of different colours according to Vita-Lumin scale and it allows make the prostheses more like to natural teeth.
Code 00001081 «Ultropaline» 16-colored set: Powdered dentines, 16 colours 30g each (A1; A2; A3; A3,5; A4; B1; B2; B3; B4; C1; C2; C3; C4; D2; D3; D4) Powdered enamels, 4 types of transparency 30g each (S57; S58; S59; S60) Powdered cervical masses, 4 types 30g each (CA; CB; CC; CD) Powdered transparent, 30g (T) Opalescent modifier, 30g (Opal) Liquid for modeling dentine and enamel, 2pc 40ml each Opaque dough, 16 colours 4g each (A1; A2; A3; A3,5; A4; B1; B2; B3; B4; C1; C2; C3; C4; D2; D3; D4) Dough glaze, 2 syringes 4g each. Glaze paint, 2 syringes 4g each (light, brown, ochre) Code 00002485 «Ultropaline» 9-colored set: Dentine, 9pc 30g each (A2; A3; A3,5; B2; B3; C2; C3; D2; D3) Enamel, 6pc 30g each (S57; S58; S59-3pc; S60) Opalescent modifier, 30g (Opal) Transparent, 30g (T) Opaquer, 9pc 4g each (A2; A3; A3,5; B2; B3; C2; C3; D2; D3) Glaze, 4g Glaze paint 2 syringes 4g each (light, brown, ochre) Liquid for mixing, 2pc 40ml each«Ultropaline» test set – 2 colored A2 and A3:Dentine – powder 30 g;Opaquer – syringe 4 g;Enamel – powder 30 g;Glaze – syringe 4 g.«Ultropaline» painter set:Glaze – 2 syringes 4 g each;Painters - 10 syringes 4 g each (Yelow, Blue, Blue Grey, Red Gum; Light Ochre; Grey Ochre; Light Brown; Brown; Dark Brown).Powdered opaquers set «Ultrapoline»:Universal – powder 6 pc. 20 g each (OA2, OA3, OA3,5;OB2, OC2, OD2).As order – powder 6 pc. 20 g each (Coloures are defined by client).Dentine set «Ultrapoline»:Universal – powder 6 pc. 20 g each (DA2, BA3, DA3,5;DB2, DC2, Dd2).As order – powder 6 pc. 20 g each (Coloures are defined by client).Intensive-dentine set «Ultrapoline»:Universal – powder 6 pc. 30 g each (White, Blue, Brown, Grey, Ochre, Red Gum).As order – powder 6 pc. 30 g each (Coloures are defined by client).Separate colours of different materials:Dentine – powder 30 g.Enamel – powder 30 g.Cervical mass – powder 30 g.Transparent – powder 30 g.Opalescent modifier (enamel) – powder 30 g.Liquid for modeling dentine and enamel (permanent and pink) – 50 ml, 180 ml.Opaquer – dough – syringe 4 g.Glaze – dough - syringe 4 g.Glaze painter – syringe – 4 g.Transparent Opal – powder 30 g.Intensive-dentine (White, Blue, Brown, Grey, Ochre, Red Gum) powder 30 gOpaquer – powder (116 colours Vita) – powder 20 g.super transparent – powder 30 g.Opalescent modifier (SO) (Rose, Yellow, Blue) – powder 30 g.super transparent Opal (OST) (Super transparent enamel mass which has features of opalescence) – powder 30 g.Opaque-dentine (9 tones) – powder 30 g.Colouring of painters «Ultrapoline»
ULTROPALINE
CERAMICCRUCIBLES
FOR INDUCTION CASTING UNITS
Ceramic crucibles are used for melting metals and alloys used in prosthetic dentistry for the manufacture of cast crowns, gaps, bridges and other metal components of dentures in dental clinics, laboratories and workshops. Crucibles are available for various types of furnaces induction heating of casting installations HF imported and domestically produced.
Ceramic crucibles are produced using a unique technology based on amorphous silica nanopowder systems that provide them with high heat resistance and corrosion resistance.
