documentyo
DESCRIPTION
yesTRANSCRIPT
PART-I
Level Measurement
1. Level Gauge (including magnetic level gauge)2. Differential Pressure Type Level Transmitter3. Radar Level Transmitter4. Guided Waver Radar Level Transmitter5. Displacer/Float Level Transmitter6. Servo Level Transmitter7. Tuning Fork Type8. Nucleonic Type
Flow Measurement
1. Orifice Plates (square edged concentric, quadrant edge etc.)2. Restriction Orifice Plates 3. Multi-Restriction Orifice Plates4. Integral Orifice (Meter Run)5. Venturi Tubes6. Nozzles and Venturi Nozzles7. Average Pitot Tube8. Rotameter9. Ultrasonic Flowmeter10. Coriolis Mass Flowmeter11. Vortex Flowmeter12. Turbine Flowmeter13. Positive Displacement Type Flowmeter14. Magnetic Flowmeter
Temperature Measurement
1. Temperature Gauges2. Thermowells (Van Stone, Built-Up)3. RTDs and Thermocouples4. Skin Thermocouples5. Multi-Point Temperature Transmitters
Pressure and Differential Pressure Measurement
1. Pressure Gauges (including draft gauges) and Differential Pressure Gauges2. Pressure and Differential Pressure Transmitters
Control Valves (including On-Off Valves and Self Actuating Control Valves)
Pressure Relieving Devices
PART-II
Communication Protocols
1. Foundation Fieldbus2. PROFIBUS3. HART4. 4-20mA5. MODBUS, RS-232 and RS-485
PART-III
System Architecture and Concepts
1. DCS2. PLC3. SCADA4. RTU5. SIS
PART-IV
Hazardous Area Classification
1. Area Classification2. Intrinsically and Non-Intrinsically Safe3. Entity Concept4. Explosion Proof5. FISCO, FNICO and High Powered Trunk
PART-V
Packages
1. Compressors2. Anti-Surge Control System3. Machine Monitoring System4. Blending Automation System5. Desuperheaters6. Tank Farm Management System7. Terminal Automation System
PART-VI
1. Instrument Connection (Size, Rating, and Connection Type)
2. Instrument and Piping Material3. Special Service Requirements
PART-VII
Bulk Material
1. Installation Standards2. Tubing and Tube Fittings3. Cables (FF, Thermocouple extension etc.)4. Junction Boxes
PART-VIII
Process Stream Analyzers and Detectors
PART-IX
Engineering for Design
Engineering for Procurement
Engineering for Construction
Construction Supervision
Commissioning Assistance
PART-X
Offshore
1. Process 2. Equipments3. Job Work
PART-XI
Business into- Oil and Gas Industry Process (Upstream, Mid-Stream, Down Stream)
Job Modes and Stages