85MATERIALS FOR DENTAL TECHNICIANS
Fornax 00005472Fornax with cap 00009042Fornax -35 00024692 Manfredy middle 00001381Manfredy middle with cap 00022130Manfredy little 00007470Manfredy little with cap 00009043Manfredy big 00024759
Minimax 00005645Degutron 00006823NH-Dent 00007111Dukatron 00007299Dyukatron 00007684Degussa 00010100
0000708500007055
Aloi 00015609Кastomat 00010257Ivocast 00023952Ivocast-2 00024757Leningradskiy little 00005650
WCHI 00024677
WCHI-10 00024758Gelenko 00024747
Sparkdon 00024690
Dako 00024688Kyultser 00024691
Yugin 00024693
Code Typ of casting unitSizes, mm (+ 1%)
CRUCIBLE LIST
d
83,0 83,0 8,5
76,5 76,5 -
68,0 68,0 13,0
104,0 104,0 -
66,0 58,5 8,5
63,0 54,0 8,5
77,5 71,5 8,5
78,0 78,0 8,5
67,0 48,0 8,5
69,5 69,5 8,5
75,0 75,0 8,5
70,0 70,0 8,5
71,0 71,0 8,5
80,0 80,0 8,5
68,0 59,0 8,5
68,0 59,0 8,5
69,5 69,5 8,5
69,0 69,0 8,5
77,5 77,5 8,5
70,0 70,0 13,0
67,4 67,4 6,0
66,0 60,0 8,5
78,0 78,0 8,5
77,5 77,5 8,5
78,0 78,0 8,5
73,0 73,0 8,5
85,5 85,5 9,5
108,0 108,0 -
d
* type of casting unit
Ceramic crucibles provide reliable operation under tough conditions of their operation in conditions of induction heating of the metal when heated to its melting point metal to about
о 1350-1550 С occurs very rapidly (within 0.5-1.0 min.). It should be noted that the heating is uneven, since the amount of molten metal in it is 10-15% of the crucible, which complicates the conditions of service of the crucible.
Crucibles are manufactured for all major models of casting units manufactured by both domestic producers and by leading foreign companies.
Crucible samples different configurations which produced
86MATERIALS FOR DENTAL TECHNICIANS
Fornax* Fornax with cap* Fornax -35*
Manfredy middle*
Manfredy middle with cap*
Manfredy little*Manfredy little with cap*
Manfredy big* Minimax*
Degutron* NH-Dent* Dukatron*
Dyukatron* Degussa* *
* type of casting unit
In addition to the crucibles, ceramic bowls are available (small, medium, large) for the smelting of precious metals, pallets for muffle furnaces and much more. At your request (according sample or drawing) can be manufactured other configurations of crucibles for any type casting units.
for different types of casting units
87MATERIALS FOR DENTAL TECHNICIANS
Aloi* Кastomat*
Ivocast-2*Ivocast* Leningradskiy little*
WCHI* WCHI-10* Gelenko*
Sparkdon * Dako* Kyultser*
Ygin*
*
FEATURESThe base and material for the shank production is stainless
steel with nickel protective and decorative coating that provides
PURPOSEAre intended for processing of hard tooth tissues and other
materials used in dentistry, while working with different dental tips in clinical conditions.
Burs with diamond heads «RosBel» are used for all kinds of dental work: preparation, correction, turning, leveling, cosmetic finishes, etc. Burs are used in a variety of materials: enamel, dentine, jaw bone, amalgam, ceramics, porcelain, cement, metal alloys, composite materials, and precious metals.
NUMERIC CODES ACCORDING ISO
A
806___ 31 4 _____ 168 __ 534 __014A B C D E F
F
D BE
- diamondA instrument
- shankB type
С
С
- overall length
- form ofD working part
- size ofE diamond grain
F -maximal diameter of
working part
green 160 coarse for fast processing of tooth
for fast processing of tooth
534
yellow 30 extra-finefor processing and smoothing edges of composite fillings
504
red 50 fine for finish processing514
blue 70-130 middle for universal processing of tooth524
544 black 180 extra-coarse
CODE COLOR GRAINSIZE (mkm)
PURPOSE
494 white 15 ultra-fine for finish processing of fillings
COLOR CODES
angle tip
angle tip
204standard (22, 24, 27 mm)
SHANK TYPES CODE OVERALL LENGTH SHANK DIAMETER
straight tip 104standard (44,5 ± 0,5 mm)
oblong (22, 24, 26 mm)205
SHANK TYPES
turbine tip
turbine tip
turbine tip
standard (19, 21, 22, 24, 26 mm)
oblong (21, 24 mm)
314
315
316
2,35 mm
2,35 mm
2,35 mm
Æ
Æ
Æ
Æ
Æ
Æ
1,60 mm
1,60 mm
1,60 mmlong (25 mm)
LIST OF BUR PARAMETERS
DIAMOND INSTRUMENTS
DENTAL BURS with diamond heads «ROSBEL»
88
the necessary corrosion resistance of the product. Additional spraying of titanium nitride or double t aluminum improves the technical characteristics of burs and increases tool life. Diamond layer of heads is composed of diamond powder and metal binder of galvanic nickel.
Burs with diamond heads «RosBel» are produced of different forms and sizes of shank and working part and granularity of diamond powder. According to shank construction burs are classify to types:
·for fixing in angle tips; ·for fixing in straight tips; ·for fixing in turbine tips.
The main working characteristic of bur is its granularity. Dental diamond burs are produced of 6 types depending on the size of the diamond grains. Each type corresponds to a special numeral and color codes which are marked on the tool or on the packing. Coding conforms to generally accepted international standards.
nitride itanium
DIAMOND INSTRUMENTS
PACKAGING FORMS OF WORKING PART
Burs with natural diamond — in blisters of 10 pc.
Burs with natural diamond — in plastic box of 5 pc.
Demonstration set for dealers and trading companies
stand for burs with 50 cells for alltypes of tip
89
001 Spherical;
002 Spherical combined with conic working neck;
697 Spherical long (surgical);
010 Inverted cone;
019 Inverted cone combined with conic working neck;
032 Combined double-conic with connected cones in the top;
225 Inverted cone oblong;
038 Combined double-conic with connected cones at the founding;
041, 042 Wheel-shared;
068 Wheel-shared with rounded sides;
109,110,111 Cylindrical;
150 Cylindrical end-shared;
129 Cylindrical with cone on the end;
130,131 Cylindrical with a cone on the edge;
139,140,141,142,143 Cylindrical with a hemisphere on the end;
165,166,167 Conic;
170,171,172,173 Conic truncated;
197,198,199 Conic truncated with a half-sphere on the end;
233,238,239 Inverted cone with a half- sphere on the end (Pear-shaped);
243 Candle-shared;
249,250,251 Bullet-shared;
257 Flame-shared wide;
277 Elliptic linear;
297,298,299 With the conic working
neck and a cone on the end;
304 Lens-shared;
551,552 Cylindrical with a wavy working part;
554,555 Conic with a wavy working part;
465 Interdental
274 Parabolic, long
DISKSDENTAL DIAMOND
DISKSDENTAL DIAMOND (STONES)
TWO-SIDED DIAMOND STONES
STANDARD
9
4
12
4
16
4
ONE-SIDED DIAMOND DISKS
TWO-SIDED DIAMOND DISKS
STANDARD
STANDARD
THIN
SUPER-THIN
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
Diameter, mm
Thickness,mm
16
0,35
20
0,35
22
0,35
16
0,35
20
0,35
22
0,35
16
0,2
20
0,2
22
0,2
16
0,12
20
0,12
22
0,12
16
0,3
20
0,3
22
0,3
16
0,17
20
0,17
22
0,17
16
0,35
20
0,35
22
0,35
16
0,35
20
0,35
22
0,35
16
0,35
20
0,35
22
0,35
16
0,2
20
0,2
22
0,2
16
0,12
20
0,12
22
0,12
16
0,3
20
0,3
22
0,3
16
0,17
20
0,17
22
0,17
PURPOSE
FEATURES
Disks diamond dental are intended for separation, contouring and cutting ceramics, metal ceramics, metals, solid plastic, gypsum, as well as the simulation of interdental spaces, preparation and finishing of hard tissues of the tooth and filling materials.
Disk construction with holes and openings of different configurations alloys:·effectively remove the products of cutting of the treatment area, significantly improving the review and the cooling of
the workpiece;· create thin interdental cracks;· with high accuracy separated not only ceramics, but and metal, parts of small thickness.
PACKAGING Disks of one type-size 25 pcIndividual cell for disks 5 pc
Dental disks are produced: ·super-thin (thickness no more 0,1 mm);·thin (thickness no more 0,4 mm);·thick (STONES) (thickness not less 3,5 mm).
90DIAMOND INSTRUMENTS
PURPOSE
FEATURES
Is used for cleaning and disinfecting small dental diamond instruments.
Liquid consists of:џ complex-former;џ antiseptic;џ water.
1 cap of concentrate should be dissolved with 100 ml of water. This solution contains 0.01% - 0.02% of disinfect components. The instruments should be put into solution for 5-10 minutes, then removed and washed. In case of high contamination, the solution should be changed. Avoid contact with eyes and skin.
PACKAGINGСode 00001232 / 00026097 Liquid 125 ml / 500 ml
FOR CLEANING DIAMOND INSTRUMENTS(CONCENTRATE)
LIQUID
АNALOGUES «UL 10» — «Voco», Germany
FOR USE
SCHEME OF DISINFECTION AND PRESTERILIZATION PROCESSING OF DENTAL BURS
WITH DIAMOND HEADS «ROSBEL»
Burs presoak in the solution of«Liquid for cleaning diamond instruments
«VladMiVa» at 5-10 min.
Washed under running waterduring 1-2 min.
Immerse in a 2% solution of liquid «Megadez» at 45 min.
Washed under running water 5 min. and sterilize in autoclave
0 by temperature 132 С during 20 min.
1
2
3
4
91DIAMOND INSTRUMENTS